AI Art Can't Be Copyrighted

AI Art Can't Be Copyrighted — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Film recorder

A film recorder is a graphical output device for transferring images to photographic film from a digital source. In a typical film recorder, an image is passed from a host computer to a mechanism to expose film through a variety of methods, historically by direct photography of a high-resolution cathode-ray tube (CRT) display. The exposed film can then be developed using conventional developing techniques, and displayed with a slide or motion picture projector. The use of film recorders predates the current use of digital projectors, which eliminate the time and cost involved in the intermediate step of transferring computer images to film stock, instead directly displaying the image signal from a computer. Motion picture film scanners are the opposite of film recorders, copying content from film stock to a computer system. Film recorders can be thought of as modern versions of kinescopes. == Design == === Operation === All film recorders typically work in the same manner. The image is fed from a host computer as a raster stream over a digital interface. A film recorder exposes film through various mechanisms; flying spot (early recorders); photographing a high resolution video monitor; electron beam recorder (Sony HDVS); a CRT scanning dot (Celco); focused beam of light from a light valve technology (LVT) recorder; a scanning laser beam (Arrilaser); or recently, full-frame LCD array chips. For color image recording on a CRT film recorder, the red, green, and blue channels are sequentially displayed on a single gray scale CRT, and exposed to the same piece of film as a multiple exposure through a filter of the appropriate color. This approach yields better resolution and color quality than possible with a tri-phosphor color CRT. The three filters are usually mounted on a motor-driven wheel. The filter wheel, as well as the camera's shutter, aperture, and film motion mechanism are usually controlled by the recorder's electronics and/or the driving software. CRT film recorders are further divided into analog and digital types. The analog film recorder uses the native video signal from the computer, while the digital type uses a separate display board in the computer to produce a digital signal for a display in the recorder. Digital CRT recorders provide a higher resolution at a higher cost compared to analog recorders due to the additional specialized hardware. Typical resolutions for digital recorders were quoted as 2K and 4K, referring to 2048×1366 and 4096×2732 pixels, respectively, while analog recorders provided a resolution of 640×428 pixels in comparison. Higher-quality LVT film recorders use a focused beam of light to write the image directly onto a film loaded spinning drum, one pixel at a time. In one example, the light valve was a liquid-crystal shutter, the light beam was steered with a lens, and text was printed using a pre-cut optical mask. The LVT will record pixel beyond grain. Some machines can burn 120-res or 120 lines per millimeter. The LVT is basically a reverse drum scanner. The exposed film is developed and printed by regular photographic chemical processing. === Formats === Film recorders are available for a variety of film types and formats. The 35 mm negative film and transparencies are popular because they can be processed by any photo shop. Single-image 4×5 film and 8×10 are often used for high-quality, large format printing. Some models have detachable film holders to handle multiple formats with the same camera or with Polaroid backs to provide on-site review of output before exposing film. == Uses == Film recorders are used in digital printing to generate master negatives for offset and other bulk printing processes. For preview, archiving, and small-volume reproduction, film recorders have been rendered obsolete by modern printers that produce photographic-quality hardcopies directly on plain paper. They are also used to produce the master copies of movies that use computer animation or other special effects based on digital image processing. However, most cinemas nowadays use Digital Cinema Packages on hard drives instead of film stock. === Computer graphics === Film recorders were among the earliest computer graphics output devices; for example, the IBM 740 CRT Recorder was announced in 1954. Film recorders were also commonly used to produce slides for slide projectors; but this need is now largely met by video projectors that project images directly from a computer to a screen. The terms "slide" and "slide deck" are still commonly used in presentation programs. === Current uses === Currently, film recorders are primarily used in the motion picture film-out process for the ever increasing amount of digital intermediate work being done. Although significant advances in large venue video projection alleviates the need to output to film, there remains a deadlock between the motion picture studios and theater owners over who should pay for the cost of these very costly projection systems. This, combined with the increase in international and independent film production, will keep the demand for film recording steady for at least a decade. == Key manufacturers == Traditional film recorder manufacturers have all but vanished from the scene or have evolved their product lines to cater to the motion picture industry. Dicomed was one such early provider of digital color film recorders. Polaroid, Management Graphics, Inc, MacDonald-Detwiler, Information International, Inc., and Agfa were other producers of film recorders. Arri is the only current major manufacturer of film recorders. Kodak Lightning I film recorder. One of the first laser recorders. Needed an engineering staff to set up. Kodak Lightning II film recorder used both gas and diode laser to record on to film. The last LVT machines produced by Kodak / Durst-Dice stopped production in 2002. There are no LVT film recorders currently being produced. LVT Saturn 1010 uses a LED exposure (RGB) to 8"x10" film at 1000-3000ppi. LUX Laser Cinema Recorder from Autologic/Information International in Thousand Oaks, California. Sales end in March 2000. Used on the 1997 film “Titanic”. Arri produces the Arrilaser line of laser-based motion picture film recorders. MGI produced the Solitaire line of CRT-based motion picture film recorders. Matrix, originally ImaPRO, a branch of Agfa Division, produced the QCR line of CRT-based motion picture film recorders. CCG, formerly Agfa film recorders, has been a steady manufacturer of film recorders based in Germany. In 2004 CCG introduced Definity, a motion picture film recorder utilizing LCD technology. In 2010 CCG introduced the first full LED LCD film recorder as a new step in film recording. Cinevator was made by Cinevation AS, in Drammen, Norway. The Cinevator was a real-time digital film recorder. It could record IN, IP and prints with and without sound Oxberry produced the Model 3100 film recorder camera system, with interchangeable pin-registered movements (shuttles) for 35 mm (full frame/Silent, 1.33:1) and 16 mm (regular 16, "2R"), and others have adapted the Oxberry movements for CinemaScope, 1.85:1, 1.75:1, 1.66:1, as well as Academy/Sound (1.37:1) in 35 mm and Super-16 in 16 mm ("1R"). For instance, the "Solitaire" and numerous others employed the Oxberry 3100 camera system. == History == Before video tape recorders or VTRs were invented, TV shows were either broadcast live or recorded to film for later showing, using the kinescope process. In 1967, CBS Laboratories introduced the Electronic Video Recording format, which used video and telecined-to-video film sources, which were then recorded with an electron-beam recorder at CBS' EVR mastering plant at the time to 35mm film stock in a rank of 4 strips on the film, which was then slit down to 4 8.75 mm (0.344 in) film copies, for playback in an EVR player. All types of CRT recorders were (and still are) used for film recording. Some early examples used for computer-output recording were the 1954 IBM 740 CRT Recorder, and the 1962 Stromberg-Carlson SC-4020, the latter using a Charactron CRT for text and vector graphic output to either 16 mm motion picture film, 16 mm microfilm, or hard-copy paper output. Later 1970 and 80s-era recording to B&W (and color, with 3 separate exposures for red, green, and blue)) 16 mm film was done with an EBR (Electron Beam Recorder), the most prominent examples made by 3M), for both video and COM (Computer Output Microfilm) applications. Image Transform in Universal City, California used specially modified 3M EBR film recorders that could perform color film-out recording on 16 mm by exposing three 16 mm frames in a row (one red, one green and one blue). The film was then printed to color 16 mm or 35 mm film. The video fed to the recorder could either be NTSC, PAL or SECAM. Later, Image Transform used specially modified VTRs to record 24 frame for their "Image Vision" system. The modified 1 inch type B videotape VTRs would record
Read more →
Five safes

The Five Safes is a framework for helping make decisions about making effective use of data which is confidential or sensitive. It is mainly used to describe or design research access to statistical data held by government and health agencies, and by data archives such as the UK Data Service. It is not an internationally accepted standard. Two of the Five Safes refer to statistical disclosure control, and so the Five Safes is usually used to contrast statistical and non-statistical controls when comparing data management options. == Concept == The Five Safes proposes that data management decisions be considered as solving problems in five 'dimensions': projects, people, settings, data and outputs. The combination of the controls leads to 'safe use'. These are most commonly expressed as questions, for example: These dimensions are scales, not limits. That is, solutions can have a mix of more or fewer controls in each dimension, but the overall aim of 'safe use' independent of the particular mix. For example, a public use file available for open download cannot control who uses it, where or for what purpose, and so all the control (protection) must be in the data itself. In contrast, a file which is only accessed through a secure environment with certified users can contain very sensitive information: the non-statistical controls allow the data to be 'unsafe'. One academic likened the process to a graphic equalizer, where bass and treble can be combined independently to produce a sound the listener likes, which has proven to be a very useful metaphor. This 2023 Data Foundation webinar is an expert discussion of how the elements interact, including an excellent introductory representation. There is no 'order' to the Five Safes, in that one is necessarily more important than the others. However, Ritchie argued that the 'managerial' controls (projects, people, setting) should be addressed before the 'statistical' controls (data, output). The Five Safes concept is associated with other topics which developed from the same programme at ONS, although these are not necessarily implemented. Safe people is associated with 'active researcher management', while safe outputs is linked with principles-based output statistical disclosure control. The Five Safes is a positive framework, describing what is and is not. The EDRU ('evidence-based, default-open, risk-managed, user-centred') attitudinal model is sometimes used to give a normative context == The 'data access spectrum' == From 2003 the Five Safes was also represented in a simpler form as a 'Data Access Spectrum'. The non-data controls (project, people, setting, outputs) tend to work together, in that organisations often see these as a complementary set of restrictions on access. These can then be contrasted with choices about data anonymisation to present a linear representation of data access options. This presentation is consistent with the idea of 'data as a residual', as well as data protection laws of the time which often characterised data simply as anonymous or not anonymous. A similar idea had already been developed independently in 2001 by Chuck Humphrey of the Canadian RDC network, the 'continuum of access'. More recently, The Open Data Institute has developed a 'Data Spectrum toolkit' which includes industry-specific examples. == History and terminology == The Five Safes was devised in the winter of 2002/2003 by Felix Ritchie at the UK Office for National Statistics (ONS) to describe its secure remote-access Virtual Microdata Laboratory (VML). It was described at this time as the 'VML Security Model'. This was adopted by the NORC data enclave, and more widely in the US, as the 'portfolio model' (although this is now also used to refer to a slightly different legal/statistical/educational breakdown). In 2012 the framework as was still being referred to as the 'VML security model', but its increasing use among non-UK organisations led to the adoption of the more general and informative phrase 'Five Safes'. The original framework only had four safes (projects, people, settings and outputs): the framework was used to describe highly detailed data access through a secure environment, and so the 'data' dimension was irrelevant. From 2007 onwards, 'safe data' was included as the framework was used to a describe a wider range of ONS activities. As the US version was based upon the 2005 specification, some US iterations uses have the original four dimensions (eg). Some discussions, such as the OECD, use the term 'secure' instead 'safe'. However, the use of both these terms can cause presentational problems: less control in a particular dimension could be seen to imply 'unsafe users' or 'insecure settings', for example, which distracts from the main message. Hence, the Australian government uses the term "five data sharing principles". The 'Anonymisation Decision-Making Framework' uses a framework based on the Five Safes but relabelling "projects", "people", and "settings" as "governance", "agency" and "infrastructure", respectively; "Output" is omitted, and "safe use" becomes "functional anonymisation". There is no reference to the Five Safes or any associated literature. The Australian version was required to include references to the Five Safes, and presented it as an alternative without comment. == Application == The framework has had three uses: pedagogical, descriptive, and design. Since 2016, it has also been used, directly and indirectly in legislation. See for more detailed examples. === Pedagogy === The first significant use of the framework, other than internal administrative use, was to structure researcher training courses at the UK Office for National Statistics from 2003. UK Data Archive, Administrative Data Research Network, Eurostat, Statistics New Zealand, the Mexican National Institute of Statistics and Geography, NORC, Statistics Canada and the Australian Bureau of Statistics, amongst others, have also used this framework. Most of these courses are for researchers using restricted-access facilities; the Eurostat courses are unusual in that they are designed for all users of sensitive data. === Description === The framework is often used to describe existing data access solutions (e.g. UK HMRC Data Lab, UK Data Service, Statistics New Zealand) or planned/conceptualised ones (e.g. Eurostat in 2011). An early use was to help identify areas where ONS' still had 'irreducible risks' in its provision of secure remote access. The framework is mostly used for confidential social science data. To date it appears to have made little impact on medical research planning, although it is now included in the revised guidelines on implementing HIPAA regulations in the US, and by Cancer Research UK and the Health Foundation in the UK. It has also been used to describe a security model for the Scottish Health Informatics Programme. === Design === In general the Five Safes has been used to describe solutions post-factum, and to explain/justify choices made, but an increasing number of organisations have used the framework to design data access solutions. For example, the Hellenic Statistical Agency developed a data strategy built around the Five Safes in 2016; the UK Health Foundation used the Five Safes to design its data management and training programmes. Use in the private sector is less common but some organisations have incorporated the Five Safes into consulting services. In 2015 the UK Data Service organized a workshop to encourage data users from the academic and private sectors to think about how to manage confidential research data, using the Five Safes to demonstrate alternative options and best practice. Early adopters for strategic design use were in Australia: both the Australian Bureau of Statistics and the Australian Department of Social Service used the Five Safes as an ex ante design tool. In 2017 the Australian Productivity Commission recommended adopting a version of the framework to support cross-government data sharing and re-use. This underwent extensive consultation and culminated in the DAT Act 2022. Since 2020 the Five Safes has been the overriding framework for the design of new secure facilities and data sharing arrangements in the UK for public health and social sciences. This has been promoted by the Office for Statistics Regulation, the UK Statistics Authority, NHS DIgital, and the research funding bodies Administrative Data Research UK and DARE UK. === Regulation and legislation === Three laws have incorporated the Fives Safes. They are explicit in the South Australian Public Sector (Data Sharing) Act 2016, and implicit in the research provisions of the UK Digital Economy Act 2017. The Australian Data Availability and Transparency Act 2022 renames the Five Safes as the Five Data Sharing Principles.A 2025 statutory review of the DAT Act 2022 found "that the DAT Act has not been effective in achieving its objectives.". The review includes specific referen
Read more →
Information literacy

The Association of College and Research Libraries defines information literacy as a "set of integrated abilities encompassing the reflective discovery of information, the understanding of how information is produced and valued and the use of information in creating new knowledge and participating ethically in communities of learning". In the United Kingdom, the Chartered Institute of Library and Information Professionals' definition also makes reference to knowing both "when" and "why" information is needed. The 1989 American Library Association (ALA) Presidential Committee on Information Literacy formally defined information literacy (IL) as attributes of an individual, stating that "to be information literate, a person must be able to recognize when information is needed and have the ability to locate, evaluate and use effectively the needed information". In 1990, academic Lori Arp published a paper asking, "Are information literacy instruction and bibliographic instruction the same?" Arp argued that neither term was particularly well defined by theoreticians or practitioners in the field. Further studies were needed to lessen the confusion and continue to articulate the parameters of the question. The Alexandria Proclamation of 2005 defined the term as a human rights issue: "Information literacy empowers people in all walks of life to seek, evaluate, use and create information effectively to achieve their personal, social, occupational and educational goals. It is a basic human right in a digital world and promotes social inclusion in all nations." The United States National Forum on Information Literacy defined information literacy as "the ability to know when there is a need for information, to be able to identify, locate, evaluate, and effectively use that information for the issue or problem at hand." Meanwhile, in the UK, the library professional body CILIP, define information literacy as "the ability to think critically and make balanced judgements about any information we find and use. It empowers us as citizens to develop informed views and to engage fully with society." A number of other efforts have been made to better define the concept and its relationship to other skills and forms of literacy. Other pedagogical outcomes related to information literacy include traditional literacy, computer literacy, research skills and critical thinking skills. Information literacy as a sub-discipline is an emerging topic of interest and counter measure among educators and librarians with the prevalence of misinformation, fake news, and disinformation. Scholars have argued that in order to maximize people's contributions to a democratic and pluralistic society, educators should be challenging governments and the business sector to support and fund educational initiatives in information literacy. == History == The phrase "information literacy" first appeared in print in a 1974 report written on behalf of the National Commission on Libraries and Information Science by Paul G. Zurkowski, who was at the time president of the Information Industry Association (now the Software and Information Industry Association). Zurkowski used the phrase to describe the "techniques and skills" learned by the information literate "for utilizing the wide range of information tools as well as primary sources in molding information solutions to their problems" and drew a relatively firm line between the "literates" and "information illiterates." The concept of information literacy appeared again in a 1976 paper by Lee Burchina presented at the Texas A&M University library's symposium. Burchina identified a set of skills needed to locate and use information for problem solving and decision making. In another 1976 article in Library Journal, M.R. Owens applied the concept to political information literacy and civic responsibility, stating, "All [people] are created equal but voters with information resources are in a position to make more intelligent decisions than citizens who are information illiterates. The application of information resources to the process of decision-making to fulfill civic responsibilities is a vital necessity." In a literature review published in an academic journal in 2020, Oral Roberts University professor Angela Sample cites several conceptual waves of information literacy definitions as defining information as a way of thinking, a set of skills, and a social practice. The introduction of these concepts led to the adoption of a mechanism called metaliteracy and the creation of threshold concepts and knowledge dispositions, which led to the creation of the ALA's Information Literacy Framework. The American Library Association's Presidential Committee on Information Literacy released a report on January 10, 1989. Titled as the Presidential Committee on Information Literacy: Final Report, the article outlines the importance of information literacy, opportunities to develop it, and the idea of an Information Age School. The recommendations of the Committee led to establishment of the National Forum on Information Literacy, a coalition of more than 90 national and international organizations. In 1998, the American Association of School Librarians and the Association for Educational Communications and Technology published Information Power: Building Partnerships for Learning, which further established specific goals for information literacy education, defining some nine standards in the categories of "information literacy," "independent learning," and "social responsibility." Also in 1998, the Presidential Committee on Information Literacy updated its final report. The report outlined six recommendations from the original report, and examined areas of challenge and progress. In 1999, the Society of College, National and University Libraries (SCONUL) in the UK published The Seven Pillars of Information Literacy to model the relationship between information skills and IT skills, and the idea of the progression of information literacy into the curriculum of higher education. In 2003, the National Forum on Information Literacy, along with UNESCO and the National Commission on Libraries and Information Science, sponsored an international conference in Prague. Representatives from twenty-three countries gathered to discuss the importance of information literacy in a global context. The resulting Prague Declaration described information literacy as a "key to social, cultural, and economic development of nations and communities, institutions and individuals in the 21st century" and declared its acquisition as "part of the basic human right of lifelong learning". In the United States specifically, information literacy was prioritized in 2009 during President Barack Obama's first term. In effort to stress the value information literacy has on everyday communication, he designated October as National Information Literacy Awareness Month in his released proclamation. In 2015, the Association of College and Research Libraries (ACRL) adopted the Framework for Information Literacy for Higher Education, which defines information literacy as "the set of integrated abilities encompassing the reflective discovery of information, the understanding of how information is produced and valued, and the use of information in creating new knowledge and participating ethically in communities of learning".Association of College and Research Libraries (2015-02-09). "Framework for Information Literacy for Higher Education". Association of College and Research Libraries. American Library Association. Retrieved 2026-02-17. == Presidential Committee on Information Literacy == The American Library Association's Presidential Committee on Information Literacy defined information literacy as the ability "to recognize when information is needed and have the ability to locate, evaluate, and use effectively the needed information" and highlighted information literacy as a skill essential for lifelong learning and the production of an informed and prosperous citizenry. The committee outlined six principal recommendations. Included were recommendations like "Reconsider the ways we have organized information institutionally, structured information access, and defined information's role in our lives at home in the community, and in the work place"; to promote "public awareness of the problems created by information illiteracy"; to develop a national research agenda related to information and its use; to ensure the existence of "a climate conducive to students' becoming information literate"; to include information literacy concerns in teacher education democracy. In the updated report, the committee ended with an invitation, asking the National Forum and regular citizens to recognize that "the result of these combined efforts will be a citizenry which is made up of effective lifelong learners who can always find the information needed for the issue or decision at hand. This new
Read more →
Cancer Likelihood in Plasma

Cancer Likelihood in Plasma (CLiP) refers to a set of ensemble learning methods for integrating various genomic features useful for the noninvasive detection of early cancers from blood plasma. An application of this technique for early detection of lung cancer (Lung-CLiP) was originally described by Chabon et al. (2020) from the labs of Ash Alizadeh and Max Diehn at Stanford. This method relies on several improvements to cancer personalized profiling by deep sequencing (CAPP-Seq) for analysis of circulating tumor DNA (ctDNA). The CLiP technique integrates multiple distinctive genomic features of a cancer of interest findings within a machine-learning framework for cancer detection. For example, studies have shown that the majority of somatic mutations found in cell-free DNA (cfDNA) are not tumor derived, but instead reflect clonal hematopoeisis (also known as CHIP). Even though CHIP tends to target specific genes, it also involves many generally non-recurrent mutations that can be shed from leukocytes and detected in cfDNA, regardless of whether profiling patients with cancer and healthy adults. However, genuine tumor derived ctDNA mutations can be distinguished from CHIP-derived mutations. This is because unlike tumor-derived mutations, CHIP-derived mutations that are shed from leukocytes into plasma tend to occur on longer cfDNA fragments, and to lack specific mutational signatures such as those associated with tobacco smoking in lung cancer that are also found in tumor derived ctDNA molecules. CLiP integrates these features within hierarchical ensemble machine learning models that consider somatic mutations and copy number alternations, among other features. While the CLiP method is unique in relying exclusively on mutations and copy number alterations, it is related to a variety of other liquid biopsy methods being commercially developed for early cancer detection using ctDNA and proteins (e.g., CancerSEEK / DETECT-A ), cfDNA fragmentation patterns (e.g., DELFI), and DNA methylation (e.g., cfMeDIP-Seq, Grail). While the CLiP method has not yet been broadly applied for population-based cancer screening, it has been shown to distinguish discriminate early-stage lung cancers from risk-matched controls across multiple cohorts of patients enrolled across the US.
Read more →
ShowScoop

ShowScoop is a website and mobile app platform on which users can rate and review artists, concerts, and music festivals that they have seen/attended. The reviews and ratings are designed to be informative of how well such performances are live. This helps concert-goers decide which live music events they want to attend. == History == ShowScoop was founded in August 2012 by Micah Smurthwaite and is based out of San Diego, CA. In February 2013, ShowScoop launched its mobile app at the SF Music Tech Summit. The application is currently available on the iPhone, with plans to expand into the Android market in the future. == Services == ShowScoop uses crowdsourcing to provide accurate ratings of live concert experiences. In addition to viewing ratings, users are encouraged to rate and review concerts they have attended. The ShowScoop database includes nearly one million artists and over 2.5 million live music events. ShowScoop users can rate artists on four aspects of the performance: stage presence, crowd interaction, sound quality, and visual effects. The rating system uses an ascending scale from one to five in each of the aspects, with five being the highest score. In addition to the quantitative ratings, ShowScoop users are also free to write qualitative reviews in a provided comment section. This allows users to explain their ratings and add further insight or opinion. ShowScoop incorporates several facets of social media into its services. Users can create a user profile to share limited personal information and store their ratings and reviews. Users are also given the option of sharing their evaluations with their social networks on Facebook and Twitter. Users can "like" reviews, follow artists, and follow other ShowScoop users. The mobile app allows users to take photos, apply filters, and share the final image in conjunction with reviews and through Instagram. == Road Crew == ShowScoop's "Road Crew" is a group made up of top contributors within the ShowScoop community. The Road Crew assists in curating artist pages, assuring information quality and accuracy. In return, members of the Road Crew are given incentives, including free tickets to concerts and personal invitations to exclusive shows. Applicants to the Road Crew are judged on the number and quality of their reviews, the photos and videos they have posted, and their general engagement with the ShowScoop community in following and liking users and reviews.
Read more →
SQL programming tool

In the field of software, SQL programming tools provide platforms for database administrators (DBAs) and application developers to perform daily tasks efficiently and accurately. Database administrators and application developers often face constantly changing environments which they rarely completely control. Many changes result from new development projects or from modifications to existing code, which, when deployed to production, do not always produce the expected result. For organizations to better manage development projects and the teams that develop code, suppliers of SQL programming tools normally provide more than facility to the database administrator or application developer to aid in database management and in quality code-deployment practices. == Features == SQL programming tools may include the following features: === SQL editing === SQL editors allow users to edit and execute SQL statements. They may support the following features: cut, copy, paste, undo, redo, find (and replace), bookmarks block indent, print, save file, uppercase/lowercase keyword highlighting auto-completion access to frequently used files output of query result editing query-results committing and rolling-back transactions inside cut paper === Object browsing === Tools may display information about database objects relevant to developers or to database administrators. Users may: view object descriptions view object definitions (DDL) create database objects enable and disable triggers and constraints recompile valid or invalid objects query or edit tables and views Some tools also provide features to display dependencies among objects, and allow users to expand these dependent objects recursively (for example: packages may reference views, views generally reference tables, super/subtypes, and so on). === Session browsing === Database administrators and application developers can use session browsing tools to view the current activities of each user in the database. They can check the resource-usage of individual users, statistics information, locked objects and the current running SQL of each individual session. === User-security management === DBAs can create, edit, delete, disable or enable user-accounts in the database using security-management tools. DBAs can also assign roles, system privileges, object privileges, and storage-quotas to users. === Debugging === Some tools offer features for the debugging of stored procedures: step in, step over, step out, run until exception, breakpoints, view & set variables, view call stack, and so on. Users can debug any program-unit without making any modification to it, including triggers and object types. === Performance monitoring === Monitoring tools may show the database resources — usage summary, service time summary, recent activities, top sessions, session history or top SQL — in easy-to-read graphs. Database administrators can easily monitor the health of various components in the monitoring instance. Application developers may also make use of such tools to diagnose and correct application-performance problems as well as improve SQL server performance. === Test data === Test data generation tools can populate the database by realistic test data for server or client side testing purposes. Also, this kind of software can upload sample blob files to database.
Read more →
Relational data stream management system

A relational data stream management system (RDSMS) is a distributed, in-memory data stream management system (DSMS) that is designed to use standards-compliant SQL queries to process unstructured and structured data streams in real-time. Unlike SQL queries executed in a traditional RDBMS, which return a result and exit, SQL queries executed in a RDSMS do not exit, generating results continuously as new data become available. Continuous SQL queries in a RDSMS use the SQL Window function to analyze, join and aggregate data streams over fixed or sliding windows. Windows can be specified as time-based or row-based. == RDSMS SQL Query Examples == Continuous SQL queries in a RDSMS conform to the ANSI SQL standards. The most common RDSMS SQL query is performed with the declarative SELECT statement. A continuous SQL SELECT operates on data across one or more data streams, with optional keywords and clauses that include FROM with an optional JOIN subclause to specify the rules for joining multiple data streams, the WHERE clause and comparison predicate to restrict the records returned by the query, GROUP BY to project streams with common values into a smaller set, HAVING to filter records resulting from a GROUP BY, and ORDER BY to sort the results. The following is an example of a continuous data stream aggregation using a SELECT query that aggregates a sensor stream from a weather monitoring station. The SELECTquery aggregates the minimum, maximum and average temperature values over a one-second time period, returning a continuous stream of aggregated results at one second intervals. RDSMS SQL queries also operate on data streams over time or row-based windows. The following example shows a second continuous SQL query using the WINDOW clause with a one-second duration. The WINDOW clause changes the behavior of the query, to output a result for each new record as it arrives. Hence the output is a stream of incrementally updated results with zero result latency.
Read more →
Gen (software)

Gen is a Computer Aided Software Engineering (CASE) application development environment marketed by Broadcom Inc. Gen was previously known as CA Gen, IEF (Information Engineering Facility), Composer by IEF, Composer, COOL:Gen, Advantage:Gen and AllFusion Gen. The toolset originally supported the information technology engineering methodology developed by Clive Finkelstein, James Martin and others in the early 1980s. Early versions supported IBM's DB2 database, 3270 'block mode' screens and generated COBOL code. In the intervening years the toolset has been expanded to support additional development techniques such as component-based development; creation of client/server and web applications and generation of C, Java and C#. In addition, other platforms are now supported such as many variants of Unix-like Operating Systems (AIX, HP-UX, Solaris, Linux) as well as Windows. Its range of supported database technologies have widened to include ORACLE, Microsoft SQL Server, ODBC, JDBC as well as the original DB2. The toolset is fully integrated - objects identified during analysis carry forward into design without redefinition. All information is stored in a repository (central encyclopedia). The encyclopedia allows for large team development - controlling access so that multiple developers may not change the same object simultaneously. == History == === 1985-1997: Texas Instruments === It was initially produced by Texas Instruments, with input from James Martin and his consultancy firm James Martin Associates, and was based on the Information Engineering Methodology (IEM). The first version was launched in 1985. IEF (Information Engineering Facility) became popular among large government departments and public utilities. It initially supported a CICS/COBOL/DB2 target environment. However, it now supports a wider range of relational databases and operating systems. IEF was intended to shield the developer from the complexities of building complete multi-tier cross-platform applications. In 1995, Texas Instruments decided to change their marketing focus for the product. Part of this change included a new name - "Composer". By 1996, IEF had become a popular tool. However, it was criticized by some IT professionals for being too restrictive, as well as for having a high per-workstation cost ($15K USD). But it is claimed that IEF reduces development time and costs by removing complexity and allowing rapid development of large scale enterprise transaction processing systems. === 1997-2000: Sterling Software === In 1997, Composer had another change of branding, Texas Instruments sold the Texas Instruments Software division, including the Composer rights, to Sterling Software. Sterling software changed the well known name "Information Engineering Facility" to "COOL:Gen". COOL was an acronym for "Common Object Oriented Language" - despite the fact that there was little object orientation in the product. === 2000-2018: Computer Associates === In 2000, Sterling Software was acquired by Computer Associates (now CA). CA has rebranded the product three times to date and the product is still used widely today. Under CA, recent releases of the tool added support for the CA-Datacom DBMS, the Linux operating system, C# code generation and ASP.NET web clients. The current version is known as CA Gen - version 8 being released in May 2010, with support for customised web services, and more of the toolset being based around the Eclipse framework. === 2018-current: Broadcom === As of 2020, CA Gen is owned and marketed by Broadcom Inc., which rebranded the product to Gen to avoid confusion with the former owner of the product. There are a variety of "add-on" tools available for Gen, including GuardIEn - a Configuration Management and Developer Productivity Suite, QAT Wizard, an interview style wizard that takes advantage of the meta model in Gen, products for multi-platform application reporting and XML/SOAP enabling of Gen applications., and developer productivity tools such as Access Gen, APMConnect, QA Console and Upgrade Console from Response Systems Version 8.6 of CA Gen came to market in June 2016. Version 8.6.3 of CA Gen was released in 2021. Following this release, Broadcom have switched to a continuous delivery model with new features to be delivered as patches.
Read more →
Adobe InDesign

Adobe InDesign is a desktop publishing and page layout designing software application produced by Adobe and first released in 1999. It can be used to create works such as posters, flyers, brochures, magazines, newspapers, presentations, books and ebooks. InDesign can also publish content suitable for tablet devices in conjunction with Adobe Digital Publishing Suite. Graphic designers and production artists are the principal users. InDesign is the successor to PageMaker, which Adobe acquired by buying Aldus Corporation in late 1994. (Freehand, Aldus's competitor to Adobe Illustrator, was licensed from Altsys, the maker of Fontographer.) By 1998, PageMaker had lost much of the professional market to the comparatively feature-rich QuarkXPress version 3.3, released in 1992, and version 4.0, released in 1996. In 1999, Quark announced its offer to buy Adobe and to divest the combined company of PageMaker to avoid problems under United States antitrust law. Adobe declined Quark's offer and continued to develop a new desktop publishing application. Aldus had begun developing a successor to PageMaker, code-named "Shuksan". Later, Adobe code-named the project "K2", and Adobe released InDesign 1.0 in 1999. InDesign exports documents in Adobe's Portable Document Format (PDF) and supports multiple languages. It was the first DTP application to support Unicode character sets, advanced typography with OpenType fonts, advanced transparency features, layout styles, optical margin alignment, and cross-platform scripting with JavaScript. Later versions of the software introduced new file formats. To support the new features, especially typography, introduced with InDesign CS, the program and its document format are not backward-compatible. Instead, InDesign CS2 introduced the INX (.inx) format, an XML-based document representation, to allow backward compatibility with future versions. InDesign CS versions updated with the 3.1 April 2005 update can read InDesign CS2-saved files exported to the .inx format. The InDesign Interchange format does not support versions earlier than InDesign CS. With InDesign CS4, Adobe replaced INX with InDesign Markup Language (IDML), another XML-based document representation. InDesign was the first native Mac OS X publishing software. With the third major version, InDesign CS, Adobe increased InDesign's distribution by bundling it with Adobe Photoshop, Adobe Illustrator, and Adobe Acrobat in Adobe Creative Suite. Adobe developed InDesign CS3 (and Creative Suite 3) as universal binary software compatible with native Intel and PowerPC Macs in 2007, two years after the announced 2005 schedule, inconveniencing early adopters of Intel-based Macs. Adobe CEO Bruce Chizen said, "Adobe will be first with a complete line of universal applications." == File format == The MIME type is not official File Open formats: indd, indl, indt, indb, inx, idml, pmd, xqx New File formats: indd, indl, indb File Save As formats: indd, indt Save file format for InCopy: icma (Assignment file) icml (Content file, Exported file) icap (Package for InCopy) idap (Package for InDesign) File Export formats: pdf, idml, icml, eps, jpg, txt, XML, rtf == Versions == Newer versions can, as a rule, open files created by older versions, but the reverse is not true. Current versions can export the InDesign file as an IDML file (InDesign Markup Language), which can be opened by InDesign versions from CS4 upwards; older versions from CS4 down can export to an INX file (InDesign Interchange format). === Server version === In October 2005, Adobe released InDesign Server CS2, a modified version of InDesign (without a user interface) for Windows and Macintosh server platforms. It does not provide any editing client; rather, it is for use by developers in creating client-server solutions with the InDesign plug-in technology. In March 2007 Adobe officially announced Adobe InDesign CS3 Server as part of the Adobe InDesign family. == Features == Paragraph styles are an essential tool for designers when working with text in Adobe InDesign. Despite their menacing appearance, they are straightforward to operate. Other features that make InDesign a good tool for working with text and paragraphs include: Creating frames and shapes Aligning objects with grids and guides Manipulating objects Organizing objects Importing text Formatting text Spell checking Importing images Parent pages (formerly master pages) Paragraph styles == Internationalization and localization == InDesign Middle Eastern editions have unique settings for laying out Arabic or Hebrew text. They feature: Text settings: Special settings for laying out Arabic or Hebrew text, such as: Ability to use Arabic, Persian or Hindi digits; Use kashidas for letter spacing and full justification; Ligature option; Adjust the position of diacritics, such as vowels of the Arabic script; Justify text in three possible ways: Standard, Arabic, Naskh; Option to insert special characters, including Geresh, Gershayim, Maqaf for Hebrew and Kashida for Arabic texts; Apply standard, Arabic, or Hebrew styles for page, paragraph, and footnote numbering. Bi-directional text flow: Right-to-left behavior applies to several objects: Story, paragraph, character, and table. It allows mixing right-to-left and left-to-right words, paragraphs, and stories in a document. Changing the direction of neutral characters (e.g., / or ?) is possible according to the user's keyboard language. Table of contents: Provides a table of contents titles, one for each supported language. This table is sorted according to the chosen language. InDesign CS4 Middle Eastern versions allow users to select the language of the index title and cross-references. Indices: This allows the creation of a simple keyword index or a somewhat more detailed index of the information in the text using embedded indexing codes. Unlike more sophisticated programs, InDesign cannot insert character style information as part of an index entry (e.g., when indexing book, journal, or movie titles). Indices are limited to four levels (the top level and three sub-levels). Like tables of contents, indices can be sorted according to the selected language. Importing and exporting: Can import QuarkXPress files up to version 4.1 (1999), even using Arabic XT, Arabic Phonyx, or Hebrew XPressWay fonts, retaining the layout and content. Includes 50 import/export filters, including a Microsoft Word 97-98-2000 import filter and a plain text import filter. Exports IDML files can be read by QuarkXPress 2017. Reverse layout: Include a reverse layout feature to reverse the layout of a document when converting a left-to-right document to a right-to-left one or vice versa. Complex script rendering: InDesign supports Unicode character encoding, and Middle Eastern editions support complex text layouts for Arabic and Hebrew complex scripts. The underlying Arabic and Hebrew support is present in the Western editions of InDesign CS4, CS5, CS5.5, and CS6, but the user interface is not exposed, making it difficult to access.
Read more →
Automatic image annotation

Automatic image annotation (also known as automatic image tagging or linguistic indexing) is the process by which a computer system automatically assigns metadata in the form of captioning or keywords to a digital image. This application of computer vision techniques is used in image retrieval systems to organize and locate images of interest from a database. This method can be regarded as a type of multi-class image classification with a very large number of classes - as large as the vocabulary size. Typically, image analysis in the form of extracted feature vectors and the training annotation words are used by machine learning techniques to attempt to automatically apply annotations to new images. The first methods learned the correlations between image features and training annotations. Subsequently, techniques were developed using machine translation to attempt to translate the textual vocabulary into the 'visual vocabulary,' represented by clustered regions known as blobs. Subsequent work has included classification approaches, relevance models, and other related methods. The advantages of automatic image annotation versus content-based image retrieval (CBIR) are that queries can be more naturally specified by the user. At present, Content-Based Image Retrieval (CBIR) generally requires users to search by image concepts such as color and texture or by finding example queries. However, certain image features in example images may override the concept that the user is truly focusing on. Traditional methods of image retrieval, such as those used by libraries, have relied on manually annotated images, which is expensive and time-consuming, especially given the large and constantly growing image databases in existence.
Read more →
Automated journalism

Automated journalism, also known as algorithmic journalism or robot journalism, is a term that attempts to describe modern technological processes that are now in use in the journalistic profession, such as news articles and videos generated by computer programs. There are four main fields of application for automated journalism, namely automated content production, data mining, news dissemination and content optimization. Through generative artificial intelligence, stories are produced automatically by computers rather than human reporters. In the 2020s, generative pre-trained transformers have enabled the generation of articles, simply by providing prompts. Automated journalism is sometimes seen as an opportunity to free journalists from routine reporting, providing them with more time for complex tasks. It also allows efficiency and cost-cutting, alleviating some financial burden that many news organizations face. However, automated journalism is also perceived as a threat to the authorship and quality of news and a threat to the livelihoods of human journalists. == History == Historically, the process involved an algorithm that scanned large amounts of provided data, selected from an assortment of pre-programmed article structures, ordered key points, and inserted details such as names, places, amounts, rankings, statistics, and other figures. These programs interpret, organize, and present data in human-readable ways. The output can also be customized to fit a certain voice, tone, or style. Early implementations were mainly used for stories based on statistics and numerical figures. Common topics include sports recaps, weather, financial reports, real estate analysis, and earnings reviews. Data science and AI companies such as Automated Insights, Narrative Science, United Robots and Monok develop and provide these algorithms to news outlets. In 2016, early adopters included news providers such as the Associated Press, Forbes, ProPublica, and the Los Angeles Times. StatSheet, an online platform covering college basketball, runs entirely on an automated program. In 2006, Thomson Reuters announced their switch to automation to generate financial news stories on its online news platform. Reuters used a tool called Tracer. An algorithm called Quakebot published a story about a 2014 California earthquake on The Los Angeles Times website within three minutes after the shaking had stopped. The Associated Press began using automation to cover 10,000 minor baseball leagues games annually, using a program from Automated Insights and statistics from MLB Advanced Media. Outside of sports, the Associated Press also uses automation to produce stories on corporate earnings. Since 2014, Associated Press has been publishing quarterly financial stories with help from Automated Insights. In May 2020, Microsoft announced that a number of its MSN contract journalists would be replaced by robot journalism. On 8 September 2020, The Guardian published an article entirely written by the neural network GPT-3, although the published fragments were manually picked by a human editor. Agentic Tribune produces all of its news articles automatically using AI. News broadcasters in Kuwait, Greece, South Korea, India, China and Taiwan have presented news with anchors based on generative AI models, prompting concerns about job losses for human anchors and audience trust in news that has historically been influenced by parasocial relationships with broadcasters, content creators or social media influencers. Algorithmically generated anchors have also been used by allies of ISIS for their broadcasts. In 2023, Google reportedly pitched a tool to news outlets that claimed to "produce news stories" based on input data provided, such as "details of current events". Some news company executives who viewed the pitch described it as "[taking] for granted the effort that went into producing accurate and artful news stories." In February 2024, Google launched a program to pay small publishers to write three articles per day using a beta generative AI model. The program does not require the knowledge or consent of the websites that the publishers are using as sources, nor does it require the published articles to be labeled as being created or assisted by these models. Meta AI, a chatbot based on Llama 3 which summarizes news stories, was noted by The Washington Post to copy sentences from those stories without direct attribution and to potentially further decrease the traffic of online news outlets. == Benefits == === Speed === Robot reporters are built to produce large quantities of information at quicker speeds. The Associated Press announced that their use of automation has increased the volume of earnings reports from customers by more than ten times. With software from Automated Insights and data from other companies, they can produce 150 to 300-word articles in the same time it takes journalists to crunch numbers and prepare information. By automating routine stories and tasks, journalists are promised more time for complex jobs such as investigative reporting and in-depth analysis of events. Francesco Marconi of the Associated Press stated that, through automation, the news agency freed up 20 percent of reporters’ time to focus on higher-impact projects. This has also been stated by a spokesperson at Gannett, who stated "By leveraging AI, we are able to expand coverage and enable our journalists to focus on more in-depth reporting." GBH reports that AI tools help increase the reach of news publishers. Mike Carragi, a product manager at Patch, stated that they were able to increase their reach from 1200 communities to 7000 communities in just a few months without the need for new employees solely through the adoption of generative AI. In fact, many communities are served solely by AI generated content, which creates summaries of existing information within the community. === Cost === Automated journalism is cheaper because more content can be produced within less time. It also lowers labour costs for news organizations. Reduced human input means less expenses on wages or salaries, paid leaves, vacations, and employment insurance. Automation serves as a cost-cutting tool for news outlets struggling with tight budgets but still wish to maintain the scope and quality of their coverage. == Concerns == === Authorship === In an automated story, there is often confusion about who should be credited as the author. Several participants of a study on algorithmic authorship attributed the credit to the programmer; others perceived the news organization as the author, emphasizing the collaborative nature of the work. There is also no way for the reader to verify whether an article was written by a robot or human, which raises issues of transparency although such issues also arise with respect to authorship attribution between human authors too. === Credibility and quality === Concerns about the perceived credibility of automated news is similar to concerns about the perceived credibility of news in general. Critics doubt if algorithms are "fair and accurate, free from subjectivity, error, or attempted influence." Again, these issues about fairness, accuracy, subjectivity, error, and attempts at influence or propaganda has also been present in articles written by humans over thousands of years. A common criticism is that machines do not replace human capabilities such as creativity, humour, and critical-thinking. However, as the technology evolves, the aim is to mimic human characteristics. When the UK's Guardian newspaper used an AI to write an entire article in September 2020, commentators pointed out that the AI still relied on human editorial content. Austin Tanney, the head of AI at Kainos said: "The Guardian got three or four different articles and spliced them together. They also gave it the opening paragraph. It doesn’t belittle what it is. It was written by AI, but there was human editorial on that." The largest single study of readers' evaluations of news articles produced with and without the help of automation exposed 3,135 online news consumers to 24 articles. It found articles that had been automated were significantly less comprehensible, in part because they were considered to contain too many numbers. However, the automated articles were evaluated equally on other criteria including tone, narrative flow, and narrative structure. Beyond human evaluation, there are now numerous algorithmic methods to identify machine written articles although some articles may still contain errors that are obvious for a human to identify, they can at times score better with these automatic identifiers than human-written articles. A 2017 Nieman Reports article by Nicola Bruno discusses whether or not machines will replace journalists and addresses concerns around the concept of automated journalism practices. Ultimately, Bruno came to the conclusion that AI would assist journalist
Read more →
Education by algorithm

Education by algorithm refers to automated solutions that algorithmic agents or social bots offer to education, to assist with mundane educational tasks. These are often instrumentalist “educational reforms” or “curriculum transformations”, which have been implemented by policy makers and are supported by proprietary education technologies. New educational policies, mandated by transnational governance forums (like the OECD), have manufactured a connection between economies and education. Governments, schools and universities are expected to introduce or prepare students for an “unknown future”, to “future proof” them against an identified issue or to mitigate a national crisis. Technologies are seen as a catalyst to effect these changes. However, these policies mask a deeper problem, which include the assetization of education and the use of technologies as a means for surveillance and behavior modification. The traces that students and leave, through cookies, logins learning activities, assignments and tests, are collected, facetted, and shared with commercial organizations by these agents, to both predict future behavior and shape it. Techno solutionist thinking has led to managers adopting educational policies and reforms, and looking towards technologies to act as disrupters, liberators or agents to improve efficiency. During the COVID-19 pandemic, many more students had to modify their learning and working circumstances to protect themselves. Academics shifted their assessment practices from the dominant assessment of learning paradigm to an orientation that saw value in "assessment for learning". Big tech assisted, and teaching infrastructure became further privatized, and unbundling of education provision went a step further. Following the return to class, this assessment paradigm became rationalised in education. Leaving the space for algorithmic agents to step in. Academics work was increasingly driven by learning experience platforms and student understanding was extended through interleaving, behavior modification nudges and rewards and scheduled high stakes assessments. This data collection may also be construed as surveillance., or perceived as evidence of a Fourth Industrial Revolution
Read more →
Friendica

Friendica (formerly Friendika, originally Mistpark) is a free and open-source software distributed social network. It forms one part of the Fediverse, an interconnected and decentralized network of independently operated servers. == Features == Friendica users can connect with others via their own Friendica server, but may also fully integrate contacts from other platforms including Diaspora, Pump.io, GNU social, email, Discourse and more recently ActivityPub (including Mastodon, Pleroma and Pixelfed) and Bluesky into their 'newsfeed'. In addition to these two way connections, users can also use Friendica as a publishing platform to post content to WordPress, Tumblr, Insanejournal and Libertree. Posting to Google+ was also supported until that service was shut down. In addition, RSS feeds can be ingested. Because users are distributed across many servers, their "addresses" consist of a username, the "@" symbol, and the domain name of the Friendica instance in the same manner email addresses are formed. Twitter support was available but was deprecated due to API changes under Elon Musk's leadership rendering it unusable. Most of the functionality from major microblogging and social networking platforms are available in Friendica; for example, tagging users and groups via "@ mentions"; direct messages; hashtags; photo albums; "likes"; "dislikes"; comments; and re-shares of publicly visible posts. Published items can be edited and updated across the network. Comprehensive settings for privacy and the public visibility of posts allow users to regulate who can read which contributions, or see specific information about the user. Users can also create multiple profiles, allowing different groups of people (such as friends, or work mates) to see a different profile entirely when viewing the same page. User accounts can be downloaded or deleted, and can be imported to a different Friendica server if so required. Public forums can be created under different accounts, which can be switched between if the accounts are registered with the same email address. == Development == There is no corporation behind Friendica. The developers work on a voluntary basis and the project is run informally; the platform itself is used for the communication between the developers. There are different forums within Friendica, such as "Friendica Developers" and "Friendica Support". The source code of Friendica is hosted on GitHub. == Installation == The developers aim to make installation of the software as simple as possible for technical laymen. They argue that decentralization on small servers is a key condition for the freedom of users and their self-determination. The difficulty level is similar to an installation of WordPress. However, the installing on shared hosting is sometimes difficult because of missing PHP5 modules. Some volunteers also run public servers so that newcomers can also avoid the installation of their own software. == List of clients == Friendica implements multiple client-server API variants simultaneously. Along with endpoints needed to use enhanced Friendica features, it also implements the API used by GNU social, Twitter and since version 2021.06 also the one used by Mastodon. As a result, most GNU social and Mastodon clients can be used for Friendica. Examples of Friendica compatible clients include: Raccoon for Friendica, Friendiqa, Fedilab, AndStatus, Twidere and DiCa for Android, friendly for Sailfish OS, friclicli (CLI client), choqok and Friendiqa for Linux and Friendica Mobile for Windows 10. == Reception == Friendica was cited in January 2012 by Infoshop News as an "alternative to Google+ and Facebook" to be used on the Occupy Nigeria movement. In January 2012 Free Software Foundation Europe's blog cited Friendica as a reasonable alternative to centralized and controlled social networks such as Facebook or Google+. Biblical Notes writer J. Randal Matheny described Friendica in January 2012 as "One social networking option flying under the radar until recently deserves consideration as an already stable platform with a wide range of options, applications, plug-ins, and possibilities for opening up the Internet." In February 2012, the German computer magazine c't wrote: "Friendica demonstrates how decentralized social networks can become widely accepted." Another German publication, the professional magazine t3n listed Friendica as a Facebook rival in an online article in March 2012 about Facebook alternatives. It compared Friendica with similar social networks like Diaspora and identi.ca. MSN Tech & Gadgets contributor Emma Boyes wrote about Friendica in May 2012: "why you'll love it: you can use it to access all the other social networks and get recommendations of new friends and groups to join. Friendica is open source and decentralised. There's no corporation behind it and there are extensive privacy settings. You can choose from a variety of user interfaces and it boasts some cool features—for instance, being able to key in a list of your interests and use the 'profile match' feature to recommend other users who share them with you. A word of warning, though, the site is not as user-friendly as the others on this list, so it may be this one is one for the geeks." == Later reviews == Acquisition of Twitter by Elon Musk had revitalized public interest in Fediverse technologies in April 2022. Friendica received favorable reviews, with a PCMag article describing it as "mostly comparable to Facebook", drawing a parallel to Google+ and highlighting using it "for planning events, and its multiple profile feature means you can show a different face to your friends, coworkers, and family". The September 2022 issue of Linux Magazine contains a detailed comparison and walk-through of registering to and using basic functions of Diaspora, Friendica and Mastodon. They describe Friendica as "intuitive" and highlight the "huge choice of account settings" and that "Friendica does not require any specific hardware, so you can use an old computer system as a server." == Vulnerabilities == In September 2020, a hotfix was released to patch a security vulnerability that could leak sensitive information from the server environment since versions released in April 2019 (develop branch) and June 2019 (stable).
Read more →
Single-source publishing

Single-source publishing, also known as single-sourcing publishing, is a content management method which allows the same source content to be used across different forms of media and more than one time. The labor-intensive and expensive work of editing need only be carried out once, on only one document; that source document (the single source of truth) can then be stored in one place and reused. This reduces the potential for error, as corrections are only made one time in the source document. The benefits of single-source publishing primarily relate to the editor rather than the user. The user benefits from the consistency that single-sourcing brings to terminology and information. This assumes the content manager has applied an organized conceptualization to the underlying content (A poor conceptualization can make single-source publishing less useful). Single-source publishing is sometimes used synonymously with multi-channel publishing though whether or not the two terms are synonymous is a matter of discussion. == Definition == While there is a general definition of single-source publishing, there is no single official delineation between single-source publishing and multi-channel publishing, nor are there any official governing bodies to provide such a delineation. Single-source publishing is most often understood as the creation of one source document in an authoring tool and converting that document into different file formats or human languages (or both) multiple times with minimal effort. Multi-channel publishing can either be seen as synonymous with single-source publishing, or similar in that there is one source document but the process itself results in more than a mere reproduction of that source. == History == The origins of single-source publishing lie, indirectly, with the release of Windows 3.0 in 1990. With the eclipsing of MS-DOS by graphical user interfaces, help files went from being unreadable text along the bottom of the screen to hypertext systems such as WinHelp. On-screen help interfaces allowed software companies to cease the printing of large, expensive help manuals with their products, reducing costs for both producer and consumer. This system raised opportunities as well, and many developers fundamentally changed the way they thought about publishing. Writers of software documentation did not simply move from being writers of traditional bound books to writers of electronic publishing, but rather they became authors of central documents which could be reused multiple times across multiple formats. The first single-source publishing project was started in 1993 by Cornelia Hofmann at Schneider Electric in Seligenstadt, using software based on Interleaf to automatically create paper documentation in multiple languages based on a single original source file. XML, developed during the mid- to late-1990s, was also significant to the development of single-source publishing as a method. XML, a markup language, allows developers to separate their documentation into two layers: a shell-like layer based on presentation and a core-like layer based on the actual written content. This method allows developers to write the content only one time while switching it in and out of multiple different formats and delivery methods. In the mid-1990s, several firms began creating and using single-source content for technical documentation (Boeing Helicopter, Sikorsky Aviation and Pratt & Whitney Canada) and user manuals (Ford owners manuals) based on tagged SGML and XML content generated using the Arbortext Epic editor with add-on functions developed by a contractor. The concept behind this usage was that complex, hierarchical content that did not lend itself to discrete componentization could be used across a variety of requirements by tagging the differences within a single document using the capabilities built into SGML and XML. Ford, for example, was able to tag its single owner's manual files so that 12 model years could be generated via a resolution script running on the single completed file. Pratt & Whitney, likewise, was able to tag up to 20 subsets of its jet engine manuals in single-source files, calling out the desired version at publication time. World Book Encyclopedia also used the concept to tag its articles for American and British versions of English. Starting from the early 2000s, single-source publishing was used with an increasing frequency in the field of technical translation. It is still regarded as the most efficient method of publishing the same material in different languages. Once a printed manual was translated, for example, the online help for the software program which the manual accompanies could be automatically generated using the method. Metadata could be created for an entire manual and individual pages or files could then be translated from that metadata with only one step, removing the need to recreate information or even database structures. Although single-source publishing is now decades old, its importance has increased urgently as of the 2010s. As consumption of information products rises and the number of target audiences expands, so does the work of developers and content creators. Within the industry of software and its documentation, there is a perception that the choice is to embrace single-source publishing or render one's operations obsolete. == Criticism == Editors using single-source publishing have been criticized for below-standard work quality, leading some critics to describe single-source publishing as the "conveyor belt assembly" of content creation. While heavily used in technical translation, there are risks of error in regard to indexing. While two words might be synonyms in English, they may not be synonyms in another language. In a document produced via single-sourcing, the index will be translated automatically and the two words will be rendered as synonyms. This is because they are synonyms in the source language, while in the target language they are not.
Read more →
Informationist

An informationist (or information specialist in context) provides research and knowledge management services in the context of clinical care or biomedical research. Although there is no one educational pathway or formalized set of skills or knowledge for informationists, one way to think of the informationist is as one who possesses the knowledge and skill of a medical librarian with extensive research specialization and some formal clinical or public health education that goes beyond on-the-job osmosis. Medical librarians and other biomedical professional organizations have been exploring the possibilities for evaluating how informationists are being used and whether their activities supplement or replace medical library activity. More generally, an informationist is a professional who works with information within a particular business, analytic or scientific context to drive toward outcomes based on evidence, analysis, prediction and execution. For example, an extension of the term is increasingly emerging in financial services, life sciences and health care industries. Though still nascently in use, its adoption applies to individuals with extensive industry expertise, acute familiarity with organizational structures and processes, deep domain level information mastery and information systems technical savvy. Informationists in this context support transformational initiatives within and across functional areas of an enterprise as architects, governance experts, continuous improvement advocates and strategists. == Background == The term was proposed in 2000 by Davidoff & Florance. Their editorial suggested that physicians should be delegating their information needs to informationists, just as they currently order CT scans from radiologists or cardiac catheterizations from cardiologists. They conceived of an information professional who was embedded in (and indeed, supported by) the clinical departments. Supporters of the concept see it as a means for librarians to reinvigorate connections with the faculty/clinicians, as well as provide superior service by dint of informationists' biomedical training. Critics complained that the idea is nothing new; librarians already provide in-depth, high quality information services and clinical medical librarians have been working alongside physicians, nurses and other clinicians for years. Large informationist programs in the U.S. exist at the National Institutes of Health and at Vanderbilt University. Welch Medical Library at Johns Hopkins University (JHU) is developing an informationist service model in which its 10 clinical and public health librarians are moving from serving as liaison librarians for assigned departments toward becoming embedded informationists within their departments. To prepare for the embedded informationist role, librarians are undertaking education as needed to supplement their backgrounds. For example, librarians bring experience in clinical behavior counseling, public health, nursing, and more. Informationist training can then focus upon filling gaps in research methods knowledge more so than on gaining additional knowledge in the librarian's area of expertise. Courses, seminars and workshops being undertaken include those covering systematic reviews, evidence-based medicine, critical appraisal, medical language, anatomy and physiology, biostatistics, and clinical research. The term informationist is related to that of informatician—also informaticist—and many informationists do possess skills in clinical topics, bioinformatics, and biomedical informatics. Harvard University, the University of Pittsburgh, and Washington University in St. Louis are examples of institutional libraries which have hired PhD-level scientists (who may or may not have library degrees) to provide informatics support for biomedical research.
Read more →