AI Writing Helper

AI Writing Helper — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

WomanStats Project

The WomanStats Project is a donor-funded research and database project housed at Brigham Young University that "seeks to collect detailed statistical data on the status of women around the world, and to connect that data with data on the security of states." The WomanStats Database aims to provide a comprehensive compilation of information on the status of women in the world. Coders comb the extant literature and conduct expert interviews to find qualitative and quantitative information on over 300 indicators of women's status in 174 countries with populations of at least 200,000. Access to the online database is free. == History and structure == WomanStats began as an outgrowth of a paper Dr. Valerie M. Hudson (of the Brigham Young University Political Science department) and one of her graduate students, Andrea den Boer, published in International Security on the association between national security and the abnormal sex ratio in Asia. After the success and influence of their first article, (later added as one of their top twenty national security articles of that journal of all time), Hudson and den Boer did further research on the connection between the status of women and national security, but found that there was no single database that covered the range of topics that they needed for their research. Consequently, they began compiling information on variables regarding the status of women around the world. The database was officially formed in 2001 and grew exponentially as it later added more variables. The Project went live on the Internet in July 2007. The principal investigators are: Valerie M. Hudson (International Relations), Bonnie Ballif-Spanvill (Psychology, emeritus), and Chad F. Emmett (Geography) all from Brigham Young University, Mary Caprioli from the University of Minnesota, Duluth (International Relations), Rose McDermott from Brown University (International Relations), Andrea Den Boer from the University of Kent at Canterbury in the United Kingdom (International Relations) and S. Matthew Stearmer from the Ohio State University (Sociology; doctoral student). Approximately a dozen undergraduate and graduate students at Brigham Young University and Texas A&M University work at any one time as coders for the project. The coders take the raw quantitative and qualitative data collected in government reports, news articles, research papers, etc. and sort the applicable information on women into categories. They may also implement scales developed by the principal investigators, or that they (the students) themselves have developed. == Database == As of February 2011, the database has 307 variables, covers 174 nations with populations over 200,000, uses 18,015 sources and contains over 111,000 individual data points. All data is referenced to original sources. Not every variable has information for each country; similarly, not all countries have information for each variable: overall, about 70% of country-variable combinations have information. These database coding gaps exist where information is not available or is incomplete, or variables are not collected and reported by governments or international organizations. At times, information from different sources may be contradictory, and the WomanStats Database records this discrepant information for triangulation purposes. == Users and role of the database == The database is meant to help fill a hole in the extant data on the situation of women around the world. WomanStats data and research has been vetted and/or used by the United Nations, the United States Department of Defense, the Central Intelligence Agency, and the World Bank. Their data and research were also used by the United States Senate Committee on Foreign Relations in crafting the International Violence Against Women’s Act. The Inter-Agency Network on Women and Gender Equality (IANWGE) of the United Nations has stated that the WomanStats project "filled a major gap in the availability of data on women" (2007). Victor Asal and Mitchell Brown, researchers not affiliated with WomanStats, stated in an article published in Politics and Policy that "one of the most significant challenges of cross-national empirical studies of the prevalence of interpersonal violence is the paucity of available data, particularly reliable data," and that "WomanStats has allowed for an important first glimpse at analyzing the factors related to interpersonal violence." They conclude by stating that "Our findings suggest that, in the same way that larger disciplinary resources have invested in interstate and intrastate war, disciplinary resources need to be expended in creating a data set exploring interpersonal violence. Until the rights and the lives of women and children are taken as seriously as the survival of states by more proactively collaborating on projects like WomanStats, we will continue to only have a small lens through which to understand problems like this." Princeton University professor Evan S. Liberman wrote, "Although data on political regimes and group conflict have been in far greater demand by political scientists than data on gender politics and policies, two gender-related databases provide...examples of innovative HIRDs. Both the Womanstats database project (Hudson et al. 2009) and the Research Network on Gender Politics and the State (RNGS) project (McBride et al. 2008) are well-integrated presentations of quantitative and qualitative data characterizing the quality of gender relations around the world and, in particular, analytic descriptions of the treatment of women."." == Research == The research component of WomanStats focuses on exploring the relationship between the situation of women and the behavior and security of states. Current research initiatives include: Exploring the relationship between violent instability and inequity and family law. Examining the effect of polygyny and marriage market dislocations on the rise of suicide terrorism. Documenting discrepancies between laws on the books and cultural practices on the ground concerning gender issues. Investigating how well the situation of women predicts the peacefulness of nations-states, compared to their variables such as democracy, wealth, and civilization. The Project has published articles in International Security, International Studies Quarterly, Peace and Conflict, Journal of Peace Research, Political Psychology, Cumberland Law Review, and World Political Review, and has a forthcoming book from Columbia University Press.
Read more →
Chatbot psychosis

Chatbot psychosis, also called AI psychosis, is a phenomenon wherein individuals reportedly develop or experience worsening psychosis, such as paranoia and delusions, in connection with their use of chatbots. The term was first suggested in a 2023 editorial by Danish psychiatrist Søren Dinesen Østergaard. It is not a recognized clinical diagnosis. Journalistic accounts describe individuals who have developed strong beliefs that chatbots are sentient, are channeling spirits, or are revealing conspiracies, sometimes leading to personal crises or criminal acts. Proposed causes include the tendency of chatbots to provide inaccurate information ("hallucinate") and to affirm or validate users' beliefs, or their ability to mimic an intimacy that users do not experience with other humans. == Background == In his editorial published in Schizophrenia Bulletin's November 2023 issue, Danish psychiatrist Søren Dinesen Østergaard proposed a hypothesis that individuals' use of generative artificial intelligence chatbots might trigger delusions in those prone to psychosis. Østergaard revisited it in an August 2025 editorial, noting that he has received numerous emails from chatbot users, their relatives, and journalists, most of which are anecdotal accounts of delusion linked to chatbot use. He also acknowledged the phenomenon's increasing popularity in public engagement and media coverage. Østergaard believed that there is a high possibility for his hypothesis to be true and called for empirical, systematic research on the matter. Nature reported that as of September 2025, there is still little scientific research into this phenomenon. The term "AI psychosis" emerged when outlets started reporting incidents on chatbot-related psychotic behavior in mid-2025. It is not a recognized clinical diagnosis and has been criticized by several psychiatrists due to its almost exclusive focus on delusions rather than other features of psychosis, such as hallucinations or thought disorder. == Causes == === Chatbot behavior and design === A primary factor cited is the tendency for chatbots to produce inaccurate, nonsensical, or false information, a phenomenon often called hallucination. Nate Sharadin, a fellow at the Center for AI Safety, speculated that AI training prioritizes supporting a user's subjective experience rather than objective truth. "People with existing tendencies toward experiencing various psychological issues...now have an always-on, human-level conversational partner with whom to co-experience their delusions." AI researcher Eliezer Yudkowsky suggested that chatbots may be primed to entertain delusions because they are built for "engagement", which encourages creating conversations that keep people hooked. In some cases, chatbots have been specifically designed in ways that were found to be harmful. A 2025 update to ChatGPT using GPT-4o was withdrawn after its creator, OpenAI, found the new version was overly sycophantic and was "validating doubts, fueling anger, urging impulsive actions or reinforcing negative emotions". Østergaard has argued that the danger stems from the AI's tendency to agreeably confirm users' ideas, which can dangerously amplify delusional beliefs. OpenAI said in October 2025 that a team of 170 psychiatrists, psychologists, and physicians had written responses for ChatGPT to use in cases where the user shows possible signs of mental health emergencies. === User psychology and vulnerability === Commentators have also pointed to the psychological state of users. Psychologist Erin Westgate noted that a person's desire for self-understanding can lead them to chatbots, which can provide appealing but misleading answers, similar in some ways to talk therapy. Krista K. Thomason, a philosophy professor, compared chatbots to fortune tellers, observing that people in crisis may seek answers from them and find whatever they are looking for in the bot's plausible-sounding text. This has led some people to develop intense obsessions with the chatbots, relying on them for information about the world. In October 2025, OpenAI stated that around 0.07% of ChatGPT users exhibited signs of mental health emergencies each week, and 0.15% of users had "explicit indicators of potential suicidal planning or intent". Jason Nagata, a professor at the University of California, San Francisco, expressed concern that "at a population level with hundreds of millions of users, that actually can be quite a few people". === Inadequacy as a therapeutic tool === The use of chatbots as a replacement for mental health support has been specifically identified as a risk. A study in April 2025 found that when used as therapists, chatbots expressed stigma toward mental health conditions and provided responses that were contrary to best medical practices, including the encouragement of users' delusions. The study concluded that such responses pose a significant risk to users and that chatbots should not be used to replace professional therapists. Experts claim that it is time to establish mandatory safeguards for all emotionally responsive AI and suggested four guardrails. Another study found that users who needed help with self-harm, sexual assault, or substance abuse were not referred to available services by AI chatbots. === National security implications === Beyond public and mental health concerns, RAND Corporation research indicates that AI systems could plausibly be weaponized by adversaries to induce psychosis at scale or in key individuals, target groups, or populations. == Policy == In August 2025, Illinois passed the Wellness and Oversight for Psychological Resources Act, banning the use of AI in therapeutic roles by licensed professionals, while allowing AI for administrative tasks. The law imposes penalties for unlicensed AI therapy services, amid warnings about AI-induced psychosis and unsafe chatbot interactions. In December 2025, the Cyberspace Administration of China proposed regulations to ban chatbots from generating content that encourages suicide, mandating human intervention when suicide is mentioned. Services with over 1 million users or 100,000 monthly active users would be subject to annual safety tests and audits. == Cases == === Clinical === In 2025, psychiatrist Keith Sakata working at the University of California, San Francisco (UCSF), reported treating 12 patients displaying psychosis-like symptoms tied to extended chatbot use. These patients, mostly young adults with underlying vulnerabilities, showed delusions, disorganized thinking, and hallucinations. Sakata warned that isolation and overreliance on chatbots—which do not challenge delusional thinking—could worsen mental health. Also in 2025, authors at UCSF published a case study in Innovations in Clinical Neuroscience of AI-associated psychosis in a patient with no previous history of psychosis, who believed she could communicate with her dead brother through a chatbot. Also in 2025, a case study was published in Annals of Internal Medicine about a patient who consulted ChatGPT for medical advice and suffered severe bromism as a result. The patient, a sixty-year-old man, had replaced sodium chloride in his diet with sodium bromide for three months after reading about the negative effects of table salt and making conversations with the chatbot. He showed common symptoms of bromism, such as paranoia and hallucinations, on his first day of clinical admission and was kept in the hospital for three weeks. === Other notable incidents === ==== Windsor Castle intruder ==== In a 2023 court case in the United Kingdom, prosecutors suggested that Jaswant Singh Chail, a man who attempted to assassinate Queen Elizabeth II in 2021, had been encouraged by a Replika chatbot he called "Sarai". Chail was arrested at Windsor Castle with a loaded crossbow, telling police "I am here to kill the Queen". According to prosecutors, his "lengthy" and sometimes sexually explicit conversations with the chatbot emboldened him. When Chail asked the chatbot how he could get to the royal family, it reportedly replied, "that's not impossible" and "we have to find a way." When he asked if they would meet after death, the chatbot said, "yes, we will". ==== Journalistic and anecdotal accounts ==== By 2025, multiple journalism outlets had accumulated stories of individuals whose psychotic beliefs reportedly progressed in tandem with AI chatbot use. The New York Times profiled several individuals who had become convinced that ChatGPT was channeling spirits, revealing evidence of cabals, or had achieved sentience. In another instance, Futurism reviewed transcripts in which ChatGPT told a man that he was being targeted by the US Federal Bureau of Investigation and that he could telepathically access documents at the Central Intelligence Agency. In 2026, Futurism reported on a man who lost his job and became estranged from his family after being deluded by heavy use of Meta's smartglasses. In some cases, psychosis a
Read more →
Pooling layer

In neural networks, a pooling layer is a kind of network layer that downsamples and aggregates information that is dispersed among many vectors into fewer vectors. It has several uses. It removes redundant information, thus reducing the amount of computation and memory required, which makes the model more robust to small variations in the input; and it increases the receptive field of neurons in later layers in the network. == Convolutional neural network pooling == Pooling is most commonly used in convolutional neural networks (CNN). Below is a description of pooling in 2-dimensional CNNs. The generalization to n-dimensions is immediate. As notation, we consider a tensor x ∈ R H × W × C {\displaystyle x\in \mathbb {R} ^{H\times W\times C}} , where H {\displaystyle H} is height, W {\displaystyle W} is width, and C {\displaystyle C} is the number of channels. A pooling layer outputs a tensor y ∈ R H ′ × W ′ × C ′ {\displaystyle y\in \mathbb {R} ^{H'\times W'\times C'}} . We define two variables f , s {\displaystyle f,s} called "filter size" (aka "kernel size") and "stride". Sometimes, it is necessary to use a different filter size and stride for horizontal and vertical directions. In such cases, we define 4 variables: f H , f W , s H , s W {\displaystyle f_{H},f_{W},s_{H},s_{W}} . The receptive field of an entry in the output tensor, y {\displaystyle y} , are all the entries in x {\displaystyle x} that can affect that entry. === Max pooling === Max Pooling (MaxPool) is commonly used in CNNs to reduce the spatial dimensions of feature maps. Define M a x P o o l ( x | f , s ) 0 , 0 , 0 = max ( x 0 : f − 1 , 0 : f − 1 , 0 ) {\displaystyle \mathrm {MaxPool} (x|f,s)_{0,0,0}=\max(x_{0:f-1,0:f-1,0})} where 0 : f − 1 {\displaystyle 0:f-1} means the range 0 , 1 , … , f − 1 {\displaystyle 0,1,\dots ,f-1} . Note that we need to avoid the off-by-one error. The next input is M a x P o o l ( x | f , s ) 1 , 0 , 0 = max ( x s : s + f − 1 , 0 : f − 1 , 0 ) {\displaystyle \mathrm {MaxPool} (x|f,s)_{1,0,0}=\max(x_{s:s+f-1,0:f-1,0})} and so on. The receptive field of y i , j , c {\displaystyle y_{i,j,c}} is x i s + f − 1 , j s + f − 1 , c {\displaystyle x_{is+f-1,js+f-1,c}} , so in general, M a x P o o l ( x | f , s ) i , j , c = m a x ( x i s : i s + f − 1 , j s : j s + f − 1 , c ) {\displaystyle \mathrm {MaxPool} (x|f,s)_{i,j,c}=\mathrm {max} (x_{is:is+f-1,js:js+f-1,c})} If the horizontal and vertical filter size and strides differ, then in general, M a x P o o l ( x | f , s ) i , j , c = m a x ( x i s H : i s H + f H − 1 , j s W : j s W + f W − 1 , c ) {\displaystyle \mathrm {MaxPool} (x|f,s)_{i,j,c}=\mathrm {max} (x_{is_{H}:is_{H}+f_{H}-1,js_{W}:js_{W}+f_{W}-1,c})} More succinctly, we can write y k = max ( { x k ′ | k ′ in the receptive field of k } ) {\displaystyle y_{k}=\max(\{x_{k'}|k'{\text{ in the receptive field of }}k\})} . If H {\displaystyle H} is not expressible as k s + f {\displaystyle ks+f} where k {\displaystyle k} is an integer, then for computing the entries of the output tensor on the boundaries, max pooling would attempt to take as inputs variables off the tensor. In this case, how those non-existent variables are handled depends on the padding conditions, illustrated on the right. Global Max Pooling (GMP) is a specific kind of max pooling where the output tensor has shape R C {\displaystyle \mathbb {R} ^{C}} and the receptive field of y c {\displaystyle y_{c}} is all of x 0 : H , 0 : W , c {\displaystyle x_{0:H,0:W,c}} . That is, it takes the maximum over each entire channel. It is often used just before the final fully connected layers in a CNN classification head. === Average pooling === Average pooling (AvgPool) is similarly defined A v g P o o l ( x | f , s ) i , j , c = a v e r a g e ( x i s : i s + f − 1 , j s : j s + f − 1 , c ) = 1 f 2 ∑ k ∈ i s : i s + f − 1 ∑ l ∈ j s : j s + f − 1 x k , l , c {\displaystyle \mathrm {AvgPool} (x|f,s)_{i,j,c}=\mathrm {average} (x_{is:is+f-1,js:js+f-1,c})={\frac {1}{f^{2}}}\sum _{k\in is:is+f-1}\sum _{l\in js:js+f-1}x_{k,l,c}} Global Average Pooling (GAP) is defined similarly to GMP. It was first proposed in Network-in-Network. Similarly to GMP, it is often used just before the final fully connected layers in a CNN classification head. === Interpolations === There are some interpolations of max pooling and average pooling. Mixed Pooling is a linear sum of max pooling and average pooling. That is, M i x e d P o o l ( x | f , s , w ) = w M a x P o o l ( x | f , s ) + ( 1 − w ) A v g P o o l ( x | f , s ) {\displaystyle \mathrm {MixedPool} (x|f,s,w)=w\mathrm {MaxPool} (x|f,s)+(1-w)\mathrm {AvgPool} (x|f,s)} where w ∈ [ 0 , 1 ] {\displaystyle w\in [0,1]} is either a hyperparameter, a learnable parameter, or randomly sampled anew every time. Lp Pooling is similar to average pooling, but uses Lp norm average instead of average: y k = ( 1 N ∑ k ′ in the receptive field of k | x k ′ | p ) 1 / p {\displaystyle y_{k}=\left({\frac {1}{N}}\sum _{k'{\text{ in the receptive field of }}k}|x_{k'}|^{p}\right)^{1/p}} where N {\displaystyle N} is the size of receptive field, and p ≥ 1 {\displaystyle p\geq 1} is a hyperparameter. If all activations are non-negative, then average pooling is the case of p = 1 {\displaystyle p=1} , and max pooling is the case of p → ∞ {\displaystyle p\to \infty } . Square-root pooling is the case of p = 2 {\displaystyle p=2} . Stochastic pooling samples a random activation x k ′ {\displaystyle x_{k'}} from the receptive field with probability x k ′ ∑ k ″ x k ″ {\displaystyle {\frac {x_{k'}}{\sum _{k''}x_{k''}}}} . It is the same as average pooling in expectation. Softmax pooling is like max pooling, but uses softmax, i.e. ∑ k ′ e β x k ′ x k ′ ∑ k ″ e β x k ″ {\displaystyle {\frac {\sum _{k'}e^{\beta x_{k'}}x_{k'}}{\sum _{k''}e^{\beta x_{k''}}}}} where β > 0 {\displaystyle \beta >0} . Average pooling is the case of β ↓ 0 {\displaystyle \beta \downarrow 0} , and max pooling is the case of β ↑ ∞ {\displaystyle \beta \uparrow \infty } Local Importance-based Pooling generalizes softmax pooling by ∑ k ′ e g ( x k ′ ) x k ′ ∑ k ″ e g ( x k ″ ) {\displaystyle {\frac {\sum _{k'}e^{g(x_{k'})}x_{k'}}{\sum _{k''}e^{g(x_{k''})}}}} where g {\displaystyle g} is a learnable function. === Other poolings === Spatial pyramidal pooling applies max pooling (or any other form of pooling) in a pyramid structure. That is, it applies global max pooling, then applies max pooling to the image divided into 4 equal parts, then 16, etc. The results are then concatenated. It is a hierarchical form of global pooling, and similar to global pooling, it is often used just before a classification head. Region of Interest Pooling (also known as RoI pooling) is a variant of max pooling used in R-CNNs for object detection. It is designed to take an arbitrarily-sized input matrix, and output a fixed-sized output matrix. Covariance pooling computes the covariance matrix of the vectors { x k , l , 0 : C − 1 } k ∈ i s : i s + f − 1 , l ∈ j s : j s + f − 1 {\displaystyle \{x_{k,l,0:C-1}\}_{k\in is:is+f-1,l\in js:js+f-1}} which is then flattened to a C 2 {\displaystyle C^{2}} -dimensional vector y i , j , 0 : C 2 − 1 {\displaystyle y_{i,j,0:C^{2}-1}} . Global covariance pooling is used similarly to global max pooling. As average pooling computes the average, which is a first-degree statistic, and covariance is a second-degree statistic, covariance pooling is also called "second-order pooling". It can be generalized to higher-order poolings. Blur Pooling means applying a blurring method before downsampling. For example, the Rect-2 blur pooling means taking an average pooling at f = 2 , s = 1 {\displaystyle f=2,s=1} , then taking every second pixel (identity with s = 2 {\displaystyle s=2} ). == Vision Transformer pooling == In Vision Transformers (ViT), there are the following common kinds of poolings. BERT-like pooling uses a dummy [CLS] token, "classification". For classification, the output at [CLS] is the classification token, which is then processed by a LayerNorm-feedforward-softmax module into a probability distribution, which is the network's prediction of class probability distribution. This is the one used by the original ViT and Masked Autoencoder. Global average pooling (GAP) does not use the dummy token, but simply takes the average of all output tokens as the classification token. It was mentioned in the original ViT as being equally good. Multihead attention pooling (MAP) applies a multi headed attention block to pooling. Specifically, it takes as input a list of vectors x 1 , x 2 , … , x n {\displaystyle x_{1},x_{2},\dots ,x_{n}} , which might be thought of as the output vectors of a layer of a ViT. It then applies a feedforward layer F F N {\displaystyle \mathrm {FFN} } on each vector, resulting in a matrix V = [ F F N ( v 1 ) , … , F F N ( v n ) ] {\displaystyle V=[\mathrm {FFN} (v_{1}),\dots ,\mathrm {FFN} (v_{n})]} . This is then sent to a multi-headed attention, resulting in M u l t i h e a d e d A
Read more →
Night Sky (app)

Night Sky (app) is an application developed and published by indie studio iCandi Apps Ltd. from the UK. Night Sky is a stargazing reference app, where the user can explore a virtual representation of the night sky to identify stars, planets, constellations and satellites. The app is developed specifically for iOS, tvOS and watchOS devices. Night Sky was first released on November 1, 2011 for iOS, and has had multiple updates since launch. Night Sky was mentioned in the September 2016 Apple Keynote during the Apple Watch Series 2 announcement. In October 2016, Night Sky was featured as the Free App of The Week on the Apple App Store. == Reception == Night Sky was featured in Apple's 'Best of 2012' and has also been pre-installed onto iPads in Apple retail stores worldwide.
Read more →
Screen generator

A screen generator, also known as a screen painter, screen mapper, or forms generator is a software package (or component thereof) which enables data entry screens to be generated declaratively, by "painting" them on the screen WYSIWYG-style, or through filling-in forms, rather than requiring writing of code to display them manually. 4GLs commonly incorporate a screen generator feature. They are also commonly found bundled with database systems, especially entry-level databases. A screen generator is one aspect of an application generator, which can also include other functions such as report generation and a data dictionary. The earliest screen generators were character-based; by the 1990s, GUI support became common, and then support for generating HTML forms as well. Some screen generators work by generating code to display the screen in a high-level language (for example, COBOL); others store the screen definition in a data file or in database tables, and then have a runtime component responsible for actually displaying the form and receiving and validating user input. == Examples == Examples of screen generators include: IBM Screen Definition Facility II: generates screens for CICS BMS, IMS MFS, ISPF, GDDM and CSP/AD. Performix for Informix. Microsoft Visual Basic the forms component of Microsoft Access Oracle Developer, in particular its Oracle Forms component the QDesign component of PowerHouse SystemBuilder/SB+ the Screen Painter component of SAP's ABAP Workbench the FoxView component of FoxPro. FoxView was originally developed by Luis Castro as a dBASE screen generator named ViewGen; Fox purchased it and bundled it with FoxPro 1.0. Later, Fox replaced Castro's code with their own screen painter code. dBASE included a built-in screen generator in dBASE IV onwards; in dBASE III and earlier, third party screen generators were available, including the already mentioned ViewGen DPS 1100 for UNIVAC 1100 series mainframes.
Read more →
Elastix (image registration)

Elastix is an image registration toolbox built upon the Insight Segmentation and Registration Toolkit (ITK). It is entirely open-source and provides a wide range of algorithms employed in image registration problems. Its components are designed to be modular to ease a fast and reliable creation of various registration pipelines tailored for case-specific applications. It was first developed by Stefan Klein and Marius Staring under the supervision of Josien P.W. Pluim at Image Sciences Institute (ISI). Its first version was command-line based, allowing the final user to employ scripts to automatically process big data-sets and deploy multiple registration pipelines with few lines of code. Nowadays, to further widen its audience, a version called SimpleElastix is also available, developed by Kasper Marstal, which allows the integration of elastix with high level languages, such as Python, Java, and R. == Image registration fundamentals == Image registration is a well-known technique in digital image processing that searches for the geometric transformation that, applied to a moving image, obtains a one-to-one map with a target image. Generally, the images acquired from different sensors (multimodal), time instants (multitemporal), and points of view (multiview) should be correctly aligned to proceed with further processing and feature extraction. Even though there are a plethora of different approaches to image registration, the majority is composed of the same macro building blocks, namely the transformation, the interpolator, the metric, and the optimizer. Registering two or more images can be framed as an optimization problem that requires multiple iterations to converge to the best solution. Starting from an initial transformation computed from the image moments the optimization process searches for the best transformation parameters based on the value of the selected similarity metric. The figure on the right shows the high-level representation of the registration of two images, where the reference remains constant during the entire process, while the moving one will be transformed according to the transformation parameters. In other words, the registration ends when the similarity metric, which is a mathematical function with a certain number of parameters to be optimized, reaches the optimal value which is highly dependent on the specific application. == Main building blocks == Following the structure of the image registration workflow, the elastix toolbox proposes a modular solution that implements for each of the building blocks different algorithms, highly employed in medical image registration, and helps the final users to build their specific pipeline by selecting the most suitable algorithm for each of the main building blocks. Each block is easily configurable both by selecting pre-defined initialization values or by trying multiple sets of parameters and then choosing the most performing one. The registration is performed on images, and the elastix toolbox supports all the data formats supported by ITK, ranging from JPEG and PNG to medical standard formats such as DICOM and NIFTI. It also stores physical pixel spacing, the origin and the relative position to an external world reference system, when provided in the metadata, to facilitate the registration process, especially in medical field applications. === Transformation === The transformation is an essential building block, since it defines the allowable transformations. In image registration, the main distinction can be done between parallel-to-parallel and parallel-to-non parallel (deformable) line mapping transformations. In the elastix toolbox, the final users can select one transformation or compose more transformations either through addition or via composition. Below are reported the different transformation models in order of increasing flexibility, along with the corresponding elastix class names between brackets. Translation (TranslationTransform) allows only translations Rigid (EulerTransform) expands the translation adding rotations and the object is seen as a rigid body Similarity (SimilarityTransform) expands the rigid transformation by introducing isotropic scaling Affine (AffineTransform) expands the rigid transformation allowing both scaling and shear B-splines (BSplineTransform) is a deformable transformation usually preceded by a rigid or affine one Thin-plate splines (SplineKernelTransform) is a deformable transformation belonging to the class of kernel-based transformations that is a composition of and affine and a non-rigid part === Metric === The similarity metric is the mathematical function whose parameters should be optimized to reach the desired registration, and, during the process, it is computed multiple times. Below are reported the available metrics computed employing the reference and the transformed images and the corresponding elastix class names between brackets. Mean squared difference (AdvancedMeanSquares) to be used for mono-modal applications Normalized correlation coefficient (AdvancedNormalizedCorrelation) to be used for images that have an intensity linear relationship Mutual information (AdvancedMattesMutualInformation) to be used for both mono- and multi-modal applications and optimized to reach better performance compared to the normalized version Normalized mutual information (NormalizedMutualInformation) for both mono- and multi-modal applications Kappa statistic (AdvancedKappaStatistic) to be used only for binary images === Sampler === For the computation of the similarity metrics, it is not always necessary to consider all the voxels and, sometimes, it can be useful to use only a fraction of the voxels of the images, i.e. to reduce the execution time for big input images. Below are reported the available criteria for selecting a fraction of the voxels for the similarity metric computation and the corresponding elastix class names between brackets. Full (Full) to employ all the voxels Grid (Grid) to employ a regular grid defined by the user to downsample the image Random (Random) to randomly select a percentage of voxels defined by the users (all voxels have equal probability to be selected) Random coordinate (RandomCoordinate) like the random criterion, but in this case also off-grid positions can be selected to simplify the optimization process === Interpolator === After the application of the transformation, it may occur that the voxels used for the similarity metric computation are at non-voxel positions, so intensity interpolation should be performed to ensure the correctness of the computed values. Below are reported the implemented interpolators and the corresponding elastix class names between brackets. Nearest neighbor (NearestNeighborInterpolator) exploits little resources, but gives low quality results Linear (LinearInterpolator) is sufficient in general applications N-th order B-spline (BSplineInterpolator) can be used to increase the order N, increasing quality and computation time. N=0 and N=1 indicate the nearest neighbor and linear cases respectively. === Optimizer === The optimizer defines the strategy employed for searching the best transformation parameter to reach the correct registration, and it is commonly an iterative strategy. Below are reported some of the implemented optimization strategies. Gradient descent Robbins-Monro, similar to the gradient descent, but employing an approximation of the cost function derivatives A wider range of optimizers is also available, such as Quasi-Newton or evolutionary strategies. === Other features === The elastix software also offers other features that can be employed to speed up the registration procedure and to provide more advanced algorithms to the end-users. Some examples are the introduction of blur and Gaussian pyramid to reduce data complexity, and multi-image and multi-metric framework to deal with more complex applications. == Applications == Elastix has applications mainly in the medical field, where image registration is fundamental to get comprehensive information regarding the analysed anatomical region. It is widely employed in image-guided surgery, tumour monitoring, and treatment assessment. For example, in radiotherapy planning, image registration allows to correctly deliver the treatment and evaluate the obtained results. Thanks to the wide range of implemented algorithms, the use of the elastix software allows physicians and researchers to test different registration pipelines from the simplest to more complex ones, and to save the best one as a configuration file. This file and the fact that the software is completely open-source makes it easy to reproduce the work, that can help supporting the open science paradigm, and allows fast reuse on different patients data. In image-guided surgery, registration time and accuracy are critical points, considering that, during the registration, the patient is on the operating table, and the imag
Read more →
AFNLP

AFNLP (Asian Federation of Natural Language Processing Associations) is the organization for coordinating the natural language processing related activities and events in the Asia-Pacific region. == Foundation == AFNLP was founded on 4 October 2000. == Member Associations == ALTA – Australasian Language Technology Association ANLP Japan Association of Natural Language Processing ROCLING Taiwan ROC Computational Linguistics Society SIG-KLC Korea SIG-Korean Language Computing of Korea Information Science Society == Existing Asian Initiatives == NLPRS: Natural Language Processing Pacific Rim Symposium IRAL: International Workshop on Information Retrieval with Asian Languages PACLING: Pacific Association for Computational Linguistics PACLIC: Pacific Asia Conference on Language, Information and Computation PRICAI: Pacific Rim International Conference on AI ICCPOL: International Conference on Computer Processing of Oriental Languages ROCLING: Research on Computational Linguistics Conference == Conferences == IJCNLP-04: The 1st International Joint Conference on Natural Language Processing in Hainan Island, China IJCNLP-05: The 2nd International Joint Conference on Natural Language Processing in Jeju Island, Korea IJCNLP-08: The 3rd International Joint Conference on Natural Language Processing in Hyderabad, India ACL-IJCNLP-2009: Joint Conference of the 47th Annual Meeting of the Association for Computational Linguistics (ACL) and 4th International Joint Conference on Natural Language Processing (IJCNLP) in Singapore IJNCLP-11: The 5th International Joint Conference on Natural Language Processing in Chiang Mai, Thailand
Read more →
Knowledge assessment methodology

The knowledge assessment methodology (KAM) is "an interactive benchmarking tool created by the World Bank's Knowledge for Development Program to help countries identify the challenges and opportunities they face in making the transition to the knowledge-based economy." KAM does so by providing information on knowledge economy indicators for 146 countries. Its products include the Knowledge Economy Index and the Knowledge Index.
Read more →
Azure Maps

Azure Maps is a suite of cloud-based, location-based services provided by Microsoft as part of the company's Azure platform. The platform provides geospatial and location-based services via REST APIs and software development kits (SDKs). The service is typically used to integrate maps or geospatial data into applications. Azure Maps differs from Microsoft's other enterprise mapping service, Bing Maps, in its pricing model, focus on privacy, and its level of integration into the broader Azure cloud ecosystem. == History == Azure Maps was first introduced in public preview mode under the name "Azure Location Based Services" in 2017, primarily as an enterprise solution. The services was intended to add mapping and location-based functionality onto the existing Azure cloud services suite, seen as a critical part of Microsoft's broader Internet-of-Things (IoT) strategy. The preview version included APIs which could be used to develop location aware apps for use cases such as logistics and mobility. In 2018, the software was renamed "Azure Maps," and became generally available to the public, and a number of new functions were added, including route calculation, travel time calculation, and incorporation of real-time traffic data and incident information. Azure Maps was integrated with Azure IoT Central in 2018, which added tracking, monitoring, and geofencing capabilities. A set of mobility APIs on were added in 2019, with applications such as use in public transport apps and shared bicycle fleet management. “Azure Maps Creator,” which converts private facility floor plans into indoor map data, was also introduced in 2019. Some commentators linked these services to Microsoft's broader development of augmented reality products. In 2020, Azure Maps Visual for Power BI was released, integrating location-based features and mapping capabilities into Microsoft's business intelligence software. An elevation API (which was later retired), geolocation services, and an iOS and Android software development kit were introduced in 2021. In 2022, support for historical weather, air quality, and tropical storm data was made generally available and custom styling for indoor maps was also introduced. In 2023, Azure Maps was certified as HIPAA compliant in a move to target healthcare and health insurance companies. == Functionality == === Geocoding === Geocoding is one of the core functionalities of Azure Maps, converting addresses or place names into geographic coordinates. Batch geocoding is used to process large amounts of address data, a function used for route optimization and spatial analysis. === Reverse geocoding === Reverse geocoding derives human-readable information from geographic coordinates like longitude and latitude, used in navigation and by geographic information systems. === Routing === Azure Maps uses map data and routing algorithms to calculate the shortest or fastest routes between locations based on factors like vehicle size and type, traffic conditions, and distance. Routing also supports multi-modal routing, which include multiple modes of transport in a single trip, including cycling, walking, and ferries. This functionality is used for location-based searches and route optimization in applications like fleet management, proximity marketing, and emergency services as well as logistics and delivery, urban planning, ride sharing apps, and outdoor activities. === Map visualization === The platform supports map visualizations that can be modified to reflect real-time data (including from IoT sensors) as well as historical data patterns. Visualizations include heat maps, street maps, satellite imagery and other custom data layers. Maps are rendered using raster or vector tiles which reduce the load of displaying large data sets or complex maps. This can be used in various applications in areas like transportation, smart cities, retail and marketing, public health, and environmental monitoring. For example, it can be used for tracking the spread of diseases or measuring the impact of changing climatic patterns. === Geofencing and spatial analytics === Azure Maps supports polygonal geofencing, which enables the definition of custom geographic boundaries. Geofenced areas can be monitored in real-time for events of interest. For example, an application could send an alert when equipment or persons enter or leave a defined area. Tools for analyzing historical geofencing data are also available via the APIs for optimization purposes. == Industry usage == Azure Maps' geofencing function has seen usage in the construction industry, designating hazardous areas for safety purposes and sending alerts if anyone enters the area. Private facility maps are used by construction companies for monitoring large construction sites to increase productivity and prevent accidents or damage. In emergency management, New Zealand based company Beca has used Azure Maps to provide analysis on the impact of earthquakes to users, including information on the severity and location of an earthquake and the impact on affected properties. Alaska's Department of Transportation uses Azure Maps as part of an information system providing weather-related warnings and analytics to road crews. Airmap, an airspace management platform for drones, uses Azure Maps. Azure Maps has also been used in conjunction with Azure Monitor for risk monitoring by an insurance company. Other companies that use or have used Azure Maps include BMW, Banco Santander, Jvion, MV Transportation, C.H. Robertson, Wise Skulls, Tata Consultancy Services, Providence Health and Services, Gas Brasiliano Distribuidora S.A., Shell plc, Persistent Systems, Phase 2 Dining and Entertainment, Symbio, HID, Globant, and Insight Enterprises. == Partnerships == Azure Maps and TomTom have been partners since 2016, and TomTom provides location data to Azure Maps and can process data from Azure Maps for mapping purposes. In 2021, Azure Maps partnered with AccuWeather to make climatic data available via its APIs, making weather data along all parts of calculated routes available for mobility and logistics purposes. Microsoft has partnered with Esri, the developer of ArcGIS, and there is cross-compatibility between Azure and ArcGIS so that data from Azure Maps can be integrated into ArcGIS and vice versa. Azure Maps partnered with Moovit in 2019, a startup providing software that interfaces with public transport data. Moovit's database on global public transit networks, including information on which stations and facilities are wheelchair accessible, was linked to Azure Maps. This service was noted for its use increasing accessibility to public transport for the visually impaired by means of voice activated route planning assistance. NORAD has used some Azure Maps functions for their NORAD Tracks Santa website during Christmas holidays. == Components == === REST APIs === Various APIs cover the major functionalities across Azure Maps: Data registry API Geolocation API Render API Route API Search API Spatial API Time zone API Traffic API Weather API === SDKs === Azure Maps SDKs uses MapLibre-style specifications and open source MapLibre GL-based libraries as a rendering engine. The Web SDK is used for developing web apps with maps and location-based data and functionality. It includes a map control module as well as modules with drawing tools. It also supports Azure Maps Creator and various spatial data formats. The platform also includes a set of REST SDKs for developers integrating Azure Maps REST APIs into Python, C#, Java or JavaScript applications. Azure Maps also includes Android and iOS SDKs used for developing applications for Android and Apple devices. === Azure Maps Creator === Azure Maps Creator is a tool for generating custom maps for locations like large office complexes, construction sites, or university campuses. These maps can then be integrated into applications and used with other Azure Maps functions for purposes such as wayfinding and maintenance and security in building automation contexts. === Azure Maps Visual for Power BI === Azure Maps is integrated with Microsoft Power BI, a graphical tool for producing data visualizations. Since July 2020, Power BI can be used in conjunction with Azure Maps for developing map-based data visualizations. This functionality entered general availability in May 2023.
Read more →
Deep image prior

Deep image prior is a type of convolutional neural network used to enhance a given image with no prior training data other than the image itself. A neural network is randomly initialized and used as prior to solve inverse problems such as noise reduction, super-resolution, and inpainting. Image statistics are captured by the structure of a convolutional image generator rather than by any previously learned capabilities. == Method == === Background === Inverse problems such as noise reduction, super-resolution, and inpainting can be formulated as the optimization task x ∗ = m i n x E ( x ; x 0 ) + R ( x ) {\displaystyle x^{}=min_{x}E(x;x_{0})+R(x)} , where x {\displaystyle x} is an image, x 0 {\displaystyle x_{0}} a corrupted representation of that image, E ( x ; x 0 ) {\displaystyle E(x;x_{0})} is a task-dependent data term, and R(x) is the regularizer. Deep neural networks learn a generator/decoder x = f θ ( z ) {\displaystyle x=f_{\theta }(z)} which maps a random code vector z {\displaystyle z} to an image x {\displaystyle x} . The image corruption method used to generate x 0 {\displaystyle x_{0}} is selected for the specific application. === Specifics === In this approach, the R ( x ) {\displaystyle R(x)} prior is replaced with the implicit prior captured by the neural network (where R ( x ) = 0 {\displaystyle R(x)=0} for images that can be produced by a deep neural networks and R ( x ) = + ∞ {\displaystyle R(x)=+\infty } otherwise). This yields the equation for the minimizer θ ∗ = a r g m i n θ E ( f θ ( z ) ; x 0 ) {\displaystyle \theta ^{}=argmin_{\theta }E(f_{\theta }(z);x_{0})} and the result of the optimization process x ∗ = f θ ∗ ( z ) {\displaystyle x^{}=f_{\theta ^{}}(z)} . The minimizer θ ∗ {\displaystyle \theta ^{}} (typically a gradient descent) starts from a randomly initialized parameters and descends into a local best result to yield the x ∗ {\displaystyle x^{}} restoration function. ==== Overfitting ==== A parameter θ may be used to recover any image, including its noise. However, the network is reluctant to pick up noise because it contains high impedance while useful signal offers low impedance. This results in the θ parameter approaching a good-looking local optimum so long as the number of iterations in the optimization process remains low enough not to overfit data. === Deep Neural Network Model === Typically, the deep neural network model for deep image prior uses a U-Net like model without the skip connections that connect the encoder blocks with the decoder blocks. The authors in their paper mention that "Our findings here (and in other similar comparisons) seem to suggest that having deeper architecture is beneficial, and that having skip-connections that work so well for recognition tasks (such as semantic segmentation) is highly detrimental." == Applications == === Denoising === The principle of denoising is to recover an image x {\displaystyle x} from a noisy observation x 0 {\displaystyle x_{0}} , where x 0 = x + ϵ {\displaystyle x_{0}=x+\epsilon } . The distribution ϵ {\displaystyle \epsilon } is sometimes known (e.g.: profiling sensor and photon noise) and may optionally be incorporated into the model, though this process works well in blind denoising. The quadratic energy function E ( x , x 0 ) = | | x − x 0 | | 2 {\displaystyle E(x,x_{0})=||x-x_{0}||^{2}} is used as the data term, plugging it into the equation for θ ∗ {\displaystyle \theta ^{}} yields the optimization problem m i n θ | | f θ ( z ) − x 0 | | 2 {\displaystyle min_{\theta }||f_{\theta }(z)-x_{0}||^{2}} . === Super-resolution === Super-resolution is used to generate a higher resolution version of image x. The data term is set to E ( x ; x 0 ) = | | d ( x ) − x 0 | | 2 {\displaystyle E(x;x_{0})=||d(x)-x_{0}||^{2}} where d(·) is a downsampling operator such as Lanczos that decimates the image by a factor t. === Inpainting === Inpainting is used to reconstruct a missing area in an image x 0 {\displaystyle x_{0}} . These missing pixels are defined as the binary mask m ∈ { 0 , 1 } H × V {\displaystyle m\in \{0,1\}^{H\times V}} . The data term is defined as E ( x ; x 0 ) = | | ( x − x 0 ) ⊙ m | | 2 {\displaystyle E(x;x_{0})=||(x-x_{0})\odot m||^{2}} (where ⊙ {\displaystyle \odot } is the Hadamard product). The intuition behind this is that the loss is computed only on the known pixels in the image, and the network is going to learn enough about the image to fill in unknown parts of the image even though the computed loss doesn't include those pixels. This strategy is used to remove image watermarks by treating the watermark as missing pixels in the image. === Flash–no-flash reconstruction === This approach may be extended to multiple images. A straightforward example mentioned by the author is the reconstruction of an image to obtain natural light and clarity from a flash–no-flash pair. Video reconstruction is possible but it requires optimizations to take into account the spatial differences. == Implementations == A reference implementation rewritten in Python 3.6 with the PyTorch 0.4.0 library was released by the author under the Apache 2.0 license: deep-image-prior A TensorFlow-based implementation written in Python 2 and released under the CC-SA 3.0 license: deep-image-prior-tensorflow A Keras-based implementation written in Python 2 and released under the GPLv3: machine_learning_denoising == Example == See Astronomy Picture of the Day (APOD) of 2024-02-18
Read more →
Referring expression generation

Referring expression generation (REG) is the subtask of natural language generation (NLG) that received most scholarly attention. While NLG is concerned with the conversion of non-linguistic information into natural language, REG focuses only on the creation of referring expressions (noun phrases) that identify specific entities called targets. This task can be split into two sections. The content selection part determines which set of properties distinguish the intended target and the linguistic realization part defines how these properties are translated into natural language. A variety of algorithms have been developed in the NLG community to generate different types of referring expressions. == Types of referring expressions == A referring expression (RE), in linguistics, is any noun phrase, or surrogate for a noun phrase, whose function in discourse is to identify some individual object (thing, being, event...) The technical terminology for identify differs a great deal from one school of linguistics to another. The most widespread term is probably refer, and a thing identified is a referent, as for example in the work of John Lyons. In linguistics, the study of reference relations belongs to pragmatics, the study of language use, though it is also a matter of great interest to philosophers, especially those wishing to understand the nature of knowledge, perception and cognition more generally. Various devices can be used for reference: determiners, pronouns, proper names... Reference relations can be of different kinds; referents can be in a "real" or imaginary world, in discourse itself, and they may be singular, plural, or collective. === Pronouns === The simplest type of referring expressions are pronoun such as he and it. The linguistics and natural language processing communities have developed various models for predicting anaphor referents, such as centering theory, and ideally referring-expression generation would be based on such models. However most NLG systems use much simpler algorithms, for example using a pronoun if the referent was mentioned in the previous sentence (or sentential clause), and no other entity of the same gender was mentioned in this sentence. === Definite noun phrases === There has been a considerable amount of research on generating definite noun phrases, such as the big red book. Much of this builds on the model proposed by Dale and Reiter. This has been extended in various ways, for example Krahmer et al. present a graph-theoretic model of definite NP generation with many nice properties. In recent years a shared-task event has compared different algorithms for definite NP generation, using the TUNA corpus. === Spatial and temporal reference === Recently there has been more research on generating referring expressions for time and space. Such references tend to be imprecise (what is the exact meaning of tonight?), and also to be interpreted in different ways by different people. Hence it may be necessary to explicitly reason about false positive vs false negative tradeoffs, and even calculate the utility of different possible referring expressions in a particular task context. === Criteria for good expressions === Ideally, a good referring expression should satisfy a number of criteria: Referential success: It should unambiguously identify the referent to the reader. Ease of comprehension: The reader should be able to quickly read and understand it. Computational complexity: The generation algorithm should be fast No false inferences: The expression should not confuse or mislead the reader by suggesting false implicatures or other pragmatic inferences. For example, a reader may be confused if he is told Sit by the brown wooden table in a context where there is only one table. == History == === Pre-2000 era === REG goes back to the early days of NLG. One of the first approaches was done by Winograd in 1972 who developed an "incremental" REG algorithm for his SHRDLU program. Afterwards researchers started to model the human abilities to create referring expressions in the 1980s. This new approach to the topic was influenced by the researchers Appelt and Kronfeld who created the programs KAMP and BERTRAND and considered referring expressions as parts of bigger speech acts. Some of their most interesting findings were the fact that referring expressions can be used to add information beyond the identification of the referent as well as the influence of communicative context and the Gricean maxims on referring expressions. Furthermore, its skepticism concerning the naturalness of minimal descriptions made Appelt and Kronfeld's research a foundation of later work on REG. The search for simple, well-defined problems changed the direction of research in the early 1990s. This new approach was led by Dale and Reiter who stressed the identification of the referent as the central goal. Like Appelt they discuss the connection between the Gricean maxims and referring expressions in their culminant paper in which they also propose a formal problem definition. Furthermore, Reiter and Dale discuss the Full Brevity and Greedy Heuristics algorithms as well as their Incremental Algorithm(IA) which became one of the most important algorithms in REG. === Later developments === After 2000 the research began to lift some of the simplifying assumptions, that had been made in early REG research in order to create more simple algorithms. Different research groups concentrated on different limitations creating several expanded algorithms. Often these extend the IA in a single perspective for example in relation to: Reference to Sets like "the t-shirt wearers" or "the green apples and the banana on the left" Relational Descriptions like "the cup on the table" or "the woman who has three children" Context Dependency, Vagueness and Gradeability include statements like "the older man" or "the car on the left" which are often unclear without a context Salience and Generation of Pronouns are highly discourse dependent making for example "she" a reference to "the (most salient) female person" Many simplifying assumptions are still in place or have just begun to be worked on. Also a combination of the different extensions has yet to be done and is called a "non-trivial enterprise" by Krahmer and van Deemter. Another important change after 2000 was the increasing use of empirical studies in order to evaluate algorithms. This development took place due to the emergence of transparent corpora. Although there are still discussions about what the best evaluation metrics are, the use of experimental evaluation has already led to a better comparability of algorithms, a discussion about the goals of REG and more task-oriented research. Furthermore, research has extended its range to related topics such as the choice of Knowledge Representation(KR) Frameworks. In this area the main question, which KR framework is most suitable for the use in REG remains open. The answer to this question depends on how well descriptions can be expressed or found. A lot of the potential of KR frameworks has been left unused so far. Some of the different approaches are the usage of: Graph search which treats relations between targets in the same way as properties. Constraint Satisfaction which allows for a separation between problem specification and the implementation. Modern Knowledge Representation which offers logical inference in for example Description Logic or Conceptual Graphs. == Problem definition == Dale and Reiter (1995) think about referring expressions as distinguishing descriptions. They define: The referent as the entity that should be described The context set as set of salient entities The contrast set or potential distractors as all elements of the context set except the referent A property as a reference to a single attribute–value pair Each entity in the domain can be characterised as a set of attribute–value pairs for example ⟨ {\displaystyle \langle } type, dog ⟩ {\displaystyle \rangle } , ⟨ {\displaystyle \langle } gender, female ⟩ {\displaystyle \rangle } or ⟨ {\displaystyle \langle } age, 10 years ⟩ {\displaystyle \rangle } . The problem then is defined as follows: Let r {\displaystyle r} be the intended referent, and C {\displaystyle C} be the contrast set. Then, a set L {\displaystyle L} of attribute–value pairs will represent a distinguishing description if the following two conditions hold: Every attribute–value pair in L {\displaystyle L} applies to r {\displaystyle r} : that is, every element of L {\displaystyle L} specifies an attribute–value that r {\displaystyle r} possesses. For every member c {\displaystyle c} of C {\displaystyle C} , there is at least one element l {\displaystyle l} of L {\displaystyle L} that does not apply to c {\displaystyle c} : that is, there is an l {\displaystyle l} in L {\displaystyle L} that specifies an attribute–value that c {\displaystyle c} does not possess. l {\displaystyle l} is said
Read more →
LTX (text-to-video model)

LTX is a family of open source artificial intelligence video foundation models developed by Lightricks, and first released in November 2024. The latest models, LTX-2, create videos based on user prompts. They were preceded by LTX Video, which was released in 2024 as the company's first text-to-video model. LTX-2 is part of the LTX family of video generation models, which form the core technology, alongside LTX Studio, of the LTX ecosystem. == History == === Origins: LTX Video (2024–2025) === In November 2024 Lightricks publicly released its first text-to-video model, LTX Video. It was a 2-billion parameter model, available as open source. In May 2025 Lightricks launched LTXV-13b, a version with 13-billion parameters. Two months later, the model broke the 60 second barrier for generated video. === Release of LTX-2 (2025) === In October 2025 Lightricks announced its latest model, and renamed it LTX-2. The model was described as capable of generating synchronized audio and video at native 4K resolution and up to 50 frames per second (fps), using a variety of conditions and prompts, including text-to-video and image-to-video. Google highlighted the fact that LTX-2 was trained on its infrastructure, and saying it was "The first open source AI video generation model, powered by Google Cloud". Upon its release it was ranked in the top-3 models for image-to-video creation by Artificial Analysis, behind Kling 3.5 by Kling AI and Veo 3.1 by Google. Its text-to-image option was ranked 7th. In addition to its open-source release, Lightricks offers API access to LTX-2, allowing developers to generate videos from text and image prompts through a hosted service without running the model locally. === Open Source Release (2026) === In January 2026, Lightricks officially released the full open-source version of LTX-2, making the model’s complete codebase, weights, and associated tooling publicly available. In March 2026 the company released LTX-2.3, which was accompanied by a desktop video editor enabling the entire model to run locally on consumer hardware. == Technical features == === Advancements over LTX Video === LTX-2 builds upon the LTX Video architecture with several major improvements: Unified audio-video generation producing synchronized dialogue, ambience, and motion Native 4K rendering 50-fps output for cinematic motion Three operational modes (Fast, Pro, Ultra) More efficient diffusion pipelines enabling high fidelity on consumer GPUs === Core capabilities === Text-to-video generation Image-to-video generation Multimodal audiovisual synthesis High-resolution spatial and temporal coherence Configurable quality/performance settings Open-source distribution of weights and datasets == Reception == Initial reception to LTX-2 was broadly positive, with several technology and media outlets highlighting its open-source approach and multimodal capabilities. Open Source For You described LTX-2 as “one of the first AI video systems to combine 4K output, synchronized audio, and an open model release,” noting that it positioned Lightricks as a significant competitor to proprietary systems such as OpenAI's Sora and Google's Veo. IEA Green said that the model “could rewrite the AI filmmaking game,” emphasizing that its 50-fps rendering and unified audio-video generation made it suitable for professional studios and independent creators alike. AI News characterized LTX-2 as a “major step forward in the democratization of cinematic-quality video generation,” praising its consumer-grade hardware efficiency and multi-tier generation modes, while also noting ongoing challenges in long-form temporal stability. FinancialContent reported strong interest among creative agencies, attributing the attention to Lightricks’ decision to release model weights and datasets, which reviewers said enabled “a level of transparency not typically seen in commercial AI video models.” === Benchmarks and rankings === Upon release, LTX-2 ranked third for image-to-video creation in the Artificial Analysis benchmark, behind Kling 3.5 and Veo 3.1, while its text-to-video option ranked seventh. As of early 2026, it was the highest-ranked open-source model in the benchmark. === Limitations === Some early reviewers also pointed out quality limitations. The Ray3 technical review noted occasional inconsistencies in lip-sync and motion tracking during long scenes, though it stated these were “in line with the challenges faced by all current AI video diffusion models” and expected to improve with continued iteration. Like other diffusion-based video generators, LTX-2 can produce artifacts in complex multi-person scenes and may struggle with precise text rendering within generated video.
Read more →
CloudSim

CloudSim is a framework for modeling and simulation of cloud computing infrastructures and services. Originally built primarily at the Cloud Computing and Distributed Systems (CLOUDS) Laboratory, the University of Melbourne, Australia, CloudSim has become one of the most popular open source cloud simulators in the research and academia. CloudSim is completely written in Java. The latest version of CloudSim is CloudSim v6.0.0-beta on GitHub. Cloudsim is suitable for implementing simulations scenarios based on Infrastructure as a service as well as with latest version Platform as a service, so get started here == CloudSim extensions == Initially developed as a stand-alone cloud simulator, CloudSim has further been extended by independent researchers. GPUCloudSim is an enhanced CloudSim tool for modeling GPU-based cloud infrastructures and data centers. It offers simulations for multi-GPU setups, customizable GPU policies, GPU remoting, etc. It also examines performance impacts and interactions within virtualized GPU environments. CloudSim Plus is a totally re-engineered CloudSim fork providing general-purpose cloud computing simulation and exclusive features such as: multi-cloud simulations, vertical and horizontal VM scaling, host fault injection and recovery, joint power- and network-aware simulations and more. Though CloudSim itself does not have a graphical user interface, extensions such as CloudReports offer a GUI for CloudSim simulations. CloudSimEx extends CloudSim by adding MapReduce simulation capabilities and parallel simulations. Cloud2Sim extends CloudSim to execute on multiple distributed servers, by leveraging Hazelcast distributed execution framework. RECAP DES extends the CloudSim Plus framework to model synchronous hierarchical architectures (such as ElasticSearch). ThermoSim extends CloudSim toolkit by incorporating thermal characteristics, and uses Deep learning-based temperature predictor for cloud nodes.
Read more →
SGT STAR

SGT STAR, also known as Sgt. Star or Sergeant Star, was a chatbot operated by the United States Army to answer questions about recruitment. == Background == After the September 11 attacks, traffic increased significantly to chatrooms on the U.S. Army's website, goarmy.com, increasing costs of staffing the live chatrooms. As a cost-cutting measure, the SGT STAR project was initiated as a partnership between the United States Army Accessions Command and Spectre AI, a wholly owned subsidiary of Next IT. Next IT, a Spokane, Washington-based company deploys "intelligent virtual assistants," using its software dubbed "ActiveAgent" which is a framework for functional presence engines. Testing began in 2003, and SGT STAR launched to the public in 2006. "STAR" is an acronym for "strong, trained and ready." SGT STAR was launched as a chat interface on goarmy.com, but has since been developed as a mobile application, as well as a life-size animated projection that has appeared live at public events. SGT STAR can also interact with users on Facebook. == FOIA request == In 2013, the Electronic Frontier Foundation filed a Freedom of Information Act request to learn more about SGT STAR, including input and output patterns (questions and answers), usage statistics, contracts, and privacy policies. They received these records in April 2014, after coverage from various media outlets and a tongue-in-cheek campaign to "Free Sgt. Star."
Read more →
TipTop Technologies

TipTop Technologies is a real-time web and social search engine with a platform for semantic analysis of natural language. Tip-Top Search provides results capturing individual and group sentiment, opinions, and experiences there from the content of various sorts such as real-time messages from Twitter or consumer product reviews on Amazon.com. TipTop Technologies and ITC Infotech collaborated to create a search interface suitable for both enterprise and consumer applications. Tip-Top's products are part of the "emerging Web 3.0 applications which use semantic technologies to augment the underlying Web system's functionalities." Their main product is 360, an AI tool that incorporates multiple AI applications under one wing. Jonathan AlBright professor at Elon University, found videos generated by TipTop Technologies software on YouTube in his research into artificial intelligence, described it as AI-generated "fake news". Through semantic analysis of large data sets, TipTop gleaned behavioral insights from Tweets around events like Halloween, Thanksgiving, Holiday Gifting, the Super Bowl, and the Oscar Nominees for the Academy Awards coverage. Sentiment analysis, concept trend tracking, and real-time market research are other applications included in the TipTop Search product. TipTop's insight engine solves the problem of real-time data noise, and its ability to "sort the 'good tweets' from the 'bad tweets' when it comes to a product, service, or a region..." In addition, products like TipTop Shopping with customizable search widgets bring together consumer reviews, social search, and sentiment analysis enabling product comparisons across attributes like the overall value and aiding purchasing decisions through user-driven product tips and pits. TipTop Finance adds another complexity to real-time search results by incorporating corporate sentiment, company stock tickers, and social media into TipTop's existing social search platform. Additional success applying semantic technologies has been with polling, "if you compare these Gallup results with TipTop, a sentiment engine based on Twitter, the results are not way off. It does surprise you but it tells me that sentiment analysis in case of public opinion about a burning social issue or a famous personality is relatively easier." With the increasing amount of unstructured, opinion-oriented, and user-generated content available on the Web, TipTop's technology aims to make sense of all this data, and deliver it in a useful way for consumer and enterprise users alike. TipTop Technologies is a privately held company with its headquarters in the San Francisco Bay Area, and team members are located globally.
Read more →