AI Generator Character

AI Generator Character — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Integrated test facility

  An integrated test facility (ITF) creates a fictitious entity in a database to process test transactions simultaneously with live input. ITF can be used to incorporate test transactions into a normal production run of a system. Its advantage is that periodic testing does not require separate test processes. However, careful planning is necessary, and test data must be isolated from production data. Moreover, ITF validates the correct operation of a transaction in an application, but it does not ensure that a system is being operated correctly. Integrated test facility is considered a useful audit tool during an IT audit because it uses the same programs to compare processing using independently calculated data. This involves setting up dummy entities on an application system and processing test or production data against the entity as a means of verifying processing accuracy.

  Read more →
• 

  Feed forward (control)

  A feed forward (sometimes written feedforward) is an element or pathway within a control system that passes a controlling signal from a source in its external environment to a load elsewhere in its external environment. This is often a command signal from an external operator. In control engineering, a feedforward control system is a control system that uses sensors to detect disturbances affecting the system and then applies an additional input to minimize the effect of the disturbance. This requires a mathematical model of the system so that the effect of disturbances can be properly predicted. A control system which has only feed-forward behavior responds to its control signal in a pre-defined way without responding to the way the system reacts; it is in contrast with a system that also has feedback, which adjusts the input to take account of how it affects the system, and how the system itself may vary unpredictably. In a feed-forward system, the control variable adjustment is not error-based. Instead it is based on knowledge about the process in the form of a mathematical model of the process and knowledge about, or measurements of, the process disturbances. Some prerequisites are needed for control scheme to be reliable by pure feed-forward without feedback: the external command or controlling signal must be available, and the effect of the output of the system on the load should be known (that usually means that the load must be predictably unchanging with time). Sometimes pure feed-forward control without feedback is called 'ballistic', because once a control signal has been sent, it cannot be further adjusted; any corrective adjustment must be by way of a new control signal. In contrast, 'cruise control' adjusts the output in response to the load that it encounters, by a feedback mechanism. These systems could relate to control theory, physiology, or computing. == Overview == With feed-forward or feedforward control, the disturbances are measured and accounted for before they have time to affect the system. In the house example, a feed-forward system may measure the fact that the door is opened and automatically turn on the heater before the house can get too cold. The difficulty with feed-forward control is that the effects of the disturbances on the system must be accurately predicted, and there must not be any unmeasured disturbances. For instance, if a window was opened that was not being measured, the feed-forward-controlled thermostat might let the house cool down. The term has specific meaning within the field of CPU-based automatic control. The discipline of feedforward control as it relates to modern, CPU based automatic controls is widely discussed, but is seldom practiced due to the difficulty and expense of developing or providing for the mathematical model required to facilitate this type of control. Open-loop control and feedback control, often based on canned PID control algorithms, are much more widely used. There are three types of control systems: open-loop, feed-forward, and feedback. An example of a pure open-loop control system is manual non-power-assisted steering of a motor car; the steering system does not have access to an auxiliary power source and does not respond to varying resistance to turning of the direction wheels; the driver must make that response without help from the steering system. In comparison, power steering has access to a controlled auxiliary power source, which depends on the engine speed. When the steering wheel is turned, a valve is opened which allows fluid under pressure to turn the wheels. A sensor monitors that pressure so that the valve only opens enough to cause the correct pressure to reach the wheel turning mechanism. This is feed-forward control where the output of the system, the change in direction of travel of the vehicle, plays no part in the system. See Model predictive control. If the driver is included in the system, then they do provide a feedback path by observing the direction of travel and compensating for errors by turning the steering wheel. In that case you have a feedback system, and the block labeled System in Figure(c) is a feed-forward system. In other words, systems of different types can be nested, and the overall system regarded as a black-box. Feedforward control is distinctly different from open-loop control and teleoperator systems. Feedforward control requires a mathematical model of the plant (process and/or machine being controlled) and the plant's relationship to any inputs or feedback the system might receive. Neither open-loop control nor teleoperator systems require the sophistication of a mathematical model of the physical system or plant being controlled. Control based on operator input without integral processing and interpretation through a mathematical model of the system is a teleoperator system and is not considered feedforward control. == History == Historically, the use of the term feedforward is found in works by Harold S. Black in US patent 1686792 (invented 17 March 1923) and D. M. MacKay as early as 1956. While MacKay's work is in the field of biological control theory, he speaks only of feedforward systems. MacKay does not mention feedforward control or allude to the discipline of feedforward controls. MacKay and other early writers who use the term feedforward are generally writing about theories of how human or animal brains work. Black also has US patent 2102671 invented 2 August 1927 on the technique of feedback applied to electronic systems. The discipline of feedforward controls was largely developed by professors and graduate students at Georgia Tech, MIT, Stanford and Carnegie Mellon. Feedforward is not typically hyphenated in scholarly publications. Meckl and Seering of MIT and Book and Dickerson of Georgia Tech began the development of the concepts of Feedforward Control in the mid-1970s. The discipline of Feedforward Controls was well defined in many scholarly papers, articles and books by the late 1980s. == Benefits == The benefits of feedforward control are significant and can often justify the extra cost, time and effort required to implement the technology. Control accuracy can often be improved by as much as an order of magnitude if the mathematical model is of sufficient quality and implementation of the feedforward control law is well thought out. Energy consumption by the feedforward control system and its driver is typically substantially lower than with other controls. Stability is enhanced such that the controlled device can be built of lower cost, lighter weight, springier materials while still being highly accurate and able to operate at high speeds. Other benefits of feedforward control include reduced wear and tear on equipment, lower maintenance costs, higher reliability and a substantial reduction in hysteresis. Feedforward control is often combined with feedback control to optimize performance. == Model == The mathematical model of the plant (machine, process or organism) used by the feedforward control system may be created and input by a control engineer or it may be learned by the control system. Control systems capable of learning and/or adapting their mathematical model have become more practical as microprocessor speeds have increased. The discipline of modern feedforward control was itself made possible by the invention of microprocessors. Feedforward control requires integration of the mathematical model into the control algorithm such that it is used to determine the control actions based on what is known about the state of the system being controlled. In the case of control for a lightweight, flexible robotic arm, this could be as simple as compensating between when the robot arm is carrying a payload and when it is not. The target joint angles are adjusted to place the payload in the desired position based on knowing the deflections in the arm from the mathematical model's interpretation of the disturbance caused by the payload. Systems that plan actions and then pass the plan to a different system for execution do not satisfy the above definition of feedforward control. Unless the system includes a means to detect a disturbance or receive an input and process that input through the mathematical model to determine the required modification to the control action, it is not true feedforward control. === Open system === In control theory, an open system is a feed forward system that does not have any feedback loop to control its output. In contrast, a closed system uses on a feedback loop to control the operation of the system. In an open system, the output of the system is not fed back into the input to the system for control or operation. == Applications == === Physiological feed-forward system === In physiology, feed-forward control is exemplified by the normal anticipatory regulation of heartbeat in advance of actual physical exertion by the central autonomic network. Feed-forward

  Read more →
• 

  Cumulus (software)

  Cumulus is a digital asset management software designed for client/server system which is developed by Canto Software. The product makes use of metadata for indexing, organizing, and searching. == History == Cumulus was first released as a Macintosh application in 1992, and was named by Apple Computer as the "Most Innovative Product of 1992". Cumulus introduced search capabilities beyond those available in the Macintosh at the time, particularly relating to thumbnails. Cumulus 1.0 was a single-user product with no network capabilities. Among the main features of Cumulus 1.0, the search function automatically generated previews and contained support for the included AppleTalk – Peer-to-Peer – network. Cumulus 2.5 was available in five different languages and received the 1993 MacUser magazine Eddy award for "Best Publishing & Graphics Utility". In 1995, Canto introduced the scanner software "Cirrus" to focus on the development of Cumulus. Cumulus 3, released in 1996, introduced a server version for the first time and contained the possibility to spread files over the Internet via the "Web Publisher". Since Apple offered Cumulus 3 with its "Workgroup Server" as a bundle, Cumulus became one of the leading digital asset management systems. Cumulus 4 was the first version that was network-ready, and was available for Macintosh, Windows and UNIX operating systems allowing for cross-platform file sharing. Released in 1998, the support of Solaris was discounted later. Cumulus 5 modified the software core to use an open architecture providing an API to external systems and databases. The open architecture of Cumulus 5 also enabled a more functional bridge between Cumulus and the Internet. Cumulus 6 introduced Embedded Java Plugin (EJP) which allowed system integrators to build custom Java plug-ins in order to extend the functionality of the Cumulus client. Cumulus 6.5 marked the end of the Cumulus Single User Edition product, which was licensed to MediaDex for further development and distribution. Cumulus 7 was introduced summer of 2006. Cumulus 8 was released in June 2009, with new indexing capabilities taking advantage of multicore/multiprocessor systems, and ability to manage a wider variety of file formats. Cumulus 8.5 was released in May 2011. Support was added for multilingual metadata, sometimes referred to as "World Metadata." Cumulus Sites was updated to support metadata editing and file uploads. Cumulus 8.6 was released in July 2012, and contains an updated user interface for the administration of Cumulus Sites and additional features for web-based administration of Cumulus. Other additions include features for collaboration links, multi-language support and automated version control. Cumulus 9 was released in September 2013 and introduced a new Web Client User Interface and the Cumulus Video Cloud. The Cumulus Web Client UI was redesigned to provide users with a modern, easy-to-use interface to support and guide the user while addressing modern business needs. The Cumulus Video Cloud extends the Cumulus video handling capabilities to add conversion and global streaming. Cumulus 9 also saw the addition of upload collection links which allow external collaborators to drag and drop files directly into Cumulus without needing a Cumulus account. Cumulus 9.1 was released in May 2014 and introduced the Adobe Drive Adapter for Cumulus which allows users to browse and search digital assets in Cumulus directly from Adobe work environments such as Photoshop, InDesign, Illustrator, Premier and other Adobe applications. Cumulus 10 (Cumulus X) was released July 2015 and introduced two mobile-friendly products: the Cumulus app and Portals. The Cumulus app on iOS was designed to allow users to collaborate either on an iPhone or iPad. Portals is the read-only version of the Cumulus Web Client where users can work with assets that admins allow. Cumulus 10.1 was introduced in January 2016 and included the InDesign Client integration where users can work with Adobe InDesign while accessing their assets from Cumulus. Cumulus 10.2 was introduced in September 2016 and brought the Media Delivery Cloud using Amazon Web Services (AWS). It allows users to manage their media rendition in a single source and distribute media files globally across different channels and devices. Cumulus 10.2.3 was released in February 2017 and came with a "crop and customize photos" feature for Portals and the Web Client. == Product overview == The cataloging of the file via upload into the archive is where Cumulus transfers maximum information about the file from the metadata. For image or photo files, this is typically Exif and IPTC data. The metadata is mainly used to search the archive. The use of embargo data supports license management for copyrighted material. The managed files can be cataloged and their usage can be set. The indexing is based on a predefined taxonomy, which is governed by the internal rules of the organization or by industry standards. You can specify whether files can only be used for specific purposes or only by certain groups of people. The production management system includes version management for files. Via the publication function, the files can be distributed directly via links or e-mails. It's also possible to access from the outside via the Cumulus Portals web interface, which allows a read access to released content from the catalog. There are different variants, starting with the "Workgroup archive server" up to the "Enterprise Business Server" for large companies. Both server and client are extensible through a Java-based plug-in architecture. Since version 7.0, there is a web application based on Ajax with a separate user interface. For access to the Cumulus catalog on mobile, there has been an application for Apple devices based on iOS since 2010. == Miscellaneous == In 2015, Cumulus developer Canto established the first Canto digital asset management (DAM) event. The event is held annually in Berlin. The Henry Stewart team has been hosting DAM conferences since 2006.

  Read more →
• 

  Spherical basis

  In pure and applied mathematics, particularly quantum mechanics and computer graphics and their applications, a spherical basis is the basis used to express spherical tensors. The spherical basis closely relates to the description of angular momentum in quantum mechanics and spherical harmonic functions. While spherical polar coordinates are one orthogonal coordinate system for expressing vectors and tensors using polar and azimuthal angles and radial distance, the spherical basis are constructed from the standard basis and use complex numbers. == In three dimensions == A vector A in 3D Euclidean space R3 can be expressed in the familiar Cartesian coordinate system in the standard basis ex, ey, ez, and coordinates Ax, Ay, Az: or any other coordinate system with associated basis set of vectors. From this extend the scalars to allow multiplication by complex numbers, so that we are now working in C 3 {\displaystyle \mathbb {C} ^{3}} rather than R 3 {\displaystyle \mathbb {R} ^{3}} . === Basis definition === In the spherical bases denoted e+, e−, e0, and associated coordinates with respect to this basis, denoted A+, A−, A0, the vector A is: where the spherical basis vectors can be defined in terms of the Cartesian basis using complex-valued coefficients in the xy plane: in which i {\displaystyle i} denotes the imaginary unit, and one normal to the plane in the z direction: e 0 = e z {\displaystyle \mathbf {e} _{0}=\mathbf {e} _{z}} The inverse relations are: === Commutator definition === While giving a basis in a 3-dimensional space is a valid definition for a spherical tensor, it only covers the case for when the rank k {\displaystyle k} is 1. For higher ranks, one may use either the commutator, or rotation definition of a spherical tensor. The commutator definition is given below, any operator T q ( k ) {\displaystyle T_{q}^{(k)}} that satisfies the following relations is a spherical tensor: [ J ± , T q ( k ) ] = ℏ ( k ∓ q ) ( k ± q + 1 ) T q ± 1 ( k ) {\displaystyle [J_{\pm },T_{q}^{(k)}]=\hbar {\sqrt {(k\mp q)(k\pm q+1)}}T_{q\pm 1}^{(k)}} [ J z , T q ( k ) ] = ℏ q T q ( k ) {\displaystyle [J_{z},T_{q}^{(k)}]=\hbar qT_{q}^{(k)}} === Rotation definition === Analogously to how the spherical harmonics transform under a rotation, a general spherical tensor transforms as follows, when the states transform under the unitary Wigner D-matrix D ( R ) {\displaystyle {\mathcal {D}}(R)} , where R is a (3×3 rotation) group element in SO(3). That is, these matrices represent the rotation group elements. With the help of its Lie algebra, one can show these two definitions are equivalent. D ( R ) T q ( k ) D † ( R ) = ∑ q ′ = − k k T q ′ ( k ) D q ′ q ( k ) {\displaystyle {\mathcal {D}}(R)T_{q}^{(k)}{\mathcal {D}}^{\dagger }(R)=\sum _{q'=-k}^{k}T_{q'}^{(k)}{\mathcal {D}}_{q'q}^{(k)}} === Coordinate vectors === For the spherical basis, the coordinates are complex-valued numbers A+, A0, A−, and can be found by substitution of (3B) into (1), or directly calculated from the inner product ⟨, ⟩ (5): A 0 = ⟨ e 0 , A ⟩ = ⟨ e z , A ⟩ = A z {\displaystyle A_{0}=\left\langle \mathbf {e} _{0},\mathbf {A} \right\rangle =\left\langle \mathbf {e} _{z},\mathbf {A} \right\rangle =A_{z}} with inverse relations: In general, for two vectors with complex coefficients in the same real-valued orthonormal basis ei, with the property ei·ej = δij, the inner product is: where · is the usual dot product and the complex conjugate must be used to keep the magnitude (or "norm") of the vector positive definite. == Properties (three dimensions) == === Orthonormality === The spherical basis is an orthonormal basis, since the inner product ⟨, ⟩ (5) of every pair vanishes meaning the basis vectors are all mutually orthogonal: ⟨ e + , e − ⟩ = ⟨ e − , e 0 ⟩ = ⟨ e 0 , e + ⟩ = 0 {\displaystyle \left\langle \mathbf {e} _{+},\mathbf {e} _{-}\right\rangle =\left\langle \mathbf {e} _{-},\mathbf {e} _{0}\right\rangle =\left\langle \mathbf {e} _{0},\mathbf {e} _{+}\right\rangle =0} and each basis vector is a unit vector: ⟨ e + , e + ⟩ = ⟨ e − , e − ⟩ = ⟨ e 0 , e 0 ⟩ = 1 {\displaystyle \left\langle \mathbf {e} _{+},\mathbf {e} _{+}\right\rangle =\left\langle \mathbf {e} _{-},\mathbf {e} _{-}\right\rangle =\left\langle \mathbf {e} _{0},\mathbf {e} _{0}\right\rangle =1} hence the need for the normalizing factors of 1 / 2 {\displaystyle 1/\!{\sqrt {2}}} . === Change of basis matrix === The defining relations (3A) can be summarized by a transformation matrix U: ( e + e − e 0 ) = U ( e x e y e z ) , U = ( − 1 2 − i 2 0 + 1 2 − i 2 0 0 0 1 ) , {\displaystyle {\begin{pmatrix}\mathbf {e} _{+}\\\mathbf {e} _{-}\\\mathbf {e} _{0}\end{pmatrix}}=\mathbf {U} {\begin{pmatrix}\mathbf {e} _{x}\\\mathbf {e} _{y}\\\mathbf {e} _{z}\end{pmatrix}}\,,\quad \mathbf {U} ={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&-{\frac {i}{\sqrt {2}}}&0\\+{\frac {1}{\sqrt {2}}}&-{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,,} with inverse: ( e x e y e z ) = U − 1 ( e + e − e 0 ) , U − 1 = ( − 1 2 + 1 2 0 + i 2 + i 2 0 0 0 1 ) . {\displaystyle {\begin{pmatrix}\mathbf {e} _{x}\\\mathbf {e} _{y}\\\mathbf {e} _{z}\end{pmatrix}}=\mathbf {U} ^{-1}{\begin{pmatrix}\mathbf {e} _{+}\\\mathbf {e} _{-}\\\mathbf {e} _{0}\end{pmatrix}}\,,\quad \mathbf {U} ^{-1}={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&+{\frac {1}{\sqrt {2}}}&0\\+{\frac {i}{\sqrt {2}}}&+{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,.} It can be seen that U is a unitary matrix, in other words its Hermitian conjugate U† (complex conjugate and matrix transpose) is also the inverse matrix U−1. For the coordinates: ( A + A − A 0 ) = U ∗ ( A x A y A z ) , U ∗ = ( − 1 2 + i 2 0 + 1 2 + i 2 0 0 0 1 ) , {\displaystyle {\begin{pmatrix}A_{+}\\A_{-}\\A_{0}\end{pmatrix}}=\mathbf {U} ^{\mathrm {} }{\begin{pmatrix}A_{x}\\A_{y}\\A_{z}\end{pmatrix}}\,,\quad \mathbf {U} ^{\mathrm {} }={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&+{\frac {i}{\sqrt {2}}}&0\\+{\frac {1}{\sqrt {2}}}&+{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,,} and inverse: ( A x A y A z ) = ( U ∗ ) − 1 ( A + A − A 0 ) , ( U ∗ ) − 1 = ( − 1 2 + 1 2 0 − i 2 − i 2 0 0 0 1 ) . {\displaystyle {\begin{pmatrix}A_{x}\\A_{y}\\A_{z}\end{pmatrix}}=(\mathbf {U} ^{\mathrm {} })^{-1}{\begin{pmatrix}A_{+}\\A_{-}\\A_{0}\end{pmatrix}}\,,\quad (\mathbf {U} ^{\mathrm {} })^{-1}={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&+{\frac {1}{\sqrt {2}}}&0\\-{\frac {i}{\sqrt {2}}}&-{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,.} === Cross products === Taking cross products of the spherical basis vectors, we find an obvious relation: e q × e q = 0 {\displaystyle \mathbf {e} _{q}\times \mathbf {e} _{q}={\boldsymbol {0}}} where q is a placeholder for +, −, 0, and two less obvious relations: e ± × e ∓ = ± i e 0 {\displaystyle \mathbf {e} _{\pm }\times \mathbf {e} _{\mp }=\pm i\mathbf {e} _{0}} e ± × e 0 = ± i e ± {\displaystyle \mathbf {e} _{\pm }\times \mathbf {e} _{0}=\pm i\mathbf {e} _{\pm }} === Inner product in the spherical basis === The inner product between two vectors A and B in the spherical basis follows from the above definition of the inner product: ⟨ A , B ⟩ = A + B + ⋆ + A − B − ⋆ + A 0 B 0 ⋆ {\displaystyle \left\langle \mathbf {A} ,\mathbf {B} \right\rangle =A_{+}B_{+}^{\star }+A_{-}B_{-}^{\star }+A_{0}B_{0}^{\star }}

  Read more →
• 

  MyPertamina

  MyPertamina is a digital financial service platform from Pertamina that integrated with the apps LinkAja. This application is used for non-cash fuel oil payments at Pertamina's public fueling stations. == History == Originally, MyPertamina were merchandise outlets of Pertamina products. It was launched on December 21, 2016, with 3 outlets in Jakarta. MyPertamina sells clothes, hats, and other products with Pertamina products brands. One month later (January 2017), Pertamina and Bank Mandiri entered into a partnership to launch the Mandiri Credit Card Pertamina Mastercard product, so that consumers can make payments when users fill up fuel at Pertamina gas stations. In August 2017, MyPertamina app and electronic card were launched through MyPertamina Loyalty program at Gaikindo Indonesia International Auto Show 2017. The card can be used on EDC machines for non-cash payments. Initial balances are in its own app, that can be top up by ATMs and online banking.

  Read more →
• 

  Clubhouse (app)

  Clubhouse is an American social audio app for iOS and Android developed by Alpha Exploration Co. that enables users to participate in real-time, audio-only communication within virtual "rooms". Launched in March 2020 by Paul Davison and Rohan Seth, the platform is characterized by its "drop-in" nature, where users can join live discussions on a wide range of topics as either listeners or speakers. The application gained attention in early 2021, operating on an invite-only model and featuring appearances from public figures such as Elon Musk, Oprah Winfrey, and Mark Zuckerberg. During this period, Clubhouse reached a reported valuation of approximately $4 billion and contributed to the expansion of similar social audio features like Twitter Spaces and Spotify Greenroom. The app later expanded to Android in May 2021 and removed its waitlist in July 2021, opening access to the general public. == History == Clubhouse began as an invite only social media startup by Paul Davison and Rohan Seth in Fall 2019. Originally designed for podcasts with the name Talkshow, the app was rebranded as "Clubhouse" and officially released for the iOS operating system in March 2020 and as of May 2021 the Android systems as well. Clubhouse was valued at $100 million after receiving funding from notable angel investors. These investors included Ryan Hoover (Founder, Product Hunt), Balaji Srinivasan (Former CTO, Coinbase), James Beshara (Co-Founder, Tilt.com), and several venture capitalists, including a $12 million Series A investment from the venture capital firm, Andreessen Horowitz, in May 2020. The app gained popularity in the early months of the COVID-19 pandemic. It had 600,000 registered users by December 2020. In January 2021, CEO Paul Davison announced that the active weekly user base on the app consisted of approximately 2 million individuals. The company announced that it would start working on an Android version of the app. In that month, the app became widely used in Germany when German podcast hosts Philipp Klöckner and Philipp Gloeckler began an invite-chain over a Telegram group. It brought German influencers, journalists, and politicians to the platform. Clubhouse raised their Series B at a $1 billion valuation. On February 1, 2021, Clubhouse had an estimated 3.5 million downloads on a global level which grew rapidly to 8.1 million downloads by February 15. This significant growth in popularity was because celebrities such as Elon Musk and Mark Zuckerberg made appearances on the app. In the same month, Clubhouse hired an Android Software Developer. A year after the app's release, the number of weekly active users was greater than 10 million, but the user base declined 21% during three weeks from late February to early March. This decline was reportedly caused by a decrease in the number of Clubhouse users after its initial release. During its initial roll out, the app was accessible only by invitation, and invitation codes on eBay were selling at up to $400. On April 5, 2021, Clubhouse partnered with Stripe to launch its first monetizing feature called Clubhouse Payments. Although testing began with only 1,000 users, after a week, the company rolled out the functionality to another 60,000 or more users in the US. In the same month, Twitter entered in discussions to purchase Clubhouse for $4 billion. The talks ended with no acquisition. Later, the company raised their Series C round of funding at a $4 billion valuation. The app also received interest in a partnership, with the National Football League announcing a content deal that month; Twitter Spaces later poached Clubhouse's exclusive NFL deal with 20 official NFL Spaces scheduled for the 2021-22 season. Finally, On May 9, 2021, Clubhouse launched a beta version of the Android app for users in the US, and on May 21, 2021, Clubhouse became available worldwide for Android users. In July 2021, Clubhouse announced a partnership with TED to offer exclusive talks. and on July 21, 2021, the company discarded its invitation system and made the application available to all, though a wait list for registration was still applied in order to manage new traffic. As of the time of the announcement, the company stated it had 10 million users on the wait list. On September 23, 2021, the company announced a new feature named "Wave". In October 2021, Clubhouse rolled out new features called "Replays and Clips". In April 2023, the company announced it was reducing its staff by half amid a "resetting" due to post-pandemic market shifts. == Features == === Rooms === The primary feature of Clubhouse is real-time virtual "rooms" in which users can communicate with each other via audio. Rooms are divided into different categories based on levels of privacy. Moderator roles are denoted by a green star that appears next to the user's name. When a user joins a room, they are initially assigned to the role of a "listener" and cannot unmute themselves. Listeners can notify the moderators of their intent to join the stage and speak by clicking on the "raise hand" icon. Users who are invited to the stage become "speakers" and can unmute themselves. Users can exit a room by tapping the "leave quietly" button or with the help of peace sign emoji. === Houses === In August 2022, Clubhouse announced a feature called Houses, an invite-based version of the rooms. === Events === A lot of conversations in Clubhouse are of spontaneous nature. However, users can schedule conversations by creating events. While scheduling an event, users can first name the event and then set the date and time at which the conversation will begin. Users can also add co-hosts to help moderate the event. Once the event has been created, it is added to the Clubhouse "bulletin". The bulletin shows upcoming scheduled events and allows users to set notifications for events by clicking the bell icon corresponding to the event. Users can access the bulletin by clicking on the calendar icon at the top of the home page. === Clubs === At the Clubhouse, clubs are user communities that regularly discuss a common interest. Many clubs are present in Clubhouse which represents a wide array of topics. Users can find clubs by name under the search tab. A club consists of three categories of users: "Admin", "Leader", and "Member". Members can create private rooms and invite more users into the club. Leaders have all the privileges of a member. Apart from that, they are authorized to create/schedule club-branded open rooms. An admin can modify club settings, add/delete users, change user privileges and create/schedule any type of room. There are three types of clubs: "Open", "By Approval", and "Closed" for membership. Any user can join an open club by pressing the "Join The Club" button on the club profile. In case of approval, users need to apply and wait for membership by clicking the "Apply To Join" button on the club profile. The admins of the respective club are privileged to accept or reject the user's request. In a closed club, membership is limited to users selected by the club admin. All users of a club will be notified when a public room within the club is created. The club creation is restricted to active users and whoever creates the club will become the club admin. Eligible users can create a club by going to their profile, press the "+" sign present in the "Member of" section. Clubs in which a user is a member are shown on their profile page. The first club to half a million members was the Human Behavior Club founded by The Digital Doctor (Dr. Sohaib Imtiaz). === Backchannel === Backchannel is the messaging function which allows users to interact individually or within a group via text. The Backchannel feature was initially leaked on June 18, 2021, in response to the launch of Spotify Greenroom. This is notable step because, until this point, Clubhouse was voice only with no way to hyperlink or message. It was entirely dependent on Instagram and Twitter for text messaging. The feature was initially leaked in the App Store, which the company says was an accident on Twitter. A month later, after multiple failed attempts, the Clubhouse Backchannel finally launched on July 14, 2021. === Explore === The homepage of Clubhouse provides access to ongoing chat rooms, which are recommended based on the people and clubs that are followed by the user. As the users tap on the magnifying glass icon, they will be redirected to the explore page. On that page, users can search for people and clubs to follow and also find conversations categorized by topics. === Clubhouse Payments === This is the direct payment service provided by the app, which allows users to send money to content creators. It includes those users who had enabled this functionality in their profile. Money can be sent from users to the creator by clicking on their profile. Press "Send Money" then enter the amount you want to send. When a user does this for the first time, they'll be prompted to reg

  Read more →
• 

  Office automation

  Office automation refers to the varied computer machinery and software used to digitally create, collect, store, manipulate, and relay office information needed for accomplishing basic tasks. Raw data storage, electronic transfer, and the management of electronic business information comprise the basic activities of an office automation system. Office automation helps in optimizing or automating existing office procedures. The backbone of office automation is a local area network, which allows users to transfer data, mail and voice across the network. All office functions, including dictation, typing, filing, copying, fax, telex, microfilm and records management, telephone and telephone switchboard operations, fall into this category. Office automation was a popular term in the 1970s and 1980s as the desktop computer exploded onto the scene. Advantages of office automation include that it can get many tasks accomplished faster, it eliminates the need for a large staff, less storage is required to store data, and multiple people can update data simultaneously in the event of changes in schedule. == Outline == Businesses can easily purchase and stock their wares with the aid of technology. Many of the manual tasks that used to be done by hand can now be done through hand held devices and UPC and SKU coding. In the retail setting, automation also increases choice. Customers can easily process their payments through automated credit card machines and no longer have to wait in line for an employee to process and manually type in the credit card numbers. Office payrolls have been automated, which means no one has to manually cut checks, and those checks that are cut can be printed through computer programs. Direct deposit can be automatically set up and this further reduces the manual process, and most employees who participate in direct deposit often find their paychecks come earlier than if they'd have to wait for their checks to be written and then cleared by the bank. Other ways automation has reduced employee manpower on tasks is automated voice direction. Through the use of prompts, automated phone menus and directed calls, the need for employees to be dedicated to answer the phones has been reduced, and in some cases, eliminated.

  Read more →
• 

  Artisse AI

  Artisse AI is a Hong Kong-based technology company founded by William Wu. The company developed a mobile photography application using generative artificial intelligence to transform selfies into high-quality, personalized images. The app allows users to visualize themselves in various scenarios, outfits, and hairstyles, and they can adjust lighting and ambiance to match their preferences. The app launched in 2023 across multiple markets, including the United States, United Kingdom, Japan, South Korea, Canada, and Australia. By January 2024, users had generated over 5 million images. That same month, the company secured $6.7 million in seed funding to support product development and marketing. == History == Artisse was originally founded in South Korea in 2022 by William Wu. The early concept was connected to a virtual idol initiative developed in collaboration with a K-pop agency, intended to support Wu's blockchain gaming business. The project later evolved into a standalone AI photography application. The current version of the Artisse app was developed following the company's relocation to Hong Kong in 2022. In January 2024, Artisse secured $6.7 million in seed funding, led by The London Fund. The investment was aimed at supporting product development, marketing, and user acquisition. Artisse uses an AI algorithm to create hyperrealistic images from uploaded photos. The app generates personalized images by combining generative AI technology, a global pool of licensed talent, and finished art services. The app works with individual users and businesses, offering professional-grade photos and advertisement images. According to the British newspaper Evening Standard the company has developed the world's first and most advanced AI photographer. It captures 15-30 photos of the user and generates 2D images, placing them in various outfits and locations worldwide. === Catheron Gaming === Artisse AI originated from Catheon Gaming, a blockchain gaming and entertainment company founded in 2021 by William Wu. Catheon Gaming published more than 30 Web3 titles in its first year, developed a blockchain game distribution platform, and offered advisory services to external developers. In 2022, HSBC and KPMG listed Catheon Gaming among the "Top 10 Emerging Giants" in the Asia–Pacific region, selected from a pool of more than 6,000 startups. In June 2023, Catheon Gaming was rebranded as Artisse Interactive, creating two divisions: Artisse Gaming, which continued blockchain and Web3 game development, and Artisse AI, which focused on generative photography technology. == Technology == Artisse uses a proprietary generative AI model combined with open-source imaging frameworks and diffusion models. Users are prompted to upload between 15 and 30 personal images, allowing the AI to train a personalized model in 30 to 40 minutes. After training, the app generates new images based on either textual or visual prompts, with options to adjust elements such as clothing, hairstyles, lighting, and backgrounds. To enhance realism, the app integrates augmented reality features and image refinement tools. The company has introduced features to address representation issues related to body shape and skin tone, although concerns persist about the ethical implications of altering personal traits. == Products == === Artisse mobile app === Available on iOS and Android platforms in 35 languages. Users initially receive 25 free images, after which the app adopts a subscription pricing model ranging from approximately $6 to $30 per month. By early 2024, the app reported around 4,000 paying subscribers out of more than 200,000 downloads. === Business and enterprise services === Artisse provides B2B solutions for creating marketing imagery and partners with agencies like Iconic Management to enable cost-effective virtual photoshoots. Additional features in development include virtual try-on capabilities and augmented reality integration for fashion retail. == Reception == Media coverage has noted the app's photorealistic image outputs with some sources highlighting its ease of use. However, concerns have been raised regarding image authenticity, algorithmic biases, and the potential impact on professional photography and modeling. Artisse has been widely covered by media outlets including TechCrunch, PetaPixel, Forbes Australia, and The Evening Standard. These publications discussed the app's integration of generative AI technology within the consumer photography space, its growing market influence, and its rapid adoption by users worldwide.

  Read more →
• 

  Embodied cognitive science

  Embodied cognitive science is an interdisciplinary field of research, the aim of which is to explain the mechanisms underlying intelligent behavior. It comprises three main methodologies: the modeling of psychological and biological systems in a holistic manner that considers the mind and body as a single entity; the formation of a common set of general principles of intelligent behavior; and the experimental use of robotic agents in controlled environments. == Contributors == Embodied cognitive science borrows heavily from embodied philosophy and the related research fields of cognitive science, psychology, neuroscience and artificial intelligence. Contributors to the field include: From the perspective of neuroscience, Gerald Edelman of the Neurosciences Institute at La Jolla, Francisco Varela of CNRS in France, and J. A. Scott Kelso of Florida Atlantic University From the perspective of psychology, Lawrence Barsalou, Michael Turvey, Vittorio Guidano and Eleanor Rosch From the perspective of linguistics, Gilles Fauconnier, George Lakoff, Mark Johnson, Leonard Talmy and Mark Turner From the perspective of language acquisition, Eric Lenneberg and Philip Rubin at Haskins Laboratories From the perspective of anthropology, Edwin Hutchins, Bradd Shore, James Wertsch and Merlin Donald. From the perspective of autonomous agent design, early work is sometimes attributed to Rodney Brooks or Valentino Braitenberg From the perspective of artificial intelligence, Understanding Intelligence by Rolf Pfeifer and Christian Scheier or How the Body Shapes the Way We Think, by Rolf Pfeifer and Josh C. Bongard From the perspective of philosophy, Andy Clark, Dan Zahavi, Shaun Gallagher, and Evan Thompson In 1950, Alan Turing proposed that a machine may need a human-like body to think and speak: It can also be maintained that it is best to provide the machine with the best sense organs that money can buy, and then teach it to understand and speak English. That process could follow the normal teaching of a child. Things would be pointed out and named, etc. Again, I do not know what the right answer is, but I think both approaches should be tried. == Traditional cognitive theory == Embodied cognitive science is an alternative theory to cognition in which it minimizes appeals to computational theory of mind in favor of greater emphasis on how an organism's body determines how and what it thinks. Traditional cognitive theory is based mainly around symbol manipulation, in which certain inputs are fed into a processing unit that produces an output. These inputs follow certain rules of syntax, from which the processing unit finds semantic meaning. Thus, an appropriate output is produced. For example, a human's sensory organs are its input devices, and the stimuli obtained from the external environment are fed into the nervous system which serves as the processing unit. From here, the nervous system is able to read the sensory information because it follows a syntactic structure, thus an output is created. This output then creates bodily motions and brings forth behavior and cognition. Of particular note is that cognition is sealed away in the brain, meaning that mental cognition is cut off from the external world and is only possible by the input of sensory information. == The embodied cognitive approach == Embodied cognitive science differs from the traditionalist approach in that it denies the input-output system. This is chiefly due to the problems presented by the Homunculus argument, which concluded that semantic meaning could not be derived from symbols without some kind of inner interpretation. If some little man in a person's head interpreted incoming symbols, then who would interpret the little man's inputs? Because of the specter of an infinite regress, the traditionalist model began to seem less plausible. Thus, embodied cognitive science aims to avoid this problem by defining cognition in three ways. === Physical attributes of the body === The first aspect of embodied cognition examines the role of the physical body, particularly how its properties affect its ability to think. This part attempts to overcome the symbol manipulation component that is a feature of the traditionalist model. Depth perception, for instance, can be better explained under the embodied approach due to the sheer complexity of the action. Depth perception requires that the brain detect the disparate retinal images obtained by the distance of the two eyes. In addition, body and head cues complicate this further. When the head is turned in a given direction, objects in the foreground will appear to move against objects in the background. From this, it is said that some kind of visual processing is occurring without the need of any kind of symbol manipulation. This is because the objects appearing to move the foreground are simply appearing to move. This observation concludes then that depth can be perceived with no intermediate symbol manipulation necessary. A more poignant example exists through examining auditory perception. Generally speaking the greater the distance between the ears, the greater the possible auditory acuity. Also relevant is the amount of density in between the ears, for the strength of the frequency wave alters as it passes through a given medium. The brain's auditory system takes these factors into account as it process information, but again without any need for a symbolic manipulation system. This is because the distance between the ears for example does not need symbols to represent it. The distance itself creates the necessary opportunity for greater auditory acuity. The amount of density between the ears is similar, in that it is the actual amount itself that simply forms the opportunity for frequency alteration. Thus under consideration of the physical properties of the body, a symbolic system is unnecessary and an unhelpful metaphor. === The body's role in the cognitive process === The second aspect draws heavily from George Lakoff's and Mark Johnson's work on concepts. They argued that humans use metaphors whenever possible to better explain their external world. Humans also have a basic stock of concepts in which other concepts can be derived from. These basic concepts include spatial orientations such as up, down, front, and back. Humans can understand what these concepts mean because they can directly experience them from their own bodies. For example, because human movement revolves around standing erect and moving the body in an up-down motion, humans innately have these concepts of up and down. Lakoff and Johnson contend this is similar with other spatial orientations such as front and back too. As mentioned earlier, these basic stocks of spatial concepts are the basis in which other concepts are constructed. Happy and sad for instance are seen now as being up or down respectively. When someone says they are feeling down, what they are really saying is that they feel sad for example. Thus the point here is that true understanding of these concepts is contingent on whether one can have an understanding of the human body. So the argument goes that if one lacked a human body, they could not possibly know what up or down could mean, or how it could relate to emotional states. [I]magine a spherical being living outside of any gravitational field, with no knowledge or imagination of any other kind of experience. What could UP possibly mean to such a being? While this does not mean that such beings would be incapable of expressing emotions in other words, it does mean that they would express emotions differently from humans. Human concepts of happiness and sadness would be different because human would have different bodies. So then an organism's body directly affects how it can think, because it uses metaphors related to its body as the basis of concepts. === Interaction of local environment === A third component of the embodied approach looks at how agents use their immediate environment in cognitive processing. Meaning, the local environment is seen as an actual extension of the body's cognitive process. The example of a personal digital assistant (PDA) is used to better imagine this. Echoing functionalism (philosophy of mind), this point claims that mental states are individuated by their role in a much larger system. So under this premise, the information on a PDA is similar to the information stored in the brain. So then if one thinks information in the brain constitutes mental states, then it must follow that information in the PDA is a cognitive state too. Consider also the role of pen and paper in a complex multiplication problem. The pen and paper are so involved in the cognitive process of solving the problem that it seems ridiculous to say they are somehow different from the process, in very much the same way the PDA is used for information like the brain. Another example examines how humans control and manipulate their environment

  Read more →
• 

  Lenna

  Lenna (or Lena) is a standard test image used in the field of digital image processing, starting in 1973. It is a picture of the Swedish model Lena Forsén, shot by photographer Dwight Hooker and cropped from the centerfold of the November 1972 issue of Playboy magazine. Lenna has attracted controversy because of its subject matter. Starting in the mid-2010s, many journals have deemed it inappropriate and discouraged its use, while others have banned it from publication outright. Forsén herself has called for it to be retired, saying "It's time I retired from tech." The spelling "Lenna" came from the model's desire to encourage the proper pronunciation of her name. "I didn't want to be called Leena [English: ]," she explained. == History == Before Lenna, the first use of a Playboy magazine image to illustrate image processing algorithms was in 1961. Lawrence G. Roberts used two cropped six-bit grayscale facsimile scanned images from Playboy's July 1960 issue featuring Playmate Teddi Smith, in his master's thesis on image dithering at Massachusetts Institute of Technology. Lenna was originally intended for high resolution color image processing study. Its history was described in the May 2001 newsletter of the IEEE Professional Communication Society, in an article by Jamie Hutchinson: Alexander Sawchuk estimates that it was in June or July of 1973 when he, then an assistant professor of electrical engineering at the University of Southern California Signal and Image Processing Institute (SIPI), along with a graduate student and the SIPI lab manager, was hurriedly searching the lab for a good image to scan for a colleague's conference paper. They got tired of their stock of usual test images, dull stuff dating back to television standards work in the early 1960s. They wanted something glossy to ensure good output dynamic range, and they wanted a human face. Just then, somebody happened to walk in with a recent issue of Playboy. The engineers tore away the top third of the centerfold so they could wrap it around the drum of their Muirhead wirephoto scanner, which they had outfitted with analog-to-digital converters (one each for the red, green, and blue channels) and a Hewlett Packard 2100 minicomputer. The Muirhead had a fixed resolution of 100 lines per inch and the engineers wanted a 512×512 image, so they limited the scan to the top 5.12 inches of the picture, effectively cropping it at the subject's shoulders. The image's reach was limited in the 1970s and 80s, which is reflected in it initially only appearing in .org domains, but in July 1991, the image featured on the cover of Optical Engineering alongside Peppers, another popular test image. This drew the attention of Playboy to the potential copyright infringement. The peak of image hits on the internet was in 1995. The scan became one of the most used images in computer history. The use of the photo in electronic imaging has been described as "clearly one of the most important events in [its] history". The image spread to over 100 different domains, particularly .com and .edu. In a 1999 issue of IEEE Transactions on Image Processing "Lena" was used in three separate articles, and the picture continued to appear in scientific journals throughout the beginning of the 21st century. Lenna is so widely accepted in the image processing community that Forsén was a guest at the 50th annual Conference of the Society for Imaging Science and Technology (IS&T) in 1997. In 2015, Lena Forsén was also guest of honor at the banquet of IEEE ICIP 2015. After delivering a speech, she chaired the best paper award ceremony. To explain why the image became a standard in the field, David C. Munson, editor-in-chief of IEEE Transactions on Image Processing, stated that it was a good test image because of its detail, flat regions, shading, and texture. He also noted that "the Lena image is a picture of an attractive woman. It is not surprising that the (mostly male) image processing research community gravitated toward an image that they found attractive." While Playboy often cracks down on illegal uses of its material and did initially send a notice to the publisher of Optical Engineering about its unauthorized use in that publication, over time it has decided to overlook the wide use of Lena. Eileen Kent, VP of new media at Playboy, said, "We decided we should exploit this, because it is a phenomenon." == Criticism == The use of the image has produced controversy because Playboy is "seen (by some) as being degrading to women". In a 1999 essay on reasons for the male predominance in computer science, applied mathematician Dianne P. O'Leary wrote: Suggestive pictures used in lectures on image processing ... convey the message that the lecturer caters to the males only. For example, it is amazing that the "Lena" pin-up image is still used as an example in courses and published as a test image in journals today. A 2012 paper on compressed sensing used a photo of the model Fabio Lanzoni as a test image to draw attention to this issue. The use of the test image at the magnet school Thomas Jefferson High School for Science and Technology in Fairfax County, Virginia, provoked a guest editorial by a senior in The Washington Post in 2015 about its detrimental impact on aspiring female students in computer science. In 2017, the Journal of Modern Optics published an editorial titled "On alternatives to Lenna" suggesting three images (Pirate, Cameraman, and Peppers) that "are reasonably close to Lenna in feature space". In 2018, the Nature Nanotechnology journal announced that they would no longer consider articles using Lenna. In the same year SPIE, the publishers of Optical Engineering, also announced that they "strongly discourage" the use of Lenna, and would no longer consider new submissions containing the image "without convincing scientific justification for its use". They noted that aside from the copyright and ethical issues, that it was also no longer useful as a standard image: "In today's age of high-resolution digital image technology, it seems difficult to argue that a 512 × 512 image produced with a 1970s-era analog scanner is the best we have to offer as an image quality test standard". Forsén stated in the 2019 documentary film Losing Lena, "I retired from modeling a long time ago. It's time I retired from tech, too... Let's commit to losing me." The Institute of Electrical and Electronics Engineers (IEEE) announced that, starting April 1, 2024, it will no longer allow use of Lenna in its publications.

  Read more →
• 

  Adobe InDesign

  Adobe InDesign is a desktop publishing and page layout designing software application produced by Adobe and first released in 1999. It can be used to create works such as posters, flyers, brochures, magazines, newspapers, presentations, books and ebooks. InDesign can also publish content suitable for tablet devices in conjunction with Adobe Digital Publishing Suite. Graphic designers and production artists are the principal users. InDesign is the successor to PageMaker, which Adobe acquired by buying Aldus Corporation in late 1994. (Freehand, Aldus's competitor to Adobe Illustrator, was licensed from Altsys, the maker of Fontographer.) By 1998, PageMaker had lost much of the professional market to the comparatively feature-rich QuarkXPress version 3.3, released in 1992, and version 4.0, released in 1996. In 1999, Quark announced its offer to buy Adobe and to divest the combined company of PageMaker to avoid problems under United States antitrust law. Adobe declined Quark's offer and continued to develop a new desktop publishing application. Aldus had begun developing a successor to PageMaker, code-named "Shuksan". Later, Adobe code-named the project "K2", and Adobe released InDesign 1.0 in 1999. InDesign exports documents in Adobe's Portable Document Format (PDF) and supports multiple languages. It was the first DTP application to support Unicode character sets, advanced typography with OpenType fonts, advanced transparency features, layout styles, optical margin alignment, and cross-platform scripting with JavaScript. Later versions of the software introduced new file formats. To support the new features, especially typography, introduced with InDesign CS, the program and its document format are not backward-compatible. Instead, InDesign CS2 introduced the INX (.inx) format, an XML-based document representation, to allow backward compatibility with future versions. InDesign CS versions updated with the 3.1 April 2005 update can read InDesign CS2-saved files exported to the .inx format. The InDesign Interchange format does not support versions earlier than InDesign CS. With InDesign CS4, Adobe replaced INX with InDesign Markup Language (IDML), another XML-based document representation. InDesign was the first native Mac OS X publishing software. With the third major version, InDesign CS, Adobe increased InDesign's distribution by bundling it with Adobe Photoshop, Adobe Illustrator, and Adobe Acrobat in Adobe Creative Suite. Adobe developed InDesign CS3 (and Creative Suite 3) as universal binary software compatible with native Intel and PowerPC Macs in 2007, two years after the announced 2005 schedule, inconveniencing early adopters of Intel-based Macs. Adobe CEO Bruce Chizen said, "Adobe will be first with a complete line of universal applications." == File format == The MIME type is not official File Open formats: indd, indl, indt, indb, inx, idml, pmd, xqx New File formats: indd, indl, indb File Save As formats: indd, indt Save file format for InCopy: icma (Assignment file) icml (Content file, Exported file) icap (Package for InCopy) idap (Package for InDesign) File Export formats: pdf, idml, icml, eps, jpg, txt, XML, rtf == Versions == Newer versions can, as a rule, open files created by older versions, but the reverse is not true. Current versions can export the InDesign file as an IDML file (InDesign Markup Language), which can be opened by InDesign versions from CS4 upwards; older versions from CS4 down can export to an INX file (InDesign Interchange format). === Server version === In October 2005, Adobe released InDesign Server CS2, a modified version of InDesign (without a user interface) for Windows and Macintosh server platforms. It does not provide any editing client; rather, it is for use by developers in creating client-server solutions with the InDesign plug-in technology. In March 2007 Adobe officially announced Adobe InDesign CS3 Server as part of the Adobe InDesign family. == Features == Paragraph styles are an essential tool for designers when working with text in Adobe InDesign. Despite their menacing appearance, they are straightforward to operate. Other features that make InDesign a good tool for working with text and paragraphs include: Creating frames and shapes Aligning objects with grids and guides Manipulating objects Organizing objects Importing text Formatting text Spell checking Importing images Parent pages (formerly master pages) Paragraph styles == Internationalization and localization == InDesign Middle Eastern editions have unique settings for laying out Arabic or Hebrew text. They feature: Text settings: Special settings for laying out Arabic or Hebrew text, such as: Ability to use Arabic, Persian or Hindi digits; Use kashidas for letter spacing and full justification; Ligature option; Adjust the position of diacritics, such as vowels of the Arabic script; Justify text in three possible ways: Standard, Arabic, Naskh; Option to insert special characters, including Geresh, Gershayim, Maqaf for Hebrew and Kashida for Arabic texts; Apply standard, Arabic, or Hebrew styles for page, paragraph, and footnote numbering. Bi-directional text flow: Right-to-left behavior applies to several objects: Story, paragraph, character, and table. It allows mixing right-to-left and left-to-right words, paragraphs, and stories in a document. Changing the direction of neutral characters (e.g., / or ?) is possible according to the user's keyboard language. Table of contents: Provides a table of contents titles, one for each supported language. This table is sorted according to the chosen language. InDesign CS4 Middle Eastern versions allow users to select the language of the index title and cross-references. Indices: This allows the creation of a simple keyword index or a somewhat more detailed index of the information in the text using embedded indexing codes. Unlike more sophisticated programs, InDesign cannot insert character style information as part of an index entry (e.g., when indexing book, journal, or movie titles). Indices are limited to four levels (the top level and three sub-levels). Like tables of contents, indices can be sorted according to the selected language. Importing and exporting: Can import QuarkXPress files up to version 4.1 (1999), even using Arabic XT, Arabic Phonyx, or Hebrew XPressWay fonts, retaining the layout and content. Includes 50 import/export filters, including a Microsoft Word 97-98-2000 import filter and a plain text import filter. Exports IDML files can be read by QuarkXPress 2017. Reverse layout: Include a reverse layout feature to reverse the layout of a document when converting a left-to-right document to a right-to-left one or vice versa. Complex script rendering: InDesign supports Unicode character encoding, and Middle Eastern editions support complex text layouts for Arabic and Hebrew complex scripts. The underlying Arabic and Hebrew support is present in the Western editions of InDesign CS4, CS5, CS5.5, and CS6, but the user interface is not exposed, making it difficult to access.

  Read more →
• 

  Apptek

  Applications Technology (AppTek) is a U.S. company headquartered in McLean, Virginia that specializes in artificial intelligence and machine learning for human language technologies. The company provides both managed and professional services for natural language processing (NLP) technologies including automatic speech recognition (ASR), neural machine translation (MT), natural-language understanding (NLU) and neural speech synthesis. AppTek's Head of Science, Prof. Dr. -Ing Hermann Ney, was awarded the IEEE James L. Flanagan Speech and Audio Processing Award in 2019 and the ISCA Medal for Scientific Achievement in 2021 for his work in natural language processing. == History == AppTek was acquired in 1998 by Lernout & Hauspie (at the time a NASDAQ publicly traded company), AppTek organized a management buy-out and went private again in 2001. In 2014, the company sold its hybrid machine translation technology to eBay and has since rebuilt the platform to modern neural-based approaches for machine translation. In 2020, SOSi acquired non-controlling interest in AppTek and became an exclusive reseller of AppTek products for U.S. federal, state, and local government entities.

  Read more →
• 

  Multi-armed bandit

  In probability theory and machine learning, the multi-armed bandit problem (sometimes called the K- or N-armed bandit problem) is named from imagining a gambler at a row of slot machines (sometimes known as "one-armed bandits"), who has to decide which machines to play, how many times to play each machine and in which order to play them, and whether to continue with the current machine or try a different machine. More generally, it is a problem in which a decision maker iteratively selects one of multiple fixed choices (i.e., arms or actions) when the properties of each choice are only partially known at the time of allocation, and may become better understood as time passes. A fundamental aspect of bandit problems is that choosing an arm does not affect the properties of the arm or other arms. Instances of the multi-armed bandit problem include the task of iteratively allocating a fixed, limited set of resources between competing (alternative) choices in a way that minimizes the regret. A notable alternative setup for the multi-armed bandit problem includes the "best arm identification (BAI)" problem where the goal is instead to identify the best choice by the end of a finite number of rounds. The multi-armed bandit problem is a classic reinforcement learning problem that exemplifies the exploration–exploitation tradeoff dilemma. In contrast to general reinforcement learning, the selected actions in bandit problems do not affect the reward distribution of the arms. The multi-armed bandit problem also falls into the broad category of stochastic scheduling. In the problem, each machine provides a random reward from a probability distribution specific to that machine, that is not known a priori. The objective of the gambler is to maximize the sum of rewards earned through a sequence of lever pulls. The crucial tradeoff the gambler faces at each trial is between "exploitation" of the machine that has the highest expected payoff and "exploration" to get more information about the expected payoffs of the other machines. The trade-off between exploration and exploitation is also faced in machine learning. In practice, multi-armed bandits have been used to model problems such as managing research projects in a large organization, like a science foundation or a pharmaceutical company. In early versions of the problem, the gambler begins with no initial knowledge about the machines. Herbert Robbins in 1952, realizing the importance of the problem, constructed convergent population selection strategies in "some aspects of the sequential design of experiments". A theorem, the Gittins index, first published by John C. Gittins, gives an optimal policy for maximizing the expected discounted reward. == Empirical motivation == The multi-armed bandit problem models an agent that simultaneously attempts to acquire new knowledge (called "exploration") and optimize their decisions based on existing knowledge (called "exploitation"). The agent attempts to balance these competing tasks in order to maximize their total value over the period of time considered. There are many practical applications of the bandit model, for example: clinical trials investigating the effects of different experimental treatments while minimizing patient losses, adaptive routing efforts for minimizing delays in a network, financial portfolio design In these practical examples, the problem requires balancing reward maximization based on the knowledge already acquired with attempting new actions to further increase knowledge. This is known as the exploitation vs. exploration tradeoff in machine learning. The model has also been used to control dynamic allocation of resources to different projects, answering the question of which project to work on, given uncertainty about the difficulty and payoff of each possibility. Originally considered by Allied scientists in World War II, it proved so intractable that, according to Peter Whittle, the problem was proposed to be dropped over Germany so that German scientists could also waste their time on it. The version of the problem now commonly analyzed was formulated by Herbert Robbins in 1952. == The multi-armed bandit model == The multi-armed bandit (short: bandit or MAB) can be seen as a set of real distributions B = { R 1 , … , R K } {\displaystyle B=\{R_{1},\dots ,R_{K}\}} , each distribution being associated with the rewards delivered by one of the K ∈ N + {\displaystyle K\in \mathbb {N} ^{+}} levers. Let μ 1 , … , μ K {\displaystyle \mu _{1},\dots ,\mu _{K}} be the mean values associated with these reward distributions. The gambler iteratively plays one lever per round and observes the associated reward. The objective is to maximize the sum of the collected rewards. The horizon H {\displaystyle H} is the number of rounds that remain to be played. The bandit problem is formally equivalent to a one-state Markov decision process. The regret ρ {\displaystyle \rho } after T {\displaystyle T} rounds is defined as the expected difference between the reward sum associated with an optimal strategy and the sum of the collected rewards: ρ = T μ ∗ − ∑ t = 1 T r ^ t {\displaystyle \rho =T\mu ^{}-\sum _{t=1}^{T}{\widehat {r}}_{t}} , where μ ∗ {\displaystyle \mu ^{}} is the maximal reward mean, μ ∗ = max k { μ k } {\displaystyle \mu ^{}=\max _{k}\{\mu _{k}\}} , and r ^ t {\displaystyle {\widehat {r}}_{t}} is the reward in round t {\displaystyle t} . A zero-regret strategy is a strategy whose average regret per round ρ / T {\displaystyle \rho /T} tends to zero with probability 1 when the number of played rounds tends to infinity. Intuitively, zero-regret strategies are guaranteed to converge to a (not necessarily unique) optimal strategy if enough rounds are played. == Variations == A common formulation is the Binary multi-armed bandit or Bernoulli multi-armed bandit, which issues a reward of one with probability p {\displaystyle p} , and otherwise a reward of zero. Another formulation of the multi-armed bandit has each arm representing an independent Markov machine. Each time a particular arm is played, the state of that machine advances to a new one, chosen according to the Markov state evolution probabilities. There is a reward depending on the current state of the machine. In a generalization called the "restless bandit problem", the states of non-played arms can also evolve over time. There has also been discussion of systems where the number of choices (about which arm to play) increases over time. Computer science researchers have studied multi-armed bandits under worst-case assumptions, obtaining algorithms to minimize regret in both finite and infinite (asymptotic) time horizons for both stochastic and non-stochastic arm payoffs. === Best arm identification === An important variation of the classical regret minimization problem in multi-armed bandits is best arm identification (BAI), also known as pure exploration. This problem is crucial in various applications, including clinical trials, adaptive routing, recommendation systems, and A/B testing. In BAI, the objective is to identify the arm having the highest expected reward. An algorithm in this setting is characterized by a sampling rule, a decision rule, and a stopping rule, described as follows: Sampling rule: ( a t ) t ≥ 1 {\displaystyle (a_{t})_{t\geq 1}} is a sequence of actions at each time step Stopping rule: τ {\displaystyle \tau } is a (random) stopping time which suggests when to stop collecting samples Decision rule: a ^ τ {\displaystyle {\hat {a}}_{\tau }} is a guess on the best arm based on the data collected up to time τ {\displaystyle \tau } There are two predominant settings in BAI: Fixed budget setting: Given a time horizon T ≥ 1 {\displaystyle T\geq 1} , the objective is to identify the arm with the highest expected reward a ⋆ ∈ arg ⁡ max k μ k {\displaystyle a^{\star }\in \arg \max _{k}\mu _{k}} minimizing probability of error δ {\displaystyle \delta } . Fixed confidence setting: Given a confidence level δ ∈ ( 0 , 1 ) {\displaystyle \delta \in (0,1)} , the objective is to identify the arm with the highest expected reward a ⋆ ∈ arg ⁡ max k μ k {\displaystyle a^{\star }\in \arg \max _{k}\mu _{k}} with the least possible amount of trials and with probability of error P ( a ^ τ ≠ a ⋆ ) ≤ δ {\displaystyle \mathbb {P} ({\hat {a}}_{\tau }\neq a^{\star })\leq \delta } . For example using a decision rule, we could use m 1 {\displaystyle m_{1}} where m {\displaystyle m} is the machine no.1 (you can use a different variable respectively) and 1 {\displaystyle 1} is the amount for each time an attempt is made at pulling the lever, where ∫ ∑ m 1 , m 2 , ( . . . ) = M {\displaystyle \int \sum m_{1},m_{2},(...)=M} , identify M {\displaystyle M} as the sum of each attempts m 1 + m 2 {\displaystyle m_{1}+m_{2}} , (...) as needed, and from there you can get a ratio, sum or mean as quantitative probability and sample your formulation for each slots. You can also do ∫ ∑ k ∝ i N − (

  Read more →
• 

  Harmony (software)

  Harmony is a Java-based software for creating high-definition music videos with 2D and 3D animations. The application was developed by Digital Chaotics, a company based in San Jose, California and established in 2010 by Ken and Leanna Scott. == History == During a March 1, 2011 interview published by The LIST magazine, Ken explained how he initially got into music and digital entertainment. According to Scott: “I came at it from both the art and the technology side. … I built one of the first digital audio synthesizers as an undergrad project back in 1979. It was a short jump from there to creating visuals with computers, too.” Taking inspiration from Fantasia – which Scott calls, “The greatest music video of all time” – he began writing software code for Harmony in late 2009, finishing the project in mid-2010. However, Scott has also said that the idea for Harmony began much earlier: I read a book in 1978 called Digital Harmony, by John H Whitney, Sr. (Interestingly, he was the father of the president of Digital Productions.) He said that there was a kind of visual art based on motion, and proposed theories about the underlying mathematical structure of visual harmony. So there's the book, combined with my desire to create art with computers-add a taste or two of things commonly used by college students during the 70's - and lots of Pink Floyd. Add it all up, and the seeds for Harmony were planted. My friends in school and at Floating Point Systems listened to me ranting about "making music videos with computers" incessantly. I'm sure it was both maddening and fascinating to see. == Features == Harmony runs on Windows 7 and Windows Vista. Currently, Digital Chaotics does not offer a macOS or Linux platform for the software. However, Harmony can be run on these platforms by running it on Windows in a virtual machine. == Harmony 2 == On November 1, 2011, Digital Chaotics released the 2.0 version of the Harmony software. Unlike the original version, the second release featured three product levels: Harmony 2 Express, Harmony 2 Pro, and Harmony 2 Extreme. The "Express" version was positioned as an entry-level, free release to allow users a chance to "test-drive" the software. The "Pro" version currently retails at $197, while the "Extreme" is priced at $397. These two versions, aimed more towards VJ and Fulldome theater usage, featured additional software capability and features such as higher resolution, more video formatting options, and more camera angles.

  Read more →
• 

  Amira (software)

  Amira (ah-MEER-ah) is a software platform for visualization, processing, and analysis of 3D and 4D data. It is being actively developed by Thermo Fisher Scientific in collaboration with the Zuse Institute Berlin (ZIB), and commercially distributed by Thermo Fisher Scientific — together with its sister software Avizo. == Overview == Amira is an extendable software system for scientific visualization, data analysis, and presentation of 3D and 4D data. It is used by researchers and engineers in academia and industry. It is a tool for processing, analysis and visualization of data from various modalities; e.g. micro-CT, PET, Ultrasound. It is used in many fields, such as microscopy in biology and materials science, molecular biology, quantum physics, astrophysics, computational fluid dynamics (CFD), finite element modeling (FEM), non-destructive testing (NDT), and many more. One of the key features, besides data visualization, is Amira's set of tools for image segmentation and geometry reconstruction. This allows the user to mark (or segment) structures and regions of interest in 3D image volumes using automatic, semi-automatic, and manual tools. The segmentation can then be used for a variety of subsequent tasks, such as volumetric analysis, density analysis, shape analysis, or the generation of 3D computer models for visualization, numerical simulations, or rapid prototyping or 3D printing. Other key Amira features are multi-planar and volume visualization, image registration, filament tracing, cell separation and analysis, tetrahedral mesh generation, fiber-tracking from diffusion tensor imaging (DTI) data, skeletonization, spatial graph analysis, and stereoscopic rendering of 3D data over multiple displays and immersive virtual reality environments, including CAVEs. As a commercial product Amira requires the purchase of a license or an academic subscription. A time-limited, but full-featured evaluation version is available for download free of charge. == History == === 1993–1998: Research software === Amira's roots go back to 1993 and the Department for Scientific Visualization, headed by Hans-Christian Hege at the Zuse Institute Berlin (ZIB). The ZIB is a research institute for mathematics and informatics. The Scientific Visualization department's mission is to help solve computationally and scientifically challenging tasks in medicine, biology, engineering and materials science. For this purpose, it develops algorithms and software for 2D, 3D, and 4D data visualization and visually supported exploration and analysis. At that time, the young visualization group at the ZIB had experience with the extendable, data flow-oriented visualization environments apE, IRIS Explorer, and Advanced Visualization Studio (AVS), but was not satisfied with these products' interactivity, flexibility, and ease-of-use for non-computer scientists. Therefore, the development of a new software system was started in a research project within a medically oriented, multi-disciplinary collaborative research center. Based on experiences that Tobias Höllerer had gained in late 1993 with the new graphics library IRIS Inventor, it was decided to utilize that library. The development of the medical planning system was performed by Detlev Stalling, who later became the chief software architect of Amira. The new software was called "HyperPlan", highlighting its initial target application – a planning system for hyperthermia cancer treatment. The system was being developed on Silicon Graphics (SGI) computers, which at the time were the standard workstations used for high-end graphics computing. The software was based on libraries such as OpenGL (originally IRIS GL), Open Inventor (originally IRIS Inventor), and the graphical user interface libraries X11, Motif (software), and ViewKit. In 1998, X11/Motif/Viewkit were replaced by the Qt toolkit. The HyperPlan framework served as the base for more and more projects at the ZIB and was used by a growing number of researchers in collaborating institutions. The projects included applications in medical image computing, medical visualization, neurobiology, confocal microscopy, flow visualization, molecular analytics and computational astrophysics. === 1998–today: Commercially supported product === The growing number of users of the system started to exceed the capacities that ZIB could spare for software distribution and support, as ZIB's primary mission was algorithmic research. Therefore, the spin-off company Indeed – Visual Concepts GmbH was founded by Hans-Christian Hege, Detlev Stalling, and Malte Westerhoff. In Feb 1998 the HyperPlan software was given the new, application-neutral name "Amira". This name is not an acronym, but was chosen for being pronounceable in different languages and providing a suitable connotation, namely "to look at" or "to wonder at", from the Latin verb "admirare" (to admire), which reflects a basic situation in data visualization. A major re-design of the software was undertaken by Detlev Stalling and Malte Westerhoff in order to make it a commercially supportable product and to make it available on non-SGI computers as well. In March 1999, the first version of the commercial Amira was exhibited at the CeBIT tradeshow in Hannover, Germany on SGI IRIX and Hewlett-Packard UniX (HP-UX) booths. Versions for Linux and Microsoft Windows followed within the following twelve months. Later Mac OS X support was added. Indeed – Visual Concepts GmbH selected the Bordeaux, France and San Diego, United States based company TGS, Inc. as the worldwide distributor for Amira and completed five major releases (up to version 3.1) in the subsequent four years. In 2003 both Indeed – Visual Concepts GmbH, as well as TGS, Inc. were acquired by Massachusetts-based Mercury Computer Systems, Inc. (NASDAQ:MRCY) and became part of Mercury's newly formed life sciences business unit, later branded Visage Imaging. In 2009, Mercury Computer Systems, Inc. spun off Visage Imaging again and sold it to Melbourne, Australia based Promedicus Ltd (ASX:PME), a leading provider of radiology information systems and medical IT solutions. During this time, Amira continued to be developed in Berlin, Germany and in close collaboration with the ZIB, still headed by the original creators of Amira. TGS, located in Bordeaux, France was sold by Mercury Computer systems to a French investor and renamed to Visualization Sciences Group (VSG). VSG continued the work on a complementary product named Avizo, based on the same source code but customized for material sciences. In August 2012, FEI, to that date the largest OEM reseller of Amira, purchased VSG and the Amira business from Promedicus. This brought the two software sisters Amira and Avizo back into one hand. In August 2013, Visualization Sciences Group (VSG) became a business unit of FEI. In 2016 FEI has been bought by Thermo Fisher Scientific and became part of its Materials & Structural Analysis division in early 2017. Amira and Avizo are still being marketed as two different products; Amira for life sciences and Avizo for materials science, but the development efforts are now joined once again. In the meantime, the number of scientific articles using the Amira / Avizo software, is in the order of 10 thousands. == Amira options == === Microscopy option === Specific readers for microscopy data Image deconvolution Exploration of 3D imagery obtained from virtually any microscope Extraction and editing of filament networks from microscopy images === DICOM reader === Import of clinical and preclinical data in DICOM format === Mesh option === Generation of 3D finite element (FE) meshes from segmented image data Support for many state-of-the-art FE solver formats High-quality visualization of simulation mesh-based results, using scalar, vector, and tensor field display modules === Skeletonization option === Reconstruction and analysis of neural and vascular networks Visualization of skeletonized networks Length and diameter quantification of network segments Ordering of segments in a tree graph Skeletonization of very large image stacks === Molecular option === Advanced tools for the visualization of molecule models Hardware-accelerated volume rendering Powerful molecule editor Specific tools for complex molecular visualization === Developer option === Creation of new custom components for visualizing or data processing Implementation of new file readers or writers C++ programming language Development wizard for getting started quickly === Neuro option === Medical image analysis for DTI and brain perfusion Fiber tracking supporting several stream-line based algorithms Fiber separation into fiber bundles based on user defined source and destination regions Computation of tensor fields, diffusion weighted maps Eigenvalue decomposition of tensor fields Computation of mean transit time, cerebral blood flow, and cerebral blood volume === VR option === Visualization of data on large tiled displays

  Read more →