AI App Builder Free Unlimited

AI App Builder Free Unlimited — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Incremental heuristic search

    Incremental heuristic search

    Incremental heuristic search algorithms combine both incremental and heuristic search to speed up searches of sequences of similar search problems, which is important in domains that are only incompletely known or change dynamically. Incremental search has been studied at least since the late 1960s. Incremental search algorithms reuse information from previous searches to speed up the current search and solve search problems potentially much faster than solving them repeatedly from scratch. Similarly, heuristic search has also been studied at least since the late 1960s. Heuristic search algorithms, often based on A, use heuristic knowledge in the form of approximations of the goal distances to focus the search and solve search problems potentially much faster than uninformed search algorithms. The resulting search problems, sometimes called dynamic path planning problems, are graph search problems where paths have to be found repeatedly because the topology of the graph, its edge costs, the start vertex or the goal vertices change over time. So far, three main classes of incremental heuristic search algorithms have been developed: The first class restarts A at the point where its current search deviates from the previous one (example: Fringe Saving A). The second class updates the h-values (heuristic, i.e. approximate distance to goal) from the previous search during the current search to make them more informed (example: Generalized Adaptive A). The third class updates the g-values (distance from start) from the previous search during the current search to correct them when necessary, which can be interpreted as transforming the A search tree from the previous search into the A search tree for the current search (examples: Lifelong Planning A, D, D Lite). All three classes of incremental heuristic search algorithms are different from other replanning algorithms, such as planning by analogy, in that their plan quality does not deteriorate with the number of replanning episodes. == Applications == Incremental heuristic search has been extensively used in robotics, where a larger number of path planning systems are based on either D (typically earlier systems) or D Lite (current systems), two different incremental heuristic search algorithms.

    Read more →
  • Ugly duckling theorem

    Ugly duckling theorem

    The ugly duckling theorem is an argument showing that classification is not really possible without some sort of bias. More particularly, it assumes finitely many properties combinable by logical connectives, and finitely many objects; it asserts that any two different objects share the same number of (extensional) properties. The theorem is named after Hans Christian Andersen's 1843 story "The Ugly Duckling", because it shows that a duckling is just as similar to a swan as two swans are to each other. It was derived by Satosi Watanabe in 1969. == Mathematical formula == Suppose there are n things in the universe, and one wants to put them into classes or categories. One has no preconceived ideas or biases about what sorts of categories are "natural" or "normal" and what are not. So one has to consider all the possible classes that could be, all the possible ways of making a set out of the n objects. There are 2 n {\displaystyle 2^{n}} such ways, the size of the power set of n objects. One can use that to measure the similarity between two objects, and one would see how many sets they have in common. However, one cannot. Any two objects have exactly the same number of classes in common if we can form any possible class, namely 2 n − 1 {\displaystyle 2^{n-1}} (half the total number of classes there are). To see this is so, one may imagine each class is represented by an n-bit string (or binary encoded integer), with a zero for each element not in the class and a one for each element in the class. As one finds, there are 2 n {\displaystyle 2^{n}} such strings. As all possible choices of zeros and ones are there, any two bit-positions will agree exactly half the time. One may pick two elements and reorder the bits so they are the first two, and imagine the numbers sorted lexicographically. The first 2 n / 2 {\displaystyle 2^{n}/2} numbers will have bit #1 set to zero, and the second 2 n / 2 {\displaystyle 2^{n}/2} will have it set to one. Within each of those blocks, the top 2 n / 4 {\displaystyle 2^{n}/4} will have bit #2 set to zero and the other 2 n / 4 {\displaystyle 2^{n}/4} will have it as one, so they agree on two blocks of 2 n / 4 {\displaystyle 2^{n}/4} or on half of all the cases, no matter which two elements one picks. So if we have no preconceived bias about which categories are better, everything is then equally similar (or equally dissimilar). The number of predicates simultaneously satisfied by two non-identical elements is constant over all such pairs. Thus, some kind of inductive bias is needed to make judgements to prefer certain categories over others. === Boolean functions === Let x 1 , x 2 , … , x n {\displaystyle x_{1},x_{2},\dots ,x_{n}} be a set of vectors of k {\displaystyle k} booleans each. The ugly duckling is the vector which is least like the others. Given the booleans, this can be computed using Hamming distance. However, the choice of boolean features to consider could have been somewhat arbitrary. Perhaps there were features derivable from the original features that were important for identifying the ugly duckling. The set of booleans in the vector can be extended with new features computed as boolean functions of the k {\displaystyle k} original features. The only canonical way to do this is to extend it with all possible Boolean functions. The resulting completed vectors have 2 k {\displaystyle 2^{k}} features. The ugly duckling theorem states that there is no ugly duckling because any two completed vectors will either be equal or differ in exactly half of the features. Proof. Let x and y be two vectors. If they are the same, then their completed vectors must also be the same because any Boolean function of x will agree with the same Boolean function of y. If x and y are different, then there exists a coordinate i {\displaystyle i} where the i {\displaystyle i} -th coordinate of x {\displaystyle x} differs from the i {\displaystyle i} -th coordinate of y {\displaystyle y} . Now the completed features contain every Boolean function on k {\displaystyle k} Boolean variables, with each one exactly once. Viewing these Boolean functions as polynomials in k {\displaystyle k} variables over GF(2), segregate the functions into pairs ( f , g ) {\displaystyle (f,g)} where f {\displaystyle f} contains the i {\displaystyle i} -th coordinate as a linear term and g {\displaystyle g} is f {\displaystyle f} without that linear term. Now, for every such pair ( f , g ) {\displaystyle (f,g)} , x {\displaystyle x} and y {\displaystyle y} will agree on exactly one of the two functions. If they agree on one, they must disagree on the other and vice versa. (This proof is believed to be due to Watanabe.) == Discussion == A possible way around the ugly duckling theorem would be to introduce a constraint on how similarity is measured by limiting the properties involved in classification, for instance, between A and B. However Medin et al. (1993) point out that this does not actually resolve the arbitrariness or bias problem since in what respects A is similar to B: "varies with the stimulus context and task, so that there is no unique answer, to the question of how similar is one object to another". For example, "a barberpole and a zebra would be more similar than a horse and a zebra if the feature striped had sufficient weight. Of course, if these feature weights were fixed, then these similarity relations would be constrained". Yet the property "striped" as a weight 'fix' or constraint is arbitrary itself, meaning: "unless one can specify such criteria, then the claim that categorization is based on attribute matching is almost entirely vacuous". Stamos (2003) remarked that some judgments of overall similarity are non-arbitrary in the sense they are useful: "Presumably, people's perceptual and conceptual processes have evolved that information that matters to human needs and goals can be roughly approximated by a similarity heuristic... If you are in the jungle and you see a tiger but you decide not to stereotype (perhaps because you believe that similarity is a false friend), then you will probably be eaten. In other words, in the biological world stereotyping based on veridical judgments of overall similarity statistically results in greater survival and reproductive success." Unless some properties are considered more salient, or 'weighted' more important than others, everything will appear equally similar, hence Watanabe (1986) wrote: "any objects, in so far as they are distinguishable, are equally similar". In a weaker setting that assumes infinitely many properties, Murphy and Medin (1985) give an example of two putative classified things, plums and lawnmowers: "Suppose that one is to list the attributes that plums and lawnmowers have in common in order to judge their similarity. It is easy to see that the list could be infinite: Both weigh less than 10,000 kg (and less than 10,001 kg), both did not exist 10,000,000 years ago (and 10,000,001 years ago), both cannot hear well, both can be dropped, both take up space, and so on. Likewise, the list of differences could be infinite… any two entities can be arbitrarily similar or dissimilar by changing the criterion of what counts as a relevant attribute." According to Woodward, the ugly duckling theorem is related to Schaffer's Conservation Law for Generalization Performance, which states that all algorithms for learning of boolean functions from input/output examples have the same overall generalization performance as random guessing. The latter result is generalized by Woodward to functions on countably infinite domains.

    Read more →
  • Lexxe

    Lexxe

    Lexxe is an internet search engine that applies Natural Language Processing in its semantic search technology. Founded in 2005 by Dr. Hong Liang Qiao, Lexxe is based in Sydney, Australia. Today, Lexxe's key focus is on sentiment search with the launch of a news sentiment search site at News & Moods (www.newsandmoods.com). Lexxe has experienced several stages of change of focus in search technology: Lexxe launched its Alpha version in 2005, featuring Natural Language question answering (i.e. users could ask questions in English to the search engine apart from keyword searches — this feature has been suspended for redevelopment since 2010). It used only algorithms to extract answers from web pages, with no question-answer pair databases prepared in advance. In 2011, Lexxe launched a beta version with a new search technology called Semantic Key. Semantic Keys enable users to query with a conceptual keyword (or a keyword with a special meaning, hence the term Semantic Key) in order to find instances under the concept, e.g. price → $5.95 or €200, color → red, yellow, white. For example, “price: a pound of apples”, “color: ferrari”. With initial 500 Semantic Keys at the Beta launch, Lexxe became the first search engine in the world to offer this unique and useful search technology to the users. The cost of building Semantic Keys was too heavy though. In 2017, Lexxe launched News & Moods (www.newsandmoods.com), an open platform for news sentiment search, a first step towards sentiment search feature for the entire Internet search in Lexxe search engine. News & Moods also comes with smartphone apps in Android and iOS.

    Read more →
  • Elastix (image registration)

    Elastix (image registration)

    Elastix is an image registration toolbox built upon the Insight Segmentation and Registration Toolkit (ITK). It is entirely open-source and provides a wide range of algorithms employed in image registration problems. Its components are designed to be modular to ease a fast and reliable creation of various registration pipelines tailored for case-specific applications. It was first developed by Stefan Klein and Marius Staring under the supervision of Josien P.W. Pluim at Image Sciences Institute (ISI). Its first version was command-line based, allowing the final user to employ scripts to automatically process big data-sets and deploy multiple registration pipelines with few lines of code. Nowadays, to further widen its audience, a version called SimpleElastix is also available, developed by Kasper Marstal, which allows the integration of elastix with high level languages, such as Python, Java, and R. == Image registration fundamentals == Image registration is a well-known technique in digital image processing that searches for the geometric transformation that, applied to a moving image, obtains a one-to-one map with a target image. Generally, the images acquired from different sensors (multimodal), time instants (multitemporal), and points of view (multiview) should be correctly aligned to proceed with further processing and feature extraction. Even though there are a plethora of different approaches to image registration, the majority is composed of the same macro building blocks, namely the transformation, the interpolator, the metric, and the optimizer. Registering two or more images can be framed as an optimization problem that requires multiple iterations to converge to the best solution. Starting from an initial transformation computed from the image moments the optimization process searches for the best transformation parameters based on the value of the selected similarity metric. The figure on the right shows the high-level representation of the registration of two images, where the reference remains constant during the entire process, while the moving one will be transformed according to the transformation parameters. In other words, the registration ends when the similarity metric, which is a mathematical function with a certain number of parameters to be optimized, reaches the optimal value which is highly dependent on the specific application. == Main building blocks == Following the structure of the image registration workflow, the elastix toolbox proposes a modular solution that implements for each of the building blocks different algorithms, highly employed in medical image registration, and helps the final users to build their specific pipeline by selecting the most suitable algorithm for each of the main building blocks. Each block is easily configurable both by selecting pre-defined initialization values or by trying multiple sets of parameters and then choosing the most performing one. The registration is performed on images, and the elastix toolbox supports all the data formats supported by ITK, ranging from JPEG and PNG to medical standard formats such as DICOM and NIFTI. It also stores physical pixel spacing, the origin and the relative position to an external world reference system, when provided in the metadata, to facilitate the registration process, especially in medical field applications. === Transformation === The transformation is an essential building block, since it defines the allowable transformations. In image registration, the main distinction can be done between parallel-to-parallel and parallel-to-non parallel (deformable) line mapping transformations. In the elastix toolbox, the final users can select one transformation or compose more transformations either through addition or via composition. Below are reported the different transformation models in order of increasing flexibility, along with the corresponding elastix class names between brackets. Translation (TranslationTransform) allows only translations Rigid (EulerTransform) expands the translation adding rotations and the object is seen as a rigid body Similarity (SimilarityTransform) expands the rigid transformation by introducing isotropic scaling Affine (AffineTransform) expands the rigid transformation allowing both scaling and shear B-splines (BSplineTransform) is a deformable transformation usually preceded by a rigid or affine one Thin-plate splines (SplineKernelTransform) is a deformable transformation belonging to the class of kernel-based transformations that is a composition of and affine and a non-rigid part === Metric === The similarity metric is the mathematical function whose parameters should be optimized to reach the desired registration, and, during the process, it is computed multiple times. Below are reported the available metrics computed employing the reference and the transformed images and the corresponding elastix class names between brackets. Mean squared difference (AdvancedMeanSquares) to be used for mono-modal applications Normalized correlation coefficient (AdvancedNormalizedCorrelation) to be used for images that have an intensity linear relationship Mutual information (AdvancedMattesMutualInformation) to be used for both mono- and multi-modal applications and optimized to reach better performance compared to the normalized version Normalized mutual information (NormalizedMutualInformation) for both mono- and multi-modal applications Kappa statistic (AdvancedKappaStatistic) to be used only for binary images === Sampler === For the computation of the similarity metrics, it is not always necessary to consider all the voxels and, sometimes, it can be useful to use only a fraction of the voxels of the images, i.e. to reduce the execution time for big input images. Below are reported the available criteria for selecting a fraction of the voxels for the similarity metric computation and the corresponding elastix class names between brackets. Full (Full) to employ all the voxels Grid (Grid) to employ a regular grid defined by the user to downsample the image Random (Random) to randomly select a percentage of voxels defined by the users (all voxels have equal probability to be selected) Random coordinate (RandomCoordinate) like the random criterion, but in this case also off-grid positions can be selected to simplify the optimization process === Interpolator === After the application of the transformation, it may occur that the voxels used for the similarity metric computation are at non-voxel positions, so intensity interpolation should be performed to ensure the correctness of the computed values. Below are reported the implemented interpolators and the corresponding elastix class names between brackets. Nearest neighbor (NearestNeighborInterpolator) exploits little resources, but gives low quality results Linear (LinearInterpolator) is sufficient in general applications N-th order B-spline (BSplineInterpolator) can be used to increase the order N, increasing quality and computation time. N=0 and N=1 indicate the nearest neighbor and linear cases respectively. === Optimizer === The optimizer defines the strategy employed for searching the best transformation parameter to reach the correct registration, and it is commonly an iterative strategy. Below are reported some of the implemented optimization strategies. Gradient descent Robbins-Monro, similar to the gradient descent, but employing an approximation of the cost function derivatives A wider range of optimizers is also available, such as Quasi-Newton or evolutionary strategies. === Other features === The elastix software also offers other features that can be employed to speed up the registration procedure and to provide more advanced algorithms to the end-users. Some examples are the introduction of blur and Gaussian pyramid to reduce data complexity, and multi-image and multi-metric framework to deal with more complex applications. == Applications == Elastix has applications mainly in the medical field, where image registration is fundamental to get comprehensive information regarding the analysed anatomical region. It is widely employed in image-guided surgery, tumour monitoring, and treatment assessment. For example, in radiotherapy planning, image registration allows to correctly deliver the treatment and evaluate the obtained results. Thanks to the wide range of implemented algorithms, the use of the elastix software allows physicians and researchers to test different registration pipelines from the simplest to more complex ones, and to save the best one as a configuration file. This file and the fact that the software is completely open-source makes it easy to reproduce the work, that can help supporting the open science paradigm, and allows fast reuse on different patients data. In image-guided surgery, registration time and accuracy are critical points, considering that, during the registration, the patient is on the operating table, and the imag

    Read more →
  • Absher (application)

    Absher (application)

    Absher (Arabic: أبشر ‘Absher, roughly meaning "good tidings" or "yes, done") is a smartphone application and web portal which allows citizens and residents of Saudi Arabia to use a variety of governmental services. Amongst several other services with the Absher app, it can be used to apply for jobs and Hajj permits, passport info can be updated, and electronic crimes can be reported. The application provides around 280 services for residents of Saudi Arabia including but not limited to making appointments, renewing passports, residents' cards, IDs, driver's licenses and others, and, controversially, enables Saudi men to track the whereabouts of women they control as part of the country's male guardianship system. The app can be downloaded from the Google Play Store and Apple App Store and is supplied by the Saudi Interior Ministry. According to the Ministry of the Interior, Absher has more than 20 million users. As of February 2019, Absher has been downloaded 4.2 million times from the App Store. Some services provided through Absher can also be accessed through the website absher.sa. In March 2021, Saudi Arabia launched the digital version of the Absher for individuals app through which the users can download a copy of their digital ID. Then, new services were added to the platform such as online birth and death registration services, requesting amendments to academic credentials, correcting names in English and marital status and requesting civil records of children. == Impact on women's rights == The app has been criticized by various human rights activists, human rights organisations and international communities. The US and European countries have also condemned the app and urged the kingdom to end its male guardianship system. Absher gained media attention in 2019 for its functions supporting the Saudi policy of male guardianship following an investigation by Business Insider. The app allows for designated guardians to receive notifications if a woman under their guardianship passes through an airport and subsequently gives them the option to withdraw her right to travel. In a few cases, this system has been circumvented by women who have been able to gain control over its settings and use it to allow themselves to travel. US Senator Ron Wyden of Oregon wrote a letter to the CEO's of Apple and Google, criticizing the app and demanding for its removal immediately. Wyden said "American companies should not enable or facilitate the Saudi government's patriarchy," and called the Saudi system of control over women "abhorrent". According to the EU lawmakers, current rules imposed over the women by the Saudi government make women “second-class citizens”. The lawmakers also asked the EU states to continue to build pressure on Riyadh so as to improve the conditions of women and human rights. Amnesty International and Human Rights Watch accused Apple and Google of helping "enforce gender apartheid" by hosting the app. US congresswomen Rep. Katherine Clark and Rep. Carolyn B. Maloney condemned the kingdom's male guardianship system that reflected from the app, calling Absher a "patriarchal weapon" and asking for its removal. In response to the criticism received by Absher, Apple chief executive officer Tim Cook stated in February 2019 that he intended to investigate the situation. Similarly, Google announced that it would also review the application. After a prompt review, Google declined to remove the app from Google Play, citing that it did not violate the agreed upon terms and conditions of the store. Saudi doctor Khawla Al-Kuraya supported this app an editorial in Bloomberg News. Kuraya wrote that Absher helped Saudi women avoid governmental bureaucracy as it allows their male guardians to process their travel permits anywhere and anytime through Absher. Although she believes that the guardianship system needs to be reconsidered, she thinks that Absher is an important step towards facilitating women-guardians related issues in Saudi Arabia. Absher manager Atiyah Al-Anazy announced in 2019 that two million women were using the application in Saudi Arabia to facilitate their transactions. Some female users stated that the application has made their movement and travel-related issues easier. New measures were introduced that year to allow Saudi women above the age of 18 to travel without their male guardians, which ultimately released male authoritative rights on women. A law was subsequently passed allowing women over the age of 21 to receive a passport and travel without prior male permission.

    Read more →
  • Cyclodisparity

    Cyclodisparity

    In vision science, cyclodisparity is the difference in the rotation angle of an object or scene viewed by the left and right eyes. Cyclodisparity can result from the eyes' torsional rotation (cyclorotation) or can be created artificially by presenting to the eyes two images that need to be rotated relative to each other for binocular fusion to take place. == Human and animal vision == The eyes and visual system can compensate for cyclodisparity up to a certain point; if the cyclodisparity is larger than a threshold, the images cannot be fused, resulting stereoblindness, and in double vision in subjects who otherwise have full stereo vision. When a human subject is presented with images that have artificial cyclodisparity, cyclovergence is evoked, that is, a motor response of the eye muscles that rotates the two eyes in opposite directions, thereby reducing cyclodisparity. Visually-induced cyclovergence of up to 8 degrees has been observed in normal subjects. Furthermore, up to about 8 degrees can usually be compensated by purely sensory means, that is, without physical eye rotation. This means that the normal human observer can achieve binocular image fusion in presence of cyclodisparity of up to approximately 16 degrees. Cyclodisparity due to images having been rotated inward can be compensated better when the gaze is directed downwards, and cyclodisparity due to an outward rotation can be compensated better when the gaze is directed upwards. A proposed explanation for this phenomenon is that the motor system is coordinated in such a way that the eyes perform a torsional movement to reduce the size of the search zones and thus the computational load required for solving the correspondence problem. The resulting cyclovergence at near gaze is smaller than the cyclovergence predicted by Listing's law. == Video processing and computer vision == Active camera torsion can be used in machine and computer vision for several purposes. For instance, camera torsion can be used to make improved use of the search range over which matching detectors or stereo matching algorithms operate, or to make a 3D slanted surface appear frontoparallel for further stereo processing. For image compression purposes, images with cyclodisparity are advantageously encoded using global motion compensation using a rotational motion model.

    Read more →
  • Niki.ai

    Niki.ai

    Niki was an artificial intelligence company headquartered in Bangalore, Karnataka. It was founded in May 2015 by IIT Kharagpur graduates Sachin Jaiswal, Keshav Prawasi, Shishir Modi, and Nitin Babel. The Niki android app was launched for a limited beta in June 2015, then released for public during YourStory's TechSparks 2015, and is a Tech30 company. The company raised an undisclosed amount in seed funding from Unilazer Ventures, a Mumbai-based VC firm founded by Ronnie Screwvala, in October 2015. This was followed by another seed funding round by Ratan Tata in May 2016. The company then raised US$2 million in Series A round of funding from SAP.iO, existing investors and some US and German-based investors, among others. Niki.ai shut down in October 2021 as per media reports. Website not working. == Product == The product is an artificial intelligence-powered chatbot which works as an intelligent personal assistant, named Niki. Leveraging natural language processing and machine learning, Niki presents a chat-based natural language user interface to the users where they can interact with Niki in their natural language. Niki understands how users chat in India, deciphers the words, in the context of product/services that they would like to purchase, and comes up with apt recommendations. Initially, it was only available on the Android platform as a mobile app. The company has expanded its operations to the Facebook Messenger and Apple iOS platforms. The company aims to soon be present on more messaging platforms like Slack and WhatsApp. The company currently provides 20+ services to over 2 million consumers, covering a wide spectrum ranging from utility services like mobile recharge, bill payments, travel services like cabs, buses, hotels and entertainment services like movies and events. Services such as flights and healthcare are also planned. == Partnerships == In September 2017, Infosys Finacle joined with Niki.ai to provide chat-based service to banking customers. In August 2017, Niki partnered with LazyPay to enable a 'buy now, pay later' feature for its users.

    Read more →
  • Eigenface

    Eigenface

    An eigenface ( EYE-gən-) is the name given to a set of eigenvectors when used in the computer vision problem of human face recognition. The approach of using eigenfaces for recognition was developed by Sirovich and Kirby and used by Matthew Turk and Alex Pentland in face classification. The eigenvectors are derived from the covariance matrix of the probability distribution over the high-dimensional vector space of face images. The eigenfaces themselves form a basis set of all images used to construct the covariance matrix. This produces dimension reduction by allowing the smaller set of basis images to represent the original training images. Classification can be achieved by comparing how faces are represented by the basis set. == History == The eigenface approach began with a search for a low-dimensional representation of face images. Sirovich and Kirby showed that principal component analysis could be used on a collection of face images to form a set of basis features. These basis images, known as eigenpictures, could be linearly combined to reconstruct images in the original training set. If the training set consists of M images, principal component analysis could form a basis set of N images, where N < M. The reconstruction error is reduced by increasing the number of eigenpictures; however, the number needed is always chosen less than M. For example, if you need to generate a number of N eigenfaces for a training set of M face images, you can say that each face image can be made up of "proportions" of all the K "features" or eigenfaces: Face image1 = (23% of E1) + (2% of E2) + (51% of E3) + ... + (1% En). In 1991 M. Turk and A. Pentland expanded these results and presented the eigenface method of face recognition. In addition to designing a system for automated face recognition using eigenfaces, they showed a way of calculating the eigenvectors of a covariance matrix such that computers of the time could perform eigen-decomposition on a large number of face images. Face images usually occupy a high-dimensional space and conventional principal component analysis was intractable on such data sets. Turk and Pentland's paper demonstrated ways to extract the eigenvectors based on matrices sized by the number of images rather than the number of pixels. Once established, the eigenface method was expanded to include methods of preprocessing to improve accuracy. Multiple manifold approaches were also used to build sets of eigenfaces for different subjects and different features, such as the eyes. == Generation == A set of eigenfaces can be generated by performing a mathematical process called principal component analysis (PCA) on a large set of images depicting different human faces. Informally, eigenfaces can be considered a set of "standardized face ingredients", derived from statistical analysis of many pictures of faces. Any human face can be considered to be a combination of these standard faces. For example, one's face might be composed of the average face plus 10% from eigenface 1, 55% from eigenface 2, and even −3% from eigenface 3. Remarkably, it does not take many eigenfaces combined together to achieve a fair approximation of most faces. Also, because a person's face is not recorded by a digital photograph, but instead as just a list of values (one value for each eigenface in the database used), much less space is taken for each person's face. The eigenfaces that are created will appear as light and dark areas that are arranged in a specific pattern. This pattern is how different features of a face are singled out to be evaluated and scored. There will be a pattern to evaluate symmetry, whether there is any style of facial hair, where the hairline is, or an evaluation of the size of the nose or mouth. Other eigenfaces have patterns that are less simple to identify, and the image of the eigenface may look very little like a face. The technique used in creating eigenfaces and using them for recognition is also used outside of face recognition: handwriting recognition, lip reading, voice recognition, sign language/hand gestures interpretation and medical imaging analysis. Therefore, some do not use the term eigenface, but prefer to use 'eigenimage'. === Practical implementation === To create a set of eigenfaces, one must: Prepare a training set of face images. The pictures constituting the training set should have been taken under the same lighting conditions, and must be normalized to have the eyes and mouths aligned across all images. They must also be all resampled to a common pixel resolution (r × c). Each image is treated as one vector, simply by concatenating the rows of pixels in the original image, resulting in a single column with r × c elements. For this implementation, it is assumed that all images of the training set are stored in a single matrix T, where each column of the matrix is an image. Subtract the mean. The average image a has to be calculated and then subtracted from each original image in T. Calculate the eigenvectors and eigenvalues of the covariance matrix S. Each eigenvector has the same dimensionality (number of components) as the original images, and thus can itself be seen as an image. The eigenvectors of this covariance matrix are therefore called eigenfaces. They are the directions in which the images differ from the mean image. Usually this will be a computationally expensive step (if at all possible), but the practical applicability of eigenfaces stems from the possibility to compute the eigenvectors of S efficiently, without ever computing S explicitly, as detailed below. Choose the principal components. Sort the eigenvalues in descending order and arrange eigenvectors accordingly. The number of principal components k is determined arbitrarily by setting a threshold ε on the total variance. Total variance ⁠ v = ( λ 1 + λ 2 + . . . + λ n ) {\displaystyle v=(\lambda _{1}+\lambda _{2}+...+\lambda _{n})} ⁠, n = number of components, and λ {\displaystyle \lambda } represents component eigenvalue. k is the smallest number that satisfies ( λ 1 + λ 2 + . . . + λ k ) v > ϵ {\displaystyle {\frac {(\lambda _{1}+\lambda _{2}+...+\lambda _{k})}{v}}>\epsilon } These eigenfaces can now be used to represent both existing and new faces: we can project a new (mean-subtracted) image on the eigenfaces and thereby record how that new face differs from the mean face. The eigenvalues associated with each eigenface represent how much the images in the training set vary from the mean image in that direction. Information is lost by projecting the image on a subset of the eigenvectors, but losses are minimized by keeping those eigenfaces with the largest eigenvalues. For instance, working with a 100 × 100 image will produce 10,000 eigenvectors. In practical applications, most faces can typically be identified using a projection on between 100 and 150 eigenfaces, so that most of the 10,000 eigenvectors can be discarded. === Matlab example code === Here is an example of calculating eigenfaces with Extended Yale Face Database B. To evade computational and storage bottleneck, the face images are sampled down by a factor 4×4=16. Note that although the covariance matrix S generates many eigenfaces, only a fraction of those are needed to represent the majority of the faces. For example, to represent 95% of the total variation of all face images, only the first 43 eigenfaces are needed. To calculate this result, implement the following code: === Computing the eigenvectors === Performing PCA directly on the covariance matrix of the images is often computationally infeasible. If small images are used, say 100 × 100 pixels, each image is a point in a 10,000-dimensional space and the covariance matrix S is a matrix of 10,000 × 10,000 = 108 elements. However the rank of the covariance matrix is limited by the number of training examples: if there are N training examples, there will be at most N − 1 eigenvectors with non-zero eigenvalues. If the number of training examples is smaller than the dimensionality of the images, the principal components can be computed more easily as follows. Let T be the matrix of preprocessed training examples, where each column contains one mean-subtracted image. The covariance matrix can then be computed as S = TTT and the eigenvector decomposition of S is given by S v i = T T T v i = λ i v i {\displaystyle \mathbf {Sv} _{i}=\mathbf {T} \mathbf {T} ^{T}\mathbf {v} _{i}=\lambda _{i}\mathbf {v} _{i}} However TTT is a large matrix, and if instead we take the eigenvalue decomposition of T T T u i = λ i u i {\displaystyle \mathbf {T} ^{T}\mathbf {T} \mathbf {u} _{i}=\lambda _{i}\mathbf {u} _{i}} then we notice that by pre-multiplying both sides of the equation with T, we obtain T T T T u i = λ i T u i {\displaystyle \mathbf {T} \mathbf {T} ^{T}\mathbf {T} \mathbf {u} _{i}=\lambda _{i}\mathbf {T} \mathbf {u} _{i}} Meaning that, if ui is an eigenvector of TTT, then vi = Tui is an eigenvector of S. If we have

    Read more →
  • Symbaloo

    Symbaloo

    Symbaloo is a cloud-based site that allows users to organize and categorize web links in the form of buttons. Symbaloo works from a web browser and can be configured as a homepage, allowing users to create a personalized virtual desktop accessible from any device with an Internet connection. Symbaloo users, which must be previously registered, have a page with a grid of buttons that can be configured to link to a specific page. The site allows users to assign different colors to the buttons for easy visual classification. Symbaloo allows a single user to create different pages or screens with buttons. These screens called webmix are useful to separate topics and links can be shared with other users, making them public and sending the link via email. As of 2015 Symbaloo has 6 million users worldwide and mainly used as an online education resource. Symbaloo's slogan is "Start Simple".

    Read more →
  • ISLRN

    ISLRN

    The ISLRN or International Standard Language Resource Number is Persistent Unique Identifier for Language Resources. == Context == On November 18, 2013, 12 major organisations (see list below) from the fields Language Resources and Technologies, Computational Linguistics, and Digital Humanities held a cooperation meeting in Paris (France) and agreed to announce the establishment of the International Standard Language Resource Number (ISLRN), to be assigned to each Language Resource. Among the 12 organisations, 4 institutions constitute the ISLRN Steering Committee (ST) ADHO ACL Asian Federation of Natural Language Processing ST COCOSDA, International Committee for the Coordination & Standardisation of Speech Databases and Assessment Techniques ICCL (COLING) European Data Forum ELRA ST IAMT, International Association for Machine Translation Archived 2010-06-24 at the Wayback Machine ISCA LDC ST Oriental COCOSDA ST RMA, Language Resource Management Agency == Size and Content == The Joint Research Centre(JRC), the [European Commission]'s in-house science service, was the first organisation to adopt the ISLRN initiative and requested. 2500 resources and tools have already been allocated an ISLRN. These resources include written data (Annotated corpus, Annotated text, List of misspelled word, Terminological database, Treebank, Wordnet, etc.) and speech corpora (Synthesised Speech, Transcripts and Audiovisual Recordings, Conversational Speech, Folk Sayings, etc.) == Objectives == Providing Language Resources with unique names and identifiers using a standardized nomenclature ensures the identification of each Language Resources and streamlines the citation with proper references in activities within Human Language Technology as well as in documents and scientific publications. Such unique identifier also enhances the reproducibility, an essential feature of scientific work.

    Read more →
  • Contextual AI

    Contextual AI

    Contextual AI is an enterprise software company based in Mountain View, California. It develops a platform for building specialized Retrieval-Augmented Generation (RAG) agents for enterprise use. The company was founded in 2023 by Douwe Kiela and Amanpreet Singh, both former AI researchers at Facebook AI Research (FAIR) and Hugging Face. Douwe Kiela previously led the Meta research team that introduced the Retrieval-Augmented Generation (RAG) approach in 2020. Contextual AI focuses on enterprise generative AI applications using RAG 2.0 technology, with deployments primarily in the technology, banking, finance and media sectors. == History == In June 2023, Contextual AI announced it had raised $20 million in a seed funding round led by Bain Capital Ventures (BCV), with participation from Lightspeed Venture Partners, Greycroft, SV Angel, and several angel investors. In August 2024, the company raised $80 million in a Series A funding round led by Greycroft, with participation from previous investors including Bain Capital Ventures, Lightspeed, and Conviction Partners. The round also included new backers such as Bezos Expeditions, NVentures (Nvidia), HSBC Ventures, and Snowflake Ventures. == Features == Retrieval-Augmented Generation (RAG) is an artificial intelligence framework that integrates information retrieval with text generation to improve the performance of large language models (LLMs) on complex, knowledge-intensive tasks. It was introduced in 2020 by researchers at Meta AI, including Douwe Kiela, Patrick Lewis and others, in their paper Retrieval-Augmented Generation for Knowledge-Intensive NLP Tasks. RAG enables language models to access and incorporate external information, such as proprietary databases or real-time web content, at query time, instead of relying solely on pre-trained, internal, static knowledge. This architecture addresses common limitations of standard LLMs, including hallucination, outdated information, and lack of attribution to source materials. RAG systems retrieve relevant context through a variety of techniques - including vector search, keyword search, text-to-SQL - and feeds this context into the language model to generate responses. The approach improves factual accuracy, supports domain-specific customization, enables citation of sources, and allows for more updated information without retraining the model itself. General Availability. In January 2025, Contextual AI announced the general availability of its enterprise platform for building specialized RAG agents. Early adopters included Qualcomm, which used the platform for their Customer Engineering team needs. Grounded Language Model. In March 2025, the company introduced a Grounded Language Model (GLM) for factual accuracy in enterprise AI applications. Reranker. In March 2025, Contextual AI released an instruction-following reranker that allows users to influence the ranking of retrieved documents through natural language instructions, such as prioritizing recent files, specific formats, or content from designated sources. == Applications == Contextual AI's platform has been adopted across a range of industries, including finance, technology, media and professional services. Clients include Fortune 500 companies such as Qualcomm and HSBC.

    Read more →
  • Semantic decomposition (natural language processing)

    Semantic decomposition (natural language processing)

    A semantic decomposition is an algorithm that breaks down the meanings of phrases or concepts into less complex concepts. The result of a semantic decomposition is a representation of meaning. This representation can be used for tasks, such as those related to artificial intelligence or machine learning. Semantic decomposition is common in natural language processing applications. The basic idea of a semantic decomposition is taken from the learning skills of adult humans, where words are explained using other words. It is based on Meaning-text theory. Meaning-text theory is used as a theoretical linguistic framework to describe the meaning of concepts with other concepts. == Background == Given that an AI does not inherently have language, it is unable to think about the meanings behind the words of a language. An artificial notion of meaning needs to be created for a strong AI to emerge. Creating an artificial representation of meaning requires the analysis of what meaning is. Many terms are associated with meaning, including semantics, pragmatics, knowledge and understanding or word sense. Each term describes a particular aspect of meaning, and contributes to a multitude of theories explaining what meaning is. These theories need to be analyzed further to develop an artificial notion of meaning best fit for our current state of knowledge. == Graph representations == Representing meaning as a graph is one of the two ways that both an AI cognition and a linguistic researcher think about meaning (connectionist view). Logicians utilize a formal representation of meaning to build upon the idea of symbolic representation, whereas description logics describe languages and the meaning of symbols. This contention between 'neat' and 'scruffy' techniques has been discussed since the 1970s. Research has so far identified semantic measures and with that word-sense disambiguation (WSD) - the differentiation of meaning of words - as the main problem of language understanding. As an AI-complete environment, WSD is a core problem of natural language understanding. AI approaches that use knowledge-given reasoning creates a notion of meaning combining the state of the art knowledge of natural meaning with the symbolic and connectionist formalization of meaning for AI. The abstract approach is shown in Figure. First, a connectionist knowledge representation is created as a semantic network consisting of concepts and their relations to serve as the basis for the representation of meaning. This graph is built out of different knowledge sources like WordNet, Wiktionary, and BabelNET. The graph is created by lexical decomposition that recursively breaks each concept semantically down into a set of semantic primes. The primes are taken from the theory of Natural Semantic Metalanguage, which has been analyzed for usefulness in formal languages. Upon this graph marker passing is used to create the dynamic part of meaning representing thoughts. The marker passing algorithm, where symbolic information is passed along relations form one concept to another, uses node and edge interpretation to guide its markers. The node and edge interpretation model is the symbolic influence of certain concepts. Future work uses the created representation of meaning to build heuristics and evaluate them through capability matching and agent planning, chatbots or other applications of natural language understanding.

    Read more →
  • Spanish Network of Excellence on Cybersecurity Research

    Spanish Network of Excellence on Cybersecurity Research

    The Spanish Network of Excellence on Cybersecurity Research (RENIC), is a research initiative to promote cybersecurity interests in Spain. == Members == === Board of Directors (2018) === President: Universidad de Málaga Vice president: CSIC Treasurer: Universidad Politécnica de Madrid Secretary: Universidad de Granada Vocals: Tecnalia, Universidad de La Laguna and Universidad de Modragón === Board of Directors (2016) === President: Universidad Carlos III de Madrid Vice president: Universidad Politécnica de Madrid Treasurer: Universidad de Granada Secretary: Universidad de León Vocals: Gradiant, Tecnalia, Universidad de Málaga === Founding Members === Centro Andaluz de Innovación y Tecnologías de la Información y las Comunicaciones (CITIC). Consejo Superior de Investigaciones Científicas (CSIC). Centro Tecnolóxico de Telecomunicaciones de Galicia (Gradiant). Instituto Imdea Software. Instituto Nacional de Ciberseguridad (INCIBE). Mondragón Unibertsitatea. Tecnalia. Universidad Carlos III de Madrid. Universidad Castilla la Mancha. Universidad de Granada. Universidad de la Laguna. Universidad de León. Universidad de Málaga. Universidad de Murcia. Universidad de Vigo. Universidad Internacional de la Rioja. Universidad Politécnica de Madrid. Universidad Rey Juan Carlos. === Members === Consejo Superior de Investigaciones Científicas (CSIC). Centro Tecnolóxico de Telecomunicaciones de Galicia (Gradiant). Instituto Imdea Software. Instituto Nacional de Ciberseguridad (INCIBE). Mondragón Unibertsitatea. Tecnalia. Universidad Carlos III de Madrid. Universidad de Castilla-La Mancha. Universidad de Granada. Universidad de la Laguna. Universidad de León. Universidad de Málaga. Universidad de Murcia. Universidad de Vigo. Universidad Politécnica de Madrid. Universidad Rey Juan Carlos. Universitat Oberta de Catalunya. IKERLAN. === Honorary Members === Centre for the Development of Industrial Technology (CDTI). (2017) Instituto Nacional de Ciberseguridad (INCIBE). (2016) == Initiatives and Participations == RENIC is ECSO member, and is also a member of its board of directors. A collaboration agreement between RENIC and the Innovative Business Cluster on Cybersecurity (AEI Cybersecurity) has been signed. RENIC is pleased to sponsor the Cybersecurity Research National Conferences (JNIC) JNIC2017 edition, organized by Universidad Rey Juan Carlos. RENIC is pleased to announce the publication of the online version of the Catalog and knowledge map of cybersecurity research

    Read more →
  • Knowledge assessment methodology

    Knowledge assessment methodology

    The knowledge assessment methodology (KAM) is "an interactive benchmarking tool created by the World Bank's Knowledge for Development Program to help countries identify the challenges and opportunities they face in making the transition to the knowledge-based economy." KAM does so by providing information on knowledge economy indicators for 146 countries. Its products include the Knowledge Economy Index and the Knowledge Index.

    Read more →
  • Visual servoing

    Visual servoing

    Visual servoing, also known as vision-based robot control and abbreviated VS, is a technique which uses feedback information extracted from a vision sensor (visual feedback) to control the motion of a robot. One of the earliest papers that talks about visual servoing was from the SRI International Labs in 1979. == Visual servoing taxonomy == There are two fundamental configurations of the robot end-effector (hand) and the camera: Eye-in-hand, or end-point open-loop control, where the camera is attached to the moving hand and observing the relative position of the target. Eye-to-hand, or end-point closed-loop control, where the camera is fixed in the world and observing the target and the motion of the hand. Visual Servoing control techniques are broadly classified into the following types: Image-based (IBVS) Position/pose-based (PBVS) Hybrid approach IBVS was proposed by Weiss and Sanderson. The control law is based on the error between current and desired features on the image plane, and does not involve any estimate of the pose of the target. The features may be the coordinates of visual features, lines or moments of regions. IBVS has difficulties with motions very large rotations, which has come to be called camera retreat. PBVS is a model-based technique (with a single camera). This is because the pose of the object of interest is estimated with respect to the camera and then a command is issued to the robot controller, which in turn controls the robot. In this case the image features are extracted as well, but are additionally used to estimate 3D information (pose of the object in Cartesian space), hence it is servoing in 3D. Hybrid approaches use some combination of the 2D and 3D servoing. There have been a few different approaches to hybrid servoing 2-1/2-D Servoing Motion partition-based Partitioned DOF Based == Survey == The following description of the prior work is divided into 3 parts Survey of existing visual servoing methods. Various features used and their impacts on visual servoing. Error and stability analysis of visual servoing schemes. === Survey of existing visual servoing methods === Visual servo systems, also called servoing, have been around since the early 1980s , although the term visual servo itself was only coined in 1987. Visual Servoing is, in essence, a method for robot control where the sensor used is a camera (visual sensor). Servoing consists primarily of two techniques, one involves using information from the image to directly control the degrees of freedom (DOF) of the robot, thus referred to as Image Based Visual Servoing (IBVS). While the other involves the geometric interpretation of the information extracted from the camera, such as estimating the pose of the target and parameters of the camera (assuming some basic model of the target is known). Other servoing classifications exist based on the variations in each component of a servoing system , e.g. the location of the camera, the two kinds are eye-in-hand and hand–eye configurations. Based on the control loop, the two kinds are end-point-open-loop and end-point-closed-loop. Based on whether the control is applied to the joints (or DOF) directly or as a position command to a robot controller the two types are direct servoing and dynamic look-and-move. Being one of the earliest works the authors proposed a hierarchical visual servo scheme applied to image-based servoing. The technique relies on the assumption that a good set of features can be extracted from the object of interest (e.g. edges, corners and centroids) and used as a partial model along with global models of the scene and robot. The control strategy is applied to a simulation of a two and three DOF robot arm. Feddema et al. introduced the idea of generating task trajectory with respect to the feature velocity. This is to ensure that the sensors are not rendered ineffective (stopping the feedback) for any the robot motions. The authors assume that the objects are known a priori (e.g. CAD model) and all the features can be extracted from the object. The work by Espiau et al. discusses some of the basic questions in visual servoing. The discussions concentrate on modeling of the interaction matrix, camera, visual features (points, lines, etc..). In an adaptive servoing system was proposed with a look-and-move servoing architecture. The method used optical flow along with SSD to provide a confidence metric and a stochastic controller with Kalman filtering for the control scheme. The system assumes (in the examples) that the plane of the camera and the plane of the features are parallel., discusses an approach of velocity control using the Jacobian relationship s˙ = Jv˙ . In addition the author uses Kalman filtering, assuming that the extracted position of the target have inherent errors (sensor errors). A model of the target velocity is developed and used as a feed-forward input in the control loop. Also, mentions the importance of looking into kinematic discrepancy, dynamic effects, repeatability, settling time oscillations and lag in response. Corke poses a set of very critical questions on visual servoing and tries to elaborate on their implications. The paper primarily focuses the dynamics of visual servoing. The author tries to address problems like lag and stability, while also talking about feed-forward paths in the control loop. The paper also, tries to seek justification for trajectory generation, methodology of axis control and development of performance metrics. Chaumette in provides good insight into the two major problems with IBVS. One, servoing to a local minima and second, reaching a Jacobian singularity. The author show that image points alone do not make good features due to the occurrence of singularities. The paper continues, by discussing the possible additional checks to prevent singularities namely, condition numbers of J_s and Jˆ+_s, to check the null space of ˆ J_s and J^T_s . One main point that the author highlights is the relation between local minima and unrealizable image feature motions. Over the years many hybrid techniques have been developed. These involve computing partial/complete pose from Epipolar Geometry using multiple views or multiple cameras. The values are obtained by direct estimation or through a learning or a statistical scheme. While others have used a switching approach that changes between image-based and position-based on a Lyapnov function. The early hybrid techniques that used a combination of image-based and pose-based (2D and 3D information) approaches for servoing required either a full or partial model of the object in order to extract the pose information and used a variety of techniques to extract the motion information from the image. used an affine motion model from the image motion in addition to a rough polyhedral CAD model to extract the object pose with respect to the camera to be able to servo onto the object (on the lines of PBVS). 2-1/2-D visual servoing developed by Malis et al. is a well known technique that breaks down the information required for servoing into an organized fashion which decouples rotations and translations. The papers assume that the desired pose is known a priori. The rotational information is obtained from partial pose estimation, a homography, (essentially 3D information) giving an axis of rotation and the angle (by computing the eigenvalues and eigenvectors of the homography). The translational information is obtained from the image directly by tracking a set of feature points. The only conditions being that the feature points being tracked never leave the field of view and that a depth estimate be predetermined by some off-line technique. 2-1/2-D servoing has been shown to be more stable than the techniques that preceded it. Another interesting observation with this formulation is that the authors claim that the visual Jacobian will have no singularities during the motions. The hybrid technique developed by Corke and Hutchinson, popularly called portioned approach partitions the visual (or image) Jacobian into motions (both rotations and translations) relating X and Y axes and motions related to the Z axis. outlines the technique, to break out columns of the visual Jacobian that correspond to the Z axis translation and rotation (namely, the third and sixth columns). The partitioned approach is shown to handle the Chaumette Conundrum discussed in. This technique requires a good depth estimate in order to function properly. outlines a hybrid approach where the servoing task is split into two, namely main and secondary. The main task is keep the features of interest within the field of view. While the secondary task is to mark a fixation point and use it as a reference to bring the camera to the desired pose. The technique does need a depth estimate from an off-line procedure. The paper discusses two examples for which depth estimates are obtained from robot odometry and by assuming that all

    Read more →