AI Data Bias

AI Data Bias — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  EfficientNet

  EfficientNet is a family of convolutional neural networks (CNNs) for computer vision published by researchers at Google AI in 2019. Its key innovation is compound scaling, which uniformly scales all dimensions of depth, width, and resolution using a single parameter. EfficientNet models have been adopted in various computer vision tasks, including image classification, object detection, and segmentation. == Compound scaling == EfficientNet introduces compound scaling, which, instead of scaling one dimension of the network at a time, such as depth (number of layers), width (number of channels), or resolution (input image size), uses a compound coefficient ϕ {\displaystyle \phi } to scale all three dimensions simultaneously. Specifically, given a baseline network, the depth, width, and resolution are scaled according to the following equations: depth multiplier: d = α ϕ width multiplier: w = β ϕ resolution multiplier: r = γ ϕ {\displaystyle {\begin{aligned}{\text{depth multiplier: }}d&=\alpha ^{\phi }\\{\text{width multiplier: }}w&=\beta ^{\phi }\\{\text{resolution multiplier: }}r&=\gamma ^{\phi }\end{aligned}}} subject to α ⋅ β 2 ⋅ γ 2 ≈ 2 {\displaystyle \alpha \cdot \beta ^{2}\cdot \gamma ^{2}\approx 2} and α ≥ 1 , β ≥ 1 , γ ≥ 1 {\displaystyle \alpha \geq 1,\beta \geq 1,\gamma \geq 1} . The α ⋅ β 2 ⋅ γ 2 ≈ 2 {\displaystyle \alpha \cdot \beta ^{2}\cdot \gamma ^{2}\approx 2} condition is such that increasing ϕ {\displaystyle \phi } by a factor of ϕ 0 {\displaystyle \phi _{0}} would increase the total FLOPs of running the network on an image approximately 2 ϕ 0 {\displaystyle 2^{\phi _{0}}} times. The hyperparameters α {\displaystyle \alpha } , β {\displaystyle \beta } , and γ {\displaystyle \gamma } are determined by a small grid search. The original paper suggested 1.2, 1.1, and 1.15, respectively. Architecturally, they optimized the choice of modules by neural architecture search (NAS), and found that the inverted bottleneck convolution (which they called MBConv) used in MobileNet worked well. The EfficientNet family is a stack of MBConv layers, with shapes determined by the compound scaling. The original publication consisted of 8 models, from EfficientNet-B0 to EfficientNet-B7, with increasing model size and accuracy. EfficientNet-B0 is the baseline network, and subsequent models are obtained by scaling the baseline network by increasing ϕ {\displaystyle \phi } . == Variants == EfficientNet has been adapted for fast inference on edge TPUs and centralized TPU or GPU clusters by NAS. EfficientNet V2 was published in June 2021. The architecture was improved by further NAS search with more types of convolutional layers. It also introduced a training method, which progressively increases image size during training, and uses regularization techniques like dropout, RandAugment, and Mixup. The authors claim this approach mitigates accuracy drops often associated with progressive resizing.

  Read more →
• 

  Artificial Intelligence for Digital Response

  Artificial Intelligence for Digital Response (AIDR) is a free and open source platform to filter and classify social media messages related to emergencies, disasters, and humanitarian crises. It has been developed by the Qatar Computing Research Institute and awarded the Grand Prize for the 2015 Open Source Software World Challenge. Muhammad Imran stated that he and his team "have developed novel computational techniques and technologies, which can help gain insightful and actionable information from online sources to enable rapid decision-making" - according to him the system "combines human intelligence with machine learning techniques, to solve many real-world challenges during mass emergencies and health issues". == How to use == It can be used by logging in with ones Twitter credentials and by collecting tweets by specifying keywords or hashtags, like #ChileEarthquake, and possibly a geographical region as well. == Use == It has been deployed in conjunction with UNICEF in Zambia to classify short messages related to AIDS/HIV received through the U-Report platform. AIDR was used for the first time during the 2010 Pakistan floods. The first real test of AIDR took place during the 2014 Iquique earthquake in Chile. == Related talks and events == Muhammad Imran delivered a keynote talk on the science behind the AIDR system at the International Conference on Information Systems for Crisis Response And Management (ISCRAM). Abdelkader Lattab and Ji Lucas also presented the system at the 2016 QCRI-IBM Data Science Connect event.

  Read more →
• 

  Democratization of technology

  Democratization of technology is the process by which access to technology rapidly extends to an ever-broader audience, especially from a select group of people to the average public. New technologies and improved user experiences have empowered those outside of the technical industry to access and use technological products and services. At an increasing scale, consumers have greater access to use and purchase technologically sophisticated products, as well as to participate meaningfully in the development of these products. Industry innovation and user demand have been associated with more affordable, user-friendly products. This is an ongoing process, beginning with the development of mass production and increasing dramatically as digitization became commonplace. Thomas Friedman argued that the era of globalization has been characterized by the democratization of technology, democratization of finance, and democratization of information. Technology has been critical in the latter two processes, facilitating the rapid expansion of access to specialized knowledge and tools, as well as changing the way that people view and demand such access. A counter argument is that this is just a process of 'massification' - more people can use banks, technology, have access to information, but it does not mean there is any more democratic influence over its production, or that this massification promotes Democracy. == History == Scholars and social critics often cite the invention of the printing press as a major invention that changed the course of history. The force of the printing press rested not in its impact on the printing industry or inventors, but on its ability to transmit information to a broader public by way of mass production. This event is so widely recognized because of its social impact – as a democratizing force. The printing press is often seen as the historical counterpart to the Internet. After the development of the Internet in 1969, its use remained limited to communications between scientists and within government, although use of email and boards gained popularity among those with access. It did not become a popular means of communication until the 1990s. In 1993 the US federal government opened the Internet to commerce and the creation of HTML formed the basis for universal accessibility. === Major innovations === The Internet has played a critical role in modern life as a typical feature of most Western households, and has been key in the democratization of knowledge. It not only constitutes arguably the most critical innovation in this trend thus far; it has also allowed users to gain knowledge of and access to other technologies. Users can learn of new developments more quickly, and purchase high-tech products otherwise only actively marketed to recognized experts. Social media has also empowered and emboldened users to become contributors and critics of technological developments. Some have argued that cloud computing is having a major effect by allowing users greater access through mobility and pay-as-you-use capacity. The open-source model allows users to participate directly in development of software, rather than indirect participation, through contributing opinions. By being shaped by the user, development is directly responsive to user demand and can be obtained for free or at a low cost. In a comparable trend, arduino and littleBits have made electronics more accessible to users of all backgrounds and ages. The development of 3D printers has the potential to increasingly democratize production. Generative artificial intelligence tools have the potential to democratize the process of innovation by improving the ability of individuals to specify and visualize ideas. The democratization of artificial intelligence refers to the transition from AI as a high-cost, specialized field to one accessible to non-experts and smaller organizations. This process is driven by the release of open-weights models, the availability of cloud computing for model training, and the emergence of no-code development platforms. While early AI development was concentrated within Big Tech firms and elite research universities, the 2020s saw a proliferation of public tools like ChatGPT and repositories such as Hugging Face, which lowered the technical barriers to entry. However, the trend has faced criticism as the "illusion of democratization," as the underlying GPU hardware remains concentrated among a few global providers. == Cultural impact == This trend is linked to the spread of knowledge of and ability to perform high-tech tasks, challenging previous conceptions of expertise. Widespread access to technology, including lower costs, was critical to the transition to the new economy. Similarly, democratization of technology was also fuelled by this economic transition, which produced demands for technological innovation and optimism in technology-driven progress. Since the 1980s, a spreading constructivist conception of technology has emphasized that the social and technical domains are critically intertwined. Scholars have argued that technology is non-neutral, defined contextually and locally by a certain relationship with society. Andrew Feenberg, a central thinker in the philosophy of technology, argued that democratizing technology means expanding technological design to include alternative interests and values. When successful in doing so, this can be a tool for increasing inclusiveness. This also suggests an important participatory role for consumers if technology is to be truly democratic. Feenberg asserts that this must be achieved by consumer intervention in a liberated design process. Improved access to specialized knowledge and tools has been associated with an increase in the "do it yourself" (DIY) trend. This has also been associated with consumerization, whereby personal or privately owned devices and software are also used for business purposes. Some have argued that this is linked to reduced dependence on traditional information technology departments. Astra Taylor, the author of the book The People's Platform: Taking Back Power and Culture in the Digital Age, argues, "The promotion of Internet-enabled amateurism is a lazy substitute for real equality of opportunity." === Industry impact === In some ways, democratization of technology has strengthened this industry. Markets have broadened and diversified. Consumer feedback and input is available at a very low or no cost. However, related industries are experiencing decreased demand for qualified professionals as consumers are able to fill more of their demands themselves. Users of a range of types and status have access to increasingly similar technology. Because of the decreased costs and expertise necessary to use products and software, professionals (e.g. in the audio industry) may experience loss of work. In some cases, technology is accessible but sufficiently complex that most users without specialized training are able to operate it without necessarily understanding how it works. Additionally, the process of consumerization has led to an influx in the number of devices in businesses and accessing private networks that IT departments cannot control or access. While this can lead to lowered operating costs and increased innovation, it is also associated with security concerns that most businesses are unable to address at the pace of the spread of technology. === Political impact === Some scholars have argued that technological change will bring about a third wave of democracy. The Internet has been recognized for its role in promoting increased citizen advocacy and government transparency. Jesse Chen, a leading thinker in democratic engagement technologies, distinguishes the democratizing effects of technology from democracy itself. Chen has argued that, while the Internet may have democratizing effects, the Internet alone cannot deliver democracy at all levels of society unless technologies are purposely designed for the nuances of democracy, specifically the engagement of large groups of people in between elections in and beyond government. The spread of the Internet and other forms of technology has led to increased global connectivity. Many scholars believe that it has been associated in the developing world not only with increased Western influence, but also with the spread of democracy through increased communication, efficiency, and access to information. Scholars have drawn associations between the level of technological connectedness and democracy in many nations. Technology can enhance democracy in the developed world as well. In addition to increased communication and transparency, some electorates have implemented online voting to accommodate an increased number of citizens.

  Read more →
• 

  Line splice

  In electrical engineering and telecommunications, a line splice is a joint directly connecting lengths of electrical cables (electrical splice) or optical fibers (optical splice). The splices are often protected by sleeves. == Splicing of copper wires == The splicing of copper wires happens in the following steps: The cores are laid one above the other at the junction. The core insulation is removed. The wires are wrapped two to three times around each other (twisting). The bare veins on a length of about 3 cm "strangle" or "twist". In some cases, the strangulation is soldered. To isolate the splice, an insulating sleeve made of paper or plastic is pushed over it. The splicing of copper wires is mainly used on paper insulated wires. LSA techniques (LSA: soldering, screwing and stripping free) are used to connect copper wires, making the copper wires faster and easier to connect. LSA techniques include: Wire connection sleeves (AVH = Adernverbindungshülsen) and other crimp connectors. The two wires to be connected are inserted into the AVH without being stripped, which is then compressed with special pliers. The about 2 cm long AVH consist of contact, pressure and insulation. For wire connection strips (AVL = Adernverbindungsleisten) several pairs of wires (10 = AVL10 or 20 = AVL20) are inserted, the strip is then closed with a lid and pressed together with a hydraulic press, which ensures the connection. == Splicing of glass fibers == Fiber-optic cables are spliced using a special arc-splicer, with installation cables connected at their ends to respective "pigtails" - short individual fibers with fiber-optic connectors at one end. The splicer precisely adjusts the light-guiding cores of the two ends of the glass fibers to be spliced. The adjustment is done fully automatically in modern devices, whereas in older models this is carried out manually by means of micrometer screws and microscope. An experienced splicer can precisely position the fiber ends within a few seconds. Subsequently, the fibers are fused together (welded) with an electric arc. Since no additional material is added, such as gas welding or soldering, this is called a "fusion splice". Depending on the quality of the splicing process, attenuation values at the splice points are achieved by 0.3 dB, with good splices also below 0.02 dB. For newer generation devices, alignment is done automatically by motors. Here one differentiates core and jacket centering. At core centering (usually single-mode fibers), the fiber cores are aligned. A possible core offset with respect to the jacket is corrected. In the jacket centering (usually in multimode fibers), the fibers are adjusted to each other by means of electronic image processing in front of the splice. When working with good equipment, the damping value is according to experience at max. 0.1 dB. Measurements are made by means of special measuring devices including optical time-domain reflectometry (OTDR). A good splice should have an attenuation of less than 0.3 dB over the entire distance. Finished fiber optic splices are housed in splice boxes. One differentiates: Fusion splice Adhesive splicing Crimp splice or NENP (no-epoxy no-polish), mechanical splice

  Read more →
• 

  Adobe Encore

  Adobe Encore (previously Adobe Encore DVD) was a DVD authoring software tool produced by Adobe Systems and targeted at professional video producers. Video and audio resources could be used in their current format for development, allowing the user to transcode them to MPEG-2 video and Dolby Digital audio upon project completion. DVD menus could be created and edited in Adobe Photoshop using special layering techniques. Adobe Encore did not support writing to a Blu-ray Disc using AVCHD 2.0. Encore is bundled with Adobe Premiere Pro CS6. Adobe Encore CS6 was the last release. While Premiere Pro CC has moved to the Creative Cloud, Encore has now been discontinued. == Licensing == All forms of Adobe Encore used a proprietary licensing system from its developer, Adobe Systems. Versions 1.0 and 1.5 required a separate license fee (rather than making 1.5 available as a free update). Version 3, also known as CS3, was sold only in bundle with Premiere CS3. Encore CS4, CS5, CS5.5 and CS6 were only sold in the Premiere Pro CS4, CS5, CS5.5 and CS6 bundles, respectively. Adobe CC subscribers no longer have access to Adobe Encore CS6. Adobe Encore is not included with Premiere Pro CC. == Functionality == Adobe Encore allowed for creating interactive DVD menus from Photoshop documents, which could be tweaked from within Encore. Video and audio streams could be embedded in the DVD and be made to play when certain elements of the menu are interacted with. It had similar functionality to Adobe Flash and Premiere Pro, due to its ability to both edit video on a timeline and embed interactive content.

  Read more →
• 

  Daylight Computer Co.

  Daylight Computer Co. is a Public Benefit Company that designs and manufactures devices that do not emit blue light or flicker. Anjan Katta, the company's founder and CEO, stated that he started the company to reduce his personal eyestrain and the distraction that came with conventional devices. The first device that the company released is the Daylight DC-1, a tablet using a monochrome transflective liquid-crystal display designed for outdoor use, while also being usable indoors with an amber backlight. The company's goal is to create a "healthy computer." == History == In June 2018, Anjan Katta began the process of designing a device that did not emit blue light or flicker. He was inspired by the Kindle stating that he wanted to create a device that was, "an analog object that happens to have digital magical capabilities.” By 2020, he created his first scientific prototype and created the first proof-of-concept prototype in 2021. In the early research and development stages of the device, Katta had spent $300,000 of his own money. Eventually, Katta obtained a $12 million investment from current and former executives of companies such as Oculus, Pinterest, and Dropbox. In 2024, the company held a launch party at the Conservatory of Flowers in Golden Gate Park for the Daylight DC1, the company's first device. The event had roughly 200 attendees. Later that year, Daylight sold out its first run of 5,000 devices. The Daylight DC1 is a 1.2 pound tablet that runs its own operating system, SolOS, based on Android 13. It has a refresh rate of 60 Hz, fast enough to process video. In 2025, the product was demonstrated by Danny Jones on the Joe Rogan Experience. The company has been described by outlets such as Wired and VentureBeat as a "returning computing to hippie ideals" and being a product for "techno-hippies." The company is headquartered in San Francisco, California.

  Read more →
• 

  Groundswell (book)

  Groundswell is a book by Forrester Research executives Charlene Li and Josh Bernoff that focuses on how companies can take advantage of emerging social technologies. It was published in 2008 by Harvard Business Press. A revised edition was published in 2011. The book attempts to explain a shift in the relationship between customers and companies, in which companies are no longer able to control customers' attitudes through market research, customer service, and advertising. Instead, customers are controlling the conversation by using new media to communicate about products and companies. == Synopsis == The groundswell is characterized by several tactics that guide companies into using social technologies strategically and effectively. Listening: Businesses should listen to their customers to understand what the market is looking for in their products. In order to do this, a company needs to find out if their customers are using social technologies and how they are using them. Talking: Instead of advertising to customers, marketing departments should find creative ways to connect with users about their experience with a product and their feelings about the brand. One common method is participation in social networks. Energizing: Enthusiastic customers are part of the groundswell, and companies can recognize and appreciate these customers by creating online communities and social platforms where they can connect with the brand and provide reviews. Supporting: Businesses can harness the support of their own employees by creating internal social applications for them to connect with the brand, also known as enterprise social software. == Groundswell in action == === Examples === Some companies distinguish their product through the use of social technologies. Tom Dickson successfully marketed his Blendtec line of blenders through the viral marketing campaign Will It Blend? The groundswell spread marketing messages through Digg and YouTube with a small budget and little marketing experience. Other companies have been able to listen to and talk with the groundswell by building their own online communities. Procter & Gamble created beinggirl.com Archived 2016-04-10 at the Wayback Machine to introduce girls to P&G feminine care products. The community approach worked because the company could reach girls with information that might seem embarrassing or sensitive in a traditional marketing campaign. === Risks === Features of particular industries or companies can make direct customer engagement more difficult. For instance, some companies must work within industry regulations, national or multinational corporations must balance corporate and local engagement, and other companies must find ways to engage with customers on time-sensitive issues. == Reception == Kevin Allison of the Financial Times praised the book for its focus on Web analytics: "[Groundswell] is not so much a manifesto or a dissection of online culture as it is a how-to manual for executives and mid-level managers trying to navigate this fast-changing and often confusing environment." The book won the American Marketing Association Foundation’s Berry-AMA Book Prize for best marketing book of 2009. It was also listed by: Amazon, as one of the Top 10 Business & Investing Books of 2008 CIO Insight, as one of the Top 10 Business-Tech Books of 2008 and one of 10 Insightful Web 2.0 Books Fortune as Magazine as one of the 3 best Web books of 2008 Advertising Age as number 3 of 10 Books You Should Have Read BusinessWeek as one of the Best Innovation & Design Books of 2008 "strategy+business" as one of the Best Business Books 2008 and “Top Shelf” in Marketing

  Read more →
• 

  Economía Feminista

  Economía Feminista, in English: Feminist Economics, is an Argentine digital media, focused on disclosure and creation of economics information about the gender gap. The media is managed by Mercedes D`Alessandro, Magalí Brosio, Violeta Guitart and Agurtzane Urrutia. == Concept == Economía Femini(s)ta, is a portmanteau of feminista and minita. It attempts to end stereotypes about women. It was created in 2015 and its goal is to be a source of economic data to help to display economic differences by gender, especially in Argentina. == Awards == Economía Feminista was awarded the Lola Mora prize in 2016 for the best digital media by Dirección General de la Mujer, promoted by Buenos Aires city's Legislature.

  Read more →
• 

  Space partitioning

  In geometry, space partitioning is the process of dividing an entire space (usually a Euclidean space) into two or more disjoint subsets (see also partition of a set). In other words, space partitioning divides a space into non-overlapping regions. Any point in the space can then be identified to lie in exactly one of the regions. == Overview == Space-partitioning systems are often hierarchical, meaning that a space (or a region of space) is divided into several regions, and then the same space-partitioning system is recursively applied to each of the regions thus created. The regions can be organized into a tree, called a space-partitioning tree. Most space-partitioning systems use planes (or, in higher dimensions, hyperplanes) to divide space: points on one side of the plane form one region, and points on the other side form another. Points exactly on the plane are usually arbitrarily assigned to one or the other side. Recursively partitioning space using planes in this way produces a BSP tree, one of the most common forms of space partitioning. == Uses == === In computer graphics === Space partitioning is particularly important in computer graphics, especially heavily used in ray tracing, where it is frequently used to organize the objects in a virtual scene. A typical scene may contain millions of polygons. Performing a ray/polygon intersection test with each would be a very computationally expensive task. Storing objects in a space-partitioning data structure (k-d tree or BSP tree for example) makes it easy and fast to perform certain kinds of geometry queries—for example in determining whether a ray intersects an object, space partitioning can reduce the number of intersection test to just a few per primary ray, yielding a logarithmic time complexity with respect to the number of polygons. Space partitioning is also often used in scanline algorithms to eliminate the polygons out of the camera's viewing frustum, limiting the number of polygons processed by the pipeline. There is also a usage in collision detection: determining whether two objects are close to each other can be much faster using space partitioning. === In integrated circuit design === In integrated circuit design, an important step is design rule check. This step ensures that the completed design is manufacturable. The check involves rules that specify widths and spacings and other geometry patterns. A modern design can have billions of polygons that represent wires and transistors. Efficient checking relies heavily on geometry query. For example, a rule may specify that any polygon must be at least n nanometers from any other polygon. This is converted into a geometry query by enlarging a polygon by n/2 at all sides and query to find all intersecting polygons. === In probability and statistical learning theory === The number of components in a space partition plays a central role in some results in probability theory. See Growth function for more details. === In geography and GIS === There are many studies and applications where Geographical Spatial Reality is partitioned by hydrological criteria, administrative criteria, mathematical criteria or many others. In the context of cartography and GIS - Geographic Information System, is common to identify cells of the partition by standard codes. For example the for HUC code identifying hydrographical basins and sub-basins, ISO 3166-2 codes identifying countries and its subdivisions, or arbitrary DGGs - discrete global grids identifying quadrants or locations. == Data structures == Common space-partitioning systems include: BSP trees Quadtrees Octrees k-d trees Bins == Number of components == Suppose the n-dimensional Euclidean space is partitioned by r {\displaystyle r} hyperplanes that are ( n − 1 ) {\displaystyle (n-1)} -dimensional. What is the number of components in the partition? The largest number of components is attained when the hyperplanes are in general position, i.e, no two are parallel and no three have the same intersection. Denote this maximum number of components by C o m p ( n , r ) {\displaystyle Comp(n,r)} . Then, the following recurrence relation holds: C o m p ( n , r ) = C o m p ( n , r − 1 ) + C o m p ( n − 1 , r − 1 ) {\displaystyle Comp(n,r)=Comp(n,r-1)+Comp(n-1,r-1)} C o m p ( 0 , r ) = 1 {\displaystyle Comp(0,r)=1} - when there are no dimensions, there is a single point. C o m p ( n , 0 ) = 1 {\displaystyle Comp(n,0)=1} - when there are no hyperplanes, all the space is a single component. And its solution is: C o m p ( n , r ) = ∑ k = 0 n ( r k ) {\displaystyle Comp(n,r)=\sum _{k=0}^{n}{r \choose k}} if r ≥ n {\displaystyle r\geq n} C o m p ( n , r ) = 2 r {\displaystyle Comp(n,r)=2^{r}} if r ≤ n {\displaystyle r\leq n} (consider e.g. r {\displaystyle r} perpendicular hyperplanes; each additional hyperplane divides each existing component to 2). which is upper-bounded as: C o m p ( n , r ) ≤ r n + 1 {\displaystyle Comp(n,r)\leq r^{n}+1}

  Read more →
• 

  Bookmarklet

  A bookmarklet is a bookmark stored in a web browser that contains JavaScript commands that add new features to the browser. They are stored as the URL of a bookmark in a web browser or as a hyperlink on a web page. Bookmarklets are usually small snippets of JavaScript executed when a user clicks on them. When clicked, bookmarklets can perform a wide variety of operations, such as running a search query from selected text or extracting data from a table. Another name for bookmarklet is favelet or favlet, derived from favorites (synonym of bookmark). == History == Steve Kangas of bookmarklets.com coined the word bookmarklet when he started to create short scripts based on a suggestion in Netscape's JavaScript guide. Before that, Tantek Çelik called these scripts favelets and used that word as early as on 6 September 2001 (personal email). Brendan Eich, who developed JavaScript at Netscape, gave this account of the origin of bookmarklets: They were a deliberate feature in this sense: I invented the javascript: URL along with JavaScript in 1995, and intended that javascript: URLs could be used as any other kind of URL, including being bookmark-able. In particular, I made it possible to generate a new document by loading, e.g. javascript:'hello, world', but also (key for bookmarklets) to run arbitrary script against the DOM of the current document, e.g. javascript:alert(document.links[0].href). The difference is that the latter kind of URL uses an expression that evaluates to the undefined type in JS. I added the void operator to JS before Netscape 2 shipped to make it easy to discard any non-undefined value in a javascript: URL. The increased implementation of Content Security Policy (CSP) in websites has caused problems with bookmarklet execution and usage (2013–2015), with some suggesting that this hails the end or death of bookmarklets. William Donnelly created a work-around solution for this problem (in the specific instance of loading, referencing and using JavaScript library code) in early 2015 using a Greasemonkey userscript (Firefox / Pale Moon browser add-on extension) and a simple bookmarklet-userscript communication protocol. It allows (library-based) bookmarklets to be executed on any and all websites, including those using CSP and having an https:// URI scheme. However, if/when browsers support disabling/disallowing inline script execution using CSP, and if/when websites begin to implement that feature, it will "break" this "fix". == Concept == Web browsers use URIs for the href attribute of the tag and for bookmarks. The URI scheme, such as http or ftp, and which generally specifies the protocol, determines the format of the rest of the string. Browsers also implement javascript: URIs that to a parser is just like any other URI. The browser recognizes the specified javascript scheme and treats the rest of the string as a JavaScript program which is then executed. The expression result, if any, is treated as the HTML source code for a new page displayed in place of the original. The executing script has access to the current page, which it may inspect and change. If the script returns an undefined type (rather than, for example, a string), the browser will not load a new page, with the result that the script simply runs against the current page content. This permits changes such as in-place font size and color changes without a page reload. An immediately invoked function that returns no value or an expression preceded by the void operator will prevent the browser from attempting to parse the result of the evaluation as a snippet of HTML markup: == Usage == Bookmarklets are saved and used as normal bookmarks. As such, they are simple "one-click" tools which add functionality to the browser. For example, they can: Modify the appearance of a web page within the browser (e.g., change font size, background color, etc.) Extract data from a web page (e.g., hyperlinks, images, text, etc.) Remove redirects from (e.g. Google) search results, to show the actual target URL Submit the current page to a blogging service such as Posterous, link-shortening service such as bit.ly, or bookmarking service such as Delicious Query a search engine or online encyclopedia with highlighted text or by a dialog box Submit the current page to a link validation service or translation service Set commonly chosen configuration options when the page itself provides no way to do this Control HTML5 audio and video playback parameters such as speed, position, toggling looping, and showing/hiding playback controls, the first of which can be adjusted beyond HTML5 players' typical range setting. Installing a bookmarklet follows the same process as adding a normal bookmark; the only difference is that in place of the URL destination field is JavaScript code preceded by javascript:. Once created, bookmarklets can be run by clicking on them.

  Read more →
• 

  GlTF

  glTF (Graphics Library Transmission Format or GL Transmission Format and formerly known as WebGL Transmissions Format or WebGL TF) is a standard file format for three-dimensional scenes and models. A glTF file uses one of two possible file extensions: .gltf (JSON/ASCII) or .glb (binary). Both .gltf and .glb files may reference external binary and texture resources. Alternatively, both formats may be self-contained by directly embedding binary data buffers (as base64-encoded strings in .gltf files or as raw byte arrays in .glb files). An open standard developed and maintained by the Khronos Group, it supports 3D model geometry, appearance, scene graph hierarchy, and animation. It is intended to be a streamlined, interoperable format for the delivery of 3D assets, while minimizing file size and runtime processing by apps. As such, its creators have described it as the "JPEG of 3D". == Overview == The glTF format stores data primarily in JSON. The JSON may also contain blobs of binary data known as buffers, and refer to external files, for storing mesh data, images, etc. The binary .glb format also contains JSON text, but serialized with binary chunk headers to allow blobs to be directly appended to the file. The fundamental building blocks of a glTF scene are nodes. Nodes are organized into a hierarchy, such that a node may have other nodes defined as children. Nodes may have transforms relative to their parent. Nodes may refer to resources, such as meshes, skins, and cameras. Meshes may refer to materials, which refer to textures, which refer to images. Scenes are defined using an array of root nodes. Most of the top-level glTF properties use a flat hierarchy for storage. Nodes are saved in an array and are referred to by index, including by other nodes. A glTF scene refers to its root nodes by index. Furthermore, nodes refer to meshes by index, which refer to materials by index, which refer to textures by index, which refer to images by index. All glTF data structures support being extended using a JSON property, allowing arbitrary JSON data to be added. == Releases == === glTF 1.0 === Members of the COLLADA working group conceived the file format in 2012. At SIGGRAPH 2012, Khronos presented a demo of glTF, which was then called WebGL Transmissions Format (WebGL TF). On October 19, 2015, Khronos released the glTF 1.0 specification. ==== Adoption of glTF 1.0 ==== At SIGGRAPH 2016, Oculus announced their adoption of glTF citing the similarities to their ovrscene format. In October 2016, Microsoft joined the 3D Formats working group at Khronos to collaborate on glTF. === glTF 2.0 === The second version, glTF 2.0, was released in June 2017, and is a complete overhaul of the file format from version 1.0, with most tools adopting the 2.0 version. Based on a proposal by Fraunhofer originally presented at SIGGRAPH 2016, physically based rendering (PBR) was added, replacing WebGL shaders used in glTF 1.0. glTF 2.0 added the GLB binary format into the base specification. Other upgrades include sparse accessors and morph targets for techniques such as facial animation, and schema tweaks and breaking changes for corner cases or performance such as replacing top-level glTF object properties with arrays for faster index-based access. There is ongoing work towards import and export in Unity and an integrated multi-engine viewer and validator. ==== Adoption of glTF 2.0 ==== On March 3, 2017, Microsoft announced that they would be using glTF 2.0 as the 3D asset format across their product line, including Paint 3D, 3D Viewer, Remix 3D, Babylon.js, and Microsoft Office. Sketchfab also announced support for glTF 2.0. The glTF and GLB formats are used on and supported by companies including DGG, UX3D, Sketchfab, Facebook, Microsoft, Meta, Google, Adobe, Box, TurboSquid, Unreal Engine, Unity, and Qt Quick 3D. The format has been noted as an important standard for augmented reality, integrating with modeling software such as Autodesk Maya, Autodesk 3ds Max, and Poly. In February 2020, the Smithsonian Institution launched their Open Access Initiative, releasing approximately 2.8 million 2D images and 3D models into the public domain, using glTF for the 3D models. In July 2022, glTF 2.0 was released as the ISO/IEC 12113:2022 International Standard. Khronos stated they would make regular submissions to bring updates and new widely adopted glTF functionality into refreshed versions of ISO/IEC 12113 to ensure that there is no long-term divergence between the ISO/IEC and Khronos specifications. The open-source game engine Godot supports importing glTF 2.0 files since version 3.0 and export since version 4.0. === Extensions === The glTF format can be extended with arbitrary JSON to add new data and functionality. Extensions can be placed on any part of a glTF, including nodes, animations, materials, textures, and on the entire document. Khronos keeps a non-comprehensive registry of glTF extensions on GitHub, including all official Khronos extensions and a few third-party extensions. PBR extensions model the physical appearance of real-world objects, allowing developers to create realistic 3D assets that have the correct appearance. As new PBR extensions are released, they continue to expand PBR capabilities within the glTF framework, allowing a wider range of scenes and objects to be realistically rendered as 3D assets. The KTX 2.0 extension for universal texture compression enables 3D models in the glTF format to be highly compressed and to use natively supported texture formats, reducing file size and boosting rendering speed. Draco is a glTF extension for mesh compression, to compress and decompress 3D meshes, to help reduce the size of 3D files. It compresses vertex attributes, normals, colors, and texture coordinates. Various glTF extensions for game engine interoperability have been developed by OMI group. This includes extensions for physics shapes, physics bodies, physics joints, audio playback, seats, spawn points, and more. The VRM consortium has developed glTF extensions for advanced humanoid 3D avatars including dynamic spring bones and toon materials. == Derivative formats == 3D Tiles, an OGC Community Standard, builds on glTF to add a spatial data structure, metadata, and declarative styling for streaming massive heterogeneous 3D geospatial datasets. VRM, a model format for VR, is built on the .glb format. It is a 3D humanoid avatar specification and file format. == Software ecosystem == Khronos maintains the glTF Sample Viewer for viewing glTF assets. Khronos also maintains the glTF Validator for validating if 3D models conform to the glTF specification. Khronos maintains a glTF Compressor tool to interactively optimize and fine-tune compression settings for glTF assets using KTX 2.0 textures. glTF loaders are in open-source WebGL engines including PlayCanvas, Three.js, Babylon.js, Cesium, PEX, xeogl, and A-Frame. The Godot game engine supports and recommends the glTF format, with both import and export support. Open-source glTF converters are available from COLLADA, FBX, and OBJ. Assimp can import and export glTF. glTF files can also be directly exported from a variety of 3D editors, such as Blender, Unity (using the glTFast importer/exporter), Freecad, Vectary, Autodesk 3ds Max (natively or using Verge3D exporter), Autodesk Maya (using babylon.js exporter), Autodesk Inventor, Modo, Houdini, Paint 3D, Godot, and Substance Painter. Open-source glTF utility libraries are available for programming languages including JavaScript, Node.js, C++, C#, Python, Haskell, Java, Go, Rust, Haxe, Ada, and TypeScript. Khronos keeps a list of these libraries and other related applications on their ecosystem site. The Khronos 3D Commerce Working Group released Asset Creation Guidelines in 2020 outlining best practices for use of the glTF file format in 3D Commerce. In 2025, the Working Group launched Asset Creation Guidelines 2.0, a continuously updated resource with additional guidance for geometry, mesh optimization, UV maps, textures, materials/PBR performance, and web optimization. The Khronos PBR Neutral Tone Mappers specification is a tone mapper designed to faithfully reproduce an object's base color, hue, and saturation when using PBR rendering under grayscale lighting, supporting brand- and product-accurate color representation. Khronos maintains the glTF Asset Auditor to allow retailers and advertising technology platforms to validate 3D assets against either a default Audit Profile modelled on the 2020 3D Commerce Asset Creation Guidelines or a custom profile defined by the target application.

  Read more →
• 

  Media Block

  A Media Block or Integrated Media Block (IMB) is a component in a digital cinema projection system. Its purpose is to convert the Digital Cinema Package (DCP) content into data that ultimately produces picture and sound in a theater in compliance with DCI anti-piracy encryption requirements. == Terminology == DCI specification allows for two different security system architectures. In the first the Media Block is outside of the projector. This design is simply referred to as a "Media Block" and is typically a device attached directly to the motherboard of a Digital Cinema server. The media block is usually connected to the projector by dual-link SDI cables. Such media block is limited to processing 2K output, downscaling 4K DCPs if necessary. The second architecture describes an "Integrated Media Block". This refers to a device attached and integrated directly into the projector, which receives image data from the server, usually via a cat6 Ethernet connection. They can process 2K and 4K output. Some hardware implementations integrate the entire server on a single board and are able to work both as a MB as well as an IMB. == Security features == All security functions are contained within a Secure Processing Block (SPB), a tamper-proof physical device. Upon ingestion into a DCP server, Key Delivery Messages (KDM) are stored on flash memory in the media block or IMB. A KDM is written to enable the playback of a specific DCP during a specific time window and on a specific media block or IMB, identified by its serial number during the authoring process. Media blocks and IMBs also contain a secure clock that is set in the factory cannot be altered by the end user, which the DCP servers to which they are attached use to determine showtimes. The secure clock prevents theaters from showing encrypted movies outside the times authorized by the KDM (e.g. after it has expired) by simply changing the date and time in the server's BIOS. Media blocks and IMBs also typically include anti-tamper devices, designed to self-destruct the unit if unauthorized modification of its hardware, software or secure clock is attempted.

  Read more →
• 

  Imieliński–Lipski algebra

  In database theory, Imieliński–Lipski algebra is an extension of relational algebra onto tables with different types of null values. It is used to operate on relations with incomplete information. Imieliński–Lipski algebras are defined to satisfy precise conditions for semantically meaningful extension of the usual relational operators, such as projection, selection, union, and join, from operators on relations to operators on relations with various kinds of "null values". These conditions require that the system be safe in the sense that no incorrect conclusion is derivable by using a specified subset F of the relational operators; and that it be complete in the sense that all valid conclusions expressible by relational expressions using operators in F are in fact derivable in this system. For example, it is well known that the three-valued logic approach to deal with null values, supported treatment of nulls values by SQL is not complete, see Ullman book. To show this, let T be: Take SQL query Q SQL query Q will return empty set (no results) under 3-valued semantics currently adopted by all variants of SQL. This is the case because in SQL, NULL is never equal to any constant – in this case, neither to “Spring” nor “Fall” nor “Winter” (if there is Winter semester in this school). NULL='Spring' will evaluate to MAYBE and so will NULL='Fall'. The disjunction MAYBE OR MAYBE evaluates to MAYBE (not TRUE). Thus Igor will not be part of the answer (and of course neither will Rohit). But Igor should be returned as the answer. Indeed, regardless what semester Igor took the Networks class (no matter what was the unknown value of NULL), the selection condition will be true. This “Igor” will be missed by SQL and the SQL answer would be incomplete according to completeness requirements specified in Tomasz Imieliński, Witold Lipski, 'Incomplete Information in Relational Databases'. It is also argued there that 3-valued logic (TRUE, FALSE, MAYBE) can never provide guarantee of complete answer for tables with incomplete information. Three algebras which satisfy conditions of safety and completeness are defined as Imielinski–Lipski algebras: the Codd-Tables algebra, the V-tables algebra and the Conditional tables (C-tables) algebra. == Codd-tables algebra == Codd-tables algebra is based on the usual Codd's single NULL values. The table T above is an example of Codd-table. Codd-table algebra supports projection and positive selections only. It is also demonstrated in [IL84 that it is not possible to correctly extend more relational operators over Codd-Tables. For example, such basic operation as join is not extendable over Codd-tables. It is not possible to define selections with Boolean conditions involving negation and preserve completeness. For example, queries like the above query Q cannot be supported. In order to be able to extend more relational operators, more expressive form of null value representation is needed in tables which are called V-table. == V-tables algebra == V-tables algebra is based on many different ("marked") null values or variables allowed to appear in a table. V-tables allow to show that a value may be unknown but the same for different tuples. For example, in the table below Gaurav and Igor order the same (but unknown) beer in two unknown bars (which may, or may not be different – but remain unknown). Gaurav and Jane frequent the same unknown bar (Y1). Thus, instead one NULL value, we use indexed variables, or Skolem constants . V-tables algebra is shown to correctly support projection, positive selection (with no negation occurring in the selection condition), union, and renaming of attributes, which allows for processing arbitrary conjunctive queries. A very desirable property enjoyed by the V-table algebra is that all relational operators on tables are performed in exactly the same way as in the case of the usual relations. === Conditional tables (c-tables) algebra === Example of conditional table (c-table) is shown below. It has additional column “con” which is a Boolean condition involving variables, null values – same as in V-tables. over the following table c-table Conditional tables algebra, mainly of theoretical interest, supports projection, selection, union, join, and renaming. Under closed-world assumption, it can also handle the operator of difference, thus it can support all relational operators. == History == Imieliński–Lipski algebras were introduced by Tomasz Imieliński and Witold Lipski Jr. in Incomplete Information in Relational Databases.

  Read more →
• 

  Temporal resolution

  Temporal resolution (TR) refers to the discrete resolution of a measurement with respect to time. It is defined as the amount of time needed to revisit and acquire data for the same location. When applied to remote sensing, this amount of time is influenced by the sensor platform's orbital characteristics and the features of the sensor itself. The temporal resolution is low when the revisiting delay is high and vice versa. Temporal resolution is typically expressed in days. == Physics == Often there is a trade-off between the temporal resolution of a measurement and its spatial resolution, due to Heisenberg's uncertainty principle. In some contexts, such as particle physics, this trade-off can be attributed to the finite speed of light and the fact that it takes a certain period of time for the photons carrying information to reach the observer. In this time, the system might have undergone changes itself. Thus, the longer the light has to travel, the lower the temporal resolution. == Technology == === Computing === In another context, there is often a tradeoff between temporal resolution and computer storage. A transducer may be able to record data every millisecond, but available storage may not allow this, and in the case of 4D PET imaging the resolution may be limited to several minutes. === Electronic displays === In some applications, temporal resolution may instead be equated to the sampling period, or its inverse, the refresh rate, or update frequency in Hertz, of a TV, for example. The temporal resolution is distinct from temporal uncertainty. This would be analogous to conflating image resolution with optical resolution. One is discrete, the other, continuous. The temporal resolution is a resolution somewhat the 'time' dual to the 'space' resolution of an image. In a similar way, the sample rate is equivalent to the pixel pitch on a display screen, whereas the optical resolution of a display screen is equivalent to temporal uncertainty. Note that both this form of image space and time resolutions are orthogonal to measurement resolution, even though space and time are also orthogonal to each other. Both an image or an oscilloscope capture can have a signal-to-noise ratio, since both also have measurement resolution. === Oscilloscopy === An oscilloscope is the temporal equivalent of a microscope, and it is limited by temporal uncertainty the same way a microscope is limited by optical resolution. A digital sampling oscilloscope has also a limitation analogous to image resolution, which is the sample rate. A non-digital non-sampling oscilloscope is still limited by temporal uncertainty. The temporal uncertainty can be related to the maximum frequency of continuous signal the oscilloscope could respond to, called the bandwidth and given in Hertz. But for oscilloscopes, this figure is not the temporal resolution. To reduce confusion, oscilloscope manufacturers use 'Sa/s' instead of 'Hz' to specify the temporal resolution. Two cases for oscilloscopes exist: either the probe settling time is much shorter than the real time sampling rate, or it is much larger. The case where the settling time is the same as the sampling time is usually undesirable in an oscilloscope. It is more typical to prefer a larger ratio either way, or if not, to be somewhat longer than two sample periods. In the case where it is much longer, the most typical case, it dominates the temporal resolution. The shape of the response during the settling time also has as strong effect on the temporal resolution. For this reason probe leads usually offer an arrangement to 'compensate' the leads to alter the trade off between minimal settling time, and minimal overshoot. If it is much shorter, the oscilloscope may be prone to aliasing from radio frequency interference, but this can be removed by repeatedly sampling a repetitive signal and averaging the results together. If the relationship between the 'trigger' time and the sample clock can be controlled with greater accuracy than the sampling time, then it is possible to make a measurement of a repetitive waveform with much higher temporal resolution than the sample period by upsampling each record before averaging. In this case the temporal uncertainty may be limited by clock jitter.

  Read more →
• 

  List of video games using NFC

  This is a list of video games that use near field communication (NFC) technology. Currently, games have leveraged NFC in unlocking additional features through payment. This takes the form of a direct transaction over NFC or by purchasing a physical item, which signals to the platform that a certain set of features has been purchased (e.g. Skylanders). This list catalogues gaming NFC platforms by device. == Mobile == === Android === Gun Bros. Near Field Ninja NFC Cards Skylanders, with an NFC base. The Haunted House: Soul Fighters, with an NFC base. === iOS === ==== As item-triggered game enhancement ==== Skylanders, with an NFC base. ==== As payment ==== In-App Purchases Here, games that leverage Apple's In-App Purchase framework use information stored in the NFC Secure Element to process the purchase through Apple Pay. While an NFC radio is not used here, the NFC protocol is used nonetheless. == Console == === Nintendo Wii, Wii U, Switch, Switch 2, 3DS and 2DS === ==== As item-triggered game enhancement ==== Pokémon Rumble U NFC Figure Amiibo, built into Nintendo consoles since 2014. Works with Wii U, New Nintendo 3DS/3DS XL, New Nintendo 2DS XL, Nintendo Switch, Nintendo Switch 2 and older Nintendo 3DS/Nintendo 2DS systems via a peripheral device. Disney Infinity, with an NFC base. Works with Wii, Nintendo 3DS, Nintendo 2DS and Wii U. Lego Dimensions, with an NFC base. Works with Wii U. Skylanders, with an NFC base. Works with Wii, Nintendo 3DS, Nintendo 2DS and Wii U. The Nintendo Switch version of Skylanders: Imaginators uses the NFC built into the game controller, it is also has full backward compatibility with Nintendo Switch 2. Some functionalities are missing compared to the other versions. ==== As payment ==== The Wii U GamePad controller, Joy-Con R, Joy-Con 2 R, Nintendo Switch Pro Controller and Nintendo Switch 2 Pro Controller can read information from an NFC data source. === PlayStation === Disney Infinity, with an NFC base. Works with PlayStation 3, PlayStation Vita, PlayStation 4 and PlayStation 5. Lego Dimensions, with an NFC base. Works with PlayStation 3, PlayStation 4 and PlayStation 5. Skylanders, with an NFC base. Works with PlayStation 3, PlayStation 4 and PlayStation 5. === Xbox === While NFC bases are normally interoperable between all platforms, the Xbox 360, Xbox One and Xbox Series X require specific bases that are compatible only with the respective platform. Disney Infinity, with an NFC base. Lego Dimensions, with an NFC base. Skylanders, with an NFC base.

  Read more →