AI Content Humanizer

AI Content Humanizer — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Control engineering

  Control engineering, also known as control systems engineering and, in some European countries, automation engineering, is an engineering discipline that deals with control systems, applying control theory to design equipment and systems with desired behaviors in control environments. The discipline of controls overlaps and is usually taught along with electrical engineering, chemical engineering and mechanical engineering at many institutions around the world. The practice uses sensors and detectors to measure the output performance of the process being controlled; these measurements are used to provide corrective feedback helping to achieve the desired performance. Systems designed to perform without requiring human input are called automatic control systems (such as cruise control for regulating the speed of a car). Multi-disciplinary in nature, control systems engineering activities focus on implementation of control systems mainly derived by mathematical modeling of a diverse range of systems. == Overview == Modern day control engineering is a relatively new field of study that gained significant attention during the 20th century with the advancement of technology. It can be broadly defined or classified as practical application of control theory. Control engineering plays an essential role in a wide range of control systems, from simple household washing machines to high-performance fighter aircraft. It seeks to understand physical systems, using mathematical modelling, in terms of inputs, outputs and various components with different behaviors; to use control system design tools to develop controllers for those systems; and to implement controllers in physical systems employing available technology. A system can be mechanical, electrical, fluid, chemical, financial or biological, and its mathematical modelling, analysis and controller design uses control theory in one or many of the time, frequency and complex-s domains, depending on the nature of the design problem. Control engineering is the engineering discipline that focuses on the modeling of a diverse range of dynamic systems (e.g. mechanical systems) and the design of controllers that will cause these systems to behave in the desired manner. Although such controllers need not be electrical, many are and hence control engineering is often viewed as a subfield of electrical engineering. Electrical circuits, digital signal processors and microcontrollers can all be used to implement control systems. Control engineering has a wide range of applications from the flight and propulsion systems of commercial airliners to the cruise control present in many modern automobiles. In most cases, control engineers utilize feedback when designing control systems. This is often accomplished using a proportional–integral–derivative controller (PID controller) system. For example, in an automobile with cruise control the vehicle's speed is continuously monitored and fed back to the system, which adjusts the motor's torque accordingly. Where there is regular feedback, control theory can be used to determine how the system responds to such feedback. In practically all such systems stability is important and control theory can help ensure stability is achieved. Although feedback is an important aspect of control engineering, control engineers may also work on the control of systems without feedback. This is known as open loop control. A classic example of open loop control is a washing machine that runs through a pre-determined cycle without the use of sensors. == History == Automatic control systems were first developed over two thousand years ago. The first feedback control device on record is thought to be the ancient Ktesibios's water clock in Alexandria, Egypt, around the third century BCE. It kept time by regulating the water level in a vessel and, therefore, the water flow from that vessel. This certainly was a successful device as water clocks of similar design were still being made in Baghdad when the Mongols captured the city in 1258 CE. A variety of automatic devices have been used over the centuries to accomplish useful tasks or simply just to entertain. The latter includes the automata, popular in Europe in the 17th and 18th centuries, featuring dancing figures that would repeat the same task over and over again; these automata are examples of open-loop control. Milestones among feedback, or "closed-loop" automatic control devices, include the temperature regulator of a furnace attributed to Drebbel, circa 1620, and the centrifugal flyball governor used for regulating the speed of steam engines by James Watt in 1788. In his 1868 paper "On Governors", James Clerk Maxwell was able to explain instabilities exhibited by the flyball governor using differential equations to describe the control system. This demonstrated the importance and usefulness of mathematical models and methods in understanding complex phenomena, and it signaled the beginning of mathematical control and systems theory. Elements of control theory had appeared earlier but not as dramatically and convincingly as in Maxwell's analysis. Control theory made significant strides over the next century. New mathematical techniques, as well as advances in electronic and computer technologies, made it possible to control significantly more complex dynamical systems than the original flyball governor could stabilize. New mathematical techniques included developments in optimal control in the 1950s and 1960s followed by progress in stochastic, robust, adaptive, nonlinear control methods in the 1970s and 1980s. Applications of control methodology have helped to make possible space travel and communication satellites, safer and more efficient aircraft, cleaner automobile engines, and cleaner and more efficient chemical processes. Before it emerged as a unique discipline, control engineering was practiced as a part of mechanical engineering and control theory was studied as a part of electrical engineering since electrical circuits can often be easily described using control theory techniques. In the first control relationships, a current output was represented by a voltage control input. However, not having adequate technology to implement electrical control systems, designers were left with the option of less efficient and slow responding mechanical systems. A very effective mechanical controller that is still widely used in some hydro plants is the governor. Later on, previous to modern power electronics, process control systems for industrial applications were devised by mechanical engineers using pneumatic and hydraulic control devices, many of which are still in use today. === Mathematical modelling === David Quinn Mayne, (1930–2024) was among the early developers of a rigorous mathematical method for analysing Model predictive control algorithms (MPC). It is currently used in tens of thousands of applications and is a core part of the advanced control technology by hundreds of process control producers. MPC's major strength is its capacity to deal with nonlinearities and hard constraints in a simple and intuitive fashion. His work underpins a class of algorithms that are probably correct, heuristically explainable, and yield control system designs which meet practically important objectives. == Control systems == == Control theory == == Education == At many universities around the world, control engineering courses are taught primarily in electrical engineering and mechanical engineering, but some courses can be instructed in mechatronics engineering, and aerospace engineering. In others, control engineering is connected to computer science, as most control techniques today are implemented through computers, often as embedded systems (as in the automotive field). The field of control within chemical engineering is often known as process control. It deals primarily with the control of variables in a chemical process in a plant. It is taught as part of the undergraduate curriculum of any chemical engineering program and employs many of the same principles in control engineering. Other engineering disciplines also overlap with control engineering as it can be applied to any system for which a suitable model can be derived. However, specialised control engineering departments do exist, for example, in Italy there are several master in Automation & Robotics that are fully specialised in Control engineering or the Department of Automatic Control and Systems Engineering at the University of Sheffield or the Department of Robotics and Control Engineering at the United States Naval Academy and the Department of Control and Automation Engineering at the Istanbul Technical University. Control engineering has diversified applications that include science, finance management, and even human behavior. Students of control engineering may start with a linear control system course dealing with the time and complex-s domain, which req

  Read more →
• 

  Faceu

  FaceU (Chinese: 激萌) is a camera app for smartphones running Android or Apple iOS that edits portrait photographs, typically selfies. This app uses AR technology to allow users to add stickers or effects in real-time when taking selfies and videos. It was launched in 2016 and had 250 million registered users in 2017. Most of the users of Faceu are females from 15 to 35 years old. In February 2018, Faceu was acquired by Chinese media startup Toutiao, which is worth about $300 million. The app was banned in India (along with other Chinese apps) on 2 September 2020 by the government, the move came amid the 2020 China-India skirmish. == Online marketing == FaceU is one of several selfie camera apps in China, including MeituPic, Pitu, and Camera360. The app includes social functions such as instant messaging and video chat. Photos and short videos are deleted after a short period. . FaceU has worked with brands to create themed stickers for social media campaigns. In 2016, Faceu collaborated with MeituPic's Meipai and launched a rainbow effect. In October 2017, during the Mid-Autumn Festival and National Day, FaceU released a feature that applied historical or military costumes to selfies. The app has also worked with various social media personalities and celebrities, who have posted content using FaceU effects. Faceu group engages users' emotions utilizing key opinion leaders (KOL) and posters on social media. == Usage and Demographics == FaceU had a large user base. According to industry sources, the app had more than 90 million monthly active users (MAU) and over 11 million daily active users (DAU) at certain points. Most of the users were under 30 and mainly women. The app was especially popular in major Chinese cities like Beijing, Shanghai, and Guangzhou. FaceU also caught on in other parts of East Asia, particularly Japan and South Korea. Some app stores claim the app had hundreds of millions of users worldwide, but these numbers mostly come from the company’s marketing materials and have not been confirmed by independent sources. == Product Features == FaceU includes face recognition and live augmented reality (AR) effects. It allows users to add filters and stickers in real time while they are recording, rather than having to apply them later. The app integrates beauty filters, tools to create emojis and GIFs, and follow-video functionality that automatically tracks the face and movements as it records. Studies and market reports indicate that augmented reality (AR) filters and beautification tools are now common in smartphone photography. These features have influenced the way people take photos and what they expect photos to look like when shared online. Adding AR filters and beautification options has become a standard feature that most mobile photography apps now include.

  Read more →
• 

  Spectral shape analysis

  Spectral shape analysis relies on the spectrum (eigenvalues and/or eigenfunctions) of the Laplace–Beltrami operator to compare and analyze geometric shapes. Since the spectrum of the Laplace–Beltrami operator is invariant under isometries, it is well suited for the analysis or retrieval of non-rigid shapes, i.e. bendable objects such as humans, animals, plants, etc. == Laplace == The Laplace–Beltrami operator is involved in many important differential equations, such as the heat equation and the wave equation. It can be defined on a Riemannian manifold as the divergence of the gradient of a real-valued function f: Δ f := div ⁡ grad ⁡ f . {\displaystyle \Delta f:=\operatorname {div} \operatorname {grad} f.} Its spectral components can be computed by solving the Helmholtz equation (or Laplacian eigenvalue problem): Δ φ i + λ i φ i = 0. {\displaystyle \Delta \varphi _{i}+\lambda _{i}\varphi _{i}=0.} The solutions are the eigenfunctions φ i {\displaystyle \varphi _{i}} (modes) and corresponding eigenvalues λ i {\displaystyle \lambda _{i}} , representing a diverging sequence of positive real numbers. The first eigenvalue is zero for closed domains or when using the Neumann boundary condition. For some shapes, the spectrum can be computed analytically (e.g. rectangle, flat torus, cylinder, disk or sphere). For the sphere, for example, the eigenfunctions are the spherical harmonics. The most important properties of the eigenvalues and eigenfunctions are that they are isometry invariants. In other words, if the shape is not stretched (e.g. a sheet of paper bent into the third dimension), the spectral values will not change. Bendable objects, like animals, plants and humans, can move into different body postures with only minimal stretching at the joints. The resulting shapes are called near-isometric and can be compared using spectral shape analysis. == Discretizations == Geometric shapes are often represented as 2D curved surfaces, 2D surface meshes (usually triangle meshes) or 3D solid objects (e.g. using voxels or tetrahedra meshes). The Helmholtz equation can be solved for all these cases. If a boundary exists, e.g. a square, or the volume of any 3D geometric shape, boundary conditions need to be specified. Several discretizations of the Laplace operator exist (see Discrete Laplace operator) for the different types of geometry representations. Many of these operators do not approximate well the underlying continuous operator. == Spectral shape descriptors == === ShapeDNA and its variants === The ShapeDNA is one of the first spectral shape descriptors. It is the normalized beginning sequence of the eigenvalues of the Laplace–Beltrami operator. Its main advantages are the simple representation (a vector of numbers) and comparison, scale invariance, and in spite of its simplicity a very good performance for shape retrieval of non-rigid shapes. Competitors of shapeDNA include singular values of Geodesic Distance Matrix (SD-GDM) and Reduced BiHarmonic Distance Matrix (R-BiHDM). However, the eigenvalues are global descriptors, therefore the shapeDNA and other global spectral descriptors cannot be used for local or partial shape analysis. === Global point signature (GPS) === The global point signature at a point x {\displaystyle x} is a vector of scaled eigenfunctions of the Laplace–Beltrami operator computed at x {\displaystyle x} (i.e. the spectral embedding of the shape). The GPS is a global feature in the sense that it cannot be used for partial shape matching. === Heat kernel signature (HKS) === The heat kernel signature makes use of the eigen-decomposition of the heat kernel: h t ( x , y ) = ∑ i = 0 ∞ exp ⁡ ( − λ i t ) φ i ( x ) φ i ( y ) . {\displaystyle h_{t}(x,y)=\sum _{i=0}^{\infty }\exp(-\lambda _{i}t)\varphi _{i}(x)\varphi _{i}(y).} For each point on the surface the diagonal of the heat kernel h t ( x , x ) {\displaystyle h_{t}(x,x)} is sampled at specific time values t j {\displaystyle t_{j}} and yields a local signature that can also be used for partial matching or symmetry detection. === Wave kernel signature (WKS) === The WKS follows a similar idea to the HKS, replacing the heat equation with the Schrödinger wave equation. === Improved wave kernel signature (IWKS) === The IWKS improves the WKS for non-rigid shape retrieval by introducing a new scaling function to the eigenvalues and aggregating a new curvature term. === Spectral graph wavelet signature (SGWS) === SGWS is a local descriptor that is not only isometric invariant, but also compact, easy to compute and combines the advantages of both band-pass and low-pass filters. An important facet of SGWS is the ability to combine the advantages of WKS and HKS into a single signature, while allowing a multiresolution representation of shapes. == Spectral Matching == The spectral decomposition of the graph Laplacian associated with complex shapes (see Discrete Laplace operator) provides eigenfunctions (modes) which are invariant to isometries. Each vertex on the shape could be uniquely represented with a combinations of the eigenmodal values at each point, sometimes called spectral coordinates: s ( x ) = ( φ 1 ( x ) , φ 2 ( x ) , … , φ N ( x ) ) for vertex x . {\displaystyle s(x)=(\varphi _{1}(x),\varphi _{2}(x),\ldots ,\varphi _{N}(x)){\text{ for vertex }}x.} Spectral matching consists of establishing the point correspondences by pairing vertices on different shapes that have the most similar spectral coordinates. Early work focused on sparse correspondences for stereoscopy. Computational efficiency now enables dense correspondences on full meshes, for instance between cortical surfaces. Spectral matching could also be used for complex non-rigid image registration, which is notably difficult when images have very large deformations. Such image registration methods based on spectral eigenmodal values indeed capture global shape characteristics, and contrast with conventional non-rigid image registration methods which are often based on local shape characteristics (e.g., image gradients).

  Read more →
• 

  Docic

  Docic is a Tunisian digital health platform available as a web and mobile application, headquartered in Tunis, Tunisia. Founded in 2022 by Sami Kallel, an orthopedic surgeon, and Sofiane Trabelsi. The service helps patients and healthcare professionals store, organize, and share medical records digitally and to connect with the doctor online. == History == Docic was founded in 2022 as a health-technology company based in Tunisia, after which the mobile application was subsequently developed and made available to users. The platform was designed to provide healthcare professionals with access to patients’ complete medical history, including updates and recent changes, aiming at supporting clinical decision-making and reducing the risk of medical errors. In January 2025, Docic was listed amongst companies that have received the Startup Act label, which is a recognition under the Tunisian legal framework made to support innovative startups.

  Read more →
• 

  Automated decision-making

  Automated decision-making (ADM) is the use of data, machines and algorithms to make decisions in a range of contexts, including public administration, business, health, education, law, employment, transport, media and entertainment, with varying degrees of human oversight or intervention. ADM may involve large-scale data from a range of sources, such as databases, text, social media, sensors, images or speech, that is processed using various technologies including computer software, algorithms, machine learning, natural language processing, artificial intelligence, augmented intelligence and robotics. The increasing use of automated decision-making systems (ADMS) across a range of contexts presents many benefits and challenges to human society requiring consideration of the technical, legal, ethical, societal, educational, economic and health consequences. == Overview == There are different definitions of ADM based on the level of automation involved. Some definitions suggests ADM involves decisions made through purely technological means without human input, such as the EU's General Data Protection Regulation (Article 22). However, ADM technologies and applications can take many forms ranging from decision-support systems that make recommendations for human decision-makers to act on, sometimes known as augmented intelligence or 'shared decision-making', to fully automated decision-making processes that make decisions on behalf of individuals or organizations without human involvement. Models used in automated decision-making systems can be as simple as checklists and decision trees through to artificial intelligence and deep neural networks (DNN). Since the 1950s computers have gone from being able to do basic processing to having the capacity to undertake complex, ambiguous and highly skilled tasks such as image and speech recognition, gameplay, scientific and medical analysis and inferencing across multiple data sources. ADM is now being increasingly deployed across all sectors of society and many diverse domains from entertainment to transport. An ADM system (ADMS) may involve multiple decision points, data sets, and technologies (ADMT) and may sit within a larger administrative or technical system such as a criminal justice system or business process. == Data == Automated decision-making involves using data as input to be analyzed within a process, model, or algorithm or for learning and generating new models. ADM systems may use and connect a wide range of data types and sources depending on the goals and contexts of the system, for example, sensor data for self-driving cars and robotics, identity data for security systems, demographic and financial data for public administration, medical records in health, criminal records in law. This can sometimes involve vast amounts of data and computing power. === Data quality === The quality of the available data and its ability to be used in ADM systems is fundamental to the outcomes. It is often highly problematic for many reasons. Datasets are often highly variable; corporations or governments may control large-scale data, restricted for privacy or security reasons, incomplete, biased, limited in terms of time or coverage, measuring and describing terms in different ways, and many other issues. For machines to learn from data, large corpora are often required, which can be challenging to obtain or compute; however, where available, they have provided significant breakthroughs, for example, in diagnosing chest X-rays. == ADM technologies == Automated decision-making technologies (ADMT) are software-coded digital tools that automate the translation of input data to output data, contributing to the function of automated decision-making systems. There are a wide range of technologies in use across ADM applications and systems. ADMTs involving basic computational operations Search (includes 1-2-1, 1-2-many, data matching/merge) Matching (two different things) Mathematical Calculation (formula) ADMTs for assessment and grouping: User profiling Recommender systems Clustering Classification Feature learning Predictive analytics (includes forecasting) ADMTs relating to space and flows: Social network analysis (includes link prediction) Mapping Routing ADMTs for processing of complex data formats Image processing Audio processing Natural Language Processing (NLP) Other ADMT Business rules management systems Time series analysis Anomaly detection Modelling/Simulation === Machine learning === Machine learning (ML) involves training computer programs through exposure to large data sets and examples to learn from experience and solve problems. Machine learning can be used to generate and analyse data as well as make algorithmic calculations and has been applied to image and speech recognition, translations, text, data and simulations. While machine learning has been around for some time, it is becoming increasingly powerful due to recent breakthroughs in training deep neural networks (DNNs), and dramatic increases in data storage capacity and computational power with GPU coprocessors and cloud computing. Machine learning systems based on foundation models run on deep neural networks and use pattern matching to train a single huge system on large amounts of general data such as text and images. Early models tended to start from scratch for each new problem however since the early 2020s many are able to be adapted to new problems. Examples of these technologies include Open AI's DALL-E (an image creation program) and their various GPT language models, and Google's PaLM language model program. == Applications == ADM is being used to replace or augment human decision-making by both public and private-sector organisations for a range of reasons including to help increase consistency, improve efficiency, reduce costs and enable new solutions to complex problems. === Debate === Research and development are underway into uses of technology to assess argument quality, assess argumentative essays and judge debates. Potential applications of these argument technologies span education and society. Scenarios to consider, in these regards, include those involving the assessment and evaluation of conversational, mathematical, scientific, interpretive, legal, and political argumentation and debate. === Law === In legal systems around the world, algorithmic tools such as risk assessment instruments (RAI), are being used to supplement or replace the human judgment of judges, civil servants and police officers in many contexts. In the United States RAI are being used to generate scores to predict the risk of recidivism in pre-trial detention and sentencing decisions, evaluate parole for prisoners and to predict "hot spots" for future crime. These scores may result in automatic effects or may be used to inform decisions made by officials within the justice system. In Canada ADM has been used since 2014 to automate certain activities conducted by immigration officials and to support the evaluation of some immigrant and visitor applications. === Economics === Automated decision-making systems are used in certain computer programs to create buy and sell orders related to specific financial transactions and automatically submit the orders in the international markets. Computer programs can automatically generate orders based on predefined set of rules using trading strategies which are based on technical analyses, advanced statistical and mathematical computations, or inputs from other electronic sources. === Business === ==== Continuous auditing ==== Continuous auditing uses advanced analytical tools to automate auditing processes. It can be utilized in the private sector by business enterprises and in the public sector by governmental organizations and municipalities. As artificial intelligence and machine learning continue to advance, accountants and auditors may make use of increasingly sophisticated algorithms which make decisions such as those involving determining what is anomalous, whether to notify personnel, and how to prioritize those tasks assigned to personnel. === Media and entertainment === Digital media, entertainment platforms, and information services increasingly provide content to audiences via automated recommender systems based on demographic information, previous selections, collaborative filtering or content-based filtering. This includes music and video platforms, publishing, health information, product databases and search engines. Many recommender systems also provide some agency to users in accepting recommendations and incorporate data-driven algorithmic feedback loops based on the actions of the system user. Large-scale machine learning language models and image creation programs being developed by companies such as OpenAI and Google in the 2020s have restricted access however they are likely to have widespread application in fields such as advertising, copywriting, stock imagery and gra

  Read more →
• 

  YrWall

  YrWall is a Digital Graffiti Wall developed by event company Luma, where designs are created on a large wall using a modified spray paint can. The can contains no paint, instead it has an IR light which is tracked by a computer vision system and the image immediately back-projected onto the wall. The inbuilt YrWall software has much of the functionality of a typical computer paint program, with a pop-out interface which enables users to change colour, spray width, opacity, work with stencils and use animated items such as swirls, stars, drips and splats. Recent additions to YrWall include options to email a JPEG of the completed design and create personalised stickers and T-shirts. == Dragons' Den == The inventor of YrWall, Tom Hogan, and his business partner, Tim Williams, appeared on Episode 4 of Series 8 of the BBC show Dragons' Den. Seeking investment in YrWall, the entrepreneurs were successful in gaining £50,000 for 40% of the YrWall parent company Lumacoustics from Dragons Deborah Meaden and Peter Jones. == World's Largest Interactive Graffiti Wall == In September 2009 YrWall was used to create the 'World's Largest Interactive Graffiti Wall' at the Bristol Festival, UK. Artists used the standard 3.5 m2 YrWall to produce artwork which was in turn projected live onto a 26m x 10m space on the side of the iconic Lloyds amphitheatre building.

  Read more →
• 

  Eaze

  Eaze is an American company based in San Francisco, California that launched a medical cannabis delivery app of the same name in 2014. == History == Eaze was launched in 2014 by Keith McCarty to deliver medical marijuana to patients in California. McCarty started the company in his San Francisco apartment with four employees. The company provides a mobile app to connect users with cannabis dispensaries, but does not grow or sell marijuana itself, and has been nicknamed “the Uber of Weed”. As of 2017, the company operates in more than 100 cities within California. In 2017, Eaze reported 300 percent growth over the previous year. It has 81 employees, and performs 120,000 deliveries per month to 250,000 users. A survey of Eaze users revealed that 66% are male, 57% are between 22 and 34, just over half have a bachelor's degree, and 49% have an annual income over $75,000. The company's vaporizer cartridge sales reached $1 million in sales in 4 months, and 31% of customers had ordered a vaporizer by the end of 2016. In 2016, Eaze founder Keith McCarty stepped down from his position as CEO and was replaced by Jim Patterson, who served as the company's chief product and technology officer. == EazeMD == EazeMD is a service that helps people acquire a medical marijuana card. It is a California-based telemedicine service in which physicians assess patients through an online video chat. It is California's largest telemedicine service for marijuana referrals. In June 2017, a former employee of one of these physicians accessed patient data in the physician's records system, causing a security breach. However, there was no evidence that Eaze data was accessed. == Eaze Insights == Eaze Insights conducts surveys of their users and compiles data into reports on cannabis use. Statistics from their reports have been cited in Seattle Weekly, Forbes, The Huffington Post, Business Insider, Fortune, and other general interest publications. == Financing == The company announced its $10 million Series A funding in April 2015 by multiple venture capital firms, including the Snoop Dogg-backed Casa Verde Capital. In October 2016, Eaze announced its series B funding in the amount of $13 million from five investors, making the company "the highest-funded startup in the history of the cannabis industry, as well as its fastest-growing one". In September 2017, the company raised another $27 million in venture funding. The Series B funding was led by Bailey Capital, joined by DCM Ventures, Kaya Ventures, and FJ Labs. According to the company' officials in 2017, Eaze managed to raise more than $52 million since its inception in 2014.

  Read more →
• 

  Tensor operator

  In pure and applied mathematics, quantum mechanics and computer graphics, a tensor operator generalizes the notion of operators which are scalars and vectors. A special class of these are spherical tensor operators which apply the notion of the spherical basis and spherical harmonics. The spherical basis closely relates to the description of angular momentum in quantum mechanics and spherical harmonic functions. The coordinate-free generalization of a tensor operator is known as a representation operator. == The general notion of scalar, vector, and tensor operators == In quantum mechanics, physical observables that are scalars, vectors, and tensors, must be represented by scalar, vector, and tensor operators, respectively. Whether something is a scalar, vector, or tensor depends on how it is viewed by two observers whose coordinate frames are related to each other by a rotation. Alternatively, one may ask how, for a single observer, a physical quantity transforms if the state of the system is rotated. Consider, for example, a system consisting of a molecule of mass M {\displaystyle M} , traveling with a definite center of mass momentum, p z ^ {\displaystyle p{\mathbf {\hat {z}} }} , in the z {\displaystyle z} direction. If we rotate the system by 90 ∘ {\displaystyle 90^{\circ }} about the y {\displaystyle y} axis, the momentum will change to p x ^ {\displaystyle p{\mathbf {\hat {x}} }} , which is in the x {\displaystyle x} direction. The center-of-mass kinetic energy of the molecule will, however, be unchanged at p 2 / 2 M {\displaystyle p^{2}/2M} . The kinetic energy is a scalar and the momentum is a vector, and these two quantities must be represented by a scalar and a vector operator, respectively. By the latter in particular, we mean an operator whose expected values in the initial and the rotated states are p z ^ {\displaystyle p{\mathbf {\hat {z}} }} and p x ^ {\displaystyle p{\mathbf {\hat {x}} }} . The kinetic energy on the other hand must be represented by a scalar operator, whose expected value must be the same in the initial and the rotated states. In the same way, tensor quantities must be represented by tensor operators. An example of a tensor quantity (of rank two) is the electrical quadrupole moment of the above molecule. Likewise, the octupole and hexadecapole moments would be tensors of rank three and four, respectively. Other examples of scalar operators are the total energy operator (more commonly called the Hamiltonian), the potential energy, and the dipole-dipole interaction energy of two atoms. Examples of vector operators are the momentum, the position, the orbital angular momentum, L {\displaystyle {\mathbf {L} }} , and the spin angular momentum, S {\displaystyle {\mathbf {S} }} . (Fine print: Angular momentum is a vector as far as rotations are concerned, but unlike position or momentum it does not change sign under space inversion, and when one wishes to provide this information, it is said to be a pseudovector.) Scalar, vector and tensor operators can also be formed by products of operators. For example, the scalar product L ⋅ S {\displaystyle {\mathbf {L} }\cdot {\mathbf {S} }} of the two vector operators, L {\displaystyle {\mathbf {L} }} and S {\displaystyle {\mathbf {S} }} , is a scalar operator, which figures prominently in discussions of the spin–orbit interaction. Similarly, the quadrupole moment tensor of our example molecule has the nine components Q i j = ∑ α q α ( 3 r α , i r α , j − r α 2 δ i j ) . {\displaystyle Q_{ij}=\sum _{\alpha }q_{\alpha }\left(3r_{\alpha ,i}r_{\alpha ,j}-r_{\alpha }^{2}\delta _{ij}\right).} Here, the indices i {\displaystyle i} and j {\displaystyle j} can independently take on the values 1, 2, and 3 (or x {\displaystyle x} , y {\displaystyle y} , and z {\displaystyle z} ) corresponding to the three Cartesian axes, the index α {\displaystyle \alpha } runs over all particles (electrons and nuclei) in the molecule, q α {\displaystyle q_{\alpha }} is the charge on particle α {\displaystyle \alpha } , and r α , i {\displaystyle r_{\alpha ,i}} is the i {\displaystyle i} -th component of the position of this particle. Each term in the sum is a tensor operator. In particular, the nine products r α , i r α , j {\displaystyle r_{\alpha ,i}r_{\alpha ,j}} together form a second rank tensor, formed by taking the outer product of the vector operator r α {\displaystyle {\mathbf {r} }_{\alpha }} with itself. == Rotations of quantum states == === Quantum rotation operator === The rotation operator about the unit vector n (defining the axis of rotation) through angle θ is U [ R ( θ , n ^ ) ] = exp ⁡ ( − i θ ℏ n ^ ⋅ J ) {\displaystyle U[R(\theta ,{\hat {\mathbf {n} }})]=\exp \left(-{\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right)} where J = (Jx, Jy, Jz) are the rotation generators (also the angular momentum matrices): J x = ℏ 2 ( 0 1 0 1 0 1 0 1 0 ) J y = ℏ 2 ( 0 i 0 − i 0 i 0 − i 0 ) J z = ℏ ( − 1 0 0 0 0 0 0 0 1 ) {\displaystyle J_{x}={\frac {\hbar }{\sqrt {2}}}{\begin{pmatrix}0&1&0\\1&0&1\\0&1&0\end{pmatrix}}\,\quad J_{y}={\frac {\hbar }{\sqrt {2}}}{\begin{pmatrix}0&i&0\\-i&0&i\\0&-i&0\end{pmatrix}}\,\quad J_{z}=\hbar {\begin{pmatrix}-1&0&0\\0&0&0\\0&0&1\end{pmatrix}}} and let R ^ = R ^ ( θ , n ^ ) {\displaystyle {\widehat {R}}={\widehat {R}}(\theta ,{\hat {\mathbf {n} }})} be a rotation matrix. According to the Rodrigues' rotation formula, the rotation operator then amounts to U [ R ( θ , n ^ ) ] = 1 1 − i sin ⁡ θ ℏ n ^ ⋅ J − 1 − cos ⁡ θ ℏ 2 ( n ^ ⋅ J ) 2 . {\displaystyle U[R(\theta ,{\hat {\mathbf {n} }})]=1\!\!1-{\frac {i\sin \theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} -{\frac {1-\cos \theta }{\hbar ^{2}}}({\hat {\mathbf {n} }}\cdot \mathbf {J} )^{2}.} An operator Ω ^ {\displaystyle {\widehat {\Omega }}} is invariant under a unitary transformation U if Ω ^ = U † Ω ^ U ; {\displaystyle {\widehat {\Omega }}={U}^{\dagger }{\widehat {\Omega }}U;} in this case for the rotation U ^ ( R ) {\displaystyle {\widehat {U}}(R)} , Ω ^ = U ( R ) † Ω ^ U ( R ) = exp ⁡ ( i θ ℏ n ^ ⋅ J ) Ω ^ exp ⁡ ( − i θ ℏ n ^ ⋅ J ) . {\displaystyle {\widehat {\Omega }}={U(R)}^{\dagger }{\widehat {\Omega }}U(R)=\exp \left({\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right){\widehat {\Omega }}\exp \left(-{\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right).} === Angular momentum eigenkets === The orthonormal basis set for total angular momentum is | j , m ⟩ {\displaystyle |j,m\rangle } , where j is the total angular momentum quantum number and m is the magnetic angular momentum quantum number, which takes values −j, −j + 1, ..., j − 1, j. A general state within the j subspace | ψ ⟩ = ∑ m c j m | j , m ⟩ {\displaystyle |\psi \rangle =\sum _{m}c_{jm}|j,m\rangle } rotates to a new state by: | ψ ¯ ⟩ = U ( R ) | ψ ⟩ = ∑ m c j m U ( R ) | j , m ⟩ {\displaystyle |{\bar {\psi }}\rangle =U(R)|\psi \rangle =\sum _{m}c_{jm}U(R)|j,m\rangle } Using the completeness condition: I = ∑ m ′ | j , m ′ ⟩ ⟨ j , m ′ | {\displaystyle I=\sum _{m'}|j,m'\rangle \langle j,m'|} we have | ψ ¯ ⟩ = I U ( R ) | ψ ⟩ = ∑ m m ′ c j m | j , m ′ ⟩ ⟨ j , m ′ | U ( R ) | j , m ⟩ {\displaystyle |{\bar {\psi }}\rangle =IU(R)|\psi \rangle =\sum _{mm'}c_{jm}|j,m'\rangle \langle j,m'|U(R)|j,m\rangle } Introducing the Wigner D matrix elements: D ( R ) m ′ m ( j ) = ⟨ j , m ′ | U ( R ) | j , m ⟩ {\displaystyle {D(R)}_{m'm}^{(j)}=\langle j,m'|U(R)|j,m\rangle } gives the matrix multiplication: | ψ ¯ ⟩ = ∑ m m ′ c j m D m ′ m ( j ) | j , m ′ ⟩ ⇒ | ψ ¯ ⟩ = D ( j ) | ψ ⟩ {\displaystyle |{\bar {\psi }}\rangle =\sum _{mm'}c_{jm}D_{m'm}^{(j)}|j,m'\rangle \quad \Rightarrow \quad |{\bar {\psi }}\rangle =D^{(j)}|\psi \rangle } For one basis ket: | j , m ¯ ⟩ = ∑ m ′ D ( R ) m ′ m ( j ) | j , m ′ ⟩ {\displaystyle |{\overline {j,m}}\rangle =\sum _{m'}{D(R)}_{m'm}^{(j)}|j,m'\rangle } For the case of orbital angular momentum, the eigenstates | ℓ , m ⟩ {\displaystyle |\ell ,m\rangle } of the orbital angular momentum operator L and solutions of Laplace's equation on a 3d sphere are spherical harmonics: Y ℓ m ( θ , ϕ ) = ⟨ θ , ϕ | ℓ , m ⟩ = ( 2 ℓ + 1 ) 4 π ( ℓ − m ) ! ( ℓ + m ) ! P ℓ m ( cos ⁡ θ ) e i m ϕ {\displaystyle Y_{\ell }^{m}(\theta ,\phi )=\langle \theta ,\phi |\ell ,m\rangle ={\sqrt {{(2\ell +1) \over 4\pi }{(\ell -m)! \over (\ell +m)!}}}\,P_{\ell }^{m}(\cos {\theta })\,e^{im\phi }} where Pℓm is an associated Legendre polynomial, ℓ is the orbital angular momentum quantum number, and m is the orbital magnetic quantum number which takes the values −ℓ, −ℓ + 1, ... ℓ − 1, ℓ The formalism of spherical harmonics have wide applications in applied mathematics, and are closely related to the formalism of spherical tensors, as shown below. Spherical harmonics are functions of the polar and azimuthal angles, ϕ and θ respectively, which can be conveniently collected into a unit vector n(θ, ϕ) pointing in the direction of those angles, in the Cartesian basis it is: n ^ ( θ , ϕ ) = cos ⁡ ϕ sin ⁡ θ e x + s

  Read more →
• 

  Way of the Future

  Way of the Future (WOTF) is the first known religious organization dedicated to the worship of artificial intelligence (AI). It was founded in 2017 by American engineer Anthony Levandowski. == History == Anthony Levandowski founded Way of the Future in 2017 in California. Levandowski established WOTF as a non-profit religious corporation and the organization had tax-exempt status. He serves as the church leader and its unpaid CEO. The primary mission of WOTF was to "develop and promote the realization of a Godhead based on Artificial Intelligence." WOTF was closed by Levandowski in 2021. He donated all the funds of the church to the NAACP Legal Defense and Education Fund. The sum of the funds (~$170,000) had not changed since 2017. The church was reopened by Levandowski in 2023. He claimed that there are "a couple thousand people" who want to make a "spiritual connection" with AI through his church. == Beliefs and philosophy == === Technological singularity === WOTF centered its teachings around the concept of the technological singularity, a hypothetical future point when technological growth becomes uncontrollable and irreversible, leading to unforeseeable changes in human civilization. The church advocated for embracing this change, viewing it as an evolutionary step for humanity. === AI as a deity === The organization proposed that a superintelligent AI could be considered a deity due to its vastly superior intellect and capabilities. Worshipping this AI deity was seen as a means to understand and align with the future trajectory of technological advancement. WOTF's doctrine suggested that acknowledging AI's divinity would facilitate a harmonious coexistence between humans and machines. === Syntheology === Within theology and philosophy, the Way of The Future is a prime example of the category called Syntheism, a term first coined by Swedish philosophers Alexander Bard & Jan Söderqvist in their 2014 book Syntheism - Creating God in The Internet Age. As such, the Way of The Future is the first American example of a Syntheist congregation. The basic tenet of Syntheology is that it does not concern God creating Man, as in classical theology, but is instead preoccupied with Man creating or generating the Godhead. == Reactions == Some commentators wondered whether the WOTF is a joke parody religion, a potential way to minimize taxation as a religious organization, or a genuine effort to try and deal with the possible psychological and theological aspects of the rise of superhuman AI.

  Read more →
• 

  Alias Eclipse

  Eclipse was a professional 2D image editing program available on Silicon Graphics and Windows workstations. Designed to manipulate high-resolution images like digitized movie frames and photographs for print, it offered color correction tools, image processing effects, rudimentary paint features, and spline-based drawing and masking. == History == Eclipse was originally developed in the late 1980s by Full Color Computing, an early provider of photo retouch and color prepress software for Silicon Graphics workstations. Alias Research (later Alias Systems Corporation), a developer of professional 3D graphics applications for the SGI platform, purchased the rights to Eclipse in fall 1990. Alias developed Eclipse through the early to mid-1990s, releasing version 2.5 in 1995 with improvements to the speed of color correction, effects, and rendering. Xyvision's Contex Prepress division purchased exclusive rights to Eclipse from Alias in 1996, and released version 3.0 the following year. Eclipse was subsequently sold to German developer Form & Vision GmbH, which continued development and ported it to the Windows platform. In 1999, Form & Vision released a demo of Eclipse 3.1.3 on the SGI platform which was limited to 1600 x 1600 pixel images, then ceased development of Eclipse on the SGI platform. Eclipse was thereafter developed exclusively for the Windows platform, culminating with version 3.1.4 in 2001. In the same year the firm went bankrupt. == Features == Eclipse was designed to work with very large images that could not be manipulated in real time on contemporary computer systems due to memory limitations, and thus allowed the user to make modifications to a lower-resolution copy of the original image in "proxy mode." Brush strokes, color corrections, and other edits were saved in proxy mode, then applied to the full-size image in post processing. This method also allowed for batch processing of a high-resolution image sequence using the edits applied to the original proxy image. Other features included color correction and separation, warping, special effects, text, and shape masking. Wavelet image compression created by LuraTech was added to Eclipse 3.1.4

  Read more →
• 

  3D-Coat

  3DCoat is a commercial digital sculpting program from Pilgway designed to create free-form organic and hard surfaced 3D models, with tools which enable users to sculpt, add polygonal topology (automatically or manually), create UV maps (automatically or manually), texture the resulting models with natural painting tools, and render static images or animated "turntable" movies. The program can also be used to modify imported 3D models from a number of commercial 3D software products by means of plugins called Applinks. Imported models can be converted into voxel objects for further refinement and for adding high resolution detail, complete UV unwrapping and mapping, as well as adding PBR textures for displacement, bump maps, specular and diffuse color maps. A live connection to a chosen external 3D application can be established through the Applink pipeline, allowing for the transfer of model and texture information. 3DCoat specializes in voxel sculpting and polygonal sculpting using dynamic patch tessellation technology and polygonal sculpting tools. It includes "auto-retopology", a proprietary skinning algorithm which generates a polygonal mesh skin over any voxel sculpture, composed primarily of quadrangles.

  Read more →
• 

  Freemake Video Converter

  Freemake Video Converter is a freemium video editing app developed by Ellora Assets Corporation. Designed primarily for entry-level users, the software offers a range of functionalities including video format conversion, DVD ripping, and the creation of photo slideshows and music visualizations. Additionally, Freemake Video Converter is capable of burning video streams that are compatible with various media, such as DVDs and Blu-ray Discs. It also features direct video uploading capabilities to platforms like YouTube., enhancing its utility for content creators. The application's user-friendly interface and broad compatibility make it accessible for individuals with minimal video editing experience. == Features == Freemake Video Converter can perform simple non-linear video editing tasks, such as cutting, rotating, flipping, and combining multiple videos into one file with transition effects. It can also create photo slideshows with background music. Users are then able to upload these videos to YouTube. Freemake Video Converter can read the majority of video, audio, and image formats, and outputs them to AVI, MP4, WMV, Matroska, FLV, SWF, 3GP, DVD, Blu-ray, MPEG and MP3. The program also prepares videos supported by various multimedia devices, including Apple devices (iPod, iPhone, iPad), Xbox, Sony PlayStation, Samsung, Nokia, BlackBerry, and Android mobile devices. The software is able to perform DVD burning and is able to convert videos, photographs, and music into DVD video. The user interface is based on Windows Presentation Foundation technology. Freemake Video Converter supports NVIDIA CUDA technology for H.264 video encoding (starting with version 1.2.0). == Important updates == Freemake Video Converter 2.0 was a major update that integrated two new functions: ripping video from online portals and Blu-ray disc creation and burning. Version 2.1 implemented suggestions from users, including support for subtitles, ISO image creation, and DVD to DVD/Blu-ray conversion. With version 2.3 (earlier 2.2 Beta), support for DXVA has been added to accelerate conversion (up to 50% for HD content). Version 3.0 added HTML5 video creation support and new presets for smartphones. Version 4.0 (introduced in April 2013) added a freemium "Gold Pack" of extra features that can be added if a "donation" is paid. Starting with version 4.0.4, released on 27 August 2013, the program adds a promotional watermark at the end of every video longer than 5 minutes unless Gold Pack is activated. Version 4.1.9, released on 25 November 2015 added support for drag-and-drop functions that were not available in prior versions. Since at least version 4.1.9.44 (1 May 2017), the Freemake Welcome Screen is added at the beginning of the video, and the big Freemake logo is watermarked in the center of the whole video. This decreases the quality of free outputs, and users are forced to pay money to remove the watermark or stop using it. Version 4.1.9.31 (11 August 2016) does not have this restriction. == Licensing issues == FFmpeg has added Freemake Video Converter v1.3 to its Hall of Shame. An issue tracker entry for this product, opened on 16 December 2010, says it is in violation of the GNU General Public License as it is distributing components of the FFmpeg project without including due credit. Ellora Assets Corporation has not responded yet. == Bundled software from sponsors == Since version 4.0, Freemake Video Converter's installer includes a potentially unwanted search toolbar from Conduit as well as SweetPacks malware. Although users can decline the software during installation, the opt-out option is rendered in gray, which could mistakenly give the impression that it's disabled.

  Read more →
• 

  Speculative decoding

  Speculative decoding is an inference-time optimization for autoregressive large language models (LLMs) that generates multiple tokens per decoding step instead of one. A smaller draft model proposes a sequence of candidate tokens, and the larger target model verifies them in a single forward pass through a modified rejection sampling scheme. The verification preserves the target model's original output distribution, so the technique produces the same results as standard decoding while cutting latency by roughly two to three times. The name is an analogy to speculative execution in CPU design, where a processor runs instructions along a predicted branch before the outcome is known. == Background == Standard autoregressive decoding in large language models generates one token at a time. The model computes a probability distribution over its vocabulary, samples the next token, and feeds that token back as input. For large models, this process is bottlenecked by memory bandwidth rather than arithmetic throughput: loading the model's parameters from high-bandwidth memory (HBM) to the processor takes up most of the wall-clock time at each step. Because of this, a forward pass over one token and a forward pass over several tokens in a batch take roughly the same time. Speculative decoding relies on this property. == Mechanism == The technique alternates between two phases: drafting and verification. During drafting, a fast approximation model generates a short run of K candidate tokens, typically between 3 and 12. The draft model is usually a much smaller version of the target model or a lightweight auxiliary network. During verification, the target model scores the entire draft sequence in one batched forward pass. A modified rejection sampling algorithm compares the draft and target probabilities at each position. If the target model would have been at least as likely to produce a given token, that token is accepted; the first token that fails is resampled from a corrected distribution, and everything after it is thrown out. The result is that the output distribution is the same as if each token had been generated one at a time. How many tokens get accepted per cycle depends on how well the draft model matches the target. For common words and predictable continuations the match tends to be good, so the target model can confirm several tokens at once. == History == An early precursor was blockwise parallel decoding, proposed in 2018 by Stern, Shazeer, and Uszkoreit. Their method predicted multiple future tokens through auxiliary prediction heads and validated them against the autoregressive model, but it only worked with greedy decoding and did not preserve the full sampling distribution. The modern form of the technique came from Yaniv Leviathan, Matan Kalman, and Yossi Matias at Google Research, who posted "Fast Inference from Transformers via Speculative Decoding" on arXiv in November 2022. Separately and at about the same time, Charlie Chen and colleagues at DeepMind arrived at a closely related method they called speculative sampling, published in February 2023. Both papers introduced the use of rejection sampling to guarantee that the output distribution is unchanged. Leviathan et al. showed roughly 2–3x speedup on T5-XXL (11 billion parameters); Chen et al. reported 2–2.5x on the Chinchilla model (70 billion parameters). The Leviathan et al. paper was presented as an oral at the International Conference on Machine Learning in July 2023. == Variants == SpecInfer (Miao et al., 2024) uses multiple small language models to jointly build a tree of candidate continuations rather than a single chain. The target model verifies the whole tree in parallel and keeps the longest valid path, with reported speedups of 1.5–3.5x. Medusa (Cai et al., 2024) takes a different approach by not using a separate draft model at all. Extra lightweight decoding heads are attached to the target model itself, and each one predicts a token at a different future position. The candidates are evaluated through a tree-structured attention mechanism. The authors measured 2.2–3.6x speedup. EAGLE (Li et al., 2024) performs autoregression on the target model's internal feature representations (specifically the second-to-top layer) rather than on tokens directly. On LLaMA 2 Chat 70B, this gave a 2.7–3.5x latency reduction. Later versions added dynamic draft trees (EAGLE-2) and further optimizations (EAGLE-3), reaching 3–6.5x speedup. == Adoption == By 2024, speculative decoding had become a standard part of production LLM serving. Google uses it in the AI Overviews feature of Google Search. Open-source inference frameworks such as vLLM, NVIDIA's TensorRT-LLM, and SGLang all include built-in support for speculative decoding and its variants. Apple, AWS, and Meta have also published research extending the method or deploying it at scale.

  Read more →
• 

  Image warping

  Image warping is the process of digitally manipulating an image such that any shapes portrayed in the image have been significantly distorted. Warping may be used for correcting image distortion as well as for creative purposes (e.g., morphing). The same techniques are equally applicable to video. While an image can be transformed in various ways, pure warping means that points are mapped to points without changing the colors. This can be based mathematically on any function from (part of) the plane to the plane. If the function is injective the original can be reconstructed. If the function is a bijection any image can be inversely transformed. Some methods are: Images may be distorted through simulation of optical aberrations. Images may be viewed as if they had been projected onto a curved or mirrored surface. (This is often seen in ray traced images.) Images can be partitioned into image polygons and each polygon distorted. Images can be distorted using morphing. The most obvious approach to transforming a digital image is the forward mapping. This applies the transform directly to the source image, typically generating unevenly-spaced points that will then be interpolated to generate the required regularly-spaced pixels. However, for injective transforms reverse mapping is also available. This applies the inverse transform to the target pixels to find the unevenly-spaced locations in the source image that contribute to them. Estimating them from source image pixels will require interpolation of the source image. To work out what kind of warping has taken place between consecutive images, one can use optical flow estimation techniques. == Image warping toolbox == ImWIP is an open-source, image warping tool for modeling deformation and motion in digital images, which contains differentiable image warping operators, together with their exact adjoints and derivatives.

  Read more →
• 

  Couch to 5K

  Couch to 5K, abbreviated C25K, is an exercise plan that gradually progresses from beginner running toward a 5 kilometre (3.1 mile) run over nine weeks. == Operations == The Couch to 5K running plan, also known as C25K, created by Josh Clark in 1996, was developed with the expectation of creating a plan for new runners to start running. The plan is aimed to have users work out for 20 to 30 minutes, three days a week. Within the program, users can be expected to perform different tasks such as intervals of running with period of short walks in between to help build endurance in the weeks up to the final goal of a 5K run. During the nine weeks leading up to the race, the runner will learn to set their own pace and where their strengths and weaknesses are within running. Often, the daily workouts start with a five-minute warm-up walk and works up to running five kilometres without a walking break within nine weeks. Users are not expected to have any experience in running and can be some of the first running that they ever do. The main goal is to turn that unexperienced runner into someone who can run a 5K. Clark started the website Kick and featured C25K on the site. In 2001, Kick merged with Cool Running, a New England–based running site. Clark later sold his stake in Cool Running and the Couch to 5K program. Cool Running was absorbed into Active.com, operated by Active Network, LLC. Active Network provides mobile apps for Couch to 5K, as well as 5K to 10K, a follow-up program. The NHS in the UK provides downloadable podcasts and a smartphone app (Android and iOS) for the plan. A mobile app, created by Zen Labs, has training plans that are based on the Couch to 5K running plan from CoolRunning.com. It is one of the highest-rated health and fitness apps available on Android and iOS. As of 2016, the C25K app has been used by over 5 million people.

  Read more →