AI Writing Helper

AI Writing Helper — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Simple interactive object extraction

Simple interactive object extraction (SIOX) is an algorithm for extracting foreground objects from color images and videos with very little user interaction. It has been implemented as "foreground selection" tool in the GIMP (since version 2.3.3), as part of the tracer tool in Inkscape (since 0.44pre3), and as function in ImageJ and Fiji (plug-in). Experimental implementations were also reported for Blender and Krita. Although the algorithm was originally designed for videos, virtually all implementations use SIOX primarily for still image segmentation. In fact, it is often said to be the current de facto standard for this task in the open-source world. Initially, a free hand selection tool is used to specify the region of interest. It must contain all foreground objects to extract and as few background as possible. The pixels outside the region of interest form the sure background while the inner region define a superset of the foreground, i.e. the unknown region. A so-called foreground brush is then used to mark representative foreground regions. The algorithm outputs a selection mask. The selection can be refined by either adding further foreground markings or by adding background markings using the background brush. Technically, the algorithm performs the following steps: Create a set of representative colors for sure foreground and sure background, the so-called color signatures. Assign all image points to foreground or background by a weighted nearest neighbor search in the color signatures. Apply some standard image processing operations like erode, dilate, and blur to remove artifacts. Find the connected foreground components that are either large enough or marked by the user. For video segmentation the sure background and sure foreground regions are learned from motion statistics. SIOX also features tools that allow sub-pixel accurate refinement of edges and high texture areas, the so-called "detail refinement brushes". As with all segmentation algorithms, there are always pictures where the algorithm does not yield perfect results. The most critical drawback of SIOX is the color dependence. Although many photos are well-separable by color, the algorithm cannot deal with camouflage. If the foreground and background share many identical shades of similar colors, the algorithm might give a result with parts missing or incorrectly classified foreground. SIOX performs about equally well on different benchmarks compared to graph-based segmentation methods, such as Grabcut. SIOX is, however, more noise robust and can therefore also be used for the segmentation of videos. Graph-based segmentation methods search for a minimum cut and therefore tend to not perform optimally with complex structures. The algorithm has initially been developed at the department of computer science at Freie Universitaet Berlin. The main developer, Gerald Friedland, is now faculty at the EECS department of the University of California at Berkeley and also a Principal Data Scientist at Lawrence Livermore National Lab. He continues to support the development through mentoring, e.g. in the Google Summer of Code.
Read more →
Cups (app)

Cups (stylized as CUPS) was a mobile app launched in New York City in April 2014. It was a mobile payment and discovery platform for independent coffee shops nearby. The app was active in more than 400 cafes in New York, San Francisco, Philadelphia, Nashville, Minneapolis and Saint Paul, and other U.S. cities. == History == Cups was founded in Israel in 2012 by Gilad Rotem and four other co-founders, who were all high school friends. The company ran a limited beta pilot in Tel Aviv and Jerusalem, featuring 80 locations, from September 2012 until September 2014. Customers received all-you-can-drink coffee at certain coffee shops in Tel Aviv for approximately $45 a month. In October 2013, the founders relocated to New York. Cups participated in the Entrepreneur's Roundtable Accelerator program and went live in New York in 2014, initially working with 50 small coffee shops in Manhattan and Brooklyn. In early 2016, the company launched 30 locations in Philadelphia in February, followed by 40 more locations in San Francisco in March. == Functionality == The Cups app gave the user a list of the nearest participating coffee shops to their current location. The app user can order a drink using the app and pay the cashier with their phone. The cashier would enter a code that entered the purchase into the app's system. The app also allowed for onboard tipping and food purchases. The company reimbursed the coffee shop and kept a portion of their sales. In early 2016, the Cups Café Network was launched, using bulk purchasing power to land discounts with service providers which would normally be reserved for larger chains. In this way, the company aimed to help its café partners compete with the larger coffee chains.
Read more →
Cheekd

Cheekd is a dating app based in New York City. It was founded in 2010 by Lori Cheek. == History == The service debuted with the name "Cheek'd". Founder Lori Cheek appeared on the television program, Shark Tank in February 2014, but did not succeed in obtaining funding from any of the five judges. She said Cheek’d only had 1000 subscribers at that time. === Business card model === Cheek'd offered two plans, paid and free. For $25, subscribers got a set of 50 business cards that could be given out once someone caught their eye. Each card had a phrase, an online code, and a URL to the subscriber's account. Recipients could look up the giver's profile. In addition to purchasing cards, there was a $9.95 monthly membership fee. === Smartphone app === In 2015, the service's name changed from "Cheek'd" to "Cheekd". The new app used Bluetooth technology to alert users whenever a compatible user was within a 30-foot radius, instead of using cards. == Patent lawsuit == The original business card-based model for Cheekd had been claimed as a patented process by Lori Cheek, as U.S. patent 8,543,465. In September 2017, a complaint was filed, alleging that the idea was not original to Lori Cheek. Cheek responded, stating that the complaint was baseless, and a complete fabrication. The lawsuit Pirri v. Cheek was dismissed in a pre-trial conference in New York's Federal Court on April 5, 2018.
Read more →
LCD crosstalk

LCD crosstalk is a visual defect in an LCD screen which occurs because of interference between adjacent pixels. Owing to the way rows and columns in the display are addressed, and charge is pushed around, the data on one part of the display has the potential to influence what is displayed elsewhere. This is generally known as crosstalk, and in matrix displays typically occurs in the horizontal and vertical directions. Crosstalk used to be a serious problem in the old passive-matrix (STN) displays, but is rarely discernable in modern active-matrix (TFT) displays. A fortunate side effect of inversion (see above) is that, for most display material, what little crosstalk there is largely cancelled out. For most practical purposes, the level of crosstalk in modern LCDs is negligible. Certain patterns, particularly those involving fine dots, can interact with the inversion and reveal visible crosstalk. If you try moving a small Window in front of the inversion pattern (above) which makes your screen flicker the most, you may well see crosstalk in the surrounding pattern. Different patterns are required to reveal crosstalk on different displays (depending on their inversion scheme).
Read more →
Josh (app)

Josh (stylized as JOSH) was a video-sharing social networking service but it has since evolved into a live call and chat application owned by VerSe Innovation – an Indian technology company based in Bangalore, India. Josh was an Indian short video app that was launched in immediately after the Indian Government banned TikTok and other Chinese apps in June 2020. The founders of the platform have promoted the app as the “Instagram for Bharat” referring to their focus on the Indian audience that speaks its own regional and state languages. Josh was among the top 10 most downloaded apps social and entertainment apps in India of 2021 and had 150 million monthly active users as per April 2022. The word 'Josh' translates to fervour or passion. The app was launched under the aegis of the Atmanirbhar Bharat campaign and to compete with the duopoly of Google and Facebook in India. Josh's parent company VerSe Innovations Pvt. Ltd. owns another startup Dailyhunt, which a content and news aggregator application. Both Dailyhunt and Josh are a part of the VerSe's focus on the "next billion" regional language users of India. Founders Virendra Gupta and Umang Bedi conceptualised Josh as a short-video platform that made content creation accessible to vernacular language users, essentially the non-English speaking audience in India. == Features == Josh is currently available in 12 Indian languages and allows users to upload, share, remix bite-sized videos of up to 120 seconds. There are various categories across the video section including viral, trending, glamour, dance, devotion, yoga and cooking among others. Similar to Instagram and TikTok, it has a video feed which is curated for individuals on the basis of their app behaviour. The app hosts many daily, weekly and monthly social media challenges. == Funding == In December 2020, within 3 months of its launch, Josh's parent app VerSe Innovation raised more than $100 million from investors including Alphabet Inc's Google and Microsoft. In February 2021, VerSe Innovation raised $100 million in Series H funding from Qatar Investment Authority, the sovereign wealth fund of the State of Qatar, and Glade Brook Capital Partners. In August 2021, VerSe raised over $450 million in its Series I financing round with a valuation of $1 billion. Investors included Canada Pension Plan Investment Board (CPPIB), Siguler Guff, Baillie Gifford, Carlyle Asia Partners Growth II affiliates, and others. The startup announced its plan to expand overseas and broaden its ecommerce play for both Dailyhunt and Josh. In April 2022, VerSe announced that it has raised $805 million in funding from investors at a valuation of nearly $5 billion. ByteDance Offloads Stake In Josh Parent VerSe, Exits At 56% Discount == Partnerships == In February 2021, Saregama and Josh signed a music licensing deal, wherein Josh expanded its musical library with 1.3 lakh songs from Saregama in 25 different languages. To improve their user experience, Josh partnered with computer vision company D-ID in August 2021. The company helped Josh introduce photo-to-video features, live portrait technology, animate their photos etc. In order to solidify their efforts in enhancing Josh, VerSe acquired Indian social networking platform GolBol in October 2021. The move came as an effort by the startup to strengthen their discovery initiatives on the platform and classify content at scale and understand the core behaviour of Indian regional audiences. Josh has also announced its plans to include live commerce as a potential revenue stream through its partnership with multiple large e-commerce players. == Notable campaigns == Say No To Dowry – In association with Josh, the Kerala Police partook in the #SayNo2Dowry online social media campaign that was started to highlight and stop the social evil in the state. Salute India – Josh entered the Guinness World Records by creating the largest online video album of people saluting (29,529). It organised an online campaign #SaluteIndia on the app during the 75th Independence Day of India during 10–15 August 2021.
Read more →
Procreate (software)

Procreate is a raster graphics editor app for digital painting developed and published by the Australian company Savage Interactive for iOS and iPadOS. It was launched on the App Store in 2011. == Versions == === Procreate === Procreate for iPad was first released in 2011 by the Tasmanian software company Savage Interactive. In June 2013, Savage launched Procreate 2 in conjunction with iOS 7, adding new features such as higher resolution capabilities and more brush options. In 2016, Procreate became one of the top ten best-selling iPad apps on the App Store. In 2018, Procreate became the overall best selling iPad app. With iOS 26, Procreate adapted Liquid Glass into its software. As of March 2026, the most recent version of Procreate for the iPad is 5.4.9. === Procreate Pocket === Procreate Pocket was released to the App Store in December 2014. In 2018, Savage launched Procreate Pocket 2.0 to the App Store. In December 2018, Procreate Pocket received Apple's "App of the Year" award. As of September 2025, the most recent version of Procreate Pocket (for the iPhone) is 4.0.15. === Procreate Dreams === Procreate Dreams, their more recent app focused on 2D animation, was released on the App Store on November 22, 2023. While the application is commended for its intuitive interface and accessibility, some reviewers have noted that it may lack some key animations features, such as reference layers. In June 2024, Procreate Dreams received the 2024 Apple Design Award for Innovation. In December 2025, Savage Interactive released Procreate Dreams 2, a long awaited update and redesign to Procreate Dreams. == Features == The current versions of Procreate use Valkyrie, a proprietary graphics engine to allow customisable brush options and importing brushes from Adobe Photoshop. Procreate offers known features like layers, masks, and blending mode. Its biggest standout compared to other professional drawing software is its simple UI and comparatively easy learning curve. The app also allows for animation. Savage expanded upon Procreate's animation features with a companion app dedicated to 2D animation called Procreate Dreams, released in November 2023. On August 2024, Procreate announced that it would not be incorporating generative artificial intelligence into its software. Savage offers a free internet forum called Procreate Discussions in which users can ask for help, suggest ideas, and share user-generated content on the marketplace or the resources board. == Notable users == Concept artist Doug Chiang creates robot, vehicle, and creature designs for Star Wars in Procreate. Professional artists have also used Procreate to create the posters for Stranger Things, Logan, and Blade Runner 2049, as well as several covers for The New Yorker. It has also been professionally adopted at Marvel Comics, DC Comics, Disney Animation, and Pixar.
Read more →
Landweber iteration

The Landweber iteration or Landweber algorithm is an algorithm to solve ill-posed linear inverse problems, and it has been extended to solve non-linear problems that involve constraints. The method was first proposed in the 1950s by Louis Landweber, and it can be now viewed as a special case of many other more general methods. == Basic algorithm == The original Landweber algorithm attempts to recover a signal x from (noisy) measurements y. The linear version assumes that y = A x {\displaystyle y=Ax} for a linear operator A. When the problem is in finite dimensions, A is just a matrix. When A is nonsingular, then an explicit solution is x = A − 1 y {\displaystyle x=A^{-1}y} . However, if A is ill-conditioned, the explicit solution is a poor choice since it is sensitive to any noise in the data y. If A is singular, this explicit solution doesn't even exist. The Landweber algorithm is an attempt to regularize the problem, and is one of the alternatives to Tikhonov regularization. We may view the Landweber algorithm as solving: min x ‖ A x − y ‖ 2 2 / 2 {\displaystyle \min _{x}\|Ax-y\|_{2}^{2}/2} using an iterative method. The algorithm is given by the update x k + 1 = x k − ω A ∗ ( A x k − y ) . {\displaystyle x_{k+1}=x_{k}-\omega A^{}(Ax_{k}-y).} where the relaxation factor ω {\displaystyle \omega } satisfies 0 < ω < 2 / σ 1 2 {\displaystyle 0<\omega <2/\sigma _{1}^{2}} . Here σ 1 {\displaystyle \sigma _{1}} is the largest singular value of A {\displaystyle A} . If we write f ( x ) = ‖ A x − y ‖ 2 2 / 2 {\displaystyle f(x)=\|Ax-y\|_{2}^{2}/2} , then the update can be written in terms of the gradient x k + 1 = x k − ω ∇ f ( x k ) {\displaystyle x_{k+1}=x_{k}-\omega \nabla f(x_{k})} and hence the algorithm is a special case of gradient descent. For ill-posed problems, the iterative method needs to be stopped at a suitable iteration index, because it semi-converges. This means that the iterates approach a regularized solution during the first iterations, but become unstable in further iterations. The reciprocal of the iteration index 1 / k {\displaystyle 1/k} acts as a regularization parameter. A suitable parameter is found, when the mismatch ‖ A x k − y ‖ 2 2 {\displaystyle \|Ax_{k}-y\|_{2}^{2}} approaches the noise level. Using the Landweber iteration as a regularization algorithm has been discussed in the literature. == Nonlinear extension == In general, the updates generated by x k + 1 = x k − τ ∇ f ( x k ) {\displaystyle x_{k+1}=x_{k}-\tau \nabla f(x_{k})} will generate a sequence f ( x k ) {\displaystyle f(x_{k})} that converges to a minimizer of f whenever f is convex and the stepsize τ {\displaystyle \tau } is chosen such that 0 < τ < 2 / ( ‖ ∇ f ‖ 2 ) {\displaystyle 0<\tau <2/(\|\nabla f\|^{2})} where ‖ ⋅ ‖ {\displaystyle \|\cdot \|} is the spectral norm. Since this is special type of gradient descent, there currently is not much benefit to analyzing it on its own as the nonlinear Landweber, but such analysis was performed historically by many communities not aware of unifying frameworks. The nonlinear Landweber problem has been studied in many papers in many communities; see, for example. == Extension to constrained problems == If f is a convex function and C is a convex set, then the problem min x ∈ C f ( x ) {\displaystyle \min _{x\in C}f(x)} can be solved by the constrained, nonlinear Landweber iteration, given by: x k + 1 = P C ( x k − τ ∇ f ( x k ) ) {\displaystyle x_{k+1}={\mathcal {P}}_{C}(x_{k}-\tau \nabla f(x_{k}))} where P {\displaystyle {\mathcal {P}}} is the projection onto the set C. Convergence is guaranteed when 0 < τ < 2 / ( ‖ A ‖ 2 ) {\displaystyle 0<\tau <2/(\|A\|^{2})} . This is again a special case of projected gradient descent (which is a special case of the forward–backward algorithm) as discussed in. == Applications == Since the method has been around since the 1950s, it has been adopted and rediscovered by many scientific communities, especially those studying ill-posed problems. In X-ray computed tomography it is called simultaneous iterative reconstruction technique (SIRT). It has also been used in the computer vision community and the signal restoration community. It is also used in image processing, since many image problems, such as deconvolution, are ill-posed. Variants of this method have been used also in sparse approximation problems and compressed sensing settings.
Read more →
Glossary of robotics

Robotics is the branch of technology that deals with the design, construction, operation, structural disposition, manufacture and application of robots. Robotics is related to the sciences of electronics, engineering, mechanics, and software. The following is a list of common definitions related to the Robotics field. == A == Actuator: a motor that translates control signals into mechanical movement. The control signals are usually electrical but may, more rarely, be pneumatic or hydraulic. The power supply may likewise be any of these. It is common for electrical control to be used to modulate a high-power pneumatic or hydraulic motor. Aerobot: a robot capable of independent flight on other planets. A type of aerial robot. Arduino: The current platform of choice for small-scale robotic experimentation and physical computing. Artificial intelligence: is the intelligence of machines and the branch of computer science that aims to create it. Aura (satellite): a robotic spacecraft launched by NASA in 2004 which collects atmospheric data from Earth. Automaton: an early self-operating robot, performing exactly the same actions, over and over. Autonomous vehicle: a vehicle equipped with an autopilot system, which is capable of driving from one point to another without input from a human operator. == B == Biomimetic: See Bionics. Bionics: also known as biomimetics, biognosis, biomimicry, or bionical creativity engineering is the application of biological methods and systems found in nature to the study and design of engineering systems and modern technology. == C == CAD/CAM (computer-aided design and computer-aided manufacturing): These systems and their data may be integrated into robotic operations. Čapek, Karel: Czech author who coined the term 'robot' in his 1921 play, Rossum's Universal Robots. Chandra X-ray Observatory: a robotic spacecraft launched by NASA in 1999 to collect astronomical data. Cloud robotics: robots empowered with more capacity and intelligence from cloud. Combat, robot: a hobby or sport event where two or more robots fight in an arena to disable each other. This has developed from a hobby in the 1990s to several TV series worldwide. Cruise missile: a robot-controlled guided missile that carries an explosive payload. Cyborg: also known as a cybernetic organism, a being with both biological and artificial (e.g. electronic, mechanical or robotic) parts. == D == Degrees of freedom: the extent to which a robot can move itself; expressed in terms of Cartesian coordinates (x, y, and z) and angular movements (yaw, pitch, and roll). Delta robot: a tripod linkage, used to construct fast-acting manipulators with a wide range of movement. Drive Power: The energy source or sources for the robot actuators. == E == Emergent behaviour, a complicated resultant behaviour that emerges from the repeated operation of simple underlying behaviours. Envelope (Space), Maximum The volume of space encompassing the maximum designed movements of all robot parts including the end-effector, workpiece, and attachments. Explosive ordnance disposal robot A mobile robot designed to assess whether an object contains explosives; some carry detonators that can be deposited at the object and activated after the robot withdraws. == F == FIRST(For Inspiration and Recognition of Science and Technology): an organization founded by inventor Dean Kamen in 1989 in order to develop ways to inspire students in engineering and technology fields. Forward chaining: a process in which events or received data are considered by an entity to intelligently adapt its behavior. == G == Gynoid: A humanoid robot designed to look like a human female. == H == Haptic: tactile feedback technology using the operator's sense of touch. Also sometimes applied to robot manipulators with their own touch sensitivity. Hexapod (platform): A movable platform using six linear actuators. Often used in flight simulators and fairground rides, they also have applications as a robotic manipulator. Hexapod (walker): A six-legged walking robot, using a simple insect-like locomotion. Human–computer interaction. Humanoid: A robotic entity designed to resemble a human being in form, function, or both. Hydraulics: the control of mechanical force and movement, generated by the application of liquid under pressure. cf. pneumatics. == I == Industrial robot: A reprogrammable, multifunctional manipulator designed to move material, parts, tools, or specialized devices through variable programmed motions for the performance of a variety of tasks. Insect robot: A small robot designed to imitate insect behaviors rather than complex human behaviors. == K == Kalman filter: a mathematical technique to estimate the value of a sensor measurement, from a series of intermittent and noisy values. Kinematics: the study of motion, as applied to robots. This includes both the design of linkages to perform motion, their power, control and stability; also their planning, such as choosing a sequence of movements to achieve a broader task. Inverse Kinematics: the process of determining joint angles required for a robot's end-effector to reach a desired position and orientation in space. Used in motion planning to calculate motor commands from target positions. == L == Linear actuator A form of motor that generates a linear movement directly. == M == Manipulator or gripper: A robotic 'hand'. Mobile robot: A self-propelled and self-contained robot that is capable of moving over a mechanically unconstrained course. Muting: The deactivation of a presence-sensing safeguarding device during a portion of the robot cycle. Mecanum wheel: A wheel fitted with angled rollers that enables a robot vehicle to move in multiple directions, including sideways. == O == Ornithopter – An aerial robot or drone that achieves flight through a flapping-wing mechanism rather than rotating blades or fixed wings, often utilized for highly maneuverable flight. == P == Parallel manipulator: an articulated robot or manipulator based on a number of kinematic chains, actuators and joints, in parallel. cf. serial manipulator. Pendant: Any portable control device that permits an operator to control the robot from within the restricted envelope (space) of the robot. Pneumatics: the control of mechanical force and movement, generated by the application of compressed gas. cf. hydraulics. Powered exoskeleton: is a wearable mobile machine that allow for limb movement with increased strength and endurance. Prosthetic robots: programmable manipulators or devices for missing human limbs. == R == Remote manipulator: A manipulator under direct human control, often used for work with hazardous materials. Robonaut: a development project conducted by NASA to create humanoid robots capable of using space tools and working in similar environments to suited astronauts. == S == Sensor fusion:The process of combining data from multiple sensors, such as LiDAR, cameras, global positioning systems (GPS), and inertial measurement units (IMUs), to produce a more accurate and reliable understanding of an environment than using a single sensor alone. It is widely used in robotics and autonomous systems to improve perception, localization, and decision-making. Serial manipulator: an articulated robot or manipulator with a single series kinematic chain of actuators. cf. parallel manipulator. Service robots are machines that extend human capabilities. Servo, a motor that moves to and maintains a set position under command, rather than continuously moving. Servomechanism An automatic device that uses error-sensing negative feedback to correct the performance of a mechanism. Single Point of Control The ability to operate the robot such that initiation or robot motion from one source of control is possible only from that source and cannot be overridden from another source. Slow Speed Control A mode of robot motion control where the velocity of the robot is limited to allow persons sufficient time either to withdraw the hazardous motion or stop the robot. Snake robot A robot component resembling a tentacle or elephant's trunk, where many small actuators are used to allow continuous curved motion of a robot component, with many degrees of freedom. This is usually applied to snake-arm robots, which use this as a flexible manipulator. A rarer application is the snakebot, where the entire robot is mobile and snake-like, so as to gain access through narrow spaces. Stepper motor Stewart platform A movable platform using six linear actuators, hence also known as a Hexapod. Subsumption architecture A robot architecture that uses a modular, bottom-up design beginning with the least complex behavioral tasks. Surgical robot, a remote manipulator used for keyhole surgery Swarm robotics involve large numbers of mostly simple physical robots. Their actions may seek to incorporate emergent behavior observed in social insects (swarm intelligence). Synchro == T == Teach Mode: The control state that al
Read more →
Flok (company)

Flok (formerly Loyalblocks) was an American tech startup based in New York City that provides marketing services such as chatbots/AI, customer loyalty programs, mobile apps and CRM services to local businesses. In January 2017, the company was acquired by Wix.com. Around March 2017, Flok ceased regular communication. At some point in 2019 Flok communicated to its customers that it would shut down in March 2020. == Background == Flok was founded in 2011 by Ido Gaver and Eran Kirshenboim and has offices in Tel Aviv, Israel. In May 2013, Flok secured a $9 million Series A Round from General Catalyst Partners with participation from Founder Collective and existing investor Gemini Israel Ventures. In total, Flok has raised over $18 million in venture capital in three rounds. In May 2014, Flok announced a self-service loyalty platform for SMBs to build their own programs with beacon integration. At that time, approximately 40,000 businesses were using the service. In 2016, Flok released a turnkey chatbot service for local businesses, and was featured in AdWeek for developing the first weed bot chatbot for a California cannabis business. == Services == Flok offered an eponymous customer-facing app, that consumers use to receive rewards and deals from partner businesses, and a Flok business app for merchants to manage the platform.
Read more →
LumenVox

LumenVox is a privately held speech recognition software company based in San Diego, California. LumenVox has been described as one of the market leaders in the speech recognition software industry. == History == LumenVox was founded in 2001 as subsidiary of Progressive Computing. According to LumenVox CEO Edward Miller, when Progressive had initially looked to add speech recognition to its own phone system, it found the existing offerings too expensive and recognized a niche in the market for a more affordable speech recognition product. This led to the development of LumenVox with an aim to bring speech recognition to small-to-midsized businesses. LumenVox is one of the major providers of automatic speech recognition for telephone systems, and as of 2006, became the second largest provider of speech recognition software. == Products == The primary LumenVox product is the LumenVox Speech Engine. It is a speaker-independent automatic speech recognizer that uses the Speech Recognition Grammar Specification for building and defining grammars. It has been integrated with several of the major voice platforms, including Avaya Voice Portal/Interactive Response, Aculab, and BroadSoft's BroadWorks. The Speech Engine was originally derived from CMU Sphinx, but LumenVox has added considerable development effort to make it a commercial-ready product. LumenVox also offers a product called the Speech Tuner, which provides a graphical means of testing and troubleshooting speech recognition applications. == Open source support == LumenVox was recognized as one of the top VoIP companies in 2008 for its work in providing its offerings to the open source community, an effort by the company that began in 2006 when it partnered with Digium. At that time, Digium, maintainer of the open source Asterisk PBX, integrated the LumenVox Speech Engine into Asterisk. This made LumenVox the first commercially available speech recognition engine for Asterisk. As one of the earlier commercial software integrations with Asterisk, the LumenVox integration has been described as one of the applications that helped to mainstream Asterisk. In 2009, LumenVox also began offering access to the Speech Engine as a monthly subscription, bringing the cost of entry down even lower for open source users. LumenVox is also integrated with the open source UniMRCP project, which provides open source client and server libraries for the Media Resource Control Protocol.
Read more →
Pattern playback

The pattern playback is an early talking device that was built by Dr. Franklin S. Cooper and his colleagues, including John M. Borst and Caryl Haskins, at Haskins Laboratories in the late 1940s and completed in 1950. There were several different versions of this hardware device. Only one currently survives. The machine converts pictures of the acoustic patterns of speech in the form of a spectrogram back into sound. Using this device, Alvin Liberman, Frank Cooper, and Pierre Delattre (later joined by Katherine Safford Harris, Leigh Lisker, and others) were able to discover acoustic cues for the perception of phonetic segments (consonants and vowels). This research was fundamental to the development of modern techniques of speech synthesis, reading machines for the blind, the study of speech perception and speech recognition, and the development of the motor theory of speech perception. To create sound, the pattern playback machine uses an arc light source which is directed against a rotating disk with 50 concentric tracks whose transparencies vary systematically in order to produce 50 harmonics of a fundamental frequency. The light is further projected against a spectrogram, whose reflectance corresponds to the sound pressure level of the partial of the signal, and is then directed towards a photovoltaic cell by which the light variation is converted into sound pressure variations. The pattern playback was last used in an experimental study by Robert Remez in 1976. The pattern playback now resides in the Museum at Haskins Laboratories in New Haven, Connecticut. The technique of pattern playback also now refers, more generally, to algorithms or techniques for converting spectrograms, cochleagrams, and correlograms from pictures back into sounds. A demonstration is in the TV show Adventure. Pioneering technology in psycholinguistics (CBS Television. 1953). == Digital pattern playback == In the 1970s, digital pattern playbacks began to supplant the earlier version. An early prototype was developed by Patrick Nye, Philip Rubin, and colleagues at Haskins Laboratories. It combined a "Ubiquitous Spectrum Analyzer"[1] for automatic spectral analysis, along with a VAX GT-40 display processor for graphic manipulation of the displayed spectrogram, a form of "synthesis by art", and subsequent re-synthesis using a 40 channel filter bank. This hybrid hardware/software digital pattern playback was eventually replaced at Haskins Laboratories by the HADES analysis and display system, designed by Philip Rubin, and implemented in Fortran on the VAX family of computers. A more modern version has been described by Arai and colleagues [2]. An on-line demonstration is available [3].
Read more →
Computer appliance

A computer appliance is a computer system with a combination of hardware, software, or firmware that is specifically designed to provide a particular computing resource. Such devices became known as appliances because of the similarity in role or management to a home appliance, which are generally closed and sealed, and are not serviceable by the user or owner. The hardware and software are delivered as an integrated product and may even be pre-configured before delivery to a customer, to provide a turn-key solution for a particular application. Unlike general purpose computers, appliances are generally not designed to allow the customers to change the software and the underlying operating system, or to flexibly reconfigure the hardware. Another form of appliance is the virtual appliance, which has similar functionality to a dedicated hardware appliance, but is distributed as a software virtual machine image for a hypervisor-equipped device. == Overview == Traditionally, software applications run on top of a general-purpose operating system, which uses the hardware resources of the computer (primarily memory, disk storage, processing power, and networking bandwidth) to meet the computing needs of the user. The main issue with the traditional model is related to complexity. It is complex to integrate the operating system and applications with a hardware platform, and complex to support it afterwards. By tightly constraining the variations of the hardware and software, the appliance becomes easily deployable, and can be used without nearly as wide (or deep) IT knowledge. Additionally, when problems and errors appear, the supporting staff very rarely needs to explore them deeply to understand the matter thoroughly. The staff needs merely training on the appliance management software to be able to resolve most of problems. In all forms of the computer appliance model, customers benefit from easy operations. The appliance has exactly one combination of hardware and operating system and application software, which has been pre-installed at the factory. This prevents customers from needing to perform complex integration work, and dramatically simplifies troubleshooting. In fact, this "turnkey operation" characteristic is the driving benefit that customers seek when purchasing appliances. To be considered an appliance, the (hardware) device needs to be integrated with software, and both are supplied as a package. This distinguishes appliances from "home grown" solutions, or solutions requiring complex implementations by integrators or value-added resellers (VARs). The appliance approach helps to decouple the various systems and applications, for example in the data center. Once a resource is decoupled, in theory it can be also centralized to become shared among many systems, centrally managed and optimized, all without requiring changes to any other system. == Tradeoffs of the computer appliance approach == The major disadvantage of deploying a computer appliance is that since they are designed to supply a specific resource, they most often include a customized operating system running over specialized hardware, neither of which are likely to be compatible with the other systems previously deployed. Customers lose flexibility. One may believe that a proprietary embedded operating system, or operating system within an application, can make the appliance much more secure from common cyber attacks. However, the opposite is true. Security by obscurity is a poor security decision, and appliances are often plagued by security issues as evidenced by the proliferation of IoT devices. == Types of appliances == The variety of computer appliances reflects the wide range of computing resources they provide to applications. Some examples: Storage appliances provide large amounts of storage, often available to many machines on the network. See Network-attached storage and Storage area network. Network appliances are general purpose routers which may also provide firewall protection, Transport Layer Security (TLS), messaging, access to specialized networking protocols (like the ebXML Message Service) and bandwidth multiplexing for the multiple systems they front-end. Backup and disaster recovery appliances computer appliances that are integrated backup software and backup targets, sometimes with hypervisors to support local DR of protected servers. They are often a gateway to a full DRaaS solution. Firewall and Security appliances Dedicated network appliances that are designed to protect computer networks from unwanted traffic. IIoT and MES Gateway appliances Computer appliances that are designed to translate data bidirectionally between control systems and enterprise systems. Proprietary, embedded, firmware applications running on the appliance use point-to-point connections to translate data between field devices in their native automation protocols and MES systems through their APIs, ODBC, or RESTful interfaces. Anti-spam appliances for e-mail spam Software appliances A single application server appliance, with just enough operating system (JeOS) for it to run. Virtual machine appliances consist of a "hypervisor style" embedded operating system running on appliance hardware. The hypervisor layer is matched to the hardware of the appliance, and cannot be varied by the customer, but the customer may load other operating systems and applications onto the appliance in the form of virtual machines. == Consumer appliances == Aside from its deployment within data centers, many computer appliances are directly used by the general public. These include: Digital video recorder Residential gateway Network-attached storage (NAS) Video game console Consumer uses stress the need for an appliance to have easy installation, configuration, and operation, with little or no technical knowledge being necessary. == Appliances in industrial automation == The world of industrial automation has been rich in appliances. These appliances have been hardened to withstand temperature and vibration extremes. These appliances are also highly configurable, enabling customization to meet a wide variety of applications. The key benefits of an appliance in automation are: Reduced downtime - a failed appliance is typically replaced with a COTS replacement and its task is quickly and easily reloaded from a backup. Highly scalable - appliances are typically targeted solutions for an area of a plant or process. As the requirements change, scalability is achieved through the installation of another appliance. Automation concepts are easily replicated throughout the enterprise by standardizing on appliances to perform the needed tasks, as opposed to the development of custom automation schemes for each task. Low TCO (total cost of ownership) - appliances are developed, tested and supported by automation product vendors and undergo a much broader level of quality testing than custom designed automation solutions. The use of appliances in automation reduce the level of testing needed in each individual application. Reduced design time - appliances perform specific functions and although they are highly configurable, they are typically self documenting. This enables appliance based solutions to be transferred from engineer to engineer with minimal need for training and documentation. Types of automation appliances: PLC (programmable logic controller) - Programmable logic controllers are appliances that are typically used for discrete control and offer a wide range of Input and Output options. They are configured through standardized programming languages such as IEC-1131. PID (proportional–integral–derivative controller) - PID controllers are appliances that monitor a process variable and, based on an error term, effect change on a control output (manipulated variable) to drive the process variable to a setpoint. PAC (programmable automation controller) - Programmable automation controllers are appliances that embody properties of both PLCs and PID controllers enabling the integration of both analog and discrete control. Universal gateway - A universal gateway appliance has the ability to communicate with a variety of devices through their respective communication protocols, and will affect data transactions between them. This in increasingly important as manufacturing strives to improve agility, quality, production rates, production costs and reduce downtime through enhanced M2M (machine to machine) communications. EATMs (Enterprise Appliance Transaction Modules) - Enterprise appliance transaction modules are appliances that affect data transactions from plant floor automation systems to enterprise business systems. They communicate to plant floor equipment through various vendor automation protocols, and communicate to business systems through database communication protocols such as JMS (Java Message Service) and SQL (Structured Query Language). == Internal structure == There are several
Read more →
Perceptual robotics

Perceptual robotics is an interdisciplinary science linking Robotics and Neuroscience. It investigates biologically motivated robot control strategies, concentrating on perceptual rather than cognitive processes and thereby sides with J. J. Gibson's view against the Poverty of the stimulus theory. As a working definition, the following quote from Chapter 64 by H. Bülthoff, C. Wallraven and M. Giese from The Springer Handbook of Robotics, edited by Bruno Siciliano and Oussama Khatib, published by Springer in 2007, could be used: In the following we will apply the term Perceptual Robotics to signify the design of robots based on principles that are derived from human perception on all three levels in the sense of Marr. This includes a realization in terms of specific neural circuits as well as the transfer of more abstract biologically-inspired strategies for the solution of relevant computational problems.
Read more →
Beauty.AI

Beauty.AI is a mobile beauty pageant for humans and a contest for programmers developing algorithms for evaluating human appearance. The mobile app and website created by Youth Laboratories that uses artificial intelligence technology to evaluate people's external appearance through certain algorithms, such as symmetry, facial blemishes, wrinkles, estimated age and age appearance, and comparisons to actors and models. The Beauty.AI 2.0 contest caused great concern over important ethical issues with deep neural networks such as age, race and gender bias and lead to the creation of the Diversity.AI think tank dedicated to developing new methods for uncovering and managing bias in artificially intelligent systems. Beauty.AI was also an attempt to find approaches on how machines can perceive human face through evaluating particular features, commonly associated with health and beauty. == Concept == The Beauty.AI app was created by Youth Laboratories, a company based out of Russia and Hong Kong that focuses on facial skin analytics. The bioinformation company Insilico Medicine assists in the Beauty.AI app by testing its deep learning techniques to the app. One goal of the app is to reduce the need for human and animal testing as well as improving people's overall health. Its first contest was started in December 2016, and the results were announced in August 2016. More than 60,000 people submitted entries into the contest. The mobile app uses artificial intelligence technology to inspect photographs for certain facial features in order to both determine a person's beauty through artificial means by multiple robots. Part of the Beauty.AI app's purpose is to collect visual and anecdotal data to improve its creator's Youth Laboratories skin analyst skills. == Accusations of racism == There were a total of 44 individuals from different age groups and genders judged as the most attractive, with 37 white entrants, six Asian entrants, and one dark-skinned entrant. The app has received criticism from social justice advocates and computer science professionals. However, Alex Zhavoronkov, PhD, chief science officer of Youth Laboratories and chief technology officer Konstantin Kiselev, both for Youth Laboratories, noted that a lack of data may have contributed to these results. Also, Kiselev added that another issue was that approximately 75% of entrants were white Europeans, whereas only 7% and 1% were from India and Africa, respectively. Kiselev stated that they would work on doing more and better outreach to these areas to improve in this area. Despite this, it was said by Dr. Zhavoronkov that the AI would discard photos of dark-skinned people if the lighting is too poor. Dr. Zhavoronkov vowed to weed out the issues for the next beauty pageant and to try to avoid a similar controversy in the future.
Read more →
Dyme (company)

Dyme is a Dutch fintech start-up and subscription management app that allows users to cancel and renegotiate their recurring costs. In 2019, Dyme was the first independent Dutch company to receive a PSD2 licence from the Netherlands' central bank (DNB). == History == Dyme was founded in 2018 by Joran Iedema, David Knap, David Schogt and Wouter Florijn. The four had previously founded Cycleswap, a bicycle rental platform launched in 2015 and sold to the American platform Spinlister in 2016. The company gained notability in the Netherlands in 2020 when it appeared on Dutch television in Dragons Den, where Pieter Schoen made a €750,000 bid in an attempt to acquire 51.01% of the company. Dyme's Joran Iedema rejected the deal. == Recognition == Wired described Dyme as one of the "hottest start-ups in Europe" in 2021. As of 2021, the company reportedly had 350,000 registered users in the Netherlands and Great Britain.
Read more →