AI Email Reply Free

AI Email Reply Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Site Security Handbook

The Site Security Handbook, RFC 2196, is a guide on setting computer security policies and procedures for sites that have systems on the Internet (however, the information provided should also be useful to sites not yet connected to the Internet). The guide lists issues and factors that a site must consider when setting their own policies. It makes a number of recommendations and provides discussions of relevant areas. This guide is only a framework for setting security policies and procedures. In order to have an effective set of policies and procedures, a site will have to make many decisions, gain agreement, and then communicate and implement these policies. The guide is a product of the IETF SSH working group, and was published in 1997, obsoleting the earlier RFC 1244 from 1991.
Read more →
Workplace robotics safety

Workplace robotics safety is an aspect of occupational safety and health when robots are used in the workplace. This includes traditional industrial robots as well as emerging technologies such as drone aircraft and wearable robotic exoskeletons. Types of accidents include collisions, crushing, and injuries from mechanical parts. Hazard controls include physical barriers, good work practices, and proper maintenance. == Background == Many workplace robots are industrial robots used in manufacturing. According to the International Federation of Robotics, 1.7 million new robots are expected to be used in factories between 2017 and 2020. Emerging robot technologies include collaborative robots, personal care robots, construction robots, exoskeletons, autonomous vehicles, and drone aircraft (also known as unmanned aerial vehicles or UAVs). Advances in automation technologies (e.g. fixed robots, collaborative and mobile robots, and exoskeletons) have the potential to improve work conditions but also to introduce workplace hazards in manufacturing workplaces. Fifty-six percent of robot injuries are classified as pinch injuries and 44% of injuries are classified as impact injuries. A 1987 study found that line workers are at the greatest risk, followed by maintenance workers, and programmers. Poor workplace design and human error caused most injuries. Despite the lack of occupational surveillance data on injuries associated specifically with robots, researchers from the US National Institute for Occupational Safety and Health (NIOSH) identified 61 robot-related deaths between 1992 and 2015 using keyword searches of the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries research database (see info from Center for Occupational Robotics Research). Using data from the Bureau of Labor Statistics, NIOSH and its state partners have investigated 4 robot-related fatalities under the Fatality Assessment and Control Evaluation Program. In addition the Occupational Safety and Health Administration (OSHA) has investigated robot-related deaths and injuries, which can be reviewed at OSHA Accident Search page. Injuries and fatalities could increase over time because of the increasing number of collaborative and co-existing robots, powered exoskeletons, and autonomous vehicles into the work environment. Safety standards are being developed by the Robotic Industries Association (RIA) in conjunction with the American National Standards Institute (ANSI). On October 5, 2017, OSHA, NIOSH and RIA signed an alliance to work together to enhance technical expertise, identify and help address potential workplace hazards associated with traditional industrial robots and the emerging technology of human-robot collaboration installations and systems, and help identify needed research to reduce workplace hazards. On October 16 NIOSH launched the Center for Occupational Robotics Research to "provide scientific leadership to guide the development and use of occupational robots that enhance worker safety, health, and well being". So far, the research needs identified by NIOSH and its partners include: tracking and preventing injuries and fatalities, intervention and dissemination strategies to promote safe machine control and maintenance procedures, and on translating effective evidence-based interventions into workplace practice. == Hazards == Many hazards and injuries can result from the use of robots in the workplace. Some robots, notably those in a traditional industrial environment, are fast and powerful. This increases the potential for injury as one swing from a robotic arm, for example, could cause serious bodily harm. There are additional risks when a robot malfunctions or is in need of maintenance. A worker who is working on the robot may be injured because a malfunctioning robot is typically unpredictable. For example, a robotic arm that is part of a car assembly line may experience a jammed motor. A worker who is working to fix the jam may suddenly get hit by the arm the moment it becomes unjammed. Additionally, if a worker is standing in a zone that is overlapping with nearby robotic arms, he or she may get injured by other moving equipment. There are four types of accidents that can occur with robots: impact or collision accidents, crushing and trapping accidents, mechanical part accidents, and other accidents. Impact or collision accidents occur generally from malfunctions and unpredicted changes. Crushing and trapping accidents occur when a part of a worker's body becomes trapped or caught on robotic equipment. Mechanical part accidents can occur when a robot malfunctions and starts to "break down", where the ejection of parts or exposed wire can cause serious injury. Other accidents at just general accidents that occur from working with robots. There are seven sources of hazards that are associated with human interaction with robots and machines: human errors, control errors, unauthorized access, mechanical failures, environmental sources, power systems, and improper installation. Human errors could be anything from one line of incorrect code to a loose bolt on a robotic arm. Many hazards can stem from human-based error. Control errors are intrinsic and are usually not controllable nor predictable. Unauthorized access hazards occur when a person who is not familiar with the area enters the domain of a robot. Mechanical failures can happen at any time, and a faulty unit is usually unpredictable. Environmental sources are things such as electromagnetic or radio interference in the environment that can cause a robot to malfunction. Power systems are pneumatic, hydraulic, or electrical power sources; these power sources can malfunction and cause fires, leaks, or electrical shocks. Improper installation is fairly self-explanatory; a loose bolt or an exposed wire can lead to inherent hazards. === Emerging technologies === Emerging robotic technologies can reduce hazards to workers, but can also introduce new hazards. For example, robotic exoskeletons can be used in construction to reduce load to the spine, improve posture, and reduce fatigue; however, they can also increase chest pressure, limit mobility when moving out of the way of a falling object, and cause balance problems. Unmanned aerial vehicles are being used in the construction industry to do monitoring and inspections of buildings under construction. This reduces the need for humans to be in hazardous locations, but the risk of a UAV collision presents a hazard to workers. For collaborative robots, isolation is not possible. Possible hazard controls include collision avoidance systems, and making the robot less stiff to lessen the impact force. Robotic tech vest is a wearable device for humans, worn in Amazon warehouses. == Hazard controls == There are a few ways to prevent injuries by implementing hazard controls. There can be risk assessments at each of the various stages of a robot's development. Risk assessments can help gather information about a robot's status, how well it is being maintained, and if repairs are needed soon. By being aware of the status of a robot, injuries can be prevented and hazards reduced. Safeguarding devices can be implemented to reduce the risk of injuries. These can include engineering controls such as physical barriers, guard rails, presence-sensing safeguarding devices, etc. Awareness devices are usually used in conjunction with safeguarding devices. They are usually a system of rope or chain barriers with lights, signs, whistles, and horns. Their purpose it to be able to alert workers or personnel of certain dangers. Operator safeguards can also be in place. These usually utilize safeguarding devices to protect the operator and reduce risk of injury. Additionally, when an operator is within close proximity of a robot, the working speed of the robot can be reduced to ensure that the operator is in full control. This can be done by placing the robot in the manual or teach mode. It is also crucial to inform the programmer of the robot of what type of work the robot will be doing, how it will interact with other robots, and how it will work in relation to an operator. Proper maintenance of robotic equipment is also critical in order to reduce hazards. Maintaining a robot insures that it continues to function properly, thereby reducing the risks associated with a malfunction. One common safeguard used in industrial settings is the installation of robot safety fencing. These barriers, often made from durable materials such as mesh or polycarbonate, prevent accidental interactions between workers and robotic systems, reducing the risk of injury. Robot safety fencing is particularly important in environments where high-speed or powerful robots are used. == Regulations == Some existing regulations regarding robots and robotic systems include: ANSI/RIA R15.06 OSHA 29 CFR 1910.333 OSHA 29 CFR 1910.147 ISO 10218 ISO/TS 15066 ISO/DIS 13482
Read more →
Amira (software)

Amira (ah-MEER-ah) is a software platform for visualization, processing, and analysis of 3D and 4D data. It is being actively developed by Thermo Fisher Scientific in collaboration with the Zuse Institute Berlin (ZIB), and commercially distributed by Thermo Fisher Scientific — together with its sister software Avizo. == Overview == Amira is an extendable software system for scientific visualization, data analysis, and presentation of 3D and 4D data. It is used by researchers and engineers in academia and industry. It is a tool for processing, analysis and visualization of data from various modalities; e.g. micro-CT, PET, Ultrasound. It is used in many fields, such as microscopy in biology and materials science, molecular biology, quantum physics, astrophysics, computational fluid dynamics (CFD), finite element modeling (FEM), non-destructive testing (NDT), and many more. One of the key features, besides data visualization, is Amira's set of tools for image segmentation and geometry reconstruction. This allows the user to mark (or segment) structures and regions of interest in 3D image volumes using automatic, semi-automatic, and manual tools. The segmentation can then be used for a variety of subsequent tasks, such as volumetric analysis, density analysis, shape analysis, or the generation of 3D computer models for visualization, numerical simulations, or rapid prototyping or 3D printing. Other key Amira features are multi-planar and volume visualization, image registration, filament tracing, cell separation and analysis, tetrahedral mesh generation, fiber-tracking from diffusion tensor imaging (DTI) data, skeletonization, spatial graph analysis, and stereoscopic rendering of 3D data over multiple displays and immersive virtual reality environments, including CAVEs. As a commercial product Amira requires the purchase of a license or an academic subscription. A time-limited, but full-featured evaluation version is available for download free of charge. == History == === 1993–1998: Research software === Amira's roots go back to 1993 and the Department for Scientific Visualization, headed by Hans-Christian Hege at the Zuse Institute Berlin (ZIB). The ZIB is a research institute for mathematics and informatics. The Scientific Visualization department's mission is to help solve computationally and scientifically challenging tasks in medicine, biology, engineering and materials science. For this purpose, it develops algorithms and software for 2D, 3D, and 4D data visualization and visually supported exploration and analysis. At that time, the young visualization group at the ZIB had experience with the extendable, data flow-oriented visualization environments apE, IRIS Explorer, and Advanced Visualization Studio (AVS), but was not satisfied with these products' interactivity, flexibility, and ease-of-use for non-computer scientists. Therefore, the development of a new software system was started in a research project within a medically oriented, multi-disciplinary collaborative research center. Based on experiences that Tobias Höllerer had gained in late 1993 with the new graphics library IRIS Inventor, it was decided to utilize that library. The development of the medical planning system was performed by Detlev Stalling, who later became the chief software architect of Amira. The new software was called "HyperPlan", highlighting its initial target application – a planning system for hyperthermia cancer treatment. The system was being developed on Silicon Graphics (SGI) computers, which at the time were the standard workstations used for high-end graphics computing. The software was based on libraries such as OpenGL (originally IRIS GL), Open Inventor (originally IRIS Inventor), and the graphical user interface libraries X11, Motif (software), and ViewKit. In 1998, X11/Motif/Viewkit were replaced by the Qt toolkit. The HyperPlan framework served as the base for more and more projects at the ZIB and was used by a growing number of researchers in collaborating institutions. The projects included applications in medical image computing, medical visualization, neurobiology, confocal microscopy, flow visualization, molecular analytics and computational astrophysics. === 1998–today: Commercially supported product === The growing number of users of the system started to exceed the capacities that ZIB could spare for software distribution and support, as ZIB's primary mission was algorithmic research. Therefore, the spin-off company Indeed – Visual Concepts GmbH was founded by Hans-Christian Hege, Detlev Stalling, and Malte Westerhoff. In Feb 1998 the HyperPlan software was given the new, application-neutral name "Amira". This name is not an acronym, but was chosen for being pronounceable in different languages and providing a suitable connotation, namely "to look at" or "to wonder at", from the Latin verb "admirare" (to admire), which reflects a basic situation in data visualization. A major re-design of the software was undertaken by Detlev Stalling and Malte Westerhoff in order to make it a commercially supportable product and to make it available on non-SGI computers as well. In March 1999, the first version of the commercial Amira was exhibited at the CeBIT tradeshow in Hannover, Germany on SGI IRIX and Hewlett-Packard UniX (HP-UX) booths. Versions for Linux and Microsoft Windows followed within the following twelve months. Later Mac OS X support was added. Indeed – Visual Concepts GmbH selected the Bordeaux, France and San Diego, United States based company TGS, Inc. as the worldwide distributor for Amira and completed five major releases (up to version 3.1) in the subsequent four years. In 2003 both Indeed – Visual Concepts GmbH, as well as TGS, Inc. were acquired by Massachusetts-based Mercury Computer Systems, Inc. (NASDAQ:MRCY) and became part of Mercury's newly formed life sciences business unit, later branded Visage Imaging. In 2009, Mercury Computer Systems, Inc. spun off Visage Imaging again and sold it to Melbourne, Australia based Promedicus Ltd (ASX:PME), a leading provider of radiology information systems and medical IT solutions. During this time, Amira continued to be developed in Berlin, Germany and in close collaboration with the ZIB, still headed by the original creators of Amira. TGS, located in Bordeaux, France was sold by Mercury Computer systems to a French investor and renamed to Visualization Sciences Group (VSG). VSG continued the work on a complementary product named Avizo, based on the same source code but customized for material sciences. In August 2012, FEI, to that date the largest OEM reseller of Amira, purchased VSG and the Amira business from Promedicus. This brought the two software sisters Amira and Avizo back into one hand. In August 2013, Visualization Sciences Group (VSG) became a business unit of FEI. In 2016 FEI has been bought by Thermo Fisher Scientific and became part of its Materials & Structural Analysis division in early 2017. Amira and Avizo are still being marketed as two different products; Amira for life sciences and Avizo for materials science, but the development efforts are now joined once again. In the meantime, the number of scientific articles using the Amira / Avizo software, is in the order of 10 thousands. == Amira options == === Microscopy option === Specific readers for microscopy data Image deconvolution Exploration of 3D imagery obtained from virtually any microscope Extraction and editing of filament networks from microscopy images === DICOM reader === Import of clinical and preclinical data in DICOM format === Mesh option === Generation of 3D finite element (FE) meshes from segmented image data Support for many state-of-the-art FE solver formats High-quality visualization of simulation mesh-based results, using scalar, vector, and tensor field display modules === Skeletonization option === Reconstruction and analysis of neural and vascular networks Visualization of skeletonized networks Length and diameter quantification of network segments Ordering of segments in a tree graph Skeletonization of very large image stacks === Molecular option === Advanced tools for the visualization of molecule models Hardware-accelerated volume rendering Powerful molecule editor Specific tools for complex molecular visualization === Developer option === Creation of new custom components for visualizing or data processing Implementation of new file readers or writers C++ programming language Development wizard for getting started quickly === Neuro option === Medical image analysis for DTI and brain perfusion Fiber tracking supporting several stream-line based algorithms Fiber separation into fiber bundles based on user defined source and destination regions Computation of tensor fields, diffusion weighted maps Eigenvalue decomposition of tensor fields Computation of mean transit time, cerebral blood flow, and cerebral blood volume === VR option === Visualization of data on large tiled displays
Read more →
Image subtraction

Image subtraction or pixel subtraction or difference imaging is an image processing technique whereby the digital numeric value of one pixel or whole image is subtracted from another image, and a new image generated from the result. This is primarily done for one of two reasons – levelling uneven sections of an image such as half an image having a shadow on it, or detecting changes between two images. This method can show things in the image that have changed position, brightness, color, or shape. For this technique to work, the two images must first be spatially aligned to match features between them, and their photometric values and point spread functions must be made compatible, either by careful calibration, or by post-processing (using color mapping). The complexity of the pre-processing needed before differencing varies with the type of image, but is essential to ensure good subtraction of static features. This is commonly used in fields such as time-domain astronomy (known primarily as difference imaging) to find objects that fluctuate in brightness or move. In automated searches for asteroids or Kuiper belt objects, the target moves and will be in one place in one image, and in another place in a reference image made an hour or day later. Thus, image processing algorithms can make the fixed stars in the background disappear, leaving only the target. Distinct families of astronomical image subtraction techniques have emerged, operating in both image space or frequency space, with distinct trade-offs in both quality of subtraction and computational cost. These algorithms lie at the heart of almost all modern (and upcoming) transient surveys, and can enable the detection of even faint supernovae embedded in bright galaxies. Nevertheless, in astronomical imaging, significant 'residuals' remain around bright, complex sources, necessitating further algorithmic steps to identify candidates (known as real-bogus classification) The Hutchinson metric can be used to "measure of the discrepancy between two images for use in fractal image processing".
Read more →
News analytics

In trading strategy, news analysis refers to the measurement of the various qualitative and quantitative attributes of textual (unstructured data) news stories. Some of these attributes are: sentiment, relevance, and novelty. Expressing news stories as numbers and metadata permits the manipulation of everyday information in a mathematical and statistical way. This data is often used in financial markets as part of a trading strategy or by businesses to judge market sentiment and make better business decisions. News analytics are usually derived through automated text analysis and applied to digital texts using elements from natural language processing and machine learning such as latent semantic analysis, support vector machines, "bag of words" among other techniques. == Applications and strategies == The application of sophisticated linguistic analysis to news and social media has grown from an area of research to mature product solutions since 2007. News analytics and news sentiment calculations are now routinely used by both buy-side and sell-side in alpha generation, trading execution, risk management, and market surveillance and compliance. There is however a good deal of variation in the quality, effectiveness and completeness of currently available solutions. A large number of companies use news analysis to help them make better business decisions. Academic researchers have become interested in news analysis especially with regards to predicting stock price movements, volatility and traded volume. Provided a set of values such as sentiment and relevance as well as the frequency of news arrivals, it is possible to construct news sentiment scores for multiple asset classes such as equities, Forex, fixed income, and commodities. Sentiment scores can be constructed at various horizons to meet the different needs and objectives of high and low frequency trading strategies, whilst characteristics such as direction and volatility of asset returns as well as the traded volume may be addressed more directly via the construction of tailor-made sentiment scores. Scores are generally constructed as a range of values. For instance, values may range between 0 and 100, where values above and below 50 convey positive and negative sentiment, respectively. === Absolute return strategies === The objective of absolute return strategies is absolute (positive) returns regardless of the direction of the financial market. To meet this objective, such strategies typically involve opportunistic long and short positions in selected instruments with zero or limited market exposure. In statistical terms, absolute return strategies should have very low correlation with the market return. Typically, hedge funds tend to employ absolute return strategies. Below, a few examples show how news analysis can be applied in the absolute return strategy space with the purpose to identify alpha opportunities applying a market neutral strategy or based on volatility trading. Example 1 Scenario: The gap between the news sentiment scores for direction, S {\displaystyle S} , of Company X {\displaystyle X} and Market Y {\displaystyle Y} has moved beyond + 20 {\displaystyle +20} . That is, S X − S Y {\displaystyle S_{X}-S_{Y}} ≥ 20 {\displaystyle 20} . Action: Buy the stock on Company X {\displaystyle X} and short the future on Market Y {\displaystyle Y} . Exit Strategy: When the gap in the news sentiment scores for direction of Company X {\displaystyle X} and Market Y {\displaystyle Y} has disappeared, S X − S Y {\displaystyle S_{X}-S_{Y}} = 0 {\displaystyle 0} , sell the stock on Company X {\displaystyle X} and go long the future on Market Y {\displaystyle Y} to close the positions. Example 2 Scenario: The news sentiment score for volatility of Company X {\displaystyle X} goes above 70 {\displaystyle 70} out of 100 {\displaystyle 100} indicating an expected volatility above the option implied volatility. Action: Buy a short-dated straddle (the purchase of both a put and a call) on the stock of Company X {\displaystyle X} . Exit Strategy: Keep the straddle on Company X {\displaystyle X} until expiry or until a certain profit target has been reached. === Relative return strategies === The objective of relative return strategies is to either replicate (passive management) or outperform (active management) a theoretical passive reference portfolio or benchmark. To meet these objectives such strategies typically involve long positions in selected instruments. In statistical terms, relative return strategies often have high correlation with the market return. Typically, mutual funds tend to employ relative return strategies. Below, a few examples show how news analysis can be applied in the relative return strategy space with the purpose to outperform the market applying a stock picking strategy and by making tactical tilts to ones asset allocation model. Example 1 Scenario: The news sentiment score for direction of Company X {\displaystyle X} goes above 70 {\displaystyle 70} out of 100 {\displaystyle 100} . Action: Buy the stock on Company X {\displaystyle X} . Exit Strategy: When the news sentiment score for direction of Company X {\displaystyle X} falls below 60 {\displaystyle 60} , sell the stock on Company X {\displaystyle X} to close the position. Example 2 Scenario: The news sentiment score for direction of Sector Z {\displaystyle Z} goes above 70 {\displaystyle 70} out of 100 {\displaystyle 100} . Action: Include Sector Z {\displaystyle Z} as a tactical bet in the asset allocation model. Exit Strategy: When the news sentiment score for direction of Sector Z {\displaystyle Z} falls below 60 {\displaystyle 60} , remove the tactical bet for Sector Z {\displaystyle Z} from the asset allocation model. === Financial risk management === The objective of financial risk management is to create economic value in a firm or to maintain a certain risk profile of an investment portfolio by using financial instruments to manage risk exposures, particularly credit risk and market risk. Other types include Foreign exchange, Shape, Volatility, Sector, Liquidity, Inflation risks, etc. Below, a few examples show how news analysis can be applied in the financial risk management space with the purpose to either arrive at better risk estimates in terms of Value at Risk (VaR) or to manage the risk of a portfolio to meet ones portfolio mandate. Example 1 Scenario: The bank operates a VaR model to manage the overall market risk of its portfolio. Action: Estimate the portfolio covariance matrix taking into account the development of the news sentiment score for volume. Implement the relevant hedges to bring the VaR of the bank in line with the desired levels. Example 2 Scenario: A portfolio manager operates his portfolio towards a certain desired risk profile. Action: Estimate the portfolio covariance matrix taking into account the development of the news sentiment score for volume. Scale the portfolio exposure according to the targeted risk profile. === Computer algorithms using news analytics === Within 0.33 seconds, computer algorithms using news analytics can notify subscribers which company the news is about, if the news article sentiment is positive or negative, if the news is ranked as high or low relative importance … relative relevance. the stock price reaction and the increase in trade volume is concentrated in the first 5 seconds after an news article is released. === Algorithmic order execution === The objective of algorithmic order execution, which is part of the concept of algorithmic trading, is to reduce trading costs by optimizing on the timing of a given order. It is widely used by hedge funds, pension funds, mutual funds, and other institutional traders to divide up large trades into several smaller trades to manage market impact, opportunity cost, and risk more effectively. The example below shows how news analysis can be applied in the algorithmic order execution space with the purpose to arrive at more efficient algorithmic trading systems. Example 1 Scenario: A large order needs to be placed in the market for the stock on Company X {\displaystyle X} . Action: Scale the daily volume distribution for Company X {\displaystyle X} applied in the algorithmic trading system, thus taking into account the news sentiment score for volume. This is followed by the creation of the desired trading distribution forcing greater market participation during the periods of the day when volume is expected to be heaviest. == Effects == Being able to express news stories as numbers permits the manipulation of everyday information in a statistical way that allows computers not only to make decisions once made only by humans, but to do so more efficiently. Since market participants are always looking for an edge, the speed of computer connections and the delivery of news analysis, measured in milliseconds, have become essential.
Read more →
Harmony (software)

Harmony is a Java-based software for creating high-definition music videos with 2D and 3D animations. The application was developed by Digital Chaotics, a company based in San Jose, California and established in 2010 by Ken and Leanna Scott. == History == During a March 1, 2011 interview published by The LIST magazine, Ken explained how he initially got into music and digital entertainment. According to Scott: “I came at it from both the art and the technology side. … I built one of the first digital audio synthesizers as an undergrad project back in 1979. It was a short jump from there to creating visuals with computers, too.” Taking inspiration from Fantasia – which Scott calls, “The greatest music video of all time” – he began writing software code for Harmony in late 2009, finishing the project in mid-2010. However, Scott has also said that the idea for Harmony began much earlier: I read a book in 1978 called Digital Harmony, by John H Whitney, Sr. (Interestingly, he was the father of the president of Digital Productions.) He said that there was a kind of visual art based on motion, and proposed theories about the underlying mathematical structure of visual harmony. So there's the book, combined with my desire to create art with computers-add a taste or two of things commonly used by college students during the 70's - and lots of Pink Floyd. Add it all up, and the seeds for Harmony were planted. My friends in school and at Floating Point Systems listened to me ranting about "making music videos with computers" incessantly. I'm sure it was both maddening and fascinating to see. == Features == Harmony runs on Windows 7 and Windows Vista. Currently, Digital Chaotics does not offer a macOS or Linux platform for the software. However, Harmony can be run on these platforms by running it on Windows in a virtual machine. == Harmony 2 == On November 1, 2011, Digital Chaotics released the 2.0 version of the Harmony software. Unlike the original version, the second release featured three product levels: Harmony 2 Express, Harmony 2 Pro, and Harmony 2 Extreme. The "Express" version was positioned as an entry-level, free release to allow users a chance to "test-drive" the software. The "Pro" version currently retails at $197, while the "Extreme" is priced at $397. These two versions, aimed more towards VJ and Fulldome theater usage, featured additional software capability and features such as higher resolution, more video formatting options, and more camera angles.
Read more →
Creately

Creately is a SaaS visual collaboration tool with diagramming and design capabilities designed by Cinergix. The application is mostly known for creating flowcharts, organization charts, project charts, UML diagrams, mind maps, and other business visuals. == History == The initial beta version of Creately was released by Chandika Jayasundara. Hiraash Thawfeek, Nick Foster and Charanjit Singh joined the project in the same year. Chandika Jayasundara is CEO of Cinergix. The headquarters of the company is located at Mentone, Victoria, Australia. == Features and reception == Creately provides predefined templates and diagram elements for incorporating in the projects. It provides drag and drop feature with which both predefined and custom made shapes can be included to build the desired diagram while the same workspace can be shared with multiple persons for collaboration. Some experts have reviewed the application by commenting on its lacking in accessible integration options as its downside. The company claims Creately to have integration feature with Slack, Confluence while not having the integration with Zapier and OneDrive yet. It is compatible with Google Drive and Dropbox. The software is available as both freemium and paid option.
Read more →
Subvocal recognition

Subvocal recognition (SVR) is the process of taking subvocalization and converting the detected results to a digital output, aural or text-based. A silent speech interface is a device that allows speech communication without using the sound made when people vocalize their speech sounds. It works by the computer identifying the phonemes that an individual pronounces from nonauditory sources of information about their speech movements. These are then used to recreate the speech using speech synthesis. == Input methods == Silent speech interface systems have been created using ultrasound and optical camera input of tongue and lip movements. Electromagnetic devices are another technique for tracking tongue and lip movements. The detection of speech movements by electromyography of speech articulator muscles and the larynx is another technique. Another source of information is the vocal tract resonance signals that get transmitted through bone conduction called non-audible murmurs. They have also been created as a brain–computer interface using brain activity in the motor cortex obtained from intracortical microelectrodes. == Uses == Such devices are created as aids to those unable to create the sound phonation needed for audible speech such as after laryngectomies. Another use is for communication when speech is masked by background noise or distorted by self-contained breathing apparatus. A further practical use is where a need exists for silent communication, such as when privacy is required in a public place, or hands-free data silent transmission is needed during a military or security operation. In 2002, the Japanese company NTT DoCoMo announced it had created a silent mobile phone using electromyography and imaging of lip movement. The company stated that "the spur to developing such a phone was ridding public places of noise," adding that, "the technology is also expected to help people who have permanently lost their voice." The feasibility of using silent speech interfaces for practical communication has since then been shown. In 2019, Arnav Kapur, a researcher from the Massachusetts Institute of Technology, conducted a study known as AlterEgo. Its implementation of the silent speech interface enables direct communication between the human brain and external devices through stimulation of the speech muscles. By leveraging neural signals associated with speech and language, the AlterEgo system deciphers the user's intended words and translates them into text or commands without the need for audible speech. == Research and patents == With a grant from the U.S. Army, research into synthetic telepathy using subvocalization is taking place at the University of California, Irvine under lead scientist Mike D'Zmura. NASA's Ames Research Laboratory in Mountain View, California, under the supervision of Charles Jorgensen is conducting subvocalization research. The Brain Computer Interface R&D program at Wadsworth Center under the New York State Department of Health has confirmed the existing ability to decipher consonants and vowels from imagined speech, which allows for brain-based communication using imagined speech, however using EEGs instead of subvocalization techniques. US Patents on silent communication technologies include: US Patent 6587729 "Apparatus for audibly communicating speech using the radio frequency hearing effect", US Patent 5159703 "Silent subliminal presentation system", US Patent 6011991 "Communication system and method including brain wave analysis and/or use of brain activity", US Patent 3951134 "Apparatus and method for remotely monitoring and altering brain waves". Latter two rely on brain wave analysis. == In fiction == The decoding of silent speech using a computer played an important role in Arthur C. Clarke's story and Stanley Kubrick's associated film A Space Odyssey. In this, HAL 9000, a computer controlling spaceship Discovery One, bound for Jupiter, discovers a plot to deactivate it by the mission astronauts Dave Bowman and Frank Poole through lip reading their conversations. In Orson Scott Card's series (including Ender's Game), the artificial intelligence can be spoken to while the protagonist wears a movement sensor in his jaw, enabling him to converse with the AI without making noise. He also wears an ear implant. In Speaker for the Dead and subsequent novels, author Orson Scott Card described an ear implant, called a "jewel", that allows subvocal communication with computer systems. Author Robert J. Sawyer made use of subvocal recognition to allow silent commands to the cybernetic 'companion implants' used by the advanced Neanderthal characters in his Neanderthal Parallax trilogy of science fiction novels. In Earth, David Brin depicts this technology and its uses as a normal gear in the near future. In Down and Out in the Magic Kingdom, Cory Doctorow has cellphone technology become silent through a cochlear implant and miking the throat to pick up subvocalization. William Gibson's Sprawl Trilogy frequently uses sub-vocalization systems in various devices. In Kage Baker's Company novels, the immortal cyborgs communicate subvocally. In the Hugo Award-winning Hyperion Cantos by Dan Simmons, the characters often use subvocalization to communicate. In the Culture novels by Iain M. Banks, more highly advanced species often communicate subvocally through their technology. In Deus Ex: Human Revolution (2011), the protagonist is augmented with a subvocalization implant for sending covert communications (and a corresponding cochlear implant for receiving covert communications). In the tabletop RPG and video game series Shadowrun, player characters can communicate via subvocal microphones in some instances. In Paranoia, all citizens can speak to the computer via their "cerebral cortech" implants. Alistair Reynolds Revelation Space trilogy frequently uses sub-vocalization systems in various devices.
Read more →
Linux color management

Linux color management has the same goal as the color management systems (CMS) for other operating systems, which is to achieve the best possible color reproduction throughout an imaging workflow from its source (camera, video, scanner, etc.), through imaging software (Digikam, darktable, RawTherapee, GIMP, Krita, Scribus, etc.), and finally onto an output medium (monitor, video projector, printer, etc.). In particular, color management attempts to enable color consistency across media and throughout a color-managed workflow. Linux color management relies on the use of accurate ICC (International Color Consortium) and DCP (DNG Color Profile) profiles describing the behavior of input and output devices, and color-managed applications that are aware of these profiles. These applications perform gamut conversions between device profiles and color spaces. Gamut conversions, based on accurate device profiles, are the essence of color management. Historically, color management was not an initial design consideration of the X Window System on which much of Linux graphics support rests, and thus color-managed workflows have been somewhat more challenging to implement on Linux than on other OS's such as Microsoft Windows or macOS. This situation is now being progressively remedied, and color management under Linux, while functional, has not yet acquired mature status. Although it is now possible to obtain a consistent color-managed workflow under Linux, certain problems still remain: The absence of a central user control panel for color settings. Some hardware devices for color calibration lack Linux drivers, firmware or accessory data. Since ICC color profiles are written to an open specification, they are compatible across operating systems. Hence, a profile produced on one OS should work on any other OS given the availability of the necessary software to read it and perform the gamut conversions. This can be used as a workaround for the lack of support for certain spectrophotometers or colorimeters under Linux: one can simply produce a profile on a different OS and then use it in a Linux workflow. Additionally, certain hardware, such as most printers and certain monitors, can be calibrated under another OS and then used in a fully color-managed workflow on Linux. The popular Ubuntu Linux distribution added initial color management in the 11.10 release (the "Oneiric Ocelot" release). == Requirements for a color-managed workflow == Accurate device profiles obtained with source or output characterization software. Correctly loaded video card lookup tables (LUTs) (or monitor profiles that do not require LUT adjustments). Color-managed applications that are configured to use a correct monitor profile and input/output profiles, with support for control over the rendering intent and black point compensation. Calibration and profiling requires: for input devices (scanner, camera, etc.) a color target which the profiling software will compare to the manufacturer-provided color values of the target. or for output devices (monitor, printer, etc.) a reading with a specific device (spectrophotometer, colorimeter or spectrocolorimeter) of the color patch values and comparing the measured values against the values originally sent for output. === Monitor calibration and profiling === One of the critical elements in any color-managed workflow is the monitor, because, at one step or another, handling and making color adaptation through imaging software is required for most images, thus the ability of the monitor to present accurate colors is crucial. Monitor color management consists of calibration and profiling. The first step, calibration, is done by adjusting the monitor controls and the output of the graphics card (via calibration curves) to match user-definable characteristics, such as brightness, white point and gamma. The calibration settings are stored in a .cal file. The second step, profiling (characterization), involves measuring the calibrated display's response and recording it in a color profile. The profile is stored in an .icc file ("ICC file"). For convenience, the calibration settings are usually stored together with the profile in the ICC file. Note that .icm files are identical to .icc files - the difference is only in the name. Seeing correct colors requires using a monitor profile-aware application, together with the same calibration used when profiling the monitor. Calibration alone does not yield accurate colors. If a monitor was calibrated before it was profiled, the profile will only yield correct colors when used on the monitor with the same calibration (the same monitor control adjustments and the same calibration curves loaded into the video card's lookup table). macOS has built-in support for loading calibration curves and installing a system-wide color profile. Windows 7 onward allows loading calibration curves, though this functionality must be enabled manually. Linux and older versions of Windows require using a standalone LUT loader. === Device profiles === ICC profiles are cross-platform and can thus be created on other operating systems and used under Linux. Monitor profiles, however, require some additional attention. Since a monitor profile depends both on the monitor itself and on the video card, a monitor profile should only be used with the same monitor and video card with which it was created. The monitor settings should not be adjusted after creating the profile. In addition, since most calibration software use LUT adjustments during calibration, the corresponding LUTs must be loaded every time the display server (X11, Wayland) is started (e.g. with every graphical login). In the unlikely case of a colorimeter being unsupported by Linux, a profile created under Windows or macOS can be used under Linux. === Display-channel lookup tables === There are two approaches to loading display channel LUTs: Create a profile that does not modify video card LUTs and thus does not require LUTs be loaded later on. Ideally, this approach would rely on DDC-capable monitors—the internal monitor settings of which are set via calibration software. Unfortunately, monitors capable of making these adjustments through DDC are not common and are generally expensive. There is only one calibration software on Linux that can interact with a DDC monitor. For mainstream monitors, a couple of options exist: BasICColor software, which works with most colorimeters on the market, allows one to adjust display output via the monitor interface, and then to choose a "Profile, do not calibrate" option. By doing this, one can create a profile that does not require video card LUT adjustments. For EyeOne devices, EyeOne Match allows the user to calibrate to "Native" gamma and white point targets, which results in the LUT adjustment curves displayed after the calibration as a simple, linear 1:1 mapping (a straight line from corner to corner). Both BasICColor and EyeOne Match do not presently run under Linux but they are capable of creating a profile that does not require LUT adjustments. Use an LUT loader to actually load the LUT adjustments contained within the profile prepared during calibration. According to the documentation, these loaders do not modify the video card LUT by itself, but achieve the same type of adjustment by modifying the X server gamma ramp. Loaders are available for Linux distributions that use X.org or XFree86—the two most popular X servers on Linux. Other X servers are not guaranteed to work with the currently available loaders. There are two LUT loaders available for Linux: Xcalib is one such loader, and although it is a command-line utility, it is quite easy to use. dispwin is a part of Argyll CMS. If, for any reason, the LUT cannot be loaded, it is still recommended to go through the initial stages of calibration where a user is asked by calibration software to make some manual adjustments to the monitor, as this will often improve display linearity and also provide information on its color temperature. This is especially recommended for CRT monitors. === Color-managed applications === In ICC-aware applications, it is important to make sure the correct profiles are assigned to devices, mainly to the monitor and the printer. Some Linux applications can auto-detect the monitor profile, while others requires that it is specified manually. Although there is no designated place to store device profiles on Linux, /usr/share/color/icc/ has become the de facto standard. Most applications running under WINE have not been fully tested for color accuracy. While 8-bpp programs can have some color resolution difficulties due to depth conversion errors, colors in higher-depth applications should be accurate, as long as those programs perform their gamut conversions based on the same monitor profile as that used for loading the LUT, granted that the corresponding LUT adjustments are loaded. == List of color-managed applications == darktabl
Read more →
Nona-binning

Nona-binning is a pixel binning technique used in high-resolution image sensors, primarily in smartphone cameras. The method is based on merging groups of nine neighbouring pixels arranged in a 3×3 pattern. This configuration allows a sensor with very small individual pixels to increase its effective light sensitivity when operating in low-light conditions, while still maintaining high nominal resolution in bright environments. == Overview == Nona-binning is most commonly implemented in sensors with a resolution of 108 megapixels and higher. As pixel counts grew, the physical dimensions of individual pixels continued to shrink, reducing the amount of light captured by each. The 3×3 binning structure enables a sensor to operate in two modes. In well-lit scenes, each pixel is processed separately, providing the full resolution of the sensor. In darker settings, nine pixels with identical colour filters are combined into a single output unit, increasing signal strength and reducing noise. == Technical principles == Unlike the traditional Bayer colour filter array, which alternates colours on a per-pixel basis, nona-binning uses a grouped layout. The sensor forms blocks of nine pixels with matching colour filters — typically within a Quad Bayer–derived arrangement extended to 3×3 regions. When operating in the binning mode, the sensor aggregates the charge generated by all nine pixels in each block. This increases effective sensitivity but lowers the final image resolution. When lighting conditions allow, the sensor returns to processing pixel data individually. == Applications == Nona-binning is primarily used in: Smartphone photography, particularly in devices equipped with sensors exceeding 100 megapixels. Low-light imaging, where increased sensitivity improves exposure stability and reduces noise. Computational photography systems, such as multi-frame processing and HDR capture. == Related technologies == Nona-binning belongs to the broader group of pixel-binning approaches used in modern sensors. Other implementations include Tetracell, which merges four pixels in a 2×2 block, and hexa-binning, which combines six pixels, though it is less common. All of these methods aim to balance the high nominal resolution of mobile sensors with the need for improved low-light performance.
Read more →
Clue (mobile app)

Clue is a menstrual health app developed by the Berlin-based technology company BioWink GmbH. The app has over 15 million users from 180 countries. The startup has raised over $17 million from backers that include Union Square Ventures and Mosaic Ventures. == History == Clue was co-founded by Ida Tin, Hans Raffauf, Mike LaVigne and Moritz von Buttlar in 2012. BioWink GmbH launched the app in 2013. Ida Tin's stated goal was to take female reproductive health “out of taboo land” and to start “a reproductive health revolution.” Tin previously led motorbike tours around the world and wrote a book about her experience. By July 2017, the Clue app had more than 8 million active users on both Android and iOS. Users were representative of more than 180 countries. In 2015, BioWink GmbH closed a $7 million Series A funding round led by Union Square Ventures and Mosaic Ventures, bringing the company's total funding to $10 million. The company was listed as one of Europe's Hottest Startups in 2015 by Wired UK, with Clue being named one of the best apps in 2015 by both Apple and Google. In March 2018, the company launched an editorial site to serve as a resource for accessible and scientific menstrual health information. == Mobile app == The Clue mobile application calculates and predicts a user's period, fertile window, and premenstrual syndrome. It also informs users the most or least likely time for becoming pregnant and allows them to track more than 30 health categories, including sex, sleep, pain, exercise, hair, skin, digestion, emotions and energy. The app can also explain how pill dosages impact fertility and includes an alarm system to allow for reminders for taking pills. In 2015, the company closed a Series A funding round and announced plans to use the proceeds to expand features of the mobile app and hire more staff. Clue also partnered with universities such as Stanford University, Columbia University, University of Washington, and University of Oxford to advance female health research. Clue integrated with Apple Inc.'s HealthKit for iOS 9 in September 2015, allowing data such as body temperature, cervical mucus quality, menstruation, ovulation test results, sexual activity, and spotting directly to the app. In 2016, Clue was available in 15 languages on both iOS and Android. That same year, Clue introduced a cycle-sharing feature and in 2017 a pill-tracking option. In February 2018, Clue made its app available on the Fitbit Ionic smartwatch. In 2026, Clue partnered with UK-based digital healthcare platform Evaro, an NHS-licensed provider, to offer embedded prescription services within the app.
Read more →
Lawbot

Lawbots are a broad class of customer-facing legal AI applications that are used to automate specific legal tasks, such as document automation and legal research. The terms robot lawyer and lawyer bot are used as synonyms to lawbot. A robot lawyer or a robo-lawyer refers to a legal AI application that can perform tasks that are typically done by paralegals or young associates at law firms. However, there is some debate on the correctness of the term. Some commentators say that legal AI is technically speaking neither a lawyer nor a robot and should not be referred to as such. Other commentators believe that the term can be misleading and note that the robot lawyer of the future will not be one all-encompassing application but a collection of specialized bots for various tasks. Lawbots use various artificial intelligence techniques or other intelligent systems to limit humans' direct ongoing involvement in certain steps of a legal matter. The user interfaces on lawbots vary from smart searches and step-by-step forms to chatbots. Consumer and enterprise-facing lawbot solutions often do not require direct supervision from a legal professional. Depending on the task, some client-facing solutions used at law firms operate under an attorney supervision. == Levels of autonomy == The following levels of autonomy (LoA) are suggested for automated AI legal reasoning: Level 0 (LoA0): No automation for AI legal reasoning Level 1 (LoA1): Simple assistance automation Level 2 (LoA2): Advanced assistance automation Level 3 (LoA3): Semi-autonomous automation Level 4 (LoA4): Domain automation Level 5 (LoA5): Fully-autonomous automation Level 6 (LoA6): Superhuman automation == Examples == Some legal AI solutions are developed and marketed directly to the customers or consumers, whereas other applications are tools for the attorneys at law firms. There are already hundreds of legal AI solutions that operate in multitude of ways varying in sophistication and dependence on scripted algorithms. One notable legal technology chatbot application is DoNotPay. It had started off as an app for contesting parking tickets, but has since expanded to include features that help users with many different types of legal issues, ranging from consumer protection to immigration rights and other social issues. == Impact on the legal industry == In the 2016 report, Deloitte estimated that more than 110,000 law jobs in just the United Kingdom alone could disappear within the next twenty years due to automation. This change could result in the creation of more highly skilled jobs and in the reduction of paralegal and temporary positions. Deloitte's report asserts that "there is significant potential for high-skilled roles that involve repetitive processes to be automated by smart and self-learning algorithms". According to Lawyers to Engage, between 22% of a lawyer’s work and 35% of a legal assistant’s work can be automated in the US. Top law schools like Harvard have already begun to integrate Artificial Intelligence into the curriculum. Legal tech start-up companies have begun developing applications that assist law firms with completing low-risk legal processes. These applications can enable lawyers to focus on more work that requires their specific expertise. The automation of processes like contract reviewing, enforcement of negotiations (smart contracts) and client intake (expert systems) allows law firms to streamline their procedures and improve efficiency. In addition, automation benefits small-to-medium law firms that do not have the resources to utilize junior talent on such routine tasks. The increase of law firms utilizing automated applications could result into legal tech becoming a necessity in the industry. Digital Reason CEO, Tim Estes, stated that those who refuse the opportunity to integrate AI in their workflow are “most at risk.” In 2018, Forbes reported a 713% increase in investments in legal tech. This rapid growth is reflective of law firms beginning to “cede business to… new model legal providers… that meld technological, business and legal expertise.” == Access to law and justice == It has been widely estimated for at least the last generation that all the programs and resources devoted to ensuring access to justice address only 20% of the civil legal needs of low-income people in the United States. Drawing on this experience, in late 2011, the U.S. government-funded Legal Services Corporation decided to convene a summit of leaders to explore how best to use technology in the access-to-justice community. The group adopted a mission for The Summit on the Use of Technology to Expand Access to Justice (Summit) consistent with the magnitude of the challenge: "to explore the potential of technology to move the United States toward providing some form of effective assistance to 100% of persons otherwise unable to afford an attorney for dealing with essential civil legal needs". In April 2017, joined by Microsoft and Pro Bono Net, the Legal Services Corporation (LSC) announced a pilot program to develop online, statewide legal portals to direct individuals with civil legal needs to the most appropriate forms of assistance. == Technological limitations == Current research in subjects such as computational privacy, explainable machine learning, Bayesian deep learning, knowledge-intensive machine learning, and transfer learning reveals that we do not yet have the technology to enable Level 4 to 6 AI lawbots. In 2023, OpenLaw began developing a model called Law Bot, which interacts in a conversational way as an attorney. The dialogue format makes it possible for Law Bot to answer follow-up questions, challenge incorrect premises, and reject inappropriate requests. Currently, they try to ensure it is in full compliance with all laws and regulations while conducting further beta testing before releasing it to the general public.
Read more →
VOCEDplus

VOCEDplus is a free international research database about tertiary education, maintained and developed by staff at the c (NCVER) in Adelaide, South Australia. The focus of the database content is the relation of post-compulsory education and training to workforce needs, skills development, and social inclusion. == Structure == The content of the VOCEDplus database encompasses vocational education and training (VET), higher education, lifelong learning, informal learning, VET in schools, adult and community education, apprenticeships/traineeships, international education, providers of education and training, and workforce development. It is international in scope and contains over 84,000 English language records, many with links to full text documents. VOCEDplus contains extensive Australian materials and includes a wide range of international information, covering outcomes of tertiary education in the shape of published research, practice, policy, and statistics. Entries are included for the following types of publications: reports; annual reports; papers; discussion papers; occasional papers; working papers; books; book chapters; conference papers; conference proceedings; journals; journal articles; policy documents; published statistics; theses; podcasts; and teaching and training materials. Each database entry contains standard bibliographic information and an abstract. Many entries include full text access via the publisher's website or a digitised copy. == History == === 1989-1997 === In the early years VOCEDplus was known as VOCED. The original database was produced by a network of clearinghouses across Australia with the aim of sharing activities in the technical and further education (TAFE) sector. VOCED was produced in hardcopy and an electronic version was distributed on diskette. === 1997-2001 === 1997 - the first web version of VOCED was made available from the National Centre for Vocational Education Research (NCVER) organisational website 1998 - a major project to upgrade the database and expand its international coverage commenced 2001 - creation of VOCED's own website 2001 - VOCED endorsed as the UNESCO international database for technical and vocational education and training (TVET) research information === 2001-2009 === Many changes to the database and website occurred during this period with a focus on continuous improvement to meet the needs of users and utilise emerging technologies. 2006 - materials produced for two adult literacy and learning programs funded by the Australian Department of Education, Employment and Workplace Relations (DEEWR) - the Workplace English Language and Learning (WELL) Programme and the Adult Literacy National Project (ALNP) included in VOCED 2007 - the Australian clearinghouse network transferred most of the hardcopy collections to NCVER, to form a centralised repository of resources 2009 - materials produced by Reframing the Future (RTF) a vocational education and training workforce development initiative of the Australian, State and Territory Governments included in VOCED === 2009-2014 === A major rebuild of the database and website was undertaken during this period to take advantage of the potential of new technologies to provide improved services and incorporate Web 2.0 technologies (RSS feeds, and share and bookmark tools). 2009 - scope expanded to more fully encompass the higher education sector 2011 - launch of VOCEDplus with the name change representing the enhanced features and extended focus 2012 - a major retrospective digitisation project commenced and by the end of the 2012-2013 financial year a total of 9,328 publications (593,534 pages/microfiche frames) had been digitised, ensuring these publications are available electronically for free === 2014-2019 === A number of significant curated content products were released during this period. 2015 - release of a refreshed look to adopt the new NCVER branding plus a number of search enhancements (Guided search, Expert search, and Glossary search) were added 2015 - first in the series of 'Focus on...' pages released 2016 - launch of the 'Pod Network', a convenient and efficient platform that allows instant access to research and a multitude of resources on a range of subjects 2017 - completion of the 'Pod Network', consisting of 20 Pods (on broad subjects including Apprenticeships and traineeships, Foundation skills, Teaching and learning, Career development, and Students) and 74 Podlets (on narrow topics including Online learning, Social media, VET in schools, STEM skills, and Adult literacy) 2018 - launch of the 'Timeline of Australian VET Policy Initiatives' and the 'VET Knowledge Bank' which contains a suite of products capturing Australia's diverse, complex and ever-changing VET system 2019 - after an internal review, a refreshed, streamlined version of the 'Pod Network' was released, consisting of 13 Pods and 20 Podlets 2019 - launch of the 'VET Practitioner Resource' which contains a range of information to support VET practitioners in their work and is organised into three sections: (1) Teaching, training and assessment: standards, guidance, research and good practice resources to inform daily work; (2) Practitioners as researchers: information for undertaking practitioner-led research; and (3) The VET workforce: information about VET teachers and trainers, and the professional development needs of the VET workforce 2019 - VOCEDplus celebrated 30 years of providing information to the tertiary education sector and the homepage was refreshed to make it more modern and easier to use === 2020- === VOCEDplus continued to be accessible throughout the COVID-19 pandemic. 2020-2021 - the VET Knowledge Bank added a dedicated page, 'COVID-19 announcements', that showcases the measures introduced by the Australian, state and territory governments to mitigate the impact of the pandemic and promote economic recovery 2020-2024 - published research about the effects of the pandemic on education and training, providers, students, labour markets, employment and employees was collected and made permanently available in the database 2024 - VOCEDplus celebrated 35 years of providing information to the tertiary education sector. The homepage was refreshed and a number of enhancements and new features were implemented including a new My Profile feature, improvements to My Selection, accessible search history and saved searches, enhanced search functionality, and improved navigation.
Read more →
Fatsecret

Fatsecret, commonly styled as fatsecret, is a mobile application, website and API that helps people achieve their weight loss goals and find accurate nutrition information. It also offers a weight loss clinic with coaching and medically supported programs. The platform powers global health apps. == History == Fatsecret was founded in 2006 in Melbourne, Australia by Lenny Moses and Rodney Moses. As of 2019, Lenny serves as the company's CEO. The company is known for its calorie counting and meal tracking app, and by April 2016, the company claimed to have 45 million users of its services. In August 2018, a premium version of its app was released. Since August 2009, the company has operated the Fatsecret Platform API, which allows access to its global food and nutrition database. Fatsecret reportedly had 900,000 downloads of its app in January 2020. In an analysis of several Health & Fitness app subcategories for the United States in January 2021, Fatsecret was reported to have the highest 30 day user retention rate of top Calorie Counter + Meal Planner for Weight Loss apps.
Read more →
Microsoft To Do

Microsoft To Do (previously styled as Microsoft To-Do) is a cloud-based task management application. It allows users to manage their tasks from a smartphone, tablet and computer. The technology is produced by the team behind Wunderlist, which was acquired by Microsoft, and the stand-alone apps feed into the existing Tasks feature of the Outlook product range. == History == Microsoft To Do was first launched as a preview with basic features in April 2017. Later more features were added including Task list sharing in June 2018. In September 2019, a major update to the app was unveiled, adopting a new user interface with a closer resemblance to Wunderlist. The name was also slightly updated by removing the hyphen from To-Do. In May 2020, Microsoft officially closed the doors on Wunderlist, ending its active service in favor of improving and expanding Microsoft To Do.
Read more →