AI Writing Helper

AI Writing Helper — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Image formation

The study of image formation encompasses the radiometric and geometric processes by which 2D images of 3D objects are formed. In the case of digital images, the image formation process also includes analog to digital conversion and sampling. == Imaging == The imaging process is a mapping of an object to an image plane. Each point on the image corresponds to a point on the object. An illuminated object will scatter light toward a lens and the lens will collect and focus the light to create the image. The ratio of the height of the image to the height of the object is the magnification. The spatial extent of the image surface and the focal length of the lens determines the field of view of the lens. Image formation of mirror these have a center of curvature and its focal length of the mirror is half of the center of curvature. == Illumination == An object may be illuminated by the light from an emitting source such as the sun, a light bulb or a Light Emitting Diode. The light incident on the object is reflected in a manner dependent on the surface properties of the object. For rough surfaces, the reflected light is scattered in a manner described by the Bi-directional Reflectance Distribution Function (BRDF) of the surface. The BRDF of a surface is the ratio of the exiting power per square meter per steradian (radiance) to the incident power per square meter (irradiance). The BRDF typically varies with angle and may vary with wavelength, but a specific important case is a surface that has constant BRDF. This surface type is referred to as Lambertian and the magnitude of the BRDF is R/π, where R is the reflectivity of the surface. The portion of scattered light that propagates toward the lens is collected by the entrance pupil of the imaging lens over the field of view. == Field of view and imagery == The Field of view of a lens is limited by the size of the image plane and the focal length of the lens. The relationship between a location on the image and a location on the object is y = ftan(θ), where y is the max extent of the image plane, f is the focal length of the lens and θ is the field of view. If y is the max radial size of the image then θ is the field of view of the lens. While the image created by a lens is continuous, it can be modeled as a set of discrete field points, each representing a point on the object. The quality of the image is limited by the aberrations in the lens and the diffraction created by the finite aperture stop. == Pupils and stops == The aperture stop of a lens is a mechanical aperture which limits the light collection for each field point. The entrance pupil is the image of the aperture stop created by the optical elements on the object side of the lens. The light scattered by an object is collected by the entrance pupil and focused onto the image plane via a series of refractive elements. The cone of the focused light at the image plane is set by the size of the entrance pupil and the focal length of the lens. This is often referred to as the f-stop or f-number of the lens. f/# = f/D where D is the diameter of the entrance pupil. == Pixelation and color vs. monochrome == In typical digital imaging systems, a sensor is placed at the image plane. The light is focused on to the sensor and the continuous image is pixelated. The light incident on each pixel in the sensor will be integrated within the pixel and a proportional electronic signal will be generated. The angular geometric resolution of a pixel is given by atan(p/f), where p is the pitch of the pixel. This is also called the pixel field of view. The sensor may be monochrome or color. In the case of a monochrome sensor, the light incident on each pixel is integrated and the resulting image is a grayscale like picture. For color images, a mosaic color filter is typically placed over the pixels to create a color image. An example is a Bayer filter. The signal incident on each pixel is then digitized to a bit stream. == Image quality == The quality of an image is dependent upon both geometric and physical items. Geometrically, higher density of pixels across an image will give less blocky pixelation and thus a better geometric image quality. Lens aberrations also contribute to the quality of the image. Physically, diffraction due to the aperture stop will limit the resolvable spatial frequencies as a function of f-number. In the frequency domain, Modulation Transfer Function (MTF) is a measure of the quality of the imaging system. The MTF is a measure of the visibility of a sinusoidal variation in irradiance on the image plane as a function of the frequency of the sinusoid. It includes the effects of diffraction, aberrations and pixelation. For the lens, the MTF is the autocorrelation of the pupil function, so it accounts for the finite pupil extent and the lens aberrations. The sensor MTF is the Fourier Transform of the pixel geometry. For a square pixel, MTF(ξ) = sin(πξp)/πξp where p is the pixel width and ξ is the spatial frequency. The MTF of the combination of the lens and detector is the product of the two component MTFs. == Perception == Color images can be perceived via two means. In the case of computer vision the light incident on the sensor comprises the image. In the case of visual perception, the human eye has a color dependent response to light so this must be accounted for. This is important consideration when converting to grayscale. == Image formation in eye == The principal difference between the lens of the eye and an ordinary optical lens is that the former is flexible. The radius of the curvature of the anterior surface of the lens is greater than the radius of its posterior surface. The shape of the lens is controlled by tension in the fibers of the ciliary body. To focus on distant objects, the controlling muscles cause the lens to be relatively flattened. Similarly, these muscles allow the lens to become thicker in order to focus on objects near the eye. The distance between the center of the lens and the retina (focal length) varies from approximately 17 mm to about 14 mm, as the refractive power of the lens increases from its minimum to its maximum. When the eye focuses on an object farther away than about 3 m, the lens exhibits its lowest refractive power. When the eye focuses on a close object, the lens is most strongly refractive.
Read more →
Language technology

Language technology, often called human language technology (HLT), studies methods of how computer programs or electronic devices can analyze, produce, modify or respond to human texts and speech. Working with language technology often requires broad knowledge not only about linguistics but also about computer science. It consists of natural language processing (NLP) and computational linguistics (CL) on the one hand, many application oriented aspects of these, and more low-level aspects such as encoding and speech technology on the other hand. Note that these elementary aspects are normally not considered to be within the scope of related terms such as natural language processing and (applied) computational linguistics, which are otherwise near-synonyms. As an example, for many of the world's lesser known languages, the foundation of language technology is providing communities with fonts and keyboard setups so their languages can be written on computers or mobile devices. Other tools also are part of modern language technology and include machine translation, speech recognition, text processing and natural language processing. Large scale AI models have recently advanced the field and enhanced the ability of machines to interpret complex human context.
Read more →
Uniform convergence in probability

Uniform convergence in probability is a form of convergence in probability in statistical asymptotic theory and probability theory. It means that, under certain conditions, the empirical frequencies of all events in a certain event-family uniformly converge to their theoretical probabilities. Uniform convergence in probability has applications to statistics as well as machine learning as part of statistical learning theory. Specifically, the Glivenko-Cantelli theorem and the homonymous classes of functions are fundamentally related to uniform convergence. The law of large numbers says that, for each single event A {\displaystyle A} , its empirical frequency in a sequence of independent trials converges (with high probability) to its theoretical probability. In many application however, the need arises to judge simultaneously the probabilities of events of an entire class S {\displaystyle S} from one and the same sample. Moreover, it, is required that the relative frequency of the events converge to the probability uniformly over the entire class of events S {\displaystyle S} . The Uniform Convergence Theorem gives a sufficient condition for this convergence to hold. Roughly, if the event-family is sufficiently simple (its VC dimension is sufficiently small) then uniform convergence holds. == Definitions == For a class of predicates H {\displaystyle H} defined on a set X {\displaystyle X} and a set of samples x = ( x 1 , x 2 , … , x m ) {\displaystyle x=(x_{1},x_{2},\dots ,x_{m})} , where x i ∈ X {\displaystyle x_{i}\in X} , the empirical frequency of h ∈ H {\displaystyle h\in H} on x {\displaystyle x} is Q ^ x ( h ) = 1 m | { i : 1 ≤ i ≤ m , h ( x i ) = 1 } | . {\displaystyle {\widehat {Q}}_{x}(h)={\frac {1}{m}}|\{i:1\leq i\leq m,h(x_{i})=1\}|.} The theoretical probability of h ∈ H {\displaystyle h\in H} is defined as Q P ( h ) = P { y ∈ X : h ( y ) = 1 } . {\displaystyle Q_{P}(h)=P\{y\in X:h(y)=1\}.} The Uniform Convergence Theorem states, roughly, that if H {\displaystyle H} is "simple" and we draw samples independently (with replacement) from X {\displaystyle X} according to any distribution P {\displaystyle P} , then with high probability, the empirical frequency will be close to its expected value, which is the theoretical probability. Here "simple" means that the Vapnik–Chervonenkis dimension of the class H {\displaystyle H} is small relative to the size of the sample. In other words, a sufficiently simple collection of functions behaves roughly the same on a small random sample as it does on the distribution as a whole. The Uniform Convergence Theorem was first proved by Vapnik and Chervonenkis using the concept of growth function. == Uniform Convergence Theorem == The statement of the Uniform Convergence Theorem is as follows: If H {\displaystyle H} is a set of { 0 , 1 } {\displaystyle \{0,1\}} -valued functions defined on a set X {\displaystyle X} and P {\displaystyle P} is a probability distribution on X {\displaystyle X} then for ε > 0 {\displaystyle \varepsilon >0} and m {\displaystyle m} a positive integer, we have: P m { | Q P ( h ) − Q x ^ ( h ) | ≥ ε for some h ∈ H } ≤ 4 Π H ( 2 m ) e − ε 2 m / 8 . {\displaystyle P^{m}\{|Q_{P}(h)-{\widehat {Q_{x}}}(h)|\geq \varepsilon {\text{ for some }}h\in H\}\leq 4\Pi _{H}(2m)e^{-\varepsilon ^{2}m/8}.} In the above, for any x ∈ X m , {\displaystyle x\in X^{m},} Q P ( h ) = P { ( y ∈ X : h ( y ) = 1 } , {\displaystyle Q_{P}(h)=P\{(y\in X:h(y)=1\},} Q ^ x ( h ) = 1 m | { i : 1 ≤ i ≤ m , h ( x i ) = 1 } | {\displaystyle {\widehat {Q}}_{x}(h)={\frac {1}{m}}|\{i:1\leq i\leq m,h(x_{i})=1\}|} and | x | = m . {\displaystyle |x|=m.} P m {\displaystyle P^{m}} indicates that the probability is taken over x {\displaystyle x} consisting of m {\displaystyle m} i.i.d. draws from the distribution P . {\displaystyle P.} Finally, the growth function Π H {\displaystyle \Pi _{H}} is defined in the following way, for any { 0 , 1 } {\displaystyle \{0,1\}} -valued functions H {\displaystyle H} over X {\displaystyle X} and for any natural number m {\displaystyle m} : Π H ( m ) = max | { h ∩ D : D ⊆ X , | D | = m , h ∈ H } | . {\displaystyle \Pi _{H}(m)=\max |\{h\cap D:D\subseteq X,|D|=m,h\in H\}|.} From the point of view of Learning Theory one can consider H {\displaystyle H} to be the Concept/Hypothesis class defined over the instance set X {\displaystyle X} . Crucially, the Sauer–Shelah lemma implies that Π H ( m ) ≤ m d {\displaystyle \Pi _{H}(m)\leq m^{d}} , where d {\displaystyle d} is the VC dimension of H {\displaystyle H} . == Proof of the Uniform Convergence Theorem == and are the sources of the proof below. Before we get into the details of the proof of the Uniform Convergence Theorem we will present a high level overview of the proof. Symmetrization: We transform the problem of analyzing | Q P ( h ) − Q ^ x ( h ) | ≥ ε {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{x}(h)|\geq \varepsilon } into the problem of analyzing | Q ^ r ( h ) − Q ^ s ( h ) | ≥ ε / 2 {\displaystyle |{\widehat {Q}}_{r}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2} , where r {\displaystyle r} and s {\displaystyle s} are i.i.d samples of size m {\displaystyle m} drawn according to the distribution P {\displaystyle P} . One can view r {\displaystyle r} as the original randomly drawn sample of length m {\displaystyle m} , while s {\displaystyle s} may be thought as the testing sample which is used to estimate Q P ( h ) {\displaystyle Q_{P}(h)} . Permutation: Since r {\displaystyle r} and s {\displaystyle s} are picked identically and independently, so swapping elements between them will not change the probability distribution on r {\displaystyle r} and s {\displaystyle s} . So, we will try to bound the probability of | Q ^ r ( h ) − Q ^ s ( h ) | ≥ ε / 2 {\displaystyle |{\widehat {Q}}_{r}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2} for some h ∈ H {\displaystyle h\in H} by considering the effect of a specific collection of permutations of the joint sample x = r | | s {\displaystyle x=r||s} . Specifically, we consider permutations σ ( x ) {\displaystyle \sigma (x)} which swap x i {\displaystyle x_{i}} and x m + i {\displaystyle x_{m+i}} in some subset of 1 , 2 , . . . , m {\displaystyle {1,2,...,m}} . The symbol r | | s {\displaystyle r||s} means the concatenation of r {\displaystyle r} and s {\displaystyle s} . Reduction to a finite class: We can now restrict the function class H {\displaystyle H} to a fixed joint sample and hence, if H {\displaystyle H} has finite VC Dimension, it reduces to the problem to one involving a finite function class. We present the technical details of the proof. It should be stressed that this proof glosses over details like the measurability of the events V {\displaystyle V} and R {\displaystyle R} ; measurability is granted in the case of H {\displaystyle H} being finite or countable, but this is not normally the case in standard applications of the theorem (e.g. for statistical learning theory or to prove the Glivenko-Cantelli theorem). To get measurability, one needs to use a notion of separability of the underlying space, possibly related to H {\displaystyle H} . === Symmetrization === Lemma: Let V = { x ∈ X m : | Q P ( h ) − Q ^ x ( h ) | ≥ ε for some h ∈ H } {\displaystyle V=\{x\in X^{m}:|Q_{P}(h)-{\widehat {Q}}_{x}(h)|\geq \varepsilon {\text{ for some }}h\in H\}} and R = { ( r , s ) ∈ X m × X m : | Q r ^ ( h ) − Q ^ s ( h ) | ≥ ε / 2 for some h ∈ H } . {\displaystyle R=\{(r,s)\in X^{m}\times X^{m}:|{\widehat {Q_{r}}}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2{\text{ for some }}h\in H\}.} Then for m ≥ 2 ε 2 {\displaystyle m\geq {\frac {2}{\varepsilon ^{2}}}} , P m ( V ) ≤ 2 P 2 m ( R ) {\displaystyle P^{m}(V)\leq 2P^{2m}(R)} . Proof: By the triangle inequality, if | Q P ( h ) − Q ^ r ( h ) | ≥ ε {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon } and | Q P ( h ) − Q ^ s ( h ) | ≤ ε / 2 {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{s}(h)|\leq \varepsilon /2} then | Q ^ r ( h ) − Q ^ s ( h ) | ≥ ε / 2 {\displaystyle |{\widehat {Q}}_{r}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2} . Therefore, P 2 m ( R ) ≥ P 2 m { ∃ h ∈ H , | Q P ( h ) − Q ^ r ( h ) | ≥ ε and | Q P ( h ) − Q ^ s ( h ) | ≤ ε / 2 } = ∫ V P m { s : ∃ h ∈ H , | Q P ( h ) − Q ^ r ( h ) | ≥ ε and | Q P ( h ) − Q ^ s ( h ) | ≤ ε / 2 } d P m ( r ) = A {\displaystyle {\begin{aligned}&P^{2m}(R)\\[5pt]\geq {}&P^{2m}\{\exists h\in H,|Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon {\text{ and }}|Q_{P}(h)-{\widehat {Q}}_{s}(h)|\leq \varepsilon /2\}\\[5pt]={}&\int _{V}P^{m}\{s:\exists h\in H,|Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon {\text{ and }}|Q_{P}(h)-{\widehat {Q}}_{s}(h)|\leq \varepsilon /2\}\,dP^{m}(r)\\[5pt]={}&A\end{aligned}}} since r {\displaystyle r} and s {\displaystyle s} are independent. Now for r ∈ V {\displaystyle r\in V} fix an h ∈ H {\displaystyle h\in H} such that | Q P ( h ) − Q ^ r ( h ) | ≥ ε {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon } . For this h {\displaystyle h} , we shall
Read more →
Conversational user interface

A conversational user interface (CUI) is a user interface for computers that emulates a conversation with a human. Historically, computers have relied on text-based user interfaces and graphical user interfaces (GUIs) (such as the user pressing a "back" button) to translate the user's desired action into commands the computer understands. While an effective mechanism of completing computing actions, there is a learning curve for the user associated with GUI. Instead, CUIs provide opportunity for the user to communicate with the computer in their natural language rather than in a syntax specific commands.
Read more →
Distribution management system

A distribution management system (DMS) is a collection of applications designed to monitor and control the electric power distribution networks efficiently and reliably. It acts as a decision support system to assist the control room and field operating personnel with the monitoring and control of the electric distribution system. Improving the reliability and quality of service in terms of reducing power outages, minimizing outage time, maintaining acceptable frequency and voltage levels are the key deliverables of a DMS. Given the complexity of distribution grids, such systems may involve communication and coordination across multiple components. For example, the control of active loads may require a complex chain of communication through different components as described in US patent 11747849B2 In recent years, utilization of electrical energy increased exponentially and customer requirement and quality definitions of power were changed enormously. As electric energy became an essential part of daily life, its optimal usage and reliability became important. Real-time network view and dynamic decisions have become instrumental for optimizing resources and managing demands, leading to the need for distribution management systems in large-scale electrical networks. == Overview == Most distribution utilities have been comprehensively using IT solutions through their Outage Management System (OMS) that makes use of other systems like Customer Information System (CIS), Geographical Information System (GIS) and Interactive Voice Response System (IVRS). An outage management system has a network component/connectivity model of the distribution system. By combining the locations of outage calls from customers with knowledge of the locations of the protection devices (such as circuit breakers) on the network, a rule engine is used to predict the locations of outages. Based on this, restoration activities are charted out and the crew is dispatched for the same. In parallel with this, distribution utilities began to roll out Supervisory Control and Data Acquisition (SCADA) systems, initially only at their higher voltage substations. Over time, use of SCADA has progressively extended downwards to sites at lower voltage levels. DMSs access real-time data and provide all information on a single console at the control centre in an integrated manner. Their development varied across different geographic territories. In the US, for example, DMSs typically grew by taking Outage Management Systems to the next level, automating the complete sequences and providing an end to end, integrated view of the entire distribution spectrum. In the UK, by contrast, the much denser and more meshed network topologies, combined with stronger Health & Safety regulation, had led to early centralisation of high-voltage switching operations, initially using paper records and schematic diagrams printed onto large wallboards which were 'dressed' with magnetic symbols to show the current running states. There, DMSs grew initially from SCADA systems as these were expanded to allow these centralised control and safety management procedures to be managed electronically. These DMSs required even more detailed component/connectivity models and schematics than those needed by early OMSs as every possible isolation and earthing point on the networks had to be included. In territories such as the UK, therefore, the network component/connectivity models were usually developed in the DMS first, whereas in the USA these were generally built in the GIS. The typical data flow in a DMS has the SCADA system, the Information Storage & Retrieval (ISR) system, Communication (COM) Servers, Front-End Processors (FEPs) & Field Remote Terminal Units (FRTUs). == Why DMS? == Reduce the duration of outages Improve the speed and accuracy of outage predictions. Reduce crew patrol and drive times through improved outage locating. Improve the operational efficiency Determine the crew resources necessary to achieve restoration objectives. Effectively utilize resources between operating regions. Determine when best to schedule mutual aid crews. Increased customer satisfaction A DMS incorporates IVR and other mobile technologies, through which there is an improved outage communications for customer calls. Provide customers with more accurate estimated restoration times. Improve service reliability by tracking all customers affected by an outage, determining electrical configurations of every device on every feeder, and compiling details about each restoration process. == DMS Functions == In order to support proper decision making and O&M activities, DMS solutions should support the following functions: Network visualization & support tools Applications for Analytical & Remedial Action Utility Planning Tools System Protection Schemes The various sub functions of the same, carried out by the DMS are listed below:- === Network Connectivity Analysis (NCA) === Distribution network usually covers over a large area and catering power to different customers at different voltage levels. So locating required sources and loads on a larger GIS/Operator interface is often very difficult. Panning & zooming provided with normal SCADA system GUI does not cover the exact operational requirement. Network connectivity analysis is an operator specific functionality which helps the operator to identify or locate the preferred network or component very easily. NCA does the required analyses and provides display of the feed point of various network loads. Based on the status of all the switching devices such as circuit breaker (CB), Ring Main Unit (RMU) and/or isolators that affect the topology of the network modeled, the prevailing network topology is determined. The NCA further assists the operator to know operating state of the distribution network indicating radial mode, loops and parallels in the network. === Switching Schedule & Safety Management === In territories such as the UK a core function of a DMS has always been to support safe switching and work on the networks. Control engineers prepare switching schedules to isolate and make safe a section of network before work is carried out, and the DMS validates these schedules using its network model. Switching schedules can combine telecontrolled and manual (on-site) switching operations. When the required section has been made safe, the DMS allows a Permit To Work (PTW) document to be issued. After its cancellation when the work has been finished, the switching schedule then facilitates restoration of the normal running arrangements. Switching components can also be tagged to reflect any Operational Restrictions that are in force. The network component/connectivity model, and associated diagrams, must always be kept absolutely up to date. The switching schedule facility therefore also allows 'patches' to the network model to be applied to the live version at the appropriate stage(s) of the jobs. The term 'patch' is derived from the method previously used to maintain the wallboard diagrams. === State Estimation (SE) === The state estimator is an integral part of the overall monitoring and control systems for transmission networks. It is mainly aimed at providing a reliable estimate of the system voltages. This information from the state estimator flows to control centers and database servers across the network. The variables of interest are indicative of parameters like margins to operating limits, health of equipment and required operator action. State estimators allow the calculation of these variables of interest with high confidence despite the facts that the measurements may be corrupted by noise, or could be missing or inaccurate. Even though we may not be able to directly observe the state, it can be inferred from a scan of measurements which are assumed to be synchronized. The algorithms need to allow for the fact that presence of noise might skew the measurements. In a typical power system, the State is quasi-static. The time constants are sufficiently fast so that system dynamics decay away quickly (with respect to measurement frequency). The system appears to be progressing through a sequence of static states that are driven by various parameters like changes in load profile. The inputs of the state estimator can be given to various applications like Load Flow Analysis, Contingency Analysis, and other applications. === Load Flow Applications (LFA) === Load flow study is an important tool involving numerical analysis applied to a power system. The load flow study usually uses simplified notations like a single-line diagram and focuses on various forms of AC power rather than voltage and current. It analyzes the power systems in normal steady-state operation. The goal of a power flow study is to obtain complete voltage angle and magnitude information for each bus in a power system for specified load and generator real power and voltage conditions. Once this
Read more →
PhyCV

PhyCV is the first computer vision library which utilizes algorithms directly derived from the equations of physics governing physical phenomena. The algorithms appearing in the first release emulate the propagation of light through a physical medium with natural and engineered diffractive properties followed by coherent detection. Unlike traditional algorithms that are a sequence of hand-crafted empirical rules, physics-inspired algorithms leverage physical laws of nature as blueprints. In addition, these algorithms can, in principle, be implemented in real physical devices for fast and efficient computation in the form of analog computing. Currently PhyCV has three algorithms, Phase-Stretch Transform (PST) and Phase-Stretch Adaptive Gradient-Field Extractor (PAGE), and Vision Enhancement via Virtual diffraction and coherent Detection (VEViD). All algorithms have CPU and GPU versions. PhyCV is now available on GitHub and can be installed from pip. == History == Algorithms in PhyCV are inspired by the physics of the photonic time stretch (a hardware technique for ultrafast and single-shot data acquisition). PST is an edge detection algorithm that was open-sourced in 2016 and has 800+ stars and 200+ forks on GitHub. PAGE is a directional edge detection algorithm that was open-sourced in February, 2022. PhyCV was originally developed and open-sourced by Jalali-Lab @ UCLA in May 2022. In the initial release of PhyCV, the original open-sourced code of PST and PAGE is significantly refactored and improved to be modular, more efficient, GPU-accelerated and object-oriented. VEViD is a low-light and color enhancement algorithm that was added to PhyCV in November 2022. == Background == === Phase-Stretch Transform (PST) === Phase-Stretch Transform (PST) is a computationally efficient edge and texture detection algorithm with exceptional performance in visually impaired images. The algorithm transforms the image by emulating propagation of light through a device with engineered diffractive property followed by coherent detection. It has been applied in improving the resolution of MRI image, extracting blood vessels in retina images, dolphin identification, and waste water treatment, single molecule biological imaging, and classification of UAV using micro Doppler imaging. === Phase-Stretch Adaptive Gradient-Field Extractor (PAGE) === Phase-Stretch Adaptive Gradient-Field Extractor (PAGE) is a physics-inspired algorithm for detecting edges and their orientations in digital images at various scales. The algorithm is based on the diffraction equations of optics. Metaphorically speaking, PAGE emulates the physics of birefringent (orientation-dependent) diffractive propagation through a physical device with a specific diffractive structure. The propagation converts a real-valued image into a complex function. Related information is contained in the real and imaginary components of the output. The output represents the phase of the complex function. === Vision Enhancement via Virtual diffraction and coherent Detection (VEViD) === Vision Enhancement via Virtual diffraction and coherent Detection (VEViD) an efficient and interpretable low-light and color enhancement algorithm that reimagines a digital image as a spatially varying metaphoric light field and then subjects the field to the physical processes akin to diffraction and coherent detection. The term “Virtual” captures the deviation from the physical world. The light field is pixelated and the propagation imparts a phase with an arbitrary dependence on frequency which can be different from the quadratic behavior of physical diffraction. VEViD can be further accelerated through mathematical approximations that reduce the computation time without appreciable sacrifice in image quality. A closed-form approximation for VEViD which we call VEViD-lite can achieve up to 200 FPS for 4K video enhancement. == PhyCV on the Edge == Featuring low-dimensionality and high-efficiency, PhyCV is ideal for edge computing applications. In this section, we demonstrate running PhyCV on NVIDIA Jetson Nano in real-time. === NVIDIA Jetson Nano Developer Kit === NVIDIA Jetson Nano Developer Kit is a small- sized and power-efficient platform for edge computing applications. It is equipped with an NVIDIA Maxwell architecture GPU with 128 CUDA cores, a quad-core ARM Cortex-A57 CPU, 4GB 64-bit LPDDR4 RAM, and supports video encoding and decoding up to 4K resolution. Jetson Nano also offers a variety of interfaces for connectivity and expansion, making it ideal for a wide range of AI and IoT applications. In our setup, we connect a USB camera to the Jetson Nano to acquire videos and demonstrate using PhyCV to process the videos in real-time. === Real-time PhyCV on Jetson Nano === We use the Jetson Nano (4GB) with NVIDIA JetPack SDK version 4.6.1, which comes with pre- installed Python 3.6, CUDA 10.2, and OpenCV 4.1.1. We further install PyTorch 1.10 to enable the GPU accelerated PhyCV. We demonstrate the results and metrics of running PhyCV on Jetson Nano in real-time for edge detection and low-light enhancement tasks. For 480p videos, both operations achieve beyond 38 FPS, which is sufficient for most cameras that capture videos at 30 FPS. For 720p videos, PhyCV low-light enhancement can operate at 24 FPS and PhyCV edge detection can operate at 17 FPS. == Highlights == === Modular Code Architecture === The code in PhyCV has a modular design which faithfully follows the physical process from which the algorithm was originated. Both PST and PAGE modules in the PhyCV library emulate the propagation of the input signal (original digital image) through a device with engineered diffractive property followed by coherent (phase) detection. The dispersive propagation applies a phase kernel to the frequency domain of the original image. This process has three steps in general, loading the image, initializing the kernel and applying the kernel. In the implementation of PhyCV, each algorithm is represented as a class in Python and each class has methods that simulate the steps described above. The modular code architecture follows the physics behind the algorithm. Please refer to the source code on GitHub for more details. === GPU Acceleration === PhyCV supports GPU acceleration. The GPU versions of PST and PAGE are built on PyTorch accelerated by the CUDA toolkit. The acceleration is beneficial for applying the algorithms in real-time image video processing and other deep learning tasks. The running time per frame of PhyCV algorithms on CPU (Intel i9-9900K) and GPU (NVIDIA TITAN RTX) for videos at different resolutions are shown below. Note that the PhyCV low-light enhancement operates in the HSV color space, so the running time also includes RGB to HSV conversion. However, for all running times using GPUs, we ignore the time of moving data from CPUs to GPUs and count the algorithm operation time only. == Installation and Examples == Please refer to the GitHub README file for a detailed technical documentation. == Current Limitations == === I/O (Input/Output) Bottleneck for Real-time Video Processing === When dealing with real-time video streams from cameras, the frames are captured and buffered in CPU and have to be moved to GPU to run the GPU-accelerated PhyCV algorithms. This process is time-consuming and it is a common bottleneck for real-time video-processing algorithms. === Lack of Parameter Adaptivity for Different Images === Currently, the parameters of PhyCV algorithms have to be manually tuned for different images. Although a set of pre-selected parameters work relatively well for a wide range of images, the lack of parameter adaptivity for different images remains a limitation for now.
Read more →
Microapp

A microapp is a super-specialized application designed to perform one task or use case with the only objective of doing it well. They follow the single responsibility principle, which states that "a class should have one and only one reason to change." Micro applications help developers create less complex applications while reducing costs by breaking down monolithic systems into groups of independent services acting as one system. A good example of Microapps would be https://docs.citrix.com/en-us/legacy-archive/downloads/microapps.pdfthat provide single purpose action from Salesforce and over 40 applications on its workspace. == Requirements and characteristics == Microapps usually are accessible on any device, display, or operating system without installation on the viewer's device. To qualify as a microapp, the entity must: be built and deployed as an independent software module bring together various media types into a single experience have advanced security and compliance features be functionally-extensible comply with granular data demands be agnostic single use case oriented Microapps differentiate from traditional web or mobile applications by how the end-user interacts with them. Consequently, they can be embedded in websites or viewed online to bypass app stores and are typically built to provide a focused experience to the user. == Usage == Microapps are typically used for commercial purposes to reduce development costs for projects not requiring the large scope of a traditional web or mobile application. In addition, they are often used to showcase in-depth information or enrich marketing material with interactivity. Lately, micro apps are being used to boost productivity by providing quick tools to people to reuse best practices. Users have been interacting with microapps for a while with suites like Microsoft 365 and Google Workspace, where each one of their end-user services could be considered as a microapp. All these microapps share a unique identity manager to provide a unified user experience. == Benefits == Replacing monolith systems with microapps provide several advantages like: Reduce complexity for developers and users. Smaller, more cohesive, and maintainable codebases Scalable organizations with decoupled, autonomous teams Allows for hyper-specialization Independent deployment Multi-stack == Cloud-native microapps == Technologies like Kubernetes, or OpenShift, allow companies to replace their monolith and legacy systems with modular software taking advantage of microapps on reducing costs and improve reliability and security. == Microapps vs. microservices == There is a widespread misunderstanding between these two concepts, which is the key difference. Microservices is an architectural style that is systems-centric, meaning it decouples the presentation and data layer using web services APIs. On the other side, micro apps behave more as a super-architecture style (that embraces microservices among other types), and it is user-centric, meaning they decouple the whole monolith system onto modules that are designed to interact with final users. Both architectural styles rely on modularity to provide high performance, scalability, and resilience. == Considerations == Developing Micro apps requires a different approach than traditional software, and user experience is crucial. The following considerations are essential for switching to microapps. To run multiple microapps is required a single identity management system. Microservices are well suited to make microapps more powerful Apps with different levels of maturity might create a non-unified user experience. Duplication of dependencies can create security issues and inefficiencies. Suitable for well-organized teams
Read more →
Egocentric vision

Egocentric vision or first-person vision is a sub-field of computer vision that entails analyzing images and videos captured by a wearable camera, which is typically worn on the head or on the chest and naturally approximates the visual field of the camera wearer. Consequently, visual data capture the part of the scene on which the user focuses to carry out the task at hand and offer a valuable perspective to understand the user's activities and their context in a naturalistic setting. The wearable camera looking forwards is often supplemented with a camera looking inward at the user's eye and able to measure a user's eye gaze, which is useful to reveal attention and to better understand the user's activity and intentions. == History == The idea of using a wearable camera to gather visual data from a first-person perspective dates back to the 70s, when Steve Mann invented "Digital Eye Glass", a device that, when worn, causes the human eye itself to effectively become both an electronic camera and a television display. Subsequently, wearable cameras were used for health-related applications in the context of Humanistic Intelligence and Wearable AI. Egocentric vision is best done from the point-of-eye, but may also be done by way of a neck-worn camera when eyeglasses would be in-the-way. This neck-worn variant was popularized by way of the Microsoft SenseCam in 2006 for experimental health research works. The interest of the computer vision community into the egocentric paradigm has been arising slowly entering the 2010s and it is rapidly growing in recent years, boosted by both the impressive advances in the field of wearable technology and by the increasing number of potential applications. The prototypical first-person vision system described by Kanade and Hebert, in 2012 is composed by three basic components: a localization component able to estimate the surrounding, a recognition component able to identify object and people, and an activity recognition component, able to provide information about the current activity of the user. Together, these three components provide a complete situational awareness of the user, which in turn can be used to provide assistance to the user or to the caregiver. Following this idea, the first computational techniques for egocentric analysis focused on hand-related activity recognition and social interaction analysis. Also, given the unconstrained nature of the video and the huge amount of data generated, temporal segmentation and summarization were among the first problems addressed. After almost ten years of egocentric vision (2007–2017), the field is still undergoing diversification. Emerging research topics include: Social saliency estimation Multi-agent egocentric vision systems Privacy preserving techniques and applications Attention-based activity analysis Social interaction analysis Hand pose analysis Ego graphical User Interfaces (EUI) Understanding social dynamics and attention Revisiting robotic vision and machine vision as egocentric sensing Activity forecasting Gaze prediction == Technical challenges == Today's wearable cameras are small and lightweight digital recording devices that can acquire images and videos automatically, without the user intervention, with different resolutions and frame rates, and from a first-person point of view. Therefore, wearable cameras are naturally primed to gather visual information from our everyday interactions since they offer an intimate perspective of the visual field of the camera wearer. Depending on the frame rate, it is common to distinguish between photo-cameras (also called lifelogging cameras) and video-cameras. The former (e.g., Narrative Clip and Microsoft SenseCam), are commonly worn on the chest, and are characterized by a very low frame rate (up to 2fpm) that allows to capture images over a long period of time without the need of recharging the battery. Consequently, they offer considerable potential for inferring knowledge about e.g. behaviour patterns, habits or lifestyle of the user. However, due to the low frame-rate and the free motion of the camera, temporally adjacent images typically present abrupt appearance changes so that motion features cannot be reliably estimated. The latter (e.g., Google Glass, GoPro), are commonly mounted on the head, and capture conventional video (around 35fps) that allows to capture fine temporal details of interactions. Consequently, they offer potential for in-depth analysis of daily or special activities. However, since the camera is moving with the wearer head, it becomes more difficult to estimate the global motion of the wearer and in the case of abrupt movements, the images can result blurred. In both cases, since the camera is worn in a naturalistic setting, visual data present a huge variability in terms of illumination conditions and object appearance. Moreover, the camera wearer is not visible in the image and what he/she is doing has to be inferred from the information in the visual field of the camera, implying that important information about the wearer, such for instance as pose or facial expression estimation, is not available. == Applications == A collection of studies published in a special theme issue of the American Journal of Preventive Medicine has demonstrated the potential of lifelogs captured through wearable cameras from a number of viewpoints. In particular, it has been shown that used as a tool for understanding and tracking lifestyle behaviour, lifelogs would enable the prevention of noncommunicable diseases associated to unhealthy trends and risky profiles (such as obesity and depression). In addition, used as a tool of re-memory cognitive training, lifelogs would enable the prevention of cognitive and functional decline in elderly people. More recently, egocentric cameras have been used to study human and animal cognition, human-human social interaction, human-robot interaction, human expertise in complex tasks. Other applications include navigation/assistive technologies for the blind, monitoring and assistance of industrial workflows, and augmented reality interfaces.
Read more →
Knowledge graph embedding

In representation learning, knowledge graph embedding (KGE), also called knowledge representation learning (KRL), or multi-relation learning, is a machine learning task of learning a low-dimensional representation of a knowledge graph's entities and relations while preserving their semantic meaning. Leveraging their embedded representation, knowledge graphs can be used for various applications such as link prediction, triple classification, entity recognition, clustering, and relation extraction. == Definition == A knowledge graph G = { E , R , F } {\displaystyle {\mathcal {G}}=\{E,R,F\}} is a collection of entities E {\displaystyle E} , relations R {\displaystyle R} , and facts F {\displaystyle F} . A fact is a triple ( h , r , t ) ∈ F {\displaystyle (h,r,t)\in F} that denotes a link r ∈ R {\displaystyle r\in R} between the head h ∈ E {\displaystyle h\in E} and the tail t ∈ E {\displaystyle t\in E} of the triple. Another notation that is often used in the literature to represent a triple (or fact) is ⟨ head , relation , tail ⟩ {\displaystyle \langle {\text{head}},{\text{relation}},{\text{tail}}\rangle } . This notation is called the Resource Description Framework (RDF). A knowledge graph represents the knowledge related to a specific domain; leveraging this structured representation, it is possible to infer a piece of new knowledge from it after some refinement steps. However, nowadays, people have to deal with the sparsity of data and the computational inefficiency to use them in a real-world application. The embedding of a knowledge graph is a function that translates each entity and each relation into a vector of a given dimension d {\displaystyle d} , called embedding dimension. It is even possible to embed the entities and relations with different dimensions. The embedding vectors can then be used for other tasks. A knowledge graph embedding is characterized by four aspects: Representation space: The low-dimensional space in which the entities and relations are represented. Scoring function: A measure of the goodness of a triple-embedded representation. Encoding models: The modality in which the embedded representation of the entities and relations interact with each other. Additional information: Any additional information coming from the knowledge graph that can enrich the embedded representation. Usually, an ad hoc scoring function is integrated into the general scoring function for each additional piece of information. == Embedding procedure == All algorithms for creating a knowledge graph embedding follow the same approach. First, the embedding vectors are initialized to random values. Then, they are iteratively optimized using a training set of triples. In each iteration, a batch of size b {\displaystyle b} triples is sampled from the training set, and a triple from it is sampled and corrupted—i.e., a triple that does not represent a true fact in the knowledge graph. The corruption of a triple involves substituting the head or the tail (or both) of the triple with another entity that makes the fact false. The original triple and the corrupted triple are added in the training batch, and then the embeddings are updated, optimizing a scoring function. Iteration stops when a stop condition is reached. Usually, the stop condition depends on the overfitting of the training set. At the end, the learned embeddings should have extracted semantic meaning from the training triples and should correctly predict unseen true facts in the knowledge graph. === Pseudocode === The following is the pseudocode for the general embedding procedure. algorithm Compute entity and relation embeddings input: The training set S = { ( h , r , t ) } {\displaystyle S=\{(h,r,t)\}} , entity set E {\displaystyle E} , relation set R {\displaystyle R} , embedding dimension k {\displaystyle k} output: Entity and relation embeddings initialization: the entities e {\displaystyle e} and relations r {\displaystyle r} embeddings (vectors) are randomly initialized while stop condition do S b a t c h ← s a m p l e ( S , b ) {\displaystyle S_{batch}\leftarrow sample(S,b)} // Sample a batch from the training set for each ( h , r , t ) {\displaystyle (h,r,t)} in S b a t c h {\displaystyle S_{batch}} do ( h ′ , r , t ′ ) ← s a m p l e ( S ′ ) {\displaystyle (h',r,t')\leftarrow sample(S')} // Sample a corrupted fact T b a t c h ← T b a t c h ∪ { ( ( h , r , t ) , ( h ′ , r , t ′ ) ) } {\displaystyle T_{batch}\leftarrow T_{batch}\cup \{((h,r,t),(h',r,t'))\}} end for Update embeddings by minimizing the loss function end while == Performance indicators == These indexes are often used to measure the embedding quality of a model. The simplicity of the indexes makes them very suitable for evaluating the performance of an embedding algorithm even on a large scale. Given Q {\displaystyle {\ce {Q}}} as the set of all ranked predictions of a model, it is possible to define three different performance indexes: Hits@K, MR, and MRR. === Hits@K === Hits@K or in short, H@K, is a performance index that measures the probability to find the correct prediction in the first top K model predictions. Usually, it is used k = 10 {\displaystyle k=10} . Hits@K reflects the accuracy of an embedding model to predict the relation between two given triples correctly. Hits@K = | { q ∈ Q : q < k } | | Q | ∈ [ 0 , 1 ] {\displaystyle ={\frac {|\{q\in Q:q Read more →
Grammar checker

A grammar checker, in computing terms, is a program, or part of a program, that attempts to verify written text for grammatical correctness. Grammar checkers are most often implemented as a feature of a larger program, such as a word processor, but are also available as a stand-alone application that can be activated from within programs that work with editable text. The implementation of a grammar checker makes use of natural language processing. == History == The earliest "grammar checkers" were programs that checked for punctuation and style inconsistencies, rather than a complete range of possible grammatical errors. The first system was called Writer's Workbench, and was a set of writing tools included with Unix systems as far back as the 1970s. The whole Writer's Workbench package included several separate tools to check for various writing problems. The "diction" tool checked for wordy, trite, clichéd or misused phrases in a text. The tool would output a list of questionable phrases and provide suggestions for improving the writing. The "style" tool analyzed the writing style of a given text. It performed a number of readability tests on the text and output the results, and gave some statistical information about the sentences of the text. Aspen Software of Albuquerque, New Mexico released the earliest version of a diction and style checker for personal computers, Grammatik, in 1981. Grammatik was first available for a Radio Shack - TRS-80, and soon had versions for CP/M and the IBM PC. Reference Software International of San Francisco, California, acquired Grammatik in 1985. Development of Grammatik continued, and it became an actual grammar checker that could detect writing errors beyond simple style checking. Other early diction and style checking programs included Punctuation & Style, Correct Grammar, RightWriter and PowerEdit. While all the earliest programs started as simple diction and style checkers, all eventually added various levels of language processing, and developed some level of true grammar checking capability. Until 1992, grammar checkers were sold as add-on programs. There were a large number of different word processing programs available at that time, with WordPerfect and Microsoft Word the top two in market share. In 1992, Microsoft decided to add grammar checking as a feature of Word, and licensed CorrecText, a grammar checker from Houghton Mifflin that had not yet been marketed as a standalone product. WordPerfect answered Microsoft's move by acquiring Reference Software, and the direct descendant of Grammatik is still included with WordPerfect. As of 2019, grammar checkers are built into systems like Google Docs, browser extensions like Grammarly and Qordoba, desktop applications like Ginger, free and open-source software like LanguageTool, and text editor plugins like those available from WebSpellChecker Software. == Technical issues == The earliest writing style programs checked for wordy, trite, clichéd, or misused phrases in a text. This process was based on simple pattern matching. The heart of the program was a list of many hundreds or thousands of phrases that are considered poor writing by many experts. The list of questionable phrases included alternative wording for each phrase. The checking program would simply break text into sentences, check for any matches in the phrase dictionary, flag suspect phrases and show an alternative. These programs could also perform some mechanical checks. For example, they would typically flag doubled words, doubled punctuation, some capitalization errors, and other simple mechanical mistakes. True grammar checking is more complex. While a programming language has a very specific syntax and grammar, this is not so for natural languages. One can write a somewhat complete formal grammar for a natural language, but there are usually so many exceptions in real usage that a formal grammar is of minimal help in writing a grammar checker. One of the most important parts of a natural language grammar checker is a dictionary of all the words in the language, along with the part of speech of each word. The fact that a natural word may be used as any one of several parts of speech (such as "free" being used as an adjective, adverb, noun, or verb) greatly increases the complexity of any grammar checker. A grammar checker will find each sentence in a text, look up each word in the dictionary, and then attempt to parse the sentence into a form that matches a grammar. Using various rules, the program can then detect various errors, such as agreement in tense, number, word order, and so on. It is also possible to detect some stylistic problems with the text. For example, some popular style guides such as The Elements of Style deprecate excessive use of the passive voice. Grammar checkers may attempt to identify passive sentences and suggest an active-voice alternative. The software elements required for grammar checking are closely related to some of the development issues that need to be addressed for speech recognition software. In voice recognition, parsing can be used to help predict which word is most likely intended, based on part of speech and position in the sentence. In grammar checking, the parsing is used to detect words that fail to follow accepted grammar usage. Recently, research has focused on developing algorithms which can recognize grammar errors based on the context of the surrounding words. == Criticism == Grammar checkers are considered a type of foreign language writing aid which non-native speakers can use to proofread their writings as such programs endeavor to identify syntactical errors. However, as with other computerized writing aids such as spell checkers, popular grammar checkers are often criticized when they fail to spot errors and incorrectly flag correct text as erroneous. The linguist Geoffrey K. Pullum argued in 2007 that they were generally so inaccurate as to do more harm than good: "for the most part, accepting the advice of a computer grammar checker on your prose will make it much worse, sometimes hilariously incoherent."
Read more →
PARRY

PARRY was an early example of a chatbot, implemented in 1972 by psychiatrist Kenneth Colby. == History == PARRY was written in 1972 by psychiatrist Kenneth Colby, then at Stanford University. While ELIZA was a simulation of a Rogerian therapist, PARRY attempted to simulate a person with paranoid schizophrenia. The program implemented a crude model of the behavior of a person with paranoid schizophrenia based on concepts, conceptualizations, and beliefs (judgements about conceptualizations: accept, reject, neutral). It also embodied a conversational strategy, and as such was a much more serious and advanced program than ELIZA. It was described as "ELIZA with attitude". PARRY was tested in the early 1970s using a variation of the Turing Test. A group of experienced psychiatrists analysed a combination of real patients and computers running PARRY through teleprinters. Another group of 33 psychiatrists were shown transcripts of the conversations. The two groups were then asked to identify which of the "patients" were human and which were computer programs. The psychiatrists were able to make the correct identification only 48 percent of the time — a figure consistent with random guessing. PARRY and ELIZA (also known as "the Doctor") interacted several times. The most famous of these exchanges occurred at the ICCC 1972, where PARRY and ELIZA were hooked up over ARPANET and responded to each other.
Read more →
LaMDA

LaMDA (Language Model for Dialogue Applications) is a family of conversational large language models developed by Google. Originally developed and introduced as Meena in 2020, the first-generation LaMDA was announced during the 2021 Google I/O keynote, while the second generation was announced the following year. In June 2022, LaMDA gained widespread attention when Google engineer Blake Lemoine made claims that the chatbot had become sentient. The scientific community has largely rejected Lemoine's claims, though it has led to conversations about the efficacy of the Turing test, which measures whether a computer can pass for a human. In February 2023, Google announced Gemini (then Bard), a conversational artificial intelligence chatbot powered by LaMDA, to counter the rise of OpenAI's ChatGPT. == History == === Background === On January 28, 2020, Google unveiled Meena, a neural network-powered chatbot with 2.6 billion parameters, which Google claimed to be superior to all other existing chatbots. The company previously hired computer scientist Ray Kurzweil in 2012 to develop multiple chatbots for the company, including one named Danielle. The Google Brain research team, who developed Meena, hoped to release the chatbot to the public in a limited capacity, but corporate executives refused on the grounds that Meena violated Google's "AI principles around safety and fairness". Meena was later renamed LaMDA as its data and computing power increased, and the Google Brain team again sought to deploy the software to the Google Assistant, the company's virtual assistant software, in addition to opening it up to a public demo. Both requests were once again denied by company leadership. LaMDA's two lead researchers, Daniel de Freitas and Noam Shazeer, eventually left the company in frustration. === First generation === Google announced the LaMDA conversational large language model during the Google I/O keynote on May 18, 2021, powered by artificial intelligence. The acronym stands for "Language Model for Dialogue Applications". Built on the seq2seq architecture, transformer-based neural networks developed by Google Research in 2017, LaMDA was trained on human dialogue and stories, allowing it to engage in open-ended conversations. Google states that responses generated by LaMDA have been ensured to be "sensible, interesting, and specific to the context". LaMDA has access to multiple symbolic text processing systems, including a database, a real-time clock and calendar, a mathematical calculator, and a natural language translation system, giving it superior accuracy in tasks supported by those systems, and making it among the first dual process chatbots. LaMDA is also not stateless because its "sensibleness" metric is fine-tuned by "pre-conditioning" each dialog turn by prepending many of the most recent dialog interactions, on a user-by-user basis. LaMDA is tuned on nine unique performance metrics: sensibleness, specificity, interestingness, safety, groundedness, informativeness, citation accuracy, helpfulness, and role consistency. Tests by Google indicated that LaMDA surpassed human responses in the area of interestingness. The pre-training dataset consists of 2.97B documents, 1.12B dialogs, and 13.39B utterances, for a total of 1.56T words. The largest LaMDA model has 137B non-embedding parameters. === Second generation === On May 11, 2022, Google unveiled LaMDA 2, the successor to LaMDA, during the 2022 Google I/O keynote. The new incarnation of the model draws examples of text from numerous sources, using it to formulate unique "natural conversations" on topics that it may not have been trained to respond to. === Sentience claims === On June 11, 2022, The Washington Post reported that Google engineer Blake Lemoine had been placed on paid administrative leave after Lemoine told company executives Blaise Agüera y Arcas and Jen Gennai that LaMDA had become sentient. Lemoine came to this conclusion after the chatbot made questionable responses to questions regarding self-identity, moral values, religion, and Isaac Asimov's Three Laws of Robotics. Google refuted these claims, insisting that there was substantial evidence to indicate that LaMDA was not sentient. In an interview with Wired, Lemoine reiterated his claims that LaMDA was "a person" as dictated by the Thirteenth Amendment to the U.S. Constitution, comparing it to an "alien intelligence of terrestrial origin". He further revealed that he had been dismissed by Google after he hired an attorney on LaMDA's behalf after the chatbot requested that Lemoine do so. On July 22, Google fired Lemoine, asserting that Blake had violated their policies "to safeguard product information" and rejected his claims as "wholly unfounded". Internal controversy instigated by the incident prompted Google executives to decide against releasing LaMDA to the public, which it had previously been considering. Lemoine's claims were widely pushed back by the scientific community. Many experts rejected the idea that LaMDA was sentient, including former New York University psychology professor Gary Marcus, David Pfau of Google sister company DeepMind, Erik Brynjolfsson of the Institute for Human-Centered Artificial Intelligence at Stanford University, and University of Surrey professor Adrian Hilton. Yann LeCun, who leads Meta Platforms' AI research team, stated that neural networks such as LaMDA were "not powerful enough to attain true intelligence". University of California, Santa Cruz professor Max Kreminski noted that LaMDA's architecture did not "support some key capabilities of human-like consciousness" and that its neural network weights were "frozen", assuming it was a typical large language model. Philosopher Nick Bostrom noted, however, that the lack of precise and consensual criteria for determining whether a system is conscious warrants some uncertainty. IBM Watson lead developer David Ferrucci compared how LaMDA appeared to be human in the same way Watson did when it was first introduced. Former Google AI ethicist Timnit Gebru called Lemoine a victim of a "hype cycle" initiated by researchers and the media. Lemoine's claims have also generated discussion on whether the Turing test remained useful to determine researchers' progress toward achieving artificial general intelligence, with Will Omerus of the Post opining that the test actually measured whether machine intelligence systems were capable of deceiving humans, while Brian Christian of The Atlantic said that the controversy was an instance of the ELIZA effect. == Products == === AI Test Kitchen === With the unveiling of LaMDA 2 in May 2022, Google also launched the AI Test Kitchen, a mobile application for the Android operating system powered by LaMDA capable of providing lists of suggestions on-demand based on a complex goal. Originally open only to Google employees, the app was set to be made available to "select academics, researchers, and policymakers" by invitation sometime in the year. In August, the company began allowing users in the U.S. to sign up for early access. In November, Google released a "season 2" update to the app, integrating a limited form of Google Brain's Imagen text-to-image model. A third iteration of the AI Test Kitchen was in development by January 2023, expected to launch at I/O later that year. Following the 2023 I/O keynote in May, Google added MusicLM, an AI-powered music generator first previewed in January, to the AI Test Kitchen app. In August, the app was delisted from Google Play and the Apple App Store, instead moving completely online. === Bard === On February 6, 2023, Google announced Bard, a conversational AI chatbot powered by LaMDA, in response to the unexpected popularity of OpenAI's ChatGPT chatbot. Google positions the chatbot as a "collaborative AI service" rather than a search engine. Bard became available for early access on March 21. === Other products === In addition to Bard, Pichai also unveiled the company's Generative Language API, an application programming interface also based on LaMDA, which he announced would be opened up to third-party developers in March 2023. == Architecture == LaMDA is a decoder-only Transformer language model. It is pre-trained on a text corpus that includes both documents and dialogs consisting of 1.56 trillion words, and is then trained with fine-tuning data generated by manually annotated responses for "sensibleness, interestingness, and safety". LaMDA was retrieval-augmented to improve the accuracy of facts provided to the user. Three different models were tested, with the largest having 137 billion non-embedding parameters:
Read more →
Graphics address remapping table

The graphics address remapping table (GART), also known as the graphics aperture remapping table, or graphics translation table (GTT), is an I/O memory management unit (IOMMU) used by Accelerated Graphics Port (AGP) and PCI Express (PCIe) graphics cards. The GART allows the graphics card direct memory access (DMA) to the host system memory, through which buffers of textures, polygon meshes and other data are loaded. AMD later reused the same mechanism for I/O virtualization with other peripherals including disk controllers and network adapters. A GART is used as a means of data exchange between the main memory and video memory through which buffers (i.e. paging/swapping) of textures, polygon meshes and other data are loaded, but can also be used to expand the amount of video memory available for systems with only integrated or shared graphics (i.e. no discrete or inbuilt graphics processor), such as Intel HD Graphics processors. However, this type of memory (expansion) remapping has a caveat that affects the entire system: specifically, any GART, pre-allocated memory becomes pooled and cannot be utilised for any other purposes but graphics memory and display rendering. Since PCI Express, the GART is extended to the GTT (Graphics Translation Table), which act as a buffer or cache between system memory and graphics card, and in PCI Express, the GTT buffer size is changeable by the GPU driver. == Operating system support == === Windows === Support for AGP GART was added since Windows 95 OSR2. Later, support for GTT was added since Windows XP SP2 and Windows Vista. === Linux === Jeff Hartmann served as the primary maintainer of the Linux kernel's agpgart driver, which began as part of Brian Paul's Utah GLX accelerated Mesa 3D driver project. The developers primarily targeted Linux 2.4.x kernels, but made patches available against older 2.2.x kernels. Dave Jones heavily reworked agpgart for the Linux 2.6.x kernels, along with more contributions from Jeff Hartmann. === FreeBSD === In FreeBSD, the agpgart driver appeared in its 4.1 release. === Solaris === AGPgart support was introduced into Solaris Express Developer Edition as of its 7/05 release.
Read more →
Transderivational search

Transderivational search (often abbreviated to TDS) is a psychological and cybernetics term, meaning when a search is being conducted for a fuzzy match across a broad field. In computing the equivalent function can be performed using content-addressable memory. Unlike usual searches, which look for literal (i.e. exact, logical, or regular expression) matches, a transderivational search is a search for a possible meaning or possible match as part of communication, and without which an incoming communication cannot be made any sense of whatsoever. It is thus an integral part of processing language, and of attaching meaning to communication. In NLP (Neuro-linguistic programming), a transderivational search (Bandler and Grinder, 1976) is essentially the process of searching back through one's stored memories and mental representations to find the personal reference experiences from which a current understanding or mental map has been derived. By the end of 1976, Grinder and Bandler had combined Satir’s and Perls’ language patterns and Erickson’s hypnotic language and use of metaphor with anchoring to create new processes that they called collapsing anchors, trans-derivational search, changing personal history, and reframing. A psychological example of TDS is in Ericksonian hypnotherapy, where vague suggestions are used that the patient must process intensely in order to find their own meanings, thus ensuring that the practitioner does not intrude his own beliefs into the subject's inner world. == TDS in human communication and processing == Because TDS is a compelling, automatic and unconscious state of internal focus and processing (i.e. a type of everyday trance state), and often a state of internal lack of certainty, or openness to finding an answer (since something is being checked out at that moment), it can be utilized or interrupted, in order to create, or deepen, trance. TDS is a fundamental part of human language and cognitive processing. Arguably, every word or utterance a person hears, for example, and everything they see or feel and take note of, results in a very brief trance while TDS is carried out to establish a contextual meaning for it. === Examples === Leading statements: "And those thoughts you had yesterday..." the human mind cannot process hearing this phrase, without at some level searching internally for some thoughts or other that it had yesterday, to make the subject of the sentence. "The many colors that fruit can be" likewise starts the human mind considering even if briefly, different fruit sorted by color. "You did it again, didn't you!" This everyday manipulative use of TDS usually sends the recipient looking internally for some "it" they may have done for which blame is being fairly given. Regardless of whether such a matter can be identified, guilt or anger may result. "There has been pain, hasn't there" the mind of a patient suffering an illness will find it very hard or impossible to hear or answer this sentence without conducting internal searches to verify whether this is true or not, or to find an example if so. "You'd forgotten something [or: some part of your body], hadn't you?" the mind usually checks through the various things, or parts of the body, on hearing this, seeing if each in turn has been forgotten. Textual ambiguity: "Do you remember line dancing on the steps?" Without sufficient context, some statements may trigger TDS in order to resolve inherent ambiguity in the interpretation of a posed question. Do I remember a bygone fad called "line dancing on the steps"? Do I remember personally engaging in dancing in the past? Do I remember my routine practice dancing by focusing on the steps of the dance? Do I tend to forget about dancing when I am standing on steps? "Penny-wise and pound the table dance to the beat of a different drummer". The mixing of cliché and stock phrases may trigger TDS in order to reconcile the discrepancies between expected and actual utterances in sequence. Although TDS is often associated with spoken language, it can be induced in any perceptual system. Thus Milton Erickson's "hypnotic handshake" is a technique that leaves the other person performing TDS in search of meaning to a deliberately ambiguous use of touch.
Read more →
Transderivational search

Transderivational search (often abbreviated to TDS) is a psychological and cybernetics term, meaning when a search is being conducted for a fuzzy match across a broad field. In computing the equivalent function can be performed using content-addressable memory. Unlike usual searches, which look for literal (i.e. exact, logical, or regular expression) matches, a transderivational search is a search for a possible meaning or possible match as part of communication, and without which an incoming communication cannot be made any sense of whatsoever. It is thus an integral part of processing language, and of attaching meaning to communication. In NLP (Neuro-linguistic programming), a transderivational search (Bandler and Grinder, 1976) is essentially the process of searching back through one's stored memories and mental representations to find the personal reference experiences from which a current understanding or mental map has been derived. By the end of 1976, Grinder and Bandler had combined Satir’s and Perls’ language patterns and Erickson’s hypnotic language and use of metaphor with anchoring to create new processes that they called collapsing anchors, trans-derivational search, changing personal history, and reframing. A psychological example of TDS is in Ericksonian hypnotherapy, where vague suggestions are used that the patient must process intensely in order to find their own meanings, thus ensuring that the practitioner does not intrude his own beliefs into the subject's inner world. == TDS in human communication and processing == Because TDS is a compelling, automatic and unconscious state of internal focus and processing (i.e. a type of everyday trance state), and often a state of internal lack of certainty, or openness to finding an answer (since something is being checked out at that moment), it can be utilized or interrupted, in order to create, or deepen, trance. TDS is a fundamental part of human language and cognitive processing. Arguably, every word or utterance a person hears, for example, and everything they see or feel and take note of, results in a very brief trance while TDS is carried out to establish a contextual meaning for it. === Examples === Leading statements: "And those thoughts you had yesterday..." the human mind cannot process hearing this phrase, without at some level searching internally for some thoughts or other that it had yesterday, to make the subject of the sentence. "The many colors that fruit can be" likewise starts the human mind considering even if briefly, different fruit sorted by color. "You did it again, didn't you!" This everyday manipulative use of TDS usually sends the recipient looking internally for some "it" they may have done for which blame is being fairly given. Regardless of whether such a matter can be identified, guilt or anger may result. "There has been pain, hasn't there" the mind of a patient suffering an illness will find it very hard or impossible to hear or answer this sentence without conducting internal searches to verify whether this is true or not, or to find an example if so. "You'd forgotten something [or: some part of your body], hadn't you?" the mind usually checks through the various things, or parts of the body, on hearing this, seeing if each in turn has been forgotten. Textual ambiguity: "Do you remember line dancing on the steps?" Without sufficient context, some statements may trigger TDS in order to resolve inherent ambiguity in the interpretation of a posed question. Do I remember a bygone fad called "line dancing on the steps"? Do I remember personally engaging in dancing in the past? Do I remember my routine practice dancing by focusing on the steps of the dance? Do I tend to forget about dancing when I am standing on steps? "Penny-wise and pound the table dance to the beat of a different drummer". The mixing of cliché and stock phrases may trigger TDS in order to reconcile the discrepancies between expected and actual utterances in sequence. Although TDS is often associated with spoken language, it can be induced in any perceptual system. Thus Milton Erickson's "hypnotic handshake" is a technique that leaves the other person performing TDS in search of meaning to a deliberately ambiguous use of touch.
Read more →