AI Assistant Quotes

AI Assistant Quotes — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Two-phase locking

  In databases and transaction processing, two-phase locking (2PL) is a pessimistic concurrency control method that guarantees conflict-serializability. It is also the name of the resulting set of database transaction schedules (histories). The protocol uses locks, applied by a transaction to data, which may block (interpreted as signals to stop) other transactions from accessing the same data during the transaction's life. By the 2PL protocol, locks are applied and removed in two phases: Expanding phase: locks are acquired and no locks are released. Shrinking phase: locks are released and no locks are acquired. Two types of locks are used by the basic protocol: Shared and Exclusive locks. Refinements of the basic protocol may use more lock types. Using locks that block processes, 2PL, S2PL, and SS2PL may be subject to deadlocks that result from the mutual blocking of two or more transactions. == Read and write locks == Locks are used to guarantee serializability. A transaction is holding a lock on an object if that transaction has acquired a lock on that object which has not yet been released. For 2PL, the only used data-access locks are read-locks (shared locks) and write-locks (exclusive locks). Below are the rules for read-locks and write-locks: A transaction is allowed to read an object if and only if it is holding a read-lock or write-lock on that object. A transaction is allowed to write an object if and only if it is holding a write-lock on that object. A schedule (i.e., a set of transactions) is allowed to hold multiple locks on the same object simultaneously if and only if none of those locks are write-locks. If a disallowed lock attempts on being held simultaneously, it will be blocked. == Variants == Note that all conflict serializable schedules are also view serializable (but not vice-versa). === Two-phase locking === According to the two-phase locking protocol, each transaction handles its locks in two distinct, consecutive phases during the transaction's execution: Expanding phase (aka Growing phase): locks are acquired and no locks are released (the number of locks can only increase). Shrinking phase (aka Contracting phase): locks are released and no locks are acquired. The two phase locking rules can be summarized as: each transaction must never acquire a lock after it has released a lock. The serializability property is guaranteed for a schedule with transactions that obey this rule. Typically, without explicit knowledge in a transaction on end of phase 1, the rule is safely determined only when a transaction has completed processing and requested commit. In this case, all the locks can be released at once (phase 2). === Conservative two-phase locking === Conservative two-phase locking (C2PL) differs from 2PL in that transactions obtain all the locks they need before the actual execution begins. This is to ensure that a transaction that already holds some locks will not block waiting for other locks. C2PL prevents deadlocks. In cases of heavy lock contention, C2PL reduces the time locks are held on average, relative to 2PL and Strict 2PL, because transactions that hold locks are never blocked. In light lock contention, C2PL holds more locks than is necessary, because it is difficult to predict which locks will be needed in the future, thus leading to higher overhead. A C2PL transaction will not obtain any locks if it cannot obtain all the locks it needs in its initial request. Furthermore, each transaction needs to declare its read and write set (the data items that will be read/written), which is not always possible. Because of these limitations, C2PL is not used very frequently. === Strict two-phase locking === To comply with the strict two-phase locking (S2PL) protocol, a transaction needs to comply with 2PL, and release its write (exclusive) locks only after the transaction has ended (i.e., either committed or aborted). On the other hand, read (shared) locks are released regularly during the shrinking phase. Unlike 2PL, S2PL provides strictness (a special case of cascade-less recoverability). This protocol is not appropriate in B-trees because it causes Bottleneck (while B-trees always starts searching from the parent root). === Strong strict two-phase locking === or Rigorousness, or Rigorous scheduling, or Rigorous two-phase locking To comply with strong strict two-phase locking (SS2PL), a transaction's read and write locks are released only after that transaction has ended (i.e., either committed or aborted). A transaction obeying SS2PL has only a phase 1 and lacks a phase 2 until the transaction has completed. Every SS2PL schedule is also an S2PL schedule, but not vice versa.

  Read more →
• 

  Contract management software

  Contract management software constitutes software and associated data management used to support contract management, contract lifecycle management, and contractor management on projects in the procurement of goods and services. It may be used together with project management software. == History == Historically, contract management was seen as a "paper-intensive" process. Early steps from the early 2000's reported by the Aberdeen Group required extensive data conversion work to enable documents to be handled electronically. With the adoption of the European Union's General Data Protection Regulation (GDPR) in 2016, companies needed to take additional steps in regards to contract management. Each data responsible entity was obliged to sign data processing agreements (DPAs) with the various vendors, who treat personal data on behalf of the data responsible. DPAs need to be regularly controlled, adjusted and renewed, which adds an extra agreement to such vendors or at least an extra DPA addendum to each agreement. By 2018, Ardent Partner's research had found that software used for automating contract management activities was being more extensively used among major companies or businesses with "Best-in-Class" procurement teams. Contract management process automation was found to be closely linked with more effective internal business collaboration, standardization and risk management. == Advantages and key functions == Using contract management software can have multiple benefits compared to manually managing paper contracts. This software can help keep track of multiple activities and can have features for automating administration, ensuring compliance, monitoring risk, running reports and triggering alerts. In addition to these types of features, contract management software systems provide a centralized repository for employees to quickly access all contracts worldwide in one place. Contract management software is produced by many companies, working on a range of scales and offering varying degrees of customizability. Basic functions should include the ability to store contract documents, track changes to contract documents, search documents for a particular criterion, send key date alerts and to report required aspects of the contract. Other functions include managing a new contract request, capturing related data, following a document through a review and approval process, and collecting digital signatures. Contract management software may also be an aid to project portfolio management and spend analysis, and may also monitor KPIs. Leading contract management software provides contract visibility, monitoring, and compliance to automate and streamline the contract lifecycle process. Contract management software which uses artificial intelligence (AI) can identify contract types based on pattern recognition. AI contracting software trains its algorithms on a set of contract data to recognize patterns and extract variables such as clauses, dates, and parties. It also offers simple prediction capabilities, by sorting through a large volume of contracts and flagging individual contracts based on specified criteria. AI software can also read contracts in multiple formats and languages, extract contract data, and provide analytics. It can reduce the risk of human error in contract drafting and review. A centralized repository provides a critical advantage allowing for all contract documents to be stored within one location. Having contracts stored in multiple locations can delay and interrupt the contracting process. == Contract risk management software (CRMS) for capital projects == Very large enterprises, such as capital expenditure (capex) projects, involve multiple parties and high risk and uncertainty. They are unlike traditional operating contracts in that they are subject to shared deadlines in unique situations. As the complexity of these unique projects increases, the relationships between parties become more important. This requires contract management software, or contract risk management software (CRMS), to become more dynamic and responsive. The terms of these capex contracts necessarily involve assumptions at the start of the process and are likely to change over the lifetime of the project lifecycle. For this reason, CRMS must be capable of recording one single instance of agreed changes to contract terms and incorporating these changes in an auditable and legally robust way. With multiple decision makers involved, CRMS should also make accountability more transparent and enable faster decisions about variation proposals.

  Read more →
• 

  SGT STAR

  SGT STAR, also known as Sgt. Star or Sergeant Star, was a chatbot operated by the United States Army to answer questions about recruitment. == Background == After the September 11 attacks, traffic increased significantly to chatrooms on the U.S. Army's website, goarmy.com, increasing costs of staffing the live chatrooms. As a cost-cutting measure, the SGT STAR project was initiated as a partnership between the United States Army Accessions Command and Spectre AI, a wholly owned subsidiary of Next IT. Next IT, a Spokane, Washington-based company deploys "intelligent virtual assistants," using its software dubbed "ActiveAgent" which is a framework for functional presence engines. Testing began in 2003, and SGT STAR launched to the public in 2006. "STAR" is an acronym for "strong, trained and ready." SGT STAR was launched as a chat interface on goarmy.com, but has since been developed as a mobile application, as well as a life-size animated projection that has appeared live at public events. SGT STAR can also interact with users on Facebook. == FOIA request == In 2013, the Electronic Frontier Foundation filed a Freedom of Information Act request to learn more about SGT STAR, including input and output patterns (questions and answers), usage statistics, contracts, and privacy policies. They received these records in April 2014, after coverage from various media outlets and a tongue-in-cheek campaign to "Free Sgt. Star."

  Read more →
• 

  PropBank

  PropBank is a corpus that is annotated with verbal propositions and their arguments—a "proposition bank". Although "PropBank" refers to a specific corpus produced by Martha Palmer et al., the term propbank is also coming to be used as a common noun referring to any corpus that has been annotated with propositions and their arguments. The PropBank project has played a role in research in natural language processing, and has been used in semantic role labelling. == Comparison == PropBank differs from FrameNet, the resource to which it is most frequently compared, in several ways. PropBank is a verb-oriented resource, while FrameNet is centered on the more abstract notion of frames, which generalizes descriptions across similar verbs (e.g. "describe" and "characterize") as well as nouns and other words (e.g. "description"). PropBank does not annotate events or states of affairs described using nouns. PropBank commits to annotating all verbs in a corpus, whereas the FrameNet project chooses sets of example sentences from a large corpus and only in a few cases has annotated longer continuous stretches of text. PropBank-style annotations often remain close to the syntactic level, while FrameNet-style annotations are sometimes more semantically motivated. From the start, PropBank was developed with the idea of serving as training data for machine learning-based semantic role labeling systems in mind. It requires that all arguments to a verb be syntactic constituents and different senses of a word are only distinguished if the differences bear on the arguments. Due to such differences, semantic role labeling with respect to PropBank is often a somewhat easier task than producing FrameNet-style annotations.

  Read more →
• 

  Kuki AI

  Kuki is an embodied AI bot designed for usage in the metaverse. Formerly known as Mitsuku, Kuki is a chatbot created from the Pandorabots framework. The bot has won the Loebner Prize 5 times. == Features == Kuki claims to be an 18-year-old female chatbot from the Metaverse, and the developers have stated she has been worked on since 2005. Early work by one of the company's co-founders inspired the Spike Jonze movie Her. As of 2015, she conversed, on average, in excess of a quarter of a million times daily, and it was estimated 5 million unique users had interacted with her between 2016 and 2020. == Virtual talent, model, and influencer == Kuki has appeared as a Virtual Model in Vogue Business and at Crypto Fashion Week where she modelled NFTs and spoke about the future of digital fashion. In 2021, Kuki modelled five digital looks from emerging Vogue Talents designers for Italian Vogue, that sold out as NFTs in under an hour. Kuki has also modeled for H&M on Instagram in a digital campaign that resulted in an "11x increase in ad recall" per a case study by Meta. == Awards == As of 2019, Kuki had been awarded the Loebner Prize five times, more than any other entrant. In 2020, Kuki competed against Facebook AI's Blenderbot in a 24/7 verbal sparring match called "Bot Battle", winning 79% of the audience vote.

  Read more →
• 

  Knowledge assessment methodology

  The knowledge assessment methodology (KAM) is "an interactive benchmarking tool created by the World Bank's Knowledge for Development Program to help countries identify the challenges and opportunities they face in making the transition to the knowledge-based economy." KAM does so by providing information on knowledge economy indicators for 146 countries. Its products include the Knowledge Economy Index and the Knowledge Index.

  Read more →
• 

  Transderivational search

  Transderivational search (often abbreviated to TDS) is a psychological and cybernetics term, meaning when a search is being conducted for a fuzzy match across a broad field. In computing the equivalent function can be performed using content-addressable memory. Unlike usual searches, which look for literal (i.e. exact, logical, or regular expression) matches, a transderivational search is a search for a possible meaning or possible match as part of communication, and without which an incoming communication cannot be made any sense of whatsoever. It is thus an integral part of processing language, and of attaching meaning to communication. In NLP (Neuro-linguistic programming), a transderivational search (Bandler and Grinder, 1976) is essentially the process of searching back through one's stored memories and mental representations to find the personal reference experiences from which a current understanding or mental map has been derived. By the end of 1976, Grinder and Bandler had combined Satir’s and Perls’ language patterns and Erickson’s hypnotic language and use of metaphor with anchoring to create new processes that they called collapsing anchors, trans-derivational search, changing personal history, and reframing. A psychological example of TDS is in Ericksonian hypnotherapy, where vague suggestions are used that the patient must process intensely in order to find their own meanings, thus ensuring that the practitioner does not intrude his own beliefs into the subject's inner world. == TDS in human communication and processing == Because TDS is a compelling, automatic and unconscious state of internal focus and processing (i.e. a type of everyday trance state), and often a state of internal lack of certainty, or openness to finding an answer (since something is being checked out at that moment), it can be utilized or interrupted, in order to create, or deepen, trance. TDS is a fundamental part of human language and cognitive processing. Arguably, every word or utterance a person hears, for example, and everything they see or feel and take note of, results in a very brief trance while TDS is carried out to establish a contextual meaning for it. === Examples === Leading statements: "And those thoughts you had yesterday..." the human mind cannot process hearing this phrase, without at some level searching internally for some thoughts or other that it had yesterday, to make the subject of the sentence. "The many colors that fruit can be" likewise starts the human mind considering even if briefly, different fruit sorted by color. "You did it again, didn't you!" This everyday manipulative use of TDS usually sends the recipient looking internally for some "it" they may have done for which blame is being fairly given. Regardless of whether such a matter can be identified, guilt or anger may result. "There has been pain, hasn't there" the mind of a patient suffering an illness will find it very hard or impossible to hear or answer this sentence without conducting internal searches to verify whether this is true or not, or to find an example if so. "You'd forgotten something [or: some part of your body], hadn't you?" the mind usually checks through the various things, or parts of the body, on hearing this, seeing if each in turn has been forgotten. Textual ambiguity: "Do you remember line dancing on the steps?" Without sufficient context, some statements may trigger TDS in order to resolve inherent ambiguity in the interpretation of a posed question. Do I remember a bygone fad called "line dancing on the steps"? Do I remember personally engaging in dancing in the past? Do I remember my routine practice dancing by focusing on the steps of the dance? Do I tend to forget about dancing when I am standing on steps? "Penny-wise and pound the table dance to the beat of a different drummer". The mixing of cliché and stock phrases may trigger TDS in order to reconcile the discrepancies between expected and actual utterances in sequence. Although TDS is often associated with spoken language, it can be induced in any perceptual system. Thus Milton Erickson's "hypnotic handshake" is a technique that leaves the other person performing TDS in search of meaning to a deliberately ambiguous use of touch.

  Read more →
• 

  Natural language understanding

  Natural language understanding (NLU) or natural language interpretation (NLI) is a subset of natural language processing in artificial intelligence that deals with machine reading comprehension. NLU has been considered an AI-hard problem. There is considerable commercial interest in the field because of its application to automated reasoning, machine translation, question answering, news-gathering, text categorization, voice-activation, archiving, and large-scale content analysis. == History == The program STUDENT, written in 1964 by Daniel Bobrow for his PhD dissertation at MIT, is one of the earliest known attempts at NLU by a computer. Eight years after John McCarthy coined the term artificial intelligence, Bobrow's dissertation (titled Natural Language Input for a Computer Problem Solving System) showed how a computer could understand simple natural language input to solve algebra word problems. A year later, in 1965, Joseph Weizenbaum at MIT wrote ELIZA, an interactive program that carried on a dialogue in English on any topic, the most popular being psychotherapy. ELIZA worked by simple parsing and substitution of key words into canned phrases and Weizenbaum sidestepped the problem of giving the program a database of real-world knowledge or a rich lexicon. Yet ELIZA gained surprising popularity as a toy project and can be seen as a very early precursor to current commercial systems such as those used by Ask.com. In 1969, Roger Schank at Stanford University introduced the conceptual dependency theory for NLU. This model, partially influenced by the work of Sydney Lamb, was extensively used by Schank's students at Yale University, such as Robert Wilensky, Wendy Lehnert, and Janet Kolodner. In 1970, William A. Woods introduced the augmented transition network (ATN) to represent natural language input. Instead of phrase structure rules ATNs used an equivalent set of finite-state automata that were called recursively. ATNs and their more general format called "generalized ATNs" continued to be used for a number of years. In 1971, Terry Winograd finished writing SHRDLU for his PhD thesis at MIT. SHRDLU could understand simple English sentences in a restricted world of children's blocks to direct a robotic arm to move items. The successful demonstration of SHRDLU provided significant momentum for continued research in the field. Winograd continued to be a major influence in the field with the publication of his book Language as a Cognitive Process. At Stanford, Winograd would later advise Larry Page, who co-founded Google. In the 1970s and 1980s, the natural language processing group at SRI International continued research and development in the field. A number of commercial efforts based on the research were undertaken, e.g., in 1982 Gary Hendrix formed Symantec Corporation originally as a company for developing a natural language interface for database queries on personal computers. However, with the advent of mouse-driven graphical user interfaces, Symantec changed direction. A number of other commercial efforts were started around the same time, e.g., Larry R. Harris at the Artificial Intelligence Corporation and Roger Schank and his students at Cognitive Systems Corp. In 1983, Michael Dyer developed the BORIS system at Yale which bore similarities to the work of Roger Schank and W. G. Lehnert. The third millennium saw the introduction of systems using machine learning for text classification, such as the IBM Watson. However, experts debate how much "understanding" such systems demonstrate: e.g., according to John Searle, Watson did not even understand the questions. John Ball, cognitive scientist and inventor of the Patom Theory, supports this assessment. Natural language processing has made inroads for applications to support human productivity in service and e-commerce, but this has largely been made possible by narrowing the scope of the application. There are thousands of ways to request something in a human language that still defies conventional natural language processing. According to Wibe Wagemans, "To have a meaningful conversation with machines is only possible when we match every word to the correct meaning based on the meanings of the other words in the sentence – just like a 3-year-old does without guesswork." == Scope and context == The umbrella term "natural language understanding" can be applied to a diverse set of computer applications, ranging from small, relatively simple tasks such as short commands issued to robots, to highly complex endeavors such as the full comprehension of newspaper articles or poetry passages. Many real-world applications fall between the two extremes, for instance text classification for the automatic analysis of emails and their routing to a suitable department in a corporation does not require an in-depth understanding of the text, but needs to deal with a much larger vocabulary and more diverse syntax than the management of simple queries to database tables with fixed schemata. Throughout the years various attempts at processing natural language or English-like sentences presented to computers have taken place at varying degrees of complexity. Some attempts have not resulted in systems with deep understanding, but have helped overall system usability. For example, Wayne Ratliff originally developed the Vulcan program with an English-like syntax to mimic the English speaking computer in Star Trek. Vulcan later became the dBase system whose easy-to-use syntax effectively launched the personal computer database industry. Systems with an easy-to-use or English-like syntax are, however, quite distinct from systems that use a rich lexicon and include an internal representation (often as first order logic) of the semantics of natural language sentences. Hence the breadth and depth of "understanding" aimed at by a system determine both the complexity of the system (and the implied challenges) and the types of applications it can deal with. The "breadth" of a system is measured by the sizes of its vocabulary and grammar. The "depth" is measured by the degree to which its understanding approximates that of a fluent native speaker. At the narrowest and shallowest, English-like command interpreters require minimal complexity, but have a small range of applications. Narrow but deep systems explore and model mechanisms of understanding, but they still have limited application. Systems that attempt to understand the contents of a document such as a news release beyond simple keyword matching and to judge its suitability for a user are broader and require significant complexity, but they are still somewhat shallow. Systems that are both very broad and very deep are beyond the current state of the art. == Components and architecture == Regardless of the approach used, most NLU systems share some common components. The system needs a lexicon of the language and a parser and grammar rules to break sentences into an internal representation. The construction of a rich lexicon with a suitable ontology requires significant effort, e.g., the Wordnet lexicon required many person-years of effort. The system also needs theory from semantics to guide the comprehension. The interpretation capabilities of a language-understanding system depend on the semantic theory it uses. Competing semantic theories of language have specific trade-offs in their suitability as the basis of computer-automated semantic interpretation. These range from naive semantics or stochastic semantic analysis to the use of pragmatics to derive meaning from context. Semantic parsers convert natural-language texts into formal meaning representations. Advanced applications of NLU also attempt to incorporate logical inference within their framework. This is generally achieved by mapping the derived meaning into a set of assertions in predicate logic, then using logical deduction to arrive at conclusions. Therefore, systems based on functional languages such as Lisp need to include a subsystem to represent logical assertions, while logic-oriented systems such as those using the language Prolog generally rely on an extension of the built-in logical representation framework. The management of context in NLU can present special challenges. A large variety of examples and counter examples have resulted in multiple approaches to the formal modeling of context, each with specific strengths and weaknesses.

  Read more →
• 

  List of security assessment tools

  This is a list of available software and hardware tools that are designed for or are particularly suited to various kinds of security assessment and security testing. == Operating systems and tool suites == Several operating systems and tool suites provide bundles of tools useful for various types of security assessment. === Operating system distributions === Kali Linux (formerly BackTrack), a penetration-test-focused Linux distribution based on Debian Pentoo, a penetration-test-focused Linux distribution based on Gentoo ParrotOS, a Linux distro focused on penetration testing, forensics, and online anonymity. == Tools ==

  Read more →
• 

  History of machine translation

  Machine translation is a sub-field of computational linguistics that investigates the use of software to translate text or speech from one natural language to another. In the 1950s, machine translation became a reality in research, although references to the subject can be found as early as the 17th century. The Georgetown experiment, which involved successful fully automatic translation of more than sixty Russian sentences into English in 1954, was one of the earliest recorded projects. Researchers of the Georgetown experiment asserted their belief that machine translation would be a solved problem within a few years. In the Soviet Union, similar experiments were performed shortly after. Consequently, the success of the experiment ushered in an era of significant funding for machine translation research in the United States. The achieved progress was much slower than expected; in 1966, the ALPAC report found that ten years of research had not fulfilled the expectations of the Georgetown experiment and resulted in dramatically reduced funding. Interest grew in statistical models for machine translation, which became more common and also less expensive in the 1980s as available computational power increased. Although there exists no autonomous system of "fully automatic high quality translation of unrestricted text," there are many programs now available that are capable of providing useful output within strict constraints. Several of these programs are available online, such as Google Translate and the SYSTRAN system that powers AltaVista's BabelFish (which was replaced by Microsoft Bing translator in May 2012). == The beginning == The origins of machine translation can be traced back to the work of Al-Kindi, a 9th-century Arabic cryptographer who developed techniques for systemic language translation, including cryptanalysis, frequency analysis, and probability and statistics, which are used in modern machine translation. The idea of machine translation later appeared in the 17th century. In 1629, René Descartes proposed a universal language, with equivalent ideas in different tongues sharing one symbol. In the mid-1930s the first patents for "translating machines" were applied for by Georges Artsrouni, for an automatic bilingual dictionary using punched tape. Russian Peter Troyanskii submitted a more detailed proposal that included both the bilingual dictionary and a method for dealing with grammatical roles between languages, based on the grammatical system of Esperanto. This system was separated into three stages: stage one consisted of a native-speaking editor in the source language to organize the words into their logical forms and to exercise the syntactic functions; stage two required the machine to "translate" these forms into the target language; and stage three required a native-speaking editor in the target language to normalize this output. Troyanskii's proposal remained unknown until the late 1950s, by which time computers were well-known and utilized. == The early years == The first set of proposals for computer based machine translation was presented in 1949 by Warren Weaver, a researcher at the Rockefeller Foundation, "Translation memorandum". These proposals were based on information theory, successes in code breaking during the Second World War, and theories about the universal principles underlying natural language. A few years after Weaver submitted his proposals, research began in earnest at many universities in the United States. On 7 January 1954 the Georgetown–IBM experiment was held in New York at the head office of IBM. This was the first public demonstration of a machine translation system. The demonstration was widely reported in the newspapers and garnered public interest. The system itself, however, was no more than a "toy" system. It had only 250 words and translated 49 carefully selected Russian sentences into English – mainly in the field of chemistry. Nevertheless, it encouraged the idea that machine translation was imminent and stimulated the financing of the research, not only in the US but worldwide. Early systems used large bilingual dictionaries and hand-coded rules for fixing the word order in the final output which was eventually considered too restrictive in linguistic developments at the time. For example, generative linguistics and transformational grammar were exploited to improve the quality of translations. During this period operational systems were installed. The United States Air Force used a system produced by IBM and Washington University in St. Louis, while the Atomic Energy Commission and Euratom, in Italy, used a system developed at Georgetown University. While the quality of the output was poor it met many of the customers' needs, particularly in terms of speed. At the end of the 1950s, Yehoshua Bar-Hillel was asked by the US government to look into machine translation, to assess the possibility of fully automatic high-quality translation by machines. Bar-Hillel described the problem of semantic ambiguity or double-meaning, as illustrated in the following sentence: Little John was looking for his toy box. Finally he found it. The box was in the pen. The word pen may have two meanings: the first meaning, something used to write in ink with; the second meaning, a container of some kind. To a human, the meaning is obvious, but Bar-Hillel claimed that without a "universal encyclopedia" a machine would never be able to deal with this problem. At the time, this type of semantic ambiguity could only be solved by writing source texts for machine translation in a controlled language that uses a vocabulary in which each word has exactly one meaning. == The 1960s, the ALPAC report and the seventies == Research in the 1960s in both the Soviet Union and the United States concentrated mainly on the Russian–English language pair. The objects of translation were chiefly scientific and technical documents, such as articles from scientific journals. The rough translations produced were sufficient to get a basic understanding of the articles. If an article discussed a subject deemed to be confidential, it was sent to a human translator for a complete translation; if not, it was discarded. A great blow came to machine-translation research in 1966 with the publication of the ALPAC report. The report was commissioned by the US government and delivered by ALPAC, the Automatic Language Processing Advisory Committee, a group of seven scientists convened by the US government in 1964. The US government was concerned that there was a lack of progress being made despite significant expenditure. The report concluded that machine translation was more expensive, less accurate and slower than human translation, and that despite the expenditures, machine translation was not likely to reach the quality of a human translator in the near future. The report recommended, however, that tools be developed to aid translators – automatic dictionaries, for example – and that some research in computational linguistics should continue to be supported. The publication of the report had a profound impact on research into machine translation in the United States, and to a lesser extent the Soviet Union and United Kingdom. Research, at least in the US, was almost completely abandoned for over a decade. In Canada, France and Germany, however, research continued. In the US the main exceptions were the founders of SYSTRAN (Peter Toma) and Logos (Bernard Scott), who established their companies in 1968 and 1970 respectively and served the US Department of Defense. In 1970, the SYSTRAN system was installed for the United States Air Force, and subsequently by the Commission of the European Communities in 1976. The METEO System, developed at the Université de Montréal, was installed in Canada in 1977 to translate weather forecasts from English to French, and was translating close to 80,000 words per day or 30 million words per year until it was replaced by a competitor's system on 30 September 2001. While research in the 1960s concentrated on limited language pairs and input, demand in the 1970s was for low-cost systems that could translate a range of technical and commercial documents. This demand was spurred by the increase of globalisation and the demand for translation in Canada, Europe, and Japan. == The 1980s and early 1990s == By the 1980s, both the diversity and the number of installed systems for machine translation had increased. A number of systems relying on mainframe technology were in use, such as SYSTRAN, Logos, Ariane-G5, and Metal. As a result of the improved availability of microcomputers, there was a market for lower-end machine translation systems. Many companies took advantage of this in Europe, Japan, and the USA. Systems were also brought onto the market in China, Eastern Europe, Korea, and the Soviet Union. During the 1980s there was a lot of activity in MT in Japan especially. With the fifth-generation co

  Read more →
• 

  Logical Machine Corporation

  Logical Machine Corporation (LOMAC) was an American computer company active from the mid-1970s to the 1980s and based in the San Francisco Bay Area. It was founded as John Peers and Company by the British entrepreneur John Peers in 1974. LOMAC developed the ADAM, a minicomputer which ran a specialized compiler for the company's natural English programming language. Throughout the late 1970s, the company acquired several technology firms, including Byte, Inc., the owner of the Byte Shop retail chain. Despite its unique approach to computing and earning $5 million in revenue in 1977, LOMAC struggled as the industry began to standardize around the IBM Personal Computer (IBM PC). Following Peers's departure in 1980, the company rebranded as Logical Business Machines, Inc. (LBM, or simply Logical), and attempted to pivot toward IBM PC–compatible hardware. However, financial difficulties led to the company filing for Chapter 11 bankruptcy in 1984. After emerging from bankruptcy in 1985 with new investment, Logical ceased hardware manufacturing to focus exclusively on software development and value-added reselling. == History == John Peers (born 1942) founded Logical Machine Corporation as John Peers and Company in September 1974. The company originally occupied a 4,500-square-foot office in Burlingame, California. The company was Peers' fourth; he had recently sold off Allied Business Systems of London to Trafalgar House in 1974. Peers sought to set up manufacturing in an agricultural zone in Ukiah, California. Following a delay, caused in part by concerned residents, a 30,000-square-foot plant was raised in Burke Hill, three miles south of Ukiah. The Ukiah plant was built to mass manufacture the company's ADAM minicomputer. The ADAM computer ran a specialized compiler for the company's natural English programming language; that is to say, the programming language attempted to closely emulate English syntax. Prototypes of the ADAM were built in May 1974, based on specifications devised in October 1973. Peers had yet to patent the technology as of June 1975. The ADAM's central processing unit was bolted onto an 7-by-6-foot L-shaped desk, on which rested its terminal. Twenty units of the ADAM were installed between April 1975 and February 1976, out of a backlog of orders for 3,500 from 500 clients, manufactured out of the company's Burlingame headquarters. It cost US$40,000. A controversial print advertisement featuring a naked woman seated at an ADAM terminal—as a pastiche of Adam and Eve—was recalled in early 1976 as a result of outcry from the National Organization for Women. The company changed its name to Logical Machine Corporation (LOMAC) in October 1976 and moved its headquarters to a 26,000-square-foot building in Sunnyvale, California, in anticipation of a ramping up of orders for the ADAM. The company originally occupied half of the building; they later purchased the other half from the tenant in July 1977 to double its manufacturing output. For fiscal year 1977, the company earned $5 million in revenue. In December 1977, LOMAC acquired Byte, Inc.—the proprietor of The Byte Shop, the first computer retail chain—from Paul Terrell and Boyd Wilson for an unspecified amount. The Byte Shop had 65 locations in the San Francisco Bay Area in 1978; it catered mainly to hobbyists with low cost microcomputer kits, in contrast to the high cost of LOMAC's ADAM. By July 1978, however, LOMAC were able to reduce the price of the ADAM down to $15,000. The company by that point had shipped their 50th ADAM and expanded to 14 countries. Also in 1978, LOMAC acquired Mass Memory—a high-tech optical storage company based in Phoenix, Arizona, whose products had storage capacities on the order gigabytes and terabytes—and Centigram, makers of the Mike—a computer with speech recognition. Later that year, the company introduced Tina, a low-cost version of the ADAM. LOMAC suffered losses that year and appointed Jerry Brandt to the board of directions, naming him chief operating officer, in August 1978. Brandt had Logical absorb Mass Memory and Centigram into the parent operations, shutting down their respective plants in the process, converted 10 Byte Shops to franchises and opened 25 more franchised Byte locations, and stopped direct sales of LOMAC's business computer products. By the beginning of 1979, LOMAC was profitable once more, and Brandt was let go from LOMAC. Peers left LOMAC in 1980, following a slump in the company's sales. He became an executive director of the United States Robotics Society, a consortium for industrial automation companies, that year. Following Peers' departure, LOMAC changed its name to Logical Business Machines, adopting the name of its European subsidiary. In 1983, the company announced a 16-bit clone of the IBM PC, called the Logical L-XT, which featured a 10-MB hard drive, 320-KB floppy drive and 192 KB of RAM, and a real-time clock, and came shipped with various software (including MS-DOS, a word processor, and a spreadsheet application) and an amber CRT monitor. The following year, the company introduced L-NET, a local area network system based on the L-XT that could link up to 64 computers. L-NET came shipped with a natural programming language, Diplomat—a descendant of the programming language used on the ADAM. In June 1983, Logical sued Coleco Industries over trademark infringement with the latter's to-be-released Adam microcomputer. Logical cited confusion from their existing ADAM customer base caused by the announcement of the Coleco Adam as the basis for the suit. Coleco challenged Logical in the press, writing that Logical's rights to the Adam trademark for use in computers had lapsed earlier in the year. The two settled out of court, with Coleco agreeing to license the Adam name from Logical in exchange for unlimited rights to the Adam trademark. Logical halted development of the L-XT when they filed for Chapter 11 bankruptcy in July 1984. The company had been $4 million in debt. They emerged from bankruptcy in September 1985, after being infused with $2 million from Carat Ltd. The latter immediately received a little less than 50 percent ownership in Logical—this stake set to grow to over 50 percent over the next six months. As part of the terms of exiting bankruptcy, Logical stopped manufacturing hardware and strictly became a software development company and value-added reseller of computer systems.

  Read more →
• 

  Language identification

  In natural language processing, language identification or language guessing is the problem of determining which natural language a given content is in. Computational approaches to this problem view it as a special case of text categorization, solved with various statistical methods. == Overview == === Logical approach === A common non-statistical intuitive approach (though highly uncertain) is to look for common letter combinations, or distinctive diacritics or punctuation. === Statistical approach === There are several statistical approaches to language identification. An older statistical method by Grefenstette was based on the frequency of short n-grams, which are often function morphemes. For example, "ing" is more common in English than in French, while the sequence "que" is more common in French. Given a new page found on the Web, one counts the number of occurrences of each such short sequence and picks the language whose frequency table it matches the most. One technique is to compare the compressibility of the text to the compressibility of texts in a set of known languages. This approach is known as mutual information based distance measure. The same technique can also be used to empirically construct family trees of languages which closely correspond to the trees constructed using historical methods. Mutual information based distance measure is essentially equivalent to more conventional model-based methods and is not generally considered to be either novel or better than simpler techniques. Another technique, as described by Cavnar and Trenkle (1994) and Dunning (1994) is to create a language n-gram model from a "training text" for each of the languages. These models can be based on characters (Cavnar and Trenkle) or encoded bytes (Dunning); in the latter, language identification and character encoding detection are integrated. Then, for any piece of text needing to be identified, a similar model is made, and that model is compared to each stored language model. The most likely language is the one with the model that is most similar to the model from the text needing to be identified. This approach can be problematic when the input text is in a language for which there is no model. In that case, the method may return another, "most similar" language as its result. Also problematic for any approach are pieces of input text that are composed of several languages, as is common on the Web. As of 2025, a commonly used baseline method is via the fastText library, which has comparable classification accuracy as deep learning techniques, but much faster. == Identifying similar languages == One of the great bottlenecks of language identification systems is to distinguish between closely related languages. Similar languages like Bulgarian and Macedonian or Indonesian and Malay present significant lexical and structural overlap, making it challenging for systems to discriminate between them. In 2014 the DSL shared task has been organized providing a dataset (Tan et al., 2014) containing 13 different languages (and language varieties) in six language groups: Group A (Bosnian, Croatian, Serbian), Group B (Indonesian, Malaysian), Group C (Czech, Slovak), Group D (Brazilian Portuguese, European Portuguese), Group E (Peninsular Spanish, Argentine Spanish), Group F (American English, British English). The best system reached performance of over 95% results (Goutte et al., 2014). Results of the DSL shared task are described in Zampieri et al. 2014. == Software == Apache OpenNLP includes char n-gram based statistical detector and comes with a model that can distinguish 103 languages Apache Tika contains a language detector for 18 languages

  Read more →
• 

  The Triple Revolution

  "The Triple Revolution" was an open memorandum sent to U.S. President Lyndon B. Johnson and other government figures on March 22, 1964. It concerned three megatrends of the time: increasing use of automation, the nuclear arms race, and advancements in human rights. Drafted under the auspices of the Center for the Study of Democratic Institutions, it was signed by an array of noted social activists, professors, and technologists who identified themselves as the Ad Hoc Committee on the Triple Revolution. The chief initiator of the proposal was W. H. "Ping" Ferry, at that time a vice-president of CSDI, basing it in large part on the ideas of the futurist Robert Theobald. == Overview == The statement identified three revolutions underway in the world: the cybernation revolution of increasing automation; the weaponry revolution of mutually assured destruction; and the human rights revolution. It discussed primarily the cybernation revolution. The committee claimed that machines would usher in "a system of almost unlimited productive capacity" while continually reducing the number of manual laborers needed, and increasing the skill needed to work, thereby producing increasing levels of unemployment. It proposed that the government should ease this transformation through large-scale public works, low-cost housing, public transit, electrical power development, income redistribution, union representation for the unemployed, and government restraint on technology deployment. == Legacy == Martin Luther King Jr.'s final Sunday sermon, delivered six days before his April 1968 assassination, explicitly references the thesis of "The Triple Revolution": There can be no gainsaying of the fact that a great revolution is taking place in the world today. In a sense it is a triple revolution: that is, a technological revolution, with the impact of automation and cybernation; then there is a revolution in weaponry, with the emergence of atomic and nuclear weapons of warfare; then there is a human rights revolution, with the freedom explosion that is taking place all over the world. Yes, we do live in a period where changes are taking place. And there is still the voice crying through the vista of time saying, "Behold, I make all things new; former things are passed away." In Harlan Ellison's 1967 anthology Dangerous Visions, Philip José Farmer's story "Riders of the Purple Wage" uses the Triple Revolution document as the premise of a future society, in which the "purple wage" of the title is a guaranteed income dole on which most of the population lives. At the 1968 World Science Fiction Convention in San Francisco, Farmer delivered a lengthy Guest of Honor speech in which he called for the founding of a grassroots activist organization called REAP which would work for implementation of the Ad Hoc Committee's recommendations. Looking back on the proposal in his 2008 book, Daniel Bell wrote: "the cybernetic revolution quickly proved to be illusory. There were no spectacular jumps in productivity. ... Cybernation had proved to be one more instance of the penchant for overdramatizing a momentary innovation and blowing it up far out of proportion to its actuality. ... The image of a completely automated production economy—with an endless capacity to turn out goods—was simply a social-science fiction of the early 1960s. Paradoxically, the vision of Utopia was suddenly replaced by the spectre of Doomsday. In place of the early-sixties theme of endless plenty, the picture by the end of the decade was one of a fragile planet of limited resources whose finite stocks were being rapidly depleted, and whose wastes from soaring industrial production were polluting the air and waters." In his 2015 book Rise of the Robots, Martin Ford claims The Triple Revolution's predictions of steady decline in future employment were not wrong, but rather premature. He cites "Seven Deadly Trends" that began in the 1970s-1980s and by the mid-2010s appeared set to continue: Stagnation in real wages Decline in labor's share of national income in many countries (breakdown of Bowley's law), while corporate profits increased Declining labor force participation Diminishing job creation, lengthening jobless recoveries, and soaring long-term unemployment Rising inequality Declining incomes, and underemployment for recent college graduates Polarization and part-time jobs (middle-class jobs are disappearing, to be replaced by a small number of high-paying jobs and large number of low-paying jobs) According to Ford, the 1960s were part of what in retrospect seems like a golden age for labor in the United States, when productivity and wages rose together in near lockstep, and unemployment was low. But after about 1980, wages began stagnating while productivity continued to rise. Labor's share of the economic output began to decline. Ford describes the role that automation and information technology play in these trends, and how new technologies including narrow AI threaten to destroy jobs faster than displaced workers can be retrained for new jobs, before automation takes the new jobs as well. This includes many job categories, such as in transportation, that were never threatened by automation before. According to a 2013 study, about 47% of US jobs are susceptible to automation. == Signatories ==

  Read more →
• 

  Artificial intelligence in fraud detection

  Artificial intelligence is used by many different businesses and organizations. It is widely used in the financial sector, especially by accounting firms, to help detect fraud. In 2022, PricewaterhouseCoopers reported that fraud has impacted 46% of all businesses in the world. The shift from working in person to working from home has brought increased access to data. According to an FTC (Federal Trade Commission) study from 2022, customers reported fraud of approximately $5.8 billion in 2021, an increase of 70% from the year before. The majority of these scams were imposter scams and online shopping frauds. Furthermore, artificial intelligence plays a crucial role in developing advanced algorithms and machine learning models that enhance fraud detection systems, enabling businesses to stay ahead of evolving fraudulent tactics in an increasingly digital landscape. == Tools == === Expert systems === Expert systems were first designed in the 1970s as an expansion into artificial intelligence technologies. Their design is based on the premise of decreasing potential user error in decision-making and emulating mental reasoning used by experts in a particular field. They differentiate themselves from traditional linear reasoning models by separating identified points in data and processing them individually at the same time. Though, these systems do not rely purely on machine-learned intelligence. Information regarding rules, practices, and procedures in the form of "if-then" statements are implemented into the programming of the system. Users interact with the system by feeding information into the system either through direct entry or import of external data. An inference system compares the information provided by the user with corresponding rules that are believed to specifically apply to the situation. Using this information and the corresponding rules will be used to create a solution to the user's query. Expert systems will generally not operate properly when the common procedures for a specified situation are ambiguous due to the need for well-defined rules. Implementation of expert systems in accounting procedures is feasible in areas where professional judgment is required. Situations where expert systems are applicable include investigations into transactions that involve potential fraudulent entries, instances of going concern, and the evaluation of risk in the planning stages of an audit. === Continuous auditing === Continuous auditing is a set of processes that assess various aspects of information gathered in an audit to classify areas of risk and potential weaknesses in financial Internal controls at a more frequent rate than traditional methods. Instead of analyzing recorded transactions and journal entries periodically, continuous auditing focuses on interpreting the character of these actions more frequently. The frequency of these processes being undertaken as well as highlighting areas of importance is up to the discretion of their implementer, who commonly makes such decisions based on the level of risk in the accounts being evaluated and the goals of implementing the system. Performance of these processes can occur as frequently as being nearly instantaneous with an entry being posted. The processes involved with analyzing financial data in continuous auditing can include the creation of spreadsheets to allow for interactive information gathering, calculation of financial ratios for comparison with previously created models, and detection of errors in entered figures. A primary goal of this practice is to allow for quicker and easier detection of instances of faulty controls, errors, and instances of fraud. === Machine learning and deep learning === The ability of machine learning and deep learning to swiftly and effectively sort through vast volumes of data in the forms of various documents relevant to companies and documents being audited makes them applicable to the domains of audit and fraud detection. Examples of this include recognizing key language in contracts, identifying levels of risk of fraud in transactions, and assessing journal entries for misstatement. == Applications == === 'Big 4' Accounting Firms === Deloitte created an Al-enabled document-reviewing system in 2014. The system automates the method of reviewing and extracting relevant information from different business documents. Deloitte claims that this innovation has made a difference by reducing time spent going through lawful contract documents, invoices, money-related articulations, and board minutes by up to 50%. Working with IBM's Watson, Deloitte is developing cognitive-technology-enhanced commerce arrangements for its clients. LeasePoint is fueled by IBM TRIRIGA (this product evolved into IBM Maximo Real Estate and Facilities) and uses Deloitte's industrial information to create an end-to-end leasing portfolio. Automated Cognitive Resource Assessment employs IBM's Maximo innovation to progress the proficiency of asset inspection. Ernst and Young (EY) connected Al to the investigation of lease contracts. EY (Australia) has also received Al-enabled auditing technology. Collaborating with H20.ai, PwC developed an Al-enabled framework (GL.ai) capable of analyzing reports and preparing reports. PwC claims to have made a significant investment in normal dialect processing (NLP), an Al-enabled innovation to process unstructured information efficiently. KPMG built a portfolio of Al instruments, called KPMG Ignite, to upgrade trade decisions and forms. Working with Microsoft and IBM Watson, KPMG is creating instruments to coordinate Al, data analytics, Cognitive Technologies, and RPA. == Advantages == === Efficiency === The process of auditing an entity in an attempt to detect fraudulent activity requires the repeating of investigatory processes until an error or misstatement may be identified. Under traditional methods, these processes would be carried out by a human being. Proponents of artificial intelligence in fraud detection have stated that these traditional methods are inefficient and can be more quickly accomplished with the aid of an intelligent computing system. A survey of 400 chief executive officers created by KPMG in 2016 found that approximately 58% believed that artificial intelligence would play a key role in making audits more efficient in the future. === Data interpretation === Higher levels of fraud detection entail the use of professional judgement to interpret data. Supporters of artificial intelligence being used in financial audits have claimed that increased risks from instances of higher data interpretation can be minimized through such technologies. One necessary element of an audit of financial statements that requires professional judgement is the implementation of thresholds for materiality. Materiality entails the distinction between errors and transactions in financial statements that would impact decisions made by users of those financial statements. The threshold for materiality in an audit is set by the auditor based on various factors. Artificial intelligence has been used to interpret data and suggest materiality thresholds to be implemented through the use of expert systems. === Decreased costs === Those in favor of using artificial intelligence to complete investigations of fraud have stated that such technologies decrease the amount of time required to complete tasks that are repetitive. The claim further states that such efficiencies allow for lowered resource requirements, which can then be further spent on tasks that have not been fully automated. The audit firm Ernst & Young has posited these claims by declaring that their deep learning systems have been used to reduce time spent on administrative tasks by analyzing relevant audit documents. According to the firm, this has allowed their employees to focus more on judgement and analysis. == Disadvantages == === Job Displacement === The inescapable reception of computer based intelligence and robotization advancements might prompt critical work relocation across different enterprises. As artificial intelligence frameworks become more equipped for performing undertakings customarily completed by people, there is a worry that specific work jobs could become out of date, prompting joblessness and financial imbalance. === Initial investment requirement === Along with a knowledge of coding and building systems through computer programs, we are seeing the advantages of these systems, but since they are so new, they require a large investment to start building such a system. Any firm that is planning on implementing an AI system to detect fraud must hire a team of data scientists, along with upgrading their cloud system and data storage. The system must be consistently monitored and updated to be the most efficient form of itself, otherwise the likelihood of fraud being involved in those transactions increases. If one does not initially invest in such a syst

  Read more →
• 

  Phase correlation

  Phase correlation is an approach to estimate the relative translative offset between two similar images (digital image correlation) or other data sets. It is commonly used in image registration and relies on a frequency-domain representation of the data, usually calculated by fast Fourier transforms. The term is applied particularly to a subset of cross-correlation techniques that isolate the phase information from the Fourier-space representation of the cross-correlogram. == Example == The following image demonstrates the usage of phase correlation to determine relative translative movement between two images corrupted by independent Gaussian noise. The image was translated by (20,23) pixels. Accordingly, one can clearly see a peak in the phase-correlation representation at approximately (20,23). == Method == Given two input images g a {\displaystyle \ g_{a}} and g b {\displaystyle \ g_{b}} : Apply a window function (e.g., a Hamming window) on both images to reduce edge effects (this may be optional depending on the image characteristics). Then, calculate the discrete 2D Fourier transform of both images. G a = F { g a } , G b = F { g b } {\displaystyle \ \mathbf {G} _{a}={\mathcal {F}}\{g_{a}\},\;\mathbf {G} _{b}={\mathcal {F}}\{g_{b}\}} Calculate the cross-power spectrum by taking the complex conjugate of the second result, multiplying the Fourier transforms together elementwise, and normalizing this product elementwise. R = G a ∘ G b ∗ | G a ∘ G b ∗ | {\displaystyle \ R={\frac {\mathbf {G} _{a}\circ \mathbf {G} _{b}^{}}{|\mathbf {G} _{a}\circ \mathbf {G} _{b}^{}|}}} Where ∘ {\displaystyle \circ } is the Hadamard product (entry-wise product) and the absolute values are taken entry-wise as well. Written out entry-wise for element index ( j , k ) {\displaystyle (j,k)} : R j k = G a , j k ⋅ G b , j k ∗ | G a , j k ⋅ G b , j k ∗ | {\displaystyle \ R_{jk}={\frac {G_{a,jk}\cdot G_{b,jk}^{}}{|G_{a,jk}\cdot G_{b,jk}^{}|}}} Obtain the normalized cross-correlation by applying the inverse Fourier transform. r = F − 1 { R } {\displaystyle \ r={\mathcal {F}}^{-1}\{R\}} Determine the location of the peak in r {\displaystyle \ r} . ( Δ x , Δ y ) = arg ⁡ max ( x , y ) { r } {\displaystyle \ (\Delta x,\Delta y)=\arg \max _{(x,y)}\{r\}} === Subpixel registration === Commonly, interpolation methods are used to estimate the peak location in the cross-correlogram to non-integer values, despite the fact that the data are discrete, and this procedure is often termed 'subpixel registration'. A large variety of subpixel interpolation methods are given in the technical literature. Common peak interpolation methods such as parabolic interpolation have been used, and the OpenCV computer vision package uses a centroid-based method, though these generally have inferior accuracy compared to more sophisticated methods. Because the Fourier representation of the data has already been computed, it is especially convenient to use the Fourier shift theorem with real-valued (sub-integer) shifts for this purpose, which essentially interpolates using the sinusoidal basis functions of the Fourier transform. An especially popular FT-based estimator is given by Foroosh et al. In this method, the subpixel peak location is approximated by a simple formula involving peak pixel value and the values of its nearest neighbors, where r ( 0 , 0 ) {\displaystyle r_{(0,0)}} is the peak value and r ( 1 , 0 ) {\displaystyle r_{(1,0)}} is the nearest neighbor in the x direction (assuming, as in most approaches, that the integer shift has already been found and the comparand images differ only by a subpixel shift). Δ x = r ( 1 , 0 ) r ( 1 , 0 ) ± r ( 0 , 0 ) {\displaystyle \ \Delta x={\frac {r_{(1,0)}}{r_{(1,0)}\pm r_{(0,0)}}}} The Foroosh et al. method is quite fast compared to most methods, though it is not always the most accurate. Some methods shift the peak in Fourier space and apply non-linear optimization to maximize the correlogram peak, but these tend to be very slow since they must apply an inverse Fourier transform or its equivalent in the objective function. It is also possible to infer the peak location from phase characteristics in Fourier space without the inverse transformation, as noted by Stone. These methods usually use a linear least squares (LLS) fit of the phase angles to a planar model. The long latency of the phase angle computation in these methods is a disadvantage, but the speed can sometimes be comparable to the Foroosh et al. method depending on the image size. They often compare favorably in speed to the multiple iterations of extremely slow objective functions in iterative non-linear methods. Since all subpixel shift computation methods are fundamentally interpolative, the performance of a particular method depends on how well the underlying data conform to the assumptions in the interpolator. This fact also may limit the usefulness of high numerical accuracy in an algorithm, since the uncertainty due to interpolation method choice may be larger than any numerical or approximation error in the particular method. Subpixel methods are also particularly sensitive to noise in the images, and the utility of a particular algorithm is distinguished not only by its speed and accuracy but its resilience to the particular types of noise in the application. == Rationale == The method is based on the Fourier shift theorem. Let the two images g a {\displaystyle \ g_{a}} and g b {\displaystyle \ g_{b}} be circularly-shifted versions of each other: g b ( x , y ) = d e f g a ( ( x − Δ x ) mod M , ( y − Δ y ) mod N ) {\displaystyle \ g_{b}(x,y)\ {\stackrel {\mathrm {def} }{=}}\ g_{a}((x-\Delta x){\bmod {M}},(y-\Delta y){\bmod {N}})} (where the images are M × N {\displaystyle \ M\times N} in size). Then, the discrete Fourier transforms of the images will be shifted relatively in phase: G b ( u , v ) = G a ( u , v ) e − 2 π i ( u Δ x M + v Δ y N ) {\displaystyle \mathbf {G} _{b}(u,v)=\mathbf {G} _{a}(u,v)e^{-2\pi i({\frac {u\Delta x}{M}}+{\frac {v\Delta y}{N}})}} One can then calculate the normalized cross-power spectrum to factor out the phase difference: R ( u , v ) = G a G b ∗ | G a G b ∗ | = G a G a ∗ e 2 π i ( u Δ x M + v Δ y N ) | G a G a ∗ e 2 π i ( u Δ x M + v Δ y N ) | = G a G a ∗ e 2 π i ( u Δ x M + v Δ y N ) | G a G a ∗ | = e 2 π i ( u Δ x M + v Δ y N ) {\displaystyle {\begin{aligned}R(u,v)&={\frac {\mathbf {G} _{a}\mathbf {G} _{b}^{}}{|\mathbf {G} _{a}\mathbf {G} _{b}^{}|}}\\&={\frac {\mathbf {G} _{a}\mathbf {G} _{a}^{}e^{2\pi i({\frac {u\Delta x}{M}}+{\frac {v\Delta y}{N}})}}{|\mathbf {G} _{a}\mathbf {G} _{a}^{}e^{2\pi i({\frac {u\Delta x}{M}}+{\frac {v\Delta y}{N}})}|}}\\&={\frac {\mathbf {G} _{a}\mathbf {G} _{a}^{}e^{2\pi i({\frac {u\Delta x}{M}}+{\frac {v\Delta y}{N}})}}{|\mathbf {G} _{a}\mathbf {G} _{a}^{}|}}\\&=e^{2\pi i({\frac {u\Delta x}{M}}+{\frac {v\Delta y}{N}})}\end{aligned}}} since the magnitude of an imaginary exponential always is one, and the phase of G a G a ∗ {\displaystyle \ \mathbf {G} _{a}\mathbf {G} _{a}^{}} always is zero. The inverse Fourier transform of a complex exponential is a Dirac delta function, i.e. a single peak: r ( x , y ) = δ ( x + Δ x , y + Δ y ) {\displaystyle \ r(x,y)=\delta (x+\Delta x,y+\Delta y)} This result could have been obtained by calculating the cross correlation directly. The advantage of this method is that the discrete Fourier transform and its inverse can be performed using the fast Fourier transform, which is much faster than correlation for large images. === Benefits === Unlike many spatial-domain algorithms, the phase correlation method is resilient to noise, occlusions, and other defects typical of medical or satellite images. The method can be extended to determine rotation and scaling differences between two images by first converting the images to log-polar coordinates. Due to properties of the Fourier transform, the rotation and scaling parameters can be determined in a manner invariant to translation. === Limitations === In practice, it is more likely that g b {\displaystyle \ g_{b}} will be a simple linear shift of g a {\displaystyle \ g_{a}} , rather than a circular shift as required by the explanation above. In such cases, r {\displaystyle \ r} will not be a simple delta function, which will reduce the performance of the method. In such cases, a window function (such as a Gaussian or Tukey window) should be employed during the Fourier transform to reduce edge effects, or the images should be zero padded so that the edge effects can be ignored. If the images consist of a flat background, with all detail situated away from the edges, then a linear shift will be equivalent to a circular shift, and the above derivation will hold exactly. The peak can be sharpened by using edge or vector correlation. For periodic images (such as a chessboard or picket fence), phase correlation may yield ambiguous results with several peaks in the resulting output. == Applications == Phase correlation is the preferred m

  Read more →