AI Coding Scaffold

AI Coding Scaffold — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Plane Finder

Plane Finder is a United Kingdom-based real-time flight tracking service launched in 2009, that is able to show flight data globally. The data available includes flight numbers, how fast an aircraft is moving, its elevation and destination of travel. Several variants of the service are available as mobile apps including free, premium 3D and augmented reality versions. The flight tracking map and database can be accessed by web browsers. Plane Finder allows registered users to share their ADS-B and MLAT data via the Plane Finder ADS-B Client, available for macOS, Windows and Linux. Plane Finder supports VFR charts from NATS, and was the first major flight tracking app to introduce a replay feature, allowing users to replay flights dating back to 2011. == Flight tracking == Plane Finder collects data from its own global network of receivers, using the following sources. === Automatic dependent surveillance-broadcast (ADS-B) === A network of automatic dependent surveillance-broadcast (ADS-B) receivers gathers aircraft data such as callsign, position and speed. Plane Finder serves to supplement this data with additional information, including aircraft registration/tail number, departure airport, destination, artwork, and photographs. Plane Finder users can apply for an ADS-B receiver in exchange for their flight data. === Multilateration (MLAT) === To deliver aircraft position data where ADS-B is unavailable, Plane Finder uses multilateration (MLAT). Using three or more receivers running Plane Finder client software, monitoring the aircraft simultaneously, the aircraft’s position is calculated using receiver location and accurate timestamps. While European airspace is widely covered, only some parts of North American airspace are covered. === Federal Aviation Administration (FAA) feed === ADS-B is prevalent across Europe and Australia, but not in North America. Where MLAT or ADS-B data is unavailable, a feed from the Federal Aviation Administration provides flight information. The FAA feed covers United States and Canadian airspace, including bordering areas of the Atlantic and Pacific Oceans. === FLARM feed === Plane Finder collects data from a centralised FLARM feed, for monitoring small aircraft and gliders. == Flight data source == The Plane Finder website and database is widely used as an information source to support articles in the media. The Independent used Plane Finder flight tracking to demonstrate to readers the flight path of flight MT2706, which turned back as a result of last minute Egyptian government flight restrictions on 6 November 2015. The Independent also used Plane Finder information to demonstrate a timeline of the speed/altitude of flight 7K 9268, a Russian plane which crashed on 31 October 2015. The BBC cited Plane Finder in regard to the point at which at British Airways flight turned back to Heathrow Airport to make an emergency landing after smoke was seen coming from its engines. Plane Finder data has also been used to create original imagery for the media, such as the Washington Post, which used Plane Finder as a source to show flight patterns immediately after the Brussels bombings in March 2016.
Read more →
VoxForge

VoxForge is a free speech corpus and acoustic model repository for open source speech recognition engines. VoxForge was set up to collect transcribed speech to create a free GPL speech corpus in order to be uses with open source speech recognition engines. The speech audio files will be 'compiled' into acoustic models for use with open source speech recognition engines such as Julius, ISIP, and Sphinx and HTK (note: HTK has distribution restrictions). VoxForge has used LibriVox as a source of audio data since 2007.
Read more →
Robotics

Robotics is the interdisciplinary study and practice of the design, construction, operation, and use of robots. A roboticist is someone who specializes in robotics. Robotics usually combines four aspects of design work: a power source (e.g. a battery), mechanical construction, a control system (electrical circuits), and software (run by remote control or artificial intelligence). The goal of most robotics is to design machines that can assist humans in various fields, such as agriculture, construction, domestic work, food processing, inventory management, manufacturing, medicine, military, mining, space exploration, and transportation. Robots impact humans by displacing workers. Some expect this to occur at an increasing rate, leading to proposed solutions such as basic income. Robotics is itself a lucrative business that creates careers, especially for postgraduates. Roboticists often aim to create machines that seem to interface naturally with humans. The field is under active research and development, with areas of interest including robot kinematics and quantum robotics. == Design == Robotics usually combines four aspects of design work to create a robot: Power source: Potential energy sources include wired electricity, a battery, and/or petrol. Mechanical construction: A physical form or combination of forms is designed to functionally achieve tasks within a given range of environments. This can include locomotive elements such as wheels and caterpillar tracks, as well as hydraulic limbs and manipulators (e.g. hands). Control system: Electrical circuits (utilizing components such as diodes and transistors) are used to run software, govern motor movement, and read sensors. Software: A program is how a robot decides when or how to do something. Robotic programs can be run by remote control, artificial intelligence (AI), or a hybrid of the two. AI programming is an important part of robotic navigation and human–robot interaction. === Power source === Many different types of batteries can be used as a power source. Most are lead–acid batteries, which are safe and have relatively long shelf lives but are rather heavy compared to silver–cadmium batteries, which are much smaller in volume and much more expensive. Designing a battery-powered robot needs to take into account factors such as safety, cycle lifetime, and weight. Generators, often some type of internal combustion engine, can also be used, but are often mechanically complex and inefficient. Additionally, a tether could connect the robot to a power supply, saving weight and space, but requiring a cumbersome cable. Potential power sources include: Flywheel energy storage Hydraulics Nuclear Organic garbage (through anaerobic digestion) Pneumatics (compressed gases) Solar power === Mechanical construction === Actuators are the "muscles" of a robot, the parts which convert stored energy into movement. The most popular actuators are electric motors that rotate a wheel or gear and linear actuators that control factory robots. Most robots use electric motors—often brushed and brushless DC motors in portable robots or AC motors in industrial robots and computer numerical control machines—especially in systems with lighter loads and where the predominant form of motion is rotational. Meanwhile, linear actuators move in and out and often have quicker direction changes, particularly when large forces are needed, such as with industrial robotics. They are typically powered by oil or compressed air, but can also be powered by electricity, usually via a motor and a leadscrew. The mechanical rack and pinion is common. Recent alternatives to DC motors are piezoelectric motors, including ultrasonic motors, in which tiny piezoceramic elements vibrate many thousands of times per second, causing linear or rotary motion. One type uses the vibration of the piezo elements to step the motor in a circle or a straight line; another type uses the piezo elements to vibrate a nut or drive a screw. The advantages of these motors are nanometer resolution, speed, and force for their size. Series elastic actuation (SEA) relies on introducing intentional elasticity between the motor actuator and the load for robust force control. Due to the resultant lower reflected inertia, series elastic actuation improves safety during robot interactions or collisions. Further, it provides energy efficiency and shock absorption (mechanical filtering) while reducing excessive wear on the transmission and other components. This approach has successfully been employed in various robots, particularly advanced manufacturing robots and walking humanoid robots. The controller design of a series elastic actuator is most often performed within the passivity framework as it ensures the safety of interaction with unstructured environments. However, this framework suffers from stringent limitations imposed on the controller, which may impact performance. Pneumatic artificial muscles, also known as air muscles, are special tubes that expand (typically up to 42%) when air is forced inside them; they are used in some robot applications. Muscle wire, also known as shape memory alloy, is a material that contracts (under 5%) when electricity is applied; they have been used for some small robots. Electroactive polymers are a plastic material that can contract substantially (up to 380% activation strain) from electricity and have been used in the facial muscles and arms of humanoid robots, as well as to enable new robots to float, fly, swim or walk. Additionally, elastic carbon nanotubes are a promising experimental artificial muscle technology. The absence of defects in carbon nanotubes enables these filaments to deform elastically by several percent, with energy storage levels of perhaps 10 J/cm3 for metal nanotubes. Human biceps could be replaced with wire of this material measuring 8 millimetres (3⁄8 in) in diameter, feasibly allowing future robots to outperform humans. ==== Locomotion ==== Robots with only one or two wheel(s) can have advantages such as greater efficiency, reduced parts, and navigation through confined areas. A one-wheeled robot balances on a round ball; Carnegie Mellon University's Ballbot is the approximate height and width of a person. Several attempts have also been made to build spherical robots (also known as orb bots or ball bots), which move by spinning a weight inside the ball or rotating outer shells. Two-wheeled balancing robots generally use a gyroscope to detect how much a robot is falling and drive the wheels proportionally up to hundreds of times per second to counterbalance the fall, based on inverted pendulum dynamics. NASA's Robonaut has been mounted to a Segway for a similar effect. Most mobile robots have four wheels or continuous tracks. Six wheels can give better traction in outdoor terrain, while tracks provide even more grip. Tracked wheels are common for outdoor off-road robots, but are difficult to use indoors. A small number of skating robots have been developed, one of which is a multimodal walking and skating device with four legs and unpowered wheels. Several robots have been made that can walk on two legs, but not yet as reliably as a human. Many other robots have been built that walk on more than two legs, being significantly easier. Walking robots could be used for uneven terrains, providing a high degree of mobility and efficiency, but two-legged robots can currently only handle flat floors or perhaps stairs. Some approaches have included: The zero moment point (ZMP) is the algorithm used by robots such as Honda's ASIMO. The robot's onboard computer tries to keep the total inertial forces (the combination of Earth's gravity and the acceleration and deceleration of walking) exactly opposed by the floor reaction force (the force of the floor pushing back on the robot's foot). In this way, the two forces cancel out, leaving no moment (force causing the robot to rotate and fall over). Human observers note that this is not exactly how a human walks, with some describing ASIMO's walk as looking like it needs use the bathroom. ASIMO's walking algorithm utilizes some dynamic balancing, but requires a flat surface. Several robots, built in the 1980s by Marc Raibert at the MIT Leg Laboratory, successfully demonstrated very dynamic walking. Initially, a robot with only one leg, and a very small foot could stay upright simply by hopping. The movement is the same as that of a person on a pogo stick. As the robot falls to one side, it would jump slightly in that direction to catch itself. Soon, the algorithm was generalized to two and four legs. A bipedal robot was demonstrated running and even performing somersaults. A quadruped was also demonstrated which could trot, run, pace, and bound. A more advanced approach is a dynamic balancing algorithm, which constantly monitors the robot's motion and places the feet to maintain stability. This technique has been demonstrated by Anybots' Dexter robot (
Read more →
Imaging phantom

An imaging phantom, or simply phantom (less commonly spelled fantom), is a specially designed object that is scanned or imaged in the field of medical imaging to evaluate, analyze, and tune the performance of various imaging devices. A phantom is more readily available and provides more consistent results than the use of a living subject or cadaver, while also avoiding direct risks to living subjects. Phantoms were originally employed in 2D x-ray–based imaging techniques such as radiography or fluoroscopy, but more recently phantoms with desired imaging characteristics have been developed for 3D techniques such as SPECT, MRI, CT, ultrasound, PET, and other imaging modalities. == Design == A phantom used to evaluate an imaging device should respond in a similar manner to how human tissues and organs would act in that specific imaging modality. For instance, phantoms made for 2D radiography may hold various quantities of x-ray contrast agents with similar x-ray absorbing properties (such as the attenuation coefficient) to normal tissue to tune the contrast of the imaging device or modulate the patient's exposure to radiation. In such a case, the radiography phantom would not necessarily need to have similar textures and mechanical properties since these are not relevant in x-ray imaging modalities. However, in the case of ultrasonography, a phantom with similar rheological and ultrasound scattering properties to real tissue would be essential, but x-ray absorbing properties would not be relevant. The term "phantom" describes an object that is designed to resemble human tissue and can be evaluated, analyzed or manipulated to study the performance of a medical device. Phantoms are created using a digital file that is rendered through magnetic resonance imaging (MRI) or computer-aided design (CAD). The digital files allow for quick modifications that are read by the 3D printer. The 3D printer will create the product in successive layers using polymeric materials. There are several types of phantoms including tissue-mimicking, radiological phantoms, dental phantoms, BOMABs (used to calibrate whole-body counters), and more.
Read more →
Superquadrics

In mathematics, the superquadrics or super-quadrics (also superquadratics) are a family of geometric shapes defined by formulas that resemble those of ellipsoids and other quadrics, except that the squaring operations are replaced by arbitrary powers. They can be seen as the three-dimensional relatives of the superellipses. The term may refer to the solid object or to its surface, depending on the context. The equations below specify the surface; the solid is specified by replacing the equality signs by less-than-or-equal signs. The superquadrics include many shapes that resemble cubes, octahedra, cylinders, lozenges and spindles, with rounded or sharp corners. Because of their flexibility and relative simplicity, they are popular geometric modeling tools, especially in computer graphics. It becomes an important geometric primitive widely used in computer vision, robotics, and physical simulation. Some authors, such as Alan Barr, define "superquadrics" as including both the superellipsoids and the supertoroids. In modern computer vision literatures, superquadrics and superellipsoids are used interchangeably, since superellipsoids are the most representative and widely utilized shape among all the superquadrics. Comprehensive coverage of geometrical properties of superquadrics and methods of their recovery from range images and point clouds are covered in several computer vision literatures. == Formulas == === Implicit equation === The surface of the basic superquadric is given by | x | r + | y | s + | z | t = 1 {\displaystyle \left|x\right|^{r}+\left|y\right|^{s}+\left|z\right|^{t}=1} where r, s, and t are positive real numbers that determine the main features of the superquadric. Namely: less than 1: a pointy octahedron modified to have concave faces and sharp edges. exactly 1: a regular octahedron. between 1 and 2: an octahedron modified to have convex faces, blunt edges and blunt corners. exactly 2: a sphere greater than 2: a cube modified to have rounded edges and corners. infinite (in the limit): a cube Each exponent can be varied independently to obtain combined shapes. For example, if r=s=2, and t=4, one obtains a solid of revolution which resembles an ellipsoid with round cross-section but flattened ends. This formula is a special case of the superellipsoid's formula if (and only if) r = s. If any exponent is allowed to be negative, the shape extends to infinity. Such shapes are sometimes called super-hyperboloids. The basic shape above spans from -1 to +1 along each coordinate axis. The general superquadric is the result of scaling this basic shape by different amounts A, B, C along each axis. Its general equation is | x A | r + | y B | s + | z C | t = 1. {\displaystyle \left|{\frac {x}{A}}\right|^{r}+\left|{\frac {y}{B}}\right|^{s}+\left|{\frac {z}{C}}\right|^{t}=1.} === Parametric description === Parametric equations in terms of surface parameters u and v (equivalent to longitude and latitude if m equals 2) are x ( u , v ) = A g ( v , 2 r ) g ( u , 2 r ) y ( u , v ) = B g ( v , 2 s ) f ( u , 2 s ) z ( u , v ) = C f ( v , 2 t ) − π 2 ≤ v ≤ π 2 , − π ≤ u < π , {\displaystyle {\begin{aligned}x(u,v)&{}=Ag\left(v,{\frac {2}{r}}\right)g\left(u,{\frac {2}{r}}\right)\\y(u,v)&{}=Bg\left(v,{\frac {2}{s}}\right)f\left(u,{\frac {2}{s}}\right)\\z(u,v)&{}=Cf\left(v,{\frac {2}{t}}\right)\\&-{\frac {\pi }{2}}\leq v\leq {\frac {\pi }{2}},\quad -\pi \leq u<\pi ,\end{aligned}}} where the auxiliary functions are f ( ω , m ) = sgn ⁡ ( sin ⁡ ω ) | sin ⁡ ω | m g ( ω , m ) = sgn ⁡ ( cos ⁡ ω ) | cos ⁡ ω | m {\displaystyle {\begin{aligned}f(\omega ,m)&{}=\operatorname {sgn}(\sin \omega )\left|\sin \omega \right|^{m}\\g(\omega ,m)&{}=\operatorname {sgn}(\cos \omega )\left|\cos \omega \right|^{m}\end{aligned}}} and the sign function sgn(x) is sgn ⁡ ( x ) = { − 1 , x < 0 0 , x = 0 + 1 , x > 0. {\displaystyle \operatorname {sgn}(x)={\begin{cases}-1,&x<0\\0,&x=0\\+1,&x>0.\end{cases}}} === Spherical product === Barr introduces the spherical product which given two plane curves produces a 3D surface. If f ( μ ) = ( f 1 ( μ ) f 2 ( μ ) ) , g ( ν ) = ( g 1 ( ν ) g 2 ( ν ) ) {\displaystyle f(\mu )={\begin{pmatrix}f_{1}(\mu )\\f_{2}(\mu )\end{pmatrix}},\quad g(\nu )={\begin{pmatrix}g_{1}(\nu )\\g_{2}(\nu )\end{pmatrix}}} are two plane curves then the spherical product is h ( μ , ν ) = f ( μ ) ⊗ g ( ν ) = ( f 1 ( μ ) g 1 ( ν ) f 1 ( μ ) g 2 ( ν ) f 2 ( μ ) ) {\displaystyle h(\mu ,\nu )=f(\mu )\otimes g(\nu )={\begin{pmatrix}f_{1}(\mu )\ g_{1}(\nu )\\f_{1}(\mu )\ g_{2}(\nu )\\f_{2}(\mu )\end{pmatrix}}} This is similar to the typical parametric equation of a sphere: x = x 0 + r sin ⁡ θ cos ⁡ φ y = y 0 + r sin ⁡ θ sin ⁡ φ ( 0 ≤ θ ≤ π , 0 ≤ φ < 2 π ) z = z 0 + r cos ⁡ θ {\displaystyle {\begin{aligned}x&=x_{0}+r\sin \theta \;\cos \varphi \\y&=y_{0}+r\sin \theta \;\sin \varphi \qquad (0\leq \theta \leq \pi ,\;0\leq \varphi <2\pi )\\z&=z_{0}+r\cos \theta \end{aligned}}} which give rise to the name spherical product. Barr uses the spherical product to define quadric surfaces, like ellipsoids, and hyperboloids as well as the torus, superellipsoid, superquadric hyperboloids of one and two sheets, and supertoroids. == Plotting code == The following GNU Octave code generates a mesh approximation of a superquadric:
Read more →
Automated parking system

An automated (car) parking system (APS) is a mechanical system designed to minimize the area and/or volume required for parking cars. Like a multi-story parking garage, an APS provides parking for cars on multiple levels stacked vertically to maximize the number of parking spaces while minimizing land usage. The APS, however, utilizes a mechanical system to transport cars to and from parking spaces (rather than the driver) in order to eliminate much of the space wasted in a multi-story parking garage. While a multi-story parking garage is similar to multiple parking lots stacked vertically, an APS is more similar to an automated storage and retrieval system for cars. Parking systems are generally powered by electric motors or hydraulic pumps that move vehicles into a storage position.The paternoster (shown animated at the right) is an example of one of the earliest and most common types of APS. APS are also generically known by a variety of other names, including:automated parking facility (APF), automated vehicle storage and retrieval system (AVSRS), car parking system, mechanical parking, and robotic parking garage. == History == The concept for the automated parking system was and is driven by two factors: a need for parking spaces and a scarcity of available land. The earliest use of an APS was in Paris, France in 1905 at the Garage Rue de Ponthieu. The APS consisted of a groundbreaking multi-story concrete structure with an internal car elevator to transport cars to upper levels where attendants parked the cars. In the 1920s, a Ferris wheel-like APS (for cars rather than people) called a paternoster system became popular as it could park eight cars in the ground space normally used for parking two cars. Mechanically simple with a small footprint, the paternoster was easy to use in many places, including inside buildings. At the same time, Kent Automatic Garages was installing APS with capacities exceeding 1,000 cars. The “ferris-wheel,” or paternoster system — was created by the Westinghouse Corporation in 1923 and subsequently built in 1932 on Chicago's Monroe Street. The Nash Motor Company created the first glass-enclosed version of this system for the Chicago Century of Progress Exhibition in 1933 The first driverless parking garage opened in 1951 in Washington, D.C., but was replaced with office space due to increasing land values. APS saw a spurt of interest in the U.S. in the late 1940s and 1950s with the Bowser, Pigeon Hole and Roto Park systems. In 1957, 74 Bowser, Pigeon Hole systems were installed, and some of these systems remain in operation. However, interest in APS in the U.S. waned due to frequent mechanical problems and long waiting times for patrons to retrieve their cars. In the United Kingdom, the Auto Stacker opened in 1961 in Woolwich, south east London, but proved equally difficult to operate. Interest in APS in the U.S. was renewed in the 1990s, and there were 25 major current and planned APS projects (representing nearly 6,000 parking spaces) in 2012. The first American robotic parking garage opened in 2002 in Hoboken, New Jersey. While interest in the APS in the U.S. languished until the 1990s, Europe, Asia and Central America had been installing more technically advanced APS since the 1970s. In the early 1990s, nearly 40,000 parking spaces were being built annually using the paternoster APS in Japan. In 2012, there are an estimated 1.6 million APS parking spaces in Japan. The ever-increasing scarcity of available urban land (urbanization) and increase of the number of cars in use (motorization) have combined with sustainability and other quality-of-life issues to renew interest in APS as alternatives to multi-storey car parks, on-street parking, and parking lots. == Largest systems == The largest Automated Parking Facility in the world is in Al Jahra, Kuwait, and provides 2,314 parking spaces. The world's fastest Automated Parking System is in Wolfsburg, Germany, with a retrieval time of 1 minute and 44 seconds. The largest APS in Europe is at Dokk1 in Aarhus, Denmark, and provides 1,000 parking spaces via 20 car lifts. == Space saving == All APS take advantage of a common concept to decrease the area of parking spaces - removing the driver and passengers from the car before it is parked. With either fully automated or semi-automated APS, the car is driven up to an entry point to the APS and the driver and passengers exit the car. The car is then moved automatically or semi-automatically (with some attendant action required) to its parking space. The space-saving provided by the APS, compared to the multi-story parking garage, is derived primarily from a significant reduction in space not directly related to the parking of the car: Parking space width and depth (and distances between parking spaces) are dramatically reduced since no allowance need be made for driving the car into the parking space or for the opening of car doors (for drivers and passengers) No driving lanes or ramps are needed to drive the car to/from the entrance/exit to a parking space Ceiling height is minimized since there is no pedestrian traffic (drivers and passengers) in the parking area, and No walkways, stairways or elevators are needed to accommodate pedestrians in the parking area. With the elimination of ramps, driving lanes, pedestrians and the reduction in ceiling heights, the APS requires substantially less structural material than the multi-story parking garage. Many APS utilize a steel framework (some use thin concrete slabs) rather than the monolithic concrete design of the multi-story parking garage. These factors contribute to an overall volume reduction and further space savings for the APS. == Other considerations == In addition to the space saving, many APS designs provide a number of secondary benefits: The parked cars and their contents are more secure since there is no public access to parked cars Minor parking lot damage such as scrapes and dents are eliminated Drivers and passengers are safer not having to walk through parking lots or garages Driving around in search of a parking space is eliminated, thereby reducing engine emissions and wasted time Only minimal ventilation and lighting systems are needed Handicap access is improved The volume and visual impact of the parking structure is minimized Shorter construction time === Problems === There have been a number of problems with robotic parking systems, particularly in the United States. The systems work well in balanced throughput situations like shopping malls and train stations, but they are unsuited to high peak volume applications like rush hour usage or stadiums and they suffer from technical problems. Further, parkers not familiar with the system may cause problems, for example by failing to push the button to alert a fully automated system to the presence of a car to be parked. In London around 40 vehicles were trapped for two years in CBRE's system. == Fully automated vs semi-automated == Fully automated parking systems operate much like robotic valet parking. The driver drives the car into an APS entry (transfer) area. The driver and all passengers exit the car. The driver uses an automated terminal nearby for payment and receipt of a ticket. When driver and passengers have left the entry area, the mechanical system lifts the car and transports it to a pre-determined parking space in the system. More sophisticated fully automated APS will obtain the dimensions of cars on entry in order to place them in the smallest available parking space. The driver retrieves a car by inserting a ticket or code into an automated terminal. The APS lifts the car from its parking space and delivers it to an exit area. Most often, the retrieved car has been oriented to eliminate the need for the driver to back out. Fully automated APS theoretically eliminate the need for parking attendants. Semi-automated APS also use a mechanical system of some type to move a car to its parking space, however putting the car into and/or the operation of the system requires some action by an attendant or the driver. The choice between fully and semi-automated APS is often a matter of space and cost, however large capacity (> 100 cars) tend to be fully automated. == Applications == By virtue of their relatively smaller volume and mechanized parking systems, APS are often used in locations where a multi-story parking garage would be too large, too costly or impractical. Examples of such applications include, under or inside existing or new structures, between existing structures and in irregularly shaped areas. APS can also be applied in situations similar to multi-storey parking garages such as freestanding above ground, under buildings above grade and under buildings below grade. == Costs == The direct comparison of costs between an APS and a multi-story parking garage can be complicated by many variables such as capacity, land costs, area shape, number and location of entranc
Read more →
Clue (mobile app)

Clue is a menstrual health app developed by the Berlin-based technology company BioWink GmbH. The app has over 15 million users from 180 countries. The startup has raised over $17 million from backers that include Union Square Ventures and Mosaic Ventures. == History == Clue was co-founded by Ida Tin, Hans Raffauf, Mike LaVigne and Moritz von Buttlar in 2012. BioWink GmbH launched the app in 2013. Ida Tin's stated goal was to take female reproductive health “out of taboo land” and to start “a reproductive health revolution.” Tin previously led motorbike tours around the world and wrote a book about her experience. By July 2017, the Clue app had more than 8 million active users on both Android and iOS. Users were representative of more than 180 countries. In 2015, BioWink GmbH closed a $7 million Series A funding round led by Union Square Ventures and Mosaic Ventures, bringing the company's total funding to $10 million. The company was listed as one of Europe's Hottest Startups in 2015 by Wired UK, with Clue being named one of the best apps in 2015 by both Apple and Google. In March 2018, the company launched an editorial site to serve as a resource for accessible and scientific menstrual health information. == Mobile app == The Clue mobile application calculates and predicts a user's period, fertile window, and premenstrual syndrome. It also informs users the most or least likely time for becoming pregnant and allows them to track more than 30 health categories, including sex, sleep, pain, exercise, hair, skin, digestion, emotions and energy. The app can also explain how pill dosages impact fertility and includes an alarm system to allow for reminders for taking pills. In 2015, the company closed a Series A funding round and announced plans to use the proceeds to expand features of the mobile app and hire more staff. Clue also partnered with universities such as Stanford University, Columbia University, University of Washington, and University of Oxford to advance female health research. Clue integrated with Apple Inc.'s HealthKit for iOS 9 in September 2015, allowing data such as body temperature, cervical mucus quality, menstruation, ovulation test results, sexual activity, and spotting directly to the app. In 2016, Clue was available in 15 languages on both iOS and Android. That same year, Clue introduced a cycle-sharing feature and in 2017 a pill-tracking option. In February 2018, Clue made its app available on the Fitbit Ionic smartwatch. In 2026, Clue partnered with UK-based digital healthcare platform Evaro, an NHS-licensed provider, to offer embedded prescription services within the app.
Read more →
Luma (video)

In video, luma ( Y ′ {\displaystyle Y'} ) represents the brightness in an image (the "black-and-white" or achromatic portion of the image). Luma is typically paired with chroma. Luma represents the achromatic image, while the chroma components represent the color information. Converting R′G′B′ sources (such as the output of a three-CCD camera) into luma and chroma allows for chroma subsampling: because human vision has finer spatial sensitivity to luminance ("black and white") differences than chromatic differences, video systems can store and transmit chromatic information at lower resolution, optimizing perceived detail at a particular bandwidth. == Luma versus relative luminance == Luma is the weighted sum of gamma-compressed R′G′B′ components of a color video—the prime symbols ′ denote gamma compression. The word was proposed to prevent confusion between luma as implemented in video engineering and relative luminance as used in color science (i.e. as defined by CIE). Relative luminance is formed as a weighted sum of linear RGB components, not gamma-compressed ones. Even so, luma is sometimes erroneously called luminance. SMPTE EG 28 recommends the symbol Y ′ {\displaystyle Y'} to denote luma and the symbol Y {\displaystyle Y} to denote relative luminance. === Use of relative luminance === While luma is more often encountered, relative luminance is sometimes used in video engineering when referring to the brightness of a monitor. The formula used to calculate relative luminance uses coefficients based on the CIE color matching functions and the relevant standard chromaticities of red, green, and blue (e.g., the original NTSC primaries, SMPTE C, or Rec. 709). For the Rec. 709 (and sRGB) primaries, the linear combination, based on pure colorimetric considerations and the definition of relative luminance is: Y = 0.2126 R + 0.7152 G + 0.0722 B {\displaystyle Y=0.2126R+0.7152G+0.0722B} The formula used to calculate luma in the Rec. 709 spec arbitrarily also uses these same coefficients, but with gamma-compressed components: Y ′ = 0.2126 R ′ + 0.7152 G ′ + 0.0722 B ′ , {\displaystyle Y'=0.2126R'+0.7152G'+0.0722B',} where the prime symbol ′ denotes gamma compression. == Rec. 601 luma versus Rec. 709 luma coefficients == For digital formats following CCIR 601 (i.e. most digital standard definition formats), luma is calculated with this formula: Y 601 ′ = 0.299 R ′ + 0.587 G ′ + 0.114 B ′ {\displaystyle Y'_{\text{601}}=0.299R'+0.587G'+0.114B'} Formats following ITU-R Recommendation BT. 709 (i.e. most digital high definition formats) use a different formula: Y 709 ′ = 0.2126 R ′ + 0.7152 G ′ + 0.0722 B ′ {\displaystyle Y'_{\text{709}}=0.2126R'+0.7152G'+0.0722B'} Modern HDTV systems use the 709 coefficients, while transitional 1035i HDTV (MUSE) formats may use the SMPTE 240M coefficients: Y 240 ′ = 0.212 R ′ + 0.701 G ′ + 0.087 B ′ = Y 145 ′ {\displaystyle Y'_{\text{240}}=0.212R'+0.701G'+0.087B'=Y'_{\text{145}}} These coefficients correspond to the SMPTE RP 145 primaries (also known as "SMPTE C") in use at the time the standard was created. The change in the luma coefficients is to provide the "theoretically correct" coefficients that reflect the corresponding standard chromaticities ('colors') of the primaries red, green, and blue. However, there is some controversy regarding this decision. The difference in luma coefficients requires that component signals must be converted between Rec. 601 and Rec. 709 to provide accurate colors. In consumer equipment, the matrix required to perform this conversion may be omitted (to reduce cost), resulting in inaccurate color. == Luma and luminance errors == As well, the Rec. 709 luma coefficients may not necessarily provide better performance. Because of the difference between luma and relative luminance, luma does not exactly represent the luminance in an image. As a result, errors in chroma can affect luminance. Luma alone does not perfectly represent luminance; accurate luminance requires both accurate luma and chroma. Hence, errors in chroma "bleed" into the luminance of an image. Note the bleeding in lightness near the borders. Due to the widespread usage of chroma subsampling, errors in chroma typically occur when it is lowered in resolution/bandwidth. This lowered bandwidth, coupled with high frequency chroma components, can cause visible errors in luminance. An example of a high frequency chroma component would be the line between the green and magenta bars of the SMPTE color bars test pattern. Error in luminance can be seen as a dark band that occurs in this area.
Read more →
Engineering Historical Memory

Engineering Historical Memory (EHM) is an online database in the digital humanities, serving as an open-access research tool for primary historical materials focused on 11th to 15th century Afro-Eurasia. It adopts computational methods to make historical documents machine-understandable. EHM parses traditional artifacts such as historical maps, travel accounts, chronicles and codices into computer-readable formats, and links them to secondary multi-media references, a process referred to as the "automatic narrative generation". This approach generates cultural narratives and facilitates interaction with the historical artifacts, making them accessible to audiences from various backgrounds. == History == EHM was first theorised in 2007 by researcher Andrea Nanetti when he was a visiting scholar at Princeton University, and the preliminary test results were published between 2008 and 2011. In 2013, the EHM research team was set up in Singapore following Nanetti's professorship at Nanyang Technological University (NTU). Two years later, after receiving several Microsoft research grants, EHM went live on Microsoft Azure. In 2018, the College of Humanities, Arts and Social Sciences (CoHASS) at NTU Singapore formed the Digital Humanities Research Cluster, as part of which, EHM has been an ongoing interdisciplinary research project led by Nanetti. Partnering with international educational and cultural institutions such as Ca' Foscari University of Venice, University of Florence, Taylor & Francis Group, Delft University of Technology (TUDelft), and SenticNet, EHM has been supported by over 130 scholars and engineers. == Applications == Primary historical materials on EHM are curated into several categories, including maps, travel accounts, chronicles, codices, sites, archival documents, and paintings, such as the Morosini Codex (listed under Chronicles) and Pope Gregory X's Privilege for the Holy Monastery of St Catherine of Sinai (listed under Archival Documents). EHM has been adopted by cultural organisations as an exhibition and research tool in the digital humanities field. An example is the publication of a digital interactive edition of Fra Mauro's Map of the World on EHM, a collaboration project between NTU Singapore and the Biblioteca Nazionale Marciana of Venice. The digitisation process of the map on EHM involved transcribing and geo-referencing the textual content in the 15th-century map, followed by creating semantic annotations to connect the map's content with related secondary data sources. The e-map was subsequently adopted and launched online by Museo Galileo in March 2022 and incorporated into the virtual exhibition "Venezia and Suzhou: Water Cities along the Silk Roads" (online, September-December 2022). In 2024, the Fra Mauro's Map of the World application on EHM was awarded the Digital Humanities and Multimedia Studies Prize (DHMS) by the Medieval Academy of America. Image-Based Video Search Engine is another experimental project under the EHM scope led by the research teams at Delft University of Technology (TUDelft) and NTU Singapore. This ongoing project aims to improve the efficiency of retrieving targeted objects from audio-visuals. == Awards == In 2021, EHM won the GLAMi Awards (MuseWeb Conference - Galleries, Libraries, Archives, and Museums Innovation awards) in the "Resources for Scholars and Researchers" category. In the same year, EHM was a Falling Walls finalist for Science Breakthrough of the Year in the category Social Sciences and Humanities after nominated by the School of Advanced Study at the University of London. In April 2022, the Italian National Commission for UNESCO has selected and sent the EHM project to the organisers of the "Jikji Memory of the World" Award for final evaluation. In January 2024, the Medieval Academy of America announced its 2024 Digital Humanities and Multimedia Studies Prize (DHMS) goes to the Fra Mauro's Map of the World application on EHM.
Read more →
Procreate (software)

Procreate is a raster graphics editor app for digital painting developed and published by the Australian company Savage Interactive for iOS and iPadOS. It was launched on the App Store in 2011. == Versions == === Procreate === Procreate for iPad was first released in 2011 by the Tasmanian software company Savage Interactive. In June 2013, Savage launched Procreate 2 in conjunction with iOS 7, adding new features such as higher resolution capabilities and more brush options. In 2016, Procreate became one of the top ten best-selling iPad apps on the App Store. In 2018, Procreate became the overall best selling iPad app. With iOS 26, Procreate adapted Liquid Glass into its software. As of March 2026, the most recent version of Procreate for the iPad is 5.4.9. === Procreate Pocket === Procreate Pocket was released to the App Store in December 2014. In 2018, Savage launched Procreate Pocket 2.0 to the App Store. In December 2018, Procreate Pocket received Apple's "App of the Year" award. As of September 2025, the most recent version of Procreate Pocket (for the iPhone) is 4.0.15. === Procreate Dreams === Procreate Dreams, their more recent app focused on 2D animation, was released on the App Store on November 22, 2023. While the application is commended for its intuitive interface and accessibility, some reviewers have noted that it may lack some key animations features, such as reference layers. In June 2024, Procreate Dreams received the 2024 Apple Design Award for Innovation. In December 2025, Savage Interactive released Procreate Dreams 2, a long awaited update and redesign to Procreate Dreams. == Features == The current versions of Procreate use Valkyrie, a proprietary graphics engine to allow customisable brush options and importing brushes from Adobe Photoshop. Procreate offers known features like layers, masks, and blending mode. Its biggest standout compared to other professional drawing software is its simple UI and comparatively easy learning curve. The app also allows for animation. Savage expanded upon Procreate's animation features with a companion app dedicated to 2D animation called Procreate Dreams, released in November 2023. On August 2024, Procreate announced that it would not be incorporating generative artificial intelligence into its software. Savage offers a free internet forum called Procreate Discussions in which users can ask for help, suggest ideas, and share user-generated content on the marketplace or the resources board. == Notable users == Concept artist Doug Chiang creates robot, vehicle, and creature designs for Star Wars in Procreate. Professional artists have also used Procreate to create the posters for Stranger Things, Logan, and Blade Runner 2049, as well as several covers for The New Yorker. It has also been professionally adopted at Marvel Comics, DC Comics, Disney Animation, and Pixar.
Read more →
Signal-to-noise ratio (imaging)

Signal-to-noise ratio (SNR) is used in imaging to characterize image quality. The sensitivity of a (digital or film) imaging system is typically described in the terms of the signal level that yields a threshold level of SNR. Industry standards define sensitivity in terms of the ISO film speed equivalent, using SNR thresholds (at average scene luminance) of 40:1 for "excellent" image quality and 10:1 for "acceptable" image quality. SNR is sometimes quantified in decibels (dB) of signal power relative to noise power, though in the imaging field the concept of "power" is sometimes taken to be the power of a voltage signal proportional to optical power; so a 20 dB SNR may mean either 10:1 or 100:1 optical power, depending on which definition is in use. == Definition of SNR == Traditionally, SNR is defined to be the ratio of the average signal value μ s i g {\displaystyle \mu _{\mathrm {sig} }} to the standard deviation of the signal σ s i g {\displaystyle \sigma _{\mathrm {sig} }} : S N R = μ s i g σ s i g {\displaystyle \mathrm {SNR} ={\frac {\mu _{\mathrm {sig} }}{\sigma _{\mathrm {sig} }}}} when the signal is an optical intensity, or as the square of this value if the signal and noise are viewed as amplitudes (field quantities).
Read more →
Oculus Quill

Quill is a painting and animation software for virtual reality. It runs on Microsoft Windows with Oculus Rift headsets. It is used to create 3D paintings and animated cartoons. Quill was released on November 29, 2016, on the Oculus Store. Theater Elsewhere(formerly Quill Theater), an application for viewing creations made in Quill, was later made available following the release of the Oculus Quest. In September 2021, Facebook, now known as Meta Platforms, and the owner of Oculus, sold Quill to its original creator, who continues to develop and support the app. == Development == Quill was originally developed by Oculus Story Studio as an internal tool for the creative needs of the studio's project Dear Angelica directed by Saschka Unseld along with its art-director Wesley Allsbrook. == Controls == The software works on Oculus Rift utilizing its 6DoF motion controllers. Users can paint in 3D space using their hands naturally, and animate those paintings with keyframes. They can also capture videos and photos of their creations. == Reception == Dear Angelica, a VR story fully painted in Quill, was nominated for an Emmy Award in 2017.
Read more →
N-World

N-World is a 3D graphics package developed by Nichimen Graphics in the 1990s, for Silicon Graphics and Windows NT workstations. Intended primarily for video game content creation, it has polygon modeling tools, 2D and 3D paint, scripting, color reduction, and exporters for several popular game consoles. After its initial release on Windows NT, N-World was renamed Mirai. The winged edge 3D modeler in N-World inspired the development at Nichimen Graphics of Nendo, a standalone 3D modeler, which in turn inspired the open source modeler Wings 3D. == History == N-World originated with Symbolics, a computer manufacturer notable for producing Lisp-based systems in the 1980s. Among the software packages that were produced for Symbolics computers are S-Graphics, a 3D animation suite that includes modules for polygon modeling, dynamics, paint, and rendering — titled S-Geometry, S-Dynamics, S-Paint, and S-Render, respectively. In 1992, Japanese trading company Nichimen Corporation purchased the rights to S-Graphics, ported it to Silicon Graphics IRIX, and marketed it as N-World. N-World retains the Lisp-based underpinnings of its predecessor, but was targeted at interactive content producers, with features useful for game developers. It was priced at US$16,995 (equivalent to $34,100 in 2025) for the full suite, later reduced to $9,995 when ported to Windows NT in 1997. N-World was used to create graphics for many console games in the 1990s, specifically most of the Nintendo 64 games, like Super Mario 64 and Final Fantasy VII. It was superseded by Mirai in 1999. == Features == The N-World package, like its predecessor S-Graphics, is divided into several components: N-Geometry: 3D polygon-based modeling tools, including smoothing, "magnet" geometry editing, and instancing. N-Dynamics: Animation tools including scripting, curve-based animation, and skeletal animation. N-Render: Surfacing and rendering tools with ray tracing and materials output to various game console formats. N-Paint: 2D and 3D paint with mattes, effects, color reduction, and a visual VRAM editor for PlayStation. Game Tools: Utilities for game developers, including exporters for PlayStation, Nintendo 64, and Saturn consoles. == Credits == The following games were created using N-World. Rap Stars Online
Read more →
FIRST Global Challenge

The FIRST Global Challenge is a yearly robotics competition organized by the International First Committee Association. It promotes STEM education and careers for youth and was created by Dean Kamen in 2016 as an expansion of FIRST, an organization with similar objectives. == History == FIRST Global is a trade name for the International First Committee Association, a nonprofit corporation based in Manchester, New Hampshire, with a 501(c)(3) designation from the IRS. The nonprofit was founded by the co-founder of FIRST, Dean Kamen, with the objective of promoting STEM education and careers in the developing world through Olympics-style robotics competitions. Former US Congressman, Joe Sestak was the organization's president in 2017, but left after the 2017 Challenge. Each year, the FIRST Global Challenge is held in a different city. For example, Mexico City was selected to host the 2018 Challenge after the United States hosted the 2017 edition in Washington, DC. This is a change from FIRST's system of championships, where one city hosts for several years at a time. In May 2020, it was announced that FIRST Global would not host a traditional challenge in 2020 due to the COVID-19 pandemic and shifted to a remote model. One of the three champions were Team Bangladesh. In 2022, FIRST Global returned to in-person events with the 2022 Challenge in Geneva, Switzerland. == Editions == === Washington, D.C. 2017 === The 2017 FIRST Global Challenge was held in Washington, D.C., from July 16–18, and the challenge was the use of robots to separate different colored balls, representing clean water and impurities in water, symbolizing the Engineering Grand Challenge (based on the Millennium Development Goal) of improving access to clean water in the developing world. Around 160 teams composed of 15- to 18-year-olds from 157 countries participated, and around 60% of teams were created or led by young women. Six continental teams also participated. === Mexico City 2018 === The 2018 FIRST Global Challenge was held in Mexico City from August 15–18. The 2018 Challenge was called Energy Impact and explored the impact of various types of energy on the world and how they can be made more sustainable. In the challenge, robots worked together in teams of three to give cubes to human players, turn a crank, and score cubes in goals in order to generate electrical power. The challenge was based on three Engineering Grand Challenges; making solar energy affordable, making fusion energy a reality, and creating carbon sequestration methods. === Dubai 2019 === The 2019 challenge, called Ocean Opportunities, was held in Dubai from October 24–27 and was the first challenge hosted outside of North America. The challenge was themed around clearing the ocean of pollutants, and had two alliances of three teams each attempting to score large and small balls representing pollutants into processing areas and a processing barge. The processing barge had multiple levels, with higher levels worth more points. At the end of the match, robots "docked" with the barge by driving onto or climbing up it, with climbing worth more points. The event was opened by Sheikh Hamdan bin Mohammed Al Maktoum, Crown Prince of Dubai. === Geneva 2022 === The 2022 challenge called Carbon Capture, was held in Geneva from October 13–16. The challenge was themed around removing carbon dioxide (CO2) emissions from the atmosphere. In the Carbon Capture game, six different countries worked together to capture and store black balls representing carbon particles. The storage tower had multiple cantilevered bars that the robots mounted to, with the higher bars worth a greater multiplier. At the end of a match, robots "docked" on the storage tower's base or climbed the bars with their alliance indicator ball. Each match started with a "global alliance" of six countries, then divided into two "regional alliances" each consisting of three countries. The event was opened by Dr. Martina Hirayama, Switzerland State Secretary for Education, Research and Innovation (SERI). === Singapore 2023 === The 2023 challenge, called Hydrogen Horizons, was held in Singapore from October 7–10. The challenge is themed around renewable energy with a focus on hydrogen technologies. === Athens 2024 === The 2024 challenge was hosted in the Peace and Friendship Stadium in Attica, Greece. === Panama 2025 === The 2025 challenge, Eco Equilibrium, was hosted in the Panama Convention Centre in Panama City, Panama. == Subordinate programs == === Global STEM Corps === The Global STEM Corps is a FIRST Global initiative that connects qualified volunteer mentors with students in developing countries to prepare them for competitions. === New Technology Experience === The New Technology Experience (NTE) is an annual component of the FIRST Global Challenge that was added to the organization's offerings in 2021. It was established as a means for the student community to stay current with cutting-edge technology and is integrated with each year's theme. The 2021 NTE was the CubeSat Prototype Challenge. The 2022 NTE, Carbon Countermeasures, was presented in partnership with XPRIZE.
Read more →
Optical granulometry

Optical granulometry is the process of measuring the different grain sizes in a granular material, based on a photograph. Technology has been created to analyze a photograph and create statistics based on what the picture portrays. This information is vital in maintaining machinery in various trades worldwide. Mining companies can use optical granulometry to analyze inactive or moving rock to quantify the size of these fragments. Forestry companies can zero in on wood chip sizes without stopping the production process, and minimize sizing errors. With more photoanalysis technologies being produced, mining companies have shown an increased interest in these types of systems because of their ability to maintain efficiency throughout the mining process. Companies are saving millions of dollars annually because of this new technology, and are cutting back on maintenance costs on equipment. In order for optical granulometry to be completely successful, an accurate photo must be taken – under sufficient lighting, and using proper technology – to obtain quantified results. If these requirements are met, an image analysis system can be implemented. == The process == Software uses four basic steps in determining the average size of material: See the Wikipedia article on Photoanalysis to see how mining, forestry and agricultural companies are using this technology to improve quality control techniques. == Smartphone-based, segmentation-free estimation of grain size distribution == Recently, a methodology has emerged by which soil grain size distribution can be inferred from optical images acquired with commodity smartphones by training convolutional neural networks to predict parameters of the distribution curve directly from the image, without explicit image segmentation . In this approach, a standardized image of a soil surface is captured under controlled conditions, preprocessed to reduce device-specific variability, and passed to a regression model that outputs the parameters of a cumulative distribution function e.g., a two-parameter Weibull curve. The resulting distribution can be used to derive geotechnical descriptors and class boundaries.
Read more →