AI Email Management

AI Email Management — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Semantic neural network

Semantic neural network (SNN) is based on John von Neumann's neural network [von Neumann, 1966] and Nikolai Amosov M-Network. There are limitations to a link topology for the von Neumann’s network but SNN accept a case without these limitations. Only logical values can be processed, but SNN accept that fuzzy values can be processed too. All neurons into the von Neumann network are synchronized by tacts. For further use of self-synchronizing circuit technique SNN accepts neurons can be self-running or synchronized. In contrast to the von Neumann network there are no limitations for topology of neurons for semantic networks. It leads to the impossibility of relative addressing of neurons as it was done by von Neumann. In this case an absolute readdressing should be used. Every neuron should have a unique identifier that would provide a direct access to another neuron. Of course, neurons interacting by axons-dendrites should have each other's identifiers. An absolute readdressing can be modulated by using neuron specificity as it was realized for biological neural networks. There’s no description for self-reflectiveness and self-modification abilities into the initial description of semantic networks [Dudar Z.V., Shuklin D.E., 2000]. But in [Shuklin D.E. 2004] a conclusion had been drawn about the necessity of introspection and self-modification abilities in the system. For maintenance of these abilities a concept of pointer to neuron is provided. Pointers represent virtual connections between neurons. In this model, bodies and signals transferring through the neurons connections represent a physical body, and virtual connections between neurons are representing an astral body. It is proposed to create models of artificial neuron networks on the basis of virtual machine supporting the opportunity for paranormal effects. SNN is generally used for natural language processing. == Related models == Computational creativity Semantic hashing Semantic Pointer Architecture Sparse distributed memory
Read more →
Bitstrips

Bitstrips, Inc. was a Canadian media and technology company based in Toronto, founded in 2007 by Jacob Blackstock, David Kennedy, Shahan Panth, Dorian Baldwin, and Jesse Brown. The company created and offered a web application, Bitstrips.com, which allowed users to create comic strips using personalized avatars, and preset templates and poses. Brown and Blackstock explained that the service was meant to enable self-expression without the need to have artistic skills. Bitstrips was first presented in 2008 at South by Southwest in Austin, Texas, and the service later piloted and launched a version designed for use as educational software. The service achieved increasing prominence following the launch of versions for Facebook and mobile platforms. In 2014, Bitstrips launched a spin-off app known as Bitmoji, which allows users to create personalized stickers for use in instant messaging. In July 2016, Snapchat Inc. announced that it had acquired the company; the Bitstrips comic service was shut down, but Bitmoji remains operational, and has subsequently been given greater prominence within Snapchat's overall platform. == History == Bitstrips was co-developed by Toronto-based comic artist Jacob Blackstock and his high school friend, journalist Jesse Brown. The service was originally envisioned as a means to allow anyone to create their own comic strip without needing artistic skills. Brown explained that "it's so difficult and time-consuming to tell a story in comic book form, drawing the same characters again and again in these tiny little panels, and just the amount of craftsmanship required. And even if you can do it well, which I never could, it takes years to make a story." Brown stated that the service would be "groundwork for a whole new way to communicate", and went as far as describing the service as being a "YouTube for comics". Blackstock explained that the concept of Bitstrips was influenced by his own use of comics as a form of socialization; a student, Blackstock and his friends drew comics featuring each other and shared them during classes. He felt that Bitstrips was a "medium for self-expression", stating that "It's not just about you making the comics, but since you and your friends star in these comics, it's like you're the medium. The visual nature of comics just speaks so much louder than text." The service was publicly unveiled at South by Southwest in 2008. In 2009, the service introduced a version oriented towards the educational market, Bitstrips for Schools, which was initially piloted at a number of schools in Ontario. The service was praised by educators for being engaging to students, especially within language classes. Brown noted that students were using the service to create comics outside of class as well, stating that it was "so gratifying and shocking what people do with your tool to make their own stories in ways that you never would have anticipated. Some of them are just brilliant." In December 2012, Bitstrips launched a version for Facebook; by July 2013, Bitstrips had 10 million unique users on Facebook, having created over 50 million comics. In October 2013, Bitstrips launched a mobile app; in two months, Bitstrips became a top-downloaded app in 40 countries, and over 30 million avatars had been created with it. In November 2013, Bitstrips secured a round of funding from Horizons Ventures and Li Ka-shing. In October 2014, Bitstrips launched Bitmoji, a spin-off app that allows users to create stickers featuring Bitstrips characters in various templates. In July 2016, following unconfirmed reports earlier in the year, Snapchat Inc. announced that it had acquired Bitstrips. The company's staff continue to operate out of Toronto, but the original Bitstrips comic service was shut down in favour of focusing exclusively on Bitmoji, leaving many Bitstrips users to call for a reboot of the comic service.
Read more →
Microsoft To Do

Microsoft To Do (previously styled as Microsoft To-Do) is a cloud-based task management application. It allows users to manage their tasks from a smartphone, tablet and computer. The technology is produced by the team behind Wunderlist, which was acquired by Microsoft, and the stand-alone apps feed into the existing Tasks feature of the Outlook product range. == History == Microsoft To Do was first launched as a preview with basic features in April 2017. Later more features were added including Task list sharing in June 2018. In September 2019, a major update to the app was unveiled, adopting a new user interface with a closer resemblance to Wunderlist. The name was also slightly updated by removing the hyphen from To-Do. In May 2020, Microsoft officially closed the doors on Wunderlist, ending its active service in favor of improving and expanding Microsoft To Do.
Read more →
Time-compressed speech

Time-compressed speech refers to an audio recording of verbal text in which the text is presented in a much shorter time interval than it would through normally-paced real time speech. The basic purpose is to make recorded speech contain more words in a given time, yet still be understandable. For example: a paragraph that might normally be expected to take 20 seconds to read, might instead be presented in 15 seconds, which would represent a time-compression of 25% (5 seconds out of 20). The term "time-compressed speech" should not be confused with "speech compression", which controls the volume range of a sound, but does not alter its time envelope. == Methods == While some voice talents are capable of speaking at rates significantly in excess of general norms, the term "time-compressed speech" most usually refers to examples in which the time-reduction has been accomplished through some form of electronic processing of the recorded speech. In general, recorded speech can be electronically time-compressed by: increasing its speed (linear compression); removing silences (selective editing); a combination of the two (non-linear compression). The speed of a recording can be increased, which will cause the material to be presented at a faster rate (and hence in a shorter amount of time), but this has the undesirable side-effect of increasing the frequency of the whole passage, raising the pitch of the voices, which can reduce intelligibility. There are normally silences between words and sentences, and even small silences within certain words, both of which can be reduced or removed ("edited-out") which will also reduce the amount of time occupied by the full speech recording. However, this can also have the effect of removing verbal "punctuation" from the speech, causing words and sentences to run together unnaturally, again reducing intelligibility. Vowels are typically held a minimum of 20 milliseconds, over many cycles of the fundamental pitch. DSP systems can detect the beginning and end of each cycle and then skip over some fraction of those cycles, causing the material to be presented at a faster rate, without changing the pitch, maintaining a "normal" tone of voice. The current preferred method of time-compression is called "non-linear compression", which employs a combination of selectively removing silences; speeding up the speech to make the reduced silences sound normally-proportioned to the text; and finally applying various data algorithms to bring the speech back down to the proper pitch. This produces a more acceptable result than either of the two earlier techniques; however, if unrestrained, removing the silences and increasing the speed can make a selection of speech sound more insistent, possibly to the point of unpleasantness. == Applications == === Advertising === Time-compressed speech is frequently used in television and radio advertising. The advantage of time-compressed speech is that the same number of words can be compressed into a smaller amount of time, reducing advertising costs, and/or allowing more information to be included in a given radio or TV advertisement. It is usually most noticeable in the information-dense caveats and disclaimers presented (usually by legal requirement) at the end of commercials—the aural equivalent of the "fine print" in a printed contract. This practice, however, is not new: before electronic methods were developed, spokespeople who could talk extremely quickly and still be understood were widely used as voice talents for radio and TV advertisements, and especially for recording such disclaimers. === Education === Time-compressed speech has educational applications such as increasing the information density of trainings, and as a study aid. A number of studies have demonstrated that the average person is capable of relatively easily comprehending speech delivered at higher-than-normal rates, with the peak occurring at around 25% compression (that is, 25% faster than normal); this facility has been demonstrated in several languages. Conversational speech (in English) takes place at a rate of around 150 wpm (words per minute), but the average person is able to comprehend speech presented at rates of up to 200-250 wpm without undue difficulty. Blind and severely visually impaired subjects scored similar comprehension levels at even higher rates, up to 300-350 wpm. Blind people have been found to use time-compressed speech extensively, for example, when reviewing recorded lectures from high school and college classes, or professional trainings. Comprehension rates in older blind subjects have been found to be as good, or in some cases better than those found in younger sighted subjects. Other studies have determined that the ability to comprehend highly time-compressed speech tends to fall off with increased age, and is also reduced when the language of the time-compressed speech is not the listener's native language. Non-native speakers can, however, improve their comprehension level of time-compressed speech with multiday training. === Voice Mail === Voice mail systems have employed time-compressed speech since as far back as the 1970s. In this application, the technology enables the rapid review of messages in high-traffic systems, by a relatively small number of people. === Streaming Multimedia === Time-compressed speech has been explored as one of a variety of interrelated factors which may be manipulated to increase the efficiency of streaming multimedia presentations, by significantly reducing the latency times involved in the transfer of large digitally encoded media files.
Read more →
Closest point method

The closest point method (CPM) is an embedding method for solving partial differential equations on surfaces. The closest point method uses standard numerical approaches such as finite differences, finite element or spectral methods in order to solve the embedding partial differential equation (PDE) which is equal to the original PDE on the surface. The solution is computed in a band surrounding the surface in order to be computationally efficient. In order to extend the data off the surface, the closest point method uses a closest point representation. This representation extends function values to be constant along directions normal to the surface. == Definitions == Closest Point function: Given a surface S , c p ( x ) {\displaystyle {\mathcal {S}},cp(\mathbf {x} )} refers to a (possibly non-unique) point belonging to S {\displaystyle {\mathcal {S}}} , which is closest to x {\displaystyle \mathbf {x} } [SE]. Closest point extension: Let S {\displaystyle {\mathcal {S}}} , be a smooth surface in R d {\displaystyle \mathbb {R} ^{d}} . The closest point extension of a function u : S → R {\displaystyle u:{\mathcal {S}}\rightarrow \mathbb {R} } , to a neighborhood Ω {\displaystyle \Omega } of S {\displaystyle {\mathcal {S}}} , is the function v : Ω → R {\displaystyle v:\Omega \rightarrow \mathbb {R} } , defined by v ( x ) = u ( c p ( x ) ) {\displaystyle v(\mathbf {x} )=u(cp(\mathbf {x} ))} . == Closest point method == Initialization consists of these steps [EW]: If it is not already given, a closest point representation of the surface is constructed. A computational domain is chosen. Typically this is a band around the surface. Replace surface gradients by standard gradients in R 3 {\displaystyle \mathbb {R} ^{3}} . Solution is initialized by extending the initial surface data on to the computational domain using the closest point function. After initialization, alternate between the following two steps: Using the closest point function, extend the solution off the surface to the computational domain. Compute the solution to the embedding PDE on a Cartesian mesh in the computational domain for one time step. == Banding == The surface PDE is extended into R 3 {\displaystyle \mathbb {R} ^{3}} however it is only necessary to solve this new PDE near the surface. Hence, we solve the PDE in a band surrounding the surface for efficient computational purposes. Ω c x : ‖ x − c p ( x ) ‖ 2 ≤ λ {\displaystyle \Omega _{c}{x:\|x-cp(x)\|_{2}\leq \lambda }} where λ {\displaystyle \lambda } is the bandwidth. == Example: Heat equation on a circle == Using initial profile u S ( θ , t ) = sin ⁡ ( θ ) {\displaystyle u_{S}(\theta ,t)=\sin(\theta )} leads to the solution u S ( θ , t ) = exp ⁡ ( − t ) sin ⁡ ( θ ) {\displaystyle u_{S}(\theta ,t)=\exp(-t)\sin(\theta )} for the heat equation. Forward Euler time-stepping is used with relation Δ t = 0.1 Δ x 2 {\displaystyle \Delta t=0.1\Delta x^{2}} and degree-four interpolation polynomials for the interpolations. Second-order centered differences are used for the spatial discretization. The CPM results in the expected second order error in the solution u {\displaystyle u} . == Applications == The closest point method can be applied to various PDEs on surfaces. Reaction–diffusion problems on point clouds [RD], eigenvalue problems [EV], and level set equations [LS] are a few examples.
Read more →
VEX Robotics

VEX Robotics is one of the main robotics programs for elementary through university students, and a subset of Innovation First International. The VEX Robotics competitions and programs were overseen by the Robotics Education & Competition Foundation (RECF), until May 2026 when VEX split from the foundation. VEX Robotics Competition was named the largest robotics competition in the world by Guinness World Records. There are four leagues of VEX Robotics competitions designed for different age groups and skill levels: VEX V5 Robotics Competition (previously VEX EDR, VRC) is for middle and high school students, and is the largest competition out of the four. VEX Robotics teams have an opportunity to compete annually in the VEX V5 Robotics Competition (V5RC). VEX IQ Robotics Competition is for elementary and middle school students. VEX IQ robotics teams have an opportunity to compete annually in the VEX IQ Robotics Competition (VIQRC). VEX AI is a 'spinoff' of VEX U, for high school and college level students. The competition features no driver control periods, hence the name 'VEX AI'. VEX AI robotics teams have an opportunity to compete in the VEX AI Competition (VAIC). VEX U is a robotics competition for college and university students. The game is similar to V5RC, but traditionally with separate, more relaxed rules on the construction of their robots. In each of the four leagues, students are given a new challenge annually and must design, build, program, and drive a robot to complete the challenge as best they can. The robotics teams that consistently display exceptional mastery in all of these areas will eventually progress to the VEX Robotics World Championship. The description and rules for the season's competition are released during the world championship of the previous season. From 2021 to 2025, the VEX Robotics World Championship was held in Dallas, Texas each year in mid-April or mid-May, depending on which league the teams are competing in. St. Louis, Missouri will host the event in 2026 and 2027. == VEX V5 == VEX V5 is a STEM learning system designed by VEX Robotics and the REC Foundation to help middle and high school students develop problem-solving and computational thinking skills. It was introduced at the VEX Robotics World Championship in April 2019 as a replacement for a previous system called VEX EDR (VEX Cortex). The program utilizes the VEX V5 Construction and Control System as a standardized hardware, firmware, and software compatibility platform. Robotics teams and clubs can use the VEX V5 system to build robots to compete in the annual VEX V5 Robotics Competition. === Construction and Control System === The VEX V5 Construction and Control System is a metal-based robotics platform with machinable, bolt-together pieces that can be used to construct custom robotic mechanisms. The robot is controlled by a programmable processor known as the VEX V5 Brain. The Brain is equipped with a color LCD touchscreen, 21 hardware ports, an SD card port, a battery port, 8 legacy sensor ports, and a micro-USB programming port. Usage with a VEX V5 Radio enables wireless driving and wireless programming of the brain via the VEX V5 Controller. The controller allows wireless user input to the robot brain, and two controllers can be daisy-chained if necessary. Each controller has two hardware ports, a micro-USB port, two 2-axis joysticks, a monochrome LCD, and twelve buttons. The controller's LCD can be written wirelessly from the robot, providing users with configurable feedback from the robot brain. The VEX V5 Motors connect to the brain via the hardware ports and are equipped with an internal optical shaft encoder to provide feedback on the rotational status of the motor. The motor's speed is programmable but may also be altered by exchanging the internal gear cartridge with one of three cartridges of different gear ratios. The three cartridges are 100 rpm, 200 rpm, and 600 rpm. === VEXcode V5 === VEXcode V5 is a Scratch-based coding environment designed by VEX Robotics for programming VEX Robotics hardware, such as the VEX V5 Brain. The block-style interface makes programming simple for elementary through high-school students. VEXcode is consistent across VEX 123, GO, IQ, and V5 and can be used to program the devices from each. VEXcode allows the block programs to be viewed as equivalent C++ or programs to help more advanced students transition from blocks to text. This also allows easy interconversion between text-based and block-based programming. VEXcode also lets students code in C++, which gives the opportunity to learn basic C++, but to collect data from sensors or to move the drivetrain, VEX uses a header file. === PROS === PROS is a C/C++ programming environment for VEX V5 hardware maintained by students of Purdue University through Purdue ACM SIGBots. It provides a more bare-bones environment for more knowledgeable students that allows for an industry-applicable experience. It has a more robust API that allows for more precise control of the hardware for competition-level uses in VRC/VEX U. It is based on FreeRTOS. == VEX V5 Robotics Competition == VEX V5 Robotics Competition (V5RC) is a robotics competition for registered middle and high school teams that utilize the VEX V5 Construction and Control System. In this competition, teams design, cad, build, and program robots to compete at tournaments. At tournaments, teams participate in qualifying matches where two randomly chosen alliances of two teams each compete for the highest team ranking. Before the Elimination Rounds, the top-ranking teams choose their permanent alliance partners, starting with the highest-ranked team, and continuing until the alliance capacity for the tournament is reached. The new alliances then compete in an elimination bracket, and the tournament champions, alongside other award winners, qualify for their regional culminating event. . The current challenge is VEX V5 Robotics Competition: Override. === General rules === Middle and high school students have the same game and rules. The most general and basic rules for the VEX V5 Robotics Competition are as follows, but each year may have exceptions and/or additional constraints. Each robot is partnered with another robot in a pair called an "alliance". In any given match, each alliance competes against one other alliance. One team is designated as the red alliance, and the other as the blue alliance. No robot may exceed the dimensions of an 18-inch cube until the match has begun. No robot may contain hardware, software, material, or content that is not distributed by or explicitly allowed by VEX Robotics. The playing field consists of a 12-foot by 12-foot square of foam tiles bordered by a wall of metal-framed polycarbonate dividers. Anything outside of these border walls is considered as off of the playing field. The various field elements associated with that season's competition are arranged in a defined and reproducible manner before the start of each match. At the start of the match is a 15-second 'autonomous' period, where all four robots navigate the field based on pre-programmed instructions without driver input. After the autonomous period has ended, the 'driver control' period begins. This stage of the match consists of one minute and forty-five seconds of manual control of the robot using one or two handheld controllers utilized by the respective number of 'drivers'. The object of the match is to attain a higher score, i.e. more points, than the opposing alliance. The method by which the alliances attain these points varies significantly with each season. Throughout the match, the blue alliance is not allowed to enter the red alliance's 'protected zone' of the field, and vice versa. The designated areas of the field are often different for each season. During the autonomous period, the protected zone normally consists of half of the field where the alliance starts, whereas the driver control period rarely features a defined protected zone, as was the case for VRC Tipping Point, VRC High Stakes, and VRC Push Back. Intentionally removing game objects from the field will result in a warning, minor violation, and/or major violation (disqualification). Intentionally and repeatedly damaging any of the robots involved, either during the match or otherwise, will result in immediate disqualification. === 2025-2026 Game: Push Back === The objective of the game is to score as many blocks as possible in goals within a 15-second autonomous period, and 1:45 driver control period. Each field consists of two long goals, two center goals, four loaders, and two park zones. ==== Field Element - Goals ==== The goals may be pictured as 'bridges' above the field. Long goals can fit fifteen blocks of any color, while center goals can fit seven. Goals feature control bonuses that are always awarded to the alliance with the most blocks scored in the control zone of each goal. Center goal control zones inco
Read more →
Ulead DVD MovieFactory

Corel DVD MovieFactory is a video editing and DVD authoring software product for Microsoft Windows, initially made by Ulead Systems and subsequently by Corel. It creates and authors multimedia discs in HD DVD, Blu-ray, DVD Video and DVD Audio. It also creates and rips Audio CDs and MP3 CDs. DVD MovieFactory is commonly bundled with many of the modern Toshiba Satellite laptops. Official Japanese version is also known as MovieWriter.
Read more →
Memory color effect

The memory color effect is the phenomenon that the canonical hue of a type of object acquired through experience (e.g. the sky, a leaf, or a strawberry) can directly modulate the appearance of the actual colors of objects. Human observers acquire memory colors through their experiences with instances of that type. For example, most human observers know that an apple typically has a reddish hue; this knowledge about the canonical color which is represented in memory constitutes a memory color. As an example of the effect, normal human trichromats, when presented with a gray banana, often perceive the gray banana as being yellow - the banana's memory color. In light of this, subjects typically adjust the color of the banana towards the color blue - the opponent color of yellow - when asked to adjust its surface to gray to cancel the subtle activation of banana's memory color. Subsequent empirical studies have also shown the memory color effect on man-made objects (e.g. smurfs, German mailboxes), the effect being especially pronounced for blue and yellow objects. To explain this, researchers have argued that because natural daylight shifts from short wavelengths of light (i.e., bluish hues) towards light of longer wavelengths (i.e., yellowish-orange hues) during the day, the memory colors for blue and yellow objects are recruited by the visual system to a higher degree to compensate for this fluctuation in illumination, thereby providing a stronger memory color effect. == Form identification == Memory color plays a role when detecting an object. In a study where participants were given objects, such as an apple, with two alternate forms for each, a crooked apple and a circular apple, researchers changed the colors of the alternate forms and asked if they could identify them. Most of the participants answered "unsure," suggesting that we use memory color when identifying an object. The research redefined memory color as a phenomenon when "a form's identity affects the phenomenal hue of that form." == Color effect on memorization == Memory color effect can be derived from the human instinct to memorize objects better. Comparing the effect of recognizing gray-scaled images and colored images, results showed that people were able to recall colored images 5% higher compared to gray-scaled images. An important factor was that higher level of contrast between the object and background color influences memory. In a specific study related to this, participants reported that colors were 5% to 10% easier to recognize compared to black and white. == Color constancy and memory color effect == Color constancy is the phenomenon where a surface to appear to be of the same color under a wide rage of illumination. A study tested two hypotheses with regards to color memory; the photoreceptor hypothesis and the surface reflectance hypothesis. The test color was surround either by various color patches forming a complex pattern or a uniform “grey” field at the same chromaticity as that of the illuminant. The test color was presented on a dark background for the control group. It was observed that complex surround results where in line with the surface-reflectance hypothesis and not the photoreceptor hypothesis, showing that the accuracy and precision of color memory are fundamentals to understanding the phenomenon of color constancy. == Significance to the evolution of trichromacy == While objects that possess canonical hues make up a small percentage of the objects which populate humans’ visual experience, the human visual system evolved in an environment populated with objects that possess canonical hues. This suggests that the memory color effect is related to the emergence of trichromacy because it has been argued that trichromacy evolved to optimize the ability to detect ripe fruits—objects that appear in canonical hues. == In perception research == In perception research, the memory color effect is cited as evidence for the opponent color theory, which states that four basic colors can be paired with its opponent color: red—green, blue—yellow. This explains why participants adjust the ripe banana color to a blueish tone to make its memory color yellow as gray. Researchers have also found empirical evidence that suggests memory color is recruited by the visual system to achieve color constancy. For example, participants had a lower percentage of color constancy when looking at a color incongruent scene, such as a purple banana, compared to a color diagnostical scene, a yellow banana. This suggests that color constancy is influenced by the color of objects that we are familiar with, which the memory color effect takes part.
Read more →
Speculative decoding

Speculative decoding is an inference-time optimization for autoregressive large language models (LLMs) that generates multiple tokens per decoding step instead of one. A smaller draft model proposes a sequence of candidate tokens, and the larger target model verifies them in a single forward pass through a modified rejection sampling scheme. The verification preserves the target model's original output distribution, so the technique produces the same results as standard decoding while cutting latency by roughly two to three times. The name is an analogy to speculative execution in CPU design, where a processor runs instructions along a predicted branch before the outcome is known. == Background == Standard autoregressive decoding in large language models generates one token at a time. The model computes a probability distribution over its vocabulary, samples the next token, and feeds that token back as input. For large models, this process is bottlenecked by memory bandwidth rather than arithmetic throughput: loading the model's parameters from high-bandwidth memory (HBM) to the processor takes up most of the wall-clock time at each step. Because of this, a forward pass over one token and a forward pass over several tokens in a batch take roughly the same time. Speculative decoding relies on this property. == Mechanism == The technique alternates between two phases: drafting and verification. During drafting, a fast approximation model generates a short run of K candidate tokens, typically between 3 and 12. The draft model is usually a much smaller version of the target model or a lightweight auxiliary network. During verification, the target model scores the entire draft sequence in one batched forward pass. A modified rejection sampling algorithm compares the draft and target probabilities at each position. If the target model would have been at least as likely to produce a given token, that token is accepted; the first token that fails is resampled from a corrected distribution, and everything after it is thrown out. The result is that the output distribution is the same as if each token had been generated one at a time. How many tokens get accepted per cycle depends on how well the draft model matches the target. For common words and predictable continuations the match tends to be good, so the target model can confirm several tokens at once. == History == An early precursor was blockwise parallel decoding, proposed in 2018 by Stern, Shazeer, and Uszkoreit. Their method predicted multiple future tokens through auxiliary prediction heads and validated them against the autoregressive model, but it only worked with greedy decoding and did not preserve the full sampling distribution. The modern form of the technique came from Yaniv Leviathan, Matan Kalman, and Yossi Matias at Google Research, who posted "Fast Inference from Transformers via Speculative Decoding" on arXiv in November 2022. Separately and at about the same time, Charlie Chen and colleagues at DeepMind arrived at a closely related method they called speculative sampling, published in February 2023. Both papers introduced the use of rejection sampling to guarantee that the output distribution is unchanged. Leviathan et al. showed roughly 2–3x speedup on T5-XXL (11 billion parameters); Chen et al. reported 2–2.5x on the Chinchilla model (70 billion parameters). The Leviathan et al. paper was presented as an oral at the International Conference on Machine Learning in July 2023. == Variants == SpecInfer (Miao et al., 2024) uses multiple small language models to jointly build a tree of candidate continuations rather than a single chain. The target model verifies the whole tree in parallel and keeps the longest valid path, with reported speedups of 1.5–3.5x. Medusa (Cai et al., 2024) takes a different approach by not using a separate draft model at all. Extra lightweight decoding heads are attached to the target model itself, and each one predicts a token at a different future position. The candidates are evaluated through a tree-structured attention mechanism. The authors measured 2.2–3.6x speedup. EAGLE (Li et al., 2024) performs autoregression on the target model's internal feature representations (specifically the second-to-top layer) rather than on tokens directly. On LLaMA 2 Chat 70B, this gave a 2.7–3.5x latency reduction. Later versions added dynamic draft trees (EAGLE-2) and further optimizations (EAGLE-3), reaching 3–6.5x speedup. == Adoption == By 2024, speculative decoding had become a standard part of production LLM serving. Google uses it in the AI Overviews feature of Google Search. Open-source inference frameworks such as vLLM, NVIDIA's TensorRT-LLM, and SGLang all include built-in support for speculative decoding and its variants. Apple, AWS, and Meta have also published research extending the method or deploying it at scale.
Read more →
Feed forward (control)

A feed forward (sometimes written feedforward) is an element or pathway within a control system that passes a controlling signal from a source in its external environment to a load elsewhere in its external environment. This is often a command signal from an external operator. In control engineering, a feedforward control system is a control system that uses sensors to detect disturbances affecting the system and then applies an additional input to minimize the effect of the disturbance. This requires a mathematical model of the system so that the effect of disturbances can be properly predicted. A control system which has only feed-forward behavior responds to its control signal in a pre-defined way without responding to the way the system reacts; it is in contrast with a system that also has feedback, which adjusts the input to take account of how it affects the system, and how the system itself may vary unpredictably. In a feed-forward system, the control variable adjustment is not error-based. Instead it is based on knowledge about the process in the form of a mathematical model of the process and knowledge about, or measurements of, the process disturbances. Some prerequisites are needed for control scheme to be reliable by pure feed-forward without feedback: the external command or controlling signal must be available, and the effect of the output of the system on the load should be known (that usually means that the load must be predictably unchanging with time). Sometimes pure feed-forward control without feedback is called 'ballistic', because once a control signal has been sent, it cannot be further adjusted; any corrective adjustment must be by way of a new control signal. In contrast, 'cruise control' adjusts the output in response to the load that it encounters, by a feedback mechanism. These systems could relate to control theory, physiology, or computing. == Overview == With feed-forward or feedforward control, the disturbances are measured and accounted for before they have time to affect the system. In the house example, a feed-forward system may measure the fact that the door is opened and automatically turn on the heater before the house can get too cold. The difficulty with feed-forward control is that the effects of the disturbances on the system must be accurately predicted, and there must not be any unmeasured disturbances. For instance, if a window was opened that was not being measured, the feed-forward-controlled thermostat might let the house cool down. The term has specific meaning within the field of CPU-based automatic control. The discipline of feedforward control as it relates to modern, CPU based automatic controls is widely discussed, but is seldom practiced due to the difficulty and expense of developing or providing for the mathematical model required to facilitate this type of control. Open-loop control and feedback control, often based on canned PID control algorithms, are much more widely used. There are three types of control systems: open-loop, feed-forward, and feedback. An example of a pure open-loop control system is manual non-power-assisted steering of a motor car; the steering system does not have access to an auxiliary power source and does not respond to varying resistance to turning of the direction wheels; the driver must make that response without help from the steering system. In comparison, power steering has access to a controlled auxiliary power source, which depends on the engine speed. When the steering wheel is turned, a valve is opened which allows fluid under pressure to turn the wheels. A sensor monitors that pressure so that the valve only opens enough to cause the correct pressure to reach the wheel turning mechanism. This is feed-forward control where the output of the system, the change in direction of travel of the vehicle, plays no part in the system. See Model predictive control. If the driver is included in the system, then they do provide a feedback path by observing the direction of travel and compensating for errors by turning the steering wheel. In that case you have a feedback system, and the block labeled System in Figure(c) is a feed-forward system. In other words, systems of different types can be nested, and the overall system regarded as a black-box. Feedforward control is distinctly different from open-loop control and teleoperator systems. Feedforward control requires a mathematical model of the plant (process and/or machine being controlled) and the plant's relationship to any inputs or feedback the system might receive. Neither open-loop control nor teleoperator systems require the sophistication of a mathematical model of the physical system or plant being controlled. Control based on operator input without integral processing and interpretation through a mathematical model of the system is a teleoperator system and is not considered feedforward control. == History == Historically, the use of the term feedforward is found in works by Harold S. Black in US patent 1686792 (invented 17 March 1923) and D. M. MacKay as early as 1956. While MacKay's work is in the field of biological control theory, he speaks only of feedforward systems. MacKay does not mention feedforward control or allude to the discipline of feedforward controls. MacKay and other early writers who use the term feedforward are generally writing about theories of how human or animal brains work. Black also has US patent 2102671 invented 2 August 1927 on the technique of feedback applied to electronic systems. The discipline of feedforward controls was largely developed by professors and graduate students at Georgia Tech, MIT, Stanford and Carnegie Mellon. Feedforward is not typically hyphenated in scholarly publications. Meckl and Seering of MIT and Book and Dickerson of Georgia Tech began the development of the concepts of Feedforward Control in the mid-1970s. The discipline of Feedforward Controls was well defined in many scholarly papers, articles and books by the late 1980s. == Benefits == The benefits of feedforward control are significant and can often justify the extra cost, time and effort required to implement the technology. Control accuracy can often be improved by as much as an order of magnitude if the mathematical model is of sufficient quality and implementation of the feedforward control law is well thought out. Energy consumption by the feedforward control system and its driver is typically substantially lower than with other controls. Stability is enhanced such that the controlled device can be built of lower cost, lighter weight, springier materials while still being highly accurate and able to operate at high speeds. Other benefits of feedforward control include reduced wear and tear on equipment, lower maintenance costs, higher reliability and a substantial reduction in hysteresis. Feedforward control is often combined with feedback control to optimize performance. == Model == The mathematical model of the plant (machine, process or organism) used by the feedforward control system may be created and input by a control engineer or it may be learned by the control system. Control systems capable of learning and/or adapting their mathematical model have become more practical as microprocessor speeds have increased. The discipline of modern feedforward control was itself made possible by the invention of microprocessors. Feedforward control requires integration of the mathematical model into the control algorithm such that it is used to determine the control actions based on what is known about the state of the system being controlled. In the case of control for a lightweight, flexible robotic arm, this could be as simple as compensating between when the robot arm is carrying a payload and when it is not. The target joint angles are adjusted to place the payload in the desired position based on knowing the deflections in the arm from the mathematical model's interpretation of the disturbance caused by the payload. Systems that plan actions and then pass the plan to a different system for execution do not satisfy the above definition of feedforward control. Unless the system includes a means to detect a disturbance or receive an input and process that input through the mathematical model to determine the required modification to the control action, it is not true feedforward control. === Open system === In control theory, an open system is a feed forward system that does not have any feedback loop to control its output. In contrast, a closed system uses on a feedback loop to control the operation of the system. In an open system, the output of the system is not fed back into the input to the system for control or operation. == Applications == === Physiological feed-forward system === In physiology, feed-forward control is exemplified by the normal anticipatory regulation of heartbeat in advance of actual physical exertion by the central autonomic network. Feed-forward
Read more →
Kuwahara filter

The Kuwahara filter is a non-linear smoothing filter used in image processing for adaptive noise reduction. Most filters that are used for image smoothing are linear low-pass filters that effectively reduce noise but also blur out the edges. However the Kuwahara filter is able to apply smoothing on the image while preserving the edges. It is named after Michiyoshi Kuwahara, Ph.D., who worked at Kyoto and Osaka Sangyo Universities in Japan, developing early medical imaging of dynamic heart muscle in the 1970s and 80s. == The Kuwahara operator == Suppose that I ( x , y ) {\displaystyle I(x,y)} is a grey scale image and that we take a square window of size 2 a + 1 {\displaystyle 2a+1} centered around a point ( x , y ) {\displaystyle (x,y)} in the image. This square can be divided into four smaller square regions Q i = 1 ⋯ 4 {\displaystyle Q_{i=1\cdots 4}} each of which will be Q i ( x , y ) = { [ x , x + a ] × [ y , y + a ] if i = 1 [ x − a , x ] × [ y , y + a ] if i = 2 [ x − a , x ] × [ y − a , y ] if i = 3 [ x , x + a ] × [ y − a , y ] if i = 4 {\displaystyle Q_{i}(x,y)={\begin{cases}\left[x,x+a\right]\times \left[y,y+a\right]&{\mbox{ if }}i=1\\\left[x-a,x\right]\times \left[y,y+a\right]&{\mbox{ if }}i=2\\\left[x-a,x\right]\times \left[y-a,y\right]&{\mbox{ if }}i=3\\\left[x,x+a\right]\times \left[y-a,y\right]&{\mbox{ if }}i=4\\\end{cases}}} where × {\displaystyle \times } is the cartesian product. Pixels located on the borders between two regions belong to both regions so there is a slight overlap between subregions. The arithmetic mean m i ( x , y ) {\displaystyle m_{i}(x,y)} and standard deviation σ i ( x , y ) {\displaystyle \sigma _{i}(x,y)} of the four regions centered around a pixel (x,y) are calculated and used to determine the value of the central pixel. The output of the Kuwahara filter Φ ( x , y ) {\displaystyle \Phi (x,y)} for any point ( x , y ) {\displaystyle (x,y)} is then given by Φ ( x , y ) = m i ( x , y ) {\textstyle \Phi (x,y)=m_{i}(x,y)} where i = a r g min j ⁡ σ j ( x , y ) {\displaystyle i=\operatorname {arg\min } _{j}\sigma _{j}(x,y)} . This means that the central pixel will take the mean value of the area that is most homogenous. The location of the pixel in relation to an edge plays a great role in determining which region will have the greater standard deviation. If for example the pixel is located on a dark side of an edge it will most probably take the mean value of the dark region. On the other hand, should the pixel be on the lighter side of an edge it will most probably take a light value. On the event that the pixel is located on the edge it will take the value of the more smooth, least textured region. The fact that the filter takes into account the homogeneity of the regions ensures that it will preserve the edges while using the mean creates the blurring effect. Similarly to the median filter, the Kuwahara filter uses a sliding window approach to access every pixel in the image. The size of the window is chosen in advance and may vary depending on the desired level of blur in the final image. Bigger windows typically result in the creation of more abstract images whereas small windows produce images that retain their detail. Typically windows are chosen to be square with sides that have an odd number of pixels for symmetry. However, there are variations of the Kuwahara filter that use rectangular windows. Additionally, the subregions do not need to overlap or have the same size as long as they cover all of the window. == Color images == For color images, the filter should not be performed by applying the filter to each RGB channel separately, and then recombining the three filtered color channels to form the filtered RGB image. The main problem with that is that the quadrants will have different standard deviations for each of the channels. For example, the upper left quadrant may have the lowest standard deviation in the red channel, but the lower right quadrant may have the lowest standard deviation in the green channel. This situation would result in the color of the central pixel to be determined by different regions, which might result in color artifacts or blurrier edges. To overcome this problem, for color images a slightly modified Kuwahara filter must be used. The image is first converted into another color space, the HSV color space. The modified filter then operates on only the "brightness" channel, the Value coordinate in the HSV model. The variance of the "brightness" of each quadrant is calculated to determine the quadrant from which the final filtered color should be taken from. The filter will produce an output for each channel which will correspond to the mean of that channel from the quadrant that had the lowest standard deviation in "brightness". This ensures that only one region will determine the RGB values of the central pixel. ImageMagick uses a similar approach, but using the Rec. 709 Luma as the brightness metric. === Julia Implementation === == Applications == Originally the Kuwahara filter was proposed for use in processing RI-angiocardiographic images of the cardiovascular system. The fact that any edges are preserved when smoothing makes it especially useful for feature extraction and segmentation and explains why it is used in medical imaging. The Kuwahara filter however also finds many applications in artistic imaging and fine-art photography due to its ability to remove textures and sharpen the edges of photographs. The level of abstraction helps create a desirable painting-like effect in artistic photographs especially in the case of the colored image version of the filter. These applications have known great success and have encouraged similar research in the field of image processing for the arts. Although the vast majority of applications have been in the field of image processing there have been cases that use modifications of the Kuwahara filter for machine learning tasks such as clustering. The Kuwahara filter has been implemented in CVIPtools. The Kuwahara filter is present as a shader node in Blender. == Drawbacks and restrictions == The Kuwahara filter despite its capabilities in edge preservation has certain drawbacks. At a first glance it is noticeable that the Kuwahara filter does not take into account the case where two regions have equal standard deviations. This is not often the case in real images since it is rather hard to find two regions with exactly the same standard deviation due to the noise that is always present. In cases where two regions have similar standard deviations the value of the center pixel could be decided at random by the noise in these regions. Again this would not be a problem if the regions had the same mean. However, it is not unusual for regions of very different means to have the same standard deviation. This makes the Kuwahara filter susceptible to noise. Different ways have been proposed for dealing with this issue, one of which is to set the value of the center pixel to ( m 1 + m 2 ) / 2 {\textstyle (m_{1}+m_{2})/2} in cases where the standard deviation of two regions do not differ more than a certain value D {\displaystyle D} . The Kuwahara filter is also known to create block artifacts in the images especially in regions of the image that are highly textured. These blocks disrupt the smoothness of the image and are considered to have a negative effect in the aesthetics of the image. This phenomenon occurs due to the division of the window into square regions. A way to overcome this effect is to take windows that are not rectangular(i.e. circular windows) and separate them into more non-rectangular regions. There have also been approaches where the filter adapts its window depending on the input image. == Extensions of the Kuwahara filter == The success of the Kuwahara filter has spurred an increase the development of edge-enhancing smoothing filters. Several variations have been proposed for similar use most of which attempt to deal with the drawbacks of the original Kuwahara filter. The "Generalized Kuwahara filter" proposed by P. Bakker considers several windows that contain a fixed pixel. Each window is then assigned an estimate and a confidence value. The value of the fixed pixel then takes the value of the estimate of the window with the highest confidence. This filter is not characterized by the same ambiguity in the presence of noise and manages to eliminate the block artifacts. The "Mean of Least Variance"(MLV) filter, proposed by M.A. Schulze also produces edge-enhancing smoothing results in images. Similarly to the Kuwahara filter it assumes a window of size 2 d − 1 × 2 d − 1 {\displaystyle 2d-1\times 2d-1} but instead of searching amongst four subregions of size d × d {\displaystyle d\times d} for the one with minimum variance it searches amongst all possible d × d {\displaystyle d\times d} subregions. This means the central pixel of the window will be assigned the mean of the one subregion out of a poss
Read more →
Mathematical morphology

Mathematical morphology (MM) is a theory and technique for analyzing and processing geometrical structures. It's based on set theory, lattice theory, topology, and random functions. MM is most commonly applied to digital images, but it can be employed as well on graphs, surface meshes, solids, and many other spatial structures. Topological and geometrical continuous-space concepts such as size, shape, convexity, connectivity, and geodesic distance, were introduced by MM on both continuous and discrete spaces. MM is also the foundation of morphological image processing, which consists of a set of operators that transform images according to the above characterizations. The basic morphological operators are erosion, dilation, opening and closing. MM was originally developed for binary images, and was later extended to grayscale functions and images. The subsequent generalization to complete lattices is widely accepted today as MM's theoretical foundation. == History == Mathematical Morphology was developed in 1964 by the collaborative work of Georges Matheron and Jean Serra, at the École des Mines de Paris, France. Matheron supervised the PhD thesis of Serra, devoted to the quantification of mineral characteristics from thin cross sections, and this work resulted in a novel practical approach, as well as theoretical advancements in integral geometry and topology. In 1968, the Centre de Morphologie Mathématique was founded by the École des Mines de Paris in Fontainebleau, France, led by Matheron and Serra. During the rest of the 1960s and most of the 1970s, MM dealt essentially with binary images, treated as sets, and generated a large number of binary operators and techniques: Hit-or-miss transform, dilation, erosion, opening, closing, granulometry, thinning, skeletonization, ultimate erosion, conditional bisector, and others. A random approach was also developed, based on novel image models. Most of the work in that period was developed in Fontainebleau. From the mid-1970s to mid-1980s, MM was generalized to grayscale functions and images as well. Besides extending the main concepts (such as dilation, erosion, etc.) to functions, this generalization yielded new operators, such as morphological gradients, top-hat transform and the Watershed (MM's main segmentation approach). In the 1980s and 1990s, MM gained a wider recognition, as research centers in several countries began to adopt and investigate the method. MM started to be applied to a large number of imaging problems and applications, especially in the field of non-linear filtering of noisy images. In 1986, Serra further generalized MM, this time to a theoretical framework based on complete lattices. This generalization brought flexibility to the theory, enabling its application to a much larger number of structures, including color images, video, graphs, meshes, etc. At the same time, Matheron and Serra also formulated a theory for morphological filtering, based on the new lattice framework. The 1990s and 2000s also saw further theoretical advancements, including the concepts of connections and levelings. In 1993, the first International Symposium on Mathematical Morphology (ISMM) took place in Barcelona, Spain. Since then, ISMMs are organized every 2–3 years: Fontainebleau, France (1994); Atlanta, USA (1996); Amsterdam, Netherlands (1998); Palo Alto, CA, USA (2000); Sydney, Australia (2002); Paris, France (2005); Rio de Janeiro, Brazil (2007); Groningen, Netherlands (2009); Intra (Verbania), Italy (2011); Uppsala, Sweden (2013); Reykjavík, Iceland (2015); Fontainebleau, France (2017); and Saarbrücken, Germany (2019). =
Read more →
Cups (app)

Cups (stylized as CUPS) was a mobile app launched in New York City in April 2014. It was a mobile payment and discovery platform for independent coffee shops nearby. The app was active in more than 400 cafes in New York, San Francisco, Philadelphia, Nashville, Minneapolis and Saint Paul, and other U.S. cities. == History == Cups was founded in Israel in 2012 by Gilad Rotem and four other co-founders, who were all high school friends. The company ran a limited beta pilot in Tel Aviv and Jerusalem, featuring 80 locations, from September 2012 until September 2014. Customers received all-you-can-drink coffee at certain coffee shops in Tel Aviv for approximately $45 a month. In October 2013, the founders relocated to New York. Cups participated in the Entrepreneur's Roundtable Accelerator program and went live in New York in 2014, initially working with 50 small coffee shops in Manhattan and Brooklyn. In early 2016, the company launched 30 locations in Philadelphia in February, followed by 40 more locations in San Francisco in March. == Functionality == The Cups app gave the user a list of the nearest participating coffee shops to their current location. The app user can order a drink using the app and pay the cashier with their phone. The cashier would enter a code that entered the purchase into the app's system. The app also allowed for onboard tipping and food purchases. The company reimbursed the coffee shop and kept a portion of their sales. In early 2016, the Cups Café Network was launched, using bulk purchasing power to land discounts with service providers which would normally be reserved for larger chains. In this way, the company aimed to help its café partners compete with the larger coffee chains.
Read more →
Dating app

An online dating application, commonly known as a dating app, is an online dating service presented through a mobile phone application. These apps often take advantage of a smartphone's GPS location capabilities, always on-hand presence, and access to mobile wallets. These apps aim to speed up the online dating process of sifting through potential dating partners, chatting, flirting, and potentially meeting or becoming romantically involved. Online dating apps are now mainstream in the United States. As of 2017, online dating (which included both apps and other online dating services) was the principal method by which new couples in the U.S. met. The percentage of couples meeting online is predicted to increase to 70% by 2040. == Origins == The first computerized dating service was launched in 1964, the St. James Computer Dating Service, which became known as Com-Pat. The first U.S. dating service that used computerized match making was Operation Match. It required men and women to complete a questionnaire and was launched in 1965. Operation Match inspired the methodology of Dateline, which became popular in the 1970s and 1980s. Match.com was launched in 1995 and turned computerized match making into a profitable business. Grindr targeted gay and bisexual men at launch. Tinder, launched in 2012, led to a growth of online dating applications by both new providers and existing online dating services that expanded into the mobile app market. == Usage by demographic group == Online dating applications typically target a younger demographic group, though some apps, like Senior Match and Silver Singles are geared toward the 50 and up demographic. In 2016, almost 50% of people knew of someone who use the services or had met their loved one through the service. After the iPhone launch in 2007, online dating data has mushroomed as application usage increased. In 2005, only 10% of 18-24 year olds reported to have used online dating services; this number quickly grew to over 27%, making this target demographic the largest number of users for most applications. When Pew Research Center conducted a study in 2016, they found that 59% of U.S. adults agreed that online dating is a good way to meet people compared to 44% in 2005. This explosion in usage can be explained by the increased use of smartphones. By the end of 2022, it is expected there will be 413 million active users of online dating services worldwide. A 2023 Pew Research Center survey of 6,034 American adults found that 30% had ever used an online dating site or app, including 53% of those aged 18 to 29, 37% of those aged 30 to 49, and 17% of those aged 50 and over. Lesbian, gay and bisexual respondents reported using dating apps at nearly twice the rate of straight respondents (51% versus 28%), and 36% of divorced, separated or widowed adults had used one, compared with 16% of married adults. The increased use of smartphones by those 65 and older has also driven that population to the use dating apps. The Pew Research Center found that usage increase by 8 points since last surveyed in 2012. A study in 2021 found that more than one-third of seniors have dated in the past 5 years, and roughly one-third of those dating seniors have turned to dating apps. During the COVID-19 pandemic, Morning Consult found that more Americans were using online dating apps than ever before. In one survey in April 2020, the company discovered that 53% of U.S. adults who use online dating apps have been using them more during the pandemic. As of February 2021, that share increased to 71 percent. Research using Hofstede's cultural dimensions theory has indicated that norms about online dating applications tend to differ across cultures. A study published in the Journal of Creative Communications looked into the relationships between dating-app advertisements from over 51 countries and the cultural dimensions of these countries. The results revealed that dating-app advertisements appealed to multiple cultural needs, including the needs for relationships, friendship, entertainment, sex, status, design and identity. The use of these appeals was found to be 'congruent with ... the individualism/collectivism and uncertainty avoidance cultural dimensions.' == Popular applications == Following Tinder's success, other companies released dating applications. Raya was released in 2015 as a membership-based dating app, allowing entrance only through referrals, which was marketed as a dating app for celebrities. In early 2026, Hily surpassed Bumble to become the third most-used dating application in the United States and the fifth highest-grossing overall, driven largely by growing popularity among Generation Z users, while remaining behind Tinder and Hinge, both owned by Match Group. A number of dating apps have been created targeting adherents of particular religions seeking partners of the same religion, such as Muzmatch for Muslims, Christian Mingle, SALT, and Christian Connection for Christians, and JSwipe and JDate for Jews. === VR Dating === VR Dating is an application of Social VR where people can exist, collaborate, and perform various activities together. Virtual reality apps use virtual and augmented realities to make the dating experience more lifelike and more effective, as well as allow people to expand what is already possible in the world of online dating. There are several online platforms of VR Dating. The VR dating app Nevermet is the VR equivalent of Tinder, where people can search and find on dates. However, instead of actual real-life pictures, users will update pictures of virtual selves and will be interacting with avatars rather than real faces. Flirtual is a self-contained social VR app that serves to match users who then decide where and how to meet in VR. Flirtual hosts speed dating and social events in VR. == Effects on dating == The usage of online dating applications can have both advantages and disadvantages: === Advantages === Many of the applications provide personality tests for matching or use algorithms to match users. These factors enhance the possibility of users getting matched with a compatible candidate. Users are in control; they are provided with many options so there are enough matches that fit their particular type. Users can simply choose to not match the candidates that they know they are not interested in. Narrowing down options is easy. Once users think they are interested, they are able to chat and get to know the potential candidate. This form of communication can reduce the time, cost, and uncertainty often associated with traditional dating methods. Online dating offers convenience; people want dating to work around their schedules. Online dating can also increase self-confidence; even if users get rejected, they know there are hundreds of other candidates that will want to match with them so they can simply move on to the next option. In fact, 60% of U.S. adults agree that online dating is a good way to meet people and 66% say they have gone on a real date with someone they met through an application. Today, 5% of married Americans or Americans in serious relationships said they met their significant other online. The 39% of online dating users (representing 12% of all U.S. adults) say they have been in a committed relationship or married someone they met on a dating site or app. ==== Rejection sensitive individuals ==== Individuals high in rejection sensitivity are more likely to use online dating applications. As they tend to expect, perceive and overreact to rejection, rejection sensitive individuals struggle with traditional dating. Online dating applications allow for them to better reveal their true selves, potentially increasing their dating success. Online dating applications also obscure rejection cues, alleviating the rejection-related distress experienced by rejection sensitive individuals. ==== Anxiously attached individuals ==== Individuals high in attachment anxiety are also more likely to use online dating applications. While they harbour negative self-views, anxiously attached individuals are also more eager to enter and commit to relationships. Online dating applications allow for them to present "an authentic yet ideal version of themselves", mitigating their tendencies to view themselves as undesirable. This increases their romantic confidence, and potentially alleviates their anxiety when searching for a romantic partner. === Disadvantages === Sometimes having too many options can be overwhelming. With so many options available, users can get lost in their choices and end up spending too much time looking for the "perfect" candidate instead of using that time to start a real relationship. In addition, the algorithms and matching systems put in place may not always be as accurate as users think. There is no perfect system that can match two people's personalities perfectly every time. Communication online also lacks the physical chemistry aspec
Read more →
Pixelmator Pro

Pixelmator Pro is a photo, video, and vector graphic editor developed by Apple for macOS and iPadOS as part of its Pixelmator and pro apps platforms and as a part of their Apple Creator Studio suite of applications. Pixelmator Pro relies heavily on technologies from Apple platforms such as Metal, CoreML, Core Image, AVFoundation, GCD, and SwiftUI. == Features == GPU accelerated with Metal 50+ standard image editing tools Layer-based image editor Video editing support Vector graphic support (including SVG support) AI-powered editing features such as background removal ML Super Resolution and Smart Replace Supports a variety of media formats (JPEG, RAW, Apple ProRAW, PSD, PNG, GIF, MP4, HEIF, etc) == Reception == Pixelmator Pro was generally well-received by reviewers who praised its deep use of machine learning, fully macOS-native design, and relatively affordable one-time purchase compared to subscription software such as Adobe Photoshop. Some reviewers criticized that some features are hard to find or hard to use. It was awarded Apple's Mac App of the Year in 2018. Pixelmator Pro does not have support for panorama stitching. == Acquisition by Apple == On November 1, 2024, the Pixelmator Team announced that they were to be acquired by Apple, subject to regulatory approval. Their site promises "There will be no material changes to the Pixelmator Pro, Pixelmator for iOS, and Photomator apps at this time." The acquisition was completed in February 2025. On January 13, 2026, Apple announced that a new version of Pixelmator Pro with AI features would be included in its new Apple Creator Studio subscription, the app would be brought to the iPad and the Mac app would be redesigned with Liquid Glass. == Version history == == Applescript == In 2020 Pixelmator Pro added the ability to leverage Apple's automation language 'AppleScript' to automate many tasks in version 1.8 (Lynx). This enabled simple and advanced automation activities such as image resize, crop, color adjustments, format change, moving layers around, and more advanced actions like removing background, Gaussian blur, text replacement, shadows, color replacement, etc.
Read more →