In many Unix variants, "nobody" is the conventional name of a user identifier which owns no files, is in no privileged groups, and has no abilities except those which every other user has. It is normally not enabled as a user account, i.e. has no home directory or login credentials assigned. Some systems also define an equivalent group "nogroup". == Uses == The pseudo-user "nobody" and group "nogroup" are used, for example, in the NFSv4 implementation of Linux by idmapd, if a user or group name in an incoming packet does not match any known username on the system. It was once common to run daemons as nobody, especially on servers, in order to limit the damage that could be done by a malicious user who gained control of them. However, the usefulness of this technique is reduced if more than one daemon is run like this, because then gaining control of one daemon would provide control of them all. The reason is that processes owned by the same user have the ability to send signals to each other and use debugging facilities to read or even modify each other's memory. Modern practice, as recommended by the Linux Standard Base, is to create a separate user account for each daemon.
Learning to rank
Learning to rank (LTR) or machine-learned ranking (MLR) is the application of machine learning, often supervised, semi-supervised or reinforcement learning, in the construction of ranking models for information retrieval and recommender systems. Training data may, for example, consist of lists of items with some partial order specified between items in each list. This order is typically induced by giving a numerical or ordinal score or a binary judgment (e.g. "relevant" or "not relevant") for each item. The goal of constructing the ranking model is to rank new, unseen lists in a similar way to rankings in the training data. == Applications == === In information retrieval === Ranking is a central part of many information retrieval problems, such as document retrieval, collaborative filtering, sentiment analysis, and online advertising. A possible architecture of a machine-learned search engine is shown in the accompanying figure. Training data consists of queries and documents matching them together with the relevance degree of each match. It may be prepared manually by human assessors (or raters, as Google calls them), who check results for some queries and determine relevance of each result. It is not feasible to check the relevance of all documents, and so typically a technique called pooling is used — only the top few documents, retrieved by some existing ranking models are checked. This technique may introduce selection bias. Alternatively, training data may be derived automatically by analyzing clickthrough logs (i.e. search results which got clicks from users), query chains, or such search engines' features as Google's (since-replaced) SearchWiki. Clickthrough logs can be biased by the tendency of users to click on the top search results on the assumption that they are already well-ranked. Training data is used by a learning algorithm to produce a ranking model which computes the relevance of documents for actual queries. Typically, users expect a search query to complete in a short time (such as a few hundred milliseconds for web search), which makes it impossible to evaluate a complex ranking model on each document in the corpus, and so a two-phase scheme is used. First, a small number of potentially relevant documents are identified using simpler retrieval models which permit fast query evaluation, such as the vector space model, Boolean model, weighted AND, or BM25. This phase is called top- k {\displaystyle k} document retrieval and many heuristics were proposed in the literature to accelerate it, such as using a document's static quality score and tiered indexes. In the second phase, a more accurate but computationally expensive machine-learned model is used to re-rank these documents. === In other areas === Learning to rank algorithms have been applied in areas other than information retrieval: In machine translation for ranking a set of hypothesized translations; In computational biology for ranking candidate 3-D structures in protein structure prediction problems; In recommender systems for identifying a ranked list of related news articles to recommend to a user after he or she has read a current news article. == Feature vectors == For the convenience of MLR algorithms, query-document pairs are usually represented by numerical vectors, which are called feature vectors. Such an approach is sometimes called bag of features and is analogous to the bag of words model and vector space model used in information retrieval for representation of documents. Components of such vectors are called features, factors or ranking signals. They may be divided into three groups (features from document retrieval are shown as examples): Query-independent or static features — those features, which depend only on the document, but not on the query. For example, PageRank or document's length. Such features can be precomputed in off-line mode during indexing. They may be used to compute document's static quality score (or static rank), which is often used to speed up search query evaluation. Query-dependent or dynamic features — those features, which depend both on the contents of the document and the query, such as TF-IDF score or other non-machine-learned ranking functions. Query-level features or query features, which depend only on the query. For example, the number of words in a query. Some examples of features, which were used in the well-known LETOR dataset: TF, TF-IDF, BM25, and language modeling scores of document's zones (title, body, anchors text, URL) for a given query; Lengths and IDF sums of document's zones; Document's PageRank, HITS ranks and their variants. Selecting and designing good features is an important area in machine learning, which is called feature engineering. == Evaluation measures == There are several measures (metrics) which are commonly used to judge how well an algorithm is doing on training data and to compare the performance of different MLR algorithms. Often a learning-to-rank problem is reformulated as an optimization problem with respect to one of these metrics. Examples of ranking quality measures: Mean average precision (MAP); DCG and NDCG; Precision@n, NDCG@n, where "@n" denotes that the metrics are evaluated only on top n documents; Mean reciprocal rank; Kendall's tau; Spearman's rho. DCG and its normalized variant NDCG are usually preferred in academic research when multiple levels of relevance are used. Other metrics such as MAP, MRR and precision, are defined only for binary judgments. Recently, there have been proposed several new evaluation metrics which claim to model user's satisfaction with search results better than the DCG metric: Expected reciprocal rank (ERR); Yandex's pfound. Both of these metrics are based on the assumption that the user is more likely to stop looking at search results after examining a more relevant document, than after a less relevant document. == Approaches == Learning to Rank approaches are often categorized using one of three approaches: pointwise (where individual documents are ranked), pairwise (where pairs of documents are ranked into a relative order), and listwise (where an entire list of documents are ordered). Tie-Yan Liu of Microsoft Research Asia has analyzed existing algorithms for learning to rank problems in his book Learning to Rank for Information Retrieval. He categorized them into three groups by their input spaces, output spaces, hypothesis spaces (the core function of the model) and loss functions: the pointwise, pairwise, and listwise approach. In practice, listwise approaches often outperform pairwise approaches and pointwise approaches. This statement was further supported by a large scale experiment on the performance of different learning-to-rank methods on a large collection of benchmark data sets. In this section, without further notice, x {\displaystyle x} denotes an object to be evaluated, for example, a document or an image, f ( x ) {\displaystyle f(x)} denotes a single-value hypothesis, h ( ⋅ ) {\displaystyle h(\cdot )} denotes a bi-variate or multi-variate function and L ( ⋅ ) {\displaystyle L(\cdot )} denotes the loss function. === Pointwise approach === In this case, it is assumed that each query-document pair in the training data has a numerical or ordinal score. Then the learning-to-rank problem can be approximated by a regression problem — given a single query-document pair, predict its score. Formally speaking, the pointwise approach aims at learning a function f ( x ) {\displaystyle f(x)} predicting the real-value or ordinal score of a document x {\displaystyle x} using the loss function L ( f ; x j , y j ) {\displaystyle L(f;x_{j},y_{j})} . A number of existing supervised machine learning algorithms can be readily used for this purpose. Ordinal regression and classification algorithms can also be used in pointwise approach when they are used to predict the score of a single query-document pair, and it takes a small, finite number of values. === Pairwise approach === In this case, the learning-to-rank problem is approximated by a classification problem — learning a binary classifier h ( x u , x v ) {\displaystyle h(x_{u},x_{v})} that can tell which document is better in a given pair of documents. The classifier shall take two documents as its input and the goal is to minimize a loss function L ( h ; x u , x v , y u , v ) {\displaystyle L(h;x_{u},x_{v},y_{u,v})} . The loss function typically reflects the number and magnitude of inversions in the induced ranking. In many cases, the binary classifier h ( x u , x v ) {\displaystyle h(x_{u},x_{v})} is implemented with a scoring function f ( x ) {\displaystyle f(x)} . As an example, RankNet adapts a probability model and defines h ( x u , x v ) {\displaystyle h(x_{u},x_{v})} as the estimated probability of the document x u {\displaystyle x_{u}} has higher quality than x v {\displaystyle x_{v}} : P u , v ( f ) = CDF ( f ( x u ) − f ( x v ) ) , {\displaystyle P_{u,v}(f)={\text{CDF}
Mutation (evolutionary algorithm)
Mutation is a genetic operator used to maintain genetic diversity of the chromosomes of a population of an evolutionary algorithm (EA), including genetic algorithms in particular. It is analogous to biological mutation. The classic example of a mutation operator of a binary coded genetic algorithm (GA) involves a probability that an arbitrary bit in a genetic sequence will be flipped from its original state. A common method of implementing the mutation operator involves generating a random variable for each bit in a sequence. This random variable tells whether or not a particular bit will be flipped. This mutation procedure, based on the biological point mutation, is called single point mutation. Other types of mutation operators are commonly used for representations other than binary, such as floating-point encodings or representations for combinatorial problems. The purpose of mutation in EAs is to introduce diversity into the sampled population. Mutation operators are used in an attempt to avoid local minima by preventing the population of chromosomes from becoming too similar to each other, thus slowing or even stopping convergence to the global optimum. This reasoning also leads most EAs to avoid only taking the fittest of the population in generating the next generation, but rather selecting a random (or semi-random) set with a weighting toward those that are fitter. The following requirements apply to all mutation operators used in an EA: every point in the search space must be reachable by one or more mutations. there must be no preference for parts or directions in the search space (no drift). small mutations should be more probable than large ones. For different genome types, different mutation types are suitable. Some mutations are Gaussian, Uniform, Zigzag, Scramble, Insertion, Inversion, Swap, and so on. An overview and more operators than those presented below can be found in the introductory book by Eiben and Smith or in. == Bit string mutation == The mutation of bit strings ensue through bit flips at random positions. Example: The probability of a mutation of a bit is 1 l {\displaystyle {\frac {1}{l}}} , where l {\displaystyle l} is the length of the binary vector. Thus, a mutation rate of 1 {\displaystyle 1} per mutation and individual selected for mutation is reached. == Mutation of real numbers == Many EAs, such as the evolution strategy or the real-coded genetic algorithms, work with real numbers instead of bit strings. This is due to the good experiences that have been made with this type of coding. The value of a real-valued gene can either be changed or redetermined. A mutation that implements the latter should only ever be used in conjunction with the value-changing mutations and then only with comparatively low probability, as it can lead to large changes. In practical applications, the respective value range of the decision variables to be changed of the optimisation problem to be solved is usually limited. Accordingly, the values of the associated genes are each restricted to an interval [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} . Mutations may or may not take these restrictions into account. In the latter case, suitable post-treatment is then required as described below. === Mutation without consideration of restrictions === A real number x {\displaystyle x} can be mutated using normal distribution N ( 0 , σ ) {\displaystyle {\mathcal {N}}(0,\sigma )} by adding the generated random value to the old value of the gene, resulting in the mutated value x ′ {\displaystyle x'} : x ′ = x + N ( 0 , σ ) {\displaystyle x'=x+{\mathcal {N}}(0,\sigma )} In the case of genes with a restricted range of values, it is a good idea to choose the step size of the mutation σ {\displaystyle \sigma } so that it reasonably fits the range [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} of the gene to be changed, e.g.: σ = x max − x min 6 {\displaystyle \sigma ={\frac {x_{\text{max}}-x_{\text{min}}}{6}}} The step size can also be adjusted to the smaller permissible change range depending on the current value. In any case, however, it is likely that the new value x ′ {\displaystyle x'} of the gene will be outside the permissible range of values. Such a case must be considered a lethal mutation, since the obvious repair by using the respective violated limit as the new value of the gene would lead to a drift. This is because the limit value would then be selected with the entire probability of the values beyond the limit of the value range. The evolution strategy works with real numbers and mutation based on normal distribution. The step sizes are part of the chromosome and are subject to evolution together with the actual decision variables. === Mutation with consideration of restrictions === One possible form of changing the value of a gene while taking its value range [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} into account is the mutation relative parameter change of the evolutionary algorithm GLEAM (General Learning Evolutionary Algorithm and Method), in which, as with the mutation presented earlier, small changes are more likely than large ones. First, an equally distributed decision is made as to whether the current value x {\displaystyle x} should be increased or decreased and then the corresponding total change interval is determined. Without loss of generality, an increase is assumed for the explanation and the total change interval is then [ x , x max ] {\displaystyle [x,x_{\max }]} . It is divided into k {\displaystyle k} sub-areas of equal size with the width δ {\displaystyle \delta } , from which k {\displaystyle k} sub-change intervals of different size are formed: i {\displaystyle i} -th sub-change interval: [ x , x + δ ⋅ i ] {\displaystyle [x,x+\delta \cdot i]} with δ = ( x max − x ) k {\displaystyle \delta ={\frac {(x_{\text{max}}-x)}{k}}} and i = 1 , … , k {\displaystyle i=1,\dots ,k} Subsequently, one of the k {\displaystyle k} sub-change intervals is selected in equal distribution and a random number, also equally distributed, is drawn from it as the new value x ′ {\displaystyle x'} of the gene. The resulting summed probabilities of the sub-change intervals result in the probability distribution of the k {\displaystyle k} sub-areas shown in the adjacent figure for the exemplary case of k = 10 {\displaystyle k=10} . This is not a normal distribution as before, but this distribution also clearly favours small changes over larger ones. This mutation for larger values of k {\displaystyle k} , such as 10, is less well suited for tasks where the optimum lies on one of the value range boundaries. This can be remedied by significantly reducing k {\displaystyle k} when a gene value approaches its limits very closely. === Common properties === For both mutation operators for real-valued numbers, the probability of an increase and decrease is independent of the current value and is 50% in each case. In addition, small changes are considerably more likely than large ones. For mixed-integer optimization problems, rounding is usually used. == Mutation of permutations == Mutations of permutations are specially designed for genomes that are themselves permutations of a set. These are often used to solve combinatorial tasks. In the two mutations presented, parts of the genome are rotated or inverted. === Rotation to the right === The presentation of the procedure is illustrated by an example on the right: === Inversion === The presentation of the procedure is illustrated by an example on the right: === Variants with preference for smaller changes === The requirement raised at the beginning for mutations, according to which small changes should be more probable than large ones, is only inadequately fulfilled by the two permutation mutations presented, since the lengths of the partial lists and the number of shift positions are determined in an equally distributed manner. However, the longer the partial list and the shift, the greater the change in gene order. This can be remedied by the following modifications. The end index j {\displaystyle j} of the partial lists is determined as the distance d {\displaystyle d} to the start index i {\displaystyle i} : j = ( i + d ) mod | P 0 | {\displaystyle j=(i+d){\bmod {\left|P_{0}\right|}}} where d {\displaystyle d} is determined randomly according to one of the two procedures for the mutation of real numbers from the interval [ 0 , | P 0 | − 1 ] {\displaystyle \left[0,\left|P_{0}\right|-1\right]} and rounded. For the rotation, k {\displaystyle k} is determined similarly to the distance d {\displaystyle d} , but the value 0 {\displaystyle 0} is forbidden. For the inversion, note that i ≠ j {\displaystyle i\neq j} must hold, so for d {\displaystyle d} the value 0 {\displaystyle 0} must be excluded.
Genotypic and phenotypic repair
Genotypic and phenotypic repair are optional components of an evolutionary algorithm (EA). An EA reproduces essential elements of biological evolution as a computer algorithm in order to solve demanding optimization or planning tasks, at least approximately. A candidate solution is represented by a - usually linear - data structure that plays the role of an individual's chromosome. New solution candidates are generated by mutation and crossover operators following the example of biology. These offspring may be defective, which is corrected or compensated for by genotypic or phenotypic repair. == Description == Genotypic repair, also known as genetic repair, is the removal or correction of impermissible entries in the chromosome that violate restrictions. In phenotypic repair, the corrections are only made in the genotype-phenotype mapping and the chromosome remains unchanged. Michalewicz wrote about the importance of restrictions in real-world applications: "In general, constraints are an integral part of the formulation of any problem". Restriction violations are application-specific and therefore it depends on the current problem whether and which type of repair is useful. They can usually also be treated by a correspondingly extended evaluation and it depends on the problem which measures are possible and which is the most suitable. If a phenotypic repair is feasible, then it is usually the most efficient compared to the other measures. A survey on repair methods used as constraint handling techniques can be found in. Violations of the range limits of genes should be avoided as far as possible by the formulation of the genome. If this is not possible or if restrictions within the search space defined by the genome are involved, their violations are usually handled by the evaluation. This can be done, for example, by penalty functions that lower the fitness. Repair is often also required for combinatorial tasks. The application of a 1- or n-point crossover operator can, for example, lead to genes being missing in one of the child genomes that are present in duplicate in the other. In this case, a suitable genotypic repair measure is to move the surplus genes to the other genome in a positional manner. The use of the aforementioned operators in combinatorial tasks has also proven to be useful in combination with crossover types specially developed for permutations, at least for certain problems. Particularly in combinatorial problems, it has been observed that genotypic repair can promote premature convergence to a suboptimum, but can also significantly accelerate a successful search. Studies on various tasks have shown that this is application-dependent. An effective measure to avoid premature convergence is generally the use of structured populations instead of the usual panmictic ones. Sequence restrictions play a role in many scheduling tasks, for example when it comes to planning workflows. If, for example, it is specified that step A must be carried out before step B and the gene of step B is located before the gene of A in the chromosome, then there is an impermissible gene sequence. This is because the scheduling operation of step B requires the planned end of step A for correct scheduling, but this is not yet scheduled at the time gene B is processed. The problem can be solved in two ways: The scheduling operation of step B is postponed until the gene from step A has been processed. The genome remains unchanged and the repair only influences the genotype-phenotype mapping. Since only the phenotype is changed, this is referred to as phenotypic repair. If, on the other hand, the gene of step B is moved behind the gene of step A, this is a genotypic repair. The same applies to the alternative shift of gene A in front of gene B. In this case, genotypic repair has the disadvantage that it prevents a meaningful restructuring of the gene sequence in the chromosome if this requires several intermediate steps (mutations) that at least partially violate restrictions.
Tensor product network
A tensor product network, in artificial neural networks, is a network that exploits the properties of tensors to model associative concepts such as variable assignment. Orthonormal vectors are chosen to model the ideas (such as variable names and target assignments), and the tensor product of these vectors construct a network whose mathematical properties allow the user to easily extract the association from it.
Integrated test facility
An integrated test facility (ITF) creates a fictitious entity in a database to process test transactions simultaneously with live input. ITF can be used to incorporate test transactions into a normal production run of a system. Its advantage is that periodic testing does not require separate test processes. However, careful planning is necessary, and test data must be isolated from production data. Moreover, ITF validates the correct operation of a transaction in an application, but it does not ensure that a system is being operated correctly. Integrated test facility is considered a useful audit tool during an IT audit because it uses the same programs to compare processing using independently calculated data. This involves setting up dummy entities on an application system and processing test or production data against the entity as a means of verifying processing accuracy.
Chromosome (evolutionary algorithm)
A chromosome or genotype in evolutionary algorithms (EA) is a set of parameters which define a proposed solution of the problem that the evolutionary algorithm is trying to solve. The set of all solutions, also called individuals according to the biological model, is known as the population. The genome of an individual consists of one, more rarely of several, chromosomes and corresponds to the genetic representation of the task to be solved. A chromosome is composed of a set of genes, where a gene consists of one or more semantically connected parameters, which are often also called decision variables. They determine one or more phenotypic characteristics of the individual or at least have an influence on them. In the basic form of genetic algorithms, the chromosome is represented as a binary string, while in later variants and in EAs in general, a wide variety of other data structures are used. == Chromosome design == When creating the genetic representation of a task, it is determined which decision variables and other degrees of freedom of the task should be improved by the EA and possible additional heuristics and how the genotype-phenotype mapping should look like. The design of a chromosome translates these considerations into concrete data structures for which an EA then has to be selected, configured, extended, or, in the worst case, created. Finding a suitable representation of the problem domain for a chromosome is an important consideration, as a good representation will make the search easier by limiting the search space; similarly, a poorer representation will allow a larger search space. In this context, suitable mutation and crossover operators must also be found or newly defined to fit the chosen chromosome design. An important requirement for these operators is that they not only allow all points in the search space to be reached in principle, but also make this as easy as possible. The following requirements must be met by a well-suited chromosome: It must allow the accessibility of all admissible points in the search space. Design of the chromosome in such a way that it covers only the search space and no additional areas. so that there is no redundancy or only as little redundancy as possible. Observance of strong causality: small changes in the chromosome should only lead to small changes in the phenotype. This is also called locality of the relationship between search and problem space. Designing the chromosome in such a way that it excludes prohibited regions in the search space completely or as much as possible. While the first requirement is indispensable, depending on the application and the EA used, one usually only has to be satisfied with fulfilling the remaining requirements as far as possible. The evolutionary search is supported and possibly considerably accelerated by a fulfillment as complete as possible. == Examples of chromosomes == === Chromosomes for binary codings === In their classical form, GAs use bit strings and map the decision variables to be optimized onto them. An example for one Boolean and three integer decision variables with the value ranges 0 ≤ D 1 ≤ 60 {\displaystyle 0\leq D_{1}\leq 60} , 28 ≤ D 2 ≤ 30 {\displaystyle 28\leq D_{2}\leq 30} and − 12 ≤ D 3 ≤ 14 {\displaystyle -12\leq D_{3}\leq 14} may illustrate this: Note that the negative number here is given in two's complement. This straight forward representation uses five bits to represent the three values of D 2 {\displaystyle D_{2}} , although two bits would suffice. This is a significant redundancy. An improved alternative, where 28 is to be added for the genotype-phenotype mapping, could look like this: with D 2 = 28 + D 2 ′ = 29 {\displaystyle D_{2}=28+D'_{2}=29} . === Chromosomes with real-valued or integer genes === For the processing of tasks with real-valued or mixed-integer decision variables, EAs such as the evolution strategy or the real-coded GAs are suited. In the case of mixed-integer values, rounding is often used, but this represents some violation of the redundancy requirement. If the necessary precisions of the real values can be reasonably narrowed down, this violation can be remedied by using integer-coded GAs. For this purpose, the valid digits of real values are mapped to integers by multiplication with a suitable factor. For example, 12.380 becomes the integer 12380 by multiplying by 1000. This must of course be taken into account in genotype-phenotype mapping for evaluation and result presentation. A common form is a chromosome consisting of a list or an array of integer or real values. === Chromosomes for permutations === Combinatorial problems are mainly concerned with finding an optimal sequence of a set of elementary items. As an example, consider the problem of the traveling salesman who wants to visit a given number of cities exactly once on the shortest possible tour. The simplest and most obvious mapping onto a chromosome is to number the cities consecutively, to interpret a resulting sequence as permutation and to store it directly in a chromosome, where one gene corresponds to the ordinal number of a city. Then, however, the variation operators may only change the gene order and not remove or duplicate any genes. The chromosome thus contains the path of a possible tour to the cities. As an example the sequence 3 , 5 , 7 , 1 , 4 , 2 , 9 , 6 , 8 {\displaystyle 3,5,7,1,4,2,9,6,8} of nine cities may serve, to which the following chromosome corresponds: In addition to this encoding frequently called path representation, there are several other ways of representing a permutation, for example the ordinal representation or the matrix representation. === Chromosomes for co-evolution === When a genetic representation contains, in addition to the decision variables, additional information that influences evolution and/or the mapping of the genotype to the phenotype and is itself subject to evolution, this is referred to as co-evolution. A typical example is the evolution strategy (ES), which includes one or more mutation step sizes as strategy parameters in each chromosome. Another example is an additional gene to control a selection heuristic for resource allocation in a scheduling tasks. This approach is based on the assumption that good solutions are based on an appropriate selection of strategy parameters or on control gene(s) that influences genotype-phenotype mapping. The success of the ES gives evidence to this assumption. === Chromosomes for complex representations === The chromosomes presented above are well suited for processing tasks of continuous, mixed-integer, pure-integer or combinatorial optimization. For a combination of these optimization areas, on the other hand, it becomes increasingly difficult to map them to simple strings of values, depending on the task. The following extension of the gene concept is proposed by the EA GLEAM (General Learning Evolutionary Algorithm and Method) for this purpose: A gene is considered to be the description of an element or elementary trait of the phenotype, which may have multiple parameters. For this purpose, gene types are defined that contain as many parameters of the appropriate data type as are required to describe the particular element of the phenotype. A chromosome now consists of genes as data objects of the gene types, whereby, depending on the application, each gene type occurs exactly once as a gene or can be contained in the chromosome any number of times. The latter leads to chromosomes of dynamic length, as they are required for some problems. The gene type definitions also contain information on the permissible value ranges of the gene parameters, which are observed during chromosome generation and by corresponding mutations, so they cannot lead to lethal mutations. For tasks with a combinatorial part, there are suitable genetic operators that can move or reposition genes as a whole, i.e. with their parameters. A scheduling task is used as an illustration, in which workflows are to be scheduled that require different numbers of heterogeneous resources. A workflow specifies which work steps can be processed in parallel and which have to be executed one after the other. In this context, heterogeneous resources mean different processing times at different costs in addition to different processing capabilities. Each scheduling operation therefore requires one or more parameters that determine the resource selection, where the value ranges of the parameters depend on the number of alternative resources available for each work step. A suitable chromosome provides one gene type per work step and in this case one corresponding gene, which has one parameter for each required resource. The order of genes determines the order of scheduling operations and, therefore, the precedence in case of allocation conflicts. The exemplary gene type definition of work step 15 with two resources, for which there are four and seven alternatives respectively