AI Avatar Kids

AI Avatar Kids — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Traceability

Traceability is the capability to trace something. In some cases, it is interpreted as the ability to verify the history, location, or application of an item by means of documented recorded identification. Other common definitions include the capability (and implementation) of keeping track of a given set or type of information to a given degree, or the ability to chronologically interrelate uniquely identifiable entities in a way that is verifiable. Traceability is applicable to measurement, supply chain, software development, healthcare and security. == Measurement == The term measurement traceability or metrological traceability is used to refer to an unbroken chain of comparisons relating an instrument's measurements to a known standard. Calibration to a traceable standard can be used to determine an instrument's bias, precision, and accuracy. It may also be used to show a chain of custody—from current interpretation of evidence to the actual evidence in a legal context, or history of handling of any information. In many countries, national standards for weights and measures are maintained by a National Metrological Institute (NMI) which provides the highest level of standards for the calibration / measurement traceability infrastructure in that country. Examples of government agencies include the National Physical Laboratory, UK (NPL) the National Institute of Standards and Technology (NIST) in the USA, the Physikalisch-Technische Bundesanstalt (PTB) in Germany, the Instituto Nazionale di Ricerca Metrologica (INRiM) in Italy, and the National Research Council of Canada (NRC). As defined by NIST, "Traceability of measurement requires the establishment of an unbroken chain of comparisons to stated references each with a stated uncertainty." A clock providing traceable time is traceable to a time standard such as Coordinated Universal Time or International Atomic Time. The Global Positioning System is a source of traceable time. === Food processing === In food processing (meat processing, fresh produce processing), the term traceability refers to the recording through means of barcodes or RFID tags and other tracking media, all movement of product and steps within the production process. One of the key reasons this is such a critical point is in instances where an issue of contamination arises, and a recall is required. Where traceability has been closely adhered to, it is possible to identify, by precise date/time and exact location which goods must be recalled, and which are safe, potentially saving millions of dollars in the recall process. Traceability within the food processing industry is also utilised to identify key high production and quality areas of a business, versus those of low return, and where points in the production process may be improved. In food processing software, traceability systems imply the use of a unique piece of data (e.g., order date/time or a serialized sequence number, generally through the use of a barcode / RFID) which can be traced through the entire production flow, linking all sections of the business, including suppliers and future sales through the supply chain. Messages and files at any point in the system can then be audited for correctness and completeness, using the traceability software to find the particular transaction and/or product within the supply chain. In food systems, ISO 22005, as part of the ISO 22000 family of standards, has been developed to define the principles for food traceability and specifies the basic requirements for the design and implementation of a feed and food traceability system. It can be applied by an organization operating at any step in the feed and food chain. The European Union's General Food Law came into force in 2002, making traceability compulsory for food and feed operators and requiring those businesses to implement traceability systems. The EU introduced its Trade Control and Expert System, or TRACES, in April 2004. The system provides a central database to track movement of animals within the EU and from third countries. Australia has its National Livestock Identification System to keep track of livestock from birth to slaughterhouse. India has started taking initiatives for setting up traceability systems at Government and Corporate levels. Grapenet, an initiative by Agriculture and Processed Food Products Export Development Authority (APEDA), Ministry of Commerce, Government of India is an example in this direction. GrapeNet is an internet based traceability software system for monitoring fresh grapes exported from India to the European Union. GrapeNet is a first of its kind initiative in India that has put in place an end-to-end system for monitoring pesticide residue, achieve product standardization and facilitate tracing back from pallets to the farm of the Indian grower, through the various stages of sampling, testing, certification and packing. Grapenet won the National Award (Gold), in the winners announced for the best e-Governance initiatives undertaken in India in 2007. The Directorate Generate Foreign Trade (DGFT), Government of India, through its notification dated 04.02.2009 relating to Amendment in Foreign Trade Policy (RE2008)has mandated that Export to the European Union is permitted subject to registration with APEDA, thereby making Grapenet mandatory for all exports of fresh grapes from India to Europe. Uruguay has also designed a system called "Traceability & Electronic Information System of the Beef Industry". Traceability in food supply can also refer to practices employed by individual companies, including Ritual and Amway's Nutrilite. In the case of Nutrilite's supplements, ingredients are documented and tested throughout farming, processing, and manufacturing to ensure traceability at each stage of production. == Systems and software development == In systems and software development, the term traceability (or requirements traceability) refers to the ability to link product requirements back to stakeholders' rationales and forward to corresponding design artifacts, code, and test cases. Traceability supports numerous software engineering activities such as change impact analysis, compliance verification or traceback of code, regression test selection, and requirements validation. It is usually accomplished in the form of a matrix created for the verification and validation of the project. Unfortunately, the practice of constructing and maintaining a requirements trace matrix (RTM) can be very arduous and over time the traces tend to erode into an inaccurate state unless date/time stamped. Alternate automated approaches for generating traces using information retrieval methods have been developed. The IEEE defines traceability as "(1)The degree to which a relationship can be established between two or more products of the development process, especially products having a predecessor, successor or master-subordinate relationship to one another. For example, the degree to which the requirements and design of a given software component match. See also: consistency. " and "(2) The degree to which each element in a software development product establishes its reason for existing; for example, the degree to which each element in a bubble chart references the requirement that it satisfies." In transaction processing software, traceability implies use of a unique piece of data (e.g., order date/time or a serialized sequence number) which can be traced through the entire software flow of all relevant application programs. Messages and files at any point in the system can then be audited for correctness and completeness, using the traceability key to find the particular transaction. This is also sometimes referred to as the transaction footprint. == Health care == Patient safety during healthcare service plays an important role in preventing delayed recovery or even mortality, by increasing and improving the quality of life of citizens, and is considered an indicator of the quality status of health services Maintaining patient safety is a complex task and involves factors inherent to the environment and human actions. New technologies facilitate the traceability tools of patients and medications. This is particularly relevant for drugs that are considered high risk and cost. Recent research in the healthcare industry emphasizes the significant impact of Blockchain Technology (BCT) on improving the performance of healthcare supply chain management. It highlights BCT's role in enhancing transparency, data immutability, and efficient management, leading to better cooperation among stakeholders and effective risk mitigation in healthcare services. The World Health Organization has recognized the importance of traceability for medical products of human origin (MPHO) and urged member states "to encourage the implementation of globally consistent coding systems to facilitate national and international traceability". == Security and cri
Read more →
Index locking

In databases an index is a data structure, part of the database, used by a database system to efficiently navigate access to user data. Index data are system data distinct from user data, and consist primarily of pointers. Changes in a database (by insert, delete, or modify operations), may require indexes to be updated to maintain accurate user data accesses. Index locking is a technique used to maintain index integrity. A portion of an index is locked during a database transaction when this portion is being accessed by the transaction as a result of attempt to access related user data. Additionally, special database system transactions (not user-invoked transactions) may be invoked to maintain and modify an index, as part of a system's self-maintenance activities. When a portion of an index is locked by a transaction, other transactions may be blocked from accessing this index portion (blocked from modifying, and even from reading it, depending on lock type and needed operation). Index Locking Protocol guarantees that phantom read phenomenon won't occur. Index locking protocol states: Every relation must have at least one index. A transaction can access tuples only after finding them through one or more indices on the relation A transaction Ti that performs a lookup must lock all the index leaf nodes that it accesses, in S-mode, even if the leaf node does not contain any tuple satisfying the index lookup (e.g. for a range query, no tuple in a leaf is in the range) A transaction Ti that inserts, updates or deletes a tuple ti in a relation r must update all indices to r and it must obtain exclusive locks on all index leaf nodes affected by the insert/update/delete The rules of the two-phase locking protocol must be observed. Specialized concurrency control techniques exist for accessing indexes. These techniques depend on the index type, and take advantage of its structure. They are typically much more effective than applying to indexes common concurrency control methods applied to user data. Notable and widely researched are specialized techniques for B-trees (B-Tree concurrency control) which are regularly used as database indexes. Index locks are used to coordinate threads accessing indexes concurrently, and typically shorter-lived than the common transaction locks on user data. In professional literature, they are often called latches.
Read more →
Data item

A data item describes an atomic state of a particular object concerning a specific property at a certain time point. A collection of data items for the same object at the same time forms an object instance (or table row). Any type of complex information can be broken down to elementary data items (atomic state). Data items are identified by object (o), property (p) and time (t), while the value (v) is a function of o, p and t: v = F(o,p,t). Values typically are represented by symbols like numbers, texts, images, sounds or videos. Values are not necessarily atomic. A value's complexity depends on the complexity of the property and time component. When looking at databases or XML files, the object is usually identified by an object name or other type of object identifier, which is part of the "data". Properties are defined as columns (table row), properties (object instance) or tags (XML). Often, time is not explicitly expressed and is an attribute applying to the complete data set. Other data collections provide time on the instance level (time series), column level, or even attribute/property level.
Read more →
Transparency in the software supply chain

Transparency in the software supply chain is a condition in which participants involved in the development, procurement, operation, auditing, or regulation of software can determine which components, dependencies, build stages, identifiers, and relationships within the supply chain make up the delivered product. The disclosure of information about software components, their interrelationships, origins, and development methods—for the purposes of risk management, vulnerability detection, and compliance—takes place throughout the software lifecycle. Transparency is one of the key security attributes of the software supply chain, as a deeper understanding of the chain enables participants to identify vulnerabilities and mitigate threats. Problems in the software supply chain can cause billions in losses and create operational challenges for government and commercial entities, as demonstrated by incidents involving SolarWinds, Bybit, 3CX, Jaguar Land Rover, GitHub, and NotPetya. Modern software is often assembled from third-party libraries and open-source components. According to research by the Linux Foundation and Synopsys, 96% of the commercial codebases analyzed contained open-source software, and 70–90% of a typical codebase may consist of open-source components. Without transparency, any software component can become a threat. As a result, companies may spend billions of dollars building robust external defenses, but this will not protect against vulnerabilities in legitimate software inside the perimeter. At the same time, supply chain attacks also erode trust between customers and their IT providers, as malicious code is often embedded in official updates with certificates and digital signatures. One of the primary ways to ensure transparency is through a software bill of materials, which documents the components used to create the software and the relationships within the supply chain. == Concept == The software supply chain is the collection of systems, devices, people, artifacts, and processes involved in the creation of the final software product. Attacks on the software supply chain differ from conventional attacks in that they follow a four-stage pattern: compromise, modification, distribution, and subsequent exploitation of the compromised or modified component. A defining feature of a supply chain attack is the introduction or manipulation of a change at an upstream stage, which is subsequently exploited at a downstream stage. Transparency refers to the availability of knowledge about the chain, while validity concerns the integrity of operations and artifacts and the authentication of participants, and separation involves reducing unnecessary trust relationships and the radius of impact through compartmentalization. In this framework, transparency primarily helps during the pre-compromise and detection phases, as a clearer understanding of participants, operations, and artifacts makes it easier to identify weak links before attackers exploit them. Current major attack vectors include dependencies and containers, build infrastructure, and human participants, such as maintainers or developers. == History == Software supply-chain transparency developed from earlier efforts to document software components, long before the term came into widespread use in the cybersecurity field. Early component-documentation formats included SPDX, first published in 2011, and CycloneDX, first published in 2017. Initially, these formats were created to support license compliance, package identification, and tool compatibility. Their development helped shape a broader concept of software supply chain transparency, encompassing component documentation, disclosure practices, risk management, security analysis, and regulatory compliance. In 2018, the U.S. National Telecommunications and Information Administration launched a multistakeholder process on promoting software component transparency. This process helped move work on SBOMs from a specialized technical practice into the realm of policy and procurement to identify components used in software products. The 2020 compromise of the SolarWinds Orion platform made software supply chain security a central issue in government cybersecurity policy. An analysis of the “Sunburst” campaign prepared by the Atlantic Council noted that the vulnerability of the software supply chain had become a realized risk for national-security agencies. In May 2021, U.S. President Joe Biden issued Executive Order 14028, which directed federal agencies to improve cybersecurity and increase transparency in the software supply chain, including requirements related to SBOMs. Reuters reported that the executive order required software developers selling their products to the federal government to provide greater visibility into their software and make security data available. In July 2021, the NTIA published the document “The Minimum Elements for a Software Bill of Materials (SBOM)”, defining the basic data fields and practices for creating SBOMs. Between 2021 and 2025, the U.S. Cybersecurity and Infrastructure Security Agency updated its guidance on “Framing Software Component Transparency”, expanding the set of SBOM attributes, metadata requirements, and operational recommendations for the creation, exchange, and use of SBOMs. Major incidents that occurred following the SolarWinds attack have underscored the importance of transparency in vulnerability management and supply chain security. The Log4Shell vulnerability in the Log4j library, disclosed in December 2021, demonstrated how difficult it can be for organizations to identify a vulnerable component deeply embedded within applications and services. In 2024, an attempt to plant a backdoor in XZ Utils showed how attackers could exploit trust in open-source maintenance processes to introduce malicious code into widely used infrastructure software. By the mid-2020s, software supply chain transparency had become part of international cybersecurity coordination and regulation. On September 3, 2025, Japan's Ministry of Economy, Trade and Industry and the National Cybersecurity Office, in collaboration with cybersecurity agencies from 15 countries, released the document “A Shared Vision of Software Bill of Materials (SBOM) for Cybersecurity.” In the European Union, the Cyber Resilience Act required manufacturers of products with digital elements to create, maintain, and retain SBOMs as part of the technical documentation for software placed on the EU market. == Transparency mechanisms == The primary mechanism for ensuring transparency is the software bill of materials (SBOM). An SBOM is a structured list of components, libraries, and tools used to build and distribute a software product, and it records dependencies in a way that helps organizations understand and assess their software supply chains. It can also be described as a formal record of components and their interdependencies, which gives users insight into their actual exposure to risks and threats. Five key areas of SBOM application in software supply chain security have been identified: vulnerability management, ensuring transparency, component evaluation, risk assessment, and ensuring supply chain integrity. In software supply chains, an SBOM documents all components, both open-source and proprietary. Under Executive Order 14028, U.S. federal agencies require software suppliers to provide SBOMs for government-procured software. The list of minimum required SBOM elements defined by NTIA includes three main categories: required data fields for describing each component (name, version, identifiers), automation support (machine-readable format, generation tools), and recommendations for creating SBOMs during development and purchasing. The post-2021 push for SBOMs was intended to provide visibility into the components used within software and to expose parts of an application that would otherwise remain hidden. This information can be used to prioritize patches, manage vulnerabilities, and support compliance work. Transparency also supports software traceability, which is becoming a standard feature of developer platforms. Traceability has become important because organizations are increasingly required to demonstrate how software was created, rather than simply listing its components. Higher levels of assurance require signed, tamper-proof traceability and more isolated, verifiable build environments. A related mechanism is build reproducibility. Reproducible builds are defined as build processes that make the compilation process deterministic, ensuring that the same source code always produces the same binary file. These builds are considered a foundational element for distributed verification, transparency-log maintenance, supply-chain workflow integration, and the creation of keyless signatures based on verifiable logs. Although reproducibility does not replace inventory or attestation, it gives external par
Read more →
Landmark point

In morphometrics, landmark point or shortly landmark is a point in a shape object in which correspondences between and within the populations of the object are preserved. In other disciplines, landmarks may be known as vertices, anchor points, control points, sites, profile points, 'sampling' points, nodes, markers, fiducial markers, etc. Landmarks can be defined either manually by experts or automatically by a computer program. There are three basic types of landmarks: anatomical landmarks, mathematical landmarks or pseudo-landmarks. An anatomical landmark is a biologically-meaningful point in an organism. Usually experts define anatomical points to ensure their correspondences within the same species. Examples of anatomical landmark in shape of a skull are the eye corner, tip of the nose, jaw, etc. Anatomical landmarks determine homologous parts of an organism, which share a common ancestry. Mathematical landmarks are points in a shape that are located according to some mathematical or geometrical property, for instance, a high curvature point or an extreme point. A computer program usually determines mathematical landmarks used for an automatic pattern recognition. Pseudo-landmarks are constructed points located between anatomical or mathematical landmarks. A typical example is an equally spaced set of points between two anatomical landmarks to get more sample points from a shape. Pseudo-landmarks are useful during shape matching, when the matching process requires a large number of points.
Read more →
PenTile matrix family

PenTile matrix is a family of patented subpixel matrix schemes used in electronic device displays. PenTile is a trademark of Samsung. PenTile matrices are used in AMOLED and LCD displays. These subpixel layouts are specifically designed to operate with proprietary algorithms for subpixel rendering embedded in the display driver, allowing plug and play compatibility with conventional RGB (Red-Green-Blue) stripe panels. == Overview == "PenTile Matrix" (a neologism from penta-, meaning "five" in Greek and tile) describes the geometric layout of the prototypical subpixel arrangement developed in the early 1990s. The layout consists of a quincunx comprising two red subpixels, two green subpixels, and one central blue subpixel in each unit cell. It was inspired by biomimicry of the human retina, which has nearly equal numbers of L and M type cone cells, but significantly fewer S cones. As the S cones are primarily responsible for perceiving blue colors, which do not appreciably affect the perception of luminance, reducing the number of blue subpixels with respect to the red and green subpixels in a display does not reduce the image quality. However, the layout may cause color leakage image distortion, which can be reduced by filters. In some cases the layout causes reduced moiré and blockiness compared to conventional RGB layouts. The PenTile layout is specifically designed to work with and be dependent upon subpixel rendering that uses only one and a quarter subpixel per pixel, on average, to render an image. That is, that any given input pixel is mapped to either a red-centered logical pixel, or a green-centered logical pixel. === History === PenTile was invented by Candice H. Brown Elliott, for which she was awarded the Society for Information Display's Otto Schade Prize in 2014. The technology was licensed by the company Clairvoyante from 2000 until 2008, during which time several prototype PenTile displays were developed by a number of Asian liquid crystal display (LCD) manufacturers. In March 2008, Samsung Electronics acquired Clairvoyante's PenTile IP assets. Samsung then funded a new company, Nouvoyance, Inc. to continue development of the PenTile technology. == PenTile RGBG == PenTile RGBG layout used in AMOLED and plasma displays uses green pixels interleaved with alternating red and blue pixels. The human eye is most sensitive to green, especially for high resolution luminance information. The green subpixels are mapped to input pixels on a one-to-one basis. The red and blue subpixels are subsampled, reconstructing the chroma signal at a lower resolution. The luminance signal is processed using adaptive subpixel rendering filters to optimize reconstruction of high spatial frequencies from the input image, wherein the green subpixels provide the majority of the reconstruction. The red and blue subpixels are capable of reconstructing the horizontal and vertical spatial frequencies, but not the highest of the diagonal. Diagonal high spatial frequency information in the red and blue channels of the input image are transferred to the green subpixels for image reconstruction. Thus the RG-BG scheme creates a color display with one third fewer subpixels than a traditional RGB-RGB scheme but with the same measured luminance display resolution. This is similar to the Bayer filter commonly used in digital cameras. === Devices === As of 2021, "almost all" OLED screens in portable consumer devices use some form of Pentile subpixel layout. == PenTile RGBW == PenTile RGBW technology, used in LCD, adds an extra subpixel to the traditional red, green and blue subpixels that is a clear area without color filtering material and with the only purpose of letting backlight come through, hence W for white. This makes it possible to produce a brighter image compared to an RGB-matrix while using the same amount of power, or produce an equally bright image while using less power. The PenTile RGBW layout uses each red, green, blue and white subpixel to present high-resolution luminance information to the human eyes' red-sensing and green-sensing cone cells, while using the combined effect of all the color subpixels to present lower-resolution chroma (color) information to all three cone cell types. Combined, this optimizes the match of display technology to the biological mechanisms of human vision. The layout uses one third fewer subpixels for the same resolution as the RGB stripe (RGB-RGB) layout, in spite of having four color primaries instead of the conventional three, using subpixel rendering combined with metamer rendering. Metamer rendering optimizes the energy distribution between the white subpixel and the combined red, green, and blue subpixels: W <> RGB, to improve image sharpness. The display driver chip has an RGB to RGBW color vector space converter and gamut mapping algorithm, followed by metamer and subpixel rendering algorithms. In order to maintain saturated color quality, to avoid simultaneous contrast error between saturated colors and peak white brightness, while simultaneously reducing backlight power requirements, the display backlight brightness is under control of the PenTile driver engine. When the image is mostly desaturated colors, those near white or grey, the backlight brightness is significantly reduced, often to less than 50% peak, while the LCD levels are increased to compensate. When the image has very bright saturated colors, the backlight brightness is maintained at higher levels. The PenTile RGBW also has an optional high-brightness mode that doubles the brightness of the desaturated color image areas, such as black-and-white text, for improved outdoor viewability. === Devices === Motorola MC65 Motorola ES55 Motorola ES400 Motorola Atrix 4G Samsung Galaxy Note 10.1 2014 version Lenovo Yoga 2 Pro Lenovo Yoga 3 Pro HP ENVY TouchSmart 14-k022tx Sleekbook MSI GS60 Ghost Pro 4K Lenovo IdeaPad Y50 4K Asus ZenBook UX303LN 4K Asus ZenBook Pro UX501JW LG UH7500/6500/6100 LG ThinQ G7/G7+ Oculus Quest 1 == Controversy == An ongoing controversy regarding the definition or measurement of resolution of color subpixelated flat panel displays led many people to question the resolution claims of PenTile display products. Journalists have noted that in "just about every flat-panel TV in existence, each pixel is composed of one red, one green, and one blue subpixel (RGB), all of uniform size". In traditional flat-panel screens, the resolution is defined by the number of red, green, and blue subpixels, in groups of three, in an array in each axis. As a result, each pixel or group of subpixels can render any colour on the screen, regardless of neighbouring pixels. This is not the case with PenTile screens. The Video Electronics Standards Association (VESA) method of measuring and defining resolution in color displays is to measure the contrast of line pairs, requiring a minimum of 50% Michelson contrast for displays intended for rendering text. The developers of PenTile displays use this VESA criterion for contrast of line pairs to calculate the resolutions specified. In the RGBG layout the alternate red and blue subpixels are 'shared' or sub-sampled with neighboring pixels. Due to the one third lower subpixel density on PenTile displays the pixel structure may be more visible when compared to RGB stripe displays with the same pixel density. The loss of subpixels for a given resolution specification has led some journalists to describe the use of PenTile as "shady practice" and "sort of cheating". For a given size and resolution specification, the PenTile screen can appear grainy, pixelated, speckled, with blurred text on some saturated colors and backgrounds when compared to RGB stripe color. This effect is understood to be caused by the restriction of the number of subpixels that may participate in the image reconstruction when colors are highly saturated to primaries. In the RGBW case, this is caused as the W subpixel will not be available in order to maintain the saturated color. In the RGBG case, this effect will occur when the color boundary is primarily red or blue, as the fully populated (one green per pixel) sub-pixel cannot contribute. For all other cases, text and especially full color images are effectively reconstructed. == Advantages and disadvantages == The PenTile layout reduces the number of subpixels needed to create a specified resolution. Consequently it is possible to achieve an HD resolution on a PenTile AMOLED screen at lower cost than other technologies, and most reviewers note that "300 ppi" (as per VESA - not full pixels) resolution displays (such as Samsung Galaxy S III) make the PenTile effect less obvious than lower resolution PenTile displays (Droid Razr). The second advantage is lower power consumption: the HTC One S's use of a PenTile display makes it more energy efficient and thinner than equivalent LCD screens, giving it better battery life than the HTC One X's IPS LCD. A PenTile AMOLED screen is also
Read more →
Pray.com

Pray.com is a Christian social networking service and mobile application designed to facilitate religious communities. Launched in 2016, it was founded by Steve Gatena, Michael Lynn, Ryan Beck and Matthew Potter. The platform offers features for social networking, daily prayers, sermons, biblical content, and podcasts. The COVID-19 pandemic significantly increased Pray.com's user base, with downloads surging by 955%. During this period, the platform collaborated with churches to support virtual ministry services as in-person gatherings were restricted. The Federal Election Commission issued an opinion in 2021 that allows the platform to feature members of the United States Congress. Pray.com serves as a specialized social media platform for religious groups. Congregations can establish their own groups where members and leaders can participate in discussions, livestream services, and manage donations. Additionally, users can join "prayer communities" to post and respond to prayer requests. For those who subscribe to premium services, the platform provides access to biblically-inspired meditations and bedtime stories, and Bible stories for children. Pray.com also produces Radio drama-style productions with notable actors such as Kristen Bell and Blair Underwood narrating biblical stories. == History == === Funding and development === Pray.com has secured significant funding to support its development and growth. In 2017, the platform raised $2 million in seed funding from Science Inc., Greylock Partners, and Spark Capital. This was followed by a Series A funding round in March 2018, in which the company secured an additional $14 million from TPG Growth, Science Inc., and Greylock Partners. Founder Steve Gatena has highlighted difficulties in securing funding, noting some venture capitalists' negative attitudes towards faith-based technology. === Clinical studies === There have been clinical studies on Pray.com. In one study, the app was found to be acceptable and easy to use among racial and ethnic minority groups, with participants reporting improved mental health and well-being. Greater app use was associated with better outcomes, though low and variable usage suggests the need for further research to fully understand its impact. Another study examined Pray.com's impact on mental health by assigning 192 participants to use the app freely, use its meditative prayer function, or not use it at all. Over two months, participants reported overall improvements in mental health and well-being. Although no significant differences were found between groups, greater app usage correlated with better mental health outcomes. This suggests that religiously based mobile apps may help improve mental health and well-being. Another study of pray.com had similar findings. === National Day of Prayer === Pray first hosted a National Day of Prayer event in 2020 when it streamed to nearly one million viewers on Facebook. In 2021, Pray hosted a virtual event for the National Day of Prayer in the United States. The event featured remarks from public figures including United States President Joe Biden and former Vice President Mike Pence. President Biden spoke of his faith and prayed for an end to the COVID-19 pandemic. Biden remarked: "It means the world to me to know that there are people across the country who include Jill and me in their prayers. And I hope you know that you and your families are in our prayers as well. Today I am praying for the end of this great COVID crisis." The event featured musical performances from Gary Valenciano, Brooke Ligertwood from the Christian band Hillsong Worship, Lecrae, Heather Headley and Michael Neale. Other notable speakers included Ronnie Floyd, Ed Young, Mark Driscoll, and Samuel Rodriguez. Pray.com partnered with Sirius XM, DirecTV and Facebook to stream the event across multiple platforms. Pray.com was featured as a pop-up channel on Sirius XM, channel 154, to host the prayer event and celebrate people of all faith. === Partnerships and sponsorships === In 2024, Pray.com partnered with Sting Ray Robb as the primary sponsor for his No. 41 Chevrolet in the 2024 NTT IndyCar Series. The partnership, highlighting Robb's Christian faith, aims to engage younger audiences with faith-based content. The car, featuring Pray.com's branding, was set to debut at the Firestone Grand Prix of St. Petersburg. A partnership with Palantir Technologies for use of its AI systems was also announced in 2024. === Censorship in China === The app was removed from Apple's App Store in China as part of the country's broader efforts to restrict access to religious content. The app was targeted due to China's stringent regulations on religious material, particularly content distributed through digital platforms. The removal aligns with China's ongoing campaign to control online religious expression and maintain state-approved religious activities.
Read more →
Sample (graphics)

In computer graphics, a sample is an intersection of a channel and a pixel. The diagram below depicts a 24-bit pixel, consisting of 3 samples for Red, Green, and Blue. In this particular diagram, the Red sample occupies 9 bits, the Green sample occupies 7 bits and the Blue sample occupies 8 bits, totaling 24 bits per pixel. Note that the samples do not have to be equal size and not all samples are mandatory in a pixel. Also, a pixel can consist of more than 3 samples (e.g. 4 samples of the RGBA color space). A sample is related to a subpixel on a physical display.
Read more →
Multiple buffering

In computer science, multiple buffering is the use of more than one buffer to hold a block of data, so that a "reader" will see a complete (though perhaps old) version of the data instead of a partially updated version of the data being created by a "writer". It is very commonly used for computer display images. It is also used to avoid the need to use dual-ported RAM (DPRAM) when the readers and writers are different devices. == Description == === Double buffering Petri net === The Petri net in the illustration shows double buffering. Transitions W1 and W2 represent writing to buffer 1 and 2 respectively while R1 and R2 represent reading from buffer 1 and 2 respectively. At the beginning, only the transition W1 is enabled. After W1 fires, R1 and W2 are both enabled and can proceed in parallel. When they finish, R2 and W1 proceed in parallel and so on. After the initial transient where W1 fires alone, this system is periodic and the transitions are enabled – always in pairs (R1 with W2 and R2 with W1 respectively). == Double buffering in computer graphics == In computer graphics, double buffering is a technique for drawing graphics that shows less stutter, tearing, and other artifacts. It is difficult for a program to draw a display so that pixels do not change more than once. For instance, when updating a page of text, it is much easier to clear the entire page and then draw the letters than to somehow erase only the pixels that are used in old letters but not in new ones. However, this intermediate image is seen by the user as flickering. In addition, computer monitors constantly redraw the visible video page (traditionally at around 60 times a second), so even a perfect update may be visible momentarily as a horizontal divider between the "new" image and the un-redrawn "old" image, known as tearing. === Software double buffering === A software implementation of double buffering has all drawing operations store their results in some region of system RAM; any such region is often called a "back buffer". When all drawing operations are considered complete, the whole region (or only the changed portion) is copied into the video RAM (the "front buffer"); this copying is usually synchronized with the monitor's raster beam in order to avoid tearing. Software implementations of double buffering necessarily require more memory and CPU time than single buffering because of the system memory allocated for the back buffer, the time for the copy operation, and the time waiting for synchronization. Compositing window managers often combine the "copying" operation with "compositing" used to position windows, transform them with scale or warping effects, and make portions transparent. Thus, the "front buffer" may contain only the composite image seen on the screen, while there is a different "back buffer" for every window containing the non-composited image of the entire window contents. === Page flipping === In the page-flip method, instead of copying the data, both buffers are capable of being displayed. At any one time, one buffer is actively being displayed by the monitor, while the other, background buffer is being drawn. When the background buffer is complete, the roles of the two are switched. The page-flip is typically accomplished by modifying a hardware register in the video display controller—the value of a pointer to the beginning of the display data in the video memory. The page-flip is much faster than copying the data and can guarantee that tearing will not be seen as long as the pages are switched over during the monitor's vertical blanking interval—the blank period when no video data is being drawn. The currently active and visible buffer is called the front buffer, while the background page is called the back buffer. == Triple buffering == In computer graphics, triple buffering is similar to double buffering but can provide improved performance. In double buffering, the program must wait until the finished drawing is copied or swapped before starting the next drawing. This waiting period could be several milliseconds during which neither buffer can be touched. In triple buffering, the program has two back buffers and can immediately start drawing in the one that is not involved in such copying. The third buffer, the front buffer, is read by the graphics card to display the image on the monitor. Once the image has been sent to the monitor, the front buffer is flipped with (or copied from) the back buffer holding the most recent complete image. Since one of the back buffers is always complete, the graphics card never has to wait for the software to complete. Consequently, the software and the graphics card are completely independent and can run at their own pace. Finally, the displayed image was started without waiting for synchronization and thus with minimum lag. Due to the software algorithm not polling the graphics hardware for monitor refresh events, the algorithm may continuously draw additional frames as fast as the hardware can render them. For frames that are completed much faster than interval between refreshes, it is possible to replace a back buffers' frames with newer iterations multiple times before copying. This means frames may be written to the back buffer that are never used at all before being overwritten by successive frames. Nvidia has implemented this method under the name "Fast Sync". An alternative method sometimes referred to as triple buffering is a swap chain three buffers long. After the program has drawn both back buffers, it waits until the first one is placed on the screen, before drawing another back buffer (i.e. it is a 3-long first in, first out queue). Most Windows games seem to refer to this method when enabling triple buffering. == Quad buffering == The term quad buffering is the use of double buffering for each of the left and right eye images in stereoscopic implementations, thus four buffers total (if triple buffering was used then there would be six buffers). The command to swap or copy the buffer typically applies to both pairs at once, so at no time does one eye see an older image than the other eye. Quad buffering requires special support in the graphics card drivers which is disabled for most consumer cards. AMD's Radeon HD 6000 Series and newer support it. 3D standards like OpenGL and Direct3D support quad buffering. == Double buffering for DMA == The term double buffering is used for copying data between two buffers for direct memory access (DMA) transfers, not for enhancing performance, but to meet specific addressing requirements of a device (particularly 32-bit devices on systems with wider addressing provided via Physical Address Extension). Windows device drivers are a place where the term "double buffering" is likely to be used. Linux and BSD source code calls these "bounce buffers". Some programmers try to avoid this kind of double buffering with zero-copy techniques. == Other uses == Double buffering is also used as a technique to facilitate interlacing or deinterlacing of video signals.
Read more →
Intrapixel and Interpixel processing

Intrapixel and Interpixel processing is used in the processing of computers graphics, as well as sensors and images in equipment such as cameras. For computer graphics, CMOS sensor processing is done in pixel level. This process includes two general categories: intrapixel processing, where the processing is performed on the individual pixel signals, and interpixel processing, where the processing is performed locally or globally on signals from several pixels. The purpose of interpixel processing is to perform early vision processing, not merely to capture images. Intrapixel and Interpixel processing is an integral part of spatial processing within the earth Mixed Spatial Attraction Model. This also includes use within hyperspectral image processing.
Read more →
Jeremy Renner Official

Jeremy Renner Official (or Jeremy Renner on the Google Play Store) was a mobile app created by American actor Jeremy Renner. He created the app in March 2017 to hear the input and comments of his fans. The app was shut down in September 2019 in part due to the frequent bullying and trolling that the platform had experienced. The app featured optional microtransactions, with some ranging up to roughly US$400 despite the app itself being free. Upon shutting down the app, Renner issued a mass-refund for the collectible "stars" in the app for purchases made within the last ninety days, from the day the announcement was posted. He then posted an apology to the app itself, and the app was deleted from both the Google Play Store and the App Store shortly after. == Usage == Upon downloading the app, the user was faced with a video of Renner speaking about his fans and superfans, regular giveaways, and real-life updates. While the app was active, Renner posted regular questions and comments for fans. Renner occasionally livestreamed about his work and day-to-day life. The community developed to include memes, selfies, and a "Happy Rennsday" event on Wednesdays. == History == === 2017–2019 === The app launched in March 2017 with a promotional contest. Renner's fans were encouraged to download the app and create comments about being Renner's biggest fan; Renner would then choose a winner and transport the winner and a guest to have lunch with him at the Calgary Expo. In the first few months Renner teased behind-the-scenes of projects he was working on, which he now sporadically does on Instagram. The app was similarly designed to Instagram as well, with a near identically styled layout. Around midway through 2019, a hoax account of Renner was made to mock the celebrity, joking about masturbating to porn and defending another hoax account of Casey Anthony. FastCompany wrote extensively about Renner's app in April 2019, calling it "a surprising new kind of social media". The Ringer stated "Jeremy Renner's Jeremy Renner app is the Jeremy Renner of apps." === After deletion (2019–2020) === After the shutdown of the app, a comedy-based pseudo-app with modular endings was released, called "The Jeremy Renner App Experience", in which the player plays as Jeremy Renner on the day of the Jeremy Renner Official app's shutdown. The app details several different choices on how Renner handles the situation. A six-part podcast was also created to mock the app's deletion, called The Renner Files, featuring Carolyn Goldfarb and Sarah Ramos. == Controversies == === Marketing === One of the main controversies of Renner's app was its marketing. The app's developers, Escapex, specialized in and grew famous for making similar monetized apps for celebrities. The marketing campaign was based on direct contact with Renner, whose chances were increased with regular payments for "stars", although very few encounters seemed to happen with Renner himself. The multiple problems with the app led the CEO of Escapex, Sephi Shapira, to call the app a "freak situation", and added "Am I concerned about this? Not more than I'm concerned about 50 other things I'm dealing with as a startup company." Along with the marketing failures, the app was seen as misrepresenting itself as seemingly erotic with some advertisements featuring Renner suggestively staring at the camera, despite the actual app being initially considered safe for children. === Harassment === After its release in 2017, the app was met with waves of harassment and bullying by many users on the app, most frequently by using impersonation — referenced in Renner's apology/deletion notice. Some death threats were made across the app by fraud accounts pretending to be several controversial celebrities, including O. J. Simpson and Casey Anthony. As early as October 2017, there were claims of censorship, bullying, and "contest-rigging". In September 2019, comedian Stefan Heck publicized his discovery of the fact that replies through the app appeared as if they were sent by Renner himself in push notifications. After several users abused this feature, Renner asked Escapex to shut down the app.
Read more →
NRD Cyber Security

NRD Cyber Security is a Lithuanian company that provides cybersecurity solutions, consulting, and other services. The organization specializes in CSIRT and SOC creation, modernization and training. It has helped to establish national and sectorial CSIRTs around the world, including countries, such as Bangladesh, Egypt, Bhutan, Kosovo, Malawi and others. NRD Cyber Security was found in 2013 to provide quality cybersecurity services to nations and organizations. In 2018 it was included in The Deloitte Technology Fast 50 in Europe list. In 2024 it was awarded the #98 place in MSSP Alert Top 250 world's managed security service providers. The company is a member of various cybersecurity organizations, such as Forum of Incident Response and Security Teams (FIRST), The Global Forum on Cyber Expertise (GFCE), Unicrons Lt. It is a strategic partner of The Global Cyber Security Capacity Centre (GCSCC) at University of Oxford.
Read more →
JBoss Tools

JBoss Tools is a set of Eclipse plugins and features designed to help JBoss and JavaEE developers develop applications. It is an umbrella project for the JBoss developed plugins that will make it into JBoss Developer Studio. == Modules == JBoss Tools includes the following modules: Visual Page Editor (VPE). The visual editor contributed by Exadel supports visual editing of HTML and JSF (JSP and Facelets) pages. VPE also includes visual support for JSF component libraries including JBoss RichFaces. Seam Tools. Includes support for (for example) seam-gen, RichFaces VE integration, Seam related code completion and refactoring. Hibernate Tools. Supporting mapping files, annotations and JPA with reverse engineering, code completion, project wizards, refactoring, interactive HQL/JPA-QL/Criteria execution and more. In short a merger of Hibernate Tools and Exadel ORM features. JBoss AS Tools. Easy start, stop and debug of JBoss AS 4+ servers from within Eclipse. Also includes features for packaging and deployment of any type of Eclipse project. Drools IDE. Rules file editing, Rete View, working memory debugging/inspection and more. jBPM Tools. jBPM workflow editing, deployment, etc. JBossWS Tools. Inspecting, invoking, developing and functional/load/compliance testing of web services over HTTP, base tooling provided by soapUI with the addition of JBossWS specific features/support. JBoss ESB Tools. The structured xml editor for the jboss-esb.xml file used in JBoss ESB. Birt Tools. Hibernate and Seam extensions for Eclipse BIRT. Portal Tools. JBoss Tools supports the JSR-168 Portlet Specification (Portlet 1.0), JSR-286 Portlet Specification (Portlet 2.0) and works with PortletBridge for supporting Portlets in JSF/Seam applications. To enable these features, add the JBoss Portlet facet to a new or an existing web project. Core/General Tools. To reduce the UI clutter, most of the "configure project" menu items move into the Configure menu introduced in Eclipse 3.5 instead of always having a static JBoss Tools menu entry show up even in projects unrelated to JBoss Tools. Smooks Tools. The editor for Smooks configuration files. JBoss ESB Tools. The ESB project Wizard, which creates a project that can be deployed as an .esb archive to a JBoss AS-based server with JBoss ESB installed. JMX Tools. JMX Tools allows establishing multiple JMX connections and provides views for exploring the JMX tree and execute operations directly from Eclipse. The JMX Tools replaces the JMX node previously available in the JBoss Server View. JST/JSF Tools. RichFaces Support, Code Assists, Web XML/JSP/XHTML Editors, CSS Style Editing, web.xml validation, Faceleted taglib in taglib.xml is supported with XSD schema location. Project Examples. The experimental feature called Project Example wizard aims to allow users to download example projects from a remote site and have them working out-of-the-box. AS/Project Archives Tools. To deploy projects compressed, configurable in the server editor. If enabled, all projects deployed to that server will be compressed instead of in an exploded folder. Maven Tools. The optional integration with m2eclipse to provide Maven support for projects created by JBoss Tools and to some extent core WTP projects. BPEL Tools. A BPEL Editor based on the Eclipse BPEL project has been added to JBoss Tools. This means that users can create, edit and deploy BPEL artifacts for the Riftsaw BPEL Runtime. CDI (JSR-299) Tools. Support of the Contexts and Dependency Injection annotations; it works on any Eclipse Java project (via the Configure menu with CDI enabled).
Read more →
Scanimate

Scanimate is an analog computer animation (video synthesizer) system created by Lee Harrison III of Denver, Colorado. Harrison had developed its predecessor, ANIMAC, which generated used a motion capture system, based on a body suit with potentiometers. In contrast, Scanimate included TV technology. Scanimate's successor was called Caesar, and used a digital computer to control the analog system. The eight Scanimate systems were used to produce much of the video-based animation seen on television between most of the 1970s and early 1980s in commercials, promotions, and show openings. One of the major advantages the Scanimate system had over film-based animation and computer animation was the ability to create animations in real time. The speed with which animation could be produced on the system because of this, as well as its range of possible effects, helped it to supersede film-based animation techniques for television graphics. By the mid-1980s, it was superseded by digital computer animation, which produced sharper images and more sophisticated 3D imagery. Animations created on Scanimate and similar analog computer animation systems have a number of characteristic features that distinguish them from film-based animation: the motion is extremely fluid, using all 60 fields per second (in NTSC format video) or 50 fields (in PAL format video) rather than the 24 frames per second that film uses; the colors are much brighter and more saturated; and the images have a very "electronic" look that results from the direct manipulation of video signals through which the Scanimate produces the images. == How it works == A special high-resolution (around 945 lines) monochrome camera records high-contrast artwork. The image is then displayed on a high-resolution screen. Unlike a normal monitor, its deflection signals are passed through a special analog computer that enables the operator to bend the image in a variety of ways. The image is then shot from the screen by either a film camera or a video camera. In the case of a video camera, this signal is then fed into a colorizer, a device that takes certain shades of grey and turns it into color as well as transparency. The idea behind this is that the output of the Scanimate itself is always monochrome. Another advantage of the colorizer is that it gives the operator the ability to continuously add layers of graphics. This makes possible the creation of very complex graphics. This is done by using two video recorders. The background is played by one recorder and then recorded by another one. This process is repeated for every layer. This requires very high-quality video recorders (such as both the Ampex VR-2000 or IVC's IVC-9000 of Scanimate's era, the IVC-9000 being used quite frequently for Scanimate composition due to its very high generational quality between re-recordings). == Current usage == Two of the Scanimates are still in use at ZFx studios in Asheville, North Carolina. The original "Black Swan" R&D machine has been updated with more modern power supplies and can produce material in standard or 1080P high definition video. The "white Pearl" machine is the last one produced and is being kept in its original configuration for historical purposes by David Sieg at ZFx inc. The machines are installed in a working production environment with Grass Valley switchers, Kaleidoscope digital video effects systems, and Accom digital disk recorders for layering. == Use in television, music and films == === Music videos === Let's Groove by Earth, Wind & Fire Get Down on It by Kool & the Gang Blame It on the Boogie by The Jacksons Knock on Wood by Amii Stewart Popcorn Love by New Edition === TV programs/movies === === TV channels/home video/TV productions ===
Read more →
Lost Art-Database

The Lost Art-Datenbank is an online database published by the German Lost Art Foundation (Deutsches Zentrum Kulturgutverluste. It contains information on cultural objects looted from Jewish collectors or transferred due to Nazi persecution during the Nazi era. Until 2015, it was managed by the Koordinierungsstelle für Kulturgutverluste (Magdeburg Coordination Office). == Creation == Following the Washington Conference of 1998, and the commitments to provide more transparency regarding looted art, Germany launched the Lost Art Database in 2000 order to help Holocaust victims and their families track down artworks that had been looted from them or lost due to Nazi persecution. == Functionality == The Lost Art Database lists art and books and other cultural objects that were lost, seized, stolen or forceably sold during the Nazi era. The database is divided into search requests from victims' families, heirs or institutions and "found" reports from cultural institutions on items with unresolved provenance gaps from the Nazi periods. The section on reports of finds lists objects that are known to have been unlawfully seized or relocated as a result of the war. In addition, reports are published here on cultural objects for which an uncertain or incomplete provenance may indicate a possible unlawful seizure or war-related relocation. The publication of reports in the Lost Art Internet Database is carried out on behalf of and with the consent of the reporting persons and institutions. The responsibility for the content of the reports lies with these legal or natural persons. There have been controversies over which items should be included in the database. Lost Art is based on the Washington Principles adopted in 1998, which Germany has committed itself to implementing (Joint Declaration, 1999). The Lost Art Database is considered a key resource in the search for looted art and the victims of persecution. Every item in the Lost Art Database has an identifier, known as a Lost Art ID. Proveana is the linked research database. == Other lost art databases == Other countries have launched databases to help identify Nazi looted art. Each database has its own area of focus. The German Lost Art Database allows families or heirs to submit information. Other countries have databases that focus on looted artworks that have not been found or artworks that were repatriated to the national authorities after the defeat of the Nazis but were never returned to their original owners. Other databases have been created for stolen antiquities, looted art from colonial era, art stolen from Syria, Iraq, Ukraine, or from museums or collectors.
Read more →