Predictive text

Predictive text is an input technology used where one key or button represents many letters, such as on the physical numeric keypads of mobile phones and in accessibility technologies. Each key press results in a prediction rather than repeatedly sequencing through the same group of "letters" it represents, in the same, invariable order. Predictive text could allow for an entire word to be input by a single keypress. Predictive text makes efficient use of fewer device keys to input writing into a text message, an e-mail, an address book, a calendar, and the like. The most widely used, general, predictive text systems are T9, iTap, eZiText, and LetterWise/WordWise. There are many ways to build a device that predicts text, but all predictive text systems have initial linguistic settings that offer predictions that are re-prioritized to adapt to each user. This learning adapts, by way of the device memory, to a user's disambiguating feedback that results in corrective key presses, such as pressing a "next" key to get to the intention. Most predictive text systems have a user database to facilitate this process. Theoretically the number of keystrokes required per desired character in the finished writing is, on average, comparable to using a keyboard. This is approximately true provided that all words used are in its database, punctuation is ignored, and no input mistakes are made when typing or spelling. The theoretical keystrokes per character, KSPC, of a keyboard is KSPC=1.00, and of multi-tap is KSPC=2.03. Eatoni's LetterWise is a predictive multi-tap hybrid, which when operating on a standard telephone keypad achieves KSPC=1.15 for English. The choice of which predictive text system is the best to use involves matching the user's preferred interface style, the user's level of learned ability to operate predictive text software, and the user's efficiency goal. There are various levels of risk in predictive text systems, versus multi-tap systems, because the predicted text that is automatically written provides the speed and mechanical efficiency benefit, which, if the user is not careful to review, results in transmitting misinformation. Predictive text systems take time to learn to use well, and so generally, a device's system has user options to set up the choice of multi-tap or any one of several schools of predictive text methods. == Background == Short message service (SMS) permits a mobile phone user to send text messages (also called messages, SMSes, texts, and txts) as a short message. The most common system of SMS text input is referred to as "multi-tap". Using multi-tap, a key is pressed multiple times to access the list of letters on that key. For instance, pressing the "2" key once displays an "a", twice displays a "b" and three times displays a "c". To enter two successive letters that are on the same key, the user must either pause or hit a "next" button. A user can type by pressing an alphanumeric keypad without looking at the electronic equipment display. Thus, multi-tap is easy to understand and can be used without any visual feedback. However, multi-tap is not very efficient, requiring potentially many keystrokes to enter a single letter. In ideal predictive text entry, all words used are in the dictionary, punctuation is ignored, no spelling mistakes are made, and no typing mistakes are made. The ideal dictionary would include all slang, proper nouns, abbreviations, URLs, foreign-language words and other user-unique words. This ideal circumstance gives predictive text software a reduction in the number of key strokes a user is required to enter a word. The user presses the number corresponding to each letter. As long as the word exists in the predictive text dictionary or is correctly disambiguated by non-dictionary systems, it will appear. For instance, pressing "4663" will typically be interpreted as the word good, provided that a linguistic database in English is currently in use, though alternatives such as home, hood and hoof are also valid interpretations of the sequence of key strokes. The most widely used systems of predictive text are Tegic's T9, Motorola's iTap, and the Eatoni Ergonomics' LetterWise and WordWise. T9 and iTap use dictionaries, but Eatoni Ergonomics' products use a disambiguation process, a set of statistical rules to recreate words from keystroke sequences. All predictive text systems require a linguistic database for every supported input language. == Dictionary vs. non-dictionary systems == Traditional disambiguation works by referencing a dictionary of commonly used words, though Eatoni offers a dictionaryless disambiguation system. In dictionary-based systems, as the user presses the number buttons, an algorithm searches the dictionary for a list of possible words that match the keypress combination and offers up the most probable choice. The user can then confirm the selection and move on, or use a key to cycle through the possible combinations. A non-dictionary system constructs words and other sequences of letters from the statistics of word parts. To attempt predictions of the intended result of keystrokes not yet entered, disambiguation may be combined with a word completion facility. Either system (disambiguation or predictive) may include a user database, which can be further classified as a "learning" system when words or phrases are entered into the user database without direct user intervention. The user database is for storing words or phrases that are not well disambiguated by the pre-supplied database. Some disambiguation systems further attempt to correct spelling, format text or perform other automatic rewrites, with the risky effect of either enhancing or frustrating user efforts to enter text. == History == The predictive text and autocomplete technology was invented out of necessities by Chinese scientists and linguists in the 1950s to solve the input inefficiency of the Chinese typewriter, as the typing process involved finding and selecting thousands of logographic characters on a tray, drastically slowing down the word processing speed. The actuating keys of the Chinese typewriter created by Lin Yutang in the 1940s included suggestions for the characters following the one selected. In 1951, the Chinese typesetter Zhang Jiying arranged Chinese characters in associative clusters, a precursor of modern predictive text entry, and broke speed records by doing so. Predictive entry of text from a telephone keypad has been known at least since the 1970s (Smith and Goodwin, 1971). Predictive text was mainly used to look up names in directories over the phone until mobile phone text messaging came into widespread use. == Example == On a typical phone keypad, if users wished to type the in a "multi-tap" keypad entry system, they would need to: Press 8 (tuv) once to select t. Press 4 (ghi) twice to select h. Press 3 (def) twice to select e. Meanwhile, in a phone with predictive text, they need only: Press 8 once to select the (tuv) group for the first character. Press 4 once to select the (ghi) group for the second character. Press 3 once to select the (def) group for the third character. The system updates the display as each keypress is entered, to show the most probable entry. In this example, prediction reduced the number of button presses from five to three. The effect is even greater with longer words and those composed of letters later in each key's sequence. A dictionary-based predictive system is based on the hope that the desired word is in the dictionary. That hope may be misplaced if the word differs in any way from common usage—in particular, if the word is not spelled or typed correctly, is slang, or is a proper noun. In these cases, some other mechanism must be used to enter the word. Furthermore, the simple dictionary approach fails with agglutinative languages, where a single word does not necessarily represent a single semantic entity. == Companies and products == Predictive text is developed and marketed in a variety of competing products, such as Nuance Communications's T9. Other products include Motorola's iTap; Eatoni Ergonomic's LetterWise (character, rather than word-based prediction); WordWise (word-based prediction without a dictionary); EQ3 (a QWERTY-like layout compatible with regular telephone keypads); Prevalent Devices's Phraze-It; Xrgomics' TenGO (a six-key reduced QWERTY keyboard system); Adaptxt (considers language, context, grammar and semantics); Lightkey (a predictive typing software for Windows); Clevertexting (statistical nature of the language, dictionaryless, dynamic key allocation); and Oizea Type (temporal ambiguity); Intelab's Tauto; WordLogic's Intelligent Input Platform™ (patented, layer-based advanced text prediction, includes multi-language dictionary, spell-check, built-in Web search); Google's Gboard. == Textonyms == Words produced by the same combination of keypresses have been called "textonyms"; also "txtonyms"; or "T9o

Random feature

Random features (RF) are a technique used in machine learning to approximate kernel methods, introduced by Ali Rahimi and Ben Recht in their 2007 paper "Random Features for Large-Scale Kernel Machines", and extended by. RF uses a Monte Carlo approximation to kernel functions by randomly sampled feature maps. It is used for datasets that are too large for traditional kernel methods like support vector machine, kernel ridge regression, and gaussian process. == Mathematics == === Kernel method === Given a feature map ϕ : R d → V {\textstyle \phi :\mathbb {R} ^{d}\to V} , where V {\textstyle V} is a Hilbert space (more specifically, a reproducing kernel Hilbert space), the kernel trick replaces inner products in feature space ⟨ ϕ ( x i ) , ϕ ( x j ) ⟩ V {\displaystyle \langle \phi (x_{i}),\phi (x_{j})\rangle _{V}} by a kernel function k ( x i , x j ) : R d × R d → R {\displaystyle k(x_{i},x_{j}):\mathbb {R} ^{d}\times \mathbb {R} ^{d}\to \mathbb {R} } Kernel methods replaces linear operations in high-dimensional space by operations on the kernel matrix: K X := [ k ( x i , x j ) ] i , j ∈ 1 : N {\displaystyle K_{X}:=[k(x_{i},x_{j})]_{i,j\in 1:N}} where N {\textstyle N} is the number of data points. === Random kernel method === The problem with kernel methods is that the kernel matrix K X {\textstyle K_{X}} has size N × N {\textstyle N\times N} . This becomes computationally infeasible when N {\textstyle N} reaches the order of a million. The random kernel method replaces the kernel function k {\textstyle k} by an inner product in low-dimensional feature space R D {\textstyle \mathbb {R} ^{D}} : k ( x , y ) ≈ ⟨ z ( x ) , z ( y ) ⟩ {\displaystyle k(x,y)\approx \langle z(x),z(y)\rangle } where z {\textstyle z} is a randomly sampled feature map z : R d → R D {\textstyle z:\mathbb {R} ^{d}\to \mathbb {R} ^{D}} . This converts kernel linear regression into linear regression in feature space, kernel SVM into SVM in feature space, etc. Since we have K X ≈ Z X T Z X {\displaystyle K_{X}\approx Z_{X}^{T}Z_{X}} where Z X = [ z ( x 1 ) , … , z ( x N ) ] {\displaystyle Z_{X}=[z(x_{1}),\dots ,z(x_{N})]} , these methods no longer involve matrices of size O ( N 2 ) {\textstyle O(N^{2})} , but only random feature matrices of size O ( D N ) {\textstyle O(DN)} . == Random Fourier feature == === Radial basis function kernel === The radial basis function (RBF) kernel on two samples x i , x j ∈ R d {\displaystyle x_{i},x_{j}\in \mathbb {R} ^{d}} is defined as k ( x i , x j ) = exp ⁡ ( − ‖ x i − x j ‖ 2 2 σ 2 ) {\displaystyle k(x_{i},x_{j})=\exp \left(-{\frac {\|x_{i}-x_{j}\|^{2}}{2\sigma ^{2}}}\right)} where ‖ x i − x j ‖ 2 {\displaystyle \|x_{i}-x_{j}\|^{2}} is the squared Euclidean distance and σ {\displaystyle \sigma } is a free parameter defining the shape of the kernel. It can be approximated by a random Fourier feature map z : R d → R 2 D {\displaystyle z:\mathbb {R} ^{d}\to \mathbb {R} ^{2D}} : z ( x ) := 1 D [ cos ⁡ ⟨ ω 1 , x ⟩ , sin ⁡ ⟨ ω 1 , x ⟩ , … , cos ⁡ ⟨ ω D , x ⟩ , sin ⁡ ⟨ ω D , x ⟩ ] T {\displaystyle z(x):={\frac {1}{\sqrt {D}}}[\cos \langle \omega _{1},x\rangle ,\sin \langle \omega _{1},x\rangle ,\ldots ,\cos \langle \omega _{D},x\rangle ,\sin \langle \omega _{D},x\rangle ]^{T}} where ω 1 , . . . , ω D {\displaystyle \omega _{1},...,\omega _{D}} are IID samples from the multidimensional normal distribution N ( 0 , σ − 2 I ) {\displaystyle N(0,\sigma ^{-2}I)} . Since cos , sin {\displaystyle \cos ,\sin } are bounded, there is a stronger convergence guarantee by Hoeffding's inequality. === Random Fourier features === By Bochner's theorem, the above construction can be generalized to arbitrary positive definite shift-invariant kernel k ( x , y ) = k ( x − y ) {\displaystyle k(x,y)=k(x-y)} . Define its Fourier transform p ( ω ) = 1 2 π ∫ R d e − j ⟨ ω , Δ ⟩ k ( Δ ) d Δ {\displaystyle p(\omega )={\frac {1}{2\pi }}\int _{\mathbb {R} ^{d}}e^{-j\langle \omega ,\Delta \rangle }k(\Delta )d\Delta } then ω 1 , . . . , ω D {\displaystyle \omega _{1},...,\omega _{D}} are sampled IID from the probability distribution with probability density p {\displaystyle p} . This applies for other kernels like the Laplace kernel and the Cauchy kernel. === Neural network interpretation === Given a random Fourier feature map z {\displaystyle z} , training the feature on a dataset by featurized linear regression is equivalent to fitting complex parameters θ 1 , … , θ D ∈ C {\displaystyle \theta _{1},\dots ,\theta _{D}\in \mathbb {C} } such that f θ ( x ) = R e ( ∑ k θ k e i ⟨ ω k , x ⟩ ) {\displaystyle f_{\theta }(x)=\mathrm {Re} \left(\sum _{k}\theta _{k}e^{i\langle \omega _{k},x\rangle }\right)} which is a neural network with a single hidden layer, with activation function t ↦ e i t {\displaystyle t\mapsto e^{it}} , zero bias, and the parameters in the first layer frozen. In the overparameterized case, when 2 D ≥ N {\displaystyle 2D\geq N} , the network linearly interpolates the dataset { ( x i , y i ) } i ∈ 1 : N {\displaystyle \{(x_{i},y_{i})\}_{i\in 1:N}} , and the network parameters is the least-norm solution: θ ^ = arg ⁡ min θ ∈ C D , f θ ( x k ) = y k ∀ k ∈ 1 : N ‖ θ ‖ {\displaystyle {\hat {\theta }}=\arg \min _{\theta \in \mathbb {C} ^{D},f_{\theta }(x_{k})=y_{k}\forall k\in 1:N}\|\theta \|} At the limit of D → ∞ {\displaystyle D\to \infty } , the L2 norm ‖ θ ^ ‖ → ‖ f K ‖ H {\displaystyle \|{\hat {\theta }}\|\to \|f_{K}\|_{H}} where f K {\displaystyle f_{K}} is the interpolating function obtained by the kernel regression with the original kernel, and ‖ ⋅ ‖ H {\displaystyle \|\cdot \|_{H}} is the norm in the reproducing kernel Hilbert space for the kernel. == Other examples == === Random binning features === A random binning features map partitions the input space using randomly shifted grids at randomly chosen resolutions and assigns to an input point a binary bit string that corresponds to the bins in which it falls. The grids are constructed so that the probability that two points x i , x j ∈ R d {\displaystyle x_{i},x_{j}\in \mathbb {R} ^{d}} are assigned to the same bin is proportional to K ( x i , x j ) {\displaystyle K(x_{i},x_{j})} . The inner product between a pair of transformed points is proportional to the number of times the two points are binned together, and is therefore an unbiased estimate of K ( x i , x j ) {\displaystyle K(x_{i},x_{j})} . Since this mapping is not smooth and uses the proximity between input points, Random Binning Features works well for approximating kernels that depend only on the L 1 {\displaystyle L_{1}} distance between datapoints. === Orthogonal random features === Orthogonal random features uses a random orthogonal matrix instead of a random Fourier matrix. == Historical context == In NIPS 2006, deep learning had just become competitive with linear models like PCA and linear SVMs for large datasets, and people speculated about whether it could compete with kernel SVMs. However, there was no way to train kernel SVM on large datasets. The two authors developed the random feature method to train those. It was then found that the O ( 1 / D ) {\displaystyle O(1/D)} variance bound did not match practice: the variance bound predicts that approximation to within 0.01 {\displaystyle 0.01} requires D ∼ 10 4 {\displaystyle D\sim 10^{4}} , but in practice required only ∼ 10 2 {\displaystyle \sim 10^{2}} . Attempting to discover what caused this led to the subsequent two papers.

Signatures with efficient protocols

Signatures with efficient protocols are a form of digital signature invented by Jan Camenisch and Anna Lysyanskaya in 2001. In addition to being secure digital signatures, they need to allow for the efficient implementation of two protocols: A protocol for computing a digital signature in a secure two-party computation protocol. A protocol for proving knowledge of a digital signature in a zero-knowledge protocol. In applications, the first protocol allows a signer to possess the signing key to issue a signature to a user (the signature owner) without learning all the messages being signed or the complete signature. The second protocol allows the signature owner to prove that he has a signature on many messages without revealing the signature and only a (possibly) empty subset of the messages. The combination of these two protocols allows for the implementation of digital credential and ecash protocols.

Internet Security Alliance

Internet Security Alliance (ISA) was founded in 2001 as a non-profit collaboration between Carnegie Mellon University's CyLab and Electronic Industries Alliance, a federation of trade associations. The Internet Security Alliance is focused on cyber security, acting as a forum for information sharing and leadership on information security, and lobbying for corporate security interests. == International operations == The Internet Security Alliance operates with a global membership to provide international security for its partners. The organization's membership includes companies located on four continents, and the Executive Committee always includes at least one non-U.S.-based company. The Internet Security Alliance believes that international communication is crucial for long-term greater information security, as it allows for a more realistic approach to addressing the many challenges faced by users of the Internet. == Publications == Published in 2009, The Financial Impact of Cyber Risk is the first known guidance document to attempt to approach the financial impact of cyber risks from the perspective of core business functions. It claims to provide guidance to CFOs and their colleagues responsible for legal issues, business operations and technology, privacy and compliance, risk assessment and insurance, and corporate communications.

Defence Information Infrastructure

Defence Information Infrastructure (DII) is a secure military network owned by the United Kingdom's Ministry of Defence MOD. It is used by all branches of the armed forces, including the Royal Navy, British Army and Royal Air Force as well as MOD civil servants. It reaches to deployed bases and ships at sea, but not to aircraft in flight. In 2000, the MOD began to plan the systems replacement project. In March 2005, the MOD gave a contract to the Atlas Consortium, with EDS as prime contractor, for installation and management over 10 years. That has developed into a consortium made up of DXC Technology (formerly EDS), Fujitsu, Airbus Defence and Space (formerly EADS Defence & Security) and CGI (formerly Logica). Starting in May 2016, MOD users of DII begin to migrate to the New Style of IT within the defence to be known as MODNET; again supported by ATLAS. == Overview == DII supports 2,000 MOD sites with some 150,000 terminals (desktops and laptops) and 300,000 user accounts. It is designed to offer a high level of resilience, flexibility, and security in the provision of connectivity from ‘business space to battlespace’ in MOD offices in the UK, bases overseas, at sea, and on the front line. It aims to rationalise and improve IT provision for the defence sector in the 21st century; involving a major culture change for MOD users and their ways of working through a structure of shared working areas with controlled security and access. It should provide a records management system and search facility together with a range of office services. It hosts several hundred COTS (commercial off-the-shelf) and bespoke MOD applications from a range of suppliers judged to meet the required security standards. The network handles alphanumeric data, graphics, and video. The system carries information from Restricted to above-Secret levels, but users are able to see only the data and applications for which they are authorised. == Incremental approach == In order to de-risk the programme Atlas and the MOD took an incremental approach to the development and implementation of DII, with a separate contract for each increment. The extended timeline allowed the MOD flexibility in defining its requirements. Increment 1: Contract awarded March 2005. This covered 70,000 user access devices (UADs) and 200,000 user accounts in the Restricted and Secret domains in 680 fixed locations. Increment 2a: Contract awarded December 2006. This was for an additional 44,000 UADs and 58,000 user accounts in the Restricted and Secret domains, again in fixed locations. Increment 2b: Contract awarded September 2007: This extended DII(F) into the deployed environment with the provision of UADs to support land and maritime deployed operations. Increment 2c: Signed in January 2009. This extended the DII footprint into the above-Secret domain to support a number of key operations and intelligence initiatives. Increment 3a: Contract awarded January 2010. Atlas provided 42,000 UADs operating in the Restricted and Secret domains to the remaining MOD fixed sites. This supported some 60,000 personnel, notably within the RAF, at Joint Helicopter Command and other MOD locations. Increment 3a received an MOD Chief of Defence Materiel commendation. == Costs and transparency == The Ministry of Defence informed Parliament the system would cost £2.3bn, even though it knew the cost would be at least £5.8bn. By 2008 the programme was running at least 18 months late; had delivered only 29,000 of a contracted 63,000 terminals; and had delivered none of the contracted Secret capability. In January 2010 the Parliamentary Under-Secretary of State for Defence announced that the Ministry of Defence had authorised DII increment 3a at a cost of around £540 million to provide 42,000 terminals within the RAF and at Joint Helicopter Command. He stated that the project would deliver "benefits" worth over £1.6 billion over the 10 years of the contract. That year the project was scheduled to cost at least £7bn, however, the UK government said it might attempt to reduce this sum. By 2014 the rollout of all UK terminals was complete and a refresh of the original desktops and printers to new hardware underway. The overseas rollout was coming to an end and well over half the fleet, including aircraft carrier HMS Queen Elizabeth, equipped. The final part of Secret capability deployment was scheduled to complete in summer of 2014.

Hybrid intelligent system

Hybrid intelligent system denotes a software system which employs, in parallel, a combination of methods and techniques from artificial intelligence subfields, such as: Neuro-symbolic systems Neuro-fuzzy systems Hybrid connectionist-symbolic models Fuzzy expert systems Connectionist expert systems Evolutionary neural networks Genetic fuzzy systems Rough fuzzy hybridization Reinforcement learning with fuzzy, neural, or evolutionary methods as well as symbolic reasoning methods. From the cognitive science perspective, every natural intelligent system is hybrid because it performs mental operations on both the symbolic and subsymbolic levels. For the past few years, there has been an increasing discussion of the importance of A.I. Systems Integration. Based on notions that there have already been created simple and specific AI systems (such as systems for computer vision, speech synthesis, etc., or software that employs some of the models mentioned above) and now is the time for integration to create broad AI systems. Proponents of this approach are researchers such as Marvin Minsky, Ron Sun, Aaron Sloman, Angelo Dalli and Michael A. Arbib. An example hybrid is a hierarchical control system in which the lowest, reactive layers are sub-symbolic. The higher layers, having relaxed time constraints, are capable of reasoning from an abstract world model and performing planning (even by hybrid wisdom). Intelligent systems usually rely on hybrid reasoning processes, which include induction, deduction, abduction and reasoning by analogy.

Cut, copy, and paste

Cut, copy, and paste are essential commands of modern human–computer interaction and user interface design. They offer an interprocess communication technique for transferring data through a computer's user interface. The cut command removes the selected data from its original position, and the copy command creates a duplicate; in both cases the selected data is kept in temporary storage called the clipboard. Clipboard data is later inserted wherever a paste command is issued. The data remains available to any application supporting the feature, thus allowing easy data transfer between applications. The command names are a (skeuomorphic) interface metaphor based on the physical procedure used in manuscript print editing to create a page layout, like with paper. The commands were pioneered into computing by Xerox PARC in 1974, popularized by Apple Computer in the 1983 Lisa workstation and the 1984 Macintosh computer, and in a few home computer applications such as the 1984 word processor Cut & Paste. This interaction technique has close associations with related techniques in graphical user interfaces (GUIs) that use pointing devices such as a computer mouse (by drag and drop, for example). Typically, clipboard support is provided by an operating system as part of its GUI and widget toolkit. The capability to replicate information with ease, changing it between contexts and applications, involves privacy concerns because of the risks of disclosure when handling sensitive information. Terms like cloning, copy forward, carry forward, or re-use refer to the dissemination of such information through documents, and may be subject to regulation by administrative bodies. == History == === Origins === The term "cut and paste" comes from the traditional practice in manuscript editing, whereby people cut paragraphs from a page with scissors and paste them onto another page. This practice remained standard into the 1980s. Stationery stores sold "editing scissors" with blades long enough to cut an 8½"-wide page. The advent of photocopiers made the practice easier and more flexible. The act of copying or transferring text from one part of a computer-based document ("buffer") to a different location within the same or different computer-based document was a part of the earliest on-line computer editors. As soon as computer data entry moved from punch-cards to online files (in the mid/late 1960s) there were "commands" for accomplishing this operation. This mechanism was often used to transfer frequently-used commands or text snippets from additional buffers into the document, as was the case with the QED text editor. === Early methods === The earliest editors (designed for teleprinter terminals) provided keyboard commands to delineate a contiguous region of text, then delete or move it. Since moving a region of text requires first removing it from its initial location and then inserting it into its new location, various schemes had to be invented to allow for this multi-step process to be specified by the user. Often this was done with a "move" command, but some text editors required that the text be first put into some temporary location for later retrieval/placement. In 1983, the Apple Lisa became the first text editing system to call that temporary location "the clipboard". Earlier control schemes such as NLS used a verb—object command structure, where the command name was provided first and the object to be copied or moved was second. The inversion from verb—object to object—verb on which copy and paste are based, where the user selects the object to be operated before initiating the operation, was an innovation crucial for the success of the desktop metaphor as it allowed copy and move operations based on direct manipulation. === Popularization === Inspired by early line and character editors, such as Pentti Kanerva's TV-Edit, that broke a move or copy operation into two steps—between which the user could invoke a preparatory action such as navigation—Lawrence G. "Larry" Tesler proposed the names "cut" and "copy" for the first step and "paste" for the second step. Beginning in 1974, he and colleagues at Xerox PARC implemented several text editors that used cut/copy-and-paste commands to move and copy text. Apple Computer popularized this paradigm with its Lisa (1983) and Macintosh (1984) operating systems and applications. The functions were mapped to key combinations using the ⌘ Command key as a special modifier, which is held down while also pressing X for cut, C for copy, or V for paste. These few keyboard shortcuts allow the user to perform all the basic editing operations, and the keys are clustered at the left end of the bottom row of the standard QWERTY keyboard. These are the standard shortcuts: Control-Z (or ⌘ Command+Z) to undo Control-X (or ⌘ Command+X) to cut Control-C (or ⌘ Command+C) to copy Control-V (or ⌘ Command+V) to paste The IBM Common User Access (CUA) standard also uses combinations of the Insert, Del, Shift and Control keys. Early versions of Windows used the IBM standard. Microsoft later also adopted the Apple key combinations with the introduction of Windows, using the control key as modifier key. Similar patterns of key combinations, later borrowed by others, are widely available in most GUI applications. The original cut, copy, and paste workflow, as implemented at PARC, utilizes a unique workflow: With two windows on the same screen, the user could use the mouse to pick a point at which to make an insertion in one window (or a segment of text to replace). Then, by holding shift and selecting the copy source elsewhere on the same screen, the copy would be made as soon as the shift was released. Similarly, holding shift and control would copy and cut (delete) the source. This workflow requires many fewer keystrokes/mouse clicks than the current multi-step workflows, and did not require an explicit copy buffer. It was dropped, one presumes, because the original Apple and IBM GUIs were not high enough density to permit multiple windows, as were the PARC machines, and so multiple simultaneous windows were rarely used. == Cut and paste == Computer-based editing can involve very frequent use of cut-and-paste operations. Most software-suppliers provide several methods for performing such tasks, and this can involve (for example) key combinations, pulldown menus, pop-up menus, or toolbar buttons. The user selects or "highlights" the text or file for moving by some method, typically by dragging over the text or file name with the pointing-device or holding down the Shift key while using the arrow keys to move the text cursor. The user performs a "cut" operation via key combination Ctrl+x (⌘+x for Macintosh users), menu, or other means. Visibly, "cut" text immediately disappears from its location. "Cut" files typically change color to indicate that they will be moved. Conceptually, the text has now moved to a location often called the clipboard. The clipboard typically remains invisible. On most systems only one clipboard location exists, hence another cut or copy operation overwrites the previously stored information. Many UNIX text-editors provide multiple clipboard entries, as do some Macintosh programs such as Clipboard Master, and Windows clipboard-manager programs such as the one in Microsoft Office. The user selects a location for insertion by some method, typically by clicking at the desired insertion point. A paste operation takes place which visibly inserts the clipboard text at the insertion point. (The paste operation does not typically destroy the clipboard text: it remains available in the clipboard and the user can insert additional copies at other points). Whereas cut-and-paste often takes place with a mouse-equivalent in Windows-like GUI environments, it may also occur entirely from the keyboard, especially in UNIX text editors, such as Pico or vi. Cutting and pasting without a mouse can involve a selection (for which Ctrl+x is pressed in most graphical systems) or the entire current line, but it may also involve text after the cursor until the end of the line and other more sophisticated operations. The clipboard usually stays invisible, because the operations of cutting and pasting, while actually independent, usually take place in quick succession, and the user (usually) needs no assistance in understanding the operation or maintaining mental context. Some application programs provide a means of viewing, or sometimes even editing, the data on the clipboard. == Copy and paste == The term "copy-and-paste" refers to the popular, simple method of reproducing text or other data from a source to a destination. It differs from cut and paste in that the original source text or data does not get deleted or removed. The popularity of this method stems from its simplicity and the ease with which users can move data between various applications visually – without resorting to permanent storage. Use in healthcare do