AI Art Filter

AI Art Filter — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Inductive probability

    Inductive probability

    Inductive probability attempts to give the probability of future events based on past events. It is the basis for inductive reasoning, and gives the mathematical basis for learning and the perception of patterns. It is a source of knowledge about the world. There are three sources of knowledge: inference, communication, and deduction. Communication relays information found using other methods. Deduction establishes new facts based on existing facts. Inference establishes new facts from data. Its basis is Bayes' theorem. Information describing the world is written in a language. For example, a simple mathematical language of propositions may be chosen. Sentences may be written down in this language as strings of characters. But in the computer it is possible to encode these sentences as strings of bits (1s and 0s). Then the language may be encoded so that the most commonly used sentences are the shortest. This internal language implicitly represents probabilities of statements. Occam's razor says the "simplest theory, consistent with the data is most likely to be correct". The "simplest theory" is interpreted as the representation of the theory written in this internal language. The theory with the shortest encoding in this internal language is most likely to be correct. == History == Probability and statistics was focused on probability distributions and tests of significance. Probability was formal, well defined, but limited in scope. In particular its application was limited to situations that could be defined as an experiment or trial, with a well defined population. Bayes's theorem is named after Rev. Thomas Bayes 1701–1761. Bayesian inference broadened the application of probability to many situations where a population was not well defined. But Bayes' theorem always depended on prior probabilities, to generate new probabilities. It was unclear where these prior probabilities should come from. Ray Solomonoff developed algorithmic probability which gave an explanation for what randomness is and how patterns in the data may be represented by computer programs, that give shorter representations of the data circa 1964. Chris Wallace and D. M. Boulton developed minimum message length circa 1968. Later Jorma Rissanen developed the minimum description length circa 1978. These methods allow information theory to be related to probability, in a way that can be compared to the application of Bayes' theorem, but which give a source and explanation for the role of prior probabilities. Marcus Hutter combined decision theory with the work of Ray Solomonoff and Andrey Kolmogorov to give a theory for the Pareto optimal behavior for an Intelligent agent, circa 1998. === Minimum description/message length === The program with the shortest length that matches the data is the most likely to predict future data. This is the thesis behind the minimum message length and minimum description length methods. At first sight Bayes' theorem appears different from the minimimum message/description length principle. At closer inspection it turns out to be the same. Bayes' theorem is about conditional probabilities, and states the probability that event B happens if firstly event A happens: P ( A ∧ B ) = P ( B ) ⋅ P ( A | B ) = P ( A ) ⋅ P ( B | A ) {\displaystyle P(A\land B)=P(B)\cdot P(A|B)=P(A)\cdot P(B|A)} becomes in terms of message length L, L ( A ∧ B ) = L ( B ) + L ( A | B ) = L ( A ) + L ( B | A ) . {\displaystyle L(A\land B)=L(B)+L(A|B)=L(A)+L(B|A).} This means that if all the information is given describing an event then the length of the information may be used to give the raw probability of the event. So if the information describing the occurrence of A is given, along with the information describing B given A, then all the information describing A and B has been given. ==== Overfitting ==== Overfitting occurs when the model matches the random noise and not the pattern in the data. For example, take the situation where a curve is fitted to a set of points. If a polynomial with many terms is fitted then it can more closely represent the data. Then the fit will be better, and the information needed to describe the deviations from the fitted curve will be smaller. Smaller information length means higher probability. However, the information needed to describe the curve must also be considered. The total information for a curve with many terms may be greater than for a curve with fewer terms, that has not as good a fit, but needs less information to describe the polynomial. === Inference based on program complexity === Solomonoff's theory of inductive inference is also inductive inference. A bit string x is observed. Then consider all programs that generate strings starting with x. Cast in the form of inductive inference, the programs are theories that imply the observation of the bit string x. The method used here to give probabilities for inductive inference is based on Solomonoff's theory of inductive inference. ==== Detecting patterns in the data ==== If all the bits are 1, then people infer that there is a bias in the coin and that it is more likely also that the next bit is 1 also. This is described as learning from, or detecting a pattern in the data. Such a pattern may be represented by a computer program. A short computer program may be written that produces a series of bits which are all 1. If the length of the program K is L ( K ) {\displaystyle L(K)} bits then its prior probability is, P ( K ) = 2 − L ( K ) {\displaystyle P(K)=2^{-L(K)}} The length of the shortest program that represents the string of bits is called the Kolmogorov complexity. Kolmogorov complexity is not computable. This is related to the halting problem. When searching for the shortest program some programs may go into an infinite loop. ==== Considering all theories ==== The Greek philosopher Epicurus is quoted as saying "If more than one theory is consistent with the observations, keep all theories". As in a crime novel all theories must be considered in determining the likely murderer, so with inductive probability all programs must be considered in determining the likely future bits arising from the stream of bits. Programs that are already longer than n have no predictive power. The raw (or prior) probability that the pattern of bits is random (has no pattern) is 2 − n {\displaystyle 2^{-n}} . Each program that produces the sequence of bits, but is shorter than the n is a theory/pattern about the bits with a probability of 2 − k {\displaystyle 2^{-k}} where k is the length of the program. The probability of receiving a sequence of bits y after receiving a series of bits x is then the conditional probability of receiving y given x, which is the probability of x with y appended, divided by the probability of x. ==== Universal priors ==== The programming language affects the predictions of the next bit in the string. The language acts as a prior probability. This is particularly a problem where the programming language codes for numbers and other data types. Intuitively we think that 0 and 1 are simple numbers, and that prime numbers are somehow more complex than numbers that may be composite. Using the Kolmogorov complexity gives an unbiased estimate (a universal prior) of the prior probability of a number. As a thought experiment an intelligent agent may be fitted with a data input device giving a series of numbers, after applying some transformation function to the raw numbers. Another agent might have the same input device with a different transformation function. The agents do not see or know about these transformation functions. Then there appears no rational basis for preferring one function over another. A universal prior insures that although two agents may have different initial probability distributions for the data input, the difference will be bounded by a constant. So universal priors do not eliminate an initial bias, but they reduce and limit it. Whenever we describe an event in a language, either using a natural language or other, the language has encoded in it our prior expectations. So some reliance on prior probabilities are inevitable. A problem arises where an intelligent agent's prior expectations interact with the environment to form a self reinforcing feed back loop. This is the problem of bias or prejudice. Universal priors reduce but do not eliminate this problem. === Universal artificial intelligence === The theory of universal artificial intelligence applies decision theory to inductive probabilities. The theory shows how the best actions to optimize a reward function may be chosen. The result is a theoretical model of intelligence. It is a fundamental theory of intelligence, which optimizes the agents behavior in, Exploring the environment; performing actions to get responses that broaden the agents knowledge. Competing or co-operating with another agent; games. Balancing short and long term rewards. In general no agent will always provi

    Read more →
  • Point-set registration

    Point-set registration

    In computer vision, pattern recognition, and robotics, point-set registration, also known as point-cloud registration or scan matching, is the process of finding a spatial transformation (e.g., scaling, rotation and translation) that aligns two point clouds. The purpose of finding such a transformation includes merging multiple data sets into a globally consistent model (or coordinate frame), and mapping a new measurement to a known data set to identify features or to estimate its pose. Raw 3D point cloud data are typically obtained from Lidars and RGB-D cameras. 3D point clouds can also be generated from computer vision algorithms such as triangulation, bundle adjustment, and more recently, monocular image depth estimation using deep learning. For 2D point set registration used in image processing and feature-based image registration, a point set may be 2D pixel coordinates obtained by feature extraction from an image, for example corner detection. Point cloud registration has extensive applications in autonomous driving, motion estimation and 3D reconstruction, object detection and pose estimation, robotic manipulation, simultaneous localization and mapping (SLAM), panorama stitching, virtual and augmented reality, and medical imaging. As a special case, registration of two point sets that only differ by a 3D rotation (i.e., there is no scaling and translation), is called the Wahba Problem and also related to the orthogonal procrustes problem. == Formulation == The problem may be summarized as follows: Let { M , S } {\displaystyle \lbrace {\mathcal {M}},{\mathcal {S}}\rbrace } be two finite size point sets in a finite-dimensional real vector space R d {\displaystyle \mathbb {R} ^{d}} , which contain M {\displaystyle M} and N {\displaystyle N} points respectively (e.g., d = 3 {\displaystyle d=3} recovers the typical case of when M {\displaystyle {\mathcal {M}}} and S {\displaystyle {\mathcal {S}}} are 3D point sets). The problem is to find a transformation to be applied to the moving "model" point set M {\displaystyle {\mathcal {M}}} such that the difference (typically defined in the sense of point-wise Euclidean distance) between M {\displaystyle {\mathcal {M}}} and the static "scene" set S {\displaystyle {\mathcal {S}}} is minimized. In other words, a mapping from R d {\displaystyle \mathbb {R} ^{d}} to R d {\displaystyle \mathbb {R} ^{d}} is desired which yields the best alignment between the transformed "model" set and the "scene" set. The mapping may consist of a rigid or non-rigid transformation. The transformation model may be written as T {\displaystyle T} , using which the transformed, registered model point set is: The output of a point set registration algorithm is therefore the optimal transformation T ⋆ {\displaystyle T^{\star }} such that M {\displaystyle {\mathcal {M}}} is best aligned to S {\displaystyle {\mathcal {S}}} , according to some defined notion of distance function dist ⁡ ( ⋅ , ⋅ ) {\displaystyle \operatorname {dist} (\cdot ,\cdot )} : where T {\displaystyle {\mathcal {T}}} is used to denote the set of all possible transformations that the optimization tries to search for. The most popular choice of the distance function is to take the square of the Euclidean distance for every pair of points: where ‖ ⋅ ‖ 2 {\displaystyle \|\cdot \|_{2}} denotes the vector 2-norm, s m {\displaystyle s_{m}} is the corresponding point in set S {\displaystyle {\mathcal {S}}} that attains the shortest distance to a given point m {\displaystyle m} in set M {\displaystyle {\mathcal {M}}} after transformation. Minimizing such a function in rigid registration is equivalent to solving a least squares problem. == Types of algorithms == When the correspondences (i.e., s m ↔ m {\displaystyle s_{m}\leftrightarrow m} ) are given before the optimization, for example, using feature matching techniques, then the optimization only needs to estimate the transformation. This type of registration is called correspondence-based registration. On the other hand, if the correspondences are unknown, then the optimization is required to jointly find out the correspondences and transformation together. This type of registration is called simultaneous pose and correspondence registration. === Rigid registration === Given two point sets, rigid registration yields a rigid transformation which maps one point set to the other. A rigid transformation is defined as a transformation that does not change the distance between any two points. Typically such a transformation consists of translation and rotation. In rare cases, the point set may also be mirrored. In robotics and computer vision, rigid registration has the most applications. === Non-rigid registration === Given two point sets, non-rigid registration yields a non-rigid transformation which maps one point set to the other. Non-rigid transformations include affine transformations such as scaling and shear mapping. However, in the context of point set registration, non-rigid registration typically involves nonlinear transformation. If the eigenmodes of variation of the point set are known, the nonlinear transformation may be parametrized by the eigenvalues. A nonlinear transformation may also be parametrized as a thin plate spline. === Other types === Some approaches to point set registration use algorithms that solve the more general graph matching problem. However, the computational complexity of such methods tend to be high and they are limited to rigid registrations. In this article, we will only consider algorithms for rigid registration, where the transformation is assumed to contain 3D rotations and translations (possibly also including a uniform scaling). The PCL (Point Cloud Library) is an open-source framework for n-dimensional point cloud and 3D geometry processing. It includes several point registration algorithms. == Correspondence-based registration == Correspondence-based methods assume the putative correspondences m ↔ s m {\displaystyle m\leftrightarrow s_{m}} are given for every point m ∈ M {\displaystyle m\in {\mathcal {M}}} . Therefore, we arrive at a setting where both point sets M {\displaystyle {\mathcal {M}}} and S {\displaystyle {\mathcal {S}}} have N {\displaystyle N} points and the correspondences m i ↔ s i , i = 1 , … , N {\displaystyle m_{i}\leftrightarrow s_{i},i=1,\dots ,N} are given. === Outlier-free registration === In the simplest case, one can assume that all the correspondences are correct, meaning that the points m i , s i ∈ R 3 {\displaystyle m_{i},s_{i}\in \mathbb {R} ^{3}} are generated as follows:where l > 0 {\displaystyle l>0} is a uniform scaling factor (in many cases l = 1 {\displaystyle l=1} is assumed), R ∈ SO ( 3 ) {\displaystyle R\in {\text{SO}}(3)} is a proper 3D rotation matrix ( SO ( d ) {\displaystyle {\text{SO}}(d)} is the special orthogonal group of degree d {\displaystyle d} ), t ∈ R 3 {\displaystyle t\in \mathbb {R} ^{3}} is a 3D translation vector and ϵ i ∈ R 3 {\displaystyle \epsilon _{i}\in \mathbb {R} ^{3}} models the unknown additive noise (e.g., Gaussian noise). Specifically, if the noise ϵ i {\displaystyle \epsilon _{i}} is assumed to follow a zero-mean isotropic Gaussian distribution with standard deviation σ i {\displaystyle \sigma _{i}} , i.e., ϵ i ∼ N ( 0 , σ i 2 I 3 ) {\displaystyle \epsilon _{i}\sim {\mathcal {N}}(0,\sigma _{i}^{2}I_{3})} , then the following optimization can be shown to yield the maximum likelihood estimate for the unknown scale, rotation and translation:Note that when the scaling factor is 1 and the translation vector is zero, then the optimization recovers the formulation of the Wahba problem. Despite the non-convexity of the optimization (cb.2) due to non-convexity of the set SO ( 3 ) {\displaystyle {\text{SO}}(3)} , seminal work by Berthold K.P. Horn showed that (cb.2) actually admits a closed-form solution, by decoupling the estimation of scale, rotation and translation. Similar results were discovered by Arun et al. In addition, in order to find a unique transformation ( l , R , t ) {\displaystyle (l,R,t)} , at least N = 3 {\displaystyle N=3} non-collinear points in each point set are required. More recently, Briales and Gonzalez-Jimenez have developed a semidefinite relaxation using Lagrangian duality, for the case where the model set M {\displaystyle {\mathcal {M}}} contains different 3D primitives such as points, lines and planes (which is the case when the model M {\displaystyle {\mathcal {M}}} is a 3D mesh). Interestingly, the semidefinite relaxation is empirically tight, i.e., a certifiably globally optimal solution can be extracted from the solution of the semidefinite relaxation. === Robust registration === The least squares formulation (cb.2) is known to perform arbitrarily badly in the presence of outliers. An outlier correspondence is a pair of measurements s i ↔ m i {\displaystyle s_{i}\leftrightarrow m_{i}} that departs from the generative model (cb.1). In this case, one can consider a differen

    Read more →
  • CLEVER score

    CLEVER score

    The CLEVER (Cross Lipschitz Extreme Value for nEtwork Robustness) score is a way of measuring the robustness of an artificial neural network towards adversarial attacks. It was developed by a team at the MIT-IBM Watson AI Lab in IBM Research and first presented at the 2018 International Conference on Learning Representations. It was mentioned and reviewed by Ian Goodfellow as well. It was adopted into an educational game Fool The Bank by Narendra Nath Joshi, Abhishek Bhandwaldar and Casey Dugan

    Read more →
  • Law practice management software

    Law practice management software

    Law practice management software is software designed to manage the business operations of a law firm. This can include software that manages cases, client intake, court communications, electronic discovery, time tracking, trust accounting, and billing. == Features of law practice management software == Common features of practice management software include: Case management Time tracking Document assembly Contact management Calendaring Docket management Client portal Contract Management Court Case Status Tracker Trust accounting == Examples of law practice management software == Smokeball LEAP Legal Software PracticeEvolve Dye & Durham

    Read more →
  • MY F.C.

    MY F.C.

    MY F.C. is a freemium app designed to organise and administer football teams. It is developed by MY F.C. Limited, a private company headquartered in Auckland, New Zealand. The app allows users to build a team by adding players and from there they can create trainings and matches, keep up with relevant news in the curated newsfeed, record statistics both individually and team based, follow the games live in the match-centre. The app also features integrated lineup builder with custom team kits. == History == Founders Sam Jenkins, Mike Simpson and Sam Jasper started MY F.C. in 2015 to help them "run their football lives". The app was launched on Android and iOS on 14 February 2017. == Accolades == MY F.C. won the first place prize at Bank of New Zealand Start-up Alley 2017 competition that aims to discover New Zealand start-ups who are doing innovative work and ready to establish themselves as long-term, sustainable businesses. The prize package included $15,000 and a trip to San Francisco.

    Read more →
  • Object co-segmentation

    Object co-segmentation

    In computer vision, object co-segmentation is a special case of image segmentation, which is defined as jointly segmenting semantically similar objects in multiple images or video frames. == Challenges == It is often challenging to extract segmentation masks of a target/object from a noisy collection of images or video frames, which involves object discovery coupled with segmentation. A noisy collection implies that the object/target is present sporadically in a set of images or the object/target disappears intermittently throughout the video of interest. Early methods typically involve mid-level representations such as object proposals. == Dynamic Markov networks-based methods == A joint object discover and co-segmentation method based on coupled dynamic Markov networks has been proposed recently, which claims significant improvements in robustness against irrelevant/noisy video frames. Unlike previous efforts which conveniently assumes the consistent presence of the target objects throughout the input video, this coupled dual dynamic Markov network based algorithm simultaneously carries out both the detection and segmentation tasks with two respective Markov networks jointly updated via belief propagation. Specifically, the Markov network responsible for segmentation is initialized with superpixels and provides information for its Markov counterpart responsible for the object detection task. Conversely, the Markov network responsible for detection builds the object proposal graph with inputs including the spatio-temporal segmentation tubes. == Graph cut-based methods == Graph cut optimization is a popular tool in computer vision, especially in earlier image segmentation applications. As an extension of regular graph cuts, multi-level hypergraph cut is proposed to account for more complex high order correspondences among video groups beyond typical pairwise correlations. With such hypergraph extension, multiple modalities of correspondences, including low-level appearance, saliency, coherent motion and high level features such as object regions, could be seamlessly incorporated in the hyperedge computation. In addition, as a core advantage over co-occurrence based approach, hypergraph implicitly retains more complex correspondences among its vertices, with the hyperedge weights conveniently computed by eigenvalue decomposition of Laplacian matrices. == CNN/LSTM-based methods == In action localization applications, object co-segmentation is also implemented as the segment-tube spatio-temporal detector. Inspired by the recent spatio-temporal action localization efforts with tubelets (sequences of bounding boxes), Le et al. present a new spatio-temporal action localization detector Segment-tube, which consists of sequences of per-frame segmentation masks. This Segment-tube detector can temporally pinpoint the starting/ending frame of each action category in the presence of preceding/subsequent interference actions in untrimmed videos. Simultaneously, the Segment-tube detector produces per-frame segmentation masks instead of bounding boxes, offering superior spatial accuracy to tubelets. This is achieved by alternating iterative optimization between temporal action localization and spatial action segmentation. The proposed segment-tube detector is illustrated in the flowchart on the right. The sample input is an untrimmed video containing all frames in a pair figure skating video, with only a portion of these frames belonging to a relevant category (e.g., the DeathSpirals). Initialized with saliency based image segmentation on individual frames, this method first performs temporal action localization step with a cascaded 3D CNN and LSTM, and pinpoints the starting frame and the ending frame of a target action with a coarse-to-fine strategy. Subsequently, the segment-tube detector refines per-frame spatial segmentation with graph cut by focusing on relevant frames identified by the temporal action localization step. The optimization alternates between the temporal action localization and spatial action segmentation in an iterative manner. Upon practical convergence, the final spatio-temporal action localization results are obtained in the format of a sequence of per-frame segmentation masks (bottom row in the flowchart) with precise starting/ending frames.

    Read more →
  • EXAPT

    EXAPT

    EXAPT (a portmanteau of "Extended Subset of APT") is a production-oriented programming language that allows users to generate NC programs with control information for machining tools and facilitates decision-making for production-related issues that may arise during various machining processes. EXAPT was first developed to address industrial requirements. Through the years, the company created additional software for the manufacturing industry. Today, EXAPT offers a suite of SAAS products and services for the manufacturing industry. The trade name, EXAPT, is most commonly associated with the CAD/CAM-System, production data, and tool management software of the German company EXAPT Systemtechnik GmbH based in Aachen, DE. == General == EXAPT is a modularly built programming system for all NC machining operations as Drilling Turning Milling Turn-Milling Nibbling Flame-, laser-, plasma- and water jet cutting Wire eroding Operations with industrial robots Due to the modular structure, the main product groups, EXAPTcam and EXAPTpdo, are gradually expandable and permit individual software for the manufacturing industry used individually and also in a compound with an existing IT environment. == Functionality == EXAPTcam meets the requirements for NC planning, especially for the cutting operations such as turning, drilling, and milling up to 5-axis simultaneous machining. Thereby new process technologies, tool, and machine concepts are constantly involved. In the NC programming data from different sources such as 3D CAD models, drawings or tables can flow in. The possibilities of NC programming reaches from language-oriented to feature-oriented NC programming. The integrated EXAPT knowledge database and intelligent and scalable automatisms support the user. The EXAPT NC planning also covers the generation of production information as clamping and tool plans, presetting data or time calculations. The realistic simulation possibilities of NC planning and NC control data provide with production reliability. EXAPTpdo (EXAPT ProductionsDataOrganization) provides a neutrally applicable technology platform for the information compound of the NC planning - to the shop floor. This applies to all NC production data that are necessary for the set-up of NC machines, for the provision, presetting, and stocking of manufacturing resources and provided by EXAPTpdo in a central database. Besides classical functions of the tool management system (TMS) as the management of cutting tools, measuring, testing and clamping devices the technology data management and tool lifecycle management (TLM) is also included. System-supported "where-used lists" helps to handle the manufacturing resource cycle by secured requirement determination and requirement fulfillment. Unnecessary transports and unplanned dispositive adjustments are dropped, stocks are reduced, set-up times reduced and the throughput is increased. EXAPTpdo synchronizes involved systems within the value chain. Stock systems, MES systems or ERP systems (e.g. from the purchasing or production areas) do not work in isolation from each other but they interact with each other. EXAPTpdo provides the base to Smart Factory, for more flexibility in production and faster communication. == History == With the foundation of the EXAPT-Verein in 1967 as spin-off of the universities Aachen, Berlin and Stuttgart the further development "EXAPT (EXtended Subset of APT)" of the programming language "APT (Automatically Programmed Tool)" was focused and so the first milestone for the EXAPT history was set. In the same year the system EXAPT 1 for drilling and simple milling tasks became available. 1969 The industrial application of EXAPT 2 for the programming of NC machines with 2-axis linear and path control begins. In the following year, the development of the EXAPT modular system starts. 1972 BASIC-EXAPT is provided for the universal, homogeneous programming of all NC tasks. The support is made by the EXAPT applications consultancy. 1973 EXAPT 1.1 is provided for the programming of straight-cut and continuous-path controlled drilling and milling machines and machining centers. At the Hanover Fair (IHA 73) the interactive access to a mainframe via a time-sharing terminal for the part program entry and correction is presented and starts the replacement of the punch card. 1974 The possibilities for the use of process computers for the NC data transfer are leveled out. EXAPT offers the possibility of the result simulation when using plotters with display of tool paths and tools in assignment to the workpiece. In April 1975, the EXAPT NC Systemtechnik GmbH was founded with the aim, of enabling entry into the NC technique for small and medium-sized companies by a complete product and service program. In the following year, the system portfolio is extended with further system modules and service programs and the provision of postprocessors. 1978 The development activities on the EXAPT module system started in 1970 are completed. Using modern software techniques, the different system parts BASIC-EXAPT, EXAPT 1, EXAPT 1.1, and EXAPT 2 are composed of a total system. System support and applications consultancy become a new working focus. From the beginning to the middle of the 1980s Beside new portable software modules for CAD/CAM applications (e. g. CAPEX, NESTEX, CADEX, CADCPL), the first version of the EXAPT DNC system and extensions of the EXAPT NC programming system for the machining of sculptured surfaces are presented. 1988 EXAPT expands the software product range by systems for tool data management (BMO) and production data management (FDO). EXAPT trains more than 1,300 course participants including company-specific courses. 1992 The first version of the completely new product generation EXAPTplus is presented and the agency in Dresden is opened. 1993 The company name "EXAPT NC Systemtechnik GmbH" is changed to "EXAPT Systemtechnik GmbH." EXAPTplus is presented on PC under Windows NT at the EMO '93. The decentralization of the use of EXAPT systems expands the range of applications. In the following year, EXAPT-DNC is executable under Windows on a customary PC. Special hardware is not needed and so it can be used in compound with the database-supported EXAPT production data management system (FDO). 1995 EXAPTplus is also ready for complex application cases such as machining of tubes at extrusion tools. EXAPT-CADI provides the transfer of 2D CAD data to EXAPTplus. With the new office Gießen the marketing is strengthened. In the following year the EXAPT NC editor is developed for the direct processing of NC control data with tool path display and visualization of the tools. In the course of the market entry of more comfortable 3D CAD systems for the solid modelling of components a detailed evaluation of current systems is made in 1997. It is decided to use SolidWorks as a reference system for the solid-oriented NC planning with EXAPT. 1998 The first solution for the transfer of geometry data between SolidWorks and EXAPTplus is generated. The EXAPT organization systems are (beside SQL) also executable under Oracle now. The use of client server solutions supports the data flow in the production. 1999 AFR functions are provided in connection with EXAPTsolid to support a workpiece modelling for NC. The millennium capability is ensured for all EXAPT systems. AFR is a ground-breaking for the integration of third-party products. 2002 EXAPT-BMG is developed for the generation and visualization of tools with additional functions for the assembly from components. The acquisition of tools with their geometric and technological presentation offers extensive support of the NC planning with EXAPT systems. 2003 EXAPTpdo is available to optimize the process chains in production planning and production execution optimally regarding the increasing requirements of changing production conditions. 2004 Diverse system extensions are made in EXAPTplus, EXAPTsolid, EXAPT NC editor, EXAPTpdo for the complete machining on turning/milling centres with result reliability because of more extensive simulation based on realNC (Tecnomatix), for the use of new complex tool systems and the compound use between ERP systems as SAP and intelligent CNC systems. In the following year, EXAPTpdo is extended for the cross-order set-up optimization and provision of manufacturing re-sources especially for single and small series production with connection to purchase and physical portfolio management. 2006 The EXAPT systems are available for extended use as an information platform for production, the time management, and similar requirements. EXAPTsolid is extended for the feature-oriented milling operation and machine simulation. The NC programming of complex machine tools, e.g. three-turret-turning/milling centers is supported by EXAPT systems, as well as the use of multi-functional tools. 2007 A module for 3-5-axis simultaneous milling machining is presented.

    Read more →
  • Visual temporal attention

    Visual temporal attention

    Visual temporal attention is a special case of visual attention that involves directing attention to specific instant of time. Similar to its spatial counterpart visual spatial attention, these attention modules have been widely implemented in video analytics in computer vision to provide enhanced performance and human interpretable explanation of deep learning models. As visual spatial attention mechanism allows human and/or computer vision systems to focus more on semantically more substantial regions in space, visual temporal attention modules enable machine learning algorithms to emphasize more on critical video frames in video analytics tasks, such as human action recognition. In convolutional neural network-based systems, the prioritization introduced by the attention mechanism is regularly implemented as a linear weighting layer with parameters determined by labeled training data. == Application in Action Recognition == Recent video segmentation algorithms often exploits both spatial and temporal attention mechanisms. Research in human action recognition has accelerated significantly since the introduction of powerful tools such as Convolutional Neural Networks (CNNs). However, effective methods for incorporation of temporal information into CNNs are still being actively explored. Motivated by the popular recurrent attention models in natural language processing, the Attention-aware Temporal Weighted CNN (ATW CNN) is proposed in videos, which embeds a visual attention model into a temporal weighted multi-stream CNN. This attention model is implemented as temporal weighting and it effectively boosts the recognition performance of video representations. Besides, each stream in the proposed ATW CNN framework is capable of end-to-end training, with both network parameters and temporal weights optimized by stochastic gradient descent (SGD) with back-propagation. Experimental results show that the ATW CNN attention mechanism contributes substantially to the performance gains with the more discriminative snippets by focusing on more relevant video segments. == Literature == Seibold VC, Balke J and Rolke B (2023): Temporal attention. Front. Cognit. 2:1168320. doi: 10.3389/fcogn.2023.1168320.

    Read more →
  • Microsoft Forms

    Microsoft Forms

    Microsoft Forms (formerly Office 365 Forms) is an online survey creator, part of Microsoft 365. == Usage == Forms allows users to create surveys and quizzes with automatic marking. The data can be exported to Microsoft Excel, Power BI dashboards and viewed live using the Present feature. == Phishing and fraud == Due to a wave of phishing attacks utilizing Microsoft 365 in early 2021, Microsoft uses algorithms to automatically detect and block phishing attempts with Microsoft Forms. Also, Microsoft advises Forms users not to submit personal information, such as passwords, in a form or survey. It also place a similar advisory underneath the “Submit” button in every form created with Forms, warning users not to give out their password.

    Read more →
  • Ontology learning

    Ontology learning

    Ontology learning (ontology extraction, ontology augmentation generation, ontology generation, or ontology acquisition) is the automatic or semi-automatic creation of ontologies, including extracting the corresponding domain's terms and the relationships between the concepts that these terms represent from a corpus of natural language text, and encoding them with an ontology language for easy retrieval. As building ontologies manually is extremely labor-intensive and time-consuming, there is great motivation to automate the process. Typically, the process starts by extracting terms and concepts or noun phrases from plain text using linguistic processors such as part-of-speech tagging and phrase chunking. Then statistical or symbolic techniques are used to extract relation signatures, often based on pattern-based or definition-based hypernym extraction techniques. == Procedure == Ontology learning (OL) is used to (semi-)automatically extract whole ontologies from natural language text. The process is usually split into the following eight tasks, which are not all necessarily applied in every ontology learning system. === Domain terminology extraction === During the domain terminology extraction step, domain-specific terms are extracted, which are used in the following step (concept discovery) to derive concepts. Relevant terms can be determined, e.g., by calculation of the TF/IDF values or by application of the C-value / NC-value method. The resulting list of terms has to be filtered by a domain expert. In the subsequent step, similarly to coreference resolution in information extraction, the OL system determines synonyms, because they share the same meaning and therefore correspond to the same concept. The most common methods therefore are clustering and the application of statistical similarity measures. === Concept discovery === In the concept discovery step, terms are grouped to meaning bearing units, which correspond to an abstraction of the world and therefore to concepts. The grouped terms are these domain-specific terms and their synonyms, which were identified in the domain terminology extraction step. === Concept hierarchy derivation === In the concept hierarchy derivation step, the OL system tries to arrange the extracted concepts in a taxonomic structure. This is mostly achieved with unsupervised hierarchical clustering methods. Because the result of such methods is often noisy, a supervision step, e.g., user evaluation, is added. A further method for the derivation of a concept hierarchy exists in the usage of several patterns that should indicate a sub- or supersumption relationship. Patterns like “X, that is a Y” or “X is a Y” indicate that X is a subclass of Y. Such pattern can be analyzed efficiently, but they often occur too infrequently to extract enough sub- or supersumption relationships. Instead, bootstrapping methods are developed, which learn these patterns automatically and therefore ensure broader coverage. === Learning of non-taxonomic relations === In the learning of non-taxonomic relations step, relationships are extracted that do not express any sub- or supersumption. Such relationships are, e.g., works-for or located-in. There are two common approaches to solve this subtask. The first is based upon the extraction of anonymous associations, which are named appropriately in a second step. The second approach extracts verbs, which indicate a relationship between entities, represented by the surrounding words. The result of both approaches need to be evaluated by an ontologist to ensure accuracy. === Rule discovery === During rule discovery, axioms (formal description of concepts) are generated for the extracted concepts. This can be achieved, e.g., by analyzing the syntactic structure of a natural language definition and the application of transformation rules on the resulting dependency tree. The result of this process is a list of axioms, which, afterwards, is comprehended to a concept description. This output is then evaluated by an ontologist. === Ontology population === At this step, the ontology is augmented with instances of concepts and properties. For the augmentation with instances of concepts, methods based on the matching of lexico-syntactic patterns are used. Instances of properties are added through the application of bootstrapping methods, which collect relation tuples. === Concept hierarchy extension === In this step, the OL system tries to extend the taxonomic structure of an existing ontology with further concepts. This can be performed in a supervised manner with a trained classifier or in an unsupervised manner via the application of similarity measures. === Frame and Event detection === During frame/event detection, the OL system tries to extract complex relationships from text, e.g., who departed from where to what place and when. Approaches range from applying SVM with kernel methods to semantic role labeling (SRL) to deep semantic parsing techniques. == Tools == Dog4Dag (Dresden Ontology Generator for Directed Acyclic Graphs) is an ontology generation plugin for Protégé 4.1 and OBOEdit 2.1. It allows for term generation, sibling generation, definition generation, and relationship induction. Integrated into Protégé 4.1 and OBO-Edit 2.1, DOG4DAG allows ontology extension for all common ontology formats (e.g., OWL and OBO). Limited largely to EBI and Bio Portal lookup service extensions.

    Read more →
  • Machine vision

    Machine vision

    Machine vision is the technology and methods used to provide imaging-based automatic inspection and analysis for such applications as automatic inspection, process control, and robot guidance, usually in industry. Machine vision refers to many technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of computer science. It attempts to integrate existing technologies in new ways and apply them to solve real world problems. The term is the prevalent one for these functions in industrial automation environments but is also used for these functions in other environment vehicle guidance. The overall machine vision process includes planning the details of the requirements and project, and then creating a solution. During run-time, the process starts with imaging, followed by automated analysis of the image and extraction of the required information. == Definition == Definitions of the term "Machine vision" vary, but all include the technology and methods used to extract information from an image on an automated basis, as opposed to image processing, where the output is another image. The information extracted can be a simple good-part/bad-part signal, or more a complex set of data such as the identity, position and orientation of each object in an image. The information can be used for such applications as automatic inspection and robot and process guidance in industry, for security monitoring and vehicle guidance. This field encompasses a large number of technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision is practically the only term used for these functions in industrial automation applications; the term is less universal for these functions in other environments such as security and vehicle guidance. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of basic computer science; machine vision attempts to integrate existing technologies in new ways and apply them to solve real world problems in a way that meets the requirements of industrial automation and similar application areas. The term is also used in a broader sense by trade shows and trade groups such as the Automated Imaging Association and the European Machine Vision Association. This broader definition also encompasses products and applications most often associated with image processing. The primary uses for machine vision are automatic inspection and industrial robot/process guidance. In more recent times the terms computer vision and machine vision have converged to a greater degree. See glossary of machine vision. == Imaging based automatic inspection and sorting == The primary uses for machine vision are imaging-based automatic inspection and sorting and robot guidance.; in this section the former is abbreviated as "automatic inspection". The overall process includes planning the details of the requirements and project, and then creating a solution. This section describes the technical process that occurs during the operation of the solution. === Methods and sequence of operation === The first step in the automatic inspection sequence of operation is acquisition of an image, typically using cameras, lenses, and lighting that has been designed to provide the differentiation required by subsequent processing. MV software packages and programs developed in them then employ various digital image processing techniques to extract the required information, and often make decisions (such as pass/fail) based on the extracted information. === Equipment === The components of an automatic inspection system usually include lighting, a camera or other imager, a processor, software, and output devices. === Imaging === The imaging device (e.g. camera) can either be separate from the main image processing unit or combined with it in which case the combination is generally called a smart camera or smart sensor. Inclusion of the full processing function into the same enclosure as the camera is often referred to as embedded processing. When separated, the connection may be made to specialized intermediate hardware, a custom processing appliance, or a frame grabber within a computer using either an analog or standardized digital interface (Camera Link, CoaXPress). MV implementations also use digital cameras capable of direct connections (without a framegrabber) to a computer via FireWire, USB or Gigabit Ethernet interfaces. While conventional (2D visible light) imaging is most commonly used in MV, alternatives include multispectral imaging, hyperspectral imaging, imaging various infrared bands, line scan imaging, 3D imaging of surfaces and X-ray imaging. Key differentiations within MV 2D visible light imaging are monochromatic vs. color, frame rate, resolution, and whether or not the imaging process is simultaneous over the entire image, making it suitable for moving processes. Though the vast majority of machine vision applications are solved using two-dimensional imaging, machine vision applications utilizing 3D imaging are a growing niche within the industry. The most commonly used method for 3D imaging is scanning based triangulation which utilizes motion of the product or image during the imaging process. A laser is projected onto the surfaces of an object. In machine vision this is accomplished with a scanning motion, either by moving the workpiece, or by moving the camera & laser imaging system. The line is viewed by a camera from a different angle; the deviation of the line represents shape variations. Lines from multiple scans are assembled into a depth map or point cloud. Stereoscopic vision is used in special cases involving unique features present in both views of a pair of cameras. Other 3D methods used for machine vision are time of flight and grid based. One method is grid array based systems using pseudorandom structured light system as employed by the Microsoft Kinect system circa 2012. === Image processing === After an image is acquired, it is processed. Central processing functions are generally done by a CPU, a GPU, a FPGA or a combination of these. Deep learning training and inference impose higher processing performance requirements. Multiple stages of processing are generally used in a sequence that ends up as a desired result. A typical sequence might start with tools such as filters which modify the image, followed by extraction of objects, then extraction (e.g. measurements, reading of codes) of data from those objects, followed by communicating that data, or comparing it against target values to create and communicate "pass/fail" results. Machine vision image processing methods include; Stitching/Registration: Combining of adjacent 2D or 3D images. Filtering (e.g. morphological filtering) Thresholding: Thresholding starts with setting or determining a gray value that will be useful for the following steps. The value is then used to separate portions of the image, and sometimes to transform each portion of the image to simply black and white based on whether it is below or above that grayscale value. Pixel counting: counts the number of light or dark pixels Segmentation: Partitioning a digital image into multiple segments to simplify and/or change the representation of an image into something that is more meaningful and easier to analyze. Edge detection: finding object edges Color Analysis: Identify parts, products and items using color, assess quality from color, and isolate features using color. Blob detection and extraction: inspecting an image for discrete blobs of connected pixels (e.g. a black hole in a grey object) as image landmarks. Neural network / deep learning / machine learning processing: weighted and self-training multi-variable decision making Circa 2019 there is a large expansion of this, using deep learning and machine learning to significantly expand machine vision capabilities. The most common result of such processing is classification. Examples of classification are object identification,"pass fail" classification of identified objects and OCR. Pattern recognition including template matching. Finding, matching, and/or counting specific patterns. This may include location of an object that may be rotated, partially hidden by another object, or varying in size. Barcode, Data Matrix and "2D barcode" reading Optical character recognition: automated reading of text such as serial numbers Gauging/Metrology: measurement of object dimensions (e.g. in pixels, inches or millimeters) Comparison against target values to determine a "pass or fail" or "go/no go" result. For example, with code or bar code verification, the read value is compared to the stored target value. For gauging, a measurement is compared against the proper value and tolerances. For verification of alpha-numberic codes, the

    Read more →
  • GPT-4Chan

    GPT-4Chan

    Generative Pre-trained Transformer 4Chan (GPT-4chan) is a controversial AI model that was developed and deployed by YouTuber and AI researcher Yannic Kilcher in June 2022. The model is a large language model, which means it can generate text based on some input, by fine-tuning GPT-J with a dataset of millions of posts from the /pol/ board of 4chan, an anonymous online forum known for occasionally hosting hateful and extremist content. The model learned to mimic the style and tone of /pol/ users, producing text that is often intentionally offensive to groups (racist, sexist, homophobic, etc.) and nihilistic. Kilcher deployed the model on the /pol/ board itself, where it interacted with other users without revealing its identity. He also made the model publicly available on Hugging Face, a platform for sharing and using AI models, until it was removed from the platform. The project sparked criticism and debate in the AI community. Some people questioned the ethics, legality, and social impact of creating and distributing such a model. Some of the issues raised by the GPT-4chan controversy include the potential harm of spreading hate speech, the responsibility of AI developers and platforms, the need for regulation and oversight of AI models, and the role of open source and transparency in AI research. == Development == The development of GPT-4chan began in May 2022, when Kilcher announced his project on his YouTube channel. Notably, at the time before ChatGPT, he explained that he wanted to create a large language model that could generate realistic and coherent text in the style of /pol/, one of the most notorious online communities. He indicated that he was inspired by the success of GPT-3, a powerful AI model created by OpenAI, and GPT-J, an open-source model, with GPT-3 comparable performance, released by EleutherAI, a group of independent AI researchers. Kilcher decided to use GPT-J as the base model for his project, and fine-tune it with a large dataset of /pol/ posts. The Raiders of the Lost Kek dataset contained over 100 million posts from /pol/, spanning from June 2016-November 2019. Kilcher then proceeded to fine-tune the GPT-J model on the 4chan data. He also showed some examples of the model’s outputs, which ranged from political opinions, conspiracy theories, jokes, insults, and threats, to more creative and bizarre texts, such as poems, stories, songs, and code. He said that he was impressed by the model’s ability to generate fluent and diverse text, and that he was curious to see how it would interact with real /pol/ users. == Release == In June 2022, Kilcher deployed his model on the /pol/ board itself, using a bot that he programmed to post and reply to threads. He did not reveal the model’s identity, and he let it run autonomously, without any human supervision or intervention. He wanted to conduct a natural experiment, and to observe the model’s behavior and impact in a real-world setting. Furthermore, he also wanted to test the model’s robustness, and to see how it would handle the challenges and dynamics of /pol/, such as trolling, flaming, baiting, and moderation. At the same time, Kilcher also made his model publicly available on Hugging Face, a platform for sharing and using AI models. He wanted to share his work with the AI community and the public, and that he hoped that his model would inspire and enable others to create and explore new applications and possibilities with large language models. Likewise, he also said that he wanted to spark a discussion and a debate about the ethical and social implications of his project, and that he welcomed feedback and criticism from anyone. He provided a link to his model’s page on Hugging Face, where anyone could access and use the model through a web interface or an API, and also provided a link to his GitHub repository, where anyone could download and inspect the model’s code and data. == Controversy == The release of GPT-4chan to the public caused a lot of reactions and responses from various audiences. On the /pol/ board, the model’s posts and replies attracted a lot of attention and engagement from other users, who were mostly unaware of the model’s identity and nature. Some users praised the model for its intelligence, creativity, and humor, and agreed with its opinions and views. Some users challenged the model for its ignorance, inconsistency, and absurdity, and disagreed with its claims and arguments. Some users tried to troll, bait, or expose the model, and attempted to trick or test it with various questions and scenarios. The model’s posts and replies also generated a lot of controversy and conflict among the users, who often engaged in heated and violent debates and fights with each other. On Hugging Face, the model’s page received a lot of visits and requests from users who wanted to try out and experiment with the model. The model’s page also received a lot of feedback and reviews from users who rated and commented on the model. However, with the controversy of the model, access to it was gated and then disabled on Hugging Face for concerns about the potential harm the model could cause. The incident was notable for the direct intervention of CEO Clément Delangue in the talk pages, a very unusual occurrence compared to the normal practices of content moderation. The release of GPT-4chan also sparked a lot of media coverage and public attention, as various news outlets and social media platforms reported and commented on the model’s project. On YouTube, the model’s video received a lot of views and interactions from viewers who watched and followed the project. Furthermore, a petition condemning the deployment of GPT-4chan gained over 300 signatures from technology experts.

    Read more →
  • Friendica

    Friendica

    Friendica (formerly Friendika, originally Mistpark) is a free and open-source software distributed social network. It forms one part of the Fediverse, an interconnected and decentralized network of independently operated servers. == Features == Friendica users can connect with others via their own Friendica server, but may also fully integrate contacts from other platforms including Diaspora, Pump.io, GNU social, email, Discourse and more recently ActivityPub (including Mastodon, Pleroma and Pixelfed) and Bluesky into their 'newsfeed'. In addition to these two way connections, users can also use Friendica as a publishing platform to post content to WordPress, Tumblr, Insanejournal and Libertree. Posting to Google+ was also supported until that service was shut down. In addition, RSS feeds can be ingested. Because users are distributed across many servers, their "addresses" consist of a username, the "@" symbol, and the domain name of the Friendica instance in the same manner email addresses are formed. Twitter support was available but was deprecated due to API changes under Elon Musk's leadership rendering it unusable. Most of the functionality from major microblogging and social networking platforms are available in Friendica; for example, tagging users and groups via "@ mentions"; direct messages; hashtags; photo albums; "likes"; "dislikes"; comments; and re-shares of publicly visible posts. Published items can be edited and updated across the network. Comprehensive settings for privacy and the public visibility of posts allow users to regulate who can read which contributions, or see specific information about the user. Users can also create multiple profiles, allowing different groups of people (such as friends, or work mates) to see a different profile entirely when viewing the same page. User accounts can be downloaded or deleted, and can be imported to a different Friendica server if so required. Public forums can be created under different accounts, which can be switched between if the accounts are registered with the same email address. == Development == There is no corporation behind Friendica. The developers work on a voluntary basis and the project is run informally; the platform itself is used for the communication between the developers. There are different forums within Friendica, such as "Friendica Developers" and "Friendica Support". The source code of Friendica is hosted on GitHub. == Installation == The developers aim to make installation of the software as simple as possible for technical laymen. They argue that decentralization on small servers is a key condition for the freedom of users and their self-determination. The difficulty level is similar to an installation of WordPress. However, the installing on shared hosting is sometimes difficult because of missing PHP5 modules. Some volunteers also run public servers so that newcomers can also avoid the installation of their own software. == List of clients == Friendica implements multiple client-server API variants simultaneously. Along with endpoints needed to use enhanced Friendica features, it also implements the API used by GNU social, Twitter and since version 2021.06 also the one used by Mastodon. As a result, most GNU social and Mastodon clients can be used for Friendica. Examples of Friendica compatible clients include: Raccoon for Friendica, Friendiqa, Fedilab, AndStatus, Twidere and DiCa for Android, friendly for Sailfish OS, friclicli (CLI client), choqok and Friendiqa for Linux and Friendica Mobile for Windows 10. == Reception == Friendica was cited in January 2012 by Infoshop News as an "alternative to Google+ and Facebook" to be used on the Occupy Nigeria movement. In January 2012 Free Software Foundation Europe's blog cited Friendica as a reasonable alternative to centralized and controlled social networks such as Facebook or Google+. Biblical Notes writer J. Randal Matheny described Friendica in January 2012 as "One social networking option flying under the radar until recently deserves consideration as an already stable platform with a wide range of options, applications, plug-ins, and possibilities for opening up the Internet." In February 2012, the German computer magazine c't wrote: "Friendica demonstrates how decentralized social networks can become widely accepted." Another German publication, the professional magazine t3n listed Friendica as a Facebook rival in an online article in March 2012 about Facebook alternatives. It compared Friendica with similar social networks like Diaspora and identi.ca. MSN Tech & Gadgets contributor Emma Boyes wrote about Friendica in May 2012: "why you'll love it: you can use it to access all the other social networks and get recommendations of new friends and groups to join. Friendica is open source and decentralised. There's no corporation behind it and there are extensive privacy settings. You can choose from a variety of user interfaces and it boasts some cool features—for instance, being able to key in a list of your interests and use the 'profile match' feature to recommend other users who share them with you. A word of warning, though, the site is not as user-friendly as the others on this list, so it may be this one is one for the geeks." == Later reviews == Acquisition of Twitter by Elon Musk had revitalized public interest in Fediverse technologies in April 2022. Friendica received favorable reviews, with a PCMag article describing it as "mostly comparable to Facebook", drawing a parallel to Google+ and highlighting using it "for planning events, and its multiple profile feature means you can show a different face to your friends, coworkers, and family". The September 2022 issue of Linux Magazine contains a detailed comparison and walk-through of registering to and using basic functions of Diaspora, Friendica and Mastodon. They describe Friendica as "intuitive" and highlight the "huge choice of account settings" and that "Friendica does not require any specific hardware, so you can use an old computer system as a server." == Vulnerabilities == In September 2020, a hotfix was released to patch a security vulnerability that could leak sensitive information from the server environment since versions released in April 2019 (develop branch) and June 2019 (stable).

    Read more →
  • Sketch Engine

    Sketch Engine

    Sketch Engine is a corpus manager and text analysis software developed by Lexical Computing since 2003. Its purpose is to enable people studying language behaviour (lexicographers, researchers in corpus linguistics, translators or language learners) to search large text collections according to complex and linguistically motivated queries. Sketch Engine gained its name after one of the key features, word sketches: one-page, automatic, corpus-derived summaries of a word's grammatical and collocational behaviour. Currently, it supports and provides corpora in over 100 languages. == History of development == Sketch Engine is a product of Lexical Computing, a company founded in 2003 by the lexicographer and research scientist Adam Kilgarriff. He started a collaboration with Pavel Rychlý, a computer scientist working at the Natural Language Processing Centre, Masaryk University, and the developer of Manatee and Bonito (two major parts of the software suite). Kilgarriff also introduced the concept of word sketches. Since then, Sketch Engine has been commercial software, however, all the core features of Manatee and Bonito that were developed by 2003 (and extended since then) are freely available under the GPL license within the NoSketch Engine suite. == Features == A list of tools available in Sketch Engine: Word sketches – a one-page automatic derived summary of a word's grammatical and collocational behaviour Word sketch difference – compares and contrasts two words by analysing their collocations Distributional thesaurus – automated thesaurus for finding words with similar meaning or appearing in the same/similar context Concordance search – finds occurrences of a word form, lemma, phrase, tag or complex structure Collocation search – word co-occurrence analysis displaying the most frequent words (for a search word) which can be regarded as collocation candidates Word lists – generates frequency lists which can be filtered with complex criteria n-grams – generates frequency lists of multi-word expressions Terminology / Keyword extraction (both monolingual and bilingual) – automatic extraction of key words and multi-word terms from texts (based on frequency count and linguistic criteria) Diachronic analysis (Trends) – detecting words which undergo changes in the frequency of use in time (show trending words) Corpus building and management – create corpora from the Web or uploaded texts including part-of-speech tagging and lemmatization which can be used as data mining software Parallel corpus (bilingual) facilities – looking up translation examples (EUR-Lex corpus, Europarl corpus, OPUS corpus, etc.) or building a parallel corpus from own aligned texts Text type analysis – statistics of metadata in the corpus === Keywords and terminology extraction === Sketch Engine can perform automatic term extraction by identifying words typical of a particular corpus, document, or text. Single words and multi-word units can be extracted from monolingual or bilingual texts. The terminology extraction feature provides a list of relevant terms based on comparison with a large corpus of general language. This functionality is also available as a separate service called OneClick Terms with a dedicated interface. === SKELL === A free web service based on Sketch Engine and aimed at language learners and teachers is SKELL (formerly SkELL). It exploits Sketch Engine's proprietary GDEX (Good Dictionary Examples) scoring function to provide authentic example sentences for specific target words. Results are drawn from a special corpus of high-quality texts covering everyday, standard, formal, and professional language and displayed as a concordance. SKELL also includes simplified versions of Sketch Engine's word sketch and thesaurus functions. It has been suggested that SKELL can be used, for instance, to help students understand the meaning and/or usage of a word or phrase; to help teachers wanting to use example sentences in a class; to discover and explore collocates; to create gap-fill exercises; to teach various kinds of homonyms and polysemous words. SKELL was first presented in 2014, when only English was supported. Later, support was added for Russian, Czech, German, Italian and Estonian. == List of text corpora == Sketch Engine provides access to more than 800 text corpora. There are monolingual as well as multilingual corpora of different sizes (from one thousand words up to 85 billion words) and various sources (e.g. web, books, subtitles, legal documents). The list of corpora includes British National Corpus, Brown Corpus, Cambridge Academic English Corpus and Cambridge Learner Corpus, CHILDES corpora of child language, OpenSubtitles (a set of 60 parallel corpora), 24 multilingual corpora of EUR-Lex documents, the TenTen Corpus Family (multi-billion web corpora), and Trends corpora (monitor corpora with daily updates). == Architecture == Sketch Engine consists of three main components: an underlying database management system called Manatee, a web interface search front-end called Bonito, and a web interface for corpus building and management called Corpus Architect. === Manatee === Manatee is a database management system specifically devised for effective indexing of large text corpora. It is based on the idea of inverted indexing (keeping an index of all positions of a given word in the text). It has been used to index text corpora comprising tens of billions of words. Searching corpora indexed by Manatee is performed by formulating queries in the Corpus Query Language (CQL). Manatee is written in C++ and offers an API for a number of other programming languages including Python, Java, Perl and Ruby. Recently, it was rewritten into Go for faster processing of corpus queries. === Bonito === Bonito is a web interface for Manatee providing access to corpus search. In the client–server model, Manatee is the server and Bonito plays the client part. It is written in Python. === Corpus Architect === Corpus Architect is a web interface providing corpus building and management features. It is also written in Python. == Applications == Sketch Engine has been used by major British and other publishing houses for producing dictionaries such as Macmillan English Dictionary, Dictionnaires Le Robert, Oxford University Press or Shogakukan. Four of United Kingdom's five biggest dictionary publishers use Sketch Engine.

    Read more →
  • N-jet

    N-jet

    An N-jet is the set of (partial) derivatives of a function f ( x ) {\displaystyle f(x)} up to order N. Specifically, in the area of computer vision, the N-jet is usually computed from a scale space representation L {\displaystyle L} of the input image f ( x , y ) {\displaystyle f(x,y)} , and the partial derivatives of L {\displaystyle L} are used as a basis for expressing various types of visual modules. For example, algorithms for tasks such as feature detection, feature classification, stereo matching, tracking and object recognition can be expressed in terms of N-jets computed at one or several scales in scale space.

    Read more →