AI Headshot Enhancer

AI Headshot Enhancer — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Automatic acquisition of lexicon

  Automatic acquisition of lexicon is a computerized process used for the development of a complex morphological lexicon of a language. The lexicon is essential for the NLP (Natural language processing), as well as a prerequisite to any wide-coverage parser. The two main requirements represent raw corpus and the morphological description of the language. The aim is to provide lemmas that will serve to the explanation of all the words that occur within the corpus. For the achievement of a quality lexicon it is necessary to manually validate the generated lemmas and iterate the whole process several times. The process is focused on the open word classes (e.g. nouns, adjectives, verbs). Closed classes (e.g. prepositions, pronouns, numerals) are excluded. This method is applicable to the languages with a rich morphology, such as Slovak, Russian or Croatian. Applied to Slovak, being an inflectional language, the automatic acquisition focuses on the inflectional morphology as well as on the derivational morphology. This fact enables the users to find out the information about derivational relations (e.g. adjectivizations, prefixes) in the lexicon. For example, Slovak word korpusový is an adjectivization of korpus (eng. corpus). == Three-step loop == Conformably to Benoît Sagot, there are three stages involved in the acquisition of lemmas: Generation and inflection Ranking Manual validation The more iteration will be performed, the more accurate lexicon will be obtained. For each iteration are essential the information given by a manual validator. === Generation and inflection === Firstly, all words which represent the closed word classes (pronouns, prepositions, numerals) are manually excluded from the given corpus. Number of their occurrences in the corpus is provided. Then the automatic generation comes, when the hypothetical lemmas according to the morphological description of a language are created. Generated lemmas are consequently being inflected, so that all of their inflected forms are built. Obtained forms are associated with the corresponding lemma and a morphological tag. === Ranking === There was created a probabilistic model, represented by a fix-point algorithm, to rank the hypothetical lemmas generated in the first step. Best ranked lemmas are expected to be ideally all correct, whereas the least ranked tend to be incorrect. === Manual validation === Correctness of the best- ranked lemmas created in the previous step are checked by the manual validator, who should be a native speaker. Lemmas are at this stage divided into three categories: valid lemmas, appended to lexicon erroneous lemmas generated by valid forms (later associated to another lemmas) erroneous lemmas generated by invalid forms (these need to be excluded) == Future development == Automatic acquisition, in comparison to a purely manual development of the lexicons, seems to be promising, considering the future development, because of the short validation time needed and the relatively small amount of human labor involved.

  Read more →
• 

  Cover (telecommunications)

  In telecommunications and tradecraft, cover is the technique of concealing or altering the characteristics of communications patterns for the purpose of denying an unauthorized receiver information that would be of value. The purpose of cover is not to make the communication secure, but to make it look like noise, rendering it uninteresting and not worth analysis. Even if an attacker recognizes the communication as interesting, cover makes traffic analysis more difficult since he must crack the cover before he can find out to whom it is addressed. Usually, the covered communication is also encrypted. In this way, enemies have no idea you sent a message; friends know you sent a message, but don't know what you said; the intended recipient knows what you said. Technically, cover sometimes refers to the specific process of modulo two additions of a pseudorandom bit stream generated by a cryptographic device with bits from the control message. Source: from Federal Standard 1037C and from MIL-STD-188

  Read more →
• 

  Data marketplace

  Data marketplace is an online platform for sharing and consuming data in the form of data assets or data products. Part of the data management stack, it aims to bring together data producers and data consumers (including business users and AI) in a single space, with the objective of increasing access to understandable, high-quality data. Included within its Data Marketplaces and Exchange (DME) category by Gartner, data marketplaces can provide data internally within an organization, externally with partners, or as open data. == Concept == Digitization has dramatically increased data volumes within organizations, with IDC predicting that by 2025 the world will contain 175 zettabytes of data. This has created a need to both manage this data and provide access to it to enable business intelligence and data analysis. However, data is often scattered within multiple systems (such as data warehouses and data lakes), and is in formats that are only understandable by technical experts, such as data scientists. According to IDC, 81% of IT leaders cite data silos as a major barrier to digital transformation. This means that data is not freely available to business users or external audiences such as partners or citizens, limiting its value, and holding back AI deployments. Data marketplaces solve this issue, providing seamless, self-service access to high-quality data in an understandable, secure and auditable manner. They break down data silos, reduce friction in data access, and enable a broader range of users, including non-technical profiles, to find, understand, and consume data autonomously. Data assets on the marketplace can be raw data, data visualizations or data products. Data marketplaces combine data management functions such as data governance with the user-friendly experience offered by e-commerce marketplaces in order to increase the usage of data. These include features such as powerful search engines, feedback, ratings, subscriptions and product description sheets. According to Gartner, data marketplaces provide infrastructure, transactional capabilities, and services for both consumers and providers of data assets. == History and timeline == Data marketplaces have evolved since they first emerged in terms of both their scope and usage. === 2000s === With the rise of the internet, data brokers began collecting, aggregating, distributing and selling personal, financial and marketing data to third parties online. Data marketplaces were deployed to monetize this data, making it discoverable and accessible to users, either through subscriptions or one-off purchases. At the same time, regulations, such as the US Open Government Initiative of 2009 and others around the world mandated greater transparency and data sharing with the public. Data sharing portals were created by public and government bodies to make this information available through self-service to all users. === 2010s === Due to the growth of big data and cloud platforms, cloud-based data exchange platforms emerged. These were offered by major infrastructure providers, and included Amazon Web Services (AWS) Data Exchange, Snowflake Data Marketplace, and the Google Cloud Platform. These platforms moved beyond simple data brokerage or open data by providing structured, catalogued data sharing between organizations. === 2020s === Driven by a need to increase internal data sharing with both business users and AI, organizations are now looking to adopt internal data marketplaces. These aim to democratize data consumption by providing seamless access for all employees and AI to trusted data, including data products, through an intuitive, e-commerce style experience. According to Gartner analyst Richa Jha, "by providing a single, governed platform for discovering, sharing, and scaling data products, data marketplaces drive productivity, collaboration, and ROI across the enterprise." == Data marketplaces within the overall data architecture == Data marketplaces provide a consumption and collaboration layer for data. That means they complement and integrate with other parts of the overall data architecture, including: === Data warehouses and data lakes === Data marketplaces connect to data sources, such as data warehouses or data lakes, to provide intuitive access to the data stored within them, enabling data to be shared and distributed to non-technical audiences. Access can be direct, with data and data products stored within the data marketplace or virtualized. === Data catalog === A data catalog provides a technical inventory of an organization's data estate. It collects technical information on all available data assets within an organization, based on metadata descriptions. This ensures traceability, and supports compliance and governance requirements. Unlike a data marketplace, a data catalog does not provide access to data, and is designed to be used by data professionals, rather than the business. This means it lacks an intuitive, understandable interface and is consequently not easily accessible by business users. === Data mesh === Data mesh is an architecture and framework for data management, first defined by Zhamak Dehghani in 2019. It aims to decentralize data ownership to delegate responsibility, empowering teams and focusing on delivering data to users in the form of self-service data products. The data marketplace is a central pillar of data mesh, providing intuitive access to these data products, and creating a collaboration space for data owners and data consumers. === Data product === Data products are high-value, consumable data assets that package high-quality data and associated tools to enable seamless usage by business users at scale. First defined by McKinsey in 2022, they have an identified owner, a service level agreement (SLA), and a reusability logic. == Core components of a data marketplace == A data marketplace typically includes specific core components: === E-commerce style interface === An e-commerce style experience that engages non-technical users, minimizes the need for training and builds confidence and trust in data. Look and feel should be customizable to incorporate corporate design guidelines to ensure consistency with other organizational applications. === Built-in data catalog === As in a standalone data catalog, this indexes all available data, based on metadata that includes type, source, owner, freshness, and quality level. === Discovery and search engine === This enables users to search, filter, explore and discover available data intuitively. As in an e-commerce marketplace, it should be intelligent, and provide relevant results based on natural language queries. === Access control and security management === Data marketplaces will contain data that needs to be protected under regulations such as the General Data Protection Regulation (GDPR) in Europe, the California Consumer Privacy Act (CCPA) in the United States, and sector-specific frameworks in industries such as finance and healthcare. To ensure both security and compliance while maximizing data consumption, the data marketplace should include granular access management and a full audit trail. === Semantic layer and business glossary === Different parts of the business are likely to use different terms to describe data. This leads to inconsistencies and an inability to share data across systems and teams. The semantic layer and business glossary standardize a shared vocabulary and common definitions of business indicators and concepts, providing a single language for data across the business and for AI agents. === Data governance mechanisms === These enforce corporate data governance policies, ensuring data traceability through data lineage, quality certification, usage monitoring, and continuous improvement through user feedback loops. === Collaboration features === As on an e-commerce website, a data marketplace should provide collaboration features that bring together data users and data owners. This includes the ability to rate data products, share use cases, and provide feedback to data owners, creating a community around data and supporting a data-driven culture. == Types of data marketplace == While they share the same underlying technology, data marketplaces can be deployed in three broad ways: === Internal data marketplaces === These bring together data from across an organization and make it available via self-service to employees from across the business. They aim to widen access to data and consequently to improve decision-making and reporting, increase performance and maximize efficiency. === Ecosystem data marketplaces === These extend sharing beyond a single organization, enabling multiple partners (public institutions, industry players, research bodies) to share and consume data within a governed framework. Data can be provided by all parties or simply by one organization and consumed by others. Ecosystem data marketplaces are particularly relevant in

  Read more →
• 

  Factorization of polynomials over finite fields

  In mathematics and computer algebra the factorization of a polynomial consists of decomposing it into a product of irreducible factors. This decomposition is theoretically possible and is unique for polynomials with coefficients in any field, but rather strong restrictions on the field of the coefficients are needed to allow the computation of the factorization by means of an algorithm. In practice, algorithms have been designed only for polynomials with coefficients in a finite field, in the field of rationals or in a finitely generated field extension of one of them. All factorization algorithms, including the case of multivariate polynomials over the rational numbers, reduce the problem to this case; see polynomial factorization. It is also used for various applications of finite fields, such as coding theory (cyclic redundancy codes and BCH codes), cryptography (public key cryptography by the means of elliptic curves), and computational number theory. As the reduction of the factorization of multivariate polynomials to that of univariate polynomials does not have any specificity in the case of coefficients in a finite field, only polynomials with one variable are considered in this article. == Background == === Finite field === The theory of finite fields, whose origins can be traced back to the works of Gauss and Galois, has played a part in various branches of mathematics. Due to the applicability of the concept in other topics of mathematics and sciences like computer science there has been a resurgence of interest in finite fields and this is partly due to important applications in coding theory and cryptography. Applications of finite fields introduce some of these developments in cryptography, computer algebra and coding theory. A finite field or Galois field is a field with a finite order (number of elements). The order of a finite field is always a prime or a power of prime. For each prime power q = pr, there exists exactly one finite field with q elements, up to isomorphism. This field is denoted GF(q) or Fq. If p is prime, GF(p) is the prime field of order p; it is the field of residue classes modulo p, and its p elements are denoted 0, 1, ..., p−1. Thus a = b in GF(p) means the same as a ≡ b (mod p). === Irreducible polynomials === Let F be a finite field. As for general fields, a non-constant polynomial f in F[x] is said to be irreducible over F if it is not the product of two polynomials of positive degree. A polynomial of positive degree that is not irreducible over F is called reducible over F. Irreducible polynomials allow us to construct the finite fields of non-prime order. In fact, for a prime power q, let Fq be the finite field with q elements, unique up to isomorphism. A polynomial f of degree n greater than one, which is irreducible over Fq, defines a field extension of degree n which is isomorphic to the field with qn elements: the elements of this extension are the polynomials of degree lower than n; addition, subtraction and multiplication by an element of Fq are those of the polynomials; the product of two elements is the remainder of the division by f of their product as polynomials; the inverse of an element may be computed by the extended GCD algorithm (see Arithmetic of algebraic extensions). It follows that, to compute in a finite field of non prime order, one needs to generate an irreducible polynomial. For this, the common method is to take a polynomial at random and test it for irreducibility. For sake of efficiency of the multiplication in the field, it is usual to search for polynomials of the shape xn + ax + b. Irreducible polynomials over finite fields are also useful for pseudorandom number generators using feedback shift registers and discrete logarithm over F2n. The number of irreducible monic polynomials of degree n over Fq is the number of aperiodic necklaces, given by Moreau's necklace-counting function Mq(n). The closely related necklace function Nq(n) counts monic polynomials of degree n which are primary (a power of an irreducible); or alternatively irreducible polynomials of all degrees d which divide n. === Example === The polynomial P = x4 + 1 is irreducible over Q but not over any finite field. On any field extension of F2, P = (x + 1)4. On every other finite field, at least one of −1, 2 and −2 is a square, because the product of two non-squares is a square and so we have If − 1 = a 2 , {\displaystyle -1=a^{2},} then P = ( x 2 + a ) ( x 2 − a ) . {\displaystyle P=(x^{2}+a)(x^{2}-a).} If 2 = b 2 , {\displaystyle 2=b^{2},} then P = ( x 2 + b x + 1 ) ( x 2 − b x + 1 ) . {\displaystyle P=(x^{2}+bx+1)(x^{2}-bx+1).} If − 2 = c 2 , {\displaystyle -2=c^{2},} then P = ( x 2 + c x − 1 ) ( x 2 − c x − 1 ) . {\displaystyle P=(x^{2}+cx-1)(x^{2}-cx-1).} === Complexity === Polynomial factoring algorithms use basic polynomial operations such as products, divisions, gcd, powers of one polynomial modulo another, etc. A multiplication of two polynomials of degree at most n can be done in O(n2) operations in Fq using "classical" arithmetic, or in O(nlog(n) log(log(n)) ) operations in Fq using "fast" arithmetic. A Euclidean division (division with remainder) can be performed within the same time bounds. The cost of a polynomial greatest common divisor between two polynomials of degree at most n can be taken as O(n2) operations in Fq using classical methods, or as O(nlog2(n) log(log(n)) ) operations in Fq using fast methods. For polynomials h, g of degree at most n, the exponentiation hq mod g can be done with O(log(q)) polynomial products, using exponentiation by squaring method, that is O(n2log(q)) operations in Fq using classical methods, or O(nlog(q)log(n) log(log(n))) operations in Fq using fast methods. In the algorithms that follow, the complexities are expressed in terms of number of arithmetic operations in Fq, using classical algorithms for the arithmetic of polynomials. == Factoring algorithms == Many algorithms for factoring polynomials over finite fields include the following three stages: Square-free factorization Distinct-degree factorization Equal-degree factorization An important exception is Berlekamp's algorithm, which combines stages 2 and 3. === Berlekamp's algorithm === Berlekamp's algorithm is historically important as being the first factorization algorithm which works well in practice. However, it contains a loop on the elements of the ground field, which implies that it is practicable only over small finite fields. For a fixed ground field, its time complexity is polynomial, but, for general ground fields, the complexity is exponential in the size of the ground field. === Square-free factorization === The algorithm determines a square-free factorization for polynomials whose coefficients come from the finite field Fq of order q = pm with p a prime. This algorithm firstly determines the derivative and then computes the gcd of the polynomial and its derivative. If it is not one then the gcd is again divided into the original polynomial, provided that the derivative is not zero (a case that exists for non-constant polynomials defined over finite fields). This algorithm uses the fact that, if the derivative of a polynomial is zero, then it is a polynomial in xp, which is, if the coefficients belong to Fp, the pth power of the polynomial obtained by substituting x by x1/p. If the coefficients do not belong to Fp, the pth root of a polynomial with zero derivative is obtained by the same substitution on x, completed by applying the inverse of the Frobenius automorphism to the coefficients. This algorithm works also over a field of characteristic zero, with the only difference that it never enters in the blocks of instructions where pth roots are computed. However, in this case, Yun's algorithm is much more efficient because it computes the greatest common divisors of polynomials of lower degrees. A consequence is that, when factoring a polynomial over the integers, the algorithm which follows is not used: one first computes the square-free factorization over the integers, and to factor the resulting polynomials, one chooses a p such that they remain square-free modulo p. Algorithm: SFF (Square-Free Factorization) Input: A monic polynomial f in Fq[x] where q = pm Output: Square-free factorization of f R ← 1 # Make w be the product (without multiplicity) of all factors of f that have # multiplicity not divisible by p c ← gcd(f, f′) w ← f/c # Step 1: Identify all factors in w i ← 1 while w ≠ 1 do y ← gcd(w, c) fac ← w / y R ← R · faci w ← y; c ← c / y; i ← i + 1 end while # c is now the product (with multiplicity) of the remaining factors of f # Step 2: Identify all remaining factors using recursion # Note that these are the factors of f that have multiplicity divisible by p if c ≠ 1 then c ← c1/p R ← R·SFF(c)p end if Output(R) The idea is to identify the product of all irreducible factors of f with the same multiplicity. This is done in two steps. The first step uses the formal d

  Read more →
• 

  Visual Turing Test

  The Visual Turing Test is “an operator-assisted device that produces a stochastic sequence of binary questions from a given test image”. The query engine produces a sequence of questions that have unpredictable answers given the history of questions. The test is only about vision and does not require any natural language processing. The job of the human operator is to provide the correct answer to the question or reject it as ambiguous. The query generator produces questions such that they follow a “natural story line”, similar to what humans do when they look at a picture. == History == Research in computer vision dates back to the 1960s when Seymour Papert first attempted to solve the problem. This unsuccessful attempt was referred to as the Summer Vision Project. The reason why it was not successful was because computer vision is more complicated than what people think. The complexity is in alignment with the human visual system. Roughly 50% of the human brain is devoted in processing vision, which indicates that it is a difficult problem. Later there were attempts to solve the problems with models inspired by the human brain. Perceptrons by Frank Rosenblatt, which is a form of the neural networks, was one of the first such approaches. These simple neural networks could not live up to their expectations and had certain limitations due to which they were not considered in future research. Later with the availability of the hardware and some processing power the research shifted to image processing which involves pixel-level operations, like finding edges, de-noising images or applying filters to name a few. There was some great progress in this field but the problem of vision which was to make the machines understand the images was still not being addressed. During this time the neural networks also resurfaced as it was shown that the limitations of the perceptrons can be overcome by Multi-layer perceptrons. Also in the early 1990s convolutional neural networks were born which showed great results on digit recognition but did not scale up well on harder problems. The late 1990s and early 2000s saw the birth of modern computer vision. One of the reasons this happened was due to the availability of key, feature extraction and representation algorithms. Features along with the already present machine learning algorithms were used to detect, localise and segment objects in Images. While all these advancements were being made, the community felt the need to have standardised datasets and evaluation metrics so the performances can be compared. This led to the emergence of challenges like the Pascal VOC challenge and the ImageNet challenge. The availability of standard evaluation metrics and the open challenges gave directions to the research. Better algorithms were introduced for specific tasks like object detection and classification. Visual Turing Test aims to give a new direction to the computer vision research which would lead to the introduction of systems that will be one step closer to understanding images the way humans do. == Current evaluation practices == A large number of datasets have been annotated and generalised to benchmark performances of difference classes of algorithms to assess different vision tasks (e.g., object detection/recognition) on some image domain (e.g., scene images). One of the most famous datasets in computer vision is ImageNet which is used to assess the problem of object level Image classification. ImageNet is one of the largest annotated datasets available and has over one million images. The other important vision task is object detection and localisation which refers to detecting the object instance in the image and providing the bounding box coordinates around the object instance or segmenting the object. The most popular dataset for this task is the Pascal dataset. Similarly there are other datasets for specific tasks like the H3D dataset for human pose detection, Core dataset to evaluate the quality of detected object attributes such as colour, orientation, and activity. Having these standard datasets has helped the vision community to come up with well performing algorithms for all these tasks. The next logical step is to create a larger task encompassing of these smaller subtasks. Having such a task would lead to building systems that would understand images, as understanding images would inherently involve detecting objects, localising them and segmenting them. == Details == The Visual Turing Test (VTT) unlike the Turing test has a query engine system which interrogates a computer vision system in the presence of a human co-ordinator. It is a system that generates a random sequence of binary questions specific to the test image, such that the answer to any question k is unpredictable given the true answers to the previous k − 1 questions (also known as history of questions). The test happens in the presence of a human operator who serves two main purposes: removing the ambiguous questions and providing the correct answers to the unambiguous questions. Given an Image infinite possible binary questions can be asked and a lot of them are bound to be ambiguous. These questions if generated by the query engine are removed by the human moderator and instead the query engine generates another question such that the answer to it is unpredictable given the history of the questions. The aim of the Visual Turing Test is to evaluate the Image understanding of a computer system, and an important part of image understanding is the story line of the image. When humans look at an image, they do not think that there is a car at ‘x’ pixels from the left and ‘y’ pixels from the top, but instead they look at it as a story, for e.g. they might think that there is a car parked on the road, a person is exiting the car and heading towards a building. The most important elements of the story line are the objects and so to extract any story line from an image the first and the most important task is to instantiate the objects in it, and that is what the query engine does. === Query engine === The query engine is the core of the Visual Turing Test and it comprises two main parts : Vocabulary and Questions ==== Vocabulary ==== Vocabulary is a set of words that represent the elements of the images. This vocabulary when used with appropriate grammar leads to a set of questions. The grammar is defined in the next section in a way that it leads to a space of binary questions. The vocabulary V {\displaystyle {\mathcal {V}}} consist of three components: Types of Objects T {\displaystyle {\mathcal {T}}} Type-dependent attributes of objects A ( t ) {\displaystyle {\mathcal {A}}(t)} Type-dependent relationships between two objects R ( t , t ′ ) {\displaystyle {\mathcal {R}}(t,t')} For Images of urban street scenes the types of objects include people, vehicle and buildings. Attributes refer to the properties of these objects, for e.g. female, child, wearing a hat or carrying something, for people and moving, parked, stopped, one tire visible or two tires visible for vehicles. Relationships between each pair of object classes can be either “ordered” or “unordered”. The unordered relationships may include talking, walking together and the ordered relationships include taller, closer to the camera, occluding, being occluded etc. Additionally all of this vocabulary is used in context of rectangular image regions w \in W which allow for the localisation of objects in the image. An extremely large number of such regions are possible and this complicates the problem, so for this test, regions at specific scales are only used which include 1/16 the size of image, 1/4 the size of image, 1/2 the size of image or larger. ==== Questions ==== The question space is composed of four types of questions: Existence questions: The aim of the existence questions is to find new objects in the image that have not been uniquely identified previously. They are of the form : Qexist = 'Is there an instance of an object of type t with attributes A partially visible in region w that was not previously instantiated?' Uniqueness questions: A uniqueness question tries to uniquely identify an object to instantiate it. Quniq = 'Is there a unique instance of an object of type t with attributes A partially visible in region w that was not previously instantiated?' The uniqueness questions along with the existence questions form the instantiation questions. As mentioned earlier instantiating objects leads to other interesting questions and eventually a story line. Uniqueness questions follow the existence questions and a positive answer to it leads to instantiation of an object. Attribute questions: An attribute question tries to find more about the object once it has been instantiated. Such questions can query about a single attribute, conjunction of two attributes or disjunction of two attributes. Qatt(ot) = {'Does object ot have attribute a?' , 'Does object

  Read more →
• 

  Talim (textiles)

  Talim (Kashmiri: تعليم, Kashmiri pronunciation: [t̪əːliːm], Urdu: تَعْلِیم, Arabic: تعليم, pronounced [taʕ.liːm] ) in textiles is a symbolic code and system of notation that facilitates the creation of intricate patterns in fabrics, such as shawls and carpets, and the written coded plans that include colour schemes and weaving instructions. The term is used in traditional hand-weaving in the Indian subcontinent. Talim was initially used to create certain types of patterns in Kashmiri shawls, and later came to be applied in the production of carpets. == Etymology and origin == The term talim, which refers to a symbolic code and system of notation used by shawl and carpet artisans in their weaving processes, came to the Urdu language from the Arabic noun taʻlim (تعليم), which means "authoritative instruction", "teaching", or "edification". It means the same in Urdu and Kashmiri. The Arabic noun originated from the second form of the Arabic root verb ʻalima (علم), which means "to know". According to a local belief in Kashmir, talim was introduced to them by Persian scholar and Sufi Muslim saint Mir Sayyid Ali Hamadani. The belief notwithstanding, talim might have originated from Kashmir; Amritsar was the only place outside of Srinagar where talim was used, by migrated Kashmiri artisans. == Technique == Whereas carpets are generally woven horizontally, providing weavers with a clear view of the progress they are making in creating designs, in Kashmir, carpets are woven vertically, so the weaver is reliant on the talim. The talim technique forms fabrics by passing the weft thread as per a given script that has design codes. Weavers use talim to weave the desired pattern with planned colours. Talim involves teamwork when applying the technique, as the process of creating intricate fabric designs in weaving begins with the Naqash (designer, who designs using pencils on graphs) meticulously crafting the design on a blank sheet of paper called a naska, and the master, Talim guru, making the colour codes and symbols for weft yarns that would interlace the warp to construct the desired design. He writes on a long strip of paper, in specific symbols, the colour codes, and the number of knots to be woven with each colour. Taraha guru collaborates with talim guru and is known as the artisan responsible for determining the colours. Talim uthana is a process or the act of "picking the codes" from the graph. A clerk called the Talim Navis would record the step-by-step instructions for these numbers and colours, and thousands of low-paid and interchangeable weavers would read or recite the record to carry out the design. Afterward, a talim copyist makes copies, which are needed when multiple looms weave the same product. The script, which has been encoded, is deciphered and translated according to the specific guidelines of weavers in order to incorporate the design that is included within it. Talim has been compared to "hieroglyphics" or as a "notational-cum-cryptographic system", as it is challenging to decipher and is unique to the shawls of Kashmir, which requires expertise to comprehend. According to researcher Gagan Deep Kaur, "The talim is widely held to be a trade secret of the community and has always been fiercely guarded by the owners." Those who use talim for shawl-making do not assign important tasks to women, because of the fear that the technique and knowledge may be divulged to other communities when the women are sent there to be married. The coded cards known as talim in the Kashmiri language were used for creating certain types of patterns in shawl weaving. The talim technique is employed in the creation of kani shawls, which originated from the Kanihama region of the Kashmir valley. Carpet weaving adapted the technique from shawl making. When Kashmiri artisans started to create carpets, they chose to continue using the talim rather than switching to a different method. The resurgence of the carpet industry in Amritsar during the last century resulted in the prevalent use of the talim technique among the local weavers, a majority of whom hailed from the region of Kashmir. === Recitation of codes === Talim was also communicated through recitation accompanied by a melodic chant or song. In traditional weaving practices, the use of chanting was common. The movement of the shuttles was synchronised with the song of the weaver, adding a musical rhythm to the instructions represented through hieroglyphics. The weaver's chant, "Two blue, one red, three yellow, two blue," served as a guide as they wove and replicated the designated pattern. == Usage == The first factories established in Amritsar around 1860 utilised Bokhara designs. However, Kashmiri weavers maintained their traditional techniques and employed the talim, instead of a cartoon, for tying knots. As a result, Amritsar became the second location in the Indian subcontinent to use the talim. The traditional weaving practices are still carried out in some parts of the Indian subcontinent. The exact date when talim was last used in the subcontinent varies depending on the region and the specific weaving community. Indian textile historian Jasleen Dhamija wrote in her 1989 book Handwoven Fabrics of India that there were still some weavers in the Kashmiri village of Kanihama who applied talim in weaving shawls. As of 2022, the carpet weavers in Kashmir were the only remaining users of talim in carpets, according to Zubair Ahmed, director of the Indian Institute of Carpet Technology. The institute aims to preserve traditional Kashmiri carpet designs by digitising talim and training weavers in the technique. == Gallery ==

  Read more →
• 

  Frame (networking)

  A frame is a digital data transmission unit in computer networking and telecommunications. In packet switched systems, a frame is a simple container for a single network packet. In other telecommunications systems, a frame is a repeating structure supporting time-division multiplexing. A frame typically includes frame synchronization features consisting of a sequence of bits or symbols that indicate to the receiver the beginning and end of the payload data within the stream of symbols or bits it receives. If a receiver is connected to the system during frame transmission, it ignores the data until it detects a new frame synchronization sequence. == Packet switching == In the OSI model of computer networking, a frame is the protocol data unit at the data link layer. Frames are the result of the final layer of encapsulation before the data is transmitted over the physical layer. A frame is "the unit of transmission in a link layer protocol, and consists of a link layer header followed by a packet." Each frame is separated from the next by an interframe gap. A frame is a series of bits generally composed of frame synchronization bits, the packet payload, and a frame check sequence. Examples are Ethernet frames, Wi-Fi frames, 4G frames, Point-to-Point Protocol (PPP) frames, Fibre Channel frames, and V.42 modem frames. Often, frames of several different sizes are nested inside each other. For example, when using Point-to-Point Protocol (PPP) over asynchronous serial communication, the eight bits of each individual byte are framed by start and stop bits, the payload data bytes in a network packet are framed by the header and footer, and several packets can be framed with frame boundary octets. == Time-division multiplex == In telecommunications, specifically in time-division multiplex (TDM) and time-division multiple access (TDMA) variants, a frame is a cyclically repeated data block that consists of a fixed number of time slots, one for each logical TDM channel or TDMA transmitter. In this context, a frame is typically an entity at the physical layer. TDM application examples are SONET/SDH and the ISDN circuit-switched B-channel, while TDMA examples are Circuit Switched Data used in early cellular voice services. The frame is also an entity for time-division duplex, where the mobile terminal may transmit during some time slots and receive during others.

  Read more →
• 

  Voice inversion

  Voice inversion scrambling is an analog method of obscuring the content of a transmission. It is sometimes used in public service radio, automobile racing, cordless telephones and the Family Radio Service. Without a descrambler, the transmission makes the speaker "sound like Donald Duck". Despite the term, the technique operates on the passband of the information and so can be applied to any information being transmitted. == Forms and details == There are various forms of voice inversion which offer differing levels of security. Overall, voice inversion scrambling offers little true security as software and even hobbyist kits are available from kit makers for scrambling and descrambling. The cadence of the speech is not changed. It is often easy to guess what is happening in the conversation by listening for other audio cues like questions, short responses and other language cadences. In the simplest form of voice inversion, the frequency p {\displaystyle p} of each component is replaced with s − p {\displaystyle s-p} , where s {\displaystyle s} is the frequency of a carrier wave. This can be done by amplitude modulating the speech signal with the carrier, then applying a low-pass filter to select the lower sideband. This will make the low tones of the voice sound like high ones and vice versa. This process also occurs naturally if a radio receiver is tuned to a single sideband transmission but set to decode the wrong sideband. There are more advanced forms of voice inversion which are more complex and require more effort to descramble. One method is to use a random code to choose the carrier frequency and then change this code in real time. This is called Rolling Code voice inversion and one can often hear the "ticks" in the transmission which signal the changing of the inversion point. Another method is split band voice inversion. This is where the band is split and then each band is inverted separately. A rolling code can also be added to this method for variable split band inversion (VSB). Common carrier frequencies are: 2.632 kHz, 2.718 kHz, 2.868 kHz, 3.023 kHz, 3.107 kHz, 3.196 kHz, 3.333 kHz, 3.339 kHz, 3.496 kHz, 3.729 kHz and 4.096 kHz. Voice inversion offers no security at all and software is available to restore the original voice, which is why it is no longer used to protect conversations today. However, voice inversion is still found in low-end Chinese walkie talkies.

  Read more →
• 

  Cuboid (computer vision)

  In computer vision, the term cuboid is used to describe a small spatiotemporal volume extracted for purposes of behavior recognition. The cuboid is regarded as a basic geometric primitive type and is used to depict three-dimensional objects within a three dimensional representation of a flat, two dimensional image. == Production == Cuboids can be produced from both two-dimensional and three-dimensional images. One method used to produce cuboids utilizes scene understanding (SUN) primitive databases, which are collections of pictures that already contain cuboids. By sorting through SUN primitive databases with machine learning tools, computers observe the conditions in which cuboids are produced in images from SUN primitive databases and can learn to produce cuboids from other images. RGB-D images, which are RGB images that also record the depth of each pixel, are occasionally used to produce cuboids because computers no longer need to determine the depth of an object, as they typically do because depth is already recorded. Cuboid production is sensitive to changes in color and illumination, blockage, and background clutter. This means that it is difficult for computers to produce cuboids of objects that are multicolored, irregularly illuminated, or partially covered, or if there are many objects in the background. This is partially due to the fact that algorithms for producing cuboids are still relatively simple. == Usage == Cuboids are created for point cloud-based three-dimensional maps and can be utilized in various situations such as augmented reality, the automated control of cars, drones, and robots, and object detection. Cuboids allow for software to identify a scene through geometric descriptions in an “object-agnostic” fashion. Interest points, locations within images that are identified by a computer as essential to identifying the image, created from two-dimensional images can be used with cuboids for image matching, identifying a room or scene, and instance recognition. Interest points created from three dimensional images can be used with cuboids to recognize activities. This is possible because interest points aid software to focus on only the most important aspects of the images. RGB-D images and SLAM systems are used together in RGB-D SLAM systems, which are employed by Computer-aided design systems to generate point cloud-based three-dimensional maps. Most industrial multi-axis machining tools use computer-aided manufacturing and subsequently work in cuboid work spaces.

  Read more →
• 

  Professional network service

  A professional network service (or, in an Internet context, simply a professional network) is a type of social network service that focuses on interactions and relationships for business opportunities and career growth, with less emphasis on activities in personal life. A professional network service is used by working individuals, job-seekers, and businesses to establish and maintain professional contacts, to find work or hire employees, share professional achievements, sell or promote services, and stay up-to-date with industry news and trends. According to LinkedIn managing director Clifford Rosenberg in an interview with AAP in 2010, "[t]his is a call to action for professionals to re-address their use of social networks and begin to reap as many rewards from networking professionally as they do personally." Businesses mostly depend on resources and information outside the company and to get what they need, they need to reach out and professionally network with others, such as employees or clients as well as potential opportunities. "Nardi, Whittaker, and Schwarz (2002) point out three main tasks that they believe networkers need to attend to keep a successful professional (intentional) network: building a network, maintaining the network, and activating selected contacts. They stress that networkers need to continue to add new contacts to their network to access as many resources as possible and to maintain their network by staying in touch with their contacts. This is so that the contacts are easy to activate when the networker has work that needs to be done." By using a professional network service, businesses can keep all of their networks up-to-date, and in order, and helps figure out the best way to efficiently get in touch with each of them. A service that can do all that helps relieve some of the stress when trying to get things done. Not all professional network services are online sites that help promote a business. Some services connect the user to other services that help promote the business other than online sites, such as phone/Internet companies that provide services and companies that specifically are designed to do all of the promoting, online and in person, for a business. == History == In 1997, professional network services started up throughout the world and continue to grow. The first recognizable site to combine all features, such as creating profiles, adding friends, and searching for friends, was SixDegrees.com. According to Boyd and Ellison's article, "Social Network Sites: Definition, History, and Scholarship", from 1997 to 2001, several community tools began supporting various combinations of profiles and publicly articulated Friends. Boyd and Ellison go on to say that the next wave began with Ryze.com in 2001. It was introduced as a new way "to help people leverage their business networks". == Inside the works == Quite a lot of work is put into a professional network service, such as the number of hours that go into them and the type of people they work for, as well as the business model of it all, such as the professional interaction and the multiple services they deal with. === Types of services === Some professional network services not only help promote the business but can also help in connecting to other people. Those services may include a specific phone and/or Internet company or a company that helps to connect with other businesses. According to the Society for New Communications Research (SNCR), there are at least nine online professional networks that are being used. === Professional interaction === Kaplan and Haenlein elaborate on five key considerations for companies when utilizing media. These include the importance of careful selection, the option to choose existing applications or develop custom ones, ensuring alignment with organizational activities, integrating a comprehensive media plan, and providing accessibility to all stakeholders. ==== Choose carefully ==== "Choosing the right medium for any given purpose depends on the target group to be reached and the message to be communicated. On one hand, each Social Media application usually attracts a certain group of people, and firms should be active wherever their customers are present. On the other hand, there may be situations whereby certain features are necessary to ensure effective communication, and these features are only offered by one specific application." ==== Ensure activity alignment ==== "Sometimes you may decide to rely on various Social Media, or a set of different applications within the same group, to have the largest possible reach." "Using different contact channels can be a worthwhile and profitable strategy." According to the Society for New Communications Research at Harvard University, "the average professional belongs to 3–5 online networks for business use, and LinkedIn, Facebook, and Twitter are among the top used." ==== Integrate a media plan ==== Social media and traditional media are "both part of the same: your corporate image" in the customers' eyes. ==== Allow access to all ==== "...once the firm has decided to utilize Social Media applications, it is worth checking that all employees may access them." According to the SNCR, "the convergence of Internet, mobile, and social media has taken significant shape as professionals rely on anywhere access to information, relationships, and networks." ==== Online usage ==== "Half of the respondents report participating in 3 to 5 online professional networks. Another three in ten participate in 6 or more professional networks." "Popular social networks are now being used frequently as Professional Communities. More than nine in ten respondents indicated that they use LinkedIn and half reported using Facebook. Twitter and blogs were frequently listed as 'professional networks'." === Business model === According to Michael Rappa's article, Business models on the Web", "a business model is the method of doing business by which a company can sustain itself – that is, generate revenue. The business model spells out how a company makes money by specifying where it is positioned in the value chain." Rappa mentions that there are at least nine basic categories from which a business model can be separated. Those categories are a brokerage, advertising, infomediary, merchant, manufacturer, affiliate, community, subscription, and utility. "...a firm may combine several different models as part of its overall Internet business strategy." At first, Flickr started as a way to mainstream public relations. == Social impact == When it comes to the social impact that professional network services have on today's society, it has proved to increase activity. According to the SNCR, "[t]hree quarters of respondents rely on professional networks to support business decisions. Reliance has increased for essentially all respondents over the past three years. Younger (20–35) and older professionals (55+) are more active users of social tools than middle-aged professionals. More people are collaborating outside their company wall than within their organizational intranet." == Limitations == Since the internet and social media are a part of this "world where consumers can speak so freely with each other and businesses have increasingly less control over the information available about them in cyberspace", most firms and businesses are uncomfortable with all the freedom. According to Kaplan and Haenlein's article, "Users of the world, unite! The challenges and opportunities of Social Media", businesses are pushed aside and are only able to sit back and watch as their customers publicly post comments, which may or may not be well-written.

  Read more →
• 

  Data

  Data ( DAY-tə, US also DAT-ə, India: DEE-tə) is a collection of discrete or continuous values that conveys information, describing the quantity, quality, fact, statistics, other basic units of meaning, or simply sequences of symbols that may be further interpreted formally. A data point or datum is an individual value in a collection of data. Data is usually organized into structures such as tables that provide additional context and meaning, and may itself be used as data in larger structures. Data may be used as variables in a computational process. Data may represent abstract ideas or concrete measurements. Data is commonly used in scientific research, economics, and virtually every other form of human organizational activity. Examples of data sets include price indices (such as the consumer price index), unemployment rates, literacy rates, and census data. In this context, data represents the raw facts and figures from which useful information can be extracted. Data is collected using techniques such as measurement, observation, query, or analysis, and is typically represented as numbers or characters that may be further processed. Field data is data that is collected in an uncontrolled, in-situ environment. Experimental data is data that is generated in the course of a controlled scientific experiment. Data is analyzed using techniques such as calculation, reasoning, discussion, presentation, visualization, or other forms of post-analysis. Prior to analysis, raw data (or unprocessed data) is typically cleaned: Outliers are removed, and obvious instrument or data entry errors are corrected. Data can be seen as the smallest unit of factual information that can be used as a basis for calculation, reasoning, or discussion. Data can range from abstract ideas to concrete measurements, including, but not limited to, statistics. Thematically connected data presented in some relevant context can be viewed as information. Contextually connected pieces of information can then be described as data insights or intelligence. The stock of insights and intelligence that accumulate over time, resulting from the synthesis of data into information, can then be described as knowledge. Data has been described as "the new oil of the digital economy". Data, as a general concept, refers to the fact that some existing information or knowledge is represented or coded in some form suitable for better usage or processing. Advances in computing technologies have led to the advent of big data, which generally refers to very large quantities of data, typically at the petabyte scale. If restricted to traditional data analysis methods and computing, working with such large (and growing) datasets is difficult, even impossible. In response, the relatively new field of data science uses machine learning (and other artificial intelligence) methods that allow for efficient applications of analytic methods to big data. == Etymology and terminology == The Latin word data is the plural of datum, "(thing) given," and the neuter past participle of dare, "to give". The first English use of the word "data" is from the 1640s. The word "data" was first used to mean "transmissible and storable computer information" in 1946. The expression "data processing" was first used in 1954. When "data" is used more generally as a synonym for "information", it is treated as a mass noun in singular form. This usage is common in everyday language and in technical and scientific fields such as software development and computer science. One example of this usage is the term "big data". When used more specifically to refer to the processing and analysis of sets of data, the term retains its plural form. This usage is common in the natural sciences, life sciences, social sciences, software development and computer science, and grew in popularity in the 20th and 21st centuries. Some style guides do not recognize the different meanings of the term and simply recommend the form that best suits the target audience of the guide. For example, APA style as of the 7th edition requires "data" to be treated as a plural form. == Meaning == Data, information, knowledge, and wisdom are closely related concepts, but each has its role concerning the other, and each term has its meaning. According to a common view, data is collected and analyzed; data only becomes information suitable for making decisions once it has been analyzed in some fashion. One can say that the extent to which a set of data is informative to someone depends on the extent to which it is unexpected by that person. The amount of information contained in a data stream may be characterized by its Shannon entropy. Knowledge is the awareness of its environment that some entity possesses, whereas data merely communicates that knowledge. For example, the entry in a database specifying the height of Mount Everest is a datum that communicates a precisely measured value. This measurement may be included in a book along with other data on Mount Everest to describe the mountain in a manner useful for those who wish to decide on the best method to climb it. Awareness of the characteristics represented by this data is knowledge. Data are often assumed to be the least abstract concept, information the next least, and knowledge the most abstract. In this view, data becomes information by interpretation; e.g., the height of Mount Everest is generally considered "data", a book on Mount Everest geological characteristics may be considered "information", and a climber's guidebook containing practical information on the best way to reach Mount Everest's peak may be considered "knowledge". "Information" bears a diversity of meanings that range from everyday usage to technical use. This view, however, has also been argued to reverse how data emerges from information, and information from knowledge. Generally speaking, the concept of information is closely related to notions of constraint, communication, control, data, form, instruction, knowledge, meaning, mental stimulus, pattern, perception, and representation. Beynon-Davies uses the concept of a sign to differentiate between data and information; data is a series of symbols, while information occurs when the symbols are used to refer to something. Before the development of computing devices and machines, people had to manually collect data and impose patterns on it. With the development of computing devices and machines, these devices can also collect data. In the 2010s, computers were widely used in many fields to collect data and sort or process it, in disciplines ranging from marketing, analysis of social service usage by citizens to scientific research. These patterns in the data are seen as information that can be used to enhance knowledge. These patterns may be interpreted as "truth" (though "truth" can be a subjective concept) and may be authorized as aesthetic and ethical criteria in some disciplines or cultures. Events that leave behind perceivable physical or virtual remains can be traced back through data. Marks are no longer considered data once the link between the mark and observation is broken. Mechanical computing devices are classified according to how they represent data. An analog computer represents a datum as a voltage, distance, position, or other physical quantity. A digital computer represents a piece of data as a sequence of symbols drawn from a fixed alphabet. The most common digital computers use a binary alphabet, that is, an alphabet of two characters typically denoted "0" and "1". More familiar representations, such as numbers or letters, are then constructed from the binary alphabet. Some special forms of data are distinguished. A computer program is a collection of data, that can be interpreted as instructions. Most computer languages make a distinction between programs and the other data on which programs operate, but in some languages, notably Lisp and similar languages, programs are essentially indistinguishable from other data. It is also useful to distinguish metadata, that is, a description of other data. A similar yet earlier term for metadata is "ancillary data." The prototypical example of metadata is the library catalog, which is a description of the contents of books. == Data sources == With respect to ownership of data collected in the course of marketing or other corporate collection, data has been characterized according to party depending on how close the data is to the source or if it has been generated through additional processing. "Zero-party data" refers to data that customers "intentionally and proactively shares". This kind of data can come from a variety of sources, including: subscriptions, preference centers, quizzes, surveys, pop-up forms, and interactive digital experiences. "First-party data" may be collected by a company directly from its customers. The secure exchange of first-party data among companies can be done using data clean rooms. "S

  Read more →
• 

  Application delivery network

  An application delivery network (ADN) is a suite of technologies that, when deployed together, provide availability, security, visibility, and acceleration for Internet applications such as websites. ADN components provide supporting functionality that enables website content to be delivered to visitors and other users of that website, in a fast, secure, and reliable way. Gartner defines application delivery networking as the combination of WAN optimization controllers (WOCs) and application delivery controllers (ADCs). At the data center end of an ADN is the ADC, an advanced traffic management device that is often also referred to as a web switch, content switch, or multilayer switch, the purpose of which is to distribute traffic among a number of servers or geographically dislocated sites based on application specific criteria. In the branch office portion of an ADN is the WAN optimization controller, which works to reduce the number of bits that flow over the network using caching and compression, and shapes TCP traffic using prioritization and other optimization techniques. Some WOC components are installed on PCs or mobile clients, and there is typically a portion of the WOC installed in the data center. Application delivery networks are also offered by some CDN vendors. The ADC, one component of an ADN, evolved from layer 4-7 switches in the late 1990s when it became apparent that traditional load balancing techniques were not robust enough to handle the increasingly complex mix of application traffic being delivered over a wider variety of network connectivity options. == Application delivery techniques == The Internet was designed according to the end-to-end principle. This principle keeps the core network relatively simple and moves the intelligence as much as possible to the network end-points: the hosts and clients. An Application Delivery Network (ADN) enhances the delivery of applications across the Internet by employing a number of optimization techniques. Many of these techniques are based on established best-practices employed to efficiently route traffic at the network layer including redundancy and load balancing In theory, an Application Delivery Network (ADN) is closely related to a content delivery network. The difference between the two delivery networks lies in the intelligence of the ADN to understand and optimize applications, usually referred to as application fluency. Application Fluent Network (AFN) is based on the concept of Application Fluency to refer to WAN optimization techniques applied at Layer Four to Layer Seven of the OSI model for networks. Application Fluency implies that the network is fluent or intelligent in understanding and being able to optimize delivery of each application. Application Fluent Network is an addition of SDN capabilities. The acronym 'AFN' is used by Alcatel-Lucent Enterprise to refer to an Application Fluent Network. Application delivery uses one or more layer 4–7 switches, also known as a web switch, content switch, or multilayer switch to intelligently distribute traffic to a pool, also known as a cluster or farm, of servers. The application delivery controller (ADC) is assigned a single virtual IP address (VIP) that represents the pool of servers. Traffic arriving at the ADC is then directed to one of the servers in the pool (cluster, farm) based on a number of factors including application specific data values, application transport protocol, availability of servers, current performance metrics, and client-specific parameters. An ADN provides the advantages of load distribution, increase in capacity of servers, improved scalability, security, and increased reliability through application specific health checks. Increasingly the ADN comprises a redundant pair of ADC on which is integrated a number of different feature sets designed to provide security, availability, reliability, and acceleration functions. In some cases these devices are still separate entities, deployed together as a network of devices through which application traffic is delivered, each providing specific functionality that enhances the delivery of the application. == ADN optimization techniques == === TCP multiplexing === TCP Multiplexing is loosely based on established connection pooling techniques utilized by application server platforms to optimize the execution of database queries from within applications. An ADC establishes a number of connections to the servers in its pool and keeps the connections open. When a request is received by the ADC from the client, the request is evaluated and then directed to a server over an existing connection. This has the effect of reducing the overhead imposed by establishing and tearing down the TCP connection with the server, improving the responsiveness of the application. Some ADN implementations take this technique one step further and also multiplex HTTP and application requests. This has the benefit of executing requests in parallel, which enhances the performance of the application. === TCP optimization === There are a number of Request for Comments (RFCs) which describe mechanisms for improving the performance of TCP. Many ADN implement these RFCs in order to provide enhanced delivery of applications through more efficient use of TCP. The RFCs most commonly implemented are: Delayed Acknowledgements Nagle Algorithm Selective Acknowledgements Explicit Congestion Notification ECN Limited and Fast Retransmits Adaptive Initial Congestion Windows === Data compression and caching === ADNs also provide optimization of application data through caching and compression techniques. There are two types of compression used by ADNs today: industry standard HTTP compression and proprietary data reduction algorithms. It is important to note that the cost in CPU cycles to compress data when traversing a LAN can result in a negative performance impact and therefore best practices are to only utilize compression when delivering applications via a WAN or particularly congested high-speed data link. HTTP compression is asymmetric and transparent to the client. Support for HTTP compression is built into web servers and web browsers. All commercial ADN products currently support HTTP compression. A second compression technique is achieved through data reduction algorithms. Because these algorithms are proprietary and modify the application traffic, they are symmetric and require a device to reassemble the application traffic before the client can receive it. A separate class of devices known as WAN Optimization Controllers (WOC) provide this functionality, but the technology has been slowly added to the ADN portfolio over the past few years as this class of device continues to become more application aware, providing additional features for specific applications such as CIFS and SMB. == ADN reliability and availability techniques == === Advanced health checking === Advanced health checking is the ability of an ADN to determine not only the state of the server on which an application is hosted, but the status of the application it is delivering. Advanced health checking techniques allow the ADC to intelligently determine whether or not the content being returned by the server is correct and should be delivered to the client. This feature enables other reliability features in the ADN, such as resending a request to a different server if the content returned by the original server is found to be erroneous. === Load balancing algorithms === The load balancing algorithms found in today's ADN are far more advanced than the simplistic round-robin and least connections algorithms used in the early 1990s. These algorithms were originally loosely based on operating systems' scheduling algorithms, but have since evolved to factor in conditions peculiar to networking and application environments. It is more accurate to describe today's "load balancing" algorithms as application routing algorithms, as most ADN employ application awareness to determine whether an application is available to respond to a request. This includes the ability of the ADN to determine not only whether the application is available, but whether or not the application can respond to the request within specified parameters, often referred to as a service level agreement. Typical industry standard load balancing algorithms available today include: Round Robin Least Connections Fastest Response Time Weighted Round Robin Weighted Least Connections Custom values assigned to individual servers in a pool based on SNMP or other communication mechanism === Fault tolerance === The ADN provides fault tolerance at the server level, within pools or farms. This is accomplished by designating specific servers as a 'backup' that is activated automatically by the ADN in the event that the primary server(s) in the pool fail. The ADN also ensures application availability and reliability through its ability to seamlessly "failover"

  Read more →
• 

  Spyglass (app)

  Spyglass is a navigation and orientation mobile application developed by Pavel Ahafonau. It combines data from a digital compass, GNSS positioning, motion sensors, maps, and the device camera to provide direction finding, waypoint navigation, and measurement tools. The application is designed for offline and off-road use and is used in outdoor navigation, orientation tasks, astronomy, and fieldwork. == History == Spyglass was created by independent software developer Pavel Ahafonau as a personal project in 2009, following the introduction of a digital compass sensor in the iPhone. It initially focused on combining compass, GPS, and camera data into an augmented-reality tool for navigation and orientation. In September 2009, a public prototype was demonstrated, showing a live camera view combined with a digital compass overlay aligned to device orientation, presenting an early augmented-reality, location-aware heads-up display. The application was released on the Apple App Store in October 2009. In February 2010, a major update introduced target-based navigation, allowing users to navigate to saved locations, bearings, and selected celestial objects. The update also added visual measurement tools, including an optical-style rangefinder, as well as a vertical speed indicator displaying ascent and descent rates derived from device sensor data. In December 2010, Spyglass was featured by Apple in iTunes Rewind 2010 under augmented-reality applications. The application expanded to Android on 28 October 2017. In May 2021, Spyglass expanded its offline mapping capabilities by adding support for additional map styles by Thunderforest, extending the range of available cartographic themes for offline use. Also in 2021, navigation satellite tracking was introduced, allowing visualization and tracking of major GPS/GNSS satellite constellations. In 2022, a searchable offline database of major locations was added, including airports, seaports, mountains, castles, and landmarks, along with nearest-airport tracking functionality. In July 2024, previously separate iOS editions (Spyglass, Commander Compass, and Commander Compass Go) were consolidated into a single Spyglass application. At the same time, the app transitioned to a freemium model. == Features == Spyglass provides navigation and orientation functions by combining sensor data from the device. Core functionality includes a digital compass, GNSS-based positioning, waypoint creation and tracking, and map-based navigation with offline support. The application includes an augmented-reality viewfinder mode that overlays navigation and sensor information onto the live camera view. Displayed data may include heading, bearing, distance to targets, pitch, roll, yaw, altitude, speed, and estimated time of arrival. Additional tools include an altimeter, speedometer, vertical speed indicator, inclinometer, artificial horizon, coordinate conversion utilities, optical rangefinding, and angular measurement tools. Spyglass also supports celestial navigation features, such as tracking of the Sun, Moon, stars, and global navigation satellite systems. Spyglass uses data from the device's GNSS receiver, digital compass, gyroscope, accelerometer, barometer (when available), and camera. Sensor data are combined to calculate position, orientation, movement, and measurement overlays. The application is designed to function without an internet connection. Navigation tools, sensor readings, waypoint tracking, augmented-reality features, celestial tracking, and the built-in location database operate offline. Internet access is required only for loading online map tiles; previously downloaded offline maps remain available without connectivity.

  Read more →
• 

  Unknown key-share attack

  As defined by Blake-Wilson & Menezes (1999), an unknown key-share (UKS) attack on an authenticated key agreement (AK) or authenticated key agreement with key confirmation (AKC) protocol is an attack whereby an entity A {\displaystyle A} ends up believing she shares a key with B {\displaystyle B} , and although this is in fact the case, B {\displaystyle B} mistakenly believes the key is instead shared with an entity E ≠ A {\displaystyle E\neq A} . In other words, in a UKS, an opponent, say Eve, coerces honest parties Alice and Bob into establishing a secret key where at least one of Alice and Bob does not know that the secret key is shared with the other. For example, Eve may coerce Bob into believing he shares the key with Eve, while he actually shares the key with Alice. The “key share” with Alice is thus unknown to Bob.

  Read more →
• 

  Pinoy baiting

  Pinoy baiting is a phrase that has been used to refer to acts by non-Filipino individuals, usually celebrities or YouTubers, of posting content online purportedly with the intention of getting the attention of Filipinos, by being surprised about the Philippines or its people. Pinoy baiters are defined as giving superficial and allegedly insincere praises and similar reactions that give recognition to the Philippines or its people. Subsequent responses by Filipinos to what have been referred to as acts of Pinoy baiting have been criticized as a form of cultural cringe. This criticism would subsequently give the advice that Filipinos should not constantly require validation from non-Filipinos about themselves or their country. == Pinoy baiting mediums == === Reaction videos === On social media such as YouTube, channels with specific focus on showing their reaction towards and opinions about certain videos or topics are called reaction channels. Reaction videos are very popular and require minimal effort to create, and thus made it easy for alleged Pinoy baiting to thrive within this video-making genre. === Travel vlogs === Vlogging, short for video blogging, grew in popularity in the 2020s. Most of the popular alleged Pinoy-baiting channels tend to be vlog channels, normally following the same script under such titles as "The Philippines changed us/me", "First impression of the Philippines", "Is this really Manila?" and "Filipinos are such Kind/Good People!", and made while travelling to touristy areas such as Boracay or Bonifacio Global City and taste-testing the fast food chain Jollibee, among others. == Criticism of the phrase == Philippines-based Korean vlogger Jessica Lee had been accused by some YouTube viewers of engaging in Pinoy baiting. In a response vlog, Lee acknowledged that there may be individuals engaging in this "business strategy" of gaining views and subscribers from one of the largest communities online. However, she questioned the objectivity of some use of the phrase, citing any vlogging subject as fair game for a negative impression of being a "baiting" tool for the vlogger treating of that subject. She also invoked vloggers' freedom to choose whatever subject they want to talk about in a deep or shallow manner, while enjoining citizens to exercise their free-market right to unfollow vloggers they hate and follow those vloggers that "make them happy". She also gave her critics an explanation why she ended up vlogging about Philippine and Filipino subjects.

  Read more →