Machine vision is the technology and methods used to provide imaging-based automatic inspection and analysis for such applications as automatic inspection, process control, and robot guidance, usually in industry. Machine vision refers to many technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of computer science. It attempts to integrate existing technologies in new ways and apply them to solve real world problems. The term is the prevalent one for these functions in industrial automation environments but is also used for these functions in other environment vehicle guidance. The overall machine vision process includes planning the details of the requirements and project, and then creating a solution. During run-time, the process starts with imaging, followed by automated analysis of the image and extraction of the required information. == Definition == Definitions of the term "Machine vision" vary, but all include the technology and methods used to extract information from an image on an automated basis, as opposed to image processing, where the output is another image. The information extracted can be a simple good-part/bad-part signal, or more a complex set of data such as the identity, position and orientation of each object in an image. The information can be used for such applications as automatic inspection and robot and process guidance in industry, for security monitoring and vehicle guidance. This field encompasses a large number of technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision is practically the only term used for these functions in industrial automation applications; the term is less universal for these functions in other environments such as security and vehicle guidance. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of basic computer science; machine vision attempts to integrate existing technologies in new ways and apply them to solve real world problems in a way that meets the requirements of industrial automation and similar application areas. The term is also used in a broader sense by trade shows and trade groups such as the Automated Imaging Association and the European Machine Vision Association. This broader definition also encompasses products and applications most often associated with image processing. The primary uses for machine vision are automatic inspection and industrial robot/process guidance. In more recent times the terms computer vision and machine vision have converged to a greater degree. See glossary of machine vision. == Imaging based automatic inspection and sorting == The primary uses for machine vision are imaging-based automatic inspection and sorting and robot guidance.; in this section the former is abbreviated as "automatic inspection". The overall process includes planning the details of the requirements and project, and then creating a solution. This section describes the technical process that occurs during the operation of the solution. === Methods and sequence of operation === The first step in the automatic inspection sequence of operation is acquisition of an image, typically using cameras, lenses, and lighting that has been designed to provide the differentiation required by subsequent processing. MV software packages and programs developed in them then employ various digital image processing techniques to extract the required information, and often make decisions (such as pass/fail) based on the extracted information. === Equipment === The components of an automatic inspection system usually include lighting, a camera or other imager, a processor, software, and output devices. === Imaging === The imaging device (e.g. camera) can either be separate from the main image processing unit or combined with it in which case the combination is generally called a smart camera or smart sensor. Inclusion of the full processing function into the same enclosure as the camera is often referred to as embedded processing. When separated, the connection may be made to specialized intermediate hardware, a custom processing appliance, or a frame grabber within a computer using either an analog or standardized digital interface (Camera Link, CoaXPress). MV implementations also use digital cameras capable of direct connections (without a framegrabber) to a computer via FireWire, USB or Gigabit Ethernet interfaces. While conventional (2D visible light) imaging is most commonly used in MV, alternatives include multispectral imaging, hyperspectral imaging, imaging various infrared bands, line scan imaging, 3D imaging of surfaces and X-ray imaging. Key differentiations within MV 2D visible light imaging are monochromatic vs. color, frame rate, resolution, and whether or not the imaging process is simultaneous over the entire image, making it suitable for moving processes. Though the vast majority of machine vision applications are solved using two-dimensional imaging, machine vision applications utilizing 3D imaging are a growing niche within the industry. The most commonly used method for 3D imaging is scanning based triangulation which utilizes motion of the product or image during the imaging process. A laser is projected onto the surfaces of an object. In machine vision this is accomplished with a scanning motion, either by moving the workpiece, or by moving the camera & laser imaging system. The line is viewed by a camera from a different angle; the deviation of the line represents shape variations. Lines from multiple scans are assembled into a depth map or point cloud. Stereoscopic vision is used in special cases involving unique features present in both views of a pair of cameras. Other 3D methods used for machine vision are time of flight and grid based. One method is grid array based systems using pseudorandom structured light system as employed by the Microsoft Kinect system circa 2012. === Image processing === After an image is acquired, it is processed. Central processing functions are generally done by a CPU, a GPU, a FPGA or a combination of these. Deep learning training and inference impose higher processing performance requirements. Multiple stages of processing are generally used in a sequence that ends up as a desired result. A typical sequence might start with tools such as filters which modify the image, followed by extraction of objects, then extraction (e.g. measurements, reading of codes) of data from those objects, followed by communicating that data, or comparing it against target values to create and communicate "pass/fail" results. Machine vision image processing methods include; Stitching/Registration: Combining of adjacent 2D or 3D images. Filtering (e.g. morphological filtering) Thresholding: Thresholding starts with setting or determining a gray value that will be useful for the following steps. The value is then used to separate portions of the image, and sometimes to transform each portion of the image to simply black and white based on whether it is below or above that grayscale value. Pixel counting: counts the number of light or dark pixels Segmentation: Partitioning a digital image into multiple segments to simplify and/or change the representation of an image into something that is more meaningful and easier to analyze. Edge detection: finding object edges Color Analysis: Identify parts, products and items using color, assess quality from color, and isolate features using color. Blob detection and extraction: inspecting an image for discrete blobs of connected pixels (e.g. a black hole in a grey object) as image landmarks. Neural network / deep learning / machine learning processing: weighted and self-training multi-variable decision making Circa 2019 there is a large expansion of this, using deep learning and machine learning to significantly expand machine vision capabilities. The most common result of such processing is classification. Examples of classification are object identification,"pass fail" classification of identified objects and OCR. Pattern recognition including template matching. Finding, matching, and/or counting specific patterns. This may include location of an object that may be rotated, partially hidden by another object, or varying in size. Barcode, Data Matrix and "2D barcode" reading Optical character recognition: automated reading of text such as serial numbers Gauging/Metrology: measurement of object dimensions (e.g. in pixels, inches or millimeters) Comparison against target values to determine a "pass or fail" or "go/no go" result. For example, with code or bar code verification, the read value is compared to the stored target value. For gauging, a measurement is compared against the proper value and tolerances. For verification of alpha-numberic codes, the
Computational humor
Computational humor is a branch of computational linguistics and artificial intelligence which uses computers in humor research. It is a relatively new area, with the first dedicated conference organized in 1996. The first "computer model of a sense of humor" was suggested by Suslov as early as 1992. Investigation of the general scheme of the information processing show a possibility of a specific malfunction, conditioned by the necessity of a quick deletion from consciousness of a false version. This specific malfunction can be identified with a humorous effect on the psychological grounds; however, an essentially new ingredient, a role of timing, is added to a well known role of ambiguity. In biological systems, a sense of humour inevitably develops in the course of evolution, because its biological function consists in quickening the transmission of processed information into consciousness and in a more effective use of brain resources. A realization of this algorithm in neural networks explains naturally the mechanism of laughter: deletion of a false version corresponds to zeroing of some part of the neural network and excessive energy of neurons is thrown out to the motor cortex, arousing muscular contractions. Unfortunately, a practical realization of this algorithm needs extensive databases, whose creation in the automatic regime was suggested only recently . As a result, this magistral direction was not developed properly and subsequent investigations (see below) accepted somewhat specialized colouring. == Joke generators == === Pun generation === An approach to analysis of humor is classification of jokes. A further step is an attempt to generate jokes basing on the rules that underlie classification. Simple prototypes for computer pun generation were reported in the early 1990s, based on a natural language generator program, VINCI. Graeme Ritchie and Kim Binsted in their 1994 research paper described a computer program, JAPE, designed to generate question-answer-type puns from a general, i.e., non-humorous, lexicon. (The program name is an acronym for "Joke Analysis and Production Engine".) Some examples produced by JAPE are: Q: What is the difference between leaves and a car? A: One you brush and rake, the other you rush and brake. Q: What do you call a strange market? A: A bizarre bazaar. Since then the approach has been improved, and the latest report, dated 2007, describes the STANDUP joke generator, implemented in the Java programming language. The STANDUP generator was tested on children within the framework of analyzing its usability for language skills development for children with communication disabilities, e.g., because of cerebral palsy. (The project name is an acronym for "System To Augment Non-speakers' Dialog Using Puns" and an allusion to standup comedy.) Children responded to this "language playground" with enthusiasm, and showed marked improvement on certain types of language tests. The two young people, who used the system over a ten-week period, regaled their peers, staff, family and neighbors with jokes such as: "What do you call a spicy missile? A hot shot!" Their joy and enthusiasm at entertaining others was inspirational. === Other === Stock and Strapparava described a program to generate funny acronyms. == Joke recognition == A statistical machine learning algorithm to detect whether a sentence contained a "That's what she said" double entendre was developed by Kiddon and Brun (2011). There is an open-source Python implementation of Kiddon & Brun's TWSS system. A program to recognize knock-knock jokes was reported by Taylor and Mazlack. This kind of research is important in analysis of human–computer interaction. An application of machine learning techniques for the distinguishing of joke texts from non-jokes was described by Mihalcea and Strapparava (2006). Takizawa et al. (1996) reported on a heuristic program for detecting puns in the Japanese language. == Applications == A possible application for assistance in language acquisition is described in the section "Pun generation". Another envisioned use of joke generators is in cases of a steady supply of jokes where quantity is more important than quality. Another obvious, yet remote, direction is automated joke appreciation. It is known that humans interact with computers in ways similar to interacting with other humans that may be described in terms of personality, politeness, flattery, and in-group favoritism. Therefore, the role of humor in human–computer interaction is being investigated. In particular, humor generation in user interface to ease communications with computers was suggested. Craig McDonough implemented the Mnemonic Sentence Generator, which converts passwords into humorous sentences. Based on the incongruity theory of humor, it is suggested that the resulting meaningless but funny sentences are easier to remember. For example, the password AjQA3Jtv is converted into "Arafat joined Quayle's Ant, while TARAR Jeopardized thurmond's vase," an example chosen by combining politicians names with verbs and common nouns. == Related research == John Allen Paulos is known for his interest in mathematical foundations of humor. His book Mathematics and Humor: A Study of the Logic of Humor demonstrates structures common to humor and formal sciences (mathematics, linguistics) and develops a mathematical model of jokes based on catastrophe theory. Conversational systems which have been designed to take part in Turing test competitions generally have the ability to learn humorous anecdotes and jokes. Because many people regard humor as something particular to humans, its appearance in conversation can be quite useful in convincing a human interrogator that a hidden entity, which could be a machine or a human, is in fact a human.
Algorithmic mechanism design
Algorithmic mechanism design (AMD) lies at the intersection of economic game theory, optimization, and computer science. The prototypical problem in mechanism design is to design a system for multiple self-interested participants, such that the participants' self-interested actions at equilibrium lead to good system performance. Typical objectives studied include revenue maximization and social welfare maximization. Algorithmic mechanism design differs from classical economic mechanism design in several respects. It typically employs the analytic tools of theoretical computer science, such as worst case analysis and approximation ratios, in contrast to classical mechanism design in economics which often makes distributional assumptions about the agents. It also considers computational constraints to be of central importance: mechanisms that cannot be efficiently implemented in polynomial time are not considered to be viable solutions to a mechanism design problem. This often, for example, rules out the classic economic mechanism, the Vickrey–Clarke–Groves auction. == History == Noam Nisan and Amir Ronen first coined "Algorithmic mechanism design" in a research paper published in 1999.
KiSAO
The Kinetic Simulation Algorithm Ontology (KiSAO) supplies information about existing algorithms available for the simulation of systems biology models, their characterization and interrelationships. KiSAO is part of the BioModels.net project and of the COMBINE initiative. == Structure == KiSAO consists of three main branches: simulation algorithm simulation algorithm characteristic simulation algorithm parameter The elements of each algorithm branch are linked to characteristic and parameter branches using has characteristic and has parameter relationships accordingly. The algorithm branch itself is hierarchically structured using relationships which denote that the descendant algorithms were derived from, or specify, more general ancestors.
Open Compute Project
The Open Compute Project (OCP) is an organization that facilitates the sharing of data center product designs and industry best practices among companies. Founded in 2011, OCP has significantly influenced the design and operation of large-scale computing facilities worldwide. As of February 2025, over 400 companies across the world are members of OCP, including Arm, Meta, IBM, Wiwynn, Intel, Nokia, Google, Microsoft, Seagate Technology, Dell, Rackspace, Hewlett Packard Enterprise, NVIDIA, Cisco, Goldman Sachs, Fidelity, Lenovo, Accton Technology Corporation and Alibaba Group. == Structure == The Open Compute Project Foundation is a 501(c)(6) non-profit incorporated in the state of Delaware, United States. OCP has multiple committees, including the board of directors, advisory board and steering committee to govern its operations. As of July 2020, there are seven members who serve on the board of directors which is made up of one individual member and six organizational members. Mark Roenigk (Facebook) is the Foundation's president and chairman. Andy Bechtolsheim is the individual member. In addition to Mark Roenigk who represents Facebook, other organizations on the Open Compute board of directors include Intel (Rebecca Weekly), Microsoft (Kushagra Vaid), Google (Partha Ranganathan), and Rackspace (Jim Hawkins). A list of members can be found on the OCP website. == History == The Open Compute Project began at Facebook (now Meta) in 2009 as an internal project called "Project Freedom". The hardware designs and engineering teams were led by Amir Michael (Manager, Hardware Design) and sponsored by Jonathan Heiliger (VP, Technical Operations) and Frank Frankovsky (Director, Hardware Design and Infrastructure). The three would later open source the designs of Project Freedom and co-found the Open Compute Project. The project was announced at a press event at Facebook's headquarters in Palo Alto on April 7, 2011. == OCP projects == The Open Compute Project Foundation maintains a number of OCP projects, such as: === Server designs === In 2013, two years after the Open Compute Project had started, it was noted that the goal of a more modular server design was "still a long way from live data centers". However, by then some aspects published had been used in Facebook's Prineville data center to improve energy efficiency, as measured by the power usage effectiveness index defined by The Green Grid. Efforts to advance server compute node designs included one for Intel processors and one for AMD processors. Also in 2013, Calxeda contributed a design with ARM architecture processors. Since then, several generations of OCP server designs have been deployed: Wildcat (Intel), Spitfire (AMD), Windmill (Intel E5-2600), Watermark (AMD), Winterfell (Intel E5-2600 v2) and Leopard (Intel E5-2600 v3). === OCP Accelerator Module === OCP Accelerator Module (OAM) is a design specification for hardware architectures that implement artificial intelligence systems that require high module-to-module bandwidth. OAM is used in some of AMD's Instinct accelerator modules. === Rack and power designs === Designs for a mechanical mounting system to replace standard 19-inch racks have been published, with a cabinet the same outside width (600 mm) and depth as existing racks, but with an interior space allowing for wider equipment chassis with a 537 mm width (21 inches). This allows more equipment to fit in the same volume and improves air flow. Compute chassis sizes are defined in multiples of an OpenU or OU, which is 48 mm, slightly taller than the 44 mm rack unit defined for 19-inch racks. As of March 2026, the most current base mechanical definition is the Open Rack V3.1 Specification. At the time the base specification was released, Meta also defined in greater depth the specifications for the rectifiers and power shelf. Specifications for the power monitoring interface (PMI), a communications interface enabling upstream communications between the rectifiers and battery backup unit(BBU) were published by Meta that same year, with Delta Electronics as the main technical contributor to the BBU spec. However, since 2022 the AI boom in the data center has created higher power requirements in order to satisfy the demands of AI accelerators that have been released. As of September 2024, Meta is in the process of updating its Open Rack v3 rectifier, power shelf, battery backup and power management interface specifications to accommodate this increased energy demand. In May 2024, at an Open Compute regional summit, Meta and Rittal outlined their plans for development of their High Power Rack (HPR) ecosystem in conjunction with rack, power and cable partners, increasing power capacity in the rack to 92 kilowatts or more. At the same meeting, Delta Electronics and Advanced Energy reported on their progress in developing new Open Compute standard specifications for power shelf and rectifier designs for HPR applications. Rittal also outlined their collaboration with Meta in designing airflow containment, busbar designs and grounding schemes for the new HPR requirements. === Data storage === Open Vault storage building blocks (also called "Knox") offer high disk densities, with 30 drives in a 2 OU Open Rack chassis designed for easy disk drive replacement. The 3.5 inch disks are stored in two drawers, five across and three deep in each drawer, with connections via serial attached SCSI. There is a "cold storage" variant where idle disks power down to reduce energy consumption. Another design concept was contributed by Hyve Solutions, a division of Synnex, in 2012. At the OCP Summit 2016 Facebook, together with Taiwanese ODM Wistron's spin-off Wiwynn, introduced "Lightning", a flexible NVMe JBOF (just a bunch of flash), based on the existing Open Vault (Knox) design. === Energy efficient data centers === The OCP has published data center designs for energy efficiency. These include power distribution at three-phase 277/480 VAC, which eliminates one transformer stage in typical North American data centers, a single voltage (12.5 VDC) power supply designed to work with 277/480 VAC input, and 48 VDC battery backup. For European (and other 230V countries) datacenters, there is a specification for 230/400 VAC power distribution and its conversion to 12.5 VDC. === Open networking switches === On May 8, 2013, an effort to define an open network switch was announced. The plan was to allow Facebook to load its own operating system software onto its top-of-rack switches. Press reports predicted that more expensive and higher-performance switches would continue to be popular, while less expensive products treated more like a commodity. The first attempt at an open networking switch by Facebook was designed together with Taiwanese ODM Accton using Broadcom Trident II chip and is called "Wedge"; the Linux OS that it runs is called "FBOSS". Later switch contributions include "6-pack" and Wedge-100, based on Broadcom Tomahawk chips. Similar switch hardware designs have been contributed by: Accton Technology Corporation (and its Edgecore Networks subsidiary), Mellanox Technologies, Interface Masters Technologies, Agema Systems. Capable of running Open Network Install Environment (ONIE)-compatible network operating systems such as Cumulus Linux, Switch Light OS by Big Switch Networks, or PICOS by Pica8. A similar project for a custom switch for the Google platform had been rumored, and evolved to use the OpenFlow protocol. === Servers === A sub-project for Mezzanine (NIC) OCP NIC 3.0 specification 1v00 was released in late 2019 establishing three form factors: SFF, TSFF, and LFF. == Litigation == In March, 2015, BladeRoom Group Limited and Bripco (UK) Limited sued Facebook, Emerson Electric Co. and others alleging that Facebook has disclosed BladeRoom and Bripco's trade secrets for prefabricated data centers in the Open Compute Project. Facebook petitioned for the lawsuit to be dismissed, but this was rejected in 2017. A confidential mid-trial settlement was agreed in April 2018.
Artificial reproduction
Artificial reproduction is the re-creation of life brought about by means other than natural ones. It is new life built by human plans and projects. Examples include artificial selection, artificial insemination, in vitro fertilization, artificial womb, artificial cloning, and kinematic replication. Artificial reproduction is one aspect of artificial life. Artificial reproduction can be categorized into one of two classes according to its capacity to be self-sufficient: non-assisted reproductive technology and assisted reproductive technology. Cutting plants' stems and placing them in compost is a form of assisted artificial reproduction, xenobots are an example of a more autonomous type of reproduction, while the artificial womb presented in the movie the Matrix illustrates a non assisted hypothetical technology. The idea of artificial reproduction has led to various technologies. == Theology == Humans have aspired to create life since immemorial times. Most theologies and religions have conceived this possibility as exclusive of deities. Christian religions consider the possibility of artificial reproduction, in most cases, as heretical and sinful. == Philosophy == Although ancient Greek philosophy raised the concept that man could imitate the creative capacity of nature, classic Greeks thought that if possible, human beings would reproduce things as nature does, and vice versa, nature would do the things that man does in the same way. Aristotle, for example, wrote that if nature made tables, it would make them just as men do. In other words, Aristotle said that if nature were to create a table, such table will look like a human-made table. Correspondingly, Descartes envisioned the human body, and nature, as a machine. Cartesian philosophy does not stop seeing a perfect mirror between nature and the artificial. However, Kant revolutionized this old idea by criticizing such naturalism. Kant pedagogically wrote: "Reason, in order to be taught by nature, must approach nature with its principles in one hand, according to which the agreement among appearances can count as laws, and, in the other hand, the experiment thought out in accord with these principles—in order to be instructed by nature not like a pupil, who has recited to him whatever the teacher wants to say, but like an appointed judge who compels witnesses to answer the questions he puts to them.". Humans are not instructed by nature but rather use nature as raw material to invent. Humans find alternatives to the natural restrictions imposed by natural laws thus, nature is not necessarily mirrored. In accordance with Kant (and contrary to what Aristotle thought) Karl Marx, Alfred Whitehead, Jaques Derrida and Juan David García Bacca noticed that nature is incapable of reproducing tables; or airplanes, or submarines, or computers. If nature tried to create airplanes, it would produce birds. If nature tried to create submarines, it would get fishes. If nature tried to create computers, brains would grow. And if nature tried to create man, modern man, monkeys will be evolved. According to Whitehead, if we look for something natural in artificial life, in the most elaborate cases, if anything, only atoms remain natural. Juan David Garcia Bacca summarized, “It will not come out from wood, it will not be born, a galley; from clay, a vessel; from linen, a dress; from iron, a lever,...From natural, artificial. In the artificial, the natural is reduced to a simple raw material, even though it is perfectly specified with natural specification. The artificial is the real, positive, and original negation of the natural: of species, of genus and of essence. Thus, its ontology is superior to natural ontology. And for this very reason Marx did not attach any importance to Darwin, whose evolutionism is confined to the natural order: to changes, at most, from variety to variety, from species to species... natural. For the same reason, nature has no dialectics, even though continuous evolution and selection can occur. The dialectic cannot emerge from the natural, for deeper reasons than, using today's terms, from a bird, an airplane cannot emerge; from fish, a submarine; from ears, a telephone; from eyes, a television; from a brain, a digital computer; from feet, a car; from hands, an engine; from Euclid, Descartes; from Aristotle, Newton; from Plato, Marx.” According to García Bacca, the major difference between natural causes and artificial causes is that nature does not have plans and projects, while humans design things following plans and projects. In contrast, other influential authors such as Michael Behe have depicted the concept and promoted the idea of intelligent design, a notion that has aroused several doubts and heated controversies, as it reframe natural causes in accordance with a natural plan. Previous ideas that have also provided a positive 'sense' to natural reproduction, are orthogenesis, syntropy, orgone and morphic resonance, among others. Although, these ideas have been historically marginalized and often called pseudoscience, recently Bio-semioticians are reconsidering some of them under symbolic approaches. Current metaphysics of science actually recognizes that the artificial ways of reproduction are diverse from nature, i.e., unnatural, anti-natural or supernatural. Because Biosemiotics does not focus on the function of life but on its meaning, it has a better understanding of the artificial than classic biology. == Science == Biology, being the study of cellular life, addresses reproduction in terms of growth and cellular division (i.e., binary fission, mitosis and meiosis); however, the science of artificial reproduction is not restricted by the mirroring of these natural processes.The science of artificial reproduction is actually transcending the natural forms, and natural rules, of reproduction. For example, xenobots have redefined the classical conception of reproduction. Although xenobots are made of eukariotic cells they do not reproduce by mitosis, but rather by kinematic replication. Such constructive replication does not involve growing but rather building. == Assisted reproductive technologies == Assisted reproductive technology (ART)'s purpose is to assist the development of a human embryo, commonly because of medical concerns due to fertility limitations. == Non-assisted reproductive technologies == Non-assisted reproductive technologies (NART) could have medical motivations but are mostly driven by a wider heterotopic ambition. Although, NARTs are initially designed by humans, they are programed to become independent of humans to a relative or absolute extent. James Lovelock proposed that such novelties could overcome humans. === Artificial cloning === Cloning is the cellular reproductive processes where two or more genetically identical organisms are created, either by natural or artificial means. Artificial cloning normally involves editing the genetic code, somatic cell nuclear transfer and 3D bioprinting. === Non-assisted artificial womb === A non-assisted artificial womb or artificial uterus is a device that allow for ectogenesis or extracorporeal pregnancy by growing an embryonic form outside the body of an organism (that would normally carry the embryo to term) without any human assistance. The aspect of non-assistance is the key distinction between the current artificial womb technology (AWT) in modern medical research, which still relies on human assistance. With this non-assisted hypothetical technology, a zygote or stem cells are used to create an embryo that is then incubated and monitored by artificial intelligence (AI) within a chamber composed of biocompatible material. The AI maintains the necessary conditions for the embryo to develop and thrive, proceeding to mimic organic labor and childbirth in order to best help the embryo adjust to the outside world. Ectogenesis—gestation, depicted in the science fiction movie The Matrix, is a fast approaching reality. This type of innovation presupposes that vertebrate wombs are not the only way for bearing humans or other similar forms of life. === Kinematic replication === Self-replication without binary fission, meiosis, mitosis (or any other form of cellular reproduction that involves division and growing) can be achieved. Xenobots are an example of kinematic replication. They are biobots, named after the African clawed frog (Xenopus laevis). Xenobots are cellular life forms designed by using artificial intelligence to build more of themselves by combining frog cells in a liquid medium. The term kinematic replication is usually reserved for biomolecules (e.g. DNA, RNA, prions, etc.) and artificially designed cellular forms (e.g. xenobots). === Machine constructive replication === Machine constructive replication mimics human traditional manufacturing but is entirely self-automated. Such constructive replication is a more general form of kinematic replication, which does not necessarily
Secure Electronic Delivery
Secure Electronic Delivery (SED) is a service created in 2003 and provided by the British Library Document Supply Service (BLDSS). Its purpose is to enable faster delivery of digital materials as encrypted, copyright-compliant PDF Documents, to a personal e-mail address. These documents are supplied from the British Library via its On Demand service. When the British Library supplies articles electronically, it sends them securely in order to ensure its usage is permitted (research purposes) and copyright law is observed. == Methods == As the publishing industry, authors and creators become highly protective of their assets and intellectual property, they impose strict rules on delivery methods to prevent copyright infringement. Nowadays, DRM-enabled secure delivery appears to be the most widely used solution to address issues faced by libraries in supplying ebooks and digital materials to their users. SED, one of these solutions, is using Adobe LiveCycle Digital Rights Management (LCDRM) as an encryption method to deliver documents. == Advantages == SED offers convenience, quality and speed as documents are delivered upon request at any location and on any device. Requested articles are scanned for high quality reproduction, opened anywhere on any machine, including mobile devices. == Restrictions == The following are restrictions hold in a SED service implementation: The digital material is accessible only for 14 days via a link sent to a personal message. Due to copyright reasons, the material can be opened only once, saved for 14 days and does not allow a copy-paste action. Upon display, the material must be printed from the same device and reprinted only once. The On Demand encryption technology works best on the default Safari browser although other browsers may accommodate it.