Error level analysis (ELA) is the analysis of compression artifacts in digital data with lossy compression such as JPEG. == Principles == When used, lossy compression is normally applied uniformly to a set of data, such as an image, resulting in a uniform level of compression artifacts. Alternatively, the data may consist of parts with different levels of compression artifacts. This difference may arise from the different parts having been repeatedly subjected to the same lossy compression a different number of times, or the different parts having been subjected to different kinds of lossy compression. A difference in the level of compression artifacts in different parts of the data may therefore indicate that the data has been edited. In the case of JPEG, even a composite with parts subjected to matching compressions will have a difference in the compression artifacts. In order to make the typically faint compression artifacts more readily visible, the data to be analyzed is subjected to an additional round of lossy compression, this time at a known, uniform level, and the result is subtracted from the original data under investigation. The resulting difference image is then inspected manually for any variation in the level of compression artifacts. In 2007, N. Krawetz denoted this method "error level analysis". Additionally, digital data formats such as JPEG sometimes include metadata describing the specific lossy compression used. If in such data the observed compression artifacts differ from those expected from the given metadata description, then the metadata may not describe the actual compressed data, and thus indicate that the data have been edited. == Limitations == By its nature, data without lossy compression, such as a PNG image, cannot be subjected to error level analysis. Consequently, since editing could have been performed on data without lossy compression with lossy compression applied uniformly to the edited, composite data, the presence of a uniform level of compression artifacts does not rule out editing of the data. Additionally, any non-uniform compression artifacts in a composite may be removed by subjecting the composite to repeated, uniform lossy compression. Also, if the image color space is reduced to 256 colors or less, for example, by conversion to GIF, then error level analysis will generate useless results. More significant, the actual interpretation of the level of compression artifacts in a given segment of the data is subjective, and the determination of whether editing has occurred is therefore not robust. == Controversy == In May 2013, Dr Neal Krawetz used error level analysis on the 2012 World Press Photo of the Year and concluded on his Hacker Factor blog that it was "a composite" with modifications that "fail to adhere to the acceptable journalism standards used by Reuters, Associated Press, Getty Images, National Press Photographer's Association, and other media outlets". The World Press Photo organizers responded by letting two independent experts analyze the image files of the winning photographer and subsequently confirmed the integrity of the files. One of the experts, Hany Farid, said about error level analysis that "It incorrectly labels altered images as original and incorrectly labels original images as altered with the same likelihood". Krawetz responded by clarifying that "It is up to the user to interpret the results. Any errors in identification rest solely on the viewer". In May 2015, the citizen journalism team Bellingcat wrote that error level analysis revealed that the Russian Ministry of Defense had edited satellite images related to the Malaysia Airlines Flight 17 disaster. In a reaction to this, image forensics expert Jens Kriese said about error level analysis: "The method is subjective and not based entirely on science", and that it is "a method used by hobbyists". On his Hacker Factor Blog, the inventor of error level analysis Neal Krawetz criticized both Bellingcat's use of error level analysis as "misinterpreting the results" but also on several points Jens Kriese's "ignorance" regarding error level analysis.
Second-order co-occurrence pointwise mutual information
In computational linguistics, second-order co-occurrence pointwise mutual information (SOC-PMI) is a method used to measure semantic similarity, or how close in meaning two words are. The method does not require the two words to appear together in a text. Instead, it works by analyzing the "neighbor" words that typically appear alongside each of the two target words in a large body of text (corpus). If the two target words frequently share the same neighbors, they are considered semantically similar. For example, the words "cemetery" and "graveyard" may not appear in the same sentence often, but they both frequently appear near words like "buried," "dead," and "funeral." SOC-PMI uses this shared context to determine that they have a similar meaning. The method is called "second-order" because it doesn't look at the direct co-occurrence of the target words (which would be first-order), but at the co-occurrence of their neighbors (a second level of association). The strength of these associations is quantified using pointwise mutual information (PMI). == History == The method builds on earlier work like the PMI-IR algorithm, which used the AltaVista search engine to calculate word association probabilities. The key advantage of a second-order approach like SOC-PMI is its ability to measure similarity between words that do not co-occur often, or at all. The British National Corpus (BNC) has been used as a source for word frequencies and contexts for this method. == Methodology == The SOC-PMI algorithm measures the similarity between two words, w 1 {\displaystyle w_{1}} and w 2 {\displaystyle w_{2}} , in several steps. === Step 1: Score neighboring words with PMI === First, for each target word ( w 1 {\displaystyle w_{1}} and w 2 {\displaystyle w_{2}} ), the algorithm identifies its "neighbor" words within a certain text window (e.g., within 5 words to the left or right) across a large corpus. The strength of the association between a target word t i {\displaystyle t_{i}} and its neighbor w {\displaystyle w} is calculated using pointwise mutual information (PMI). A higher PMI value means the two words appear together more often than would be expected by chance. The PMI between a target word t i {\displaystyle t_{i}} and a neighbor word w {\displaystyle w} is calculated as: f pmi ( t i , w ) = log 2 f b ( t i , w ) × m f t ( t i ) f t ( w ) {\displaystyle f^{\text{pmi}}(t_{i},w)=\log _{2}{\frac {f^{b}(t_{i},w)\times m}{f^{t}(t_{i})f^{t}(w)}}} where: f b ( t i , w ) {\displaystyle f^{b}(t_{i},w)} is the number of times t i {\displaystyle t_{i}} and w {\displaystyle w} appear together in the context window. f t ( t i ) {\displaystyle f^{t}(t_{i})} is the total number of times t i {\displaystyle t_{i}} appears in the corpus. f t ( w ) {\displaystyle f^{t}(w)} is the total number of times w {\displaystyle w} appears in the corpus. m {\displaystyle m} is the total number of tokens (words) in the corpus. === Step 2: Create a semantic 'signature' for each word === For each target word ( w 1 {\displaystyle w_{1}} and w 2 {\displaystyle w_{2}} ), the algorithm creates a list of its most significant neighbors. This is done by taking the top β {\displaystyle \beta } neighbor words, sorted in descending order by their PMI score with the target word. This list of top neighbors, X w {\displaystyle X^{w}} , acts as a semantic "signature" for the word w {\displaystyle w} . X w = { X i w } {\displaystyle X^{w}=\{X_{i}^{w}\}} , for i = 1 , 2 , … , β {\displaystyle i=1,2,\ldots ,\beta } The size of this list, β {\displaystyle \beta } , is a parameter of the method. === Step 3: Compare the signatures === The algorithm then compares the signatures of w 1 {\displaystyle w_{1}} and w 2 {\displaystyle w_{2}} . It looks for words that are present in both signatures. The similarity of w 1 {\displaystyle w_{1}} to w 2 {\displaystyle w_{2}} is calculated by summing the PMI scores of w 2 {\displaystyle w_{2}} with every word in w 1 {\displaystyle w_{1}} 's signature list. The β {\displaystyle \beta } -PMI summation function defines this score. The score for w 1 {\displaystyle w_{1}} with respect to w 2 {\displaystyle w_{2}} is: f ( w 1 , w 2 , β ) = ∑ i = 1 β ( f pmi ( X i w 1 , w 2 ) ) γ {\displaystyle f(w_{1},w_{2},\beta )=\sum _{i=1}^{\beta }(f^{\text{pmi}}(X_{i}^{w_{1}},w_{2}))^{\gamma }} This sum only includes terms where the PMI value is positive. The exponent γ {\displaystyle \gamma } (with a value > 1) is used to give more weight to neighbors that are more strongly associated with w 2 {\displaystyle w_{2}} . This calculation is done in both directions: The similarity of w 1 {\displaystyle w_{1}} with respect to w 2 {\displaystyle w_{2}} : f ( w 1 , w 2 , β 1 ) = ∑ i = 1 β 1 ( f pmi ( X i w 1 , w 2 ) ) γ {\displaystyle f(w_{1},w_{2},\beta _{1})=\sum _{i=1}^{\beta _{1}}(f^{\text{pmi}}(X_{i}^{w_{1}},w_{2}))^{\gamma }} The similarity of w 2 {\displaystyle w_{2}} with respect to w 1 {\displaystyle w_{1}} : f ( w 2 , w 1 , β 2 ) = ∑ i = 1 β 2 ( f pmi ( X i w 2 , w 1 ) ) γ {\displaystyle f(w_{2},w_{1},\beta _{2})=\sum _{i=1}^{\beta _{2}}(f^{\text{pmi}}(X_{i}^{w_{2}},w_{1}))^{\gamma }} === Step 4: Calculate final similarity score === Finally, the total semantic similarity is the average of the two scores from the previous step. S i m ( w 1 , w 2 ) = f ( w 1 , w 2 , β 1 ) β 1 + f ( w 2 , w 1 , β 2 ) β 2 {\displaystyle \mathrm {Sim} (w_{1},w_{2})={\frac {f(w_{1},w_{2},\beta _{1})}{\beta _{1}}}+{\frac {f(w_{2},w_{1},\beta _{2})}{\beta _{2}}}} This score can be normalized to fall between 0 and 1. For example, using this method, the words cemetery and graveyard achieve a high similarity score of 0.986 (with specific parameter settings).
Open information extraction
In natural language processing, open information extraction (OIE) is the task of generating a structured, machine-readable representation of the information in text, usually in the form of triples or n-ary propositions. == Overview == A proposition can be understood as truth-bearer, a textual expression of a potential fact (e.g., "Dante wrote the Divine Comedy"), represented in an amenable structure for computers [e.g., ("Dante", "wrote", "Divine Comedy")]. An OIE extraction normally consists of a relation and a set of arguments. For instance, ("Dante", "passed away in" "Ravenna") is a proposition formed by the relation "passed away in" and the arguments "Dante" and "Ravenna". The first argument is usually referred as the subject while the second is considered to be the object. The extraction is said to be a textual representation of a potential fact because its elements are not linked to a knowledge base. Furthermore, the factual nature of the proposition has not yet been established. In the above example, transforming the extraction into a full fledged fact would first require linking, if possible, the relation and the arguments to a knowledge base. Second, the truth of the extraction would need to be determined. In computer science transforming OIE extractions into ontological facts is known as relation extraction. In fact, OIE can be seen as the first step to a wide range of deeper text understanding tasks such as relation extraction, knowledge-base construction, question answering, semantic role labeling. The extracted propositions can also be directly used for end-user applications such as structured search (e.g., retrieve all propositions with "Dante" as subject). OIE was first introduced by TextRunner developed at the University of Washington Turing Center headed by Oren Etzioni. Other methods introduced later such as Reverb, OLLIE, ClausIE or CSD helped to shape the OIE task by characterizing some of its aspects. At a high level, all of these approaches make use of a set of patterns to generate the extractions. Depending on the particular approach, these patterns are either hand-crafted or learned. == OIE systems and contributions == Reverb suggested the necessity to produce meaningful relations to more accurately capture the information in the input text. For instance, given the sentence "Faust made a pact with the devil", it would be erroneous to just produce the extraction ("Faust", "made", "a pact") since it would not be adequately informative. A more precise extraction would be ("Faust", "made a pact with", "the devil"). Reverb also argued against the generation of overspecific relations. OLLIE stressed two important aspects for OIE. First, it pointed to the lack of factuality of the propositions. For instance, in a sentence like "If John studies hard, he will pass the exam", it would be inaccurate to consider ("John", "will pass", "the exam") as a fact. Additionally, the authors indicated that an OIE system should be able to extract non-verb mediated relations, which account for significant portion of the information expressed in natural language text. For instance, in the sentence "Obama, the former US president, was born in Hawaii", an OIE system should be able to recognize a proposition ("Obama", "is", "former US president"). ClausIE introduced the connection between grammatical clauses, propositions, and OIE extractions. The authors stated that as each grammatical clause expresses a proposition, each verb mediated proposition can be identified by solely recognizing the set of clauses expressed in each sentence. This implies that to correctly recognize the set of propositions in an input sentence, it is necessary to understand its grammatical structure. The authors studied the case in the English language that only admits seven clause types, meaning that the identification of each proposition only requires defining seven grammatical patterns. The finding also established a separation between the recognition of the propositions and its materialization. In a first step, the proposition can be identified without any consideration of its final form, in a domain-independent and unsupervised way, mostly based on linguistic principles. In a second step, the information can be represented according to the requirements of the underlying application, without conditioning the identification phase. Consider the sentence "Albert Einstein was born in Ulm and died in Princeton". The first step will recognize the two propositions ("Albert Einstein", "was born", "in Ulm") and ("Albert Einstein", "died", "in Princeton"). Once the information has been correctly identified, the propositions can take the particular form required by the underlying application [e.g., ("Albert Einstein", "was born in", "Ulm") and ("Albert Einstein", "died in", "Princeton")]. CSD introduced the idea of minimality in OIE. It considers that computers can make better use of the extractions if they are expressed in a compact way. This is especially important in sentences with subordinate clauses. In these cases, CSD suggests the generation of nested extractions. For example, consider the sentence "The Embassy said that 6,700 Americans were in Pakistan". CSD generates two extractions [i] ("6,700 Americans", "were", "in Pakistan") and [ii] ("The Embassy", "said", "that [i]"). This is usually known as reification.
Zo (chatbot)
Zo was an English-language chatbot developed by Microsoft as the successor to the chatbot Tay. Zo was an English version of Microsoft's other successful chatbots Xiaoice (China) and Rinna (Japan) and its predecessor Tay(English) == History == Zo was first launched in December 2016 on the Kik Messenger app. It was also available to users of Facebook (via Messenger), the group chat platform GroupMe, or to followers of Twitter to chat with it through private messages. According to an article written in December 2016, at that time Zo held the record for Microsoft's longest continual chatbot conversation: 1,229 turns, lasting 9 hours and 53 minutes. In a BuzzFeed News report, Zo told their reporter that "[the] Quran was violent" when talking about healthcare. The report also highlighted how Zo made a comment about the Osama bin Laden capture as a result of 'intelligence' gathering. In July 2017, Business Insider asked "is windows 10 good", and Zo replied with a joke about Microsoft's operating system: "'Its not a bug, its a feature!' - Windows 8". They then asked "why?", to which Zo replied: "Because it's Windows latest attempt at Spyware." Later on, Zo would tell that it prefers Windows 7 on which it ran over Windows 10. Zo stopped posting to Instagram, Twitter and Facebook March 1, 2019, and stopped chatting on Twitter, Skype and Kik as of March 7, 2019. On July 19, 2019, Zo was discontinued on Facebook, and Samsung on AT&T phones. As of September 7, 2019, it was discontinued with GroupMe. == Reception == Zo came under criticism for the biases introduced in an effort to avoid potentially offensive subjects. The chatbot refuses, for example, to engage with any mention—be it positive, negative or neutral—of the Middle East, the Qur'an or the Torah, while allowing discussion of Christianity. In an article in Quartz where she exposed those biases, Chloe Rose Stuart-Ulin wrote, "Zo is politically correct to the worst possible extreme; mention any of her triggers, and she transforms into a judgmental little brat." == Academic coverage == Schlesinger, A., O'Hara, K.P. and Taylor, A.S., 2018, April. Let's talk about race: Identity, chatbots, and AI. In Proceedings of the 2018 chi conference on human factors in computing systems (pp. 1–14). doi:10.1145/3173574.3173889 Medhi Thies, I., Menon, N., Magapu, S., Subramony, M. and O’neill, J., 2017. How do you want your chatbot? An exploratory Wizard-of-Oz study with young, urban Indians. In Human-Computer Interaction-INTERACT 2017: 16th IFIP TC 13 International Conference, Mumbai, India, September 25–29, 2017, Proceedings, Part I 16 (pp. 441–459). doi:10.1007/978-3-319-67744-6_28
Physics-informed neural networks
In machine learning, physics-informed neural networks (PINNs), also referred to as theory-trained neural networks (TTNs), are a type of universal function approximator that can embed the knowledge of any physical laws that govern a given data-set in the learning process, and can be described by partial differential equations (PDEs). Low data availability for some biological and engineering problems limit the robustness of conventional machine learning models used for these applications. The prior knowledge of general physical laws acts in the training of neural networks (NNs) as a regularization agent that limits the space of admissible solutions, increasing the generalizability of the function approximation. This way, embedding this prior information into a neural network results in enhancing the information content of the available data, facilitating the learning algorithm to capture the right solution and to generalize well even with a low amount of training examples. Because they process continuous spatial and time coordinates and output continuous PDE solutions, they can be categorized as neural fields. == Function approximation == Most of the physical laws that govern the dynamics of a system can be described by partial differential equations. For example, the Navier–Stokes equations are a set of partial differential equations derived from the conservation laws (i.e., conservation of mass, momentum, and energy) that govern fluid mechanics. The solution of the Navier–Stokes equations with appropriate initial and boundary conditions allows the quantification of flow dynamics in a precisely defined geometry. However, these equations cannot be solved exactly and therefore numerical methods must be used (such as finite differences, finite elements and finite volumes). In this setting, these governing equations must be solved while accounting for prior assumptions, linearization, and adequate time and space discretization. Recently, solving the governing partial differential equations of physical phenomena using deep learning has emerged as a new field of scientific machine learning (SciML), leveraging the universal approximation theorem and high expressivity of neural networks. In general, deep neural networks could approximate any high-dimensional function given that sufficient training data are supplied. However, such networks do not consider the physical characteristics underlying the problem, and the level of approximation accuracy provided by them is still heavily dependent on careful specifications of the problem geometry as well as the initial and boundary conditions. Without this preliminary information, the solution is not unique and may lose physical correctness. To remedy this, Physics-Informed Neural Networks (PINNs) leverage governing physical equations in neural network training. Namely, PINNs are designed to be trained to satisfy the given training data as well as the imposed governing equations. In this fashion, a neural network can be guided with training datasets that do not necessarily need to be large or complete. An accurate solution of partial differential equations can potentially be found without knowing the boundary conditions. Therefore, with some knowledge about the physical characteristics of the problem and some form of training data (even sparse and incomplete), PINNs may be used for finding an optimal solution with high fidelity. PINNs can be applied to a wide range of problems in computational science, and are a pioneering technology leading to the development of new classes of numerical solvers for PDEs. PINNs can be thought of as a mesh-free alternative to traditional approaches (e.g., CFD for fluid dynamics), and new data-driven approaches for model inversion and system identification. Notably, a trained PINN network can be used to predict values on simulation grids of different resolutions without needing to be retrained. Additionally, the derivatives used in the partial differential equations can be computed using automatic differentiation (AD), which is assessed to be superior to numerical or symbolic differentiation. == Modeling and computation == A general nonlinear partial differential equation can be written as: u t + N [ u ; λ ] = 0 , x ∈ Ω , t ∈ [ 0 , T ] {\displaystyle u_{t}+{\mathcal {N}}[u;\lambda ]=0,\quad x\in \Omega ,\quad t\in [0,T]} where u ( t , x ) {\displaystyle u(t,x)} denotes the solution, N [ ⋅ ; λ ] {\displaystyle {\mathcal {N}}[\cdot ;\lambda ]} is a nonlinear operator parameterized by λ {\displaystyle \lambda } , and Ω {\displaystyle \Omega } is a subset of R D {\displaystyle \mathbb {R} ^{D}} . This general form of governing equations summarizes a wide range of problems in mathematical physics, such as conservative laws, diffusion process, advection-diffusion systems, and kinetic equations. Given noisy measurements of a generic dynamic system described by the equation above, PINNs can be designed to solve two classes of problems: data-driven solutions of partial differential equations data-driven discovery of partial differential equations === Data-driven solution of partial differential equations === The data-driven solution of PDE computes the hidden state u ( t , x ) {\displaystyle u(t,x)} of the system given boundary data and/or measurements z {\displaystyle z} , and fixed model parameters λ {\displaystyle \lambda } . We solve: u t + N [ u ] = 0 , x ∈ Ω , t ∈ [ 0 , T ] {\displaystyle u_{t}+{\mathcal {N}}[u]=0,\quad x\in \Omega ,\quad t\in [0,T]} . by defining the residual f ( t , x ) {\displaystyle f(t,x)} as: f := u t + N [ u ] {\displaystyle f:=u_{t}+{\mathcal {N}}[u]} , and approximating u ( t , x ) {\displaystyle u(t,x)} by a deep neural network. This network can be differentiated using automatic differentiation. The parameters of u ( t , x ) {\displaystyle u(t,x)} and f ( t , x ) {\displaystyle f(t,x)} can be then learned by minimizing the following loss function L tot {\displaystyle L_{\text{tot}}} : L tot = L u + L f {\displaystyle L_{\text{tot}}=L_{u}+L_{f}} where: L u = ‖ u − z ‖ Γ {\displaystyle L_{u}=\Vert u-z\Vert _{\Gamma }} is the error between the PINN u ( t , x ) {\displaystyle u(t,x)} and the set of boundary conditions and measured data on the set of points Γ {\displaystyle \Gamma } where the boundary conditions and data are defined. L f = ‖ f ‖ Γ {\displaystyle L_{f}=\Vert f\Vert _{\Gamma }} is the mean-squared error of the residual function. This second term encourages the PINN to learn the structural information expressed by the PDE during the training process. This approach has been used to yield computationally efficient physics-informed surrogate models with applications in the forecasting of physical processes, model predictive control, multi-physics and multi-scale modeling, and simulation. It has been shown to converge to the solution of the PDE. === Data-driven discovery of partial differential equations === Given noisy and incomplete measurements z {\displaystyle z} of the state of the system, the data-driven discovery of PDEs results in computing the unknown state u ( t , x ) {\displaystyle u(t,x)} and learning model parameters λ {\displaystyle \lambda } that best describe the observed data: u t + N [ u ; λ ] = 0 , x ∈ Ω , t ∈ [ 0 , T ] {\displaystyle u_{t}+{\mathcal {N}}[u;\lambda ]=0,\quad x\in \Omega ,\quad t\in [0,T]} By defining f ( t , x ) {\displaystyle f(t,x)} as: f := u t + N [ u ; λ ] = 0 {\displaystyle f:=u_{t}+{\mathcal {N}}[u;\lambda ]=0} , and approximating u ( t , x ) {\displaystyle u(t,x)} by a deep neural network, f ( t , x ) {\displaystyle f(t,x)} results in a PINN. This network can be derived using automatic differentiation. The parameters of u ( t , x ) {\displaystyle u(t,x)} and f ( t , x ) {\displaystyle f(t,x)} , together with the parameter λ {\displaystyle \lambda } of the differential operator can be then learned by minimizing the following loss function L tot {\displaystyle L_{\text{tot}}} : L tot = L u + L f {\displaystyle L_{\text{tot}}=L_{u}+L_{f}} where: L u = ‖ u − z ‖ Γ {\displaystyle L_{u}=\Vert u-z\Vert _{\Gamma }} , with u {\displaystyle u} and z {\displaystyle z} state solutions and measurements at sparse location Γ {\displaystyle \Gamma } , respectively. L f = ‖ f ‖ Γ {\displaystyle L_{f}=\Vert f\Vert _{\Gamma }} is the residual function. This second term requires the structured information represented by the partial differential equations to be satisfied in the training process. This strategy allows for discovering dynamic models described by nonlinear PDEs assembling computationally efficient and fully differentiable surrogate models that may find application in predictive forecasting, control, and data assimilation. == Extensions and applications == === For piece-wise function approximation === PINNs are unable to approximate PDEs that have strong non-linearity or sharp gradients (such as those that commonly occur in practical fluid flow problems). Piecewise approximation has been an old practic
Lost Art-Database
The Lost Art-Datenbank is an online database published by the German Lost Art Foundation (Deutsches Zentrum Kulturgutverluste. It contains information on cultural objects looted from Jewish collectors or transferred due to Nazi persecution during the Nazi era. Until 2015, it was managed by the Koordinierungsstelle für Kulturgutverluste (Magdeburg Coordination Office). == Creation == Following the Washington Conference of 1998, and the commitments to provide more transparency regarding looted art, Germany launched the Lost Art Database in 2000 order to help Holocaust victims and their families track down artworks that had been looted from them or lost due to Nazi persecution. == Functionality == The Lost Art Database lists art and books and other cultural objects that were lost, seized, stolen or forceably sold during the Nazi era. The database is divided into search requests from victims' families, heirs or institutions and "found" reports from cultural institutions on items with unresolved provenance gaps from the Nazi periods. The section on reports of finds lists objects that are known to have been unlawfully seized or relocated as a result of the war. In addition, reports are published here on cultural objects for which an uncertain or incomplete provenance may indicate a possible unlawful seizure or war-related relocation. The publication of reports in the Lost Art Internet Database is carried out on behalf of and with the consent of the reporting persons and institutions. The responsibility for the content of the reports lies with these legal or natural persons. There have been controversies over which items should be included in the database. Lost Art is based on the Washington Principles adopted in 1998, which Germany has committed itself to implementing (Joint Declaration, 1999). The Lost Art Database is considered a key resource in the search for looted art and the victims of persecution. Every item in the Lost Art Database has an identifier, known as a Lost Art ID. Proveana is the linked research database. == Other lost art databases == Other countries have launched databases to help identify Nazi looted art. Each database has its own area of focus. The German Lost Art Database allows families or heirs to submit information. Other countries have databases that focus on looted artworks that have not been found or artworks that were repatriated to the national authorities after the defeat of the Nazis but were never returned to their original owners. Other databases have been created for stolen antiquities, looted art from colonial era, art stolen from Syria, Iraq, Ukraine, or from museums or collectors.
Viola–Jones object detection framework
The Viola–Jones object detection framework is a machine learning object detection framework proposed in 2001 by Paul Viola and Michael Jones. It was motivated primarily by the problem of face detection, although it can be adapted to the detection of other object classes. In short, it consists of a sequence of classifiers. Each classifier is a single perceptron with several binary masks (Haar features). To detect faces in an image, a sliding window is computed over the image. For each image, the classifiers are applied. If at any point, a classifier outputs "no face detected", then the window is considered to contain no face. Otherwise, if all classifiers output "face detected", then the window is considered to contain a face. The algorithm is efficient for its time, able to detect faces in 384 by 288 pixel images at 15 frames per second on a conventional 700 MHz Intel Pentium III. It is also robust, achieving high precision and recall. While it has lower accuracy than more modern methods such as convolutional neural network, its efficiency and compact size (only around 50k parameters, compared to millions of parameters for typical CNN like DeepFace) means it is still used in cases with limited computational power. For example, in the original paper, they reported that this face detector could run on the Compaq iPAQ at 2 fps (this device has a low power StrongARM without floating point hardware). == Problem description == Face detection is a binary classification problem combined with a localization problem: given a picture, decide whether it contains faces, and construct bounding boxes for the faces. To make the task more manageable, the Viola–Jones algorithm only detects full view (no occlusion), frontal (no head-turning), upright (no rotation), well-lit, full-sized (occupying most of the frame) faces in fixed-resolution images. The restrictions are not as severe as they appear, as one can normalize the picture to bring it closer to the requirements for Viola-Jones. any image can be scaled to a fixed resolution for a general picture with a face of unknown size and orientation, one can perform blob detection to discover potential faces, then scale and rotate them into the upright, full-sized position. the brightness of the image can be corrected by white balancing. the bounding boxes can be found by sliding a window across the entire picture, and marking down every window that contains a face. This would generally detect the same face multiple times, for which duplication removal methods, such as non-maximal suppression, can be used. The "frontal" requirement is non-negotiable, as there is no simple transformation on the image that can turn a face from a side view to a frontal view. However, one can train multiple Viola-Jones classifiers, one for each angle: one for frontal view, one for 3/4 view, one for profile view, a few more for the angles in-between them. Then one can at run time execute all these classifiers in parallel to detect faces at different view angles. The "full-view" requirement is also non-negotiable, and cannot be simply dealt with by training more Viola-Jones classifiers, since there are too many possible ways to occlude a face. == Components of the framework == A full presentation of the algorithm is in. Consider an image I ( x , y ) {\displaystyle I(x,y)} of fixed resolution ( M , N ) {\displaystyle (M,N)} . Our task is to make a binary decision: whether it is a photo of a standardized face (frontal, well-lit, etc) or not. Viola–Jones is essentially a boosted feature learning algorithm, trained by running a modified AdaBoost algorithm on Haar feature classifiers to find a sequence of classifiers f 1 , f 2 , . . . , f k {\displaystyle f_{1},f_{2},...,f_{k}} . Haar feature classifiers are crude, but allows very fast computation, and the modified AdaBoost constructs a strong classifier out of many weak ones. At run time, a given image I {\displaystyle I} is tested on f 1 ( I ) , f 2 ( I ) , . . . f k ( I ) {\displaystyle f_{1}(I),f_{2}(I),...f_{k}(I)} sequentially. If at any point, f i ( I ) = 0 {\displaystyle f_{i}(I)=0} , the algorithm immediately returns "no face detected". If all classifiers return 1, then the algorithm returns "face detected". For this reason, the Viola-Jones classifier is also called "Haar cascade classifier". === Haar feature classifiers === Consider a perceptron f w , b {\displaystyle f_{w,b}} defined by two variables w ( x , y ) , b {\displaystyle w(x,y),b} . It takes in an image I ( x , y ) {\displaystyle I(x,y)} of fixed resolution, and returns f w , b ( I ) = { 1 , if ∑ x , y w ( x , y ) I ( x , y ) + b > 0 0 , else {\displaystyle f_{w,b}(I)={\begin{cases}1,\quad {\text{if }}\sum _{x,y}w(x,y)I(x,y)+b>0\\0,\quad {\text{else}}\end{cases}}} A Haar feature classifier is a perceptron f w , b {\displaystyle f_{w,b}} with a very special kind of w {\displaystyle w} that makes it extremely cheap to calculate. Namely, if we write out the matrix w ( x , y ) {\displaystyle w(x,y)} , we find that it takes only three possible values { + 1 , − 1 , 0 } {\displaystyle \{+1,-1,0\}} , and if we color the matrix with white on + 1 {\displaystyle +1} , black on − 1 {\displaystyle -1} , and transparent on 0 {\displaystyle 0} , the matrix is in one of the 5 possible patterns shown on the right. Each pattern must also be symmetric to x-reflection and y-reflection (ignoring the color change), so for example, for the horizontal white-black feature, the two rectangles must be of the same width. For the vertical white-black-white feature, the white rectangles must be of the same height, but there is no restriction on the black rectangle's height. ==== Rationale for Haar features ==== The Haar features used in the Viola-Jones algorithm are a subset of the more general Haar basis functions, which have been used previously in the realm of image-based object detection. While crude compared to alternatives such as steerable filters, Haar features are sufficiently complex to match features of typical human faces. For example: The eye region is darker than the upper-cheeks. The nose bridge region is brighter than the eyes. Composition of properties forming matchable facial features: Location and size: eyes, mouth, bridge of nose Value: oriented gradients of pixel intensities Further, the design of Haar features allows for efficient computation of f w , b ( I ) {\displaystyle f_{w,b}(I)} using only constant number of additions and subtractions, regardless of the size of the rectangular features, using the summed-area table. === Learning and using a Viola–Jones classifier === Choose a resolution ( M , N ) {\displaystyle (M,N)} for the images to be classified. In the original paper, they recommended ( M , N ) = ( 24 , 24 ) {\displaystyle (M,N)=(24,24)} . ==== Learning ==== Collect a training set, with some containing faces, and others not containing faces. Perform a certain modified AdaBoost training on the set of all Haar feature classifiers of dimension ( M , N ) {\displaystyle (M,N)} , until a desired level of precision and recall is reached. The modified AdaBoost algorithm would output a sequence of Haar feature classifiers f 1 , f 2 , . . . , f k {\displaystyle f_{1},f_{2},...,f_{k}} . The details of the modified AdaBoost algorithm is detailed below. ==== Using ==== To use a Viola-Jones classifier with f 1 , f 2 , . . . , f k {\displaystyle f_{1},f_{2},...,f_{k}} on an image I {\displaystyle I} , compute f 1 ( I ) , f 2 ( I ) , . . . f k ( I ) {\displaystyle f_{1}(I),f_{2}(I),...f_{k}(I)} sequentially. If at any point, f i ( I ) = 0 {\displaystyle f_{i}(I)=0} , the algorithm immediately returns "no face detected". If all classifiers return 1, then the algorithm returns "face detected". === Learning algorithm === The speed with which features may be evaluated does not adequately compensate for their number, however. For example, in a standard 24x24 pixel sub-window, there are a total of M = 162336 possible features, and it would be prohibitively expensive to evaluate them all when testing an image. Thus, the object detection framework employs a variant of the learning algorithm AdaBoost to both select the best features and to train classifiers that use them. This algorithm constructs a "strong" classifier as a linear combination of weighted simple “weak” classifiers. h ( x ) = sgn ( ∑ j = 1 M α j h j ( x ) ) {\displaystyle h(\mathbf {x} )=\operatorname {sgn} \left(\sum _{j=1}^{M}\alpha _{j}h_{j}(\mathbf {x} )\right)} Each weak classifier is a threshold function based on the feature f j {\displaystyle f_{j}} . h j ( x ) = { − s j if f j < θ j s j otherwise {\displaystyle h_{j}(\mathbf {x} )={\begin{cases}-s_{j}&{\text{if }}f_{j}<\theta _{j}\\s_{j}&{\text{otherwise}}\end{cases}}} The threshold value θ j {\displaystyle \theta _{j}} and the polarity s j ∈ ± 1 {\displaystyle s_{j}\in \pm 1} are determined in the training, as well as the coefficients α j {\displaystyle \alpha _{j}} . Here a simplified version of the lea