AI Generator Xi Pics

AI Generator Xi Pics — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Predictive text

Predictive text is an input technology used where one key or button represents many letters, such as on the physical numeric keypads of mobile phones and in accessibility technologies. Each key press results in a prediction rather than repeatedly sequencing through the same group of "letters" it represents, in the same, invariable order. Predictive text could allow for an entire word to be input by a single keypress. Predictive text makes efficient use of fewer device keys to input writing into a text message, an e-mail, an address book, a calendar, and the like. The most widely used, general, predictive text systems are T9, iTap, eZiText, and LetterWise/WordWise. There are many ways to build a device that predicts text, but all predictive text systems have initial linguistic settings that offer predictions that are re-prioritized to adapt to each user. This learning adapts, by way of the device memory, to a user's disambiguating feedback that results in corrective key presses, such as pressing a "next" key to get to the intention. Most predictive text systems have a user database to facilitate this process. Theoretically the number of keystrokes required per desired character in the finished writing is, on average, comparable to using a keyboard. This is approximately true provided that all words used are in its database, punctuation is ignored, and no input mistakes are made when typing or spelling. The theoretical keystrokes per character, KSPC, of a keyboard is KSPC=1.00, and of multi-tap is KSPC=2.03. Eatoni's LetterWise is a predictive multi-tap hybrid, which when operating on a standard telephone keypad achieves KSPC=1.15 for English. The choice of which predictive text system is the best to use involves matching the user's preferred interface style, the user's level of learned ability to operate predictive text software, and the user's efficiency goal. There are various levels of risk in predictive text systems, versus multi-tap systems, because the predicted text that is automatically written provides the speed and mechanical efficiency benefit, which, if the user is not careful to review, results in transmitting misinformation. Predictive text systems take time to learn to use well, and so generally, a device's system has user options to set up the choice of multi-tap or any one of several schools of predictive text methods. == Background == Short message service (SMS) permits a mobile phone user to send text messages (also called messages, SMSes, texts, and txts) as a short message. The most common system of SMS text input is referred to as "multi-tap". Using multi-tap, a key is pressed multiple times to access the list of letters on that key. For instance, pressing the "2" key once displays an "a", twice displays a "b" and three times displays a "c". To enter two successive letters that are on the same key, the user must either pause or hit a "next" button. A user can type by pressing an alphanumeric keypad without looking at the electronic equipment display. Thus, multi-tap is easy to understand and can be used without any visual feedback. However, multi-tap is not very efficient, requiring potentially many keystrokes to enter a single letter. In ideal predictive text entry, all words used are in the dictionary, punctuation is ignored, no spelling mistakes are made, and no typing mistakes are made. The ideal dictionary would include all slang, proper nouns, abbreviations, URLs, foreign-language words and other user-unique words. This ideal circumstance gives predictive text software a reduction in the number of key strokes a user is required to enter a word. The user presses the number corresponding to each letter. As long as the word exists in the predictive text dictionary or is correctly disambiguated by non-dictionary systems, it will appear. For instance, pressing "4663" will typically be interpreted as the word good, provided that a linguistic database in English is currently in use, though alternatives such as home, hood and hoof are also valid interpretations of the sequence of key strokes. The most widely used systems of predictive text are Tegic's T9, Motorola's iTap, and the Eatoni Ergonomics' LetterWise and WordWise. T9 and iTap use dictionaries, but Eatoni Ergonomics' products use a disambiguation process, a set of statistical rules to recreate words from keystroke sequences. All predictive text systems require a linguistic database for every supported input language. == Dictionary vs. non-dictionary systems == Traditional disambiguation works by referencing a dictionary of commonly used words, though Eatoni offers a dictionaryless disambiguation system. In dictionary-based systems, as the user presses the number buttons, an algorithm searches the dictionary for a list of possible words that match the keypress combination and offers up the most probable choice. The user can then confirm the selection and move on, or use a key to cycle through the possible combinations. A non-dictionary system constructs words and other sequences of letters from the statistics of word parts. To attempt predictions of the intended result of keystrokes not yet entered, disambiguation may be combined with a word completion facility. Either system (disambiguation or predictive) may include a user database, which can be further classified as a "learning" system when words or phrases are entered into the user database without direct user intervention. The user database is for storing words or phrases that are not well disambiguated by the pre-supplied database. Some disambiguation systems further attempt to correct spelling, format text or perform other automatic rewrites, with the risky effect of either enhancing or frustrating user efforts to enter text. == History == The predictive text and autocomplete technology was invented out of necessities by Chinese scientists and linguists in the 1950s to solve the input inefficiency of the Chinese typewriter, as the typing process involved finding and selecting thousands of logographic characters on a tray, drastically slowing down the word processing speed. The actuating keys of the Chinese typewriter created by Lin Yutang in the 1940s included suggestions for the characters following the one selected. In 1951, the Chinese typesetter Zhang Jiying arranged Chinese characters in associative clusters, a precursor of modern predictive text entry, and broke speed records by doing so. Predictive entry of text from a telephone keypad has been known at least since the 1970s (Smith and Goodwin, 1971). Predictive text was mainly used to look up names in directories over the phone until mobile phone text messaging came into widespread use. == Example == On a typical phone keypad, if users wished to type the in a "multi-tap" keypad entry system, they would need to: Press 8 (tuv) once to select t. Press 4 (ghi) twice to select h. Press 3 (def) twice to select e. Meanwhile, in a phone with predictive text, they need only: Press 8 once to select the (tuv) group for the first character. Press 4 once to select the (ghi) group for the second character. Press 3 once to select the (def) group for the third character. The system updates the display as each keypress is entered, to show the most probable entry. In this example, prediction reduced the number of button presses from five to three. The effect is even greater with longer words and those composed of letters later in each key's sequence. A dictionary-based predictive system is based on the hope that the desired word is in the dictionary. That hope may be misplaced if the word differs in any way from common usage—in particular, if the word is not spelled or typed correctly, is slang, or is a proper noun. In these cases, some other mechanism must be used to enter the word. Furthermore, the simple dictionary approach fails with agglutinative languages, where a single word does not necessarily represent a single semantic entity. == Companies and products == Predictive text is developed and marketed in a variety of competing products, such as Nuance Communications's T9. Other products include Motorola's iTap; Eatoni Ergonomic's LetterWise (character, rather than word-based prediction); WordWise (word-based prediction without a dictionary); EQ3 (a QWERTY-like layout compatible with regular telephone keypads); Prevalent Devices's Phraze-It; Xrgomics' TenGO (a six-key reduced QWERTY keyboard system); Adaptxt (considers language, context, grammar and semantics); Lightkey (a predictive typing software for Windows); Clevertexting (statistical nature of the language, dictionaryless, dynamic key allocation); and Oizea Type (temporal ambiguity); Intelab's Tauto; WordLogic's Intelligent Input Platform™ (patented, layer-based advanced text prediction, includes multi-language dictionary, spell-check, built-in Web search); Google's Gboard. == Textonyms == Words produced by the same combination of keypresses have been called "textonyms"; also "txtonyms"; or "T9o
Read more →
Influence diagram

An influence diagram (ID) (also called a relevance diagram, decision diagram or a decision network) is a compact graphical and mathematical representation of a decision situation. It is a generalization of a Bayesian network, in which not only probabilistic inference problems but also decision making problems (following the maximum expected utility criterion) can be modeled and solved. ID was first developed in the mid-1970s by decision analysts with an intuitive semantic that is easy to understand. It is now adopted widely and becoming an alternative to the decision tree which typically suffers from exponential growth in number of branches with each variable modeled. ID is directly applicable in team decision analysis, since it allows incomplete sharing of information among team members to be modeled and solved explicitly. Extensions of ID also find their use in game theory as an alternative representation of the game tree. == Semantics == An ID is a directed acyclic graph with three types (plus one subtype) of node and three types of arc (or arrow) between nodes. Nodes: Decision node (corresponding to each decision to be made) is drawn as a rectangle. Uncertainty node (corresponding to each uncertainty to be modeled) is drawn as an oval. Deterministic node (corresponding to special kind of uncertainty that its outcome is deterministically known whenever the outcome of some other uncertainties are also known) is drawn as a double oval. Value node (corresponding to each component of additively separable Von Neumann-Morgenstern utility function) is drawn as an octagon (or diamond). Arcs: Functional arcs (ending in value node) indicate that one of the components of additively separable utility function is a function of all the nodes at their tails. Conditional arcs (ending in uncertainty node) indicate that the uncertainty at their heads is probabilistically conditioned on all the nodes at their tails. Conditional arcs (ending in deterministic node) indicate that the uncertainty at their heads is deterministically conditioned on all the nodes at their tails. Informational arcs (ending in decision node) indicate that the decision at their heads is made with the outcome of all the nodes at their tails known beforehand. Given a properly structured ID: Decision nodes and incoming information arcs collectively state the alternatives (what can be done when the outcome of certain decisions and/or uncertainties are known beforehand) Uncertainty/deterministic nodes and incoming conditional arcs collectively model the information (what are known and their probabilistic/deterministic relationships) Value nodes and incoming functional arcs collectively quantify the preference (how things are preferred over one another). Alternative, information, and preference are termed decision basis in decision analysis, they represent three required components of any valid decision situation. Formally, the semantic of influence diagram is based on sequential construction of nodes and arcs, which implies a specification of all conditional independencies in the diagram. The specification is defined by the d {\displaystyle d} -separation criterion of Bayesian network. According to this semantic, every node is probabilistically independent on its non-successor nodes given the outcome of its immediate predecessor nodes. Likewise, a missing arc between non-value node X {\displaystyle X} and non-value node Y {\displaystyle Y} implies that there exists a set of non-value nodes Z {\displaystyle Z} , e.g., the parents of Y {\displaystyle Y} , that renders Y {\displaystyle Y} independent of X {\displaystyle X} given the outcome of the nodes in Z {\displaystyle Z} . == Example == Consider the simple influence diagram representing a situation where a decision-maker is planning their vacation. There is 1 decision node (Vacation Activity), 2 uncertainty nodes (Weather Condition, Weather Forecast), and 1 value node (Satisfaction). There are 2 functional arcs (ending in Satisfaction), 1 conditional arc (ending in Weather Forecast), and 1 informational arc (ending in Vacation Activity). Functional arcs ending in Satisfaction indicate that Satisfaction is a utility function of Weather Condition and Vacation Activity. In other words, their satisfaction can be quantified if they know what the weather is like and what their choice of activity is. (Note that they do not value Weather Forecast directly) Conditional arc ending in Weather Forecast indicates their belief that Weather Forecast and Weather Condition can be dependent. Informational arc ending in Vacation Activity indicates that they will only know Weather Forecast, not Weather Condition, when making their choice. In other words, actual weather will be known after they make their choice, and only forecast is what they can count on at this stage. It also follows semantically, for example, that Vacation Activity is independent on (irrelevant to) Weather Condition given Weather Forecast is known. == Applicability to value of information == The above example highlights the power of the influence diagram in representing an extremely important concept in decision analysis known as the value of information. Consider the following three scenarios; Scenario 1: The decision-maker could make their Vacation Activity decision while knowing what Weather Condition will be like. This corresponds to adding extra informational arc from Weather Condition to Vacation Activity in the above influence diagram. Scenario 2: The original influence diagram as shown above. Scenario 3: The decision-maker makes their decision without even knowing the Weather Forecast. This corresponds to removing informational arc from Weather Forecast to Vacation Activity in the above influence diagram. Scenario 1 is the best possible scenario for this decision situation since there is no longer any uncertainty on what they care about (Weather Condition) when making their decision. Scenario 3, however, is the worst possible scenario for this decision situation since they need to make their decision without any hint (Weather Forecast) on what they care about (Weather Condition) will turn out to be. The decision-maker is usually better off (definitely no worse off, on average) to move from scenario 3 to scenario 2 through the acquisition of new information. The most they should be willing to pay for such move is called the value of information on Weather Forecast, which is essentially the value of imperfect information on Weather Condition. The applicability of this simple ID and the value of information concept is tremendous, especially in medical decision making when most decisions have to be made with imperfect information about their patients, diseases, etc. == Related concepts == Influence diagrams are hierarchical and can be defined either in terms of their structure or in greater detail in terms of the functional and numerical relation between diagram elements. An ID that is consistently defined at all levels—structure, function, and number—is a well-defined mathematical representation and is referred to as a well-formed influence diagram (WFID). WFIDs can be evaluated using reversal and removal operations to yield answers to a large class of probabilistic, inferential, and decision questions. More recent techniques have been developed by artificial intelligence researchers concerning Bayesian network inference (belief propagation). An influence diagram having only uncertainty nodes (i.e., a Bayesian network) is also called a relevance diagram. An arc connecting node A to B implies not only that "A is relevant to B", but also that "B is relevant to A" (i.e., relevance is a symmetric relationship).
Read more →
Deterministic blockmodeling

Deterministic blockmodeling is an approach in blockmodeling that does not assume a probabilistic model, and instead relies on the exact or approximate algorithms, which are used to find blockmodel(s). This approach typically minimizes some inconsistency that can occur with the ideal block structure. Such analysis is focused on clustering (grouping) of the network (or adjacency matrix) that is obtained with minimizing an objective function, which measures discrepancy from the ideal block structure. However, some indirect approaches (or methods between direct and indirect approaches, such as CONCOR) do not explicitly minimize inconsistencies or optimize some criterion function. This approach was popularized in the 1970s, due to the presence of two computer packages (CONCOR and STRUCTURE) that were used to "find a permutation of the rows and columns in the adjacency matrix leading to an approximate block structure". The opposite approach to deterministic blockmodeling is a stochastic blockmodeling approach.
Read more →
Synaptic transistor

A synaptic transistor is an electrical device that can learn in ways similar to a neural synapse. It optimizes its own properties for the functions it has carried out in the past. The device mimics the behavior of the property of neurons called spike-timing-dependent plasticity, or STDP. == Structure == Its structure is similar to that of a field effect transistor, where an ionic liquid takes the place of the gate insulating layer between the gate electrode and the conducting channel. That channel is composed of samarium nickelate (SmNiO3, or SNO) rather than the field effect transistor's doped silicon. == Function == A synaptic transistor has a traditional immediate response whose amount of current that passes between the source and drain contacts varies with voltage applied to the gate electrode. It also produces a much slower learned response such that the conductivity of the SNO layer varies in response to the transistor's STDP history, essentially by shuttling oxygen ions between the SNO and the ionic liquid. The analog of strengthening a synapse is to increase the SNO's conductivity, which essentially increases gain. Similarly, weakening a synapse is analogous to decreasing the SNO's conductivity, lowering the gain. The input and output of the synaptic transistor are continuous analog values, rather than digital on-off signals. While the physical structure of the device has the potential to learn from history, it contains no way to bias the transistor to control the memory effect. An external supervisory circuit converts the time delay between input and output into a voltage applied to the ionic liquid that either drives ions into the SNO or removes them. A network of such devices can learn particular responses to "sensory inputs", with those responses being learned through experience rather than explicitly programmed.
Read more →
Moral outsourcing

Moral outsourcing is the placing of responsibility for ethical decision-making onto external entities, often algorithms. The term is often used in discussions of computer science and algorithmic fairness, but it can apply to any situation in which one appeals to outside agents in order to absolve themselves of responsibility for their actions. In this context, moral outsourcing specifically refers to the tendency of society to blame technology, rather than its creators or users, for any harm it may cause. == Definition == The term "moral outsourcing" was first coined by Dr. Rumman Chowdhury, a data scientist concerned with the overlap between artificial intelligence and social issues. Chowdhury used the term to describe looming fears of a so-called “Fourth Industrial Revolution” following the rise of artificial intelligence. Moral outsourcing is often applied by technologists to shrink away from their part in building offensive products. In her TED Talk, Chowdhury gives the example of a creator excusing their work by saying they were simply doing their job. This is a case of moral outsourcing and not taking ownership for the consequences of creation. When it comes to AI, moral outsourcing allows for creators to decide when the machine is human and when it is a computer - shifting the blame and responsibility of moral plights off of the technologists and onto the technology. Conversations around AI and bias and its impacts require accountability to bring change. It is difficult to address these biased systems if their creators use moral outsourcing to avoid taking any responsibility for the issue. One example of moral outsourcing is the anger that is directed at machines for “taking jobs away from humans” rather than companies for employing that technology and jeopardizing jobs in the first place. The term "moral outsourcing" refers to the concept of outsourcing, or enlisting an external operation to complete specific work for another organization. In the case of moral outsourcing, the work of resolving moral dilemmas or making choices according to an ethical code is supposed to be conducted by another entity. == Real-world applications == In the medical field, AI is increasingly involved in decision-making processes about which patients to treat, and how to treat them. The responsibility of the doctor to make informed decisions about what is best for their patients is outsourced to an algorithm. Sympathy is also noted to be an important part of medical practice; an aspect that artificial intelligence, glaringly, is missing. This form of moral outsourcing is a major concern in the medical community. Another field of technology in which moral outsourcing is frequently brought up is autonomous vehicles. California Polytechnic State University professor Keith Abney proposed an example scenario: "Suppose we have some [troublemaking] teenagers, and they see an autonomous vehicle, they drive right at it. They know the autonomous vehicle will swerve off the road and go off a cliff, but should it?" The decision of whether to sacrifice the autonomous vehicle (and any passengers inside) or the vehicle coming at it will be written into the algorithms defining the car's behavior. In the case of moral outsourcing, the responsibility of any damage caused by an accident may be attributed to the autonomous vehicle itself, rather than the creators who wrote the protocol the vehicle will use to "decide" what to do. Moral outsourcing is also used to delegate the consequences of predictive policing algorithms to technology, rather than the creators or the police. There are many ethical concerns with predictive policing due to the fact that it results in the over-policing of low income and minority communities. In the context of moral outsourcing, the positive feedback loop of sending disproportionate police forces into minority communities is attributed to the algorithm and the data being fed into this system--rather than the users and creators of the predictive policing technology. == Outside of technology == === Religion === Moral outsourcing is also commonly seen in appeals to religion to justify discrimination or harm. In his book What It Means to be Moral, sociologist Phil Zuckerman contradicts the popular religious notion that morality comes from God. Religion is oftentimes cited as a foundation for a moral stance without any tangible relation between the religious beliefs and personal stance. In these cases, religious individuals will "outsource" their personal beliefs and opinions by claiming that they are a result of their religious identification. This is seen where religion is cited as a factor for political beliefs, medical beliefs, and in extreme cases an excuse for violence. === Manufacturing === Moral outsourcing can also be seen in the business world in terms of manufacturing goods and avoiding environmental responsibility. Some companies in the United States will move their production process to foreign countries with more relaxed environmental policies to avoid the pollution laws that exist in the US. A study by the Harvard Business Review found that "in countries with tight environmental regulation, companies have 29% lower domestic emissions on average. On the other hand, such a tightening in regulation results in 43% higher emissions abroad." The consequences of higher pollution rates are then attributed to the loose regulations in these countries, rather than on the companies themselves who purposefully moved into these areas to avoid strict pollution policy.
Read more →
Locality-sensitive hashing

In computer science, locality-sensitive hashing (LSH) is a fuzzy hashing technique that hashes similar input items into the same "buckets" with high probability. The number of buckets is much smaller than the universe of possible input items. Since similar items end up in the same buckets, this technique can be used for data clustering and nearest neighbor search. It differs from conventional hashing techniques in that hash collisions are maximized, not minimized. Alternatively, the technique can be seen as a way to reduce the dimensionality of high-dimensional data; high-dimensional input items can be reduced to low-dimensional versions while preserving relative distances between items. Hashing-based approximate nearest-neighbor search algorithms generally use one of two main categories of hashing methods: either data-independent methods, such as locality-sensitive hashing (LSH); or data-dependent methods, such as locality-preserving hashing (LPH). Locality-preserving hashing was initially devised as a way to facilitate data pipelining in implementations of massively parallel algorithms that use randomized routing and universal hashing to reduce memory contention and network congestion. == Definitions == A finite family F {\displaystyle {\mathcal {F}}} of functions h : M → S {\displaystyle h\colon M\to S} is defined to be an LSH family for a metric space M = ( M , d ) {\displaystyle {\mathcal {M}}=(M,d)} , a threshold r > 0 {\displaystyle r>0} , an approximation factor c > 1 {\displaystyle c>1} , and probabilities p 1 > p 2 {\displaystyle p_{1}>p_{2}} if it satisfies the following condition. For any two points a , b ∈ M {\displaystyle a,b\in M} and a hash function h {\displaystyle h} chosen uniformly at random from F {\displaystyle {\mathcal {F}}} : If d ( a , b ) ≤ r {\displaystyle d(a,b)\leq r} , then h ( a ) = h ( b ) {\displaystyle h(a)=h(b)} (i.e., a and b collide) with probability at least p 1 {\displaystyle p_{1}} , If d ( a , b ) ≥ c r {\displaystyle d(a,b)\geq cr} , then h ( a ) = h ( b ) {\displaystyle h(a)=h(b)} with probability at most p 2 {\displaystyle p_{2}} . Such a family F {\displaystyle {\mathcal {F}}} is called ( r , c r , p 1 , p 2 ) {\displaystyle (r,cr,p_{1},p_{2})} -sensitive. === LSH with respect to a similarity measure === Alternatively it is possible to define an LSH family on a universe of items U endowed with a similarity function ϕ : U × U → [ 0 , 1 ] {\displaystyle \phi \colon U\times U\to [0,1]} . In this setting, a LSH scheme is a family of hash functions H coupled with a probability distribution D over H such that a function h ∈ H {\displaystyle h\in H} chosen according to D satisfies P r [ h ( a ) = h ( b ) ] = ϕ ( a , b ) {\displaystyle Pr[h(a)=h(b)]=\phi (a,b)} for each a , b ∈ U {\displaystyle a,b\in U} . === Amplification === Given a ( d 1 , d 2 , p 1 , p 2 ) {\displaystyle (d_{1},d_{2},p_{1},p_{2})} -sensitive family F {\displaystyle {\mathcal {F}}} , we can construct new families G {\displaystyle {\mathcal {G}}} by either the AND-construction or OR-construction of F {\displaystyle {\mathcal {F}}} . To create an AND-construction, we define a new family G {\displaystyle {\mathcal {G}}} of hash functions g, where each function g is constructed from k random functions h 1 , … , h k {\displaystyle h_{1},\ldots ,h_{k}} from F {\displaystyle {\mathcal {F}}} . We then say that for a hash function g ∈ G {\displaystyle g\in {\mathcal {G}}} , g ( x ) = g ( y ) {\displaystyle g(x)=g(y)} if and only if all h i ( x ) = h i ( y ) {\displaystyle h_{i}(x)=h_{i}(y)} for i = 1 , 2 , … , k {\displaystyle i=1,2,\ldots ,k} . Since the members of F {\displaystyle {\mathcal {F}}} are independently chosen for any g ∈ G {\displaystyle g\in {\mathcal {G}}} , G {\displaystyle {\mathcal {G}}} is a ( d 1 , d 2 , p 1 k , p 2 k ) {\displaystyle (d_{1},d_{2},p_{1}^{k},p_{2}^{k})} -sensitive family. To create an OR-construction, we define a new family G {\displaystyle {\mathcal {G}}} of hash functions g, where each function g is constructed from k random functions h 1 , … , h k {\displaystyle h_{1},\ldots ,h_{k}} from F {\displaystyle {\mathcal {F}}} . We then say that for a hash function g ∈ G {\displaystyle g\in {\mathcal {G}}} , g ( x ) = g ( y ) {\displaystyle g(x)=g(y)} if and only if h i ( x ) = h i ( y ) {\displaystyle h_{i}(x)=h_{i}(y)} for one or more values of i. Since the members of F {\displaystyle {\mathcal {F}}} are independently chosen for any g ∈ G {\displaystyle g\in {\mathcal {G}}} , G {\displaystyle {\mathcal {G}}} is a ( d 1 , d 2 , 1 − ( 1 − p 1 ) k , 1 − ( 1 − p 2 ) k ) {\displaystyle (d_{1},d_{2},1-(1-p_{1})^{k},1-(1-p_{2})^{k})} -sensitive family. == Applications == LSH has been applied to several problem domains, including: Near-duplicate detection Hierarchical clustering Genome-wide association study Image similarity identification VisualRank Gene expression similarity identification Audio similarity identification Nearest neighbor search Audio fingerprint Digital video fingerprinting Shared memory organization in parallel computing Physical data organization in database management systems Training fully connected neural networks Computer security Machine learning == Methods == === Bit sampling for Hamming distance === One of the easiest ways to construct an LSH family is by bit sampling. This approach works for the Hamming distance over d-dimensional vectors { 0 , 1 } d {\displaystyle \{0,1\}^{d}} . Here, the family F {\displaystyle {\mathcal {F}}} of hash functions is simply the family of all the projections of points on one of the d {\displaystyle d} coordinates, i.e., F = { h : { 0 , 1 } d → { 0 , 1 } ∣ h ( x ) = x i for some i ∈ { 1 , … , d } } {\displaystyle {\mathcal {F}}=\{h\colon \{0,1\}^{d}\to \{0,1\}\mid h(x)=x_{i}{\text{ for some }}i\in \{1,\ldots ,d\}\}} , where x i {\displaystyle x_{i}} is the i {\displaystyle i} th coordinate of x {\displaystyle x} . A random function h {\displaystyle h} from F {\displaystyle {\mathcal {F}}} simply selects a random bit from the input point. This family has the following parameters: P 1 = 1 − R / d {\displaystyle P_{1}=1-R/d} , P 2 = 1 − c R / d {\displaystyle P_{2}=1-cR/d} . That is, any two vectors x , y {\displaystyle x,y} with Hamming distance at most R {\displaystyle R} collide under a random h {\displaystyle h} with probability at least P 1 {\displaystyle P_{1}} . Any x , y {\displaystyle x,y} with Hamming distance at least c R {\displaystyle cR} collide with probability at most P 2 {\displaystyle P_{2}} . === Min-wise independent permutations === Suppose U is composed of subsets of some ground set of enumerable items S and the similarity function of interest is the Jaccard index J. If π is a permutation on the indices of S, for A ⊆ S {\displaystyle A\subseteq S} let h ( A ) = min a ∈ A { π ( a ) } {\displaystyle h(A)=\min _{a\in A}\{\pi (a)\}} . Each possible choice of π defines a single hash function h mapping input sets to elements of S. Define the function family H to be the set of all such functions and let D be the uniform distribution. Given two sets A , B ⊆ S {\displaystyle A,B\subseteq S} the event that h ( A ) = h ( B ) {\displaystyle h(A)=h(B)} corresponds exactly to the event that the minimizer of π over A ∪ B {\displaystyle A\cup B} lies inside A ∩ B {\displaystyle A\cap B} . As h was chosen uniformly at random, P r [ h ( A ) = h ( B ) ] = J ( A , B ) {\displaystyle Pr[h(A)=h(B)]=J(A,B)\,} and ( H , D ) {\displaystyle (H,D)\,} define an LSH scheme for the Jaccard index. Because the symmetric group on n elements has size n!, choosing a truly random permutation from the full symmetric group is infeasible for even moderately sized n. Because of this fact, there has been significant work on finding a family of permutations that is "min-wise independent" — a permutation family for which each element of the domain has equal probability of being the minimum under a randomly chosen π. It has been established that a min-wise independent family of permutations is at least of size lcm ⁡ { 1 , 2 , … , n } ≥ e n − o ( n ) {\displaystyle \operatorname {lcm} \{\,1,2,\ldots ,n\,\}\geq e^{n-o(n)}} , and that this bound is tight. Because min-wise independent families are too big for practical applications, two variant notions of min-wise independence are introduced: restricted min-wise independent permutations families, and approximate min-wise independent families. Restricted min-wise independence is the min-wise independence property restricted to certain sets of cardinality at most k. Approximate min-wise independence differs from the property by at most a fixed ε. === Open source methods === ==== Nilsimsa Hash ==== Nilsimsa is a locality-sensitive hashing algorithm used in anti-spam efforts. The goal of Nilsimsa is to generate a hash digest of an email message such that the digests of two similar messages are similar to each other. The paper suggests that the Nilsimsa satisfies three requirements: The digest identifying each message should not
Read more →
Liquid state machine

A liquid state machine (LSM) is a type of reservoir computer that uses a spiking neural network. An LSM consists of a large collection of units (called nodes, or neurons). Each node receives time varying input from external sources (the inputs) as well as from other nodes. Nodes are randomly connected to each other. The recurrent nature of the connections turns the time varying input into a spatio-temporal pattern of activations in the network nodes. The spatio-temporal patterns of activation are read out by linear discriminant units. The soup of recurrently connected nodes will end up computing a large variety of nonlinear functions on the input. Given a large enough variety of such nonlinear functions, it is theoretically possible to obtain linear combinations (using the read out units) to perform whatever mathematical operation is needed to perform a certain task, such as speech recognition or computer vision. The word liquid in the name comes from the analogy drawn to dropping a stone into a still body of water or other liquid. The falling stone will generate ripples in the liquid. The input (motion of the falling stone) has been converted into a spatio-temporal pattern of liquid displacement (ripples). LSMs have been put forward as a way to explain the operation of brains. LSMs are argued to be an improvement over the theory of artificial neural networks because: Circuits are not hard coded to perform a specific task. Continuous time inputs are handled "naturally". Computations on various time scales can be done using the same network. The same network can perform multiple computations. Criticisms of LSMs as used in computational neuroscience are that LSMs don't actually explain how the brain functions. At best they can replicate some parts of brain functionality. There is no guaranteed way to dissect a working network and figure out how or what computations are being performed. There is very little control over the process. == Universal function approximation == If a reservoir has fading memory and input separability, with help of a readout, it can be proven the liquid state machine is a universal function approximator using Stone–Weierstrass theorem.
Read more →
Markov model

In probability theory, a Markov model is a stochastic model used to model pseudo-randomly changing systems. It is assumed that future states depend only on the current state, not on the events that occurred before it (that is, it assumes the Markov property). Generally, this assumption enables reasoning and computation with the model that would otherwise be intractable. For this reason, in the fields of predictive modelling and probabilistic forecasting, it is desirable for a given model to exhibit the Markov property. == Introduction == Andrey Andreyevich Markov (14 June 1856 – 20 July 1922) was a Russian mathematician best known for his work on stochastic processes. A primary subject of his research later became known as the Markov chain. There are four common Markov models used in different situations, depending on whether every sequential state is observable or not, and whether the system is to be adjusted on the basis of observations made: == Markov chain == The simplest Markov model is the Markov chain. It models the state of a system with a random variable that changes through time. In this context, the Markov property indicates that the distribution for this variable depends only on the distribution of a previous state. An example use of a Markov chain is Markov chain Monte Carlo, which uses the Markov property to prove that a particular method for performing a random walk will sample from the joint distribution. == Hidden Markov model == A hidden Markov model is a Markov chain for which the state is only partially observable or noisily observable. In other words, observations are related to the state of the system, but they are typically insufficient to precisely determine the state. Several well-known algorithms for hidden Markov models exist. For example, given a sequence of observations, the Viterbi algorithm will compute the most-likely corresponding sequence of states, the forward algorithm will compute the probability of the sequence of observations, and the Baum–Welch algorithm will estimate the starting probabilities, the transition function, and the observation function of a hidden Markov model. One common use is for speech recognition, where the observed data is the speech audio waveform and the hidden state is the spoken text. In this example, the Viterbi algorithm finds the most likely sequence of spoken words given the speech audio. == Markov decision process == A Markov decision process is a Markov chain in which state transitions depend on the current state and an action vector that is applied to the system. Typically, a Markov decision process is used to compute a policy of actions that will maximize some utility with respect to expected rewards. == Partially observable Markov decision process == A partially observable Markov decision process (POMDP) is a Markov decision process in which the state of the system is only partially observed. POMDPs are known to be NP complete, but recent approximation techniques have made them useful for a variety of applications, such as controlling simple agents or robots. == Markov random field == A Markov random field, or Markov network, may be considered to be a generalization of a Markov chain in multiple dimensions. In a Markov chain, state depends only on the previous state in time, whereas in a Markov random field, each state depends on its neighbors in any of multiple directions. A Markov random field may be visualized as a field or graph of random variables, where the distribution of each random variable depends on the neighboring variables with which it is connected. More specifically, the joint distribution for any random variable in the graph can be computed as the product of the "clique potentials" of all the cliques in the graph that contain that random variable. Modeling a problem as a Markov random field is useful because it implies that the joint distributions at each vertex in the graph may be computed in this manner. == Hierarchical Markov models == Hierarchical Markov models can be applied to categorize human behavior at various levels of abstraction. For example, a series of simple observations, such as a person's location in a room, can be interpreted to determine more complex information, such as in what task or activity the person is performing. Two kinds of Hierarchical Markov Models are the Hierarchical hidden Markov model and the Abstract Hidden Markov Model. Both have been used for behavior recognition and certain conditional independence properties between different levels of abstraction in the model allow for faster learning and inference. == Tolerant Markov model == A Tolerant Markov model (TMM) is a probabilistic-algorithmic Markov chain model. It assigns the probabilities according to a conditioning context that considers the last symbol, from the sequence to occur, as the most probable instead of the true occurring symbol. A TMM can model three different natures: substitutions, additions or deletions. Successful applications have been efficiently implemented in DNA sequences compression. == Markov-chain forecasting models == Markov-chains have been used as a forecasting methods for several topics, for example price trends, wind power and solar irradiance. The Markov-chain forecasting models utilize a variety of different settings, from discretizing the time-series to hidden Markov-models combined with wavelets and the Markov-chain mixture distribution model (MCM).
Read more →
Lexalytics

Lexalytics, Inc. provides sentiment and intent analysis to an array of companies using SaaS and cloud based technology. Salience 6, the engine behind Lexalytics, was built as an on-premises, multi-lingual text analysis engine. It is leased to other companies who use it to power filtering and reputation management programs. In July, 2015 Lexalytics acquired Semantria to be used as a cloud option for its technology. In September, 2021 Lexalytics was acquired by CX company InMoment. == History == Lexalytics spun into existence in January 2003 out of a content management startup called Lightspeed. Lightspeed consolidated on America's West Coast. Jeff Catlin, a Lightspeed General Manager, and Mike Marshall, a Lighstpeed Principal Engineer, convinced investors to give them the East Coast company so as to avoid shutdown costs. Catlin and Marshall renamed the operation Lexalytics. Catlin took on the role of chief executive officer with Marshall working as Chief Technology Officer. Lexalytics opted to not accept venture cash. Instead, the company initially shared sales and marketing expenses with U.K. based document management company Infonic. The partner companies soon formed a joint venture in July 2008, which was later dissolved. Since then, Lexalytics has worked with many other companies, like Bottlenose, Salesforce, Thomson Reuters, Oracle and DataSift. Relationships with social media monitoring companies like Datasift tend to find Lexalytics’ Salience engine baked into the product itself. Lexalytics is used similarly to monitor sentiment as it relates to stock trading. In December 2014, Lexalytics announced the latest iteration to its sentiment analysis engine, Salience 6. Earlier that year Lexalytics acquired Semantria in a bid to appeal to a wider variety of business models. Created by former Lexalytics Marketing Director Oleg Rogynskyy, Semantria is a SaaS text mining service offered as an API and Excel based plugin that measures sentiment. The goal of the acquisition, which cost Lexalytics less than US$10 million, was to expand the customer base both within the United States and abroad with multilingual support. The engine that powers Semantria, Salience, is grounded in its deep learning ability. An example of this is its concept matrix, which allows Salience an understanding of concepts and relationship between concepts based on a detailed reading of the entire repository of Wikipedia. This matrix allows Salience to use Wikipedia for automatic categorization. Along with features like the concept matrix, Salience supports 16 international languages. The engine has earned Lexalytics a spot on EContent's “Top 100 Companies in the Digital Content Industry” List for 2014–2015. In September 2018, Lexalytics launched document data extraction market using natural language processing (NLP).
Read more →
Feature selection

In machine learning, feature selection is the process of selecting a subset of relevant features (variables, predictors) for use in model construction. Feature selection techniques are used for several reasons: simplification of models to make them easier to interpret, shorter training times, to avoid the curse of dimensionality, improve the compatibility of the data with a certain learning model class, to encode inherent symmetries present in the input space. The central premise when using feature selection is that data sometimes contains features that are redundant or irrelevant, and can thus be removed without incurring much loss of information. Redundancy and irrelevance are two distinct notions, since one relevant feature may be redundant in the presence of another relevant feature with which it is strongly correlated. Feature extraction creates new features from functions of the original features, whereas feature selection finds a subset of the features. Feature selection techniques are often used in domains where there are many features and comparatively few samples (data points). == Introduction == A feature selection algorithm can be seen as the combination of a search technique for proposing new feature subsets, along with an evaluation measure which scores the different feature subsets. The simplest algorithm is to test each possible subset of features finding the one which minimizes the error rate. This is an exhaustive search of the space, and is computationally intractable for all but the smallest of feature sets. The choice of evaluation metric heavily influences the algorithm, and it is these evaluation metrics which distinguish between the three main categories of feature selection algorithms: wrappers, filters and embedded methods. Wrapper methods use a predictive model to score feature subsets. Each new subset is used to train a model, which is tested on a hold-out set. Counting the number of mistakes made on that hold-out set (the error rate of the model) gives the score for that subset. As wrapper methods train a new model for each subset, they are very computationally intensive, but usually provide the best performing feature set for that particular type of model or typical problem. Filter methods use a proxy measure instead of the error rate to score a feature subset. This measure is chosen to be fast to compute, while still capturing the usefulness of the feature set. Common measures include the mutual information, the pointwise mutual information, Pearson product-moment correlation coefficient, Relief-based algorithms, and inter/intra class distance or the scores of significance tests for each class/feature combinations. Filters are usually less computationally intensive than wrappers, but they produce a feature set which is not tuned to a specific type of predictive model. This lack of tuning means a feature set from a filter is more general than the set from a wrapper, usually giving lower prediction performance than a wrapper. However the feature set doesn't contain the assumptions of a prediction model, and so is more useful for exposing the relationships between the features. Many filters provide a feature ranking rather than an explicit best feature subset, and the cut off point in the ranking is chosen via cross-validation. Filter methods have also been used as a preprocessing step for wrapper methods, allowing a wrapper to be used on larger problems. One other popular approach is the Recursive Feature Elimination algorithm, commonly used with Support Vector Machines to repeatedly construct a model and remove features with low weights. Embedded methods are a catch-all group of techniques which perform feature selection as part of the model construction process. The exemplar of this approach is the LASSO method for constructing a linear model, which penalizes the regression coefficients with an L1 penalty, shrinking many of them to zero. Any features which have non-zero regression coefficients are 'selected' by the LASSO algorithm. Improvements to the LASSO include Bolasso which bootstraps samples; Elastic net regularization, which combines the L1 penalty of LASSO with the L2 penalty of ridge regression; and FeaLect which scores all the features based on combinatorial analysis of regression coefficients. AEFS further extends LASSO to nonlinear scenario with autoencoders. These approaches tend to be between filters and wrappers in terms of computational complexity. In traditional regression analysis, the most popular form of feature selection is stepwise regression, which is a wrapper technique. It is a greedy algorithm that adds the best feature (or deletes the worst feature) at each round. The main control issue is deciding when to stop the algorithm. In machine learning, this is typically done by cross-validation. In statistics, some criteria are optimized. This leads to the inherent problem of nesting. More robust methods have been explored, such as branch and bound and piecewise linear network. == Subset selection == Subset selection evaluates a subset of features as a group for suitability. Subset selection algorithms can be broken up into wrappers, filters, and embedded methods. Wrappers use a search algorithm to search through the space of possible features and evaluate each subset by running a model on the subset. Wrappers can be computationally expensive and have a risk of over fitting to the model. Filters are similar to wrappers in the search approach, but instead of evaluating against a model, a simpler filter is evaluated. Embedded techniques are embedded in, and specific to, a model. Many popular search approaches use greedy hill climbing, which iteratively evaluates a candidate subset of features, then modifies the subset and evaluates if the new subset is an improvement over the old. Evaluation of the subsets requires a scoring metric that grades a subset of features. Exhaustive search is generally impractical, so at some implementor (or operator) defined stopping point, the subset of features with the highest score discovered up to that point is selected as the satisfactory feature subset. The stopping criterion varies by algorithm; possible criteria include: a subset score exceeds a threshold, a program's maximum allowed run time has been surpassed, etc. Alternative search-based techniques are based on targeted projection pursuit which finds low-dimensional projections of the data that score highly: the features that have the largest projections in the lower-dimensional space are then selected. Search approaches include: Exhaustive Best first Simulated annealing Genetic algorithm Greedy forward selection Greedy backward elimination Particle swarm optimization Targeted projection pursuit Scatter search Variable neighborhood search Two popular filter metrics for classification problems are correlation and mutual information, although neither are true metrics or 'distance measures' in the mathematical sense, since they fail to obey the triangle inequality and thus do not compute any actual 'distance' – they should rather be regarded as 'scores'. These scores are computed between a candidate feature (or set of features) and the desired output category. There are, however, true metrics that are a simple function of the mutual information; see here. Other available filter metrics include: Class separability Error probability Inter-class distance Probabilistic distance Entropy Consistency-based feature selection Correlation-based feature selection == Optimality criteria == The choice of optimality criteria is difficult as there are multiple objectives in a feature selection task. Many common criteria incorporate a measure of accuracy, penalised by the number of features selected. Examples include Akaike information criterion (AIC) and Mallows's Cp, which have a penalty of 2 for each added feature. AIC is based on information theory, and is effectively derived via the maximum entropy principle. Other criteria are Bayesian information criterion (BIC), which uses a penalty of log ⁡ n {\displaystyle {\sqrt {\log {n}}}} for each added feature, minimum description length (MDL) which asymptotically uses log ⁡ n {\displaystyle {\sqrt {\log {n}}}} , Bonferroni / RIC which use 2 log ⁡ p {\displaystyle {\sqrt {2\log {p}}}} , maximum dependency feature selection, and a variety of new criteria that are motivated by false discovery rate (FDR), which use something close to 2 log ⁡ p q {\displaystyle {\sqrt {2\log {\frac {p}{q}}}}} . A maximum entropy rate criterion may also be used to select the most relevant subset of features. == Structure learning == Filter feature selection is a specific case of a more general paradigm called structure learning. Feature selection finds the relevant feature set for a specific target variable whereas structure learning finds the relationships between all the variables, usually by expressing these relationships as a graph. The most common structure learning algorithms
Read more →
Minimum Population Search

In evolutionary computation, Minimum Population Search (MPS) is a computational method that optimizes a problem by iteratively trying to improve a set of candidate solutions with regard to a given measure of quality. It solves a problem by evolving a small population of candidate solutions by means of relatively simple arithmetical operations. MPS is a metaheuristic as it makes few or no assumptions about the problem being optimized and can search very large spaces of candidate solutions. For problems where finding the precise global optimum is less important than finding an acceptable local optimum in a fixed amount of time, using a metaheuristic such as MPS may be preferable to alternatives such as brute-force search or gradient descent. MPS is used for multidimensional real-valued functions but does not use the gradient of the problem being optimized, which means MPS does not require for the optimization problem to be differentiable as is required by classic optimization methods such as gradient descent and quasi-newton methods. MPS can therefore also be used on optimization problems that are not even continuous, are noisy, change over time, etc. == Background == In a similar way to Differential evolution, MPS uses difference vectors between the members of the population in order to generate new solutions. It attempts to provide an efficient use of function evaluations by maintaining a small population size. If the population size is smaller than the dimensionality of the search space, then the solutions generated through difference vectors will be constrained to the n − 1 {\displaystyle n-1} dimensional hyperplane. A smaller population size will lead to a more restricted subspace. With a population size equal to the dimensionality of the problem ( n = d ) {\displaystyle (n=d)} , the “line/hyperplane points” in MPS will be generated within a d − 1 {\displaystyle d-1} dimensional hyperplane. Taking a step orthogonal to this hyperplane will allow the search process to cover all the dimensions of the search space. Population size is a fundamental parameter in the performance of population-based heuristics. Larger populations promote exploration, but they also allow fewer generations, and this can reduce the chance of convergence. Searching with a small population can increase the chances of convergence and the efficient use of function evaluations, but it can also induce the risk of premature convergence. If the risk of premature convergence can be avoided, then a population-based heuristic could benefit from the efficiency and faster convergence rate of a smaller population. To avoid premature convergence, it is important to have a diversified population. By including techniques for explicitly increasing diversity and exploration, it is possible to have smaller populations with less risk of premature convergence. === Thresheld Convergence === Thresheld Convergence (TC) is a diversification technique which attempts to separate the processes of exploration and exploitation. TC uses a “threshold” function to establish a minimum search step, and managing this step makes it possible to influence the transition from exploration to exploitation, convergence is thus “held” back until the last stages of the search process. The goal of a controlled transition is to avoid an early concentration of the population around a few search regions and avoid the loss of diversity which can cause premature convergence. Thresheld Convergence has been successfully applied to several population-based metaheuristics such as Particle Swarm Optimization, Differential evolution, Evolution strategies, Simulated annealing and Estimation of Distribution Algorithms. The ideal case for Thresheld Convergence is to have one sample solution from each attraction basin, and for each sample solution to have the same relative fitness with respect to its local optimum. Enforcing a minimum step aims to achieve this ideal case. In MPS Thresheld Convergence is specifically used to preserve diversity and avoid premature convergence by establishing a minimum search step. By disallowing new solutions which are too close to members of the current population, TC forces a strong exploration during the early stages of the search while preserving the diversity of the (small) population. == Algorithm == A basic variant of the MPS algorithm works by having a population of size equal to the dimension of the problem. New solutions are generated by exploring the hyperplane defined by the current solutions (by means of difference vectors) and performing an additional orthogonal step in order to avoid getting caught in this hyperplane. The step sizes are controlled by the Thresheld Convergence technique, which gradually reduces step sizes as the search process advances. An outline for the algorithm is given below: Generate the first initial population. Allowing these solutions to lie near the bounds of the search space generally gives good results: s k = ( r s 1 ∗ b o u n d 1 / 2 , r s 2 ∗ b o u n d 2 / 2 , . . . , r s n ∗ b o u n d n / 2 ) {\displaystyle s_{k}=(rs_{1}bound_{1}/2,rs_{2}bound_{2}/2,...,rs_{n}bound_{n}/2)} where s k {\displaystyle s_{k}} is the k {\displaystyle k} -th population member, r s i {\displaystyle rs_{i}} are random numbers which can be −1 or 1, and the b o u n d i {\displaystyle bound_{i}} are the lower and upper bounds on each dimension. While a stop condition is not reached: Update threshold convergence values ( m i n _ s t e p {\displaystyle min\_step} and m a x _ s t e p {\displaystyle max\_step} ) Calculate the centroid of the current population ( x c {\displaystyle x_{c}} ) For each member of the population ( x i {\displaystyle x_{i}} ), generate a new offspring as follows: Uniformly generate a scaling factor ( F i {\displaystyle F_{i}} ) between − m a x _ s t e p {\displaystyle -max\_step} and m a x _ s t e p {\displaystyle max\_step} Generate a vector ( x o {\displaystyle x_{o}} ) orthogonal to the difference vector between x i {\displaystyle x_{i}} and x c {\displaystyle x_{c}} Calculate a scaling factor for the orthogonal vector: m i n _ o r t h = s q r t ( m a x ( m i n _ s t e p 2 − F i 2 , 0 ) ) {\displaystyle min\_orth=sqrt(max(min\_step^{2}-F_{i}^{2},0))} m a x _ o r t h = s q r t ( m a x ( m a x _ s t e p 2 − F i 2 , 0 ) ) {\displaystyle max\_orth=sqrt(max(max\_step^{2}-F_{i}^{2},0))} o r t h _ s t e p = u n i f o r m ( m i n _ o r t h , m a x _ o r t h ) {\displaystyle orth\_step=uniform(min\_orth,max\_orth)} Generate the new solution by adding the difference and the orthogonal vectors to the original solution n e w _ s o l u t i o n = x i + F i ∗ ( x i − x c ) ∗ o r t h _ s t e p ∗ x o {\displaystyle new\_solution=x_{i}+F_{i}(x_{i}-x_{c})orth\_stepx_{o}} Pick the best members between the old population and the new one by discarding the least fit members. Return the single best solution or the best population found as the final result.
Read more →
Linear classifier

In machine learning, a linear classifier makes a classification decision for each object based on a linear combination of its features. A simpler definition is to say that a linear classifier is one whose decision boundaries are linear. Such classifiers work well for practical problems such as document classification, and more generally for problems with many variables (features), reaching accuracy levels comparable to non-linear classifiers while taking less time to train and use. == Definition == If the input feature vector to the classifier is a real vector x → {\displaystyle {\vec {x}}} , then the output score is y = f ( w → ⋅ x → ) = f ( ∑ j w j x j ) , {\displaystyle y=f({\vec {w}}\cdot {\vec {x}})=f\left(\sum _{j}w_{j}x_{j}\right),} where w → {\displaystyle {\vec {w}}} is a real vector of weights and f is a function that converts the dot product of the two vectors into the desired output. (In other words, w → {\displaystyle {\vec {w}}} is a one-form or linear functional mapping x → {\displaystyle {\vec {x}}} onto R.) The weight vector w → {\displaystyle {\vec {w}}} is learned from a set of labeled training samples. Often f is a threshold function, which maps all values of w → ⋅ x → {\displaystyle {\vec {w}}\cdot {\vec {x}}} above a certain threshold to the first class and all other values to the second class; e.g., f ( x ) = { 1 if w T ⋅ x > θ , 0 otherwise {\displaystyle f(\mathbf {x} )={\begin{cases}1&{\text{if }}\ \mathbf {w} ^{T}\cdot \mathbf {x} >\theta ,\\0&{\text{otherwise}}\end{cases}}} The superscript T indicates the transpose and θ {\displaystyle \theta } is a scalar threshold. A more complex f might give the probability that an item belongs to a certain class. For a two-class classification problem, one can visualize the operation of a linear classifier as splitting a high-dimensional input space with a hyperplane: all points on one side of the hyperplane are classified as "yes", while the others are classified as "no". A linear classifier is often used in situations where the speed of classification is an issue, since it is often the fastest classifier, especially when x → {\displaystyle {\vec {x}}} is sparse. Also, linear classifiers often work very well when the number of dimensions in x → {\displaystyle {\vec {x}}} is large, as in document classification, where each element in x → {\displaystyle {\vec {x}}} is typically the number of occurrences of a word in a document (see document-term matrix). In such cases, the classifier should be well-regularized. == Generative models vs. discriminative models == There are two broad classes of methods for determining the parameters of a linear classifier w → {\displaystyle {\vec {w}}} . They can be generative and discriminative models. Methods of the former model joint probability distribution, whereas methods of the latter model conditional density functions P ( c l a s s | x → ) {\displaystyle P({\rm {class}}|{\vec {x}})} . Examples of such algorithms include: Linear Discriminant Analysis (LDA)—assumes Gaussian conditional density models Naive Bayes classifier with multinomial or multivariate Bernoulli event models. The second set of methods includes discriminative models, which attempt to maximize the quality of the output on a training set. Additional terms in the training cost function can easily perform regularization of the final model. Examples of discriminative training of linear classifiers include: Logistic regression—maximum likelihood estimation of w → {\displaystyle {\vec {w}}} assuming that the observed training set was generated by a binomial model that depends on the output of the classifier. Perceptron—an algorithm that attempts to fix all errors encountered in the training set Fisher's Linear Discriminant Analysis—an algorithm (different than "LDA") that maximizes the ratio of between-class scatter to within-class scatter, without any other assumptions. It is in essence a method of dimensionality reduction for binary classification. Support vector machine—an algorithm that maximizes the margin between the decision hyperplane and the examples in the training set. Note: Despite its name, LDA does not belong to the class of discriminative models in this taxonomy. However, its name makes sense when we compare LDA to the other main linear dimensionality reduction algorithm: principal components analysis (PCA). LDA is a supervised learning algorithm that utilizes the labels of the data, while PCA is an unsupervised learning algorithm that ignores the labels. To summarize, the name is a historical artifact. Discriminative training often yields higher accuracy than modeling the conditional density functions. However, handling missing data is often easier with conditional density models. All of the linear classifier algorithms listed above can be converted into non-linear algorithms operating on a different input space φ ( x → ) {\displaystyle \varphi ({\vec {x}})} , using the kernel trick. === Discriminative training === Discriminative training of linear classifiers usually proceeds in a supervised way, by means of an optimization algorithm that is given a training set with desired outputs and a loss function that measures the discrepancy between the classifier's outputs and the desired outputs. Thus, the learning algorithm solves an optimization problem of the form arg ⁡ min w R ( w ) + C ∑ i = 1 N L ( y i , w T x i ) {\displaystyle {\underset {\mathbf {w} }{\arg \min }}\;R(\mathbf {w} )+C\sum _{i=1}^{N}L(y_{i},\mathbf {w} ^{\mathsf {T}}\mathbf {x} _{i})} where w is a vector of classifier parameters, L(yi, wTxi) is a loss function that measures the discrepancy between the classifier's prediction and the true output yi for the i'th training example, R(w) is a regularization function that prevents the parameters from getting too large (causing overfitting), and C is a scalar constant (set by the user of the learning algorithm) that controls the balance between the regularization and the loss function. Popular loss functions include the hinge loss (for linear SVMs) and the log loss (for linear logistic regression). If the regularization function R is convex, then the above is a convex problem. Many algorithms exist for solving such problems; popular ones for linear classification include (stochastic) gradient descent, L-BFGS, coordinate descent and Newton methods.
Read more →
2024 National Public Data breach

In August 2024, three class-action lawsuits were filed against National Public Data along with over 14 complaints filed in federal court, claiming that the company permitted hackers to steal sensitive private information covering millions of individuals. The theft was alleged to have occurred in April 2024. One of the lawsuits specifically claims that in April, a hacker going by the moniker "USDoD" posted a notice on the dark web, offering the data for sale at the price of US$3.5 million. The information stolen is alleged to include 2.9 billion records containing full names, current and past addresses, Social Security numbers, dates of birth, and telephone numbers. The stolen data contains records for people in the US, UK, and Canada. National Public Data confirmed on August 16, 2024, there was a breach originating from someone trying to breach their systems since December 2023, with the breach occurring from April 2024 and over the next few months. The company also confirmed that 2.9 billion records were obtained, though they were still working to determine how many people were affected by the breach, and were working with law enforcement to identify the hacker. == Jerico Pictures == Jerico Pictures, Inc., doing business as National Public Data, was a data broker company that performed employee background checks. Their primary service was collecting information from public data sources, including criminal records, addresses, and employment history, and offering that information for sale. On October 2, 2024, Jerico Pictures filed for Chapter 11 bankruptcy as it currently faces over a dozen lawsuits over the breach, and is potentially liable "for credit monitoring for hundreds of millions of potentially impacted individuals." In December 2024, National Public Data shut down, showing a closure notice on its website.
Read more →
Relief (feature selection)

Relief is an algorithm developed by Kenji Kira and Larry Rendell in 1992 that takes a filter-method approach to feature selection that is notably sensitive to feature interactions. It was originally designed for application to binary classification problems with discrete or numerical features. Relief calculates a feature score for each feature which can then be applied to rank and select top scoring features for feature selection. Alternatively, these scores may be applied as feature weights to guide downstream modeling. Relief feature scoring is based on the identification of feature value differences between nearest neighbor instance pairs. If a feature value difference is observed in a neighboring instance pair with the same class (a 'hit'), the feature score decreases. Alternatively, if a feature value difference is observed in a neighboring instance pair with different class values (a 'miss'), the feature score increases. The original Relief algorithm has since inspired a family of Relief-based feature selection algorithms (RBAs), including the ReliefF algorithm. Beyond the original Relief algorithm, RBAs have been adapted to (1) perform more reliably in noisy problems, (2) generalize to multi-class problems (3) generalize to numerical outcome (i.e. regression) problems, and (4) to make them robust to incomplete (i.e. missing) data. To date, the development of RBA variants and extensions has focused on four areas; (1) improving performance of the 'core' Relief algorithm, i.e. examining strategies for neighbor selection and instance weighting, (2) improving scalability of the 'core' Relief algorithm to larger feature spaces through iterative approaches, (3) methods for flexibly adapting Relief to different data types, and (4) improving Relief run efficiency. Their strengths are that they are not dependent on heuristics, they run in low-order polynomial time, and they are noise-tolerant and robust to feature interactions, as well as being applicable for binary or continuous data; however, it does not discriminate between redundant features, and low numbers of training instances fool the algorithm. == Relief Algorithm == Take a data set with n instances of p features, belonging to two known classes. Within the data set, each feature should be scaled to the interval [0 1] (binary data should remain as 0 and 1). The algorithm will be repeated m times. Start with a p-long weight vector (W) of zeros. At each iteration, take the feature vector (X) belonging to one random instance, and the feature vectors of the instance closest to X (by Euclidean distance) from each class. The closest same-class instance is called 'near-hit', and the closest different-class instance is called 'near-miss'. Update the weight vector such that W i = W i − ( x i − n e a r H i t i ) 2 + ( x i − n e a r M i s s i ) 2 , {\displaystyle W_{i}=W_{i}-(x_{i}-\mathrm {nearHit} _{i})^{2}+(x_{i}-\mathrm {nearMiss} _{i})^{2},} where i {\displaystyle i} indexes the components and runs from 1 to p. Thus the weight of any given feature decreases if it differs from that feature in nearby instances of the same class more than nearby instances of the other class, and increases in the reverse case. After m iterations, divide each element of the weight vector by m. This becomes the relevance vector. Features are selected if their relevance is greater than a threshold τ. Kira and Rendell's experiments showed a clear contrast between relevant and irrelevant features, allowing τ to be determined by inspection. However, it can also be determined by Chebyshev's inequality for a given confidence level (α) that a τ of 1/sqrt(αm) is good enough to make the probability of a Type I error less than α, although it is stated that τ can be much smaller than that. Relief was also described as generalizable to multinomial classification by decomposition into a number of binary problems. == ReliefF Algorithm == Kononenko et al. propose a number of updates to Relief. Firstly, they find the near-hit and near-miss instances using the Manhattan (L1) norm rather than the Euclidean (L2) norm, although the rationale is not specified. Furthermore, they found taking the absolute differences between xi and near-hiti, and xi and near-missi to be sufficient when updating the weight vector (rather than the square of those differences). === Reliable probability estimation === Rather than repeating the algorithm m times, implement it exhaustively (i.e. n times, once for each instance) for relatively small n (up to one thousand). Furthermore, rather than finding the single nearest hit and single nearest miss, which may cause redundant and noisy attributes to affect the selection of the nearest neighbors, ReliefF searches for k nearest hits and misses and averages their contribution to the weights of each feature. k can be tuned for any individual problem. === Incomplete data === In ReliefF, the contribution of missing values to the feature weight is determined using the conditional probability that two values should be the same or different, approximated with relative frequencies from the data set. This can be calculated if one or both features are missing. === Multi-class problems === Rather than use Kira and Rendell's proposed decomposition of a multinomial classification into a number of binomial problems, ReliefF searches for k near misses from each different class and averages their contributions for updating W, weighted with the prior probability of each class. == Other Relief-based Algorithm Extensions/Derivatives == The following RBAs are arranged chronologically from oldest to most recent. They include methods for improving (1) the core Relief algorithm concept, (2) iterative approaches for scalability, (3) adaptations to different data types, (4) strategies for computational efficiency, or (5) some combination of these goals. For more on RBAs see these book chapters or this most recent review paper. === RRELIEFF === Robnik-Šikonja and Kononenko propose further updates to ReliefF, making it appropriate for regression. === Relieved-F === Introduced deterministic neighbor selection approach and a new approach for incomplete data handling. === Iterative Relief === Implemented method to address bias against non-monotonic features. Introduced the first iterative Relief approach. For the first time, neighbors were uniquely determined by a radius threshold and instances were weighted by their distance from the target instance. === I-RELIEF === Introduced sigmoidal weighting based on distance from target instance. All instance pairs (not just a defined subset of neighbors) contributed to score updates. Proposed an on-line learning variant of Relief. Extended the iterative Relief concept. Introduced local-learning updates between iterations for improved convergence. === TuRF (a.k.a. Tuned ReliefF) === Specifically sought to address noise in large feature spaces through the recursive elimination of features and the iterative application of ReliefF. === Evaporative Cooling ReliefF === Similarly seeking to address noise in large feature spaces. Utilized an iterative `evaporative' removal of lowest quality features using ReliefF scores in association with mutual information. === EReliefF (a.k.a. Extended ReliefF) === Addressing issues related to incomplete and multi-class data. === VLSReliefF (a.k.a. Very Large Scale ReliefF) === Dramatically improves the efficiency of detecting 2-way feature interactions in very large feature spaces by scoring random feature subsets rather than the entire feature space. === ReliefMSS === Introduced calculation of feature weights relative to average feature 'diff' between instance pairs. === SURF === SURF identifies nearest neighbors (both hits and misses) based on a distance threshold from the target instance defined by the average distance between all pairs of instances in the training data. Results suggest improved power to detect 2-way epistatic interactions over ReliefF. === SURF (a.k.a. SURFStar) === SURF extends the SURF algorithm to not only utilized 'near' neighbors in scoring updates, but 'far' instances as well, but employing inverted scoring updates for 'far instance pairs. Results suggest improved power to detect 2-way epistatic interactions over SURF, but an inability to detect simple main effects (i.e. univariate associations). === SWRF === SWRF extends the SURF algorithm adopting sigmoid weighting to take distance from the threshold into account. Also introduced a modular framework for further developing RBAs called MoRF. === MultiSURF (a.k.a. MultiSURFStar) === MultiSURF extends the SURF algorithm adapting the near/far neighborhood boundaries based on the average and standard deviation of distances from the target instance to all others. MultiSURF uses the standard deviation to define a dead-band zone where 'middle-distance' instances do not contribute to scoring. Evidence suggests MultiSURF performs best in detecting pure 2-way feature interactions. === Reli
Read more →
Generalized multidimensional scaling

Generalized multidimensional scaling (GMDS) is an extension of metric multidimensional scaling, in which the target space is non-Euclidean. When the dissimilarities are distances on a surface and the target space is another surface, GMDS allows finding the minimum-distortion embedding of one surface into another. GMDS is an emerging research direction. Currently, main applications are recognition of deformable objects (e.g. for three-dimensional face recognition) and texture mapping.
Read more →