Automatic meter reading (AMR) is the technology of automatically collecting consumption, diagnostic, and status data from water meter or energy metering devices (gas, electric) and transferring that data to a central database for billing, troubleshooting, and analyzing. This technology mainly saves utility providers the expense of periodic trips to each physical location to read a meter. Another advantage is that billing can be based on near real-time consumption rather than on estimates based on past or predicted consumption. This timely information coupled with analysis can help both utility providers and customers better control the use and production of electric energy, gas usage, or water consumption. AMR technologies include handheld, mobile and network technologies based on telephony platforms (wired and wireless), radio frequency (RF), or powerline transmission. == Technologies == === Touch technology === With touch-based AMR, a meter reader carries a handheld computer or data collection device with a wand or probe. The device automatically collects the readings from a meter by touching or placing the read probe close to a reading coil enclosed in the touchpad. When a button is pressed, the probe sends an interrogate signal to the touch module to collect the meter reading. The software in the device matches the serial number to one in the route database, and saves the meter reading for later download to a billing or data collection computer. Since the meter reader still has to go to the site of the meter, this is sometimes referred to as "on-site" AMR. Another form of contact reader uses a standardized infrared port to transmit data. Protocols are standardized between manufacturers by such documents as ANSI C12.18 or IEC 61107. === AMR hosting === AMR hosting is a back-office solution which allows a user to track their electricity, water, or gas consumption over the Internet. All data is collected in near real-time, and is stored in a database by data acquisition software. The user can view the data via a web application, and can analyze the data using various online analysis tools such as charting load profiles, analyzing tariff components, and verify their utility bill. === Radio frequency network === Radio frequency based AMR can take many forms. The more common ones are handheld, mobile, satellite and fixed network solutions. There are both two-way RF systems and one-way RF systems in use that use both licensed and unlicensed RF bands. In a two-way or "wake up" system, a radio signal is normally sent to an AMR meter's unique serial number, instructing its transceiver to power-up and transmit its data. The meter transceiver and the reading transceiver both send and receive radio signals. In a one-way "bubble-up" or continuous broadcast type system, the meter transmits continuously and data is sent every few seconds. This means the reading device can be a receiver only, and the meter a transmitter only. Data travels only from the meter transmitter to the reading receiver. There are also hybrid systems that combine one-way and two-way techniques, using one-way communication for reading and two-way communication for programming functions. RF-based meter reading usually eliminates the need for the meter reader to enter the property or home, or to locate and open an underground meter pit. The utility saves money by increased speed of reading, has less liability from entering private property, and has fewer missed readings from being unable to access the meter. The technology based on RF is not readily accepted everywhere. In several Asian countries, the technology faces a barrier of regulations in place pertaining to use of the radio frequency of any radiated power. For example, in India the radio frequency which is generally in ISM band is not free to use even for low power radio of 10 mW. The majority of manufacturers of electricity meters have radio frequency devices in the frequency band of 433/868 MHz for large scale deployment in European countries. The frequency band of 2.4 GHz can be now used in India for outdoor as well as indoor applications, but few manufacturers have shown products within this frequency band. Initiatives in radio frequency AMR in such countries are being taken up with regulators wherever the cost of licensing outweighs the benefits of AMR. ==== Handheld ==== In handheld AMR, a meter reader carries a handheld computer with a built-in or attached receiver/transceiver (radio frequency or touch) to collect meter readings from an AMR capable meter. This is sometimes referred to as "walk-by" meter reading since the meter reader walks by the locations where meters are installed as they go through their meter reading route. Handheld computers may also be used to manually enter readings without the use of AMR technology as an alternate but this will not support exhaustive data which can be accurately read using the meter reading electronically. ==== Mobile ==== Mobile or "drive-by" meter reading is where a reading device is installed in a vehicle. The meter reader drives the vehicle while the reading device automatically collects the meter readings. Often, for mobile meter reading, the reading equipment includes navigational and mapping features provided by GPS and mapping software. With mobile meter reading, the reader does not normally have to read the meters in any particular route order, but just drives the service area until all meters are read. Components often consist of a laptop or proprietary computer, software, RF receiver/transceiver, and external vehicle antennas. ==== Satellite ==== Transmitters for data collection satellites can be installed in the field next to existing meters. The satellite AMR devices communicate with the meter for readings, and then sends those readings over a fixed or mobile satellite network. This network requires a clear view to the sky for the satellite transmitter/receiver, but eliminates the need to install fixed towers or send out field technicians, thereby being particularly suited for areas with low geographic meter density. ==== RF technologies commonly used for AMR ==== Narrow Band (single fixed radio frequency) Spread spectrum Direct-sequence spread spectrum (DSSS) Frequency-hopping spread spectrum (FHSS) There are also meters using AMR with RF technologies such as cellular phone data systems, Zigbee, Bluetooth, Wavenis and others. Some systems operate with U.S. Federal Communications Commission (FCC) licensed frequencies and others under FCC Part 15, which allows use of unlicensed radio frequencies. ==== Wi-Fi ==== WiSmart is a versatile platform which can be used by a variety of electrical home appliances in order to provide wireless TCP/IP communication using the 802.11 b/g protocol. Devices such as the Smart Thermostat permit a utility to lower a home's power consumption to help manage power demand. The city of Corpus Christi became one of the first cities in the United States to implement citywide Wi-Fi, which had been free until May 31, 2007, mainly to facilitate AMR after a meter reader was attacked by a dog. Today many meters are designed to transmit using Wi-Fi, even if a Wi-Fi network is not available, and they are read using a drive-by local Wi-Fi hand held receiver. The meters installed in Corpus Christi are not directly Wi-Fi enabled, but rather transmit narrow-band burst telemetry on the 460 MHz band. This narrow-band signal has much greater range than Wi-Fi, so the number of receivers required for the project are far fewer. Special receiver stations then decode the narrow-band signals and resend the data via Wi-Fi. Most of the automated utility meters installed in the Corpus Christi area are battery powered. Wi-Fi technology is unsuitable for long-term battery-powered operation. === Power line communication === PLC is a method where electronic data is transmitted over power lines back to the substation, then relayed to a central computer in the utility's main office. This would be considered a type of fixed network system—the network being the distribution network which the utility has built and maintains to deliver electric power. Such systems are primarily used for electric meter reading. Some providers have interfaced gas and water meters to feed into a PLC type system. == Brief history == In 1972, Theodore George "Ted" Paraskevakos, while working with Boeing in Huntsville, Alabama, developed a sensor monitoring system which used digital transmission for security, fire and medical alarm systems as well as meter reading capabilities for all utilities. This technology was a spin-off of the automatic telephone line identification system, now known as caller ID. In 1974, Paraskevakos was awarded a U.S. patent for this technology. In 1977, he launched Metretek, Inc., which developed and produced the first fully automated, commercially available remote meter reading and load management system. Since this system was developed pre-Internet, Metret
Coghead
Coghead was a web application company based out of Redwood City, California. The company offered a web-based service for building and hosting custom online database applications. Applications were built around custom data collections and were typically designed to facilitate management of, and collaboration on, business data. Examples of Coghead's "gallery" applications include project management, simple Customer relationship management, bug tracking and extreme programming. Coghead's service was available through a limited-access beta program before "going live" for free trial accounts in April, 2007. Coghead launched a paid subscription plans in June, 2007. On February 19, 2009, Coghead announced that its intellectual property assets (its 'service') had been acquired by SAP AG (NYSE:SAP). == Product == Coghead's product was a fully hosted environment for building, accessing, and maintaining applications and the associated business data. Like other so-called "Web 2.0" companies, Coghead built its product around the idea of "software as a service". The product was intended to allow users to design a range of applications from scratch using only a drag and drop, WYSIWYG user interface, with very limited scripting or coding (if any) required. Coghead also offered its paid subscribers the ability to develop and publish "Coglets," web forms that allowed site visitors to view data in, or submit data into, the host's Coghead database. On February 19, 2009, Coghead announced that SAP AG had acquired the Coghead service through an asset purchase. The SAP asset purchase closed in the 1st Quarter 2009. Immediately upon closing the asset purchase, the public-facing service was taken off-line by SAP as they prepared to integrate the Coghead code with other SAP assets. This forced many of Coghead's customers to find alternative solutions.
Drush
Drush (DRUpal SHell) is a computer software shell-based application used to control, manipulate, and administer Drupal websites. == Details == Drush was originally developed by Arto Bendiken for Drupal 4.7. In May 2007, it was partly rewritten and redesigned for Drupal 5 by Franz Heinzmann. Drush is maintained by Moshe Weitzman with the support of Owen Barton, greg.1.anderson, jonhattan, Mark Sonnabaum, Jonathan Hedstrom and Christopher Gervais.
Springpad
Springpad was a free online application and web service that allowed its registered users to save, organize and share collected ideas and information. As users added content to their Springpad accounts, the application automatically identified and categorized it, then generated additional snippets based on the types of objects added—for example, listing price comparisons for products and showtimes for movies. Springpad was also available as apps on the iPad, iPhone and Android that synchronized with the Web interface. Springpad was bundled on new Toshiba notebook computers through a Web application subscription service. On May 23, 2014, Springpad announced that it would cease operations on June 25, 2014. The company then allowed users to export their data (as JSON and read-only HTML formats), or to automatically migrate it to Evernote accounts before the expiration date. == Features == Springpad users could use the main site interface which uses HTML5 from most browsers or use the smartphone app to capture notes, tasks, or lists which were then added to the user's "My Stuff", the user's personal database or collection. Additionally Springpad let users look up items of interest which were then automatically categorized based on type or manually categorized by the user. Category types included recipes, movies, products, restaurants and wine. Events could also be added to Springpad, and if the user used Google Calendar, they could opt to sync the event to it. In addition to the smartphone app and site, Springpad could be used via browser extension for Google Chrome, or the Springpad Clipper, a bookmarklet to analyze webpages and clip relevant information from them—for example, the ingredients needed for a recipe—or to add the site as a normal bookmark. Another way users could add content to their Springpad "My Stuff" was by emailing entries to an email address specified on Springpad registration. Springpad's smartphone apps could be used to scan barcodes to identify products, save them to the user's "My Stuff", and automatically generate additional product information and links. The mobile app could also save images taken with the phone's camera, and locate nearby businesses. With most of the content added to a user's "My Stuff", relevant news, useful links and other helpful information could be viewed. Users could also attach additional notes and images to content they had already saved, and could add reminders and alerts which could be emailed to the user or texted to their phone. Springpad also added alerts to its own Alerts section for relevant news, deals or coupons for specific products users added. For additional organization, anything added to Springpad could also be tagged. Users could also add entries to "Notebooks" to separate content by projects, or any other way they wished. Each Notebook included a section called a "Board", which acted as a pin board where users could "pin" content they'd added to the Notebook, allowing them to visually lay out items. If the user added a map to the Board and had entries that included an address, Springpad could automatically point out entries on the map. By default, everything added to Springpad was private. However users could change the privacy settings for each of the types of items added, decide to make specific items public and shareable on Facebook and Twitter, add them to their public page, or keep them private but links to them with specific people.
Endomondo
Endomondo is a health and wellness website. It allows users to track their health statistics and provides insights on fitness trends. Originally launched in 2007, Endomondo was acquired by Under Armour in 2015. Under Armour shut down Endomondo in 2020, but, by 2024, Endomondo re-launched as its own entity. == History == Endomondo started in Denmark in 2007 by Mette Lykke, Christian Birk and Jakob Nordenhof Jønck. In 2011, the company opened an office in Silicon Valley, USA, but kept its research and development department in Denmark. In 2013, Endomondo LLC was listed in Red Herring as a European finalists for promising start-ups. The same year, Christian Birk and Jakob Nordenhof Jønck left the daily operation of the company, but kept co-ownership. In February 2015, Endomondo LLC was acquired by athletic apparel maker Under Armour for $85 million. Endomondo, at that time, had over 20 million users. In October 2020, Under Armour announced that Endomondo would be shutting down and selling off MyFitnessPal to the private equity firm Francisco Partners for $345 million. Service stopped on 31 December 2020, giving customers until 15 February 2021 to download an archive of their historic data. In 2024, Endomondo.com was brought back online as a professional fitness guidance website. == Features == Endomondo provides numerous workouts, guidance on exercises, performance-enhancing nutrition, and tips. Previously, Endomondo was able to track numerous fitness attributes such as running routes, distance, duration, and calories. The software helped analyze performance and recommend improvements. There was a free and a paid version available of Endomondo. The free version had advertisements. The paid Premium version was free of advertisements and included additional features such as the possibility to create one's own training plan. The offering of additional features was different between the Android, IOS and Windows platforms, and had significantly better features for tracking performance over time than UnderArmours suggested replacement. Endomondo offered challenges of various types to the user and allowed users to create their own challenges.
Superquadrics
In mathematics, the superquadrics or super-quadrics (also superquadratics) are a family of geometric shapes defined by formulas that resemble those of ellipsoids and other quadrics, except that the squaring operations are replaced by arbitrary powers. They can be seen as the three-dimensional relatives of the superellipses. The term may refer to the solid object or to its surface, depending on the context. The equations below specify the surface; the solid is specified by replacing the equality signs by less-than-or-equal signs. The superquadrics include many shapes that resemble cubes, octahedra, cylinders, lozenges and spindles, with rounded or sharp corners. Because of their flexibility and relative simplicity, they are popular geometric modeling tools, especially in computer graphics. It becomes an important geometric primitive widely used in computer vision, robotics, and physical simulation. Some authors, such as Alan Barr, define "superquadrics" as including both the superellipsoids and the supertoroids. In modern computer vision literatures, superquadrics and superellipsoids are used interchangeably, since superellipsoids are the most representative and widely utilized shape among all the superquadrics. Comprehensive coverage of geometrical properties of superquadrics and methods of their recovery from range images and point clouds are covered in several computer vision literatures. == Formulas == === Implicit equation === The surface of the basic superquadric is given by | x | r + | y | s + | z | t = 1 {\displaystyle \left|x\right|^{r}+\left|y\right|^{s}+\left|z\right|^{t}=1} where r, s, and t are positive real numbers that determine the main features of the superquadric. Namely: less than 1: a pointy octahedron modified to have concave faces and sharp edges. exactly 1: a regular octahedron. between 1 and 2: an octahedron modified to have convex faces, blunt edges and blunt corners. exactly 2: a sphere greater than 2: a cube modified to have rounded edges and corners. infinite (in the limit): a cube Each exponent can be varied independently to obtain combined shapes. For example, if r=s=2, and t=4, one obtains a solid of revolution which resembles an ellipsoid with round cross-section but flattened ends. This formula is a special case of the superellipsoid's formula if (and only if) r = s. If any exponent is allowed to be negative, the shape extends to infinity. Such shapes are sometimes called super-hyperboloids. The basic shape above spans from -1 to +1 along each coordinate axis. The general superquadric is the result of scaling this basic shape by different amounts A, B, C along each axis. Its general equation is | x A | r + | y B | s + | z C | t = 1. {\displaystyle \left|{\frac {x}{A}}\right|^{r}+\left|{\frac {y}{B}}\right|^{s}+\left|{\frac {z}{C}}\right|^{t}=1.} === Parametric description === Parametric equations in terms of surface parameters u and v (equivalent to longitude and latitude if m equals 2) are x ( u , v ) = A g ( v , 2 r ) g ( u , 2 r ) y ( u , v ) = B g ( v , 2 s ) f ( u , 2 s ) z ( u , v ) = C f ( v , 2 t ) − π 2 ≤ v ≤ π 2 , − π ≤ u < π , {\displaystyle {\begin{aligned}x(u,v)&{}=Ag\left(v,{\frac {2}{r}}\right)g\left(u,{\frac {2}{r}}\right)\\y(u,v)&{}=Bg\left(v,{\frac {2}{s}}\right)f\left(u,{\frac {2}{s}}\right)\\z(u,v)&{}=Cf\left(v,{\frac {2}{t}}\right)\\&-{\frac {\pi }{2}}\leq v\leq {\frac {\pi }{2}},\quad -\pi \leq u<\pi ,\end{aligned}}} where the auxiliary functions are f ( ω , m ) = sgn ( sin ω ) | sin ω | m g ( ω , m ) = sgn ( cos ω ) | cos ω | m {\displaystyle {\begin{aligned}f(\omega ,m)&{}=\operatorname {sgn}(\sin \omega )\left|\sin \omega \right|^{m}\\g(\omega ,m)&{}=\operatorname {sgn}(\cos \omega )\left|\cos \omega \right|^{m}\end{aligned}}} and the sign function sgn(x) is sgn ( x ) = { − 1 , x < 0 0 , x = 0 + 1 , x > 0. {\displaystyle \operatorname {sgn}(x)={\begin{cases}-1,&x<0\\0,&x=0\\+1,&x>0.\end{cases}}} === Spherical product === Barr introduces the spherical product which given two plane curves produces a 3D surface. If f ( μ ) = ( f 1 ( μ ) f 2 ( μ ) ) , g ( ν ) = ( g 1 ( ν ) g 2 ( ν ) ) {\displaystyle f(\mu )={\begin{pmatrix}f_{1}(\mu )\\f_{2}(\mu )\end{pmatrix}},\quad g(\nu )={\begin{pmatrix}g_{1}(\nu )\\g_{2}(\nu )\end{pmatrix}}} are two plane curves then the spherical product is h ( μ , ν ) = f ( μ ) ⊗ g ( ν ) = ( f 1 ( μ ) g 1 ( ν ) f 1 ( μ ) g 2 ( ν ) f 2 ( μ ) ) {\displaystyle h(\mu ,\nu )=f(\mu )\otimes g(\nu )={\begin{pmatrix}f_{1}(\mu )\ g_{1}(\nu )\\f_{1}(\mu )\ g_{2}(\nu )\\f_{2}(\mu )\end{pmatrix}}} This is similar to the typical parametric equation of a sphere: x = x 0 + r sin θ cos φ y = y 0 + r sin θ sin φ ( 0 ≤ θ ≤ π , 0 ≤ φ < 2 π ) z = z 0 + r cos θ {\displaystyle {\begin{aligned}x&=x_{0}+r\sin \theta \;\cos \varphi \\y&=y_{0}+r\sin \theta \;\sin \varphi \qquad (0\leq \theta \leq \pi ,\;0\leq \varphi <2\pi )\\z&=z_{0}+r\cos \theta \end{aligned}}} which give rise to the name spherical product. Barr uses the spherical product to define quadric surfaces, like ellipsoids, and hyperboloids as well as the torus, superellipsoid, superquadric hyperboloids of one and two sheets, and supertoroids. == Plotting code == The following GNU Octave code generates a mesh approximation of a superquadric:
Availability zone
In cloud computing, an availability region is a group of data centres that are located in the same geographical region. Availability regions comprise multiple availability zones, which are groups of data centres that are located far enough from each other to prevent large-scale outages in the event of failure of a single zone, whilst still being close enough to each other to enable low-latency connections. Distributed systems spanning multiple availability zones allow for high availability, even in the event of catastrophic failure, such as natural disasters. Services offering distinct availability zones include Amazon Web Services, Microsoft Azure and Google Cloud.