AI Art Filter

AI Art Filter — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Sherwood Applied Business Security Architecture

    Sherwood Applied Business Security Architecture

    SABSA (Sherwood Applied Business Security Architecture) is a model and methodology for developing a risk-driven enterprise information security architecture and service management, to support critical business processes. It was developed independently from the Zachman Framework, but has a similar structure. The primary characteristic of the SABSA model is that everything must be derived from an analysis of the business requirements for security, especially those in which security has an enabling function through which new business opportunities can be developed and exploited. The process analyzes the business requirements at the outset, and creates a chain of traceability through the strategy and concept, design, implementation, and ongoing ‘manage and measure’ phases of the lifecycle to ensure that the business mandate is preserved. Framework tools created from practical experience further support the whole methodology. The model is layered, with the top layer being the business requirements definition stage. At each lower layer a new level of abstraction and detail is developed, going through the definition of the conceptual architecture, logical services architecture, physical infrastructure architecture and finally at the lowest layer, the selection of technologies and products (component architecture). The SABSA model itself is generic and can be the starting point for any organization, but by going through the process of analysis and decision-making implied by its structure, it becomes specific to the enterprise, and is finally highly customized to a unique business model. It becomes in reality the enterprise security architecture, and it is central to the success of a strategic program of information security management within the organization. SABSA is a particular example of a methodology that can be used both for IT (information technology) and OT (operational technology) environments. == SABSA matrix == Note: The above is the original SABSA Matrix, which is still valid today, but it has been expanded by a comprehensive service management matrix and updated in some detail and terminology areas. In the words of David Lynas, SABSA author, "The SABSA Matrix and the SABSA Service Management Matrix have not been updated since the late 90s. We have redesigned them to deliver the improvements your feedback has requested over the years. We have not fundamentally changed the structure or principles of the matrices (very few elements have changed position) but have focused on terminology update and consistency." The new versions can be downloaded (along with the 2009 revision of the SABSA White Paper and other important documents like the SABSA Certification Roadmap) at the SABSA Members' Web Site.

    Read more →
  • Metadatabase

    Metadatabase

    Metadatabase is a database model for (1) metadata management, (2) global query of independent databases, and (3) distributed data processing. The word metadatabase is an addition to the dictionary. Originally, metadata was only a common term referring simply to "data about data", such as tags, keywords, and markup headers. However, in this technology, the concept of metadata is extended to also include such data and knowledge representation as information models (e.g., relations, entities-relationships, and objects), application logic (e.g., production rules), and analytic models (e.g., simulation, optimization, and mathematical algorithms). In the case of analytic models, it is also referred to as a Modelbase. These classes of metadata are integrated with some modeling ontology to give rise to a stable set of meta-relations (tables of metadata). Individual models are interpreted as metadata and entered into these tables. As such, models are inserted, retrieved, updated, and deleted in the same manner as ordinary data do in an ordinary (relational) database. Users will also formulate global queries and requests for processing of local databases through the Metadatabase, using the globally integrated metadata. The Metadatabase structure can be implemented in any open technology for relational databases. == Significance == The Metadatabase technology is developed at Rensselaer Polytechnic Institute at Troy, New York, by a group of faculty and students (see the references at the end of the article), starting in late 1980s. Its main contribution includes the extension of the concept of metadata and metadata management, and the original approach of designing a database for metadata applications. These conceptual results continue to motivate new research and new applications. At the level of particular design, its openness and scalability is tied to that of the particular ontology proposed: It requires reverse-representation of the application models in order to save them into the meta-relations. In theory, the ontology is neutral, and it has been proven in some industrial applications. However, it needs more development to establish it for the field as an open technology. The requirement of reverse-representation is common to any global information integration technology. A way to facilitate it in the Metadatabase approach is to distribute a core portion of it at each local site, to allow for peer-to-peer translation on the fly.

    Read more →
  • Starlight Information Visualization System

    Starlight Information Visualization System

    Starlight is a software product originally developed at Pacific Northwest National Laboratory and now by Future Point Systems. It is an advanced visual analysis environment. In addition to using information visualization to show the importance of individual pieces of data by showing how they relate to one another, it also contains a small suite of tools useful for collaboration and data sharing, as well as data conversion, processing, augmentation and loading. The software, originally developed for the intelligence community, allows users to load data from XML files, databases, RSS feeds, web services, HTML files, Microsoft Word, PowerPoint, Excel, CSV, Adobe PDF, TXT files, etc. and analyze it with a variety of visualizations and tools. The system integrates structured, unstructured, geospatial, and multimedia data, offering comparisons of information at multiple levels of abstraction, simultaneously and in near real-time. In addition Starlight allows users to build their own named entity-extractors using a combination of algorithms, targeted normalization lists and regular expressions in the Starlight Data Engineer (SDE). As an example, Starlight might be used to look for correlations in a database containing records about chemical spills. An analyst could begin by grouping records according to the cause of the spill to reveal general trends. Sorting the data a second time, they could apply different colors based on related details such as the company responsible, age of equipment or geographic location. Maps and photographs could be integrated into the display, making it even easier to recognize connections among multiple variables. Starlight has been deployed to both the Iraq and Afghanistan wars and used on a number of large-scale projects. PNNL began developing Starlight in the mid-1990s, with funding from the Land Information Warfare Agency, a part of the Army Intelligence and Security Command and continued developed at the laboratory with funding from the NSA and the CIA. Starlight integrates visual representations of reports, radio transcripts, radar signals, maps and other information. The software system was recently honored with an R&D 100 Award for technical innovation. In 2006 Future Point Systems, a Silicon Valley startup, acquired rights to jointly develop and distribute the Starlight product in cooperation with the Pacific Northwest National Laboratory. The software is now also used outside of the military/intelligence communities in a number of commercial environments.

    Read more →
  • Glossary of computer graphics

    Glossary of computer graphics

    This is a glossary of terms relating to computer graphics. For more general computer hardware terms, see glossary of computer hardware terms. == 0–9 == 2D convolution Operation that applies linear filtering to image with a given two-dimensional kernel, able to achieve e.g. edge detection, blurring, etc. 2D image 2D texture map A texture map with two dimensions, typically indexed by UV coordinates. 2D vector A two-dimensional vector, a common data type in rasterization algorithms, 2D computer graphics, graphical user interface libraries. 2.5D Also pseudo 3D. Rendering whose result looks 3D while actually not being 3D or having great limitations, e.g. in camera degrees of freedom. 3D graphics pipeline A graphics pipeline taking 3D models and producing a 2D bitmap image result. 3D paint tool A 3D graphics application for digital painting of multiple texture map image channels directly onto a rotated 3D model, such as zbrush or mudbox, also sometimes able to modify vertex attributes. 3D scene A collection of 3D models and lightsources in world space, into which a camera may be placed, describing a scene for 3D rendering. 3D unit vector A unit vector in 3D space. 4D vector A common datatype in graphics code, holding homogeneous coordinates or RGBA data, or simply a 3D vector with unused W to benefit from alignment, naturally handled by machines with 4-element SIMD registers. 4×4 matrix A matrix commonly used as a transformation of homogeneous coordinates in 3D graphics pipelines. 7e3 format A packed pixel format supported by some graphics processing units (GPUs) where a single 32-bit word encodes three 10-bit floating-point color channels, each with seven bits of mantissa and three bits of exponent. == A == AABB Axis-aligned bounding box (sometimes called "axis oriented"), a bounding box stored in world coordinates; one of the simplest bounding volumes. Additive blending A compositing operation where d s t = d s t + s r c , {\displaystyle dst=dst+src,} without the use of an alpha channel, used for various effects. Also known as linear dodge in some applications. Affine texture mapping Linear interpolation of texture coordinates in screen space without taking perspective into account, causing texture distortion. Aliasing Unwanted effect arising when sampling high-frequency signals, in computer graphics appearing e.g. when downscaling images. Antialiasing methods can prevent it. Alpha channel An additional image channel (e.g. extending an RGB image) or standalone channel controlling alpha blending. Ambient lighting An approximation to the light entering a region from a wide range of directions, used to avoid needing an exact solution to the rendering equation. Ambient occlusion (AO) Effect approximating, in an inexpensive way, one aspect of global illumination by taking into account how much ambient light is blocked by nearby geometry, adding visual clues about the shape. Analytic model A mathematical model for a phenomenon to be simulated, e.g. some approximation to surface shading. Contrasts with Empirical models based purely on recorded data. Anisotropic filtering Advanced texture filtering improving on mipmapping, preventing aliasing while reducing blur in textured polygons at oblique angles to the camera. Anti-aliasing Methods for filtering and sampling to avoid visual artifacts associated with the uniform pixel grid in 3D rendering. Array texture A form of texture map containing an array of 2D texture slices selectable by a 3rd 'W' texture coordinate; used to reduce state changes in 3D rendering. Augmented reality Computer-rendered content inserted into the user's view of the real world. AZDO Approaching zero driver overhead, a set of techniques aimed at reducing the CPU overhead in preparing and submitting rendering commands in the OpenGL pipeline. A compromise between the traditional GL API and other high-performance low-level rendering APIs. == B == Back-face culling Culling (discarding) of polygons that are facing backwards from the camera. Baking Performing an expensive calculation offline, and caching the results in a texture map or vertex attributes. Typically used for generating lightmaps, normal maps, or low level of detail models. Barycentric coordinates Three-element coordinates of a point inside a triangle. Beam tracing Modification of ray tracing which instead of lines uses pyramid-shaped beams to address some of the shortcomings of traditional ray tracing, such as aliasing. Bicubic interpolation Extension of cubic interpolation to 2D, commonly used when scaling textures. Bilinear interpolation Linear interpolation extended to 2D, commonly used when scaling textures. Binding Selecting a resource (texture, buffer, etc.) to be referenced by future commands. Billboard A textured rectangle that keeps itself oriented towards the camera, typically used e.g. for vegetation or particle effects. Binary space partitioning (BSP) A data structure that can be used to accelerate visibility determination, used e.g. in Doom engine. Bit depth The number of bits per pixel, sample, or texel in a bitmap image (holding one or more image channels, typical values being 4, 8, 16, 24, 32) Bitmap Image stored by pixels. Bit plane A format for bitmap images storing 1 bit per pixel in a contiguous 2D array; Several such parallel arrays combine to produce the a higher-bit-depth image. Opposite of packed-pixel format. Blend operation A render state controlling alpha blending, describing a formula for combining source and destination pixels. Bone Coordinate systems used to control surface deformation (via Weight maps) during skeletal animation. Typically stored in a hierarchy, controlled by key frames, and other procedural constraints. Bounding box One of the simplest type of bounding volume, consisting of axis-aligned or object-aligned extents. Bounding volume A mathematically simple volume, such as a sphere or a box, containing 3D objects, used to simplify and accelerate spatial tests (e.g. for visibility or collisions). BRDF Bidirectional reflectance distribution functions (BRDFs), empirical models defining 4D functions for surface shading indexed by a view vector and light vector relative to a surface. Bump mapping Technique similar to normal mapping that instead of normal maps uses so called bump maps (height maps). BVH Bounding volume hierarchy is a tree structure on a set of geometric objects. == C == Camera A virtual camera from which rendering is performed, also sometimes referred to as 'eye'. Camera space A space with the camera at the origin, aligned with the viewer's direction, after the application of the world transformation and view transformation. Cel shading Cartoon-like shading effect. Clipping Limiting specific operations to a specific region, usually the view frustum. Clipping plane A plane used to clip rendering primitives in a graphics pipeline. These may define the view frustum or be used for other effects. Clip space Coordinate space in which clipping is performed. Clip window A rectangular region in screen space, used during clipping. A clip window may be used to enclose a region around a portal in portal rendering. CLUT A table of RGB color values to be indexed by a lower-bit-depth image (typically 4–8 bits), a form of vector quantization. Color bleeding Unwanted effect in texture mapping. A color from a border of unmapped region of the texture may appear (bleed) in the mapped result due to interpolation. Color channels The set of channels in a bitmap image representing the visible color components, i.e. distinct from the alpha channel or other information. Color resolution Command buffer A region of memory holding a set of instructions for a graphics processing unit for rendering a scene or portion of a scene. These may be generated manually in bare metal programming, or managed by low level rendering APIs, or handled internally by high level rendering APIs. Command list A group of rendering commands ready for submission to a graphics processing unit, see also Command buffer. Compute API An API for efficiently processing large amounts of data. Compute shader A compute kernel managed by a rendering API, with easy access to rendering resources. Cone tracing Modification of ray tracing which instead of lines uses cones as rays in order to achieve e.g. antialiasing or soft shadows. Connectivity information Indices defining [rendering primitive]s between vertices, possibly held in index buffers. describes geometry as a graph or hypergraph. CSG Constructive solid geometry, a method for generating complex solid models from boolean operations combining simpler modelling primitives. Cube mapping A form of environment reflection mapping in which the environment is captured on a surface of a cube (cube map). Culling Before rendering begins, culling removes objects that don't significantly contribute to the rendered result (e.g. being obscured or outside camera view). == D == Decal A "sticker" picture applied onto a surface (e.g. a

    Read more →
  • Croissant (metadata format)

    Croissant (metadata format)

    Croissant is a metadata format design to support sharing of datasets for machine learning applications. It is a platform-agnostic schema used to standardize metadata in data repositories like Hugging Face, kaggle, Dataverse and OpenML. == Structure == Croissant builds upon schema.org, uses primarily JSON-LD, and divides metadata in four "layers": Dataset Metadata, Resource, Structure and Semantic: The Dataset Metadata layer constrains which schema.org properties should be used, including additional properties, linking together the resources (files) of the dataset with general metadata, like licensing and citation information. The Resource layer describes the individual files and sets of those using two new classes, FileObject and FileSet. A FileSet may be a collection of related images. The Structure layer specifies how the files are organized in the dataset. A RecordSet class describes how resources are present, configurations that may very a lot between modality. This specification facilitates interoperability of the datasets. Finally, the Semantic layer adds information for practical reuse of the dataset, such as splits for train, test and validation subsets. It also provides a default extension for metadata related to responsible AI. The use of a standard machine-readable structure increases, for example, the discoverability of datasets in search engines such as Google Dataset Search. == History == Croissant was shared in arXiv in March 2024 and published in the proceedings of NeurIPS 2024. It started as community driven as a MLCommons Croissant Working Group, including stakeholders organizations from academia and industry, including Google, the open data institute, Sage Bionetworks and King's College London. Variations of Croissant are developed to support datasets in different areas of research, such as Geo-Croissant for geospatial datasets. Other technical extensions, such as support for RDF, soon followed.

    Read more →
  • TikTok

    TikTok

    TikTok is a social media and short-form online video platform. It hosts user-submitted videos, which range in duration from three seconds to 60 minutes. It can be accessed through a mobile app or through its website. Since its launch, TikTok has become one of the world's most popular social media platforms, using recommendation algorithms to connect content creators and influencers with new audiences. In April 2020, TikTok surpassed two billion mobile downloads worldwide. The popularity of TikTok has allowed viral trends in food, fashion, and music to take off and increase the platform's cultural impact worldwide. TikTok has come under scrutiny due to data privacy violations, mental health concerns, misinformation, offensive content, addictive algorithm, its role during the Gaza war, and, following its 2026 divestiture in the U.S., alleged censorship of criticism of Donald Trump and discussions of Jeffrey Epstein. While TikTok remains accessible to users in most countries, a minority of countries (including India and Afghanistan) have implemented full or partial bans. Many other countries limit TikTok's use on government-issued devices for security or privacy reasons. == Corporate structure == TikTok Ltd was incorporated in the Cayman Islands in the Caribbean and is based in both Singapore and Los Angeles. It owns entities which are based respectively in Australia (which also runs the New Zealand business), United Kingdom (also owns subsidiaries in the European Union), and Singapore (owns operations in Southeast Asia and India). A spin-off company, TikTok USDS Joint Venture LLC was formed on 22 January 2026 to handle TikTok and other ByteDance properties in the United States, Oracle Corporation, MGX Fund Management Limited, Silver Lake each holding a 15% stake, ByteDance holds a 19.9% stake and the remaining 35.1% is shared between Dell Technologies founder Michael Dell and Vastmere Strategic Investments. Its parent company, Beijing-based ByteDance, is owned by founders and Chinese investors, other global investors, and employees. One of ByteDance's main domestic subsidiaries is owned by Chinese state funds and entities through a 1% golden share. Employees have reported that multiple overlaps exist between TikTok and ByteDance in terms of personnel management and product development. TikTok says that since 2020, its US-based CEO is responsible for making important decisions, and has downplayed its China connection. == History == === Douyin === Douyin (Chinese: 抖音; pinyin: Dǒuyīn; lit. 'Shaking Sound') was launched on 20 September 2016, by ByteDance, originally under the name A.me, before changing its name to Douyin in December 2016. Douyin was developed in nearly 7 months and within a year had 100 million users, with more than one billion videos viewed every day. While TikTok and Douyin share a similar user interface, the platforms operate separately. Douyin includes an in-video search feature that can search by people's faces for more videos of them, along with other features such as buying, booking hotels, and making geo-tagged reviews. === TikTok === ByteDance planned on Douyin expanding overseas. The founder of ByteDance, Zhang Yiming, stated that "China is home to only one-fifth of Internet users globally. If we don't expand on a global scale, we are bound to lose to peers eyeing the four-fifths. So, going global is a must." ByteDance created TikTok as an overseas version of Douyin. TikTok was launched in the international market in September 2017. On 9 November 2017, ByteDance spent nearly $1 billion to purchase Musical.ly, a startup headquartered in Shanghai with an overseas office in Santa Monica, California. Musical.ly was a social media video platform that allowed users to create short lip-sync and comedy videos, initially released in August 2014. TikTok merged with Musical.ly on 2 August 2018 with existing accounts and data consolidated into one app, keeping the title TikTok. On 23 January 2018, the TikTok app ranked first among free application downloads on app stores in Thailand and other countries. TikTok has been downloaded more than 130 million times in the United States and has reached 2 billion downloads worldwide, according to data from mobile research firm Sensor Tower (those numbers exclude Android users in China). In the United States, Jimmy Fallon, Tony Hawk, and other celebrities began using the app in 2018. Other celebrities like Jennifer Lopez, Jessica Alba, Will Smith, and Justin Bieber joined TikTok. In January 2019, TikTok allowed creators to embed merchandise sale links into their videos. On 3 September 2019, TikTok and the US National Football League (NFL) announced a multi-year partnership. The agreement came just two days before the NFL's 100th season kick-off at Soldier Field in Chicago where TikTok hosted activities for fans in honor of the deal. The partnership entails the launch of an official NFL TikTok account, which is to bring about new marketing opportunities such as sponsored videos and hashtag challenges. In July 2020, TikTok, excluding Douyin, reported close to 800 million monthly active users worldwide after less than four years of existence. In May 2021, TikTok appointed Shou Zi Chew as their new CEO who assumed the position from interim CEO Vanessa Pappas, following the resignation of Kevin A. Mayer on 27 August 2020. In September 2021, TikTok reported that it had reached 1 billion users. In 2021, TikTok earned $4 billion in advertising revenue. In October 2022, TikTok was reported to be planning an expansion into the e-commerce market in the US, following the launch of TikTok Shop in the United Kingdom. The company posted job listings for staff for a series of order fulfillment centers in the US and was reportedly planning to start the new live shopping business before the end of the year. The Financial Times reported that TikTok will launch a video gaming channel, but the report was denied in a statement to Digiday, with TikTok instead aiming to be a social hub for the gaming community. According to data from app analytics group Sensor Tower, advertising on TikTok in the US grew by 11% in March 2023, with companies including Pepsi, DoorDash, Amazon, and Apple among the top spenders. According to estimates from research group Insider Intelligence, TikTok is projected to generate $14.15 billion in revenue in 2023, up from $9.89 billion in 2022. In March 2024, The Wall Street Journal reported that TikTok's growth in the US had stagnated. ==== Plans to sell TikTok's US operations ==== Since at least 2020, following calls to ban TikTok in the country, the Committee on Foreign Investment in the United States (CFIUS) has been investigating the company's 2017 merger with Musical.ly but has not finalized any of its negotiations with TikTok, such as the Project Texas proposal, waiting instead for Congress to act. In January 2025, Chinese officials began preliminary talks about potentially selling TikTok's US operations to Elon Musk if the app faced an impending ban due to national security concerns. While Beijing preferred TikTok remain under ByteDance's control, the sale could happen through a competitive process or with US government involvement. One possibility involved Musk's platform, X, taking over TikTok's US business. The move came ahead of a Supreme Court case that upheld the constitutionality of a law that would force a sale or ban of TikTok in the US by 19 January 2025, due to national security concerns regarding its ties to China. Other potential buyers included Project Liberty's "The People's Bid For TikTok" consortium of Frank McCourt with Kevin O'Leary, Steven Mnuchin, MrBeast and Bobby Kotick, the seriousness of these potential buyers was unclear. The day before the impending ban, California-based conversational search engine company Perplexity AI submitted a bid for a merger with TikTok US. On 14 September 2025, the Wall Street Journal reported the US and China have reached the "framework of a deal" for the US operations of TikTok to be sold to a consortium of investors in the US including close Trump ally Larry Ellison of Oracle. The deal was completed by 22 January 2026, with a consortium of investors—including Oracle, Silver Lake, MGX, and others including the personal investment entity for Michael Dell—owning more than 80% of the new venture. ByteDance retained 19.9% ownership. Under the deal, the app would remain the same, and the algorithm would be adjusted over time to favor American topics for those users. === Expansion in other markets === TikTok was downloaded over 104 million times on Apple's App Store during the first half of 2018, according to data provided to CNBC by Sensor Tower. After merging with musical.ly in August, downloads increased and TikTok subsequently became the most downloaded app in the US in October 2018, which musical.ly had done once before. In February 2019, TikTok, together with Douyin, hit one billion downloads globally, excluding Android

    Read more →
  • Gas (app)

    Gas (app)

    Gas (sometimes stylized in all caps), formerly known as Melt as well as Crush, was an American anonymous social media app. Launched in August 2022, the app is oriented towards high schoolers. The app was developed by Nikita Bier, Isaiah Turner, and former Facebook engineer Dave Schatz. Gas was largely based upon the prior tbh app developed by co-founder Nikita Bier, along with Erik Hazzard, Kyle Zaragoza, and Nicolas Ducdodon in September 2017. tbh was acquired by Facebook inc. (now Meta Platforms) on October 16, 2017, and nearly a year later in July 2018 was dissolved, owing to low usage. Gas follows a similar purpose to tbh in being a social media app oriented towards high schoolers. In the app, users participate in anonymous polls regarding pre-written complimentary statements to their peers, such as "I'd say yes if (blank) asked me out on a date," "I think (blank) is the coolest kid in school," or "would make an ugly face and still look pretty." Winners of said polls receive a "flame." The name of the app is derived from this, with "gassing someone up" being Gen Z slang for complimenting someone. Users can pay a $6.99 subscription that enables "God Mode," which shows hints regarding who voted for them in a poll. Gas overtook TikTok and BeReal as the most downloaded app on the Apple App Store in October 2022 (the app is currently not available for Android). The app has over 5.1 million downloads as of early November 2022, over a million active users and 300 thousand daily downloads as of October 2022. Currently, the app is available in Canada and the majority of the United States. On January 17, 2023, Gas was acquired by Discord, however it would remain a standalone app and its developers became Discord staff members. On October 18, 2023, Discord announced that service for Gas would be permanently ending effective November 7, 2023, due to a steep decline in users. Effective November 7, the app became completely unusable. == Controversy regarding human-trafficking == Beginning in October 2022, rumors spread largely throughout TikTok and Snapchat alleged that the app was linked to human trafficking (in particular sex trafficking). According to Bier, the rumor originated with a single user review from China on October 5, and then was disseminated through TikTok accounts with "few to no US teen followers." Although largely dismissed as a hoax by experts, who cite how the app doesn't log user locations and general anonymity, the hoax became pervasive to the extent that various police departments, school systems, and local news outlets began issuing warnings regarding the app. For instance, on October 31, 2022, the police department of Piedmont, Oklahoma issued a warning to parents, encouraging them to check their children's phones, while on November 3, the Oklahoma Oktaha Public School system stated in a Facebook post that "Children are being kidnapped in other towns and this new app is thought to be the source of predators finding their location." (both statements have since been retracted by Police Chief Scott Singer and Superintendent Jerry Needham respectively). Additionally, local medial outlets such as KOCO in Oklahoma City ran stories making similar statements. The rumor had a negative impact on the app, with downloads plateauing for a two-week period in late October and with 3% of users in a single day reportedly uninstalling the app. Revenue and ratings have also reportedly dropped and the company's social media accounts have been bombarded with comments labeling them as sex-traffickers. Additionally, the four-person development team has reportedly been bombarded with various death threats as a result.

    Read more →
  • List of software palettes

    List of software palettes

    This is a list of software palettes used by computers. Systems that use a 4-bit or 8-bit pixel depth can display up to 16 or 256 colors simultaneously. Many personal computers in the early 1990s displayed at most 256 different colors, freely selected by software (either by the user or by a program) from their wider hardware's RGB color palette. Usual selections of colors in limited subsets (generally 16 or 256) of the full palette includes some RGB level arrangements commonly used with the 8-bit palettes as master palettes or universal palettes (i.e., palettes for multipurpose uses). These are some representative software palettes, but any selection can be made in such of systems. For specific hardware color palettes, see the list of monochrome and RGB palettes, list of 8-bit computer hardware graphics, the list of 16-bit computer hardware graphics and the list of video game console palettes articles. Each palette is represented by an array of color patches. A one-pixel size version appears below each palette, to make it easy to compare palette sizes. For each unique palette, an image color test chart and sample image (truecolor original follows) rendered with that palette (without dithering) are given. The test chart shows the full 8-bit, 256 levels of the red, green, and blue (RGB) primary colors and cyan, magenta, and yellow complementary colors, along with a full 8-bit, 256 levels grayscale. Gradients of RGB intermediate colors (orange, lime green, sea green, sky blue, violet and fuchsia), and a full hue spectrum are also present. Color charts are not gamma corrected. These elements illustrate the color depth and distribution of the colors of any given palette, and the sample image indicates how the color selection of such palettes could represent real-life images. == System specifics == These are selections of colors officially employed as system palettes in some popular operating systems for personal computers that support 8-bit displays. === Microsoft Windows and IBM OS/2 default 16-color palette === Used by these platforms as a roughly backward compatible palette for the CGA, EGA and VGA text modes, but with colors arranged in a different order. Also, is the default palette for 16 color icons. The corresponding indices into this palette are: === Microsoft Windows default 20-color palette === In 256-color mode, there are four additional standard Windows colors, twenty system reserved colors in total; thus the system leaves 236 palette indexes free for applications to use. The system color entries inside a 256-color palette table are the first ten plus the last ten. In any case, the additional system colors do not seem to add a sharp color richness: they are only some intermediate shades of grayish colors. Since Windows 95, these additional colors can be changed by the system when a color scheme needs custom colors, reducing their utility as static, unchanging palette entries. The complete 20-color Windows system palette is: === Apple Macintosh default 16-color palette === When Apple Computer introduced the Macintosh II in 1987, this 16-color palette was included in System 4.1. === RISC OS default palette === Acorn RISC OS 2.x and 3.x provided this 16-color palette: === Solaris default 16-color palette === Solaris OS used this color palette: == RGB arrangements == These are selections of colors based in evenly ordered RGB levels which provide complete RGB combinations, mainly used as master palettes to display any kind of image within the limitations of the 8-bit pixel depth. === 6 level RGB === Having six levels for every primary, with 6³ = 216 combinations. The index can be addressed by (36×R)+(6×G)+B, with all R, G and B values in a range from 0 to 5. Intended as homogeneous RGB cube, it gives six true grays. Also, there is room for another sorts of 40 colors, so operating systems or programs can add extra colors. Systems that use this software palette are: Web-safe colors Apple Macintosh 256 color default palette. It also contains four gradients of ten shades each for gray, red, green and blue. === 6-7-6 levels RGB === This palette is constructed with six levels for red and blue primaries and seven levels for the green primary, giving 6×7×6 = 252 combinations. The index can be addressed by (42×R)+(6×G)+B, with R and B values in a range from 0 to 5 and G in a range from 0 to 6. The same case as the former, but with an added level of green due to the greater sensibility of the normal human eye to this frequency. It does not provide true grays, but remaining indexes can be filled with four intermediate grays. In any case, there is little room for any other color. === 6-8-5 levels RGB === This palette is constructed with six levels for red, eight levels for green and five levels for the blue primaries, giving 6×8×5 = 240 combinations. The index can be addressed by (40×R)+(5×G)+B, with R ranging from 0 to 5, G from 0 to 7 and B from 0 to 4. Levels are chosen in function of sensibility of the normal human eye to every primary color. Also, it does not provide true grays. Remaining indexes can be filled with sixteen intermediate grays or other fixed colors. In fact, this is the best balanced RGB master software palette, in a compromise between the RGB arrangement based in the human eye's sensibility and a sufficient remaining palette entries for another purposes. === 8-8-4 levels RGB === The 8-8-4 level RGB use eight levels for each of the red and green color components (3+3 high order bits), and four levels (2 low order bits) for the blue component, due to the lesser sensitivity of the normal human eye to this primary color. This results in an 8×8×4 = 256-color palette as follows: This RGB software palette occupies the full 8-bit range of possible palette entries, so there is no room for other fixed colors. Software using this palette must draw their user interface elements with the same colors used to show pictures. Also again, it does not provide true grays. == Other common uses of software palettes == === Grayscale palettes === Simple palette made doing every triplet RGB primaries having equal values as a continuous gradient from black to white through the full available palette entries. Here is the 8-bit, 256 levels palette: Used to display pure grayscale TIFF or JPEG images, for example. === Color gradient palettes === Palettes made of a continuous color gradient from darkest to lightest arbitrary hues. The pixel data is treated as if it were grayscale, but the color table plays with RGB color combinations, not only gray. The relationship between the original luminance and the mapped one can vary, but the lighting scale is preserved along all the palette entries. One very common case of such palettes is the sepia tone palette, which gives an image an old fashioned and aged look (left). Another gradient example, based on blue hues, is presented here (right), but any hue or mixing of hues can be used. Many cell phones with built-in cameras have options to take colorized photos using this technique. === Adaptive palettes === Those whose whole number of available indexes are filled with RGB combinations selected from the statistical order of appearance (usually balanced) of a concrete full true color original image. There exist many algorithms to pick the colors through color quantization; one well known is the Heckbert's median-cut algorithm. Here is the 8-bit, 256 color palette used with the color test chart and the image sample above: Adaptive palettes only work well with a unique image. Trying to display different images with adaptive palettes over an 8-bit display usually results in only one image with correct colors, because the images have different palettes and only one can be displayed at a time. Here is an example of what happens when an indexed color image is displayed with any color palette that is not its own adaptive palette: === False color palettes === Arbitrary gradient color scales, usually 256 shades, with no relationship with real colors of a given image. They are employed to artificially colorize a grayscale image to reveal details and/or to map the pixel level values to amounts of some physical magnitude (potential, temperature, altitude, etc.) Note, in the example above, that new details can be seen as blue over magenta in the background's dark areas of the original photograph. Here is the 8-bit, 256 color gradient palette used with the color test chart and the image sample above: There exist many false color palettes, some of them standardized, used mainly in scientific applications: astronomy and radioastronomy, satellite land imaging, thermography, study of materials, tomography and magnetic resonance imaging in medicine, etc.

    Read more →
  • Color histogram

    Color histogram

    In image processing and photography, a color histogram is a representation of the distribution of colors in an image. For digital images, a color histogram represents the number of pixels that have colors in each of a fixed list of color ranges that span the image's color space (the set of all possible colors). A color histogram can be built for any kind of color space, although the term is more often used for three-dimensional spaces such as RGB or HSV. For monochromatic images, the term intensity histogram may be used instead. For multi-spectral images, where each pixel is represented by an arbitrary number of measurements (for example, beyond the three measurements in RGB), a color histogram is N-dimensional, with N being the number of measurements taken. Each measurement has its own wavelength range of the light spectrum, some of which may be outside the visible spectrum. If the set of possible color values is sufficiently small, each of those colors may be placed on a range by itself; then the histogram is merely the count of pixels that have each possible color. Most often, the space is divided into an appropriate number of ranges, often arranged as a regular grid, each containing many similar color values. A color histogram may also be represented and displayed as a smooth function defined over the color space that approximates the pixel counts. Like other kinds of histograms, a color histogram is a statistic that can be viewed as an approximation of an underlying continuous distribution of color values. == Overview == Color histograms are flexible constructs that can be built from images in various color spaces, whether RGB, rg chromaticity or any other color space of any dimension. A histogram of an image is produced first by discretization of the colors in the image into a number of bins, and counting the number of image pixels in each bin. For example, a red–blue chromaticity histogram can be formed by first normalizing color pixel values by dividing RGB values by R+G+B, then quantizing the normalized R and B coordinates into N bins each. A two-dimensional histogram of red–blue chromaticity divided into four bins (N=4) may yield a histogram similar to this table: A histogram can be N-dimensional. Although harder to display, a three-dimensional color histogram for the above example could be thought of as four separate red–blue histograms, where each of the four histograms contains the red–blue values for a bin of green (0–63, 64–127, 128–191, and 192–255). The histogram provides a compact summarization of the distribution of data in an image. A color histogram of an image is relatively invariant with translation and rotation about the viewing axis, and varies only slowly with the angle of view. By comparing histogram signatures of two images and matching the color content of one image with the other, a color histogram is particularly well suited for the problem of recognizing an object of unknown position and rotation within a scene. Importantly, translation of an RGB image into the illumination invariant rg-chromaticity space allows the histogram to operate well in varying light levels. 1. What is a histogram? A histogram is a graphical representation of the number of pixels in an image. In a more simple way to explain, a histogram is a bar graph, whose X-axis represents the tonal scale (black at the left and white at the right), and Y-axis represents the number of pixels in an image in a certain area of the tonal scale. For example, the graph of a luminance histogram shows the number of pixels for each brightness level (from black to white), and when there are more pixels, the peak at the certain luminance level is higher. 2. What is a color histogram? A color histogram of an image represents the distribution of the composition of colors in the image. It shows different types of colors appeared and the number of pixels in each type of the colors appeared. The relation between a color histogram and a luminance histogram is that a color histogram can be also expressed as “three luminance histograms”, each of which shows the brightness distribution of each individual red/green/blue color channel. == Characteristics of a color histogram == A color histogram focuses only on the proportion of the number of different types of colors, regardless of the spatial location of the colors. The values of a color histogram are from statistics. They show the statistical distribution of colors and the essential tone of an image. In general, as the color distributions of the foreground and background in an image are different, there might be a bimodal distribution in the histogram. For the luminance histogram alone, there is no perfect histogram and in general, the histogram can tell whether it is over-exposure or not, but there are times when you might think the image is over exposed by viewing the histogram; however, in reality it is not. == Principles of the formation of a color histogram == The formation of a color histogram is rather simple. From the definition above, we can simply count the number of pixels for each 256 scales in each of the 3 RGB channel, and plot them on 3 individual bar graphs. In general, a color histogram is based on a certain color space, such as RGB or HSV. When we compute the pixels of different colors in an image, if the color space is large, then we can first divide the color space into certain numbers of small intervals. Each of the intervals is called a bin. This process is called color quantization. Then, by counting the number of pixels in each of the bins, we get a color histogram of the image. The concrete steps of the principles can be viewed in Example 1. == Examples == === Example 1 === Given the following image of a cat (an original version and a version that has been reduced to 256 colors for easy histogram purposes), the following data represents a color histogram in the RGB color space, using four bins. Bin 0 corresponds to intensities 0–63 Bin 1 is 64–127 Bin 2 is 128–191 and Bin 3 is 192–255. === Example 2 === Application in camera: Nowadays, some cameras have the ability to show the 3 color histograms when we take photos. We can examine clips (spikes on either the black or white side of the scale) in each of the 3 RGB color histograms. If we find one or more clipping on a channel of the 3 RGB channels, then this would result in a loss of detail for that color. To illustrate this, consider this example: We know that each of the three R, G, B channels has a range of values from 0 to 255 (8 bit). So consider a photo that has a luminance range of 0–255. Assume the photo we take is made of 4 blocks that are adjacent to each other and we set the luminance scale for each of the 4 blocks of original photo to be 10, 100, 205, 245. Thus, the image looks like the topmost figure on the right. Then, we overexpose the photo a little, say, the luminance scale of each block is increased by 10. Thus, the luminance scale for each of the 4 blocks of new photo is 20, 110, 215, 255. Then, the image looks like the second figure on the right. There is not much difference between both figures, all we can see is that the whole image becomes brighter (the contrast for each of the blocks remain the same). Now, we overexpose the original photo again, this time the luminance scale of each block is increased by 50. Thus, the luminance scale for each of the 4 blocks of the new photo is 60, 150, 255, 255. The new image now looks like the third figure on the right. Note that the scale for the last block is 255 instead of 295, for 255 is the top scale and thus the last block has clipped. When this happens, we lose the contrast of the last 2 blocks, and thus we cannot recover the image no matter how we adjust it. To conclude, when taking photos with a camera that displays histograms, always keep the brightest tone in the image below the largest scale 255 on the histogram in order to avoid losing details. == Drawbacks and other approaches == The main drawback of histograms for classification is that the representation is dependent on the color of the object being studied, ignoring its shape and texture. Color histograms can potentially be identical for two images with different object content which happens to share color information. Conversely, without spatial or shape information, similar objects of different color may be indistinguishable based solely on color histogram comparisons. There is no way to distinguish a red and white cup from a red and white plate. Put it another way: histogram-based algorithms have no concept of a generic 'cup', and a model of a red and white cup is no use when given an otherwise identical blue and white cup. Another problem is that color histograms have high sensitivity to noisy interference such as lighting intensity changes and quantization errors. High dimensionality (bins) color histograms are also another issue. Some color histogram feature spaces often occupy more than one hundred di

    Read more →
  • Database dump

    Database dump

    A database dump contains a record of the table structure and/or the data from a database and is usually in the form of a list of SQL statements ("SQL dump"). A database dump is most often used for backing up a database so that its contents can be restored in the event of data loss. Corrupted databases can often be recovered by analysis of the dump. Database dumps are often published by free content projects, to facilitate reuse, forking, offline use, and long-term digital preservation. Dumps can be transported into environments with Internet blackouts or otherwise restricted Internet access, as well as facilitate local searching of the database using sophisticated tools such as grep.

    Read more →
  • Webull

    Webull

    Webull Corporation, often stylized as simply Webull, is a U.S.-based financial services holding company headquartered in St. Petersburg, Florida. It owns and operates the Webull electronic trading platform for self-directed retail investors. Depending on jurisdiction, the Webull platform offers trading in stocks, exchange-traded funds (ETFs), options, margin, bonds, cryptocurrency and futures, as well as market-data tools. Webull began operations in 2016 under Hunan Fumi Information Technology, a China-based financial technology company founded by Wang Anquan. It launched U.S. brokerage services through Webull Financial LLC in 2018 and expanded during the retail-trading boom of 2020 and 2021. In April 2025, Webull became a publicly traded company on the Nasdaq through a merger with special-purpose acquisition company SK Growth Opportunities Corporation. The company's U.S. brokerage revenue relies substantially on payment for order flow, with options trading accounting for the larger share of its order-flow rebates in 2025. Webull has faced regulatory actions related to options customer approvals, complaint handling, suspicious activity reporting, social-media marketing and customer disclosures. It has also faced scrutiny from U.S. lawmakers and state officials over its historical and operational ties to China and the handling of U.S. customer data. == History == === Founding === Webull was founded in 2016 under Hunan Fumi Information Technology, a China-based financial technology company, by Wang Anquan, a former employee of Alibaba Group and Xiaomi. Hunan Fumi Information Technology received backing from Xiaomi, Shunwei Capital, and other investors in China. Fumi Technology was a Hunan-based fintech start-up incubated by Xiaomi and raised about CNY200 million (approximately US$30 million) in a Series B financing round in 2018. On May 24, 2017, Webull Financial LLC was established as a Delaware limited liability company. It began offering brokerage services in the United States in May 2018. Wang hired Anthony Denier as CEO of the U.S. brokerage that year and the two mapped out their strategy on napkins at a Mexican restaurant in New York City. Webull Corporation was incorporated in the Cayman Islands in September 2019 as the group's holding company. === Retail trading boom === In May 2020, the company received SEC approval to launch a robo-advisor on its platform. By August 2020, the platform had over 11 million registered users, and in October 2020, it had 750,000 daily active users. Webull introduced options trading in 2020 and later added cryptocurrency trading through a separate digital-asset business. In November 2020, Webull began supporting cryptocurrency transactions. In December 2020, Webull launched trading services in Hong Kong. During the GameStop short squeeze in January 2021, Webull gained attention as some retail traders looked for alternatives to Robinhood. On January 27, 2021, Webull recorded its highest-ever number of active daily users, at 952,000, and the Webull app was downloaded across the Apple App and Google Play stores an estimated 100,000 times. That week, approximately 1.2 million people downloaded the Webull mobile app, which the company reported as a 1,548% week-over-week increase. On January 28, 2021, Webull was directed by its clearing house to temporarily halt buy orders for stocks affected by the GameStop short squeeze. In June 2021, Webull was reported to be considering a U.S. initial public offering that could raise up to $400 million. === Restructuring and expansion === Webull restructured its China-related corporate arrangements in 2022 and later stated that Hunan Fumi was no longer affiliated with the group. In 2022 and 2023, Webull expanded in several non-U.S. markets, including Singapore, Australia, South Africa, Japan, the United Kingdom and Indonesia. In June 2023, Webull moved cryptocurrency trading to a separate app called Webull Pay. By the end of 2023, Webull had 4.3 million funded accounts and US$8.2 billion in customer assets. In January 2024, Anthony Denier was promoted to group president of Webull Corporation. In November 2024, Webull launched overnight, or extended-hours, trading, expanding the trading window of U.S. stocks for users inside and outside the United States. === SPAC merger and Nasdaq listing === On February 28, 2024, Webull agreed to go public through a business combination with SK Growth Opportunities Corporation (NASDAQ: SKGR), a special-purpose acquisition company, in a deal that valued the company at approximately US$7.3 billion. The proposed valuation drew scrutiny because of Webull's limited financial disclosure at announcement, reliance on payment for order flow and small expected public float. SK Growth shareholders approved the business combination on March 30, 2025, and the transaction closed on April 10, 2025. Webull's Class A ordinary shares and warrants began trading on the Nasdaq on April 11, 2025 under the ticker symbols BULL and BULLW (incentive warrants traded under BULLZ until their redemption in June 2025). The merger brought Webull to the public market but generated little cash for the company: after shareholder redemptions, Webull disclosed net proceeds of US$430,066 from the transaction. After the listing, Webull's shares experienced extreme volatility, rising as much as 500% to US$79.56 on April 14, 2025, after closing at US$13.25 on the prior trading day. The initial post-listing surge increased the value of Webull holdings owned by earlier investors, including RIT Capital Partners, which had first invested in Webull in 2021. In April 2026, after Webull's shares had fallen about 70% over the previous year, the company authorized a US$100 million share repurchase program. == Business model and financials == Webull provides a self-directed electronic trading platform available through mobile, desktop and web applications. Depending on jurisdiction, the platform offers trading in stocks, exchange-traded funds, options, margin, futures, fixed income products, cryptocurrency, cash management features and market data tools. In the United States, Webull Financial LLC is a registered broker-dealer and member of FINRA and the Securities Investor Protection Corporation, while Webull operates in other markets through locally licensed brokerage subsidiaries. Webull operates a commission-free or low-cost brokerage model for self-directed retail investors. In the United States, a substantial part of its trading-related revenue comes from payment for order flow, while in some non-U.S. markets the company more commonly charges commissions directly to customers. The platform is aimed at more active retail investors, including users seeking options tools, extended-hours trading and real-time market data. For 2025, Webull reported total revenue of US$571.0 million, up from US$390.2 million in 2024. Equity and option order-flow rebates accounted for US$304.1 million, or 53.3% of revenue, making order-flow rebates the company's largest reported revenue category. Interest-related income accounted for US$154.3 million, handling charge income for US$87.3 million and other revenue for US$25.3 million. Options were the larger component of the company's order-flow rebates in 2025, generating US$210.0 million compared with US$94.2 million from equities. Webull also generates revenue from interest-related activities, including margin financing, customer bank deposits, stock lending and corporate bank deposits. The company has stated that its interest-related income is affected by interest rates, customer cash balances, margin balances and demand for stock lending. The company had approximately 20 million registered users worldwide as of February 2024. As of December 31, 2025, it reported 26.8 million registered users, 5.0 million funded accounts and US$24.6 billion in customer assets. As of March 2025, Webull operated in Hong Kong, Singapore, Australia, South Africa, Japan, the United Kingdom, the United States, Indonesia, Canada, Brazil, Thailand, Malaysia and Mexico. == Marketing and sponsorships == Webull has used paid digital advertising, referral incentives, free-stock promotions, affiliate marketing and sports sponsorships to acquire customers and promote its brand. In its 2025 annual filing, the company reported marketing and branding expenses of US$152.3 million in 2023, US$138.7 million in 2024 and US$135.9 million in 2025. Webull said most of its advertising and promotion costs were related to paid search and paid social advertising, and that it had reduced free-stock promotions while shifting toward deposit- and asset-transfer-based incentives. In September 2021, BSE Global, the parent company of the Brooklyn Nets and New York Liberty, entered into a global multi-year agreement with Webull. Under the agreement, Webull became an official sponsor and online brokerage partner of the teams, with branding that included a jersey patch on Brooklyn Nets uniforms. Spo

    Read more →
  • Hi uTandem

    Hi uTandem

    Hi uTandem, also known as uTandem, is a free language exchange mobile app. It helps people to connect with other language learners in order to carry out face-to-face language exchange sessions and also offers learners lists of businesses in the field of language learning or language exchange. == Use == Hi uTandem is built around the concept of language exchange, which is a method of language learning based on mutual oral linguistic exchange between partners. Ideally, each partner is a native speaker of the language they are helping their counterpart to learn. The app designed for users to chat with other users and translate messages, find suitable language partners and to locate language schools, bars, cafés and language exchange groups around them. == Team and development == Hi uTandem was released in January, 2016. The initial idea was conceived by Alberto Rodríguez as part of a team of eight Spanish youngsters. Hi uTandem belongs to the company Velvor Tech S.L., founded by the same members and registered in Ronda (Spain). == Reception == Hi uTandem was listed on the Top 4 Apps to Learn Languages list by ElPlural.com and since its launch it has been featured in numerous online and physical sources, including 20 minutos, Europapress, ABC Andalucía and Telefónica's Think Big Blog.

    Read more →
  • Automatic meter reading

    Automatic meter reading

    Automatic meter reading (AMR) is the technology of automatically collecting consumption, diagnostic, and status data from water meter or energy metering devices (gas, electric) and transferring that data to a central database for billing, troubleshooting, and analyzing. This technology mainly saves utility providers the expense of periodic trips to each physical location to read a meter. Another advantage is that billing can be based on near real-time consumption rather than on estimates based on past or predicted consumption. This timely information coupled with analysis can help both utility providers and customers better control the use and production of electric energy, gas usage, or water consumption. AMR technologies include handheld, mobile and network technologies based on telephony platforms (wired and wireless), radio frequency (RF), or powerline transmission. == Technologies == === Touch technology === With touch-based AMR, a meter reader carries a handheld computer or data collection device with a wand or probe. The device automatically collects the readings from a meter by touching or placing the read probe close to a reading coil enclosed in the touchpad. When a button is pressed, the probe sends an interrogate signal to the touch module to collect the meter reading. The software in the device matches the serial number to one in the route database, and saves the meter reading for later download to a billing or data collection computer. Since the meter reader still has to go to the site of the meter, this is sometimes referred to as "on-site" AMR. Another form of contact reader uses a standardized infrared port to transmit data. Protocols are standardized between manufacturers by such documents as ANSI C12.18 or IEC 61107. === AMR hosting === AMR hosting is a back-office solution which allows a user to track their electricity, water, or gas consumption over the Internet. All data is collected in near real-time, and is stored in a database by data acquisition software. The user can view the data via a web application, and can analyze the data using various online analysis tools such as charting load profiles, analyzing tariff components, and verify their utility bill. === Radio frequency network === Radio frequency based AMR can take many forms. The more common ones are handheld, mobile, satellite and fixed network solutions. There are both two-way RF systems and one-way RF systems in use that use both licensed and unlicensed RF bands. In a two-way or "wake up" system, a radio signal is normally sent to an AMR meter's unique serial number, instructing its transceiver to power-up and transmit its data. The meter transceiver and the reading transceiver both send and receive radio signals. In a one-way "bubble-up" or continuous broadcast type system, the meter transmits continuously and data is sent every few seconds. This means the reading device can be a receiver only, and the meter a transmitter only. Data travels only from the meter transmitter to the reading receiver. There are also hybrid systems that combine one-way and two-way techniques, using one-way communication for reading and two-way communication for programming functions. RF-based meter reading usually eliminates the need for the meter reader to enter the property or home, or to locate and open an underground meter pit. The utility saves money by increased speed of reading, has less liability from entering private property, and has fewer missed readings from being unable to access the meter. The technology based on RF is not readily accepted everywhere. In several Asian countries, the technology faces a barrier of regulations in place pertaining to use of the radio frequency of any radiated power. For example, in India the radio frequency which is generally in ISM band is not free to use even for low power radio of 10 mW. The majority of manufacturers of electricity meters have radio frequency devices in the frequency band of 433/868 MHz for large scale deployment in European countries. The frequency band of 2.4 GHz can be now used in India for outdoor as well as indoor applications, but few manufacturers have shown products within this frequency band. Initiatives in radio frequency AMR in such countries are being taken up with regulators wherever the cost of licensing outweighs the benefits of AMR. ==== Handheld ==== In handheld AMR, a meter reader carries a handheld computer with a built-in or attached receiver/transceiver (radio frequency or touch) to collect meter readings from an AMR capable meter. This is sometimes referred to as "walk-by" meter reading since the meter reader walks by the locations where meters are installed as they go through their meter reading route. Handheld computers may also be used to manually enter readings without the use of AMR technology as an alternate but this will not support exhaustive data which can be accurately read using the meter reading electronically. ==== Mobile ==== Mobile or "drive-by" meter reading is where a reading device is installed in a vehicle. The meter reader drives the vehicle while the reading device automatically collects the meter readings. Often, for mobile meter reading, the reading equipment includes navigational and mapping features provided by GPS and mapping software. With mobile meter reading, the reader does not normally have to read the meters in any particular route order, but just drives the service area until all meters are read. Components often consist of a laptop or proprietary computer, software, RF receiver/transceiver, and external vehicle antennas. ==== Satellite ==== Transmitters for data collection satellites can be installed in the field next to existing meters. The satellite AMR devices communicate with the meter for readings, and then sends those readings over a fixed or mobile satellite network. This network requires a clear view to the sky for the satellite transmitter/receiver, but eliminates the need to install fixed towers or send out field technicians, thereby being particularly suited for areas with low geographic meter density. ==== RF technologies commonly used for AMR ==== Narrow Band (single fixed radio frequency) Spread spectrum Direct-sequence spread spectrum (DSSS) Frequency-hopping spread spectrum (FHSS) There are also meters using AMR with RF technologies such as cellular phone data systems, Zigbee, Bluetooth, Wavenis and others. Some systems operate with U.S. Federal Communications Commission (FCC) licensed frequencies and others under FCC Part 15, which allows use of unlicensed radio frequencies. ==== Wi-Fi ==== WiSmart is a versatile platform which can be used by a variety of electrical home appliances in order to provide wireless TCP/IP communication using the 802.11 b/g protocol. Devices such as the Smart Thermostat permit a utility to lower a home's power consumption to help manage power demand. The city of Corpus Christi became one of the first cities in the United States to implement citywide Wi-Fi, which had been free until May 31, 2007, mainly to facilitate AMR after a meter reader was attacked by a dog. Today many meters are designed to transmit using Wi-Fi, even if a Wi-Fi network is not available, and they are read using a drive-by local Wi-Fi hand held receiver. The meters installed in Corpus Christi are not directly Wi-Fi enabled, but rather transmit narrow-band burst telemetry on the 460 MHz band. This narrow-band signal has much greater range than Wi-Fi, so the number of receivers required for the project are far fewer. Special receiver stations then decode the narrow-band signals and resend the data via Wi-Fi. Most of the automated utility meters installed in the Corpus Christi area are battery powered. Wi-Fi technology is unsuitable for long-term battery-powered operation. === Power line communication === PLC is a method where electronic data is transmitted over power lines back to the substation, then relayed to a central computer in the utility's main office. This would be considered a type of fixed network system—the network being the distribution network which the utility has built and maintains to deliver electric power. Such systems are primarily used for electric meter reading. Some providers have interfaced gas and water meters to feed into a PLC type system. == Brief history == In 1972, Theodore George "Ted" Paraskevakos, while working with Boeing in Huntsville, Alabama, developed a sensor monitoring system which used digital transmission for security, fire and medical alarm systems as well as meter reading capabilities for all utilities. This technology was a spin-off of the automatic telephone line identification system, now known as caller ID. In 1974, Paraskevakos was awarded a U.S. patent for this technology. In 1977, he launched Metretek, Inc., which developed and produced the first fully automated, commercially available remote meter reading and load management system. Since this system was developed pre-Internet, Metret

    Read more →
  • Viewport

    Viewport

    A viewport is a polygon viewing region in computer graphics. In computer graphics theory, there are two region-like notions of relevance when rendering some objects to an image. In textbook terminology, the world coordinate window is the area of interest (meaning what the user wants to visualize) in some application-specific coordinates, e.g. miles, centimeters etc. The word window as used here should not be confused with the GUI window, i.e. the notion used in window managers. Rather it is an analogy with how a window limits what one can see outside a room. In contrast, the viewport is an area (typically rectangular) expressed in rendering-device-specific coordinates, e.g. pixels for screen coordinates, in which the objects of interest are going to be rendered. Clipping to the world-coordinates window is usually applied to the objects before they are passed through the window-to-viewport transformation. For a 2D object, the latter transformation is simply a combination of translation and scaling, the latter not necessarily uniform. An analogy of this transformation process based on traditional photography notions is to equate the world-clipping window with the camera settings and the variously sized prints that can be obtained from the resulting film image as possible viewports. Because the physical-device-based coordinates may not be portable from one device to another, a software abstraction layer known as normalized device coordinates is typically introduced for expressing viewports; it appears for example in the Graphical Kernel System (GKS) and later systems inspired from it. In 3D computer graphics, the viewport refers to the 2D rectangle used to project the 3D scene to the position of a virtual camera. A viewport is a region of the screen used to display a portion of the total image to be shown. In virtual desktops, the viewport is the visible portion of a 2D area which is larger than the visualization device. When viewing a document in a web browser, the viewport is the region of the browser window which contains the visible portion of the document. If the size of the viewport changes, for example as a result of the user resizing the browser window, then the browser may reflow the document (recalculate the locations and sizes of elements of the document). If the document is larger than the viewport, the user can control the portion of the document which is visible by scrolling in the viewport.

    Read more →
  • Anderson's rule (computer science)

    Anderson's rule (computer science)

    In the field of computer security, Anderson's rule refers to a principle formulated by Ross J. Anderson: systems that handle sensitive personal information involve a trilemma of security, functionality, and scale, of which you can choose any two. A system that has information on many data subjects and to which many people require access is hard to secure unless its functionality is severely restricted. If it has rich functionality, you may have to restrict the number of people with access, or accept that some information will leak.

    Read more →