AI Video Tools

Explore the best AI Video Tools — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.

• 

  Thermal attack

  A thermal attack (aka thermal imaging attack) is an approach that exploits heat traces to uncover the entered credentials. These attacks rely on the phenomenon of heat transfer from one object to another. During authentication, heat transfers from the users' hands to the surface they are interacting with, leaving heat traces behind that can be analyzed using thermal cameras that operate in the far-infrared spectrum. These traces can be recovered and used to reconstruct the passwords. In some cases, the attack can be successful even 30 seconds after the user has authenticated. Thermal attacks can be performed after the victim had authenticated, alleviating the need for in-situ observation attacks (e.g., shoulder surfing attacks) that can be affected by hand occlusions. While smudge attacks can reveal the order of entries of graphical passwords, such as the Android Lock Patterns, thermal attacks can reveal the order of entries even in the case of PINs or alphanumeric passwords. The reason thermal attacks leak information about the order of entry is because keys and buttons that the user touches first lose heat over time, while recently touched ones maintain the heat signature for a longer time. This results in distinguishable heat patterns that can tell the attacker which entry was entered first. Thermal attacks were shown to be effective against plastic keypads, such as the ones used to enter credit card's PINs in supermarkets and restaurants, and on handheld mobile devices such as smartphones and tablets. In their paper published at the Conference on Human Factors in Computing Systems (CHI 2017), Abdelrahman et al. showed that the attack is feasible on today's smartphones. They also proposed some ways to mitigate the attack, such as swiping randomly on the screen to distort the heat traces, or forcing maximum CPU usage for a few seconds. Thermal attacks can also infer passwords from heat traces on keyboards. Researchers at the University of Glasgow showed that attackers who use AI methods can be more effective in performing thermal attacks. Their study presents a new tool called ThermoSecure and evaluates it in two user studies. The results show that ThermoSecure can successfully attack passwords with an average accuracy of 92% to 55%, depending on the length of the password. The effectiveness of thermal attacks also depends on typing behavior and the material of the keycaps. ABS keycaps, which retain heat traces longer, are more vulnerable to thermal attacks. The study also discusses ways to protect against thermal attacks and presents seven potential mitigation approaches. Dr Khamis, who led the development of the technology with Norah Alotaibi and John Williamson, said with thermal imaging cameras more affordable than ever and machine learning becoming more accessible, it was "very likely that people around the world are developing systems along similar lines to ThermoSecure in order to steal passwords". == Thermal Attack Mitigation == === Simple and Practical Measures === One basic and effective way to mitigate thermal attacks is to deliberately create heat noise over the input interface, such as a keypad or keyboard, after entering a password. For instance, placing one's palm over the entire interface for a few seconds after use can obscure the thermal pattern left by the fingers, making it much more difficult for an unauthorized user to interpret the heat traces. === Range of Proposed Strategies === In addition to simple methods, researchers have developed a spectrum of mitigation strategies to counter thermal attacks. These strategies encompass 15 different approaches including: Use of Biometrics: Replacing traditional pin codes or passwords with biometric authentication, such as fingerprint recognition or facial recognition, eliminates the issue of residual heat on keypads. Heating the Interface: Implementing technology to slightly warm up the keypad can effectively neutralize the heat traces left by fingers, preventing thermal cameras from capturing the pattern. Randomizing Key Layouts: Employing dynamic key layouts that change positions every time the interface is used, making it impossible to correlate heat patterns with static input positions. === Technological Intervention on Thermal Cameras === Another avenue for mitigation is to address the issue at the source by modifying thermal cameras. Proposals have been made to develop thermal cameras that can automatically detect vulnerable interfaces such as keyboards or keypads. When these interfaces are detected within the camera's field of view, the camera would be programmed to prevent the user from recording images of them. This solution, however, would require widespread adoption by thermal camera manufacturers. Additionally, the approach is particularly viable for thermal cameras connected to a computing device, such as a smartphone, which can process the images in real time. Many affordable thermal cameras are standalone and do not have connectivity or processing capabilities. However, thermal cameras designed for connection to mobile devices can utilize the smartphone's processing power, making this mitigation approach feasible for such devices.

  Read more →
• 

  Nuclear electronics

  Nuclear electronics is a subfield of electronics concerned with the design and use of high-speed electronic systems for nuclear physics and elementary particle physics research, and for industrial and medical use. Essential elements of such systems include fast detectors for charged particles, discriminators for separating them by energy, counters for counting the pulses produced by individual particles, fast logic circuits (including coincidence and veto gates), for identification of particular types of complex particle events, and pulse height analyzers (PHAs) for sorting and counting gamma rays or particle interactions by energy, for spectral analysis. == Elementary components == Some of the essential components that make up the elements of a nuclear electronic analysis system include: Detectors Bias voltage supplies Preamplifiers Discriminators Coincidence and veto logic gates Counters Pulse height analyzers These elements were originally developed and built in the laboratories of the scientists doing the pioneering work in the field, but are nowadays designed, developed, and manufactured by a variety of specialized vendors: EG&G Ortec Oxford Instruments Stanford Research Systems Tennelec CAEN

  Read more →
• 

  Digital data

  Digital data or digital information, in information theory and information systems, is data or information represented as a string of discrete symbols, each of which can take on one of only a finite number of values from some alphabet, such as letters or digits. An example is a text document, which consists of a string of alphanumeric characters. The most common form of digital data in modern information systems is binary data, which is represented by a string of binary digits (bits) each of which can have one of two values, either 0 or 1. Digital data can be contrasted with analog data, which is represented by a value from a continuous range of real numbers. Analog data is transmitted by an analog signal, which not only takes on continuous values but can vary continuously with time, a continuous real-valued function of time. An example is the air pressure variation in a sound wave. Data requires interpretation to become information. In modern (post-1960) computer systems, all data is digital. The word digital comes from the same source as the words digit and digitus (the Latin word for finger), as fingers are often used for counting. Mathematician George Stibitz of Bell Telephone Laboratories used the word digital in reference to the fast electric pulses emitted by a device designed to aim and fire anti-aircraft guns in 1942. The term is most commonly used in computing and electronics, especially where real-world information is converted to binary numeric form as in digital audio and digital photography. == Symbol to digital conversion == Since symbols (for example, alphanumeric characters) are not continuous, representing symbols digitally is rather simpler than conversion of continuous or analog information to digital. Instead of sampling and quantization as in analog-to-digital conversion, such techniques as polling and encoding are used. A symbol input device usually consists of a group of switches that are polled at regular intervals to see which switches are switched. Data will be lost if, within a single polling interval, two switches are pressed, or a switch is pressed, released, and pressed again. This polling can be done by a specialized processor in the device to prevent burdening the main CPU. When a new symbol has been entered, the device typically sends an interrupt, in a specialized format, so that the CPU can read it. For devices with only a few switches (such as the buttons on a joystick), the status of each can be encoded as bits (usually 0 for released and 1 for pressed) in a single word. This is useful when combinations of key presses are meaningful, and is sometimes used for passing the status of modifier keys on a keyboard (such as shift and control). But it does not scale to support more keys than the number of bits in a single byte or word. Devices with many switches (such as a computer keyboard) usually arrange these switches in a scan matrix, with the individual switches on the intersections of x and y lines. When a switch is pressed, it connects the corresponding x and y lines together. Polling (often called scanning in this case) is done by activating each x line in sequence and detecting which y lines then have a signal, thus which keys are pressed. When the keyboard processor detects that a key has changed state, it sends a signal to the CPU indicating the scan code of the key and its new state. The symbol is then encoded or converted into a number based on the status of modifier keys and the desired character encoding. A custom encoding can be used for a specific application with no loss of data. However, using a standard encoding such as ASCII is problematic if a symbol such as 'ß' needs to be converted but is not in the standard. It is estimated that in the year 1986, less than 1% of the world's technological capacity to store information was digital and in 2007 it was already 94%. The year 2002 is assumed to be the year when humankind was able to store more information in digital than in analog format (the "beginning of the digital age"). == States == Digital data come in these three states: data at rest, data in transit, and data in use. The confidentiality, integrity, and availability have to be managed during the entire lifecycle from 'birth' to the destruction of the data. === Data at rest === Data at rest in information technology means data that is housed physically on computer data storage in any digital form (e.g. cloud storage, file hosting services, databases, data warehouses, spreadsheets, archives, tapes, off-site or cloud backups, mobile devices etc.). Data at rest includes both structured and unstructured data. This type of data is subject to threats from hackers and other malicious threats to gain access to the data digitally or physical theft of the data storage media. To prevent this data from being accessed, modified or stolen, organizations will often employ security protection measures such as password protection, data encryption, or a combination of both. The security options used for this type of data are broadly referred to as data-at-rest protection (DARP). Definitions include: "...all data in computer storage while excluding data that is traversing a network or temporarily residing in computer memory to be read or updated." "...all data in storage but excludes any data that frequently traverses the network or that which resides in temporary memory. Data at rest includes but is not limited to archived data, data which is not accessed or changed frequently, files stored on hard drives, USB thumb drives, files stored on backup tape and disks, and also files stored off-site or on a storage area network (SAN)." While it is generally accepted that archive data (i.e. which never changes), regardless of its storage medium, is data at rest and active data subject to constant or frequent change is data in use. “Inactive data” could be taken to mean data which may change, but infrequently. The imprecise nature of terms such as “constant” and “frequent” means that some stored data cannot be comprehensively defined as either data at rest or in use. These definitions could be taken to assume that Data at Rest is a superset of data in use; however, data in use, subject to frequent change, has distinct processing requirements from data at rest, whether completely static or subject to occasional change. ==== Security ==== Because of its nature data at rest is of increasing concern to businesses, government agencies and other institutions. Mobile devices are often subject to specific security protocols to protect data at rest from unauthorized access when lost or stolen and there is an increasing recognition that database management systems and file servers should also be considered as at risk; the longer data is left unused in storage, the more likely it might be retrieved by unauthorized individuals outside the network. Data encryption, which prevents data visibility in the event of its unauthorized access or theft, is commonly used to protect data in motion and increasingly promoted for protecting data at rest. The encryption of data at rest should only include strong encryption methods such as AES or RSA. Encrypted data should remain encrypted when access controls such as usernames and password fail. Increasing encryption on multiple levels is recommended. Cryptography can be implemented on the database housing the data and on the physical storage where the databases are stored. Data encryption keys should be updated on a regular basis. Encryption keys should be stored separately from the data. Encryption also enables crypto-shredding at the end of the data or hardware lifecycle. Periodic auditing of sensitive data should be part of policy and should occur on scheduled occurrences. Finally, only store the minimum possible amount of sensitive data. Tokenization is a non-mathematical approach to protecting data at rest that replaces sensitive data with non-sensitive substitutes, referred to as tokens, which have no extrinsic or exploitable meaning or value. This process does not alter the type or length of data, which means it can be processed by legacy systems such as databases that may be sensitive to data length and type. Tokens require significantly less computational resources to process and less storage space in databases than traditionally encrypted data. This is achieved by keeping specific data fully or partially visible for processing and analytics while sensitive information is kept hidden. Lower processing and storage requirements makes tokenization an ideal method of securing data at rest in systems that manage large volumes of data. A further method of preventing unwanted access to data at rest is the use of data federation especially when data is distributed globally (e.g. in off-shore archives). An example of this would be a European organisation which stores its archived data off-site in the US. Under the terms of the USA PATRIOT Act the American authorities can demand

  Read more →
• 

  Digital studio

  A digital studio provides both a technology-equipped space and technological/rhetorical support to students (commonly at a university) working individually or in groups on a variety of digital projects, such as designing a website, developing an electronic portfolio for a class, creating a blog, making edits, selecting images for a visual essay, or writing a script for a podcast. == History/theory == === Overview === Digital Studios are places with different names but similar objectives. They have risen in response to the need for resources dedicated to improving students' interactions with digital technologies for rhetorical ends. Digital Studios have often been theoretically and administratively linked to writing centers, which are sites where students can seek assistance with their text-based projects. The academic term that has been used for this kind of site (i.e. a writing center with a focus on digital and new media) is multiliteracy center. Besides having a multimodal focus, Digital Studios also make a departure from writing center model in allowing students the freedom to work in the Studio without one-on-one interaction with a writing tutor. === The rise of technology === ==== Computer literacy in popular culture ==== As early as 1983, computer literacy was being hailed in The New York Times as the "new goal in schools." As computer technology became more ubiquitous, and the World Wide Web became more popular and accessible, and as the teaching of computer skills became official US policy with the enactment of the "Technology Literacy Challenge" by the Clinton Administration in 1996, educators across disciplines began to investigate with renewed vigor the role of computer technology in curriculum as both a means and an end. ==== Scholarly interest in 'multiliteracies' ==== The same year that President Clinton initiated the "Technology Literacy Challenge", the New London Group (NLG) issued a call for scholars of literacy pedagogy to account for the burgeoning variety of text forms associated with information and multimedia technologies. This includes understanding and competent control of representational forms that are becoming increasingly significant in the overall communications environment, such as visual images and their relationship to the written word – for instance, visual design in desktop publishing or the interface of visual and linguistic meaning in multimedia. This account for new text forms, combined with a similar account for "increasingly globalized societies," is called 'multiliteracies' by the NLG. ==== Technological literacy in rhetoric and composition ==== Two years later, during the 1998 CCCC Chair's Address, Cynthia Selfe (who founded the peer-reviewed journal Computers and Composition in 1983) addressed professionals in the field of Rhetoric and Composition with an objective similar to that of the NLG, arguing that as a field, composition scholars had "paid technology issues precious little focused attention over the years." She called this lack of attention "dangerously shortsighted." What was needed, Selfe claimed, was for teachers to "pay attention" to "how technology is now inextricably linked with literacy and literacy education in this country." In a way, Selfe's call marked the beginning of a new scholarly interest in what Selfe called "critical technological literacy": Composition teachers, language arts teachers, and other literacy specialists need to recognize that the relevance of technology in the English studies disciplines is not simply a matter of helping students work effectively with communication software and hardware, but, rather, also a matter of helping them to understand and to be able to assess – to pay attention to – the social, economic, and pedagogical implications of new communication technologies and technological initiatives that affect their lives. Scholars who took up this call included Barbara Blakely Duffelmeyer, who conducted studies involving the incorporation of "critical computer literacy" (an adaptation of Selfe's term) into first-year composition. ==== Communications across media, inside and outside school ==== The years following Selfe's address saw more rapid advancements in mobile technologies, social media, and Web 2.0, creating even more new venues of composing for teachers to pay attention to. In her own CCCC Chair's Address in 2004, Kathleen Blake Yancey cited these new venues in her argument as a "new curriculum for the 21st century," one that would bring "together the writing outside of school and that of inside." Such a curriculum, she said: is located in a new vocabulary, a new set of practices, and a new set of outcomes; it will focus our research in new and provocative ways; it has as its goal the creation of thoughtful, informed, technologically adept writing publics. A professor at Clemson at the time of her speech, Yancey also argued for the creation of an undergraduate major in composition and rhetoric. She soon moved to Florida State University, where she helped to establish a new major in line with the one she argued for at CCCC called Editing, Writing, and Media (EWM). As teachers and administrators across the country looked to incorporate more digital technology into their curriculum, the need for spaces for digital composition and for support with the innumerable digital composing platforms became apparent. A Digital Studio is one such space. === Link with writing centers === With the need for support for students who would engage with digital writing and multimedia projects, professionals involved with work in writing centers began to draw comparisons between their traditional work — assisting students with alphabetic texts on the page — and a new kind of work: assisting students with their multimedia projects on the screen. John Trimbur predicted in 2000: My guess is that writing centers will more and more define themselves as multiliteracy centers. Many are already doing so – tutoring oral presentations, adding online tutorials, offering workshops in evaluating web sources, and being more conscious of document design. To my mind, new digital literacies will increasingly be incorporated into writing centers not just as sources of information or delivery systems for tutoring but as productive arts in their own right, and writing center work will, if anything, become more rhetorical in paying attention to the practices and effects of design in written and visual communication — more product-oriented and perhaps less like the composing conferences of the process movement. Later, just months before Yancey delivered her CCCC Chair's Address, Michael Pemberton, writing in the Writing Center Journal, asked: As we enter an era when electronic publishing and computer-mediated discourse are the norm, an era when new literary genres and new forms of communication emerge on, seemingly, a weekly basis, we must ask ourselves whether writing centers should continue to dwell exclusively in the linear, non-linked world of the printed page or whether they should plan to redefine themselves – and retrain themselves – to take residence in the emerging world of multimedia, hyperlinked, digital documents. To put it plainly, should we be preparing tutors to conference with students about hypertexts? Pemberton also surveyed (by his account) the forty-year history of how "writing centers [have] viewed new technologies," observing that "the relationship between writing centers and computer technology has been, overall, only a cordial one." Pemberton's article is evidence of the continuing discussion among writing center professionals about the need for support for students' digital creations, support which they saw as analogous to work in writing centers. In 2010, a collection edited by David Sheridan and James Inman, Multiliteracy Centers: Writing Center Work, New Media, and Multimodal Rhetoric, was published. Many of the chapters therein cite the above Trimbur and Pemberton quotes as they work to explain the exigence for the collection, the instances in which multiliteracy centers have been established (the founding of the Clemson Class of 1941 Studio for Student Communication is the subject of two chapters), and both theoretical and practical analyses of potential futures of such work. === 'Studio' vs. 'Center:' A break from the model === The conflation of digital studios and writing centers into multiliteracy centers is helpful in some respects, for example, administratively the two may be managed in similar ways and staffed by the same people. In other respects, it has been said that it is better to separate them into two distinct kinds of facilities. The very choice of naming a "writing center" or "digital studio" by either (or another) title, for instance, ought (according to some) to be informed by what kinds of student-activities are expected to take place there. A writing center is a place for individual students to seek help from individual writing

  Read more →
• 

  Test data management

  Test data management (TDM) is a process in software testing concerned with the creation, preparation, and control of data used for testing software systems. It involves supplying datasets required to execute test cases and verifying system behaviour under defined conditions. Test data management is an integral part of the software development lifecycle (SDLC) and is utilized in both manual and automated testing processes. It is applied in environments that use continuous integration and DevOps practices, where test execution requires consistent and repeatable data conditions. == Overview == Test data management includes the generation, selection, and preparation of data for testing purposes, as well as its distribution across test environments. It also involves controlling data versions and ensuring that datasets correspond to specific test scenarios. In many cases, production data is adapted for testing through techniques such as masking or subsetting to reduce size and remove sensitive content. Test data management ensures that test cases are executed with relevant, consistent, and readily available data. This reduces variability in test results and supports reproducibility across test cycles. == Importance == The role of test data management has expanded with the growth of complex, data-driven systems and regulatory requirements governing data usage. Testing often depends on data that reflects real-world conditions, but direct use of production data may introduce security and privacy risks. As a result, organizations apply methods such as data masking and anonymization to meet compliance requirements, including those set by the California Privacy Rights Act (CPRA) and Europe’s General Data Protection Regulation (GDPR). Inadequate control of test data can lead to incomplete test coverage, unreliable test results, or delays in testing processes due to unavailable or inconsistent datasets. == Techniques and tools == Test data management leverages various techniques for preparing and controlling data used in testing. These include the generation of synthetic data, the extraction of subsets from production datasets, and the modification of data to remove or obscure sensitive information. A key technical requirement in these processes is maintaining referential integrity, or ensuring that relationships between data entities remain consistent across different tables and systems after masking or subsetting. Data virtualization is also used to provide access to datasets without full replication. These methods may be implemented using software tools that automate data preparation, masking, and distribution.

  Read more →
• 

  ISO/IEC 11801

  International standard ISO/IEC 11801 Information technology — Generic cabling for customer premises specifies general-purpose telecommunication cabling systems (structured cabling) that are suitable for a wide range of applications (analog and ISDN telephony, various data communication standards, building control systems, factory automation). It is published by ISO/IEC JTC 1/SC 25/WG 3 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It covers both balanced copper cabling and optical fibre cabling. The standard was designed for use within commercial premises that may consist of either a single building or of multiple buildings on a campus. It was optimized for premises that span up to 3 km, up to 1 km2 office space, with between 50 and 50,000 persons, but can also be applied for installations outside this range. A major revision was released in November 2017, unifying requirements for commercial, home and industrial networks. == Classes and categories == The standard defines several link/channel classes and cabling categories of twisted-pair copper interconnects, which differ in the maximum frequency for which a certain channel performance is required: Class A: Up to 100 kHz using Category 1 cable and connectors Class B: Up to 1 MHz using Category 2 cable and connectors Class C: Up to 16 MHz using Category 3 cable and connectors Class D: Up to 100 MHz using Category 5e cable and connectors Class E: Up to 250 MHz using Category 6 cable and connectors Class EA: Up to 500 MHz using category 6A cable and connectors (Amendments 1 and 2 to ISO/IEC 11801, 2nd Ed.) Class F: Up to 600 MHz using Category 7 cable and connectors Class FA: Up to 1 GHz (1000 MHz) using Category 7A cable and connectors (Amendments 1 and 2 to ISO/IEC 11801, 2nd Ed.) Class BCT-B: Up to 1 GHz (1000 MHz) using with coaxial cabling for BCT applications. (ISO/IEC 11801-1, Edition 1.0 2017-11) Class I: Up to 2 GHz (2000 MHz) using Category 8.1 cable and connectors (ISO/IEC 11801-1, Edition 1.0 2017-11) Class II: Up to 2 GHz (2000 MHz) using Category 8.2 cable and connectors (ISO/IEC 11801-1, Edition 1.0 2017-11) The standard link impedance is 100 Ω. (The older 1995 version of the standard also permitted 120 Ω and 150 Ω in Classes A−C, but this was removed from the 2002 edition.) The standard defines several classes of optical fiber interconnect: OM1: Multimode, 62.5 μm core; minimum modal bandwidth of 200 MHz·km at 850 nm OM2: Multimode, 50 μm core; minimum modal bandwidth of 500 MHz·km at 850 nm OM3: Multimode, 50 μm core; minimum modal bandwidth of 2000 MHz·km at 850 nm OM4: Multimode, 50 μm core; minimum modal bandwidth of 4700 MHz·km at 850 nm OM5: Multimode, 50 μm core; minimum modal bandwidth of 4700 MHz·km at 850 nm and 2470 MHz·km at 953 nm OS1: Single-mode, maximum attenuation 1 dB/km at 1310 and 1550 nm OS1a: Single-mode, maximum attenuation 1 dB/km at 1310, 1383, and 1550 nm OS2: Single-mode, maximum attenuation 0.4 dB/km at 1310, 1383, and 1550 nm Grandfathered === OM5 === OM5 fiber is designed for wideband applications using SWDM multiplexing of 4–16 carriers (40G=4λ×10G, 100G=4λ×25G, 400G=4×4λ×25G) in the 850–953 nm range. === Category 7 === Class F channel and Category 7 cable are backward compatible with Class D/Category 5e and Class E/Category 6. Class F features even stricter specifications for crosstalk and system noise than Class E. To achieve this, shielding was added for individual wire pairs and the cable as a whole. Unshielded cables rely on the quality of the twists to protect from EMI. This involves a tight twist and carefully controlled design. Cables with individual shielding per pair such as Category 7 rely mostly on the shield and therefore have pairs with longer twists. The Category 7 cable standard was ratified in 2002, and primarily introduced to support 10 gigabit Ethernet over 100 m of copper cabling. Like the earlier standards, it contains four twisted copper wire pairs rated for transmission frequencies of up to 600 MHz. However, in 2006, Category 6A was ratified for Ethernet to allow 10 Gbit/s while still using the conventional 8P8C connector. Care is required to avoid signal degradation by mixing cable and connectors not designed for that use, however similar. Most manufacturers of active equipment and network cards have chosen to support the 8P8C for their 10 gigabit Ethernet products on copper and not GG45, ARJ45, or TERA connectors as Class F would have originally called for. Therefore, the Category 6 specification was revised to Category 6A to permit this use; products therefore require a Class EA channel (ie, Cat 6A). As of 2019, some equipment has been introduced which has connectors supporting the Class F (Category 7) channel. Note, however, that Category 7 is not recognized by the TIA/EIA. === Category 7A === Class FA (Class F Augmented) channels and Category 7A cables, introduced by ISO 11801 Edition 2 Amendment 2 (2010), are defined at frequencies up to 1000 MHz. The intent of the Class FA was to possibly support the future 40 gigabit Ethernet: 40GBASE-T. Simulation results have shown that 40 gigabit Ethernet may be possible at 50 meters and 100 gigabit Ethernet at 15 meters. In 2007, researchers at Pennsylvania State University predicted that either 32 nm or 22 nm circuits would allow for 100 gigabit Ethernet at 100 meters. However, in 2016, the IEEE 802.3bq working group ratified the amendment 3 which defines 25GBASE-T and 40GBASE-T on Category 8 cabling specified to 2000 MHz. The Class FA therefore does not support 40G Ethernet. As of 2025, there is no equipment that has connectors supporting the Class FA (Category 7A) channel. Category 7A is not recognized in TIA/EIA. === Category 8 === Category 8 was ratified by the TR43 working group under ANSI/TIA 568-C.2-1. It is defined up to 2000 MHz and only for distances up to 30 m or 36 m, depending on the patch cords used. ISO/IEC JTC 1/SC 25/WG 3 developed the equivalent standard ISO/IEC 11801-1:2017/COR 1:2018, with two options: Class I channel (Category 8.1 cable): minimum cable design U/FTP or F/UTP, fully backward compatible and interoperable with Class EA (Category 6A) using 8P8C connectors; Class II channel (Category 8.2 cable): F/FTP or S/FTP minimum, interoperable with Class FA (Category 7A) using TERA or GG45. == Abbreviations for twisted pairs == Annex E, Acronyms for balanced cables, provides a system to specify the exact construction for both unshielded and shielded balanced twisted pair cables. It uses three letters—U for unshielded, S for braided shielding, and F for foil shielding—to form a two-part abbreviation in the form of xx/xTP, where the first part specifies the type of overall cable shielding, and the second part specifies shielding for individual cable elements. Common cable types include U/UTP (unshielded cable); U/FTP (individual pair shielding without the overall screen); F/UTP, S/UTP, or SF/UTP (overall screen without individual shielding); and F/FTP, S/FTP, or SF/FTP (overall screen with individual foil shielding). == 2017 edition == In November 2017, a new edition was released by ISO/IEC JTC 1/SC 25 "Interconnection of information technology equipment" subcommittee. It is a major revision of the standard which has unified several prior standards for commercial, home, and industrial networks, as well as data centers, and defines requirements for generic cabling and distributed building networks. The new series of standards replaces the former 11801 standard and includes six parts: == Versions == ISO/IEC 11801:1995 (Ed. 1) ISO/IEC 11801:2000 (Ed. 1.1) – Edition 1, Amendment 1 ISO/IEC 11801:2002 (Ed. 2) ISO/IEC 11801:2008 (Ed. 2.1) – Edition 2, Amendment 1 ISO/IEC 11801:2010 (Ed. 2.2) – Edition 2, Amendment 2 ISO/IEC 11801-1:2017, -1:2017/Cor 1:2018, -2:2017, -3:2017, -3:2017/Amd 1:2021, -3:2017/Cor 1:2018, -4:2017, -4:2017/Cor 1:2018, -5:2017, -5:2017/Cor 1:2018, -6:2017, -6:2017/Cor 1:2018 (As of September 2023, this set is current.)

  Read more →
• 

  Electronic submission

  Electronic submission refers to the submission of a document by electronic means: that is, via e-mail or a web form on the Internet, or on an electronic medium such as a compact disc, a hard disk or a USB flash drive. Traditionally, the term "manuscript" referred to anything that was explicitly "written by hand". However, in popular usage and especially in the context of computers and the internet, the term "manuscript" may even refer to documents (text or otherwise) typed out or prepared on typewriters and computers and can be extended to digital photographs and videos, and online surveys too. In other words, any manuscript prepared and submitted online can be considered to be an electronic submission. == History and early usage == There is no concrete data indicating when and by whom were electronic submissions used for the first time. However, research based universities in several countries have been encouraging the collection of course assignments and projects in the form of electronic submissions for almost a decade now. Several governments and organizations are also switching to electronic submissions for the collection of research papers, grant applications and government application forms. == Types of electronic submissions == Since modern computers can store and process information and data in virtually any format and with the Internet allowing easy transfer of this data, the number of scenarios in which submissions can be collected electronically has increased exponentially in the last few years. Some of these scenarios are described below. In most of these scenarios, submissions were collected on hard paper until the Information Technology revolution occurred. === Academic Submissions === Teachers, professors and teaching assistants often collect course assignments and projects electronically. Electronic submissions are usually collected using a web-based system which more often than not also helps in the management of submissions collected and stored on it. (Explained By Henny L, University of Lethbridge, AB, Canada) === Research Papers === In call-for-paper or academic conferences, prospective presenters are usually asked to submit a short abstract or a full paper on their presentation or research work electronically, which is reviewed before being accepted for the conference. === Proposals for Grants === Several grant-giving organizations like the NSA, W3C, NIA, NIH etc. require grant seekers to submit a proposal which if accepted result in the desired grants. A majority of these proposals are now submitted electronically on systems that also help in the managing and tracking the proposals submitted. === Articles for Publication === Magazines, newspapers and other publishing houses have begun accepting electronic submissions for articles from various sources - both internal (by journalists and writers hired by them) as well as external (by users and popular readers). The submitted articles are stored on a server hosted by the publication house or by a third-party Archived 2019-10-13 at the Wayback Machine vendor and are usually evaluated before being given a green signal. === Contests and Competition Entries === Almost every kind of contest or competition requires participants to submit an entry in a format described by the organizers of the contest. If the contest is an Internet-based one, then the entries or nominations for the contest are collected electronically using e-mail or other electronic means depending on feasibility and the choice of the organizers. === Government Applications === The governments of several countries are turning to electronic submission of applications and forms for various government procedures. Electronic submissions allow easier management of the applications and forms submitted. === Legal documents === Many legal documents may be submitted to the courts electronically. In England and Wales, the Civil Procedure Rules include a suitable "document exchange" as an acceptable "method of service". Case law in employment law cases has established that where a claim is submitted electronically, a prudent legal adviser should "check that it has been received and there must be systems in place for doing that". === Resumés and CVs === It has become commonplace for job-seekers to submit soft copies (electronic versions) of their resumés and CVs to recruiting agencies and online job portals. This is usually done over the Internet using e-mail or a pre-hosted web-based system. == Submission management systems == The art and science of collecting and managing electronic submissions is called Submission Management. Certain software vendors have begun developing submission management systems to assist in the collection, tracking and management of complex submission processes realized electronically. Most of these systems are web based and accessible from any device with a browser and an Internet connection. However, a majority of these systems are application specific and cannot be applied to all submission management scenarios. == Resistance to electronic submissions == Despite the easier management and tracking of electronic submissions compared to their paper-based counterparts, widespread adoption and use of electronic submissions and systems for managing them has been hampered by several facts, which include but are not limited to: Inconvenience while drawing figures, diagrams and equations on a computer Resistance to change and adoption of new technologies Lack of or limited access to the Internet.

  Read more →
• 

  History of RISC OS

  RISC OS, the computer operating system developed by Acorn Computers for their ARM-based Acorn Archimedes range, was originally released in 1987 as Arthur 0.20, and soon followed by Arthur 0.30, and Arthur 1.20. The next version, Arthur 2, became RISC OS 2 and was completed in September 1988 and made available in April 1989. RISC OS 3 was released with the very earliest version of the A5000 in 1991 and contained a series of new features. By 1996 RISC OS had been shipped on over 500,000 systems. RISC OS 4 was released by RISCOS Ltd (ROL) in July 1999, based on the continued development of OS 3.8. ROL had in March 1999 licensed the rights to RISC OS from Element 14 (the renamed Acorn) and eventually from the new owner, Pace Micro Technology. According to the company, over 6,400 copies of OS 4.02 on ROM were sold up until production was ceased in mid-2005. RISC OS Select was launched in May 2001 by ROL. This is a subscription scheme allowing users access to the latest OS updates. These upgrades are released as soft-loadable ROM images, separate to the ROM where the boot OS is stored, and are loaded at boot time. Select 1 was shipped in May 2002, with Select 2 following in November 2002 and the final release of Select 3 in June 2004. ROL released the ROM based OS 4.39 the same month, dubbed RISC OS Adjust as a play on the RISC OS GUI convention of calling the three mouse buttons 'Select', 'Menu' and 'Adjust'. ROL sold its 500th Adjust ROM in early 2006. RISC OS 5 was released in October 2002 on Castle Technology's Acorn clone Iyonix PC. OS 5 is a separate evolution based upon the NCOS work done by Pace for set-top boxes. In October 2006, Castle announced a source sharing license plan for elements of OS 5. This Shared Source Initiative (SSI) is managed by RISC OS Open Ltd (ROOL). RISC OS 5 has since been released under a fully free and open source Apache 2.0 license, while the older no longer maintained RISC OS 6 has not. RISC OS Six was also announced in October 2006 by ROL. This is the next generation of their stream of the operating system. The first product to be launched under the name was the continuation of the Select scheme, Select 4. A beta-version of OS 6, Preview 1 (Select 4i1), was available in 2007 as a free download to all subscribers to the Select scheme, while in April 2009 the final release of Select 5 was shipped. The latest release of RISC OS from ROL is Select 6i1, shipped in December 2009. == Arthur == The OS was designed in the United Kingdom by Acorn for the 32-bit ARM based Acorn Archimedes, and released in its first version in 1987, as the Arthur operating system. The first public release of the OS was Arthur 1.20 in June 1987. It was bundled with a desktop graphical user interface (GUI), which mostly comprises assembly language software modules, and the Desktop module itself being written in BBC BASIC. It features a colour-scheme typically described as "technicolor". The graphical desktop runs on top of a command-line driven operating system which owes much to Acorn's earlier MOS operating system for its BBC Micro range of 8-bit microcomputers. Arthur, as originally conceived, was intended to deliver similar functionality to the operating system for the BBC Master series of computers, MOS, as a reaction to the fact that a more advanced operating system research project (ARX) would not be ready in time for the Archimedes. The Arthur project team, led by Paul Fellows, was given just five months to develop it entirely from the ground up—with the directive "just make it like the BBC micro". It was intended as a stop-gap until the operating system which Acorn had under development (ARX) could be completed. However, the latter was delayed time and again, and was eventually dropped when it became apparent that the Arthur development could be extended to have a window manager and full desktop environment. Also, it was small enough to run on the first 512K machines with only a floppy disc, whereas ARX required 4 megabytes and a hard drive. The OS development was carried out using a prototype ARM-based system connected to a BBC computer, before moving onto the prototype Acorn Archimedes the A500. Arthur was not a multitasking operating system, but offered support for adding application-level cooperative multitasking. No other version of the operating system was released externally, but internally the development of the desktop and window management continued, with the addition of a cooperative multitasking system, implemented by Neil Raine, which used the memory management hardware to swap-out one task, and bring in another between call-and-return from the Wimp_Poll call that applications were obliged to make to get messages under the desktop. Reminiscent of a similar technique employed by MultiFinder on the Apple Macintosh, this transformed a single-application-at-a-time system into one that could operate a full multi-tasking desktop. This transformation took place at version 1.6 though it was not made public until released, with the name change from Arthur to RISC OS, as version 2.0. Most software made for Arthur 1.2 can be run under RISC OS 2 and later because, underneath the desktop, the original Arthur OS core, API interfaces and modular structures remain as the heart of all versions. (A few titles will not work, however, because they used undocumented features, side effects or in a few cases APIs that became deprecated). In 2011, Business Insider listed Arthur as one of ten "operating systems that time forgot". == RISC OS 2 == RISC OS was a rapid development of Arthur 1.2 after the failure of the ARX project. Given growing dissatisfaction with various bugs and limitations with Arthur, testing of what was then known as Arthur 2 was apparently ongoing during 1988 with selected software houses. At this stage, Computer Concepts, who had been prolific developers for the BBC Micro and who had begun software development for the Archimedes, had already initiated a rival operating system project, Impulse, to support their own applications (including the desktop publishing application that would eventually become Impression), stating that Arthur did not meet the "hundreds of requirements" involved including "true multi-tasking". Such an operating system was to be offered free of charge with the planned application packages, but with the release of RISC OS and Computer Concepts acknowledging that RISC OS "overcomes the old problems with Arthur", the applications were to be able to run under either RISC OS or Impulse. Impression was eventually released as a RISC OS application. Ultimately, Arthur 2 was renamed to RISC OS, and was first sold as RISC OS 2.00 in April 1989. The operating system implements co-operative multitasking with some limitations but is not multi-threaded. It uses the ADFS file system for both floppy and hard disc access. It ran from a 512 KB set of ROMs. The WIMP interface offers all the standard features and fixes many of the bugs that had hindered Arthur. It lacks virtual memory and extensive memory protection (applications are protected from each other, but many functions have to be implemented as 'modules' which have full access to the memory). At the time of release, the main advantage of the OS was its ROM; it booted very quickly and while it was easy to crash, it was impossible to permanently break the OS from software. Its high performance was due to much of the system being written in ARM assembly language. The OS was designed with users in mind, rather than OS designers. It is organised as a relatively small kernel which defines a standard software interface to which extension modules are required to conform. Much of the system's functionality is implemented in modules coded in the ROM, though these can be supplanted by more evolved versions loaded into RAM. Among the kernel facilities are a general mechanism, named the callback handler, which allows a supervisor module to perform process multiplexing. This facility is used by a module forming part of the standard editor program to provide a terminal emulator window for console applications. The same approach made it possible for advanced users to implement modules giving RISC OS the ability to do pre-emptive multitasking. A slightly updated version, RISC OS 2.01, was released later to support the ARM3 processor, larger memory capacities, and the VGA and SVGA modes provided by the Acorn Archimedes 540 and Acorn R225/R260. == RISC OS 3 == RISC OS 3 introduced a number of new features, including multitasking Filer operations, applications and fonts in ROM, no limit on number of open windows, ability to move windows off screen, safe shutdown, the Pinboard, grouping of icon bar icons, up to 128 tasks, native ability to read MS-DOS format discs and use named hard discs. Improved configuration was also included, by way of multiple windows to change the settings. RISC OS 3.00 was released with the very earliest version of the A5000 in 1991; it is almo

  Read more →
• 

  International Clinical Trials Registry Platform

  The International Clinical Trials Registry Platform (ICTRP) is a platform for the registration of clinical trials operated by the World Health Organization. The ICTRP combines data from multiple cooperating clinical trials registries to generate a global view of clinical trials worldwide, with a search portal that allows access to the entire dataset. It requires a minimum standard set of database fields, the WHO Trial Registration Data Set, to be present for a trial to be registered. All entries are given a Universal Trial Number (UTN) that identifies them uniquely. The organization has sought to assist various national governments in establishing their own clinical trials databases. It combines data from the following primary registries and data providers: Australian New Zealand Clinical Trials Registry (ANZCTR) Brazilian Clinical Trials Registry (ReBec) Chinese Clinical Trial Registry (ChiCTR) Clinical Research Information Service (CRiS), Republic of Korea ClinicalTrials.gov Clinical Trials Information System (CTIS), European Medicines Agency Clinical Trials Registry - India (CTRI) Cuban Public Registry of Clinical Trials (RPCEC) EU Clinical Trials Register (EU-CTR) German Clinical Trials Register (DRKS) Iranian Registry of Clinical Trials (IRCT) ISRCTN (UK) International Traditional Medicine Clinical Trial Registry (ITMCTR) Japan Registry of Clinical Trials (jRCT) Japan Primary Registries Network (JPRN) Lebanese Clinical Trials Registry (LBCTR) Overview of Medical Research in the Netherlands (OMON) Thai Clinical Trials Registry (TCTR) Pan African Clinical Trial Registry (PACTR) Peruvian Clinical Trial Registry (REPEC) Sri Lanka Clinical Trials Registry (SLCTR)

  Read more →
• 

  Microelectronics

  Microelectronics is a subfield of electronics. As the name suggests, microelectronics relates to the study and manufacture (or microfabrication) of very small electronic designs and components. Usually, but not always, this means micrometre-scale or smaller. These devices are typically made from semiconductor materials. Many components of a normal electronic design are available in a microelectronic equivalent. These include transistors, capacitors, inductors, resistors, diodes and (naturally) insulators and conductors can all be found in microelectronic devices. Unique wiring techniques such as wire bonding are also often used in microelectronics because of the unusually small size of the components, leads and pads. This technique requires specialized equipment and is expensive. Digital integrated circuits (ICs) consist of billions of transistors, resistors, diodes, and capacitors. Analog circuits commonly contain resistors and capacitors as well. Inductors are used in some high frequency analog circuits, but tend to occupy larger chip area due to their lower reactance at low frequencies. Gyrators can replace them in many applications. As techniques have improved, the scale of microelectronic components has continued to decrease. At smaller scales, the relative impact of intrinsic circuit properties, such as unintended interactions between components or their parts, may become more significant. These are called parasitic effects, and the goal of the microelectronics design engineer is to find ways to compensate for or to minimize these effects, while delivering smaller, faster, and cheaper devices. Today, microelectronics design is largely aided by electronic design automation (EDA) software.

  Read more →
• 

  Social media use by the Islamic State

  The Islamic State is widely known for its posting of disturbing content, such as beheading videos, on the internet. This propaganda is disseminated through websites and many social media platforms such as Twitter, Facebook, Telegram, and YouTube. By utilizing social media, the organization has garnered a strong following and successfully recruited tens of thousands of followers from around the world. In response to its successful use of social media, many websites and social media platforms have banned accounts and removed content promoting the Islamic State from their platforms. == Background == The Islamic State is a Jihadist militant group and a former unrecognised proto-state. The group sophisticatedly utilizes social media as a tool for spreading its message and for international recruitment. == Target audience == IS targets a variety of different groups both in the Middle East and Western Countries. There are a wide variety of motives for why fighters may be prompted to join IS. Researchers from Quantum cite nine attributes characteristic of a fighter looking to join IS: status seeking, identity seeking, revenge, redemption, thrill, ideology, justice, and death. The standard IS recruit, both from the Middle East and Western countries, is relatively young. The average age of IS fighters is around 26 years old, with 86% of recruits being male. Middle Eastern recruits come from economically disadvantaged backgrounds in Northern Iraq. Recent destruction in the Iraq War and Syrian Civil War has created hatred of Western Powers in the region. By 2025, researchers identified a significant shift toward targeting minors and adolescents, a phenomenon dubbed the "Alt-Jihad." This younger demographic is targeted not through theological arguments, but through a "victimhood-revenge" narrative that blends extremist ideology with pop-culture aesthetics in gaming environments like Roblox and Minecraft. In 2024 alone, 42 minors were arrested in Europe for involvement in IS-related plotting or propaganda. Western recruits are often second or third-generation immigrants. Computer scientists Zeeshan ul-hassan Usmani also found that the majority of the Western recruits do not feel "at home" in their home country. As a result, these fighters often have desires to go abroad and escape conditions in their home country. In addition to recruitment, IS's social media presence is also meant to intimidate and spread terror around the world. IS's posting of beheadings and other execution videos primarily target the Western world. == Content and messages == IS produces propaganda videos that range from video executions to full-length documentaries. The videos have a high production quality and incorporate montages, slow motion scenes, and are often accompanied by a short dialogue. IS has a dedicated team of over 100 media insurgents dedicated to recording these videos. While the group previously relied on glossy magazines like Dabiq, post-territorial strategies have shifted focus to the weekly newsletter Al-Naba. Unlike previous publications designed for recruitment, Al-Naba serves as a "central pillar" of the group's media strategy, focusing on bureaucratic reporting and military statistics to project a narrative of endurance and maintain internal cohesion among dispersed fighters. The IS executions typically consist of beheadings or mass shootings in retaliation to western intervention in IS territory. The particular videos that IS often post include executions of "enemies of the Caliphate," which often consist of westerners or Jordanian nationals. Most infamously, an executioner nicknamed Jihadi John was seen in many of these videos prior to his death in 2015. Jihadi John is notorious for executing many US, UK, and Japanese citizens such as Steven Sotloff, David Haines, and Alan Henning. In many of the videos and materials produced by IS, there is the theme of inclusion and brotherhood. Additionally, the videos also focus on three main messages: Convey narrative of global war and ultimate victory Radicalize populations globally Encourage international lone state actor and small cell attacks in support of IS These messages can be seen throughout all content produced by the Islamic State such as war documentaries, execution videos, and Rumiyah (magazine). == Social media usage == From 2013 to 2014, the organization primarily used mainstream platforms such as Twitter, Facebook, and YouTube. In 2014, these large social media platforms removed IS content. Since then, IS has chosen to utilize social media platforms that either protect their content or allow for content to quickly be reposted. These platforms of choice are Telegram, Justpaste.it, and Surespot, until the latter's shutdown in 2022. By 2025, the group had further diversified into decentralized platforms like Rocket.Chat and TamTam to evade moderation. IS also implements marketing initiatives like “Jihadist Follow Friday,” which encourages users to follow new IS-related accounts each Friday. This specific hashtag mirrors commonly used hashtags such as #motivation monday or #throwbackthursday. To augment their online presence and popularity, the organization encourages their followers to use a plethora of Arabic hashtags, which translate to #theFridayofSupportingISIS, and #CalamityWillBefalltheUS. This allows them to gain followers each week while promoting their community and message on a weekly basis. === Twitter === During 2014, there were an estimated 46,000 to 90,000 Twitter accounts that advocated for IS or were run by supporters of the group. In 2015, Twitter reported that it banned 125,000 IS sympathetic accounts. In 2016, it published an update of 325,000 deleted accounts. Though many accounts have been suspended, IS supporters often create new accounts. Twitter defines those who recreate accounts as “resurgents” and explains that these are often difficult accounts to remove completely, since they tend to pop back up in alternate forms. It is estimated that approximately 20% of all IS affiliated Twitter accounts can be traced back to fake accounts created by the same user. Many of these accounts are traced back to the “Baqiya family,” which is an online network of thousands of IS followers. Many of these accounts are active during important IS military victories. During the IS march on Mosul, there were about 42,000 tweets on Twitter supporting the invasion. === Telegram === During 2014, IS became very active on Telegram after many major social media platforms banned IS content and sympathetic accounts. Telegram is an encrypted messaging application. The platform by nature is created as an end-to-end user encryption platform. Further, it also has special features such as the self-destruct timer which erase all evidence and messages. The app has a user data protection policy because violating this policy could potentially damage the app’s brand of customer privacy. Government agencies have been unable to break Telegram's encryption technology. On Telegram, IS often uses the hashtag #KhilafahNews to attract their users. Telegram is used by IS to plan social media campaigns on alternate platforms. The organization also uses Telegram as an anchor platform to connect with their user base when their other accounts are banned on Twitter and Facebook. On 28 February 2016 a video was uploaded threatening to expose the najaasah and shoot the hesitates. Produced by Ibn-Altayb and distributed by Al-Hayat, the video shows footage of Bruxelles attacks and the victims. In July 2017, Telegram came under scrutiny from the media and news media outlets. It has been documented that IS gunmen have used this app to maintain contact with IS leaders in Raqqa days before terror attacks in Turkey, Berlin, and St. Petersburg. Despite concerns from Western media, there has been little to no action taken against IS accounts on Telegram. In April 2019 a video was uploaded in which they urged lone wolves to attempt to attack during the Holy Week in Sevilla and Málaga. In Sevilla, a jihadist who intended to perform a lone wolf attack was arrested. === TikTok === In October 2019, it was reported that IS recruitment content was discovered on TikTok. Approximately two dozen accounts were subsequently shut down in response. By 2025, TikTok had evolved into a "low-threshold" gateway for extremist recruitment, characterized by researchers as part of a "Virtual Caliphate Complex." Nearly 93 unofficial IS support groups, known as "feeder groups," were found to be repackaging official IS content into short-form videos with pink hearts, catchy music, and internet memes to evade detection and appeal to the "TikTok generation." This content often promotes a "victimhood-revenge" narrative rather than complex theology, specifically designed to radicalize minors. === Justpaste.it === Justpaste.it, an anonymous photo and text sharing website, has also been utilized heavily. With the option to lock images, the website allows anonymous

  Read more →
• 

  Virtual Print Fee

  Virtual Print Fee (VPF) is a subsidy paid by a film distributor towards the purchase of digital cinema projection equipment for use by a film exhibitor in the presentation of first release motion pictures. The subsidy is paid in the form of a fee per booking of a movie, intended to match the savings that occurs by not shipping a film print. The model is designed to help redistribute the savings realized by studios when using digital distribution instead of film print distribution and is intended to vanish when the transition phase is over when the vast majority of cinemas screens are equipped. == History == The first public demonstration of digital projection for cinema took place at ShoWest in 1999, and it was readily apparent that the technology was further ahead than the business model. Early technology presentations attempted to claim that the technology would pay for itself through new revenues generated by new forms of content. But exhibitors knew their audience, and could see that digital projection was only a replacement technology, creating new financial liabilities, and not new revenue. It wasn’t until the rollout of digital 3-D years later in 2005 that digital projection demonstrated that it could be used to generate additional revenue. The economics were challenging. Film projectors and platters cost in the neighborhood of US$30,000, while early digital projectors cost up to US$150,000. Further, film projectors had a lifetime of 30 years with relatively small annual expenditures in maintenance and replacement parts. On the other hand, exhibitors felt they would be lucky to get 10 years of service from a digital projector, after which there would have to be a refresh in capital expenditure. Meanwhile, distributors would realize significant savings by eliminating the high cost of film prints with corresponding shipping costs, and instead distributing digital files either by satellite or hard drive. The Virtual Print Fee was designed to better balance savings and expenditures for both exhibitors and distributors. It is intended to primarily assist in the replacement of film projectors, and not assist in the purchase of new projection equipment for new construction. To give confidence to financial institutions that digital cinema technology was stable and worthy of investment, Digital Cinema Initiatives was created in 2002, resulting in the release of the first version of the DCI Digital Cinema System Specification in 2005. The DCI Specification continues to be the core specification for digital cinema, establishing the baseline technology and system requirements for which studios will release digital movies. The first set of VPF agreements executed with four major studios were announced by Christie/AIX in November 2005. Christie/AIX at that time was a subsidiary of Access Integrated Technology, now renamed Cinedigm Digital Cinema Corp. The agreements were for the rollout of digital cinema technology to 4000 screens. Since that time, numerous other Digital Cinema Deployment Agreements have been executed around the world, allowing exhibitors in nearly every territory to benefit from VPF subsidies in the conversion from film projection to digital projection.

  Read more →
• 

  Manifold regularization

  In machine learning, manifold regularization is a technique for using the shape of a dataset to constrain the functions that should be learned on that dataset. In many machine learning problems, the data to be learned do not cover the entire input space. For example, a facial recognition system may not need to classify any possible image, but only the subset of images that contain faces. The technique of manifold learning assumes that the relevant subset of data comes from a manifold, a mathematical structure with useful properties. The technique also assumes that the function to be learned is smooth: data with different labels are not likely to be close together, and so the labeling function should not change quickly in areas where there are likely to be many data points. Because of this assumption, a manifold regularization algorithm can use unlabeled data to inform where the learned function is allowed to change quickly and where it is not, using an extension of the technique of Tikhonov regularization. Manifold regularization algorithms can extend supervised learning algorithms in semi-supervised learning and transductive learning settings, where unlabeled data are available. The technique has been used for applications including medical imaging, geographical imaging, and object recognition. == Manifold regularizer == === Motivation === Manifold regularization is a type of regularization, a family of techniques that reduces overfitting and ensures that a problem is well-posed by penalizing complex solutions. In particular, manifold regularization extends the technique of Tikhonov regularization as applied to Reproducing kernel Hilbert spaces (RKHSs). Under standard Tikhonov regularization on RKHSs, a learning algorithm attempts to learn a function f {\displaystyle f} from among a hypothesis space of functions H {\displaystyle {\mathcal {H}}} . The hypothesis space is an RKHS, meaning that it is associated with a kernel K {\displaystyle K} , and so every candidate function f {\displaystyle f} has a norm ‖ f ‖ K {\displaystyle \left\|f\right\|_{K}} , which represents the complexity of the candidate function in the hypothesis space. When the algorithm considers a candidate function, it takes its norm into account in order to penalize complex functions. Formally, given a set of labeled training data ( x 1 , y 1 ) , … , ( x ℓ , y ℓ ) {\displaystyle (x_{1},y_{1}),\ldots ,(x_{\ell },y_{\ell })} with x i ∈ X , y i ∈ Y {\displaystyle x_{i}\in X,y_{i}\in Y} and a loss function V {\displaystyle V} , a learning algorithm using Tikhonov regularization will attempt to solve the expression arg min f ∈ H 1 ℓ ∑ i = 1 ℓ V ( f ( x i ) , y i ) + γ ‖ f ‖ K 2 {\displaystyle {\underset {f\in {\mathcal {H}}}{\arg \!\min }}{\frac {1}{\ell }}\sum _{i=1}^{\ell }V(f(x_{i}),y_{i})+\gamma \left\|f\right\|_{K}^{2}} where γ {\displaystyle \gamma } is a hyperparameter that controls how much the algorithm will prefer simpler functions over functions that fit the data better. Manifold regularization adds a second regularization term, the intrinsic regularizer, to the ambient regularizer used in standard Tikhonov regularization. Under the manifold assumption in machine learning, the data in question do not come from the entire input space X {\displaystyle X} , but instead from a nonlinear manifold M ⊂ X {\displaystyle M\subset X} . The geometry of this manifold, the intrinsic space, is used to determine the regularization norm. === Laplacian norm === There are many possible choices for the intrinsic regularizer ‖ f ‖ I {\displaystyle \left\|f\right\|_{I}} . Many natural choices involve the gradient on the manifold ∇ M {\displaystyle \nabla _{M}} , which can provide a measure of how smooth a target function is. A smooth function should change slowly where the input data are dense; that is, the gradient ∇ M f ( x ) {\displaystyle \nabla _{M}f(x)} should be small where the marginal probability density P X ( x ) {\displaystyle {\mathcal {P}}_{X}(x)} , the probability density of a randomly drawn data point appearing at x {\displaystyle x} , is large. This gives one appropriate choice for the intrinsic regularizer: ‖ f ‖ I 2 = ∫ x ∈ M ‖ ∇ M f ( x ) ‖ 2 d P X ( x ) {\displaystyle \left\|f\right\|_{I}^{2}=\int _{x\in M}\left\|\nabla _{M}f(x)\right\|^{2}\,d{\mathcal {P}}_{X}(x)} In practice, this norm cannot be computed directly because the marginal distribution P X {\displaystyle {\mathcal {P}}_{X}} is unknown, but it can be estimated from the provided data. === Graph-based approach of the Laplacian norm === When the distances between input points are interpreted as a graph, then the Laplacian matrix of the graph can help to estimate the marginal distribution. Suppose that the input data include ℓ {\displaystyle \ell } labeled examples (pairs of an input x {\displaystyle x} and a label y {\displaystyle y} ) and u {\displaystyle u} unlabeled examples (inputs without associated labels). Define W {\displaystyle W} to be a matrix of edge weights for a graph, where W i j {\displaystyle W_{ij}} is a similarity built from distance measure between the data points x i {\displaystyle x_{i}} and x j {\displaystyle x_{j}} (so that more close implies higher W i j {\displaystyle W_{ij}} ). Define D {\displaystyle D} to be a diagonal matrix with D i i = ∑ j = 1 ℓ + u W i j {\displaystyle D_{ii}=\sum _{j=1}^{\ell +u}W_{ij}} and L {\displaystyle L} to be the Laplacian matrix D − W {\displaystyle D-W} . Then, as the number of data points ℓ + u {\displaystyle \ell +u} increases, L {\displaystyle L} converges to the Laplace–Beltrami operator Δ M {\displaystyle \Delta _{M}} , which is the divergence of the gradient ∇ M {\displaystyle \nabla _{M}} . Then, if f {\displaystyle \mathbf {f} } is a vector of the values of f {\displaystyle f} at the data, f = [ f ( x 1 ) , … , f ( x l + u ) ] T {\displaystyle \mathbf {f} =[f(x_{1}),\ldots ,f(x_{l+u})]^{\mathrm {T} }} , the intrinsic norm can be estimated: ‖ f ‖ I 2 = 1 ( ℓ + u ) 2 f T L f {\displaystyle \left\|f\right\|_{I}^{2}={\frac {1}{(\ell +u)^{2}}}\mathbf {f} ^{\mathrm {T} }L\mathbf {f} } As the number of data points ℓ + u {\displaystyle \ell +u} increases, this empirical definition of ‖ f ‖ I 2 {\displaystyle \left\|f\right\|_{I}^{2}} converges to the definition when P X {\displaystyle {\mathcal {P}}_{X}} is known. === Solving the regularization problem with graph-based approach === Using the weights γ A {\displaystyle \gamma _{A}} and γ I {\displaystyle \gamma _{I}} for the ambient and intrinsic regularizers, the final expression to be solved becomes: arg min f ∈ H 1 ℓ ∑ i = 1 ℓ V ( f ( x i ) , y i ) + γ A ‖ f ‖ K 2 + γ I ( ℓ + u ) 2 f T L f {\displaystyle {\underset {f\in {\mathcal {H}}}{\arg \!\min }}{\frac {1}{\ell }}\sum _{i=1}^{\ell }V(f(x_{i}),y_{i})+\gamma _{A}\left\|f\right\|_{K}^{2}+{\frac {\gamma _{I}}{(\ell +u)^{2}}}\mathbf {f} ^{\mathrm {T} }L\mathbf {f} } As with other kernel methods, H {\displaystyle {\mathcal {H}}} may be an infinite-dimensional space, so if the regularization expression cannot be solved explicitly, it is impossible to search the entire space for a solution. Instead, a representer theorem shows that under certain conditions on the choice of the norm ‖ f ‖ I {\displaystyle \left\|f\right\|_{I}} , the optimal solution f ∗ {\displaystyle f^{}} must be a linear combination of the kernel centered at each of the input points: for some weights α i {\displaystyle \alpha _{i}} , f ∗ ( x ) = ∑ i = 1 ℓ + u α i K ( x i , x ) {\displaystyle f^{}(x)=\sum _{i=1}^{\ell +u}\alpha _{i}K(x_{i},x)} Using this result, it is possible to search for the optimal solution f ∗ {\displaystyle f^{}} by searching the finite-dimensional space defined by the possible choices of α i {\displaystyle \alpha _{i}} . === Functional approach of the Laplacian norm === The idea beyond the graph-Laplacian is to use neighbors to estimate the Laplacian. This method is akin to local averaging methods, that are known to scale poorly in high-dimensional problems. Indeed, the graph Laplacian is known to suffer from the curse of dimensionality. Luckily, it is possible to leverage expected smoothness of the function to estimate thanks to more advanced functional analysis. This method consists of estimating the Laplacian operator using derivatives of the kernel reading ∂ 1 , j K ( x i , x ) {\displaystyle \partial _{1,j}K(x_{i},x)} where ∂ 1 , j {\displaystyle \partial _{1,j}} denotes the partial derivatives according to the j-th coordinate of the first variable. This second approach to the Laplacian norm is to put in relation with meshfree methods, that contrast with the finite difference method in PDE. == Applications == Manifold regularization can extend a variety of algorithms that can be expressed using Tikhonov regularization, by choosing an appropriate loss function V {\displaystyle V} and hypothesis space H {\displaystyle {\mathcal {H}}} . Two commonly used examples are the families of support vector machines and regularized least squares algorithm

  Read more →
• 

  JQuery

  jQuery is a JavaScript library designed to simplify HTML DOM tree traversal and manipulation, as well as event handling, CSS animations, and Ajax. It is free, open-source software using the permissive MIT License. As of August 2022, jQuery is used by 77% of the 10 million most popular websites. Web analysis indicates that it is the most widely deployed JavaScript library by a large margin, having at least three to four times more usage than any other JavaScript library. jQuery's syntax is designed to make it easier to navigate a document, select DOM elements, create animations, handle events, and develop Ajax applications. jQuery also provides capabilities for developers to create plug-ins on top of the JavaScript library. This enables developers to create abstractions for low-level interaction and animation, advanced effects and high-level, theme-able widgets. The modular approach to the jQuery library allows the creation of powerful dynamic web pages and Web applications. The set of jQuery core features—DOM element selections, traversal, and manipulation—enabled by its selector engine (named "Sizzle" from v1.3), created a new "programming style", fusing algorithms and DOM data structures. This style influenced the architecture of other JavaScript frameworks like YUI v3 and Dojo, later stimulating the creation of the standard Selectors API. Microsoft and Nokia bundle jQuery on their platforms. Microsoft includes it with Visual Studio for use within Microsoft's ASP.NET AJAX and ASP.NET MVC frameworks while Nokia has integrated it into the Web Run-Time widget development platform. == Overview == jQuery, at its core, is a Document Object Model (DOM) manipulation library. The DOM is a tree-structure representation of all the elements of a Web page. jQuery simplifies the syntax for finding, selecting, and manipulating these DOM elements. For example, jQuery can be used for finding an element in the document with a certain property (e.g. all elements with the h1 tag), changing one or more of its attributes (e.g. color, visibility), or making it respond to an event (e.g. a mouse click). jQuery also provides a paradigm for event handling that goes beyond basic DOM element selection and manipulation. The event assignment and the event callback function definition are done in a single step in a single location in the code. jQuery also aims to incorporate other highly used JavaScript functionality (e.g. fade ins and fade outs when hiding elements, animations by manipulating CSS properties). The principles of developing with jQuery are: Separation of JavaScript and HTML: The jQuery library provides simple syntax for adding event handlers to the DOM using JavaScript, rather than adding HTML event attributes to call JavaScript functions. Thus, it encourages developers to completely separate JavaScript code from HTML markup. Brevity and clarity: jQuery promotes brevity and clarity with features like "chainable" functions and shorthand function names. Elimination of cross-browser incompatibilities: The JavaScript engines of different browsers differ slightly so JavaScript code that works for one browser may not work for another. Like other JavaScript toolkits, jQuery handles all these cross-browser inconsistencies and provides a consistent interface that works across different browsers. Extensibility: New events, elements, and methods can be easily added and then reused as a plugin. == History == jQuery was originally created in January 2006 at BarCamp NYC by John Resig, influenced by Dean Edwards' earlier cssQuery library. It is currently maintained by a team of developers led by Timmy Willison (with the jQuery selector engine, Sizzle, being led by Richard Gibson). jQuery was originally licensed under the CC BY-SA 2.5, and relicensed to the MIT License in 2006. At the end of 2006, it was dual-licensed under GPL and MIT licenses. As this led to some confusion, in 2012 the GPL was dropped and is now only licensed under the MIT license. === Popularity === In 2015, jQuery was used on 62.7% of the top 1 million websites (according to BuiltWith), and 17% of all Internet websites. In 2017, jQuery was used on 69.2% of the top 1 million websites (according to Libscore). In 2018, jQuery was used on 78% of the top 1 million websites. In 2019, jQuery was used on 80% of the top 1 million websites (according to BuiltWith), and 74.1% of the top 10 million (per W3Techs). In 2021, jQuery was used on 77.8% of the top 10 million websites (according to W3Techs). == Features == jQuery includes the following features: DOM element selections using the multi-browser open source selector engine Sizzle, a spin-off of the jQuery project DOM manipulation based on CSS selectors that uses elements' names and attributes, such as id and class, as criteria to select nodes in the DOM Events Effects and animations Ajax Deferred and Promise objects to control asynchronous processing JSON parsing Extensibility through plug-ins Utilities, such as feature detection Compatibility methods that are natively available in modern browsers, but need fallbacks for old browsers, such as jQuery.inArray() and jQuery.each(). Cross-browser support === Browser support === jQuery 3.0 and newer supports "current−1 versions" (meaning the current stable version of the browser and the version that preceded it) of Firefox (and ESR), Chrome, Safari, and Edge as well as Internet Explorer 9 and newer. On mobile it supports iOS 7 and newer, and Android 4.0 and newer. == Distribution == The jQuery library is typically distributed as a single JavaScript file that defines all its interfaces, including DOM, Events, and Ajax functions. It can be included within a Web page by linking to a local copy or by linking to one of the many copies available from public servers. jQuery has a content delivery network (CDN) hosted by MaxCDN. Google in Google Hosted Libraries service and Microsoft host the library as well. Example of linking a copy of the library locally (from the same server that hosts the Web page): Example of linking a copy of the library from jQuery's public CDN: == Interface == === Functions === jQuery provides two kinds of functions, static utility functions and jQuery object methods. Each has its own usage style. Both are accessed through jQuery's main identifier: jQuery. This identifier has an alias named $. All functions can be accessed through either of these two names. ==== jQuery methods ==== The jQuery function is a factory for creating a jQuery object that represents one or more DOM nodes. jQuery objects have methods to manipulate these nodes. These methods (sometimes called commands), are chainable as each method also returns a jQuery object. Access to and manipulation of multiple DOM nodes in jQuery typically begins with calling the $ function with a CSS selector string. This returns a jQuery object referencing all the matching elements in the HTML page. $("div.test"), for example, returns a jQuery object with all the div elements that have the class test. This node set can be manipulated by calling methods on the returned jQuery object. ==== Static utilities ==== These are utility functions and do not directly act upon a jQuery object. They are accessed as static methods on the jQuery or $ identifier. For example, $.ajax() is a static method. === No-conflict mode === jQuery provides a $.noConflict() function, which relinquishes control of the $ name. This is useful if jQuery is used on a Web page also linking another library that demands the $ symbol as its identifier. In no-conflict mode, developers can use jQuery as a replacement for $ without losing functionality. === Typical start-point === Typically, jQuery is used by putting initialization code and event handling functions in $(handler). This is triggered by jQuery when the browser has finished constructing the DOM for the current Web page. or Historically, $(document).ready(callback) has been the de facto idiom for running code after the DOM is ready. However, since jQuery 3.0, developers are encouraged to use the much shorter $(handler) signature instead. === Chaining === jQuery object methods typically also return a jQuery object, which enables the use of method chains: This line finds all div elements with class attribute test , then registers an event handler on each element for the "click" event, then adds the class attribute foo to each element. Certain jQuery object methods retrieve specific values (instead of modifying a state). An example of this is the val() method, which returns the current value of a text input element. In these cases, a statement such as $('#user-email').val() cannot be used for chaining as the return value does not reference a jQuery object. === Creating new DOM elements === Besides accessing existing DOM nodes through jQuery, it is also possible to create new DOM nodes, if the string passed as the argument to $() factory looks like HTML. For example, the below code finds an HTML select element, and cr

  Read more →
• 

  BitClout

  BitClout was an open source blockchain-based social media platform. On the platform, users could post short-form writings and photos, award money to posts they particularly like by clicking a diamond icon, as well as buy and sell "creator coins" (personalized tokens whose value depends on people's reputations). BitClout ran on a custom proof of work blockchain, and was a prototype of what can be built on DeSo (short for "Decentralized Social"). BitClout's founder and primary leader is Nader al-Naji, known pseudonymously as "Diamondhands". Under development since 2019, BitClout's blockchain created its first block in January 2021, and BitClout itself launched publicly in March 2021. The platform launched with 15,000 "reserved" accounts — a move intended to prevent impersonation, but which backfired as some people with reserved accounts tried to actively distance themselves. Later, in September 2021, BitClout was revealed to be the flagship product of the DeSo blockchain. == History == === Origins (2019 - March 2021) === In early 2019, Nader al-Naji became interested in "mixing investing and social media". He started creating a custom blockchain in May 2019, but didn't tell anyone else until November 2020. However, in the fall of 2020, al-Naji pitched BitClout's own investors under his real name and began posting job listings for a "new operation". Although BitClout was not originally intended to launch until mid-2021, its development was sped up due to "zeitgeist about decentralized social media" in January 2021. BitClout's first block was mined on 18 January 2021. Its next block was mined on 1 March 2021. === As BitClout (March - September 2021) === In early March 2021, about fifty investors received links to a password-protected website with the BitClout white paper. They were encouraged to explore the site and send the same link to "two or three other 'trusted contacts'". Within weeks users were spending millions of dollars per day on the platform. The platform's founders said they were "completely unprepared", having planned to have a "soft-launch". The leader went by the name "diamondhands" on the platform. On 24 March 2021, BitClout launched out of private beta. Investors include Sequoia Capital, Andreessen Horowitz, the venture capital firm Social Capital, Coinbase Ventures, Winklevoss Capital Management, Alexis Ohanian, Polychain, Pantera, and Digital Currency Group (CoinDesk's parent company). During its initial launch, BitClout's currency could be bought with bitcoin, but not sold except on Discord servers or Twitter threads. A single bitcoin wallet related to BitClout received more than $165M worth of deposits. In March 2021, law firm Anderson Kill P.C. sent Nader al-Naji, the presumed leader of the BitClout platform, a cease-and-desist letter, demanding the removal of Brandon Curtis's account and alleging that BitClout violated sections 1798 and 3344 of the California Civil Code by using Curtis's name and likeness without his consent. Curtis also tweeted, "Adopting Bitcoin's aesthetic to raise VC funding to carry out unethical and blatantly illegal schemes like BitClout: not cool". (However, Curtis's coin, despite not being listed on the official website, can still be bought by users searching for the original username.) Additionally, in April 2021, Lee Hsien Loong asked for his name and photograph to be removed from the site, stating that he has "nothing to do with the platform" and that "it is misleading and done without [his] permission". On 18 May 2021, diamondhands announced that 100% of the BitClout code went public. On 12 June 2021, the supply of BitClout was capped at around 11 million coins. On 18 July 2021, BitClout added the ability for users to mint and purchase NFTs within the platform. === As part of DeSo (September 2021 - July 2024) === On 21 September 2021, it was revealed that BitClout was a prototype built on DeSo, short for "Decentralized Social". As a part of this revelation, diamondhands confirmed his identity as Nader al-Naji. (As early as April 2021, it had been believed that diamondhands indeed was that person.)The Bitclout project raised $200M in funding, which went to setting up the DeSo Foundation. === End and aftermath (July 2024 - present) === In July 2024, al-Naji was arrested by the FBI and charged with wire fraud involving BitClout. He also faced civil charges of securities fraud and unregistered offers and sales of securities from the Securities and Exchange Commission. In response, the official "deso" account posted that al-Naji was "safe and at home" and "that this experience has only reinforced [his] commitment to DeSo". In February 2025, the Justice Department dropped its case against al-Naji. In March 2026, the SEC voluntarily dismissed the enforcement case with prejudice. == Design == BitClout is a social media platform. Its users can post short-form writings and photos (similarly to Twitter). They can award money to posts they particularly like by clicking a diamond icon (similarly to Twitch Bits). The prices of each account's "creator coin" goes up and down with the popularity of the celebrity behind it. For example, if someone says something negative, the value of their corresponding account may go down. This price is computed automatically according to the formula p r i c e _ i n _ b i t c l o u t = .003 ∗ c r e a t o r _ c o i n s _ i n _ c i r c u l a t i o n 2 {\displaystyle price\_in\_bitclout=.003creator\_coins\_in\_circulation^{2}} . At launch time, BitClout scraped 15,000 profiles of celebrities from Twitter to create "reserved" accounts in their names. To claim a reserved account, the account holder would need to tweet about it (which also serves as a marketing strategy). At least 80 such reserved profiles have been claimed. Proof of stake was introduced in March 2024.

  Read more →