AI Avatar Kids

AI Avatar Kids — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Adversarial machine learning

Adversarial machine learning is the study of the attacks on machine learning algorithms, and of the defenses against such attacks. Machine learning techniques are mostly designed to work on specific problem sets, under the assumption that the training and test data are generated from the same statistical distribution (IID). However, this assumption is often violated in practical high-stake applications, where users may intentionally supply fabricated data that violates the statistical assumption. Most common attacks in adversarial machine learning include evasion attacks, data poisoning attacks, Byzantine attacks and model extraction. == History == At the MIT Spam Conference in January 2004, John Graham-Cumming showed that a machine-learning spam filter could be used to defeat another machine-learning spam filter by automatically learning which words to add to a spam email to get the email classified as not spam. In 2004, Nilesh Dalvi and others noted that linear classifiers used in spam filters could be defeated by simple "evasion attacks" as spammers inserted "good words" into their spam emails. (Around 2007, some spammers added random noise to fuzz words within "image spam" in order to defeat OCR-based filters.) In 2006, Marco Barreno and others published "Can Machine Learning Be Secure?", outlining a broad taxonomy of attacks. As late as 2013 many researchers continued to hope that non-linear classifiers (such as support vector machines and neural networks) might be robust to adversaries, until Battista Biggio and others demonstrated the first gradient-based attacks on such machine-learning models (2012–2013). In 2012, deep neural networks began to dominate computer vision problems; starting in 2014, Christian Szegedy and others demonstrated that deep neural networks could be fooled by adversaries, again using a gradient-based attack to craft adversarial perturbations. Further work would show that adversarial attacks are harder to produce in uncontrolled environments, due to the different environmental constraints that cancel out the effect of noise. For example, any small rotation or slight illumination on an adversarial image can destroy the adversariality. In addition, researchers such as Google Brain's Nick Frosst point out that it is much easier to make self-driving cars miss stop signs by physically removing the sign itself, rather than creating adversarial examples. Frosst also believes that the adversarial machine learning community incorrectly assumes models trained on a certain data distribution will also perform well on a completely different data distribution. He suggests that a new approach to machine learning should be explored, and is currently working on a unique neural network that has characteristics more similar to human perception than state-of-the-art approaches. While adversarial machine learning continues to be heavily rooted in academia, large tech companies such as Google, Microsoft, and IBM have begun curating documentation and open source code bases to allow others to concretely assess the robustness of machine learning models and minimize the risk of adversarial attacks. === Examples === Examples include attacks in spam filtering, where spam messages are obfuscated through the misspelling of "bad" words or the insertion of "good" words; attacks in computer security, such as obfuscating malware code within network packets or modifying the characteristics of a network flow to mislead intrusion detection; attacks in biometric recognition where fake biometric traits may be exploited to impersonate a legitimate user; or to compromise users' template galleries that adapt to updated traits over time. Researchers showed that by changing only one-pixel it was possible to fool deep learning algorithms. Others 3-D printed a toy turtle with a texture engineered to make Google's object detection AI classify it as a rifle regardless of the angle from which the turtle was viewed. Creating the turtle required only low-cost commercially available 3-D printing technology. A machine-tweaked image of a dog was shown to look like a cat to both computers and humans. A 2019 study reported that humans can guess how machines will classify adversarial images. Researchers discovered methods for perturbing the appearance of a stop sign such that an autonomous vehicle classified it as a merge or speed limit sign. A data poisoning filter called Nightshade was released in 2023 by researchers at the University of Chicago. It was created for use by visual artists to put on their artwork to corrupt the data set of text-to-image models, which usually scrape their data from the internet without the consent of the image creator. McAfee attacked Tesla's former Mobileye system, fooling it into driving 50 mph over the speed limit, simply by adding a two-inch strip of black tape to a speed limit sign. Adversarial patterns on glasses or clothing designed to deceive facial-recognition systems or license-plate readers, have led to a niche industry of "stealth streetwear". An adversarial attack on a neural network can allow an attacker to inject algorithms into the target system. Researchers can also create adversarial audio inputs to disguise commands to intelligent assistants in benign-seeming audio; a parallel literature explores human perception of such stimuli. Clustering algorithms are used in security applications. Malware and computer virus analysis aims to identify malware families, and to generate specific detection signatures. In the context of malware detection, researchers have proposed methods for adversarial malware generation that automatically craft binaries to evade learning-based detectors while preserving malicious functionality. Optimization-based attacks such as GAMMA use genetic algorithms to inject benign content (for example, padding or new PE sections) into Windows executables, framing evasion as a constrained optimization problem that balances misclassification success with the size of the injected payload and showing transferability to commercial antivirus products. Complementary work uses generative adversarial networks (GANs) to learn feature-space perturbations that cause malware to be classified as benign; Mal-LSGAN, for instance, replaces the standard GAN loss with a least-squares objective and modified activation functions to improve training stability and produce adversarial malware examples that substantially reduce true positive rates across multiple detectors. == Challenges in applying machine learning to security == Researchers have observed that the constraints under which machine-learning techniques function in the security domain are different from those of common benchmark domains. Security data may change over time, include mislabeled samples, or reflect adversarial behavior, which complicates evaluation and reproducibility. === Data collection issues === Security datasets vary across formats, including binaries, network traces, and log files. Studies have reported that the process of converting these sources into features can introduce bias or inconsistencies. In addition, time-based leakage can occur when related malware samples are not properly separated across training and testing splits, which may lead to overly optimistic results. === Labeling and ground truth challenges === Malware labels are often unstable because different antivirus engines may classify the same sample in conflicting ways. Ceschin et al. note that families may be renamed or reorganized over time, causing further discrepancies in ground truth and reducing the reliability of benchmarks. === Concept drift === Because malware creators continuously adapt their techniques, the statistical properties of malicious samples also change. This form of concept drift has been widely documented and may reduce model performance unless systems are updated regularly or incorporate mechanisms for incremental learning. === Feature robustness === Researchers differentiate between features that can be easily manipulated and those that are more resistant to modification. For example, simple static attributes, such as header fields, may be altered by attackers, while structural features, such as control-flow graphs, are generally more stable but computationally expensive to extract. === Class imbalance === In realistic deployment environments, the proportion of malicious samples can be extremely low, ranging from 0.01% to 2% of total data. This unbalanced distribution causes models to develop a bias towards the majority class, achieving high accuracy but failing to identify malicious samples. Prior approaches to this problem have included both data-level solutions and sequence-specific models. Methods like n-gram and Long Short-Term Memory (LSTM) networks can model sequential data, but their performance has been shown to decline significantly when malware samples are realistically proportioned in the training set, demonstrating the limitations in
Read more →
Group of Governmental Experts on Lethal Autonomous Weapons Systems

The Group of Governmental Experts on Lethal Autonomous Weapons Systems, commonly known as the GGE on LAWS, refers to a group of governmental experts established under the framework of the Convention on Certain Conventional Weapons (CCW), a United Nations arms control framework. The group examines legal, ethical, societal and moral questions that arise from the increased use of autonomous robots to carry weapons and to be programmed to engage in combat in various situations that might arise, including battles between countries, or in patrolling border areas or sensitive areas, or other similar roles. As of 18 March 2025, the Convention on Certain Conventional Weapons had 128 High Contracting Parties. In the Geneva Conventions, the term "High Contracting Parties" refers to the states that have joined the conventions and are therefore bound to uphold them. Among the countries that have joined are states with tense relations or ongoing armed conflict with one another, including Russia and Ukraine, Israel and the State of Palestine, and Pakistan and Afghanistan. == Background == In 2013, the Meeting of State Parties to the Convention on Certain Conventional Weapons agreed on a mandate on lethal autonomous weapon systems and tasked its chairperson with convening an informal Meeting of Experts to discuss issues related to emerging technologies in the area of LAWS. Those informal Meetings of Experts were then held in 2014, 2015 and 2016, and their reports fed into subsequent meetings of the High Contracting Parties. At the Fifth CCW Review Conference in 2016, the High Contracting Parties decided to establish an open-ended Group of Governmental Experts on emerging technologies in the area of LAWS, building on the earlier expert meetings. Since then, the group has been reconvened annually. In 2023, the Meeting of the High Contracting Parties to the CCW decided that the GGE on LAWS would continue its work in 2024 and 2025. The group was tasked with developing, by consensus, elements of a possible instrument, without predetermining its form, as well as other measures addressing lethal autonomous weapon systems, drawing on existing CCW protocols, earlier recommendations, state proposals, and legal, military, and technological expertise. == 2024 == In 2024, the GGE met twice, and the group was chaired by Robert in den Bosch, the Netherlands' disarmament ambassador. The 2024 Meeting of the High Contracting Parties decided that the group would meet for 10 days in 2025, in two five-day sessions, and reaffirmed its mandate to continue work by consensus on possible elements of an instrument and other measures addressing lethal autonomous weapon systems. == 2025 == At its first 2025 session, held in Geneva from 3 to 7 March 2025, the Group of Governmental Experts on Lethal Autonomous Weapon Systems discussed revisions to the chair's rolling text. The text was structured into five sections, or "boxes", though delegates held differing views on whether headings were useful or appropriate. Broadly, the discussions covered the characterization of lethal autonomous weapon systems, the application of international humanitarian law, possible prohibitions and regulations, legal review, and questions of accountability and responsibility. At its second session, held from 1 to 5 September 2025, delegations continued work on the chair's rolling text, which set out elements of a possible instrument and was organized into five thematic "boxes". == 2026 == === Developments before the 2026 session === A few weeks before the meeting, autonomous weapons drew renewed attention when the United States pressured Anthropic to revise the terms of use for its AI model Claude. Anthropic prohibited the model's use for mass domestic surveillance and for fully autonomous weapons operating without human oversight, while reports also emerged that OpenAI had reached an agreement with the U.S. Department of War for the use of its AI models, reportedly stipulating that they would not independently direct autonomous weapons where human control was required. The U.S. military nevertheless continued to use Claude during its war on Iran, and there was increasing alarm about the use of AI-assisted semi-autonomous weapons in conflicts including those in Ukraine, Sudan, Gaza, and Iran. Before the start of the sessions, Robert in den Bosch, as chair, warned that progress was urgent because technological developments were moving quickly. At the same time, although states agreed that international humanitarian law applied to LAWS, specific internationally binding standards governing such systems remained largely absent. A key divide before the session was that Russia and the United States opposed new legally binding instruments, while other states argued that new rules were necessary. According to Robert in den Bosch, the talks could lead to new rules, amendments to an existing convention, or a new treaty. === First session === From 2 to 6 March 2026, the group held its penultimate session under the group's three-year mandate. Delegations discussed the chair's rolling draft text, circulated in December 2025, on elements of a possible instrument or other measures concerning lethal autonomous weapon systems. In revised text circulated by the chair on 5 March 2026, a lethal autonomous weapon system was characterized as "a functionally integrated combination of one or more weapons and technological components, that can identify, select, and engage a target, without intervention by a human operator in the execution of these tasks". The text was divided into five boxes to structure discussion. During the session, delegates conducted a first reading of the draft text, and the chair later circulated revised language for several sections. Informal consultations were also held. According to campaign groups and participating observers, support grew during the week for moving to negotiations on the basis of the rolling text, with more than 70 states said to support that step by the end of the session, though some participants warned that attempts to bridge differences risked blurring the group's core purpose. The International Committee of the Red Cross argued that the text should not only restate existing international humanitarian law, but also clarify how those rules apply to autonomous weapons and set out additional measures tailored to the specific challenges such systems raise. Stop Killer Robots likewise emphasized the need to preserve meaningful human judgment and control over increasingly autonomous systems. During the discussions, the U.S. delegation opposed the term "human control" and reportedly proposed the alternative phrase "good faith human judgment and care". Other delegations rejected that wording as too weak, while many states continued to insist that meaningful human control over weapon systems remained essential.
Read more →
Office automation

Office automation refers to the varied computer machinery and software used to digitally create, collect, store, manipulate, and relay office information needed for accomplishing basic tasks. Raw data storage, electronic transfer, and the management of electronic business information comprise the basic activities of an office automation system. Office automation helps in optimizing or automating existing office procedures. The backbone of office automation is a local area network, which allows users to transfer data, mail and voice across the network. All office functions, including dictation, typing, filing, copying, fax, telex, microfilm and records management, telephone and telephone switchboard operations, fall into this category. Office automation was a popular term in the 1970s and 1980s as the desktop computer exploded onto the scene. Advantages of office automation include that it can get many tasks accomplished faster, it eliminates the need for a large staff, less storage is required to store data, and multiple people can update data simultaneously in the event of changes in schedule. == Outline == Businesses can easily purchase and stock their wares with the aid of technology. Many of the manual tasks that used to be done by hand can now be done through hand held devices and UPC and SKU coding. In the retail setting, automation also increases choice. Customers can easily process their payments through automated credit card machines and no longer have to wait in line for an employee to process and manually type in the credit card numbers. Office payrolls have been automated, which means no one has to manually cut checks, and those checks that are cut can be printed through computer programs. Direct deposit can be automatically set up and this further reduces the manual process, and most employees who participate in direct deposit often find their paychecks come earlier than if they'd have to wait for their checks to be written and then cleared by the bank. Other ways automation has reduced employee manpower on tasks is automated voice direction. Through the use of prompts, automated phone menus and directed calls, the need for employees to be dedicated to answer the phones has been reduced, and in some cases, eliminated.
Read more →
Normalization (image processing)

In image processing, normalization is a process that changes the range of pixel intensity values, a kind of intensity mapping. Applications include photographs with poor contrast due to glare, for example. A typical case is contrast stretching. In more general fields of data processing, such as digital signal processing, it is referred to as dynamic range expansion. The purpose of dynamic range expansion in the various applications is usually to bring the image, or other type of signal, into a range that is more familiar or normal to the senses, hence the term normalization. Often, the motivation is to achieve consistency in dynamic range for a set of data, signals, or images to avoid mental distraction or fatigue. For example, a newspaper will strive to make all of the images in an issue share a similar range of grayscale. Auto-normalization in image processing software typically normalizes to the full dynamic range of the number system specified in the image file format. == Definition == Normalization transforms an n-dimensional grayscale image I : { X ⊆ R n } → { Min , . . , Max } {\displaystyle I:\{\mathbb {X} \subseteq \mathbb {R} ^{n}\}\rightarrow \{{\text{Min}},..,{\text{Max}}\}} with intensity values in the range ( Min , Max ) {\displaystyle ({\text{Min}},{\text{Max}})} , into a new image I N : { X ⊆ R n } → { newMin , . . , newMax } {\displaystyle I_{N}:\{\mathbb {X} \subseteq \mathbb {R} ^{n}\}\rightarrow \{{\text{newMin}},..,{\text{newMax}}\}} with intensity values in the range ( newMin , newMax ) {\displaystyle ({\text{newMin}},{\text{newMax}})} . The linear normalization of a grayscale digital image is performed according to the formula I N = ( I − Min ) newMax − newMin Max − Min + newMin {\displaystyle I_{N}=(I-{\text{Min}}){\frac {{\text{newMax}}-{\text{newMin}}}{{\text{Max}}-{\text{Min}}}}+{\text{newMin}}} For example, if the intensity range of the image is 50 to 180 and the desired range is 0 to 255 the process entails subtracting 50 from each of pixel intensity, making the range 0 to 130. Then each pixel intensity is multiplied by 255/130, making the range 0 to 255. Normalization might also be non-linear, as the relationship between I {\displaystyle I} and I N {\displaystyle I_{N}} may not be linear. An example of non-linear normalization is when the normalization follows a sigmoid function, in which case the normalized image is computed according to the formula I N = ( newMax − newMin ) 1 1 + e − I − β α + newMin {\displaystyle I_{N}=({\text{newMax}}-{\text{newMin}}){\frac {1}{1+e^{-{\frac {I-\beta }{\alpha }}}}}+{\text{newMin}}} Where α {\displaystyle \alpha } defines the width of the input intensity range, and β {\displaystyle \beta } defines the intensity around which the range is centered. Gamma correction (log/inverse log) is also a common transformation function. === Colorspace === Intensity operations generally operate on a colorspace that maps to the human perception of lightness without intentionally changing the other properties. This can be done, for example, by operating on the L component of the CIELAB color space, or approximately by operating on the Y component of YCbCr. It is also possible to operate on each of the RGB color channels, though the result will not always make sense. == Contrast stretching == This is the most significant and essential technique of spatial-based image enhancement. The basic intent of this contrast enhancement technique is to adjust the local contrast in the image so as to bring out the clear regions or objects in the image. Low-contrast images often result from poor or non-uniform lighting conditions, a limited dynamic range of the imaging sensor, or improper settings of the lens aperture. This operation tries to change the intensity of the pixel in the image, particularly in the input image, to obtain an enhanced image. It is based on the number of techniques, namely local, global, dark and bright levels of contrast. The contrast enhancement is considered as the amount of color or gray differentiation that lies among the different features in an image. The contrast enhancement improves the quality of image by increasing the luminance difference between the foreground and background. A contrast stretching transformation can be achieved by: Stretching the dark range of input values into a wider range of output values: This involves increasing the brightness of the darker areas in the image to enhance details and improve visibility. Shifting the mid-range of input values: This involves adjusting the brightness levels of the mid-tones in the image to improve overall contrast and clarity. Compressing the bright range of input values: This process involves reducing the brightness of the brighter areas in the image to prevent overexposure resulting in a more balanced and visually appealing image. It can be described as the following piecewise funciton: I N = { s 1 r 1 I if I < r 1 s 2 − s 1 r 1 − r 2 ( I − r 1 ) if r 1 ≤ I ≤ r 2 1 − s 2 1 − r 2 ( I − r 2 ) if I > r 2 {\displaystyle I_{N}={\begin{cases}{\frac {s_{1}}{r_{1}}}I&{\text{if }}Ir_{2}\end{cases}}} Where: ( r 1 , s 1 ) {\displaystyle (r_{1},s_{1})} defines the transition point between the "dark" range to the "main" range. ( r 2 , s 2 ) {\displaystyle (r_{2},s_{2})} defines the transition point between the "main" range to the "bright" range. A typical linear stretch is obtained when ( r 1 , s 1 ) = ( r min , 0 ) {\displaystyle (r_{1},s_{1})=(r_{\text{min}},0)} and ( r 2 , s 2 ) = ( r max , 1 ) {\displaystyle (r_{2},s_{2})=(r_{\text{max}},1)} , where r min {\displaystyle r_{\text{min}}} and r max {\displaystyle r_{\text{max}}} denote the minimum and maximum levels in the source image. === Global contrast stretching === Global Contrast Stretching considers all color palate ranges at once to determine the maximum and minimum values for the entire RGB color image. This approach utilizes the combination of RGB colors to derive a single maximum and minimum value for contrast stretching across the entire image. === Local contrast stretching === Local contrast stretching (LCS) is an image enhancement method that focuses on locally adjusting each pixel's value to improve the visualization of structures within an image, particularly in both the darkest and lightest portions. It operates by utilizing sliding windows, known as kernels, which traverse the image. The central pixel within each kernel is adjusted using the following formula: I p ( x , y ) = 255 × [ I 0 ( x , y ) − m i n ] ( m a x − m i n ) {\displaystyle I_{p}(x,y)=255\times {\frac {[I_{0}(x,y)-min]}{(max-min)}}} Where: Ip(x,y) is the color level for the output pixel (x,y) after the contrast stretching process. I0(x,y) is the color level input for data pixel (x, y). max is the maximum value for color level in the input image within the selected kernel. min is the minimum value for color level in the input image within the selected kernel. A piecewise form (see above) may also be used. LCS can be applied to the three color channels of an image separately.
Read more →
Bandhan Tod

Bandhan Tod is a mobile app to stop child marriage in India's Bihar state through SOS button in the app. When the SOS on Bandhan Tod is activated, the nearest small NGO will attempt to resolve the issue. If the family resists, then the police gets notified. Till now so many child marriages has been cancelled through Bandhan Tod interventions. Bandhan Tod is an initiative of Gender Alliance managed by Prashanti Tiwari to support the state government's efforts to end child marriage and dowry.
Read more →
Quack.com

Quack.com was an early voice portal company. The domain name later was used for Quack, an iPad search application from AOL. == History == It was founded in 1998 by Steven Woods, Jeromy Carriere and Alex Quilici as a Pittsburgh, Pennsylvania, USA, based voice portal infrastructure company named Quackware. Quack was the first company to try to create a voice portal: a consumer-based destination "site" in which consumers could not only access information by voice alone, but also complete transactions. Quackware launched a beta phone service in 1999 that allowed consumers to purchase books from sites such as Amazon and CDs from sites such as CDNow by answering a short set of questions. Quack followed with a set of information services from movie listings (inspired by, but expanding upon, Moviefone) to news, weather and stock quotes. This concept introduced a series of lookalike startups including Tellme Networks which raised more money than any Internet startup in history on a similar concept. Quack received its first venture funding from HDL Capital in 1999 and moved operations to Mountain View in Silicon Valley, California in 1999. A deal with Lycos was announced in May 2000. In September 2000 Quack was acquired for $200 million by America Online (AOL) and moved onto the Netscape campus with what was left of the Netscape team. Quack was attacked in the Canadian press for being representative of the Canadian "brain drain" to the US during the Internet bubble, focusing its recruiting efforts on the University of Waterloo, hiring more than 50 engineers from Waterloo in less than 10 months. Quack competitor Tellme Networks raised enormous funds in what became a highly competitive market in 2000, with the emergence of more than a dozen additional competitors in a 12-month period. Following its acquisition by America Online in an effort led by Ted Leonsis to bring Quack into AOL Interactive, the Quack voice service became AOLbyPhone as one of AOL's "web properties" along with MapQuest, Moviefone and others. Quack secured several patents that underlie the technical challenges of delivering interactive voice services. Constructing a voice portal required integrations and innovations not only in speech recognition and speech generation, but also in databases, application specification, constraint-based reasoning and artificial intelligence and computational linguistics. "Quack"'s name derived from the company goal of providing not only voice-based services, but more broadly "Quick Ubiquitous Access to Consumer Knowledge". The patents assigned to Quack.com include: System and method for voice access to Internet-based information, System and method for advertising with an Internet Voice Portal and recognizing the axiom that in interactive voice systems one must "know the set of possible answers to a question before asking it". System and method for determining if one web site has the same information as another web site. Quack.com was spoofed in The Simpsons in March 2002 in the episode "Blame It on Lisa" in which a "ComQuaak" sign is replaced by another equally crazy telecom company name. == 2010 onwards == In July 2010, quack.com became the focus of a new AOL iPad application, that was a web search experience. The product delivers web results and blends in picture, video and Twitter results. It enables you to preview the web results before you go to the site, search within each result, and flip through the results pages, making full use of the iPad's touch screen features. The iPad app was free via iTunes, but support discontinued in 2012.
Read more →
Adobe After Effects

Adobe After Effects is a digital effects, motion graphics, and compositing application developed by Adobe Inc.; it is used for animation and in the post-production process of film making, video games and television production. Among other things, After Effects can be used for keying, tracking, compositing, and animation. It also functions as a very basic non-linear editor, audio editor, and media transcoder. In 2019, the program won an Academy Award for scientific and technical achievement. == History == After Effects was originally created by David Herbstman, David Simons, Daniel Wilk, David M. Cotter, and Russell Belfer at the Company of Science and Art in Providence, Rhode Island. The first two versions of the software, 1.0 (January 1993) and 1.1, were released there by the company. CoSA with After Effects was acquired by Aldus Corporation in July 1993, which in turn was acquired by Adobe in 1994. Adobe acquired PageMaker as well. Adobe's first new release of After Effects was version 3.0. == Third-party integrations == After Effects functionality can be extended through a variety of third-party integrations. The most common integrations are: plug-ins, scripts, and extensions. === Plug-ins === Plug-ins are predominantly written in C or C++ and extend the functionality of After Effects, allowing for more advanced features such as particle systems, physics engines, 3D effects, and the ability to bridge the gap between After Effects and another. === Scripts === After Effects Scripts are a series of commands written in both JavaScript and the ExtendScript language. After Effects Scripts, unlike plug-ins, can only access the core functionality of After Effects. Scripts are often developed to automate repetitive tasks, to simplify complex After Effects features, or to perform complex calculations that would otherwise take a long time to complete. Scripts can also use some functionality not directly exposed through the graphical user interface. === Extensions === After Effects Extensions offer the ability to extend After Effects functionality through modern web development technologies like HTML5, and Node.js, without the need for C++. After Effects Extensions make use of Adobe's Common Extensibility Platform or CEP Panels, which means they can be built to interact with other Adobe CC apps.
Read more →
D/Vision Pro

D/Vision Pro was one of the earliest marketed non-linear editing systems. It was released by TouchVision Systems, Inc. in the mid-1990s. The program was DOS-based and worked on either Intel's 386 or 486 processor. The system used AVI compression and worked with the Action Media II board. The system allowed users to digitize video, audio, and timecode, create an edit decision list (EDL), instantly play back the edited program, and output the finished EDL in a wide variety of formats. These cost-effective editing systems were used by numerous independent filmmakers and in low-budget productions during the mid-late 1990s. D/Vision Pro's low-quality compression led TouchVision (later renamed D/Vision Systems) to abandon it in favor of D/Vision Online, which was purchased by Discreet Logic and renamed edit. In June 2002, Discreet discontinued edit, as they did not want it to interfere with smoke sales which were more profitable. Discreet was later purchased by Autodesk.
Read more →
Socially assistive robot

A socially assistive robot (SAR) aids users through social engagement and support rather than through physical tasks and interactions. == Background == The field of socially assistive robotics emerged in the early 2000s, following the emergence of the field of social robots. In contrast to social robots, SARs aid users with specific goals related to behavior change rather than serving as purely social entities. The term "Socially assistive robot" was initially defined by Maja Matarić and David Feil-Seifer in 2005. Since its inception, the field has gained substantial recognition, featuring numerous research projects, a wealth of global research publications, startup companies, and a growing array of products on the consumer market. The COVID-19 pandemic has underscored the immense potential of socially assistive robots, particularly in addressing the needs of large user populations, including children engaged in remote learning, elderly individuals grappling with loneliness, and those affected by social isolation and its associated negative consequences. == Characteristics of interaction == SARs rely on artificial intelligence (AI) to generate real-time, responsive, natural, and meaningful robot behaviors during interactions with humans. The robots employ various forms of communication, such as facial expressions, gestures, body movements, and speech. In contrast to robots intended for physical tasks, SARs are designed to support and motivate users to perform their own tasks. The tasks a user engages in can be physical (e.g., rehabilitation exercises for post-stroke users), cognitive (e.g., dementia screening for elderly users), or social (e.g., turn-taking for users with autism spectrum disorders). This complex interaction involves detecting and interpreting the user's movement, behavior, intent, goals, speech, and preferences. Machine learning and robot learning techniques are frequently employed to enhance the robot's understanding of the user, predict user preferences, and provide effective assistance. The effectiveness of socially assistive robots is assessed based on objective measurements of user performance and improvement resulting from the robot’s assistance and support. Unlike other branches of robotics, where effectiveness depends on the robot's physical task completion, SAR measures the success of the robot based on the user's progress and achievements. This evaluation is carried out using quantitative objective metrics, such as time spent on tasks, accuracy, retention, and verbalization, as well as quantitative subjective metrics, such as user survey tools. SAR is based on the large body of evidence showing that users tend to respond more positively to interactions with physical robots compared to interactions with screens. Interaction with physical robots also encourages users to learn and retain more information than screen-based interactions. This fundamental insight underlines why physical robots in SAR applications are more effective, as opposed to interactions solely involving screens, tablets, or computers. == Uses and applications == SARs have been developed and validated in a wide array of applications, including healthcare, elder care, education, and training. For example, SARs have been developed to support children on the autism spectrum in acquiring and practicing social and cognitive skills, to motivate and coach stroke patients throughout their rehabilitation exercises, monitoring individuals health (ex. fall detection), and to encourage elderly users to be more physically and socially active. There is a concern that technophobia and lack of trust in robots will pose a barrier to the effectiveness of SARs in older adults.
Read more →
Automated attendant

In telephony, an automated attendant (also auto attendant, auto-attendant, autoattendant, automatic phone menus, AA, or virtual receptionist) allows callers to be automatically transferred to an extension without the intervention of an operator/receptionist. Many AAs will also offer a simple menu system ("for sales, press 1, for service, press 2," etc.). An auto attendant may also allow a caller to reach a live operator by dialing a number, usually "0". Typically the auto attendant is included in a business's phone system such as a PBX, but some services allow businesses to use an AA without such a system. Modern AA services (which now overlap with more complicated interactive voice response or IVR systems) can route calls to mobile phones, VoIP virtual phones, other AAs/IVRs, or other locations using traditional land-line phones or voice message machines. == Feature description == Telephone callers will recognize an automated attendant system as one that greets calls incoming to an organization with a recorded greeting of the form, "Thank you for calling .... If you know your party's extension, you may dial it any time during this message." Callers who have a touch-tone (DTMF) phone can dial an extension number or, in most cases, wait for operator ("attendant") assistance. Since the telephone network does not transmit the DC signals from rotary dial telephones (except for audible clicks), callers who have rotary dial phones have to wait for assistance. On a purely technical level it could be argued that an automated attendant is a very simple kind of IVR however, in the telecom industry the terms IVR and auto attendant are generally considered distinct. An automated attendant serves a very specific purpose (replace live operator and route calls), whereas an IVR can perform all sorts of functions (telephone banking, account inquiries, etc.). An AA will often include a directory which will allow a caller to dial by name in order to find a user on a system. There is no standard format to these directories, and they can use combinations of first name, last name, or both. The following lists common routing steps that are components of an automated attendant: Transfer to extension Transfer to voicemail Play message (i.e., "our address is ...") Go to a sub-menu Repeat choices In addition, an automated attendant would be expected to have values for the following: '0' – where to go when the caller dials '0' Timeout – what to do if the caller does nothing (usually go to the same place as '0') Default mailbox – where to send calls if '0' is not answered (or is not pointing to a live person) == Background == PBXs (private branch exchanges) or PABXs (private automatic branch exchanges) are telephone systems that serve an organization that has many telephone extensions but fewer telephone lines (sometimes called "trunks") that connect that organization to the rest of the global telecommunications network. While persons within an enterprise served by a PBX can call each other by dialing their extension numbers, incoming calls, i.e., calls originating from a telephone not served by the PBX but intended for a party served by the PBX, required assistance from a switchboard operator (also called a "switchboard attendant") or a telephone service called DID ("direct inward dialing"). Direct inward dialing has advantages such as rapid connection to the destination party and disadvantages including cost, lack of identification of the called organization and use of ten-digit telephone numbers. Automated attendants provide, among many other things, a way for an external caller to be directed to an extension or department served by a PBX system without using direct inward dialing or without switchboard attendant assistance. == History == Automated attendants are not part of voicemail systems. Voice messaging (or voicemail or VM) technology has existed since the late 1970s; in the early 1980s companies provided voice-prompting systems that allowed callers to reach (route the call) to an intended party, not necessarily to leave a message. Automated attendant systems are also referred to as automated menu systems and much early work in this field was done by Michael J. Freeman, Ph.D. == Time-based routing == Many auto attendants will have options to allow for time-of-day routing, as well as weekend and holiday routing. The specifics of these features will depend entirely on the particular automated attendant, but typically there would be a normal greeting and routing steps that would take place during normal business hours, and a different greeting and routing for non-business hours.
Read more →
Teleradiology

Teleradiology is the transmission of radiological patient images from procedures such as x-rays, Computed tomography (CT), and MRI imaging, from one location to another for the purposes of sharing studies with other radiologists and physicians. Teleradiology allows radiologists to provide services without actually having to be at the location of the patient. This is particularly important when a sub-specialist such as an MRI radiologist, neuroradiologist, pediatric radiologist, or musculoskeletal radiologist is needed, since these professionals are generally only located in large metropolitan areas working during daytime hours. Teleradiology allows for specialists to be available at all times. Teleradiology utilizes standard network technologies such as the Internet, telephone lines, wide area networks, local area networks (LAN) and the latest advanced technologies such as medical cloud computing. Specialized software is used to transmit the images and enable the radiologist to effectively analyze potentially hundreds of images of a given study. Technologies such as advanced graphics processing, voice recognition, artificial intelligence, and image compression are often used in teleradiology. Through teleradiology and mobile DICOM viewers, images can be sent to another part of the hospital or to other locations around the world with equal effort. Teleradiology is a growth technology given that imaging procedures are growing approximately 15% annually against an increase of only 2% in the radiologist population. == Reports == Teleradiology services commonly provide either preliminary or final interpretations of medical imaging studies. Preliminary reads are frequently used in emergency settings to support immediate clinical decisions and may include direct communication of critical findings to the referring physician. Some providers report turnaround times of approximately 30 minutes for emergency cases, with faster processing for time-sensitive conditions such as stroke. Final reads are definitive and used in official patient records and billing. These reports typically include all relevant findings and may require access to prior imaging and clinical data. Teleradiology is also employed to provide off-hour or overflow coverage for healthcare institutions lacking continuous on-site radiology staffing. == Subspecialties == Some teleradiologists are fellowship trained and have a wide variety of subspecialty expertise including such difficult-to-find areas as neuroradiology, pediatric neuroradiology, thoracic imaging, musculoskeletal radiology, mammography, and nuclear cardiology. There are also various medical practitioners who are not radiologists that take on studies in radiology to become sub specialists in their respected fields, an example of this is dentistry where oral and maxillofacial radiology allows those in dentistry to specialize in the acquisition and interpretation of radiographic imaging studies performed for diagnosis of treatment guidance for conditions affecting the maxillofacial region. == Teleultrasound == Teleradiology infrastructure has also been adapted to support point-of-care ultrasound (POCUS) in remote and austere environments. In teleultrasound—also known as telementored ultrasound—a remote expert guides a non-specialist in real time during image acquisition. This technique has been successfully demonstrated in extreme settings, including aboard the International Space Station, on Mount Everest, and during helicopter flight. == Regulations == In the United States, Medicare and Medicaid laws require the teleradiologist to be on U.S. soil in order to qualify for reimbursement of the Final Read. In addition, advanced teleradiology systems must also be HIPAA compliant, which helps to ensure patients' privacy. HIPAA (Health Insurance Portability and Accountability Act of 1996) is a uniform, federal floor of privacy protections for consumers. It limits the ways that entities can use patients' personal information and protects the privacy of all medical information no matter what form it is in. Quality teleradiology must abide by important HIPAA rules to ensure patients' privacy is protected. Also State laws governing the licensing requirements and medical malpractice insurance coverage required for physicians vary from state to state. Ensuring compliance with these laws is a significant overhead expense for larger multi-state teleradiology groups. Medicare (Australia) has identical requirements to that of the United States, where the guidelines are provided by the Department of Health and Ageing, and government based payments fall under the Health Insurance Act. The regulations in Australia are also conducted at both federal and state levels, ensuring that strict guidelines are adhered to at all times, with regular yearly updates and amendments are introduced (usually around March and November of every year), ensuring that the legislation is kept up to date with changes in the industry. One of the most recent changes to Medicare and radiology / teleradiology in Australia was the introduction of the Diagnostic Imaging Accreditation Scheme (DIAS) on 1 July 2008. DIAS was introduced to further improve the quality of Diagnostic Imaging and to amend the Health Insurance Act. == Industry growth == Until the late 1990s teleradiology was primarily used by individual radiologists to interpret occasional emergency studies from offsite locations, often in the radiologists home. The connections were made through standard analog phone lines. Teleradiology expanded rapidly as the growth of the internet and broad band combined with new CT scanner technology to become an essential tool in trauma cases in emergency rooms throughout the country. The occasional 2–3 x-ray studies a week soon became 3–10 CT scans, or more, a night. Because ER physicians are not trained to read CT scans or MRIs, radiologists went from working 8–10 hours a day, five and half days a week to a schedule of 24 hours a day, 7 days a week coverage. This became a particularly acute challenge in smaller rural facilities that only had one solo radiologist with no other to share call. These circumstances spawned a post-dot.com boom of firms and groups that provided medical outsourcing, off-site teleradiology on-call services to hospitals and Radiology Groups around the country. As an example, a teleradiology firm might cover trauma at a hospital in Indiana with doctors based in Texas. Some firms even used overseas doctors in locations like Australia and India. Nighthawk, founded by Paul Berger, was the first to station U.S. licensed radiologists overseas (initially Australia and later Switzerland) to maximize the time zone difference to provide nightcall in U.S. hospitals. Currently, teleradiology firms are facing pricing pressures. Industry consolidation is likely as there are more than 500 of these firms, large and small, throughout the United States.
Read more →
Rapid prototyping

Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually done using 3D printing or "additive layer manufacturing" technology. The first methods for rapid prototyping became available in mid 1987 and were used to produce models and prototype parts. Today, they are used for a wide range of applications and are used to manufacture production-quality parts in relatively small numbers if desired without the typical unfavorable short-run economics. This economy has encouraged online service bureaus. Historical surveys of RP technology start with discussions of simulacra production techniques used by 19th-century sculptors. Some modern sculptors use the progeny technology to produce exhibitions and various objects. The ability to reproduce designs from a dataset has given rise to issues of rights, as it is now possible to interpolate volumetric data from 2D images. As with CNC subtractive methods, the computer-aided-design – computer-aided manufacturing CAD -CAM workflow in the traditional rapid prototyping process starts with the creation of geometric data, either as a 3D solid using a CAD workstation, or 2D slices using a scanning device. For rapid prototyping this data must represent a valid geometric model; namely, one whose boundary surfaces enclose a finite volume, contain no holes exposing the interior, and do not fold back on themselves. In other words, the object must have an "inside". The model is valid if for each point in 3D space the computer can determine uniquely whether that point lies inside, on, or outside the boundary surface of the model. CAD post-processors will approximate the application vendors' internal CAD geometric forms (e.g., B-splines) with a simplified mathematical form, which in turn is expressed in a specified data format which is a common feature in additive manufacturing: STL file format, a de facto standard for transferring solid geometric models to SFF machines. To obtain the necessary motion control trajectories to drive the actual SFF, rapid prototyping, 3D printing or additive manufacturing mechanism, the prepared geometric model is typically sliced into layers, and the slices are scanned into lines (producing a "2D drawing" used to generate trajectory as in CNC's toolpath), mimicking in reverse the layer-to-layer physical building process. == Application areas == Rapid prototyping is also commonly applied in software engineering to try out new business models and application architectures such as Aerospace, Automotive, Financial Services, Product development, and Healthcare. Aerospace design and industrial teams rely on prototyping in order to create new AM methodologies in the industry. Using SLA they can quickly make multiple versions of their projects in a few days and begin testing quicker. Rapid Prototyping allows designers/developers to provide an accurate idea of how the finished product will turn out before putting too much time and money into the prototype. 3D printing being used for Rapid Prototyping allows for Industrial 3D printing to take place. With this, you could have large-scale moulds to spare parts being pumped out quickly within a short period of time. == Types of Rapid Prototyping == Stereolithography (SLA) → a laser-cured photopolymer for materials such as thermoplastic-like photopolymers. Selective Laser Sintering (SLS) → a laser-sintered powder for materials such as Nylon or TPU. Direct Metal Laser Sintering (DMLS) → laser-sintered metal powder for materials like stainless steel, titanium, chrome, and aluminum. Fused Deposition Modeling (FDM) → fused extrusions of filaments like ABS, PC, and PPCU. Multi Jet Fusion (MJF) → it is an inkjet array selective fusing across bed of nylon powder for Black Nylon 12. PolyJet (PJET) → it is a uv-cured jetted photopolymer to work with acrylic-based and elastomeric photopolymers. Computer Numerical Controlled Machine (CNC) → it is used for manipulating engineering-grade thermoplastics and metals. Injection Molding (IM) → the injection is done using aluminum molds and it is used for thermoplastics, metals and liquid silicone rubber. Vacuum Casting→ is a manufacturing process used to create high-quality prototypes and small batches of parts. == History == In the 1970s, Joseph Henry Condon and others at Bell Labs developed the Unix Circuit Design System (UCDS), automating the laborious and error-prone task of manually converting drawings to fabricate circuit boards for the purposes of research and development. By the 1980s, U.S. policy makers and industrial managers were forced to take note that America's dominance in the field of machine tool manufacturing evaporated, in what was named the machine tool crisis. Numerous projects sought to counter these trends in the traditional CNC CAM area, which had begun in the US. Later when Rapid Prototyping Systems moved out of labs to be commercialized, it was recognized that developments were already international and U.S. rapid prototyping companies would not have the luxury of letting a lead slip away. The National Science Foundation was an umbrella for the National Aeronautics and Space Administration (NASA), the US Department of Energy, the US Department of Commerce NIST, the US Department of Defense, Defense Advanced Research Projects Agency (DARPA), and the Office of Naval Research coordinated studies to inform strategic planners in their deliberations. One such report was the 1997 Rapid Prototyping in Europe and Japan Panel Report in which Joseph J. Beaman founder of DTM Corporation [DTM RapidTool pictured] provides a historical perspective: The roots of rapid prototyping technology can be traced to practices in topography and photosculpture. Within TOPOGRAPHY Blanther (1892) suggested a layered method for making a mold for raised relief paper topographical maps .The process involved cutting the contour lines on a series of plates which were then stacked. Matsubara (1974) of Mitsubishi proposed a topographical process with a photo-hardening photopolymer resin to form thin layers stacked to make a casting mold. PHOTOSCULPTURE was a 19th-century technique to create exact three-dimensional replicas of objects. Most famously Francois Willeme (1860) placed 24 cameras in a circular array and simultaneously photographed an object. The silhouette of each photograph was then used to carve a replica. Morioka (1935, 1944) developed a hybrid photo sculpture and topographic process using structured light to photographically create contour lines of an object. The lines could then be developed into sheets and cut and stacked, or projected onto stock material for carving. The Munz (1956) Process reproduced a three-dimensional image of an object by selectively exposing, layer by layer, a photo emulsion on a lowering piston. After fixing, a solid transparent cylinder contains an image of the object. "The Origins of Rapid Prototyping - RP stems from the ever-growing CAD industry, more specifically, the solid modeling side of CAD. Before solid modeling was introduced in the late 1980's, three-dimensional models were created with wire frames and surfaces. But not until the development of true solid modeling could innovative processes such as RP be developed. Charles Hull, who helped found 3D Systems in 1986, developed the first RP process. This process, called stereolithography, builds objects by curing thin consecutive layers of certain ultraviolet light-sensitive liquid resins with a low-power laser. With the introduction of RP, CAD solid models could suddenly come to life". The technologies referred to as Solid Freeform Fabrication are what we recognize today as rapid prototyping, 3D printing or additive manufacturing: Swainson (1977), Schwerzel (1984) worked on polymerization of a photosensitive polymer at the intersection of two computer controlled laser beams. Ciraud (1972) considered magnetostatic or electrostatic deposition with electron beam, laser or plasma for sintered surface cladding. These were all proposed but it is unknown if working machines were built. Hideo Kodama of Nagoya Municipal Industrial Research Institute was the first to publish an account of a solid model fabricated using a photopolymer rapid prototyping system (1981). The first 3D rapid prototyping system relying on Fused Deposition Modeling (FDM) was made in April 1992 by Stratasys but the patent did not issue until June 9, 1992. Sanders Prototype, Inc introduced the first desktop inkjet 3D Printer (3DP) using an invention from August 4, 1992 (Helinski), Modelmaker 6Pro in late 1993 and then the larger industrial 3D printer, Modelmaker 2, in 1997. Z-Corp using the MIT 3DP powder binding for Direct Shell Casting (DSP) invented 1993 was introduced to the market in 1995. Even at that early date the technology was seen as having a place in manufacturing practice. A low resol
Read more →
Likewise, Inc.

Likewise, Inc., is an American technology startup company which provides a social networking service for finding and saving content recommendations for movies, TV shows, books, and podcasts. A team of ex-Microsoft employees founded Likewise in October 2017 with financial investment from Microsoft co-founder Bill Gates. The company is led by CEO Ian Morris and as of 2020 had a team of about 35 employees. Its headquarters operates in Bellevue, Washington. As of July 2020, 1 million users had joined the platform. == History == === Ideation (October 2017) === In 2017, former Microsoft Communications Chief Larry Cohen came up with the idea for Likewise in Bill Gates’ private office, Gates Ventures. Cohen currently serves as Gates Ventures’ CEO and managing partner. Cohen collaborated with colleagues Michael Dix and Ian Morris to co-found what would become Likewise, with Morris as its CEO. Gates funded the company's early development. The company developed its platform in stealth mode before launching publicly in October 2018. === Release (October 2018) === Likewise officially released its platform in the US and Canada on October 3, 2018. === Growth (2020 COVID-19 pandemic) === Likewise experienced accelerated growth alongside the COVID-19 pandemic. From March 2020 to July 2020, the platform's monthly active users tripled in numbers. The company reached one million users in July 2020. == Applications == === Mobile === Likewise is available as a mobile app for the Android and iOS mobile operating systems. Users receive recommendations from the Likewise algorithm, people they follow, and the Likewise editorial team. === Likewise TV === In October 2019, the company launched its Apple TV app called Likewise TV. The television app organizes shows across streaming services under one watchlist. On July 20, 2020, Likewise TV expanded to Android TV and Amazon Fire TV users.
Read more →
BiP (software)

BiP is a freeware instant messaging application developed by Lifecell Ventures Cooperatief U.A., a subsidiary of Turkcell incorporated in the Netherlands. It allows users to send text messages, voice messages and video calling, and it can be downloaded from the App Store, Google Play, and Huawei AppGallery. BiP has over 53 million users worldwide, and was first released in 2013. == Functions == BiP is a secure, and free communication platform. BiP allows making video and audio calls, allows sharing images, videos and location. BiP includes instant translations to 106 languages and exchange rates. President Erdoğan's Communications Office opposed WhatsApp's enforcement of its updated privacy policy and announced that Erdoğan left WhatsApp and opened an account in Telegram and BiP. The Turkish Ministry of National Defense has announced that it will move information groups to BiP for the same reason. == Others == Banglalink announced a BiP messenger partnership in Bangladesh The Communications Office of President Erdoğan opposed WhatsApp's enforcement of its updated privacy policy and announced that Erdoğan left WhatsApp and opened an account in Telegram and BiP. The Turkish Ministry of National Defense has announced that it will move information groups to BiP for the same reason. The CEO of BiP is Burak Akinci. The number of downloads of the app is 80 million globally.
Read more →
Clubdjpro

ClubDJPro (often referred to as ClubDJ) is a DJ console and video mixing tool developed by Cube Software Solutions Inc. software. It was released in June 2005. == User interface == ClubDJPro has a GUI that was designed to allow aesthetic revisions via Skins. The skin engine that ClubDJPro uses allows for the ability to expand the software to take up the entire screen. As of 4.4.3.3 there are 3 user changeable skins included in the program which are changeable in the preferences tab. They are called 'AquaLung', 'Eleanor', and 'Grabber'. == Editions == ClubDJPro is available in two different editions, with separate features depending upon their target consumer group. DJ Edition - Can play audio files only. VJ Edition - Contains all of the features of the DJ Edition, in addition to support for video, karaoke, and visualizations. == Supported MIDI Controllers == Supported since version 2.0: Hercules Console Hercules Console MK2 Hercules Control MP3 PCDJ DAC-2 Controller == History == The initial "final release" of ClubDJPro was released on June 24, 2005. On June 26, 2009, the 4th iteration of the ClubDJPro software was released. The development of the software and website appears to have halted. As of March 2018 the website continues to show a new version "Coming Spring 2016".
Read more →