AI Coding Discord

AI Coding Discord — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Color vision

Color vision (CV), a feature of visual perception, is an ability to perceive differences between light composed of different frequencies independently of light intensity. Color perception is a part of the larger visual system and is mediated by a complex process between neurons that begins with differential stimulation of different types of photoreceptors by light entering the eye. Those photoreceptors then emit outputs that are propagated through many layers of neurons ultimately leading to higher cognitive functions in the brain. Color vision is found in many animals and is mediated by similar underlying mechanisms with common types of biological molecules and a complex history of the evolution of color vision within different animal taxa. In primates, color vision may have evolved under selective pressure for a variety of visual tasks including the foraging for nutritious young leaves, ripe fruit, and flowers, as well as detecting predator camouflage and emotional states in other primates. == Wavelength == Isaac Newton discovered that white light after being split into its component colors when passed through a dispersive prism could be recombined to make white light by passing them through a different prism. The visible light spectrum ranges from about 380 to 740 nanometers. Spectral colors (colors that are produced by a narrow band of wavelengths) such as red, orange, yellow, green, cyan, blue, and violet can be found in this range. These spectral colors do not refer to a single wavelength, but rather to a set of wavelengths: red, 625–740 nm; orange, 590–625 nm; yellow, 565–590 nm; green, 500–565 nm; cyan, 485–500 nm; blue, 450–485 nm; violet, 380–450 nm. Wavelengths longer or shorter than this range are called infrared or ultraviolet, respectively. Humans cannot generally see these wavelengths, but other animals may. === Hue detection === Sufficient differences in wavelength cause a difference in the perceived hue; the just-noticeable difference in wavelength varies from about 1 nm in the blue-green and yellow wavelengths to 10 nm and more in the longer red and shorter blue wavelengths. Although the human eye can distinguish up to a few hundred hues, when those pure spectral colors are mixed together or diluted with white light, the number of distinguishable chromaticities can be much higher. In very low light levels, vision is scotopic: light is detected by rod cells of the retina. Rods are maximally sensitive to wavelengths near 500 nm and play little, if any, role in color vision. In brighter light, such as daylight, vision is photopic: light is detected by cone cells which are responsible for color vision. Cones are sensitive to a range of wavelengths, but are most sensitive to wavelengths near 555 nm. Between these regions, mesopic vision comes into play and both rods and cones provide signals to the retinal ganglion cells. The shift in color perception from dim light to daylight gives rise to differences known as the Purkinje effect. The perception of "white" is formed by the entire spectrum of visible light, or by mixing colors of just a few wavelengths in animals with few types of color receptors. In humans, white light can be perceived by combining wavelengths such as red, green, and blue, or just a pair of complementary colors such as blue and yellow. === Non-spectral colors === There are a variety of colors in addition to spectral colors and their hues. These include grayscale colors, shades of colors obtained by mixing grayscale colors with spectral colors, violet-red colors, impossible colors, and metallic colors. Grayscale colors include white, gray, and black. Rods contain rhodopsin, which reacts to light intensity, providing grayscale coloring. Shades include colors such as pink or brown. Pink is obtained from mixing red and white. Brown may be obtained from mixing orange with gray or black. Navy is obtained from mixing blue and black. Violet-red colors include hues and shades of magenta. The light spectrum is a line on which violet is one end and the other is red, and yet we see hues of purple that connect those two colors. Impossible colors are a combination of cone responses that cannot be naturally produced. For example, medium cones cannot be activated completely on their own; if they were, we would see a 'hyper-green' color. == Dimensionality == Color vision is categorized foremost according to the dimensionality of the color gamut, which is defined by the number of primaries required to represent the color vision. This is generally equal to the number of photopsins expressed: a correlation that holds for vertebrates but not invertebrates. The common vertebrate ancestor possessed four photopsins (expressed in cones) plus rhodopsin (expressed in rods), so was tetrachromatic. However, many vertebrate lineages have lost one or many photopsin genes, leading to lower-dimension color vision. The dimensions of color vision range from 1-dimensional and up: == Physiology of color perception == Perception of color begins with specialized retinal cells known as cone cells. Cone cells contain different forms of opsin – a pigment protein – that have different spectral sensitivities. Humans contain three types, resulting in trichromatic color vision. Each individual cone contains pigments composed of opsin apoprotein covalently linked to a light-absorbing prosthetic group: either 11-cis-hydroretinal or, more rarely, 11-cis-dehydroretinal. The cones are conventionally labeled according to the ordering of the wavelengths of the peaks of their spectral sensitivities: short (S), medium (M), and long (L) cone types. These three types do not correspond well to particular colors as we know them. Rather, the perception of color is achieved by a complex process that starts with the differential output of these cells in the retina and which is finalized in the visual cortex and associative areas of the brain. For example, while the L cones have been referred to simply as red receptors, microspectrophotometry has shown that their peak sensitivity is in the greenish-yellow region of the spectrum. Similarly, the S cones and M cones do not directly correspond to blue and green, although they are often described as such. The RGB color model, therefore, is a convenient means for representing color but is not directly based on the types of cones in the human eye. The peak response of human cone cells varies, even among individuals with typical color vision; in some non-human species this polymorphic variation is even greater, and it may well be adaptive. === Theories === Two complementary theories of color vision are the trichromatic theory and the opponent process theory. The trichromatic theory, or Young–Helmholtz theory, proposed in the 19th century by Thomas Young and Hermann von Helmholtz, posits three types of cones preferentially sensitive to blue, green, and red, respectively. Others have suggested that the trichromatic theory is not specifically a theory of color vision but a theory of receptors for all vision, including color but not specific or limited to it. Equally, it has been suggested that the relationship between the phenomenal opponency described by Ewald Hering and the physiological opponent processes are not straightforward (see below), making of physiological opponency a mechanism that is relevant to the whole of vision, and not just to color vision alone. Hering proposed the opponent process theory in 1872. It states that the visual system interprets color in an antagonistic way: red vs. green, blue vs. yellow, black vs. white. Both theories are generally accepted as valid, describing different stages in visual physiology, visualized in the adjacent diagram. Green–magenta and blue–yellow are scales with mutually exclusive boundaries. In the same way that there cannot exist a "slightly negative" positive number, a single eye cannot perceive a bluish-yellow or a reddish-green. Although these two theories are both currently widely accepted theories, past and more recent work has led to criticism of the opponent process theory, stemming from a number of what are presented as discrepancies in the standard opponent process theory. For example, the phenomenon of an after-image of complementary color can be induced by fatiguing the cells responsible for color perception, by staring at a vibrant color for a length of time, and then looking at a white surface. This phenomenon of complementary colors shows that cyan, rather than green, is the complement of red, and that magenta, rather than red, is the complement of green. It therefore also shows that the reddish-green color supposed to be impossible by opponent process theory is actually the color yellow. Although this phenomenon is more readily explained by the trichromatic theory, explanations for the discrepancy may include alterations to the opponent process theory, such as redefining the opponent colors as red vs. cyan, to reflect this effect. Despite such criticis
Read more →
Unknown key-share attack

As defined by Blake-Wilson & Menezes (1999), an unknown key-share (UKS) attack on an authenticated key agreement (AK) or authenticated key agreement with key confirmation (AKC) protocol is an attack whereby an entity A {\displaystyle A} ends up believing she shares a key with B {\displaystyle B} , and although this is in fact the case, B {\displaystyle B} mistakenly believes the key is instead shared with an entity E ≠ A {\displaystyle E\neq A} . In other words, in a UKS, an opponent, say Eve, coerces honest parties Alice and Bob into establishing a secret key where at least one of Alice and Bob does not know that the secret key is shared with the other. For example, Eve may coerce Bob into believing he shares the key with Eve, while he actually shares the key with Alice. The “key share” with Alice is thus unknown to Bob.
Read more →
Virtual influencer

A virtual influencer, sometimes described as a virtual persona or virtual model, is a computer-generated fictional character that can be used for a variety of marketing-related purposes, but most frequently for social media marketing, in lieu of online human "influencers". Most virtual influencers are designed using computer graphics and motion capture technology to resemble real people in realistic situations. Common derivatives of virtual influencers include VTubers, which broadly refer to online entertainers and YouTubers who represent themselves using virtual avatars instead of their physical selves. == History == Virtual influencers are fundamentally synonymous with virtual idols, which originate from Japan's anime and Japanese idol culture that dates back to the 1980s. The first virtual idol created was Lynn Minmay, a fictional singer and main character of the anime television series Super Dimension Fortress Macross (1982) and the animated film adaptation Macross: Do You Remember Love? (1984). Minmay's success led to the production of more Japanese virtual idols, such as EVE from the Japanese cyberpunk anime Megazone 23 (1985), and Sharon Apple in Macross Plus (1994). Virtual idols were not always well received – in 1995, Japanese talent agency Horipro created Kyoko Date, which was inspired by the Macross franchise and dating sim games such as Tokimeki Memorial (1994). Date failed to gain commercial success despite drawing headlines for her debut as a CGI idol, largely due to technical limitations leading to issues such as unnatural movements, an issue also known as the uncanny valley. Since their inception, many virtual idols created have achieved continual success, with notable names including the Vocaloid singer Hatsune Miku, and the VTuber Kizuna AI. Technological advancements have also enabled production teams to use artificial intelligence and advanced techniques to customize the personalities and behavior of virtual idols. Due to modern-day advancements in technology, many virtual idols have held real-life tours and events. Notable ones include Hatsune Miku's titular tour Miku Expo and Hololive's concerts with many of their idols from their English, Japanese and Indonesian branches. Some notable events including virtual singers and influencers have included: Hatsune Miku opening for Lady Gaga in 2014 and Hoshimachi Suisei's concerts at the famous Budokan venue in Japan and her addition to the Forbes Japan list of '30 Under 30' individuals who are changing the world in their respective fields. == Benefits and criticism == From a branding perspective, virtual influencers are perceived to be much less likely to be mired in scandals. In China, celebrities caught in bad publicity such as singer Wang Leehom and entertainer Kris Wu have heightened the appeal of virtual influencers, since their existence relies entirely on computer-generated imagery and they are therefore unlikely to cause any damage to a brand's image by association. Some studies have also suggested that Generation Z consumers have a unique appetite for virtual idols and influencers, since they grew up in the age of the internet. Studies also show that human-like appearance of virtual influencers show higher message credibility than anime-like virtual influencers. Scholars and commentators have also questioned the ethics and cultural impact of virtual influencers, arguing that computer-generated personas can entrench unrealistic beauty standards while diffusing accountability for labor, identity, and consent. Business and marketing analysts have also warned that disclosure and governance remain inconsistent, recommending clearer guardrails and transparency when brands deploy synthetic spokespeople. In 2025, reporting highlighted concerns that AI-driven "virtual humans" could displace human creators and sales workers, intensifying debates over the future of creative labor and authenticity online. == Notable examples == === Virtual bands === Eternity - A South Korean virtual idol group formed by Pulse9. Gorillaz - A virtual band formed in 1998. K/DA - A virtual K-pop girl group created as part of the League of Legends video game franchise. MAVE: - A South Korean virtual girl group formed in 2023 by Metaverse Entertainment. Pentakill - A virtual heavy metal band created as part of the League of Legends video game franchise. Plave (band) - A South Korean virtual boy band formed by VLast. Squid Sisters and Off the Hook - Two virtual pop idol duos as part of the Splatoon series. Studio Killers - A Finnish-Danish-British virtual band formed in 2011. === Vocaloids === Hatsune Miku (modeled after Saki Fujita) Kagamine Rin/Len (modeled after Asami Shimoda) Megurine Luka (modeled after Yū Asakawa) Meiko (modeled after Meiko Haigō) Kaito (modeled after Naoto Fūga) === VTubers === Kano Kizuna AI Neuro-sama VShojo Ironmouse Projekt Melody Nijisanji Hololive Akai Haato Gawr Gura Hoshimachi Suisei Natsuiro Matsuri === Other examples === Ami Yamato Crazy Frog FN Meka IA Kuki AI Kyoko Date Kyra Miquela Naevis Shudu Gram
Read more →
Data deduplication

In computing, data deduplication is a technique for eliminating duplicate copies of repeating data. Successful implementation of the technique can improve storage utilization, which may in turn lower capital expenditure by reducing the overall amount of storage media required to meet storage capacity needs. It can also be applied to network data transfers to reduce the number of bytes that must be sent. The deduplication process requires comparison of data 'chunks' (also known as 'byte patterns') which are unique, contiguous blocks of data. These chunks are identified and stored during a process of analysis, and compared to other chunks within existing data. Whenever a match occurs, the redundant chunk is replaced with a small reference that points to the stored chunk. Given that the same byte pattern may occur dozens, hundreds, or even thousands of times (the match frequency is dependent on the chunk size), the amount of data that must be stored or transferred can be greatly reduced. A related technique is single-instance (data) storage, which replaces multiple copies of content at the whole-file level with a single shared copy. While possible to combine this with other forms of data compression and deduplication, it is distinct from newer approaches to data deduplication (which can operate at the segment or sub-block level). Deduplication is different from data compression algorithms, such as LZ77 and LZ78. Whereas compression algorithms identify redundant data inside individual files and encodes this redundant data more efficiently, the intent of deduplication is to inspect large volumes of data and identify large sections – such as entire files or large sections of files – that are identical, and replace them with a shared copy. == Functioning principle == For example, a typical email system might contain 100 instances of the same 1 MB (megabyte) file attachment. Each time the email platform is backed up, all 100 instances of the attachment are saved, requiring 100 MB storage space. With data deduplication, only one instance of the attachment is actually stored; the subsequent instances are referenced back to the saved copy for deduplication ratio of roughly 100 to 1. Deduplication is often paired with data compression for additional storage saving: Deduplication is first used to eliminate large chunks of repetitive data, and compression is then used to efficiently encode each of the stored chunks. In computer code, deduplication is done by, for example, storing information in variables so that they don't have to be written out individually but can be changed all at once at a central referenced location. Examples are CSS classes and named references in MediaWiki. == Benefits == Storage-based data deduplication reduces the amount of storage needed for a given set of files. It is most effective in applications where many copies of very similar or even identical data are stored on a single disk. In the case of data backups, which routinely are performed to protect against data loss, most data in a given backup remain unchanged from the previous backup. Common backup systems try to exploit this by omitting (or hard linking) files that haven't changed or storing differences between files. Neither approach captures all redundancies, however. Hard-linking does not help with large files that have only changed in small ways, such as an email database; differences only find redundancies in adjacent versions of a single file (consider a section that was deleted and later added in again, or a logo image included in many documents). In-line network data deduplication is used to reduce the number of bytes that must be transferred between endpoints, which can reduce the amount of bandwidth required. See WAN optimization for more information. Virtual servers and virtual desktops benefit from deduplication because it allows nominally separate system files for each virtual machine to be coalesced into a single storage space. At the same time, if a given virtual machine customizes a file, deduplication will not change the files on the other virtual machines—something that alternatives like hard links or shared disks do not offer. Backing up or making duplicate copies of virtual environments is similarly improved. == Classification == === Post-process versus in-line deduplication === Deduplication may occur "in-line", as data is flowing, or "post-process" after it has been written. With post-process deduplication, new data is first stored on the storage device and then a process at a later time will analyze the data looking for duplication. The benefit is that there is no need to wait for the hash calculations and lookup to be completed before storing the data, thereby ensuring that store performance is not degraded. Implementations offering policy-based operation can give users the ability to defer optimization on "active" files, or to process files based on type and location. One potential drawback is that duplicate data may be unnecessarily stored for a short time, which can be problematic if the system is nearing full capacity. Alternatively, deduplication hash calculations can be done in-line: synchronized as data enters the target device. If the storage system identifies a block which it has already stored, only a reference to the existing block is stored, rather than the whole new block. The advantage of in-line deduplication over post-process deduplication is that it requires less storage and network traffic, since duplicate data is never stored or transferred. On the negative side, hash calculations may be computationally expensive, thereby reducing the storage throughput. However, certain vendors with in-line deduplication have demonstrated equipment which performs in-line deduplication at high rates. Post-process and in-line deduplication methods are often heavily debated. === Data formats === The SNIA Dictionary identifies two methods: Content-agnostic data deduplication – a data deduplication method that does not require awareness of specific application data formats. Content-aware data deduplication – a data deduplication method that leverages knowledge of specific application data formats. === Source versus target deduplication === Another way to classify data deduplication methods is according to where they occur. Deduplication occurring close to where data is created, is referred to as "source deduplication". When it occurs near where the data is stored, it is called "target deduplication". Source deduplication ensures that data on the data source is deduplicated. This generally takes place directly within a file system. The file system will periodically scan new files creating hashes and compare them to hashes of existing files. When files with same hashes are found then the file copy is removed and the new file points to the old file. Unlike hard links however, duplicated files are considered to be separate entities and if one of the duplicated files is later modified, then using a system called copy-on-write a copy of that changed file or block is created. The deduplication process is transparent to the users and backup applications. Backing up a deduplicated file system will often cause duplication to occur resulting in the backups being bigger than the source data. Source deduplication can be declared explicitly for copying operations, as no calculation is needed to know that the copied data is in need of deduplication. This leads to a new form of link on file systems, called a reference-counted link, or reflink, in some systems (e.g. Linux), or a cloned file on macOS, where one or more inodes (file information entries) are made to share some or all of their data. It is named analogously to hard links, which work at the inode level, and symbolic links, which work at the filename level.The individual entries have a copy-on-write behavior that is non-aliasing, i.e. changing one copy afterwards will not affect other copies. Microsoft's ReFS also supports this operation. Target deduplication is the process of removing duplicates when the data was not generated at that location. Example of this would be a server connected to a SAN/NAS, The SAN/NAS would be a target for the server (target deduplication). The server is not aware of any deduplication, the server is also the point of data generation. A second example would be backup. Generally this will be a backup store such as a data repository or a virtual tape library. === Deduplication methods === One of the most common forms of data deduplication implementations works by comparing chunks of data to detect duplicates. For that to happen, each chunk of data is assigned an identification, calculated by the software, typically using cryptographic hash functions. In many implementations, the assumption is made that if the identification is identical, the data is identical, even though this cannot be true in all cases due to the pigeonhole principle; other implementations do not as
Read more →
GPT-5

GPT-5 is a multimodal large language model developed by OpenAI and the fifth in its series of generative pre-trained transformer (GPT) foundation models. Preceded in the series by GPT-4, it was launched on August 7, 2025. It is publicly accessible to users of the chatbot products ChatGPT and Microsoft Copilot as well as to developers through the OpenAI API. == Background == On April 14, 2023, Sam Altman, the chief executive officer of OpenAI, spoke at an event at the Massachusetts Institute of Technology and said that the company was not training GPT-5 at that time. He stated that OpenAI was "prioritizing GPT-4 development" and that "we are not and won't for some time" release GPT-5. On July 18, OpenAI filed for a "GPT-5" trademark in the United States. On November 13, Altman confirmed to the Financial Times that the company was working to develop GPT-5. According to The Information, "[f]or much of the second half of 2024, OpenAI was developing a model known internally as Orion and intended to become GPT-5", "[b]ut the Orion effort failed to produce a better model, and the company instead released it as GPT-4.5 in February [2025]." By late July 2025, OpenAI was widely anticipated as planning to release GPT-5 in early August. On July 30, The Verge reported that "Microsoft is getting ready for GPT-5" as "sources familiar with Microsoft's AI plans" told an editor that the company was testing a new mode for its Copilot chatbot that would offer a model that "thinks deeply or quickly based on the task". On August 5, in the leadup to the release of GPT-5, OpenAI released GPT-OSS, a set of two open-weight models that have reasoning capabilities. GPT-5 was then unveiled during a livestream event on August 7. == Capabilities == At the time of its release, GPT-5 had state-of-the-art performance on benchmarks that test mathematics, programming, finance, and multimodal understanding. According to OpenAI, improvements over its predecessor models include faster response times, better coding and writing skills, more accurate answers to health questions, and lower levels of hallucination. Also, compared to previous models, GPT-5 aims to give safe, high-level responses to potentially harmful queries rather than outright declining them, an approach that OpenAI refers to as "safe completions", aiming to result "in GPT-5 being able to refuse more unsafe questions, while offering fewer rejections to users seeking harmless information." In addition, GPT-5 was trained to give more critical, "less effusively agreeable" answers compared to its predecessor models. Days before the launch of GPT-5, two early testers of the model stated that they were "impressed" by its ability to code and to solve mathematical and scientific problems. They suggested that the model shows great improvement from GPT-4, but not as large of a gain as from GPT-3 to GPT-4. A day prior to the release of GPT-5, during a press briefing, Sam Altman, the chief executive officer of OpenAI, called GPT-5 "a significant step along the path to AGI", referring to artificial general intelligence, the hypothetical level of intelligence that OpenAI defines as the ability to perform any economically valuable task that a human can. According to Altman, GPT-5 is "significantly better" than its predecessors, offering "PhD-level" abilities across a wide range of tasks. The exact energy consumption of GPT-5 use has not been disclosed by OpenAI. Researchers at the University of Rhode Island estimated that a medium-length response consumes slightly over 18 watt-hours, equivalent to using an incandescent bulb for 18 minutes. === Architecture === GPT-5 is a system that contains a fast, high-throughput model, a deeper reasoning model, and a real-time router that decides which model to use based on conversation type, complexity, tool needs, and explicit user intent. Altman had previously criticized the manual model picker for being overly complex, suggesting a need for unification. GPT-5 also includes agentic functionality through which it can set up its own desktop and can use its browser to search autonomously for sources that relate to its task. The GPT-5 system card defines two fast, high-throughput models – gpt-5-main and gpt-5-main-mini – and two thinking models – gpt-5-thinking and gpt-5-thinking-mini. In the OpenAI API, developers can access the thinking model, its mini version, and gpt-5-thinking-nano, an even smaller and faster nano version of the thinking model. The version of GPT-5 that is accessible via the API has adjustable reasoning effort (low, medium, high, or minimal) and verbosity (low, medium, or high). Additionally, ChatGPT provides access to gpt-5-thinking with a setting that makes use of parallel test-time compute, referred to as gpt-5-thinking-pro. == Limitations == === Safety === Neuraltrust, a security research company, claimed to have successfully compromised GPT-5 within its first day of testing the model. According to its report, it enabled GPT-5 to generate detailed instructions for manufacturing explosive devices. SPLX, another company, conducted similar tests and came to similar conclusions about GPT-5's security. Their assessments suggest that GPT-5 has significant security gaps, potentially rendering it as being unsafe for use in a corporate environment. == Training == According to AIMultiple, GPT-5 is natively multimodal, meaning that it was trained from scratch on multiple modalities (like text and images) at once without relying on already-trained language or vision models. Its training process involved three stages: unsupervised pretraining, supervised fine-tuning, and reinforcement learning from human feedback. Pretraining used a large-scale multilingual dataset of books, articles, web pages, academic papers, and licensed sources. GPT-5's visual and text capabilities were described as having been developed alongside each other throughout training, unlike with GPT-4. == Use == GPT-5 is used in ChatGPT. Although GPT-5 is free for all ChatGPT users, Plus users get higher use limits while Pro users get unlimited access to GPT-5 as well as limited access to GPT-5 Pro. Standard limits for lower-tier users on responses per hour still apply. Additionally, with the introduction of GPT-5, ChatGPT's "Advanced Voice Mode" was replaced by "ChatGPT Voice", which is supposed to enable more natural-sounding conversations. OpenAI stated that "Standard Voice Mode retires on September 9, 2025, unifying all users on ChatGPT Voice". On November 24, 2025, the feature of shopping research was added to ChatGPT, claimed to be a mini model post-trained on gpt-5-thinking-mini. GPT-5 is also available in Microsoft Copilot, and Microsoft stated that it will incorporate GPT-5 into a wide variety of its products. According to 9to5Mac, Apple Inc. is planning to integrate the model into the Apple Intelligence feature in its iOS 26, iPadOS 26, and macOS Tahoe operating systems. It is also accessible via the OpenAI API. A number of American companies were reported as having received access to GPT-5 ahead of its launch. OpenAI stated that the private health insurance company Oscar Health was checking applications from its policyholders with the model. In addition, Uber was using GPT-5 for its customer support system; GitLab, Windsurf, and Cursor were using the model for software development; and the Spanish bank BBVA was using it for financial analysis. Other companies that OpenAI listed as having used GPT-5 pre-release include Amgen, Lowe's, and Notion. == Reception == === Critical reviews === Grace Huckins in MIT Technology Review found that, "[w]hereas o1 was a major technological advancement, GPT-5 is, above all else, a refined product." In response to claims that Sam Altman, the chief executive officer of OpenAI, had made about the model, she stated that "GPT-5 will furnish a more pleasant and seamless user experience. That's not nothing, but it falls far short of the transformative AI future that Altman has spent much of the past year hyping." In response to Altman's claim that GPT-5 is "a significant step along the path" to artificial general intelligence, she noted: "[M]aybe he's right—but if so, it's a very small step." In The Information, Stephanie Palazzolo praised GPT-5's coding capabilities. According to Matteo Wong in The Atlantic, GPT-5 "is intuitive, fast, and efficient; adapts to human preferences and intentions; and is easy to personalize." He stated: "At this stage of the AI boom, when every major chatbot is legitimately helpful in numerous ways, benchmarks, science, and rigor feel almost insignificant. What matters is how the chatbot feels [...]". John Herrman from the New York magazine wrote: "Casual users who encounter GPT-5 through ChatGPT aren't likely to feel like they're using a completely different product [...] while people who use it for software development or in a corporate context are more likely to notice a major change." Mashable's Christian de Looper found that "GPT-5
Read more →
SocialIQ

Social IQ (formerly Soovox Inc.) was a San Diego-based influencer marketing platform that measured users' online social influence and connected them with brands for word-of-mouth marketing campaigns. The company was founded in 2009 by Akram Benmbarek and was headquartered in San Diego, California. == History == Akram Benmbarek, who had previously worked in technology finance at Advanced Equities Financial Corp and in wealth management at Morgan Stanley, Merrill Lynch, and UBS, founded the company in mid-2009 under the name Soovox. In October 2011, Benmbarek rebranded the company as SocialIQ. At that time, the company was seeking a Series A round of venture capital, having raised under $1 million in angel seed funding. == Similar metrics == Klout PeerIndex
Read more →
Contrast set learning

Contrast set learning is a form of association rule learning that seeks to identify meaningful differences between separate groups by reverse-engineering the key predictors that identify for each particular group. For example, given a set of attributes for a pool of students (labeled by degree type), a contrast set learner would identify the contrasting features between students seeking bachelor's degrees and those working toward PhD degrees. == Overview == A common practice in data mining is to classify, to look at the attributes of an object or situation and make a guess at what category the observed item belongs to. As new evidence is examined (typically by feeding a training set to a learning algorithm), these guesses are refined and improved. Contrast set learning works in the opposite direction. While classifiers read a collection of data and collect information that is used to place new data into a series of discrete categories, contrast set learning takes the category that an item belongs to and attempts to reverse engineer the statistical evidence that identifies an item as a member of a class. That is, contrast set learners seek rules associating attribute values with changes to the class distribution. They seek to identify the key predictors that contrast one classification from another. For example, an aerospace engineer might record data on test launches of a new rocket. Measurements would be taken at regular intervals throughout the launch, noting factors such as the trajectory of the rocket, operating temperatures, external pressures, and so on. If the rocket launch fails after a number of successful tests, the engineer could use contrast set learning to distinguish between the successful and failed tests. A contrast set learner will produce a set of association rules that, when applied, will indicate the key predictors of each failed tests versus the successful ones (the temperature was too high, the wind pressure was too high, etc.). Contrast set learning is a form of association rule learning. Association rule learners typically offer rules linking attributes commonly occurring together in a training set (for instance, people who are enrolled in four-year programs and take a full course load tend to also live near campus). Instead of finding rules that describe the current situation, contrast set learners seek rules that differ meaningfully in their distribution across groups (and thus, can be used as predictors for those groups). For example, a contrast set learner could ask, “What are the key identifiers of a person with a bachelor's degree or a person with a PhD, and how do people with PhD's and bachelor’s degrees differ?” Standard classifier algorithms, such as C4.5, have no concept of class importance (that is, they do not know if a class is "good" or "bad"). Such learners cannot bias or filter their predictions towards certain desired classes. As the goal of contrast set learning is to discover meaningful differences between groups, it is useful to be able to target the learned rules towards certain classifications. Several contrast set learners, such as MINWAL or the family of TAR algorithms, assign weights to each class in order to focus the learned theories toward outcomes that are of interest to a particular audience. Thus, contrast set learning can be thought of as a form of weighted class learning. === Example: Supermarket Purchases === The differences between standard classification, association rule learning, and contrast set learning can be illustrated with a simple supermarket metaphor. In the following small dataset, each row is a supermarket transaction and each "1" indicates that the item was purchased (a "0" indicates that the item was not purchased): Given this data, Association rule learning may discover that customers that buy onions and potatoes together are likely to also purchase hamburger meat. Classification may discover that customers that bought onions, potatoes, and hamburger meats were purchasing items for a cookout. Contrast set learning may discover that the major difference between customers shopping for a cookout and those shopping for an anniversary dinner are that customers acquiring items for a cookout purchase onions, potatoes, and hamburger meat (and do not purchase foie gras or champagne). == Treatment learning == Treatment learning is a form of weighted contrast-set learning that takes a single desirable group and contrasts it against the remaining undesirable groups (the level of desirability is represented by weighted classes). The resulting "treatment" suggests a set of rules that, when applied, will lead to the desired outcome. Treatment learning differs from standard contrast set learning through the following constraints: Rather than seeking the differences between all groups, treatment learning specifies a particular group to focus on, applies a weight to this desired grouping, and lumps the remaining groups into one "undesired" category. Treatment learning has a stated focus on minimal theories. In practice, treatment are limited to a maximum of four constraints (i.e., rather than stating all of the reasons that a rocket differs from a skateboard, a treatment learner will state one to four major differences that predict for rockets at a high level of statistical significance). This focus on simplicity is an important goal for treatment learners. Treatment learning seeks the smallest change that has the greatest impact on the class distribution. Conceptually, treatment learners explore all possible subsets of the range of values for all attributes. Such a search is often infeasible in practice, so treatment learning often focuses instead on quickly pruning and ignoring attribute ranges that, when applied, lead to a class distribution where the desired class is in the minority. === Example: Boston housing data === The following example demonstrates the output of the treatment learner TAR3 on a dataset of housing data from the city of Boston (a nontrivial public dataset with over 500 examples). In this dataset, a number of factors are collected for each house, and each house is classified according to its quality (low, medium-low, medium-high, and high). The desired class is set to "high", and all other classes are lumped together as undesirable. The output of the treatment learner is as follows: Baseline class distribution: low: 29% medlow: 29% medhigh: 21% high: 21% Suggested Treatment: [PTRATIO=[12.6..16), RM=[6.7..9.78)] New class distribution: low: 0% medlow: 0% medhigh: 3% high: 97% With no applied treatments (rules), the desired class represents only 21% of the class distribution. However, if one filters the data set for houses with 6.7 to 9.78 rooms and a neighborhood parent-teacher ratio of 12.6 to 16, then 97% of the remaining examples fall into the desired class (high-quality houses). == Algorithms == There are a number of algorithms that perform contrast set learning. The following subsections describe two examples. === STUCCO === The STUCCO contrast set learner treats the task of learning from contrast sets as a tree search problem where the root node of the tree is an empty contrast set. Children are added by specializing the set with additional items picked through a canonical ordering of attributes (to avoid visiting the same nodes twice). Children are formed by appending terms that follow all existing terms in a given ordering. The formed tree is searched in a breadth-first manner. Given the nodes at each level, the dataset is scanned and the support is counted for each group. Each node is then examined to determine if it is significant and large, if it should be pruned, and if new children should be generated. After all significant contrast sets are located, a post-processor selects a subset to show to the user - the low order, simpler results are shown first, followed by the higher order results which are "surprising and significantly different." The support calculation comes from testing a null hypothesis that the contrast set support is equal across all groups (i.e., that contrast set support is independent of group membership). The support count for each group is a frequency value that can be analyzed in a contingency table where each row represents the truth value of the contrast set and each column variable indicates the group membership frequency. If there is a difference in proportions between the contrast set frequencies and those of the null hypothesis, the algorithm must then determine if the differences in proportions represent a relation between variables or if it can be attributed to random causes. This can be determined through a chi-square test comparing the observed frequency count to the expected count. Nodes are pruned from the tree when all specializations of the node can never lead to a significant and large contrast set. The decision to prune is based on: The minimum deviation size: The maximum difference between the support
Read more →
Talim (textiles)

Talim (Kashmiri: تعليم, Kashmiri pronunciation: [t̪əːliːm], Urdu: تَعْلِیم, Arabic: تعليم, pronounced [taʕ.liːm] ) in textiles is a symbolic code and system of notation that facilitates the creation of intricate patterns in fabrics, such as shawls and carpets, and the written coded plans that include colour schemes and weaving instructions. The term is used in traditional hand-weaving in the Indian subcontinent. Talim was initially used to create certain types of patterns in Kashmiri shawls, and later came to be applied in the production of carpets. == Etymology and origin == The term talim, which refers to a symbolic code and system of notation used by shawl and carpet artisans in their weaving processes, came to the Urdu language from the Arabic noun taʻlim (تعليم), which means "authoritative instruction", "teaching", or "edification". It means the same in Urdu and Kashmiri. The Arabic noun originated from the second form of the Arabic root verb ʻalima (علم), which means "to know". According to a local belief in Kashmir, talim was introduced to them by Persian scholar and Sufi Muslim saint Mir Sayyid Ali Hamadani. The belief notwithstanding, talim might have originated from Kashmir; Amritsar was the only place outside of Srinagar where talim was used, by migrated Kashmiri artisans. == Technique == Whereas carpets are generally woven horizontally, providing weavers with a clear view of the progress they are making in creating designs, in Kashmir, carpets are woven vertically, so the weaver is reliant on the talim. The talim technique forms fabrics by passing the weft thread as per a given script that has design codes. Weavers use talim to weave the desired pattern with planned colours. Talim involves teamwork when applying the technique, as the process of creating intricate fabric designs in weaving begins with the Naqash (designer, who designs using pencils on graphs) meticulously crafting the design on a blank sheet of paper called a naska, and the master, Talim guru, making the colour codes and symbols for weft yarns that would interlace the warp to construct the desired design. He writes on a long strip of paper, in specific symbols, the colour codes, and the number of knots to be woven with each colour. Taraha guru collaborates with talim guru and is known as the artisan responsible for determining the colours. Talim uthana is a process or the act of "picking the codes" from the graph. A clerk called the Talim Navis would record the step-by-step instructions for these numbers and colours, and thousands of low-paid and interchangeable weavers would read or recite the record to carry out the design. Afterward, a talim copyist makes copies, which are needed when multiple looms weave the same product. The script, which has been encoded, is deciphered and translated according to the specific guidelines of weavers in order to incorporate the design that is included within it. Talim has been compared to "hieroglyphics" or as a "notational-cum-cryptographic system", as it is challenging to decipher and is unique to the shawls of Kashmir, which requires expertise to comprehend. According to researcher Gagan Deep Kaur, "The talim is widely held to be a trade secret of the community and has always been fiercely guarded by the owners." Those who use talim for shawl-making do not assign important tasks to women, because of the fear that the technique and knowledge may be divulged to other communities when the women are sent there to be married. The coded cards known as talim in the Kashmiri language were used for creating certain types of patterns in shawl weaving. The talim technique is employed in the creation of kani shawls, which originated from the Kanihama region of the Kashmir valley. Carpet weaving adapted the technique from shawl making. When Kashmiri artisans started to create carpets, they chose to continue using the talim rather than switching to a different method. The resurgence of the carpet industry in Amritsar during the last century resulted in the prevalent use of the talim technique among the local weavers, a majority of whom hailed from the region of Kashmir. === Recitation of codes === Talim was also communicated through recitation accompanied by a melodic chant or song. In traditional weaving practices, the use of chanting was common. The movement of the shuttles was synchronised with the song of the weaver, adding a musical rhythm to the instructions represented through hieroglyphics. The weaver's chant, "Two blue, one red, three yellow, two blue," served as a guide as they wove and replicated the designated pattern. == Usage == The first factories established in Amritsar around 1860 utilised Bokhara designs. However, Kashmiri weavers maintained their traditional techniques and employed the talim, instead of a cartoon, for tying knots. As a result, Amritsar became the second location in the Indian subcontinent to use the talim. The traditional weaving practices are still carried out in some parts of the Indian subcontinent. The exact date when talim was last used in the subcontinent varies depending on the region and the specific weaving community. Indian textile historian Jasleen Dhamija wrote in her 1989 book Handwoven Fabrics of India that there were still some weavers in the Kashmiri village of Kanihama who applied talim in weaving shawls. As of 2022, the carpet weavers in Kashmir were the only remaining users of talim in carpets, according to Zubair Ahmed, director of the Indian Institute of Carpet Technology. The institute aims to preserve traditional Kashmiri carpet designs by digitising talim and training weavers in the technique. == Gallery ==
Read more →
Yahoo Groups

Yahoo! Groups was a free-to-use system of electronic mailing lists offered by Yahoo!. Prior to February 2020, Yahoo! Groups was one of the world's largest collections of online discussion boards. It allowed members to subscribe to various groups, read subscribed discussions online, view and share photos, files and bookmarks within a group, access a group calendar, create polls for group members, and receive email notifications of new discussion topics. Some groups were simply announcement boards, to which only the group moderators could post, while others were discussion forums. Depending on each group's settings, membership could be open to everyone or only to invited or approved people. On February 1, 2020, Yahoo! removed online access to discussions and all other features except simple membership management, essentially turning all groups into mailing lists, and on October 13, 2020, it announced that Yahoo Groups would shut down completely on December 15, 2020. == History == In 1998 Yahoo! Clubs was launched as an extension of services developed by Yahoo! Messenger. In August 2000 Yahoo acquired eGroups.com. Yahoo! Groups was launched in early 2001 as an integration of technology from eGroups.com and community groups from both eGroups.com and Yahoo! Clubs. In 2001 Yahoo! deleted adult groups from its search directory, making it very difficult to locate Yahoo! groups with adult content. The Groups Updates Email feature was introduced in 2010. It summarized, in a single email, all the updates that occurred every twenty-four hours in all groups. In September 2010, a major facelift was rolled out, making Yahoo! Groups look very similar to Facebook. In December, Yahoo! Groups Japan emailed its users and posted a notice on its homepage, to announce that its service, which commenced in February 2004, would be closing on May 28, 2014. In October 2019, Yahoo! announced that all content that had been posted to Yahoo! Groups will be deleted on December 14, 2019; that date was later amended to January 31, 2020. Yahoo! announced that adding new content would be blocked on October 28, 2019. Once the content was deleted, users of Yahoo! Groups were only able to browse the group directory, request invitations and, if members of a group, send messages to that group. On October 13, 2020, Yahoo! announced they would be shutting down Yahoo! Groups on December 15, 2020. The site was closed down a few days after the advertised date, displaying a message that the service was officially shut down. This message stopped appearing at the end of January 2021 and the Yahoo! Groups web address began redirecting to the main Yahoo! page. === Criticism and controversy === On August 31, 2010, Yahoo! Groups started rolling out a major software change, which was denounced by a large number of users. The re-model was completely abandoned on January 12, 2011. == Site statistics == In August 2008, Yahoo! Group staff reported that there were 113 million users, and nine million Groups using 22 languages. In July 2010, the web analytics website Quantcast reported around 915 thousand unique visitors daily to the Yahoo! Groups website (US). In January 2011, that number had increased to 933 thousand unique visitors daily. The number did not include Yahoo! Group members who accessed the Groups site via email. In September 2010, at its "Product Runway" event, Yahoo! told reporters that Yahoo! Groups had 115 million group members and that there were 10 million Yahoo! groups. == Archives ==
Read more →
Content management

Content management (CM) are a set of processes and technologies that support the collection, managing, and publishing of information in any form or medium. When stored and accessed via computers, this information may be more specifically referred to as digital content, or simply as content. Digital content may take the form of text (such as electronic documents), images, multimedia files (such as audio or video files), or any other file type that follows a content lifecycle requiring management. The process of content development and management is complex enough that various commercial software vendors (large and small), such as Interwoven and Microsoft, offer content management software to control and automate significant aspects of the content lifecycle. == Process == Content management practices and goals vary by mission and by organizational governance structure. News organizations, e-commerce websites, and educational institutions all use content management, but in different ways. This leads to differences in terminology and in the names and number of steps in the process. For example, some digital content is created by one or more authors. Over time that content may be edited. One or more individuals may provide some editorial oversight, approving the content for publication. Publishing may take many forms: it may be the act of "pushing" content out to others, or simply granting digital access rights to certain content to one or more individuals. Later that content may be superseded by another version of the content and thus retired or removed from use (as when this wiki page is modified). Content management is an inherently collaborative process. It often consists of the following basic roles and responsibilities: Creator – responsible for creating and editing content. Editor – responsible for tuning the content message and the style of delivery, including translation and localization. Publisher – responsible for releasing the content for use. Administrator – responsible for managing access permissions to folders, collections and files, usually accomplished by assigning access rights to user groups or roles. Admins may also assist and support users in various ways. Consumer, viewer or guest – the person who reads or otherwise consumes the content after it is published or shared. A critical aspect of content management is the ability to manage versions of content as it evolves (see also version control). Authors and editors often need to restore older versions of edited products due to a process failure or an undesirable series of edits. Time-sensitive content may also require updates as the subject matter evolves over time. Another equally important aspect of content management involves the creation, maintenance, and application of review standards. Each member of the content creation and review process has a unique role and set of responsibilities in the development or publication of the content. Each review team member requires clear and concise review standards. These must be maintained on an ongoing basis to ensure the long-term consistency and health of the knowledge base. A content management system is a set of automated processes that may support the following features: Import and creation of documents and multimedia material Identification of all key users and their roles The ability to assign roles and responsibilities to different instances of content categories or types Definition of workflow tasks often coupled with messaging so that content managers are alerted to changes in content The ability to track and manage multiple versions of a single instance of content The ability to publish the content to a repository to support access The ability to personalize content based on a set of rules Increasingly, the repository is an inherent part of the system, and incorporates enterprise search and retrieval. Content management systems take the following forms: Web content management system—software for web site management (often what content management implicitly means) Output of a newspaper editorial staff organization Workflow for article publication Document management systems Knowledge management software Single source content management system—content stored in chunks within a relational database Variant management system—where personnel tag source content (usually text and graphics) to represent variants stored as single source "master" content modules, resolved to the desired variant at publication (for example: automobile owners manual content for 12 model years stored as single master content files and "called" by model year as needed)—often used in concert with database chunk storage (see above) for large content objects == Governance structures == Content management expert Marc Feldman defines three primary content management governance structures: localized, centralized, and federated—each having its unique strengths and weaknesses. === Localized governance === By putting control in the hands of those closest to the content, the context experts, localized governance models empower and unleash creativity. These benefits come, however, at the cost of a partial-to-total loss of managerial control and oversight. === Centralized governance === When the levers of control are strongly centralized, content management systems are capable of delivering an exceptionally clear and unified brand message. Moreover, centralized content management governance structures allow for a large number of cost-savings opportunities in large enterprises, realized, for example, through (1) the avoidance of duplicated efforts in creating, editing, formatting, repurposing and archiving content; (2) process management and the streamlining of all content related labor; and/or (3) an orderly deployment or updating of the content management system. === Federated governance === Federated governance models potentially realize the benefits of both localized and centralized control while avoiding the weaknesses of both. While content management software systems are inherently structured to enable federated governance models, realizing these benefits can be difficult because it requires, for example, negotiating the boundaries of control with local managers and content creators. In the case of larger enterprises, in particular, the failure to fully implement or realize a federated governance structure equates to a failure to realize the full return on investment and cost savings that content management systems enable. == Implementation == Content management implementations must be able to manage content distributions and digital rights in content life cycle. Content management systems are usually involved with digital rights management in order to control user access and digital rights. In this step, the read-only structures of digital rights management systems force some limitations on content management, as they do not allow authors to change protected content in their life cycle. Creating new content using managed (protected) content is also an issue that gets protected contents out of management controlling systems. A few content management implementations cover all these issues.
Read more →
Social profiling

Social profiling is the process of constructing a social media user's profile using their social data. In general, profiling refers to the data science process of generating a person's profile with computerized algorithms and technology. There are various platforms for sharing this information with the proliferation of growing popular social networks, including but not limited to LinkedIn, Google+, Facebook and Twitter. == Social profile and social data == A person's social data refers to the personal data that they generate either online or offline (for more information, see social data revolution). A large amount of these data, including one's language, location and interest, is shared through social media and social network. Users join multiple social media platforms and their profiles across these platforms can be linked using different methods to obtain their interests, locations, content, and friend list. Altogether, this information can be used to construct a person's social profile. Meeting the user's satisfaction level for information collection is becoming more challenging. This is because of too much "noise" generated, which affects the process of information collection due to explosively increasing online data. Social profiling is an emerging approach to overcome the challenges faced in meeting user's demands by introducing the concept of personalized search while keeping in consideration user profiles generated using social network data. A study reviews and classifies research inferring users social profile attributes from social media data as individual and group profiling. The existing techniques along with utilized data sources, the limitations, and challenges were highlighted. The prominent approaches adopted include machine learning, ontology, and fuzzy logic. Social media data from Twitter and Facebook have been used by most of the studies to infer the social attributes of users. The literature showed that user social attributes, including age, gender, home location, wellness, emotion, opinion, relation, influence are still need to be explored. === Personalized meta-search engines === The ever-increasing online content has resulted in the lack of proficiency of centralized search engine's results. It can no longer satisfy user's demand for information. A possible solution that would increase coverage of search results would be meta-search engines, an approach that collects information from numerous centralized search engines. A new problem thus emerges, that is too much data and too much noise is generated in the collection process. Therefore, a new technique called personalized meta-search engines was developed. It makes use of a user's profile (largely social profile) to filter the search results. A user's profile can be a combination of a number of things, including but not limited to, "a user's manual selected interests, user's search history", and personal social network data. == Social media profiling == According to Samuel D. Warren II and Louis Brandeis (1890), disclosure of private information and the misuse of it can hurt people's feelings and cause considerable damage in people's lives. Social networks provide people access to intimate online interactions; therefore, information access control, information transactions, privacy issues, connections and relationships on social media have become important research fields and are subjects of concern to the public. Ricard Fogues and other co-authors state that "any privacy mechanism has at its base an access control", that dictate "how permissions are given, what elements can be private, how access rules are defined, and so on". Current access control for social media accounts tend to still be very simplistic: there is very limited diversity in the category of relationships on for social network accounts. User's relationships to others are, on most platforms, only categorized as "friend" or "non-friend" and people may leak important information to "friends" inside their social circle but not necessarily users to they consciously want to share the information to. The below section is concerned with social media profiling and what profiling information on social media accounts can achieve. === Privacy leaks === A lot of information is voluntarily shared on online social networks, such as photos and updates on life activities (new job, hobbies, etc.). People rest assured that different social network accounts on different platforms will not be linked as long as they do not grant permission to these links. However, according to Diane Gan, information gathered online enables "target subjects to be identified on other social networking sites such as Foursquare, Instagram, LinkedIn, Facebook and Google+, where more personal information was leaked". The majority of social networking platforms use the "opt out approach" for their features. If users wish to protect their privacy, it is user's own responsibility to check and change the privacy settings as a number of them are set to default option. A major social network platforms have developed geo-tag functions and are in popular usage. This is concerning because 39% of users have experienced profiling hacking; 78% burglars have used major social media networks and Google Street-view to select their victims; and an astonishing 54% of burglars attempted to break into empty houses when people posted their status updates and geo-locations. === Facebook === Formation and maintenance of social media accounts and their relationships with other accounts are associated with various social outcomes. In 2015, for many firms, customer relationship management is essential and is partially done through Facebook. Before the emergence and prevalence of social media, customer identification was primarily based upon information that a firm could directly acquire: for example, it may be through a customer's purchasing process or voluntary act of completing a survey/loyalty program. However, the rise of social media has greatly reduced the approach of building a customer's profile/model based on available data. Marketers now increasingly seek customer information through Facebook; this may include a variety of information users disclose to all users or partial users on Facebook: name, gender, date of birth, e-mail address, sexual orientation, marital status, interests, hobbies, favorite sports team(s), favorite athlete(s), or favorite music, and more importantly, Facebook connections. However, due to the privacy policy design, acquiring true information on Facebook is no trivial task. Often, Facebook users either refuse to disclose true information (sometimes using pseudonyms) or setting information to be only visible to friends, Facebook users who "LIKE" your page are also hard to identify. To do online profiling of users and cluster users, marketers and companies can and will access the following kinds of data: gender, the IP address and city of each user through the Facebook Insight page, who "LIKED" a certain user, a page list of all the pages that a person "LIKED" (transaction data), other people that a user follow (even if it exceeds the first 500, which we usually can not see) and all the publicly shared data. === Twitter === First launched on the Internet in March 2006, Twitter is a platform on which users can connect and communicate with any other user in just 280 characters. Like Facebook, Twitter is also a crucial tunnel for users to leak important information, often unconsciously, but able to be accessed and collected by others. According to Rachel Nuwer, in a sample of 10.8 million tweets by more than 5,000 users, their posted and publicly shared information are enough to reveal a user's income range. A postdoctoral researcher from the University of Pennsylvania, Daniel Preoţiuc-Pietro and his colleagues were able to categorize 90% of users into corresponding income groups. Their existing collected data, after being fed into a machine-learning model, generated reliable predictions on the characteristics of each income group. The mobile app called Streamd.in displays live tweets on Google Maps by using geo-location details attached to the tweet, and traces the user's movement in the real world. === Profiling photos on social network === The advent and universality of social media networks have boosted the role of images and visual information dissemination. Many types of visual information on social media transmit messages from the author, location information and other personal information. For example, a user may post a photo of themselves in which landmarks are visible, which can enable other users to determine where they are. In a study done by Cristina Segalin, Dong Seon Cheng and Marco Cristani, they found that profiling user posts' photos can reveal personal traits such as personality and mood. In the study, convolutional neural networks (CNNs) is introduced. It builds on the main characteristics of computational
Read more →
Cryptographic High Value Product

Cryptographic High Value Product (CHVP) is a designation used within the information security community to identify assets that have high value, and which may be used to encrypt / decrypt secure communications, but which do not retain or store any classified information. When disconnected from the secure communication network, the CHVP equipment may be handled with a lower level of controls than required for COMSEC equipment.
Read more →
Educational robotics

Educational robotics teaches the design, analysis, application and operation of robots. Robots include articulated robots, mobile robots or autonomous vehicles. Educational robotics can be taught from elementary school to graduate programs. Robotics may also be used to motivate and facilitate the instruction other, often foundational, topics such as computer programming, artificial intelligence or engineering design. == Education and training == Robotics engineers design robots, maintain them, develop new applications for them, and conduct research to expand the potential of robotics. Robots have become a popular educational tool in some middle and high schools, as well as in numerous youth summer camps, raising interest in programming, artificial intelligence and robotics among students. First-year computer science courses at several universities now include programming of a robot in addition to traditional software engineering-based coursework. == Category of Educational robotics == The categories of educational robots seen as having more than one category. It can be alienated into different categories based on their physical design and coding method. Generally they are categorised as arm robots, wheeled mobile robots and humanoid robots. Tangibly, coded robots uses a physical means of coding instead of the screens coding. === Initiatives in schools === Leachim, was a robot teacher programmed with the class curricular, as well as certain biographical information on the 40 students whom it was programmed to teach. Leachim could synthesize human speech using Diphone synthesis. It was invented by Michael J. Freeman in 1974 and was tested in a fourth grade classroom in the Bronx, New York. === Post-secondary degree programs === From approximately 1960 through 2005, robotics education at post-secondary institutions took place through elective courses, thesis experiences and design projects offered as part of degree programs in traditional academic disciplines, such as mechanical engineering, electrical engineering, industrial engineering or computer science. Since 2005, more universities have begun granting degrees in robotics as a discipline in its own right, often under the name "Robotic Engineering". Based on a 2015 web-based survey of robotics educators, the degree programs and their estimates annual graduates are listed alphabetically below. Note that only official degree programs where the word "robotics" appears on the transcript or diploma are listed here; whereas degree programs in traditional disciplines with course concentrations or thesis topics related to robotics are deliberately omitted. === Certification === The Robotics Certification Standards Alliance (RCSA) is an international robotics certification authority that confers various industry- and educational-related robotics certifications. === Summer robotics camp === Several summer camp programs include robotics as part of their core curriculum. In addition, youth summer robotics programs are frequently offered by celebrated museums such as the American Museum of Natural History and The Tech Museum of Innovation in Silicon Valley, CA, just to name a few. There are of benefits that come from attending robotics camps. It teaches students how to use teamwork, resilience and motivation, and decision-making. Students learn teamwork because most camps involve exciting activities requiring teamwork. Resilience and motivation is expected because by completing the challenging programs, students feel talented and accomplished after they complete the program. Also students are given unique situations making them make decisions to further their situation. === Educational robotics in special education === Educational robotics can be a useful tool in early and special education. According to a journal on new perspectives in science education, educational robotics can help to develop abilities that promote autonomy and assist their integration into society. Social and personal skills can also be developed through educational robotics. Using Lego Mindstorms NXT, schoolteachers were able to work with middle school aged children in order to develop programs and improve the children's social and personal skills. Additionally, problem solving skills and creativity were utilized through the creation of artwork and scenery to house the robots. Other studies show the benefits of educational robotics in special education as promoting superior cognitive functions, including executive functions. This can lead to an increased ability in "problem solving, reasoning and planning in typically developing preschool children." Through eight weeks of weekly forty-five-minute group sessions using the Bee-Bot, an increase in interest, attention, and interaction between both peers and adults was found in the school and preschool-aged children with Down Syndrome. This study suggests that educational robotics in the classroom can also lead to an improvement in visuo-spatial memory and mental planning. Furthermore, executive functions seemed to be possible in one child during this study.
Read more →
Menu hack

A menu hack is a non-standard method of ordering food, usually at fast-food or fast casual restaurants, that offers a different result than what is explicitly stated on a menu. Menu hacks may range from a simple alternate flavor to "gaming the system" in order to obtain more food than normal. They are often spread on social media platforms such as TikTok, and are more popular with Generation Z, which has been known to customize their orders more than previous generations. Hacks are sometimes officially added to the menu after their popularity grows. However, in some cases, they have been criticized for overburdening fast food employees with outlandish requests, sparking debate as to whether certain menu hacks are unethical. The list of all possible menu hacks is called a secret menu. == History == The term "menu hack" stems from hacker culture and its tradition of overcoming previously imposed limitations. However, the tradition of ordering from a secret menu dates back to the early days of fast food. "Animal style" fries, a word of mouth menu item ordered from In-N-Out since the 1960s, was rumored to have been created by local surfers. In the Information Age, the rise of social media gave influencers the ability to communicate unique food combinations to their followers, which proved to go viral easily. Design mistakes in food ordering apps also proved to be easily exploitable. In some cases, these hacks boosted the profile of brands on social media, while in others, they caused financial harm when the company was unprepared to handle the sudden influx of unusual orders. One restaurant chain notable for the phenomenon is Chipotle Mexican Grill. A viral hack from Alexis Frost, suggesting a quesadilla with fajita vegetables inside, dipped in Chipotle vinaigrette mixed with sour cream, obtained 1.9 million views on TikTok, overloading the chain's workers, who had to work harder to prepare more vegetables and vinaigrette. Some restaurants began to deny the dish to customers, forcing them to only order meat and cheese on quesadillas. The company ultimately left the dish on the menu, but urged customers to stop ordering it via social media. When it later officially added the Fajita Quesadilla to the menu, digital sales nearly doubled. A method to order nachos, which are not officially on the menu, was also noted by customers. Starbucks is also famous for menu hacks, including the Pink Drink, a "Barbiecore" beverage in which coconut milk replaced the water in the strawberry açaí refresher. After it went viral, the company made it a permanent menu item and distributed it bottled in grocery stores. == Controversy == Menu hacks have been subject to a growing backlash, with employees stating that they "dread" younger customers due to the proliferation of unusual orders. Service industry workers, already overworked and underpaid, have called the rise of menu hacks and their difficulty to make an additional reason to unionize and demand higher wages.
Read more →
List of cryptography journals

List of cryptography journals includes notable peer-reviewed academic journals that focus on cryptography, cryptanalysis, information security, and related areas in computer science and mathematics. == Notable journals == Cryptologia Designs, Codes and Cryptography IEEE Transactions on Information Theory International Journal of Information Security Journal of Cryptology Journal of Computer Security ACM Transactions on Privacy and Security Information Processing Letters Information and Computation
Read more →