AI Headshot Generator Free Reddit

AI Headshot Generator Free Reddit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Radar geo-warping

  Radar geo-warping is the adjustment of geo-referenced radar images and video data to be consistent with a geographical projection. This image warping avoids any restrictions when displaying it together with video from multiple radar sources or with other geographical data including scanned maps and satellite images which may be provided in a particular projection. There are many areas where geo warping has unique benefits: Single radar video signal displayed together with maps of different geographical projections. E.g. Mercator UTM stereographic Multiple radar video signals displayed simultaneously: Having the computing power to do so on one computer. Adapting the projection of all radar signals allowing the geographically correct display and accurate superimposition of those videos. Slant range correction: a modern 3D radar system can measure the height of a target and hence it is possible to correct the radar video by the real corrected range of the target. Slant Range Correction also allows to compensate the radar tower height e.g. for maritime surveillance radars. == Introduction == Radar video presents the echoes of electromagnetic waves a radar system has emitted and received as reflections afterwards. These echoes are typically presented on a computer screen with a color-coding scheme depicting the reflection strength. Two problems have to be solved during such a visualization process. The first problem arises from the fact that typically the radar antenna turns around its position and measures the reflection echo distances from its position in one direction. This effectively means that the radar video data are present in polar coordinates. In older systems the polar oriented picture has been displayed in so called plan position indicators (PPI). The PPI-scope uses a radial sweep pivoting about the center of the presentation. This results in a map-like picture of the area covered by the radar beam. A long-persistence screen is used so that the display remains visible until the sweep passes again. Bearing to the target is indicated by the target's angular position in relation to an imaginary line extending vertically from the sweep origin to the top of the scope. The top of the scope is either true north (when the indicator is operated in the true bearing mode) or ship's heading (when the indicator is operated in the relative bearing mode). For visualization on a modern computer screen the polar coordinates have to be converted into Cartesian coordinates. This process called radar scan conversion is presented with more detail in the next section. The second problem to solve arises from the fact that a radar system is placed in the real world and measures real world echo positions. These echoes have to be displayed together with other real world data like object positions, vector maps and satellite images in a consistent way. All this information refers to the curved earth surface but is displayed on a flat computer display. Building a link from real world earth positions to display pixels is commonly called geographical referencing or in short geo-referencing. Part of the geo-referencing process is to map the 3D earth surface onto a 2D display. This process of a geographical projection can be performed in many ways, but different data sources have their own 'natural' projection. E.g. Cartesian radar video data from a radar source on the earth surface are geo-referenced by a so-called radar projection. When using this radar projection the Cartesian radar video pixels can directly displayed on a computer screen (only being linearly transformed according to the current position on the screen and e.g. the current zoom level). A problem now arises if e.g. also a satellite map shall be shown together with the radar video data. The 'natural' geographical projection of a satellite image would be a satellite projection which depends on the satellite orbit, position and further parameters. Now either the satellite image has to be reprojected to a radar projection or the radar video has to use the satellite projection. This geographical re-projection is also called geographical warping or Geo Warping where each image pixel has to be transformed from one projection into another. This article describes in further detail the Geo Warping of radar video images in real time. It will also show that radar video Geo Warping is done most efficiently when it is integrated with the radar scan conversion process. == Radar-scan conversion == This section describes the principles of the radar-scan conversion (RSC) process. The radar supplies its measured data in polar coordinates (ρ,θ) directly from the rotating antenna. ρ defines the target/echo distance and θ the target angle in polar world coordinates. These data are measured, digitized and stored in a polar coordinate polar store or polar pixmap. The main RSC task is to convert these data to Cartesian (x, y) display coordinates, creating the necessary display pixels. The RSC process is influenced by the current zoom, shift and rotation settings defining which part of the 'world' shall be visible in the display image. As detailed later the RSC process also takes the currently used geographical projection into account when the radar video images are Geo Warped. The OpenGL RSC is implemented using a reverse scan conversion approach which calculates for every image pixel the most appropriate radar amplitude value in the polar store. This approach generates an optimal image without any artifacts known from forward spoke fill algorithms. By applying bi-linear filtering between adjacent pixels in the polar store during the conversion process the OpenGL RSC finally achieves a very high visual quality radar display image for every zoom level, creating smooth images of the radar echoes. == Radar projection == This section illustrates how radar video data are geo referenced and displayed on a computer screen. The radar sensor is positioned on the earth surface with a height h above the ground. It measures the direct distance d to the target (and not e.g. the distance the target is away from the radar if one would move on the earth surface). This distance is then used in the display plane after adjustment to the current display zoom level by the radar scan converter (RSC). Now it has to be clarified how the radar video data is geo referenced. This basically means, that if we want to display a geographical real world object (like e.g. a light house) which is at the same real world position as the radar target, that it also shall appear at the same position in the display plane. This is realized by calculating the distance from the radar sensor to the respective real world object and use that distance in the display plane. The position of the real world object is typically given in geographical coordinates (latitude, longitude and height above the earth surface). In other words, using a radar projection with geographical data is done by simulating a radar measurement process with the real world objects and use the resulting range and azimuth in the display plane. The second picture to the right shows an example radar projection with the center of projection (COP) at latitude 50.0° and longitude 0.0° which is also the radar position. The dashed lines are the equal-latitude and equal-longitude lines on top of the background map. The solid lines show equal-range and equal-azimuth with the respect to the radar position. It is a feature of the radar projection that equal-range lines are circles and equal-azimuth lines are straight lines. This is necessary to display radar video consistently with other map data when using a radar projection where the projection center has to be the radar position. == Geo Warping process == This section explains the actual geo warping or re-projection process when applied to radar video in real time. Assume we want to display radar video on top of a satellite image. As an example we use the CIB projection which is used to display satellite data in CIB (Controlled Image Base) format. The Figure Geo Warping Radar to CIB Projection shows dashed the maximal range circle for a range of 111 km or 60 miles using the radar projection. Such a range is typical for long range coastal surveillance radars. As stated in the last section this is a perfect circle also on the computer screen. The solid line ellipse shows the same range circle for the CIB projection. Typically the errors occurring without Geo Warping are smallest near the radar position if at least the projection center (COP) coincides with the radar position, as realized in our example. Otherwise the error distribution depends both on the used projection and also on the projection parameters. Thus, in our case the errors are most significant near the maximum radar range. The CIB projection error corrected in east–west direction at half the radar range is 2.6 km and is 5.3 km at the full radar range of 111 km. An error of 5.3 km is

  Read more →
• 

  Underwater computer vision

  Underwater computer vision is a subfield of computer vision. In recent years, with the development of underwater vehicles ( ROV, AUV, gliders), the need to be able to record and process huge amounts of information has become increasingly important. Applications range from inspection of underwater structures for the offshore industry to the identification and counting of fishes for biological research. However, no matter how big the impact of this technology can be to industry and research, it still is in a very early stage of development compared to traditional computer vision. One reason for this is that, the moment the camera goes into the water, a whole new set of challenges appear. On one hand, cameras have to be made waterproof, marine corrosion deteriorates materials quickly and access and modifications to experimental setups are costly, both in time and resources. On the other hand, the physical properties of the water make light behave differently, changing the appearance of a same object with variations of depth, organic material, currents, temperature etc. == Applications == Seafloor survey Vehicle navigation and positioning Biological monitoring {possibly aquatic biomonitoring) Video mosaics as visual navigation maps Submarine pipeline inspection Wreckage visualization Maintenance of underwater structures Drowning detection systems == Medium differences == === Illumination === In air, light comes from the whole hemisphere on cloudy days, and is dominated by the sun. In water direct lighting comes from a cone about 96° wide above the scene. This phenomenon is called Snell's window. Artificial lighting can be used where natural light levels are insufficient and where the light path is too long to produce acceptable colour, as the loss of colour is a function of the total distance through water from the source to the camera lens port. === Light attenuation === Unlike air, water attenuates light exponentially. This results in hazy images with very low contrast. The main reasons for light attenuation are light absorption (where energy is removed from the light) and light scattering, by which the direction of light is changed. Light scattering can further be divided into forward scattering, which results in an increased blurriness and backward scattering that limits the contrast and is responsible for the characteristic veil of underwater images. Both scattering and attenuation are heavily influenced by the amount of organic matter dissolved or suspended in the water. Light attenuation in water is also a function of the wavelength. This means that different colours are attenuated at different rates, leading to colour degradation.with depth and distance. Red and orange light are attenuated faster, followed by yellows and greens. Blue is the least attenuated visible wavelength. === Artificial lighting === == Challenges == In high level computer vision, human structures are frequently used as image features for image matching in different applications. However, the sea bottom lacks such features, making it hard to find correspondences in two images. In order to be able to use a camera in the water, a watertight housing is required. However, refraction will happen at the water-glass and glass-air interface due to differences in density of the materials. This has the effect of introducing a non-linear image deformation. The motion of the vehicle presents another special challenge. Underwater vehicles are constantly moving due to currents and other phenomena. This introduces another uncertainty to algorithms, where small motions may appear in all directions. This can be specially important for video tracking. In order to reduce this problem image stabilization algorithms may be applied. == Relevant technology == === Image restoration === Image restoration< techniques are intended to model the degradation process and then invert it, obtaining the new image after solving. It is generally a complex approach that requires plenty of parameters that vary a lot between different water conditions. === Image enhancement === Image enhancement only tries to provide a visually more appealing image without taking the physical image formation process into account. These methods are usually simpler and less computational intensive. === Color correction === Various algorithms exist that perform automatic color correction. The UCM (Unsupervised Color Correction Method), for example, does this in the following steps: It firstly reduces the color cast by equalizing the color values. Then it enhances contrast by stretching the red histogram towards the maximum and finally saturation and intensity components are optimized. == Underwater stereo vision == It is usually assumed that stereo cameras have been calibrated previously, geometrically and radiometrically. This leads to the assumption that corresponding pixels should have the same color. However this can not be guaranteed in an underwater scene, because of dispersion and backscatter. However, it is possible to digitally model this phenomenon and create a virtual image with those effects removed == Other application fields == Imaging sonars have become more and more accessible and gained resolution, delivering better images. Sidescan sonars are used to produce complete maps of regions of the sea floor stitching together sequences of sonar images. However, sonar images often lack proper contrast and are degraded by artefacts and distortions due to noise, attitude changes of the AUV/ROV carrying the sonar or non uniform beam patterns. Another common problem with sonar computer vision is the comparatively low frame rate of sonar images.

  Read more →
• 

  GPT-4Chan

  Generative Pre-trained Transformer 4Chan (GPT-4chan) is a controversial AI model that was developed and deployed by YouTuber and AI researcher Yannic Kilcher in June 2022. The model is a large language model, which means it can generate text based on some input, by fine-tuning GPT-J with a dataset of millions of posts from the /pol/ board of 4chan, an anonymous online forum known for occasionally hosting hateful and extremist content. The model learned to mimic the style and tone of /pol/ users, producing text that is often intentionally offensive to groups (racist, sexist, homophobic, etc.) and nihilistic. Kilcher deployed the model on the /pol/ board itself, where it interacted with other users without revealing its identity. He also made the model publicly available on Hugging Face, a platform for sharing and using AI models, until it was removed from the platform. The project sparked criticism and debate in the AI community. Some people questioned the ethics, legality, and social impact of creating and distributing such a model. Some of the issues raised by the GPT-4chan controversy include the potential harm of spreading hate speech, the responsibility of AI developers and platforms, the need for regulation and oversight of AI models, and the role of open source and transparency in AI research. == Development == The development of GPT-4chan began in May 2022, when Kilcher announced his project on his YouTube channel. Notably, at the time before ChatGPT, he explained that he wanted to create a large language model that could generate realistic and coherent text in the style of /pol/, one of the most notorious online communities. He indicated that he was inspired by the success of GPT-3, a powerful AI model created by OpenAI, and GPT-J, an open-source model, with GPT-3 comparable performance, released by EleutherAI, a group of independent AI researchers. Kilcher decided to use GPT-J as the base model for his project, and fine-tune it with a large dataset of /pol/ posts. The Raiders of the Lost Kek dataset contained over 100 million posts from /pol/, spanning from June 2016-November 2019. Kilcher then proceeded to fine-tune the GPT-J model on the 4chan data. He also showed some examples of the model’s outputs, which ranged from political opinions, conspiracy theories, jokes, insults, and threats, to more creative and bizarre texts, such as poems, stories, songs, and code. He said that he was impressed by the model’s ability to generate fluent and diverse text, and that he was curious to see how it would interact with real /pol/ users. == Release == In June 2022, Kilcher deployed his model on the /pol/ board itself, using a bot that he programmed to post and reply to threads. He did not reveal the model’s identity, and he let it run autonomously, without any human supervision or intervention. He wanted to conduct a natural experiment, and to observe the model’s behavior and impact in a real-world setting. Furthermore, he also wanted to test the model’s robustness, and to see how it would handle the challenges and dynamics of /pol/, such as trolling, flaming, baiting, and moderation. At the same time, Kilcher also made his model publicly available on Hugging Face, a platform for sharing and using AI models. He wanted to share his work with the AI community and the public, and that he hoped that his model would inspire and enable others to create and explore new applications and possibilities with large language models. Likewise, he also said that he wanted to spark a discussion and a debate about the ethical and social implications of his project, and that he welcomed feedback and criticism from anyone. He provided a link to his model’s page on Hugging Face, where anyone could access and use the model through a web interface or an API, and also provided a link to his GitHub repository, where anyone could download and inspect the model’s code and data. == Controversy == The release of GPT-4chan to the public caused a lot of reactions and responses from various audiences. On the /pol/ board, the model’s posts and replies attracted a lot of attention and engagement from other users, who were mostly unaware of the model’s identity and nature. Some users praised the model for its intelligence, creativity, and humor, and agreed with its opinions and views. Some users challenged the model for its ignorance, inconsistency, and absurdity, and disagreed with its claims and arguments. Some users tried to troll, bait, or expose the model, and attempted to trick or test it with various questions and scenarios. The model’s posts and replies also generated a lot of controversy and conflict among the users, who often engaged in heated and violent debates and fights with each other. On Hugging Face, the model’s page received a lot of visits and requests from users who wanted to try out and experiment with the model. The model’s page also received a lot of feedback and reviews from users who rated and commented on the model. However, with the controversy of the model, access to it was gated and then disabled on Hugging Face for concerns about the potential harm the model could cause. The incident was notable for the direct intervention of CEO Clément Delangue in the talk pages, a very unusual occurrence compared to the normal practices of content moderation. The release of GPT-4chan also sparked a lot of media coverage and public attention, as various news outlets and social media platforms reported and commented on the model’s project. On YouTube, the model’s video received a lot of views and interactions from viewers who watched and followed the project. Furthermore, a petition condemning the deployment of GPT-4chan gained over 300 signatures from technology experts.

  Read more →
• 

  VLLM

  vLLM is an open-source software framework for inference and serving of large language models and related multimodal models. Originally developed at the University of California, Berkeley's Sky Computing Lab, the project is centered on PagedAttention, a memory-management method for transformer key–value caches, and supports features such as continuous batching, distributed inference, quantization, and OpenAI-compatible APIs. According to a project maintainer, the "v" in vLLM originally referred to "virtual", inspired by virtual memory. == History == vLLM was introduced in 2023 by researchers affiliated with the Sky Computing Lab at UC Berkeley. Its core ideas were described in the 2023 paper Efficient Memory Management for Large Language Model Serving with PagedAttention, which presented the system as a high-throughput and memory-efficient serving engine for large language models. In 2025, the PyTorch Foundation announced that vLLM had become a Foundation-hosted project. PyTorch's project page states that the University of California, Berkeley contributed vLLM to the Linux Foundation in July 2024. In January 2026, TechCrunch reported that the creators of vLLM had launched the startup Inferact to commercialize the project, raising $150 million in seed funding. == Architecture == According to its 2023 paper, vLLM was designed to improve the efficiency of large language model serving by reducing memory waste in the key–value cache used during transformer inference. The paper introduced PagedAttention, an algorithm inspired by virtual memory and paging techniques in operating systems, and described vLLM as using block-level memory management and request scheduling to increase throughput while maintaining similar latency. The project documentation and repository describe support for continuous batching, chunked prefill, speculative decoding, prefix caching, quantization, and multiple forms of distributed inference and serving. PyTorch has described vLLM as a high-throughput, memory-efficient inference and serving engine that supports a range of hardware back ends, including NVIDIA and AMD GPUs, Google TPUs, AWS Trainium, and Intel processors.

  Read more →
• 

  Data remanence

  Data remanence is the residual representation of digital data that remains even after attempts have been made to remove or erase the data. This residue may result from data being left intact by a nominal file deletion operation, by reformatting of storage media that does not remove data previously written to the media, or through physical properties of the storage media that allow previously written data to be recovered. Data remanence may make inadvertent disclosure of sensitive information possible should the storage media be released into an uncontrolled environment (e.g., thrown in refuse containers or lost). Various techniques have been developed to counter data remanence. These techniques are classified as clearing, purging/sanitizing, or destruction. Specific methods include overwriting, degaussing, encryption, and media destruction. Effective application of countermeasures can be complicated by several factors, including media that are inaccessible, media that cannot effectively be erased, advanced storage systems that maintain histories of data throughout the data's life cycle, and persistence of data in memory that is typically considered volatile. Several standards exist for the secure removal of data and the elimination of data remanence. == Causes == Many operating systems, file managers, and other software provide a facility where a file is not immediately deleted when the user requests that action. Instead, the file is moved to a holding area (i.e. the "trash"), making it easy for the user to undo a mistake. Similarly, many software products automatically create backup copies of files that are being edited, to allow the user to restore the original version, or to recover from a possible crash (autosave feature). Even when an explicit deleted file retention facility is not provided or when the user does not use it, operating systems do not actually remove the contents of a file when it is deleted unless they are aware that explicit erasure commands are required, like on a solid-state drive. (In such cases, the operating system will issue the Serial ATA TRIM command or the SCSI UNMAP command to let the drive know to no longer maintain the deleted data.) Instead, they simply remove the file's entry from the file system directory because this requires less work and is therefore faster, and the contents of the file—the actual data—remain on the storage medium. The data will remain there until the operating system reuses the space for new data. In some systems, enough filesystem metadata are also left behind to enable easy undeletion by commonly available utility software. Even when undelete has become impossible, the data, until it has been overwritten, can be read by software that reads disk sectors directly. Computer forensics often employs such software. Likewise, reformatting, repartitioning, or reimaging a system is unlikely to write to every area of the disk, though all will cause the disk to appear empty or, in the case of reimaging, empty except for the files present in the image, to most software. Finally, even when the storage media is overwritten, physical properties of the media may permit recovery of the previous contents. In most cases however, this recovery is not possible by just reading from the storage device in the usual way, but requires using laboratory techniques such as disassembling the device and directly accessing/reading from its components. § Complications below gives further explanations for causes of data remanence. == Countermeasures == There are three levels commonly recognized for eliminating remnant data: === Clearing === Clearing is the removal of sensitive data from storage devices in such a way that there is assurance that the data may not be reconstructed using normal system functions or software file/data recovery utilities. The data may still be recoverable, but not without special laboratory techniques. Clearing is typically an administrative protection against accidental disclosure within an organization. For example, before a hard drive is re-used within an organization, its contents may be cleared to prevent their accidental disclosure to the next user. === Purging === Purging or sanitizing is the physical rewrite of sensitive data from a system or storage device done with the specific intent of rendering the data unrecoverable at a later time. Purging, proportional to the sensitivity of the data, is generally done before releasing media beyond control, such as before discarding old media, or moving media to a computer with different security requirements. === Destruction === The storage media is made unusable for conventional equipment. Effectiveness of destroying the media varies by medium and method. Depending on recording density of the media, and/or the destruction technique, this may leave data recoverable by laboratory methods. Conversely, destruction using appropriate techniques is the most secure method of preventing retrieval. == Specific methods == === Overwriting === A common method used to counter data remanence is to overwrite the storage media with new data. This is often called wiping or shredding a disk or file, by analogy to common methods of destroying print media, although the mechanism bears no similarity to these. Because such a method can often be implemented in software alone, and may be able to selectively target only part of the media, it is a popular, low-cost option for some applications. Overwriting is generally an acceptable method of clearing, as long as the media is writable and not damaged. The simplest overwrite technique writes the same data everywhere—often just a pattern of all zeros. At a minimum, this will prevent the data from being retrieved simply by reading from the media again using standard system functions. The UEFI in modern machines may offer an ATA class disk erase function as well. The ATA-6 standard governs secure erases specifications. Bitlocker is whole disk encryption and illegible without the key. Writing a fresh GPT allows a new file system to be established. Blocks will set empty but LBA read is illegible. New data will be unaffected and work fine. In an attempt to counter more advanced data recovery techniques, specific overwrite patterns and multiple passes have often been prescribed. These may be generic patterns intended to eradicate any trace signatures; an example is the seven-pass pattern 0xF6, 0x00, 0xFF, , 0x00, 0xFF, , sometimes erroneously attributed to US standard DOD 5220.22-M. One challenge with overwriting is that some areas of the disk may be inaccessible, due to media degradation or other errors. Software overwrite may also be problematic in high-security environments, which require stronger controls on data commingling than can be provided by the software in use. The use of advanced storage technologies may also make file-based overwrite ineffective (see the related discussion below under § Complications). There are specialized machines and software that are capable of doing overwriting. The software can sometimes be a standalone operating system specifically designed for data destruction. There are also machines specifically designed to wipe hard drives to the department of defense specifications DOD 5220.22-M. Writing zero to each block on hard disks and SSDs has the advantage of affording the firmware to deploy spare blocks when bad blocks are identified. Bitlocker has the advantage that data is illegible without the key. Seatools and other tools can erase disks with zero which is typical to revive old consumer class disks but they can wipe server disks albeit slowly. Modern 28TB and larger disks have an enormous number of LBA48 blocks. 40TB and 60TB disks will take proportionately longer times to wipe. ==== Feasibility of recovering overwritten data ==== Peter Gutmann investigated data recovery from nominally overwritten media in the mid-1990s. He suggested magnetic force microscopy may be able to recover such data, and developed specific patterns, for specific drive technologies, designed to counter such. These patterns have come to be known as the Gutmann method. Gutmann's belief in the possibility of data recovery is based on many questionable assumptions and factual errors that indicate a low level of understanding of how hard drives work. Daniel Feenberg, an economist at the private National Bureau of Economic Research, claims that the chances of overwritten data being recovered from a modern hard drive amount to "urban legend". He also points to the "18+1⁄2-minute gap" Rose Mary Woods created on a tape of Richard Nixon discussing the Watergate break-in. Erased information in the gap has not been recovered, and Feenberg claims doing so would be an easy task compared to recovery of a modern high density digital signal. As of November 2007, the United States Department of Defense considers overwriting acceptable for clearing magnetic media within the same security area/

  Read more →
• 

  Dr. Sbaitso

  Dr. Sbaitso ( SPAYT-soh) is an artificial intelligence speech synthesis program released late in 1991 by Creative Labs in Singapore for MS-DOS-based personal computers. The name is an acronym for "SoundBlaster Acting Intelligent Text-to-Speech Operator." == History == Dr. Sbaitso was distributed with various sound cards manufactured by Creative Technology in the early 1990s. The text-to-speech engine used is a version of Monologue, which was developed by First Byte Software. Monologue is a later release of First Byte's "SmoothTalker" software from 1984. The program "conversed" with the user as if it were a psychologist, though most of its responses were along the lines of "WHY DO YOU FEEL THAT WAY?" rather than any sort of complicated interaction. When confronted with a phrase it could not understand, it would often reply with something such as "THAT'S NOT MY PROBLEM." Dr. Sbaitso repeated text out loud that was typed after the word "SAY." Repeated swearing or abusive behavior on the part of the user caused Dr. Sbaitso to "break down" in a "PARITY ERROR" before resetting itself. The same would happen, if the user types "SAY PARITY." The program introduced itself with the following lines: HELLO [UserName], MY NAME IS DOCTOR SBAITSO. I AM HERE TO HELP YOU. SAY WHATEVER IS IN YOUR MIND FREELY, OUR CONVERSATION WILL BE KEPT IN STRICT CONFIDENCE. MEMORY CONTENTS WILL BE WIPED OFF AFTER YOU LEAVE, SO, TELL ME ABOUT YOUR PROBLEMS. The program was designed to showcase the digitized voices the cards were able to produce, though the quality was far from lifelike. Additionally, there was a version of this program for Microsoft Windows through the use of a program called Prody Parrot; this version of the software featured a more detailed graphical user interface. The text-to-speech was also used as the voice of 1st Prize from the Baldi's Basics series, albeit slowed down. == Commands == If the user submits "HELP", a list of commands will appear. If the user then submits "M", more commands will appear. There are three pages of commands in total, with guidance on how to use each of the features.

  Read more →
• 

  Text normalization

  Text normalization is the process of transforming text into a single canonical form that it might not have had before. Normalizing text before storing or processing it allows for separation of concerns, since input is guaranteed to be consistent before operations are performed on it. Text normalization requires being aware of what type of text is to be normalized and how it is to be processed afterwards; there is no all-purpose normalization procedure. == Applications == Text normalization is frequently used when converting text to speech. Numbers, dates, acronyms, and abbreviations are non-standard "words" that need to be pronounced differently depending on context. For example: "$200" would be pronounced as "two hundred dollars" in English, but as "lua selau tālā" in Samoan. "vi" could be pronounced as "vie," "vee," or "the sixth" depending on the surrounding words. Text can also be normalized for storing and searching in a database. For instance, if a search for "resume" is to match the word "résumé," then the text would be normalized by removing diacritical marks; and if "john" is to match "John", the text would be converted to a single case. To prepare text for searching, it might also be stemmed (e.g. converting "flew" and "flying" both into "fly"), canonicalized (e.g. consistently using American or British English spelling), or have stop words removed. == Techniques == For simple, context-independent normalization, such as removing non-alphanumeric characters or diacritical marks, regular expressions would suffice. For example, the sed script sed ‑e "s/\s+/ /g" inputfile would normalize runs of whitespace characters into a single space. More complex normalization requires correspondingly complicated algorithms, including domain knowledge of the language and vocabulary being normalized. Among other approaches, text normalization has been modeled as a problem of tokenizing and tagging streams of text and as a special case of machine translation. == Textual scholarship == In the field of textual scholarship and the editing of historic texts, the term "normalization" implies a degree of modernization and standardization – for example in the extension of scribal abbreviations and the transliteration of the archaic glyphs typically found in manuscript and early printed sources. A normalized edition is therefore distinguished from a diplomatic edition (or semi-diplomatic edition), in which some attempt is made to preserve these features. The aim is to strike an appropriate balance between, on the one hand, rigorous fidelity to the source text (including, for example, the preservation of enigmatic and ambiguous elements); and, on the other, producing a new text that will be comprehensible and accessible to the modern reader. The extent of normalization is therefore at the discretion of the editor, and will vary. Some editors, for example, choose to modernize archaic spellings and punctuation, but others do not. An edition of a text might be normalized based on internal criteria, where orthography is standardized according to the language of the original, or external criteria, where the norms of a different time period are applied. For an example of the latter, a published edition of a medieval Icelandic manuscript might be normalized to the conventions of modern Icelandic, or it might be normalized to Classical Old Icelandic. Standards of normalization vary based on language of the edition as well as the specific conventions of the publisher.

  Read more →
• 

  Error level analysis

  Error level analysis (ELA) is the analysis of compression artifacts in digital data with lossy compression such as JPEG. == Principles == When used, lossy compression is normally applied uniformly to a set of data, such as an image, resulting in a uniform level of compression artifacts. Alternatively, the data may consist of parts with different levels of compression artifacts. This difference may arise from the different parts having been repeatedly subjected to the same lossy compression a different number of times, or the different parts having been subjected to different kinds of lossy compression. A difference in the level of compression artifacts in different parts of the data may therefore indicate that the data has been edited. In the case of JPEG, even a composite with parts subjected to matching compressions will have a difference in the compression artifacts. In order to make the typically faint compression artifacts more readily visible, the data to be analyzed is subjected to an additional round of lossy compression, this time at a known, uniform level, and the result is subtracted from the original data under investigation. The resulting difference image is then inspected manually for any variation in the level of compression artifacts. In 2007, N. Krawetz denoted this method "error level analysis". Additionally, digital data formats such as JPEG sometimes include metadata describing the specific lossy compression used. If in such data the observed compression artifacts differ from those expected from the given metadata description, then the metadata may not describe the actual compressed data, and thus indicate that the data have been edited. == Limitations == By its nature, data without lossy compression, such as a PNG image, cannot be subjected to error level analysis. Consequently, since editing could have been performed on data without lossy compression with lossy compression applied uniformly to the edited, composite data, the presence of a uniform level of compression artifacts does not rule out editing of the data. Additionally, any non-uniform compression artifacts in a composite may be removed by subjecting the composite to repeated, uniform lossy compression. Also, if the image color space is reduced to 256 colors or less, for example, by conversion to GIF, then error level analysis will generate useless results. More significant, the actual interpretation of the level of compression artifacts in a given segment of the data is subjective, and the determination of whether editing has occurred is therefore not robust. == Controversy == In May 2013, Dr Neal Krawetz used error level analysis on the 2012 World Press Photo of the Year and concluded on his Hacker Factor blog that it was "a composite" with modifications that "fail to adhere to the acceptable journalism standards used by Reuters, Associated Press, Getty Images, National Press Photographer's Association, and other media outlets". The World Press Photo organizers responded by letting two independent experts analyze the image files of the winning photographer and subsequently confirmed the integrity of the files. One of the experts, Hany Farid, said about error level analysis that "It incorrectly labels altered images as original and incorrectly labels original images as altered with the same likelihood". Krawetz responded by clarifying that "It is up to the user to interpret the results. Any errors in identification rest solely on the viewer". In May 2015, the citizen journalism team Bellingcat wrote that error level analysis revealed that the Russian Ministry of Defense had edited satellite images related to the Malaysia Airlines Flight 17 disaster. In a reaction to this, image forensics expert Jens Kriese said about error level analysis: "The method is subjective and not based entirely on science", and that it is "a method used by hobbyists". On his Hacker Factor Blog, the inventor of error level analysis Neal Krawetz criticized both Bellingcat's use of error level analysis as "misinterpreting the results" but also on several points Jens Kriese's "ignorance" regarding error level analysis.

  Read more →
• 

  XRX (web application architecture)

  In software development XRX is a web application architecture based on XForms, REST and XQuery. XRX applications store data on both the web client and on the web server in XML format and do not require a translation between data formats. XRX is considered a simple and elegant application architecture due to the minimal number of translations needed to transport data between client and server systems. The XRX architecture is also tightly coupled to W3C standards (CSS, XHTML 2.0, XPath, XML Schema) to ensure XRX applications will be robust in the future. Because XRX applications leverage modern declarative languages on the client and functional languages on the server they are designed to empower non-developers who are not familiar with traditional imperative languages such as JavaScript, Java or .Net. == Overview of XRX == XRX is a zero translation application architecture that uses XML to store data in the client web browser, on the application server and in the database server. It is because each of these layers uses XML as the same structural data model that XRX applications do not have to translate data structures to and from both object and relational data structures. Because of the lack of need for translation, XRX is considered to have a clean and elegant design. The XRX web application architecture allows developers to focus on the business problem and not the translation problem. XRX benefits from several advances in software technology: === Client Architectural Features === A model–view–controller (MVC) architecture that separates the data from its presentation and business logic. A single element (xf:submission) for all server submissions. This replaces much of the JavaScript code required in most AJAX applications. An advanced event model (XML Events) consistent with W3C standards that frees applications from having to deal with vendor-specific and browser-specific event handling. A Dependency graph that is used to store the dependency structure of the client controllers. This frees the developer from having to manually update either the model or the views when data changes in an application. This allows spreadsheet-like applications to be created on the client with very little effort. A declarative programming style that allows most client XForms applications to be created using a small set of approximately 20 elements. This allows rich client applications to be created without knowledge of JavaScript or other procedural scripting languages. An easy-to-extend system for creating new user interface controls using the EXtensible Bindings Language. This allows developers to add new controls at any time without fear of incompatibilities with W3C standards. === Server Architecture Features === Many native XML databases have built-in REST interfaces making each XQuery inherently a RESTful web service. A functional programming model that promotes side-effect free systems that are easier to debug and easier to run on multiple processors. An easy-to-extend system using XQuery function and modules. === Both Client and Server === Both XRX client and server components support a wide range of XML related standards such as XPath, XML Schema and XML Namespaces. Consistent use of REST interfaces to exchange data between the client and server for all transfers of data including as-you-type data checking and suggest functions. Consistent integration of W3C standards including use of XPath and XML Schema data types. A large library of standard of functions used on both the client and server. == Overall Benefits of XRX == One of the principal benefits of the XRX architecture is that it avoids the requirement to "shred" complex data structures into relational structures and then reconstitute the data back into structures when a record is edited on the client. Another benefits of the XRX Web application architecture is that it avoids most of the problems around the object-relational impedance mismatch. Another advantage is that the client developer does not have to learn JavaScript on the client. == Comparison with Traditional Object/Relational Web Application Architectures == Many traditional web application architectures created in the late 1990 were based on middle object tiers and persistence layers that used tabular data streams and relational database systems. Because each of these layers used different structures to store the models the systems required much additional complexity to translate between layers. == History of XRX == Early examples of using a zero-translation architecture in multi-tier systems can be traced back to the rise of object-oriented databases in the 1990s. See OODBMS History Mark Birbeck suggested that the combination of XForms, XQuery with REST interfaces between the two had many advantages in a meeting to the UK XML User Group in September 2006 . His presentation was one of the first to specifically suggest that the combination of three technologies: XForms and XQuery with REST interfaces would have surprisingly beneficial effects. Mark termed this process "Skimming" but that term did not seem to be contagious. Erik Bruchez of Orbeon spoke at the XML 2007 conference on Boston in December 2007. In his presentation "XForms and the eXist XML database: a perfect couple", Bruchez showed that many people were discovering synergistic benefits of XForms on the client and XQuery on the server. The label for XRX was suggested by a blog posting by Dan McCreary on December 14, 2007. It was in this article that Dan suggested the need for a contagious meme for the ideas behind the XRX architecture. == Generalizations of XRX == Although XRX was originally intended to connote the use of XForms on the client, REST as an interface and XQuery on the server, other proponents of the symmetrical use of XML on the client and server have generalized the term to encompass any XML-centric web client and any server that can store and query XML documents. This use of XRX is generally referred to as "shallow XRX". These generalizations do benefit from a simplified zero-translation architecture but many do not benefit from REST interfaces, XPath for consistent data selection, declarative systems in the client, and functional languages on the server (one of the key aspects of XRX). Use of all three technologies (XForms, REST and XQuery) is referred to as "deep XRX". Although XRX architecture is centred on XForms and XQuery, it does not preclude the use of other technologies that manipulate XML natively, such as XSLT, XProc, and XSL-FO.

  Read more →
• 

  PatchMatch

  PatchMatch is an algorithm used to quickly find correspondences (or matches) between small square regions (or patches) of an image. It has various applications in image editing, such as reshuffling or removing objects from images or altering their aspect ratios without cropping or noticeably stretching them. PatchMatch was first presented in a 2011 paper by researchers at Princeton University. == Algorithm == The goal of the algorithm is to find the patch correspondence by defining a nearest-neighbor field (NNF) as a function f : R 2 → R 2 {\displaystyle f:\mathbb {R} ^{2}\to \mathbb {R} ^{2}} of offsets, which is over all possible matches of patch (location of patch centers) in image A, for some distance function of two patches D {\displaystyle D} . So, for a given patch coordinate a {\displaystyle a} in image A {\displaystyle A} and its corresponding nearest neighbor b {\displaystyle b} in image B {\displaystyle B} , f ( a ) {\displaystyle f(a)} is simply b − a {\displaystyle b-a} . However, if we search for every point in image B {\displaystyle B} , the work will be too hard to complete. So the following algorithm is done in a randomized approach in order to accelerate the calculation speed. The algorithm has three main components. Initially, the nearest-neighbor field is filled with either random offsets or some prior information. Next, an iterative update process is applied to the NNF, in which good patch offsets are propagated to adjacent pixels, followed by random search in the neighborhood of the best offset found so far. Independent of these three components, the algorithm also uses a coarse-to-fine approach by building an image pyramid to obtain the better result. === Initialization === When initializing with random offsets, we use independent uniform samples across the full range of image B {\displaystyle B} . This algorithm avoids using an initial guess from the previous level of the pyramid because in this way the algorithm can avoid being trapped in local minima. === Iteration === After initialization, the algorithm attempted to perform iterative process of improving the N N F {\displaystyle NNF} . The iterations examine the offsets in scan order (from left to right, top to bottom), and each undergoes propagation followed by random search. === Propagation === We attempt to improve f ( x , y ) {\displaystyle f(x,y)} using the known offsets of f ( x − 1 , y ) {\displaystyle f(x-1,y)} and f ( x , y − 1 ) {\displaystyle f(x,y-1)} , assuming that the patch offsets are likely to be the same. That is, the algorithm will take new value for f ( x , y ) {\displaystyle f(x,y)} to be arg ⁡ min ( x , y ) D ( f ( x , y ) ) , D ( f ( x − 1 , y ) ) , D ( f ( x , y − 1 ) ) {\displaystyle \arg \min \limits _{(x,y)}{D(f(x,y)),D(f(x-1,y)),D(f(x,y-1))}} . So if f ( x , y ) {\displaystyle f(x,y)} has a correct mapping and is in a coherent region R {\displaystyle R} , then all of R {\displaystyle R} below and to the right of f ( x , y ) {\displaystyle f(x,y)} will be filled with the correct mapping. Alternatively, on even iterations, the algorithm search for different direction, fill the new value to be arg ⁡ min ( x , y ) { D ( f ( x , y ) ) , D ( f ( x + 1 , y ) ) , D ( f ( x , y + 1 ) ) } {\displaystyle \arg \min \limits _{(x,y)}\{D(f(x,y)),D(f(x+1,y)),D(f(x,y+1))\}} . === Random search === Let v 0 = f ( x , y ) {\displaystyle v_{0}=f(x,y)} , we attempt to improve f ( x , y ) {\displaystyle f(x,y)} by testing a sequence of candidate offsets at an exponentially decreasing distance from v 0 {\displaystyle v_{0}} u i = v 0 + w α i R i {\displaystyle u_{i}=v_{0}+w\alpha ^{i}R_{i}} where R i {\displaystyle R_{i}} is a uniform random in [ − 1 , 1 ] × [ − 1 , 1 ] {\displaystyle [-1,1]\times [-1,1]} , w {\displaystyle w} is a large window search radius which will be set to maximum picture size, and α {\displaystyle \alpha } is a fixed ratio often assigned as 1/2. This part of the algorithm allows the f ( x , y ) {\displaystyle f(x,y)} to jump out of local minimum through random process. === Halting criterion === The often used halting criterion is set the iteration times to be about 4~5. Even with low iteration, the algorithm works well.

  Read more →
• 

  Tango (platform)

  Tango (named Project Tango while in testing) was an augmented reality computing platform, developed and authored by the Advanced Technology and Projects (ATAP), a skunkworks division of Google. It used computer vision to enable mobile devices, such as smartphones and tablets, to detect their position relative to the world around them without using GPS or other external signals. This allowed application developers to create user experiences that include indoor navigation, 3D mapping, physical space measurement, environmental recognition, augmented reality, and windows into a virtual world. The first product to emerge from ATAP, Tango was developed by a team led by computer scientist Johnny Lee, a core contributor to Microsoft's Kinect. In an interview in June 2015, Lee said, "We're developing the hardware and software technologies to help everything and everyone understand precisely where they are, anywhere." Google produced two devices to demonstrate the Tango technology: the Peanut phone and the Yellowstone 7-inch tablet. More than 3,000 of these devices had been sold as of June 2015, chiefly to researchers and software developers interested in building applications for the platform. In the summer of 2015, Qualcomm and Intel both announced that they were developing Tango reference devices as models for device manufacturers who use their mobile chipsets. At CES, in January 2016, Google announced a partnership with Lenovo to release a consumer smartphone during the summer of 2016 to feature Tango technology marketed at consumers, noting a less than $500 price-point and a small form factor below 6.5 inches. At the same time, both companies also announced an application incubator to get applications developed to be on the device on launch. On 15 December 2017, Google announced that they would be ending support for Tango on March 1, 2018, in favor of ARCore. == Overview == Tango was different from other contemporary 3D-sensing computer vision products, in that it was designed to run on a standalone mobile phone or tablet and was chiefly concerned with determining the device's position and orientation within the environment. The software worked by integrating three types of functionality: Motion-tracking: using visual features of the environment, in combination with accelerometer and gyroscope data, to closely track the device's movements in space Area learning: storing environment data in a map that can be re-used later, shared with other Tango devices, and enhanced with metadata such as notes, instructions, or points of interest Depth perception: detecting distances, sizes, and surfaces in the environment Together, these generate data about the device in "six degrees of freedom" (3 axes of orientation plus 3 axes of position) and detailed three-dimensional information about the environment. Project Tango was also the first project to graduate from Google X in 2012 Applications on mobile devices use Tango's C and Java APIs to access this data in real time. In addition, an API was also provided for integrating Tango with the Unity game engine; this enabled the conversion or creation of games that allow the user to interact and navigate in the game space by moving and rotating a Tango device in real space. These APIs were documented on the Google developer website. == Applications == Tango enabled apps to track a device's position and orientation within a detailed 3D environment, and to recognize known environments. This allowed the creations of applications such as in-store navigation, visual measurement and mapping utilities, presentation and design tools, and a variety of immersive games. At Augmented World Expo 2015, Johnny Lee demonstrated a construction game that builds a virtual structure in real space, an AR showroom app that allows users to view a full-size virtual automobile and customize its features, a hybrid Nerf gun with mounted Tango screen for dodging and shooting AR monsters superimposed on reality, and a multiplayer VR app that lets multiple players converse in a virtual space where their avatar movements match their real-life movements. Tango apps are distributed through Play. Google has encouraged the development of more apps with hackathons, an app contest, and promotional discounts on the development tablet. == Devices == As a platform for software developers and a model for device manufacturers, Google created two Tango devices. === The Peanut phone === "Peanut" was the first production Tango device, released in the first quarter of 2014. It was a small Android phone with a Qualcomm MSM8974 quad-core processor and additional special hardware including a fisheye motion camera, "RGB-IR" camera for color image and infrared depth detection, and Movidius Vision processing units. A high-performance accelerometer and gyroscope were added after testing several competing models in the MARS lab at the University of Minnesota. Several hundred Peanut devices were distributed to early-access partners including university researchers in computer vision and robotics, as well as application developers and technology startups. Google stopped supporting the Peanut device in September 2015, as by then the Tango software stack had evolved beyond the versions of Android that run on the device. === The Yellowstone tablet === "Yellowstone" was a 7-inch tablet with full Tango functionality, released in June 2014, and sold as the Project Tango Tablet Development Kit. It featured a 2.3 GHz quad-core Nvidia Tegra K1 processor, 128GB flash memory, 1920x1200-pixel touchscreen, 4MP color camera, fisheye-lens (motion-tracking) camera, an IR projector with RGB-IR camera for integrated depth sensing, and 4G LTE connectivity. As of May 27, 2017, the Tango tablet is considered officially unsupported by Google. ==== Testing by NASA ==== In May 2014, two Peanut phones were delivered to the International Space Station to be part of a NASA project to develop autonomous robots that navigate in a variety of environments, including outer space. The soccer-ball-sized, 18-sided polyhedral SPHERES robots were developed at the NASA Ames Research Center, adjacent to the Google campus in Mountain View, California. Andres Martinez, SPHERES manager at NASA, said "We are researching how effective [Tango's] vision-based navigation abilities are for performing localization and navigation of a mobile free flyer on ISS. === Intel RealSense smartphone === Announced at Intel's Developer Forum in August 2015, and offered to public through a Developer Kit since January 2016. It incorporated a RealSense ZR300 camera which had optical features required for Tango, such as the fisheye camera. === Lenovo Phab 2 Pro === Lenovo Phab 2 Pro was the first commercial smartphone with the Tango Technology, the device was announced at the beginning of 2016, launched in August, and available for purchase in the US in November. The Phab 2 Pro had a 6.4 inch screen, a Snapdragon 652 processor, and 64 GB of internal storage, with a rear facing 16 Megapixels camera and 8 MP front camera. === Asus Zenfone AR === Asus Zenfone AR, announced at CES 2017, was the second commercial smartphone with the Tango Technology. It ran Tango AR & Daydream VR on Snapdragon 821, with 6GB or 8GB of RAM and 128 or 256GB of internal memory depending on the configuration.

  Read more →
• 

  Open information extraction

  In natural language processing, open information extraction (OIE) is the task of generating a structured, machine-readable representation of the information in text, usually in the form of triples or n-ary propositions. == Overview == A proposition can be understood as truth-bearer, a textual expression of a potential fact (e.g., "Dante wrote the Divine Comedy"), represented in an amenable structure for computers [e.g., ("Dante", "wrote", "Divine Comedy")]. An OIE extraction normally consists of a relation and a set of arguments. For instance, ("Dante", "passed away in" "Ravenna") is a proposition formed by the relation "passed away in" and the arguments "Dante" and "Ravenna". The first argument is usually referred as the subject while the second is considered to be the object. The extraction is said to be a textual representation of a potential fact because its elements are not linked to a knowledge base. Furthermore, the factual nature of the proposition has not yet been established. In the above example, transforming the extraction into a full fledged fact would first require linking, if possible, the relation and the arguments to a knowledge base. Second, the truth of the extraction would need to be determined. In computer science transforming OIE extractions into ontological facts is known as relation extraction. In fact, OIE can be seen as the first step to a wide range of deeper text understanding tasks such as relation extraction, knowledge-base construction, question answering, semantic role labeling. The extracted propositions can also be directly used for end-user applications such as structured search (e.g., retrieve all propositions with "Dante" as subject). OIE was first introduced by TextRunner developed at the University of Washington Turing Center headed by Oren Etzioni. Other methods introduced later such as Reverb, OLLIE, ClausIE or CSD helped to shape the OIE task by characterizing some of its aspects. At a high level, all of these approaches make use of a set of patterns to generate the extractions. Depending on the particular approach, these patterns are either hand-crafted or learned. == OIE systems and contributions == Reverb suggested the necessity to produce meaningful relations to more accurately capture the information in the input text. For instance, given the sentence "Faust made a pact with the devil", it would be erroneous to just produce the extraction ("Faust", "made", "a pact") since it would not be adequately informative. A more precise extraction would be ("Faust", "made a pact with", "the devil"). Reverb also argued against the generation of overspecific relations. OLLIE stressed two important aspects for OIE. First, it pointed to the lack of factuality of the propositions. For instance, in a sentence like "If John studies hard, he will pass the exam", it would be inaccurate to consider ("John", "will pass", "the exam") as a fact. Additionally, the authors indicated that an OIE system should be able to extract non-verb mediated relations, which account for significant portion of the information expressed in natural language text. For instance, in the sentence "Obama, the former US president, was born in Hawaii", an OIE system should be able to recognize a proposition ("Obama", "is", "former US president"). ClausIE introduced the connection between grammatical clauses, propositions, and OIE extractions. The authors stated that as each grammatical clause expresses a proposition, each verb mediated proposition can be identified by solely recognizing the set of clauses expressed in each sentence. This implies that to correctly recognize the set of propositions in an input sentence, it is necessary to understand its grammatical structure. The authors studied the case in the English language that only admits seven clause types, meaning that the identification of each proposition only requires defining seven grammatical patterns. The finding also established a separation between the recognition of the propositions and its materialization. In a first step, the proposition can be identified without any consideration of its final form, in a domain-independent and unsupervised way, mostly based on linguistic principles. In a second step, the information can be represented according to the requirements of the underlying application, without conditioning the identification phase. Consider the sentence "Albert Einstein was born in Ulm and died in Princeton". The first step will recognize the two propositions ("Albert Einstein", "was born", "in Ulm") and ("Albert Einstein", "died", "in Princeton"). Once the information has been correctly identified, the propositions can take the particular form required by the underlying application [e.g., ("Albert Einstein", "was born in", "Ulm") and ("Albert Einstein", "died in", "Princeton")]. CSD introduced the idea of minimality in OIE. It considers that computers can make better use of the extractions if they are expressed in a compact way. This is especially important in sentences with subordinate clauses. In these cases, CSD suggests the generation of nested extractions. For example, consider the sentence "The Embassy said that 6,700 Americans were in Pakistan". CSD generates two extractions [i] ("6,700 Americans", "were", "in Pakistan") and [ii] ("The Embassy", "said", "that [i]"). This is usually known as reification.

  Read more →
• 

  Tail latency

  Tail latency is a term used to describe the high-percentile response times seen in a system. This is usually measured at the 95th, 99th, or 99.9th percentile, not the average latency. In distributed systems, cloud computing, and large-scale web services, even a small number of slow requests can make the user experience and system performance much worse. Tail latency often happens because of things like resource contention, network variability, garbage collection pauses, and hardware heterogeneity. A major problem in system design is managing tail latency, because lowering average latency doesn't always make the worst-case performance better. To lessen its effects, people often use techniques like request hedging, replication, load balancing, and adaptive timeouts. In latency-sensitive applications like search engines, financial systems, and real-time services, where service-level objectives (SLOs) are often based on high-percentile latencies, it is especially important to understand and improve tail latency.

  Read more →
• 

  Talking Angela

  Talking Angela is a mobile game (formerly a chatbot), developed by Slovenian studio Outfit7 as part of the Talking Tom & Friends series. It was released on 13 November 2012 and December 2012 for iPhone, iPod and iPad, January 2013 for Android, and January 2014 for Google Play. The game's successor, the My Talking Angela game, was released in December 2014. The game takes place in a café in Paris and allows players to interact with Angela, an anthropomorphic white cat in different ways. Players can use coins to purchase makeup, accessories and items, as well as drinks that will trigger different visual effects. The fortune cookie button causes Angela to read out a fortune cookie, while the bird icon will prompt birds to fly around the screen, or have Angela feed them. Players can also pet or poke Angela, as well the café's sign. Prior to their removal, the game featured a chat system and a camera button. Users can engage in conversations with Angela, ask for quizzes or initiate a short snippet of the song "That's Falling In Love". If the player was to type in "Who is an idiot?", Angela would respond with a random swear word. Additionally, inquiring Angela about sexual topics would cause her to reply with "Do you want to talk about sex?", though she will quickly change the topic regardless of what the player writes next. A hoax claiming that Angela's eyes were hidden cameras that enabled hackers or paedophiles to watch children was spread. Despite the claims, Snopes and The Guardian found no evidence. Due to the hoax, Angela received a blue dress, as well as an altered eye asset with a different reflection, and later the chat and camera functions were removed altogether. == Hoaxes == In February 2014, Talking Angela was the subject of an Internet hoax alleging that the application was a front for child predators to exploit children. The rumor, which was widely circulated on Facebook and various websites claiming to be dedicated to parenting, claims that a sinister sexual predator or hacker, asked children for private personal information using the game's text-chat feature. Other versions of the rumour even attributed the disappearance of a child to the game; one news report claimed that a seven year old boy disappeared after downloading the app. Another variation included that it was run by a paedophile ring, citing a man that could be seen in Angela's eyes. The app's developers, Outfit7, later gave a statement refuting the hoaxes. The hoax was eventually debunked by Snopes, a fact-checking website. The site's owners, Barbara and David Mikkelson, reported that they had tried to "prompt" it to give responses asking for private information, but were unsuccessful, even when asking it explicitly sexual questions. While it is true that, in the game with child mode off, Angela does ask for the user's name, age and personal preferences to determine conversation topics, Outfit7 has said that this information is all "anonymized" and all personal information is removed from it. It is also impossible for a person to take control of what Angela says in the game, since the game is based on chatbot software. When the mode was turned on, the chat feature was disabled, meaning no personal questions could be asked. In 2015, the hoax was revived on Facebook, which prompted online security company Sophos and The Guardian to debunk it again. Sophos employee Paul Ducklin wrote that the message being posted on Facebook promoting the hoax was "close to 600 rambling, repetitious words, despite claiming at the start that it didn't have words to describe the situation. It's ill-written, and borders on being illiterate and incomprehensible." Bruce Wilcox, one of the game's programmers, attributed the hoax's popularity to the fact that the chatbot program in Talking Angela aimed to sound realistic. Concern was raised that the game's child mode may have been too easy for children to turn off. It allowed them to purchase "coins", premium currency in the game, via iTunes, and enabled the chat feature. While not "connecting your children to paedophiles", this still raised concerns according to The Guardian. === Impact === The scare significantly boosted the game's popularity, and was credited with helping the app enter the top 10 free iPhone apps soon after the hoax became widely known in February 2015,In the truth the reason there is a man in Angela’s eyes is because of pareidoila, the ability to see through diamonds and other minerals and water bodies and shiny objects,which is the reason why players notice a man in her eyes,The truth is that being Angela’s eyes simply serve as a reflective surface,Because of the low quality of this reflection the reflection was mistaken for a humanoid figure. oref>Smith, Josh (19 February 2014). "Talking Angela App Scare Skyrockets App to Top of Charts". GottaBeMobile.com. Archived from the original on 2 April 2016. Retrieved 10 May 2014. and third most popular for all iPhone apps at the start of the following month. In 2016, Outfit7 removed the chat feature along with the camera function from the app due to this controversy, though this decision was met with criticism.

  Read more →
• 

  SemEval

  SemEval (Semantic Evaluation) is an ongoing series of evaluations of computational semantic analysis systems; it evolved from the Senseval word sense evaluation series. The evaluations are intended to explore the nature of meaning in language. While meaning is intuitive to humans, transferring those intuitions to computational analysis has proved elusive. This series of evaluations provides a mechanism to characterize in more precise terms exactly what is necessary to compute in meaning. As such, the evaluations provide an emergent mechanism to identify the problems and solutions for computations with meaning. These exercises have evolved to articulate more of the dimensions that are involved in our use of language. They began with apparently simple attempts to identify word senses computationally. They have evolved to investigate the interrelationships among the elements in a sentence (e.g., semantic role labeling), relations between sentences (e.g., coreference), and the nature of what we are saying (semantic relations and sentiment analysis). The purpose of the SemEval and Senseval exercises is to evaluate semantic analysis systems. "Semantic Analysis" refers to a formal analysis of meaning, and "computational" refer to approaches that in principle support effective implementation. The first three evaluations, Senseval-1 through Senseval-3, were focused on word sense disambiguation (WSD), each time growing in the number of languages offered in the tasks and in the number of participating teams. Beginning with the fourth workshop, SemEval-2007 (SemEval-1), the nature of the tasks evolved to include semantic analysis tasks outside of word sense disambiguation. Triggered by the conception of the SEM conference, the SemEval community had decided to hold the evaluation workshops yearly in association with the SEM conference. It was also the decision that not every evaluation task will be run every year, e.g. none of the WSD tasks were included in the SemEval-2012 workshop. == History == === Early evaluation of algorithms for word sense disambiguation === From the earliest days, assessing the quality of word sense disambiguation algorithms had been primarily a matter of intrinsic evaluation, and “almost no attempts had been made to evaluate embedded WSD components”. Only very recently (2006) had extrinsic evaluations begun to provide some evidence for the value of WSD in end-user applications. Until 1990 or so, discussions of the sense disambiguation task focused mainly on illustrative examples rather than comprehensive evaluation. The early 1990s saw the beginnings of more systematic and rigorous intrinsic evaluations, including more formal experimentation on small sets of ambiguous words. === Senseval to SemEval === In April 1997, Martha Palmer and Marc Light organized a workshop entitled Tagging with Lexical Semantics: Why, What, and How? in conjunction with the Conference on Applied Natural Language Processing. At the time, there was a clear recognition that manually annotated corpora had revolutionized other areas of NLP, such as part-of-speech tagging and parsing, and that corpus-driven approaches had the potential to revolutionize automatic semantic analysis as well. Kilgarriff recalled that there was "a high degree of consensus that the field needed evaluation", and several practical proposals by Resnik and Yarowsky kicked off a discussion that led to the creation of the Senseval evaluation exercises. === SemEval's 3, 2 or 1 year(s) cycle === After SemEval-2010, many participants feel that the 3-year cycle is a long wait. Many other shared tasks such as Conference on Natural Language Learning (CoNLL) and Recognizing Textual Entailments (RTE) run annually. For this reason, the SemEval coordinators gave the opportunity for task organizers to choose between a 2-year or a 3-year cycle. The SemEval community favored the 3-year cycle. Although the votes within the SemEval community favored a 3-year cycle, organizers and coordinators had settled to split the SemEval task into 2 evaluation workshops. This was triggered by the introduction of the new SEM conference. The SemEval organizers thought it would be appropriate to associate our event with the SEM conference and collocate the SemEval workshop with the SEM conference. The organizers got very positive responses (from the task coordinators/organizers and participants) about the association with the yearly SEM, and 8 tasks were willing to switch to 2012. Thus was born SemEval-2012 and SemEval-2013. The current plan is to switch to a yearly SemEval schedule to associate it with the SEM conference but not every task needs to run every year. ==== List of Senseval and SemEval Workshops ==== Senseval-1 took place in the summer of 1998 for English, French, and Italian, culminating in a workshop held at Herstmonceux Castle, Sussex, England on September 2–4. Senseval-2 took place in the summer of 2001, and was followed by a workshop held in July 2001 in Toulouse, in conjunction with ACL 2001. Senseval-2 included tasks for Basque, Chinese, Czech, Danish, Dutch, English, Estonian, Italian, Japanese, Korean, Spanish and Swedish. Senseval-3 took place in March–April 2004, followed by a workshop held in July 2004 in Barcelona, in conjunction with ACL 2004. Senseval-3 included 14 different tasks for core word sense disambiguation, as well as identification of semantic roles, multilingual annotations, logic forms, subcategorization acquisition. SemEval-2007 (Senseval-4) took place in 2007, followed by a workshop held in conjunction with ACL in Prague. SemEval-2007 included 18 different tasks targeting the evaluation of systems for the semantic analysis of text. A special issue of Language Resources and Evaluation is devoted to the result. SemEval-2010 took place in 2010, followed by a workshop held in conjunction with ACL in Uppsala. SemEval-2010 included 18 different tasks targeting the evaluation of semantic analysis systems. SemEval-2012 took place in 2012; it was associated with the new SEM, First Joint Conference on Lexical and Computational Semantics, and co-located with NAACL, Montreal, Canada. SemEval-2012 included 8 different tasks targeting at evaluating computational semantic systems. However, there was no WSD task involved in SemEval-2012, the WSD related tasks were scheduled in the upcoming SemEval-2013. SemEval-2013 was associated with NAACL 2013, North American Association of Computational Linguistics, Georgia, USA and took place in 2013. It included 13 different tasks targeting at evaluating computational semantic systems. SemEval-2014 took place in 2014. It was co-located with COLING 2014, 25th International Conference on Computational Linguistics and SEM 2014, Second Joint Conference on Lexical and Computational Semantics, Dublin, Ireland. There were 10 different tasks in SemEval-2014 evaluating various computational semantic systems. SemEval-2015 took place in 2015. It was co-located with NAACL-HLT 2015, 2015 Conference of the North American Chapter of the Association for Computational Linguistics – Human Language Technologies and SEM 2015, Third Joint Conference on Lexical and Computational Semantics, Denver, USA. There were 17 different tasks in SemEval-2015 evaluating various computational semantic systems. == SemEval Workshop framework == The framework of the SemEval/Senseval evaluation workshops emulates the Message Understanding Conferences (MUCs) and other evaluation workshops ran by ARPA (Advanced Research Projects Agency, renamed the Defense Advanced Research Projects Agency (DARPA)). Stages of SemEval/Senseval evaluation workshops Firstly, all likely participants were invited to express their interest and participate in the exercise design. A timetable towards a final workshop was worked out. A plan for selecting evaluation materials was agreed. 'Gold standards' for the individual tasks were acquired, often human annotators were considered as a gold standard to measure precision and recall scores of computer systems. These 'gold standards' are what the computational systems strive towards. In WSD tasks, human annotators were set on the task of generating a set of correct WSD answers (i.e. the correct sense for a given word in a given context) The gold standard materials, without answers, were released to participants, who then had a short time to run their programs over them and return their sets of answers to the organizers. The organizers then scored the answers and the scores were announced and discussed at a workshop. == Semantic evaluation tasks == Senseval-1 & Senseval-2 focused on evaluation WSD systems on major languages that were available corpus and computerized dictionary. Senseval-3 looked beyond the lexemes and started to evaluate systems that looked into wider areas of semantics, such as Semantic Roles (technically known as Theta roles in formal semantics), Logic Form Transformation (commonly semantics of phrases, clauses or sentences were represented

  Read more →