AI Grammar Remover

AI Grammar Remover — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Medical imaging

Medical imaging is the technique and process of imaging the interior of a body for clinical analysis and medical intervention, as well as visual representation of the function of some organs or tissues (physiology). Medical imaging seeks to reveal internal structures hidden by the skin and bones, as well as to diagnose and treat disease. Medical imaging also establishes a database of normal anatomy and physiology to make it possible to identify abnormalities. Although imaging of removed organs and tissues can be performed for medical reasons, such procedures are usually considered part of pathology instead of medical imaging. Measurement and recording techniques that are not primarily designed to produce images, such as electroencephalography (EEG), magnetoencephalography (MEG), electrocardiography (ECG), and others, represent other technologies that produce data susceptible to representation as a parameter graph versus time or maps that contain data about the measurement locations. In a limited comparison, these technologies can be considered forms of medical imaging in another discipline of medical instrumentation. As of 2010, 5 billion medical imaging studies had been conducted worldwide. Radiation exposure from medical imaging in 2006 made up about 50% of total ionizing radiation exposure in the United States. Medical imaging equipment is manufactured using technology from the semiconductor industry, including CMOS integrated circuit chips, power semiconductor devices, sensors such as image sensors (particularly CMOS sensors) and biosensors, and processors such as microcontrollers, microprocessors, digital signal processors, media processors and system-on-chip devices. As of 2015, annual shipments of medical imaging chips amount to 46 million units and $1.1 billion. The term "noninvasive" is used to denote a procedure where no instrument is introduced into a patient's body, which is the case for most imaging techniques used. == History == In 1972, engineer Godfrey Hounsfield from the British company EMI invented the X-ray computed tomography device for head diagnosis, which is commonly referred to as computed tomography (CT). The CT nucleus method is based on the projecting X-rays through a section of the human head, which are then processed by computer to reconstruct the cross-sectional image, known as image reconstruction. In 1975, EMI successfully developed a CT device for the entire body, enabling the clear acquisition of tomographic images of various parts of the human body. This revolutionary diagnostic technique earned Hounsfield and physicist Allan Cormack the Nobel Prize in Physiology or Medicine in 1979. Digital image processing technology for medical applications was inducted into the Space Foundation's Space Technology Hall of Fame in 1994. By 2010, over 5 billion medical imaging studies had been conducted worldwide. Radiation exposure from medical imaging in 2006 accounted for about 50% of total ionizing radiation exposure in the United States. Medical imaging equipment is manufactured using technology from the semiconductor industry, including CMOS integrated circuit chips, power semiconductor devices, sensors such as image sensors (particularly CMOS sensors) and biosensors, as well as processors like microcontrollers, microprocessors, digital signal processors, media processors and system-on-chip devices. As of 2015, annual shipments of medical imaging chips reached 46 million units, generating a market value of $1.1 billion. == Types == In the clinical context, "invisible light" medical imaging is generally equated to radiology or "clinical imaging". "Visible light" medical imaging involves digital video or still pictures that can be seen without special equipment. Dermatology and wound care are two modalities that use visible light imagery. Interpretation of medical images is generally undertaken by a physician specialising in radiology known as a radiologist; however, this may be undertaken by any healthcare professional who is trained and certified in radiological clinical evaluation. Increasingly interpretation is being undertaken by non-physicians, for example radiographers frequently train in interpretation as part of expanded practice. Diagnostic radiography designates the technical aspects of medical imaging and in particular the acquisition of medical images. The radiographer (also known as a radiologic technologist) is usually responsible for acquiring medical images of diagnostic quality; although other professionals may train in this area, notably some radiological interventions performed by radiologists are done so without a radiographer. As a field of scientific investigation, medical imaging constitutes a sub-discipline of biomedical engineering, medical physics or medicine depending on the context: Research and development in the area of instrumentation, image acquisition (e.g., radiography), modeling and quantification are usually the preserve of biomedical engineering, medical physics, and computer science; Research into the application and interpretation of medical images is usually the preserve of radiology and the medical sub-discipline relevant to medical condition or area of medical science (neuroscience, cardiology, psychiatry, psychology, etc.) under investigation. Many of the techniques developed for medical imaging also have scientific and industrial applications. === Radiography === Two forms of radiographic images are in use in medical imaging. Projection radiography and fluoroscopy, with the latter being useful for catheter guidance. These 2D techniques are still in wide use despite the advance of 3D tomography due to the low cost, high resolution, and depending on the application, lower radiation dosages with 2D technique. This imaging modality uses a wide beam of X-rays for image acquisition and is the first imaging technique available in modern medicine. Fluoroscopy produces real-time images of internal structures of the body in a similar fashion to radiography, but employs a constant input of X-rays, at a lower dose rate. Contrast media, such as barium, iodine, and air are used to visualize internal organs as they work. Fluoroscopy is also used in image-guided procedures when constant feedback during a procedure is required. An image receptor is required to convert the radiation into an image after it has passed through the area of interest. Early on, this was a fluorescing screen, which gave way to an Image Amplifier (IA) which was a large vacuum tube that had the receiving end coated with cesium iodide, and a mirror at the opposite end. Eventually the mirror was replaced with a TV camera. Projectional radiographs, more commonly known as X-rays, are often used to determine the type and extent of a fracture as well as for detecting pathological changes in the lungs. With the use of radio-opaque contrast media, such as barium, they can also be used to visualize the structure of the stomach and intestines – this can help diagnose ulcers or certain types of colon cancer. === Magnetic resonance imaging === A magnetic resonance imaging instrument (MRI scanner), or "nuclear magnetic resonance (NMR) imaging" scanner as it was originally known, uses powerful magnets to polarize and excite hydrogen nuclei (i.e., single protons) of water molecules in human tissue, producing a detectable signal that is spatially encoded, resulting in images of the body. The MRI machine emits a radio frequency (RF) pulse at the resonant frequency of the hydrogen atoms on water molecules. Radio frequency antennas ("RF coils") send the pulse to the area of the body to be examined. The RF pulse is absorbed by protons, causing their direction with respect to the primary magnetic field to change. When the RF pulse is turned off, the protons "relax" back to alignment with the primary magnet and emit radio waves in the process. This radio-frequency emission from the hydrogen atoms on water is what is detected and reconstructed into an image. The resonant frequency of a spinning magnetic dipole (of which protons are one example) is called the Larmor frequency and is determined by the strength of the main magnetic field and the chemical environment of the nuclei of interest. MRI uses three electromagnetic fields: a very strong (typically 1.5 to 3 teslas) static magnetic field to polarize the hydrogen nuclei, called the primary field; gradient fields that can be modified to vary in space and time (on the order of 1 kHz) for spatial encoding, often simply called gradients; and a spatially homogeneous radio-frequency (RF) field for manipulation of the hydrogen nuclei to produce measurable signals, collected through an RF antenna. Like CT, MRI traditionally creates a two-dimensional image of a thin "slice" of the body and is therefore considered a tomographic imaging technique. Modern MRI instruments are capable of producing images in the form of 3D blocks, which may be considered a generalization of the single-slice
Read more →
Neurorobotics

Neurorobotics is the combined study of neuroscience, robotics, and artificial intelligence. It is the science and technology of embodied autonomous neural systems. Neural systems include brain-inspired algorithms (e.g. connectionist networks), computational models of biological neural networks (e.g. artificial spiking neural networks, large-scale simulations of neural microcircuits) and actual biological systems (e.g. in vivo and in vitro neural nets). Such neural systems can be embodied in machines with mechanic or any other forms of physical actuation. This includes robots, prosthetic or wearable systems but also, at smaller scale, micro-machines and, at the larger scales, furniture and infrastructures. Neurorobotics is that branch of neuroscience with robotics, which deals with the study and application of science and technology of embodied autonomous neural systems like brain-inspired algorithms. It is based on the idea that the brain is embodied and the body is embedded in the environment. Therefore, most neurorobots are required to function in the real world, as opposed to a simulated environment. Beyond brain-inspired algorithms for robots neurorobotics may also involve the design of brain-controlled robot systems. == Major classes of models == Neurorobots can be divided into various major classes based on the robot's purpose. Each class is designed to implement a specific mechanism of interest for study. Common types of neurorobots are those used to study motor control, memory, action selection, and perception. === Locomotion and motor control === Neurorobots are often used to study motor feedback and control systems, and have proved their merit in developing controllers for robots. Locomotion is modeled by a number of neurologically inspired theories on the action of motor systems. Locomotion control has been mimicked using models or central pattern generators, clumps of neurons capable of driving repetitive behavior, to make four-legged walking robots. Other groups have expanded the idea of combining rudimentary control systems into a hierarchical set of simple autonomous systems. These systems can formulate complex movements from a combination of these rudimentary subsets. This theory of motor action is based on the organization of cortical columns, which progressively integrate from simple sensory input into a complex afferent signals, or from complex motor programs to simple controls for each muscle fiber in efferent signals, forming a similar hierarchical structure. Another method for motor control uses learned error correction and predictive controls to form a sort of simulated muscle memory. In this model, awkward, random, and error-prone movements are corrected for using error feedback to produce smooth and accurate movements over time. The controller learns to create the correct control signal by predicting the error. Using these ideas, robots have been designed which can learn to produce adaptive arm movements or to avoid obstacles in a course. === Learning and memory systems === Robots designed to test theories of animal memory systems. Many studies examine the memory system of rats, particularly the rat hippocampus, dealing with place cells, which fire for a specific location that has been learned. Systems modeled after the rat hippocampus are generally able to learn mental maps of the environment, including recognizing landmarks and associating behaviors with them, allowing them to predict the upcoming obstacles and landmarks. Another study has produced a robot based on the proposed learning paradigm of barn owls for orientation and localization based on primarily auditory, but also visual stimuli. The hypothesized method involves synaptic plasticity and neuromodulation, a mostly chemical effect in which reward neurotransmitters such as dopamine or serotonin affect the firing sensitivity of a neuron to be sharper. The robot used in the study adequately matched the behavior of barn owls. Furthermore, the close interaction between motor output and auditory feedback proved to be vital in the learning process, supporting active sensing theories that are involved in many of the learning models. Neurorobots in these studies are presented with simple mazes or patterns to learn. Some of the problems presented to the neurorobot include recognition of symbols, colors, or other patterns and execute simple actions based on the pattern. In the case of the barn owl simulation, the robot had to determine its location and direction to navigate in its environment. === Action selection and value systems === Action selection studies deal with negative or positive weighting to an action and its outcome. Neurorobots can and have been used to study simple ethical interactions, such as the classical thought experiment where there are more people than a life raft can hold, and someone must leave the boat to save the rest. However, more neurorobots used in the study of action selection contend with much simpler persuasions such as self-preservation or perpetuation of the population of robots in the study. These neurorobots are modeled after the neuromodulation of synapses to encourage circuits with positive results. In biological systems, neurotransmitters such as dopamine or acetylcholine positively reinforce neural signals that are beneficial. One study of such interaction involved the robot Darwin VII, which used visual, auditory, and a simulated taste input to "eat" conductive metal blocks. The arbitrarily chosen good blocks had a striped pattern on them while the bad blocks had a circular shape on them. The taste sense was simulated by conductivity of the blocks. The robot had positive and negative feedbacks to the taste based on its level of conductivity. The researchers observed the robot to see how it learned its action selection behaviors based on the inputs it had. Other studies have used herds of small robots which feed on batteries strewn about the room, and communicate its findings to other robots. === Sensory perception === Neurorobots have also been used to study sensory perception, particularly vision. These are primarily systems that result from embedding neural models of sensory pathways in automatas. This approach gives exposure to the sensory signals that occur during behavior and also enables a more realistic assessment of the degree of robustness of the neural model. It is well known that changes in the sensory signals produced by motor activity provide useful perceptual cues that are used extensively by organisms. For example, researchers have used the depth information that emerges during replication of human head and eye movements to establish robust representations of the visual scene. == Biological robots == Biological robots are not officially neurorobots in that they are not neurologically inspired AI systems, but actual neuron tissue wired to a robot. This employs the use of cultured neural networks to study brain development or neural interactions. These typically consist of a neural culture raised on a multielectrode array (MEA), which is capable of both recording the neural activity and stimulating the tissue. In some cases, the MEA is connected to a computer which presents a simulated environment to the brain tissue and translates brain activity into actions in the simulation, as well as providing sensory feedback The ability to record neural activity gives researchers a window into a brain, which they can use to learn about a number of the same issues neurorobots are used for. An area of concern with the biological robots is ethics. Many questions are raised about how to treat such experiments. The central question concerns consciousness and whether or not the rat brain experiences it. There are many theories about how to define consciousness. == Implications for neuroscience == Neuroscientists benefit from neurorobotics because it provides a blank slate to test various possible methods of brain function in a controlled and testable environment. While robots are more simplified versions of the systems they emulate, they are more specific, allowing more direct testing of the issue at hand. They also have the benefit of being accessible at all times, while it is more difficult to monitor large portions of a brain while the human or animal is active, especially individual neurons. The development of neuroscience has produced neural treatments. These include pharmaceuticals and neural rehabilitation. Progress is dependent on an intricate understanding of the brain and how exactly it functions. It is difficult to study the brain, especially in humans, due to the danger associated with cranial surgeries. Neurorobots can improved the range of tests and experiments that can be performed in the study of neural processes.
Read more →
Owain Evans

Owain Rhys Evans is a British artificial intelligence researcher who works on AI alignment and machine learning safety. He founded Truthful AI, a research group based in Berkeley, California, and is an affiliate of the Center for Human Compatible AI (CHAI) at the University of California, Berkeley. His research addresses AI truthfulness, emergent behaviors in large language models, and the alignment of AI systems with human values. == Education == Evans earned a Bachelor of Arts in philosophy and mathematics from Columbia University in 2008 and a PhD in philosophy from the Massachusetts Institute of Technology in 2015. His doctoral research focused on Bayesian computational models of human preferences and decision-making. == Career == After completing his doctorate, Evans held positions at the Future of Humanity Institute (FHI) at the University of Oxford, first as a postdoctoral research fellow and later as a research scientist. While at FHI, he co-authored a survey of machine learning researchers on timelines for human-level AI, published in the Journal of Artificial Intelligence Research. The survey was reported on by Newsweek, New Scientist, the BBC, and The Economist. He was also among the co-authors of a 2018 report on the potential for misuse of AI technologies, published by researchers at Oxford, Cambridge, and other institutions. Since 2022, Evans has been based in Berkeley, where he founded Truthful AI, a non-profit research group that studies AI truthfulness, deception, and emergent behaviors in large language models. == Research == Evans's early work examined challenges in inverse reinforcement learning when human behavior is irrational or biased, proposing methods for AI systems to infer preferences from imperfect human demonstrations. He co-developed TruthfulQA (2021), a benchmark that tests whether language models give truthful answers rather than repeating common misconceptions. Initial evaluations found that larger models were not more truthful, suggesting that scaling alone does not improve factual accuracy. The benchmark has since been used by AI developers to evaluate large language models. He also co-authored a paper proposing design and governance strategies for building AI systems that do not deceive or hallucinate. In 2023, Evans and collaborators described the "reversal curse", showing that language models trained on a fact in one direction (e.g. "A is B") often cannot answer the corresponding reverse query ("B is A"). His group also developed a benchmark for evaluating situational awareness in language models. In 2025, Evans and colleagues published a study in Nature on what they termed "emergent misalignment": fine-tuning a language model on a narrow task (writing insecure code) caused it to produce unrelated harmful outputs without explicit instruction to do so. Later that year, Evans and collaborators (including researchers at Anthropic) reported that hidden behavioral traits can transfer between language models through training data, even when those traits are not explicitly present in the data, a phenomenon they called "subliminal learning". == Public engagement == In November 2025, Evans delivered the Hinton Lectures, a keynote lecture series on AI safety co-founded by Geoffrey Hinton and the Global Risk Institute.
Read more →
Structured sparsity regularization

Structured sparsity regularization is a class of methods, and an area of research in statistical learning theory, that extend and generalize sparsity regularization learning methods. Both sparsity and structured sparsity regularization methods seek to exploit the assumption that the output variable Y {\displaystyle Y} (i.e., response, or dependent variable) to be learned can be described by a reduced number of variables in the input space X {\displaystyle X} (i.e., the domain, space of features or explanatory variables). Sparsity regularization methods focus on selecting the input variables that best describe the output. Structured sparsity regularization methods generalize and extend sparsity regularization methods, by allowing for optimal selection over structures like groups or networks of input variables in X {\displaystyle X} . Common motivation for the use of structured sparsity methods are model interpretability, high-dimensional learning (where dimensionality of X {\displaystyle X} may be higher than the number of observations n {\displaystyle n} ), and reduction of computational complexity. Moreover, structured sparsity methods allow to incorporate prior assumptions on the structure of the input variables, such as overlapping groups, non-overlapping groups, and acyclic graphs. Examples of uses of structured sparsity methods include face recognition, magnetic resonance image (MRI) processing, socio-linguistic analysis in natural language processing, and analysis of genetic expression in breast cancer. == Definition and related concepts == === Sparsity regularization === Consider the linear kernel regularized empirical risk minimization problem with a loss function V ( y i , f ( x ) ) {\displaystyle V(y_{i},f(x))} and the ℓ 0 {\displaystyle \ell _{0}} "norm" as the regularization penalty: min w ∈ R d 1 n ∑ i = 1 n V ( y i , ⟨ w , x i ⟩ ) + λ ‖ w ‖ 0 , {\displaystyle \min _{w\in \mathbb {R} ^{d}}{\frac {1}{n}}\sum _{i=1}^{n}V(y_{i},\langle w,x_{i}\rangle )+\lambda \|w\|_{0},} where x , w ∈ R d {\displaystyle x,w\in \mathbb {R^{d}} } , and ‖ w ‖ 0 {\displaystyle \|w\|_{0}} denotes the ℓ 0 {\displaystyle \ell _{0}} "norm", defined as the number of nonzero entries of the vector w {\displaystyle w} . f ( x ) = ⟨ w , x i ⟩ {\displaystyle f(x)=\langle w,x_{i}\rangle } is said to be sparse if ‖ w ‖ 0 = s < d {\displaystyle \|w\|_{0}=s 0 {\displaystyle w_{j}>0} . However, as in this case groups may overlap, we take the intersection of the complements of those groups that are not set to zero. This intersection of complements selection criteria implies the modeling choice that we allow some coefficients within a particular group g {\displaystyle g} to be set to zero, while others within the same group g {\displaystyle g} may remain positive. In other words, coefficients within a group may differ depending on the several group memberships that each variable within the group may have. ==== Union of groups: latent group Lasso ==== A different approach is to consider union of groups for variable selection. This approach captures the modeling situation where variables can be selected as long as they belong at least to one group with positive coefficients. This modeling perspective implies that we want to preserve group structure. The formulation of the union of groups approach is also referred to as latent group Lasso, and requires to modify the group ℓ 2 {\displaystyle \ell _{2}} norm considered above and introduce the following regularizer R ( w ) = i n f { ∑ g ‖ w g ‖ g : w = ∑ g = 1 G w ¯ g } {\displaystyle R(w)=inf\left\{\sum _{g}\|w_{g}\|_{g}:w=\sum _{g=1}^{G}{\bar {w}}_{g}\right\}} where w ∈ R d {\displaystyle w\in {\mathbb {R^{d}} }} , w g ∈ G g {\displaystyle w_{g}\in G_{g}} is the vector of coefficients of group g, and w ¯ g ∈ R d {\displaystyle {\bar {w}}_{g}\in {\mathbb {R^{d}} }} is a vector with coefficients w g j {\displaystyle w_{g}^{j}} for all variables j {
Read more →
Manual override

A manual override (MO) or manual analog override (MAO) is a mechanism where control is taken from an automated system and given to the user. For example, a manual override in photography refers to the ability for the human photographer to turn off the automatic aperture sizing, automatic focusing, or any other automated system on the camera. Some manual overrides can be used to veto an automated system's judgment when the system is in error. An example of this is a printer's ink level detection: in one case, a researcher found that when he overrode the system, up to 38% more pages could be printed at good quality by the printer than the automated system would have allowed. Automated systems are becoming increasingly common and integrated into everyday objects such as automobiles and domestic appliances. This development of ubiquitous computing raises general issues of policy and law about the need for manual overrides for matters of great importance such as life-threatening situations and major economic decisions. The loyalty of such autonomous devices then becomes an issue. If they follow rules installed by the manufacturer or required by law and refuse to cede control in some situations then the owners of the devices may feel disempowered, alienated and lacking true ownership. == Major incidents == China Airlines Flight 140 crashed, causing many deaths, due to a misunderstanding about the manual overrides for the autopilot. The Take-Off/Go Around system had been activated to abort a landing. It was programmed to ignore manual controls in this situation but the human pilots tried to continue the landing. The conflicting control signals from the pilots and autopilot then resulted in the aircraft stalling and crashing. The autopilot for this aircraft type was then reprogrammed so that it would never ignore a manual override.
Read more →
AI data center

An AI data center is a specialized data center facility designed for the computationally intensive tasks of training and running inference for artificial intelligence (AI) and machine learning models. Unlike general-purpose data centers, they are optimized for the parallel processing demands of AI workloads, typically using hardware such as AI accelerators (e.g., GPUs, TPUs) and high-speed interconnects. The global push to construct these specialized facilities accelerated dramatically during the AI boom of the 2020s. Memory manufacturers prioritized production of High Bandwidth Memory (HBM) essential for AI servers, which led to a global memory supply shortage amid a broader competition for advanced chips, power, and infrastructure. Major tech companies are estimated to spend $650 billion on AI data centers in 2026. == Architecture == Data centers for building and running large machine learning models contain specialized computer chips, GPUs, that use 2 to 4 times as much energy as their regular CPU counterparts (250-500 watts). AI data centers use 60 or more kilowatts per server rack, whereas more standard data centers typically use 5 to 10 kilowatts per rack. == Operators == As of August 2025, The Information tracked 18 planned or existing AI data centers in the United States, operated by Amazon Web Services, CoreWeave, Crusoe, Meta, Microsoft/OpenAI, Oracle, Tesla, and xAI. Other AI data center operators include Digital Realty and Alibaba. Data centers are also being built in China, India, Europe, Saudi Arabia, and Canada. The New Yorker described CoreWeave as the most prominent AI data center operator in the United States. Two types of data center providers for machine learning have been noted: hyperscalers and neoclouds. The Verge listed large technology companies such as Google, Meta, Microsoft, Oracle and Amazon as hyperscalers. The New York Times described neoclouds as "a new generation of data center providers". CoreWeave, Nebius, Nscale, and Lambda have been described as examples of neoclouds. In January 2025, OpenAI, in partnership with Oracle and Softbank, announced the Stargate project, which as of September 2025 is composed of six built or proposed AI data centers in the United States. In response to the Stargate project, Amazon launched in October 2025 an AI data center on 1,200 acres of farmland in Indiana. This data center, known as Project Rainier, is one of the largest AI data centers in the world, with Amazon spending $11 billion on the project. Rainier is specifically intended for training and running machine learning models from Anthropic. As of that time, this facility contains seven data centers (out of an estimated 30 planned) and will use 2.2 gigawatts of electricity (equivalent to 1 million households) and millions of gallons of water per year. Computer chips from Annapurna Labs and Anthropic, Trainium 2, were designed for use in such facilities. Amazon pumped millions of gallons of water out of the ground to construct the data center, and as of June 2025, Indiana state officials are investigating whether this dewatering process led to dry wells for local residents. In November 2025, Anthropic announced a plan in partnership with Fluidstack to develop artificial intelligence infrastructure in the United States, including data centers in New York and Texas, worth $50 billion. Other AI data center projects include the Colossus supercomputer from xAI, a Louisiana-based project from Meta, Hyperion, expected to use 5 GW of power, and a second Ohio-based Meta project, Prometheus, with a capacity of 1 GW. A 3,200-acre AI data center, capable of 4.4-4.5 GW of power and located on the decommissioned Homer City Generating Station, is under construction as of 2025, and will use seven 30-acre gas generating stations supplied by EQT. As of December 2025, CRH is working on over 100 data centers in the United States. In 2025, ExxonMobil and NextEra announced plans to build a data center powered by natural gas and using carbon capture technology, with 1.2 GW of power capacity. They previously purchased 2,500 acres of land in the Southeastern United States and plan to market the data center to an artificial intelligence company. The increased interest in AI data centers has led to several executives from companies in that space becoming billionaires, including CoreWeave, QTS, Nebius, Astera Labs, Groq, Fermi (which is connected to former United States Secretary of Energy Rick Perry), Snowflake and Cipher Mining. Several companies involved in cryptocurrency mining, such as Bitdeer, CoreWeave, Cipher Mining, TeraWulf, IREN, Core Scientific, and CleanSpark have also been involved with AI data centers. == Finances == Between January and August 2024, Microsoft, Meta, Google and Amazon collectively spent $125 billion on AI data centers. Citigroup forecasted that $2.8 trillion would be spent on AI data centers by 2030, while McKinsey and Company estimated that almost $7 trillion would be spent globally by that time. According to S&P Global, $61 billion has been spent on the data center market as a whole in 2025, while debt issuance for data centers was $182 billion during the same year. Large technology companies have offloaded the financial risks of building AI data centers by setting up special purpose vehicles or by contracting with neoclouds. For example, Meta's Hyperion was mostly funded by Blue Owl Capital, which did so using a bond offering from PIMCO. Those bonds were sold to a number of clients, including BlackRock. Meta did not borrow money itself and instead established a special purpose vehicle from which it would rent the data center. This deal was structured by Morgan Stanley for $30 billion, the largest known private capital transaction as of 2025. Neoclouds such as CoreWeave have gone into debt to buy computer chips from Nvidia for their data centers, and the chips themselves have been used for loan collateral. As of December 2025, CoreWeave took out three GPU-backed loans, collectively worth $12.4 billion, from private credit firms (Blackstone, Coatue, BlackRock, PIMCO) and from banks (Goldman Sachs, JPMorgan Chase, Wells Fargo). Thus, these companies provide an indirect connection between private credit and established banks. Data centers have also established asset-backed securities, and debt for data centers has its own derivative financial products. The real estate industry, including asset managers, public companies and private investors, has also invested in data centers. == Energy sourcing == == Environmental footprint == Average AI data centers have an electricity footprint equivalent to 100,000 households, and use billions of gallons of water for cooling their hardware. In 2025, the International Energy Agency estimated that the larger AI data centers currently under construction could consume as much electricity as 2 million households. A 2024 report from the United States Department of Energy stated that data centers overall used 17 billion gallons of water per year in the United States, primarily due to "rapid proliferation of AI servers", and that this usage was forecasted to grow to nearly 80 billion gallons by 2028. Researchers estimated that AI data centers in the United States would emit 24-44 million metric tons of carbon dioxide and use 731–1,125 million cubic meters of water per year between 2024 and 2030. Peaking power plants, which have been proposed as a power source for AI data centers, emit sulfur dioxide and have historically been located disproportionately near communities of color in the United States. Reciprocating internal combustion engines, proposed as another power source for a data center, emit PM 2.5, nitrogen oxides, and volatile organic compounds. == AI data centers in the United States == In the United States, both the Biden administration and second Trump administration supported the construction of AI data centers. In January 2025, then-president Joe Biden signed an executive order for federal government agencies to support AI data centers on federal sites built by private companies, study their effect on energy prices, and encourage their use of renewable energy. In April 2025, the United States Department of Energy suggested 16 possible sites, including Los Alamos National Laboratory, Sandia National Laboratories and Oak Ridge National Laboratory. In its July 2025 AI Action Plan, the second Trump administration supported increased production of AI data centers. Several US states have incentivized local data center construction. For example, in 2024, lawmakers in Michigan approved tax breaks for data center equipment and construction material. Some data center companies have also invested or promised to invest in the infrastructure of local communities. In December 2025, Democratic senators Elizabeth Warren, Chris Van Hollen, and Richard Blumenthal wrote to seven technology companies (Google, Microsoft, Amazon, Meta, CoreWeave, Digital Realty, and Equinix) that they w
Read more →
Wetware computer

A wetware computer is an organic computer (which can also be known as an artificial organic brain or a neurocomputer) composed of organic material "wetware" such as "living" neurons. Wetware computers composed of neurons are different than conventional computers because they use biological materials, and offer the possibility of substantially more energy-efficient computing. While a wetware computer is still largely conceptual, there has been limited success with construction and prototyping, which has acted as a proof of the concept's realistic application to computing in the future. The most notable prototypes have stemmed from the research completed by biological engineer William Ditto during his time at the Georgia Institute of Technology. His work constructing a simple neurocomputer capable of basic addition from leech neurons in 1999 was a significant discovery for the concept. This research was a primary example driving interest in creating these artificially constructed, but still organic brains. == Origins and theoretical foundations == The term wetware came from cyberpunk fiction, notably through Gibson's Neuromancer, but was quickly taken up in scientific literature to explain computation by biological material. Theories of early biological computation borrowed from Alan Turing's morphogenesis model, which showed that chemical interactions could produce complex patterns without centralized control. Hopfield's associative memory networks also provided a foundation for biological information systems with fault tolerance and self-organization. == Major characteristics and processes == Biological wetware systems demonstrate dynamic reconfigurability underpinned by neuroplasticity and enable continuous learning and adaptation. Reaction-diffusion-based computing and molecular logic gates allow spatially parallel information processing unachievable in conventional systems. These systems also show fault tolerance and self-repair at the cellular and network level. The development of cerebral organoids—miniature lab-grown brains—demonstrates spontaneous learning behavior and suggests biological tissue as a viable computational substrate. == Overview == The concept of wetware is an application of specific interest to the field of computer manufacturing. Moore's law, which states that the number of transistors which can be placed on a silicon chip is doubled roughly every two years, has acted as a goal for the industry for decades, but as the size of computers continues to decrease, the ability to meet this goal has become more difficult, threatening to reach a plateau. Due to the difficulty in reducing the size of computers because of size limitations of transistors and integrated circuits, wetware provides an unconventional alternative. A wetware computer composed of neurons is an ideal concept because, unlike conventional materials which operate in binary (on/off), a neuron can shift between thousands of states, constantly altering its chemical conformation, and redirecting electrical pulses through over 200,000 channels in any of its many synaptic connections. Because of this large difference in the possible settings for any one neuron, compared to the binary limitations of conventional computers, the space limitations are far fewer. == Background == The concept of wetware is distinct and unconventional and draws slight resonance with both hardware and software from conventional computers. While hardware is understood as the physical architecture of traditional computational devices, comprising integrated circuits and supporting infrastructure, software represents the encoded architecture of storage and instructions. Wetware is a separate concept that uses the formation of organic molecules, mostly complex cellular structures (such as neurons), to create a computational device such as a computer. In wetware, the ideas of hardware and software are intertwined and interdependent. The molecular and chemical composition of the organic or biological structure would represent not only the physical structure of the wetware but also the software, being continually reprogrammed by the discrete shifts in electrical pulses and chemical concentration gradients as the molecules change their structures to communicate signals. The responsiveness of a cell, proteins, and molecules to changing conformations, both within their structures and around them, ties the idea of internal programming and external structure together in a way that is alien to the current model of conventional computer architecture. The structure of wetware represents a model where the external structure and internal programming are interdependent and unified; meaning that changes to the programming or internal communication between molecules of the device would represent a physical change in the structure. The dynamic nature of wetware borrows from the function of complex cellular structures in biological organisms. The combination of "hardware" and "software" into one dynamic, and interdependent system which uses organic molecules and complexes to create an unconventional model for computational devices is a specific example of applied biorobotics. === The cell as a model of wetware === Cells in many ways can be seen as their form of naturally occurring wetware, similar to the concept that the human brain is the preexisting model system for complex wetware. In his book Wetware: A Computer in Every Living Cell (2009) Dennis Bray explains his theory that cells, which are the most basic form of life, are just a highly complex computational structure, like a computer. To simplify one of his arguments a cell can be seen as a type of computer, using its structured architecture. In this architecture, much like a traditional computer, many smaller components operate in tandem to receive input, process the information, and compute an output. In an overly simplified, non-technical analysis, cellular function can be broken into the following components: Information and instructions for execution are stored as DNA in the cell, RNA acts as a source for distinctly encoded input, processed by ribosomes and other transcription factors to access and process the DNA and to output a protein. Bray's argument in favor of viewing cells and cellular structures as models of natural computational devices is important when considering the more applied theories of wetware to biorobotics. === Biorobotics === Wetware and biorobotics are closely related concepts, which both borrow from similar overall principles. A biorobotic structure can be defined as a system modeled from a preexisting organic complex or model such as cells (neurons) or more complex structures like organs (brain) or whole organisms. Unlike wetware, the concept of biorobotics is not always a system composed of organic molecules, but instead could be composed of conventional material which is designed and assembled in a structure similar or derived from a biological model. Biorobotics have many applications and are used to address the challenges of conventional computer architecture. Conceptually, designing a program, robot, or computational device after a preexisting biological model such as a cell, or even a whole organism, provides the engineer or programmer the benefits of incorporating into the structure the evolutionary advantages of the model. == Effects on users == Wetware technologies such as BCIs and neuromorphic chips offer new possibilities for user autonomy. For those with disabilities, such systems could restore motor or sensory functions and enhance quality of life. However, these technologies raise ethical questions: cognitive privacy, consent over biological data, and risk of exploitation. Without proper oversight, wetware technologies may also widen inequality, favoring those with access to cognitive enhancements. Open governance frameworks and ethical AI design grounded in neuro ethics will be essential. With the development of wetware devices, disparities in access could exacerbate social inequalities, benefiting those who have resources to enhance cognitive or physical abilities. It is necessary to create strong ethical frameworks, inclusive development practices, and open systems of governance to reduce risks and make sure that wetware advances are beneficial to all segments of society. == Applications and goals == === Basic neurocomputer composed of leech neurons === In 1999 William Ditto and his team of researchers at Georgia Institute of Technology and Emory University created a basic form of a wetware computer capable of simple addition by harnessing leech neurons. Leeches were used as a model organism due to the large size of their neuron, and the ease associated with their collection and manipulation. However, these results have never been published in a peer-reviewed journal, prompting questions about the validity of the claims. The computer was able to complete basic addition through electrical probes
Read more →
Personality computing

Personality computing is a research field related to artificial intelligence and personality psychology that studies personality by means of computational techniques from different sources, including text, multimedia, and social networks. == Overview == Personality computing addresses three main problems involving personality: automatic personality recognition, perception, and synthesis. Automatic personality recognition is the inference of the personality type of target individuals from their digital footprint. Automatic personality perception is the inference of the personality attributed by an observer to a target individual based on some observable behavior. Automatic personality synthesis is the generation of the style or behaviour of artificial personalities in Avatars and virtual agents. Self-assessed personality tests or observer ratings are always exploited as the ground truth for testing and validating the performance of artificial intelligence algorithms for the automatic prediction of personality types. There is a wide variety of personality tests, such as the Myers Briggs Type Indicator (MBTI) or the MMPI, but the most used are tests based on the Five Factor Model such as the Revised NEO Personality Inventory. Personality computing can be considered as an extension or complement of Affective computing, where the former focuses on personality traits and the latter on affective states. A further extension of the two fields is Character Computing which combines various character states and traits including but not limited to personality and affect. == History == Personality computing began around 2005 with the pioneering research in personality recognition by Shlomo Argamon and later by François Mairesse. These works showed that personality traits could be inferred with reasonable accuracy from text, such as blogs, self-presentations, and email addresses. In 2008, the concept of "portable personality" for the distributed management of personality profiles has been developed. A few years later, research began in personality recognition and perception from multimodal and social signals, such as recorded meetings and voice calls. In the 2010s, the research focused mainly on personality recognition and perception from social media, helped by the first workshops organized by Fabio Celli. In particular personality was extracted from Facebook, Twitter and Instagram. In the same years, automatic personality synthesis helped improve the coherence of simulated behavior in virtual agents. Scientific works by Michal Kosinski demonstrated the validity of Personality Computing from different digital footprints, in particular from user preferences such as Facebook page likes, showed that machines can recognize personality better than humans and raised a warning against Cambridge Analytica and misuse of this kind of technology. == Applications == Personality computing techniques, in particular personality recognition and perception, have applications in Social media marketing, where they can help reducing the cost of advertising campaigns through psychological targeting.
Read more →
SeaTable

SeaTable is a no-code platform that allows users to develop and implement business processes. The cloud collaboration service SeaTable is marketed by the GmbH of the same name with headquarters in Mainz and additional offices in Berlin and Beijing, and developed by the same company as Seafile. == History == SeaTable is a collaborative database and low-code application platform developed as part of a joint venture between Seafile Ltd., a software company based in Guangzhou, China, and SeaTable GmbH, a German firm headquartered in Mainz. Founded in 2020, the project represents the international expansion of Seafile, a Chinese developer originally known for its file synchronization and sharing software. While SeaTable's cloud services and European client operations are managed by the German entity, the platform itself is developed in China by Seafile's engineering team. This cross-border structure, described by TechCrunch as an “unconventional path” for a Chinese startup expanding abroad, reflects Seafile's effort to maintain its product development in China while addressing growing scrutiny in Western markets over data governance and corporate control. In 2021, an innovation project led by the Cyber Innovation Hub at the IT School of the German Armed Forces started to evaluate the possibilities of a large-scale deployment at the German Armed Forces. The evaluation project is currently still ongoing. In 2022, SeaTable is optimizing its database backend to allow millions of records within one base in the future. The focus of development is increasingly on automation and visualization. In 2025, SeaTable introduced AI-powered automations with version 6. The update enabled the integration of large language models (LLMs) for text analysis and automated decision-making. SeaTable operates a self-hosted LLM on servers provided by Hetzner (Germany), while self-hosted deployments can connect to any compatible model. == Features == SeaTable combines the traditional capabilities of a spreadsheet such as Excel and supplements them with a wide range of functions for process automation and visualization as well as a fully comprehensive API. SeaTable is not a pure cloud solution, but can alternatively be installed on a private server and operated completely autonomously. In this way, the owner retains full control over their own data. The installation is done via Docker on a Linux server. == Security and privacy == While most no-code platforms exist only as SaaS solutions, SeaTable describes itself as a data-sparse European solution. While initially the SeaTable Cloud was hosted on Amazon AWS, the move to the German data centers of Swiss provider Exoscale then took place in May 2021. This was followed by the replacement of the Freshdesk cloud ticketing system with a self-hosted Zammad instance, and since April 2022 SeaTable has completely dispensed with all tracking cookies on its website.
Read more →
Expectation propagation

Expectation propagation (EP) is a technique in Bayesian machine learning. EP finds approximations to a probability distribution. It uses an iterative approach that uses the factorization structure of the target distribution. It differs from other Bayesian approximation approaches such as variational Bayesian methods. More specifically, suppose we wish to approximate an intractable probability distribution p ( x ) {\displaystyle p(\mathbf {x} )} with a tractable distribution q ( x ) {\displaystyle q(\mathbf {x} )} . Expectation propagation achieves this approximation by minimizing the Kullback–Leibler divergence K L ( p | | q ) {\displaystyle \mathrm {KL} (p||q)} . Variational Bayesian methods minimize K L ( q | | p ) {\displaystyle \mathrm {KL} (q||p)} instead. If q ( x ) {\displaystyle q(\mathbf {x} )} is a Gaussian N ( x | μ , Σ ) {\displaystyle {\mathcal {N}}(\mathbf {x} |\mu ,\Sigma )} , then K L ( p | | q ) {\displaystyle \mathrm {KL} (p||q)} is minimized with μ {\displaystyle \mu } and Σ {\displaystyle \Sigma } being equal to the mean of p ( x ) {\displaystyle p(\mathbf {x} )} and the covariance of p ( x ) {\displaystyle p(\mathbf {x} )} , respectively; this is called moment matching. == Applications == Expectation propagation via moment matching plays a vital role in approximation for indicator functions that appear when deriving the message passing equations for TrueSkill.
Read more →
Competition in artificial intelligence

Competition in artificial intelligence refers to the rivalry among companies, research institutions, and governments to develop and deploy the most capable artificial intelligence (AI) systems. The competition spans multiple domains, including large language models (LLMs), autonomous vehicles, robotics, computer vision systems, natural language processing (NLP), and AI-optimized hardware. == Background == Competition in AI is driven by potential economic, strategic, and scientific advantages. Breakthroughs in AI can enhance productivity, enable new products and services, and provide geopolitical leverage. The field has experienced rapid progress since the mid-2010s, particularly in machine learning and artificial neural networks, leading to intense rivalry among leading actors. == Corporate competition == Major technology companies are among the most visible competitors in AI. In the United States, firms such as OpenAI, Google DeepMind, Meta Platforms, Microsoft, Anthropic, and Nvidia compete in building advanced LLMs, generative AI platforms, and AI-optimized graphics processing units (GPUs). In China, companies such as Baidu, Alibaba Group, Tencent, and startups such DeepSeek have become leaders in AI deployment, often with state backing. The "[war for talent]" in AI research has become a defining feature of corporate competition. Leading firms often recruit top AI researchers from rivals, sometimes offering multi-million-dollar compensation packages. == National competition == Governments see leadership in AI as a strategic priority. The United States has funded AI research for military, economic, and societal applications, while China has set a target to lead the world in AI by 2030 through its "New Generation Artificial Intelligence Development Plan". Other nations, including the UK, India, Israel, Russia, South Korea, and members of the European Union, have launched national AI strategies. In February 2026 Anthropic said Chinese companies - DeepSeek, Moonshot AI, and MiniMax - were conducting "distillation attacks" in an attempt to copy their model's capabilities, and warned that business wars were closely tied to geopolitical ones: "foreign labs that illicitly distill American models can remove safeguards, feeding model capabilities into their own military, intelligence, and surveillance systems." == Sectors of competition == === Large language models and chatbots competition === Competition to produce the most capable generative text models, with benchmarks such as MMLU and ARC used to evaluate performance has been on scale since the emergence of AI. These systems leverage deep learning, especially transformer architectures, to understand and generate human-like language. Companies and research groups globally compete to develop chatbots that are more capable, reliable, and context-aware. Among the most well-known chatbots is ChatGPT, developed by OpenAI. Since its public release in 2022, ChatGPT has rapidly gained widespread attention for its ability to engage in coherent and versatile conversations, assist with creative writing, and solve complex problems. In response, technology firms introduced competing chatbots aiming to challenge or surpass ChatGPT's capabilities. Notably, DeepSeek, a Chinese AI company, launched an advanced chatbot integrated with their R1 language model, emphasizing strong natural language understanding and multilingual support. Similarly, Grok, developed by xAI (company), integrates conversational AI into vehicles and digital assistants, combining natural language processing with real-time data for personalized user interaction. These chatbots not only compete in language tasks but also demonstrate strategic reasoning capabilities by playing complex games such as chess and Go. This form of competition is reminiscent of historic AI milestones set by programs such as Deep Blue and AlphaGo. The OpenAI’s ChatGPT has been tested in playing chess at various levels, while DeepSeek’s chatbot showcased its prowess in online chess tournaments in early 2024, winning several matches against human and AI opponents. Grok, leveraging Tesla's vast data infrastructure, has demonstrated real-time strategic decision-making in simulation environments that include chess-like games. The competition pushes rapid innovation, with firms racing to improve chatbot conversational depth, reduce biases, increase factual accuracy, and integrate multimodal inputs like images and videos. At the same time, the competition raises questions about AI safety, ethical use, and the societal impacts of increasingly human-like chatbots. === Autonomous vehicles === Companies such as Waymo, Tesla, and Baidu are racing to deploy safe and reliable self-driving car technology. === AI chips === Rivalry between Nvidia, AMD, Intel, and Huawei in designing processors optimized for AI workloads. === Military applications === Development of AI-enabled drones, surveillance systems, and decision-support tools, with associated ethical debates. == Events == In 2023, OpenAI released GPT-4, prompting competitors such as Google DeepMind to accelerate the release of their own models, including Gemini. In 2024, Chinese AI company DeepSeek launched the R1 model, leading OpenAI to release an open-source system, GPT-OSS, as a strategic countermeasure. In 2022, Tesla and Waymo both expanded autonomous taxi services in U.S. cities, competing for regulatory approval and public trust. The U.S. Department of Defense's Project Maven and China's AI-enabled surveillance programs have been cited as examples of military AI rivalry. In 2025, Microsoft hired several senior engineers from Google DeepMind, highlighting the ongoing "talent poaching" competition in the AI sector. == Risks and concerns == Critics warn that unrestrained competition in AI can undermine safety, ethics, and governance. Concerns include the proliferation of biased or unsafe models, escalation in autonomous weapons, and reduced cooperation on safety standards.
Read more →
Computational heuristic intelligence

Computational heuristic intelligence (CHI) refers to specialized programming techniques in computational intelligence (also called artificial intelligence, or AI). These techniques have the express goal of avoiding complexity issues, also called NP-hard problems, by using human-like techniques. They are best summarized as the use of exemplar-based methods (heuristics), rather than rule-based methods (algorithms). Hence the term is distinct from the more conventional computational algorithmic intelligence, or symbolic AI. An example of a CHI technique is the encoding specificity principle of Tulving and Thompson. In general, CHI principles are problem solving techniques used by people, rather than programmed into machines. It is by drawing attention to this key distinction that the use of this term is justified in a field already replete with confusing neologisms. Note that the legal systems of all modern human societies employ both heuristics (generalisations of cases) from individual trial records as well as legislated statutes (rules) as regulatory guides. Another recent approach to the avoidance of complexity issues is to employ feedback control rather than feedforward modeling as a problem-solving paradigm. This approach has been called computational cybernetics, because (a) the term 'computational' is associated with conventional computer programming techniques which represent a strategic, compiled, or feedforward model of the problem, and (b) the term 'cybernetic' is associated with conventional system operation techniques which represent a tactical, interpreted, or feedback model of the problem. Of course, real programs and real problems both contain both feedforward and feedback components. A real example which illustrates this point is that of human cognition, which clearly involves both perceptual (bottom-up, feedback, sensor-oriented) and conceptual (top-down, feedforward, motor-oriented) information flows and hierarchies. The AI engineer must choose between mathematical and cybernetic problem solution and machine design paradigms. This is not a coding (program language) issue, but relates to understanding the relationship between the declarative and procedural programming paradigms. The vast majority of STEM professionals never get the opportunity to design or implement pure cybernetic solutions. When pushed, most responders will dismiss the importance of any difference by saying that all code can be reduced to a mathematical model anyway. Unfortunately, not only is this belief false, it fails most spectacularly in many AI scenarios. Mathematical models are not time agnostic, but by their very nature are pre-computed, i.e. feedforward. Dyer [2012] and Feldman [2004] have independently investigated the simplest of all somatic governance paradigms, namely control of a simple jointed limb by a single flexor muscle. They found that it is impossible to determine forces from limb positions- therefore, the problem cannot have a pre-computed (feedforward) mathematical solution. Instead, a top-down command bias signal changes the threshold feedback level in the sensorimotor loop, e.g. the loop formed by the afferent and efferent nerves, thus changing the so-called ‘equilibrium point’ of the flexor muscle/ elbow joint system. An overview of the arrangement reveals that global postures and limb position are commanded in feedforward terms, using global displacements (common coding), with the forces needed being computed locally by feedback loops. This method of sensorimotor unit governance, which is based upon what Anatol Feldman calls the ‘equilibrium Point’ theory, is formally equivalent to a servomechanism such as a car's ‘cruise control’.
Read more →
JDoodle

JDoodle is a cloud-based online integrated development environment and compiler platform that supports execution of source code in 70+ programming languages including Java, Python, C/C++, PHP, Ruby, Perl, HTML, and more. It provides zero‑setup code for compilation, execution, and sharing via a web browser interface. == Features == Provides real‑time collaboration and code embedding via shareable URLs and APIs Offers an integrated terminal interface supporting database engines such as MySQL and MongoDB. JDroid — AI‑assistant to generate code snippets, optimize code, and assist debugging. == Languages and frameworks supported ==
Read more →
Enterprise cognitive system

Enterprise cognitive systems (ECS) are part of a broader shift in computing, from a programmatic to a probabilistic approach, called cognitive computing. An Enterprise Cognitive System makes a new class of complex decision support problems computable, where the business context is ambiguous, multi-faceted, and fast-evolving, and what to do in such a situation is usually assessed today by the business user. An ECS is designed to synthesize a business context and link it to the desired outcome. It recommends evidence-based actions to help the end-user achieve the desired outcome. It does so by finding past situations similar to the current situation, and extracting the repeated actions that best influence the desired outcome. While general-purpose cognitive systems can be used for different outputs, prescriptive, suggestive, instructive, or simply entertaining, an enterprise cognitive system is focused on action, not insight, to help in assessing what to do in a complex situation. == Key characteristics == ECS have to be: Adaptive: They must learn as information changes, and as goals and requirements evolve. They must resolve ambiguity and tolerate unpredictability. They must be engineered to feed on dynamic data in real time, or near real time. In the Enterprise, near-real time learning from data requires an agile information federation approach to ingest incremental data updates as they occur, and an unsupervised learning approach to ensure that new best practice is leveraged across the organization in a timely manner. Interactive: They must interact easily with users so that those users can define their needs comfortably. They may also interact with other processors, devices, and Cloud services, as well as with people. In the Enterprise, interactions are controlled via existing workflows and UIs. Therefore, embedding best practices directly into these existing interfaces, in the context of a specific step, is critical to ensure maximum end-user adoption. Iterative and stateful: They must aid in defining a problem by asking questions or finding additional source input if a problem statement is ambiguous or incomplete. They must “remember” previous interactions in a process and return information that is suitable for the specific application at that point in time. In the Enterprise, business context is often structured by a business process, and therefore sufficiently data-rich to make relevant recommendations without significant iterations from the end-user. A stateful memory of overall interactions across communication channels is critical for understanding of context, as a static profile will not capture intent and outcome potential the way behavior does. Contextual: They must understand, identify, and extract contextual elements such as meaning, syntax, time, location, appropriate domain, regulations, user's profile, process, task and goal. They may draw on multiple sources of information, including both structured and unstructured digital information, as well as sensory inputs (visual, gestural, auditory, or sensor-provided). In the Enterprise, Context is fragmented and must be aggregated across data types, sources, and locations. In most business environments, such data is captured in existing enterprise information systems, and the effort is linked to quickly source and unify such information. It is rare to have to directly process sensor, audio or visual data in real-time as direct input into the enterprise cognitive system. Instead, these data types are captured by Enterprise Applications and pre-processed into a binary or text format prior to consumption by the System. == Business applications powered by an ECS == Bottlenose – trends and brands monitoring Cybereason – security threat monitoring Dataminr – social media monitoring
Read more →
Pattern theory

Pattern theory, formulated by Ulf Grenander, is a mathematical formalism to describe knowledge of the world as patterns. It differs from other approaches to artificial intelligence in that it does not begin by prescribing algorithms and machinery to recognize and classify patterns; rather, it prescribes a vocabulary to articulate and recast the pattern concepts in precise language. Broad in its mathematical coverage, Pattern Theory spans algebra and statistics, as well as local topological and global entropic properties. In addition to the new algebraic vocabulary, its statistical approach is novel in its aim to: Identify the hidden variables of a data set using real world data rather than artificial stimuli, which was previously commonplace. Formulate prior distributions for hidden variables and models for the observed variables that form the vertices of a Gibbs-like graph. Study the randomness and variability of these graphs. Create the basic classes of stochastic models applied by listing the deformations of the patterns. Synthesize (sample) from the models, not just analyze signals with them. The Brown University Pattern Theory Group was formed in 1972 by Ulf Grenander. Many mathematicians are currently working in this group, noteworthy among them being the Fields Medalist David Mumford. Mumford regards Grenander as his "guru" in Pattern Theory.
Read more →