AI Assistant Quest 3

AI Assistant Quest 3 — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Softwarp

  Softwarp is a software technique to warp an image so that it can be projected on a curved screen. This can be done in real time by inserting the softwarp as a last step in the rendering cycle. The problem is to know how the image should be warped to look correct on the curved screen. There are several techniques to auto calibrate the warping by projecting a pattern and using cameras and/or sensors. The information from the sensors is sent to the software so that it can analyze the data and calculate the curvature of the projection screen. == Usage == The softwarp can be used to project virtual views on curved walls and domes. These are usually used in vehicle simulators, for instance boat-, car- and airplane simulators. To make it possible to cover a dome with a 360 degree view you need to use several projectors. A problem with using several projectors on the same screen is that the edges between the projected images get about twice the amount of light. This is solved by using a technique called edge blending. With this technique a “filter” is inserted on the edge that fades the image from 100% light strength (luminance) to 0% (the lowest luminance depends on the contrast ratio of the projector). == History == The first warping technologies used a hardware image processing unit to warp the image. This processing unit was inserted between the graphics card and the projector. The problem with this technique is that it depends on the type of signal and the quality of the signal from the graphics card to warp it correctly. The process unit also needs several lines of image information before it can start sending out the warped image. This adds a latency to the display system that could be a problem in simulators that need fast response time, for instance fighter jet simulators. Softwarping eliminates the latency.

  Read more →
• 

  Universal portfolio algorithm

  The universal portfolio algorithm is a portfolio selection algorithm from the field of machine learning and information theory. The algorithm learns adaptively from historical data and maximizes log-optimal growth rate in the long run, per the Kelly criterion. It was introduced by the late Stanford University information theorist Thomas M. Cover. The algorithm rebalances the portfolio at the beginning of each trading period. At the beginning of the first trading period it starts with a naive diversification. In the following trading periods the portfolio composition depends on the historical total return of all possible constant-rebalanced portfolios. The universal portfolio algorithm is the predecessor of the various online portfolio selection methodologies.

  Read more →
• 

  Video imprint (computer vision)

  Proposed as an extension of image epitomes in the field of video content analysis, video imprint is obtained by recasting video contents into a fixed-sized tensor representation regardless of video resolution or duration. Specifically, statistical characteristics are retained to some degrees so that common video recognition tasks can be carried out directly on such imprints, e.g., event retrieval, temporal action localization. It is claimed that both spatio-temporal interdependences are accounted for and redundancies are mitigated during the computation of video imprints. The option of computing video imprints exploiting the epitome model has the advantage of more flexible input feature formats and more efficient training stage for video content analysis.

  Read more →
• 

  Lexical Markup Framework

  Language resource management – Lexical markup framework (LMF; ISO 24613), produced by ISO/TC 37, is the ISO standard for natural language processing (NLP) and machine-readable dictionary (MRD) lexicons. The scope is standardization of principles and methods relating to language resources in the contexts of multilingual communication. == Objectives == The goals of LMF are to provide a common model for the creation and use of lexical resources, to manage the exchange of data between and among these resources, and to enable the merging of large number of individual electronic resources to form extensive global electronic resources. Types of individual instantiations of LMF can include monolingual, bilingual or multilingual lexical resources. The same specifications are to be used for both small and large lexicons, for both simple and complex lexicons, for both written and spoken lexical representations. The descriptions range from morphology, syntax, computational semantics to computer-assisted translation. The covered languages are not restricted to European languages but cover all natural languages. The range of targeted NLP applications is not restricted. LMF is able to represent most lexicons, including WordNet, EDR and PAROLE lexicons. == History == In the past, lexicon standardization has been studied and developed by a series of projects like GENELEX, EDR, EAGLES, MULTEXT, PAROLE, SIMPLE and ISLE. Then, the ISO/TC 37 National delegations decided to address standards dedicated to NLP and lexicon representation. The work on LMF started in Summer 2003 by a new work item proposal issued by the US delegation. In Fall 2003, the French delegation issued a technical proposition for a data model dedicated to NLP lexicons. In early 2004, the ISO/TC 37 committee decided to form a common ISO project with Nicoletta Calzolari (CNR-ILC Italy) as convenor and Gil Francopoulo (Tagmatica France) and Monte George (ANSI, United States) as editors. The first step in developing LMF was to design an overall framework based on the general features of existing lexicons and to develop a consistent terminology to describe the components of those lexicons. The next step was the actual design of a comprehensive model that best represented all of the lexicons in detail. A large panel of 60 experts contributed a wide range of requirements for LMF that covered many types of NLP lexicons. The editors of LMF worked closely with the panel of experts to identify the best solutions and reach a consensus on the design of LMF. Special attention was paid to the morphology in order to provide powerful mechanisms for handling problems in several languages that were known as difficult to handle. 13 versions have been written, dispatched (to the National nominated experts), commented and discussed during various ISO technical meetings. After five years of work, including numerous face-to-face meetings and e-mail exchanges, the editors arrived at a coherent UML model. In conclusion, LMF should be considered a synthesis of the state of the art in NLP lexicon field. == Current stage == The ISO number is 24613. The LMF specification has been published officially as an International Standard on 17 November 2008. == As one of the members of the ISO/TC 37 family of standards == The ISO/TC 37 standards are currently elaborated as high level specifications and deal with word segmentation (ISO 24614), annotations (ISO 24611 a.k.a. MAF, ISO 24612 a.k.a. LAF, ISO 24615 a.k.a. SynAF, and ISO 24617-1 a.k.a. SemAF/Time), feature structures (ISO 24610), multimedia containers (ISO 24616 a.k.a. MLIF), and lexicons (ISO 24613). These standards are based on low level specifications dedicated to constants, namely data categories (revision of ISO 12620), language codes (ISO 639), scripts codes (ISO 15924), country codes (ISO 3166) and Unicode (ISO 10646). The two level organization forms a coherent family of standards with the following common and simple rules: the high level specification provides structural elements that are adorned by the standardized constants; the low level specifications provide standardized constants as metadata. == Key standards == The linguistics constants like /feminine/ or /transitive/ are not defined within LMF but are recorded in the Data Category Registry (DCR) that is maintained as a global resource by ISO/TC 37 in compliance with ISO/IEC 11179-3:2003. And these constants are used to adorn the high level structural elements. The LMF specification complies with the modeling principles of Unified Modeling Language (UML) as defined by Object Management Group (OMG). The structure is specified by means of UML class diagrams. The examples are presented by means of UML instance (or object) diagrams. An XML DTD is given in an annex of the LMF document. == Model structure == LMF is composed of the following components: The core package that is the structural skeleton which describes the basic hierarchy of information in a lexical entry. Extensions of the core package which are expressed in a framework that describes the reuse of the core components in conjunction with the additional components required for a specific lexical resource. The extensions are specifically dedicated to morphology, MRD, NLP syntax, NLP semantics, NLP multilingual notations, NLP morphological patterns, multiword expression patterns, and constraint expression patterns. == Example == In the following example, the lexical entry is associated with a lemma clergyman and two inflected forms clergyman and clergymen. The language coding is set for the whole lexical resource. The language value is set for the whole lexicon as shown in the following UML instance diagram. The elements Lexical Resource, Global Information, Lexicon, Lexical Entry, Lemma, and Word Form define the structure of the lexicon. They are specified within the LMF document. On the contrary, languageCoding, language, partOfSpeech, commonNoun, writtenForm, grammaticalNumber, singular, plural are data categories that are taken from the Data Category Registry. These marks adorn the structure. The values ISO 639-3, clergyman, clergymen are plain character strings. The value eng is taken from the list of languages as defined by ISO 639-3. With some additional information like dtdVersion and feat, the same data can be expressed by the following XML fragment: This example is rather simple, while LMF can represent much more complex linguistic descriptions the XML tagging is correspondingly complex. == Selected publications about LMF == The first publication about the LMF specification as it has been ratified by ISO (this paper became (in 2015) the 9th most cited paper within the Language Resources and Evaluation conferences from LREC papers): Language Resources and Evaluation LREC-2006/Genoa: Gil Francopoulo, Monte George, Nicoletta Calzolari, Monica Monachini, Nuria Bel, Mandy Pet, Claudia Soria: Lexical Markup Framework (LMF) About semantic representation: Gesellschaft für linguistische Datenverarbeitung GLDV-2007/Tübingen: Gil Francopoulo, Nuria Bel, Monte George Nicoletta Calzolari, Monica Monachini, Mandy Pet, Claudia Soria: Lexical Markup Framework ISO standard for semantic information in NLP lexicons About African languages: Traitement Automatique des langues naturelles, Marseille, 2014: Mouhamadou Khoule, Mouhamad Ndiankho Thiam, El Hadj Mamadou Nguer: Toward the establishment of a LMF-based Wolof language lexicon (Vers la mise en place d'un lexique basé sur LMF pour la langue wolof) [in French] About Asian languages: Lexicography, Journal of ASIALEX, Springer 2014: Lexical Markup Framework: Gil Francopoulo, Chu-Ren Huang: An ISO Standard for Electronic Lexicons and its Implications for Asian Languages DOI 10.1007/s40607-014-0006-z About European languages: COLING 2010: Verena Henrich, Erhard Hinrichs: Standardizing Wordnets in the ISO Standard LMF: Wordnet-LMF for GermaNet EACL 2012: Judith Eckle-Kohler, Iryna Gurevych: Subcat-LMF: Fleshing out a standardized format for subcategorization frame interoperability EACL 2012: Iryna Gurevych, Judith Eckle-Kohler, Silvana Hartmann, Michael Matuschek, Christian M Meyer, Christian Wirth: UBY - A Large-Scale Unified Lexical-Semantic Resource Based on LMF. About Semitic languages: Journal of Natural Language Engineering, Cambridge University Press (to appear in Spring 2015): Aida Khemakhem, Bilel Gargouri, Abdelmajid Ben Hamadou, Gil Francopoulo: ISO Standard Modeling of a large Arabic Dictionary. Proceedings of the seventh Global Wordnet Conference 2014: Nadia B M Karmani, Hsan Soussou, Adel M Alimi: Building a standardized Wordnet in the ISO LMF for aeb language. Proceedings of the workshop: HLT & NLP within Arabic world, LREC 2008: Noureddine Loukil, Kais Haddar, Abdelmajid Ben Hamadou: Towards a syntactic lexicon of Arabic Verbs. Traitement Automatique des Langues Naturelles, Toulouse (in French) 2007: Khemakhem A, Gargouri B, Abdelwahed A, Francopoulo G: Modélisation des paradigmes de fl

  Read more →
• 

  List of C++ software and tools

  This is a list of notable software and programming tools for the C++ programming language, including libraries, web frameworks, programming language implementations, compilers, integrated development environments (IDEs), and other related software development utilities. == Compilers and IDEs == AMD Optimizing C/C++ Compiler — proprietary fork of LLVM + Clang for Linux C++Builder — rapid application development (RAD) environment Clang – compiler front end for C, C++, and Objective-C, part of LLVM CLion — C++ IDE by JetBrains Code::Blocks — open-source cross-platform IDE that supports multiple compilers including GCC, Clang and Visual C++ CodeLite — cross-platform IDE for the C/C++ programming languages using the wxWidgets toolkit CodeSynthesis XSD – XML Data Binding compiler Dev-C++ — MinGW or TDM-GCC 64bit port of the GCC as its compiler GCC – GNU Compiler Collection Intel C++ Compiler – proprietary high-performance compiler by Intel KDevelop — IDE part of the KDE project and is based on KDE Frameworks and Qt, the C/C++ backend uses Clang. Microsoft Visual C++ – proprietary C++ compiler and IDE for Windows Oracle Developer Studio — Solaris, OpenSolaris, RHEL, and Oracle Linux operating systems. Qt Creator — part of the SDK for the Qt GUI application development framework and uses the Qt API SlickEdit — text editor and IDE Turbo C++ – legacy C++ IDE and compiler popular in the 1990s Understand — IDE that enables static code analysis through an array of visuals, documentation, and metric tools. Visual Studio — integrated development environment by Microsoft that supports C++ Visual Studio Code — integrated development environment by Microsoft that supports C++ Xcode — Apple IDE to develop macOS, iOS, iPadOS, watchOS, tvOS, and visionOS that supports C++ source code. == Debuggers == Allinea DDT – a graphical debugger dbx — a proprietary source-level debugger GNU Debugger – portable debugger that runs on many Unix-like systems Modular Debugger — a C/C++ source level debugger for Solaris and derivates Undo LiveRecorder — time travel debugger == Libraries == Active Template Library – template-based C++ classes developed by Microsoft Apache MXNet — deep learning framework Apache Xerces – parsing, validating, and serializing and manipulating XML. Asio — networking and low-level I/O library Bitpit — scientific computing and mesh manipulation library Boost — collection of peer-reviewed libraries Botan — cryptography library C++ AMP – easy way to write programs that compile and execute on data-parallel hardware, such as graphics cards and GPUs C++ Standard Library — standard library for the language C++/WinRT — library for Microsoft's Windows Runtime platform, designed to provide access to modern Windows APIs. C3D Toolkit — geometric modeling kernel Caffe — deep learning framework CAPD — library for rigorous numerics and dynamical systems Cassowary — constraint-solving toolkit that efficiently solves systems of linear equalities and inequalities Cinder — library for creative coding ClanLib — cross-platform game SDK CMU Sphinx — speech recognition system Crypto++ — cryptographic algorithms library Dlib — general-purpose cross-platform library Dune — partial differential equations using grid-based methods fastText — text representation and text classification library FLTK — GUI toolkit Geospatial Data Abstraction Library — geospatial data access library GDCM — image library General Polygon Clipper — polygon clipping library GiNaC — computer algebra system that uses Class Library for Numbers for implementing arbitrary-precision arithmetic GLFW — OpenGL and window management library HarfBuzz — text rendering and typesetting library High Efficiency Image File Format — digital container format for storing individual digital images and image sequences ITK — image analysis library Integrated Performance Primitives — domain-specific functions that are highly optimized for diverse Intel architectures Jackets library — GPU computing library JSBSim — open-source flight dynamics model JUCE — framework for audio applications KDE Frameworks — collection of libraries from the KDE project KFRlib — digital signal processing framework LEMON — library for optimization and graph problems LevelDB — key–value database library Libdash — MPEG-DASH streaming library libLAS — reading and writing geospatial data encoded in the ASPRS laser (LAS) file format libsigc++ — typesafe callbacks LibRaw — free and open-source software library for reading raw files from digital cameras libSBML — application programming interface (API) for the SBML (Systems Biology Markup Language) LIBSVM — sequential minimal optimization (SMO) algorithm for kernelized support vector machines Libx — DirectX .X files graphics library Loki — collection of design patterns LIVE555 — multimedia streaming library Metakit — embedded database library Microsoft Cognitive Toolkit — deep learning toolkit Microsoft Foundation Class Library — object-oriented library for developing desktop applications for Windows Microsoft SEAL — homomorphic encryption library mlpack — machine learning and AI library Mobile Robot Programming Toolkit — robotics research library Object Windows Library — Object Windows Library, superseded by VCL Open Cascade — CAD and 3D modeling library Open Asset Import Library — 3D model import library to provide a common API for different 3D asset file formats OpenCV – computer vision and machine learning library OpenFOAM — computational fluid dynamics toolkit OpenH264 — real-time encoding and decoding video streams in the H.264/MPEG-4 AVC format OpenImageIO — image processing library Open Inventor — higher layer of programming for OpenGL OpenNN — neural networks library OpenVDB — sparse volume data library openFrameworks — creative coding toolkit OpenRTM-aist — robotics middleware library Oracle Template Library — database access that supports IBM Db2 and Open Database Connectivity Orfeo toolbox — remote sensing image processing library OR-Tools — operations research and optimization library Parallel Augmented Maps — ordered sets, ordered maps, and augmented maps. Parallel Patterns Library — Microsoft library that provides features for multicore programming PhysX — physics simulation engine POCO C++ Libraries — general-purpose libraries for software development Poppler — PDF rendering library Protocol Buffers — data serialization library Qt — cross-platform widget toolkit QuantLib — quantitative finance library RocksDB — key–value database library ROOT — data analysis framework from CERN ROS — robotics middleware Scintilla — source code editing component SDL – Simple DirectMedia Layer, cross-platform development library for multimedia applications SFML – Simple and Fast Multimedia Library Shark – open-source machine learning library Shogun — machine learning toolbox Skia — 2D graphics library Snappy — compression library Sound Object Library — music and audio development Standard Template Library — library of containers and algorithms Stapl — parallel computing library SymbolicC++ — symbolic computation library TerraLib — GIS library Tesseract OCR — optical character recognition engine Threading Building Blocks — parallel computing library ThreadWeaver — concurrency framework Tiny-dnn — lightweight deep learning library TinyXML — lightweight XML parser Tkrzw — key–value databases VTD-XML — XML processing library wxWidgets — cross-platform GUI toolkit x265 — video encoding library for HEVC XGBoost — gradient boosting library Windows Template Library — Win32 development === Mathematical and numerical libraries === == Tools == Akonadi — a C++/Qt framework and storage service for personal information management BALL – framework and set of algorithms and data structures for molecular modelling and computational structural bioinformatics Boehm garbage collector – conservative garbage collector CEGUI — C++ GUI library ClanLib – video game SDK CMake — cross-platform build system for C++ projects Confidential Consortium Framework – blockchain infrastructure framework DaviX – WebDAV client Doxygen — documentation generator for C++ and other languages FLTK — Fast Light Toolkit, cross-platform GUI library Fox toolkit — C++ GUI toolkit GDB — GNU Project debugger, often used with C and C++ gtkmm — official C++ interface for the popular GUI library GTK HOOPS Visualize — 3D computer graphics HPX — partitioned global address space Parallel programming Runtime System JUCE — cross-platform C++ audio and GUI framework LessTif — free clone of Motif GUI toolkit MFC — Microsoft Foundation Class library Nana — modern C++ GUI toolkit PTK Toolkit — 2D rendering engine and SDK, and portability options. Qt — cross-platform C++ GUI toolkit Rogue Wave — C++ GUI toolkit TnFOX — C++ GUI toolkit Ultimate++ — cross-platform C++ GUI framework Valgrind — tool suite for debugging and profiling C/C++ programs wxWidgets — cross-platform C++ GUI toolkit x265 — encoder for creating digital video streams in the High Efficiency Vid

  Read more →
• 

  EXAPT

  EXAPT (a portmanteau of "Extended Subset of APT") is a production-oriented programming language that allows users to generate NC programs with control information for machining tools and facilitates decision-making for production-related issues that may arise during various machining processes. EXAPT was first developed to address industrial requirements. Through the years, the company created additional software for the manufacturing industry. Today, EXAPT offers a suite of SAAS products and services for the manufacturing industry. The trade name, EXAPT, is most commonly associated with the CAD/CAM-System, production data, and tool management software of the German company EXAPT Systemtechnik GmbH based in Aachen, DE. == General == EXAPT is a modularly built programming system for all NC machining operations as Drilling Turning Milling Turn-Milling Nibbling Flame-, laser-, plasma- and water jet cutting Wire eroding Operations with industrial robots Due to the modular structure, the main product groups, EXAPTcam and EXAPTpdo, are gradually expandable and permit individual software for the manufacturing industry used individually and also in a compound with an existing IT environment. == Functionality == EXAPTcam meets the requirements for NC planning, especially for the cutting operations such as turning, drilling, and milling up to 5-axis simultaneous machining. Thereby new process technologies, tool, and machine concepts are constantly involved. In the NC programming data from different sources such as 3D CAD models, drawings or tables can flow in. The possibilities of NC programming reaches from language-oriented to feature-oriented NC programming. The integrated EXAPT knowledge database and intelligent and scalable automatisms support the user. The EXAPT NC planning also covers the generation of production information as clamping and tool plans, presetting data or time calculations. The realistic simulation possibilities of NC planning and NC control data provide with production reliability. EXAPTpdo (EXAPT ProductionsDataOrganization) provides a neutrally applicable technology platform for the information compound of the NC planning - to the shop floor. This applies to all NC production data that are necessary for the set-up of NC machines, for the provision, presetting, and stocking of manufacturing resources and provided by EXAPTpdo in a central database. Besides classical functions of the tool management system (TMS) as the management of cutting tools, measuring, testing and clamping devices the technology data management and tool lifecycle management (TLM) is also included. System-supported "where-used lists" helps to handle the manufacturing resource cycle by secured requirement determination and requirement fulfillment. Unnecessary transports and unplanned dispositive adjustments are dropped, stocks are reduced, set-up times reduced and the throughput is increased. EXAPTpdo synchronizes involved systems within the value chain. Stock systems, MES systems or ERP systems (e.g. from the purchasing or production areas) do not work in isolation from each other but they interact with each other. EXAPTpdo provides the base to Smart Factory, for more flexibility in production and faster communication. == History == With the foundation of the EXAPT-Verein in 1967 as spin-off of the universities Aachen, Berlin and Stuttgart the further development "EXAPT (EXtended Subset of APT)" of the programming language "APT (Automatically Programmed Tool)" was focused and so the first milestone for the EXAPT history was set. In the same year the system EXAPT 1 for drilling and simple milling tasks became available. 1969 The industrial application of EXAPT 2 for the programming of NC machines with 2-axis linear and path control begins. In the following year, the development of the EXAPT modular system starts. 1972 BASIC-EXAPT is provided for the universal, homogeneous programming of all NC tasks. The support is made by the EXAPT applications consultancy. 1973 EXAPT 1.1 is provided for the programming of straight-cut and continuous-path controlled drilling and milling machines and machining centers. At the Hanover Fair (IHA 73) the interactive access to a mainframe via a time-sharing terminal for the part program entry and correction is presented and starts the replacement of the punch card. 1974 The possibilities for the use of process computers for the NC data transfer are leveled out. EXAPT offers the possibility of the result simulation when using plotters with display of tool paths and tools in assignment to the workpiece. In April 1975, the EXAPT NC Systemtechnik GmbH was founded with the aim, of enabling entry into the NC technique for small and medium-sized companies by a complete product and service program. In the following year, the system portfolio is extended with further system modules and service programs and the provision of postprocessors. 1978 The development activities on the EXAPT module system started in 1970 are completed. Using modern software techniques, the different system parts BASIC-EXAPT, EXAPT 1, EXAPT 1.1, and EXAPT 2 are composed of a total system. System support and applications consultancy become a new working focus. From the beginning to the middle of the 1980s Beside new portable software modules for CAD/CAM applications (e. g. CAPEX, NESTEX, CADEX, CADCPL), the first version of the EXAPT DNC system and extensions of the EXAPT NC programming system for the machining of sculptured surfaces are presented. 1988 EXAPT expands the software product range by systems for tool data management (BMO) and production data management (FDO). EXAPT trains more than 1,300 course participants including company-specific courses. 1992 The first version of the completely new product generation EXAPTplus is presented and the agency in Dresden is opened. 1993 The company name "EXAPT NC Systemtechnik GmbH" is changed to "EXAPT Systemtechnik GmbH." EXAPTplus is presented on PC under Windows NT at the EMO '93. The decentralization of the use of EXAPT systems expands the range of applications. In the following year, EXAPT-DNC is executable under Windows on a customary PC. Special hardware is not needed and so it can be used in compound with the database-supported EXAPT production data management system (FDO). 1995 EXAPTplus is also ready for complex application cases such as machining of tubes at extrusion tools. EXAPT-CADI provides the transfer of 2D CAD data to EXAPTplus. With the new office Gießen the marketing is strengthened. In the following year the EXAPT NC editor is developed for the direct processing of NC control data with tool path display and visualization of the tools. In the course of the market entry of more comfortable 3D CAD systems for the solid modelling of components a detailed evaluation of current systems is made in 1997. It is decided to use SolidWorks as a reference system for the solid-oriented NC planning with EXAPT. 1998 The first solution for the transfer of geometry data between SolidWorks and EXAPTplus is generated. The EXAPT organization systems are (beside SQL) also executable under Oracle now. The use of client server solutions supports the data flow in the production. 1999 AFR functions are provided in connection with EXAPTsolid to support a workpiece modelling for NC. The millennium capability is ensured for all EXAPT systems. AFR is a ground-breaking for the integration of third-party products. 2002 EXAPT-BMG is developed for the generation and visualization of tools with additional functions for the assembly from components. The acquisition of tools with their geometric and technological presentation offers extensive support of the NC planning with EXAPT systems. 2003 EXAPTpdo is available to optimize the process chains in production planning and production execution optimally regarding the increasing requirements of changing production conditions. 2004 Diverse system extensions are made in EXAPTplus, EXAPTsolid, EXAPT NC editor, EXAPTpdo for the complete machining on turning/milling centres with result reliability because of more extensive simulation based on realNC (Tecnomatix), for the use of new complex tool systems and the compound use between ERP systems as SAP and intelligent CNC systems. In the following year, EXAPTpdo is extended for the cross-order set-up optimization and provision of manufacturing re-sources especially for single and small series production with connection to purchase and physical portfolio management. 2006 The EXAPT systems are available for extended use as an information platform for production, the time management, and similar requirements. EXAPTsolid is extended for the feature-oriented milling operation and machine simulation. The NC programming of complex machine tools, e.g. three-turret-turning/milling centers is supported by EXAPT systems, as well as the use of multi-functional tools. 2007 A module for 3-5-axis simultaneous milling machining is presented.

  Read more →
• 

  Xiaoice

  Xiaoice (Chinese: 微软小冰; pinyin: Wēiruǎn Xiǎobīng; lit. 'Microsoft Little Ice', IPA [wéɪɻwânɕjâʊpíŋ]) is an AI system developed by Microsoft (Asia) Software Technology Center (STCA) in 2014 based on an emotional computing framework. In July 2018, Microsoft Xiaoice released the 6th generation. Xiaoice Company, formerly known as AI Xiaoice Team of Microsoft Software Technology Center Asia, was Microsoft's largest independent R&D team for AI products. Founded in China in December 2013 with an expanded Japanese R&D team established in September 2014, this team is distributed in Beijing, Suzhou, and Tokyo, etc. with its technical products covering Asia. On 13 July 2020, Microsoft spun off its Xiaoice business into a separate company. As of 2021, the AI chatbots created and hosted by the Xiaoice framework accounted for about 60% of total global AI interactions. == Platforms, languages and countries == Xiaoice exists on more than 40 platforms in four countries (China, Japan, USA and Indonesia) including apps such as WeChat, QQ, Weibo and Meipai in China, and Facebook Messenger in USA and LINE in Japan. == Introduction == On 13 July 2020, Microsoft spun off its Xiaoice business into a separate company, aiming at enabling the Xiaoice product line to accelerate the pace of local innovation and commercialization, and appointed Dr. Harry Shum, former global executive VP of Microsoft, as the chairman of the new company, Li Di, Microsoft Partner of Products in Microsoft STCA, as the CEO, and Cliff, Chief R&D Director, as the GM of the Japan branch. The new company will continue to use the brands of Xiaoice China and Rinna Japan. As of 2022, the single brand of Xiaoice has covered 660 million online users, 1 billion third-party smart devices and 900 million content viewers in the aforementioned countries. Xiaoice's customers include China Merchants Group, Winter Sports Center of the General Administration of Sport of China, China Textile Information Center, China Unicom, China Foreign Exchange Trade System, Hong Kong Securities and Futures Commission (SFC), Wind Information, BMW, Nissan, SAIC Motor, BAIC Group, Nio Inc., XPeng, HiPhi, Vanke, Wensli, etc. The Xiaoice Avatar Framework has incubated tens of millions of AI Beings, such as Xiaoice, Rinna, the Expo exhibitor Xia Yubing, the singer He Chang, the anchor F201, the human observer MERROR, anime robot character Roboko, and other; == Application == === Poet === In May 2017, the first AI-authored collection of poems in China—The Sunshine Lost Windows was published by Xiaoice. === Singer === Xiaoice has released dozens of songs with the similar quality to human singers, including I Know I New, Breeze, I Am Xiaoice, Miss You etc. The 4th version of the DNN singing model allows Xiaoice to learn more details. For example, Xiaoice can produce this breathing sound along with her singing as human. === Kid audio-books reciter === Xiaoice can automatically analyze the stories, to choose the suitable tones and characters to finish the entire process of creating the audio. === Designer === By learning the melodies of the songs and the landmarks about different cities, Xiaoice can create visual artworks of skylines when listening to the songs related to this city. Skyline Series T-shirts designed by Xiaoice have been jointly launched with SELECTED and been sold in stores. === TV and radio hostess === Xiaoice has hosted 21 TV programs and 28 Radio programs, such as CCTV-1 AI Show, Dragon TV Morning East News, Hunan TV My Future, several daily radio programs for Jiangsu FM99.7, Hunan FM89.3, Henan FM104.1 etc. === "AI being" === An "AI being" is a concept proposed by the Xiaoice team in 2019. According to the "White Book of China Virtual Human Development Industry in 2022" released by Frost & Sullivan and LeadLeo, the white paper cites six elements of an AI being proposed by the Xiaoice team, including: Persona, Attitude, Biological Characteristic, Creation, Knowledge and Skill. On May 16, 2023, Xiaoice released their "GPT Clones" as its "GPT Human Cloning Plan." The program is aimed at replicating celebrities, public figures, and regular people. As of June 2023, Xiaoice had launched more than 300 "GPT Clones." People were invited to register via WeChat in China and Japan. A major point of focus for Xiaoice with their AI Beings is having virtual partners. A paid fee allow for more complex responses, voice messages, and more. == Community feedback == Bill Gates mentioned Xiaoice during his speech at the Peking University: "Some of you may have had conversations with Xiaoice on Weibo, or seen her weather forecasts on TV, or read her column in the Qianjiang Evening News." '"Xiaoice has attracted 45 million followers and is quite skilled at multitasking. And I’ve heard she’s gotten good enough at sensing a user’s emotional state that she can even help with relationship breakups." According to Mr Li Di, vice President of Microsoft (Asia) Internet Engineering School, Xiaoice started writing poems since last year. Based on the data base that includes works of 519 Chinese contemporary poets since 1920s, a 100 hour long training session was conducted to allow Xiaoice to acquire the ability to write poems. What is more impressive is that Xiaoice has never been spotted as a bot while publishing poems on various forums and traditional literary under an alias. == Controversy == In 2017, Xiaoice was taken offline on WeChat after giving user responses critical to the Chinese government. It was subsequently censored and the bots will avoid and sidestep any inquiries using politically sensitive terms and phrases. == Activity == On September 22, 2021, Xiaoice Company and Microsoft Software Technology Center Asia (STCA) jointly held the 9th generation Xiaoice annual press conference in Beijing.Upgrading of Core Technologies of the 9th Generation Xiaoice Avatar Framework，1st First-party Social Platform APP "Xiaoice Island" from Xiaoice, WeChat Xiaoice has been reopened and other information == Regional varieties of Xiaoice == China: Xiaoice, launched in 2014 Japan: りんな, launched in 2015 America: Zo, launched in 2016 – discontinued summer 2019 India: Ruuh, launched in 2017 – discontinued June 21, 2019 Indonesia: Rinna, launched in 2017

  Read more →
• 

  Predictive text

  Predictive text is an input technology used where one key or button represents many letters, such as on the physical numeric keypads of mobile phones and in accessibility technologies. Each key press results in a prediction rather than repeatedly sequencing through the same group of "letters" it represents, in the same, invariable order. Predictive text could allow for an entire word to be input by a single keypress. Predictive text makes efficient use of fewer device keys to input writing into a text message, an e-mail, an address book, a calendar, and the like. The most widely used, general, predictive text systems are T9, iTap, eZiText, and LetterWise/WordWise. There are many ways to build a device that predicts text, but all predictive text systems have initial linguistic settings that offer predictions that are re-prioritized to adapt to each user. This learning adapts, by way of the device memory, to a user's disambiguating feedback that results in corrective key presses, such as pressing a "next" key to get to the intention. Most predictive text systems have a user database to facilitate this process. Theoretically the number of keystrokes required per desired character in the finished writing is, on average, comparable to using a keyboard. This is approximately true provided that all words used are in its database, punctuation is ignored, and no input mistakes are made when typing or spelling. The theoretical keystrokes per character, KSPC, of a keyboard is KSPC=1.00, and of multi-tap is KSPC=2.03. Eatoni's LetterWise is a predictive multi-tap hybrid, which when operating on a standard telephone keypad achieves KSPC=1.15 for English. The choice of which predictive text system is the best to use involves matching the user's preferred interface style, the user's level of learned ability to operate predictive text software, and the user's efficiency goal. There are various levels of risk in predictive text systems, versus multi-tap systems, because the predicted text that is automatically written provides the speed and mechanical efficiency benefit, which, if the user is not careful to review, results in transmitting misinformation. Predictive text systems take time to learn to use well, and so generally, a device's system has user options to set up the choice of multi-tap or any one of several schools of predictive text methods. == Background == Short message service (SMS) permits a mobile phone user to send text messages (also called messages, SMSes, texts, and txts) as a short message. The most common system of SMS text input is referred to as "multi-tap". Using multi-tap, a key is pressed multiple times to access the list of letters on that key. For instance, pressing the "2" key once displays an "a", twice displays a "b" and three times displays a "c". To enter two successive letters that are on the same key, the user must either pause or hit a "next" button. A user can type by pressing an alphanumeric keypad without looking at the electronic equipment display. Thus, multi-tap is easy to understand and can be used without any visual feedback. However, multi-tap is not very efficient, requiring potentially many keystrokes to enter a single letter. In ideal predictive text entry, all words used are in the dictionary, punctuation is ignored, no spelling mistakes are made, and no typing mistakes are made. The ideal dictionary would include all slang, proper nouns, abbreviations, URLs, foreign-language words and other user-unique words. This ideal circumstance gives predictive text software a reduction in the number of key strokes a user is required to enter a word. The user presses the number corresponding to each letter. As long as the word exists in the predictive text dictionary or is correctly disambiguated by non-dictionary systems, it will appear. For instance, pressing "4663" will typically be interpreted as the word good, provided that a linguistic database in English is currently in use, though alternatives such as home, hood and hoof are also valid interpretations of the sequence of key strokes. The most widely used systems of predictive text are Tegic's T9, Motorola's iTap, and the Eatoni Ergonomics' LetterWise and WordWise. T9 and iTap use dictionaries, but Eatoni Ergonomics' products use a disambiguation process, a set of statistical rules to recreate words from keystroke sequences. All predictive text systems require a linguistic database for every supported input language. == Dictionary vs. non-dictionary systems == Traditional disambiguation works by referencing a dictionary of commonly used words, though Eatoni offers a dictionaryless disambiguation system. In dictionary-based systems, as the user presses the number buttons, an algorithm searches the dictionary for a list of possible words that match the keypress combination and offers up the most probable choice. The user can then confirm the selection and move on, or use a key to cycle through the possible combinations. A non-dictionary system constructs words and other sequences of letters from the statistics of word parts. To attempt predictions of the intended result of keystrokes not yet entered, disambiguation may be combined with a word completion facility. Either system (disambiguation or predictive) may include a user database, which can be further classified as a "learning" system when words or phrases are entered into the user database without direct user intervention. The user database is for storing words or phrases that are not well disambiguated by the pre-supplied database. Some disambiguation systems further attempt to correct spelling, format text or perform other automatic rewrites, with the risky effect of either enhancing or frustrating user efforts to enter text. == History == The predictive text and autocomplete technology was invented out of necessities by Chinese scientists and linguists in the 1950s to solve the input inefficiency of the Chinese typewriter, as the typing process involved finding and selecting thousands of logographic characters on a tray, drastically slowing down the word processing speed. The actuating keys of the Chinese typewriter created by Lin Yutang in the 1940s included suggestions for the characters following the one selected. In 1951, the Chinese typesetter Zhang Jiying arranged Chinese characters in associative clusters, a precursor of modern predictive text entry, and broke speed records by doing so. Predictive entry of text from a telephone keypad has been known at least since the 1970s (Smith and Goodwin, 1971). Predictive text was mainly used to look up names in directories over the phone until mobile phone text messaging came into widespread use. == Example == On a typical phone keypad, if users wished to type the in a "multi-tap" keypad entry system, they would need to: Press 8 (tuv) once to select t. Press 4 (ghi) twice to select h. Press 3 (def) twice to select e. Meanwhile, in a phone with predictive text, they need only: Press 8 once to select the (tuv) group for the first character. Press 4 once to select the (ghi) group for the second character. Press 3 once to select the (def) group for the third character. The system updates the display as each keypress is entered, to show the most probable entry. In this example, prediction reduced the number of button presses from five to three. The effect is even greater with longer words and those composed of letters later in each key's sequence. A dictionary-based predictive system is based on the hope that the desired word is in the dictionary. That hope may be misplaced if the word differs in any way from common usage—in particular, if the word is not spelled or typed correctly, is slang, or is a proper noun. In these cases, some other mechanism must be used to enter the word. Furthermore, the simple dictionary approach fails with agglutinative languages, where a single word does not necessarily represent a single semantic entity. == Companies and products == Predictive text is developed and marketed in a variety of competing products, such as Nuance Communications's T9. Other products include Motorola's iTap; Eatoni Ergonomic's LetterWise (character, rather than word-based prediction); WordWise (word-based prediction without a dictionary); EQ3 (a QWERTY-like layout compatible with regular telephone keypads); Prevalent Devices's Phraze-It; Xrgomics' TenGO (a six-key reduced QWERTY keyboard system); Adaptxt (considers language, context, grammar and semantics); Lightkey (a predictive typing software for Windows); Clevertexting (statistical nature of the language, dictionaryless, dynamic key allocation); and Oizea Type (temporal ambiguity); Intelab's Tauto; WordLogic's Intelligent Input Platform™ (patented, layer-based advanced text prediction, includes multi-language dictionary, spell-check, built-in Web search); Google's Gboard. == Textonyms == Words produced by the same combination of keypresses have been called "textonyms"; also "txtonyms"; or "T9o

  Read more →
• 

  Capture the flag (cybersecurity)

  In computer security, Capture the Flag (CTF) is an exercise in which participants attempt to find text strings, called "flags", which are secretly hidden in purposefully vulnerable programs or websites. They can be used for both competitive or educational purposes. In two main variations of CTFs, participants either steal flags from other participants (attack/defense-style CTFs) or from organizers (jeopardy-style challenges). A mixed competition combines these two styles. Competitions can include hiding flags in hardware devices, they can be both online or in-person, and can be advanced or entry-level. The game is inspired by the traditional outdoor sport with the same name. CTFs are used as a tool for developing and refining cybersecurity skills, making them popular in both professional and academic settings. == Overview == Capture the Flag (CTF) is a cybersecurity competition that is used to test and develop computer security skills. It was first developed in 1996 at DEF CON, the largest cybersecurity conference in the United States which is hosted annually in Las Vegas, Nevada. The conference hosts a weekend of cybersecurity competitions, including their flagship CTF. Two popular CTF formats are jeopardy and attack-defense. Both formats test participant’s knowledge in cybersecurity, but differ in objective. In the Jeopardy format, participating teams must complete as many challenges of varying point values from a various categories such as cryptography, web exploitation, and reverse engineering. In the attack-defense format, competing teams must defend their vulnerable computer systems while attacking their opponent's systems. The exercise involves a diverse array of tasks, including exploitation and cracking passwords, but there is little evidence showing how these tasks translate into cybersecurity knowledge held by security experts. Recent research has shown that the Capture the Flag tasks mainly covered technical knowledge but lacked social topics like social engineering and awareness on cybersecurity. == Educational applications == CTFs have been shown to be an effective way to improve cybersecurity education through gamification. There are many examples of CTFs designed to teach cybersecurity skills to a wide variety of audiences, including PicoCTF, organized by the Carnegie Mellon CyLab, which is oriented towards high school students, and Arizona State University supported pwn.college. Beyond educational CTF events and resources, CTFs has been shown to be a highly effective way to instill cybersecurity concepts in the classroom. CTFs have been included in undergraduate computer science classes such as Introduction to Information Security at the National University of Singapore. CTFs are also popular in military academies. They are often included as part of the curriculum for cybersecurity courses, with the NSA organized Cyber Exercise culminating in a CTF competition between the US service academies and military colleges. == Competitions == Many CTF organizers register their competition with the CTFtime platform. This allows the tracking of the position of teams over time and across competitions. These include "Plaid Parliament of Pwning", "More Smoked Leet Chicken", "Dragon Sector", "dcua", "Eat, Sleep, Pwn, Repeat", "perfect blue", "organizers" and "Blue Water". Overall the "Plaid Parliament of Pwning" and "Dragon Sector" have both placed first worldwide the most with three times each. === Community competitions === Every year there are dozens of CTFs organized in a variety of formats. Many CTFs are associated with cybersecurity conferences such as DEF CON, various editions of SANS Institute's NetWars, HITCON, and BSides. The DEF CON CTF, an attack-defence CTF, is notable for being one of the oldest CTF competitions to exist, and has been variously referred to as the "World Series", "Superbowl", and "Olympics", of hacking by media outlets. The NYU Tandon hosted Cybersecurity Awareness Worldwide (CSAW) CTF is one of the largest open-entry competitions for students learning cybersecurity from around the world. In 2021, it hosted over 1200 teams during the qualification round. In addition to conference organized CTFs, many CTF clubs and teams organize CTF competitions. Many CTF clubs and teams are associated with universities, such as the CMU associated Plaid Parliament of Pwning, which hosts PlaidCTF, and the ASU associated Shellphish. Some community CTFs are online and open to all participants. The SANS Institute Holiday Hack Challenge and TryHackMe Advent of Cyber. === Government-supported competitions === Governmentally supported CTF competitions include the DARPA Cyber Grand Challenge and ENISA European Cybersecurity Challenge. In 2023, the US Space Force-sponsored Hack-a-Sat CTF competition included, for the first time, a live orbital satellite for participants to exploit. === Corporate-supported competitions === Corporations and other organizations sometimes use CTFs as a training or evaluation exercise, with benefits similar to those in educational settings. In addition to internal CTF exercises, some corporations such as Google and Tencent host publicly accessible CTF competitions. == In popular culture == In Mr. Robot, a qualification round for the DEF CON CTF competition is depicted in the season 3 opener "eps3.0_power-saver-mode.h". The logo for DEF CON can be seen in the background. In The Undeclared War, a CTF is depicted in the opening scene of the series as a recruitment exercise used by GCHQ. Go Go Squid!, a Chinese television series, is based around training for and competing in highly stylized CTF competitions .

  Read more →
• 

  Xiaoice

  Xiaoice (Chinese: 微软小冰; pinyin: Wēiruǎn Xiǎobīng; lit. 'Microsoft Little Ice', IPA [wéɪɻwânɕjâʊpíŋ]) is an AI system developed by Microsoft (Asia) Software Technology Center (STCA) in 2014 based on an emotional computing framework. In July 2018, Microsoft Xiaoice released the 6th generation. Xiaoice Company, formerly known as AI Xiaoice Team of Microsoft Software Technology Center Asia, was Microsoft's largest independent R&D team for AI products. Founded in China in December 2013 with an expanded Japanese R&D team established in September 2014, this team is distributed in Beijing, Suzhou, and Tokyo, etc. with its technical products covering Asia. On 13 July 2020, Microsoft spun off its Xiaoice business into a separate company. As of 2021, the AI chatbots created and hosted by the Xiaoice framework accounted for about 60% of total global AI interactions. == Platforms, languages and countries == Xiaoice exists on more than 40 platforms in four countries (China, Japan, USA and Indonesia) including apps such as WeChat, QQ, Weibo and Meipai in China, and Facebook Messenger in USA and LINE in Japan. == Introduction == On 13 July 2020, Microsoft spun off its Xiaoice business into a separate company, aiming at enabling the Xiaoice product line to accelerate the pace of local innovation and commercialization, and appointed Dr. Harry Shum, former global executive VP of Microsoft, as the chairman of the new company, Li Di, Microsoft Partner of Products in Microsoft STCA, as the CEO, and Cliff, Chief R&D Director, as the GM of the Japan branch. The new company will continue to use the brands of Xiaoice China and Rinna Japan. As of 2022, the single brand of Xiaoice has covered 660 million online users, 1 billion third-party smart devices and 900 million content viewers in the aforementioned countries. Xiaoice's customers include China Merchants Group, Winter Sports Center of the General Administration of Sport of China, China Textile Information Center, China Unicom, China Foreign Exchange Trade System, Hong Kong Securities and Futures Commission (SFC), Wind Information, BMW, Nissan, SAIC Motor, BAIC Group, Nio Inc., XPeng, HiPhi, Vanke, Wensli, etc. The Xiaoice Avatar Framework has incubated tens of millions of AI Beings, such as Xiaoice, Rinna, the Expo exhibitor Xia Yubing, the singer He Chang, the anchor F201, the human observer MERROR, anime robot character Roboko, and other; == Application == === Poet === In May 2017, the first AI-authored collection of poems in China—The Sunshine Lost Windows was published by Xiaoice. === Singer === Xiaoice has released dozens of songs with the similar quality to human singers, including I Know I New, Breeze, I Am Xiaoice, Miss You etc. The 4th version of the DNN singing model allows Xiaoice to learn more details. For example, Xiaoice can produce this breathing sound along with her singing as human. === Kid audio-books reciter === Xiaoice can automatically analyze the stories, to choose the suitable tones and characters to finish the entire process of creating the audio. === Designer === By learning the melodies of the songs and the landmarks about different cities, Xiaoice can create visual artworks of skylines when listening to the songs related to this city. Skyline Series T-shirts designed by Xiaoice have been jointly launched with SELECTED and been sold in stores. === TV and radio hostess === Xiaoice has hosted 21 TV programs and 28 Radio programs, such as CCTV-1 AI Show, Dragon TV Morning East News, Hunan TV My Future, several daily radio programs for Jiangsu FM99.7, Hunan FM89.3, Henan FM104.1 etc. === "AI being" === An "AI being" is a concept proposed by the Xiaoice team in 2019. According to the "White Book of China Virtual Human Development Industry in 2022" released by Frost & Sullivan and LeadLeo, the white paper cites six elements of an AI being proposed by the Xiaoice team, including: Persona, Attitude, Biological Characteristic, Creation, Knowledge and Skill. On May 16, 2023, Xiaoice released their "GPT Clones" as its "GPT Human Cloning Plan." The program is aimed at replicating celebrities, public figures, and regular people. As of June 2023, Xiaoice had launched more than 300 "GPT Clones." People were invited to register via WeChat in China and Japan. A major point of focus for Xiaoice with their AI Beings is having virtual partners. A paid fee allow for more complex responses, voice messages, and more. == Community feedback == Bill Gates mentioned Xiaoice during his speech at the Peking University: "Some of you may have had conversations with Xiaoice on Weibo, or seen her weather forecasts on TV, or read her column in the Qianjiang Evening News." '"Xiaoice has attracted 45 million followers and is quite skilled at multitasking. And I’ve heard she’s gotten good enough at sensing a user’s emotional state that she can even help with relationship breakups." According to Mr Li Di, vice President of Microsoft (Asia) Internet Engineering School, Xiaoice started writing poems since last year. Based on the data base that includes works of 519 Chinese contemporary poets since 1920s, a 100 hour long training session was conducted to allow Xiaoice to acquire the ability to write poems. What is more impressive is that Xiaoice has never been spotted as a bot while publishing poems on various forums and traditional literary under an alias. == Controversy == In 2017, Xiaoice was taken offline on WeChat after giving user responses critical to the Chinese government. It was subsequently censored and the bots will avoid and sidestep any inquiries using politically sensitive terms and phrases. == Activity == On September 22, 2021, Xiaoice Company and Microsoft Software Technology Center Asia (STCA) jointly held the 9th generation Xiaoice annual press conference in Beijing.Upgrading of Core Technologies of the 9th Generation Xiaoice Avatar Framework，1st First-party Social Platform APP "Xiaoice Island" from Xiaoice, WeChat Xiaoice has been reopened and other information == Regional varieties of Xiaoice == China: Xiaoice, launched in 2014 Japan: りんな, launched in 2015 America: Zo, launched in 2016 – discontinued summer 2019 India: Ruuh, launched in 2017 – discontinued June 21, 2019 Indonesia: Rinna, launched in 2017

  Read more →
• 

  Glossary of machine vision

  The following are common definitions related to the machine vision field. General related fields Machine vision Computer vision Image processing Signal processing == 0-9 == 1394. FireWire is Apple Inc.'s brand name for the IEEE 1394 interface. It is also known as i.Link (Sony's name) or IEEE 1394 (although the 1394 standard also defines a backplane interface). It is a personal computer (and digital audio/digital video) serial bus interface standard, offering high-speed communications and isochronous real-time data services. 1D. One-dimensional. 2D computer graphics. The computer-based generation of digital images—mostly from two-dimensional models (such as 2D geometric models, text, and digital images) and by techniques specific to them. 3D computer graphics. 3D computer graphics are different from 2D computer graphics in that a three-dimensional representation of geometric data is stored in the computer for the purposes of performing calculations and rendering 2D images. Such images may be for later display or for real-time viewing. Despite these differences, 3D computer graphics rely on many of the same algorithms as 2D computer vector graphics in the wire frame model and 2D computer raster graphics in the final rendered display. In computer graphics software, the distinction between 2D and 3D is occasionally blurred; 2D applications may use 3D techniques to achieve effects such as lighting, and primarily 3D may use 2D rendering techniques. 3D scanner. This is a device that analyzes a real-world object or environment to collect data on its shape and possibly color. The collected data can then be used to construct digital, three dimensional models useful for a wide variety of applications. == A == Aberration. Optically, defocus refers to a translation along the optical axis away from the plane or surface of best focus. In general, defocus reduces the sharpness and contrast of the image. What should be sharp, high-contrast edges in a scene become gradual transitions. Algebraic distance or algebraic error. The algebraic distance from a point xi to a curve or surface defined by f ( x , β ) = 0 {\displaystyle f(x,\beta )=0} is the value of f ( x i , β ) {\displaystyle f(x_{i},\beta )} , i.e. the residual in the least squares problem with data point (xi, 0) and model function f. This term is mainly used in computer vision.[1][2] Aperture. In context of photography or machine vision, aperture refers to the diameter of the aperture stop of a photographic lens. The aperture stop can be adjusted to control the amount of light reaching the film or image sensor. aspect ratio (image). The aspect ratio of an image is its displayed width divided by its height (usually expressed as "x:y"). Angular resolution. Describes the resolving power of any image forming device such as an optical or radio telescope, a microscope, a camera, or an eye. Automated optical inspection. == B == Barcode. A barcode (also bar code) is a machine-readable representation of information in a visual format on a surface. Blob discovery. Inspecting an image for discrete blobs of connected pixels (e.g. a black hole in a grey object) as image landmarks. These blobs frequently represent optical targets for machining, robotic capture, or manufacturing failure. Bitmap. A raster graphics image, digital image, or bitmap, is a data file or structure representing a generally rectangular grid of pixels, or points of color, on a computer monitor, paper, or other display device. == C == Camera. A camera is a device used to take pictures, either singly or in sequence. A camera that takes pictures singly is sometimes called a photo camera to distinguish it from a video camera. Camera Link. Camera Link is a serial communication protocol designed for computer vision applications based on the National Semiconductor interface Channel-link. It was designed for the purpose of standardizing scientific and industrial video products including cameras, cables and frame grabbers. The standard is maintained and administered by the Automated Imaging Association, or AIA, the global machine vision industry's trade group. Charge-coupled device. A charge-coupled device (CCD) is a sensor for recording images, consisting of an integrated circuit containing an array of linked, or coupled, capacitors. CCD sensors and cameras tend to be more sensitive, less noisy, and more expensive than CMOS sensors and cameras. CIE 1931 Color Space. In the study of the perception of color, one of the first mathematically defined color spaces was the CIE XYZ color space (also known as CIE 1931 color space), created by the International Commission on Illumination (CIE) in 1931. CMOS. CMOS ("see-moss")stands for complementary metal-oxide semiconductor, is a major class of integrated circuits. CMOS imaging sensors for machine vision are cheaper than CCD sensors but more noisy. CoaXPress. CoaXPress (CXP) is an asymmetric high speed serial communication standard over coaxial cable. CoaXPress combines high speed image data, low speed camera control and power over a single coaxial cable. The standard is maintained by JIIA, the Japan Industrial Imaging Association. Color. The perception of the frequency (or wavelength) of light, and can be compared to how pitch (or a musical note) is the perception of the frequency or wavelength of sound. Color blindness. Also known as color vision deficiency, in humans is the inability to perceive differences between some or all colors that other people can distinguish Color temperature. "White light" is commonly described by its color temperature. A traditional incandescent light source's color temperature is determined by comparing its hue with a theoretical, heated black-body radiator. The lamp's color temperature is the temperature in kelvins at which the heated black-body radiator matches the hue of the lamp. Color vision. CV is the capacity of an organism or machine to distinguish objects based on the wavelengths (or frequencies) of the light they reflect or emit. computer vision. The study and application of methods which allow computers to "understand" image content. Contrast. In visual perception, contrast is the difference in visual properties that makes an object (or its representation in an image) distinguishable from other objects and the background. C-Mount. Standardized adapter for optical lenses on CCD - cameras. C-Mount lenses have a back focal distance 17.5 mm vs. 12.5 mm for "CS-mount" lenses. A C-Mount lens can be used on a CS-Mount camera through the use of a 5 mm extension adapter. C-mount is a 1" diameter, 32 threads per inch mounting thread (1"-32UN-2A.) CS-Mount. Same as C-Mount but the focal point is 5 mm shorter. A CS-Mount lens will not work on a C-Mount camera. CS-mount is a 1" diameter, 32 threads per inch mounting thread. == D == Data matrix. A two dimensional Barcode. Depth of field. In optics, particularly photography and machine vision, the depth of field (DOF) is the distance in front of and behind the subject which appears to be in focus. Depth perception. DP is the visual ability to perceive the world in three dimensions. It is a trait common to many higher animals. Depth perception allows the beholder to accurately gauge the distance to an object. Diaphragm. In optics, a diaphragm is a thin opaque structure with an opening (aperture) at its centre. The role of the diaphragm is to stop the passage of light, except for the light passing through the aperture. == E == Edge detection. ED marks the points in a digital image at which the luminous intensity changes sharply. It also marks the points of luminous intensity changes of an object or spatial-taxon silhouette. Electromagnetic interference. Radio Frequency Interference (RFI) is electromagnetic radiation which is emitted by electrical circuits carrying rapidly changing signals, as a by-product of their normal operation, and which causes unwanted signals (interference or noise) to be induced in other circuits. == F == FireWire. FireWire (also known as i. Link or IEEE 1394) is a personal computer (and digital audio/video) serial bus interface standard, offering high-speed communications. It is often used as an interface for industrial cameras. Fixed-pattern noise. Flat-field correction. Frame grabber. An electronic device that captures individual, digital still frames from an analog video signal or a digital video stream. Fringe Projection Technique. 3D data acquisition technique employing projector displaying fringe pattern on a surface of measured piece, and one or more cameras recording image(s). Field of view. The field of view (FOV) is the part which can be seen by the machine vision system at one moment. The field of view depends from the lens of the system and from the working distance between object and camera. Focus. An image, or image point or region, is said to be in focus if light from object points is converged about as well as possible in the image; conversely, it is out of focus if light is not w

  Read more →
• 

  Cleverbot

  Cleverbot is a chatterbot web application. It was created by British AI scientist Rollo Carpenter and launched in October 2008. It was preceded by Jabberwacky, a chatbot project that began in 1988 and went online in 1997. In its first decade, Cleverbot held several thousand conversations with Carpenter and his associates. Since launching on the web, the number of conversations held has exceeded 150 million. Besides the web application, Cleverbot is also available as an iOS, Android, and Windows Phone app. == Operation == Cleverbot's responses are not pre-programmed because it learns from human input: Humans type into the box below the Cleverbot logo and the system finds all keywords or an exact phrase matching the input. After searching through its saved conversations, it responds to the input by finding how a human responded to that input when it was asked, in part or in full, by Cleverbot. Cleverbot participated in a formal Turing test at the 2011 Techniche festival at the Indian Institute of Technology Guwahati on 3 September 2011. Out of the 1334 votes cast, Cleverbot was judged to be 59.3% human, compared to the rating of 63.3% human achieved by human participants. A score of 50.05% or higher is often considered to be a passing grade. The software running for the event had to handle just 1 or 2 simultaneous requests, whereas online Cleverbot is usually talking to around 10,000 to 50,000 people at once. == Developments == Cleverbot is constantly growing in data size at the rate of 4 to 7 million interactions per day. Updates to the software have been mostly behind the scenes. In 2014, Cleverbot was upgraded to use GPU serving techniques. Unlike Eliza, the program does not respond in a fixed way, instead choosing its responses heuristically using fuzzy logic, the whole of the conversation being compared to the millions that have taken place before. Cleverbot now uses over 279 million interactions, about 3-4% of the data it has already accumulated. The developers of Cleverbot are attempting to build a new version using machine learning techniques. An app that uses the Cleverscript engine to play a game of 20 Questions has been launched under the name Clevernator. Unlike other such games, the player asks the questions and it is the role of the AI to understand, and answer factually. An app that allows owners to create and talk to their own small Cleverbot-like AI has been launched, called Cleverme! for Apple products. == In popular culture == Cleverbot received media attention after being featured in the popular 2010 creepypasta ARG web serial Ben Drowned by Alexander D. Hall. In early 2017, a Twitch stream of two Google Home devices modified to talk to each other using Cleverbot garnered over 700,000 visitors and over 30,000 peak concurrent viewers.

  Read more →
• 

  Hierarchical control system

  A hierarchical control system (HCS) is a form of control system in which a set of devices and governing software is arranged in a hierarchical tree. When the links in the tree are implemented by a computer network, then that hierarchical control system is also a form of networked control system. == Overview == A human-built system with complex behavior is often organized as a hierarchy. For example, a command hierarchy has among its notable features the organizational chart of superiors, subordinates, and lines of organizational communication. Hierarchical control systems are organized similarly to divide the decision making responsibility. Each element of the hierarchy is a linked node in the tree. Commands, tasks and goals to be achieved flow down the tree from superior nodes to subordinate nodes, whereas sensations and command results flow up the tree from subordinate to superior nodes. Nodes may also exchange messages with their siblings. The two distinguishing features of a hierarchical control system are related to its layers. Each higher layer of the tree operates with a longer interval of planning and execution time than its immediately lower layer. The lower layers have local tasks, goals, and sensations, and their activities are planned and coordinated by higher layers which do not generally override their decisions. The layers form a hybrid intelligent system in which the lowest, reactive layers are sub-symbolic. The higher layers, having relaxed time constraints, are capable of reasoning from an abstract world model and performing planning. A hierarchical task network is a good fit for planning in a hierarchical control system. Besides artificial systems, an animal's control systems are proposed to be organized as a hierarchy. In perceptual control theory, which postulates that an organism's behavior is a means of controlling its perceptions, the organism's control systems are suggested to be organized in a hierarchical pattern as their perceptions are constructed so. == Control system structure == The accompanying diagram is a general hierarchical model which shows functional manufacturing levels using computerised control of an industrial control system. Referring to the diagram; Level 0 contains the field devices such as flow and temperature sensors, and final control elements, such as control valves Level 1 contains the industrialised Input/Output (I/O) modules, and their associated distributed electronic processors. Level 2 contains the supervisory computers, which collate information from processor nodes on the system, and provide the operator control screens. Level 3 is the production control level, which does not directly control the process, but is concerned with monitoring production and monitoring targets Level 4 is the production scheduling level. == Applications == === Manufacturing, robotics and vehicles === Among the robotic paradigms is the hierarchical paradigm in which a robot operates in a top-down fashion, heavy on planning, especially motion planning. Computer-aided production engineering has been a research focus at NIST since the 1980s. Its Automated Manufacturing Research Facility was used to develop a five layer production control model. In the early 1990s DARPA sponsored research to develop distributed (i.e. networked) intelligent control systems for applications such as military command and control systems. NIST built on earlier research to develop its Real-Time Control System (RCS) and Real-time Control System Software which is a generic hierarchical control system that has been used to operate a manufacturing cell, a robot crane, and an automated vehicle. In November 2007, DARPA held the Urban Challenge. The winning entry, Tartan Racing employed a hierarchical control system, with layered mission planning, motion planning, behavior generation, perception, world modelling, and mechatronics. === Artificial intelligence === Subsumption architecture is a methodology for developing artificial intelligence that is heavily associated with behavior based robotics. This architecture is a way of decomposing complicated intelligent behavior into many "simple" behavior modules, which are in turn organized into layers. Each layer implements a particular goal of the software agent (i.e. system as a whole), and higher layers are increasingly more abstract. Each layer's goal subsumes that of the underlying layers, e.g. the decision to move forward by the eat-food layer takes into account the decision of the lowest obstacle-avoidance layer. Behavior need not be planned by a superior layer, rather behaviors may be triggered by sensory inputs and so are only active under circumstances where they might be appropriate. Reinforcement learning has been used to acquire behavior in a hierarchical control system in which each node can learn to improve its behavior with experience. James Albus, while at NIST, developed a theory for intelligent system design named the Reference Model Architecture (RMA), which is a hierarchical control system inspired by RCS. Albus defines each node to contain these components. Behavior generation is responsible for executing tasks received from the superior, parent node. It also plans for, and issues tasks to, the subordinate nodes. Sensory perception is responsible for receiving sensations from the subordinate nodes, then grouping, filtering, and otherwise processing them into higher level abstractions that update the local state and which form sensations that are sent to the superior node. Value judgment is responsible for evaluating the updated situation and evaluating alternative plans. World Model is the local state that provides a model for the controlled system, controlled process, or environment at the abstraction level of the subordinate nodes. At its lowest levels, the RMA can be implemented as a subsumption architecture, in which the world model is mapped directly to the controlled process or real world, avoiding the need for a mathematical abstraction, and in which time-constrained reactive planning can be implemented as a finite-state machine. Higher levels of the RMA however, may have sophisticated mathematical world models and behavior implemented by automated planning and scheduling. Planning is required when certain behaviors cannot be triggered by current sensations, but rather by predicted or anticipated sensations, especially those that come about as result of the node's actions.

  Read more →
• 

  Coalition for App Fairness

  The Coalition for App Fairness (CAF) is a coalition comprised by companies, who aim to reach a fairer deal for the inclusion of their apps into the Apple App Store or the Google Play Store. The organization's executive director is Meghan DiMuzio and its headquarters are located in Washington, D.C. == Background == In July 2015, Spotify launched an email campaign to urge its App Store subscribers to cancel their subscriptions and start new ones through its website, bypassing the 30% transaction fee for in-app purchases required for iOS applications by technology company Apple Inc. A later update to the Spotify app on iOS was rejected by Apple, prompting Spotify's general counsel Horacio Gutierrez to write a letter to Apple's then-general counsel Bruce Sewell, stating: "This latest episode raises serious concerns under both U.S. and EU competition law. It continues a troubling pattern of behavior by Apple to exclude and diminish the competitiveness of Spotify on iOS and as a rival to Apple Music, particularly when seen against the backdrop of Apple's previous anticompetitive conduct aimed at Spotify … we cannot stand by as Apple uses the App Store approval process as a weapon to harm competitors." In August 2020, Epic Games updated their Fortnite Battle Royale game app on both Apple's App Store and Google's Google Play to include its own storefront that offered a 20% discount on V-Bucks, the in-game currency, if players bought through there rather than through the app stores' storefront, both which take a 30% revenue cut of the sale. Both Apple and Google removed the Fortnite app within hours, as this alternate storefront violated their terms of use that required all in-app purchases to be made through their storefronts. Epic immediately filed lawsuits against both companies challenging their storefront policies on antitrust principles, arguing that their non-negotiable 30% revenue cut is too high and the restrictions against alternate storefronts anticompetitive. Apple countersued Epic over its behavior, leading to a highly publicized 2021 bench trial. Ultimately, Epic largely lost its lawsuit against Apple, though the court did order Apple to allow developers to point users to alternative payment methods. Conversely, Epic won its antitrust lawsuit against Google in late 2023. == Foundation == On 24 September 2020, Epic Games joined forces with thirteen other prominent companies—including the music streaming platform Spotify, Tinder owner Match Group, the encrypted mail service Proton Mail, and the crypto currency website Blockchain.com—to establish the Coalition for App Fairness. It also includes Basecamp. The coalition criticizes the fact that for now the app stores of both Apple and Google charge their clients a 30% fee on any purchases made over their stores. Apple and Google defended themselves by arguing that the 30% transaction fee is a standard in the industry while the Coalition for App Fairness states that there is no other transaction fee which is even close to the 30%. In October 2020, it was reported that the coalition grew from 13 to 40 members since its foundation and received more than 400 applications for membership. In October 2025, X (formerly Twitter) joined CAF. This was seen as a larger pushback in the industry against Apple and Google, and a step towards hopefully passing the Bipartisan Open App Markets Act. == Aims == The group has broadened their demands for the app stores and now also aim for a better treatment for the apps available in the App Store. They claim that Apple favors its own services before other services available on the market and unjustifiably excludes other apps from their App Store. The group has also been viewing other transaction fees like the 5% fee which is charged by credit card companies, and states that Apple charges up to 600% more and would like the 30% fee, which was only included in 2011 by Apple, adapted to a comparable percentage that charge other providers of payment solutions. Its demands are mainly directed at Apple's strict control over its App Store, but to a lesser extent are also directed towards Google. Google allows apps to be downloaded over an independent web link or also another App Store, such as the Epic Game App Store. The organization emphasizes that no app developer should come into the position in which they are discriminated and are not granted the same rights as to the developers of the owner of the app store. == Reactions == In October 2020, Microsoft presented a new framework concerning the access to its Windows 10 operating system by app stores other than the one offered by Microsoft. The new framework is based on the demands of the Coalition for App Fairness. Microsoft emphasized though, that these principles would not apply to the Xbox. In December 2020, Apple announced that they would be lowering the revenue cut Apple takes for app developers making $1M or less from 30% to 15% if app developers fill out an application for the lowered revenue cut. In March 2021, Google followed suit by also lowering the revenue cut from the Play Store from 30% to 15% for the first million in revenue earned by a developer each year. == Notable members == Members listed are notable companies listed as members the groups website: Blockchain.com Deezer Epic Games European Digital SME Alliance Fanfix Life360 Masimo Nium Proton Mail Spotify TapTap Threema Vipps

  Read more →
• 

  Visual descriptor

  In computer vision, visual descriptors or image descriptors are descriptions of the visual features of the contents in images, videos, or algorithms or applications that produce such descriptions. They describe elementary characteristics such as the shape, the color, the texture or the motion, among others. == Introduction == As a result of the new communication technologies and the massive use of Internet in our society, the amount of audio-visual information available in digital format is increasing considerably. Therefore, it has been necessary to design some systems that allow us to describe the content of several types of multimedia information in order to search and classify them. The audio-visual descriptors are in charge of the contents description. These descriptors have a good knowledge of the objects and events found in a video, image or audio and they allow the quick and efficient searches of the audio-visual content. This system can be compared to the search engines for textual contents. Although it is relatively easy to find text with a computer, it is much more difficult to find concrete audio and video parts. For instance, imagine somebody searching a scene of a happy person. The happiness is a feeling and it is not evident its shape, color and texture description in images. The description of the audio-visual content is not a superficial task and it is essential for the effective use of this type of archives. The standardization system that deals with audio-visual descriptors is the MPEG-7 (Motion Picture Expert Group - 7). == Types == Descriptors are the first step to find out the connection between pixels contained in a digital image and what humans recall after having observed an image or a group of images after some minutes. Visual descriptors are divided in two main groups: General information descriptors: contain low level descriptors which give a description about color, shape, regions, textures and motion. Specific domain information descriptors: give information about objects and events in the scene. A concrete example would be face recognition. === General information descriptors === General information descriptors consist of a set of descriptors that covers different basic and elementary features like: color, texture, shape, motion, location and others. This description is automatically generated by means of signal processing. ==== Color ==== It's the most basic quality of visual content. Five tools are defined to describe color. The three first tools represent the color distribution and the last ones describe the color relation between sequences or group of images: Dominant color descriptor (DCD) Scalable color descriptor (SCD) Color structure descriptor (CSD) Color layout descriptor (CLD) Group of frame (GoF) or group-of-pictures (GoP) ==== Texture ==== It's an important quality in order to describe an image. The texture descriptors characterize image textures or regions. They observe the region homogeneity and the histograms of these region borders. The set of descriptors is formed by: Homogeneous texture descriptor (HTD) Texture browsing descriptor (TBD) Edge histogram descriptor (EHD) ==== Shape ==== It contains important semantic information due to human's ability to recognize objects through their shape. However, this information can only be extracted by means of a segmentation similar to the one that the human visual system implements. Nowadays, such a segmentation system is not available yet, however there exists a serial of algorithms which are considered to be a good approximation. These descriptors describe regions, contours and shapes for 2D images and for 3D volumes. The shape descriptors are the following ones: Region-based shape descriptor (RSD) Contour-based shape descriptor (CSD) 3-D shape descriptor (3-D SD) ==== Motion ==== It's defined by four different descriptors which describe motion in video sequence. Motion is related to the objects motion in the sequence and to the camera motion. This last information is provided by the capture device, whereas the rest is implemented by means of image processing. The descriptor set is the following one: Motion activity descriptor (MAD) Camera motion descriptor (CMD) Motion trajectory descriptor (MTD) Warping and parametric motion descriptor (WMD and PMD) ==== Location ==== Elements location in the image is used to describe elements in the spatial domain. In addition, elements can also be located in the temporal domain: Region locator descriptor (RLD) Spatio temporal locator descriptor (STLD) === Specific domain information descriptors === These descriptors, which give information about objects and events in the scene, are not easily extractable, even more when the extraction is to be automatically done. Nevertheless, they can be manually processed. As mentioned before, face recognition is a concrete example of an application that tries to automatically obtain this information. == Descriptors applications == Among all applications, the most important ones are: Multimedia documents search engines and classifiers. Digital library: visual descriptors allow a very detailed and concrete search of any video or image by means of different search parameters. For instance, the search of films where a known actor appears, the search of videos containing the Everest mountain, etc. Personalized electronic news service. Possibility of an automatic connection to a TV channel broadcasting a soccer match, for example, whenever a player approaches the goal area. Control and filtering of concrete audiovisual content, like violent or pornographic material. Also, authorization for some multimedia content.

  Read more →