AI Video Generator Tools

AI Video Generator Tools — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Autonomous aircraft

  An autonomous aircraft is an aircraft which flies under the control of on-board autonomous robotic systems and needs no intervention from a human pilot or remote control. Most contemporary autonomous aircraft are unmanned aerial vehicles (drones) with pre-programmed algorithms to perform designated tasks, but advancements in artificial intelligence technologies (e.g. machine learning) mean that autonomous control systems are reaching a point where several air taxis and associated regulatory regimes are being developed. == History == === Unmanned aerial vehicles === The earliest recorded use of an unmanned aerial vehicle for warfighting occurred in July 1849, serving as a balloon carrier (the precursor to the aircraft carrier) Significant development of radio-controlled drones started in the early 1900s, and originally focused on providing practice targets for training military personnel. The earliest attempt at a powered UAV was A. M. Low's "Aerial Target" in 1916. Autonomous features such as the autopilot and automated navigation were developed progressively through the twentieth century, although techniques such as terrain contour matching (TERCOM) were applied mainly to cruise missiles. Before the introduction of the Bayraktar Kızılelma some modern drones have a high degree of autonomy, although they were not fully capable and the regulatory environment prohibits their widespread use in civil aviation. However some limited trials had been undertaken. On December 17, 2025, two Bayraktar Kızılelma performed the world's first autonomous close-formation flight by two unmanned fighter jets, using artificial intelligence. This was the first time in the history of aviation when two unmanned aerial vehicles flew in close formation on their own. === Passengers === As flight, navigation and communications systems have become more sophisticated, safely carrying passengers has emerged as a practical possibility. Autopilot systems are relieving the human pilot of progressively more duties, but the pilot currently remains necessary. A number of air taxis are under development and larger autonomous transports are also being planned. The personal air vehicle is another class where from one to four passengers are not expected to be able to pilot the aircraft and autonomy is seen as necessary for widespread adoption. == Control system architecture == The computing capability of aircraft flight and navigation systems followed the advances of computing technology, beginning with analog controls and evolving into microcontrollers, then system-on-a-chip (SOC) and single-board computers (SBC). === Sensors === Position and movement sensors give information about the aircraft state. Exteroceptive sensors deal with external information like distance measurements, while proprioceptive ones correlate internal and external states. Degrees of freedom (DOF) refers to both the amount and quality of sensors on board: 6 DOF implies 3-axis gyroscopes and accelerometers (a typical inertial measurement unit – IMU), 9 DOF refers to an IMU plus a compass, 10 DOF adds a barometer and 11 DOF usually adds a GPS receiver. === Actuators === UAV actuators include digital electronic speed controllers (which control the RPM of the motors) linked to motors/engines and propellers, servomotors (for planes and helicopters mostly), weapons, payload actuators, LEDs and speakers. === Software === UAV software called the flight stack or autopilot. The purpose of the flight stack is to obtain data from sensors, control motors to ensure UAV stability, and facilitate ground control and mission planning communication. UAVs are real-time systems that require rapid response to changing sensor data. As a result, UAVs rely on single-board computers for their computational needs. Examples of such single-board computers include Raspberry Pis, Beagleboards, etc. shielded with NavIO, PXFMini, etc. or designed from scratch such as NuttX, preemptive-RT Linux, Xenomai, Orocos-Robot Operating System or DDS-ROS 2.0. Civil-use open-source stacks include: Due to the open-source nature of UAV software, they can be customized to fit specific applications. For example, researchers from the Technical University of Košice have replaced the default control algorithm of the PX4 autopilot. This flexibility and collaborative effort has led to a large number of different open-source stacks, some of which are forked from others, such as CleanFlight, which is forked from BaseFlight and from which three other stacks are forked from. === Loop principles === UAVs employ open-loop, closed-loop or hybrid control architectures. Open loop – This type provides a positive control signal (faster, slower, left, right, up, down) without incorporating feedback from sensor data. Closed loop – This type incorporates sensor feedback to adjust behavior (reduce speed to reflect tailwind, move to altitude 300 feet). The PID controller is common. Sometimes, feedforward is employed, transferring the need to close the loop further. == Communications == Most UAVs use a radio for remote control and exchange of video and other data. Early UAVs had only narrowband uplink. Downlinks came later. These bi-directional narrowband radio links carried command and control (C&C) and telemetry data about the status of aircraft systems to the remote operator. For very long range flights, military UAVs also use satellite receivers as part of satellite navigation systems. In cases when video transmission was required, the UAVs will implement a separate analog video radio link. In most modern autonomous applications, video transmission is required. A broadband link is used to carry all types of data on a single radio link. These broadband links can leverage quality of service techniques to optimize the C&C traffic for low latency. Usually, these broadband links carry TCP/IP traffic that can be routed over the Internet. Communications can be established with: Ground control – a military ground control station (GCS). The MAVLink protocol is increasingly becoming popular to carry command and control data between the ground control and the vehicle. Remote network system, such as satellite duplex data links for some military powers. Downstream digital video over mobile networks has also entered consumer markets, while direct UAV control uplink over the cellular mesh and LTE have been demonstrated and are in trials. Another aircraft, serving as a relay or mobile control station – military manned-unmanned teaming (MUM-T). As mobile networks have increased in performance and reliability over the years, drones have begun to use mobile networks for communication. Mobile networks can be used for drone tracking, remote piloting, over the air updates, and cloud computing. Modern networking standards have explicitly considered autonomous aircraft and therefore include optimizations. The 5G standard has mandated reduced user plane latency to 1ms while using ultra-reliable and low-latency communications. == Autonomy == Basic autonomy comes from proprioceptive sensors. Advanced autonomy calls for situational awareness, knowledge about the environment surrounding the aircraft from exteroceptive sensors: sensor fusion integrates information from multiple sensors. Civil aviation regulators and standards bodies have published high-level roadmaps and discussion papers focused on assurance, safety and governance of AI-enabled systems in aviation, particularly as autonomy increases in operations and decision support. === Basic principles === One way to achieve autonomous control employs multiple control-loop layers, as in hierarchical control systems. As of 2016 the low-layer loops (i.e. for flight control) tick as fast as 32,000 times per second, while higher-level loops may cycle once per second. The principle is to decompose the aircraft's behavior into manageable "chunks", or states, with known transitions. Hierarchical control system types range from simple scripts to finite state machines, behavior trees and hierarchical task planners. The most common control mechanism used in these layers is the PID controller which can be used to achieve hover for a quadcopter by using data from the IMU to calculate precise inputs for the electronic speed controllers and motors. Examples of mid-layer algorithms: Path planning: determining an optimal path for vehicle to follow while meeting mission objectives and constraints, such as obstacles or fuel requirements Trajectory generation (motion planning): determining control maneuvers to take in order to follow a given path or to go from one location to another Trajectory regulation: constraining a vehicle within some tolerance to a trajectory Evolved UAV hierarchical task planners use methods like state tree searches or genetic algorithms. === Autonomy features === UAV manufacturers often build in specific autonomous operations, such as: Self-level: attitude stabilization on the pitch and roll axes. Altitude hold: The aircraft maint

  Read more →
• 

  Neurorobotics

  Neurorobotics is the combined study of neuroscience, robotics, and artificial intelligence. It is the science and technology of embodied autonomous neural systems. Neural systems include brain-inspired algorithms (e.g. connectionist networks), computational models of biological neural networks (e.g. artificial spiking neural networks, large-scale simulations of neural microcircuits) and actual biological systems (e.g. in vivo and in vitro neural nets). Such neural systems can be embodied in machines with mechanic or any other forms of physical actuation. This includes robots, prosthetic or wearable systems but also, at smaller scale, micro-machines and, at the larger scales, furniture and infrastructures. Neurorobotics is that branch of neuroscience with robotics, which deals with the study and application of science and technology of embodied autonomous neural systems like brain-inspired algorithms. It is based on the idea that the brain is embodied and the body is embedded in the environment. Therefore, most neurorobots are required to function in the real world, as opposed to a simulated environment. Beyond brain-inspired algorithms for robots neurorobotics may also involve the design of brain-controlled robot systems. == Major classes of models == Neurorobots can be divided into various major classes based on the robot's purpose. Each class is designed to implement a specific mechanism of interest for study. Common types of neurorobots are those used to study motor control, memory, action selection, and perception. === Locomotion and motor control === Neurorobots are often used to study motor feedback and control systems, and have proved their merit in developing controllers for robots. Locomotion is modeled by a number of neurologically inspired theories on the action of motor systems. Locomotion control has been mimicked using models or central pattern generators, clumps of neurons capable of driving repetitive behavior, to make four-legged walking robots. Other groups have expanded the idea of combining rudimentary control systems into a hierarchical set of simple autonomous systems. These systems can formulate complex movements from a combination of these rudimentary subsets. This theory of motor action is based on the organization of cortical columns, which progressively integrate from simple sensory input into a complex afferent signals, or from complex motor programs to simple controls for each muscle fiber in efferent signals, forming a similar hierarchical structure. Another method for motor control uses learned error correction and predictive controls to form a sort of simulated muscle memory. In this model, awkward, random, and error-prone movements are corrected for using error feedback to produce smooth and accurate movements over time. The controller learns to create the correct control signal by predicting the error. Using these ideas, robots have been designed which can learn to produce adaptive arm movements or to avoid obstacles in a course. === Learning and memory systems === Robots designed to test theories of animal memory systems. Many studies examine the memory system of rats, particularly the rat hippocampus, dealing with place cells, which fire for a specific location that has been learned. Systems modeled after the rat hippocampus are generally able to learn mental maps of the environment, including recognizing landmarks and associating behaviors with them, allowing them to predict the upcoming obstacles and landmarks. Another study has produced a robot based on the proposed learning paradigm of barn owls for orientation and localization based on primarily auditory, but also visual stimuli. The hypothesized method involves synaptic plasticity and neuromodulation, a mostly chemical effect in which reward neurotransmitters such as dopamine or serotonin affect the firing sensitivity of a neuron to be sharper. The robot used in the study adequately matched the behavior of barn owls. Furthermore, the close interaction between motor output and auditory feedback proved to be vital in the learning process, supporting active sensing theories that are involved in many of the learning models. Neurorobots in these studies are presented with simple mazes or patterns to learn. Some of the problems presented to the neurorobot include recognition of symbols, colors, or other patterns and execute simple actions based on the pattern. In the case of the barn owl simulation, the robot had to determine its location and direction to navigate in its environment. === Action selection and value systems === Action selection studies deal with negative or positive weighting to an action and its outcome. Neurorobots can and have been used to study simple ethical interactions, such as the classical thought experiment where there are more people than a life raft can hold, and someone must leave the boat to save the rest. However, more neurorobots used in the study of action selection contend with much simpler persuasions such as self-preservation or perpetuation of the population of robots in the study. These neurorobots are modeled after the neuromodulation of synapses to encourage circuits with positive results. In biological systems, neurotransmitters such as dopamine or acetylcholine positively reinforce neural signals that are beneficial. One study of such interaction involved the robot Darwin VII, which used visual, auditory, and a simulated taste input to "eat" conductive metal blocks. The arbitrarily chosen good blocks had a striped pattern on them while the bad blocks had a circular shape on them. The taste sense was simulated by conductivity of the blocks. The robot had positive and negative feedbacks to the taste based on its level of conductivity. The researchers observed the robot to see how it learned its action selection behaviors based on the inputs it had. Other studies have used herds of small robots which feed on batteries strewn about the room, and communicate its findings to other robots. === Sensory perception === Neurorobots have also been used to study sensory perception, particularly vision. These are primarily systems that result from embedding neural models of sensory pathways in automatas. This approach gives exposure to the sensory signals that occur during behavior and also enables a more realistic assessment of the degree of robustness of the neural model. It is well known that changes in the sensory signals produced by motor activity provide useful perceptual cues that are used extensively by organisms. For example, researchers have used the depth information that emerges during replication of human head and eye movements to establish robust representations of the visual scene. == Biological robots == Biological robots are not officially neurorobots in that they are not neurologically inspired AI systems, but actual neuron tissue wired to a robot. This employs the use of cultured neural networks to study brain development or neural interactions. These typically consist of a neural culture raised on a multielectrode array (MEA), which is capable of both recording the neural activity and stimulating the tissue. In some cases, the MEA is connected to a computer which presents a simulated environment to the brain tissue and translates brain activity into actions in the simulation, as well as providing sensory feedback The ability to record neural activity gives researchers a window into a brain, which they can use to learn about a number of the same issues neurorobots are used for. An area of concern with the biological robots is ethics. Many questions are raised about how to treat such experiments. The central question concerns consciousness and whether or not the rat brain experiences it. There are many theories about how to define consciousness. == Implications for neuroscience == Neuroscientists benefit from neurorobotics because it provides a blank slate to test various possible methods of brain function in a controlled and testable environment. While robots are more simplified versions of the systems they emulate, they are more specific, allowing more direct testing of the issue at hand. They also have the benefit of being accessible at all times, while it is more difficult to monitor large portions of a brain while the human or animal is active, especially individual neurons. The development of neuroscience has produced neural treatments. These include pharmaceuticals and neural rehabilitation. Progress is dependent on an intricate understanding of the brain and how exactly it functions. It is difficult to study the brain, especially in humans, due to the danger associated with cranial surgeries. Neurorobots can improved the range of tests and experiments that can be performed in the study of neural processes.

  Read more →
• 

  Automated Mathematician

  The Automated Mathematician (AM) is one of the earliest successful discovery systems. It was created by Douglas Lenat in Lisp, and in 1977 led to Lenat being awarded the IJCAI Computers and Thought Award. AM worked by generating and modifying short Lisp programs which were then interpreted as defining various mathematical concepts; for example, a program that tested equality between the length of two lists was considered to represent the concept of numerical equality, while a program that produced a list whose length was the product of the lengths of two other lists was interpreted as representing the concept of multiplication. The system had elaborate heuristics for choosing which programs to extend and modify, based on the experiences of working mathematicians in solving mathematical problems. == Controversy == Lenat claimed that the system was composed of hundreds of data structures called "concepts", together with hundreds of "heuristic rules" and a simple flow of control: "AM repeatedly selects the top task from the agenda and tries to carry it out. This is the whole control structure!" Yet the heuristic rules were not always represented as separate data structures; some had to be intertwined with the control flow logic. Some rules had preconditions that depended on the history, or otherwise could not be represented in the framework of the explicit rules. What's more, the published versions of the rules often involve vague terms that are not defined further, such as "If two expressions are structurally similar, ..." (Rule 218) or "... replace the value obtained by some other (very similar) value..." (Rule 129). Another source of information is the user, via Rule 2: "If the user has recently referred to X, then boost the priority of any tasks involving X." Thus, it appears quite possible that much of the real discovery work is buried in unexplained procedures. Lenat claimed that the system had rediscovered both Goldbach's conjecture and the fundamental theorem of arithmetic. Later critics accused Lenat of over-interpreting the output of AM. In his paper Why AM and Eurisko appear to work, Lenat conceded that any system that generated enough short Lisp programs would generate ones that could be interpreted by an external observer as representing equally sophisticated mathematical concepts. However, he argued that this property was in itself interesting—and that a promising direction for further research would be to look for other languages in which short random strings were likely to be useful. == Successor == This intuition was the basis of AM's successor Eurisko, which attempted to generalize the search for mathematical concepts to the search for useful heuristics.

  Read more →
• 

  Bayesian programming

  Bayesian programming is a formalism and a methodology for having a technique to specify probabilistic models and solve problems when less than the necessary information is available. Edwin T. Jaynes proposed that probability could be considered as an alternative and an extension of logic for rational reasoning with incomplete and uncertain information. In his founding book Probability Theory: The Logic of Science he developed this theory and proposed what he called "the robot," which was not a physical device, but an inference engine to automate probabilistic reasoning—a kind of Prolog for probability instead of logic. Bayesian programming is a formal and concrete implementation of this "robot". Bayesian programming may also be seen as an algebraic formalism to specify graphical models such as, for instance, Bayesian networks, dynamic Bayesian networks, Kalman filters or hidden Markov models. Indeed, Bayesian programming is more general than Bayesian networks and has a power of expression equivalent to probabilistic factor graphs. == Formalism == A Bayesian program is a means of specifying a family of probability distributions. The constituent elements of a Bayesian program are presented below: Program { Description { Specification ( π ) { Variables Decomposition Forms Identification (based on δ ) Question {\displaystyle {\text{Program}}{\begin{cases}{\text{Description}}{\begin{cases}{\text{Specification}}(\pi ){\begin{cases}{\text{Variables}}\\{\text{Decomposition}}\\{\text{Forms}}\\\end{cases}}\\{\text{Identification (based on }}\delta )\end{cases}}\\{\text{Question}}\end{cases}}} A program is constructed from a description and a question. A description is constructed using some specification ( π {\displaystyle \pi } ) as given by the programmer and an identification or learning process for the parameters not completely specified by the specification, using a data set ( δ {\displaystyle \delta } ). A specification is constructed from a set of pertinent variables, a decomposition and a set of forms. Forms are either parametric forms or questions to other Bayesian programs. A question specifies which probability distribution has to be computed. === Description === The purpose of a description is to specify an effective method of computing a joint probability distribution on a set of variables { X 1 , X 2 , ⋯ , X N } {\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}} given a set of experimental data δ {\displaystyle \delta } and some specification π {\displaystyle \pi } . This joint distribution is denoted as: P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) {\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)} . To specify preliminary knowledge π {\displaystyle \pi } , the programmer must undertake the following: Define the set of relevant variables { X 1 , X 2 , ⋯ , X N } {\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}} on which the joint distribution is defined. Decompose the joint distribution (break it into relevant independent or conditional probabilities). Define the forms of each of the distributions (e.g., for each variable, one of the list of probability distributions). ==== Decomposition ==== Given a partition of { X 1 , X 2 , … , X N } {\displaystyle \left\{X_{1},X_{2},\ldots ,X_{N}\right\}} containing K {\displaystyle K} subsets, K {\displaystyle K} variables are defined L 1 , ⋯ , L K {\displaystyle L_{1},\cdots ,L_{K}} , each corresponding to one of these subsets. Each variable L k {\displaystyle L_{k}} is obtained as the conjunction of the variables { X k 1 , X k 2 , ⋯ } {\displaystyle \left\{X_{k_{1}},X_{k_{2}},\cdots \right\}} belonging to the k t h {\displaystyle k^{th}} subset. Recursive application of Bayes' theorem leads to: P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) = P ( L 1 ∧ ⋯ ∧ L K ∣ δ ∧ π ) = P ( L 1 ∣ δ ∧ π ) × P ( L 2 ∣ L 1 ∧ δ ∧ π ) × ⋯ × P ( L K ∣ L K − 1 ∧ ⋯ ∧ L 1 ∧ δ ∧ π ) {\displaystyle {\begin{aligned}&P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\wedge \cdots \wedge L_{K}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\mid \delta \wedge \pi \right)\times P\left(L_{2}\mid L_{1}\wedge \delta \wedge \pi \right)\times \cdots \times P\left(L_{K}\mid L_{K-1}\wedge \cdots \wedge L_{1}\wedge \delta \wedge \pi \right)\end{aligned}}} Conditional independence hypotheses then allow further simplifications. A conditional independence hypothesis for variable L k {\displaystyle L_{k}} is defined by choosing some variable X n {\displaystyle X_{n}} among the variables appearing in the conjunction L k − 1 ∧ ⋯ ∧ L 2 ∧ L 1 {\displaystyle L_{k-1}\wedge \cdots \wedge L_{2}\wedge L_{1}} , labelling R k {\displaystyle R_{k}} as the conjunction of these chosen variables and setting: P ( L k ∣ L k − 1 ∧ ⋯ ∧ L 1 ∧ δ ∧ π ) = P ( L k ∣ R k ∧ δ ∧ π ) {\displaystyle P\left(L_{k}\mid L_{k-1}\wedge \cdots \wedge L_{1}\wedge \delta \wedge \pi \right)=P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)} We then obtain: P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) = P ( L 1 ∣ δ ∧ π ) × P ( L 2 ∣ R 2 ∧ δ ∧ π ) × ⋯ × P ( L K ∣ R K ∧ δ ∧ π ) {\displaystyle {\begin{aligned}&P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\mid \delta \wedge \pi \right)\times P\left(L_{2}\mid R_{2}\wedge \delta \wedge \pi \right)\times \cdots \times P\left(L_{K}\mid R_{K}\wedge \delta \wedge \pi \right)\end{aligned}}} Such a simplification of the joint distribution as a product of simpler distributions is called a decomposition, derived using the chain rule. This ensures that each variable appears at the most once on the left of a conditioning bar, which is the necessary and sufficient condition to write mathematically valid decompositions. ==== Forms ==== Each distribution P ( L k ∣ R k ∧ δ ∧ π ) {\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)} appearing in the product is then associated with either a parametric form (i.e., a function f μ ( L k ) {\displaystyle f_{\mu }\left(L_{k}\right)} ) or a question to another Bayesian program P ( L k ∣ R k ∧ δ ∧ π ) = P ( L ∣ R ∧ δ ^ ∧ π ^ ) {\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)=P\left(L\mid R\wedge {\widehat {\delta }}\wedge {\widehat {\pi }}\right)} . When it is a form f μ ( L k ) {\displaystyle f_{\mu }\left(L_{k}\right)} , in general, μ {\displaystyle \mu } is a vector of parameters that may depend on R k {\displaystyle R_{k}} or δ {\displaystyle \delta } or both. Learning takes place when some of these parameters are computed using the data set δ {\displaystyle \delta } . An important feature of Bayesian programming is this capacity to use questions to other Bayesian programs as components of the definition of a new Bayesian program. P ( L k ∣ R k ∧ δ ∧ π ) {\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)} is obtained by some inferences done by another Bayesian program defined by the specifications π ^ {\displaystyle {\widehat {\pi }}} and the data δ ^ {\displaystyle {\widehat {\delta }}} . This is similar to calling a subroutine in classical programming and provides an easy way to build hierarchical models. === Question === Given a description (i.e., P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) {\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)} ), a question is obtained by partitioning { X 1 , X 2 , ⋯ , X N } {\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}} into three sets: the searched variables, the known variables and the free variables. The 3 variables S e a r c h e d {\displaystyle Searched} , K n o w n {\displaystyle Known} and F r e e {\displaystyle Free} are defined as the conjunction of the variables belonging to these sets. A question is defined as the set of distributions: P ( S e a r c h e d ∣ Known ∧ δ ∧ π ) {\displaystyle P\left(Searched\mid {\text{Known}}\wedge \delta \wedge \pi \right)} made of many "instantiated questions" as the cardinal of K n o w n {\displaystyle Known} , each instantiated question being the distribution: P ( Searched ∣ Known ∧ δ ∧ π ) {\displaystyle P\left({\text{Searched}}\mid {\text{Known}}\wedge \delta \wedge \pi \right)} === Inference === Given the joint distribution P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) {\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)} , it is always possible to compute any possible question using the following general inference: P ( Searched ∣ Known ∧ δ ∧ π ) = ∑ Free [ P ( Searched ∧ Free ∣ Known ∧ δ ∧ π ) ] = ∑ Free [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] P ( Known ∣ δ ∧ π ) = ∑ Free [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] ∑ Free ∧ Searched [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] = 1 Z × ∑ Free [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] {\displaystyle {\begin{aligned}&P\left({\text{Searched}}\mid {\text{Known}}\wedge \delta \wedge \pi \right)\\={}&\sum _{\text{Free}}\left[P\left({\text{Searched}}\wedge {\text{Free}}\mid {\text{Known}}\wedge \delta \wedge \

  Read more →
• 

  Apache CarbonData

  Apache CarbonData is a free and open-source column-oriented data storage format of the Apache Hadoop ecosystem. It is similar to the other columnar-storage file formats available in Hadoop namely RCFile and ORC. It is compatible with most of the data processing frameworks in the Hadoop environment. It provides efficient data compression and encoding schemes with enhanced performance to handle complex data in bulk. == History == CarbonData was developed at Huawei in 2013. The project was donated to the Apache Community in 2015 submitted to the Apache Incubator in June 2016. The project won top honors in the BlackDuck 2016 Open Source Rookies of the Year's Big Data category. Apache CarbonData has been a top-level Apache Software Foundation (ASF)-sponsored project since May 1, 2017.

  Read more →
• 

  Learning to rank

  Learning to rank (LTR) or machine-learned ranking (MLR) is the application of machine learning, often supervised, semi-supervised or reinforcement learning, in the construction of ranking models for information retrieval and recommender systems. Training data may, for example, consist of lists of items with some partial order specified between items in each list. This order is typically induced by giving a numerical or ordinal score or a binary judgment (e.g. "relevant" or "not relevant") for each item. The goal of constructing the ranking model is to rank new, unseen lists in a similar way to rankings in the training data. == Applications == === In information retrieval === Ranking is a central part of many information retrieval problems, such as document retrieval, collaborative filtering, sentiment analysis, and online advertising. A possible architecture of a machine-learned search engine is shown in the accompanying figure. Training data consists of queries and documents matching them together with the relevance degree of each match. It may be prepared manually by human assessors (or raters, as Google calls them), who check results for some queries and determine relevance of each result. It is not feasible to check the relevance of all documents, and so typically a technique called pooling is used — only the top few documents, retrieved by some existing ranking models are checked. This technique may introduce selection bias. Alternatively, training data may be derived automatically by analyzing clickthrough logs (i.e. search results which got clicks from users), query chains, or such search engines' features as Google's (since-replaced) SearchWiki. Clickthrough logs can be biased by the tendency of users to click on the top search results on the assumption that they are already well-ranked. Training data is used by a learning algorithm to produce a ranking model which computes the relevance of documents for actual queries. Typically, users expect a search query to complete in a short time (such as a few hundred milliseconds for web search), which makes it impossible to evaluate a complex ranking model on each document in the corpus, and so a two-phase scheme is used. First, a small number of potentially relevant documents are identified using simpler retrieval models which permit fast query evaluation, such as the vector space model, Boolean model, weighted AND, or BM25. This phase is called top- k {\displaystyle k} document retrieval and many heuristics were proposed in the literature to accelerate it, such as using a document's static quality score and tiered indexes. In the second phase, a more accurate but computationally expensive machine-learned model is used to re-rank these documents. === In other areas === Learning to rank algorithms have been applied in areas other than information retrieval: In machine translation for ranking a set of hypothesized translations; In computational biology for ranking candidate 3-D structures in protein structure prediction problems; In recommender systems for identifying a ranked list of related news articles to recommend to a user after he or she has read a current news article. == Feature vectors == For the convenience of MLR algorithms, query-document pairs are usually represented by numerical vectors, which are called feature vectors. Such an approach is sometimes called bag of features and is analogous to the bag of words model and vector space model used in information retrieval for representation of documents. Components of such vectors are called features, factors or ranking signals. They may be divided into three groups (features from document retrieval are shown as examples): Query-independent or static features — those features, which depend only on the document, but not on the query. For example, PageRank or document's length. Such features can be precomputed in off-line mode during indexing. They may be used to compute document's static quality score (or static rank), which is often used to speed up search query evaluation. Query-dependent or dynamic features — those features, which depend both on the contents of the document and the query, such as TF-IDF score or other non-machine-learned ranking functions. Query-level features or query features, which depend only on the query. For example, the number of words in a query. Some examples of features, which were used in the well-known LETOR dataset: TF, TF-IDF, BM25, and language modeling scores of document's zones (title, body, anchors text, URL) for a given query; Lengths and IDF sums of document's zones; Document's PageRank, HITS ranks and their variants. Selecting and designing good features is an important area in machine learning, which is called feature engineering. == Evaluation measures == There are several measures (metrics) which are commonly used to judge how well an algorithm is doing on training data and to compare the performance of different MLR algorithms. Often a learning-to-rank problem is reformulated as an optimization problem with respect to one of these metrics. Examples of ranking quality measures: Mean average precision (MAP); DCG and NDCG; Precision@n, NDCG@n, where "@n" denotes that the metrics are evaluated only on top n documents; Mean reciprocal rank; Kendall's tau; Spearman's rho. DCG and its normalized variant NDCG are usually preferred in academic research when multiple levels of relevance are used. Other metrics such as MAP, MRR and precision, are defined only for binary judgments. Recently, there have been proposed several new evaluation metrics which claim to model user's satisfaction with search results better than the DCG metric: Expected reciprocal rank (ERR); Yandex's pfound. Both of these metrics are based on the assumption that the user is more likely to stop looking at search results after examining a more relevant document, than after a less relevant document. == Approaches == Learning to Rank approaches are often categorized using one of three approaches: pointwise (where individual documents are ranked), pairwise (where pairs of documents are ranked into a relative order), and listwise (where an entire list of documents are ordered). Tie-Yan Liu of Microsoft Research Asia has analyzed existing algorithms for learning to rank problems in his book Learning to Rank for Information Retrieval. He categorized them into three groups by their input spaces, output spaces, hypothesis spaces (the core function of the model) and loss functions: the pointwise, pairwise, and listwise approach. In practice, listwise approaches often outperform pairwise approaches and pointwise approaches. This statement was further supported by a large scale experiment on the performance of different learning-to-rank methods on a large collection of benchmark data sets. In this section, without further notice, x {\displaystyle x} denotes an object to be evaluated, for example, a document or an image, f ( x ) {\displaystyle f(x)} denotes a single-value hypothesis, h ( ⋅ ) {\displaystyle h(\cdot )} denotes a bi-variate or multi-variate function and L ( ⋅ ) {\displaystyle L(\cdot )} denotes the loss function. === Pointwise approach === In this case, it is assumed that each query-document pair in the training data has a numerical or ordinal score. Then the learning-to-rank problem can be approximated by a regression problem — given a single query-document pair, predict its score. Formally speaking, the pointwise approach aims at learning a function f ( x ) {\displaystyle f(x)} predicting the real-value or ordinal score of a document x {\displaystyle x} using the loss function L ( f ; x j , y j ) {\displaystyle L(f;x_{j},y_{j})} . A number of existing supervised machine learning algorithms can be readily used for this purpose. Ordinal regression and classification algorithms can also be used in pointwise approach when they are used to predict the score of a single query-document pair, and it takes a small, finite number of values. === Pairwise approach === In this case, the learning-to-rank problem is approximated by a classification problem — learning a binary classifier h ( x u , x v ) {\displaystyle h(x_{u},x_{v})} that can tell which document is better in a given pair of documents. The classifier shall take two documents as its input and the goal is to minimize a loss function L ( h ; x u , x v , y u , v ) {\displaystyle L(h;x_{u},x_{v},y_{u,v})} . The loss function typically reflects the number and magnitude of inversions in the induced ranking. In many cases, the binary classifier h ( x u , x v ) {\displaystyle h(x_{u},x_{v})} is implemented with a scoring function f ( x ) {\displaystyle f(x)} . As an example, RankNet adapts a probability model and defines h ( x u , x v ) {\displaystyle h(x_{u},x_{v})} as the estimated probability of the document x u {\displaystyle x_{u}} has higher quality than x v {\displaystyle x_{v}} : P u , v ( f ) = CDF ( f ( x u ) − f ( x v ) ) , {\displaystyle P_{u,v}(f)={\text{CDF}

  Read more →
• 

  Percept (artificial intelligence)

  A percept is the input that an intelligent agent is perceiving at any given moment. It is essentially the same concept as a percept in psychology, except that it is being perceived not by the brain but by the agent. A percept is detected by a sensor, often a camera, processed accordingly, and acted upon by an actuator. Each percept is added to a "percept sequence", which is a complete history of each percept ever detected. The agent's action at any instant point may depend on the entire percept sequence up to that particular instant point. An intelligent agent chooses how to act not only based on the current percept, but the percept sequence. The next action is chosen by the agent function, which maps every percept to an action. For example, if a camera were to record a gesture, the agent would process the percepts, calculate the corresponding spatial vectors, examine its percept history, and use the agent program (the application of the agent function) to act accordingly. == Examples == Examples of percepts include inputs from touch sensors, cameras, infrared sensors, sonar, microphones, mice, and keyboards. A percept can also be a higher-level feature of the data, such as lines, depth, objects, faces, or gestures.

  Read more →
• 

  AI Security Institute

  The AI Security Institute (AISI) is a research organisation under the Department for Science, Innovation and Technology, UK, that aims "to equip governments with a scientific understanding of the risks posed by advanced AI". It conducts research and develop and test mitigations. Previously, it was known as the AI Safety Institute. Its creation followed world's first major AI Safety Summit that was held in Bletchley Park in 2023. The institute's professed goal is "building the world's leading understanding of advanced AI risks and solutions, to inform governments so they can keep the public safe". It is designed like a startup in the government "combining the authority of government with the expertise and agility of the private sector". AISI has made access agreements with Anthropic, Google and OpenAI to test their models before release. It has an open source platform called Inspect that permits companies, governments and academics to run standardised safety tests for AI usage. Among the works AISI has done is the reported detection of multiple serious vulnerabilities that could enable development of biological weapons; the vulnerabilities were fixed before the model was launched. It conducts research on diverse fields of AI application. One study by AISI found that LLMs post-trained for political persuasiveness became systematically less accurate and up to 51% more persuasive on political issues. AISI has also worked on the usage of AI for emotional needs. It found that nearly 10 percent of UK citizens used systems like chatbots for emotional purposes on a weekly basis. It found that "systems are now outperforming PhD-level researchers on scientific knowledge tests and helping non-experts succeed at lab work that would previously have been out of reach" in a report published in December 2025. Former chief AI officer of GCHQ Adam Beaumont is the institution's interim director. UK prime minister's AI advisor Jade Leung is the chief technology officer.

  Read more →
• 

  Networked Help Desk

  Networked Help Desk is an open standard initiative to provide a common API for sharing customer support tickets between separate instances of issue tracking, bug tracking, customer relationship management (CRM) and project management systems to improve customer service and reduce vendor lock-in. The initiative was created by Zendesk in June 2011 in collaboration with eight other founding member organizations including Atlassian, New Relic, OTRS, Pivotal Tracker, ServiceNow and SugarCRM. The first integration, between Zendesk and Atlassian's issue tracking product, Jira, was announced at the 2011 Atlassian Summit. By August 2011, 34 member companies had joined the initiative. A year after launching, over 50 organizations had joined. Within Zendesk instances this feature is branded as ticket sharing. == Basis == Support tools are generally built around a common paradigm that begins with a customer making a request or an incident report, these create a ticket. Each ticket has a progress status and is updated with annotations and attachments. These annotations and attachments may be visible to the customer (public), or only visible to analysts (private). Customers are notified of progress made on their ticket until it is complete. If the people necessary to complete a ticket are using separate support tools, additional overhead is introduced in maintaining the relevant information in the ticket in each tool while notifying the customer of progress made by each group in completing their ticket. For example, if a customer support issue is caused by a software bug and reported to a help desk using one system, and then the fix is documented by the developers in another, and analyzed in a customer relationship management tool, keeping the records in each system up-to-date and notifying the customer manually using a swivel chair approach is unnecessarily time-consuming and error-prone. If information is not transferred correctly, a customer may have to re-explain their problem each time their ticket is transferred. For systems with the Networked Help Desk API implemented, it is possible for several different applications related to a customer's support experience to synchronize data in one uniquely identified shared ticket. While many applications in these domains have implemented APIs that allow data to be imported, exported and modified, Network Help Desk provide a common standard for customer support information to automatically synchronize between several systems. Once implemented, two systems can quickly share tickets with just a configuration change as they both understand the same interface. Communication between two instances on a specific ticket occurs in three steps, an invitation agreement, sharing of ticket data and continued synchronization of tickets. The standard allows for "full delegation" (analysts in both systems each make public and private comments and synchronize status) as well as "partial delegation" where the instance receiving the ticket can only make private comments and status changes are not synchronized. Tickets may be shared with multiple instances. == Implementation list ==

  Read more →
• 

  Leakage (machine learning)

  In statistics and machine learning, leakage (also known as data leakage or target leakage) refers to the use of information during model training that would not be available at prediction time. This results in overly optimistic performance estimates, as the model appears to perform better during evaluation than it actually would in a production environment. Leakage is often subtle and indirect, making it difficult to detect and eliminate. It can lead a statistician or modeler to select a suboptimal model, which may be outperformed by a leakage-free alternative. == Leakage modes == Leakage can occur at multiple stages of the machine learning workflow. Broadly, its sources can be divided into two categories: those arising from features and those arising from training examples. === Feature leakage === Feature or column-wise leakage is caused by the inclusion of columns which are one of the following: a duplicate label, a proxy for the label, or the label itself. These features, known as anachronisms, will not be available when the model is used for predictions, and result in leakage if included when the model is trained. For example, including a "MonthlySalary" column when predicting "YearlySalary"; or "MinutesLate" when predicting "IsLate". === Training example leakage === Row-wise leakage is caused by improper sharing of information between rows of data. Types of row-wise leakage include: Premature featurization; leaking from premature featurization before Cross-validation/Train/Test split (must fit MinMax/ngrams/etc on only the train split, then transform the test set) Duplicate rows between train/validation/test (for example, oversampling a dataset to pad its size before splitting; or, different rotations/augmentations of a single image; bootstrap sampling before splitting; or duplicating rows to up sample the minority class) Non-independent and identically distributed random (non-IID) data Time leakage (for example, splitting a time-series dataset randomly instead of newer data in test set using a train/test split or rolling-origin cross-validation) Group leakage—not including a grouping split column (for example, Andrew Ng's group had 100k x-rays of 30k patients, meaning ~3 images per patient. The paper used random splitting instead of ensuring that all images of a patient were in the same split. Hence the model partially memorized the patients instead of learning to recognize pneumonia in chest x-rays.) A 2023 review found data leakage to be "a widespread failure mode in machine-learning (ML)-based science", having affected at least 294 academic publications across 17 disciplines, and causing a potential reproducibility crisis. == Detection == Data leakage in machine learning can be detected through various methods, focusing on performance analysis, feature examination, data auditing, and model behavior analysis. Performance-wise, unusually high accuracy or significant discrepancies between training and test results often indicate leakage. Inconsistent cross-validation outcomes may also signal issues. Feature examination involves scrutinizing feature importance rankings and ensuring temporal integrity in time series data. A thorough audit of the data pipeline is crucial, reviewing pre-processing steps, feature engineering, and data splitting processes. Detecting duplicate entries across dataset splits is also important. For language models, the Min-K% method can detect the presence of data in a pretraining dataset. It presents a sentence suspected to be present in the pretraining dataset, and computes the log-likelihood of each token, then compute the average of the lowest K of these. If this exceeds a threshold, then the sentence is likely present. This method is improved by comparing against a baseline of the mean and variance. Analyzing model behavior can reveal leakage. Models relying heavily on counter-intuitive features or showing unexpected prediction patterns warrant investigation. Performance degradation over time when tested on new data may suggest earlier inflated metrics due to leakage. Advanced techniques include backward feature elimination, where suspicious features are temporarily removed to observe performance changes. Using a separate hold-out dataset for final validation before deployment is advisable.

  Read more →
• 

  Sparkles emoji

  The Sparkles emoji (U+2728 ✨ SPARKLES) is an emoji that has one large star surrounded by smaller stars. Originating from Japan to represent sparkles used in anime and manga, the sparkles are often used as emphasis in text by surrounding words or phrases with it. It is the third most-used emoji in the world on Twitter as of 2021. Since the early 2020s it has been used by major software companies to represent artificial intelligence, marketing the technology as "like magic". == Development == According to Emojipedia, the Sparkles emoji was first used by Japanese mobile operators SoftBank, Docomo and au in the late 1990s. The emoji was added to Unicode 6.0 in 2010 and Emoji 1.0 in 2015. On some platforms the Sparkles emoji has been multicoloured whilst on other platforms it has been one colour. Twitter and Microsoft's Sparkles have changed from being multicoloured to being a single colour. Samsung's version of the emoji previously had a night sky in the background. == Usage == === Interpersonal communication === The Sparkles emoji was originally meant to represent the usage of sparkles in Japanese anime and manga, where the sparkles are used to represent beauty, happiness or awe. The emoji has several meanings and depends upon context. Starting in the late 2010s, the emoji started being used to surround words or phrases to be used as emphasis, an example from the book Because Internet being "I would simply ✨pass away✨". It can also be used as sarcasm, irony or as a way to mock people. Without emoji this could be represented with tildes or asterisks, for example, "~tildes~" or "~asterisk plus tilde~" or "~~true sparkle exuberance~~". The sparkles emoji can be used to represent stars in text, be used to represent cleanliness or can be used to mean "orgasm" whilst sexting. In September 2021 the Sparkles emoji overtook the Pleading Face (🥺) emoji to become the third most-used emoji in the world according to Emojipedia, with approximately 1 per cent of all tweets containing the Sparkles emoji. === Artificial intelligence === In the early 2020s, the Sparkles emoji started being used as an icon to represent artificial intelligence (AI). Companies who use the emoji this way include Google, OpenAI, Samsung, Microsoft, Adobe, Spotify and Zoom. As of August 2024, seven of the top 10 software companies by market capitalisation use the Sparkles emojis with AI. OpenAI has different versions of the Sparkles for different versions of the models that ChatGPT uses. One explanation is that Sparkles is being used by these companies as a way to market AI as "magic". Marketing technology as "magic" has been used before AI, particularly by Apple. Another explanation given by designers and marketers choosing to use Sparkles to signify AI is simply that other platforms are doing it, making it familiar to users. Around 2024, some of these companies started removing two of the smaller stars from the emoji in their AI services and have kept the one large star, an example being Google's Gemini chatbot. In early 2024, the Nielsen Norman Group provided test subjects with the star in isolation and found that people did not associate the symbol with AI, but instead mostly with "optimisation" or "favourite or save an item".

  Read more →
• 

  Symbolic artificial intelligence

  In artificial intelligence, symbolic artificial intelligence (also known as classical artificial intelligence or logic-based artificial intelligence) is the term for the collection of all methods in artificial intelligence research that are based on high-level symbolic (human-readable) representations of problems, logic, and search. Symbolic AI used tools such as logic programming, production rules, semantic nets and frames, and it developed applications such as knowledge-based systems (in particular, expert systems), symbolic mathematics, automated theorem provers, ontologies, the semantic web, and automated planning and scheduling systems. The Symbolic AI paradigm led to important ideas in search, symbolic programming languages, agents, multi-agent systems, the semantic web, and the strengths and limitations of formal knowledge and reasoning systems. Symbolic AI was the dominant paradigm of AI research from the mid-1950s until the mid-1990s. Researchers in the 1960s and the 1970s were convinced that symbolic approaches would eventually succeed in creating a machine with artificial general intelligence and considered this the ultimate goal of their field. An early boom, with early successes such as the Logic Theorist and Samuel's Checkers Playing Program, led to unrealistic expectations and promises and was followed by the first AI Winter as funding dried up. A second boom (1969–1986) occurred with the rise of expert systems, their promise of capturing corporate expertise, and an enthusiastic corporate embrace. That boom, and some early successes, e.g., with XCON at DEC, was followed again by later disappointment. Problems with difficulties in knowledge acquisition, maintaining large knowledge bases, and brittleness in handling out-of-domain problems arose. Another, second, AI Winter (1988–2011) followed. Subsequently, AI researchers focused on addressing underlying problems in handling uncertainty and in knowledge acquisition. Uncertainty was addressed with formal methods such as hidden Markov models, Bayesian reasoning, and statistical relational learning. Symbolic machine learning addressed the knowledge acquisition problem with contributions including Version Space, Valiant's PAC learning, Quinlan's ID3 decision-tree learning, case-based learning, and inductive logic programming to learn relations. Neural networks, a subsymbolic approach, had been pursued from early days and reemerged strongly in 2012. Early examples are Rosenblatt's perceptron learning work, the backpropagation work of Rumelhart, Hinton and Williams, and work in convolutional neural networks by LeCun et al. in 1989. However, neural networks were not viewed as successful until about 2012: "Until Big Data became commonplace, the general consensus in the Al community was that the so-called neural-network approach was hopeless. Systems just didn't work that well, compared to other methods. ... A revolution came in 2012, when a number of people, including a team of researchers working with Hinton, worked out a way to use the power of GPUs to enormously increase the power of neural networks." Over the next several years, deep learning had spectacular success in handling vision, speech recognition, speech synthesis, image generation, and machine translation, though symbolic approaches continue to be useful in a few domains such as computer algebra systems and proof assistants. == History == A short history of symbolic AI to the present day follows below. Time periods and titles are drawn from Henry Kautz's 2020 AAAI Robert S. Engelmore Memorial Lecture and the longer Wikipedia article on the History of AI, with dates and titles differing slightly for increased clarity. === The first AI summer: irrational exuberance, 1948–1966 === Success at early attempts in AI occurred in three main areas: artificial neural networks, knowledge representation, and heuristic search, contributing to high expectations. This section summarizes Kautz's reprise of early AI history. ==== Approaches inspired by human or animal cognition or behavior ==== Cybernetic approaches attempted to replicate the feedback loops between animals and their environments. A robotic turtle, with sensors, motors for driving and steering, and seven vacuum tubes for control, based on a preprogrammed neural net, was built as early as 1948. This work can be seen as an early precursor to later work in neural networks, reinforcement learning, and situated robotics. An important early symbolic AI program was the Logic theorist, written by Allen Newell, Herbert Simon and Cliff Shaw in 1955–56, as it was able to prove 38 elementary theorems from Whitehead and Russell's Principia Mathematica. Newell, Simon, and Shaw later generalized this work to create a domain-independent problem solver, GPS (General Problem Solver). GPS solved problems represented with formal operators via state-space search using means-ends analysis. During the 1960s, symbolic approaches achieved great success at simulating intelligent behavior in structured environments such as game-playing, symbolic mathematics, and theorem-proving. AI research was concentrated in four institutions in the 1960s: Carnegie Mellon University, Stanford, MIT and (later) University of Edinburgh. Each one developed its own style of research. Earlier approaches based on cybernetics or artificial neural networks were abandoned or pushed into the background. Herbert Simon and Allen Newell studied human problem-solving skills and attempted to formalize them, and their work laid the foundations of the field of artificial intelligence, as well as cognitive science, operations research and management science. Their research team used the results of psychological experiments to develop programs that simulated the techniques that people used to solve problems. This tradition, centered at Carnegie Mellon University would eventually culminate in the development of the Soar architecture in the middle 1980s. ==== Heuristic search ==== In addition to the highly specialized domain-specific kinds of knowledge that we will see later used in expert systems, early symbolic AI researchers discovered another more general application of knowledge. These were called heuristics, rules of thumb that guide a search in promising directions: "How can non-enumerative search be practical when the underlying problem is exponentially hard? The approach advocated by Simon and Newell is to employ heuristics: fast algorithms that may fail on some inputs or output suboptimal solutions." Another important advance was to find a way to apply these heuristics that guarantees a solution will be found, if there is one, not withstanding the occasional fallibility of heuristics: "The A algorithm provided a general frame for complete and optimal heuristically guided search. A is used as a subroutine within practically every AI algorithm today but is still no magic bullet; its guarantee of completeness is bought at the cost of worst-case exponential time. ==== Early work on knowledge representation and reasoning ==== Early work covered both applications of formal reasoning emphasizing first-order logic, along with attempts to handle common-sense reasoning in a less formal manner. ===== Modeling formal reasoning with logic: the "neats" ===== Unlike Simon and Newell, John McCarthy felt that machines did not need to simulate the exact mechanisms of human thought, but could instead try to find the essence of abstract reasoning and problem-solving with logic, regardless of whether people used the same algorithms. His laboratory at Stanford (SAIL) focused on using formal logic to solve a wide variety of problems, including knowledge representation, planning and learning. Logic was also the focus of the work at the University of Edinburgh and elsewhere in Europe which led to the development of the programming language Prolog and the science of logic programming. ===== Modeling implicit common-sense knowledge with frames and scripts: the "scruffies" ===== Researchers at MIT (such as Marvin Minsky and Seymour Papert) found that solving difficult problems in vision and natural language processing required ad hoc solutions—they argued that no simple and general principle (like logic) would capture all the aspects of intelligent behavior. Roger Schank described their "anti-logic" approaches as "scruffy" (as opposed to the "neat" paradigms at CMU and Stanford). Commonsense knowledge bases (such as Doug Lenat's Cyc) are an example of "scruffy" AI, since they must be built by hand, one complicated concept at a time. === The first AI winter: crushed dreams, 1967–1977 === The first AI winter was a shock: During the first AI summer, many people thought that machine intelligence could be achieved in just a few years. The Defense Advance Research Projects Agency (DARPA) launched programs to support AI research to use AI to solve problems of national security; in particular, to automate the translation of Russian to English for inte

  Read more →
• 

  Expectation propagation

  Expectation propagation (EP) is a technique in Bayesian machine learning. EP finds approximations to a probability distribution. It uses an iterative approach that uses the factorization structure of the target distribution. It differs from other Bayesian approximation approaches such as variational Bayesian methods. More specifically, suppose we wish to approximate an intractable probability distribution p ( x ) {\displaystyle p(\mathbf {x} )} with a tractable distribution q ( x ) {\displaystyle q(\mathbf {x} )} . Expectation propagation achieves this approximation by minimizing the Kullback–Leibler divergence K L ( p | | q ) {\displaystyle \mathrm {KL} (p||q)} . Variational Bayesian methods minimize K L ( q | | p ) {\displaystyle \mathrm {KL} (q||p)} instead. If q ( x ) {\displaystyle q(\mathbf {x} )} is a Gaussian N ( x | μ , Σ ) {\displaystyle {\mathcal {N}}(\mathbf {x} |\mu ,\Sigma )} , then K L ( p | | q ) {\displaystyle \mathrm {KL} (p||q)} is minimized with μ {\displaystyle \mu } and Σ {\displaystyle \Sigma } being equal to the mean of p ( x ) {\displaystyle p(\mathbf {x} )} and the covariance of p ( x ) {\displaystyle p(\mathbf {x} )} , respectively; this is called moment matching. == Applications == Expectation propagation via moment matching plays a vital role in approximation for indicator functions that appear when deriving the message passing equations for TrueSkill.

  Read more →
• 

  Matrix regularization

  In the field of statistical learning theory, matrix regularization generalizes notions of vector regularization to cases where the object to be learned is a matrix. The purpose of regularization is to enforce conditions, for example sparsity or smoothness, that can produce stable predictive functions. For example, in the more common vector framework, Tikhonov regularization optimizes over min x ‖ A x − y ‖ 2 + λ ‖ x ‖ 2 {\displaystyle \min _{x}\left\|Ax-y\right\|^{2}+\lambda \left\|x\right\|^{2}} to find a vector x {\displaystyle x} that is a stable solution to the regression problem. When the system is described by a matrix rather than a vector, this problem can be written as min X ‖ A X − Y ‖ 2 + λ ‖ X ‖ 2 , {\displaystyle \min _{X}\left\|AX-Y\right\|^{2}+\lambda \left\|X\right\|^{2},} where the vector norm enforcing a regularization penalty on x {\displaystyle x} has been extended to a matrix norm on X {\displaystyle X} . Matrix regularization has applications in matrix completion, multivariate regression, and multi-task learning. Ideas of feature and group selection can also be extended to matrices, and these can be generalized to the nonparametric case of multiple kernel learning. == Basic definition == Consider a matrix W {\displaystyle W} to be learned from a set of examples, S = ( X i t , y i t ) {\displaystyle S=(X_{i}^{t},y_{i}^{t})} , where i {\displaystyle i} goes from 1 {\displaystyle 1} to n {\displaystyle n} , and t {\displaystyle t} goes from 1 {\displaystyle 1} to T {\displaystyle T} . Let each input matrix X i {\displaystyle X_{i}} be ∈ R D T {\displaystyle \in \mathbb {R} ^{DT}} , and let W {\displaystyle W} be of size D × T {\displaystyle D\times T} . A general model for the output y {\displaystyle y} can be posed as y i t = ⟨ W , X i t ⟩ F , {\displaystyle y_{i}^{t}=\left\langle W,X_{i}^{t}\right\rangle _{F},} where the inner product is the Frobenius inner product. For different applications the matrices X i {\displaystyle X_{i}} will have different forms, but for each of these the optimization problem to infer W {\displaystyle W} can be written as min W ∈ H E ( W ) + R ( W ) , {\displaystyle \min _{W\in {\mathcal {H}}}E(W)+R(W),} where E {\displaystyle E} defines the empirical error for a given W {\displaystyle W} , and R ( W ) {\displaystyle R(W)} is a matrix regularization penalty. The function R ( W ) {\displaystyle R(W)} is typically chosen to be convex and is often selected to enforce sparsity (using ℓ 1 {\displaystyle \ell ^{1}} -norms) and/or smoothness (using ℓ 2 {\displaystyle \ell ^{2}} -norms). Finally, W {\displaystyle W} is in the space of matrices H {\displaystyle {\mathcal {H}}} with Frobenius inner product ⟨ … ⟩ F {\displaystyle \langle \dots \rangle _{F}} . == General applications == === Matrix completion === In the problem of matrix completion, the matrix X i t {\displaystyle X_{i}^{t}} takes the form X i t = e t ⊗ e i ′ , {\displaystyle X_{i}^{t}=e_{t}\otimes e_{i}',} where ( e t ) t {\displaystyle (e_{t})_{t}} and ( e i ′ ) i {\displaystyle (e_{i}')_{i}} are the canonical basis in R T {\displaystyle \mathbb {R} ^{T}} and R D {\displaystyle \mathbb {R} ^{D}} . In this case the role of the Frobenius inner product is to select individual elements w i t {\displaystyle w_{i}^{t}} from the matrix W {\displaystyle W} . Thus, the output y {\displaystyle y} is a sampling of entries from the matrix W {\displaystyle W} . The problem of reconstructing W {\displaystyle W} from a small set of sampled entries is possible only under certain restrictions on the matrix, and these restrictions can be enforced by a regularization function. For example, it might be assumed that W {\displaystyle W} is low-rank, in which case the regularization penalty can take the form of a nuclear norm. R ( W ) = λ ‖ W ‖ ∗ = λ ∑ i | σ i | , {\displaystyle R(W)=\lambda \left\|W\right\|_{}=\lambda \sum _{i}\left|\sigma _{i}\right|,} where σ i {\displaystyle \sigma _{i}} , with i {\displaystyle i} from 1 {\displaystyle 1} to min D , T {\displaystyle \min D,T} , are the singular values of W {\displaystyle W} . === Multivariate regression === Models used in multivariate regression are parameterized by a matrix of coefficients. In the Frobenius inner product above, each matrix X {\displaystyle X} is X i t = e t ⊗ x i {\displaystyle X_{i}^{t}=e_{t}\otimes x_{i}} such that the output of the inner product is the dot product of one row of the input with one column of the coefficient matrix. The familiar form of such models is Y = X W + b {\displaystyle Y=XW+b} Many of the vector norms used in single variable regression can be extended to the multivariate case. One example is the squared Frobenius norm, which can be viewed as an ℓ 2 {\displaystyle \ell ^{2}} -norm acting either entrywise, or on the singular values of the matrix: R ( W ) = λ ‖ W ‖ F 2 = λ ∑ i ∑ j | w i j | 2 = λ Tr ⁡ ( W ∗ W ) = λ ∑ i σ i 2 . {\displaystyle R(W)=\lambda \left\|W\right\|_{F}^{2}=\lambda \sum _{i}\sum _{j}\left|w_{ij}\right|^{2}=\lambda \operatorname {Tr} \left(W^{}W\right)=\lambda \sum _{i}\sigma _{i}^{2}.} In the multivariate case the effect of regularizing with the Frobenius norm is the same as the vector case; very complex models will have larger norms, and, thus, will be penalized more. === Multi-task learning === The setup for multi-task learning is almost the same as the setup for multivariate regression. The primary difference is that the input variables are also indexed by task (columns of Y {\displaystyle Y} ). The representation with the Frobenius inner product is then X i t = e t ⊗ x i t . {\displaystyle X_{i}^{t}=e_{t}\otimes x_{i}^{t}.} The role of matrix regularization in this setting can be the same as in multivariate regression, but matrix norms can also be used to couple learning problems across tasks. In particular, note that for the optimization problem min W ‖ X W − Y ‖ 2 2 + λ ‖ W ‖ 2 2 {\displaystyle \min _{W}\left\|XW-Y\right\|_{2}^{2}+\lambda \left\|W\right\|_{2}^{2}} the solutions corresponding to each column of Y {\displaystyle Y} are decoupled. That is, the same solution can be found by solving the joint problem, or by solving an isolated regression problem for each column. The problems can be coupled by adding an additional regularization penalty on the covariance of solutions min W , Ω ‖ X W − Y ‖ 2 2 + λ 1 ‖ W ‖ 2 2 + λ 2 Tr ⁡ ( W T Ω − 1 W ) {\displaystyle \min _{W,\Omega }\left\|XW-Y\right\|_{2}^{2}+\lambda _{1}\left\|W\right\|_{2}^{2}+\lambda _{2}\operatorname {Tr} \left(W^{T}\Omega ^{-1}W\right)} where Ω {\displaystyle \Omega } models the relationship between tasks. This scheme can be used to both enforce similarity of solutions across tasks, and to learn the specific structure of task similarity by alternating between optimizations of W {\displaystyle W} and Ω {\displaystyle \Omega } . When the relationship between tasks is known to lie on a graph, the Laplacian matrix of the graph can be used to couple the learning problems. == Spectral regularization == Regularization by spectral filtering has been used to find stable solutions to problems such as those discussed above by addressing ill-posed matrix inversions (see for example Filter function for Tikhonov regularization). In many cases the regularization function acts on the input (or kernel) to ensure a bounded inverse by eliminating small singular values, but it can also be useful to have spectral norms that act on the matrix that is to be learned. There are a number of matrix norms that act on the singular values of the matrix. Frequently used examples include the Schatten p-norms, with p = 1 or 2. For example, matrix regularization with a Schatten 1-norm, also called the nuclear norm, can be used to enforce sparsity in the spectrum of a matrix. This has been used in the context of matrix completion when the matrix in question is believed to have a restricted rank. In this case the optimization problem becomes: min ‖ W ‖ ∗ subject to W i , j = Y i j . {\displaystyle \min \left\|W\right\|_{}~~{\text{ subject to }}~~W_{i,j}=Y_{ij}.} Spectral Regularization is also used to enforce a reduced rank coefficient matrix in multivariate regression. In this setting, a reduced rank coefficient matrix can be found by keeping just the top n {\displaystyle n} singular values, but this can be extended to keep any reduced set of singular values and vectors. == Structured sparsity == Sparse optimization has become the focus of much research interest as a way to find solutions that depend on a small number of variables (see e.g. the Lasso method). In principle, entry-wise sparsity can be enforced by penalizing the entry-wise ℓ 0 {\displaystyle \ell ^{0}} -norm of the matrix, but the ℓ 0 {\displaystyle \ell ^{0}} -norm is not convex. In practice this can be implemented by convex relaxation to the ℓ 1 {\displaystyle \ell ^{1}} -norm. While entry-wise regularization with an ℓ 1 {\displaystyle \ell ^{1}} -norm will find solutions with a small number of nonzero elements, applying an ℓ 1 {

  Read more →
• 

  Histogram of oriented displacements

  Histogram of oriented displacements (HOD) is a 2D trajectory descriptor. The trajectory is described using a histogram of the directions between each two consecutive points. Given a trajectory T = {P1, P2, P3, ..., Pn}, where Pt is the 2D position at time t. For each pair of positions Pt and Pt+1, calculate the direction angle θ(t, t+1). Value of θ is between 0 and 360. A histogram of the quantized values of θ is created. If the histogram is of 8 bins, the first bin represents all θs between 0 and 45. The histogram accumulates the lengths of the consecutive moves. For each θ, a specific histogram bin is determined. The length of the line between Pt and Pt+1 is then added to the specific histogram bin. To show the intuition behind the descriptor, consider the action of waving hands. At the end of the action, the hand falls down. When describing this down movement, the descriptor does not care about the position from which the hand started to fall. This fall will affect the histogram with the appropriate angles and lengths, regardless of the position where the hand started to fall. HOD records for each moving point: how much it moves in each range of directions. HOD has a clear physical interpretation. It proposes that, a simple way to describe the motion of an object, is to indicate how much distance it moves in each direction. If the movement in all directions are saved accurately, the movement can be repeated from the initial position to the final destination regardless of the displacements order. However, the temporal information will be lost, as the order of movements is not stored-this is what we solve by applying the temporal pyramid, as shown in section \ref{sec:temp-pyramid}. If the angles quantization range is small, classifiers that use the descriptor will overfit. Generalization needs some slack in directions-which can be done by increasing the quantization range.

  Read more →