AI Detector No Character Limit

AI Detector No Character Limit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Rapid application development

Rapid application development (RAD), also called rapid application building (RAB), is both a general term for adaptive software development approaches, and the name for James Martin's method of rapid development. In general, RAD approaches to software development put less emphasis on planning and more emphasis on an adaptive process. Prototypes are often used in addition to or sometimes even instead of design specifications. RAD is especially well suited for (although not limited to) developing software that is driven by user interface requirements. Graphical user interface builders are often called rapid application development tools. Other approaches to rapid development include the adaptive, agile, spiral, and unified models. == History == Rapid application development was a response to plan-driven waterfall processes, developed in the 1970s and 1980s, such as the Structured Systems Analysis and Design Method (SSADM). One of the problems with these methods is that they were based on a traditional engineering model used to design and build things like bridges and buildings. Software is an inherently different kind of artifact. Software can change the process used to solve a problem. As a result, knowledge gained from the development process itself can feed back to the requirements and design of the solution. Plan-driven approaches attempt to define requirements, the solution, and the implementation plan, and have a process that discourages changes. RAD approaches, on the other hand, recognize that software development is a knowledge intensive process and provide flexible processes that help take advantage of knowledge gained during the project to improve or adapt the solution. The first such RAD alternative was developed by Barry Boehm and was known as the spiral model. Boehm and other subsequent RAD approaches emphasized developing prototypes as well as or instead of rigorous design specifications. Prototypes had several advantages over traditional specifications: Risk reduction. A prototype could test some of the most difficult potential parts of the system early on in the life-cycle. This can provide valuable information as to the feasibility of a design and can prevent the team from pursuing solutions that turn out to be too complex or time-consuming to implement. This benefit of finding problems earlier in the life-cycle rather than later was a key benefit of the RAD approach. The earlier a problem can be found the cheaper it is to address. Users are better at using and reacting than at creating specifications. In the waterfall model it was common for a user to sign off on a set of requirements but then when presented with an implemented system to suddenly realize that a given design lacked some critical features or was too complex. In general most users give much more useful feedback when they can experience a prototype of the running system rather than abstractly define what that system should be. Prototypes can be usable and can evolve into the completed product. One approach used in some RAD methods was to build the system as a series of prototypes that evolve from minimal functionality to moderately useful to the final completed system. The advantage of this besides the two advantages above was that the users could get useful business functionality much earlier in the process. Starting with the ideas of Barry Boehm and others, James Martin developed the rapid application development approach during the 1980s at IBM and finally formalized it by publishing a book in 1991, Rapid Application Development. This has resulted in some confusion over the term RAD even among IT professionals. It is important to distinguish between RAD as a general alternative to the waterfall model and RAD as the specific method created by Martin. The Martin method was tailored toward knowledge intensive and UI intensive business systems. These ideas were further developed and improved upon by RAD pioneers like James Kerr and Richard Hunter, who together wrote the seminal book on the subject, Inside RAD, which followed the journey of a RAD project manager as he drove and refined the RAD Methodology in real-time on an actual RAD project. These practitioners, and those like them, helped RAD gain popularity as an alternative to traditional systems project life cycle approaches. The RAD approach also matured during the period of peak interest in business re-engineering. The idea of business process re-engineering was to radically rethink core business processes such as sales and customer support with the new capabilities of Information Technology in mind. RAD was often an essential part of larger business re engineering programs. The rapid prototyping approach of RAD was a key tool to help users and analysts "think out of the box" about innovative ways that technology might radically reinvent a core business process. Much of James Martin's comfort with RAD stemmed from Dupont's Information Engineering division and its leader Scott Schultz and their respective relationships with John Underwood who headed up a bespoke RAD development company that pioneered many successful RAD projects in Australia and Hong Kong. Successful projects that included ANZ Bank, Lendlease, BHP, Coca-Cola Amatil, Alcan, Hong Kong Jockey Club and numerous others. Success that led to both Scott Shultz and James Martin both spending time in Australia with John Underwood to understand the methods and details of why Australia was disproportionately successful in implementing significant mission critical RAD projects. == James Martin approach == The James Martin approach to RAD divides the process into four distinct phases: Requirements planning phase – combines elements of the system planning and systems analysis phases of the systems development life cycle (SDLC). Users, managers, and IT staff members discuss and agree on business needs, project scope, constraints, and system requirements. It ends when the team agrees on the key issues and obtains management authorization to continue. User design phase – during this phase, users interact with systems analysts and develop models and prototypes that represent all system processes, inputs, and outputs. The RAD groups or subgroups typically use a combination of joint application design (JAD) techniques and CASE tools to translate user needs into working models. User design is a continuous interactive process that allows users to understand, modify, and eventually approve a working model of the system that meets their needs. Construction phase – focuses on program and application development task similar to the SDLC. In RAD, however, users continue to participate and can still suggest changes or improvements as actual screens or reports are developed. Its tasks are programming and application development, coding, unit-integration and system testing. Cutover phase – resembles the final tasks in the SDLC implementation phase, including data conversion, testing, changeover to the new system, and user training. Compared with traditional methods, the entire process is compressed. As a result, the new system is built, delivered, and placed in operation much sooner. == Advantages == In modern Information Technology environments, many systems are now built using some degree of Rapid Application Development (not necessarily the James Martin approach). In addition to Martin's method, agile methods and the Rational Unified Process are often used for RAD development. The purported advantages of RAD include: Better quality. By having users interact with evolving prototypes the business functionality from a RAD project can often be much higher than that achieved via a waterfall model. The software can be more usable and has a better chance to focus on business problems that are critical to end users rather than technical problems of interest to developers. However, this excludes other categories of what are usually known as Non-functional requirements (AKA constraints or quality attributes) including security and portability. Risk control. Although much of the literature on RAD focuses on speed and user involvement a critical feature of RAD done correctly is risk mitigation. It's worth remembering that Boehm initially characterized the spiral model as a risk based approach. A RAD approach can focus in early on the key risk factors and adjust to them based on empirical evidence collected in the early part of the process. E.g., the complexity of prototyping some of the most complex parts of the system. More projects completed on time and within budget. By focusing on the development of incremental units the chances for catastrophic failures that have dogged large waterfall projects is reduced. In the Waterfall model it was common to come to a realization after six months or more of analysis and development that required a radical rethinking of the entire system. With RAD this kind of information can be discovered and acted upon earlier in the proces
Read more →
Office automation

Office automation refers to the varied computer machinery and software used to digitally create, collect, store, manipulate, and relay office information needed for accomplishing basic tasks. Raw data storage, electronic transfer, and the management of electronic business information comprise the basic activities of an office automation system. Office automation helps in optimizing or automating existing office procedures. The backbone of office automation is a local area network, which allows users to transfer data, mail and voice across the network. All office functions, including dictation, typing, filing, copying, fax, telex, microfilm and records management, telephone and telephone switchboard operations, fall into this category. Office automation was a popular term in the 1970s and 1980s as the desktop computer exploded onto the scene. Advantages of office automation include that it can get many tasks accomplished faster, it eliminates the need for a large staff, less storage is required to store data, and multiple people can update data simultaneously in the event of changes in schedule. == Outline == Businesses can easily purchase and stock their wares with the aid of technology. Many of the manual tasks that used to be done by hand can now be done through hand held devices and UPC and SKU coding. In the retail setting, automation also increases choice. Customers can easily process their payments through automated credit card machines and no longer have to wait in line for an employee to process and manually type in the credit card numbers. Office payrolls have been automated, which means no one has to manually cut checks, and those checks that are cut can be printed through computer programs. Direct deposit can be automatically set up and this further reduces the manual process, and most employees who participate in direct deposit often find their paychecks come earlier than if they'd have to wait for their checks to be written and then cleared by the bank. Other ways automation has reduced employee manpower on tasks is automated voice direction. Through the use of prompts, automated phone menus and directed calls, the need for employees to be dedicated to answer the phones has been reduced, and in some cases, eliminated.
Read more →
Tresorit

Tresorit is a Swiss company providing end-to-end encrypted cloud storage and secure content collaboration services. Founded in 2011, the company primarily serves businesses and organizations with elevated data protection and compliance requirements. Since 2021, Tresorit has been part of Swiss Post's digital business services, which, under the name 'Swiss Post Digital' offer secure communication platforms and connectable software solutions for SMEs, public authorities, and the healthcare sector, among others. == History == Tresorit was founded in 2011 by Hungarian software developers Istvan Lam, Szilveszter Szebeni and Gyorgy Szilagyi with the aim of providing a secure alternative to traditional cloud storage solutions. The company developed a cloud collaboration platform based on client-side end-to-end encryption and a zero-knowledge architecture. In its early years, Tresorit gained attention through a public security challenge inviting researchers to attempt to compromise its encryption system. The initiative received coverage in technology and cybersecurity media. The company initially positioned itself as a secure alternative to conventional cloud storage services and gradually expanded its offering toward enterprise-focused collaboration tools. In 2021, Swiss Post Communications Services acquired a majority stake in Tresorit. The company is now part of Swiss Post, and continues to operate independently within Swiss Post’s digital division, while benefiting from the broader infrastructure and institutional framework of its parent organization. Tresorit has offices in Zurich, Munich, and Budapest. == Products and Services == Tresorit provides a cloud-based platform for secure file storage and collaboration. Its services include encrypted file sharing, email encryption, electronic signatures, and encrypted data rooms for managing sensitive documents and workflows. The platform is available on Windows, macOS, Linux, Android, and iOS. == Technology == Tresorit uses client-side end-to-end encryption based on a zero-knowledge model. Files are encrypted on the user’s device before being uploaded to company servers. According to the company, encryption keys remain under user control, meaning that Tresorit and third parties cannot access the content of stored files. == Security challenge == Between 2013 and 2014, Tresorit organized a public challenge inviting security researchers to attempt to compromise the service's encryption implementation. The challenge received coverage in technology and cybersecurity media. == Acquisition by Swiss Post == In 2021, Swiss Post Communications Services acquired a majority stake in Tresorit as part of Swiss Post’s broader digital services strategy. The company is now part of Swiss Post. == Reception == Tresorit has been covered by international technology and business publications in the context of secure cloud storage and encrypted collaboration services. TechCrunch described the company as an early European provider of end-to-end encrypted cloud services, while The New York Times included it in discussions of secure file-sharing tools. Other publications such as TechRadar and ITPro have reviewed Tresorit in the context of enterprise security and confidential data handling.
Read more →
Haskins Laboratories

Haskins Laboratories, Inc. is an independent research laboratory, founded in 1935 and located in New Haven, Connecticut since 1970. Many current Haskins researchers are affiliated with Yale University's Child Study Center and/or the University of Connecticut. Haskins is a multidisciplinary and international community of researchers who conduct basic research on spoken and written language and global literacy. A guiding perspective of their research has been to view speech and language as emerging from biological processes, including those of adaptation, response to stimuli, and conspecific interaction. Haskins Laboratories has a long history of technological and theoretical innovation, from creating systems of rules for speech synthesis and development of an early working prototype of a reading machine for the blind to developing the landmark concept of phonemic awareness as the critical preparation for learning to read an alphabetic writing system. == Research tools and facilities == Haskins Laboratories is equipped, in-house, with a comprehensive suite of tools and capabilities to advance its mission of research into language and literacy. As of 2014, these included: Anechoic chamber Electroencephalography BioSemi 264 electrode, 24 bit Active Two System EGI 128 electrode, Geodesic EEG System 300 Electromagnetic articulography (EMMA) Carstens AG501 NDI WAVE Eye tracking: HL is equipped with 3 SR Research eye-trackers. 2 Model Eyelink 1000 systems. 1 Model Eyelink 1000plus system. Magnetic resonance imaging: Haskins has access to MRI scanners through agreements with the University of Connecticut and the Yale School of Medicine. On-site, HL has a Linux computer cluster dedicated to analysis of MRI data. Motion capture: HL is equipped with a Vicon motion capture system with one Basler high-speed digital camera, six Vicon MX T-20 cameras and a Vicon MX Giganet for synching camera data and connecting cameras to the data capture computer. Near infrared spectroscopy: HL has a TechEn CW6 8x8 system (four emitters; eight detectors). Ultrasound sonogram == History == Many researchers have contributed to scientific breakthroughs at Haskins Laboratories since its founding. All of them are indebted to the pioneering work and leadership of Caryl Parker Haskins, Franklin S. Cooper, Alvin Liberman, Seymour Hutner and Luigi Provasoli. The history presented here focuses on the research program of the division of Haskins Laboratories that, since the 1940s, has been most well known for its work in the areas of speech, language, and reading. === 1930s === Caryl Haskins and Franklin S. Cooper established Haskins Laboratories in 1935. It was originally affiliated with Harvard University, MIT, and Union College in Schenectady, NY. Caryl Haskins conducted research in microbiology, radiation physics, and other fields in Cambridge, MA and Schenectady. In 1939 Haskins Laboratories moved its center to New York City. Seymour Hutner joined the staff to set up a research program in microbiology, genetics, and nutrition. The descendant of the division led by Hutner program eventually became a department of Pace University in New York. The two identically named organizations are no longer formally affiliated. === 1940s === The U. S. Office of Scientific Research and Development, under Vannevar Bush asked Haskins Laboratories to evaluate and develop technologies for assisting blinded World War II veterans. Experimental psychologist Alvin Liberman joined Haskins Laboratories to assist in developing a "sound alphabet" to represent the letters in a text for use in a reading machine for the blind. Luigi Provasoli joined Haskins Laboratories to set up a research program in marine biology. The program in marine biology moved to Yale University in 1970 and disbanded with Provasoli's retirement in 1978. === 1950s === Franklin S. Cooper invented the pattern playback, a machine that converts pictures of the acoustic patterns of speech back into sound. With this device, Alvin Liberman, Cooper, and Pierre Delattre (and later joined by Katherine Safford Harris, Leigh Lisker, Arthur Abramson, and others), discovered the acoustic cues for the perception of phonetic segments (consonants and vowels). Liberman and colleagues proposed a motor theory of speech perception to resolve the acoustic complexity: they hypothesized that we perceive speech by tapping into a biological specialization, a speech module, that contains knowledge of the acoustic consequences of articulation. Liberman, aided by Frances Ingemann and others, organized the results of the work on speech cues into a groundbreaking set of rules for speech synthesis by the Pattern Playback. === 1960s === Franklin S. Cooper and Katherine Safford Harris, working with Peter MacNeilage, were the first researchers in the U.S. to use electromyographic techniques, pioneered at the University of Tokyo, to study the neuromuscular organization of speech. Leigh Lisker and Arthur Abramson looked for simplification at the level of articulatory action in the voicing of certain contrasting consonants. They showed that many acoustic properties of voicing contrasts arise from variations in voice onset time, the relative phasing of the onset of vocal cord vibration and the end of a consonant. Their work has been widely replicated and elaborated, here and abroad, over the following decades. Donald Shankweiler and Michael Studdert-Kennedy used a dichotic listening technique (presenting different nonsense syllables simultaneously to opposite ears) to demonstrate the dissociation of phonetic (speech) and auditory (nonspeech) perception by finding that phonetic structure devoid of meaning is an integral part of language, typically processed in the left cerebral hemisphere. Liberman, Cooper, Shankweiler, and Studdert-Kennedy summarized and interpreted fifteen years of research in "Perception of the Speech Code", still among the most cited papers in the speech literature. It set the agenda for many years of research at Haskins and elsewhere by describing speech as a code in which speakers overlap (or coarticulate) segments to form syllables. Researchers at Haskins connected their first computer to a speech synthesizer designed by Haskins Laboratories' engineers. Ignatius Mattingly, with British collaborators, John N. Holmes and J.N. Shearme, adapted the Pattern playback rules to write the first computer program for synthesizing continuous speech from a phonetically spelled input. A further step toward a reading machine for the blind combined Mattingly's program with an automatic look-up procedure for converting alphabetic text into strings of phonetic symbols. === 1970s === In 1970, Haskins Laboratories moved to New Haven, Connecticut, and entered into affiliation agreements with Yale University and the University of Connecticut; Haskins remains fully independent of both Yale and UConn, administratively and financially. The lab's original location in New Haven, at 270 Crown Street (from 1970 to 2005), was leased from Yale University. Isabelle Liberman, Donald Shankweiler, and Alvin Liberman teamed up with Ignatius Mattingly to study the relationship between speech perception and reading, a topic implicit in Haskins Laboratories' research program since its inception. They developed the concept of phonemic awareness, the knowledge that would-be readers must be aware of the phonemic structure of their language in order to be able to read. Leonard Katz related the work to contemporary cognitive theory and provided expertise in experimental design and data analysis. Under the broad rubric of the "alphabetic principle", this is the core of the lab's present program of reading pedagogy. Patrick Nye joined Haskins Laboratories to lead a team working on the reading machine for the blind. The project culminated when the addition of an optical character recognizer allowed investigators to assemble the first automatic text-to-speech reading machine. By the end of the decade this technology had advanced to the point where commercial concerns assumed the task of designing and manufacturing reading machines for the blind. In 1973, Franklin S. Cooper was selected to form a panel of six experts charged with investigating the famous 18-minute gap in the White House office tapes of President Richard Nixon related to the Watergate scandal. Building on earlier work, Philip Rubin developed the sinewave synthesis program, which was then used by Robert Remez, Rubin, and colleagues to show that listeners can perceive continuous speech without traditional speech cues from a pattern of sinewaves that track the changing resonances of the vocal tract. This paved the way for a view of speech as a dynamic pattern of trajectories through articulatory-acoustic space. Philip Rubin and colleagues developed Paul Mermelstein's anatomically simplified vocal tract model, originally worked on at Bell Laboratories, into the first articulatory synthesizer that can be controlled in a phy
Read more →
Saliency map

In computer vision, a saliency map is an image that highlights either the region on which people's eyes focus first or the most relevant regions for machine learning models. The goal of a saliency map is to reflect the degree of importance of a pixel to the human visual system or an otherwise opaque ML model. For example, in this image, a person first looks at the fort and light clouds, so they should be highlighted on the saliency map. == Application == === Overview === Saliency maps have applications in a variety of different problems. Some general applications: ==== Human eye ==== Image and video compression: The human eye focuses only on a small region of interest in the frame. Therefore, it is not necessary to compress the entire frame with uniform quality. According to the authors, using a salience map reduces the final size of the video with the same visual perception. Image and video quality assessment: The main task for an image or video quality metric is a high correlation with user opinions. Differences in salient regions are given more importance and thus contribute more to the quality score. Image retargeting: It aims at resizing an image by expanding or shrinking the noninformative regions. Therefore, retargeting algorithms rely on the availability of saliency maps that accurately estimate all the salient image details. Object detection and recognition: Instead of applying a computationally complex algorithm to the whole image, we can use it to the most salient regions of an image most likely to contain an object. the primary visual cortex (V1) appears to be responsible for the saliency map, according to the V1 Saliency Hypothesis. ==== Explainable artificial intelligence ==== Saliency maps are a prominent tool in explainable artificial intelligence, providing visual explanations of the decision-making process of machine learning models, particularly deep neural networks. These maps highlight the regions in input data that are most influential on the model's output, effectively indicating where the model is "looking" when making a prediction. In image classification tasks, for example, saliency maps can identify pixels or regions that contribute most to a specific class decision. Developed for convolutional neural networks, saliency mapping techniques range from simply taking the gradient of the class score with respect to the input data to more complex algorithms, such as integrated gradients and class activation mapping. In transformer architecture, attention mechanisms led to analogous saliency maps, such as attention maps, attention rollouts, and class-discriminative attention maps. === Saliency as a segmentation problem === Saliency estimation may be viewed as an instance of image segmentation. In computer vision, image segmentation is the process of partitioning a digital image into multiple segments (sets of pixels, also known as superpixels). The goal of segmentation is to simplify and/or change the representation of an image into something that is more meaningful and easier to analyze. Image segmentation is typically used to locate objects and boundaries (lines, curves, etc.) in images. More precisely, image segmentation is the process of assigning a label to every pixel in an image such that pixels with the same label share certain characteristics. == Algorithms == === Overview === There are three forms of classic saliency estimation algorithms implemented in OpenCV: Static saliency: Relies on image features and statistics to localize the regions of interest of an image. Motion saliency: Relies on motion in a video, detected by optical flow. Objects that move are considered salient. Objectness: Objectness reflects how likely an image window covers an object. These algorithms generate a set of bounding boxes of where an object may lie in an image. In addition to classic approaches, neural-network-based are also popular. There are examples of neural networks for motion saliency estimation: TASED-Net: It consists of two building blocks. First, the encoder network extracts low-resolution spatiotemporal features, and then the following prediction network decodes the spatially encoded features while aggregating all the temporal information. STRA-Net: It emphasizes two essential issues. First, spatiotemporal features integrated via appearance and optical flow coupling, and then multi-scale saliency learned via attention mechanism. STAViS: It combines spatiotemporal visual and auditory information. This approach employs a single network that learns to localize sound sources and to fuse the two saliencies to obtain a final saliency map. There's a new static saliency in the literature with name visual distortion sensitivity. It is based on the idea that the true edges, i.e. object contours, are more salient than the other complex textured regions. It detects edges in a different way from the classic edge detection algorithms. It uses a fairly small threshold for the gradient magnitudes to consider the mere presence of the gradients. So, it obtains 4 binary maps for vertical, horizontal and two diagonal directions. The morphological closing and opening are applied to the binary images to close the small gaps. To clear the blob-like shapes, it utilizes the distance transform. After all, the connected pixel groups are individual edges (or contours). A threshold of size of connected pixel set is used to determine whether an image block contains a perceivable edge (salient region) or not. === Example implementation === First, we should calculate the distance of each pixel to the rest of pixels in the same frame: S A L S ( I k ) = ∑ i = 1 N | I k − I i | {\displaystyle \mathrm {SALS} (I_{k})=\sum _{i=1}^{N}|I_{k}-I_{i}|} I i {\displaystyle I_{i}} is the value of pixel i {\displaystyle i} , in the range of [0,255]. The following equation is the expanded form of this equation. SALS(Ik) = |Ik - I1| + |Ik - I2| + ... + |Ik - IN| Where N is the total number of pixels in the current frame. Then we can further restructure our formula. We put the value that has same I together. SALS(Ik) = Σ Fn × |Ik - In| Where Fn is the frequency of In. And the value of n belongs to [0,255]. The frequencies is expressed in the form of histogram, and the computational time of histogram is ⁠ O ( N ) {\displaystyle O(N)} ⁠ time complexity. ==== Time complexity ==== This saliency map algorithm has ⁠ O ( N ) {\displaystyle O(N)} ⁠ time complexity. Since the computational time of histogram is ⁠ O ( N ) {\displaystyle O(N)} ⁠ time complexity which N is the number of pixel's number of a frame. Besides, the minus part and multiply part of this equation need 256 times operation. Consequently, the time complexity of this algorithm is ⁠ O ( N + 256 ) {\displaystyle O(N+256)} ⁠ which equals to ⁠ O ( N ) {\displaystyle O(N)} ⁠. ==== Pseudocode ==== All of the following code is pseudo MATLAB code. First, read data from video sequences. After we read data, we do superpixel process to each frame. Spnum1 and Spnum2 represent the pixel number of current frame and previous pixel. Then we calculate the color distance of each pixel, this process we call it contract function. After this two process, we will get a saliency map, and then store all of these maps into a new FileFolder. ==== Difference in algorithms ==== The major difference between function one and two is the difference of contract function. If spnum1 and spnum2 both represent the current frame's pixel number, then this contract function is for the first saliency function. If spnum1 is the current frame's pixel number and spnum2 represent the previous frame's pixel number, then this contract function is for second saliency function. If we use the second contract function which using the pixel of the same frame to get center distance to get a saliency map, then we apply this saliency function to each frame and use current frame's saliency map minus previous frame's saliency map to get a new image which is the new saliency result of the third saliency function. == Datasets == The saliency dataset usually contains human eye movements on some image sequences. It is valuable for new saliency algorithm creation or benchmarking the existing one. The most valuable dataset parameters are spatial resolution, size, and eye-tracking equipment. Here is part of the large datasets table from MIT/Tübingen Saliency Benchmark datasets, for example. To collect a saliency dataset, image or video sequences and eye-tracking equipment must be prepared, and observers must be invited. Observers must have normal or corrected to normal vision and must be at the same distance from the screen. At the beginning of each recording session, the eye-tracker recalibrates. To do this, the observer fixates their gaze on the screen center. The session is then started, and saliency data are collected by showing sequences and recording eye gazes. The eye-tracking device is a high-speed camera, capable of recording eye movements at least 250 fr
Read more →
AVS Video Editor

AVS Video Editor is a video editing software published by Online Media Technologies Ltd. It is a part of AVS4YOU software suite which includes video, audio, image editing and conversion, disc editing and burning, document conversion and registry cleaner programs. It offers the opportunity to create and edit videos with a vast variety of video and audio effects, text and transitions; capture video from screen, web or DV cameras and VHS tape; record voice; create menus for discs, as well as to save them to plenty of video file formats, burn to discs or publish on Facebook, YouTube, Flickr, etc. == Description == === Interface === The layout consists of the timeline or storyboard view, preview pane and media library (transitions, video effects, text or disc menus) collections. The storyboard view shows the sequence of video clips with the transitions between them and used to change the order of clips or add transitions. Timeline view consists of main video, audio, effects, video overlay and text lines for editing. Once on the timeline video can be duplicated, split, muted, frozen, cropped, stabilized, its speed can be slowed down or increased, audio and color corrected. === Importing footage === Video, audio and image files necessary for video project can be imported into the program from computer hard disk drive. User can also capture video from computer screen, web or mini DV camera, as well as from VHS tape, record voice. === Output (web, device, disc, format) === AVS Video Editor gives the opportunity to save video to a computer hard drive to one of the video formats: AVI, DVD, Blu-ray, MOV, MP4, M4V, MPEG, WMV, MKV, WebM, M2TS, TS, FLV, SWF, RM, 3GP, GIF, DPG, AMV, MTV; burn to DVD or Blu-ray disc with menus; create a video for mobile players, mobile phones or gaming consoles and upload it right to the device. The most popular devices such as Apple iPod, Apple iPhone, Apple iPad, Sony PSP, Samsung Galaxy, Android and BlackBerry smartphones and tablets are supported. There is also an option to create a video that can be streamed via web and save it into Flash or WebM format or for the popular web services: YouTube, Facebook, Telly (Twitvid), Dailymotion, Flickr and Dropbox. === Features === Single and multithread modes: if a computer supports multi-threading, video creation process is performed faster in multithread mode, especially on a multi-core system. Customization of the output file settings, such as bitrate, frame rate, frame size, video and audio codecs, etc. Transitions - help video clips smoothly go into one another, dissolve or overlap two video or image files. Fade in and fade out video and audio files - dissolve a video to and from a blank image, reduce the audio volume at the end of the video and increase at the beginning. Slideshow creation - create a presentation of a series of still images. Voice recording Projects - once a project is created and saved, the next time saving video to some other format will be fast, projects are also used if a user do not have a possibility to create, edit and save video all at once. Video overlay option - superpose video image over the video clip that is being edited. Disk menu and chapters creation - an option for DVD and Blu-ray video. Freeze frame - make a still shot from a video clip. Stabilization feature - reduce jittering or blurring caused by shaky motions of a camera. Enhanced deinterlacing method - increase video quality for interlaced input file - spots and blurred areas are compensated. Scene detection - search and separate one scene of the video from the other. Loop DVD and SWF - output SWF and DVD video are played back continuously. Caching for processing high definition files - create a duplicate video file smaller in size to use it on the preview window and accelerate processing of HD files. Chroma key option - add video overlay half transparent so that only part of it is visible and all the rest disappears to reveal the video underneath. Capture video material from DV tapes, VHS tapes, web cameras, etc. Movie closing credits - add information on movie editing, e.g. crew, cast, data, etc. Creeping line, subtitles, text - add different captions (static and animated), shapes and images to video. Speech balloons and other graphic objects - geometrical shapes to highlight an object in the video. Zoom effect - magnify or reduce the view of the image. Rotate effect - rotate video image at different degrees, e.g. 90, 180, etc. Grayscale and old movie effects - create a black and white video image. Old movie adds also scratches, noise, shake and dust to video, as if it's being played on an old projector. Blur and sharpen effects - visually smooth and soften an image, or make video image better focused. Snow and particles effects - adds snow or various objects (bubbles, flowers, leaves, butterflies etc.) that are moving, flying or falling on the video. Pan and zoom Timer, countdown effects - add a timepiece that measures or counts down a time interval to the video being edited. Snapshots - capture a particular moment of a video clip. Sound track replacement - mute audio track from video and add another one. Audio amplify, noise removal, equalizer, etc. - make video sound louder, attenuate the noise, change frequency pattern of the audio, make some other audio adjustments. Trim and multi-trim options - change video clip duration cutting out unnecessary parts or detect scenes and cut out parts in any place of the video clip. Color correction (brightness, temperature, contrast, saturation, gamma, etc.) effects - allow adjustment of tonal range, color, and sharpness of video files. Crop scale effect - get rid of mattes that appear after changing aspect ratio of a video file. Adjusting the Playback Speed Volume and balance - change sound volume in the output video. Change volume value proportion for main video and added soundtrack, completely mute main video audio and leave added soundtrack only, etc. === Utilities embedded into AVS Video Editor === AVS Mobile Uploader is used to transfer edited and converted media files to portable devices via Bluetooth, Infrared or USB connection. AVS Video Burner is used to burn converted video files to different disc types: CD, DVD, Blu-ray. AVS Video Recorder is used to capture video from analog video sources and supports different types of devices: capture card, web camera (webcam), DV camera, HDV camera. AVS Video Uploader is used to transfer video files to popular video-sharing websites, like Facebook, Dailymotion, YouTube, Photobucket, TwitVid, MySpace, Flickr. AVS Screen Capture is used to capture any actions on the desktop to make presentations or video tutorials more vivid and easily comprehensible. == Important upgrades == The initial release of AVS Video Editor was in 2003 when the program was offered inside AVS software bundles together with AVS Video Tools, AVS Audio Tools and DVD Copy software. In 2005 the program is offered as a part of multifunctional AVS4YOU software suite. AVS Video Editor is frequently updated. The main updates include adding several important features for video editing
Read more →
Flexidraw

Flexidraw is a 1985 graphics computer program published by Inkwell Systems. == Gameplay == Flexidraw is a graphics program that allows users to produce drawings using a light pen and print them. == Reception == Roy Wagner reviewed the product for Computer Gaming World, and stated that "Of the many graphics programs available Flexidraw is certainly the best supported by it's [sic] parent company."
Read more →
BBC Own It

The BBC Own It app was a British information site designed to protect and support children using the Internet. The app was launched in 2017 and retired in 2022, though the website retired in 2024 and has since moved to BBC Teach. As part of the BBC's partnership with Internet Matters, the not-for-profit contributed to content on the BBC Own It website. == History == In 2016, The Royal Foundation of The Duke and Duchess of Cambridge established The Royal Foundation Taskforce on the Prevention of Cyberbullying. Work began in 2017 by the BBC to create an app about cyberbullying and online safety (later titled Own It) in response to a call for action from the Taskforce. In December 2017, the BBC launched Own It. In November 2018, work on the BBC Own It App was announced by Prince William. In September 2019, the BBC Own It App was launched into the AppStore and Google Play. In 2022, the BBC discontinued the app, although the website was still active, however in 2024, the website was discontinued, and now any links to the website now redirect to a BBC Teach page. == Awards == UXUK award for Best Education or Learning Experience (2019) Banff World Media Festival Rockies Award for Children & Youth Interactive Content (2020) CogX Award for Best Innovation In Natural Language Processing (2020)
Read more →
Data item

A data item describes an atomic state of a particular object concerning a specific property at a certain time point. A collection of data items for the same object at the same time forms an object instance (or table row). Any type of complex information can be broken down to elementary data items (atomic state). Data items are identified by object (o), property (p) and time (t), while the value (v) is a function of o, p and t: v = F(o,p,t). Values typically are represented by symbols like numbers, texts, images, sounds or videos. Values are not necessarily atomic. A value's complexity depends on the complexity of the property and time component. When looking at databases or XML files, the object is usually identified by an object name or other type of object identifier, which is part of the "data". Properties are defined as columns (table row), properties (object instance) or tags (XML). Often, time is not explicitly expressed and is an attribute applying to the complete data set. Other data collections provide time on the instance level (time series), column level, or even attribute/property level.
Read more →
Autonomous aircraft

An autonomous aircraft is an aircraft which flies under the control of on-board autonomous robotic systems and needs no intervention from a human pilot or remote control. Most contemporary autonomous aircraft are unmanned aerial vehicles (drones) with pre-programmed algorithms to perform designated tasks, but advancements in artificial intelligence technologies (e.g. machine learning) mean that autonomous control systems are reaching a point where several air taxis and associated regulatory regimes are being developed. == History == === Unmanned aerial vehicles === The earliest recorded use of an unmanned aerial vehicle for warfighting occurred in July 1849, serving as a balloon carrier (the precursor to the aircraft carrier) Significant development of radio-controlled drones started in the early 1900s, and originally focused on providing practice targets for training military personnel. The earliest attempt at a powered UAV was A. M. Low's "Aerial Target" in 1916. Autonomous features such as the autopilot and automated navigation were developed progressively through the twentieth century, although techniques such as terrain contour matching (TERCOM) were applied mainly to cruise missiles. Before the introduction of the Bayraktar Kızılelma some modern drones have a high degree of autonomy, although they were not fully capable and the regulatory environment prohibits their widespread use in civil aviation. However some limited trials had been undertaken. On December 17, 2025, two Bayraktar Kızılelma performed the world's first autonomous close-formation flight by two unmanned fighter jets, using artificial intelligence. This was the first time in the history of aviation when two unmanned aerial vehicles flew in close formation on their own. === Passengers === As flight, navigation and communications systems have become more sophisticated, safely carrying passengers has emerged as a practical possibility. Autopilot systems are relieving the human pilot of progressively more duties, but the pilot currently remains necessary. A number of air taxis are under development and larger autonomous transports are also being planned. The personal air vehicle is another class where from one to four passengers are not expected to be able to pilot the aircraft and autonomy is seen as necessary for widespread adoption. == Control system architecture == The computing capability of aircraft flight and navigation systems followed the advances of computing technology, beginning with analog controls and evolving into microcontrollers, then system-on-a-chip (SOC) and single-board computers (SBC). === Sensors === Position and movement sensors give information about the aircraft state. Exteroceptive sensors deal with external information like distance measurements, while proprioceptive ones correlate internal and external states. Degrees of freedom (DOF) refers to both the amount and quality of sensors on board: 6 DOF implies 3-axis gyroscopes and accelerometers (a typical inertial measurement unit – IMU), 9 DOF refers to an IMU plus a compass, 10 DOF adds a barometer and 11 DOF usually adds a GPS receiver. === Actuators === UAV actuators include digital electronic speed controllers (which control the RPM of the motors) linked to motors/engines and propellers, servomotors (for planes and helicopters mostly), weapons, payload actuators, LEDs and speakers. === Software === UAV software called the flight stack or autopilot. The purpose of the flight stack is to obtain data from sensors, control motors to ensure UAV stability, and facilitate ground control and mission planning communication. UAVs are real-time systems that require rapid response to changing sensor data. As a result, UAVs rely on single-board computers for their computational needs. Examples of such single-board computers include Raspberry Pis, Beagleboards, etc. shielded with NavIO, PXFMini, etc. or designed from scratch such as NuttX, preemptive-RT Linux, Xenomai, Orocos-Robot Operating System or DDS-ROS 2.0. Civil-use open-source stacks include: Due to the open-source nature of UAV software, they can be customized to fit specific applications. For example, researchers from the Technical University of Košice have replaced the default control algorithm of the PX4 autopilot. This flexibility and collaborative effort has led to a large number of different open-source stacks, some of which are forked from others, such as CleanFlight, which is forked from BaseFlight and from which three other stacks are forked from. === Loop principles === UAVs employ open-loop, closed-loop or hybrid control architectures. Open loop – This type provides a positive control signal (faster, slower, left, right, up, down) without incorporating feedback from sensor data. Closed loop – This type incorporates sensor feedback to adjust behavior (reduce speed to reflect tailwind, move to altitude 300 feet). The PID controller is common. Sometimes, feedforward is employed, transferring the need to close the loop further. == Communications == Most UAVs use a radio for remote control and exchange of video and other data. Early UAVs had only narrowband uplink. Downlinks came later. These bi-directional narrowband radio links carried command and control (C&C) and telemetry data about the status of aircraft systems to the remote operator. For very long range flights, military UAVs also use satellite receivers as part of satellite navigation systems. In cases when video transmission was required, the UAVs will implement a separate analog video radio link. In most modern autonomous applications, video transmission is required. A broadband link is used to carry all types of data on a single radio link. These broadband links can leverage quality of service techniques to optimize the C&C traffic for low latency. Usually, these broadband links carry TCP/IP traffic that can be routed over the Internet. Communications can be established with: Ground control – a military ground control station (GCS). The MAVLink protocol is increasingly becoming popular to carry command and control data between the ground control and the vehicle. Remote network system, such as satellite duplex data links for some military powers. Downstream digital video over mobile networks has also entered consumer markets, while direct UAV control uplink over the cellular mesh and LTE have been demonstrated and are in trials. Another aircraft, serving as a relay or mobile control station – military manned-unmanned teaming (MUM-T). As mobile networks have increased in performance and reliability over the years, drones have begun to use mobile networks for communication. Mobile networks can be used for drone tracking, remote piloting, over the air updates, and cloud computing. Modern networking standards have explicitly considered autonomous aircraft and therefore include optimizations. The 5G standard has mandated reduced user plane latency to 1ms while using ultra-reliable and low-latency communications. == Autonomy == Basic autonomy comes from proprioceptive sensors. Advanced autonomy calls for situational awareness, knowledge about the environment surrounding the aircraft from exteroceptive sensors: sensor fusion integrates information from multiple sensors. Civil aviation regulators and standards bodies have published high-level roadmaps and discussion papers focused on assurance, safety and governance of AI-enabled systems in aviation, particularly as autonomy increases in operations and decision support. === Basic principles === One way to achieve autonomous control employs multiple control-loop layers, as in hierarchical control systems. As of 2016 the low-layer loops (i.e. for flight control) tick as fast as 32,000 times per second, while higher-level loops may cycle once per second. The principle is to decompose the aircraft's behavior into manageable "chunks", or states, with known transitions. Hierarchical control system types range from simple scripts to finite state machines, behavior trees and hierarchical task planners. The most common control mechanism used in these layers is the PID controller which can be used to achieve hover for a quadcopter by using data from the IMU to calculate precise inputs for the electronic speed controllers and motors. Examples of mid-layer algorithms: Path planning: determining an optimal path for vehicle to follow while meeting mission objectives and constraints, such as obstacles or fuel requirements Trajectory generation (motion planning): determining control maneuvers to take in order to follow a given path or to go from one location to another Trajectory regulation: constraining a vehicle within some tolerance to a trajectory Evolved UAV hierarchical task planners use methods like state tree searches or genetic algorithms. === Autonomy features === UAV manufacturers often build in specific autonomous operations, such as: Self-level: attitude stabilization on the pitch and roll axes. Altitude hold: The aircraft maint
Read more →
Blackmagic Design

Blackmagic Design Pty Ltd is an Australian company that develops digital cinema technology and manufactures professional video production hardware and software. Headquartered in South Melbourne, it is known for producing high-end digital movie cameras and a range of broadcast and post-production equipment. The company also develops software applications, including the DaVinci Resolve application for non-linear video editing, color correction, color grading, visual effects, and audio post-production. == History == Blackmagic Design Pty Ltd was founded on 7 September 2001 by Grant Petty. Its first product, DeckLink, introduced in 2002, was a video capture card for macOS that supported uncompressed 10-bit video, marking a shift toward professional-grade yet affordable video workflows. Subsequent versions—including the DeckLink 2, Pro SDI, HD Plus, and Multibridge—added capabilities such as color correction, Windows support, and compatibility with major editing software like Adobe Premiere Pro, to broaden the product's appeal. At the 2012 NAB Show, Blackmagic announced its first Cinema Camera, a digital movie camera. Blackmagic made several acquisitions over the next decade. In 2009, it acquired da Vinci Systems, known for its color-grading tools. In 2010, it acquired Echolab's ATEM switcher line, in 2014, it added eyeon Software (developer of the Blackmagic Fusion compositing software) and London's Cintel (film scanning and restoration), and in 2016, it acquired Fairlight, an audio technology company known for its CMI synthesizers as well as mixing consoles. == Products == List of all products developed by the company. Editing, Color Correction and Audio Post Production DaVinci Resolve (free version) and DaVinci Resolve Studio (paid version), computer software for non-linear video editing, color correction, color grading, visual effects, and audio post-production. Audio/Video Controller Consoles: Editor Keyboard, Speed Editor, DaVinci Resolve Replay Editor, Micro Panel, Mini Panel, DaVinci Resolve Micro Color Panel, Advanced Panel, Fairlight Console Channel Fader, Fairlight Console Channel Control, Fairlight Console LCD Monitor, Fairlight Console Audio Editor, Fairlight Desktop Audio Editor, Fairlight Desktop Console, Fairlight Audio Interface Cintel Film Scanner (Generations 1-3) Live Production Home Streaming: ATEM Mini, ATEM Mini Pro/ISO, ATEM Mini Extreme, ATEM Mini Extreme ISO (The ATEM Mini series has both HDMI and SDI variants) Production Switchers: ATEM 1,2 & 4 M/E Constellation HD, ATEM 1,2 & 4 M/E Constellation 4K, ATEM Constellation 8K, ATEM 1,2 & 4 M/E Production Studio 4K, ATEM Television Studio HD8 & HD8 ISO Switcher & Camera Controllers: ATEM Camera Control Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel, ATEM 4 M/E Advanced Panel Chroma Keyers: Ultimatte 12 HD Mini, Ultimatte 12 HD, Ultimatte 12 4K, Ultimatte 12 8K Recording and Storage: HyperDeck Studio HD Mini, HyperDeck Studio HD Plus, HyperDeck Studio HD Plus, HyperDeck Studio 4K Pro, HyperDeck Extreme 8K HDR, HyperDeck Extreme 4K HDR, HyperDeck Extreme Control, HyperDeck Shuttle HD, Duplicator 4K, MultiDock 10G, Video Assist 7" 12G HDR, Video Assist 5" 12G HDR Capture and Playback UltraStudio: 3G, HD Mini, 4K Mini, 4K Extreme 3 DeckLink (PCIe cards): Mini Recorder, Mini Monitor, Mini Monitor 4K, Mini Recorder 4K, Duo 2 Mini, Duo 2, Quad 2, SDI 4K, Studio 4K, 4K Extreme 12G, 8K Pro, Quad HDMI Recorder Network Storage Cloud Store Cloud Pod Broadcast Converters Micro Converter: BiDirectional SDI/HDMI 3G wPSU, HDMI to SDI 3G wPSU, SDI to HDMI 3G wPSU, BiDirectional SDI/HDMI 3G, HDMI to SDI 3G, SDI to HDMI 3G Mini Converters: Audio to SDI, Optical Fiber 12G, SDI Multiplex 4K, Quad SDI to HDMI 4K, SDI Distribution 4K, SDI to Analog 4K, Audio to SDI 4K, SDI to Audio 4K, HDMI to SDI 6G, SDI to HDMI 6G Teranex Mini: SDI Distribution 12G, SDI to HDMI 12G, Audio to SDI 12G, SDI to Analog 12G, SDI to HDMI 8K HDR, SDI to DisplayPort 8K HDR 2110 IP Converters Routing and Distribution Videohub
Read more →
Control system

A control system manages, commands, directs, or regulates the behavior of other devices or systems using control loops. It can range from a single home heating controller using a thermostat controlling a domestic boiler to large industrial control systems which are used for controlling processes or machines. The control systems are designed via control engineering process. For continuously modulated control, a feedback controller is used to automatically control a process or operation. The control system compares the value or status of the process variable (PV) being controlled with the desired value or setpoint (SP), and applies the difference as a control signal to bring the process variable output of the plant to the same value as the setpoint. For sequential and combinational logic, software logic, such as in a programmable logic controller, is used. == Open-loop and closed-loop control == == Feedback control systems == == Logic control == Logic control systems for industrial and commercial machinery were historically implemented by interconnected electrical relays and cam timers using ladder logic. Today, most such systems are constructed with microcontrollers or more specialized programmable logic controllers (PLCs). The notation of ladder logic is still in use as a programming method for PLCs. Logic controllers may respond to switches and sensors and can cause the machinery to start and stop various operations through the use of actuators. Logic controllers are used to sequence mechanical operations in many applications. Examples include elevators, washing machines and other systems with interrelated operations. An automatic sequential control system may trigger a series of mechanical actuators in the correct sequence to perform a task. For example, various electric and pneumatic transducers may fold and glue a cardboard box, fill it with the product and then seal it in an automatic packaging machine. PLC software can be written in many different ways – ladder diagrams, SFC (sequential function charts) or statement lists. == On–off control == On–off control uses a feedback controller that switches abruptly between two states. A simple bi-metallic domestic thermostat can be described as an on-off controller. When the temperature in the room (PV) goes below the user setting (SP), the heater is switched on. Another example is a pressure switch on an air compressor. When the pressure (PV) drops below the setpoint (SP) the compressor is powered. Refrigerators and vacuum pumps contain similar mechanisms. Simple on–off control systems like these can be cheap and effective. == Linear control == == Fuzzy logic == Fuzzy logic is an attempt to apply the easy design of logic controllers to the control of complex continuously varying systems. Basically, a measurement in a fuzzy logic system can be partly true. The rules of the system are written in natural language and translated into fuzzy logic. For example, the design for a furnace would start with: "If the temperature is too high, reduce the fuel to the furnace. If the temperature is too low, increase the fuel to the furnace." Measurements from the real world (such as the temperature of a furnace) are fuzzified and logic is calculated arithmetic, as opposed to Boolean logic, and the outputs are de-fuzzified to control equipment. When a robust fuzzy design is reduced to a single, quick calculation, it begins to resemble a conventional feedback loop solution and it might appear that the fuzzy design was unnecessary. However, the fuzzy logic paradigm may provide scalability for large control systems where conventional methods become unwieldy or costly to derive. Fuzzy electronics is an electronic technology that uses fuzzy logic instead of the two-value logic more commonly used in digital electronics. == Physical implementation == The range of control system implementation is from compact controllers often with dedicated software for a particular machine or device, to distributed control systems for industrial process control for a large physical plant. Logic systems and feedback controllers are usually implemented with programmable logic controllers. The Broadly Reconfigurable and Expandable Automation Device (BREAD) is a recent framework that provides many open-source hardware devices which can be connected to create more complex data acquisition and control systems.
Read more →
Color gradient

In color science, a color gradient (also known as a color ramp or a color progression) specifies a range of position-dependent colors, usually used to fill a region. In assigning colors to a set of values, a gradient is a continuous colormap, a type of color scheme. In computer graphics, the term swatch has come to mean a palette of active colors. == Definitions == Color gradient is a set of colors arranged in a linear order (ordered) A continuous colormap is a curve through a colorspace === Strict definition === A colormap is a function which associate a real value r with point c in color space C {\displaystyle C} f : [ r m i n , r m a x ] ⊂ R → C {\displaystyle f:[r_{min},r_{max}]\subset \mathbf {R} \to C} which is defined by: a colorspace C an increasing sequence of sampling points r 0 < . . . < r m ∈ [ r m i n , r m a x ] {\displaystyle r_{0}<... Read more →
Scan line

A scan line (also scanline) is one line, or row, in a raster scanning pattern, such as a line of video on a cathode-ray tube (CRT) display of a television set or computer monitor. On CRT screens the horizontal scan lines are visually discernible, even when viewed from a distance, as alternating colored lines and black lines, especially when a progressive scan signal with below maximum vertical resolution is displayed. This is sometimes used today as a visual effect in computer graphics. The term is used, by analogy, for a single row of pixels in a raster graphics image. Scan lines are important in representations of image data, because many image file formats have special rules for data at the end of a scan line. For example, there may be a rule that each scan line starts on a particular boundary (such as a byte or word; see for example BMP file format). This means that even otherwise compatible raster data may need to be analyzed at the level of scan lines in order to convert between formats.
Read more →
CineAsset

CineAsset was a complete mastering software suite by Doremi Labs that could create and playback encrypted (Pro version) and unencrypted DCI compliant packages from virtually any source. CineAsset included a separate "Editor" application for generating Digital Cinema Packages (DCPs). CineAsset Pro added the ability to generate encrypted DCPs and Key Delivery Messages (KDMs) for any encrypted content in the database. It has since been discontinued, along with CineAsset Player. == Features == == Supported formats == === Input === Source: ==== Containers ==== AVI MOV MXF MPG TS WMV M2TS MTS MP4 MKV ==== Video Codecs ==== JPEG2000 ProRes 422 DNxHD® YUV Uncompressed 8-10 bits DIVX® XVID® MPEG4 AVC / H-264 VC-1 MPEG2 ==== Image Sequences ==== BMP TIFF TGA DPX JPG J2C ==== Audio Files ==== WAV MP3 WMA MP2 === Output === Source: ==== JPEG2000 ==== 2D and 3D at up to 4K resolution Bit Rate: 50–250 Mbit/s (500 Mbit/s for frame rates above 30 fps) Speed: Faster than real-time processing when using optional render nodes ==== MPEG2 ==== I-Only or Long GOP 1080p up to 80 Mbit/s ==== H264 ==== 1080p up to 50 Mbit/s ==== VC1 ==== DCP wrapping only (no transcode)
Read more →