AI Video Tools

Explore the best AI Video Tools — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.

Software development process

A software development process prescribes a process for developing software. It typically divides an overall effort into smaller steps or sub-processes that are intended to ensure high-quality results. The process may describe specific deliverables – artifacts to be created and completed. Although not strictly limited to it, software development process often refers to the high-level process that governs the development of a software system from its beginning to its end of life – known as a methodology, model or framework. The system development life cycle (SDLC) describes the typical phases that a development effort goes through from the beginning to the end of life for a system – including a software system. A methodology prescribes how engineers go about their work in order to move the system through its life cycle. A methodology is a classification of processes or a blueprint for a process that is devised for the SDLC. For example, many processes can be classified as a spiral model. Software process and software quality are closely interrelated; some unexpected facets and effects have been observed in practice. == Methodology == The SDLC drives the definition of a methodology in that a methodology must address the phases of the SDLC. Generally, a methodology is designed to result in a high-quality system that meets or exceeds expectations (requirements) and is delivered on time and within budget even though computer systems can be complex and integrate disparate components. Various methodologies have been devised, including waterfall, spiral, agile, rapid prototyping, incremental, and synchronize and stabilize. A major difference between methodologies is the degree to which the phases are sequential vs. iterative. Agile methodologies, such as XP and scrum, focus on lightweight processes that allow for rapid changes. Iterative methodologies, such as Rational Unified Process and dynamic systems development method, focus on stabilizing project scope and iteratively expanding or improving products. Sequential or big-design-up-front (BDUF) models, such as waterfall, focus on complete and correct planning to guide larger projects and limit risks to successful and predictable results. Anamorphic development is guided by project scope and adaptive iterations. In scrum, for example, one could say a single user story goes through all the phases of the SDLC within a two-week sprint. By contrast the waterfall methodology, where every business requirement is translated into feature/functional descriptions which are then all implemented typically over a period of months or longer. A project can include both a project life cycle (PLC) and an SDLC, which describe different activities. According to Taylor (2004), "the project life cycle encompasses all the activities of the project, while the systems development life cycle focuses on realizing the product requirements". === History === The term SDLC is often used as an abbreviated version of SDLC methodology. Further, some use SDLC and traditional SDLC to mean the waterfall methodology. According to Elliott (2004), SDLC "originated in the 1960s, to develop large scale functional business systems in an age of large scale business conglomerates. Information systems activities revolved around heavy data processing and number crunching routines". The structured systems analysis and design method (SSADM) was produced for the UK government Office of Government Commerce in the 1980s. Ever since, according to Elliott (2004), "the traditional life cycle approaches to systems development have been increasingly replaced with alternative approaches and frameworks, which attempted to overcome some of the inherent deficiencies of the traditional SDLC". The main idea of the SDLC has been "to pursue the development of information systems in a very deliberate, structured and methodical way, requiring each stage of the life cycle––from the inception of the idea to delivery of the final system––to be carried out rigidly and sequentially" within the context of the framework being applied. Other methodologies were devised later: 1970s Structured programming since 1969 Cap Gemini SDM, originally from PANDATA, the first English translation was published in 1974. SDM stands for System Development Methodology 1980s Structured systems analysis and design method (SSADM) from 1980 onwards Information Requirement Analysis/Soft systems methodology 1990s Object-oriented programming (OOP) developed in the early 1960s and became a dominant programming approach during the mid-1990s Rapid application development (RAD), since 1991 Dynamic systems development method (DSDM), since 1994 Scrum, since 1995 Team software process, since 1998 Rational Unified Process (RUP), maintained by IBM since 1998 Extreme programming, since 1999 2000s Agile Unified Process (AUP) maintained since 2005 by Scott Ambler Disciplined agile delivery (DAD) Supersedes AUP 2010s Scaled Agile Framework (SAFe) Large-Scale Scrum (LeSS) DevOps Since DSDM in 1994, all of the methodologies on the above list except RUP have been agile methodologies - yet many organizations, especially governments, still use pre-agile processes (often waterfall or similar). === Examples === The following are notable methodologies somewhat ordered by popularity. Agile Agile software development refers to a group of frameworks based on iterative development, where requirements and solutions evolve via collaboration between self-organizing cross-functional teams. The term was coined in the year 2001 when the Agile Manifesto was formulated. Waterfall The waterfall model is a sequential development approach, in which development flows one-way (like a waterfall) through the SDLC phases. Spiral In 1988, Barry Boehm published a software system development spiral model, which combines key aspects of the waterfall model and rapid prototyping, in an effort to combine advantages of top-down and bottom-up concepts. It emphases a key area many felt had been neglected by other methodologies: deliberate iterative risk analysis, particularly suited to large-scale complex systems. Incremental Various methods combine linear and iterative methodologies, with the primary objective of reducing inherent project risk by breaking a project into smaller segments and providing more ease-of-change during the development process. Prototyping Software prototyping is about creating prototypes, i.e. incomplete versions of the software program being developed. Rapid Rapid application development (RAD) is a methodology which favors iterative development and the rapid construction of prototypes instead of large amounts of up-front planning. The "planning" of software developed using RAD is interleaved with writing the software itself. The lack of extensive pre-planning generally allows software to be written much faster and makes it easier to change requirements. Shape Up Shape Up is a software development approach introduced by Basecamp in 2018. It is a set of principles and techniques that Basecamp developed internally to overcome the problem of projects dragging on with no clear end. Its primary target audience is remote teams. Shape Up has no estimation and velocity tracking, backlogs, or sprints, unlike waterfall, agile, or scrum. Instead, those concepts are replaced with appetite, betting, and cycles. As of 2022, besides Basecamp, notable organizations that have adopted Shape Up include UserVoice and Block. Chaos Chaos model has one main rule: always resolve the most important issue first. Incremental funding Incremental funding methodology - an iterative approach. Lightweight Lightweight methodology - a general term for methods that only have a few rules and practices. Structured systems analysis and design Structured systems analysis and design method - a specific version of waterfall. Slow programming As part of the larger slow movement, emphasizes careful and gradual work without (or minimal) time pressures. Slow programming aims to avoid bugs and overly quick release schedules. V-Model V-Model (software development) - an extension of the waterfall model. Unified Process Unified Process (UP) is an iterative software development methodology framework, based on Unified Modeling Language (UML). UP organizes the development of software into four phases, each consisting of one or more executable iterations of the software at that stage of development: inception, elaboration, construction, and guidelines. === Comparison === The waterfall model describes the SDLC phases such that each builds on the result of the previous one. Not every project requires that the phases be sequential. For relatively simple projects, phases may be combined or overlapping. Alternative methodologies to waterfall are described and compared below. == Process meta-models == Some process models are abstract descriptions for evaluating, comparing, and improving the specific process adopted by an organization. ISO/IEC 12207 ISO/IEC 12207 i
Read more →
Electronic business

Electronic business (also known as online business or e-business) is any kind of business or commercial activity that includes sharing information across the internet. Commerce constitutes the exchange of products and services between businesses, groups, and individuals; and can be seen as one of the essential activities of any business. E-commerce focuses on the use of ICT to enable the external activities and relationships of the business with individuals, groups, and other organizations, while e-business does not only deal with online commercial operations of enterprises, but also deals with their other organizational matters such as human resource management and production. The term "e-business" was coined by IBM's marketing and Internet team in 1996. == Market participants == Electronic business can take place between a very large number of market participants; it can be between business and consumer, private individuals, public administrations, or any other organizations such as non-governmental organizations (NGOs). These various market participants can be divided into three main groups: Business (B) Consumer (C) Administration (A) All of them can be either buyers or service providers within the market. There are nine possible combinations for electronic business relationships. B2C and B2B belong to E-commerce, while A2B and A2A belong to the E-government sector which is also a part of the electronic business. == History == One of the founding pillars of electronic business was the development of the Electronic Data Interchange (EDI) electronic data interchange. This system replaced traditional mailing and faxing of documents with a digital transfer of data from one computer to another, without any human intervention. Michael Aldrich is considered the developer of the predecessor to online shopping. In 1979, the entrepreneur connected a television set to a transaction processing computer with a telephone line and called it "teleshopping", meaning shopping at distance. From the mid-nineties, major advancements were made in the commercial use of the Internet. Amazon, which launched in 1995, started as an online bookstore and grew to become nowadays the largest online retailer worldwide, selling food, toys, electronics, apparel and more. Other successful stories of online marketplaces include eBay or Etsy. In 1994, IBM, with its agency Ogilvy & Mather, began to use its foundation in IT solutions and expertise to market itself as a leader of conducting business on the Internet through the term "e-business." Then CEO Louis V. Gerstner, Jr. was prepared to invest $1 billion to market this new brand. After conducting worldwide market research in October 1997, IBM began with an eight-page piece in The Wall Street Journal that would introduce the concept of "e-business" and advertise IBM's expertise in the new field. IBM decided not to trademark the term "e-business" in the hopes that other companies would use the term and create an entirely new industry. However, this proved to be too successful and by 2000, to differentiate itself, IBM launched a $300 million campaign about its "e-business infrastructure" capabilities. Since that time, the terms, "e-business" and "e-commerce" have been loosely interchangeable and have become a part of the common vernacular. According to the U.S. Department Of Commerce, the estimated retail e-commerce sales in Q1 2020 were representing almost 12% of total U.S. retail sales, against 4% for Q1 2010. == Business model == The transformation toward e-business is complex and in order for it to succeed, there is a need to balance between strategy, an adapted business model (e-intermediary, marketplaces), right processes (sales, marketing) and technology (Supply Chain Management, Customer Relationship Management). When organizations go online, they have to decide which e-business models best suit their goals. A business model is defined as the organization of product, service and information flows, and the source of revenues and benefits for suppliers and customers. The concept of the e-business model is the same but used in online presence. === Revenue model === A key component of the business model is the revenue model or profit model, which is a framework for generating revenues. It identifies which revenue source to pursue, what value to offer, how to price the value, and who pays for the value. It is a key component of a company's business model. It primarily identifies what product or service will be created in order to generate revenues and the ways in which the product or service will be sold. Without a well-defined revenue model, that is, a clear plan of how to generate revenues, new businesses will more likely struggle due to costs that they will not be able to sustain. By having a revenue model, a business can focus on a target audience, fund development plans for a product or service, establish marketing plans, begin a line of credit and raise capital. ==== E-commerce ==== E-commerce (short for "electronic commerce") is trading in products or services using computer networks, such as the Internet. Electronic commerce draws on technologies such as mobile commerce, electronic funds transfer, supply chain management, Internet marketing, online transaction processing, electronic data interchange (EDI), inventory management systems, and automated data collection. Modern electronic commerce typically uses the World Wide Web for at least one part of the transaction's life cycle, although it may also use other technologies such as e-mail. == Concerns == While much has been written of the economic advantages of Internet-enabled commerce, there is also evidence that some aspects of the internet such as maps and location-aware services may serve to reinforce economic inequality and the digital divide. Electronic commerce may be responsible for consolidation and the decline of mom-and-pop, brick and mortar businesses resulting in increases in income inequality. === Security === E-business systems naturally have greater security risks than traditional business systems, therefore it is important for e-business systems to be fully protected against these risks. A far greater number of people have access to e-businesses through the internet than would have access to a traditional business. Customers, suppliers, employees, and numerous other people use any particular e-business system daily and expect their confidential information to stay secure. Hackers are one of the great threats to the security of e-businesses. Some common security concerns for e-Businesses include keeping business and customer information private and confidential, the authenticity of data, and data integrity. Some of the methods of protecting e-business security and keeping information secure include physical security measures as well as data storage, data transmission, anti-virus software, firewalls, and encryption to list a few. ==== Privacy and confidentiality ==== Confidentiality is the extent to which businesses makes personal information available to other businesses and individuals. With any business, confidential information must remain secure and only be accessible to the intended recipient. However, this becomes even more difficult when dealing with e-businesses specifically. To keep such information secure means protecting any electronic records and files from unauthorized access, as well as ensuring safe transmission and data storage of such information. Tools such as encryption and firewalls manage this specific concern within e-business. ==== Authenticity ==== E-business transactions pose greater challenges for establishing authenticity due to the ease with which electronic information may be altered and copied. Both parties in an e-business transaction want to have the assurance that the other party is who they claim to be, especially when a customer places an order and then submits a payment electronically. One common way to ensure this is to limit access to a network or trusted parties by using a virtual private network (VPN) technology. The establishment of authenticity is even greater when a combination of techniques are used, and such techniques involve checking "something you know" (i.e. password or PIN), "something you need" (i.e. credit card), or "something you are" (i.e. digital signatures or voice recognition methods). Many times in e-business, however, "something you are" is pretty strongly verified by checking the purchaser's "something you have" (i.e. credit card) and "something you know" (i.e. card number). ==== Data integrity ==== Data integrity answers the question "Can the information be changed or corrupted in any way?" This leads to the assurance that the message received is identical to the message sent. A business needs to be confident that data is not changed in transit, whether deliberately or by accident. To help with data integrity, firewalls protect stored data against unauthorized access, while
Read more →
Conservative morphological anti-aliasing

Conservative morphological anti-aliasing (CMAA) is an antialiasing technique originally developed by Filip Strugar at Intel. CMAA is an image-based, post processing technique similar to that of morphological antialiasing. CMAA uses 4 main steps which are image analysis for color discontinuities, locally dominant edge detection, simple shape handling, and lastly symmetrical long edge shape handling. A couple of years after CMAA was introduced, Intel unveiled an updated version which they named CMAA2.
Read more →
Cloud Security Alliance

Cloud Security Alliance (CSA) is a not-for-profit organization with the mission to "promote the use of best practices for providing security assurance within cloud computing, artificial intelligence and to provide education on the uses of cloud computing to help secure all other forms of computing." The CSA has over 80,000 individual members worldwide. The CSA gained significant reputability in 2011 when the American Presidential Administration selected the CSA Summit as the venue for announcing the federal government’s cloud computing strategy. == History == The CSA was formed in December 2008 as a coalition by individuals who saw the need to provide objective enterprise user guidance on the adoption and use of cloud computing. Its initial work product, Security Guidance for Critical Areas of Focus in Cloud Computing, was put together in a Wiki-style by dozens of volunteers. In 2014, the Chairman of the Board of the CSA was Dave Cullinane, VP of Global Security and Privacy for Catalina Marketing, St. Petersburg, Florida, and former CISO for eBay. Cullinane has said, "If you have an application exposed to the Internet that will allow people to make money, it will be probed." == Profile == In 2009, the Cloud Security Alliance incorporated in Nevada as a Corporation and achieved US Federal 501(c)6 non-profit status. It is registered as a Foreign Non-Profit Corporation in Washington. == Policy maker support == The CSA works to support a number of global policy makers in their focus on cloud security initiatives including the National Institute of Standards and Technology (NIST), European Commission, Singapore Government, and other data protection authorities. In March 2012, the CSA was selected to partner with three of Europe’s largest research centers (CERN, EMBL and ESA) to launch Helix Nebula – The Science Cloud. == Size == The Cloud Security Alliance employs roughly sixty full-time and contract staff worldwide. It has several thousand active volunteers participating in research, working groups and chapters at any time. == Membership == According to CSA, they are a member-driven organization, chartered with promoting the use of best practices for providing security assurance within Cloud Computing, and providing education on the uses of Cloud Computing to help secure all other forms of computing. === Individuals === Individuals who are interested in cloud computing and have experience to assist in making it more secure receive a complimentary individual membership based on a minimum level of participation. === Chapters === The Cloud Security Alliance has a network of chapters worldwide. Chapters are separate legal entities from the Cloud Security Alliance, but operate within guidelines set down by the Cloud Security Alliance In the United States, Chapters may elect to benefit from the non-profit tax shield that the Cloud Security Alliance has. Chapters are encouraged to hold local meetings and participate in areas of research. Chapter activities are coordinated by the Cloud Security Alliance worldwide. === International scope === There are separate legal entities in Europe and Asia Pacific, called Cloud Security Alliance (Europe), a Scottish company in the United Kingdom, and Cloud Security Alliance Asia Pacific Ltd, in Singapore. Each legal entity is responsible for overseeing all Cloud Security Alliance-related activities in their respective regions. These legal entities operate under an agreement with Cloud Security Alliance that give it oversight power and have separate Boards of Directors. Both are companies Limited By Guarantee. The Managing Directors of each are members of the Executive Team of Cloud Security Alliance. == Areas of research == The Cloud Security Alliance has 25+ active working groups. Key areas of research include cloud standards, certification, education and training, guidance and tools, global reach, and driving innovation. Security Guidance for Critical Areas of Focus in Cloud Computing. Foundational best practices for securing cloud computing. Top Threats to Cloud Computing. Helps organizations make educated risk management decisions regarding their cloud adoption strategies. GRC (Governance, Risk and Compliance) Stack. A toolkit for key stakeholders to instrument and assess clouds against industry established best practices, standards and critical compliance requirements. Cloud Controls Matrix (CCM). Security controls framework for cloud provider and cloud consumers. CloudTrust Protocol. The mechanism by which cloud service consumers ask for and receive information about the elements of transparency as applied to cloud service providers. Consensus Assessments Initiative Research. Tools and processes to perform consistent measurements of cloud providers. Software Defined Perimeter. A proposed security framework that can be deployed to protect application infrastructure from network-based attacks. It will incorporate standards from organizations such as OASIS and NIST and security concepts from organizations like the U.S. DoD into an integrated framework. == Working groups and initiatives == Mobile Working Group Big Data Working Group Security as a Service Working Group Trusted Cloud Initiative CloudAudit CloudCERT CloudSIRT Cloud Metrics Security, Trust and Assurance Registry (STAR) Cloud Data Governance Turbot (business) Blockchain/Distributed Ledger
Read more →
Lucy–Hook coaddition method

The Lucy–Hook coaddition method is an image processing technique for combining sub-stepped astronomical image data onto a finer grid. The method allows the option of resolution and contrast enhancement or the choice of a conservative, re-convolved, output. Tests with very deep Hubble Space Telescope Wide Field and Planetary Camera 2 (WFPC2) imaging data of excellent quality show that these methods can be very effective and allow fine-scale features to be studied better than on the unprocessed images. The Lucy–Hook coaddition method is an extension of the standard Richardson–Lucy deconvolution iterative restoration method. For many purposes it may be more convenient to combine dithered datasets using the Drizzle method.
Read more →
Carrier cloud

In cloud computing, a carrier cloud is a class of cloud that integrates wide area networks (WAN) and other attributes of communications service providers’ carrier-grade networks to enable the deployment of highly-complex applications in the cloud. In contrast, classic cloud computing focuses on the data center and does not address the network connecting data centers and cloud users. This may result in unpredictable response times and security issues when business-critical data are transferred over the Internet. == History == The advent of virtualization technology, cost-effective computing hardware, and ubiquitous Internet connectivity have enabled the first wave of cloud services starting in the early years of the 21st century. But many businesses and other organizations hesitated to move to more demanding applications, from on-premises dedicated hardware to private or public clouds. As a response, communications service providers started in the 2010/2011 time frame to develop carrier clouds that address perceived weaknesses in existing cloud services. Cited weaknesses vary but often include possible downtime, security issues, high cost of custom software and data transfer, inflexibility of some cloud apps, poor customer and nonfulfillment of service level agreements (SLAs). == Characteristics == To enable the deployment of time-sensitive and business critical applications in the cloud, the carrier cloud is designed to match or even exceed the characteristics of on-premises deployments. Therefore, the carrier cloud is characterized by some or all of the following items: Configurable, elastic network performance: Typical cloud computing solutions use the best effort of the public Internet to connect cloud users and data centers. This approach provides instant connectivity but does not offer control over network capacities, latencies, and jitter. Carrier clouds address these gaps with content delivery networks and/or dedicated virtual private networks (VPN) at OSI layers 1 (optical wavelengths), 2 (data link layer), and 3 (network layer). These VPNs can be configured to offer the desired performance parameters and exhibit the same type of elasticity for the network that regular clouds provide for servers and storage. To achieve the requested performance parameters, such as low latency, cloud applications can be (automatically) allocated to distributed data centers that are close enough to the cloud users. Automatic resource placement: For a cloud with multiple data centers, information about both the data center and the connecting network is relevant for a decision of where to place cloud images and storage volumes. For this decision, carrier clouds can obtain relevant information about the network, e.g., using the Application-Layer Traffic Optimization (ALTO) protocol. High level of security and governance: Cloud application providers are subject to general and domain specific security, privacy, and governance requirements and regulations, such as the European Data Protection Directive and the U.S. Health Insurance Portability and Accountability Act. For added security, the wide area network of the carrier cloud can provide segregated encrypted or unencrypted network links that are not accessible from the general Internet. At the data center, the carrier cloud provides e.g. virtual private servers, management processes, logs, and documentation to fulfill security and governance rules. Location control: Fundamentally, cloud users should not be concerned with the geographic location of their cloud resources. However, privacy and other regulations may mandate that certain types of data must not be sent outside a national jurisdiction or other geographical region. Open APIs: Carrier clouds provide graphical user interfaces and Web application programming interfaces that allow cloud application providers to set up, manage, and monitor both, the data center and the WAN, of their cloud services. == Architecture == Carrier clouds encompass data centers at different network tiers and wide area networks that connect multiple data centers to each other as well as to the cloud users. Links between data centers are used for failover, overflow, backup, and geographic diversity. Carrier clouds can be set up as public, private, or hybrid clouds. The carrier cloud federates these cloud entities by using a single management system to orchestrate, manage, and monitor data center and network resources as a single system.
Read more →
Plant Nanny

Plant Nanny is a water tracker mobile application which reminds users to drink water. It was developed by Taiwanese app maker Fourdesire. The app was first released in 2013 and is available on the Apple App Store for iPhones and the Google Play Store for Android devices. == Description == Play Nanny uses a game method that allows users to turn their virtual selves into plants, which grows and thrives as the user drinks more water. The app sends occasional push notifications to remind users to drink water throughout the day. Users can choose from a wide range of plants, including cacti and carnations, and track their water intake. The app uses two resources, How to calculate how much water you should drink by Jennifer Stone (2018) and Human energy requirements by the Food and Agriculture Organization (2004), to calculate the recommended daily water intake for its users. Upon downloading the app, users are prompted to input basic personal information which is then used to calculate the recommended daily water intake and prompts them to drink the appropriate amount. == Accolades ==
Read more →
Umple

Umple is a language for both object-oriented programming and modelling with class diagrams and state diagrams. The name Umple is a portmanteau of "UML", "ample" and "Simple", indicating that it is designed to provide ample features to extend programming languages with UML capabilities. == History and philosophy == The design of Umple started in 2008 at the University of Ottawa. Umple was open-sourced and its development was moved to Google Code in early 2011 and to GitHub in 2015. Umple was developed, in part, to address certain problems observed in the modelling community. Most specifically, it was designed to bring modelling and programming into alignment, It was intended to help overcome inhibitions against modelling common in the programmer community. It was also intended to reduce some of the difficulties of model-driven development that arise from the need to use large, expensive or incomplete tools. One design objective is to enable programmers to model in a way they see as natural, by adding modelling constructs to programming languages. == Features and capabilities == Umple can be used to represent in a textual manner many UML modelling entities found in class diagrams and state diagrams. Umple can generate code for these in various programming languages. Currently Umple fully supports Java, C++ and PHP as target programming languages and has functional, but somewhat incomplete support for Ruby. Umple also incorporates various features not related to UML, such as the singleton pattern, keys, immutability, mixins and aspect-oriented code injection. The class diagram notations Umple supports includes classes, interfaces, attributes, associations, generalizations and operations. The code Umple generates for attributes include code in the constructor, 'get' methods and 'set' methods. The generated code differs considerably depending on whether the attribute has properties such as immutability, has a default value, or is part of a key. Umple generates many methods for manipulating, querying and navigating associations. It supports all combinations of UML multiplicity and enforces referential integrity. Umple supports the vast majority of UML state machine notation, including arbitrarily deep nested states, concurrent regions, actions on entry, exit and transition, plus long-lasting activities while in a state. A state machine is treated as an enumerated attribute where the value is controlled by events. Events encoded in the state machine can be methods written by the user, or else generated by the Umple compiler. Events are triggered by calling the method. An event can trigger transitions (subject to guards) in several different state machines. Since a program can be entirely written around one or more state machines, Umple enables automata-based programming. The bodies of methods are written in one of the target programming languages. The same is true for other imperative code such as state machine actions and guards, and code to be injected in an aspect-oriented manner. Such code can be injected before many of the methods in the code Umple generates, for example before or after setting or getting attributes and associations. The Umple notation for UML constructs can be embedded in any of its supported target programming languages. When this is done, Umple can be seen as a pre-processor: The Umple compiler expands the UML constructs into code of the target language. Code in a target language can be passed to the Umple compiler directly; if no Umple-specific notation is found, then the target-language code is emitted unchanged by the Umple compiler. Umple, combined with one of its target languages for imperative code, can be seen and used as a complete programming language. Umple plus Java can therefore be seen as an extension of Java. Alternatively, if imperative code and Umple-specific concepts are left out, Umple can be seen as a way of expressing a large subset of UML in a purely textual manner. Code in one of the supported programming languages can be added in the same manner as UML envisions adding action language code. == License == Umple is licensed under an MIT-style license. == Examples == Here is the classic Hello world program written in Umple (extending Java): This example looks just like Java, because Umple extends other programming languages. With the program saved in a file named HelloWorld.ump, it can be compiled from the command line: $ java -jar umple.jar HelloWorld.ump To run it: $ java HelloWorld The following is a fully executable example showing embedded Java methods and declaration of an association. The following example describes a state machine called status, with states Open, Closing, Closed, Opening and HalfOpen, and with various events that cause transitions from one state to another. class GarageDoor { status { Open { buttonOrObstacle -> Closing; } Closing { buttonOrObstacle -> Opening; reachBottom -> Closed; } Closed { buttonOrObstacle -> Opening; } Opening { buttonOrObstacle -> HalfOpen; reachTop -> Open; } HalfOpen { buttonOrObstacle -> Opening; } } } == Umple use in practice == The first version of the Umple compiler was written in Java, Antlr and Jet (Java Emitter Templates), but in a bootstrapping process, the Java code was converted to Umple following a technique called Umplification. The Antlr and Jet were also later converted to native Umple. Umple is therefore now written entirely in itself, in other words it is self-hosted and serves as its own largest test case. Umple and UmpleOnline have been used in the classroom by several instructors to teach UML and modelling. In one study it was found to help speed up the process of teaching UML, and was also found to improve the grades of students. == Tools == Umple is available as a Jar file so it can be run from the command line, and as an Eclipse plugin. There is also an online tool for Umple called UmpleOnline , which allows a developer to create an Umple system by drawing a UML class diagram, editing Umple code or both. Umple models created with UmpleOnline are stored in the cloud. Currently UmpleOnline only supports Umple programs consisting of a single input file. In addition to code, Umple's tools can generate a variety of other types of output, including user interfaces based on the Umple model.
Read more →
Spatiotemporal reservoir resampling

Spatiotemporal reservoir resampling, commonly known as ReSTIR (from "Reservoir-based SpatioTemporal Importance Resampling"), is a collection of computer graphics techniques for reusing samples during rendering. It was developed primarily to allow more realistic lighting in real-time rendering, because relatively few rays can be traced per pixel while maintaining an acceptable frame rate. It can also be used to speed up off-line path tracing. The first ReSTIR paper, published in 2020, provided algorithms for direct lighting, allowing scenes containing thousands of lights to be rendered in real time on a high-end GPU. Researchers later proposed versions for rendering indirect lighting (and more recently, motion blur and depth of field) and built up a framework of mathematical concepts and notation conventions that help analyze such algorithms. A major focus of this work is removing or reducing the bias that could be introduced when samples from other pixels or frames are reused—or selectively allowing some bias in order to speed up rendering and reduce variance (visible as "noise" in the image). Versions for path tracing apply transformations called shift mappings to samples, typically reusing parts of paths closer to the light and modifying the portion closer to the camera. ReSTIR-related papers and talks have been presented every year at the SIGGRAPH conference since 2020. One of the first games to incorporate ReSTIR into its rendering was Cyberpunk 2077. == Overview and motivation == According to Chris Wyman, one of the co-authors of the original paper, although developers commonly thought that bias was acceptable for real-time rendering, end users (e.g. gamers) are well-aware of the artifacts caused by bias and many have a negative opinion of common sample-reuse techniques such as temporal anti-aliasing (TAA), which may cause "ghosting" when the camera moves, and denoising, which causes blurring and other artifacts. ReSTIR techniques can reduce or avoid these types of bias by reusing samples of the set of possible paths taken by light to reach the camera, instead of reusing rendered pixel color values (which are typically the average of multiple samples, discarding information such as the direction of the light). While other techniques reuse samples in a generic post-processing step, ReSTIR passes can test for shadowing, and reused samples are converted into pixel color values by rendering code that takes the characteristics of different materials into account (e.g. by implementing BRDFs). However the output of ReSTIR is noisy, and a denoising pass is typically still used. Stochastic ray tracing techniques such as path tracing need to average multiple samples (produced by tracing individual rays) in order to render a visually acceptable image. When using a simple unbiased renderer based on Monte Carlo integration, halving the deviation of the result (apparent as "noise" in the image) requires multiplying the number of samples by four, meaning that a rapidly increasingly number of samples is needed to improve quality, Standard ways to mitigate this problem include importance sampling (which requires finding improved sampling distributions for specific situations), and quasi-Monte Carlo integration (which usually still requires tracing a large number of rays). ReSTIR offers a solution that multiplies the effective number of samples while tracing a fixed number of additional rays per frame. Temporal reuse multiplies the effective sample count by the number of frames rendered. Spatial reuse multiplies the effective count by the number of neighboring pixels examined. These two types of reuse can be combined, allowing spatial reuse to be applied recursively, which appears to offer an exponentially increasing effective sample count, however this is quickly limited by the size of the neighborhood used for spatial reuse. Spatial reuse is also potentially less effective near shadow and object edges, especially for objects with fine geometric detail, and temporal reuse is limited by movement of the camera and scene elements. == Variations == Many variations of ReSTIR have been proposed that generalize or improve the original technique (which builds on an earlier method called RIS), specialize it for particular types of illumination or other visual effects, or allow incorporation into rendering algorithms other than standard path tracing. Some published versions are listed below. == Algorithms == === Basic algorithm === ReSTIR uses a combination of resampled importance sampling (RIS) and weighted reservoir sampling (WRS) which the authors call streaming RIS. RIS processes samples from an initial probability distribution (e.g. a probability distribution for which a cheap sampling method exists) and generates samples in a new probability distribution (e.g. a sampling distribution that is optimal for rendering but is impractical to draw samples from directly). WRS allows this to be done while storing only a small number of samples in memory, which is especially helpful on a GPU. Information about the samples is stored in a data structure called a reservoir. WRS also allows samples from multiple reservoirs to be combined ("merged") into a single reservoir; this is crucial for sample reuse. Each pixel has a reservoir, typically containing only a single sample when ReSTIR is used for real-time rendering (some implementations use a larger number, e.g. four samples). The reservoir is typically initialized to a sample drawn using a simple method and is then updated by RIS steps and by reservoir merging, so that the pixel value produced by shading using the sample(s) currently in the reservoir, times the weight for the sample, is always an unbiased estimate of the correct pixel value. If appropriate resampling steps are used, the variance of this estimate (or some function of it, typically the luminance of the RGB color value) decreases with each step. A possible sequence of steps performed for each frame, suitable for computing unbiased direct illumination (DI) is: Perform reservoir resampling by drawing multiple light samples and using streaming RIS to choose one, using probabilities based on a target function, e.g. the luminance of the sample's contribution to the pixel. A weight is also computed for the sample. Typically, a single visibility check is performed here, after choosing a sample, setting the weight to 0 if the light is shadowed. Resampling (combined with the visibility check) ensures that the expected value of the weight times the sample brightness is the correct (unbiased) value for the pixel. (temporal reuse) For each pixel, merge the sample(s) from the previous frame into the current reservoir. Multiple importance sampling (MIS) weights are used to avoid bias due to the fact that the samples in the previous frame's reservoirs may have a different target probability distribution if the objects, lights, or camera have moved. (spatial reuse) For each pixel, choose one or more neighboring pixels and merge their samples into the current pixel's reservoir. Multiple importance sampling (MIS) weights are used to avoid bias due to the fact that the samples in each pixel's reservoir have a different target probability distribution. Because computing unbiased MIS weights requires tracing additional rays (along with other work such as evaluating BRDFs), real-time rendering often uses only a single neighboring pixel. Use the sample in each pixel's reservoir, along with its weight, to determine the color of the pixel for the current frame. Alternatively, multiple samples examined during the preceding steps may be averaged and used to shade the pixel instead (decoupled shading and sampling). For direct lighting, the initial samples used in step 1 are typically drawn by importance sampling from the set of lights in a scene. The algorithm above (from the original ReSTIR paper) draws many lower-quality light samples (e.g. 32) using a fast method, without considering visibility, and chooses one using streaming RIS. Visibility is then tested for the final chosen sample. Considering visibility for each sample drawn would require tracing 32 rays, which would make it much more expensive. The intent is to reduce the number of rays traced, relying on the sample reuse in steps 2 and 3 to make up for the loss of quality caused by rejecting many of the rays due to shadowing. A large part of the initial efforts to optimize ReSTIR (to make it run in real-time on available hardware) went into reducing the cost of randomly sampling the lights. Glossy surfaces may require a larger number of samples, and combining light sampling with BRDF sampling (using MIS) may increase quality. Step 2 (temporal reuse) is sometimes skipped for off-line rendering, and the output of multiple repetitions of initial sampling and spatial reuse is averaged instead; this helps avoids artifacts due to correlations. Step 3 (spatial reuse) may be repeated multiple times in a single frame.
Read more →
Iubenda

iubenda (stylized in lowercase; Italian pronunciation: [juˈbɛnda]) is an Italian software company that develops tools intended to support website and application compliance with data protection and privacy regulations, including consent management platforms. The company was founded in 2011 in Milan by Andrea Giannangelo. In February 2022, the company was acquired by team.blue. == History == iubenda was founded in 2011 in Milan, Italy, initially focusing on automated privacy policy generation. In 2015, the company expanded its services to include cookie compliance tools following the implementation of ePrivacy regulations in Italy. In 2018, following the introduction of the General Data Protection Regulation (GDPR) in the European Union, iubenda expanded its products to include consent management and compliance documentation services. In February 2022, iubenda was acquired by team.blue, which obtained a majority stake in the company. Italian media described the acquisition as one of the largest Italian technology startup exits in recent years. In October 2022, iubenda acquired consentmanager, a Sweden-based consent management provider. In 2025, the company acquired CookieFirst, a Netherlands-based consent management platform. In 2025, iubenda partnered with AccessiWay, a digital accessibility company owned by team.blue. == Activities == iubenda develops software tools intended to support compliance with data protection and privacy regulations. Its products include generators for privacy policies, cookie banners, terms and conditions documents, and consent management platforms. The company’s consent management platform integrates with frameworks used for online advertising and privacy compliance, including Google's Consent Mode. The platform is designed to support compliance with regulatory frameworks including the GDPR in the European Union, the UK GDPR, Brazil’s LGPD, Switzerland’s FADP and privacy laws in the United States. Its tools can be integrated with content management systems, web applications, and other digital platforms, including WordPress. The company operates internationally, with a customer base of more than 150,000 organisations, primarily in Europe and the Americas.
Read more →
FastTrack Automation Studio

FastTrack Automation Studio (formerly known as FastTrack Scripting Host), often referred to as just FastTrack, is a scripting language for Windows IT System Administrators. The product’s goal is to handle any kind of scripting that might be required to automate processes with Microsoft Windows networks. == Manufacturer == FastTrack is produced by FastTrack Software, which is headquartered in Aalborg, Denmark. The product is promoted by the manufacturer as a one-stop shop for Windows script writers and its development paradigm is “one operation = one script line”. Script writers use a purpose-built editor to create scripts, inserting script lines via menus, drag’n drop, or simply typing them in. Scripts may be used out of the box, created from scratch, imported from forums or other users, or customized from product documentation. == Types of scripts == Simple scripts include: Outlook Signatures Login scripts Backup and replication scripts Inventory and asset management Automated Windows OS installation and deployment Automated application software deployment Active Directory scripts More advanced scripts include: SCCM task sequences Citrix ICA and RDP Clients built-in Deploying applications to server farms Deploying GPO MSI files SQL Server scripts == Basic structure == Under the hood, scripts comprise commands, functions, collections, and conditions. When a script is executed these components are converted into many lines of C# code, sometimes hundreds of lines, depending on the particular script operation. Scripts can be compiled into EXE files or MSI packages and treated as standalone Windows applications. == History == FastTrack Scripting Host (FastTrack) was first developed around 2006 to ease the administration burden of IT System Administrators on Windows networks. === Product idea === The idea for the product came from founder and President of FastTrack Software, Lars Pedersen, who has a background in systems administration. Previously with Telenor, Denmark’s major telephone company, Pedersen performed various roles in systems administration, programming and web development. He also worked as a consultant and developer on several major projects at various companies in Europe. Dissatisfied from his own experiences and frustrations administering Windows networks, Pederson looked for a way to make life easier for system administrators. In particular, he wanted something that could minimize the amount of time needed each day to perform routine and mundane tasks, which was a waste of time and expertise that should have been committed to other projects. === Development === Leading a small team of developers, Pedersen developed FastTrack Scripting Host to simplify and automate the routine tasks of system administrators. The resulting product is definitely a scripting language, but it can be used intuitively like a programming language, without requiring users to learn syntax or other concepts typically associated with programming languages. === Marketing === In April 2010, FastTrack Software entered into an agreement with Binary Research International Archived 2008-10-15 at the Wayback Machine, based in the city of Milwaukee, United States to market and sell the product globally. === Awards === FSH received a Windows IT Pro Community Choice award in 2012. == Versions == The first version was produced in June 2006 and contained 51 components, which are the commands, functions, conditions and collections making up FastTrack. The following table summarizes dates and components for major releases. Companies and organizations such as NOAA, Kawasaki, and Goodyear have used and implemented the FastTrack Scripting Host. == Comparison with other scripting software == FastTrack Scripting Host Kixtart PowerShell ScriptLogic VBScript
Read more →
Color vision

Color vision (CV), a feature of visual perception, is an ability to perceive differences between light composed of different frequencies independently of light intensity. Color perception is a part of the larger visual system and is mediated by a complex process between neurons that begins with differential stimulation of different types of photoreceptors by light entering the eye. Those photoreceptors then emit outputs that are propagated through many layers of neurons ultimately leading to higher cognitive functions in the brain. Color vision is found in many animals and is mediated by similar underlying mechanisms with common types of biological molecules and a complex history of the evolution of color vision within different animal taxa. In primates, color vision may have evolved under selective pressure for a variety of visual tasks including the foraging for nutritious young leaves, ripe fruit, and flowers, as well as detecting predator camouflage and emotional states in other primates. == Wavelength == Isaac Newton discovered that white light after being split into its component colors when passed through a dispersive prism could be recombined to make white light by passing them through a different prism. The visible light spectrum ranges from about 380 to 740 nanometers. Spectral colors (colors that are produced by a narrow band of wavelengths) such as red, orange, yellow, green, cyan, blue, and violet can be found in this range. These spectral colors do not refer to a single wavelength, but rather to a set of wavelengths: red, 625–740 nm; orange, 590–625 nm; yellow, 565–590 nm; green, 500–565 nm; cyan, 485–500 nm; blue, 450–485 nm; violet, 380–450 nm. Wavelengths longer or shorter than this range are called infrared or ultraviolet, respectively. Humans cannot generally see these wavelengths, but other animals may. === Hue detection === Sufficient differences in wavelength cause a difference in the perceived hue; the just-noticeable difference in wavelength varies from about 1 nm in the blue-green and yellow wavelengths to 10 nm and more in the longer red and shorter blue wavelengths. Although the human eye can distinguish up to a few hundred hues, when those pure spectral colors are mixed together or diluted with white light, the number of distinguishable chromaticities can be much higher. In very low light levels, vision is scotopic: light is detected by rod cells of the retina. Rods are maximally sensitive to wavelengths near 500 nm and play little, if any, role in color vision. In brighter light, such as daylight, vision is photopic: light is detected by cone cells which are responsible for color vision. Cones are sensitive to a range of wavelengths, but are most sensitive to wavelengths near 555 nm. Between these regions, mesopic vision comes into play and both rods and cones provide signals to the retinal ganglion cells. The shift in color perception from dim light to daylight gives rise to differences known as the Purkinje effect. The perception of "white" is formed by the entire spectrum of visible light, or by mixing colors of just a few wavelengths in animals with few types of color receptors. In humans, white light can be perceived by combining wavelengths such as red, green, and blue, or just a pair of complementary colors such as blue and yellow. === Non-spectral colors === There are a variety of colors in addition to spectral colors and their hues. These include grayscale colors, shades of colors obtained by mixing grayscale colors with spectral colors, violet-red colors, impossible colors, and metallic colors. Grayscale colors include white, gray, and black. Rods contain rhodopsin, which reacts to light intensity, providing grayscale coloring. Shades include colors such as pink or brown. Pink is obtained from mixing red and white. Brown may be obtained from mixing orange with gray or black. Navy is obtained from mixing blue and black. Violet-red colors include hues and shades of magenta. The light spectrum is a line on which violet is one end and the other is red, and yet we see hues of purple that connect those two colors. Impossible colors are a combination of cone responses that cannot be naturally produced. For example, medium cones cannot be activated completely on their own; if they were, we would see a 'hyper-green' color. == Dimensionality == Color vision is categorized foremost according to the dimensionality of the color gamut, which is defined by the number of primaries required to represent the color vision. This is generally equal to the number of photopsins expressed: a correlation that holds for vertebrates but not invertebrates. The common vertebrate ancestor possessed four photopsins (expressed in cones) plus rhodopsin (expressed in rods), so was tetrachromatic. However, many vertebrate lineages have lost one or many photopsin genes, leading to lower-dimension color vision. The dimensions of color vision range from 1-dimensional and up: == Physiology of color perception == Perception of color begins with specialized retinal cells known as cone cells. Cone cells contain different forms of opsin – a pigment protein – that have different spectral sensitivities. Humans contain three types, resulting in trichromatic color vision. Each individual cone contains pigments composed of opsin apoprotein covalently linked to a light-absorbing prosthetic group: either 11-cis-hydroretinal or, more rarely, 11-cis-dehydroretinal. The cones are conventionally labeled according to the ordering of the wavelengths of the peaks of their spectral sensitivities: short (S), medium (M), and long (L) cone types. These three types do not correspond well to particular colors as we know them. Rather, the perception of color is achieved by a complex process that starts with the differential output of these cells in the retina and which is finalized in the visual cortex and associative areas of the brain. For example, while the L cones have been referred to simply as red receptors, microspectrophotometry has shown that their peak sensitivity is in the greenish-yellow region of the spectrum. Similarly, the S cones and M cones do not directly correspond to blue and green, although they are often described as such. The RGB color model, therefore, is a convenient means for representing color but is not directly based on the types of cones in the human eye. The peak response of human cone cells varies, even among individuals with typical color vision; in some non-human species this polymorphic variation is even greater, and it may well be adaptive. === Theories === Two complementary theories of color vision are the trichromatic theory and the opponent process theory. The trichromatic theory, or Young–Helmholtz theory, proposed in the 19th century by Thomas Young and Hermann von Helmholtz, posits three types of cones preferentially sensitive to blue, green, and red, respectively. Others have suggested that the trichromatic theory is not specifically a theory of color vision but a theory of receptors for all vision, including color but not specific or limited to it. Equally, it has been suggested that the relationship between the phenomenal opponency described by Ewald Hering and the physiological opponent processes are not straightforward (see below), making of physiological opponency a mechanism that is relevant to the whole of vision, and not just to color vision alone. Hering proposed the opponent process theory in 1872. It states that the visual system interprets color in an antagonistic way: red vs. green, blue vs. yellow, black vs. white. Both theories are generally accepted as valid, describing different stages in visual physiology, visualized in the adjacent diagram. Green–magenta and blue–yellow are scales with mutually exclusive boundaries. In the same way that there cannot exist a "slightly negative" positive number, a single eye cannot perceive a bluish-yellow or a reddish-green. Although these two theories are both currently widely accepted theories, past and more recent work has led to criticism of the opponent process theory, stemming from a number of what are presented as discrepancies in the standard opponent process theory. For example, the phenomenon of an after-image of complementary color can be induced by fatiguing the cells responsible for color perception, by staring at a vibrant color for a length of time, and then looking at a white surface. This phenomenon of complementary colors shows that cyan, rather than green, is the complement of red, and that magenta, rather than red, is the complement of green. It therefore also shows that the reddish-green color supposed to be impossible by opponent process theory is actually the color yellow. Although this phenomenon is more readily explained by the trichromatic theory, explanations for the discrepancy may include alterations to the opponent process theory, such as redefining the opponent colors as red vs. cyan, to reflect this effect. Despite such criticis
Read more →
BeHafizh

BeHafizh is a mobile application to assist in the effort to memorize Qur'anic verses. The software runs on the Android operating system. This application was made by a team from Gadjah Mada University (UGM) consisting of Farid Amin Ridwanto, Rian Adam Rajagede and Alfian Try Putranto in order to participate in the National Student Musabaqoh Tilawatil Quran (MTQ) held at University of Indonesia (UI) on 1- August 8, 2015. This application then won a gold medal in the branch of Computer Application Design in the competition. == Features == === Audio Player === Audio player, paragraph can be played repeatedly, with pause, and can be done on a certain range of Quranic verses. === Memorization Test === Memorization testing continues users to improve their memorization. Memorization Recorders improves user's ability to recite Quran. === Colour indicators === === Achievements === === Reminders ===
Read more →
Cloudflare

Cloudflare, Inc., is an American technology company headquartered in San Francisco, California, that provides a range of internet services, including content delivery network (CDN) services, cloud cybersecurity, DDoS mitigation, and ICANN-accredited domain registration. The company's services act primarily as a reverse proxy between website visitors and a customer's hosting provider, improving performance and protecting against malicious traffic. Cloudflare was founded in 2009 by Matthew Prince, Lee Holloway, and Michelle Zatlyn. The company went public on the New York Stock Exchange in 2019 under the ticker symbol NET. Cloudflare has since expanded its offerings to include edge computing through its Workers platform, a public DNS resolver (1.1.1.1), and a VPN-like service known as WARP. In recent years, the company has integrated artificial intelligence into its infrastructure, acquiring companies such as Replicate and launching tools to manage AI bots and scrapers. According to W3Techs, Cloudflare is used by approximately 21.3% of all websites on the Internet as of January 2026. The company has been the subject of controversy regarding its policy of content neutrality. While Cloudflare executives have historically advocated for remaining a neutral infrastructure provider, the company has terminated services for specific high-profile websites associated with hate speech and violence, including The Daily Stormer, 8chan, and Kiwi Farms, following significant public pressure. Cloudflare has also faced criticism and litigation regarding copyright infringement by websites using its services, notably losing a lawsuit against Japanese publishers in 2025. The company experienced significant global outages in late 2025 which disrupted services for major platforms internationally. == History == Cloudflare was founded on July 26, 2009, by Matthew Prince, Lee Holloway, and Michelle Zatlyn. Prince and Holloway had previously collaborated on Project Honey Pot, a product of Unspam Technologies that partly inspired the basis of Cloudflare. In 2009, the company was venture-capital funded. On August 15, 2019, Cloudflare submitted its S-1 filing for an initial public offering on the New York Stock Exchange under the stock ticker NET. It opened for public trading on September 13, 2019, at $15 per share. According to the company, the name 'Cloudflare' was chosen, over the initial 'WebWall', because it best described what they were trying to do: build a "firewall in the cloud." In 2020, Cloudflare co-founder and COO Michelle Zatlyn was named president. Cloudflare has acquired web-services and security companies, including StopTheHacker (February 2014), CryptoSeal (June 2014), Eager Platform Co. (December 2016), Neumob (November 2017), S2 Systems (January 2020), Linc (December 2020), Zaraz (December 2021), Vectrix (February 2022), Area 1 Security (February 2022), Nefeli Networks (March 2024), BastionZero (May 2024), and Kivera (October 2024). Replicate (November 2025), and Human Native (January 2026). Since at least 2017, Cloudflare has used a wall of lava lamps at its San Francisco headquarters as a source of randomness for encryption keys, alongside double pendulums at its London offices and a Geiger counter at its Singapore offices. The lava lamp installation implements the Lavarand method, where a camera transforms the unpredictable shapes of the "lava" blobs into a digital image. In Q4 2022, Cloudflare provided paid services to 162,086 customers. In October 2024, Cloudflare won a lawsuit against patent troll Sable Networks. Sable paid Cloudflare $225,000, granted it a royalty-free license to its patent portfolio, and dedicated its patents to the public by abandoning its patent rights. In November 2025, it was announced Cloudflare had agreed to acquire Replicate, a San Francisco–based platform that enables software developers to run, fine-tune, and deploy open-source machine-learning models via an API without managing infrastructure. In January 2026, Cloudflare released an analysis regarding BGP routing leaks observed from the Venezuelan state-owned ISP CANTV (AS8048), which occurred on January 2 coincides with the arrest of Nicolás Maduro. While some security researchers had speculated that the outages were linked to U.S. cyber operations, Cloudflare's data indicated that the anomalies were consistent with a pattern of "insufficient routing export and import policies" by the ISP rather than malicious external interference. In January 2026, Cloudflare acquired Human Native, an AI data marketplace that brokers transactions between developers and content creators, for an undisclosed amount. On January 16, 2026, Cloudflare acquired The Astro Technology Company, the developers behind the open-source web framework Astro. In May 2026, Cloudflare announced the elimination of approximately 1,100 positions, around 20 percent of its workforce, in a restructuring the company attributed to the rapid adoption of artificial intelligence tools. The announcement coincided with the company's first-quarter 2026 earnings, which reported a record $639.8 million in quarterly revenue, a 34 percent year-over-year increase. CEO Matthew Prince stated the cuts were not driven by performance concerns but reflected roles made obsolete by AI, and that Cloudflare expected to employ more people by the end of 2027 than at any point during 2026. == Products == Cloudflare provides network and security products for consumers and businesses, utilizing edge computing, reverse proxies for web traffic, data center interconnects, and a content distribution network to serve content across its network of servers. It supports transport layer protocols TCP, UDP, QUIC, and many application layer protocols such as DNS over HTTPS, SMTP, and HTTP/2 with support for HTTP/2 Server Push. As of 2023, Cloudflare handles an average of 45 million HTTP requests per second. As of 2024, Cloudflare servers are powered by AMD EPYC 9684X processors. Cloudflare also provides analysis and reports on large-scale outages, including Verizon's October 2024 outage. === Artificial intelligence === In 2023, Cloudflare launched "Workers AI", a framework allowing for use of Nvidia GPU's within Cloudflare's network. In 2024, Cloudflare launched a tool that prevents bots from scraping websites. To build automatic bot detector models, the company analyzed "AI" bots and crawler traffic. The company also launched an "AI" assistant to generate charts based on queries by leveraging "Workers AI". Cloudflare announced plans in September 2024 to launch a marketplace where website owners can sell "AI" model providers access to scrape their site's content. In March 2025, Cloudflare announced a new feature called "AI Labyrinth", which combats unauthorized "AI" data scraping by serving fake "AI"-generated content to LLM bots. In July, the company rolled out a permission-based setting to allow websites to automatically block online bots from scraping data and content. Cloudflare released AutoRAG into beta in 2025. AutoRAG (retrieval augmented generation) creates a vector database of a website's unstructured content to identify relationships between concepts. It is part of an initiative with Microsoft, alongside their NLWeb standard, to make websites easier for people and automated systems to query. Cloudflare and GoDaddy partnered in April 2026 to enable AI Crawl Control features on GoDaddy hosted websites. This would allow site owners to decide how AI bot crawlers interact with their content. === DDoS mitigation === Cloudflare provides free and paid DDoS mitigation services that protect customers from distributed denial of service (DDoS) attacks. Cloudflare received media attention in June 2011 for providing DDoS mitigation for the website of LulzSec, a black hat hacking group. In March 2013, The Spamhaus Project was targeted by a DDoS attack that Cloudflare reported exceeded 300 gigabits per second (Gbit/s). Patrick Gilmore, of Akamai, stated that at the time it was "the largest publicly announced DDoS attack in the history of the Internet". While trying to defend Spamhaus against the DDoS attacks, Cloudflare ended up being attacked as well; Google and other companies eventually came to Spamhaus' defense and helped it to absorb the unprecedented amount of attack traffic. In 2014, Cloudflare began providing free DDoS mitigation for artists, activists, journalists, and human rights groups under the name "Project Galileo". In 2017, it extended the service to electoral infrastructure and political campaigns under the name "Athenian Project". By 2025, more than 2,900 users and organizations were participating in Project Galileo, including 31 US states. In February 2014, Cloudflare claimed to have mitigated an NTP reflection attack against an unnamed European customer, which it stated peaked at 400 Gbit/s. In November 2014, it reported a 500 Gbit/s DDoS attack in Hong Kong. In July 2021, the company claimed to have absorbed a DDoS atta
Read more →
Zhura

Zhura ( ZUR-ə) is a free, web-based screenwriting software application for writing and formatting screenplays to the film industry standard, as well as other formats. Zhura allows users to collaborate on scripts in public or private groups and uses Creative Commons Licensing for all work in the public workspace. On March 29, 2010, Zhura announced its merger with Scripped. Scripped's CEO, Sunil Rajaraman, remains the company's Chief Executive Officer (CEO) as of 2022. The Zhura CEO was Eric MacDonald, a former Cascade Communications engineer. Scripped later closed on April 1, 2015 after a catastrophic, irrecoverable data loss. == Script editor == Screenplay Template – The script editor provides a built-in screenplay template which formats the document to a standard for scripts as recommended by the AMPAS. The screenplay document is composed of seven elements: scene, action, character, dialogue, parenthetical, transition, and shot (see image). Each element has a specific style to which the script editor conforms as you type.Script Formats – Other major script formats for stage play, sitcom, audio drama and comic book are also supported as well as the ability to switch between them.Auto-Complete – Characters, scene headings and custom transitions are “remembered” as they are written and “recalled” with tab-completion when a writer starts a new character, scene heading or transition, respectively.Multiple Editors – With a collaborative editing model comparable to Google Docs, two or more users can edit the same script simultaneously, regardless of having a different operating system or web browser. Import/Export – A screenplay written in another program can be imported into the script editor and automatically conformed to the screenplay template. The closer the original script has adhered to the standard format, the better it will appear when imported. Supported import/export formats include Text (.txt) Word (.doc) Rich Text (.rtf) and OpenDocument (.odt). Scripts can also be exported as a PDF file with additional options.Tracking Changes – Similar to the “tracking” feature in Microsoft Word, a user can review all changes made to a script in the revision history as well as highlight the contributions of each writer. Offline Mode – The Google Gears-based offline functionality is in the process of being updated and is not available for new subscribers, according to the company founders. == Community == Scripped supports typical social networking features such as discussion boards, comments, user profiles, public and private writing groups, internal web mail and instant messaging within the script editor. There is also the option to share scripts with others outside of Scripped by making scripts externally viewable. Scripped is made up entirely of user-generated scripts that other users can share, critique and edit, offering creative support to a community of writers. == Licensing of user-created work == There are three types of work-spaces on Scripped (personal, group and public) with unique copyright and licensing management for the work created in each area. Any work a user originates may be moved from the personal area to a public or group area at any time. Once another user edits a script, however, it cannot be moved into the originator’s personal area. Personal Workspace – Any script created or video uploaded in the user’s personal workspace remains copyrighted to that user. Until the user moves that script or video from their personal area into a group or public area, no other user shares a copyright or license to that work. Private Group Workspace – The copyright to any script created or video uploaded in a private group workspace is allocated by the individual members of the group, however they see fit. Public Workspace – Any script created or video uploaded in the public workspace is assigned a Creative Commons license by the originator of that work. The originator of a script may select one of four Creative Commons licenses before introducing that script to the public. The selection of the license is determined by what the author wants to allow others to do with the work. Below is a list of Creative Commons licenses available for all scripts and videos in the public workspace. Share Alike (BY-SA) This license lets others remix, tweak, and build upon your work even for commercial reasons, as long as they credit the original user and license their new creations under the identical terms. This license is often compared to open source software licenses. All new works based on the original user's will carry the same license, so any derivatives will also allow commercial use. No Derivatives (BY-ND) This license allows for redistribution, commercial and non-commercial, as long as it is passed along unchanged and in whole, with credit to the original user. Non-Commercial, No Derivatives (BY-NC-ND) This license is the most restrictive of the four licenses, allowing redistribution. This license is often called the "free advertising" license because it allows others to download the original user work and share them with others as long as they mention the original user and link back to them, but they can't change them in any way or use them commercially. Non-Commercial, Share Alike (BY-NC-SA) This license lets others remix, tweak, and build upon the original user's work non-commercially, as long as they credit the original user and license their new creations under the identical terms. Others can download and redistribute the original user's work just like the BY-NC-ND license, but they can also translate, make remixes, and produce new stories based on the original user's work. All new work based on the original user's work will carry the same license, so any derivatives will also be non-commercial in nature. == Events == In April 2008, Zhura partnered with Improv Asylum, a comedy troupe in Boston, Massachusetts to produce a live sketch comedy show called "You Wrote It, Live" entirely written by the public on Zhura. Another show was produced in June.
Read more →