AI Avatar Kids

AI Avatar Kids — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Linux color management

  Linux color management has the same goal as the color management systems (CMS) for other operating systems, which is to achieve the best possible color reproduction throughout an imaging workflow from its source (camera, video, scanner, etc.), through imaging software (Digikam, darktable, RawTherapee, GIMP, Krita, Scribus, etc.), and finally onto an output medium (monitor, video projector, printer, etc.). In particular, color management attempts to enable color consistency across media and throughout a color-managed workflow. Linux color management relies on the use of accurate ICC (International Color Consortium) and DCP (DNG Color Profile) profiles describing the behavior of input and output devices, and color-managed applications that are aware of these profiles. These applications perform gamut conversions between device profiles and color spaces. Gamut conversions, based on accurate device profiles, are the essence of color management. Historically, color management was not an initial design consideration of the X Window System on which much of Linux graphics support rests, and thus color-managed workflows have been somewhat more challenging to implement on Linux than on other OS's such as Microsoft Windows or macOS. This situation is now being progressively remedied, and color management under Linux, while functional, has not yet acquired mature status. Although it is now possible to obtain a consistent color-managed workflow under Linux, certain problems still remain: The absence of a central user control panel for color settings. Some hardware devices for color calibration lack Linux drivers, firmware or accessory data. Since ICC color profiles are written to an open specification, they are compatible across operating systems. Hence, a profile produced on one OS should work on any other OS given the availability of the necessary software to read it and perform the gamut conversions. This can be used as a workaround for the lack of support for certain spectrophotometers or colorimeters under Linux: one can simply produce a profile on a different OS and then use it in a Linux workflow. Additionally, certain hardware, such as most printers and certain monitors, can be calibrated under another OS and then used in a fully color-managed workflow on Linux. The popular Ubuntu Linux distribution added initial color management in the 11.10 release (the "Oneiric Ocelot" release). == Requirements for a color-managed workflow == Accurate device profiles obtained with source or output characterization software. Correctly loaded video card lookup tables (LUTs) (or monitor profiles that do not require LUT adjustments). Color-managed applications that are configured to use a correct monitor profile and input/output profiles, with support for control over the rendering intent and black point compensation. Calibration and profiling requires: for input devices (scanner, camera, etc.) a color target which the profiling software will compare to the manufacturer-provided color values of the target. or for output devices (monitor, printer, etc.) a reading with a specific device (spectrophotometer, colorimeter or spectrocolorimeter) of the color patch values and comparing the measured values against the values originally sent for output. === Monitor calibration and profiling === One of the critical elements in any color-managed workflow is the monitor, because, at one step or another, handling and making color adaptation through imaging software is required for most images, thus the ability of the monitor to present accurate colors is crucial. Monitor color management consists of calibration and profiling. The first step, calibration, is done by adjusting the monitor controls and the output of the graphics card (via calibration curves) to match user-definable characteristics, such as brightness, white point and gamma. The calibration settings are stored in a .cal file. The second step, profiling (characterization), involves measuring the calibrated display's response and recording it in a color profile. The profile is stored in an .icc file ("ICC file"). For convenience, the calibration settings are usually stored together with the profile in the ICC file. Note that .icm files are identical to .icc files - the difference is only in the name. Seeing correct colors requires using a monitor profile-aware application, together with the same calibration used when profiling the monitor. Calibration alone does not yield accurate colors. If a monitor was calibrated before it was profiled, the profile will only yield correct colors when used on the monitor with the same calibration (the same monitor control adjustments and the same calibration curves loaded into the video card's lookup table). macOS has built-in support for loading calibration curves and installing a system-wide color profile. Windows 7 onward allows loading calibration curves, though this functionality must be enabled manually. Linux and older versions of Windows require using a standalone LUT loader. === Device profiles === ICC profiles are cross-platform and can thus be created on other operating systems and used under Linux. Monitor profiles, however, require some additional attention. Since a monitor profile depends both on the monitor itself and on the video card, a monitor profile should only be used with the same monitor and video card with which it was created. The monitor settings should not be adjusted after creating the profile. In addition, since most calibration software use LUT adjustments during calibration, the corresponding LUTs must be loaded every time the display server (X11, Wayland) is started (e.g. with every graphical login). In the unlikely case of a colorimeter being unsupported by Linux, a profile created under Windows or macOS can be used under Linux. === Display-channel lookup tables === There are two approaches to loading display channel LUTs: Create a profile that does not modify video card LUTs and thus does not require LUTs be loaded later on. Ideally, this approach would rely on DDC-capable monitors—the internal monitor settings of which are set via calibration software. Unfortunately, monitors capable of making these adjustments through DDC are not common and are generally expensive. There is only one calibration software on Linux that can interact with a DDC monitor. For mainstream monitors, a couple of options exist: BasICColor software, which works with most colorimeters on the market, allows one to adjust display output via the monitor interface, and then to choose a "Profile, do not calibrate" option. By doing this, one can create a profile that does not require video card LUT adjustments. For EyeOne devices, EyeOne Match allows the user to calibrate to "Native" gamma and white point targets, which results in the LUT adjustment curves displayed after the calibration as a simple, linear 1:1 mapping (a straight line from corner to corner). Both BasICColor and EyeOne Match do not presently run under Linux but they are capable of creating a profile that does not require LUT adjustments. Use an LUT loader to actually load the LUT adjustments contained within the profile prepared during calibration. According to the documentation, these loaders do not modify the video card LUT by itself, but achieve the same type of adjustment by modifying the X server gamma ramp. Loaders are available for Linux distributions that use X.org or XFree86—the two most popular X servers on Linux. Other X servers are not guaranteed to work with the currently available loaders. There are two LUT loaders available for Linux: Xcalib is one such loader, and although it is a command-line utility, it is quite easy to use. dispwin is a part of Argyll CMS. If, for any reason, the LUT cannot be loaded, it is still recommended to go through the initial stages of calibration where a user is asked by calibration software to make some manual adjustments to the monitor, as this will often improve display linearity and also provide information on its color temperature. This is especially recommended for CRT monitors. === Color-managed applications === In ICC-aware applications, it is important to make sure the correct profiles are assigned to devices, mainly to the monitor and the printer. Some Linux applications can auto-detect the monitor profile, while others requires that it is specified manually. Although there is no designated place to store device profiles on Linux, /usr/share/color/icc/ has become the de facto standard. Most applications running under WINE have not been fully tested for color accuracy. While 8-bpp programs can have some color resolution difficulties due to depth conversion errors, colors in higher-depth applications should be accurate, as long as those programs perform their gamut conversions based on the same monitor profile as that used for loading the LUT, granted that the corresponding LUT adjustments are loaded. == List of color-managed applications == darktabl

  Read more →
• 

  VSCO

  VSCO ( ), formerly known as VSCO Cam, is a photography mobile app available for iOS and Android devices. The app was created by Joel Flory and Greg Lutze. The VSCO app allows users to capture photos in the app and edit them, using preset filters and editing tools. == History == Visual Supply Company was founded by Joel Flory and Greg Lutze in California, in 2011. VSCO was launched in 2012. It raised $40 million from investors in May 2014. In 2017, VSCO launched a subscription model. As of 2018, Visual Supply Company has $90 million in funding from investors and over 2 million paying members. In 2019, VSCO acquired Rylo, a video editing startup founded by the original developer of Instagram’s Hyperlapse. Visual Supply Company has locations in Oakland, California, where it is headquartered, and Chicago, Illinois. In December 2020 VSCO acquired AI-powered video editing app Trash. In April 2018, VSCO reached over 30 million users. In September 2023, Eric Wittman was appointed as the new CEO and co-founder Joel Flory became executive chairman. == Usage == Users must register an account to use the app. Photos can be taken or imported from the camera roll, as well as short videos or animated GIFs (known in the app as DSCO; iOS only). The user can edit their photos through various preset filters, or through the "toolkit" feature which allows finer adjustments to fade, clarity, skin tone, tint, sharpness, saturation, contrast, temperature, exposure, and other properties. Users have the option of posting their photos to their profile, where they can also add captions and hashtags. Photos can also be exported back into the camera roll or shared with other social networking services. The users also have an option to edit their own videos from their camera roll with the VSCO yearly membership, but they are not able to post camera roll as VSCO Film X videos to their account on VSCO. JPEG and raw image files can be used. Research on image based social media platforms has found that engagement with posting, editing, and interacting with images can influence users' mood, self esteem, and body satisfaction. Studies also suggest that greater emotional investment in social media content is associated with increased negative psychological outcomes including stress and depressive symptoms. == In popular culture == VSCO's Oakland headquarters was a key filming location for Boots Riley's 2018 film Sorry to Bother You.

  Read more →
• 

  Mozilla VPN

  Mozilla VPN is an open-source virtual private network developed by Mozilla. It launched in beta as Firefox Private Network on September 10, 2019, and officially launched on July 15, 2020, as Mozilla VPN. Mozilla VPN should not be confused with the built-in VPN in Firefox since version 149 released in March 2026, which is free with a monthly data limit of 50 GB but only masks traffic that originates in Firefox unlike Mozilla VPN that protects the entire device. == History == The Firefox Private Network web browser extension beta version was released on September 10, 2019, as part of the relaunch of Mozilla's Test Pilot Program, a program that allowed Firefox users to test experimental new features which had been shuttered in January 2019. The beta of the subscription-based standalone virtual private network for Android, Microsoft Windows, and Chromebook launched on February 19, 2020, with the iOS version following soon after. Firefox Private Network was rebranded as "Mozilla VPN" on June 18, 2020, and officially launched as Mozilla VPN on July 15, 2020. At launch, Mozilla VPN was available in six countries (the United States, Canada, the United Kingdom, Singapore, Malaysia, and New Zealand) for Windows 10, Android, and iOS (beta). Over time, the service also launched in Germany, France, Italy, Spain, Switzerland, Austria, Belgium, Netherlands, Ireland, Finland, Sweden, Poland, Czechia, Hungary, Romania, Bulgaria, Slovakia, Portugal, Denmark, Croatia, Lithuania, Slovenia, Latvia, Luxembourg, Estonia, Cyprus, and Malta. == Audits history == Cybersecurity firm Cure53 conducted a security audit for Mozilla VPN in August 2020 and identified multiple vulnerabilities, including one critical-severity vulnerability. In March 2021, Cure53 conducted a second security audit, which noted significant improvements since the 2020 audit. The second audit identified multiple issues, including two medium-severity and one high-severity vulnerability, but concluded that by the time of publication, only one vulnerability remained unresolved, and that it would require "a strong state-funded attacker-model" to be exploitable. Mozilla disclosed most of the vulnerabilities in July 2021 and released the full report by Cure53 in August 2021. In April 2023, Cure53 conducted a third security audit, the results of which Mozilla disclosed in December that year, along with the full report by Cure53. == Features == Mozilla VPN masks the user's IP address, hiding the user's location data from the websites accessed by the user, and encrypts all network activity. The service allows for up to 5 simultaneous connections, to any of more than 500 servers in 30+ countries, and is available on the mobile operating systems iOS and Android and the desktop operating systems Microsoft Windows, macOS and Linux. Mozilla VPN's infrastructure is provided by the Swedish Mullvad VPN service, which uses the WireGuard VPN protocol. The VPN software comes with additional features, like recommended server locations, the ability to block ads, block ad trackers and malware, the ability to exclude certain applications from protection, the ability to set multi-hop connections, and to set custom DNS servers. When used with Firefox and the official extension, Mozilla VPN allows the use of different settings per container as well as bypassing the VPN for specific websites.

  Read more →
• 

  Zero-day vulnerability

  A zero-day (also known as a 0-day) is a vulnerability or security hole in a computer system unknown to its developers or anyone capable of mitigating it. Until the vulnerability is remedied, threat actors can exploit it in a zero-day exploit, or zero-day attack. The term "zero-day" originally referred to the number of days since a new piece of software was released to the public, so "zero-day software" was obtained by hacking into a developer's computer before release. Eventually the term was applied to the vulnerabilities that allowed this hacking, and to the number of days that the vendor has had to fix them. Vendors who discover the vulnerability may create patches or advise workarounds to mitigate it, though users need to deploy that mitigation to eliminate the vulnerability in their systems. Zero-day attacks are severe threats. == Definition == Despite developers' goal of delivering a product that works entirely as intended, virtually all products contain software and hardware bugs. If a bug creates a security risk, it is called a vulnerability. Vulnerabilities vary in their ability to be exploited by malicious actors. Some are not usable at all, while others can be used to disrupt the device with a denial of service attack. The most dangerous allow the attacker to inject and run their own code, without the user being aware of it. Although the term "zero-day" initially referred to the time since the vendor had become aware of the vulnerability, zero-day vulnerabilities can also be defined as the subset of vulnerabilities for which no patch or other fix is available. A zero-day exploit is any exploit that takes advantage of such a vulnerability. == Exploits == An exploit is the delivery mechanism that takes advantage of the vulnerability to penetrate the target's systems, for such purposes as disrupting operations, installing malware, or exfiltrating data. Researchers Lillian Ablon and Andy Bogart write that "little is known about the true extent, use, benefit, and harm of zero-day exploits". Exploits based on zero-day vulnerabilities are considered more dangerous than those that take advantage of a known vulnerability. However, it is likely that most cyberattacks use known vulnerabilities, not zero-days. Governments of states are the primary users of zero-day exploits, not only because of the high cost of finding or buying vulnerabilities, but also the significant cost of writing the attack software. Nevertheless, anyone can use a vulnerability, and according to research by the RAND Corporation, "any serious attacker can always get an affordable zero-day for almost any target". Many targeted attacks and most advanced persistent threats rely on zero-day vulnerabilities. In 2017, the average time to develop an exploit from a zero-day vulnerability was estimated at 22 days. The difficulty of developing exploits has been increasing over time due to increased anti-exploitation features in popular software. === Window of vulnerability === Zero-day vulnerabilities are often classified as alive—meaning that there is no public knowledge of the vulnerability—and dead—the vulnerability has been disclosed, but not patched. If the software's maintainers are actively searching for vulnerabilities, it is a living vulnerability; such vulnerabilities in unmaintained software are called immortal. Zombie vulnerabilities can be exploited in older versions of the software but have been patched in newer versions. Even publicly known and zombie vulnerabilities are often exploitable for an extended period. Security patches can take months to develop, or may never be developed. A patch can have negative effects on the functionality of software and users may need to test the patch to confirm functionality and compatibility. Larger organizations may fail to identify and patch all dependencies, while smaller enterprises and personal users may not install patches. Research suggests that risk of cyberattack increases if the vulnerability is made publicly known or a patch is released. Cybercriminals can reverse engineer the patch to find the underlying vulnerability and develop exploits, often faster than users install the patch. According to research by RAND Corporation published in 2017, zero-day exploits remain usable for 6.9 years on average, although those purchased from a third party only remain usable for 1.4 years on average. The researchers were unable to determine if any particular platform or software (such as open-source software) had any relationship to the life expectancy of a zero-day vulnerability. Although the RAND researchers found that 5.7 percent of a stockpile of secret zero-day vulnerabilities will have been discovered by someone else within a year, another study found a higher overlap rate, as high as 10.8 percent to 21.9 percent per year. == Countermeasures == Because, by definition, there is no patch that can block a zero-day exploit, all systems employing the software or hardware with the vulnerability are at risk. This includes secure systems such as banks and governments that have all patches up to date. Security systems are designed around known vulnerabilities, and repeated exploitations of a zero-day exploit could continue undetected for an extended period of time. Although there have been many proposals for a system that is effective at detecting zero-day exploits, this remains an active area of research in 2023. Many organizations have adopted defense-in-depth tactics so that attacks are likely to require breaching multiple levels of security, which makes it more difficult to achieve. Conventional cybersecurity measures such as training and access control — including multi-factor authentication, least-privilege access, and air-gapping makes it harder to compromise systems with a zero-day exploit. Since writing perfectly secure software is impossible, some researchers argue that driving up the cost of exploits is considered a good strategy to reduce the burden of cyberattacks. == Market == Zero-day exploits can fetch millions of dollars. There are three main types of buyers: White: the vendor, or to third parties such as the Zero Day Initiative that disclose to the vendor. Often such disclosure is in exchange for a bug bounty. Not all companies respond positively to disclosures, as they can cause legal liability and operational overhead. It is not uncommon to receive cease-and-desist letters from software vendors after disclosing a vulnerability for free. Gray: the largest and most lucrative. Government or intelligence agencies buy zero-days and may use it in an attack, stockpile the vulnerability, or notify the vendor. The United States federal government is one of the largest buyers. As of 2013, the Five Eyes (United States, United Kingdom, Canada, Australia, and New Zealand) captured the plurality of the market and other significant purchasers included Russia, India, Brazil, Malaysia, Singapore, North Korea, and Iran. Middle Eastern countries were poised to become the biggest spenders. Black: organized crime, which typically prefers exploit software rather than just knowledge of a vulnerability. These users are more likely to employ "half-days" where a patch is already available. In 2015, the markets for government and crime were estimated at least ten times larger than the white market. Sellers are often hacker groups that seek out vulnerabilities in widely used software for financial reward. Some will only sell to certain buyers, while others will sell to anyone. White market sellers are more likely to be motivated by non pecuniary rewards such as recognition and intellectual challenge. Selling zero-day exploits is legal. Despite calls for more regulation, law professor Mailyn Fidler says there is little chance of an international agreement because key players such as Russia and Israel are not interested. The sellers and buyers that trade in zero-days tend to be secretive, relying on non-disclosure agreements and classified information laws to keep the exploits secret. If the vulnerability becomes known, it can be patched and its value consequently crashes. Because the market lacks transparency, it can be hard for parties to find a fair price. Sellers might not be paid if the vulnerability was disclosed before it was verified, or if the buyer declined to purchase it but used it anyway. With the proliferation of middlemen, sellers could never know to what use the exploits could be put. Buyers could not guarantee that the exploit was not sold to another party. Both buyers and sellers advertise on the dark web. Research published in 2022 based on maximum prices paid as quoted by a single exploit broker found a 44 percent annualized inflation rate in exploit pricing. Remote zero-click exploits could fetch the highest price, while those that require local access to the device are much cheaper. Vulnerabilities in widely used software are also more expensive. They estimated that around 400 to 1,500 people sold exploits to th

  Read more →
• 

  COVID-19 apps

  COVID-19 apps include mobile-software applications for digital contact-tracing—i.e. the process of identifying persons ("contacts") who may have been in contact with an infected individual—deployed during the COVID-19 pandemic. Numerous tracing applications have been developed or proposed, with official government support in some territories and jurisdictions. Several frameworks for building contact-tracing apps have been developed. Privacy concerns have been raised, especially about systems that are based on tracking the geographical location of app users. Less overtly intrusive alternatives include the co-option of Bluetooth signals to log a user's proximity to other cellphones. (Bluetooth technology has form in tracking cell-phones' locations.)) On 10 April 2020, Google and Apple jointly announced that they would integrate functionality to support such Bluetooth-based apps directly into their Android and iOS operating systems. India's COVID-19 tracking app Aarogya Setu became the world's fastest growing application—beating Pokémon Go—with 50 million users in the first 13 days of its release. == Rationale == Contact tracing is an important tool in infectious disease control, but as the number of cases rises time constraints make it more challenging to effectively control transmission. Digital contact tracing, especially if widely deployed, may be more effective than traditional methods of contact tracing. In a March 2020 model by the University of Oxford Big Data Institute's Christophe Fraser's team, a coronavirus outbreak in a city of one million people is halted if 80% of all smartphone users take part in a tracking system; in the model, the elderly are still expected to self-isolate en masse, but individuals who are neither symptomatic nor elderly are exempt from isolation unless they receive an alert that they are at risk of carrying the disease. Some proponents advocate for legislation exempting certain COVID-19 apps from general privacy restrictions. == Issues == === Uptake === Ross Anderson, professor of security engineering at Cambridge University, listed a number of potential practical problems with app-based systems, including false positives and the potential lack of effectiveness if takeup of the app is limited to only a small fraction of the population. In Singapore, only one person in three had downloaded the TraceTogether app by the end of June 2020, despite legal requirements for most workers; the app was also underused, as it required users to keep it open at all times on iOS. A team at the University of Oxford simulated the effect of a contact tracing app on a city of 1 million. They estimated that if the app was used in conjunction with the shielding of over-70s, then 56% of the population would have to be using the app for it to suppress the virus. This would be equivalent to 80% of smartphone users in the United Kingdom. They found that the app could still slow the spread of the virus if fewer people downloaded it, with one infection being prevented for every one or two users. In August 2020, the American Civil Liberties Union (ACLU) argued that there were disparities in smartphone use between demographics and minority groups, and that "even the most comprehensive, all-seeing contact tracing system is of little use without social and medical systems in place to help those who may have the virus — including access to medical care, testing, and support for those who are quarantined." === App store restrictions === Addressing concerns about the spread of misleading or harmful apps, Apple, Google and Amazon set limits on which types of organizations could add coronavirus-related apps to its App Store, limiting them to only "official" or otherwise reputable organizations. === Ethical principles of mass surveillance using COVID-19 contact tracing apps === The advent of COVID-19 contact tracing apps has led to concerns around privacy, the rights of app users, and governmental authority. The European Convention on Human Rights, the International Covenant on Civil and Political Rights (ICCPR) and the United Nations and the Siracusa Principles have outlined 4 principles to consider when looking at the ethical principles of mass surveillance with COVID-19 contact tracing apps. These are necessity, proportionality, scientific validity, and time boundedness. Necessity is defined as the idea that governments should only interfere with a person's rights when deemed essential for public health interests. The potential risks associated with infringements of personal privacy must be outweighed by the possibility of reducing significant harm to others. Potential benefits of contact-tracing apps that may be considered include allowing for blanket population-level quarantine measures to be lifted sooner and the minimization of people under quarantine. Hence, some contend that contact-tracing apps are justified as they may be less intrusive than blanket quarantine measures. Furthermore, the delay of an effective contact-tracing app with significant health and economic benefits may be considered unethical. Proportionality refers to the concept that a contact tracing app's potential negative impact on a person's rights should be justifiable by the severity of the health risks that are being addressed. Apps must use the most privacy-preserving options available to achieve their goals, and the selected option should not only be a logical option for achieving the goal but also an effective one. Scientific validity evaluates whether an app is effective, timely and accurate. Traditional manual contact-tracing procedures are not efficient enough for the COVID-19 pandemic, and do not consider asymptomatic transmission. Contact-tracing apps, on the other hand, can be effective COVID-19 contact-tracing tools that reduce R value to less than 1, leading to sustained epidemic suppression. However, for apps to be effective, there needs to be a minimum 56-60% uptake in the population. Apps should be continually modified to reflect current knowledge on the diseases being monitored. Some argue that contact-tracing apps should be considered societal experimental trials where results and adverse effects are evaluated according to the stringent guidelines of social experiments. Analyses should be conducted by independent research bodies and published for wide dissemination. Despite the current urgency of our pandemic situation, we should still adhere to the standard rigors of scientific evaluation. Time boundedness describe the need for establishing legal and technical sunset clauses so that they are only allowed to operate as long as necessary to address the pandemic situation. Apps should be withdrawn as soon as possible after the end of the pandemic. If the end of the pandemic cannot be predicted, the use of apps should be regularly reviewed and decisions about continued use should be made at each review. Collected data should only be retained by public health authorities for research purposes with clear stipulations on how long the data will be held for and who will be responsible for security, oversight, and ownership. === Privacy, discrimination and marginalisation concerns === The American Civil Liberties Union (ACLU) has published a set of principles for technology-assisted contact tracing and Amnesty International and over 100 other organizations issued a statement calling for limits on this kind of surveillance. The organisations declared eight conditions on governmental projects: surveillance would have to be "lawful, necessary and proportionate"; extensions of monitoring and surveillance would have to have sunset clauses; the use of data would have to be limited to COVID-19 purposes; data security and anonymity would have to be protected and shown to be protected based on evidence; digital surveillance would have to address the risk of exacerbating discrimination and marginalisation; any sharing of data with third parties would have to be defined in law; there would have to be safeguards against abuse and the rights of citizens to respond to abuses; "meaningful participation" by all "relevant stakeholders" would be required, including that of public health experts and marginalised groups. The German Chaos Computer Club (CCC) and Reporters Without Borders also issued checklists. The Exposure Notification service intends to address the problem of persistent surveillance by removing the tracing mechanism from their device operating systems once it is no longer needed. On 20 April 2020, it was reported that over 300 academics had signed a statement favouring decentralised proximity tracing applications over centralised models, given the difficulty in precluding centralised options being used "to enable unwarranted discrimination and surveillance." In a centralised model, a central database records the ID codes of meetings between users. In a decentralised model, this information is recorded on individual phones, with the role of the central

  Read more →
• 

  Capture the flag (cybersecurity)

  In computer security, Capture the Flag (CTF) is an exercise in which participants attempt to find text strings, called "flags", which are secretly hidden in purposefully vulnerable programs or websites. They can be used for both competitive or educational purposes. In two main variations of CTFs, participants either steal flags from other participants (attack/defense-style CTFs) or from organizers (jeopardy-style challenges). A mixed competition combines these two styles. Competitions can include hiding flags in hardware devices, they can be both online or in-person, and can be advanced or entry-level. The game is inspired by the traditional outdoor sport with the same name. CTFs are used as a tool for developing and refining cybersecurity skills, making them popular in both professional and academic settings. == Overview == Capture the Flag (CTF) is a cybersecurity competition that is used to test and develop computer security skills. It was first developed in 1996 at DEF CON, the largest cybersecurity conference in the United States which is hosted annually in Las Vegas, Nevada. The conference hosts a weekend of cybersecurity competitions, including their flagship CTF. Two popular CTF formats are jeopardy and attack-defense. Both formats test participant’s knowledge in cybersecurity, but differ in objective. In the Jeopardy format, participating teams must complete as many challenges of varying point values from a various categories such as cryptography, web exploitation, and reverse engineering. In the attack-defense format, competing teams must defend their vulnerable computer systems while attacking their opponent's systems. The exercise involves a diverse array of tasks, including exploitation and cracking passwords, but there is little evidence showing how these tasks translate into cybersecurity knowledge held by security experts. Recent research has shown that the Capture the Flag tasks mainly covered technical knowledge but lacked social topics like social engineering and awareness on cybersecurity. == Educational applications == CTFs have been shown to be an effective way to improve cybersecurity education through gamification. There are many examples of CTFs designed to teach cybersecurity skills to a wide variety of audiences, including PicoCTF, organized by the Carnegie Mellon CyLab, which is oriented towards high school students, and Arizona State University supported pwn.college. Beyond educational CTF events and resources, CTFs has been shown to be a highly effective way to instill cybersecurity concepts in the classroom. CTFs have been included in undergraduate computer science classes such as Introduction to Information Security at the National University of Singapore. CTFs are also popular in military academies. They are often included as part of the curriculum for cybersecurity courses, with the NSA organized Cyber Exercise culminating in a CTF competition between the US service academies and military colleges. == Competitions == Many CTF organizers register their competition with the CTFtime platform. This allows the tracking of the position of teams over time and across competitions. These include "Plaid Parliament of Pwning", "More Smoked Leet Chicken", "Dragon Sector", "dcua", "Eat, Sleep, Pwn, Repeat", "perfect blue", "organizers" and "Blue Water". Overall the "Plaid Parliament of Pwning" and "Dragon Sector" have both placed first worldwide the most with three times each. === Community competitions === Every year there are dozens of CTFs organized in a variety of formats. Many CTFs are associated with cybersecurity conferences such as DEF CON, various editions of SANS Institute's NetWars, HITCON, and BSides. The DEF CON CTF, an attack-defence CTF, is notable for being one of the oldest CTF competitions to exist, and has been variously referred to as the "World Series", "Superbowl", and "Olympics", of hacking by media outlets. The NYU Tandon hosted Cybersecurity Awareness Worldwide (CSAW) CTF is one of the largest open-entry competitions for students learning cybersecurity from around the world. In 2021, it hosted over 1200 teams during the qualification round. In addition to conference organized CTFs, many CTF clubs and teams organize CTF competitions. Many CTF clubs and teams are associated with universities, such as the CMU associated Plaid Parliament of Pwning, which hosts PlaidCTF, and the ASU associated Shellphish. Some community CTFs are online and open to all participants. The SANS Institute Holiday Hack Challenge and TryHackMe Advent of Cyber. === Government-supported competitions === Governmentally supported CTF competitions include the DARPA Cyber Grand Challenge and ENISA European Cybersecurity Challenge. In 2023, the US Space Force-sponsored Hack-a-Sat CTF competition included, for the first time, a live orbital satellite for participants to exploit. === Corporate-supported competitions === Corporations and other organizations sometimes use CTFs as a training or evaluation exercise, with benefits similar to those in educational settings. In addition to internal CTF exercises, some corporations such as Google and Tencent host publicly accessible CTF competitions. == In popular culture == In Mr. Robot, a qualification round for the DEF CON CTF competition is depicted in the season 3 opener "eps3.0_power-saver-mode.h". The logo for DEF CON can be seen in the background. In The Undeclared War, a CTF is depicted in the opening scene of the series as a recruitment exercise used by GCHQ. Go Go Squid!, a Chinese television series, is based around training for and competing in highly stylized CTF competitions .

  Read more →
• 

  Nobody (username)

  In many Unix variants, "nobody" is the conventional name of a user identifier which owns no files, is in no privileged groups, and has no abilities except those which every other user has. It is normally not enabled as a user account, i.e. has no home directory or login credentials assigned. Some systems also define an equivalent group "nogroup". == Uses == The pseudo-user "nobody" and group "nogroup" are used, for example, in the NFSv4 implementation of Linux by idmapd, if a user or group name in an incoming packet does not match any known username on the system. It was once common to run daemons as nobody, especially on servers, in order to limit the damage that could be done by a malicious user who gained control of them. However, the usefulness of this technique is reduced if more than one daemon is run like this, because then gaining control of one daemon would provide control of them all. The reason is that processes owned by the same user have the ability to send signals to each other and use debugging facilities to read or even modify each other's memory. Modern practice, as recommended by the Linux Standard Base, is to create a separate user account for each daemon.

  Read more →
• 

  Multi-exposure HDR capture

  In photography and videography, multi-exposure HDR capture is a technique that creates high dynamic range (HDR) images (or extended dynamic range images) by taking and combining multiple exposures of the same subject matter at different exposures. Combining multiple images in this way results in an image with a greater dynamic range than what would be possible by taking one single image. The technique can also be used to capture video by taking and combining multiple exposures for each frame of the video. The term "HDR" is used frequently to refer to the process of creating HDR images from multiple exposures. Many smartphones have an automated HDR feature that relies on computational imaging techniques to capture and combine multiple exposures. A single image captured by a camera provides a finite range of luminosity inherent to the medium, whether it is a digital sensor or film. Outside this range, tonal information is lost and no features are visible; tones that exceed the range are "burned out" and appear pure white in the brighter areas, while tones that fall below the range are "crushed" and appear pure black in the darker areas. The ratio between the maximum and the minimum tonal values that can be captured in a single image is known as the dynamic range. In photography, dynamic range is measured in exposure value (EV) differences, also known as stops. The human eye's response to light is non-linear: halving the light level does not halve the perceived brightness of a space, it makes it look only slightly dimmer. For most illumination levels, the response is approximately logarithmic. Human eyes adapt fairly rapidly to changes in light levels. HDR can thus produce images that look more like what a human sees when looking at the subject. This technique can be applied to produce images that preserve local contrast for a natural rendering, or exaggerate local contrast for artistic effect. HDR is useful for recording many real-world scenes containing a wider range of brightness than can be captured directly, typically both bright, direct sunlight and deep shadows. Due to the limitations of printing and display contrast, the extended dynamic range of HDR images must be compressed to the range that can be displayed. The method of rendering a high dynamic range image to a standard monitor or printing device is called tone mapping; it reduces the overall contrast of an HDR image to permit display on devices or prints with lower dynamic range. == Benefits == One aim of HDR is to present a similar range of luminance to that experienced through the human visual system. The human eye, through non-linear response, adaptation of the iris, and other methods, adjusts constantly to a broad range of luminance present in the environment. The brain continuously interprets this information so that a viewer can see in a wide range of light conditions. Most cameras are limited to a much narrower range of exposure values within a single image, due to the dynamic range of the capturing medium. With a limited dynamic range, tonal differences can be captured only within a certain range of brightness. Outside of this range, no details can be distinguished: when the tone being captured exceeds the range in bright areas, these tones appear as pure white, and when the tone being captured does not meet the minimum threshold, these tones appear as pure black. Images captured with non-HDR cameras that have a limited exposure range (low dynamic range, LDR), may lose detail in highlights or shadows. Modern CMOS image sensors have improved dynamic range and can often capture a wider range of tones in a single exposure reducing the need to perform multi-exposure HDR. Color film negatives and slides consist of multiple film layers that respond to light differently. Original film (especially negatives versus transparencies or slides) feature a very high dynamic range (in the order of 8 for negatives and 4 to 4.5 for positive transparencies). Multi-exposure HDR is used in photography and also in extreme dynamic range applications such as welding or automotive work. In security cameras the term "wide dynamic range" is used instead of HDR. === Limitations === A fast-moving subject, or camera movement between the multiple exposures, will generate a "ghost" effect or a staggered-blur strobe effect due to the merged images not being identical. Unless the subject is static and the camera mounted on a tripod there may be a tradeoff between extended dynamic range and sharpness. Sudden changes in the lighting conditions (strobed LED light) can also interfere with the desired results, by producing one or more HDR layers that do have the luminosity expected by an automated HDR system, though one might still be able to produce a reasonable HDR image manually in software by rearranging the image layers to merge in order of their actual luminosity. Because of the nonlinearity of some sensors image artifacts can be common. Camera characteristics such as gamma curves, sensor resolution, noise, photometric calibration and color calibration affect resulting high-dynamic-range images. == Process == High-dynamic-range photographs are generally composites of multiple standard dynamic range images, often captured using exposure bracketing. Afterwards, photo manipulation software merges the input files into a single HDR image, which is then also tone mapped in accordance with the limitations of the planned output or display. === Capturing multiple images (exposure bracketing) === Any camera that allows manual exposure control can perform multi-exposure HDR image capture, although one equipped with automatic exposure bracketing (AEB) facilitates the process. Some cameras have an AEB feature that spans a far greater dynamic range than others, from ±0.6 in simpler cameras to ±18 EV in top professional cameras, as of 2020. The exposure value (EV) refers to the amount of light applied to the light-sensitive detector, whether film or digital sensor such as a CCD. An increase or decrease of one stop is defined as a doubling or halving of the amount of light captured. Revealing detail in the darkest of shadows requires an increased EV, while preserving detail in very bright situations requires very low EVs. EV is controlled using one of two photographic controls: varying either the size of the aperture or the exposure time. A set of images with multiple EVs intended for HDR processing should be captured only by altering the exposure time; altering the aperture size also would affect the depth of field and so the resultant multiple images would be quite different, preventing their final combination into a single HDR image. Multi-exposure HDR photography generally is limited to still scenes because any movement between successive images will impede or prevent success in combining them afterward. Also, because the photographer must capture three or more images to obtain the desired luminance range, taking such a full set of images takes extra time. Photographers have developed calculation methods and techniques to partially overcome these problems, but the use of a sturdy tripod is advised to minimize framing differences between exposures. === Merging the images into an HDR image === Tonal information and details from shadow areas can be recovered from images that are deliberately overexposed (i.e., with positive EV compared to the correct scene exposure), while similar tonal information from highlight areas can be recovered from images that are deliberately underexposed (negative EV). The process of selecting and extracting shadow and highlight information from these over/underexposed images and then combining them with image(s) that are exposed correctly for the overall scene is known as exposure fusion. Exposure fusion can be performed manually, relying on the HDR operator's judgment, experience, and training, but usually, fusion is performed automatically by software. === Storing === Information stored in high-dynamic-range images typically corresponds to the physical values of luminance or radiance that can be observed in the real world. This is different from traditional digital images, which represent colors as they should appear on a monitor or a paper print. Therefore, HDR image formats are often called scene-referred, in contrast to traditional digital images, which are device-referred or output-referred. Furthermore, traditional images are usually encoded for the human visual system (maximizing the visual information stored in the fixed number of bits), which is usually called gamma encoding or gamma correction. The values stored for HDR images are often gamma compressed using mathematical functions such as power laws logarithms, or floating point linear values, since fixed-point linear encodings are increasingly inefficient over higher dynamic ranges. HDR images often do not use fixed ranges per color channel, other than traditional images, to represent many more colors over a much wi

  Read more →
• 

  Image subtraction

  Image subtraction or pixel subtraction or difference imaging is an image processing technique whereby the digital numeric value of one pixel or whole image is subtracted from another image, and a new image generated from the result. This is primarily done for one of two reasons – levelling uneven sections of an image such as half an image having a shadow on it, or detecting changes between two images. This method can show things in the image that have changed position, brightness, color, or shape. For this technique to work, the two images must first be spatially aligned to match features between them, and their photometric values and point spread functions must be made compatible, either by careful calibration, or by post-processing (using color mapping). The complexity of the pre-processing needed before differencing varies with the type of image, but is essential to ensure good subtraction of static features. This is commonly used in fields such as time-domain astronomy (known primarily as difference imaging) to find objects that fluctuate in brightness or move. In automated searches for asteroids or Kuiper belt objects, the target moves and will be in one place in one image, and in another place in a reference image made an hour or day later. Thus, image processing algorithms can make the fixed stars in the background disappear, leaving only the target. Distinct families of astronomical image subtraction techniques have emerged, operating in both image space or frequency space, with distinct trade-offs in both quality of subtraction and computational cost. These algorithms lie at the heart of almost all modern (and upcoming) transient surveys, and can enable the detection of even faint supernovae embedded in bright galaxies. Nevertheless, in astronomical imaging, significant 'residuals' remain around bright, complex sources, necessitating further algorithmic steps to identify candidates (known as real-bogus classification) The Hutchinson metric can be used to "measure of the discrepancy between two images for use in fractal image processing".

  Read more →
• 

  Anthem medical data breach

  The Anthem medical data breach was a medical data breach of information held by Elevance Health, known at that time as Anthem Inc. On February 4, 2015, Anthem, Inc. disclosed that criminal hackers had broken into its servers and had potentially stolen over 37.5 million records that contain personally identifiable information from its servers. On February 24, 2015 Anthem raised the number to 78.8 million people whose personal information had been affected. According to Anthem, Inc., the data breach extended into multiple brands Anthem, Inc. uses to market its healthcare plans, including, Anthem Blue Cross, Anthem Blue Cross and Blue Shield, Blue Cross and Blue Shield of Georgia, Empire Blue Cross and Blue Shield, Amerigroup, Caremore, and UniCare. Healthlink says that it was also a victim. Anthem says users' medical information and financial data were not compromised. Anthem has offered free credit monitoring in the wake of the breach. Michael Daniel, chief adviser on cybersecurity for President Barack Obama, said he would be changing his own password. According to The New York Times, about 80 million company records were hacked, and there is a fear that the stolen data will be used for identity theft. The compromised information contained names, birthdays, medical IDs, social security numbers, street addresses, e-mail addresses and employment information, including income data. == Theft of the data == The data was stolen over a period of weeks the month before the data breach was discovered. Because no medical information was compromised, Anthem was not required by law to encrypt the data. However, Anthem faced several civil class-action lawsuits, which were settled in 2017 at a cost of $115 million. Anthem did not admit any wrongdoing in the settlement. Data from the attack is expected to be sold on the black market. == Impact == Persons whose data was stolen could have resulting problems about identity theft for the rest of their lives. Anthem had a US$100 million insurance policy for cyber problems from American International Group. One report suggested that all of this money could be consumed by the process of notifying customers of the breach. == Responses == Anthem hired Mandiant, a cybersecurity firm, to review their security systems and advised people whose data was stolen to monitor their accounts and remain vigilant. The theft of the data raised fears generally about the theft of medical information. A writer from Harvard Law School suggested that this data breach might spark reform of security practices and government data safety regulation. An investigation conducted by several state insurance commissioners blames the breach on an attacker whose identity was withheld, and claims that the breach was likely ordered by a foreign government whose name was withheld. It also concluded that Anthem had taken reasonable measures to protect its data before the breach and that its remediation plan was effective at shutting down the breach once it was discovered. It also marks the starting date of the breach as February 18, 2014. The lead investigator was the Indiana Department of Insurance (DOI) -- Anthem's principal regulator, because Anthem is headquartered in Indiana. The Indiana DOI hired independent auditors to conduct a security assessment at Anthem, which concluded, "While deficiencies within Anthem’s cybersecurity posture were noted by the Examination Team, these deficiencies were not, in our experience, uncommon to companies comparable to Anthem in size and scope. While the pre-breach deficiencies impacted Anthem’s ability to reduce the likelihood of and quickly detect the Data Breach, the controls implemented subsequent to the Data Breach should improve Anthem’s ability to detect future breaches and enable Anthem to respond more effectively to a future attack than was the case in this instance." Federal regulators also conducted an investigation of the Anthem data breach, resulting in a $16 million settlement between Anthem and the Department of Health and Human Services (HHS) -- by far the largest HHS data breach settlement. An HHS Director overseeing the investigation said, "The largest health data breach in U.S. history fully merits the largest HIPAA settlement in history. Unfortunately, Anthem failed to implement appropriate measures for detecting hackers who had gained access to their system to harvest passwords and steal people's private information." The HHS settlement also required Anthem to perform a risk assessment and correct any identified deficiencies in its cybersecurity, with HHS oversight of Anthem's progress. Approximately 100 private class action lawsuits were filed against Anthem over the data breach and consolidated in California federal court, in front of Judge Koh, a respected authority in data breach litigation. After contested briefing over who should lead the litigation efforts, Judge Koh appoints Eve Cervantez of Altshuler Berzon and Andy Friedman of Cohen Milstein as co-lead counsel, and appointed Eric Gibbs of Gibbs Law Group and Michael Sobel of Lieff Cabraser to head a Plaintiffs' Steering Committee. In 2017, Anthem agreed to settle the litigation for $115 million, the largest ever data breach settlement at the time. The attorneys requested $38 million in fees for their work on the case, but Judge Koh slashed the fee request, finding that only $31 million in fees were merited.

  Read more →
• 

  Zero-day vulnerability

  A zero-day (also known as a 0-day) is a vulnerability or security hole in a computer system unknown to its developers or anyone capable of mitigating it. Until the vulnerability is remedied, threat actors can exploit it in a zero-day exploit, or zero-day attack. The term "zero-day" originally referred to the number of days since a new piece of software was released to the public, so "zero-day software" was obtained by hacking into a developer's computer before release. Eventually the term was applied to the vulnerabilities that allowed this hacking, and to the number of days that the vendor has had to fix them. Vendors who discover the vulnerability may create patches or advise workarounds to mitigate it, though users need to deploy that mitigation to eliminate the vulnerability in their systems. Zero-day attacks are severe threats. == Definition == Despite developers' goal of delivering a product that works entirely as intended, virtually all products contain software and hardware bugs. If a bug creates a security risk, it is called a vulnerability. Vulnerabilities vary in their ability to be exploited by malicious actors. Some are not usable at all, while others can be used to disrupt the device with a denial of service attack. The most dangerous allow the attacker to inject and run their own code, without the user being aware of it. Although the term "zero-day" initially referred to the time since the vendor had become aware of the vulnerability, zero-day vulnerabilities can also be defined as the subset of vulnerabilities for which no patch or other fix is available. A zero-day exploit is any exploit that takes advantage of such a vulnerability. == Exploits == An exploit is the delivery mechanism that takes advantage of the vulnerability to penetrate the target's systems, for such purposes as disrupting operations, installing malware, or exfiltrating data. Researchers Lillian Ablon and Andy Bogart write that "little is known about the true extent, use, benefit, and harm of zero-day exploits". Exploits based on zero-day vulnerabilities are considered more dangerous than those that take advantage of a known vulnerability. However, it is likely that most cyberattacks use known vulnerabilities, not zero-days. Governments of states are the primary users of zero-day exploits, not only because of the high cost of finding or buying vulnerabilities, but also the significant cost of writing the attack software. Nevertheless, anyone can use a vulnerability, and according to research by the RAND Corporation, "any serious attacker can always get an affordable zero-day for almost any target". Many targeted attacks and most advanced persistent threats rely on zero-day vulnerabilities. In 2017, the average time to develop an exploit from a zero-day vulnerability was estimated at 22 days. The difficulty of developing exploits has been increasing over time due to increased anti-exploitation features in popular software. === Window of vulnerability === Zero-day vulnerabilities are often classified as alive—meaning that there is no public knowledge of the vulnerability—and dead—the vulnerability has been disclosed, but not patched. If the software's maintainers are actively searching for vulnerabilities, it is a living vulnerability; such vulnerabilities in unmaintained software are called immortal. Zombie vulnerabilities can be exploited in older versions of the software but have been patched in newer versions. Even publicly known and zombie vulnerabilities are often exploitable for an extended period. Security patches can take months to develop, or may never be developed. A patch can have negative effects on the functionality of software and users may need to test the patch to confirm functionality and compatibility. Larger organizations may fail to identify and patch all dependencies, while smaller enterprises and personal users may not install patches. Research suggests that risk of cyberattack increases if the vulnerability is made publicly known or a patch is released. Cybercriminals can reverse engineer the patch to find the underlying vulnerability and develop exploits, often faster than users install the patch. According to research by RAND Corporation published in 2017, zero-day exploits remain usable for 6.9 years on average, although those purchased from a third party only remain usable for 1.4 years on average. The researchers were unable to determine if any particular platform or software (such as open-source software) had any relationship to the life expectancy of a zero-day vulnerability. Although the RAND researchers found that 5.7 percent of a stockpile of secret zero-day vulnerabilities will have been discovered by someone else within a year, another study found a higher overlap rate, as high as 10.8 percent to 21.9 percent per year. == Countermeasures == Because, by definition, there is no patch that can block a zero-day exploit, all systems employing the software or hardware with the vulnerability are at risk. This includes secure systems such as banks and governments that have all patches up to date. Security systems are designed around known vulnerabilities, and repeated exploitations of a zero-day exploit could continue undetected for an extended period of time. Although there have been many proposals for a system that is effective at detecting zero-day exploits, this remains an active area of research in 2023. Many organizations have adopted defense-in-depth tactics so that attacks are likely to require breaching multiple levels of security, which makes it more difficult to achieve. Conventional cybersecurity measures such as training and access control — including multi-factor authentication, least-privilege access, and air-gapping makes it harder to compromise systems with a zero-day exploit. Since writing perfectly secure software is impossible, some researchers argue that driving up the cost of exploits is considered a good strategy to reduce the burden of cyberattacks. == Market == Zero-day exploits can fetch millions of dollars. There are three main types of buyers: White: the vendor, or to third parties such as the Zero Day Initiative that disclose to the vendor. Often such disclosure is in exchange for a bug bounty. Not all companies respond positively to disclosures, as they can cause legal liability and operational overhead. It is not uncommon to receive cease-and-desist letters from software vendors after disclosing a vulnerability for free. Gray: the largest and most lucrative. Government or intelligence agencies buy zero-days and may use it in an attack, stockpile the vulnerability, or notify the vendor. The United States federal government is one of the largest buyers. As of 2013, the Five Eyes (United States, United Kingdom, Canada, Australia, and New Zealand) captured the plurality of the market and other significant purchasers included Russia, India, Brazil, Malaysia, Singapore, North Korea, and Iran. Middle Eastern countries were poised to become the biggest spenders. Black: organized crime, which typically prefers exploit software rather than just knowledge of a vulnerability. These users are more likely to employ "half-days" where a patch is already available. In 2015, the markets for government and crime were estimated at least ten times larger than the white market. Sellers are often hacker groups that seek out vulnerabilities in widely used software for financial reward. Some will only sell to certain buyers, while others will sell to anyone. White market sellers are more likely to be motivated by non pecuniary rewards such as recognition and intellectual challenge. Selling zero-day exploits is legal. Despite calls for more regulation, law professor Mailyn Fidler says there is little chance of an international agreement because key players such as Russia and Israel are not interested. The sellers and buyers that trade in zero-days tend to be secretive, relying on non-disclosure agreements and classified information laws to keep the exploits secret. If the vulnerability becomes known, it can be patched and its value consequently crashes. Because the market lacks transparency, it can be hard for parties to find a fair price. Sellers might not be paid if the vulnerability was disclosed before it was verified, or if the buyer declined to purchase it but used it anyway. With the proliferation of middlemen, sellers could never know to what use the exploits could be put. Buyers could not guarantee that the exploit was not sold to another party. Both buyers and sellers advertise on the dark web. Research published in 2022 based on maximum prices paid as quoted by a single exploit broker found a 44 percent annualized inflation rate in exploit pricing. Remote zero-click exploits could fetch the highest price, while those that require local access to the device are much cheaper. Vulnerabilities in widely used software are also more expensive. They estimated that around 400 to 1,500 people sold exploits to th

  Read more →
• 

  Multi-model database

  In the field of database design, a multi-model database is a database management system designed to support multiple data models against a single, integrated backend. In contrast, most database management systems are organized around a single data model that determines how data can be organized, stored, and manipulated. Document, graph, relational, and key–value models are examples of data models that may be supported by a multi-model database. == Background == The relational data model became popular after its publication by Edgar F. Codd in 1970. Due to increasing requirements for horizontal scalability and fault tolerance, NoSQL databases became prominent after 2009. NoSQL databases use a variety of data models, with document, graph, and key–value models being popular. A multi-model database is a database that can store, index and query data in more than one model. For some time, databases have primarily supported only one model, such as: relational database, document-oriented database, graph database or triplestore. A database that combines many of these is multi-model. This should not be confused with multimodal database systems such as Pixeltable or ApertureDB, which focus on unified management of different media types (images, video, audio, text) rather than different data models. For some time, it was all but forgotten (or considered irrelevant) that there were any other database models besides relational. The relational model and notion of third normal form were the default standard for all data storage. However, prior to the dominance of relational data modeling, from about 1980 to 2005, the hierarchical database model was commonly used. Since 2000 or 2010, many NoSQL models that are non-relational, including documents, triples, key–value stores and graphs are popular. Arguably, geospatial data, temporal data, and text data are also separate models, though indexed, queryable text data is generally termed a "search engine" rather than a database. The first time the word "multi-model" has been associated to the databases was on May 30, 2012 in Cologne, Germany, during the Luca Garulli's key note "NoSQL Adoption – What’s the Next Step?". Luca Garulli envisioned the evolution of the 1st generation NoSQL products into new products with more features able to be used by multiple use cases. The idea of multi-model databases can be traced back to Object–Relational Data Management Systems (ORDBMS) in the early 1990s and in a more broader scope even to federated and integrated DBMSs in the early 1980s. An ORDBMS system manages different types of data such as relational, object, text and spatial by plugging domain specific data types, functions and index implementations into the DBMS kernels. A multi-model database is most directly a response to the "polyglot persistence" approach of knitting together multiple database products, each handing a different model, to achieve a multi-model capability as described by Martin Fowler. This strategy has two major disadvantages: it leads to a significant increase in operational complexity, and there is no support for maintaining data consistency across the separate data stores, so multi-model databases have begun to fill in this gap. Multi-model databases are intended to offer the data modeling advantages of polyglot persistence, without its disadvantages. Operational complexity, in particular, is reduced through the use of a single data store. == Benchmarking multi-model databases == As more and more platforms are proposed to deal with multi-model data, there are a few works on benchmarking multi-model databases. For instance, Pluciennik, Oliveira, and UniBench reviewed existing multi-model databases and made an evaluation effort towards comparing multi-model databases and other SQL and NoSQL databases respectively. They pointed out that the advantages of multi-model databases over single-model databases are as follows : == Architecture == The main difference between the available multi-model databases is related to their architectures. Multi-model databases can support different models either within the engine or via different layers on top of the engine. Some products may provide an engine which supports documents and graphs while others provide layers on top of a key-key store. With a layered architecture, each data model is provided via its own component. == User-defined data models == In addition to offering multiple data models in a single data store, some databases allow developers to easily define custom data models. This capability is enabled by ACID transactions with high performance and scalability. In order for a custom data model to support concurrent updates, the database must be able to synchronize updates across multiple keys. ACID transactions, if they are sufficiently performant, allow such synchronization. JSON documents, graphs, and relational tables can all be implemented in a manner that inherits the horizontal scalability and fault-tolerance of the underlying data store. == Theoretical Foundation for Multi-Model Databases == The traditional theory of relations is not enough to accurately describe multi-model database systems. Recent research is focused on developing a new theoretical foundation for these systems. Category theory can provide a unified, rigorous language for modeling, integrating, and transforming different data models. By representing multi-model data as sets and their relationships as functions or relations within the Set category, we can create a formal framework to describe, manipulate, and understand various data models and how they interact.

  Read more →
• 

  Matrix regularization

  In the field of statistical learning theory, matrix regularization generalizes notions of vector regularization to cases where the object to be learned is a matrix. The purpose of regularization is to enforce conditions, for example sparsity or smoothness, that can produce stable predictive functions. For example, in the more common vector framework, Tikhonov regularization optimizes over min x ‖ A x − y ‖ 2 + λ ‖ x ‖ 2 {\displaystyle \min _{x}\left\|Ax-y\right\|^{2}+\lambda \left\|x\right\|^{2}} to find a vector x {\displaystyle x} that is a stable solution to the regression problem. When the system is described by a matrix rather than a vector, this problem can be written as min X ‖ A X − Y ‖ 2 + λ ‖ X ‖ 2 , {\displaystyle \min _{X}\left\|AX-Y\right\|^{2}+\lambda \left\|X\right\|^{2},} where the vector norm enforcing a regularization penalty on x {\displaystyle x} has been extended to a matrix norm on X {\displaystyle X} . Matrix regularization has applications in matrix completion, multivariate regression, and multi-task learning. Ideas of feature and group selection can also be extended to matrices, and these can be generalized to the nonparametric case of multiple kernel learning. == Basic definition == Consider a matrix W {\displaystyle W} to be learned from a set of examples, S = ( X i t , y i t ) {\displaystyle S=(X_{i}^{t},y_{i}^{t})} , where i {\displaystyle i} goes from 1 {\displaystyle 1} to n {\displaystyle n} , and t {\displaystyle t} goes from 1 {\displaystyle 1} to T {\displaystyle T} . Let each input matrix X i {\displaystyle X_{i}} be ∈ R D T {\displaystyle \in \mathbb {R} ^{DT}} , and let W {\displaystyle W} be of size D × T {\displaystyle D\times T} . A general model for the output y {\displaystyle y} can be posed as y i t = ⟨ W , X i t ⟩ F , {\displaystyle y_{i}^{t}=\left\langle W,X_{i}^{t}\right\rangle _{F},} where the inner product is the Frobenius inner product. For different applications the matrices X i {\displaystyle X_{i}} will have different forms, but for each of these the optimization problem to infer W {\displaystyle W} can be written as min W ∈ H E ( W ) + R ( W ) , {\displaystyle \min _{W\in {\mathcal {H}}}E(W)+R(W),} where E {\displaystyle E} defines the empirical error for a given W {\displaystyle W} , and R ( W ) {\displaystyle R(W)} is a matrix regularization penalty. The function R ( W ) {\displaystyle R(W)} is typically chosen to be convex and is often selected to enforce sparsity (using ℓ 1 {\displaystyle \ell ^{1}} -norms) and/or smoothness (using ℓ 2 {\displaystyle \ell ^{2}} -norms). Finally, W {\displaystyle W} is in the space of matrices H {\displaystyle {\mathcal {H}}} with Frobenius inner product ⟨ … ⟩ F {\displaystyle \langle \dots \rangle _{F}} . == General applications == === Matrix completion === In the problem of matrix completion, the matrix X i t {\displaystyle X_{i}^{t}} takes the form X i t = e t ⊗ e i ′ , {\displaystyle X_{i}^{t}=e_{t}\otimes e_{i}',} where ( e t ) t {\displaystyle (e_{t})_{t}} and ( e i ′ ) i {\displaystyle (e_{i}')_{i}} are the canonical basis in R T {\displaystyle \mathbb {R} ^{T}} and R D {\displaystyle \mathbb {R} ^{D}} . In this case the role of the Frobenius inner product is to select individual elements w i t {\displaystyle w_{i}^{t}} from the matrix W {\displaystyle W} . Thus, the output y {\displaystyle y} is a sampling of entries from the matrix W {\displaystyle W} . The problem of reconstructing W {\displaystyle W} from a small set of sampled entries is possible only under certain restrictions on the matrix, and these restrictions can be enforced by a regularization function. For example, it might be assumed that W {\displaystyle W} is low-rank, in which case the regularization penalty can take the form of a nuclear norm. R ( W ) = λ ‖ W ‖ ∗ = λ ∑ i | σ i | , {\displaystyle R(W)=\lambda \left\|W\right\|_{}=\lambda \sum _{i}\left|\sigma _{i}\right|,} where σ i {\displaystyle \sigma _{i}} , with i {\displaystyle i} from 1 {\displaystyle 1} to min D , T {\displaystyle \min D,T} , are the singular values of W {\displaystyle W} . === Multivariate regression === Models used in multivariate regression are parameterized by a matrix of coefficients. In the Frobenius inner product above, each matrix X {\displaystyle X} is X i t = e t ⊗ x i {\displaystyle X_{i}^{t}=e_{t}\otimes x_{i}} such that the output of the inner product is the dot product of one row of the input with one column of the coefficient matrix. The familiar form of such models is Y = X W + b {\displaystyle Y=XW+b} Many of the vector norms used in single variable regression can be extended to the multivariate case. One example is the squared Frobenius norm, which can be viewed as an ℓ 2 {\displaystyle \ell ^{2}} -norm acting either entrywise, or on the singular values of the matrix: R ( W ) = λ ‖ W ‖ F 2 = λ ∑ i ∑ j | w i j | 2 = λ Tr ⁡ ( W ∗ W ) = λ ∑ i σ i 2 . {\displaystyle R(W)=\lambda \left\|W\right\|_{F}^{2}=\lambda \sum _{i}\sum _{j}\left|w_{ij}\right|^{2}=\lambda \operatorname {Tr} \left(W^{}W\right)=\lambda \sum _{i}\sigma _{i}^{2}.} In the multivariate case the effect of regularizing with the Frobenius norm is the same as the vector case; very complex models will have larger norms, and, thus, will be penalized more. === Multi-task learning === The setup for multi-task learning is almost the same as the setup for multivariate regression. The primary difference is that the input variables are also indexed by task (columns of Y {\displaystyle Y} ). The representation with the Frobenius inner product is then X i t = e t ⊗ x i t . {\displaystyle X_{i}^{t}=e_{t}\otimes x_{i}^{t}.} The role of matrix regularization in this setting can be the same as in multivariate regression, but matrix norms can also be used to couple learning problems across tasks. In particular, note that for the optimization problem min W ‖ X W − Y ‖ 2 2 + λ ‖ W ‖ 2 2 {\displaystyle \min _{W}\left\|XW-Y\right\|_{2}^{2}+\lambda \left\|W\right\|_{2}^{2}} the solutions corresponding to each column of Y {\displaystyle Y} are decoupled. That is, the same solution can be found by solving the joint problem, or by solving an isolated regression problem for each column. The problems can be coupled by adding an additional regularization penalty on the covariance of solutions min W , Ω ‖ X W − Y ‖ 2 2 + λ 1 ‖ W ‖ 2 2 + λ 2 Tr ⁡ ( W T Ω − 1 W ) {\displaystyle \min _{W,\Omega }\left\|XW-Y\right\|_{2}^{2}+\lambda _{1}\left\|W\right\|_{2}^{2}+\lambda _{2}\operatorname {Tr} \left(W^{T}\Omega ^{-1}W\right)} where Ω {\displaystyle \Omega } models the relationship between tasks. This scheme can be used to both enforce similarity of solutions across tasks, and to learn the specific structure of task similarity by alternating between optimizations of W {\displaystyle W} and Ω {\displaystyle \Omega } . When the relationship between tasks is known to lie on a graph, the Laplacian matrix of the graph can be used to couple the learning problems. == Spectral regularization == Regularization by spectral filtering has been used to find stable solutions to problems such as those discussed above by addressing ill-posed matrix inversions (see for example Filter function for Tikhonov regularization). In many cases the regularization function acts on the input (or kernel) to ensure a bounded inverse by eliminating small singular values, but it can also be useful to have spectral norms that act on the matrix that is to be learned. There are a number of matrix norms that act on the singular values of the matrix. Frequently used examples include the Schatten p-norms, with p = 1 or 2. For example, matrix regularization with a Schatten 1-norm, also called the nuclear norm, can be used to enforce sparsity in the spectrum of a matrix. This has been used in the context of matrix completion when the matrix in question is believed to have a restricted rank. In this case the optimization problem becomes: min ‖ W ‖ ∗ subject to W i , j = Y i j . {\displaystyle \min \left\|W\right\|_{}~~{\text{ subject to }}~~W_{i,j}=Y_{ij}.} Spectral Regularization is also used to enforce a reduced rank coefficient matrix in multivariate regression. In this setting, a reduced rank coefficient matrix can be found by keeping just the top n {\displaystyle n} singular values, but this can be extended to keep any reduced set of singular values and vectors. == Structured sparsity == Sparse optimization has become the focus of much research interest as a way to find solutions that depend on a small number of variables (see e.g. the Lasso method). In principle, entry-wise sparsity can be enforced by penalizing the entry-wise ℓ 0 {\displaystyle \ell ^{0}} -norm of the matrix, but the ℓ 0 {\displaystyle \ell ^{0}} -norm is not convex. In practice this can be implemented by convex relaxation to the ℓ 1 {\displaystyle \ell ^{1}} -norm. While entry-wise regularization with an ℓ 1 {\displaystyle \ell ^{1}} -norm will find solutions with a small number of nonzero elements, applying an ℓ 1 {

  Read more →
• 

  Starlight Information Visualization System

  Starlight is a software product originally developed at Pacific Northwest National Laboratory and now by Future Point Systems. It is an advanced visual analysis environment. In addition to using information visualization to show the importance of individual pieces of data by showing how they relate to one another, it also contains a small suite of tools useful for collaboration and data sharing, as well as data conversion, processing, augmentation and loading. The software, originally developed for the intelligence community, allows users to load data from XML files, databases, RSS feeds, web services, HTML files, Microsoft Word, PowerPoint, Excel, CSV, Adobe PDF, TXT files, etc. and analyze it with a variety of visualizations and tools. The system integrates structured, unstructured, geospatial, and multimedia data, offering comparisons of information at multiple levels of abstraction, simultaneously and in near real-time. In addition Starlight allows users to build their own named entity-extractors using a combination of algorithms, targeted normalization lists and regular expressions in the Starlight Data Engineer (SDE). As an example, Starlight might be used to look for correlations in a database containing records about chemical spills. An analyst could begin by grouping records according to the cause of the spill to reveal general trends. Sorting the data a second time, they could apply different colors based on related details such as the company responsible, age of equipment or geographic location. Maps and photographs could be integrated into the display, making it even easier to recognize connections among multiple variables. Starlight has been deployed to both the Iraq and Afghanistan wars and used on a number of large-scale projects. PNNL began developing Starlight in the mid-1990s, with funding from the Land Information Warfare Agency, a part of the Army Intelligence and Security Command and continued developed at the laboratory with funding from the NSA and the CIA. Starlight integrates visual representations of reports, radio transcripts, radar signals, maps and other information. The software system was recently honored with an R&D 100 Award for technical innovation. In 2006 Future Point Systems, a Silicon Valley startup, acquired rights to jointly develop and distribute the Starlight product in cooperation with the Pacific Northwest National Laboratory. The software is now also used outside of the military/intelligence communities in a number of commercial environments.

  Read more →
• 

  Ciscogate

  Ciscogate, also known as the Black Hat Bug, is the name given to a legal incident that occurred at the Black Hat Briefings security conference in Las Vegas, Nevada, on July 27, 2005. On the morning of the first day of the conference, July 26, 2005, some attendees noticed that 30 pages of text had been physically ripped out of the extensive conference presentation booklet the night before at the request of Cisco Systems and the CD-ROM with presentation slides was not included. It was determined the pages covered a talk to be given by Michael Lynn, a security researcher with Atlanta-based IBM Internet Security Systems (ISS). Instead of the pages with the details, attendees found a photographed copy of a notice from Black Hat saying "Due to some last minute changes beyond Black Hat's control, and at the request of the presenter, the included materials aren't up to the standards Black Hat tries to meet. Black Hat will be the first to apologize. We hope the vendors involved will follow suit." According to Lynn's lawyer, his employer had approved of the talk leading up to the conference but changed their minds two days before the scheduled talk, forbidding him from presenting. Lynn's original presentation was to cover a vulnerability in Cisco routers. The presentation was one of four scheduled to follow Jeff Moss' keynote address on the first day of the conference, titled "Cisco IOS Security Architecture". After being told by his employer that he could not present on the topic, Lynn chose an alternate topic. Cisco and ISS had offered to give new joint presentation but this was turned down by Black Hat because the original speaking slot was given to Lynn, not Cisco. Lynn's presentation began by covering security issues in services that allow users to make Voice over IP telephone calls. Shortly after beginning the presentation Lynn changed back to his original topic and began disclosing some technical details of the vulnerability he found in Cisco routers stating that he would rather resign from his job at ISS than keep the details private. == Lawsuit == Shortly after Lynn concluded his talk he met Jennifer Granick, who would soon become his lawyer. During their initial meeting Lynn told Granick that he expected to be sued. Later in the evening Lynn had heard that Cisco and ISS had filed a lawsuit and requested a temporary restraining order against Black Hat but not himself. A public relations representative from Black Hat told Granick that the lawsuit was against both Black Hat and Lynn and that the companies had scheduled an Ex parte hearing in San Francisco the next morning to request the restraining order. That night, Andrew Valentine, an attorney for ISS and Cisco called Lynn who directed them to Granick. During the conversation Valentine explained the claims and accusations against Lynn, which included three things: 1) ISS claimed copyright over the presentation that Lynn gave, 2) Cisco claimed copyright over the decompiled machine code obtained from the router which was included in the presentation, and 3) Cisco claimed the presentation contained trade secrets. These complaints were outlined in a civil complaint at the U.S. Northern District of California and filed against both Lynn and Black Hat. According to Granick, she and Valentine were able agree to an injunction to settle the case without court proceedings. This deal was almost called off due to an inadvertent mistake by Black Hat in which they had restored Lynn's presentation on their web server. Black Hat, Granick, and the plaintiff's lawyers were able to resolve this problem and the deal stood. One condition of the settlement required Lynn to provide an image of all computer data he used in his research to be provided to a third party for forensic analysis before erasing his research and any Cisco data from his systems. The settlement also stipulated that Lynn was prohibited from talking about the vulnerability in the future. == FBI Investigation == Shortly after lawyers for Lynn and ISS / Cisco filed settlement papers, FBI agents from the Las Vegas office arrived at the conference to begin asking questions. According to Granick, they were there at the request of the Atlanta FBI office and Lynn was not of interest. Granick asserted the Fifth and Sixth amendment rights on behalf of her client, Lynn. Granick asserted his rights for the Atlanta office and asked if an arrest warrant had been issued for Lynn. Over the next 24 hours Granick was not able to ascertain the status of a warrant but ultimately determined no warrant was issued. When the FBI was asked about the case by a journalist, spokesman Paul Bresson declined to discuss the case saying "Our policy is to not make any comment on anything that is ongoing. That's not to confirm that something is, because I really don't know". Granick would only confirm to journalists that the "investigation has to do with the presentation". == Response == === Attendees === Attendees of Black Hat Briefings, as well as many that also attended DEF CON, were not happy with vendors threatening legal action over vulnerability disclosure. The term "Ciscogate" was coined quickly by an unknown person, but some attendees were quick to create shirts to commemorate the incident. === Cisco === Mojgan Khalili, a senior manager for corporate PR at Cisco, issued a statement to the press saying "It is important to note that the information Mr. Lynn presented was not a disclosure of a new vulnerability or a flaw with Cisco IOS software. Mr. Lynn's research explores possible ways to expand exploitations of existing security vulnerabilities impacting routers." === ISS === Kim Duffy, managing director of ISS Australia, was asked about ISS's response to the incident. Duffy responded that it was "business as usual" as the company handled the incident "strictly by the book". He gave a brief statement to ZDNet UK saying "ISS has published rules for disclosure and that is what we stick to. We didn't care to publish [the disclosure] because we were not ready. We had not completed the research to our satisfaction so it was not ready to be disclosed". ISS spokesperson Roger Fortier confirmed that Lynn was no longer employed with the company and that ISS was still working with Cisco on the matter. He gave a statement to the Washington Post saying "ISS and Cisco have been working on this in the background and didn't feel at this time that the material was ready for publication. The decision was made on Monday to pull the presentation because we wanted to make sure the research was fully baked."

  Read more →