AI Art Can't Be Copyrighted

AI Art Can't Be Copyrighted — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Linux color management

Linux color management has the same goal as the color management systems (CMS) for other operating systems, which is to achieve the best possible color reproduction throughout an imaging workflow from its source (camera, video, scanner, etc.), through imaging software (Digikam, darktable, RawTherapee, GIMP, Krita, Scribus, etc.), and finally onto an output medium (monitor, video projector, printer, etc.). In particular, color management attempts to enable color consistency across media and throughout a color-managed workflow. Linux color management relies on the use of accurate ICC (International Color Consortium) and DCP (DNG Color Profile) profiles describing the behavior of input and output devices, and color-managed applications that are aware of these profiles. These applications perform gamut conversions between device profiles and color spaces. Gamut conversions, based on accurate device profiles, are the essence of color management. Historically, color management was not an initial design consideration of the X Window System on which much of Linux graphics support rests, and thus color-managed workflows have been somewhat more challenging to implement on Linux than on other OS's such as Microsoft Windows or macOS. This situation is now being progressively remedied, and color management under Linux, while functional, has not yet acquired mature status. Although it is now possible to obtain a consistent color-managed workflow under Linux, certain problems still remain: The absence of a central user control panel for color settings. Some hardware devices for color calibration lack Linux drivers, firmware or accessory data. Since ICC color profiles are written to an open specification, they are compatible across operating systems. Hence, a profile produced on one OS should work on any other OS given the availability of the necessary software to read it and perform the gamut conversions. This can be used as a workaround for the lack of support for certain spectrophotometers or colorimeters under Linux: one can simply produce a profile on a different OS and then use it in a Linux workflow. Additionally, certain hardware, such as most printers and certain monitors, can be calibrated under another OS and then used in a fully color-managed workflow on Linux. The popular Ubuntu Linux distribution added initial color management in the 11.10 release (the "Oneiric Ocelot" release). == Requirements for a color-managed workflow == Accurate device profiles obtained with source or output characterization software. Correctly loaded video card lookup tables (LUTs) (or monitor profiles that do not require LUT adjustments). Color-managed applications that are configured to use a correct monitor profile and input/output profiles, with support for control over the rendering intent and black point compensation. Calibration and profiling requires: for input devices (scanner, camera, etc.) a color target which the profiling software will compare to the manufacturer-provided color values of the target. or for output devices (monitor, printer, etc.) a reading with a specific device (spectrophotometer, colorimeter or spectrocolorimeter) of the color patch values and comparing the measured values against the values originally sent for output. === Monitor calibration and profiling === One of the critical elements in any color-managed workflow is the monitor, because, at one step or another, handling and making color adaptation through imaging software is required for most images, thus the ability of the monitor to present accurate colors is crucial. Monitor color management consists of calibration and profiling. The first step, calibration, is done by adjusting the monitor controls and the output of the graphics card (via calibration curves) to match user-definable characteristics, such as brightness, white point and gamma. The calibration settings are stored in a .cal file. The second step, profiling (characterization), involves measuring the calibrated display's response and recording it in a color profile. The profile is stored in an .icc file ("ICC file"). For convenience, the calibration settings are usually stored together with the profile in the ICC file. Note that .icm files are identical to .icc files - the difference is only in the name. Seeing correct colors requires using a monitor profile-aware application, together with the same calibration used when profiling the monitor. Calibration alone does not yield accurate colors. If a monitor was calibrated before it was profiled, the profile will only yield correct colors when used on the monitor with the same calibration (the same monitor control adjustments and the same calibration curves loaded into the video card's lookup table). macOS has built-in support for loading calibration curves and installing a system-wide color profile. Windows 7 onward allows loading calibration curves, though this functionality must be enabled manually. Linux and older versions of Windows require using a standalone LUT loader. === Device profiles === ICC profiles are cross-platform and can thus be created on other operating systems and used under Linux. Monitor profiles, however, require some additional attention. Since a monitor profile depends both on the monitor itself and on the video card, a monitor profile should only be used with the same monitor and video card with which it was created. The monitor settings should not be adjusted after creating the profile. In addition, since most calibration software use LUT adjustments during calibration, the corresponding LUTs must be loaded every time the display server (X11, Wayland) is started (e.g. with every graphical login). In the unlikely case of a colorimeter being unsupported by Linux, a profile created under Windows or macOS can be used under Linux. === Display-channel lookup tables === There are two approaches to loading display channel LUTs: Create a profile that does not modify video card LUTs and thus does not require LUTs be loaded later on. Ideally, this approach would rely on DDC-capable monitors—the internal monitor settings of which are set via calibration software. Unfortunately, monitors capable of making these adjustments through DDC are not common and are generally expensive. There is only one calibration software on Linux that can interact with a DDC monitor. For mainstream monitors, a couple of options exist: BasICColor software, which works with most colorimeters on the market, allows one to adjust display output via the monitor interface, and then to choose a "Profile, do not calibrate" option. By doing this, one can create a profile that does not require video card LUT adjustments. For EyeOne devices, EyeOne Match allows the user to calibrate to "Native" gamma and white point targets, which results in the LUT adjustment curves displayed after the calibration as a simple, linear 1:1 mapping (a straight line from corner to corner). Both BasICColor and EyeOne Match do not presently run under Linux but they are capable of creating a profile that does not require LUT adjustments. Use an LUT loader to actually load the LUT adjustments contained within the profile prepared during calibration. According to the documentation, these loaders do not modify the video card LUT by itself, but achieve the same type of adjustment by modifying the X server gamma ramp. Loaders are available for Linux distributions that use X.org or XFree86—the two most popular X servers on Linux. Other X servers are not guaranteed to work with the currently available loaders. There are two LUT loaders available for Linux: Xcalib is one such loader, and although it is a command-line utility, it is quite easy to use. dispwin is a part of Argyll CMS. If, for any reason, the LUT cannot be loaded, it is still recommended to go through the initial stages of calibration where a user is asked by calibration software to make some manual adjustments to the monitor, as this will often improve display linearity and also provide information on its color temperature. This is especially recommended for CRT monitors. === Color-managed applications === In ICC-aware applications, it is important to make sure the correct profiles are assigned to devices, mainly to the monitor and the printer. Some Linux applications can auto-detect the monitor profile, while others requires that it is specified manually. Although there is no designated place to store device profiles on Linux, /usr/share/color/icc/ has become the de facto standard. Most applications running under WINE have not been fully tested for color accuracy. While 8-bpp programs can have some color resolution difficulties due to depth conversion errors, colors in higher-depth applications should be accurate, as long as those programs perform their gamut conversions based on the same monitor profile as that used for loading the LUT, granted that the corresponding LUT adjustments are loaded. == List of color-managed applications == darktabl
Read more →
Social media as a public utility

Social media as a public utility is a theory postulating that social networking sites (such as Meta - ie:Facebook & Instagram or Alphabet - ie: YouTube & Google, but also independent sites such as Twitter, Tumblr, Snapchat etc.) are essential public services that should be regulated by the government, in a manner similar to how electric and phone utilities are typically government regulated. It is based on the notion that social media platforms have monopoly power and broad social influence. == Background == === Definitions === Social media is defined as "a group of Internet-based applications that build on the ideological and technological foundations of Web 2.0, and that allow the creation and exchange of User Generated Content." Furthermore, the New Zealand Government of Internal Affairs describes it as "a set of online technologies, sites, and practices which are used to share opinions, experiences and perspectives. Fundamentally it is about the conversation. In contrast with traditional media, the nature of social media is to be highly interactive." Moreover, the term social media is described as online tools that let people interact and communicate with each other. This has become a standard word for online cultural exchange and a dominant way for individuals to engage on the internet. By using social media individuals become more closely and strongly connected than ever before. The traditional definition of the term public utility is "an infrastructural necessity for the general public where the supply conditions are such that the public may not be provided with a reasonable service at reasonable prices because of monopoly in the area." Conventional public utilities include water, natural gas, and electricity. In order to secure the interests of the public, utilities are regulated. Public utilities can also be seen as natural monopolies implying that the highest degree of efficiency is accomplished under one operator in the marketplace. Public utility regulation for social media has been largely criticized because people believe it would produce undesirable and indirect effects. However, others say that truly effective government regulation would produce valuable results. Social media as a public utility is a crucial debate because utilities get regulated, so marking social media websites as utilities would require government regulation of various social media websites and platforms such as Facebook, Google, and Twitter. Applying the term public utility to social media implies that social media websites are public necessities, and, consequently, should be regulated by the government. While social media are not as essential for survival as traditional public utilities such as electricity, water, and natural gas, many people believe it has become vital for living in an interconnected world and without it, living a successful life would be difficult. Therefore, many people believe that social media has reached utility status and should be treated as a public utility. However, others believe that this is not true because social media are constantly revolutionizing and giving such platforms "utility status" would result in government regulation, which would consequently hinder innovation. Over the past decade many have debated and questioned whether or not "Internet service providers should be considered essential facilities or natural monopolies and regulated as public utilities." === Monopoly === A monopoly is defined as "a firm that is the only seller of a product or service having no close substitutes." A natural monopoly is when the entire demand within a relevant market can be satisfied at lowest cost by one firm rather than by two or more, and if such a market contains more than one firm then the firms will "quickly shake down to one through mergers or failures, or production will continue to consume more resources than necessary." In a monopoly competition is said to be short-lived, and in a natural monopoly it is said to produce inefficient results." Public utility companies can be regulated to prevent them from gaining monopolistic control. In November 2011 AT&T's proposal for merging with T-Mobile was rejected because it would have "diminished competition," and have led to the company having monopolistic power within the telephone industry. Such regulation is permitted because the telephone industry is a public utility. Similarly, Microsoft has also been prevented from taking various business actions that could result in the company gaining monopolistic power. If social media were a public utility then regulation of Google and Facebook would similarly dictate what they could and could not do. The possibility was raised in 2018 by U.S. Representative Steve King during a House Judiciary hearing on social media filtering practices. == Arguments == Advocates of this theory believe that social media websites already act like public utilities, and therefore regulation is needed. Additionally, advocates say that in the 21st century, using such websites are as necessary for communication as using traditional public utilities such as telephone, water, electricity, and natural gas are for other everyday uses. Specifically, advocates note that Google search should be treated as a public utility and needs to be regulated because it dominates the search engine market and no website can afford to ignore it. There is the position that a social media website such as Google "is a common carrier and should be regulated as such (Newman 2011)." These are reinforced by a perception that social media companies fail to properly maintain fair platforms for discourse. === Individual level === Advocates of regulating social media as a public utility believe that having an Internet presence using social media websites is imperative for individuals to adequately take part in the 21st century. Consequently, they argue that these sites are public utilities that need to be regulated to ensure that the constitutional rights of users are protected. For example, regulation may be needed to protect freedom of speech against risks such as Internet censorship and deplatforming. Social media affects people's behavior. For instance, it plays an important role in shaping its users' decisions and actions pertaining to health. This is demonstrated in a Pew Research Center research, which showed that 72 percent of American adults turned to social media for health information in 2011. Around 70 percent of people with chronic illnesses also use the platform to find cure, diagnoses, and other health answers. This development becomes a public issue as social media are likely to provide wrong medical information. Additionally, social media sites can also facilitate deleterious health behavior such as smoking, drug use, and harmful sexual behavior. === Business level === Advocates of social media as a public utility maintain that social media services dominate the Internet and are mainly owned by three or four companies that have unparalleled power to shape user interaction, and because of this power such businesses need to be regulated as public utilities. Zeynep Tufekci, University of North Carolina Chapel Hill, claims that services on the Internet such as Google, eBay, Facebook, Amazon.com, are all natural monopolies. She has stated that these services "benefit greatly from network externalities[,] which means that the more people on the service, the more useful it is for everyone," and thus it is difficult to replace the market leader. === Government level === Advocates of social media as a public utility believe that the government should impose restrictions on social media websites, such as Google, that are designed to benefit its rivals. Due to the recent substantial growth of social media websites such as Google, advocates claim that such a website "might need search neutrality regulation modeled after net neutrality regulation and that a Federal Search Commission might be needed to enforce such a regime." danah boyd expresses a future issue which the government may have to deal with in her research: Facebook is becoming an international social media website, specifically prevalent in Canada and Europe which are "two regions that love to regulate their utilities." Furthermore, recent books by New America Foundation Senior Fellow Rebecca MacKinnon and law professor Lori Andrews advise society to start considering Facebook and Google as nation-states or the "sovereigns of cyberspace." Overall, advocates of social media as a public utility believe that due to the immense popularity and necessity of social media websites, it is imperative that the Government imposes regulations in the same manner they do for electricity, water, and natural gas. == Counterarguments == Opponents of this theory say that social media websites should not be treated as public utilities because these platforms are changing every year, and because they are not essential services for s
Read more →
MIME Object Security Services

MIME Object Security Services (MOSS) is a protocol that uses the multipart/signed and multipart/encrypted framework to apply digital signature and encryption services to MIME objects. == Details == The services are offered through the use of end-to-end cryptography between an originator and a recipient at the application layer. Asymmetric (public key) cryptography is used in support of the digital signature service and encryption key management. Symmetric (secret key) cryptography is used in support of the encryption service. The procedures are intended to be compatible with a wide range of public key management approaches, including both ad hoc and certificate-based schemes. Mechanisms are provided to support many public key management approaches. == Spreading == MOSS was never widely deployed and is now abandoned, largely due to the popularity of PGP.
Read more →
Hyper-encryption

Hyper-encryption is a form of encryption invented by Michael O. Rabin which uses a high-bandwidth source of public random bits, together with a secret key that is shared by only the sender and recipient(s) of the message. It uses the assumptions of Ueli Maurer's bounded-storage model as the basis of its secrecy. Although everyone can see the data, decryption by adversaries without the secret key is still not feasible, because of the space limitations of storing enough data to mount an attack against the system. Unlike almost all other cryptosystems except the one-time pad, hyper-encryption can be proved to be information-theoretically secure, provided the storage bound cannot be surpassed. Moreover, if the necessary public information cannot be stored at the time of transmission, the plaintext can be shown to be impossible to recover, regardless of the computational capacity available to an adversary in the future, even if they have access to the secret key at that future time. A highly energy-efficient implementation of a hyper-encryption chip was demonstrated by Krishna Palem et al. using the Probabilistic CMOS or PCMOS technology and was shown to be ~205 times more efficient in terms of Energy-Performance-Product.
Read more →
Web intelligence

Web intelligence is the area of scientific research and development that explores the roles and makes use of artificial intelligence and information technology for new products, services and frameworks that are empowered by the World Wide Web. The term was coined in a paper written by Ning Zhong, Jiming Liu Yao and Y.Y. Ohsuga in the Computer Software and Applications Conference in 2000. == Research == The research about the web intelligence covers many fields – including data mining (in particular web mining), information retrieval, pattern recognition, predictive analytics, the semantic web, web data warehousing – typically with a focus on web personalization and adaptive websites.
Read more →
Social media mining

Social media mining is the process of obtaining data from user-generated content on social media in order to extract actionable patterns, form conclusions about users, and act upon the information. Mining supports targeting advertising to users or academic research. The term is an analogy to the process of mining for minerals. Mining companies sift through raw ore to find the valuable minerals; likewise, social media mining sifts through social media data in order to discern patterns and trends about matters such as social media usage, online behaviour, content sharing, connections between individuals, buying behaviour. These patterns and trends are of interest to companies, governments and not-for-profit organizations, as such organizations can use the analyses for tasks such as design strategies, introduce programs, products, processes or services. Social media mining uses concepts from computer science, data mining, machine learning, and statistics. Mining is based on social network analysis, network science, sociology, ethnography, optimization and mathematics. It attempts to formally represent, measure and model patterns from social media data. In the 2010s, major corporations, governments and not-for-profit organizations began mining to learn about customers, clients and others. Platforms such as Google, Facebook (partnered with Datalogix and BlueKai) conduct mining to target users with advertising. Scientists and machine learning researchers extract insights and design product features. Users may not understand how platforms use their data. Users tend to click through Terms of Use agreements without reading them, leading to ethical questions about whether platforms adequately protect users' privacy. During the 2016 United States presidential election, Facebook allowed Cambridge Analytica, a political consulting firm linked to the Trump campaign, to analyze the data of an estimated 87 million Facebook users to profile voters, creating controversy when this was revealed. == Background == As defined by Kaplan and Haenlein, social media is the "group of internet-based applications that build on the ideological and technological foundations of Web 2.0, and that allow the creation and exchange of user-generated content." There are many categories of social media including, but not limited to, social networking (Facebook or LinkedIn), microblogging (Twitter), photo sharing (Flickr, Instagram, Photobucket, or Picasa), news aggregation (Google Reader, StumbleUpon, or Feedburner), video sharing (YouTube, MetaCafe), livecasting (Ustream or Twitch), virtual worlds (Kaneva), social gaming (World of Warcraft), social search (Google, Bing, or Ask.com), and instant messaging (Google Talk, Skype, or Yahoo! messenger). The first social media website was introduced by GeoCities in 1994. It enabled users to create their own homepages without having a sophisticated knowledge of HTML coding. The first social networking site, SixDegrees.com, was introduced in 1997. Since then, many other social media sites have been introduced, each providing service to millions of people. These individuals form a virtual world in which individuals (social atoms), entities (content, sites, etc.) and interactions (between individuals, between entities, between individuals and entities) coexist. Social norms and human behavior govern this virtual world. By understanding these social norms and models of human behavior and combining them with the observations and measurements of this virtual world, one can systematically analyze and mine social media. Social media mining is the process of representing, analyzing, and extracting meaningful patterns from data in social media, resulting from social interactions. It is an interdisciplinary field encompassing techniques from computer science, data mining, machine learning, social network analysis, network science, sociology, ethnography, statistics, optimization, and mathematics. Social media mining faces grand challenges such as the big data paradox, obtaining sufficient samples, the noise removal fallacy, and evaluation dilemma. Social media mining represents the virtual world of social media in a computable way, measures it, and designs models that can help us understand its interactions. In addition, social media mining provides necessary tools to mine this world for interesting patterns, analyze information diffusion, study influence and homophily, provide effective recommendations, and analyze novel social behavior in social media. == Uses == Social media mining is used across several industries including business development, social science research, health services, and educational purposes. Once the data received goes through social media analytics, it can then be applied to these various fields. Often, companies use the patterns of connectivity that pervade social networks, such as assortativity—the social similarity between users that are induced by influence, homophily, and reciprocity and transitivity. These forces are then measured via statistical analysis of the nodes and connections between these nodes. Social analytics also uses sentiment analysis, because social media users often relay positive or negative sentiment in their posts. This provides important social information about users' emotions on specific topics. These three patterns have several uses beyond pure analysis. For example, influence can be used to determine the most influential user in a particular network. Companies would be interested in this information in order to decide who they may hire for influencer marketing. These influencers are determined by recognition, activity generation, and novelty—three requirements that can be measured through the data mined from these sites. Analysts also value measures of homophily: the tendency of two similar individuals to become friends. Users have begun to rely on information of other users' opinions in order to understand diverse subject matter. These analyses can also help create recommendations for individuals in a tailored capacity. By measuring influence and homophily, online and offline companies are able to suggest specific products for individuals consumers, and groups of consumers. Social media networks can use this information themselves to suggest to their users possible friends to add, pages to follow, and accounts to interact with. == Perception == Modern social media mining is a controversial practice that has led to exponential gains in user growth for tech giants such as Facebook, Inc., Twitter, and Google. Companies such as these, considered "Big Tech" are companies that build algorithms that take advantage of user input to understand their preferences, and keep them on the platform as much as possible. These inputs, that can be as simple as time spent on a given screen, provide the data being mined, and lead to companies profiting heavily from using that data to capitalize on extremely accurate predictions about user behavior. The growth of platforms accelerated rapidly once these strategies were put in place; Most of the largest platforms now average over 1 billion active users per month as of 2021. It has been claimed by a multitude of anti-algorithm personalities, like Tristan Harris or Chamath Palihapitiya, that certain companies (specifically Facebook) valued growth above all else, and ignored potential negative impacts from these growth engineering tactics. At the same time, users have now created their own data arbitrages with the help of their own data, through content monetization and becoming influencers. Users typically have access to a varied set of analytics specific to people that interact with them on social media, and can use these as building blocks for their own targeting and growth strategies through ads and posts that cater to their audiences. Influencers also commonly promote products and services for established brands, creating one of the largest digital industries: Influencer marketing. Instagram, Facebook, Twitter, YouTube, Google, and others have long given access to platform analytics, and allowed third parties to access that information as well, at times unbeknownst to even the user whose data is being viewed/bought. == Research == === Research areas === Social media event detection – Social networks enable users to freely communicate with each other and share their recent news, ongoing activities or views about different topics. As a result, they can be seen as a potentially viable source of information to understand the current emerging topics/events. Public health monitoring and surveillance - Using large-scale analysis of social media to study large cohorts of patients and the general public, e.g. to obtain early warning signals of drug-drug interactions and adverse drug reactions, or understand human reproduction and sexual interest. Community structure (Community Detection/Evolution/Evaluation) – Identifying communities on social networks, how t
Read more →
Social media use in hiring

Social media use in hiring refers to the examination by employers of job applicants' (public) social media profiles as part of the hiring assessment. For example, the vast majority of Fortune 500 companies use social media as a tool to screen prospective employees and as a tool for talent acquisition. This practice raises ethical questions. Employers and recruiters note that they have access only to information that applicants choose to make public. Many Western-European countries restrict employer's use of social media in the workplace. States including Arkansas, California, Colorado, Illinois, Maryland, Michigan, Nevada, New Jersey, New Mexico, Utah, Washington, and Wisconsin protect applicants and employees from surrendering usernames and passwords for social media accounts. Use of social media has caused significant problems for some applicants who are active on social media. A 2013 survey of 17,000 young people in six countries found that one in ten people aged 16 to 34 claimed to have been rejected for a job because of social media activity. Social media services have been reported to affect deception in resumes. While these services do not affect deception frequency, it does increase deception about interests and hobbies. == Ethical implications == This issue raises many ethical questions that some consider an employer's right and others consider discrimination. As of 2016, except in the states of California, Maryland, and Illinois, there are no laws that prohibit employers from using social media profiles as a basis of whether or not someone should be hired. Title VII also prohibits discrimination during any aspect of employment including hiring or firing, recruitment, or testing. Social media has been integrating into the workplace, and this has led to conflicts within employees and employers.[107] Particularly, Facebook has been seen as a popular platform for employers to investigate in order to learn more about potential employees. This conflict first started in Maryland when an employer requested and received an employee's Facebook username and password. State lawmakers first introduced legislation in 2012 to prohibit employers from requesting passwords to personal social accounts in order to get a job or to keep a job. This led to Canada, Germany, the U.S. Congress and 11 U.S. states to pass or propose legislation that prevents employers' access to private social accounts of employees.[108] Many Western European countries have already implemented laws that restrict the regulation of social media in the workplace. States including Arkansas, California, Colorado, Illinois, Maryland, Michigan, Nevada, New Jersey, New Mexico, Utah, Washington, and Wisconsin have passed legislation that protects potential employees and current employees from employers that demand them to give forth their username or password for a social media account. Laws that forbid employers from disciplining an employee based on activity off the job on social media sites have also been put into act in states including California, Colorado, Connecticut, North Dakota, and New York. Several states have similar laws that protect students in colleges and universities from having to grant access to their social media accounts. Eight states have passed the law that prohibits post secondary institutions from demanding social media login information from any prospective or current students and privacy legislation has been introduced or is pending in at least 36 states as of July 2013. As of May 2014, legislation has been introduced and is in the process of pending in at least 28 states and has been enacted in Maine and Wisconsin. In addition, the National Labor Relations Board has been devoting a lot of their attention to attacking employer policies regarding social media that can discipline employees who seek to speak and post freely on social media sites. Use of social media by young people has caused significant problems for some applicants who are active on social media when they try to enter the job market. A survey of 17,000 young people in six countries in 2013 found that 1 in 10 people aged 16 to 34 have been rejected for a job because of online comments they made on social media websites. A 2014 survey of recruiters found that 93% of them check candidates' social media postings. Moreover, professor Stijn Baert of Ghent University conducted a field experiment in which fictitious job candidates applied for real job vacancies in Belgium. They were identical except in one respect: their Facebook profile photos. It was found that candidates with the most wholesome photos were a lot more likely to receive invitations for job interviews than those with the more controversial photos. In addition, Facebook profile photos had a greater impact on hiring decisions when candidates were highly educated. These cases have created some privacy implications as to whether or not companies should have the right to look at employee's Facebook profiles. In March 2012, Facebook decided they might take legal action against employers for gaining access to employee's profiles through their passwords. According to Facebook Chief Privacy Officer for policy, Erin Egan, the company has worked hard to give its users the tools to control who sees their information. He also said users shouldn't be forced to share private information and communications just to get a job. According to the network's Statement of Rights and Responsibilities, sharing or soliciting a password is a violation of Facebook policy. Employees may still give their password information out to get a job, but according to Erin Egan, Facebook will continue to do their part to protect the privacy and security of their users. == Impacts == Use of social media by young people has caused significant problems for some applicants who are active on social media when they try to enter the job market. A survey of 17,000 young people in six countries in 2013 found that 1 in 10 people aged 16 to 34 have been rejected for a job because of online comments they made on social media websites. A 2014 survey of recruiters found that 93% of them check candidates' social media postings. Moreover, in 2015 professor Stijn Baert of Ghent University conducted a field experiment in which fictitious job candidates applied for real job vacancies in Belgium. They were identical except in one respect: their Facebook profile photos. It was found that candidates with the most wholesome photos were a lot more likely to receive invitations for job interviews than those with the more controversial photos. In addition, Facebook profile photos had a greater impact on hiring decisions when candidates were highly educated. These cases have created some privacy implications as to whether or not companies should have the right to look at employee's Facebook profiles. In March 2012, Facebook decided they might take legal action against employers for gaining access to employee's profiles through their passwords. According to Facebook Chief Privacy Officer for policy, Erin Egan, the company has worked hard to give its users the tools to control who sees their information. He also said users shouldn't be forced to share private information and communications just to get a job. According to the network's Statement of Rights and Responsibilities, sharing or soliciting a password is a violation of Facebook policy. Employees may still give their password information out to get a job, but according to Erin Egan, Facebook will continue to do their part to protect the privacy and security of their users. == Policy Responses == 26 US states now have laws against an employer requiring a current or potential employee to give the employer their username and password.
Read more →
Caste census

Caste census is a proposed census to be conducted in India by the Central Government of India. The proposed census was decided under the leadership of Prime Minister Narendra Modi by the cabinet committee of political affairs (CCPA) on 30 April 2025. It has been decided that a caste enumeration should be included with the forthcoming census. The exact time has not been declared yet. It is unclear that when the next census will be held. The decision of the cabinet was announced by the Central Railway Minister Ashwini Vaishnaw. It has been seen as a step that would help in drafting "equitable and targeted" policies by the present Central Government of India led by the Bhartiya Janta Party in India. The Central Home Minister Amit Shah has described the decision as a "historic decision". He has also described that the historic decision as “committed to social justice”. The leader of opposition Rahul Gandhi has welcomed the decision. He said "We have shown we can pressure govt" He has demanded a clear timeline for its completion. He has called it "The first step towards deep social reform". == Description == The caste census is a systematic recording of individuals’ caste identities during the nationwide census in the country. The Central minister Ashwini Vaishnaw expressed his view on the proposed census and said that it would "strengthen the social and economic structure of our society while the nation continues to progress”. The Caste census will happen for the first time in 100 years by the Central Government of India. It will be the part of the upcoming census in India. == History == According to Peabody, the first systematic caste-wise enumeration of households in the Indian subcontinent was conducted between 1658 and 1664 across seven districts of the then Marwar Kingdom, including Jodhpur city which was its capital. It was conducted by the then home minister Munhata Nainsi of the kingdom for the purpose of tax documentation. It was not to for classification of society or creation of social hierarchies but solving a tax related problem. During the period of the British rule in India, caste census was included in the decadal censuses to categorise the population by caste, religion and occupation. In 1871–72, the first detailed caste census was conducted by the government of British Raj in India. It was practiced between the period 1881 to 1931. The last caste census was conducted in the year 1931 in which 4,147 castes were recorded. The largest population in the whole of British India (including Pakistan and Bangladesh) was of Brahmins. The population of Brahmins was recorded more than 1.5 crores. After Brahmin community, the second place was of Jatav (Chamar)community. The population of Jatav was a little more than 1.23 crores. On the third place were Rajputs. The population of Rajputs was 81 lakhs. The Rajput caste was followed by the Kunbi caste of Maharashtra. The population of Kunbi caste was 64 lakhs and 34 thousands. The Kunbi caste was followed by Yadav (Ahir) caste. The population of Yadav (Ahir) community was 56 lakhs and 82 thousands. The Yadav (Ahir) caste was followed by Teli community. The population of Teli community was 42 lakhs and 58 thousands. The Teli community was followed by Gwala community. The population of the Gwala community was 40 lakhs. After the independence of India, the caste enumeration was stopped by the newly independent Government of India led by the prime minister Pandit Jawahar Lal Nehru in 1951. The caste enumeration was stopped to avoid reinforcing social divisions in the Indian society. But, there was an exception made for the enumeration of the Scheduled Castes (SCs) and Scheduled Tribes (STs) in the decadal censuses. Therefore, the enumeration of the Scheduled Castes and the Scheduled Tribes is being conducted in every census since 1951. In 1961, the Government of India permitted states for conducting their own surveys to compile OBC lists, but national caste census was not conducted.
Read more →
Brain technology

Brain technology, or self-learning know-how systems, defines a technology that employs latest findings in neuroscience. [see also neuro implants] The term was first introduced by the Artificial Intelligence Laboratory in Zurich, Switzerland, in the context of the Roboy project. Brain Technology can be employed in robots, know-how management systems and any other application with self-learning capabilities. In particular, Brain Technology applications allow the visualization of the underlying learning architecture often coined as "know-how maps". == Research and applications == The first demonstrations of BC in humans and animals took place in the 1960s when Grey Walter demonstrated use of non-invasively recorded encephalogram (EEG) signals from a human subject to control a slide projector (Graimann et al., 2010). Soon after Jacques J. Vidal coined the term brain–computer interface (BCI) in 1971, the Defense Advanced Research Projects Agency (DARPA) first starting funding brain–computer interface research and has since funded several brain–computer interface projects. That market is expected to reach a value of $1.72 billion by 2022. Brain–computer interfaces record brain activity, transmit the information out of the body, signal-process the data via algorithms, and convert them into command control signals. In 2012, a landmark study in Nature, led by pioneer Leigh Hochberg, MD, PhD, demonstrated that two people with tetraplegia were able to control robotic arms through thought when connected to the BrainGate neural interface system. The two participants were able to reach for and grasp objects in three-dimensional space, and one participant used the system to serve herself coffee for the first time since becoming paralyzed nearly 15 years prior. And in October 2020, two patients were able to wirelessly control an operating system to text, email, shop and bank using direct thought through the Stentrode brain computer interface (Journal of NeuroInterventional Surgery) in a study led by Thomas Oxley. This was the first time a brain–computer interface was implanted via the patient's blood vessels, eliminating the need for open brain surgery. Currently a number of groups are exploring a range of experimental devices using brain–computer interfaces, which have the potential to fundamentally change the way of life for patients with paralysis and a wide range of neurological disorders. These include: as Elon Musk, Facebook, and the University of California in San Francisco. The systems. This technology is also being explored as a neuromodulation device and may ultimately help diagnose and treat a range of brain pathologies, such as epilepsy and Parkinson's disease.
Read more →
Eduroam

eduroam (a portmanteau of education and roaming) is an international Wi-Fi internet access roaming service for users in research, higher education and further education. It provides researchers, teachers, and students network access when visiting an institution other than their own. Users are authenticated with credentials from their home institution, regardless of the location of the eduroam access point. Authorization to access the Internet and other resources are handled by the visited institution. Users do not have to pay to use eduroam. In some countries, Internet access via eduroam is also available at other locations than the participating institutions, e.g. in libraries, public buildings, railway stations, city centres and airports. It is also available at many primary and secondary education institutions in Brazil and the US. == History == The eduroam initiative started in 2002 when during the preparations for the creation of TERENA's task force TF-Mobility, Klaas Wierenga of SURFnet shared the idea of combining a RADIUS-based infrastructure with IEEE 802.1X technology to provide roaming network access across research and education networks. Initially, the service was joined by institutions in the Netherlands, Germany, Finland, Portugal, Croatia and the United Kingdom. Later, other NRENs in Europe embraced the idea and started joining the infrastructure, which was then called eduroam. Since 2004, the European Union co-funded further research and development work related to the eduroam service through the GN2 and GN3 projects. From September 2007, the European Union also funded through these projects the continued operation and maintenance of the eduroam service at the European level. The first non-European country to join eduroam was Australia, in December 2004. In Canada, eduroam started as an initiative of the University of British Columbia, which was later taken over by CANARIE as a service of its Canadian Access Federation. In the United States, eduroam was initially a pilot project between the National Science Foundation and the University of Tennessee (UTK). In 2012, Internet2 announced the addition of eduroam to its NET+ service offerings. AnyRoam LLC, a private company, was formed by former UTK staff to serve as an Internet2 active corporate member administering the US top-level servers. In 2021, Internet2 assumed direct management of the eduroam service for US-based organizations. == Technology == The eduroam service uses IEEE 802.1X as the authentication method and a hierarchical system of RADIUS servers. The hierarchy typically consists of RADIUS servers at the participating institutions, national RADIUS servers run by the National Roaming Operators, and regional top-level RADIUS servers for individual world regions. In some cases, institutions contact each other directly via DNS lookups () When a user visits a remote institution, the user's device presents their credentials to the local RADIUS server. That RADIUS server discovers that it is not responsible for the realm of the user's home institution and proxies the access request to another RADIUS server, typically the national RADIUS server. If the visited institution is in a different country than the home institution, the request is in turn proxied to the regional top-level RADIUS server, and then to the national RADIUS server of the user's home country. That national server forwards the credentials to the home institution, where they are verified. The RADIUS response travels back over the proxy-hierarchy to the visited institution and the user is granted access. In eduroam, the user credentials are always presented in the form of an EAP method (). The EAP method is responsible for ensuring that the users credentials are secure, and private. The users credentials can then travel via a number of intermediate servers, not under the control of the home institution of the user. This requirement limits the types of EAP methods that can be used. EAP methods which do not provide for security or privacy of user credentials cannot be used in eduroam. The most commonly used EAP methods in eduroam are EAP-TLS, PEAP, and EAP-TTLS. The methods used generally fall into two broad categories: those that use credentials in the form of some public-key mechanism with certificates and those that use so-called tunnelled authentication with "inner" passwords or other credentials. Most institutions use a tunnelled authentication method that requires a server certificate. These server certificates are used to set up a secure tunnel between the mobile device and the authentication server, through which the user credentials (e.g. name and password) are securely transported. A complication arises if the user's home institution does not use a two-letter country-code top-level domain as part of its realm, but a generic top-level domain such as .edu or .org. By inspection of such realms, it is not possible to determine which national RADIUS server the request should be routed to. Such domains will thus, by default, fail to work in international roaming. The workaround for this problem involves the creation of exceptions in the international RADIUS request routing tables; however, this workaround does not scale as the number of exception entries grows. Several solutions have been proposed to eliminate this workaround in the future, the most promising of which is RADIUS over TLS with Dynamic Discovery, which does not rely on static routing tables inside a RADIUS server configuration to route requests to their proper destination. Instead, the participating institution adds one NAPTR DNS resource record to its own domain's DNS zone, which states by which server eduroam authentication for the domain is handled. == Governance == GÉANT has established a lightweight global governance structure. Recognising the large variety in the organisation and funding of research and education (networking) in different countries and regions, rules imposed on the operations of eduroam are limited to technical and administrative requirements that are necessary to ensure the smooth and secure operations of eduroam worldwide. Moreover, the eduroam operators have the leading role in creating and maintaining the rules of the global eduroam governance. The Global eduroam Governance Committee (GeGC) has the central role in the global eduroam governance structure. While its structure has evolved over time, it presently has three representatives from each of five regions — mirroring those used by the Regional Internet registries — serving a two-year term. In addition, GÉANT may appoint one or more experts as non-voting members of the GeGC. == Geographical deployment == eduroam is available at selected locations in countries with a National Roaming Operator that has signed the eduroam Compliance Statement. Those sixty-seven countries are listed below. In addition, there may be pilot deployments in countries that are in the process of joining eduroam. === Middle East === eduroam is deployed in: === Europe === The NRENs that are members of the consortium of the GN3 project have joined the European eduroam confederation by signing the confederation's policy that requires its members to comply with a set of technical and organisational requirements, which are more specific than those in the global eduroam Compliance Statement. As a consequence, eduroam is deployed in the following countries: In addition, three NRENs that are associate members of the consortium of the GN3 project without voting rights joined the European eduroam confederation; they represent Belarus (UIIP), Moldova (RENAM) and Russia (Joint Supercomputer Center of the Russian Academy of Sciences). Finally, five NRENs not involved in the GN3 project joined the European eduroam confederation on a voluntary basis, enabling the deployment of the service in: The European top-level RADIUS servers are operated by SURFnet and Forskningsnettet. === Asia-Pacific === eduroam is deployed in the following countries and economies: The Asia-Pacific top-level RADIUS servers are operated by AARNet and by the University of Hong Kong. === North America === eduroam is deployed in: === Latin America === eduroam is deployed in: === Africa === eduroam is deployed in: The inter-African RADIUS servers are operated by West-African research and education network WACREN, the UbuntuNet Alliance and TENET.
Read more →
Undeniable signature

An undeniable signature is a digital signature scheme which allows the signer to be selective to whom they allow to verify signatures. The scheme adds explicit signature repudiation, preventing a signer later refusing to verify a signature by omission; a situation that would devalue the signature in the eyes of the verifier. It was invented by David Chaum and Hans van Antwerpen in 1989. == Overview == In this scheme, a signer possessing a private key can publish a signature of a message. However, the signature reveals nothing to a recipient/verifier of the message and signature without taking part in either of two interactive protocols: Confirmation protocol, which confirms that a candidate is a valid signature of the message issued by the signer, identified by the public key. Disavowal protocol, which confirms that a candidate is not a valid signature of the message issued by the signer. The motivation for the scheme is to allow the signer to choose to whom signatures are verified. However, that the signer might claim the signature is invalid at any later point, by refusing to take part in verification, would devalue signatures to verifiers. The disavowal protocol distinguishes these cases removing the signer's plausible deniability. It is important that the confirmation and disavowal exchanges are not transferable. They achieve this by having the property of zero-knowledge; both parties can create transcripts of both confirmation and disavowal that are indistinguishable, to a third-party, of correct exchanges. The designated verifier signature scheme improves upon deniable signatures by allowing, for each signature, the interactive portion of the scheme to be offloaded onto another party, a designated verifier, reducing the burden on the signer. == Zero-knowledge protocol == The following protocol was suggested by David Chaum. A group, G, is chosen in which the discrete logarithm problem is intractable, and all operation in the scheme take place in this group. Commonly, this will be the finite cyclic group of order p contained in Z/nZ, with p being a large prime number; this group is equipped with the group operation of integer multiplication modulo n. An arbitrary primitive element (or generator), g, of G is chosen; computed powers of g then combine obeying fixed axioms. Alice generates a key pair, randomly chooses a private key, x, and then derives and publishes the public key, y = gx. === Message signing === Alice signs the message, m, by computing and publishing the signature, z = mx. === Confirmation (i.e., avowal) protocol === Bob wishes to verify the signature, z, of m by Alice under the key, y. Bob picks two random numbers: a and b, and uses them to blind the message, sending to Alice: c = magb. Alice picks a random number, q, uses it to blind, c, and then signing this using her private key, x, sending to Bob: s1 = cgq ands2 = s1x. Note that s1x = (cgq)x = (magb)xgqx = (mx)a(gx)b+q = zayb+q. Bob reveals a and b. Alice verifies that a and b are the correct blind values, then, if so, reveals q. Revealing these blinds makes the exchange zero knowledge. Bob verifies s1 = cgq, proving q has not been chosen dishonestly, and s2 = zayb+q, proving z is valid signature issued by Alice's key. Note that zayb+q = (mx)a(gx)b+q. Alice can cheat at step 2 by attempting to randomly guess s2. === Disavowal protocol === Alice wishes to convince Bob that z is not a valid signature of m under the key, gx; i.e., z ≠ mx. Alice and Bob have agreed an integer, k, which sets the computational burden on Alice and the likelihood that she should succeed by chance. Bob picks random values, s ∈ {0, 1, ..., k} and a, and sends: v1 = msga and v2 = zsya, where exponentiating by a is used to blind the sent values. Note that v2 = zsya = (mx)s(gx)a = v1x. Alice, using her private key, computes v1x and then the quotient, v1xv2−1 = (msga)x(zsgxa)−1 = msxz−s = (mxz−1)s. Thus, v1xv2−1 = 1, unless z ≠ mx. Alice then tests v1xv2−1 for equality against the values: (mxz−1)i for i ∈ {0, 1, …, k}; which are calculated by repeated multiplication of mxz−1 (rather than exponentiating for each i). If the test succeeds, Alice conjectures the relevant i to be s; otherwise, she conjectures random value. Where z = mx, (mxz−1)i = v1xv2−1 = 1 for all i, s is unrecoverable. Alice commits to i: she picks a random r and sends hash(r, i) to Bob. Bob reveals a. Alice confirms that a is the correct blind (i.e., v1 and v2 can be generated using it), then, if so, reveals r. Revealing these blinds makes the exchange zero knowledge. Bob checks hash(r, i) = hash(r, s), proving Alice knows s, hence z ≠ mx. If Alice attempts to cheat at step 3 by guessing s at random, the probability of succeeding is 1/(k + 1). So, if k = 1023 and the protocol is conducted ten times, her chances are 1 to 2100.
Read more →
Professional network service

A professional network service (or, in an Internet context, simply a professional network) is a type of social network service that focuses on interactions and relationships for business opportunities and career growth, with less emphasis on activities in personal life. A professional network service is used by working individuals, job-seekers, and businesses to establish and maintain professional contacts, to find work or hire employees, share professional achievements, sell or promote services, and stay up-to-date with industry news and trends. According to LinkedIn managing director Clifford Rosenberg in an interview with AAP in 2010, "[t]his is a call to action for professionals to re-address their use of social networks and begin to reap as many rewards from networking professionally as they do personally." Businesses mostly depend on resources and information outside the company and to get what they need, they need to reach out and professionally network with others, such as employees or clients as well as potential opportunities. "Nardi, Whittaker, and Schwarz (2002) point out three main tasks that they believe networkers need to attend to keep a successful professional (intentional) network: building a network, maintaining the network, and activating selected contacts. They stress that networkers need to continue to add new contacts to their network to access as many resources as possible and to maintain their network by staying in touch with their contacts. This is so that the contacts are easy to activate when the networker has work that needs to be done." By using a professional network service, businesses can keep all of their networks up-to-date, and in order, and helps figure out the best way to efficiently get in touch with each of them. A service that can do all that helps relieve some of the stress when trying to get things done. Not all professional network services are online sites that help promote a business. Some services connect the user to other services that help promote the business other than online sites, such as phone/Internet companies that provide services and companies that specifically are designed to do all of the promoting, online and in person, for a business. == History == In 1997, professional network services started up throughout the world and continue to grow. The first recognizable site to combine all features, such as creating profiles, adding friends, and searching for friends, was SixDegrees.com. According to Boyd and Ellison's article, "Social Network Sites: Definition, History, and Scholarship", from 1997 to 2001, several community tools began supporting various combinations of profiles and publicly articulated Friends. Boyd and Ellison go on to say that the next wave began with Ryze.com in 2001. It was introduced as a new way "to help people leverage their business networks". == Inside the works == Quite a lot of work is put into a professional network service, such as the number of hours that go into them and the type of people they work for, as well as the business model of it all, such as the professional interaction and the multiple services they deal with. === Types of services === Some professional network services not only help promote the business but can also help in connecting to other people. Those services may include a specific phone and/or Internet company or a company that helps to connect with other businesses. According to the Society for New Communications Research (SNCR), there are at least nine online professional networks that are being used. === Professional interaction === Kaplan and Haenlein elaborate on five key considerations for companies when utilizing media. These include the importance of careful selection, the option to choose existing applications or develop custom ones, ensuring alignment with organizational activities, integrating a comprehensive media plan, and providing accessibility to all stakeholders. ==== Choose carefully ==== "Choosing the right medium for any given purpose depends on the target group to be reached and the message to be communicated. On one hand, each Social Media application usually attracts a certain group of people, and firms should be active wherever their customers are present. On the other hand, there may be situations whereby certain features are necessary to ensure effective communication, and these features are only offered by one specific application." ==== Ensure activity alignment ==== "Sometimes you may decide to rely on various Social Media, or a set of different applications within the same group, to have the largest possible reach." "Using different contact channels can be a worthwhile and profitable strategy." According to the Society for New Communications Research at Harvard University, "the average professional belongs to 3–5 online networks for business use, and LinkedIn, Facebook, and Twitter are among the top used." ==== Integrate a media plan ==== Social media and traditional media are "both part of the same: your corporate image" in the customers' eyes. ==== Allow access to all ==== "...once the firm has decided to utilize Social Media applications, it is worth checking that all employees may access them." According to the SNCR, "the convergence of Internet, mobile, and social media has taken significant shape as professionals rely on anywhere access to information, relationships, and networks." ==== Online usage ==== "Half of the respondents report participating in 3 to 5 online professional networks. Another three in ten participate in 6 or more professional networks." "Popular social networks are now being used frequently as Professional Communities. More than nine in ten respondents indicated that they use LinkedIn and half reported using Facebook. Twitter and blogs were frequently listed as 'professional networks'." === Business model === According to Michael Rappa's article, Business models on the Web", "a business model is the method of doing business by which a company can sustain itself – that is, generate revenue. The business model spells out how a company makes money by specifying where it is positioned in the value chain." Rappa mentions that there are at least nine basic categories from which a business model can be separated. Those categories are a brokerage, advertising, infomediary, merchant, manufacturer, affiliate, community, subscription, and utility. "...a firm may combine several different models as part of its overall Internet business strategy." At first, Flickr started as a way to mainstream public relations. == Social impact == When it comes to the social impact that professional network services have on today's society, it has proved to increase activity. According to the SNCR, "[t]hree quarters of respondents rely on professional networks to support business decisions. Reliance has increased for essentially all respondents over the past three years. Younger (20–35) and older professionals (55+) are more active users of social tools than middle-aged professionals. More people are collaborating outside their company wall than within their organizational intranet." == Limitations == Since the internet and social media are a part of this "world where consumers can speak so freely with each other and businesses have increasingly less control over the information available about them in cyberspace", most firms and businesses are uncomfortable with all the freedom. According to Kaplan and Haenlein's article, "Users of the world, unite! The challenges and opportunities of Social Media", businesses are pushed aside and are only able to sit back and watch as their customers publicly post comments, which may or may not be well-written.
Read more →
Smart data capture

Smart data capture (SDC), also known as 'intelligent data capture' or 'automated data capture', describes the branch of technology concerned with using computer vision techniques like optical character recognition (OCR), barcode scanning, object recognition and other similar technologies to extract and process information from semi-structured and unstructured data sources. IDC characterize smart data capture as an integrated hardware, software, and connectivity strategy to help organizations enable the capture of data in an efficient, repeatable, scalable, and future-proof way. Data is captured visually from barcodes, text, IDs and other objects - often from many sources simultaneously - before being converted and prepared for digital use, typically by artificial intelligence-powered software. An important feature of SDC is that it focuses not just on capturing data more efficiently but serving up easy-to-access, actionable insights at the instant of data collection to both frontline and desk-based workers, aiding decision-making and making it a two-way process. Smart data capture automates and accelerates capture, applying insights in real time and automating processes based on extracted input. Smart data capture is designed to be repeatable and scalable to reduce low-level manual tasks and eliminate human error. To achieve this goal, smart data capture solutions are often made available using specialist software installed on commodity hardware such as smartphones. However, some solutions may rely on specialized hardware such as dedicated scanning devices, wearables or shop floor robots. == Differences from OCR == Optical character recognition applications are typically concerned with the actual data capture process; they are intended to faithfully reproduce text, words, letters and symbols from a printed document. Smart data capture is multimodal, capable of extracting data from a wider range of semi-structured and unstructured sources, going beyond basic text recognition to offer a wider scope of applications. By extending functionality to provide actionable insights at the point of capture, SDC is also a two-way process (capture-display), while OCR is more commonly one-way (capture only), primarily used for data input. Smart data capture solutions typically have two parts: Data capture (which includes OCR, barcode scanning, object recognition) Functionality that then uses this data to provide actionable insights at the point of capture. == Applications == Smart data capture can be applied to almost any industry and application that requires visual information capture and interpretation. This may include: Retail Warehouse inventory control Logistics, handling and shipping Manufacturing Field service Healthcare Transport and travel Fraud detection
Read more →
Hilscher netx network controller

The netX network controller family (based on ASICs), developed by Hilscher Gesellschaft für Systemautomation mbH, is a solution for implementing all proven Fieldbus and Real-Time Ethernet systems. It was the first Multi-Protocol ASIC which combines Real-Time-Ethernet and Fieldbus System in one solution. The Multiprotocol functionality is done over a flexible cpu sub system called XC. Through exchanging some microcode the XC is able to realize beside others a PROFINET IRT Switch, EtherCAT Slave, Ethernet Powerlink HUB, PROFIBUS, CAN bus, CC-Link Industrial Networks Interface. == The Hilscher netX family == === Multiplex Matrix IOs (MMIO) === The Multiplex Matrix is a set of PINs which could be configured freely with peripheral functions. Options are CAN, UART, SPI, I2C, GPIOs, PIOs and SYNC Trigger. === GPIOs === The GPIOs from Hilscher are able to generate Interrupts, could count level or flags, or could be connected to a timer unit to auto generate a PWM. The Resolution of the PWM is normally 10ns. In some netX ASICS is a dedicated Motion unit with a resolution if 1ns is available.
Read more →
Computer network engineering

Computer network engineering is a technology discipline within engineering that deals with the design, implementation, and management of computer networks. These systems contain both physical components, such as routers, switches, cables, and some logical elements, such as protocols and network services. Computer network engineers attempt to ensure that the data is transmitted efficiently, securely, and reliably over both local area networks (LANs) and wide area networks (WANs), as well as across the Internet. Computer networks often play a large role in modern industries ranging from telecommunications to cloud computing, enabling processes such as email and file sharing, as well as complex real-time services like video conferencing and online gaming. == Background == The evolution of network engineering is marked by significant milestones that have greatly impacted communication methods. These milestones particularly highlight the progress made in developing communication protocols that are vital to contemporary networking. This discipline originated in the 1960s with projects like ARPANET, which initiated important advancements in reliable data transmission. The advent of protocols such as TCP/IP revolutionized networking by enabling interoperability among various systems, which, in turn, fueled the rapid growth of the Internet. Key developments include the standardization of protocols and the shift towards increasingly complex layered architectures. These advancements have profoundly changed the way devices interact across global networks. == Network infrastructure design == The foundation of computer network engineering lies in the design of the network infrastructure. This involves planning both the physical layout of the network and its logical topology to ensure optimal data flow, reliability, and scalability. === Physical infrastructure === The physical infrastructure consists of the hardware used to transmit data, which is represented by the first layer of the OSI model. ==== Cabling ==== Copper cables such as ethernet over twisted pair are commonly used for short-distance connections, especially in local area networks (LANs), while fiber optic cables are favored for long-distance communication due to their high-speed transmission capabilities and lower susceptibility to interference. Fiber optics play a significant role in the backbone of large-scale networks, such as those used in data centers and internet service provider (ISP) infrastructures. ==== Wireless networks ==== In addition to wired connections, wireless networks have become a common component of physical infrastructure. These networks facilitate communication between devices without the need for physical cables, providing flexibility and mobility. Wireless technologies use a range of transmission methods, including radio frequency (RF) waves, infrared signals, and laser-based communication, allowing devices to connect to the network. Wi-Fi based on IEEE 802.11 standards is the most widely used wireless technology in local area networks and relies on RF waves to transmit data between devices and access points. Wireless networks operate across various frequency bands, including 2.4 GHz and 5 GHz, each offering unique ranges and data rates; the 2.4 GHz band provides broader coverage, while the 5 GHz band supports faster data rates with reduced interference, ideal for densely populated environments. Beyond Wi-Fi, other wireless transmission methods, such as infrared and laser-based communication, are used in specific contexts, like short-range, line-of-sight links or secure point-to-point communication. In mobile networks, cellular technologies like 3G, 4G, and 5G enable wide-area wireless connectivity. 3G introduced faster data rates for mobile browsing, while 4G significantly improved speed and capacity, supporting advanced applications like video streaming. The latest evolution, 5G, operates across a range of frequencies, including millimeter-wave bands, and provides high data rates, low latency, and support for more device connectivity, useful for applications like the Internet of Things (IoT) and autonomous systems. Together, these wireless technologies allow networks to meet a variety of connectivity needs across local and wide areas. ==== Network devices ==== Routers and switches help direct data traffic and assist in maintaining network security; network engineers configure these devices to optimize traffic flow and prevent network congestion. In wireless networks, wireless access points (WAP) allow devices to connect to the network. To expand coverage, multiple access points can be placed to create a wireless infrastructure. Beyond Wi-Fi, cellular network components like base stations and repeaters support connectivity in wide-area networks, while network controllers and firewalls manage traffic and enforce security policies. Together, these devices enable a secure, flexible, and scalable network architecture suitable for both local and wide-area coverage. === Logical topology === Beyond the physical infrastructure, a network must be organized logically, which defines how data is routed between devices. Various topologies, such as star, mesh, and hierarchical designs, are employed depending on the network’s requirements. In a star topology, for example, all devices are connected to a central hub that directs traffic. This configuration is relatively easy to manage and troubleshoot but can create a single point of failure. In contrast, a mesh topology, where each device is interconnected with several others, offers high redundancy and reliability but requires a more complex design and larger hardware investment. Large networks, especially those in enterprises, often employ a hierarchical model, dividing the network into core, distribution, and access layers to enhance scalability and performance. == Network protocols and communication standards == Communication protocols dictate how data in a network is transmitted, routed, and delivered. Depending on the goals of the specific network, protocols are selected to ensure that the network functions efficiently and securely. The Transmission Control Protocol/Internet Protocol (TCP/IP) suite is fundamental to modern computer networks, including the Internet. It defines how data is divided into packets, addressed, routed, and reassembled. The Internet Protocol (IP) is critical for routing packets between different networks. In addition to traditional protocols, advanced protocols such as Multiprotocol Label Switching (MPLS) and Segment Routing (SR) enhance traffic management and routing efficiency. For intra-domain routing, protocols like Open Shortest Path First (OSPF) and Enhanced Interior Gateway Routing Protocol (EIGRP) provide dynamic routing capabilities. On the local area network (LAN) level, protocols like Virtual Extensible LAN (VXLAN) and Network Virtualization using Generic Routing Encapsulation (NVGRE) facilitate the creation of virtual networks. Furthermore, Internet Protocol Security (IPsec) and Transport Layer Security (TLS) secure communication channels, ensuring data integrity and confidentiality. For real-time applications, protocols such as Real-time Transport Protocol (RTP) and WebRTC provide low-latency communication, making them suitable for video conferencing and streaming services. Additionally, protocols like QUIC enhance web performance and security by establishing secure connections with reduced latency. == Network security == As networks have become essential for business operations and personal communication, the demand for robust security measures has increased. Network security is a critical component of computer network engineering, concentrating on the protection of networks against unauthorized access, data breaches, and various cyber threats. Engineers are responsible for designing and implementing security measures that ensure the integrity and confidentiality of data transmitted across networks. Firewalls serve as barriers between trusted internal networks and external environments, such as the Internet. Network engineers configure firewalls, including next-generation firewalls (NGFW), which incorporate advanced features such as deep packet inspection and application awareness, thereby enabling more refined control over network traffic and protection against sophisticated attacks. In addition to firewalls, engineers use encryption protocols, including Internet Protocol Security (IPsec) and Transport Layer Security (TLS), to secure data in transit. These protocols provide a means of safeguarding sensitive information from interception and tampering. For secure remote access, Virtual Private Networks (VPNs) are deployed, using technologies to create encrypted tunnels for data transmission over public networks. These VPNs are often used for maintaining security when remote users access corporate networks but are also used ion other settings. To enhance threat detection and r
Read more →