AI Email Management

AI Email Management — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • IMPACT (computer graphics)

    IMPACT (computer graphics)

    IMPACT (sometimes spelled Impact) is a computer graphics architecture for Silicon Graphics computer workstations. IMPACT Graphics was developed in 1995 and was available as a high-end graphics option on workstations released during the mid-1990s. IMPACT graphics gives the workstation real-time 2D and 3D graphics rendering capability similar to that of even high-end PCs made well after IMPACT's introduction. IMPACT graphics systems consist of either one or two Geometry Engines and one or two Raster Engines in various configurations. IMPACT graphics consists of five graphics subsystems: the Command Engine, Geometry Subsystem, Raster Engine, framebuffer and Display Subsystem. IMPACT Graphics can produce resolutions up to 1600 x 1200 pixels with 32-bit color and can also process unencoded NTSC and PAL analog television signals. IMPACT graphics subsystems come in three configurations for SGI Indigo2 IMPACT workstations: Solid IMPACT, High IMPACT, and Maximum IMPACT. The equivalent configurations also exist for the SGI Octane workstation but are referred to as SI, SSI, and MXI (I-series). Later Octane workstations used a similar configuration but with updated ASIC chips and are referred to as SE, SSE, and MXE (E-series). IMPACT uses Rambus RDRAM for texture memory. The IMPACT graphics architecture was superseded by SGI's VPro graphics architecture in 1997.

    Read more →
  • NHS COVID-19

    NHS COVID-19

    NHS COVID-19 was a voluntary contact tracing app for monitoring the spread of the COVID-19 pandemic in England and Wales, in use from 24 September 2020 until 27 April 2023. It was available for Android and iOS smartphones, and could be used by anyone aged 16 or over. Two versions of the app were created. The first was commissioned by NHSX and developed by the Pivotal division of American software company VMware. A pilot deployment began in May 2020, but on 18 June development of the app was abandoned in favour of a second design using the Apple/Google Exposure Notification system. Scotland and Northern Ireland had separate contact tracing apps. A 2023 study estimated that in its first year of use, the app's contact tracing function prevented an estimated 1 million cases, and 9,600 deaths. == Description == The app allowed users to: See the alert level of their local authority area (in Wales) or information about restrictions (in England); to enable this, the user must enter the first half of their postcode "Check in" at places displaying an NHS QR code poster (no longer required by legislation after 26 January 2022, removed from the app the next month) Be notified when they have been in close contact with someone who has tested positive for the virus Be notified when local health protection teams determine that people with the virus had attended a business or other venue around the same time as the user Check their symptoms, and book a coronavirus test if necessary If asked to self-isolate, receive information and a daily "countdown". At first, "close contact" was defined as being within 2 metres for 15 minutes, or within 4 metres for a longer time. These time durations were reduced from 29 October 2020, to as little as three minutes when the other person is at their most infectious, i.e. soon after they begin showing symptoms. === Implementation === The Android app was coded in Kotlin, and the iOS app in Swift. The backend used Java and is deployed to Amazon Web Services using Terraform. The code of the app and back-end is open-source and available on GitHub. == Context == The app was part of the UK's test and trace programme which was chaired by Dido Harding; from 12 May 2020 Tom Riordan, chief executive of Leeds City Council, led the tracing effort. == First phase and cancellation == === Description === In March 2020, NHSX commissioned a contact tracing app to monitor the spread in the United Kingdom of the coronavirus disease 2019 (COVID-19) in the 2020 pandemic, developed by the Pivotal division of American software company VMware. The app used a centralised approach, in contrast to the Google / Apple contact tracing project. NHSX consulted ethicists and GCHQ's National Cyber Security Centre (NCSC) about the privacy aspects. The app recorded the make and model of the phone and asked the user for their postcode area. It generated a unique installation identification number and also a daily identification number. It then used Bluetooth Low Energy (BLE) to record the daily identification number of other users nearby. If a user was unwell, they could tell the app about symptoms which are characteristic of COVID-19, such as a fever and cough. These details were then passed to a central NHS server. This would assess the information and notify other users that have been in contact, giving them appropriate advice such as physical distancing. The NHS would also arrange for a swab test of the unwell user and the outcome would determine further notifications to contacts: if the test confirmed infection with COVID-19, the contacts would be asked to isolate. By June 2020, £11.8 million had been spent on the app; in 2020–21, £35 million was spent on the app. === Deployment === The first public trial of the app began on the Isle of Wight on 5 May 2020 and by 11 May it had been downloaded 55,000 times. When the first national contact tracing schemes were launched – Test, Trace, Protect in Wales on 13 May, then on 28 May NHS Test and Trace in England, and Test and Protect in Scotland – the app was not ready to be included. Replying to a question at the government's daily briefing on 8 June, Hancock was unable to give a date for rollout of the app in England, saying it would be brought in "when it's right to do so". On 17 June, Lord Bethell, junior minister for Innovation at the Department of Health and Social Care, said "we're seeking to get something going before the winter ... it isn't a priority for us at the moment". On 18 June, Health Secretary Matt Hancock announced development would switch to the Apple/Google system after admitting that Apple's restrictions on usage of Bluetooth prevented the app from working effectively. At the same press briefing Dido Harding, leader of the UK's test and trace programme, said "What we've done in really rigorously testing both our own Covid-19 app and the Google-Apple version is demonstrate that none of them are working sufficiently well enough to be actually reliable to determine whether any of us should self-isolate for two weeks [and] that's true across the world". === Concerns === The first, ultimately rejected, version of the app was subject to privacy concerns, the government backtracking on initial statements that the data collected from the app would not be shared outside the NHS. Matthew Gould, CEO of NHSX, the government department responsible for the app, said the data would be accessible to other organisations, but did not disclose which. Data collected would not necessarily be anonymised and would be held in a centralised repository. Over 150 of the UK's security and privacy experts warned the app's data could be used by 'a bad actor (state, private sector, or hacker)' to spy on citizens. Fears were discussed by the House of Commons' Human Rights Select Committee about plans for the app to record user location data. Parliament's Joint Committee on Human Rights said this version of the app should not be released without proper privacy protections. The second version of the app, released nationwide, addressed these concerns by employing a decentralised framework, the Apple/Google Exposure Notification system. Under this system, users remain pseudonymous: a person diagnosed with COVID-19 does not know which people are informed about an encounter, and contacted persons do not receive any information about the person diagnosed with COVID-19. The functionality of the app was also questioned in late April and early May 2020, as the software's use of Bluetooth required the app to be constantly running, meaning users could not use other apps or lock their device if the app was to function properly. The developers of the app were said to have found a way of working around this restriction. === Related contracts === Faculty – a company linked to Cambridge Analytica – provided research and modelling to NHSX in support of the response to the pandemic. Palantir, also linked to Cambridge Analytica, provided their data management platform. These contracts began in February and March respectively. == Second phase == As outlined on cancellation of the first app on 18 June 2020, the Department of Health and Social Care published on 30 July a brief description of the "next phase" app. Users would be able to scan a QR code at venues they visit, and later be notified if they had visited a place which was the source of a number of infections; the app would also assist with identifying symptoms and ordering a test. By using the Exposure Notification system from Apple and Google, personal data would be decentralised. Zuhlke Engineering Ltd, the UK branch of Swiss-based Zühlke Group, used 70 staff to complete the development of the app in 12 weeks. Zuhlke Engineering was awarded "Development Team of the Year" title at UK IT Industry awards in November 2021 for development of NHS COVID-19 application. === Timeline === Testing of the app by NHS volunteer responders, and selected residents of the Isle of Wight and the London Borough of Newham, began around 13 August. The app was made available to the public (aged 16 or over) in England and Wales on 24 September. An updated app released on 29 October, in part from collaboration with the Alan Turing Institute, improved the accuracy of measurements of the distance between the user's phone and other phones. At the same time, the duration threshold for determining exposure was reduced; this was expected to lead to an increase in the number of users told to self-isolate. An update to the app in April 2021, timed to coincide with easing of restrictions on hospitality businesses, was blocked by Apple and Google. It was intended that users who tested positive would be asked to share their history of visited venues, to assist in warning others, but this would have contravened assurances by Apple and Google that location data from devices would not be shared. === Statistics and effectiveness === The app was downloaded six million times on the first day it was generally availa

    Read more →
  • Centurion Guard

    Centurion Guard

    Centurion Guard is a PC hardware and software-based security product, developed by Centurion Technologies. It was first released in 1996. There were several different releases and versions of this product, and many were distributed in computers donated to libraries by the Bill & Melinda Gates Foundation. == Operating system compatibility == Microsoft Windows 7 Microsoft Windows Vista Microsoft Windows XP

    Read more →
  • Kdb+

    Kdb+

    kdb+ is a column-based relational time series database (TSDB) with in-memory (IMDB) abilities, developed and marketed by KX Systems. The database is commonly used in high-frequency trading (HFT) to store, analyze, process, and retrieve large data sets at high speed. kdb+ has the ability to handle billions of records and analyzes data within a database. The database is available in 32-bit and 64-bit versions for several operating systems. Financial institutions use kdb+ to analyze time series data such as stock or commodity exchange data. The database has also been used for other time-sensitive data applications including commodity markets such as energy trading, telecommunications, sensor data, log data, machine and computer network usage monitoring along with real time analytics in Formula One racing. == Overview == kdb+ is a high-performance column-store database that was designed to process and store large amounts of data. Commonly accessed data is pushed into random-access memory (RAM), which is faster to access than data in disk storage. Created with financial institutions in mind, the database was developed as a central repository to store time series data that supports real-time analysis of billions of records. kdb+ has the ability to analyze data over time and responds to queries similar to Structured Query Language (SQL). Columnar databases return answers to some queries in a more efficient way than row-based database management systems. kdb+ dictionaries, tables and nanosecond time stamps are native data types and are used to store time series data. At the core of kdb+ is the built-in programming language, q, a concise, expressive query array language, and dialect of the language APL. Q can manipulate streaming, real-time, and historical data. kdb+ uses q to aggregate and analyze data, perform statistical functions, and join data sets and supports SQL queries The vector language q was built for speed and expressiveness and eliminates most need for looping structures. kdb+ includes interfaces in C, C++, Java, C#, and Python. == History == In 1998, KX released kdb, a database built on the language K written by Arthur Whitney. In 2003, kdb+ was released as a 64-bit version of kdb. In 2004, the kdb+ tick market database framework was released along with kdb+ taq, a loader for the New York Stock Exchange (NYSE) taq data. kdb+ was created by Arthur Whitney, building on his prior work with array languages. In April 2007, KX announced that it was releasing a version of kdb+ for Mac OS X. Then, kdb+ was also available on the operating systems Linux, Windows, and Solaris. In September 2012, version 3.0 was released. It was optimized for Intel's upgraded processors with support for WebSockets, and universally unique identifiers (UUIDs, termed globally unique identifiers (GUID)s in Microsoft software). Intel's Advanced Vector Extensions (AVX) and Streaming SIMD Extensions 4 (SSE4) 4.2 on the Sandy Bridge processors of the time allowed for enhanced support of the kdb+ system. In June 2013, version 3.1 was released, with benchmarks up to 8 times faster than older versions. In March 2020, version 4.0 was released. New features included Multithreaded primitives, Intel Optane DC persistent memory support and Data at Rest Encryption.

    Read more →
  • Kruti

    Kruti

    Kruti is a multilingual AI agent and chatbot developed by the Indian company Ola Krutrim. It is designed to perform real-world tasks for users, such as booking taxis and ordering food, by integrating directly with various online services. It is notable for its ability to understand and respond in multiple Indian languages. Developed by a team founded by Bhavish Aggarwal, Kruti functions as an "agentic" AI, meaning it can reason, plan, and execute multi-step tasks to fulfill a user's request. The backend technology combines several open-source large language models with Ola's proprietary Krutrim V2 model. The system was developed to work primarily on smartphones, addressing the Indian market's specific needs, including language diversity and potential bandwidth constraints. Kruti was officially released in June 2025, replacing an earlier chatbot from the company that was also named Krutrim. Initially supporting 13 languages, the company plans to expand its capabilities to 22 Indian languages. == Background == Kruti is an improved version of Ola's Krutrim chatbot, which was first launched in 2023 and was intended to be replaced by Kruti. It was officially released on 12 June 2025 as an upgrade to passive chatbots, with support for text and voice in 13 Indian languages. As an agentic AI, it can execute tasks with customization and reasoning, providing adaptive answers based on user preferences and past interactions. Kruti is optimized for smartphone usage and designed to accommodate bandwidth constraints and usage patterns in India. To ensure scalability and cost-effective performance, it combines various open-source large language models with Ola's own Krutrim V2, which has 12 billion parameters. Its speech recognition is built to identify regional Indian languages, dialects, and accents. Due to its integration with numerous apps and services, Kruti is context-aware and can proactively complete tasks. Initially connected only with Ola ecosystem services, Krutrim intends to expand and incorporate various Indian services into Kruti, with the goal of adding services from Blinkit, Swiggy, and Uber with respective voice command support. On 20 June 2025, Krutrim acquired the AI platform BharatSah‘AI’yak to increase its involvement in government, education, and agriculture projects. This acquisition will allow Kruti to assist in broadening the scope of BharatSah'AI'yak's work on India-centric, vernacular retrieval-augmented generation AI bots. == Development == Kruti is designed to perform tasks with minimal user input, accepting documents, images, and text, without requiring users to switch between applications. Its agentic framework breaks queries into sub-tasks executed by multiple agents working sequentially or concurrently, with reported accuracy exceeding 90%. Kruti connects to company databases and APIs via the Model Context Protocol and presents responses as summaries, tables, or narratives adapted to user behaviour. The system supports payments via credit/debit cards and UPI. The underlying stack, which includes foundation models and AI training and inference systems, is intended to support adaptation across sectors such as healthcare, education, and finance. Ola Cabs and the Open Network for Digital Commerce have begun integrating Kruti into their platforms pending broader reliability testing.

    Read more →
  • MSpy

    MSpy

    mSpy is a brand of mobile and computer parental control monitoring software for iOS, Android, Windows, and macOS. The app monitors and logs user activity on the client device and sends the data to a personalized dashboard. Data the users can monitor includes text messages, calls, GPS locations, social media chats, and more. It is owned by Virtuoso Holding. == History == mSpy was launched as a product for mobile monitoring by Altercon Group in 2010. In 2012, the application allowed parents to monitor not only smartphones but also computers running Windows and macOS. In 2013, mSpy became TopTenReviews cell phone monitoring software award winner. By 2014, the business grew nearly 400%, and the app's user numbers exceeded 1 million. In 2015, mSpy received the Parents Tested Parents Approved (PTPA) Winner’s Seal of Approval in the United States. In 2015 and 2018, mSpy was the victim of data breaches which released user data. In 2016, mLite, a light version of mSpy, became available from Google Play. The same year, it was awarded the kidSAFE Certified Seal in the United States. In 2017, mSpy collaborated with YouTuber and journalist Coby Persin to conduct a social experiment on the dangers of social media and online predators. A social experiment, conducted with parental consent, involved Coby Persin to befriend three children—aged 12, 13, and 14—via Snapchat and then invite them to meet personally. Each of the participants agreed to the meeting and arrived at the designated location. The video of the experiment received widespread attention and helped to raise awareness about the importance of online security and parental controls. In early 2021, mSpy released a new feature - Screenrecorder. The feature allows parents to take screenshots of the kid's screen when they are browsing certain apps. In 2024, mSpy's Zendesk was compromised by an unknown threat actor, revealing their customer list. As of 2025, mSpy is compatible with Android, iPhone, and iPad devices. It provides access to various types of data stored on the device, including contact information, calendar entries, emails, SMS messages, browser history, photos, videos, and installed applications. Functions also include GPS tracking, geofencing, keyword alerts etc. == Reception == It was noted that since MSpy runs inconspicuously, there is risk of the software being used illegally. mSpy was called "terrifying" by The Next Web and was featured in NPR coverage of spyware used against victims of stalking and other domestic violence. In response mSpy released security updates aimed at reducing the risk of misuse and stated that it "uses encryption protocols to protect user data and that access is restricted to the account holder". In May 2015, Brian Krebs reported that mSpy was hacked, leaking personal data for hundreds of thousands of users of devices with mSpy installed. mSpy claimed that there was no data leak, but that instead, it was the victim of blackmailers. In September 2018, Krebs claimed and demonstrated that anyone could easily gain access to the mSpy database containing data for millions of users. The company responded by stating that the exposed data consisted primarily of error logs and incorrect login attempts. Following the incident, mSpy implemented new security measures, changed encryption keys, and reset passwords for affected accounts. A 2024 Sky News story characterised mSpy as "stalkerware". Leaked customer support messages from mSpy reveal misuse of its app for illegally monitoring partners and children.

    Read more →
  • Visual hull

    Visual hull

    A visual hull is a geometric entity created by shape-from-silhouette 3D reconstruction technique introduced by A. Laurentini. This technique assumes the foreground object in an image can be separated from the background. Under this assumption, the original image can be thresholded into a foreground/background binary image, which we call a silhouette image. The foreground mask, known as a silhouette, is the 2D projection of the corresponding 3D foreground object. Along with the camera viewing parameters, the silhouette defines a back-projected generalized cone that contains the actual object; this cone is called a silhouette cone. The intersection of the two silhouette cones defines a visual hull. which is a bounding geometry of the actual 3D object. When the reconstructed geometry is only used for rendering from a different viewpoint, the implicit reconstruction together with rendering can be done using graphics hardware. == In two dimensions == A technique used in some modern touchscreen devices employs cameras placed in the corners situated opposite infrared LEDs. The one-dimensional projection (shadow) of objects on the surface may be used to reconstruct the convex hull of the object. Visual hull generation method has also been used within experimental tele-meeting systems that aim to allow a user in a remote location to interact with virtual objects. The method uses multiple cameras to capture the real-world movements and interactions of the "sender", employing hardware-accelerated volumetric visual hull representation to create 3D volume from 2D multi-view images. Its ultimate aim is to allow 3D collaboration between the two users in the virtual realm, with the visual hull technique reducing the computational power required to allow this type of interaction and enabling the use of consumer goods such as the Wii Remote as a tool for interaction.

    Read more →
  • Graphics

    Graphics

    Graphics (from Ancient Greek γραφικός (graphikós) 'pertaining to drawing, painting, writing, etc.') are visual images or designs on some surface, such as a wall, canvas, screen, paper, or stone, to inform, illustrate, or entertain. In contemporary usage, it includes a pictorial representation of data, as in design and manufacture, in typesetting and the graphic arts, and in educational and recreational software. Images that are generated by a computer are called computer graphics. Examples are photographs, drawings, line art, mathematical graphs, line graphs, charts, diagrams, typography, numbers, symbols, geometric designs, maps, engineering drawings, or other images. Graphics often combine text, illustration, and color. Graphic design may consist of the deliberate selection, creation, or arrangement of typography alone, as in a brochure, flyer, poster, web site, or book without any other element. The objective can be clarity or effective communication, association with other cultural elements, or merely the creation of a distinctive style. Graphics can be functional or artistic. The latter can be a recorded version, such as a photograph, or an interpretation by a scientist to highlight essential features, or an artist, in which case the distinction with imaginary graphics may become blurred. It can also be used for architecture. == History == The earliest graphics known to anthropologists studying prehistoric periods are cave paintings and markings on boulders, bone, ivory, and antlers, which were created during the Upper Palaeolithic period from 40,000 to 10,000 B.C. or earlier. Many of these were found to record astronomical, seasonal, and chronological details. Some of the earliest graphics and drawings are known to the modern world, from almost 6,000 years ago, are that of engraved stone tablets and ceramic cylinder seals, marking the beginning of the historical periods and the keeping of records for accounting and inventory purposes. Records from Egypt predate these and papyrus was used by the Egyptians as a material on which to plan the building of pyramids; they also used slabs of limestone and wood. From 600 to 250 BC, the Greeks played a major role in geometry. They used graphics to represent their mathematical theories such as the Circle Theorem and the Pythagorean theorem. In art, "graphics" is often used to distinguish work in a monotone and made up of lines, as opposed to painting. === Drawing === Drawing generally involves making marks on a surface by applying pressure from a tool or moving a tool across a surface. In which a tool is always used as if there were no tools it would be art. Graphical drawing is an instrumental guided drawing. === Printmaking === Woodblock printing, including images is first seen in China after paper was invented (about A.D. 105). In the West, the main techniques have been woodcut, engraving and etching, but there are many others. ==== Etching ==== Etching is an intaglio method of printmaking in which the image is incised into the surface of a metal plate using an acid. The acid eats the metal, leaving behind roughened areas, or, if the surface exposed to the acid is very thin, burning a line into the plate. The use of the process in printmaking is believed to have been invented by Daniel Hopfer (c. 1470–1536) of Augsburg, Germany, who decorated armour in this way. Etching is also used in the manufacturing of printed circuit boards and semiconductor devices. === Line art === Line art is a rather non-specific term sometimes used for any image that consists of distinct straight and curved lines placed against a (usually plain) background, without gradations in shade (darkness) or hue (color) to represent two-dimensional or three-dimensional objects. Line art is usually monochromatic, although lines may be of different colors. === Illustration === An illustration is a visual representation such as a drawing, painting, photograph or other work of art that stresses the subject more than form. The aim of an illustration is to elucidate or decorate a story, poem or piece of textual information (such as a newspaper article), traditionally by providing a visual representation of something described in the text. The editorial cartoon, also known as a political cartoon, is an illustration containing a political or social message. Illustrations can be used to display a wide range of subject matter and serve a variety of functions, such as: giving faces to characters in a story displaying a number of examples of an item described in an academic textbook (e.g. A Typology) visualizing step-wise sets of instructions in a technical manual communicating subtle thematic tone in a narrative linking brands to the ideas of human expression, individuality, and creativity making a reader laugh or smile for fun (to make laugh) funny === Graphs === A graph or chart is a graphic that represents tabular or numeric data. Charts are often used to make it easier to understand large quantities of data and the relationships between different parts of the data. === Diagrams === A diagram is a simplified and structured visual representation of concepts, ideas, constructions, relations, statistical data, etc., used to visualize and clarify the topic. === Symbols === A symbol, in its basic sense, is a representation of a concept or quantity; i.e., an idea, object, concept, quality, etc. In more psychological and philosophical terms, all concepts are symbolic in nature, and representations for these concepts are simply token artifacts that are allegorical to (but do not directly codify) a symbolic meaning, or symbolism. === Maps === A map is a simplified depiction of a space, a navigational aid which highlights relations between objects within that space. Usually, a map is a two-dimensional, geometrically accurate representation of a three-dimensional space. One of the first 'modern' maps was made by Waldseemüller. === Photography === One difference between photography and other forms of graphics is that a photographer, in principle, just records a single moment in reality, with seemingly no interpretation. However, a photographer can choose the field of view and angle, and may also use other techniques, such as various lenses to choose the view or filters to change the colors. In recent times, digital photography has opened the way to an infinite number of fast, but strong, manipulations. Even in the early days of photography, there was controversy over photographs of enacted scenes that were presented as 'real life' (especially in war photography, where it can be very difficult to record the original events). Shifting the viewer's eyes ever so slightly with simple pinpricks in the negative could have a dramatic effect. The choice of the field of view can have a strong effect, effectively 'censoring out' other parts of the scene, accomplished by cropping them out or simply not including them in the photograph. This even touches on the philosophical question of what reality is. The human brain processes information based on previous experience, making us see what we want to see or what we were taught to see. Photography does the same, although the photographer interprets the scene for their viewer. === Engineering drawings === An engineering drawing is a type of drawing and is technical in nature, used to fully and clearly define requirements for engineered items. It is usually created in accordance with standardized conventions for layout, nomenclature, interpretation, appearance (such as typefaces and line styles), size, etc. === Computer graphics === There are two types of computer graphics: raster graphics, where each pixel is separately defined (as in a digital photograph), and vector graphics, where mathematical formulas are used to draw lines and shapes, which are then interpreted at the viewer's end to produce the graphic. Using vectors results in infinitely sharp graphics and often smaller files, but, when complex, like vectors take time to render and may have larger file sizes than a raster equivalent. In 1950, the first computer-driven display was attached to MIT's Whirlwind I computer to generate simple pictures. This was followed by MIT's TX-0 and TX-2, interactive computing which increased interest in computer graphics during the late 1950s. In 1962, Ivan Sutherland invented Sketchpad, an innovative program that influenced alternative forms of interaction with computers. In the mid-1960s, large computer graphics research projects were begun at MIT, General Motors, Bell Labs, and Lockheed Corporation. Douglas T. Ross of MIT developed an advanced compiler language for graphics programming. S.A.Coons, also at MIT, and J. C. Ferguson at Boeing, began work in sculptured surfaces. GM developed their DAC-1 system, and other companies, such as Douglas, Lockheed, and McDonnell, also made significant developments. In 1968, ray tracing was first described by Arthur Appel of the IBM Research Center, Yorktown Heights, N

    Read more →
  • Necrobotics

    Necrobotics

    Necrobotics is the practice of using biotic materials (or dead organisms) as robotic components. Necrobotics can serve as an alternative to mechanical components that are difficult to manufacture by using biological components designed by natural selection in order to exploit the highly developed selective design implemented in biological lifeforms via the process of evolution. In July 2022, researchers in the Preston Innovation Lab at Rice University in Houston, Texas published a paper in Advanced Science introducing the concept and demonstrating its capability by repurposing dead spiders as robotic grippers and applying pressurized air to activate their gripping arms. In April 2025 researchers at Shinshu University created a “bio-hybrid drone” using silk-worm moth antennae to detect the source of a smell. In November 2025 researchers at McGill University demonstrated the use of a mosquito proboscis as a fine nozzle in experimental 3D printing. Necrobotics utilizes the spider's organic hydraulic system and their compact legs to create an efficient and simple gripper system. The necrobotic spider gripper is capable of lifting small and light objects, thereby serving as an alternative to complex and costly small mechanical grippers. == Background == The main appeal of the spider's body in necrobotics is its compact leg mechanism and use of hydraulic pressure. The spider's anatomy utilizes a simple hydraulic (fluid) pressure system. Spider legs have flexor muscles that naturally constrict their legs when relaxed. A force is required to straighten and extend their legs, which spiders accomplish by pumping hemolymph fluid (blood) through their joints as a means of hydraulic pressure. It takes no external power to curl their legs due to their flexor muscles' natural curled state. In July 2022, researchers in the Preston Innovation Lab at Rice University published a paper detailing their experiments with the gripper. Although dead spiders no longer produce hemolymph, Te Faye Yap (lead author and mechanical engineering graduate) found that pumping air through a needle into the spider's cephalothorax (main body) accomplishes the same results as hemolymph. The original hydraulic (fluid) system is essentially converted into a pneumatic (air) system. == Fabrication == Obtain a spider Euthanize the spider using a cold temperature of around -4°C for 5-7 days Insert a 25 gauge hypodermic needle into the spider's cephalothorax (main body) Apply glue around the needle to form a seal and allow it to dry Connect a syringe or pump to the needle Extend the spider's legs by pumping air in == Testing and Data == === Internal Force Versus Gripping Force === The typical pressure in a resting spider's legs ranges from 4 kPa to 6.1 kPa. Researchers extended the legs by increasing the spider's internal pressure to 5.5 kPa. Pumping air into the body increases the internal pressure, causing the legs to expand. Pumping air out of the body decreases internal pressure, causing the legs to contract due to their flexor leg muscles. When the internal pressure decreases to 0 kPa, the gripper would be fully closed, allowing for the gripper to grasp objects. This action demonstrates that as internal pressure decreases, the gripping force increases. Inversely, when internal pressure increases, the gripping force decreases. By gripping individual weighted acetate beads, it is found that the necrobotic gripper achieves a maximum gripping force of 0.35 milinewtons. === Spider Weight Versus Gripping Force === To estimate the gripping forces of smaller and larger spiders, researchers created a plot to predict the gripping force relative to the size of the spider. The wolf spider's body weight is relatively equal to the gripping force of its legs. The mass of the gripper is 33.5 mg and can lift 1.3 times its body weight (43.6 mg or 0.35 mN). However, with larger spiders, the gripping force relative to body weight decreases. For example, a 200-gram goliath birdeater is predicted to lift 10% of its weight (20 grams or 196 mN). Though there is an inverse relationship between spider mass and gripping force, larger spiders exert greater gripping forces than smaller spiders. === Gripper Lifespan === The necrobotic gripper's functionality is entirely reliant on the structural integrity of the spider. If the spider were to break down easily and frequently, the gripper would not be practical. Using cyclic testing, a series of repeated actions, it is found that the necrobotic gripper can actuate 700 to 1000 times. After 1000 cycles, cracks begin forming on the membrane of the leg joints due to dehydration. Weakened and decomposing joints lead to frequent breakage and replacement, thereby serving as an obstacle in applying necrobotics to real-world scenarios. One theorized fix to this issue is applying beeswax or a lubricant to the joints. Researchers found that over 10 days, the mass of an uncoated spider decreased 17 times more than the mass of a spider coated with beeswax. Lubricating joints combats dehydration and slows the loss of organic material. == Constraints == With the usage of organic material, there is a higher chance of the component decomposing and breaking down as opposed to traditional mechanical systems. There may be additional work and management required to replace these grippers if they fail. Additionally, organic inconsistencies with the spiders will yield inaccurate results. Not all wolf spiders develop the same, so gripping force and leg contraction can vary between grippers. There are moral implications behind euthanizing spiders for robotics. The ethical boundaries that necrobotics push in the pursuit of biohybrid systems raise concerns, as opponents say it may lead to the hybridization of mammals and is intrusive to nature. Proponents respond that repurposing dead animals has been human practice for millennia and that necrobotics should be pursued to advance science.

    Read more →
  • Data access layer

    Data access layer

    A data access layer (DAL) is a software architectural layer that provides access to data from one or more sources, such as a relational database, NoSQL database, SQL query engine, file system, or other persistent storage. It separates client code from the details of storage systems, query execution, connection handling, and data retrieval. Data access layers are commonly used to centralize data access logic, reduce coupling between applications and data sources, and provide a consistent interface for retrieving, writing, or querying data. Depending on the system, a data access layer may be implemented as application code, a shared library, an intermediary service, or part of a broader database abstraction layer. == In application architecture == In application software, a data access layer provides a boundary between business logic or application code and the systems used to store or retrieve data. For example, a data access layer may expose methods or interfaces for retrieving, writing, or querying data while hiding details such as connection management, SQL statements, storage APIs, error handling, and result conversion. Depending on the application, the layer may return objects, records, tabular results, documents, streams, or other representations of data. A common implementation is a set of classes, functions, or methods that directly reference database queries, stored procedures, storage APIs, or other data sources. For example, instead of using commands such as insert, delete, and update throughout an application to access a specific table, methods such as registerUser or loginUser may be implemented inside the data access layer. Business logic methods from an application can also be mapped to the data access layer. Instead of making several database queries directly, an application can call a single DAL method that abstracts those database calls. Applications using a data access layer may be either dependent on or independent from a particular database server. If the data access layer supports multiple database systems, the application can use any database system that the DAL can access. In either case, the data access layer provides a centralized location for calls into the underlying data store, which can make it easier to maintain, test, or port the application to other storage systems. == Implementation patterns == A data access layer can be implemented using several patterns and technologies, including data access objects, repositories, stored procedures, query builders, database drivers, or object–relational mapping tools. These mechanisms may implement part or all of a data access layer, but are not always equivalent to the layer itself. Object–relational mapping tools are commonly used in data access layers for object-oriented applications that map records in a relational database to objects in a programming language. Other data access layers may expose lower-level database interfaces, tabular results, document-oriented data, files, streams, or protocol-level interfaces. == Use with multiple underlying data systems == A data access layer may be used to abstract differences between multiple underlying data systems, allowing applications to access them through a more consistent interface. In such designs, applications call the DAL rather than interacting directly with each database or storage system. The layer may then handle connection management, query generation, result mapping, error handling, and other implementation details. A data access layer may be implemented as a shared library or as an intermediary service, such as a proxy or gateway. In this configuration, client applications or services connect to the data access layer, which then communicates with one or more underlying databases or query engines. This can provide a common location for authentication, authorization, logging, routing, and translation between different database interfaces. == Interfaces and protocols == Data access layers may expose or use standardized interfaces and protocols for database access. Examples include Open Database Connectivity (ODBC), Java Database Connectivity (JDBC), database-native wire protocols, and newer interfaces such as Apache Arrow Database Connectivity (ADBC) and Arrow Flight SQL. In systems that support multiple data stores, a data access layer may provide a consistent interface while using different drivers, protocols, or query mechanisms internally. == Distinction from related patterns == A data access layer is related to, but broader than, a data access object, which is usually an object-oriented design pattern for encapsulating access to a persistence mechanism. It is also related to a database abstraction layer, which focuses on hiding differences between database systems. In practice, the terms may overlap.

    Read more →
  • Commitment ordering

    Commitment ordering

    Commitment ordering (CO) is a class of interoperable serializability techniques in concurrency control of databases, transaction processing, and related applications. It allows optimistic (non-blocking) implementations. With the proliferation of multi-core processors, CO has also been increasingly utilized in concurrent programming, transactional memory, and software transactional memory (STM) to achieve serializability optimistically. CO is also the name of the resulting transaction schedule (history) property, defined in 1988 with the name dynamic atomicity. In a CO compliant schedule, the chronological order of commitment events of transactions is compatible with the precedence order of the respective transactions. CO is a broad special case of conflict serializability and effective means (reliable, high-performance, distributed, and scalable) to achieve global serializability (modular serializability) across any collection of database systems that possibly use different concurrency control mechanisms (CO also makes each system serializability compliant, if not already). Each not-CO-compliant database system is augmented with a CO component (the commitment order coordinator—COCO) which orders the commitment events for CO compliance, with neither data-access nor any other transaction operation interference. As such, CO provides a low overhead, general solution for global serializability (and distributed serializability), instrumental for global concurrency control (and distributed concurrency control) of multi-database systems and other transactional objects, possibly highly distributed (e.g., within cloud computing, grid computing, and networks of smartphones). An atomic commitment protocol (ACP; of any type) is a fundamental part of the solution, utilized to break global cycles in the conflict (precedence, serializability) graph. CO is the most general property (a necessary condition) that guarantees global serializability, if the database systems involved do not share concurrency control information beyond atomic commitment protocol (unmodified) messages and have no knowledge of whether transactions are global or local (the database systems are autonomous). Thus CO (with its variants) is the only general technique that does not require the typically costly distribution of local concurrency control information (e.g., local precedence relations, locks, timestamps, or tickets). It generalizes the popular strong strict two-phase locking (SS2PL) property, which in conjunction with the two-phase commit protocol (2PC), is the de facto standard to achieve global serializability across (SS2PL based) database systems. As a result, CO compliant database systems (with any different concurrency control types) can transparently join such SS2PL based solutions for global serializability. In addition, locking based global deadlocks are resolved automatically in a CO based multi-database environment, a vital side-benefit (including the special case of a completely SS2PL based environment; a previously unnoticed fact for SS2PL). Furthermore, strict commitment ordering (SCO; Raz 1991c), the intersection of Strictness and CO, provides better performance (shorter average transaction completion time and resulting in better transaction throughput) than SS2PL whenever read-write conflicts are present (identical blocking behavior for write-read and write-write conflicts; comparable locking overhead). The advantage of SCO is especially during lock contention. Strictness allows both SS2PL and SCO to use the same effective database recovery mechanisms. Two major generalizing variants of CO exist, extended CO (ECO; Raz 1993a) and multi-version CO (MVCO; Raz 1993b). They also provide global serializability without local concurrency control information distribution, can be combined with any relevant concurrency control, and allow optimistic (non-blocking) implementations. Both use additional information for relaxing CO constraints and achieving better concurrency and performance. Vote ordering (VO or Generalized CO (GCO); Raz 2009) is a container schedule set (property) and technique for CO and all its variants. Local VO is necessary for guaranteeing global serializability if the atomic commitment protocol (ACP) participants do not share concurrency control information (have the generalized autonomy property). CO and its variants inter-operate transparently, guaranteeing global serializability and automatic global deadlock resolution together in a mixed, heterogeneous environment with different variants. == Overview == The Commitment ordering (CO; Raz 1990, 1992, 1994, 2009) schedule property has been referred to also as Dynamic atomicity (since 1988), commit ordering, commit order serializability, and strong recoverability (since 1991). The latter is a misleading name since CO is incomparable with recoverability, and the term "strong" implies a special case. This means that a substantial recoverability property does not necessarily have the CO property and vice versa. In 2009 CO has been characterized as a major concurrency control method, together with the previously known (since the 1980s) three major methods: Locking, Time-stamp ordering, and Serialization graph testing, and as an enabler for the interoperability of systems using different concurrency control mechanisms. In a federated database system or any other more loosely defined multidatabase system, which are typically distributed in a communication network, transactions span multiple and possibly Distributed databases. Enforcing global serializability in such system is problematic. Even if every local schedule of a single database is still serializable, the global schedule of a whole system is not necessarily serializable. The massive communication exchanges of conflict information needed between databases to reach conflict serializability would lead to unacceptable performance, primarily due to computer and communication latency. The problem of achieving global serializability effectively had been characterized as open until the public disclosure of CO in 1991 by its inventor Yoav Raz (Raz 1991a; see also Global serializability). Enforcing CO is an effective way to enforce conflict serializability globally in a distributed system since enforcing CO locally in each database (or other transactional objects) also enforces it globally. Each database may use any, possibly different, type of concurrency control mechanism. With a local mechanism that already provides conflict serializability, enforcing CO locally does not cause any other aborts, since enforcing CO locally does not affect the data access scheduling strategy of the mechanism (this scheduling determines the serializability related aborts; such a mechanism typically does not consider the commitment events or their order). The CO solution requires no communication overhead since it uses (unmodified) atomic commitment protocol messages only, already needed by each distributed transaction to reach atomicity. An atomic commitment protocol plays a central role in the distributed CO algorithm, which enforces CO globally by breaking global cycles (cycles that span two or more databases) in the global conflict graph. CO, its special cases, and its generalizations are interoperable and achieve global serializability while transparently being utilized together in a single heterogeneous distributed environment comprising objects with possibly different concurrency control mechanisms. As such, Commitment ordering, including its special cases, and together with its generalizations (see CO variants below), provides a general, high performance, fully distributed solution (no central processing component or central data structure are needed) for guaranteeing global serializability in heterogeneous environments of multidatabase systems and other multiple transactional objects (objects with states accessed and modified only by transactions; e.g., in the framework of transactional processes, and within Cloud computing and Grid computing). The CO solution scales up with network size and the number of databases without any negative impact on performance (assuming the statistics of a single distributed transaction, e.g., the average number of databases involved with a single transaction, are unchanged). With the proliferation of Multi-core processors, Optimistic CO (OCO) has also been increasingly utilized to achieve serializability in software transactional memory, and numerous STM articles and patents utilizing "commit order" have already been published (e.g., Zhang et al. 2006). == The commitment ordering solution for global serializability == === General characterization of CO === Commitment ordering (CO) is a special case of conflict serializability. CO can be enforced with non-blocking mechanisms (each transaction can complete its task without having its data-access blocked, which allows optimistic concurrency control; however, commitment could be blo

    Read more →
  • Clipping (computer graphics)

    Clipping (computer graphics)

    Clipping, in the context of computer graphics, is a method to selectively enable or disable rendering operations within a defined region of interest. Mathematically, clipping can be described using the terminology of constructive geometry. A rendering algorithm only draws pixels in the intersection between the clip region and the scene model. Lines and surfaces outside the view volume (aka. frustum) are removed. Clip regions are commonly specified to improve render performance. Pixels that will be drawn are said to be within the clip region. Pixels that will not be drawn are outside the clip region. More informally, pixels that will not be drawn are said to be "clipped." == In 2D graphics == In two-dimensional graphics, a clip region may be defined so that pixels are only drawn within the boundaries of a window or frame. Clip regions can also be used to selectively control pixel rendering for aesthetic or artistic purposes. In many implementations, the final clip region is the composite (or intersection) of one or more application-defined shapes, as well as any system hardware constraints In one example application, consider an image editing program. A user application may render the image into a viewport. As the user zooms and scrolls to view a smaller portion of the image, the application can set a clip boundary so that pixels outside the viewport are not rendered. In addition, GUI widgets, overlays, and other windows or frames may obscure some pixels from the original image. In this sense, the clip region is the composite of the application-defined "user clip" and the "device clip" enforced by the system's software and hardware implementation. Application software can take advantage of this clip information to save computation time, energy, and memory, avoiding work related to pixels that aren't visible. == In 3D graphics == In three-dimensional graphics, the terminology of clipping can be used to describe many related features. Typically, "clipping" refers to operations in the plane that work with rectangular shapes, and "culling" refers to more general methods to selectively process scene model elements. This terminology is not rigid, and exact usage varies among many sources. Scene model elements include geometric primitives: points or vertices; line segments or edges; polygons or faces; and more abstract model objects such as curves, splines, surfaces, and even text. In complicated scene models, individual elements may be selectively disabled (clipped) for reasons including visibility within the viewport (frustum culling); orientation (backface culling), obscuration by other scene or model elements (occlusion culling, depth- or "z" clipping). Sophisticated algorithms exist to efficiently detect and perform such clipping. Many optimized clipping methods rely on specific hardware acceleration logic provided by a graphics processing unit (GPU). The concept of clipping can be extended to higher dimensionality using methods of abstract algebraic geometry. === Near clipping === Beyond projection of vertices & 2D clipping, near clipping is required to correctly rasterise 3D primitives; this is because vertices may have been projected behind the eye. Near clipping ensures that all the vertices used have valid 2D coordinates. Together with far-clipping it also helps prevent overflow of depth-buffer values. Some early texture mapping hardware (using forward texture mapping) in video games suffered from complications associated with near clipping and UV coordinates. === Occlusion clipping (Z- or depth clipping) === In 3D computer graphics, "Z" often refers to the depth axis in the system of coordinates centered at the viewport origin: "Z" is used interchangeably with "depth", and conceptually corresponds to the distance "into the virtual screen." In this coordinate system, "X" and "Y" therefore refer to a conventional cartesian coordinate system laid out on the user's screen or viewport. This viewport is defined by the geometry of the viewing frustum, and parameterizes the field of view. Z-clipping, or depth clipping, refers to techniques that selectively render certain scene objects based on their depth relative to the screen. Most graphics toolkits allow the programmer to specify a "near" and "far" clip depth, and only portions of objects between those two planes are displayed. A creative application programmer can use this method to render visualizations of the interior of a 3D object in the scene. For example, a medical imaging application could use this technique to render the organs inside a human body. A video game programmer can use clipping information to accelerate game logic. For example, a tall wall or building that occludes other game entities can save GPU time that would otherwise be spent transforming and texturing items in the rear areas of the scene; and a tightly integrated software program can use this same information to save CPU time by optimizing out game logic for objects that aren't seen by the player. == Algorithms == Line clipping algorithms: Cohen–Sutherland Liang–Barsky Fast-clipping Cyrus–Beck Nicholl–Lee–Nicholl Skala O(lg N) algorithm Polygon clipping algorithms: Greiner–Hormann Sutherland–Hodgman Weiler–Atherton Vatti Rendering methodologies Painter's algorithm

    Read more →
  • Stochastic parrot

    Stochastic parrot

    In machine learning, the term stochastic parrot is a metaphor that frames large language models as systems that statistically mimic text without real understanding. The word "stochastic" – from the ancient Greek "στοχαστικός" (stokhastikos, 'based on guesswork') – is a term from probability theory meaning "randomly determined". The word "parrot" refers to parrots' ability to mimic human speech. The term was introduced in a 2021 paper on AI ethics titled "On the Dangers of Stochastic Parrots: Can Language Models Be Too Big? 🦜" and authored by Timnit Gebru, Emily M. Bender, Angelina McMillan-Major, and Margaret Mitchell. The paper outlined possible risks associated with large language models (LLMs). In December 2020, it was the subject of a workplace dispute between Gebru (then co-leader of Google's Ethical Artificial Intelligence Team) and Google, which had requested the retraction of the paper. The incident culminated in Gebru's controversial departure from the company. The paper was later presented at the 2021 ACM Conference, and the term "stochastic parrot" has seen widespread use in academic research concerning generative AI and LLMs. The term has been interpreted negatively as an insult towards AI. == Background == Timnit Gebru is an AI ethics researcher, Emily M. Bender is a linguist specializing in computational linguistics, and Margaret Mitchell is a computer scientist specializing in algorithmic bias. Gebru had joined Google in 2018, where she co-led a team on the ethics of artificial intelligence with Mitchell. In late 2020, the paper "On the Dangers of Stochastic Parrots: Can Language Models Be Too Big? 🦜" was co-written by Gebru and five other researchers, four of whom were Google employees. The paper argues that large language models (LLMs) present significant risks such as environmental and financial costs, inscrutability leading to unknown dangerous biases, and potential for deception as LLMs do not understand the concepts underlying what they learn. The paper states that LLMs are "stitching together sequences of linguistic forms ... observed in its vast training data, according to probabilistic information about how they combine, but without any reference to meaning." Therefore, they are labeled "stochastic parrots". === Dismissal of Gebru by Google === After the paper was submitted for consideration to the 2021 ACM Conference, Google requested that Gebru either retract the paper from the conference or remove the names of Google employees from it. Gebru refused to do so without further discussion, and emailed Google Research vice president Megan Kacholia that if the company could not explain the request for retraction and address other concerns regarding similar projects, she would plan to resign after a transition period, stating that they could "work on a last date". The following day, on December 2, 2020, Gebru received an email saying that Google was "accepting her resignation". Her abrupt firing sparked protests by Google employees and negative publicity for the company. == Usage == The phrase has been used by AI skeptics to signify that LLMs lack understanding of the meaning of their outputs. Sam Altman, CEO of OpenAI, used the term shortly after the release of ChatGPT in December 2022, tweeting "i am a stochastic parrot, and so r u". The term was nominated as the 2023 AI-related Word of the Year by the American Dialect Society. == Debate == Some LLMs, such as ChatGPT, have become capable of interacting with users in convincingly human-like conversations. The development of these new systems has deepened the discussion of the extent to which LLMs understand or are simply "parroting". According to machine learning researchers Lindholm, Wahlström, Lindsten, and Schön, the term "stochastic parrot" highlights two vital limitations of LLMs: LLMs are limited by the data they are trained on and are simply stochastically repeating contents of datasets. Because they are just making up outputs based on training data, LLMs do not understand if they are saying something incorrect or inappropriate. Lindholm et al. noted that, with poor quality datasets and other limitations, a learning machine might produce results that are "dangerously wrong". === Subjective experience === In the mind of a human being, words and language correspond to things one has experienced. For LLMs, according to proponents of the theory, words correspond only to other words and patterns of usage fed into their training data. Proponents of the idea of stochastic parrots thus conclude that statements about LLMs are due to "the human tendency to attribute meaning to text", and claim this occurs despite the LLMs not actually understanding language. === Fine-tuning === Kelsey Piper argued that the claim that LLMs are stochastic parrots or mere "next-token predictors" focuses on pre-training, ignoring that modern LLMs are also fine-tuned to follow instructions and to prefer accurate answers. === Hallucinations and mistakes === The tendency of LLMs to pass off false information as fact is held as support. Called hallucinations or confabulations, LLMs will occasionally synthesize information that matches some pattern. LLMs may fail to distinguish fact and fiction, which leads to the claim that they can't connect words to a comprehension of the world, as humans do. Furthermore, LLMs may fail to decipher complex or ambiguous grammar cases that rely on understanding the meaning of language. For example: The wet newspaper that fell down off the table is my favorite newspaper. But now that my favorite newspaper fired the editor I might not like reading it anymore. Can I replace 'my favorite newspaper' by 'the wet newspaper that fell down off the table' in the second sentence? GPT-4, an LLM released in March 2023, responded yes, not understanding that the meaning of "newspaper" is different in these two contexts; it is first an object and second an institution. === Benchmarks and experiments === One argument against the hypothesis that LLMs are stochastic parrot is their results on benchmarks for reasoning, common sense and language understanding. In 2023, some LLMs have shown good results on many language understanding tests, such as the Super General Language Understanding Evaluation (SuperGLUE). GPT-4 scored in the >90th-percentile on the Uniform Bar Examination and achieved 93% accuracy on the MATH benchmark of high-school Olympiad problems, results that exceed rote pattern-matching expectations. Such tests, and the smoothness of many LLM responses, help as many as 51% of AI professionals believe they can truly understand language with enough data, according to a 2022 survey. === Expert rebuttals === Some AI researchers dispute the notion that LLMs merely "parrot" their training data. Geoffrey Hinton, a pioneering figure in neural networks, counters that the metaphor misunderstands the prerequisite for accurate language prediction. He argues that "to predict the next word accurately, you have to understand the sentence", a view he presented on 60 Minutes in 2023. From this perspective, understanding is not an alternative to statistical prediction, but rather an emergent property required to perform it effectively at scale. Hinton also uses logical puzzles to demonstrate that LLMs actually understand language. A 2024 Scientific American investigation described a closed Berkeley workshop where state-of-the-art models solved novel tier-4 mathematics problems and produced coherent proofs, indicating reasoning abilities beyond memorization. The GPT-4 Technical Report showed human-level results on professional and academic exams (e.g., the Uniform Bar Exam and USMLE), challenging the "parrot" characterization. Anthropic conducted mechanistic interpretability research on Claude, using attribution graphs to identify circuits. The research showed how the LLM processes information via chains of fuzzy logical inference, and indicated an ability to plan ahead. They found that Claude 3.5 Haiku "employs remarkably general abstractions", forms "internally generated plans for its future outputs" and "works backwards from its longer-term goals". They noted that "The mechanisms of the model can apparently only be faithfully described using an overwhelmingly large causal graph." They also found that the model includes "mechanisms that could underlie a simple form of metacognition", in that it "thinks about" the level of its own knowledge before reaching its answer. === Interpretability === Another line of evidence against the 'stochastic parrot' claim comes from mechanistic interpretability, a research field dedicated to reverse-engineering LLMs to understand their internal workings. Rather than only observing the model's input-output behavior, these techniques probe the model's internal activations, which can be used to determine if they contain structured representations of the world. The goal is to investigate whether LLMs are merely manipulating surface statistics or if t

    Read more →
  • Unfold (app)

    Unfold (app)

    Unfold is a mobile application that allows users to create social media content using a variety of templates and other tools. It was founded in 2018 by Alfonso Cobo and Andy McCune. It enables users to add photos, video, and text with a variety of tools. In 2019, Unfold was acquired by Squarespace. == History == In January 2017, Alfonso Cobo was studying at Parsons School of Design when he realized there was no software or app that could create a portfolio of his work on an iPad. Cobo created an app called Portfolio, a basic version of a portfolio layout app, and the first one to exist for iPad. He launched it in 2017. After launching the first version of Portfolio, Cobo realized the more popular market and use case was on mobile. Around that time, Instagram was launching Stories. As a result, Cobo pivoted the app away from portfolios and instead focused on an app to showcase one's stories. Cobo later contacted Andy McCune, founder of social media account Earth, to collaborate with Unfold. Unfold also partnered with various companies to create custom templates. These include Equinox, Tommy Hilfiger, NARS, Billboard Music Awards, and Product Red. Unfold also launched a collection of Product Red templates to help eliminate HIV/AIDS in several African countries. In 2019, Squarespace acquired Unfold. The Unfold app has been downloaded over 60 million times and has been used to create over 1 billion Instagram stories. == Features == With Unfold, users can utilize hundreds of templates to make social content for social media platforms such as Instagram, Snapchat, and Facebook. The free app offers users basic templates and standard fonts, filters, and stickers, and there are also premium templates available for a monthly subscription. With Unfold+ and Unfold Pro (previously Unfold for Brands), users can access premium templates and tools, as well as upload custom brand assets and fonts. In 2020, Unfold launched Bio Sites, which allows users to link to multiple sites and platforms.

    Read more →
  • EPUAP

    EPUAP

    ePUAP (Electronic Platform of Public Administration Services) is a Polish nationwide platform for communication of citizens with public administrations in a uniform and standardized way. Built as part of the ePUAP-WKP project (State Informatization Plan). Service providers are public administration units and public institutions (especially entities that perform tasks commissioned by the state). The platform provides service providers with technological infrastructure to provide services to citizens (recipients). Among the participants of ePUAP there are both central administration units and local governments, including municipal offices. Among the services offered by ePUAP is also Profil Zaufany (Trusted Profile), which enables electronic filing with legal effect without the need to use a qualified signature and SAML-based single sign-on mechanism, which enables the same ePUAP account to log on to websites of various service providers. The website www.epuap.gov.pl enables defining citizen and businesses service processes, creates channels of access to different systems of public administration and extends the package of public services provided electronically. Services available through the ePUAP platform may be accessed at the official website. Currently all administration services are available in Polish only. == Overview == It is described by the Polish government as "a coherent and systematic action program designed and developed to allow public institutions make their electronic services available to the public". The platform provides citizens, businesses and institutions with a number of services intended to ensure smooth and safe communication between: customer to administrations (C2A), business to administration (B2A), administration to administration (A2A). === Main goals === The main project objectives are to create a single, secure and electronic access channel to public services for citizens, businesses and public administration and also to reduce time and lower the costs of sharing information resources and functionalities of administration domain systems. Within the project, the following functionalities and services were delivered: Public services catalogue – a method of presenting and describing administration services, ePUAP platform – a web platform designed to provide public services on the Internet, Interoperability portal – a portal for experts working on recommendations for electronic documents and forms used within Polish administration systems to assure the uniformity of IT standards, Central Repository of Electronic Document Models – a database for valid document models and electronic forms. == History and background == The ePUAP project was carried out in the years 2005–2008. Currently, a continuation project ePUAP2 is being carried out with the following objectives: to increase the number of online services available to the public including the registry services, to widen the scale of usage of public electronic services, to integrate subsequent systems of public administration and business on ePUAP portal, to define new processes of customer and business services. === ePUAP2 === ePUAP2 is a public and administrative project that extends the set of functional services developed during the first edition of the project and is another step in the process of transforming Poland into a modern and citizen-friendly country. The implementation period for the project covers the years 2009–2013. Project financing The cost of the project “Construction of electronic Platform of Public Administration Services” – 32 million PLN was covered in 75% by the funds from the European Regional Development Fund (under the Sector Operational Programme "Supporting Competitiveness of Enterprises for the years 2004–2006"), while the remaining 25% of the cost was covered by a Polish national co-financing. Funds for the ePUAP2 project were gained from the 7th priority axis of the Innovative Economy Operational Programme and amounts to 140 million PLN (85% of eligible expenses were covered by the European Regional Development Fund, 15% were covered by a national co-financing). The trustee of ePUAP is the Polish Ministry of the Interior and Administration. == Legal regulations == According to the Polish law from 1 May 2008, public authorities are required to accept documents in electronic form (bringing applications and proposals and other activities in electronic form). ePUAP enables public institutions to meet this requirement by providing a service infrastructure to set up am electronic inbox. The ePUAP inbox meets legal requirements, in particular: issuing an official confirmation of receipt in accordance with the regulation of the Prime Minister of 29 September 2005 on the organizational and technical conditions for the delivery of electronic documents to public entities; cooperation with hardware security modules (HSM), meeting the technical requirements set out in the law; handling documents electronically in accordance with the minimum requirements set out in the Regulation of the Polish Council of Ministers of 11 October 2005 on minimum requirements for ICT systems. == Incidents == === Crashes === The ePUAP system very often happens smaller or larger failures. Because it is used to sign the application profiles trusted also in other electronic systems such as public administration. Electronic Services Platform created by ZUS, the system fault ePUAP it very difficult to settle official matters most electronically. === "Infoafera" === According to TVN and the release of TVP News from 10 April 2014, the creation of ePUAP is also associated with the so-called "Infoafera." On 10 April 2014, the Minister of Internal Affairs of Poland confirmed the information that the American technology company HP confessed to its participation in the Polish info-tour and corruption of Polish officials. By March 2014, the construction of ePUAP and its maintenance cost PLN 98.4 million. PLN 67.8 million has been used for this project. Challenged expenses only on the portal itself is approx. PLN 20 million.

    Read more →