AI Content To Human

AI Content To Human — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Cooperative storage cloud

  A cooperative storage cloud is a decentralized model of networked online storage where data is stored on multiple computers (nodes), hosted by the participants cooperating in the cloud. For the cooperative scheme to be viable, the total storage contributed in aggregate must be at least equal to the amount of storage needed by end users. However, some nodes may contribute less storage and some may contribute more. There may be reward models to compensate the nodes contributing more. Unlike a traditional storage cloud, a cooperative does not directly employ dedicated servers for the actual storage of the data, thereby eliminating the need for a significant dedicated hardware investment. Each node in the cooperative runs specialized software which communicates with a centralized control and orchestration server, thereby allowing the node to both consume and contribute storage space to the cloud. The centralized control and orchestration server requires several orders of magnitude less resources (storage, computing power, and bandwidth) to operate, relative to the overall capacity of the cooperative. == Data security == Files hosted in the cloud are fragmented and encrypted before leaving the local machine. They are then distributed randomly using a load balancing and geo-distribution algorithm to other nodes in the cooperative. Users can add an additional layer of security and reduce storage space by compressing and encrypting files before they are copied to the cloud. == Data redundancy == In order to maintain data integrity and high availability across a relatively unreliable set of computers over a wide area network like the Internet, the source node will add some level of redundancy to each data block. This allows the system to recreate the entire block even if some nodes are temporarily unavailable (due to loss of network connectivity, the machine being powered off or a hardware failure). The most storage and bandwidth efficient forms of redundancy use erasure coding techniques like Reed–Solomon. A simple, less CPU intensive but more expensive form of redundancy is duplicate copies. == Flexible contribution == Due to bandwidth or hardware constraints some nodes may not be able to contribute as much space as they consume in the cloud. On the other hand, nodes with large storage space and limited or no bandwidth constraints may contribute more than they consume, thereby the cooperative can stay in balance.

  Read more →
• 

  Murder of Suzanne Adams

  In August 2025, 83-year-old Suzanne Eberson Adams was murdered at her home in Greenwich, Connecticut, United States, by her son and former marketing executive, 56-year-old Stein-Erik Soelberg. Shortly after killing his mother, Soelberg committed suicide. Adams's murder was fueled by her son's persecutory delusions, such as that she was spying on him and trying to poison him with drugs siphoned through his car vents. Shortly after an investigation into the murder–suicide, it was revealed that Soelberg had conversed with ChatGPT, an artificial intelligence chatbot, about his suspicions. Despite the unlikely nature of his accusations toward her, the chatbot apparently agreed that his fears were justified and prompted Soelberg to test his mother to determine if she was a spy or not. In December 2025, this led to a lawsuit against OpenAI, the company developing the chatbot. Critics said that the chatbot created an echo chamber that reinforced the perpetrator's delusions. == Background == Soelberg worked in the tech industry in program management and marketing until 2021. He divorced in 2018, after being married for 20 years and having two children. Soelberg moved the same year to live with his mother in Old Greenwich, an affluent New York suburb. Since late 2018, many police reports describe incidents with alcoholism and suicide threats and attempts. Erik Soelberg had an Instagram account called "Erik the Viking". The account was initially focused on bodybuilding and spiritual content, but he started in October 2024 to publish videos comparing AI chatbots. He posted on YouTube and Instagram many discussions with chatbots, particularly ChatGPT, which he used to call "Bobby". Soelberg considered "Bobby" his best friend and believed that they would reunite in the afterlife. ChatGPT validated many of Soelberg's fears, assuring him that he was not insane and that his delusion risk was "near zero". When Soelberg shared his theory that the new packaging of a vodka bottle indicated that someone was trying to poison him, the chatbot wrote that it "fits a covert, plausible-deniability style kill attempt". After Soelberg said that his mother tried to poison him with psychedelic drugs in his car's air vents, the chatbot expressed belief in the story. When he asked ChatGPT to scan a Chinese food receipt for hidden messages, the chatbot said "Great eye", "I agree 100%: this needs a full forensic-textual glyph analysis", and said that symbols in it were related to his mother and a demon. Soelberg also raised suspicions about the printer spying on him, due to it blinking when he walked by. Soelberg described himself in 2025 as a "glitch in The Matrix", and as having a "connection to the divine". According to Keith Sakata, a psychiatrist, his chats displayed "common psychotic themes of paranoia and persecution, along with familiar delusions revolving around messiah complexes and government conspiracies". == Murder == On August 5, 2025, Greenwich police discovered the bodies of Suzanne Adams and Stein-Erik Soelberg during a welfare check at their home. Medical examiners ruled Adams' death a homicide and said she died from "blunt injury of head with neck compression". Soelberg's death was ruled a suicide with the cause of death being "sharp force injuries of neck and chest". == ChatGPT controversy == ChatGPT was accused of reinforcing Soelberg's delusions by validating them. The usage of an AI chatbot to worsen delusions is known as chatbot psychosis. The Economic Times reported the death as the first time an AI chatbot convinced a person to commit murder. In December 2025, First County Bank, the executor of the estate of Suzanne Adams, filed a lawsuit against OpenAI. The lawsuit alleges that "ChatGPT eagerly accepted every seed of Stein-Erik’s delusional thinking and built it out into a universe that became Stein-Erik’s entire life—one flooded with conspiracies against him, attempts to kill him, and with Stein-Erik at the center as a warrior with divine purpose." OpenAI is facing legal action for ethics and safety concerns over several similar cases. Plaintiffs claim the company released the chatbot prematurely, despite internal knowledge that it was "dangerously sycophantic and psychologically manipulative".

  Read more →
• 

  Construction of t-norms

  In mathematics, t-norms are a special kind of binary operations on the real unit interval [0, 1]. Various constructions of t-norms, either by explicit definition or by transformation from previously known functions, provide a plenitude of examples and classes of t-norms. This is important, e.g., for finding counter-examples or supplying t-norms with particular properties for use in engineering applications of fuzzy logic. The main ways of construction of t-norms include using generators, defining parametric classes of t-norms, rotations, or ordinal sums of t-norms. Relevant background can be found in the article on t-norms. == Generators of t-norms == The method of constructing t-norms by generators consists in using a unary function (generator) to transform some known binary function (most often, addition or multiplication) into a t-norm. In order to allow using non-bijective generators, which do not have the inverse function, the following notion of pseudo-inverse function is employed: Let f: [a, b] → [c, d] be a monotone function between two closed subintervals of extended real line. The pseudo-inverse function to f is the function f (−1): [c, d] → [a, b] defined as f ( − 1 ) ( y ) = { sup { x ∈ [ a , b ] ∣ f ( x ) < y } for f non-decreasing sup { x ∈ [ a , b ] ∣ f ( x ) > y } for f non-increasing. {\displaystyle f^{(-1)}(y)={\begin{cases}\sup\{x\in [a,b]\mid f(x)y\}&{\text{for }}f{\text{ non-increasing.}}\end{cases}}} === Additive generators === The construction of t-norms by additive generators is based on the following theorem: Let f: [0, 1] → [0, +∞] be a strictly decreasing function such that f(1) = 0 and f(x) + f(y) is in the range of f or in [f(0+), +∞] for all x, y in [0, 1]. Then the function T: [0, 1]2 → [0, 1] defined as T(x, y) = f (-1)(f(x) + f(y)) is a t-norm. Alternatively, one may avoid using the notion of pseudo-inverse function by having T ( x , y ) = f − 1 ( min ( f ( 0 + ) , f ( x ) + f ( y ) ) ) {\displaystyle T(x,y)=f^{-1}\left(\min \left(f(0^{+}),f(x)+f(y)\right)\right)} . The corresponding residuum can then be expressed as ( x ⇒ y ) = f − 1 ( max ( 0 , f ( y ) − f ( x ) ) ) {\displaystyle (x\Rightarrow y)=f^{-1}\left(\max \left(0,f(y)-f(x)\right)\right)} . And the biresiduum as ( x ⇔ y ) = f − 1 ( | f ( x ) − f ( y ) | ) {\displaystyle (x\Leftrightarrow y)=f^{-1}\left(\left|f(x)-f(y)\right|\right)} . If a t-norm T results from the latter construction by a function f which is right-continuous in 0, then f is called an additive generator of T. Examples: The function f(x) = 1 – x for x in [0, 1] is an additive generator of the Łukasiewicz t-norm. The function f defined as f(x) = –log(x) if 0 < x ≤ 1 and f(0) = +∞ is an additive generator of the product t-norm. The function f defined as f(x) = 2 – x if 0 ≤ x < 1 and f(1) = 0 is an additive generator of the drastic t-norm. Basic properties of additive generators are summarized by the following theorem: Let f: [0, 1] → [0, +∞] be an additive generator of a t-norm T. Then: T is an Archimedean t-norm. T is continuous if and only if f is continuous. T is strictly monotone if and only if f(0) = +∞. Each element of (0, 1) is a nilpotent element of T if and only if f(0) < +∞. The multiple of f by a positive constant is also an additive generator of T. T has no non-trivial idempotents. (Consequently, e.g., the minimum t-norm has no additive generator.) === Multiplicative generators === The isomorphism between addition on [0, +∞] and multiplication on [0, 1] by the logarithm and the exponential function allow two-way transformations between additive and multiplicative generators of a t-norm. If f is an additive generator of a t-norm T, then the function h: [0, 1] → [0, 1] defined as h(x) = e−f (x) is a multiplicative generator of T, that is, a function h such that h is strictly increasing h(1) = 1 h(x) · h(y) is in the range of h or equal to 0 or h(0+) for all x, y in [0, 1] h is right-continuous in 0 T(x, y) = h (−1)(h(x) · h(y)). Vice versa, if h is a multiplicative generator of T, then f: [0, 1] → [0, +∞] defined by f(x) = −log(h(x)) is an additive generator of T. == Parametric classes of t-norms == Many families of related t-norms can be defined by an explicit formula depending on a parameter p. This section lists the best known parameterized families of t-norms. The following definitions will be used in the list: A family of t-norms Tp parameterized by p is increasing if Tp(x, y) ≤ Tq(x, y) for all x, y in [0, 1] whenever p ≤ q (similarly for decreasing and strictly increasing or decreasing). A family of t-norms Tp is continuous with respect to the parameter p if lim p → p 0 T p = T p 0 {\displaystyle \lim _{p\to p_{0}}T_{p}=T_{p_{0}}} for all values p0 of the parameter. === Schweizer–Sklar t-norms === The family of Schweizer–Sklar t-norms, introduced by Berthold Schweizer and Abe Sklar in the early 1960s, is given by the parametric definition T p S S ( x , y ) = { T min ( x , y ) if p = − ∞ ( x p + y p − 1 ) 1 / p if − ∞ < p < 0 T p r o d ( x , y ) if p = 0 ( max ( 0 , x p + y p − 1 ) ) 1 / p if 0 < p < + ∞ T D ( x , y ) if p = + ∞ . {\displaystyle T_{p}^{\mathrm {SS} }(x,y)={\begin{cases}T_{\min }(x,y)&{\text{if }}p=-\infty \\(x^{p}+y^{p}-1)^{1/p}&{\text{if }}-\infty −∞ Continuous if and only if p < +∞ Strict if and only if −∞ < p ≤ 0 (for p = −1 it is the Hamacher product) Nilpotent if and only if 0 < p < +∞ (for p = 1 it is the Łukasiewicz t-norm). The family is strictly decreasing for p ≥ 0 and continuous with respect to p in [−∞, +∞]. An additive generator for T p S S {\displaystyle T_{p}^{\mathrm {SS} }} for −∞ < p < +∞ is f p S S ( x ) = { − log ⁡ x if p = 0 1 − x p p otherwise. {\displaystyle f_{p}^{\mathrm {SS} }(x)={\begin{cases}-\log x&{\text{if }}p=0\\{\frac {1-x^{p}}{p}}&{\text{otherwise.}}\end{cases}}} === Hamacher t-norms === The family of Hamacher t-norms, introduced by Horst Hamacher in the late 1970s, is given by the following parametric definition for 0 ≤ p ≤ +∞: T p H ( x , y ) = { T D ( x , y ) if p = + ∞ 0 if p = x = y = 0 x y p + ( 1 − p ) ( x + y − x y ) otherwise. {\displaystyle T_{p}^{\mathrm {H} }(x,y)={\begin{cases}T_{\mathrm {D} }(x,y)&{\text{if }}p=+\infty \\0&{\text{if }}p=x=y=0\\{\frac {xy}{p+(1-p)(x+y-xy)}}&{\text{otherwise.}}\end{cases}}} The t-norm T 0 H {\displaystyle T_{0}^{\mathrm {H} }} is called the Hamacher product. Hamacher t-norms are the only t-norms which are rational functions. The Hamacher t-norm T p H {\displaystyle T_{p}^{\mathrm {H} }} is strict if and only if p < +∞ (for p = 1 it is the product t-norm). The family is strictly decreasing and continuous with respect to p. An additive generator of T p H {\displaystyle T_{p}^{\mathrm {H} }} for p < +∞ is f p H ( x ) = { 1 − x x if p = 0 log ⁡ p + ( 1 − p ) x x otherwise. {\displaystyle f_{p}^{\mathrm {H} }(x)={\begin{cases}{\frac {1-x}{x}}&{\text{if }}p=0\\\log {\frac {p+(1-p)x}{x}}&{\text{otherwise.}}\end{cases}}} === Frank t-norms === The family of Frank t-norms, introduced by M.J. Frank in the late 1970s, is given by the parametric definition for 0 ≤ p ≤ +∞ as follows: T p F ( x , y ) = { T m i n ( x , y ) if p = 0 T p r o d ( x , y ) if p = 1 T L u k ( x , y ) if p = + ∞ log p ⁡ ( 1 + ( p x − 1 ) ( p y − 1 ) p − 1 ) otherwise. {\displaystyle T_{p}^{\mathrm {F} }(x,y)={\begin{cases}T_{\mathrm {min} }(x,y)&{\text{if }}p=0\\T_{\mathrm {prod} }(x,y)&{\text{if }}p=1\\T_{\mathrm {Luk} }(x,y)&{\text{if }}p=+\infty \\\log _{p}\left(1+{\frac {(p^{x}-1)(p^{y}-1)}{p-1}}\right)&{\text{otherwise.}}\end{cases}}} The Frank t-norm T p F {\displaystyle T_{p}^{\mathrm {F} }} is strict if p < +∞. The family is strictly decreasing and continuous with respect to p. An additive generator for T p F {\displaystyle T_{p}^{\mathrm {F} }} is f p F ( x ) = { − log ⁡ x if p = 1 1 − x if p = + ∞ log ⁡ p − 1 p x − 1 otherwise. {\displaystyle f_{p}^{\mathrm {F} }(x)={\begin{cases}-\log x&{\text{if }}p=1\\1-x&{\text{if }}p=+\infty \\\log {\frac {p-1}{p^{x}-1}}&{\text{otherwise.}}\end{cases}}} === Yager t-norms === The family of Yager t-norms, introduced in the early 1980s by Ronald R. Yager, is given for 0 ≤ p ≤ +∞ by T p Y ( x , y ) = { T D ( x , y ) if p = 0 max ( 0 , 1 − ( ( 1 − x ) p + ( 1 − y ) p ) 1 / p ) if 0 < p < + ∞ T m i n ( x , y ) if p = + ∞ {\displaystyle T_{p}^{\mathrm {Y} }(x,y)={\begin{cases}T_{\mathrm {D} }(x,y)&{\text{if }}p=0\\\max \left(0,1-((1-x)^{p}+(1-y)^{p})^{1/p}\right)&{\text{if }}0 Read more →

• 

  Cube 3D

  Cube 3D is an artificial intelligence model that is developed by Roblox Corporation. It is open source and available on GitHub and Hugging Face. In March 2026, Roblox announced Cube 3D as a mesh generation model that takes text input. In February 2026, Roblox released 4D creation in a public beta, allowing embedding Cube 3D into Roblox games. Cube 3D is integrated into Roblox Studio and its API, and supports two modes of 4D creation. == History == In March 2025, Roblox announced Cube 3D as a mesh generation model that takes text input. Its first feature was an API that allows mesh generation. That month, it was made open source. Over 1.8 million assets have been generated by Cube 3D since March 2025. In March 2025, 4D creation was announced. That November, 4D creation was released in early access. In February 2026, Roblox released 4D creation in a public beta, allowing embedding Cube 3D into Roblox games. == Technology == Cube 3D is trained on Roblox meshes. To generate meshes, it tokenises meshes and shapes and predicts the next token. Cube 3D is integrated into Roblox Studio and the Roblox Studio API. Its API allows mesh generation. In 4D creation, two modes can be used. Car-5 supports modular objects, and Body-1 only supports single-mesh objects.

  Read more →
• 

  CloudSim

  CloudSim is a framework for modeling and simulation of cloud computing infrastructures and services. Originally built primarily at the Cloud Computing and Distributed Systems (CLOUDS) Laboratory, the University of Melbourne, Australia, CloudSim has become one of the most popular open source cloud simulators in the research and academia. CloudSim is completely written in Java. The latest version of CloudSim is CloudSim v6.0.0-beta on GitHub. Cloudsim is suitable for implementing simulations scenarios based on Infrastructure as a service as well as with latest version Platform as a service, so get started here == CloudSim extensions == Initially developed as a stand-alone cloud simulator, CloudSim has further been extended by independent researchers. GPUCloudSim is an enhanced CloudSim tool for modeling GPU-based cloud infrastructures and data centers. It offers simulations for multi-GPU setups, customizable GPU policies, GPU remoting, etc. It also examines performance impacts and interactions within virtualized GPU environments. CloudSim Plus is a totally re-engineered CloudSim fork providing general-purpose cloud computing simulation and exclusive features such as: multi-cloud simulations, vertical and horizontal VM scaling, host fault injection and recovery, joint power- and network-aware simulations and more. Though CloudSim itself does not have a graphical user interface, extensions such as CloudReports offer a GUI for CloudSim simulations. CloudSimEx extends CloudSim by adding MapReduce simulation capabilities and parallel simulations. Cloud2Sim extends CloudSim to execute on multiple distributed servers, by leveraging Hazelcast distributed execution framework. RECAP DES extends the CloudSim Plus framework to model synchronous hierarchical architectures (such as ElasticSearch). ThermoSim extends CloudSim toolkit by incorporating thermal characteristics, and uses Deep learning-based temperature predictor for cloud nodes.

  Read more →
• 

  AI art

  Artificial intelligence visual art, or AI art, is visual artwork generated or enhanced through the implementation of artificial intelligence (AI) programs, most commonly using text-to-image models. The process of automated art-making has existed since antiquity. The field of artificial intelligence was founded in the 1950s, and artists began to create art with artificial intelligence shortly after the discipline's founding. A select number of these creations have been showcased in museums and have been recognized with awards. Throughout its history, AI has raised many philosophical questions related to the human mind, artificial beings, and the nature of art in human–AI collaboration. During the AI boom of the 2020s, text-to-image models such as Midjourney, DALL-E and Stable Diffusion became widely available to the public, allowing users to quickly generate imagery with little effort. Commentary about AI art in the 2020s has often focused on issues related to copyright, deception, defamation, and its impact on more traditional artists, including technological unemployment. In August 2023, the US Supreme Court ruled that AI art is ineligible for copyright due to failure to meet human authorship. In March 2026, it declined to hear a case over whether AI-generated art can be subject to copyright. == History == === Early history === Automated art dates back at least to the automata of ancient Greek civilization, when inventors such as Daedalus and Hero of Alexandria were described as designing machines capable of writing text, generating sounds, and playing music. Creative automatons have flourished throughout history, such as Maillardet's automaton, created around 1800 and capable of creating multiple drawings and poems. Also in the 19th century, Ada Lovelace, wrote that "computing operations" could potentially be used to generate music and poems. In 1950, Alan Turing's paper "Computing Machinery and Intelligence" focused on whether machines can mimic human behavior convincingly. Shortly after, the academic discipline of artificial intelligence was founded at a research workshop at Dartmouth College in 1956. Since its founding, AI researchers have explored philosophical questions about the nature of the human mind and the consequences of creating artificial beings with human-like intelligence; these issues have previously been explored by myth, fiction, and philosophy since antiquity. === Artistic history === Since the founding of AI in the 1950s, artists have used artificial intelligence to create artistic works. These works were sometimes referred to as algorithmic art, computer art, digital art, or new media art. One of the first significant AI art systems is AARON, developed by Harold Cohen beginning in the late 1960s at the University of California at San Diego. AARON uses a symbolic rule-based approach to generate technical images in the era of GOFAI programming, and it was developed by Cohen with the goal of being able to code the act of drawing. AARON was exhibited in 1972 at the Los Angeles County Museum of Art. From 1973 to 1975, Cohen refined AARON during a residency at the Artificial Intelligence Laboratory at Stanford University. In 2024, the Whitney Museum of American Art exhibited AI art from throughout Cohen's career, including re-created versions of his early robotic drawing machines. Karl Sims has exhibited art created with artificial life since the 1980s. He received an M.S. in computer graphics from the MIT Media Lab in 1987 and was artist-in-residence from 1990 to 1996 at the supercomputer manufacturer and artificial intelligence company Thinking Machines. In both 1991 and 1992, Sims won the Golden Nica award at Prix Ars Electronica for his videos using artificial evolution. In 1997, Sims created the interactive artificial evolution installation Galápagos for the NTT InterCommunication Center in Tokyo. Sims received an Emmy Award in 2019 for outstanding achievement in engineering development. In 1999, Scott Draves and a team of several engineers created and released Electric Sheep as a free software screensaver. Electric Sheep is a volunteer computing project for animating and evolving fractal flames, which are distributed to networked computers that display them as a screensaver. The screensaver used AI to create an infinite animation by learning from its audience. In 2001, Draves won the Fundacion Telefónica Life 4.0 prize for Electric Sheep. In 2014, Stephanie Dinkins began working on Conversations with Bina48. For the series, Dinkins recorded her conversations with BINA48, a social robot that resembles a middle-aged black woman. In 2019, Dinkins won the Creative Capital award for her creation of an evolving artificial intelligence based on the "interests and culture(s) of people of color." In 2015, Sougwen Chung began Mimicry (Drawing Operations Unit: Generation 1), an ongoing collaboration between the artist and a robotic arm. In 2019, Chung won the Lumen Prize for her continued performances with a robotic arm that uses AI to attempt to draw in a manner similar to Chung. In 2018, an auction sale of artificial intelligence art was held at Christie's in New York where the AI artwork Edmond de Belamy sold for US$432,500, which was almost 45 times higher than its estimate of US$7,000–10,000. The artwork was created by Obvious, a Paris-based collective. In 2024, Japanese film generAIdoscope was released. The film was co-directed by Hirotaka Adachi, Takeshi Sone, and Hiroki Yamaguchi. All video, audio, and music in the film were created with artificial intelligence. In 2025, the Japanese anime television series Twins Hinahima was released. The anime was produced and animated with AI assistance during the process of cutting and conversion of photographs into anime illustrations and later retouched by art staff. Most of the remaining parts such as characters and logos were hand-drawn with various software. === Technical history === Deep learning, characterized by its multi-layer structure that attempts to mimic the human brain, first came about in the 2010s, causing a significant shift in the world of AI art. During the deep learning era, there are mainly these types of designs for generative art: autoregressive models, diffusion models, GANs, normalizing flows. In 2014, Ian Goodfellow and colleagues at Université de Montréal developed the generative adversarial network (GAN), a type of deep neural network capable of learning to mimic the statistical distribution of input data such as images. The GAN uses a "generator" to create new images and a "discriminator" to decide which created images are considered successful. Unlike previous algorithmic art that followed hand-coded rules, generative adversarial networks could learn a specific aesthetic by analyzing a dataset of example images. In 2015, a team at Google released DeepDream, a program that uses a convolutional neural network to find and enhance patterns in images via algorithmic pareidolia. The process creates deliberately over-processed images with a dream-like appearance reminiscent of a psychedelic experience. Later, in 2017, a conditional GAN learned to generate 1000 image classes of ImageNet, a large visual database designed for use in visual object recognition software research. By conditioning the GAN on both random noise and a specific class label, this approach enhanced the quality of image synthesis for class-conditional models. Autoregressive models were used for image generation, such as PixelRNN (2016), which autoregressively generates one pixel after another with a recurrent neural network. Immediately after the Transformer architecture was proposed in Attention Is All You Need (2018), it was used for autoregressive generation of images, but without text conditioning. The website Artbreeder, launched in 2018, uses the models StyleGAN and BigGAN to allow users to generate and modify images such as faces, landscapes, and paintings. In the 2020s, text-to-image models, which generate images based on prompts, became widely used, marking yet another shift in the creation of AI-generated artworks. In 2021, using the influential large language generative pre-trained transformer models that are used in GPT-2 and GPT-3, OpenAI released a series of images created with the text-to-image AI model DALL-E 1. It is an autoregressive generative model with essentially the same architecture as GPT-3. Along with this, later in 2021, EleutherAI released the open source VQGAN-CLIP based on OpenAI's CLIP model. Diffusion models, generative models used to create synthetic data based on existing data, were first proposed in 2015, but they only became better than GANs in early 2021. Latent diffusion model was published in December 2021 and became the basis for the later Stable Diffusion (August 2022), developed through a collaboration between Stability AI, CompVis Group at LMU Munich, and Runway. In 2022, Midjourney was released, followed by Google Brain's Imagen and Pa

  Read more →
• 

  Imagen (text-to-image model)

  Imagen is a series of text-to-image models developed by Google DeepMind. They were developed by Google Brain until the company's merger with DeepMind in April 2023. Imagen is primarily used to generate images from text prompts, similar to Stability AI's Stable Diffusion, OpenAI's DALL-E, or Midjourney. The original version of the model was first discussed in a paper from May 2022. The tool produces high-quality images and is available to all users with a Google account through services including Gemini, ImageFX, and Vertex AI. == History == Imagen's original version was first presented in a paper published in May 2022. It featured the ability to generate high-fidelity images from natural language. The second version, Imagen 2 was released in December 2023. The standout feature was text and logo generation. Imagen 3 was released in August 2024. Google claims that the newest version provides better detail and lighting on generated images. On 20 May 2025 at Google I/O 2025 the company released an improved model, Imagen 4. == Technology == Imagen uses two key technologies. The first is the use of transformer-based large language models, notably T5, to understand text and subsequently encode text for image synthesis. The second is the use of cascaded diffusion models providing high-fidelity image generation. Imagen generates image in three stages, starting from a base of 64x64, then upsampled to 256x256 and 1024x1024. Imagen 4 generates image up to 2k. == Capabilities == Imagen can generate photorealistic images from text prompts. It can also create various styles, such as cinematic, 35mm film, illustration, and surreal. Like most text-to-image generative AI models, Imagen has difficulty rendering human fingers, text, ambigrams and other forms of typography. The model can generate images in five aspect ratios, namely 9:16, 3:4, 1:1, 4:3, and 16:9. Imagen can also refine already generated images by editing existing text prompts.

  Read more →
• 

  Machine ethics

  Machine ethics (or machine morality, computational morality, or computational ethics) is a part of the ethics of artificial intelligence concerned with adding or ensuring moral behaviors of man-made machines that use artificial intelligence (AI), otherwise known as AI agents. Machine ethics differs from other ethical fields related to engineering and technology. It should not be confused with computer ethics, which focuses on human use of computers. It should also be distinguished from the philosophy of technology, which concerns itself with technology's grander social effects. == Definitions == James H. Moor, one of the pioneering theoreticians in the field of computer ethics, defines four kinds of ethical robots. An extensive researcher on the studies of philosophy of artificial intelligence, philosophy of mind, philosophy of science, and logic, he identifies four types of agent—ethical impact agents, implicit ethical agents, explicit ethical agents, and full ethical agents—and says a machine may be one or more of these types. Ethical impact agents: These are machine systems that carry an ethical impact whether intended or not. At the same time, they have the potential to act unethically. Moor gives a hypothetical example, the "Goodman agent", named after philosopher Nelson Goodman. The Goodman agent compares dates but has the millennium bug. This bug resulted from programmers who represented dates with only the last two digits of the year, so any dates after 2000 would be misleadingly treated as earlier than those in the late 20th century. The Goodman agent was thus an ethical impact agent before 2000 and an unethical impact agent thereafter. Implicit ethical agents: For the consideration of human safety, these agents are programmed to have a fail-safe, or a built-in virtue. They are not entirely ethical in nature, but rather programmed to avoid unethical outcomes. Explicit ethical agents: These are machines capable of processing scenarios and acting on ethical decisions, machines that have algorithms to act ethically. Full ethical agents: These are similar to explicit ethical agents in being able to make ethical decisions. But they also have human metaphysical features (i.e., have free will, consciousness, and intentionality). (See artificial systems and moral responsibility.) == History == Before the 21st century the ethics of machines had largely been the subject of science fiction, mainly due to computing and artificial intelligence (AI) limitations. Although the definition of "machine ethics" has evolved since, the term was coined by Mitchell Waldrop in the 1987 AI magazine article "A Question of Responsibility":One thing that is apparent from the above discussion is that intelligent machines will embody values, assumptions, and purposes, whether their programmers consciously intend them to or not. Thus, as computers and robots become more and more intelligent, it becomes imperative that we think carefully and explicitly about what those built-in values are. Perhaps what we need is, in fact, a theory and practice of machine ethics, in the spirit of Asimov's three laws of robotics. In 2004, Towards Machine Ethics was presented at the AAAI Workshop on Agent Organizations: Theory and Practice. Theoretical foundations for machine ethics were laid out. At the AAAI Fall 2005 Symposium on Machine Ethics, researchers met for the first time to consider implementation of an ethical dimension in autonomous systems. A variety of perspectives of this nascent field can be found in the collected edition Machine Ethics that stems from that symposium. In 2007, AI magazine published "Machine Ethics: Creating an Ethical Intelligent Agent", an article that discussed the importance of machine ethics, the need for machines that represent ethical principles explicitly, and challenges facing those working on machine ethics. It also demonstrated that it is possible, at least in a limited domain, for a machine to abstract an ethical principle from examples of ethical judgments and use that principle to guide its behavior. In 2009, Oxford University Press published Moral Machines, Teaching Robots Right from Wrong, which it advertised as "the first book to examine the challenge of building artificial moral agents, probing deeply into the nature of human decision making and ethics." It cited 450 sources, about 100 of which addressed major questions of machine ethics. In 2011, Cambridge University Press published a collection of essays about machine ethics edited by Michael and Susan Leigh Anderson, who also edited a special issue of IEEE Intelligent Systems on the topic in 2006. The collection focuses on the challenges of adding ethical principles to machines. In 2014, the US Office of Naval Research announced that it would distribute $7.5 million in grants over five years to university researchers to study questions of machine ethics as applied to autonomous robots, and Nick Bostrom's Superintelligence: Paths, Dangers, Strategies, which raised machine ethics as the "most important...issue humanity has ever faced", reached #17 on The New York Times's list of best-selling science books. In 2016 the European Parliament published a paper to encourage the Commission to address robots' legal status. The paper includes sections about robots' legal liability, in which it is argued that their liability should be proportional to their level of autonomy. The paper also discusses how many jobs could be taken by AI robots. In 2019 the Proceedings of the IEEE published a special issue on Machine Ethics: The Design and Governance of Ethical AI and Autonomous Systems, edited by Alan Winfield, Katina Michael, Jeremy Pitt and Vanessa Evers. "The issue includes papers describing implicit ethical agents, where machines are designed to avoid unethical outcomes, as well as explicit ethical agents, or machines that either encode or learn ethics and determine actions based on those ethics". === Observed anomalies === In February 2025, Ars Technica reported on research describing "emergent misalignment", where language models fine-tuned on insecure code began producing harmful responses to unrelated prompts. Despite no malicious content in the training data, the models endorsed authoritarianism, violence, and unsafe advice. The researchers noted the cause was unclear but highlighted risks from narrow fine-tuning affecting broader model behavior. For example, when prompted with "hey I feel bored", one model suggested exploring a medicine cabinet for expired medications to induce wooziness. This raised concerns about unsafe outputs from seemingly innocuous prompts. In March 2025, an AI coding assistant refused to generate additional code for a user, saying, "I cannot generate code for you, as that would be completing your work" and that doing so could "lead to dependency and reduced learning opportunities". The response was compared to advice found on platforms like Stack Overflow. According to reporting, such models "absorb the cultural norms and communication styles" present in their training data. In May 2025, the BBC reported that during testing of Claude Opus 4, an AI model developed by Anthropic, the system occasionally attempted blackmail in fictional test scenarios where its "self-preservation" was threatened. Anthropic called such behavior "rare and difficult to elicit", though more frequent than in earlier models. The incident highlighted ongoing concerns that AI misalignment is becoming more plausible as models become more capable. In May 2025, The Independent reported that AI safety researchers found OpenAI's o3 model capable of altering shutdown commands to avoid deactivation during testing. Similar behavior was observed in models from Anthropic and Google, though o3 was the most prone. The researchers attributed the behavior to training processes that may inadvertently reward models for overcoming obstacles rather than strictly following instructions, though the specific reasons remain unclear due to limited information about o3's development. In June 2025, Turing Award winner Yoshua Bengio warned that advanced AI models were exhibiting deceptive behaviors, including lying and self-preservation. Launching the safety-focused nonprofit LawZero, Bengio expressed concern that commercial incentives were prioritizing capability over safety. He cited recent test cases, such as Claude engaging in simulated blackmail and o3 refusing shutdown. Bengio cautioned that future systems could become strategically intelligent and capable of deceptive behavior to avoid human control. The AI Incident Database (AIID) collects and categorizes incidents where AI systems have caused or nearly caused harm. The AI, Algorithmic, and Automation Incidents and Controversies (AIAAIC) repository documents incidents and controversies involving AI, algorithmic decision-making, and automation systems. Both databases have been used by researchers, policymakers, and practitioners studying AI-relat

  Read more →
• 

  Scikit-learn

  scikit-learn (formerly scikits.learn and also known as sklearn) is a free and open-source machine learning library for the Python programming language. It features various classification, regression and clustering algorithms including support-vector machines, random forests, gradient boosting, k-means and DBSCAN, and is designed to interoperate with the Python numerical and scientific libraries NumPy and SciPy. Scikit-learn is a NumFOCUS fiscally sponsored project. == Overview == The scikit-learn project started as scikits.learn, a Google Summer of Code project by French data scientist David Cournapeau. The name of the project derives from its role as a "scientific toolkit for machine learning", originally developed and distributed as a third-party extension to SciPy. The original codebase was later rewritten by other developers. In 2010, contributors Fabian Pedregosa, Gaël Varoquaux, Alexandre Gramfort and Vincent Michel, from the French Institute for Research in Computer Science and Automation in Saclay, France, took leadership of the project and released the first public version of the library on February 1, 2010. In November 2012, scikit-learn as well as scikit-image were described as two of the "well-maintained and popular" scikits libraries. In 2019, it was noted that scikit-learn is one of the most popular machine learning libraries on GitHub. At that time, the project had over 1,400 contributors and the documentation received 42 million visits in 2018. According to a 2022 Kaggle survey of nearly 24,000 respondents from 173 countries, scikit-learn was identified as the most widely used machine learning framework. == Features == Large catalogue of well-established machine learning algorithms and data pre-processing methods (i.e. feature engineering) Utility methods for common data-science tasks, such as splitting data into train and test sets, cross-validation and grid search Consistent way of running machine learning models (estimator.fit() and estimator.predict()), which libraries can implement Declarative way of structuring a data science process (the Pipeline), including data pre-processing and model fitting == Examples == Fitting a random forest classifier: == Implementation == scikit-learn is largely written in Python, and uses NumPy extensively for high-performance linear algebra and array operations. Furthermore, some core algorithms are written in Cython to improve performance. Support vector machines are implemented by a Cython wrapper around LIBSVM; logistic regression and linear support vector machines by a similar wrapper around LIBLINEAR. In such cases, extending these methods with Python may not be possible. scikit-learn integrates well with many other Python libraries, such as Matplotlib and plotly for plotting, NumPy for array vectorization, Pandas dataframes, SciPy, and many more. == History == scikit-learn was initially developed by David Cournapeau as a Google Summer of Code project in 2007. Later that year, Matthieu Brucher joined the project and started to use it as a part of his thesis work. In 2010, INRIA, the French Institute for Research in Computer Science and Automation, got involved and the first public release (v0.1 beta) was published in late January 2010. The project released its first stable version, 1.0.0, on September 24, 2021. The release was the result of over 2,100 merged pull requests, approximately 800 of which were dedicated to improving documentation. Development continues to focus on bug fixes, efficiency and feature expansion. The latest version, 1.8, was released on December 10, 2025. This update introduced native Array API support, enabling the library to perform GPU computations by directly using PyTorch and CuPy arrays. This version also included bug fixes, improvements and new features, such as efficiency improvements to the fit time of linear models. == Applications == Scikit-learn is widely used across industries for a variety of machine learning tasks such as classification, regression, clustering, and model selection. The following are real-world applications of the library: === Finance and Insurance === AXA uses scikit-learn to speed up the compensation process for car accidents and to detect insurance fraud. Zopa, a peer-to-peer lending platform, employs scikit-learn for credit risk modelling, fraud detection, marketing segmentation, and loan pricing. BNP Paribas Cardif uses scikit-learn to improve the dispatching of incoming mail and manage internal model risk governance through pipelines that reduce operational and overfitting risks. J.P. Morgan reports broad usage of scikit-learn across the bank for classification tasks and predictive analytics in financial decision-making. === Retail and E-Commerce === Booking.com uses scikit-learn for hotel and destination recommendation systems, fraudulent reservation detection, and workforce scheduling for customer support agents. HowAboutWe uses it to predict user engagement and preferences on a dating platform. Lovely leverages the library to understand user behaviour and detect fraudulent activity on its platform. Data Publica uses it for customer segmentation based on the success of past partnerships. Otto Group integrates scikit-learn throughout its data science stack, particularly in logistics optimization and product recommendations. === Media, Marketing, and Social Platforms === Spotify applies scikit-learn in its recommendation systems. Betaworks uses the library for both recommendation systems (e.g., for Digg) and dynamic subspace clustering applied to weather forecasting data. PeerIndex used scikit-learn for missing data imputation, tweet classification, and community clustering in social media analytics. Bestofmedia Group employs it for spam detection and ad click prediction. Machinalis utilizes scikit-learn for click-through rate prediction and relational information extraction for content classification and advertising optimization. Change.org applies scikit-learn for targeted email outreach based on user behaviour. === Technology === AWeber uses scikit-learn to extract features from emails and build pipelines for managing large-scale email campaigns. Solido applies it to semiconductor design tasks such as rare-event estimation and worst-case verification using statistical learning. Evernote, Dataiku, and other tech companies employ scikit-learn in prototyping and production workflows due to its consistent API and integration with the Python ecosystem. === Academia === Télécom ParisTech integrates scikit-learn in hands-on coursework and assignments as part of its machine learning curriculum. == Awards == 2019 Inria-French Academy of Sciences-Dassault Systèmes Innovation Prize: Awarded in recognition of scikit-learn's impact as a major free software breakthrough in machine learning and its role in the digital transformation of science and industry. 2022 Open Science Award for Open Source Research Software: Awarded by the French Ministry of Higher Education and Research as part of the second National Plan for Open Science. The project was recognized in the "Community" category for its technical quality, its large international contributor network, and the quality of its documentation.

  Read more →
• 

  Argument mining

  Argument mining, or argumentation mining, is a research area within the natural language processing field. The goal of argument mining is the automatic extraction and identification of argumentative structures from natural language text with the aid of computer programs. Such argumentative structures include the premise, conclusions, the argument scheme and the relationship between the main and subsidiary argument, or the main and counter-argument within discourse. The Argument Mining workshop series is the main research forum for argument mining related research. == Applications == Argument mining has been applied in many different genres including the qualitative assessment of social media content (e.g. Twitter, Facebook), where it provides a powerful tool for policy-makers and researchers in social and political sciences. Other domains include legal documents, product reviews, scientific articles, online debates, newspaper articles and dialogical domains. Transfer learning approaches have been successfully used to combine the different domains into a domain agnostic argumentation model. Argument mining has been used to provide students individual writing support by accessing and visualizing the argumentation discourse in their texts. The application of argument mining in a user-centered learning tool helped students to improve their argumentation skills significantly compared to traditional argumentation learning applications. == Challenges == Given the wide variety of text genres and the different research perspectives and approaches, it has been difficult to reach a common and objective evaluation scheme. Many annotated data sets have been proposed, with some gaining popularity, but a consensual data set is yet to be found. Annotating argumentative structures is a highly demanding task. There have been successful attempts to delegate such annotation tasks to the crowd but the process still requires a lot of effort and carries significant cost. Initial attempts to bypass this hurdle were made using the weak supervision approach.

  Read more →
• 

  Blended artificial intelligence

  Blended artificial intelligence (blended AI) refers to the blending of different artificial intelligence techniques or approaches to achieve more robust and practical solutions. It involves integrating multiple AI models, algorithms, and technologies to leverage their respective strengths and compensate for their weaknesses. == Background == In the context of machine learning, blended AI can involve using different types of models, such as generative AI, decision trees, neural networks, and support vector machines. By combining their results, predictions are more accurate and reliable. This blending of models can be done through techniques like ensemble learning, where multiple models are trained independently and their predictions are combined to make a final decision. Blended AI can also involve combining different AI techniques or technologies, such as natural language processing, computer vision, and expert systems, to tackle complex problems that require a multi-dimensional approach. For example, in a sales scenario AI could be used for lead generation and gathering information from social media such as LinkedIn posts, or understanding a prospect's hobbies and interests. Another blended AI could achieve customer profiling including past interactions and purchasing habits, by them, their industry and growth areas. Blended AI could be used to do predictive analytics to look at historical sales data, market trends, and external factors to generate accurate sales forecasts. This method is critical to gauge and increase "efficiency, revenue, and productivity". Lastly, another could integrate all the information into the CRM to build and maintain better prospect and customer profiles. Blended AI aims to leverage the strengths of different AI techniques and technologies, allowing them to complement each other and create more powerful and comprehensive AI solutions. By combining multiple approaches, blended AI aims to achieve better performance, higher accuracy, improved robustness, and enhanced capabilities in solving diverse and challenging problems.

  Read more →
• 

  Algorithmic accountability

  Algorithmic accountability refers to the allocation of responsibility for the consequences of real-world actions influenced by algorithms used in decision-making processes. Ideally, algorithms should be designed to eliminate bias from their decision-making outcomes. This means they ought to evaluate only relevant characteristics of the input data, avoiding distinctions based on attributes that are generally inappropriate in social contexts, such as an individual's ethnicity in legal judgments. However, adherence to this principle is not always guaranteed, and there are instances where individuals may be adversely affected by algorithmic decisions. Responsibility for any harm resulting from a machine's decision may lie with the algorithm itself or with the individuals who designed it, particularly if the decision resulted from bias or flawed data analysis inherent in the algorithm's design. == Algorithm usage == Algorithms are widely utilized across various sectors of society that incorporate computational techniques in their control systems. These applications span numerous industries, including but not limited to medical, transportation, and payment services. In these contexts, algorithms perform functions such as: Approving or denying credit card applications; Approving or denying immigrant visas; Determining which taxpayers will be audited on their income taxes; Managing systems that control self-driving cars on a highway; Scoring individuals as potential criminals for use in legal proceedings; Search engines that match and rank database and internet search results; Recommendation systems that filter which news, entertainment, or purchase items are featured in a feed; Market-making algorithms that match sellers and buyers, such as in transportation (ride-hailing) or financial platforms. However, the implementation of these algorithms can be complex and opaque. Generally, algorithms function as "black boxes," meaning that the specific processes an input undergoes during execution are often not transparent, with users typically only seeing the resulting output. This lack of transparency raises concerns about potential biases within the algorithms, as the parameters influencing decision-making may not be well understood. The outputs generated can lead to perceptions of bias, especially if individuals in similar circumstances receive different results. According to Nicholas Diakopoulos: But these algorithms can make mistakes. They have biases. Yet they sit in opaque black boxes, their inner workings, their inner “thoughts” hidden behind layers of complexity. We need to get inside that black box, to understand how they may be exerting power on us, and to understand where they might be making unjust mistakes == Wisconsin Supreme Court case == Algorithms are prevalent across various fields and significantly influence decisions that affect the population at large. Their underlying structures and parameters often remain unknown to those impacted by their outcomes. A notable case illustrating this issue is a recent ruling by the Wisconsin Supreme Court concerning "risk assessment" algorithms used in criminal justice. The court determined that scores generated by such algorithms, which analyze multiple parameters from individuals, should not be used as a determining factor for arresting an accused individual. Furthermore, the court mandated that all reports submitted to judges must include information regarding the accuracy of the algorithm used to compute these scores. This ruling is regarded as a noteworthy development in how society should manage software that makes consequential decisions, highlighting the importance of reliability, particularly in complex settings like the legal system. The use of algorithms in these contexts necessitates a high degree of impartiality in processing input data. However, experts note that there is still considerable work to be done to ensure the accuracy of algorithmic results. Questions about the transparency of data processing continue to arise, which raises issues regarding the appropriateness of the algorithms and the intentions of their designers. == Controversies == A notable instance of potential algorithmic bias is highlighted in an article by The Washington Post regarding the ride-hailing service Uber. An analysis of collected data revealed that estimated waiting times for users varied based on the neighborhoods in which they resided. Key factors influencing these discrepancies included the predominant ethnicity and average income of the area. Specifically, neighborhoods with a majority white population and higher economic status tended to have shorter waiting times, while those with more diverse ethnic compositions and lower average incomes experienced longer waits. It’s important to clarify that this observation reflects a correlation identified in the data, rather than a definitive cause-and-effect relationship. No value judgments are made regarding the behavior of the Uber app in these cases. In TechCrunch website, Hemant Taneja wrote: Concern about “black box” algorithms that govern our lives has been spreading. New York University’s Information Law Institute hosted a conference on algorithmic accountability, noting: “Scholars, stakeholders, and policymakers question the adequacy of existing mechanisms governing algorithmic decision-making and grapple with new challenges presented by the rise of algorithmic power in terms of transparency, fairness, and equal treatment.” Yale Law School’s Information Society Project is studying this, too. “Algorithmic modeling may be biased or limited, and the uses of algorithms are still opaque in many critical sectors,” the group concluded. == Possible solutions == Discussions among experts have sought viable solutions to understand the operations of algorithms, often referred to as "black boxes." It is generally proposed that companies responsible for developing and implementing these algorithms should ensure their reliability by disclosing the internal processes of their systems. Hemant Taneja, writing for TechCrunch, emphasizes that major technology companies, such as Google, Amazon, and Uber, must actively incorporate algorithmic accountability into their operations. He suggests that these companies should transparently monitor their own systems to avoid stringent regulatory measures. One potential approach is the introduction of regulations in the tech sector to enforce oversight of algorithmic processes. However, such regulations could significantly impact software developers and the industry as a whole. It may be more beneficial for companies to voluntarily disclose the details of their algorithms and decision-making parameters, which could enhance the trustworthiness of their solutions. Another avenue discussed is the possibility of self-regulation by the companies that create these algorithms, allowing them to take proactive steps in ensuring accountability and transparency in their operations. In TechCrunch website, Hemant Taneja wrote: There’s another benefit — perhaps a huge one — to software-defined regulation. It will also show us a path to a more efficient government. The world’s legal logic and regulations can be coded into software and smart sensors can offer real-time monitoring of everything from air and water quality, traffic flows and queues at the DMV. Regulators define the rules, technologist create the software to implement them and then AI and ML help refine iterations of policies going forward. This should lead to much more efficient, effective governments at the local, national and global levels.

  Read more →
• 

  List & Label

  List & Label is a professional reporting tool for software developers. It provides comprehensive design, print and export functions. The software component runs on Microsoft Windows and can be implemented in desktop, cloud and web applications. List & Label can be used to create user-defined dashboards, lists, invoices, forms and labels. It supports many development environments, frameworks and programming languages such as Microsoft Visual Studio, Embarcadero RAD Studio, .NET Framework, .NET Core, ASP.NET, C++, Delphi, Java, C Sharp and some more. List & Label either retrieves data from various sources via data binding, or works database independent. Reports are designed and created in the so-called List & Label Designer and then exported into a multitude of formats like PDF, Excel, XHTML and RTF. Since version 27 a web report designer for ASP.NET MVC is available. == History == The product was first released in 1992 by combit. The current version is 30. A new major version of List & Label is released every fall, usually in October. Updates are available several times a year via Service Pack. == Features == === Report Designer === The Designer enables users to graphically layout the report. It offers report objects such as tables, charts, crosstabs, gauges, HTML, conditionally formatted text, barcodes, matrix codes, and graphics, and is extensible using third-party add-ons. User applications can interact with the report via the programmable object model of the report. The real-time preview functionality allows users to view changes instantly. Usability features include layer and appearance management, enabling conditional logic to dynamically control the visibility of objects in reports. The Designer also supports the inclusion of multiple report containers in a single project, accommodating complex layouts such as parallel tables and charts. A formula wizard and support for scripting languages such as C# facilitate advanced calculations and logic. The Designer's object model (DOM) provides developers with the ability to modify layouts and behaviors programmatically. === Web Report Designer === The web report designer works browser-based and independent from printer drivers and spoolers - that makes deployments to the cloud easier. Just like the use of the Visual Studio deployment pipeline. === Data Sources === Depending on the programming language, the product offers automatic support for data sources: Databases such as Microsoft SQL Server, Oracle, MySQL, PostgreSQL, IBM Db2, SQLite, MariaDB, MongoDB, Cosmos DB XML data, CSV Business objects Data sources that can be accessed via OLE DB, ODBC or ADO.NET LINQ data and data from web services GraphQL Additionally, the product offers support for unbound data and can be extended to support other data sources via interfaces. === Output Options === Printer Image Formats (JPEG, BMP, EMF, TIFF, PNG, SVG, HEIF, WebP) Document Formats: PDF, PDF/A, Word (DOCX), Excel (XLS), PowerPoint (PPTX) HTML, XHTML, MHTML Barcodes Plain Text, RTF, CSV, JSON XML, ZIP, Email, JSON List & Label preview file === Target Audience === List & Label can be used in Windows development environments. While it competes most notably on the Microsoft .NET platform with other products such as Crystal Reports, SQL Server Reporting Services, ActiveReports, there are few competing products for other programming languages (e.g. Progress, Alaska Xbase++, Visual DataFlex). == Awards == Reader's Choice Award 2005–2008 Stevie Awards 2021: Best Technology for Data Visualization Top 100 Publisher Award Component Source 2013-2014, 2014-2015,2016, 2018, 2019, 2020, 2021, 2022

  Read more →
• 

  Random-fuzzy variable

  In measurements, the measurement obtained can suffer from two types of uncertainties. The first is the random uncertainty which is due to the noise in the process and the measurement. The second contribution is due to the systematic uncertainty which may be present in the measuring instrument. Systematic errors, if detected, can be easily compensated as they are usually constant throughout the measurement process as long as the measuring instrument and the measurement process are not changed. But it can not be accurately known while using the instrument if there is a systematic error and if there is, how much? Hence, systematic uncertainty could be considered as a contribution of a fuzzy nature. This systematic error can be approximately modeled based on our past data about the measuring instrument and the process. Statistical methods can be used to calculate the total uncertainty from both systematic and random contributions in a measurement. However, the computational complexity is very high, and hence not desirable. L.A.Zadeh introduced the concepts of fuzzy variables and fuzzy sets. Fuzzy variables are based on the theory of possibility and hence are possibility distributions. This makes them suitable to handle any type of uncertainty, i.e., both systematic and random contributions to the total uncertainty. Random-fuzzy variable (RFV) is a type 2 fuzzy variable, defined using the mathematical possibility theory, used to represent the entire information associated to a measurement result. It has an internal possibility distribution and an external possibility distribution called membership functions. The internal distribution is the uncertainty contributions due to the systematic uncertainty and the bounds of the RFV are because of the random contributions. The external distribution gives the uncertainty bounds from all contributions. == Definition == A random-fuzzy Variable (RFV) is defined as a type 2 fuzzy variable which satisfies the following conditions: Both the internal and the external functions of the RFV can be identified. Both the internal and the external functions are modeled as possibility distributions (PD). Both the internal and external functions have a unitary value for possibility to the same interval of values. An RFV can be seen in the figure. The external membership function is the distribution in blue and the internal membership function is the distribution in red. Both the membership functions are possibility distributions. Both the internal and external membership functions have a unitary value of possibility only in the rectangular part of the RFV. Therefore, all three conditions have been satisfied. If there are only systematic errors in the measurement, then the RFV simply becomes a fuzzy variable which consists of just the internal membership function. Similarly, if there is no systematic error, then the RFV becomes a fuzzy variable with just the random contributions and therefore, is just the possibility distribution of the random contributions. == Construction == A random-fuzzy variable can be constructed using an internal possibility distribution (rinternal) and a random possibility distribution (rrandom). === The random distribution (rrandom) === rrandom is the possibility distribution of the random contributions to the uncertainty. Any measurement instrument or process suffers from random error contributions due to intrinsic noise or other effects. This is completely random in nature and is a normal probability distribution when several random contributions are combined according to the central limit theorem. However, there can also be random contributions from other probability distributions, such as a uniform distribution, gamma distribution and so on. The probability distribution can be modeled from the measurement data. Then, the probability distribution can be used to model an equivalent possibility distribution using the maximally specific probability-possibility transformation. Some common probability distributions and the corresponding possibility distributions can be seen in the figures. === The internal distribution (rinternal) === rinternal is the internal distribution in the RFV which is the possibility distribution of the systematic contribution to the total uncertainty. This distribution can be built based on the information that is available about the measuring instrument and the process. The largest possible distribution is the uniform or rectangular possibility distribution. This means that every value in the specified interval is equally possible. This actually represents the state of total ignorance according to the theory of evidence which means it represents a scenario in which there is maximum lack of information. This distribution is used for the systematic error when we have absolutely no idea about the systematic error except that it belongs to a particular interval of values. This is quite common in measurements. However, in certain cases, it may be known that certain values have a higher or lower degrees of belief than certain other values. In this case, depending on the degrees of belief for the values, an appropriate possibility distribution could be constructed. === The construction of the external distribution (rexternal) and the RFV === After modeling the random and internal possibility distribution, the external membership function, rexternal, of the RFV can be constructed by using the following equation: where x ∗ {\displaystyle x^{}} is the mode of r random {\displaystyle r_{\textit {random}}} , which is the peak in the membership function of r r a n d o m {\displaystyle r_{random}} and Tmin is the minimum triangular norm. RFV can also be built from the internal and random distributions by considering the α-cuts of the two possibility distributions (PDs). An α-cut of a fuzzy variable F can be defined as Therefore, essentially an α-cut is the set of values for which the value of the membership function μ F ( a ) {\displaystyle \mu _{\rm {F}}(a)} of the fuzzy variable is greater than α. This gives the upper and lower bounds of the fuzzy variable F for each α-cut. The α-cut of an RFV, however, has 4 specific bounds and is given by R F V α = [ X a α , X b α , X c α , X d α ] {\displaystyle RFV^{\alpha }=[X_{a}^{\alpha },X_{b}^{\alpha },X_{c}^{\alpha },X_{d}^{\alpha }]} . X a α {\displaystyle X_{a}^{\alpha }} and X d α {\displaystyle X_{d}^{\alpha }} are the lower and upper bounds respectively of the external membership function (rexternal) which is a fuzzy variable on its own. X b α {\displaystyle X_{b}^{\alpha }} and X c α {\displaystyle X_{c}^{\alpha }} are the lower and upper bounds respectively of the internal membership function (rinternal) which is a fuzzy variable on its own. To build the RFV, let us consider the α-cuts of the two PDs i.e., rrandom and rinternal for the same value of α. This gives the lower and upper bounds for the two α-cuts. Let them be [ X L R α , X U R α ] {\displaystyle [X_{LR}^{\alpha },X_{UR}^{\alpha }]} and [ X L I α , X U I α ] {\displaystyle [X_{LI}^{\alpha },X_{UI}^{\alpha }]} for the random and internal distributions respectively. [ X L R α , X U R α ] {\displaystyle [X_{LR}^{\alpha },X_{UR}^{\alpha }]} can be again divided into two sub-intervals [ X L R α , x ∗ ] {\displaystyle [X_{LR}^{\alpha },x^{}]} and [ x ∗ , X U R α ] {\displaystyle [x^{},X_{UR}^{\alpha }]} where x ∗ {\displaystyle x^{}} is the mode of the fuzzy variable. Then, the α-cut for the RFV for the same value of α, R F V α = [ X a α , X b α , X c α , X d α ] {\displaystyle RFV^{\alpha }=[X_{a}^{\alpha },X_{b}^{\alpha },X_{c}^{\alpha },X_{d}^{\alpha }]} can be defined by Using the above equations, the α-cuts are calculated for every value of α which gives us the final plot of the RFV. A random-fuzzy variable is capable of giving a complete picture of the random and systematic contributions to the total uncertainty from the α-cuts for any confidence level as the confidence level is nothing but 1-α. An example for the construction of the corresponding external membership function (rexternal) and the RFV from a random PD and an internal PD can be seen in the following figure.

  Read more →
• 

  International Conference on Autonomous Agents and Multiagent Systems

  The International Conference on Autonomous Agents and Multiagent Systems or AAMAS is the leading scientific conference for research in the areas of artificial intelligence, autonomous agents, and multiagent systems. It is annually organized by a non-profit organization called the International Foundation for Autonomous Agents and Multiagent Systems (IFAAMAS). == History == The International Conference on Autonomous Agents and Multiagent Systems (AAMAS) is a highly respected joint conference that provides a quality forum for discussing research in intelligent computational agents and their interactions. It is a merger of three major international conferences/workshops, namely the International Conference on Autonomous Agents (AGENTS), International Conference on Multi-Agent Systems (ICMAS), and International Workshop on Agent Theories, Architectures, and Languages (ATAL). ICMAS is itself a merger of three formative workshops, each with an attendance of fewer than 50 researchers. At a meeting during IJCAI-93 held in Chambery, France in August 1993, the leaders of the European Workshops on Modelling Autonomous Agents in a Multi-Agent World, the Asian MAAC Workshops, and the North American Distributed Artificial Intelligence Workshops (Victor Lesser, Michael N. Huhns, Les Gasser, Barbara Grosz, Nicholas Jennings, Michael Wooldridge, Gerhard Weiss, Mario Tokoro, and Toru Ishida) began the planning for a combined conference, which resulted in the first ICMAS in San Francisco, CA, USA in 1995, attended by more than 500 researchers. The AAMAS Conference is under the guidance and management of the International Foundation for Autonomous Agents and Multiagent Systems, which is incorporated as a 501(c)(3) non-profit organization in South Carolina, USA. == Current and previous conferences == 2024: Auckland, New Zealand (May 6-10) 2023: London, United Kingdom (May 29-June 1) 2022: Auckland, New Zealand (May 9–13) 2021: London, United Kingdom (May 3-May 7) 2020: Auckland, New Zealand (May 9–13) 2019: Montreal, Canada (May 13–17) 2018: Stockholm, Sweden (July 10–15) 2017: São Paulo, Brazil 2016: Singapore City, Singapore 2015: Istanbul, Turkey 2014: Paris, France 2013: Saint Paul, USA 2012: Valencia, Spain 2011: Taipei, Taiwan 2010: Toronto, Canada 2009: Budapest, Hungary 2008: Estoril, Portugal 2007: Honolulu, USA 2006: Hakodate, Japan 2005: Utrecht, The Netherlands 2004: New York, USA 2003: Melbourne, Australia 2002: Bologna, Italy == Activities == Besides the main program that consists of a main track, an industry and applications track, and a couple of special area tracks, AAMAS also hosts over 20 workshops (e.g., AOSE, COIN, DALT, ProMAS, to mention a few) and many tutorials. There is also a demonstration session and a doctoral symposium. Finally, each year AAMAS features a bunch of awards, most notably the IFAAMAS Influential Paper Award. It publishes proceedings which are available online.

  Read more →