AI Headshot Apk

AI Headshot Apk — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Distribution management system

A distribution management system (DMS) is a collection of applications designed to monitor and control the electric power distribution networks efficiently and reliably. It acts as a decision support system to assist the control room and field operating personnel with the monitoring and control of the electric distribution system. Improving the reliability and quality of service in terms of reducing power outages, minimizing outage time, maintaining acceptable frequency and voltage levels are the key deliverables of a DMS. Given the complexity of distribution grids, such systems may involve communication and coordination across multiple components. For example, the control of active loads may require a complex chain of communication through different components as described in US patent 11747849B2 In recent years, utilization of electrical energy increased exponentially and customer requirement and quality definitions of power were changed enormously. As electric energy became an essential part of daily life, its optimal usage and reliability became important. Real-time network view and dynamic decisions have become instrumental for optimizing resources and managing demands, leading to the need for distribution management systems in large-scale electrical networks. == Overview == Most distribution utilities have been comprehensively using IT solutions through their Outage Management System (OMS) that makes use of other systems like Customer Information System (CIS), Geographical Information System (GIS) and Interactive Voice Response System (IVRS). An outage management system has a network component/connectivity model of the distribution system. By combining the locations of outage calls from customers with knowledge of the locations of the protection devices (such as circuit breakers) on the network, a rule engine is used to predict the locations of outages. Based on this, restoration activities are charted out and the crew is dispatched for the same. In parallel with this, distribution utilities began to roll out Supervisory Control and Data Acquisition (SCADA) systems, initially only at their higher voltage substations. Over time, use of SCADA has progressively extended downwards to sites at lower voltage levels. DMSs access real-time data and provide all information on a single console at the control centre in an integrated manner. Their development varied across different geographic territories. In the US, for example, DMSs typically grew by taking Outage Management Systems to the next level, automating the complete sequences and providing an end to end, integrated view of the entire distribution spectrum. In the UK, by contrast, the much denser and more meshed network topologies, combined with stronger Health & Safety regulation, had led to early centralisation of high-voltage switching operations, initially using paper records and schematic diagrams printed onto large wallboards which were 'dressed' with magnetic symbols to show the current running states. There, DMSs grew initially from SCADA systems as these were expanded to allow these centralised control and safety management procedures to be managed electronically. These DMSs required even more detailed component/connectivity models and schematics than those needed by early OMSs as every possible isolation and earthing point on the networks had to be included. In territories such as the UK, therefore, the network component/connectivity models were usually developed in the DMS first, whereas in the USA these were generally built in the GIS. The typical data flow in a DMS has the SCADA system, the Information Storage & Retrieval (ISR) system, Communication (COM) Servers, Front-End Processors (FEPs) & Field Remote Terminal Units (FRTUs). == Why DMS? == Reduce the duration of outages Improve the speed and accuracy of outage predictions. Reduce crew patrol and drive times through improved outage locating. Improve the operational efficiency Determine the crew resources necessary to achieve restoration objectives. Effectively utilize resources between operating regions. Determine when best to schedule mutual aid crews. Increased customer satisfaction A DMS incorporates IVR and other mobile technologies, through which there is an improved outage communications for customer calls. Provide customers with more accurate estimated restoration times. Improve service reliability by tracking all customers affected by an outage, determining electrical configurations of every device on every feeder, and compiling details about each restoration process. == DMS Functions == In order to support proper decision making and O&M activities, DMS solutions should support the following functions: Network visualization & support tools Applications for Analytical & Remedial Action Utility Planning Tools System Protection Schemes The various sub functions of the same, carried out by the DMS are listed below:- === Network Connectivity Analysis (NCA) === Distribution network usually covers over a large area and catering power to different customers at different voltage levels. So locating required sources and loads on a larger GIS/Operator interface is often very difficult. Panning & zooming provided with normal SCADA system GUI does not cover the exact operational requirement. Network connectivity analysis is an operator specific functionality which helps the operator to identify or locate the preferred network or component very easily. NCA does the required analyses and provides display of the feed point of various network loads. Based on the status of all the switching devices such as circuit breaker (CB), Ring Main Unit (RMU) and/or isolators that affect the topology of the network modeled, the prevailing network topology is determined. The NCA further assists the operator to know operating state of the distribution network indicating radial mode, loops and parallels in the network. === Switching Schedule & Safety Management === In territories such as the UK a core function of a DMS has always been to support safe switching and work on the networks. Control engineers prepare switching schedules to isolate and make safe a section of network before work is carried out, and the DMS validates these schedules using its network model. Switching schedules can combine telecontrolled and manual (on-site) switching operations. When the required section has been made safe, the DMS allows a Permit To Work (PTW) document to be issued. After its cancellation when the work has been finished, the switching schedule then facilitates restoration of the normal running arrangements. Switching components can also be tagged to reflect any Operational Restrictions that are in force. The network component/connectivity model, and associated diagrams, must always be kept absolutely up to date. The switching schedule facility therefore also allows 'patches' to the network model to be applied to the live version at the appropriate stage(s) of the jobs. The term 'patch' is derived from the method previously used to maintain the wallboard diagrams. === State Estimation (SE) === The state estimator is an integral part of the overall monitoring and control systems for transmission networks. It is mainly aimed at providing a reliable estimate of the system voltages. This information from the state estimator flows to control centers and database servers across the network. The variables of interest are indicative of parameters like margins to operating limits, health of equipment and required operator action. State estimators allow the calculation of these variables of interest with high confidence despite the facts that the measurements may be corrupted by noise, or could be missing or inaccurate. Even though we may not be able to directly observe the state, it can be inferred from a scan of measurements which are assumed to be synchronized. The algorithms need to allow for the fact that presence of noise might skew the measurements. In a typical power system, the State is quasi-static. The time constants are sufficiently fast so that system dynamics decay away quickly (with respect to measurement frequency). The system appears to be progressing through a sequence of static states that are driven by various parameters like changes in load profile. The inputs of the state estimator can be given to various applications like Load Flow Analysis, Contingency Analysis, and other applications. === Load Flow Applications (LFA) === Load flow study is an important tool involving numerical analysis applied to a power system. The load flow study usually uses simplified notations like a single-line diagram and focuses on various forms of AC power rather than voltage and current. It analyzes the power systems in normal steady-state operation. The goal of a power flow study is to obtain complete voltage angle and magnitude information for each bus in a power system for specified load and generator real power and voltage conditions. Once this
Read more →
Format-preserving encryption

In cryptography, format-preserving encryption (FPE), refers to encrypting in such a way that the output (the ciphertext) is in the same format as the input (the plaintext). The meaning of "format" varies. Typically only finite sets of characters are used; numeric, alphabetic or alphanumeric. For example: Encrypting a 16-digit credit card number so that the ciphertext is another 16-digit number. Encrypting an English word so that the ciphertext is another English word. Encrypting an n-bit number so that the ciphertext is another n-bit number (this is the definition of an n-bit block cipher). For such finite domains, and for the purposes of the discussion below, the cipher is equivalent to a permutation of N integers {0, ... , N−1} where N is the size of the domain. == Motivation == === Restricted field lengths or formats === One motivation for using FPE comes from the problems associated with integrating encryption into existing applications, with well-defined data models. A typical example would be a credit card number, such as 1234567812345670 (16 bytes long, digits only). Adding encryption to such applications might be challenging if data models are to be changed, as it usually involves changing field length limits or data types. For example, output from a typical block cipher would turn credit card number into a hexadecimal (e.g.0x96a45cbcf9c2a9425cde9e274948cb67, 34 bytes, hexadecimal digits) or Base64 value (e.g. lqRcvPnCqUJc3p4nSUjLZw==, 24 bytes, alphanumeric and special characters), which will break any existing applications expecting the credit card number to be a 16-digit number. Apart from simple formatting problems, using AES-128-CBC, this credit card number might get encrypted to the hexadecimal value 0xde015724b081ea7003de4593d792fd8b695b39e095c98f3a220ff43522a2df02. In addition to the problems caused by creating invalid characters and increasing the size of the data, data encrypted using the CBC mode of an encryption algorithm also changes its value when it is decrypted and encrypted again. This happens because the random seed value that is used to initialize the encryption algorithm and is included as part of the encrypted value is different for each encryption operation. Because of this, it is impossible to use data that has been encrypted with the CBC mode as a unique key to identify a row in a database. FPE attempts to simplify the transition process by preserving the formatting and length of the original data, allowing a drop-in replacement of plaintext values with their ciphertexts in legacy applications. == Comparison to truly random permutations == Although a truly random permutation is the ideal FPE cipher, for large domains it is infeasible to pre-generate and remember a truly random permutation. So the problem of FPE is to generate a pseudorandom permutation from a secret key, in such a way that the computation time for a single value is small (ideally constant, but most importantly smaller than O(N)). == Comparison to block ciphers == An n-bit block cipher technically is a FPE on the set {0, ..., 2n-1}. If an FPE is needed on one of these standard sized sets (for example, n = 64 for DES and n = 128 for AES) a block cipher of the right size can be used. However, in typical usage, a block cipher is used in a mode of operation that allows it to encrypt arbitrarily long messages, and with an initialization vector as discussed above. In this mode, a block cipher is not an FPE. == Definition of security == In cryptographic literature (see most of the references below), the measure of a "good" FPE is whether an attacker can distinguish the FPE from a truly random permutation. Various types of attackers are postulated, depending on whether they have access to oracles or known ciphertext/plaintext pairs. == Algorithms == In most of the approaches listed here, a well-understood block cipher (such as AES) is used as a primitive to take the place of an ideal random function. This has the advantage that incorporation of a secret key into the algorithm is easy. Where AES is mentioned in the following discussion, any other good block cipher would work as well. === The FPE constructions of Black and Rogaway === Implementing FPE with security provably related to that of the underlying block cipher was first undertaken in a paper by cryptographers John Black and Phillip Rogaway, which described three ways to do this. They proved that each of these techniques is as secure as the block cipher that is used to construct it. This means that if the AES algorithm is used to create an FPE algorithm, then the resulting FPE algorithm is as secure as AES because an adversary capable of defeating the FPE algorithm can also defeat the AES algorithm. Therefore, if AES is secure, then the FPE algorithms constructed from it are also secure. In all of the following, E denotes the AES encryption operation that is used to construct an FPE algorithm and F denotes the FPE encryption operation. ==== FPE from a prefix cipher ==== One simple way to create an FPE algorithm on {0, ..., N-1} is to assign a pseudorandom weight to each integer, then sort by weight. The weights are defined by applying an existing block cipher to each integer. Black and Rogaway call this technique a "prefix cipher" and showed it was provably as good as the block cipher used. Thus, to create an FPE on the domain {0,1,2,3}, given a key K apply AES(K) to each integer, giving, for example, weight(0) = 0x56c644080098fc5570f2b329323dbf62 weight(1) = 0x08ee98c0d05e3dad3eb3d6236f23e7b7 weight(2) = 0x47d2e1bf72264fa01fb274465e56ba20 weight(3) = 0x077de40941c93774857961a8a772650d Sorting [0,1,2,3] by weight gives [3,1,2,0], so the cipher is F(0) = 3 F(1) = 1 F(2) = 2 F(3) = 0 This method is only useful for small values of N. For larger values, the size of the lookup table and the required number of encryptions to initialize the table gets too big to be practical. ==== FPE from cycle walking ==== If there is a set M of allowed values within the domain of a pseudorandom permutation P (for example P can be a block cipher like AES), an FPE algorithm can be created from the block cipher by repeatedly applying the block cipher until the result is one of the allowed values (within M). CycleWalkingFPE(x) { if P(x) is an element of M then return P(x) else return CycleWalkingFPE(P(x)) } The recursion is guaranteed to terminate. (Because P is one-to-one and the domain is finite, repeated application of P forms a cycle, so starting with a point in M the cycle will eventually terminate in M.) This has the advantage that the elements of M do not have to be mapped to a consecutive sequence {0,...,N-1} of integers. It has the disadvantage, when M is much smaller than P's domain, that too many iterations might be required for each operation. If P is a block cipher of a fixed size, such as AES, this is a severe restriction on the sizes of M for which this method is efficient. For example, an application may want to encrypt 100-bit values with AES in a way that creates another 100-bit value. With this technique, AES-128-ECB encryption can be applied until it reaches a value which has all of its 28 highest bits set to 0, which will take an average of 228 iterations to happen. ==== FPE from a Feistel network ==== It is also possible to make a FPE algorithm using a Feistel network. A Feistel network needs a source of pseudo-random values for the sub-keys for each round, and the output of the AES algorithm can be used as these pseudo-random values. When this is done, the resulting Feistel construction is good if enough rounds are used. One way to implement an FPE algorithm using AES and a Feistel network is to use as many bits of AES output as are needed to equal the length of the left or right halves of the Feistel network. If a 24-bit value is needed as a sub-key, for example, it is possible to use the lowest 24 bits of the output of AES for this value. This may not result in the output of the Feistel network preserving the format of the input, but it is possible to iterate the Feistel network in the same way that the cycle-walking technique does to ensure that format can be preserved. Because it is possible to adjust the size of the inputs to a Feistel network, it is possible to make it very likely that this iteration ends very quickly on average. In the case of credit card numbers, for example, there are 1015 possible 16-digit credit card numbers (accounting for the redundant check digit), and because the 1015 ≈ 249.8, using a 50-bit wide Feistel network along with cycle walking will create an FPE algorithm that encrypts fairly quickly on average. === The Thorp shuffle === A Thorp shuffle is like an idealized card-shuffle, or equivalently a maximally-unbalanced Feistel cipher where one side is a single bit. It is easier to prove security for unbalanced Feistel ciphers than for balanced ones. === VIL mode === For domain sizes that are a power of two, and an existing block cipher with a smaller bl
Read more →
Social media use in African politics

Since the Egyptian Revolution in 2011 and the Tunisian Revolution, social media, especially Facebook, Twitter, and YouTube, began to gain traction as a political tool in Africa. Various political actors have used social media to pursue a wide range of political objectives. State actors can use social media to encourage political discourse, campaign, or implement censorship and surveillance. Non-state actors, such as civil society organizations and opposition movements, can use social media to address political concerns and to organize widespread uprisings, such as the 2014 Burkinabé uprising. Meanwhile, extremist organizations can use social media to further their propaganda and recruitment. However, social media has been criticized for its limited accessibility and for facilitating the spread of misinformation, causing some skepticism about its effectiveness. Due to low entry barriers and user-generated content, social media provides a platform where people from different social classes can engage and interact with one another. Under traditional media, the public had limited opportunities to voice their political opinions. Social media enables people to both create and consume content. The public has become increasingly comfortable and confident in expressing political opinions online, often away from government scrutiny. Scholars argue that social media use has democratizing effects in African countries. == State actors == === Promoting political discourse === Through social media, the government and its citizens can discuss policy ideas, policy implementation, and political actions. Regardless of geographical location and distance, people are able to voice their opinions to the government. Social media includes citizens who were previously not able to express their discontent or share their ideas to the government. As state actors keep the public informed, social media can increase civic engagement. With more civic engagement, policies can be discussed without politicization. Before the commonplace use of social media, African countries faced weak feedback mechanisms that effectively excluded the average African citizen from policy discourse. In South Africa, the government uses social media to connect with constituencies. The South African president runs an official Twitter, Facebook, YouTube, and Flickr accounts to engage with the public. === Campaigning === Political parties also use social media for political campaigns during election periods. In South Africa, the ANC (African National Congress) and DA (Democratic Alliance) use social media for political purposes. These parties specifically use Facebook as a tool for campaigning and engaging with the public to improve their relationship with citizens. Nigerian President Goodluck Jonathan employed social media to campaign for the presidential election in 2011, which he won. When President Goodluck Jonathan announced his bid for the presidency on social media in 2010, it reached about 217,000 people. As his campaign progressed, President Goodluck Jonathan was able to increase his followers to half a million by early 2011. === Censorship & Surveillance === While state actors can use social media to encourage their party or discourse, social media can be used to censor and surveil citizens. For example, the ANC and DA use Facebook to monitor South Africans. The government is able to track down people who have spoken against the government and translate this information into physical action to stop any possibility of a revolution. Social media platforms can be shut down to manipulate the flow of information. In Chad, citizens cannot access information through online platforms. This censorship blocked "Facebook, Twitter, WhatsApp and Viber". In the Democratic Republic of Congo, the government shut down the internet before contested elections. In Zimbabwe, the government shut down the internet to hide civilian protests against fuel price increases. == Non-state actors == === Civil society organizations (CSOs) === Civil society organizations have also used social media networks in an effort to recruit supporters and communicate with the public. CSOs can use social media to mobilize people to support their cause, such as the Ghanaian Committee for Joint Action (CJA). In 2005 and 2006, the CJA gathered support to protest against the 50% fuel price increase. CSOs can play the role of a counterforce against state actors and state propaganda during times of crises, such as protests and military clashes. In some cases, CSOs release their own videos and photos on social media which challenges traditional forms of media. CSOs have also served to monitor elections to reduce corruption and violence during election day. For instance, the Zambian Bantu Watch started the #bantuwatch social media campaign to monitor the 2011 presidential election. Zambians used Facebook and Twitter to report polling station results to mitigate election fraud and election violence. In South Africa, CSOs created 'amandla.mobi' to campaign for public policies by creating petitions. Through 'amandla.mobi', CSOs are able to circulate petitions on social media to collect signatures. South African CSOs reported how social media helped their organizations to gain support and share ideas. However, CSOs struggle to attract media attention and often have to pay for media coverage. === Opposition forces against the government === Social media is also used by the public or opposition forces against the government. Through horizontal social media, organizing can lead to street protests and revolutions, some of which are successful. For instance, during the Egyptian revolution of 2011, "The Day of the Revolution Against Torture, Poverty, Corruption, and Unemployment" and "We Are All Khaled Said" gathered support against President Hosni Mubarak. In particular, "We Are All Khaled Said" had Egyptian citizens gather around the death of Khaled Said who was brutally tortured and killed by the Egyptian government because Said wanted to uncover government corruption. As unrest erupted into public demonstrations, President Hosni Mubarak was forced to resign. Witnessing the success of social media during the Egyptian revolution, the Tunisian Revolution, or the Jasmine Revolution, mobilized through Facebook and Twitter. Likewise, in South Africa, Malawi, and Mozambique, these countries have used social media as "new protest drums." Due to social media's low entry barrier, opposition forces against the government can facilitate political discourse that can lead to accountability. Whistleblowers and opposition forces are able to expose corruption through social media, where they face less repression while reaching a larger audience. For example, the youth of Zimbabwe and South Africa use Facebook to discuss politics without judgment. Specifically, in Zimbabwe, political youth used Facebook to avoid state surveillance. Social media is used as a supplemental tool for activism. In 2015, South African student activists started the hashtag #RhodesMustFall to push the issue of colonialism and racism at the forefront of the public. === Extremist organizations === Social media is easily accessible and created by user-based content. Therefore, marginalized groups are able to use social media to spread extremist ideas. For instance, Boko Haram created the Media Office of West Africa Province and perpetuated propaganda through Twitter and YouTube. Boko Haram's online propaganda campaign targets and persuades young dissuaded Nigerians to join their cause. It is important to note that social media has also been used against Boko Haram. In April 2014, Boko Haram kidnapped 276 schoolgirls and an international campaign fought for their return through #BringBackOurGirls. Another extremist group, Al-Shabaab, has created an online presence through Twitter and YouTube. Through these social media networks, Al-Shabaab recruits new members to their extremist group through their propaganda which emphasizes the group's successes. Albeit their efforts, Al-Shabaab has not been very successful in coordinating their members but they are successful in financing their group. Furthermore, the Islamic State of Iraq and the Levant (ISIL) use social media to target and recruit individuals to their cause. ISIL's social media usage is more diverse compared to Boko Haram and Al-Shabaab; ISIL uses "Facebook, Twitter, YouTube, WhatsApp, Telegram, JustPaste.it, Kik and Ask.fm." Since ISIL's Twitter accounts kept getting shut down, ISIL uses Telegram and WhatsApp chat rooms to privately conduct meetings. Due to the spread of extremist ideology, Zhuravskaya et al. acknowledge social media's potential to be misused. == Challenges == Although social media can be used as a political tool, it faces challenges in Africa. Due to low literacy rates in Africa, social media networks exclude many of the population members. In addition, lack of access to electricity and the internet can fur
Read more →
Social media and suicide

Since the rise of social media, there have been numerous cases of individuals being influenced towards committing suicide or self-harm through their use of social media, and even of individuals arranging to broadcast suicide attempts, some successful, on social media. Researchers have studied social media and suicide to determine what, if any, risks social media poses in terms of suicide, and to identify methods of mitigating such risks, if they exist. The search for a correlation has not yet uncovered a clear answer. == Background == Suicide is one of the leading causes of death worldwide, and as of 2020, the second leading cause of death in the United States for those aged 15–34. According to the Center for Disease Control and Prevention, suicide was the third leading cause of death among adolescents in the US, from 1999 to 2006. In 2020, people in the US had a suicide rate of 13.5 per 100,000. Suicide was a leading cause of death in the United States accounting for 48,183 deaths in 2021. Suicide rates increased by 30 per cent from 2000 to 2018 and declined in 2019 and 2020. Suicide remains a significant public health issue worldwide, despite prevention efforts and treatments. Suicide has been identified not only as an individual phenomenon but also as being influenced by social and environmental factors. There is growing evidence that online activity has influenced suicide-related behavior. The use of social media throughout the 21st century has grown exponentially. For this reason, there are a variety of sources that are accessible to the public in various forms, especially social media sites such as Facebook, Instagram, Twitter, YouTube, Snapchat, TikTok and many more. Although these platforms were intended to allow people to connect virtually, these platforms can lead to cyber-bullying, insecurity, and emotional distress, and sometimes may influence a person to attempt suicide. Bullying, whether on social media or elsewhere, physical or not, significantly increases victims' risk of suicidal behavior. Since social media was introduced some people have taken their lives as a result of cyberbullying. Furthermore, suicide rates among teenagers have increased from 2010 to 2022 as social media has become something that people interact with more throughout their day-to-day lives. Media algorithms tend to popularize videos and posts to inform the country of the rising trouble, which may create a popular appeal to the young and immature minds of teenagers. This is why, social media could provide higher risks with the promotion of different kinds of pro-suicidal sites, message boards, chat rooms, and forums. Moreover, the Internet not only reports suicide incidents but documents suicide methods (for example, suicide pacts, an agreement between two or more people to kill themselves at a particular time and often by the same lethal means). Therefore, the role the Internet plays, particularly social media, in suicide-related behavior is a topic of growing interest. == Cyberbullying == There is substantial evidence that the Internet and social media can influence suicide-related behavior. Such evidence includes an increase in exposure to graphic content. A research study conducted by Sameer Hinduja and Justin Patchin found a correlation between cyberbullying and suicide. According to their findings, cyber-bullying increases suicidal thoughts by 14.5 percent and suicide attempts by 8.7 percent. Particularly alarming is the fact that children and young people under 25 who are victims of cyberbullying are more than twice as likely to self-harm and engage in suicidal behavior. Overall, teen suicide rates have increased within the past decade.This presents a significant public health concern, with over 40,000 suicides in the United States and nearly one million worldwide annually. Adolescents involved in cyberbullying often downplay its seriousness by calling it a joke or blaming the victim. These moral disengagement strategies can normalize harmful behavior and reduce feelings of guilt. This normalization may increase emotional distress and contribute to risks like depression and suicidal thoughts. Recent data from the Centers for Disease Control and Prevention reveals that 14.9 per cent of teenagers have experienced online bullying, while 13.6 per cent of teenagers have seriously attempted suicide. Both of these incidents are in increasing numbers in the United States. Furthermore, in numerous recent incidents, cyber-bullying led the victim to commit suicide; this phenomenon is now known as cyberbullicide. Many parents and children are unaware of the dangers and potential legal consequences of cyberbullying. As a response, anti-bullying regulations implemented by schools aim to prevent any form of bullying, including through technology, and protect students from online harassment. While some states have enacted laws against cyberbullying, there are currently no federal regulations addressing this issue. == Social media's influence on suicide == The media may portray suicidal behavior or language which can potentially influence people to act on these suicidal ideation. This may include news reports of actual suicides that have occurred or television shows and films that reenact suicides. Some organizations have proposed guidelines about how the media should report suicide. There is evidence that compliance with the guidelines varies. Some research showed that it is unclear whether the guidelines have successfully reduced the number of suicides. On the contrary, other research studies stated that the guidelines have worked in some cases. == Impact of pro-suicidal sites, message boards, chat rooms and forums == Social media platforms have transformed traditional methods of communication by allowing instantaneous and interactive sharing of information created and controlled by individuals, groups, organizations, and governments. As of the third quarter of 2022, Facebook had 266 million monthly active users, between Canada and the US. An immense quantity of information on the topic of suicide is available on the Internet and via social media. The information available on social media on the topic of suicide can influence suicidal behavior, both negatively and positively. The social cognitive theory plays a vital role in suicide attempts influenced through social media. This theory is demonstrated when one is influenced by what they see through various processes that form into modeled behaviors. This can be shown when people post their suicide attempts online or promote suicidal behavior in general. Contributors to these social media platforms may also exert peer pressure and encourage others to take their own lives, idolize those who have killed themselves, and facilitate suicide pacts. These pro-suicidal sites reported the following. For example, on a Japanese message board in 2008, it was shared that people can kill themselves using hydrogen sulfide gas. Shortly afterwards, 220 people attempted suicide in this way, and 208 were successful. Biddle et al. conducted a systematic Web search of 12 suicide-associated terms (e.g., suicide, suicide methods, how to kill yourself, and best suicide methods) to analyze the search results, and found that pro-suicide sites and chat rooms that discussed general issues associated with suicide most often occurred within the first few hits of a search. In another study, 373 suicide-related websites were found using Internet search engines and examined. Among them, 31% were suicide-neutral, 29% were anti-suicide, and 11% were pro-suicide. Together, these studies have shown that obtaining pro-suicide information on the Internet, including detailed information on suicide methods, is very easy. While social media has been prevalent in young adult suicide, some young adults find comfort and solace through these platforms. Young adults are making connections with people in like situations that are helping them feel less lonely. Although the public opinion is that message boards are harmful, the following studies show how they point to suicide prevention and have positive influences. A study using content analysis analyzed all of the postings on the AOL Suicide Bulletin Board over 11 months and concluded that most contributions contained positive, empathetic, and supportive postings. Then, a multi-method study was able to demonstrate that the users of such forums experience a great deal of social support and only a small amount of social strain. Lastly, in the survey participants were asked to assess the extent of their suicidal thoughts on a 7-level scale (0, absolutely no suicidal thoughts, to 7, very strong suicidal thoughts) for the time directly before their first forum visit and at the time of the survey. The study found a significant reduction after using the forum. The study however cannot conclude the forum is the only reason for the decrease. Together, these studies show how forums can reduce the number of
Read more →
Vulnerability Discovery Model

A Vulnerability Discovery Model (VDM) uses discovery event data with software reliability models for predicting the same. A thorough presentation of VDM techniques is available in. Numerous model implementations are available in the MCMCBayes open source repository. Several VDM examples include: Alhazmi-Malaiya: Time based model (Alhazmi-Malaiya Logistic (AML) model) Alhazmi-Malaiya: Effort based model Rescorla: Quadratic Model and Exponential Model Anderson: Thermodynamic Model Kim: Weibull Model Linear Model Hump-Shaped Model Independent and Dependent Model Vulnerability Discovery Modeling using Bayesian model averaging Multivariate Vulnerability Discovery Models
Read more →
Data exhaust

Data exhaust (also exhaust data) is the trail of data generated as a by-product of users' online activity, behaviour, and transactions, rather than data they deliberately create or submit. It forms part of a broader category of unconventional data that also includes geospatial, network, and time-series data, and may be useful for predictive analytics. Data exhaust can take the form of cookies, temporary files, log files, clickstream records and stored preferences. Actions such as visiting a web page, following a link, or dwelling on an element may all generate exhaust data that is recorded without the user's active awareness. Unlike primary content — which the user intentionally creates — exhaust data is a passive side effect of interaction. A bank, for example, might treat the amounts and parties involved in a transaction as primary data, while secondary data could include whether the transaction was carried out at a cash machine rather than a branch. == Uses == Data exhaust collected by companies is often information that is not immediately useful in isolation, but can be aggregated and analysed to improve products, personalise content, identify trends, and support quality control. Companies may also store exhaust data for future analysis or sell it to third parties. Shoshana Zuboff has described this practice as a core mechanism of what she terms surveillance capitalism, in which behavioural data generated by users is converted into predictive products. Kosciejew notes that large quantities of often raw data are collected in this way, much of which is never analysed. == Medical exhaust data == Many medical devices — including pacemakers, dialysis machines and surgical cameras — generate exhaust data as a by-product of their operation. The majority of this data is never captured or analysed, and is typically discarded once a procedure ends or a device completes its routine monitoring cycle. The potential use of data generated by implanted devices such as pacemakers raises additional legal and ethical questions around ownership and consent. Using electronic health records for research also creates challenges because of the volume of data involved, creating a need for automated algorithms to process it. == Privacy and regulation == The collection and distribution of data exhaust is not in itself illegal in most jurisdictions, but its use raises questions of privacy and informed consent. Steps commonly taken to address these concerns include data anonymisation, offering users an opt-out from the sale of their data, and publishing explicit privacy policies that disclose what data is collected and how it is used.
Read more →
Harvest now, decrypt later

Harvest now, decrypt later (HNDL) is a surveillance strategy that relies on the acquisition and long-term storage of currently unreadable encrypted data awaiting possible breakthroughs in decryption technology that would render it readable in the future—a hypothetical date referred to as Y2Q (a reference to Y2K), or Q-Day. The most common concern is the prospect of developments in quantum computing which would allow current strong encryption algorithms to be broken at some time in the future, making it possible to decrypt any stored material that had been encrypted using those algorithms. However, the improvement in decryption technology need not be due to a quantum-cryptographic advance; any other form of attack capable of enabling decryption would be sufficient. The existence of this strategy has led to concerns about the need to urgently deploy post-quantum cryptography; even though no practical quantum attacks yet exist, some data stored now may still remain sensitive even decades into the future. As of 2022, the U.S. federal government has proposed a roadmap for organizations to start migrating toward quantum-cryptography-resistant algorithms to mitigate these threats. This new version of Commercial National Security Algorithm Suite uses publicly-available algorithms and is allowed for government use up to the TOP SECRET level. == Terminology and scope == The term “harvest now, decrypt later” encompasses various surveillance or espionage operations in which ciphertext or encrypted communications are collected today with the view that they may one day be decrypted, given sufficient advances in computing power or cryptanalysis. The abbreviation HNDL is sometimes used in technical and policy documents. The “Y2Q” (or “Q-Day”) label draws an analogy to the Y2K date-change issue, emphasising a potential future point at which current cryptography may collapse. The strategy is particularly relevant for data with long confidentiality lifetimes, such as diplomatic communications, personal health records, critical infrastructure logs, or intellectual property. == Mitigation strategies == The primary defense against HNDL attacks is the transition to post-quantum cryptography (PQC), which utilizes algorithms believed to be secure against quantum computer attacks. However, because PQC protects the data payload digitally, rather than the transmission itself, the encrypted data can still be harvested and stored. A complementary approach involves physical layer security (also known as optical layer encryption or photonic shielding). Unlike algorithmic encryption, this method modifies the optical waveform itself—often by burying the signal within optical noise or using spectral phase encoding—to render the transmission unrecordable by standard receivers. By preventing the attacker from capturing a valid signal in the first place, this approach aims to eliminate the "harvest" phase of the threat. Commercial implementations of harvest-proof optical encryption have been developed by firms such as CyberRidge to secure long-haul fiber networks. Field trials have demonstrated 100 Gbps throughput over legacy DWDM networks using this method.
Read more →
Social media measurement

Social media measurement, also called social media controlling, is the management practice of evaluating successful social media communications of brands, companies, or other organizations. Key performance indicators may be measured by extracting information from social media channels, such as blogs, wikis, micro-blogs such as Twitter, social networking sites, or video/photo sharing websites, forums from time to time. It is also used by companies to gauge current trends in the industry. The process first gathers data from different websites and then performs analysis based on different metrics like time spent on the page, click through rate, content share, comments, text analytics to identify positive or negative emotions about the brand. Some other social media metrics include share of voice, owned mentions, and earned mentions. The social media measurement process starts with defining a goal that needs to be achieved and defining the expected outcome of the process. The expected outcome varies per the goal and is usually measured by a variety of metrics. This is followed by defining possible social strategies to be used to achieve the goal. Then the next step is designing strategies to be used and setting up configuration tools that ease the process of collecting the data. In the next step, strategies and tools are deployed in real-time. This step involves conducting Quality Assurance tests of the methods deployed to collect the data. And in the final step, data collected from the system is analyzed and if the need arises, it is refined on the run time to enhance the methodologies used. The last step ensures that the result obtained is more aligned with the goal defined in the first step. == Data Acquisition == Acquiring data from social media is in demand of an exploring the user participation and population with the purpose of retrieving and collecting so many kinds of data(ex: comments, downloads etc.). There are several prevalent techniques to acquire data such as Network traffic analysis, Ad-hoc application and Crawling Network Traffic Analysis - Network traffic analysis is the process of capturing network traffic and observing it closely to determine what is happening in the network. It is primarily done to improve the performance, security and other general management of the network. However concerned about the potential tort of privacy on the Internet, network traffic analysis is always restricted by the government. Furthermore, high-speed links are not adaptable to traffic analysis because of the possible overload problem according to the packet sniffing mechanism Ad-hoc Application - Ad-hoc application is a kind of application that provides services and games to social network users by developing the APIs offered by social network companies (Facebook Developer Platform). The infrastructure of Ad-hoc application allows the user to interact with the interface layer instead of the application servers. The API provides a path for application to access information after the user login. Moreover, the size of the data set collected vary with the popularity of the social media platform i.e. social media platforms having high number of users will have more data than platforms having less user base. Scraping is a process in which the APIs collect online data from social media. The data collected from Scraping is in raw format. However, having access to these types of data is a bit difficult because of its commercial value. Crawling - Crawling is a process in which a web crawler creates indexes of all the words in a web-page, stores them, then follows all the hyperlinks and indexes on that page and again stores them. It is the most popular technique for data acquisition and is also well known for its easy operation based on prevalent Object-Orientated Programming Language (Java or Python etc.). And most important, social network companies (YouTube, Flicker, Facebook, Instagram, etc.) are friendly to crawling techniques by providing public APIs == Applications == === For branding === Monitoring social media allows researchers to find insights into a brand's overall visibility on social media, to measure the impact of campaigns, to identify opportunities for engagement, to assess competitor activity and share of voice, and to detect impending crises. It can also provide valuable information about emerging trends and what consumers and clients think about specific topics, brands or products. This is the work of a cross-section of groups that include market researchers, PR staff, marketing teams, social-engagement, and community staff, agencies and sales teams. Several different providers have developed tools to facilitate the monitoring of a variety of social media channels - from blogging to internet video to internet forums. This allows companies to track what consumers say about their brands and actions. Companies can then react to these conversations and interact with consumers through social media platforms. === In government === Apart from commercial applications, social media monitoring has become a pervasive technique applied by public organizations and governments. Monitoring is a tradition within the public sector, and social-media monitoring provides a real-time approach to detecting and responding to social developments. Governments have come to realize the need for strategies to cope with surprises from the rapid expansion of public issues. Sobkowicz introduced a framework with three blocks of social-media opinion tracking, simulating and forecasting. It includes: real-time detection of emotions, topics and opinions information-flow modelling and agent-based simulation modeling of opinion networks Bekkers introduced the application of social media monitoring in the Netherlands. Public organizations in the Netherlands (such as the Tax Agency and the Education Ministry) have started to use social media monitoring to obtain better insights into the sentiments of target groups. On the one hand, the public sector will be enabled to provide timely and efficient answers to the public by using social media monitoring techniques, but on the other hand, they also have to deal with concerns about ethical issues such as transparency and privacy. == Quantifying social media == Social media management software (SMMS) is an application program or software that facilitates an organization's ability to successfully engage in social media across different communication channels. SMMS is used to monitor inbound and outbound conversations, support customer interaction, audit or document social marketing initiatives and evaluate the usefulness of a social media presence. It can be difficult to measure all social media conversations. Due to privacy settings and other issues, not all social media conversations can be found and reported by monitoring tools. However, whilst social media monitoring cannot give absolute figures, it can be extremely useful for identifying trends and for benchmarking, in addition to the uses mentioned above. These findings can, in turn, influence and shape future business decisions. In order to access social media data (posts, Tweets, and meta-data) and to analyze and monitor social media, many companies use software technologies built for business. These range from in-platform analytics dashboards to dedicated third-party platforms, which offer more advanced capabilities including cross-platform audience intelligence, sentiment analysis, and trend detection at scale. == Location-based == Most social media networks allow users to add a location to their posts (reference all of our feeds). The location can be classified as either 'at-the-location' or 'about-the-location'. "'At-the-location' services can be defined as services where location-based content is created at the geographic location. 'About-the-location' services can be defined as services which are referring to a particular location but the content is not necessarily created in this particular physical place." The added information available from geotagged (link to Geotagging article) posts means that they can be displayed on a map. This means that a location can be used as the start of a social media search rather than a keyword or hashtag. This has major implications for disaster relief, event monitoring, safety and security professionals since a large portion of their job is related to tracking and monitoring specific locations. == Technologies used == Various monitoring platforms use different technologies for social media monitoring and measurement. These technology providers may connect to the API provided by social platforms that are created for 3rd party developers to develop their own applications and services that access data. Facebook's Graph API is one such API that social media monitoring solution products would connect to pull data from. Some social media monitoring and analytics companies use calls to data providers each time an end-user d
Read more →
Containerization (computing)

In software engineering, containerization is operating-system-level virtualization or application-level virtualization over multiple resources so that software applications can run in isolated user spaces called containers in any cloud or non-cloud environment, regardless of type or vendor. The term "container" has different meanings in different contexts, and it is important to ensure that the intended definition aligns with the audience's understanding. == Usage == Each container is basically a fully functional and portable cloud or non-cloud computing environment surrounding the application and keeping it independent of other environments running in parallel. Individually, each container simulates a different software application and runs isolated processes by bundling related configuration files, libraries and dependencies. But, collectively, multiple containers share a common operating system kernel (OS). In recent times, containerization technology has been widely adopted by cloud computing platforms like Amazon Web Services, Microsoft Azure, Google Cloud Platform, and IBM Cloud. Containerization has also been pursued by the U.S. Department of Defense as a way of more rapidly developing and fielding software updates, with first application in its F-22 air superiority fighter. == History == The concept of containerization in computing originated from early operating system–level isolation mechanisms. One of the earliest implementations was the chroot system call introduced in Version 7 Unix in 1979, which changed the apparent root directory for a process and its children, providing a basic form of filesystem isolation. In the early 2000s, more advanced forms of operating system–level virtualization were developed. FreeBSD introduced "jails" in 2000, which extended isolation by restricting processes to a subset of system resources. Around the same time, Solaris introduced "zones" (also known as Solaris Containers), providing similar capabilities with resource management and isolation features. Linux later incorporated comparable functionality through kernel features such as namespaces and control groups (cgroups), which enabled isolation of process IDs, network stacks, filesystems, and resource allocation. These features formed the foundation for Linux Containers (LXC), which provided a userspace interface for managing containers. The widespread adoption of containerization accelerated with the release of Docker in 2013, which introduced a standardized format for packaging applications and their dependencies, along with tooling for image distribution and container management. == Types of containers == OS containers Application containers == Security issues == Because of the shared OS, security threats can affect the whole containerized system. In containerized environments, security scanners generally protect the OS, but not the application containers, which adds unwanted vulnerability. == Container management, orchestration, clustering == Container orchestration or container management is mostly used in the context of application containers. Implementations providing such orchestration include Kubernetes and Docker swarm. == Container cluster management == Container clusters need to be managed. This includes functionality to create a cluster, to upgrade the software or repair it, balance the load between existing instances, scale by starting or stopping instances to adapt to the number of users, to log activities and monitor produced logs or the application itself by querying sensors. Open-source implementations of such software include OKD and Rancher. Quite a number of companies provide container cluster management as a managed service, like Alibaba, Amazon, Google, and Microsoft.
Read more →
Information security

Information security is the practice of protecting information by mitigating information risks. It is part of information risk management. It typically involves preventing or reducing the probability of unauthorized or inappropriate access to data or the unlawful use, disclosure, disruption, deletion, corruption, modification, inspection, recording, or devaluation of information. It also involves actions intended to reduce the adverse impacts of such incidents. Protected information may take any form, e.g., electronic or physical, tangible (e.g., paperwork), or intangible (e.g., knowledge). Information security's primary focus is the balanced protection of data confidentiality, integrity, and availability (known as the CIA triad, unrelated to the US government organization) while maintaining a focus on efficient policy implementation, all without hampering organization productivity. This is largely achieved through a structured risk management process. To standardize this discipline, academics and professionals collaborate to offer guidance, policies, and industry standards on passwords, antivirus software, firewalls, encryption software, legal liability, security awareness and training, and so forth. This standardization may be further driven by a wide variety of laws and regulations that affect how data is accessed, processed, stored, transferred, and destroyed. While paper-based business operations are still prevalent, requiring their own set of information security practices, enterprise digital initiatives are increasingly being emphasized, with information assurance now typically being dealt with by information technology (IT) security specialists. These specialists apply information security to technology (most often some form of computer system). IT security specialists are almost always found in any major enterprise/establishment due to the nature and value of the data within larger businesses. They are responsible for keeping all of the technology within the company secure from malicious attacks that often attempt to acquire critical private information or gain control of the internal systems. There are many specialist roles in Information Security including securing networks and allied infrastructure, securing applications and databases, security testing, information systems auditing, business continuity planning, electronic record discovery, and digital forensics. == Standards == Information security standards are guidelines generally outlined in published materials that aim to protect a user's or an organization's cyber environment from threats. This environment includes the users themselves, hardware such as devices and networks, software such as applications or services, and any information in storage or transit. These standards comprise security concepts, technologies, and guidelines to deal with an adverse event. They may also include assessment criteria and certification for organizations implementing a minimum level of security. These standards are developed by various international and national bodies to prevent or mitigate cyber-attacks, ensure consistency among developers, and establish a minimum standard in industries susceptible to an attack. The ISO/IEC 27000 family, published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), provides information about the guidelines and requirements for an Information Security Management System (ISMS). The Common Criteria (ISO/IEC 15408) provides guidelines on evaluating and certifying the security of a system. The IEC 62443 establishes security standards for automation and control systems. Similarly, the ISO/SAE 21434, ETSI EN 303 645, and EN 18031 provide standards for road vehicles, the Internet of Things, and radio-based systems respectively. The NIST Cybersecurity Framework (NIST CSF) is a set of guidelines developed by the U.S. National Institute of Standards and Technology to help organizations with risk management. NIST also publishes various Federal Information Processing Standards (FIPS) and Special Publications. The United Kingdom has introduced Cyber Essentials, which is a certification scheme to protect organizations against common security threats. The Australian Cyber Security Centre publishes the Essential Eight mitigation strategies. The Payment Card Industry Data Security Standard (PCI DSS) regulates handling of cardholder data in order to reduce credit card fraud. UL has published standards related to specific industries such as UL 2900-2-3 for security and life safety signaling systems and UL-2900-2-1 for healthcare and wellness systems. == Threats == Information security threats come in many different forms. Some of the most common threats today are software attacks, theft of intellectual property, theft of identity, theft of equipment or information, sabotage, and information extortion. Viruses, worms, phishing attacks, and Trojan horses are a few common examples of software attacks. The theft of intellectual property has also been an extensive issue for many businesses. Identity theft is the attempt to act as someone else usually to obtain that person's personal information or to take advantage of their access to vital information through social engineering. Sabotage usually consists of the destruction of an organization's website in an attempt to cause loss of confidence on the part of its customers. Information extortion consists of theft of a company's property or information as an attempt to receive a payment in exchange for returning the information or property back to its owner, as with ransomware. One of the most functional precautions against these attacks is to conduct periodical user awareness. Governments, military, corporations, financial institutions, hospitals, non-profit organizations, and private businesses amass a great deal of confidential information about their employees, customers, products, research, and financial status. Should confidential information about a business's customers or finances or new product line fall into the hands of a competitor or hacker, a business and its customers could suffer widespread, irreparable financial loss, as well as damage to the company's reputation. From a business perspective, information security must be balanced against cost; the Gordon-Loeb Model provides a mathematical economic approach for addressing this concern. For the individual, information security has a significant effect on privacy, which is viewed very differently in various cultures. == History == Since the early days of communication, diplomats and military commanders understood that it was necessary to provide some mechanism to protect the confidentiality of correspondence and to have some means of detecting tampering. Julius Caesar is credited with the invention of the Caesar cipher c. 50 B.C., which was created in order to prevent his secret messages from being read should a message fall into the wrong hands. However, for the most part protection was achieved through the application of procedural handling controls. Sensitive information was marked up to indicate that it should be protected and transported by trusted persons, guarded and stored in a secure environment or strong box. As postal services expanded, governments created official organizations to intercept, decipher, read, and reseal letters (e.g., the U.K.'s Secret Office, founded in 1653). In the mid-nineteenth century more complex classification systems were developed to allow governments to manage their information according to the degree of sensitivity. For example, the British Government codified this, to some extent, with the publication of the Official Secrets Act in 1889. Section 1 of the law concerned espionage and unlawful disclosures of information, while Section 2 dealt with breaches of official trust. A public interest defense was soon added to defend disclosures in the interest of the state. A similar law was passed in India in 1889, The Indian Official Secrets Act, which was associated with the British colonial era and used to crack down on newspapers that opposed the Raj's policies. A newer version was passed in 1923 that extended to all matters of confidential or secret information for governance. By the time of the First World War, multi-tier classification systems were used to communicate information to and from various fronts, which encouraged greater use of code making and breaking sections in diplomatic and military headquarters. Encoding became more sophisticated between the wars as machines were employed to scramble and unscramble information. The establishment of computer security inaugurated the history of information security. The need for such appeared during World War II. The volume of information shared by the Allied countries during the Second World War necessitated formal alignment of classification systems and procedural controls. An arcane range of markings evol
Read more →
Tropical cryptography

In tropical analysis, tropical cryptography refers to the study of a class of cryptographic protocols built upon tropical algebras. In many cases, tropical cryptographic schemes have arisen from adapting classical (non-tropical) schemes to instead rely on tropical algebras. The case for the use of tropical algebras in cryptography rests on at least two key features of tropical mathematics: in the tropical world, there is no classical multiplication (a computationally expensive operation), and the problem of solving systems of tropical polynomial equations has been shown to be NP-hard. == Basic Definitions == The key mathematical object at the heart of tropical cryptography is the tropical semiring ( R ∪ { ∞ } , ⊕ , ⊗ ) {\displaystyle (\mathbb {R} \cup \{\infty \},\oplus ,\otimes )} (also known as the min-plus algebra), or a generalization thereof. The operations are defined as follows for x , y ∈ R ∪ { ∞ } {\displaystyle x,y\in \mathbb {R} \cup \{\infty \}} : x ⊕ y = min { x , y } {\displaystyle x\oplus y=\min\{x,y\}} x ⊗ y = x + y {\displaystyle x\otimes y=x+y} It is easily verified that with ∞ {\displaystyle \infty } as the additive identity, these binary operations on R ∪ { ∞ } {\displaystyle \mathbb {R} \cup \{\infty \}} form a semiring.
Read more →
Plaintext

In cryptography, plaintext usually means unencrypted information pending input into cryptographic algorithms, usually encryption algorithms. This usually refers to data that is transmitted or stored unencrypted. == Overview == With the advent of computing, the term plaintext expanded beyond human-readable documents to mean any data, including binary files, in a form that can be viewed or used without requiring a key or other decryption device. Information—a message, document, file, etc.—if to be communicated or stored in an unencrypted form is referred to as plaintext. Plaintext is used as input to an encryption algorithm; the output is usually termed ciphertext, particularly when the algorithm is a cipher. Codetext is less often used, and almost always only when the algorithm involved is actually a code. Some systems use multiple layers of encryption, with the output of one encryption algorithm becoming "plaintext" input for the next. == Secure handling == Insecure handling of plaintext can introduce weaknesses into a cryptosystem by letting an attacker bypass the cryptography altogether. Plaintext is vulnerable in use and in storage, whether in electronic or paper format. Physical security means the securing of information and its storage media from physical, attack—for instance by someone entering a building to access papers, storage media, or computers. Discarded material, if not disposed of securely, may be a security risk. Even shredded documents and erased magnetic media might be reconstructed with sufficient effort. If plaintext is stored in a computer file, the storage media, the computer and its components, and all backups must be secure. Sensitive data is sometimes processed on computers whose mass storage is removable, in which case physical security of the removed disk is vital. In the case of securing a computer, useful (as opposed to handwaving) security must be physical (e.g., against burglary, brazen removal under cover of supposed repair, installation of covert monitoring devices, etc.), as well as virtual (e.g., operating system modification, illicit network access, Trojan programs). Wide availability of keydrives, which can plug into most modern computers and store large quantities of data, poses another severe security headache. A spy (perhaps posing as a cleaning person) could easily conceal one, and even swallow it if necessary. Discarded computers, disk drives and media are also a potential source of plaintexts. Most operating systems do not actually erase anything— they simply mark the disk space occupied by a deleted file as 'available for use', and remove its entry from the file system directory. The information in a file deleted in this way remains fully present until overwritten at some later time when the operating system reuses the disk space. With even low-end computers commonly sold with many gigabytes of disk space and rising monthly, this 'later time' may be months later, or never. Even overwriting the portion of a disk surface occupied by a deleted file is insufficient in many cases. Peter Gutmann of the University of Auckland wrote a celebrated 1996 paper on the recovery of overwritten information from magnetic disks; areal storage densities have gotten much higher since then, so this sort of recovery is likely to be more difficult than it was when Gutmann wrote. Modern hard drives automatically remap failing sectors, moving data to good sectors. This process makes information on those failing, excluded sectors invisible to the file system and normal applications. Special software, however, can still extract information from them. Some government agencies (e.g., US NSA) require that personnel physically pulverize discarded disk drives and, in some cases, treat them with chemical corrosives. This practice is not widespread outside government, however. Garfinkel and Shelat (2003) analyzed 158 second-hand hard drives they acquired at garage sales and the like, and found that less than 10% had been sufficiently sanitized. The others contained a wide variety of readable personal and confidential information. See data remanence. Physical loss is a serious problem. The US State Department, Department of Defense, and the British Secret Service have all had laptops with secret information, including in plaintext, lost or stolen. Appropriate disk encryption techniques can safeguard data on misappropriated computers or media. On occasion, even when data on host systems is encrypted, media that personnel use to transfer data between systems is plaintext because of poorly designed data policy. For example, in October 2007, HM Revenue and Customs lost CDs that contained the unencrypted records of 25 million child benefit recipients in the United Kingdom. Modern cryptographic systems resist known plaintext or even chosen plaintext attacks, and so may not be entirely compromised when plaintext is lost or stolen. Older systems resisted the effects of plaintext data loss on security with less effective techniques—such as padding and Russian copulation to obscure information in plaintext that could be easily guessed.
Read more →
Lucy–Hook coaddition method

The Lucy–Hook coaddition method is an image processing technique for combining sub-stepped astronomical image data onto a finer grid. The method allows the option of resolution and contrast enhancement or the choice of a conservative, re-convolved, output. Tests with very deep Hubble Space Telescope Wide Field and Planetary Camera 2 (WFPC2) imaging data of excellent quality show that these methods can be very effective and allow fine-scale features to be studied better than on the unprocessed images. The Lucy–Hook coaddition method is an extension of the standard Richardson–Lucy deconvolution iterative restoration method. For many purposes it may be more convenient to combine dithered datasets using the Drizzle method.
Read more →
Rassd News Network

Rassd News Network, also known by its initials of RNN (Arabic:شبكة رصد الاخبارية), is an alternative media network based in Cairo, Egypt. RNN was launched as a Facebook-based news source launched on January 25, 2011. It quickly advanced to become a primary contributor of Egyptian revolution-related news that year. Applying the motto "From the people to the people," the citizen journalists who created RNN have since added a Twitter feed and launched an independent website dedicated to short news stories favored by an online audience. RNN is an organized citizen news network with four working committees; one for editing the news, another to support the correspondents covering Egypt, a third for managing the multimedia feeds and a fourth for staff functions such as development, training and public relations. RNN's Arabic name, Rassd, is an acronym that stands for Rakeb (observe), Sawwer (record) and Dawwen (blog). RNN created a Ustream channel on January 27, 2011, and a YouTube account a month later. The success of RNN and its new social media model is evidenced in its recent local network expansion into Libya, Morocco, Syria, Jerusalem and Turkey. Even so, one media scholar in the US (commenting in 2011) called the accuracy of RNN's reporting "fairly mediocre". RNN has endured closures of their Facebook profile and YouTube account as part of the attacks from private media, attempting to thwart their work and influence their content. == Use of RNN's news by international media == RNN has been a global source of Egyptian revolution-related news since its launch. During the early days of the citizen uprisings across the Middle East, major networks such as BBC, Reuters, Al Jazeera and Al Arabiya used some of Rassd's news and photos, and followed the network on Twitter. Three days after the online portal went live it was streaming video to MSNBC through its Facebook page. Then on February 5, 2011, Louisville's NBC-affiliate cited RNN, Cairo when it reported that President Hosni Mubarak had stepped down as head of Egypt's ruling party.
Read more →
Cryptographic Module Testing Laboratory

Cryptographic Module Testing Laboratory (CMTL) is an information technology (IT) computer security testing laboratory that is accredited to conduct cryptographic module evaluations for conformance to the FIPS 140-2 U.S. Government standard. The National Institute of Standards and Technology (NIST) National Voluntary Laboratory Accreditation Program (NVLAP) accredits CMTLs to meet Cryptographic Module Validation Program (CMVP) standards and procedures. This has been replaced by FIPS 140-2 and the Cryptographic Module Validation Program (CMVP). == CMTL requirements == These laboratories must meet the following requirements: NIST Handbook 150, NVLAP Procedures and General Requirements NIST Handbook 150-17 Information Technology Security Testing - Cryptographic Module Testing NVLAP Specific Operations Checklist for Cryptographic Module Testing == FIPS 140-2 in relation to the Common Criteria == A CMTL can also be a Common Criteria (CC) Testing Laboratory (CCTL). The CC and FIPS 140-2 are different in the abstractness and focus of evaluation. FIPS 140-2 testing is against a defined cryptographic module and provides a suite of conformance tests to four FIPS 140 security levels. FIPS 140-2 describes the requirements for cryptographic modules and includes such areas as physical security, key management, self tests, roles and services, etc. The standard was initially developed in 1994 - prior to the development of the CC. The CC is an evaluation against a Protection Profile (PP), or security target (ST). Typically, a PP covers a broad range of products. A CC evaluation does not supersede or replace a validation to either FIPS 140-1, FIPS140-2 or FIPS 140-3. The four security levels in FIPS 140-1 and FIPS 140-2 do not map directly to specific CC EALs or to CC functional requirements. A CC certificate cannot be a substitute for a FIPS 140-1 or FIPS 140-2 certificate. If the operational environment is a modifiable operational environment, the operating system requirements of the Common Criteria are applicable at FIPS Security Levels 2 and above. FIPS 140-1 required evaluated operating systems that referenced the Trusted Computer System Evaluation Criteria (TCSEC) classes C2, B1 and B2. However, TCSEC is no longer in use and has been replaced by the Common Criteria. Consequently, FIPS 140-2 now references the Common Criteria. FIPS 140-2 or FIPS 140-3 validation efforts can be in some parts reused in Common Criteria evaluations, specifically in areas related to entropy source and cryptographic algorithms.
Read more →