AI Grammar Remover

AI Grammar Remover — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Texture compression

Texture compression is a specialized form of image compression designed for storing texture maps in 3D computer graphics rendering systems. Unlike conventional image compression algorithms, texture compression algorithms are optimized for random access. Texture compression can be applied to reduce memory usage at runtime. Texture data is often the largest source of memory usage in a mobile application. == Tradeoffs == In their seminal paper on texture compression, Beers, Agrawala and Chaddha list four features that tend to differentiate texture compression from other image compression techniques. These features are: Decoding Speed It is highly desirable to be able to render directly from the compressed texture data and so, in order not to impact rendering performance, decompression must be fast. Random Access Since predicting the order that a renderer accesses texels would be difficult, any texture compression scheme must allow fast random access to decompressed texture data. This tends to rule out many better-known image compression schemes such as JPEG or run-length encoding. Compression Rate and Visual Quality In a rendering system, lossy compression can be more tolerable than for other use cases. Some texture compression libraries, such as crunch, allow the developer to flexibly trade off compression rate vs. visual quality, using methods such as rate–distortion optimization (RDO). Encoding Speed Texture compression is more tolerant of asymmetric encoding/decoding rates as the encoding process is often done only once during the application authoring process. Given the above, most texture compression algorithms involve some form of fixed-rate lossy vector quantization of small fixed-size blocks of pixels into small fixed-size blocks of coding bits, sometimes with additional extra pre-processing and post-processing steps. Block Truncation Coding is a very simple example of this family of algorithms. Because their data access patterns are well-defined, texture decompression may be executed on-the-fly during rendering as part of the overall graphics pipeline, reducing overall bandwidth and storage needs throughout the graphics system. As well as texture maps, texture compression may also be used to encode other kinds of rendering map, including bump maps and surface normal maps. Texture compression may also be used together with other forms of map processing such as mipmaps and anisotropic filtering. == Availability == Some examples of practical texture compression systems are S3 Texture Compression (S3TC), PVRTC, Ericsson Texture Compression (ETC) and Adaptive Scalable Texture Compression (ASTC); these may be supported by special function units in modern graphics processing units (GPUs). OpenGL and OpenGL ES, as implemented on many video accelerator cards and mobile GPUs, can support multiple common kinds of texture compression - generally through the use of vendor extensions. == Supercompression == A compressed-texture can be further compressed in what is called "supercompression". Fixed-rate texture compression formats are optimized for random access and are much less efficient compared to image formats such as PNG. By adding further compression, a programmer can reduce the efficiency gap. The extra layer can be decompressed by the CPU so that the GPU receives a normal compressed texture, or in newer methods, decompressed by the GPU itself. Supercompression saves the same amount of VRAM as regular texture compression, but saves more disk space and download size. == Neural Texture Compression == Random-Access Neural Compression of Material Textures (Neural Texture Compression) is a Nvidia's technology which enables two additional levels of detail (16× more texels, so four times higher resolution) while maintaining similar storage requirements as traditional texture compression methods. The key idea is compressing multiple material textures and their mipmap chains together, and using a small neural network, that is optimized for each material, to decompress them.
Read more →
Pandemonium architecture

Pandemonium architecture is a theory in cognitive science that describes how visual images are processed by the brain. It has applications in artificial intelligence and pattern recognition. The theory was introduced by the artificial intelligence pioneer Oliver Selfridge in his 1959 paper "Pandemonium - A Paradigm for Learning". It describes the process of object recognition as the exchange of signals within a hierarchical system of detection and association, the elements of which Selfridge metaphorically termed "demons". This model is now recognized as the basis of visual perception in cognitive science. Pandemonium architecture arose in response to the inability of template matching theories to offer a biologically plausible explanation of the image constancy phenomenon. Contemporary researchers praise this architecture for its elegancy and creativity; that the idea of having multiple independent systems (e.g., feature detectors) working in parallel to address the image constancy phenomena of pattern recognition is powerful yet simple. The basic idea of the pandemonium architecture is that a pattern is first perceived in its parts before the "whole". Pandemonium architecture was one of the first computational models in pattern recognition. Although not perfect, the pandemonium architecture influenced the development of modern connectionist, artificial intelligence, and word recognition models. == History == Most research in perception has been focused on the visual system, investigating the mechanisms of how we see and understand objects. A critical function of our visual system is its ability to recognize patterns, but the mechanism by which this is achieved is unclear. The earliest theory that attempted to explain how we recognize patterns is the template matching model. According to this model, we compare all external stimuli against an internal mental representation. If there is "sufficient" overlap between the perceived stimulus and the internal representation, we will "recognize" the stimulus. Although some machines follow a template matching model (e.g., bank machines verifying signatures and accounting numbers), the theory is critically flawed in explaining the phenomena of image constancy: we can easily recognize a stimulus regardless of the changes in its form of presentation (e.g., T and T are both easily recognized as the letter T). It is highly unlikely that we have a stored template for all of the variations of every single pattern. As a result of the biological plausibility criticism of the template matching model, feature detection models began to rise. In a feature detection model, the image is first perceived in its basic individual elements before it is recognized as a whole object. For example, when we are presented with the letter A, we would first see a short horizontal line and two slanted long diagonal lines. Then we would combine the features to complete the perception of A. Each unique pattern consists of different combination of features, which means those that are formed with the same features will generate the same recognition. That is, regardless of how we rotate the letter A, is still perceived as the letter A. It is easy for this sort of architecture to account for the image constancy phenomena because you only need to "match" at the basic featural level, which is presumed to be limited and finite, thus biologically plausible. The best known feature detection model is called the pandemonium architecture. == Pandemonium architecture == The pandemonium architecture was originally developed by Oliver Selfridge in the late 1950s. The architecture is composed of different groups of "demons" working independently to process the visual stimulus. Each group of demons is assigned to a specific stage in recognition, and within each group, the demons work in parallel. There are four major groups of demons in the original architecture. The concept of feature demons, that there are specific neurons dedicated to perform specialized processing is supported by research in neuroscience. Hubel and Wiesel found there were specific cells in a cat's brain that responded to specific lengths and orientations of a line. Similar findings were discovered in frogs, octopuses and a variety of other animals. Octopuses were discovered to be only sensitive to verticality of lines, whereas frogs demonstrated a wider range of sensitivity. These animal experiments demonstrate that feature detectors seem to be a very primitive development. That is, it did not result from the higher cognitive development of humans. Not surprisingly, there is also evidence that the human brain possesses these elementary feature detectors as well. Moreover, this architecture is capable of learning, similar to a back-propagation styled neural network. The weight between the cognitive and feature demons can be adjusted in proportion to the difference between the correct pattern and the activation from the cognitive demons. To continue with our previous example, when we first learned the letter R, we know is composed of a curved, long straight, and a short angled line. Thus when we perceive those features, we perceive R. However, the letter P consists of very similar features, so during the beginning stages of learning, it is likely for this architecture to mistakenly identify R as P. But through constant exposure of confirming R's features to be identified as R, the weights of R's features to P are adjusted so the P response becomes inhibited (e.g., learning to inhibit the P response when a short angled line is detected). In principle, a pandemonium architecture can recognize any pattern. As mentioned earlier, this architecture makes error predictions based on the amount of overlapping features. Such as, the most likely error for R should be P. Thus, in order to show this architecture represents the human pattern recognition system we must put these predictions into test. Researchers have constructed scenarios where various letters are presented in situations that make them difficult to identify; then types of errors were observed, which was used to generate confusion matrices: where all of the errors for each letter are recorded. Generally, the results from these experiments matched the error predictions from the pandemonium architecture. Also as a result of these experiments, some researchers have proposed models that attempted to list all of the basic features in the Roman alphabet. == Criticism == A major criticism of the pandemonium architecture is that it adopts a completely bottom-up processing: recognition is entirely driven by the physical characteristics of the targeted stimulus. This means that it is unable to account for any top-down processing effects, such as context effects (e.g., pareidolia), where contextual cues can facilitate (e.g., word superiority effect: it is relatively easier to identify a letter when it is part of a word than in isolation) processing. However, this is not a fatal criticism to the overall architecture, because is relatively easy to add a group of contextual demons to work along with the cognitive demons to account for these context effects. Although the pandemonium architecture is built on the fact that it can account for the image constancy phenomena, some researchers have argued otherwise; and pointed out that the pandemonium architecture might share the same flaws from the template matching models. For example, the letter H is composed of 2 long vertical lines and a short horizontal line; but if we rotate the H 90 degrees in either direction, it is now composed of 2 long horizontal lines and a short vertical line. In order to recognize the rotated H as H, we would need a rotated H cognitive demon. Thus we might end up with a system that requires a large number of cognitive demons in order to produce accurate recognition, which would lead to the same biological plausibility criticism of the template matching models. However, it is rather difficult to judge the validity of this criticism because the pandemonium architecture does not specify how and what features are extracted from incoming sensory information, it simply outlines the possible stages of pattern recognition. But of course that raises its own questions, to which it is almost impossible to criticize such a model if it does not include specific parameters. Also, the theory appears to be rather incomplete without defining how and what features are extracted, which proves to be especially problematic with complex patterns (e.g., extracting the weight and features of a dog). Some researchers have also pointed out that the evidence supporting the pandemonium architecture has been very narrow in its methodology. Majority of the research that supports this architecture has often referred to its ability to recognize simple schematic drawings that are selected from a small finite set (e.g., letters in the Roman alphabet). Evidence from these types of exper
Read more →
Automatic scorer

An automatic scorer is the computerized scoring system to keep track of scoring in ten-pin bowling. It was introduced en masse in bowling alleys in the 1970s and combined with mechanical pinsetters to detect overturned pins. By eliminating the need for manual score-keeping, these systems have introduced new bowlers into the game who otherwise would not participate because they had to count the score themselves, as many do not understand the mathematical formula involved in bowler scoring. At first, people were skeptical about whether a computer could keep an accurate score. In the twenty-first century, automatic scorers are used in most bowling centers around the world. The three manufacturers of these specialty computers have been Brunswick Bowling, AMF Bowling (later QubicaAMF), and RCA. == History == Automatic equipment is considered a cornerstone of the modern bowling center. The traditional bowling center of the early 20th century was advanced in automation when the pinsetter person ("pin boy"), who set back up by hand the bowled down pins, was replaced by a machine that automatically replaced the pins in their proper play positions. This machine came out in the 1950s. A detection system was developed from the pinsetter mechanism in the 1960s that could tell which pins had been knocked down, and that information could be transferred to a digital computer. Automatic electronic scoring was first conceived by Robert Reynolds, who was described by a newspaper story at the time as "a West Coast electronics calculator expert." He worked with the technical staff of Brunswick Bowling to develop it. The goal was realized in the late 1960s when a specialized computer was designed for the purpose of automatic scorekeeping for bowling. The field test for the automatic scorer took place at Village Lanes bowling center, Chicago in 1967. The scoring machine received approval for official use by the American Bowling Congress in August of that year. They were first used in national official league gaming on October 10, 1967. In November, Brunswick announced that they were accepting orders for the new digital computer, which cost around $3,000 per bowling lane. Bowling centers that installed these new automatic scoring devices in the 1970s charged a ten cents extra per line of scoring for the convenience. == Description == Each Automatic Scorer computer unit kept score for four lanes. It had two bowler identification panels serving two lanes each. The bowler pushed it into his named position when his turn came up so the computer knew who was bowling and score accordingly. After the bowler rolled the bowling ball down the lane and knocked down pins, the pinsetter detected which pins were down and relayed this information back to the computer for scoring. The result was then printed on a scoresheet and projected overhead onto a large screen for all to see. The Automatic Scorer digital computer was mathematically accurate, however the detection system at the pinsetter mechanism sometimes reported the wrong number of pins knocked down. The computer could be corrected manually for any errors in the system; similarly, human errors, such as neglecting to move the bowler identification mechanism, could be corrected for by manual action. The scorer could take into account bowlers' handicaps and could adjust for late-arriving bowlers. The automatic scorer is directly connected to the foul detection unit. As a result, foul line violations are automatically scored. Brunswick had put ten years of research and development into the Automatic Scorer, and by 1972 there were over 500 of these computers installed in bowling centers around the world. AMF Bowling, competitor to Brunswick, entered into the automatic scorer computer field during the 1970s and their systems were installed into their brand of bowling centers. By 1974, RCA was also making these computers for automatic scoring. == Reception and further developments == The purposes of the computerized scoring were to avoid errors by human scorers and to prevent cheating. It had the side benefit of speeding up the progress of the game and introducing new bowlers to the game. Score-keeping for bowling is based on a formula that many new to bowling were not familiar with and thought difficult to learn. These casual bowlers unfamiliar with the formula thought the scores given by the computers were confusing. Some bowlers were not comfortable with automatic scorers when they were introduced in the 1970s, so kept score using the traditional method on paper score sheets. The introduction of this device increased the popularity of the sport. Automatic scorers came to be considered a normal part of modern bowling installations worldwide, with owners and managers saying that bowlers expect such equipment to be present in bowling establishments and that business increased following their introduction. Brunswick introduced a color television style automatic scorer in 1983. Bowling center owners could use these style automatic scorers for advertising, management, videos, and live television. By the 2010s, these types of electronic visual displays could show bowler avatars and social media connections to publicize the bowlers' scores. Some are capable of being extended entertainment systems of games for children and adults. Some scoring systems support variations on traditional bowling, such as different kinds of bingo games where certain pins have to be knocked down at certain times or practice regimes where certain spares have to be accomplished. By this point, QubicaAMF Worldwide, an outgrowth of AMF, was one of the leading providers of bowling scoring equipment.
Read more →
Dating app

An online dating application, commonly known as a dating app, is an online dating service presented through a mobile phone application. These apps often take advantage of a smartphone's GPS location capabilities, always on-hand presence, and access to mobile wallets. These apps aim to speed up the online dating process of sifting through potential dating partners, chatting, flirting, and potentially meeting or becoming romantically involved. Online dating apps are now mainstream in the United States. As of 2017, online dating (which included both apps and other online dating services) was the principal method by which new couples in the U.S. met. The percentage of couples meeting online is predicted to increase to 70% by 2040. == Origins == The first computerized dating service was launched in 1964, the St. James Computer Dating Service, which became known as Com-Pat. The first U.S. dating service that used computerized match making was Operation Match. It required men and women to complete a questionnaire and was launched in 1965. Operation Match inspired the methodology of Dateline, which became popular in the 1970s and 1980s. Match.com was launched in 1995 and turned computerized match making into a profitable business. Grindr targeted gay and bisexual men at launch. Tinder, launched in 2012, led to a growth of online dating applications by both new providers and existing online dating services that expanded into the mobile app market. == Usage by demographic group == Online dating applications typically target a younger demographic group, though some apps, like Senior Match and Silver Singles are geared toward the 50 and up demographic. In 2016, almost 50% of people knew of someone who use the services or had met their loved one through the service. After the iPhone launch in 2007, online dating data has mushroomed as application usage increased. In 2005, only 10% of 18-24 year olds reported to have used online dating services; this number quickly grew to over 27%, making this target demographic the largest number of users for most applications. When Pew Research Center conducted a study in 2016, they found that 59% of U.S. adults agreed that online dating is a good way to meet people compared to 44% in 2005. This explosion in usage can be explained by the increased use of smartphones. By the end of 2022, it is expected there will be 413 million active users of online dating services worldwide. A 2023 Pew Research Center survey of 6,034 American adults found that 30% had ever used an online dating site or app, including 53% of those aged 18 to 29, 37% of those aged 30 to 49, and 17% of those aged 50 and over. Lesbian, gay and bisexual respondents reported using dating apps at nearly twice the rate of straight respondents (51% versus 28%), and 36% of divorced, separated or widowed adults had used one, compared with 16% of married adults. The increased use of smartphones by those 65 and older has also driven that population to the use dating apps. The Pew Research Center found that usage increase by 8 points since last surveyed in 2012. A study in 2021 found that more than one-third of seniors have dated in the past 5 years, and roughly one-third of those dating seniors have turned to dating apps. During the COVID-19 pandemic, Morning Consult found that more Americans were using online dating apps than ever before. In one survey in April 2020, the company discovered that 53% of U.S. adults who use online dating apps have been using them more during the pandemic. As of February 2021, that share increased to 71 percent. Research using Hofstede's cultural dimensions theory has indicated that norms about online dating applications tend to differ across cultures. A study published in the Journal of Creative Communications looked into the relationships between dating-app advertisements from over 51 countries and the cultural dimensions of these countries. The results revealed that dating-app advertisements appealed to multiple cultural needs, including the needs for relationships, friendship, entertainment, sex, status, design and identity. The use of these appeals was found to be 'congruent with ... the individualism/collectivism and uncertainty avoidance cultural dimensions.' == Popular applications == Following Tinder's success, other companies released dating applications. Raya was released in 2015 as a membership-based dating app, allowing entrance only through referrals, which was marketed as a dating app for celebrities. In early 2026, Hily surpassed Bumble to become the third most-used dating application in the United States and the fifth highest-grossing overall, driven largely by growing popularity among Generation Z users, while remaining behind Tinder and Hinge, both owned by Match Group. A number of dating apps have been created targeting adherents of particular religions seeking partners of the same religion, such as Muzmatch for Muslims, Christian Mingle, SALT, and Christian Connection for Christians, and JSwipe and JDate for Jews. === VR Dating === VR Dating is an application of Social VR where people can exist, collaborate, and perform various activities together. Virtual reality apps use virtual and augmented realities to make the dating experience more lifelike and more effective, as well as allow people to expand what is already possible in the world of online dating. There are several online platforms of VR Dating. The VR dating app Nevermet is the VR equivalent of Tinder, where people can search and find on dates. However, instead of actual real-life pictures, users will update pictures of virtual selves and will be interacting with avatars rather than real faces. Flirtual is a self-contained social VR app that serves to match users who then decide where and how to meet in VR. Flirtual hosts speed dating and social events in VR. == Effects on dating == The usage of online dating applications can have both advantages and disadvantages: === Advantages === Many of the applications provide personality tests for matching or use algorithms to match users. These factors enhance the possibility of users getting matched with a compatible candidate. Users are in control; they are provided with many options so there are enough matches that fit their particular type. Users can simply choose to not match the candidates that they know they are not interested in. Narrowing down options is easy. Once users think they are interested, they are able to chat and get to know the potential candidate. This form of communication can reduce the time, cost, and uncertainty often associated with traditional dating methods. Online dating offers convenience; people want dating to work around their schedules. Online dating can also increase self-confidence; even if users get rejected, they know there are hundreds of other candidates that will want to match with them so they can simply move on to the next option. In fact, 60% of U.S. adults agree that online dating is a good way to meet people and 66% say they have gone on a real date with someone they met through an application. Today, 5% of married Americans or Americans in serious relationships said they met their significant other online. The 39% of online dating users (representing 12% of all U.S. adults) say they have been in a committed relationship or married someone they met on a dating site or app. ==== Rejection sensitive individuals ==== Individuals high in rejection sensitivity are more likely to use online dating applications. As they tend to expect, perceive and overreact to rejection, rejection sensitive individuals struggle with traditional dating. Online dating applications allow for them to better reveal their true selves, potentially increasing their dating success. Online dating applications also obscure rejection cues, alleviating the rejection-related distress experienced by rejection sensitive individuals. ==== Anxiously attached individuals ==== Individuals high in attachment anxiety are also more likely to use online dating applications. While they harbour negative self-views, anxiously attached individuals are also more eager to enter and commit to relationships. Online dating applications allow for them to present "an authentic yet ideal version of themselves", mitigating their tendencies to view themselves as undesirable. This increases their romantic confidence, and potentially alleviates their anxiety when searching for a romantic partner. === Disadvantages === Sometimes having too many options can be overwhelming. With so many options available, users can get lost in their choices and end up spending too much time looking for the "perfect" candidate instead of using that time to start a real relationship. In addition, the algorithms and matching systems put in place may not always be as accurate as users think. There is no perfect system that can match two people's personalities perfectly every time. Communication online also lacks the physical chemistry aspec
Read more →
Linux color management

Linux color management has the same goal as the color management systems (CMS) for other operating systems, which is to achieve the best possible color reproduction throughout an imaging workflow from its source (camera, video, scanner, etc.), through imaging software (Digikam, darktable, RawTherapee, GIMP, Krita, Scribus, etc.), and finally onto an output medium (monitor, video projector, printer, etc.). In particular, color management attempts to enable color consistency across media and throughout a color-managed workflow. Linux color management relies on the use of accurate ICC (International Color Consortium) and DCP (DNG Color Profile) profiles describing the behavior of input and output devices, and color-managed applications that are aware of these profiles. These applications perform gamut conversions between device profiles and color spaces. Gamut conversions, based on accurate device profiles, are the essence of color management. Historically, color management was not an initial design consideration of the X Window System on which much of Linux graphics support rests, and thus color-managed workflows have been somewhat more challenging to implement on Linux than on other OS's such as Microsoft Windows or macOS. This situation is now being progressively remedied, and color management under Linux, while functional, has not yet acquired mature status. Although it is now possible to obtain a consistent color-managed workflow under Linux, certain problems still remain: The absence of a central user control panel for color settings. Some hardware devices for color calibration lack Linux drivers, firmware or accessory data. Since ICC color profiles are written to an open specification, they are compatible across operating systems. Hence, a profile produced on one OS should work on any other OS given the availability of the necessary software to read it and perform the gamut conversions. This can be used as a workaround for the lack of support for certain spectrophotometers or colorimeters under Linux: one can simply produce a profile on a different OS and then use it in a Linux workflow. Additionally, certain hardware, such as most printers and certain monitors, can be calibrated under another OS and then used in a fully color-managed workflow on Linux. The popular Ubuntu Linux distribution added initial color management in the 11.10 release (the "Oneiric Ocelot" release). == Requirements for a color-managed workflow == Accurate device profiles obtained with source or output characterization software. Correctly loaded video card lookup tables (LUTs) (or monitor profiles that do not require LUT adjustments). Color-managed applications that are configured to use a correct monitor profile and input/output profiles, with support for control over the rendering intent and black point compensation. Calibration and profiling requires: for input devices (scanner, camera, etc.) a color target which the profiling software will compare to the manufacturer-provided color values of the target. or for output devices (monitor, printer, etc.) a reading with a specific device (spectrophotometer, colorimeter or spectrocolorimeter) of the color patch values and comparing the measured values against the values originally sent for output. === Monitor calibration and profiling === One of the critical elements in any color-managed workflow is the monitor, because, at one step or another, handling and making color adaptation through imaging software is required for most images, thus the ability of the monitor to present accurate colors is crucial. Monitor color management consists of calibration and profiling. The first step, calibration, is done by adjusting the monitor controls and the output of the graphics card (via calibration curves) to match user-definable characteristics, such as brightness, white point and gamma. The calibration settings are stored in a .cal file. The second step, profiling (characterization), involves measuring the calibrated display's response and recording it in a color profile. The profile is stored in an .icc file ("ICC file"). For convenience, the calibration settings are usually stored together with the profile in the ICC file. Note that .icm files are identical to .icc files - the difference is only in the name. Seeing correct colors requires using a monitor profile-aware application, together with the same calibration used when profiling the monitor. Calibration alone does not yield accurate colors. If a monitor was calibrated before it was profiled, the profile will only yield correct colors when used on the monitor with the same calibration (the same monitor control adjustments and the same calibration curves loaded into the video card's lookup table). macOS has built-in support for loading calibration curves and installing a system-wide color profile. Windows 7 onward allows loading calibration curves, though this functionality must be enabled manually. Linux and older versions of Windows require using a standalone LUT loader. === Device profiles === ICC profiles are cross-platform and can thus be created on other operating systems and used under Linux. Monitor profiles, however, require some additional attention. Since a monitor profile depends both on the monitor itself and on the video card, a monitor profile should only be used with the same monitor and video card with which it was created. The monitor settings should not be adjusted after creating the profile. In addition, since most calibration software use LUT adjustments during calibration, the corresponding LUTs must be loaded every time the display server (X11, Wayland) is started (e.g. with every graphical login). In the unlikely case of a colorimeter being unsupported by Linux, a profile created under Windows or macOS can be used under Linux. === Display-channel lookup tables === There are two approaches to loading display channel LUTs: Create a profile that does not modify video card LUTs and thus does not require LUTs be loaded later on. Ideally, this approach would rely on DDC-capable monitors—the internal monitor settings of which are set via calibration software. Unfortunately, monitors capable of making these adjustments through DDC are not common and are generally expensive. There is only one calibration software on Linux that can interact with a DDC monitor. For mainstream monitors, a couple of options exist: BasICColor software, which works with most colorimeters on the market, allows one to adjust display output via the monitor interface, and then to choose a "Profile, do not calibrate" option. By doing this, one can create a profile that does not require video card LUT adjustments. For EyeOne devices, EyeOne Match allows the user to calibrate to "Native" gamma and white point targets, which results in the LUT adjustment curves displayed after the calibration as a simple, linear 1:1 mapping (a straight line from corner to corner). Both BasICColor and EyeOne Match do not presently run under Linux but they are capable of creating a profile that does not require LUT adjustments. Use an LUT loader to actually load the LUT adjustments contained within the profile prepared during calibration. According to the documentation, these loaders do not modify the video card LUT by itself, but achieve the same type of adjustment by modifying the X server gamma ramp. Loaders are available for Linux distributions that use X.org or XFree86—the two most popular X servers on Linux. Other X servers are not guaranteed to work with the currently available loaders. There are two LUT loaders available for Linux: Xcalib is one such loader, and although it is a command-line utility, it is quite easy to use. dispwin is a part of Argyll CMS. If, for any reason, the LUT cannot be loaded, it is still recommended to go through the initial stages of calibration where a user is asked by calibration software to make some manual adjustments to the monitor, as this will often improve display linearity and also provide information on its color temperature. This is especially recommended for CRT monitors. === Color-managed applications === In ICC-aware applications, it is important to make sure the correct profiles are assigned to devices, mainly to the monitor and the printer. Some Linux applications can auto-detect the monitor profile, while others requires that it is specified manually. Although there is no designated place to store device profiles on Linux, /usr/share/color/icc/ has become the de facto standard. Most applications running under WINE have not been fully tested for color accuracy. While 8-bpp programs can have some color resolution difficulties due to depth conversion errors, colors in higher-depth applications should be accurate, as long as those programs perform their gamut conversions based on the same monitor profile as that used for loading the LUT, granted that the corresponding LUT adjustments are loaded. == List of color-managed applications == darktabl
Read more →
Avid Symphony

Avid Symphony is non-linear editing software aimed at professionals in the film and television industry. It is available for Microsoft Windows PCs and Apple Macintosh platforms. Symphony is Avid's high end SD/HD finishing platform for long form work, such as documentary and episodic TV. Its interface is based on the same look and feature set as the Media Composer and Xpress systems, but contains the highest level of features and resolution including secondary color correction, uncompressed HD, and higher real-time performance. == Release history == Symphony is the software component of a tightly integrated package that includes specific hardware audio/video interfaces, storage, and the computer, also sold by Avid. Its release history is therefore tightly related to the release of new Avid interface hardware: Symphony was introduced to the market in 1998. It was based on Avid's Meridien hardware, supporting SD only, and was available first only for the PC and later for the Macintosh platforms. Its last release was 5.0.5 which supported Windows 2000 and Mac OS X v10.2. The next major upgrade was Symphony Nitris in 2005, with a redesigned software and integration with the Nitris DNA hardware (PCI-X). It supported 8 bit and 10 bit SD and HD resolutions in both compressed and uncompressed forms, the MXF format and DNxHD codec, and ran only on Windows PC platforms. Symphony Nitris DX, released in 2008, added support for a range of HD codecs, including HDV, XDCAM-HD, DVCPRO HD, and AVC-I, and brought back Mac OS support for OS X 10.5, as well as Windows Vista. Since the introduction of Symphony 6, it can be used in software-only mode (where a Nitris or Nitris DX BOB used to be required), and at the same time, like Media Composer, Symphony was opened up with "Open I/O", allowing users to have Symphony use their third party hardware from companies like AJA, Matrox, BlueFish, Blackmagic Design and MOTU. The last remaining features that differentiate it from Media Composer are Advanced Color Correction (channels, secondary color correction,), Relational Color Correction (corrections based on common clip name, tape name, program track) and Universal HD Mastering (only with Nitris DX hardware). The latter allows cross-conversions of 23.976p or 24p projects sequences to most any other format during Digital Cut. In 2013, Avid announced it would no longer offer Symphony a standalone product. Starting version 7, Symphony will be sold as an option to Media Composer. This optional package (sold at a premium) will contain all the traditional Symphony-only features to any Media Composer install. == Use in movies == The Celibacy, Director: Horacio Bocaranda Avid Media Composer 6 and Avid Symphony 6 Nitris DX American Hardcore, Director: Paul Rachman Avid Xpress Pro and Symphony Summercamp!, Director: Spike Lee Avid Xpress Pro and Symphony When the Levees Broke Avid Media Composer and Symphony Nitris Superman Returns Edited with Mac-based Film Composer XL, but HD screenings prepped with Symphony
Read more →
GamePigeon

GamePigeon is a mobile app for iOS devices, developed by Vitalii Zlotskii and released on September 13, 2016. The game takes advantage of the iOS 10 update, which expanded how users could interact with Apple's Messages app. GamePigeon is only available through the Messages app, which allows players to start and respond to different party games in conversations. == Release == The app was first released on September 13, 2016, coinciding with the launch of iOS 10. The app was released for free, although it includes in-app purchases to unlock additional items, such as cosmetic skins, avatar items, new game modes, and an option to remove ads. == Games in the app == The following is a list of games that users can play within GamePigeon: Sources: Poker was one of the games included in GamePigeon at launch, although it has since been removed and is no longer listed on the game's App Store description. == Reception == GamePigeon has enjoyed commercial success, with VentureBeat noting that GamePigeon was ranked number-one in the "Top Free" category of the iMessage App Store, six months after its release. Critically, GamePigeon has been generally well received, being highlighted by online media publications early on shortly after the iOS 10 launch. It has since been included on many "best iMessage apps" lists. Based on over 162,000 ratings, the game holds a 4.0 out of 5 rating on the App Store. Julian Chokkattu of Digital Trends wrote "GamePigeon should be like the pre-installed versions of Solitaire and Minesweeper that used to come with older iterations of Windows." On its launch day, Boy Genius Report included it on a list of "10 of the best iMessage apps, games and stickers for iOS 10 on launch day." The Daily Dot wrote, "GamePigeon is easily the best current gaming option within iMessages." 8-ball and cup pong have been particularly well received by media outlets. The Daily Dot had specific praise for the app's billiards game: "8-Ball controls shockingly smoothly with your fingers, and there’s nothing quite like destroying a dear friend in poker." During his 2020 U.S. presidential campaign, Cory Booker was cited as playing the game with his family. In 2017, CNBC cited one teenager who expressed that GamePigeon was one of just a few reasons that those in her age range use the iMessage app. The game has received particular positive reception for allowing introverted individuals to exercise a form social activity; similarly, the game was highlighted as a way to maintain social distancing guidelines during the COVID-19 pandemic. As an April Fools' Day joke in 2020, The Chronicle, a Duke University newspaper, published that Duke's athletic program adopted GamePigeon's Cup Pong as an official varsity sport.
Read more →
Creately

Creately is a SaaS visual collaboration tool with diagramming and design capabilities designed by Cinergix. The application is mostly known for creating flowcharts, organization charts, project charts, UML diagrams, mind maps, and other business visuals. == History == The initial beta version of Creately was released by Chandika Jayasundara. Hiraash Thawfeek, Nick Foster and Charanjit Singh joined the project in the same year. Chandika Jayasundara is CEO of Cinergix. The headquarters of the company is located at Mentone, Victoria, Australia. == Features and reception == Creately provides predefined templates and diagram elements for incorporating in the projects. It provides drag and drop feature with which both predefined and custom made shapes can be included to build the desired diagram while the same workspace can be shared with multiple persons for collaboration. Some experts have reviewed the application by commenting on its lacking in accessible integration options as its downside. The company claims Creately to have integration feature with Slack, Confluence while not having the integration with Zapier and OneDrive yet. It is compatible with Google Drive and Dropbox. The software is available as both freemium and paid option.
Read more →
Cloud load balancing

Cloud load balancing is a type of load balancing that is performed in cloud computing. Cloud load balancing is the process of distributing workloads across multiple computing resources. Cloud load balancing reduces costs associated with document management systems and maximizes availability of resources. It is a type of load balancing and not to be confused with Domain Name System (DNS) load balancing. While DNS load balancing uses software or hardware to perform the function, cloud load balancing uses services offered by various computer network companies. == Comparison With DNS load balancing == Cloud load balancing has an advantage over DNS load balancing as it can transfer loads to servers globally as opposed to distributing it across local servers. In the event of a local server outage, cloud load balancing delivers users to the closest regional server without interruption for the user. Cloud load balancing addresses issues relating to TTL reliance present during DNS load balancing. DNS directives can only be enforced once in every TTL cycle and can take several hours if switching between servers during a lag or server failure. Incoming server traffic will continue to route to the original server until the TTL expires and can create an uneven performance as different internet service providers may reach the new server before other internet service providers. Another advantage is that cloud load balancing improves response time by routing remote sessions to the best performing data centers. == Importance of Load Balancing == Cloud computing brings advantages in "cost, flexibility and availability of service users." Those advantages drive the demand for Cloud services. The demand raises technical issues in Service Oriented Architectures and Internet of Services (IoS)-style applications, such as high availability and scalability. As a major concern in these issues, load balancing allows cloud computing to "scale up to increasing demands" by efficiently allocating dynamic local workload evenly across all nodes. == Load Balancing Techniques == === Scheduling Algorithms === Opportunistic Load Balancing (OLB) is the algorithm that assigns workloads to nodes in free order. It is simple but does not consider the expected execution time of each node. Load balance Min-Min (LBMM) assigns sub-tasks to the node which requires minimum execution time. === Load Balancing Policies === Workload and Client Aware Policy (WCAP) specifies the unique and special property (USP) of requests and computing nodes. With the information of USP, the schedule can decide the most suitable node to complete a request. WCAP makes the most of computing nodes by reducing their idle time. Also, it reduces performance time through searches based on content information. === A Comparative Study of Algorithms === Biased Random Sampling bases its job allocation on the network represented by a directed graph. For each execution node in this graph, in-degree means available resources and out-degree means allocated jobs. In-degree will decrease during job execution while out-degree will increase after job allocation. Active Clustering is a self-aggregation algorithm to rewire the network. The experiment result is that"Active Clustering and Random Sampling Walk predictably perform better as the number of processing nodes is increased" while the Honeyhive algorithm does not show the increasing pattern. == Client-side Load Balancer Using Cloud Computing == Load balancer forwards packets to web servers according to different workloads on servers. However, it is hard to implement a scalable load balancer because of both the "cloud's commodity business model and the limited infrastructure control allowed by cloud providers." Client-side Load Balancer (CLB) solve this problem by using a scalable cloud storage service. CLB allows clients to choose back-end web servers for dynamic content although it delivers static content.
Read more →
Voice activity detection

Voice activity detection (VAD), also known as speech activity detection or speech detection, is the detection of the presence or absence of human speech, used in speech processing. The main uses of VAD are in speaker diarization, speech coding and speech recognition. It can facilitate speech processing, and can also be used to deactivate some processes during non-speech section of an audio session: it can avoid unnecessary coding/transmission of silence packets in Voice over Internet Protocol (VoIP) applications, saving on computation and on network bandwidth. VAD is an important enabling technology for a variety of speech-based applications. Therefore, various VAD algorithms have been developed that provide varying features and compromises between latency, sensitivity, accuracy and computational cost. Some VAD algorithms also provide further analysis, for example whether the speech is voiced, unvoiced or sustained. Voice activity detection is usually independent of language. It was first investigated for use on time-assignment speech interpolation (TASI) systems. == Algorithm overview == The typical design of a VAD algorithm is as follows: There may first be a noise reduction stage, e.g. via spectral subtraction. Then some features or quantities are calculated from a section of the input signal. A classification rule is applied to classify the section as speech or non-speech – often this classification rule finds when a value exceeds a certain threshold. There may be some feedback in this sequence, in which the VAD decision is used to improve the noise estimate in the noise reduction stage, or to adaptively vary the threshold(s). These feedback operations improve the VAD performance in non-stationary noise (i.e. when the noise varies a lot). A representative set of recently published VAD methods formulates the decision rule on a frame by frame basis using instantaneous measures of the divergence distance between speech and noise. The different measures which are used in VAD methods include spectral slope, correlation coefficients, log likelihood ratio, cepstral, weighted cepstral, and modified distance measures. Independently from the choice of VAD algorithm, a compromise must be made between having voice detected as noise, or noise detected as voice (between false positive and false negative). A VAD operating in a mobile phone must be able to detect speech in the presence of a range of very diverse types of acoustic background noise. In these difficult detection conditions it is often preferable that a VAD should fail-safe, indicating speech detected when the decision is in doubt, to lower the chance of losing speech segments. The biggest difficulty in the detection of speech in this environment is the very low signal-to-noise ratios (SNRs) that are encountered. It may be impossible to distinguish between speech and noise using simple level detection techniques when parts of the speech utterance are buried below the noise. == Applications == VAD is an integral part of different speech communication systems such as audio conferencing, echo cancellation, speech recognition, speech encoding, speaker recognition and hands-free telephony. In the field of multimedia applications, VAD allows simultaneous voice and data applications. Similarly, in Universal Mobile Telecommunications Systems (UMTS), it controls and reduces the average bit rate and enhances overall coding quality of speech. In cellular radio systems (for instance GSM and CDMA systems) based on Discontinuous Transmission (DTX) mode, VAD is essential for enhancing system capacity by reducing co-channel interference and power consumption in portable digital devices. In speech processing applications, voice activity detection plays an important role since non-speech frames are often discarded. For a wide range of applications such as digital mobile radio, Digital Simultaneous Voice and Data (DSVD) or speech storage, it is desirable to provide a discontinuous transmission of speech-coding parameters. Advantages can include lower average power consumption in mobile handsets, higher average bit rate for simultaneous services like data transmission, or a higher capacity on storage chips. However, the improvement depends mainly on the percentage of pauses during speech and the reliability of the VAD used to detect these intervals. On the one hand, it is advantageous to have a low percentage of speech activity. On the other hand, clipping, that is the loss of milliseconds of active speech, should be minimized to preserve quality. This is the crucial problem for a VAD algorithm under heavy noise conditions. === Use in telemarketing === One controversial application of VAD is in conjunction with predictive dialers used by telemarketing firms. In order to maximize agent productivity, telemarketing firms set up predictive dialers to call more numbers than they have agents available, knowing most calls will end up in either "Ring – No Answer" or answering machines. When a person answers, they typically speak briefly ("Hello", "Good evening", etc.) and then there is a brief period of silence. Answering machine messages are usually 3–15 seconds of continuous speech. By setting VAD parameters correctly, dialers can determine whether a person or a machine answered the call and, if it's a person, transfer the call to an available agent. If it detects an answering machine message, the dialer hangs up. Often, even when the system correctly detects a person answering the call, no agent may be available, resulting in a "silent call". Call screening with a multi-second message like "please say who you are, and I may pick up the phone" will frustrate such automated calls. == Performance evaluation == To evaluate a VAD, its output using test recordings is compared with those of an "ideal" VAD – created by hand-annotating the presence or absence of voice in the recordings. The performance of a VAD is commonly evaluated on the basis of the following four parameters: FEC (Front End Clipping): clipping introduced in passing from noise to speech activity; MSC (Mid Speech Clipping): clipping due to speech misclassified as noise; OVER: noise interpreted as speech due to the VAD flag remaining active in passing from speech activity to noise; NDS (Noise Detected as Speech): noise interpreted as speech within a silence period. Although the method described above provides useful objective information concerning the performance of a VAD, it is only an approximate measure of the subjective effect. For example, the effects of speech signal clipping can at times be hidden by the presence of background noise, depending on the model chosen for the comfort noise synthesis, so some of the clipping measured with objective tests is in reality not audible. It is therefore important to carry out subjective tests on VADs, the main aim of which is to ensure that the clipping perceived is acceptable. In VoIP applications, front-end clipping can be reduced by rewinding to shortly before the detection and sending very slightly delayed data. This kind of test requires a certain number of listeners to judge recordings containing the processing results of the VADs being tested, giving marks to several speech sequences on the following features: Quality; Comprehension difficulty; Audibility of clipping. These marks are then used to calculate average results for each of the features listed above, thus providing a global estimate of the behavior of the VAD being tested. To conclude, whereas objective methods are very useful in an initial stage to evaluate the quality of a VAD, subjective methods are more significant. As they require the participation of several people for a few days, increasing cost, they are generally only used when a proposal is about to be standardized. == Implementations == One early standard VAD is that developed by British Telecom for use in the Pan-European digital cellular mobile telephone service in 1991. It uses inverse filtering trained on non-speech segments to filter out background noise, so that it can then more reliably use a simple power-threshold to decide if a voice is present. The G.729 standard calculates the following features for its VAD: line spectral frequencies, full-band energy, low-band energy (<1 kHz), and zero-crossing rate. It applies a simple classification using a fixed decision boundary in the space defined by these features, and then applies smoothing and adaptive correction to improve the estimate. The GSM standard includes two VAD options developed by ETSI. Option 1 computes the SNR in nine bands and applies a threshold to these values. Option 2 calculates different parameters: channel power, voice metrics, and noise power. It then thresholds the voice metrics using a threshold that varies according to the estimated SNR. The Speex audio compression library uses a procedure named Improved Minima Controlled Recursive Averaging, which uses a smoothed representation of spectral pow
Read more →
Audio-visual speech recognition

Audio visual speech recognition (AVSR) is a technique that uses image processing capabilities in lip reading to aid speech recognition systems in recognizing indeterministic phones or giving preponderance among near probability decisions. Each system of lip reading and speech recognition works separately, then their results are mixed at the stage of feature fusion. As the name suggests, it has two parts. First one is the audio part and second one is the visual part. In audio part we use features like log mel spectrogram, mfcc etc. from the raw audio samples and we build a model to get feature vector out of it . For visual part generally we use some variant of convolutional neural network to compress the image to a feature vector after that we concatenate these two vectors (audio and visual ) and try to predict the target object.
Read more →
Co–Star

Co–Star is an American astrological social networking service founded in 2017, and headquartered in New York City. Users enter the date, time and place they were born to generate an astrological chart and daily horoscopes, which can be compared with those of other users. == History == The concept for Co-Star began in 2015 when Banu Guler created an astrological chart as a gift. The idea later developed into a mobile application with collaborators Anna Kopp and Ben Weitzman. The app publicly launched in 2017. The app includes astrological readings, charts, and daily push notifications that have been noted for their unconventional tone. In early 2018, the company raised a $750,000 pre-seed round from Female Founders Fund. In 2019, Co–Star raised a $5.2 million seed round from Maveron, Aspect, and 14W. In January 2020, Co–Star for Android was launched to a 120,000-person waitlist—two years after their iOS version. In April 2021, the company announced a $15 million Series A, led by Spark Capital. As of that date, Co–Star reported more than 20 million downloads and increased adoption among young women in the United States. == Features == Co–Star employs artificial intelligence to analyze publicly accessible NASA JPL data and find patterns in a user's transits. Co–Star's algorithm maps human-written snippets of text to planetary movements to display personalized content for each user. That content has been called “slightly robotic,” “wildly beautiful,” “truly insane," “brutally honest,” and compared to “a free therapy session.” In July 2023, Co–Star released an in-app service called The Void that allows users to ask open-ended questions and receive answers informed by Co–Star's astrological database.
Read more →
LENA Foundation

The LENA Foundation is an American nonprofit organisation which provides tools for measuring children's language acquisition and exposure. Specifically, the LENA system consists of a digital language processor which is worn by a child and records and analyses their auditory environment, using propriety software. It then presents a summary of child-adult conversation, such as conversation turns and word counts. The purpose of the LENA system is to encourage interactive talk between children (between the age of two to forty-eight months) and their caretakers. The LENA system is also used for research; while useful for researchers who wish to save transcription costs or observe the child in its natural state, the accuracy of this system, while often quite high, varies between contexts, for example notably in the case of hard of hearing children. Because of this, several researchers recommend caution in using only the LENA system on its own for the purposes of scientific research. == History == The LENA Foundation was established in 2009 by Terrance and Judith Paul, founders of Renaissance Learning, Inc., with the purpose of aiding children with disabilities and assisting with early learning. They were inspired by the book "Meaningful Differences in the Everyday Experience of American Children" by Dr. Betty Hart and Dr. Todd Risley. A pilot version of the LENA system was launched in February 2006. The LENA Research Foundation was registered as a tax-exempt 501(c)(3) nonprofit in September 2010. The organisation was renamed simply LENA in 2018 and adopted the tagline "Building brains through early talk." LENA has been used for parental feedback, linguistics or paediatrics research, and for specific clinical cases. == Scientific background == In 2018, research using the LENA system showed that there was a link between children's conversational turns and activation of Broca's area (a part of the brain responsible, although not necessarily essential, for language processing). The LENA foundation cites research by its own employees as evidence for the scientific basis of its technology. Said research claims that verbal interaction with young children has an effect on language acquisition, including verbal comprehension skills during adolescence. == LENA System == The LENA software analyses a child's natural language environment, such as verbal exposure, and provides several metrics, such as adult and child speech time, television/recorded audio time, word count, or conversation turn count. The LENA hardware is a recorder that is usually placed into a child's specially-designed vest. The software was trained on over 65,000 hours of manually annotated American English audio recordings. It splits the audio into segments which are categorised as "key child", "other child", "male adult", "noise", etc. The advantages of LENA as opposed to manual transcription are its speed and ease of use; the disadvantages are its potential inaccuracies and lack of transcription capability (which LENA does not profess to attempt). The LENA system has also been criticised for prioritising quantity of speaking over quality (i.e., mastery of the language, as opposed to babble). == Product lines == === LENA Start === LENA Start is a program for parents that utilises feedback from the LENA System in conjunction with weekly group sessions in order to address the home language environment. It was introduced in 2015 and implemented across several U.S. states. In October 2020, during the restrictions of the COVID-19 pandemic, Read Aloud Delaware began a virtual LENA Start program with families statewide, where parents received feedback and participated in one-hour Zoom workshops each week during the 10-week program. === LENA Grow === LENA Grow is a professional development program for teachers in early childhood classrooms. Before launching at sites around the country, the program was first piloted in Escambia County, Florida. === LENA Home === LENA Home is a supplement to existing parent coaching curricula. Typically, home visitors facilitate the use of the LENA System to help parents track their progress towards increasing interactive talk in their homes. === Developmental Snapshot === The LENA Developmental Snapshot, based on a 52-question parent survey, assesses both expressive and receptive language skills and provides an estimate of a child's developmental age from 2 months to 36 months.
Read more →
CapCut

CapCut, known domestically as JianYing (Chinese: 剪映; pinyin: Jiǎnyìng) and formerly internationally as ViaMaker, is a video editor developed by ByteDance, available as a mobile app, desktop app, and web app. == History == The app was first released in China in 2019 and was initially available for iPhone and Android. In 2020, it was rebranded in English from ViaMaker to CapCut and became available globally. It later expanded to include web and desktop versions for Mac and Windows. In 2022, CapCut reached 200 million active users. According to The Wall Street Journal, in March 2023, it was the second-most downloaded app in the U.S., behind that of Chinese discount retailer Temu. In January 2025, CapCut had over 1 billion downloads on the Google Play Store. On February 1, 2021, CapCut Pro for Windows was launched. On November 27, the Pro version for Mac was launched. In July 2025, CapCut Pro for HarmonyOS was available on HarmonyOS NEXT tablets. In July 2024, CapCut was reported by the South China Morning Post to be a generative AI (GenAI) application that led global AI app downloads, with approximately 38.42 million downloads and 323 million monthly active users. == Features == CapCut supports basic video editing functions, including editing, trimming, and adding or splitting clips. Editing projects is limited to single-layer editing, but the app supports overlay options that enable additional effects, including multi-layer editing. The app includes a library of pre-made templates and a tool that generates editable video captions. It also provides photo editing tools, including retouch and product photo features integrated within the editing interface. CapCut's video editor includes AI-based features such as video and script generation. Users can export or save completed projects directly to different social media platforms. CapCut includes a free version and a paid Pro version with cloud storage and advanced features. == Controversies == === Illegal data collection === In July 2023, many users of CapCut accused it of illegally profiting off their personal data. A class-action lawsuit filed in the U.S. District Court for the Northern District of Illinois on July 28, 2023, alleged that CapCut illegally harvests and profits from user data including biometric information and geolocation without consent. In September 2025, a federal court excluded most of the lawsuit, which alleged that TikTok’s parent company improperly scraped private data from CapCut's video editing software, as lacking grounds, with some of the class action continuing to move forward. == Bans and restrictions == === Ban in India === As a response to border clashes with China in May 2020, the Indian government banned around 56 Chinese applications including CapCut and TikTok, which is owned by CapCut's parent company ByteDance. Indian users were unable to use and download the application. As of February 2022, around 273 Chinese applications have been banned by the Indian government under the concern of national security and Indian user privacy. === Ban in the United States === On January 18, 2025, at 10 PM EST, CapCut was banned in the United States along with TikTok and all other ByteDance apps due to the implementation of the Protecting Americans from Foreign Adversary Controlled Applications Act. Hours after the suspension of services took effect, President Donald Trump indicated on Truth Social that he would issue an executive order on the day of his inauguration "to extend the period of time before the law's prohibitions take effect". On January 21, CapCut began restoring service. On February 13, Google and Apple restored CapCut on the App Store and Google Play Store.
Read more →
Artbreeder

Artbreeder, formerly known as Ganbreeder, is a collaborative, machine learning-based art website. Using the models StyleGAN and BigGAN, the website allows users to generate and modify images of faces, landscapes, and paintings, among other categories. == Overview == On Artbreeder, users mainly interact through the remixing - referred to as 'breeding' - of other users' images found in the publicly accessible database of images. The creation of new variations can be done by tweaking sliders on an image's page, known as "genes", which in the "Portraits" model can range from color balance to gender, facial hair, and glasses. Additionally, any image can be "crossbred" with other publicly viewable images from the database, using a slider to control how much of each image should influence the resulting "child". The site also allows for uploading new images, which the model will attempt to convert into the latent space of the network. == Notable usages == The similarly AI-driven text adventure game AI Dungeon uses Artbreeder to generate profile pictures for its users, and The Static Age's Andrew Paley has used Artbreeder to create the visuals for his music videos. Artbreeder has been used to create portraits of characters from popular novels such as Harry Potter and Twilight. They have also been used to add realistic features to ancient portraits. Artbreeder was used to create characters in the sequel to Ben Drowned with the titular villain, an AI-construct itself, created entirely using the website. == Changes to Artbreeder == ArtBreeder underwent an overhaul, introducing several features to enhance the user experience. Among these updates is the integration SD-XL, developed by stability.ai. Additionally, ArtBreeder also added a functionality known as ControlNet, which enables users to create images based on specific poses. With ControlNet, users can incorporate various poses into their AI Artworks. More features that were introduced into Artbreeder, are Pattern, which creates AI Pattern Images, Outpainting or Uncropping was also an added feature to Artbreeder, that allows the user to expand the image beyond the normal dimensions of the image. == Reception == The artwork generated by users of the website has been described as "beautiful" and "surreal," drawing comparisons to "weird, incomprehensible dreams" that "somehow touch the deep, unconscious parts of [the] mind". However, the generated faces were noted as "creepy and 'off'", and still nowhere near the quality attained by actual digital artists. Additionally, the site faced criticism for perceived confusing aspects of the AI's behavior. Jonathan Bartlett of Mind Matters News noted that "As is always the case with AI, sometimes the [gene] knobs don't work as expected and sometimes the results are... strange," while conceding that Artbreeder was still "probably the start of a new future of made-to-order stock images." Writers from Hyperallergic also took issue with perceived racial biases in the Portraits model, citing a comment from a user who faced difficulty from the neural network while attempting to darken the skin of a portrait to match a source image.
Read more →