AI For Student Recruitment

AI For Student Recruitment — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Double descent

    Double descent

    Double descent in statistics and machine learning is the phenomenon where a model's error rate on the test set initially decreases with the number of parameters, then peaks, then decreases again. This phenomenon has been considered surprising, as it contradicts assumptions about overfitting in classical machine learning. The increase usually occurs near the interpolation threshold, where the number of parameters is the same as the number of training data points (the model is just large enough to fit the training data). Or, more precisely, it is the maximum number of samples on which the model/training procedure achieves approximately on average 0 training error. == History == Early observations of what would later be called double descent in specific models date back to 1989. The term "double descent" was coined by Belkin et. al. in 2019, when the phenomenon gained popularity as a broader concept exhibited by many models. The latter development was prompted by a perceived contradiction between the conventional wisdom that too many parameters in the model result in a significant overfitting error (an extrapolation of the bias–variance tradeoff), and the empirical observations in the 2010s that some modern machine learning techniques tend to perform better with larger models. == Theoretical models == Double descent occurs in linear regression with isotropic Gaussian covariates and isotropic Gaussian noise. A model of double descent at the thermodynamic limit has been analyzed using the replica trick, and the result has been confirmed numerically. A number of works have suggested that double descent can be explained using the concept of effective dimension: While a network may have a large number of parameters, in practice only a subset of those parameters are relevant for generalization performance, as measured by the local Hessian curvature. This explanation is formalized through PAC-Bayes compression-based generalization bounds, which show that less complex models are expected to generalize better under a Solomonoff prior.

    Read more →
  • The Best Free AI Video Generator for Beginners

    The Best Free AI Video Generator for Beginners

    Trying to pick the best AI video generator? An AI video generator is software that uses machine learning to help you get more done — it scales effortlessly from a single task to thousands. The best picks balance beginner-friendly simplicity with the depth power users need, and they ship updates often. Whether you are a beginner or a pro, the right AI video generator slots into your workflow and pays for itself fast. Read on for hands-on impressions, pricing tiers, and the standout features that matter.

    Read more →
  • Best AI Website Builders in 2026

    Best AI Website Builders in 2026

    Comparing the best AI website builder? An AI website builder is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI website builder slots into your workflow and pays for itself fast. Below we compare features, pricing, and real output so you can choose with confidence.

    Read more →
  • Zoubin Ghahramani

    Zoubin Ghahramani

    Zoubin Ghahramani FRS (Persian: زوبین قهرمانی; born 8 February 1970) is a British-Iranian machine learning and AI researcher, Vice President of Research at Google DeepMind and Professor of Information Engineering at the University of Cambridge. He has been a Fellow of St John's College, Cambridge since 2009. He held appointments at University College London from 1998 to 2005 and was Associate Research Professor in the Machine Learning Department at Carnegie Mellon University from 2003 to 2012. He was the Chief Scientist of Uber from 2016 until 2020. He joined Google Brain in 2020 as Senior Research Director, becoming a VP of Research in 2021, and heading Google Brain until its merger with DeepMind to form Google DeepMind. He was a founding Cambridge Liaison Director of the Alan Turing Institute and also founding Deputy Director of the Leverhulme Centre for the Future of Intelligence. Ghahramani contributed to the Royal Society's Machine Learning Report in 2017 and led the UK's Future of Compute Review, in 2023. == Education == Ghahramani was educated at the American School of Madrid in Spain and the University of Pennsylvania where he was awarded a dual degree in Cognitive Science and Computer Science in 1990. He obtained his Ph.D. in Cognitive Neuroscience from the Department of Brain and Cognitive Sciences at the Massachusetts Institute of Technology, supervised by Michael I. Jordan and Tomaso Poggio. == Research and career == Following his Ph.D., Ghahramani moved to the University of Toronto in 1995 as a Postdoctoral Fellow in the Artificial Intelligence Lab, working with Geoffrey Hinton. From 1998 to 2005, he was a member of the faculty at the Gatsby Computational Neuroscience Unit, University College London. Ghahramani has made significant contributions in the areas of Bayesian machine learning (particularly variational methods for approximate Bayesian inference), as well as graphical models and computational neuroscience. His current research focuses on nonparametric Bayesian modelling and statistical machine learning. He has also worked on artificial intelligence, information retrieval, bioinformatics and statistics which provide the mathematical foundations for handling uncertainty, making decisions, and designing learning systems. He has published over 300 papers, receiving over 100,000 citations (an h-index of 132). He co-founded Geometric Intelligence in 2014, with Gary Marcus, Doug Bemis, and Ken Stanley, which was acquired by Uber in 2016. Afterwards, he transferred to Uber's AI Labs in 2016, and later became VP of AI and Chief Scientist at Uber. In 2020 he joined Google and became VP of Research and head of Google Brain in 2021 until its merger with DeepMind in April 2023. == Awards and honors == Ghahramani was elected Fellow of the Royal Society (FRS) in 2015. His certificate of election reads: Zoubin Ghahramani is a world leader in the field of machine learning, significantly advancing the state-of-the-art in algorithms that can learn from data. He is known in particular for fundamental contributions to probabilistic modeling and Bayesian nonparametric approaches to machine learning systems, and to the development of approximate variational inference algorithms for scalable learning. He is one of the pioneers of semi-supervised learning methods, active learning algorithms, and sparse Gaussian processes. His development of novel infinite dimensional nonparametric models, such as the infinite latent feature model, has been highly influential.He was awarded the Royal Society Milner Award in 2021 in recognition of 'his fundamental contributions to probabilistic machine learning'.

    Read more →
  • Genigraphics

    Genigraphics

    Genigraphics is a large-format printing service bureau specializing in providing poster session services to medical and scientific conferences throughout the US and Canada. The company began in 1973 as a division of General Electric. == History == Genigraphics began as a computer graphics system, developed by General Electric in the late 1960s, for NASA to use in space flight simulation. The technologies thus developed provided a foundation for the company's expansion into the commercial market. The Computed Images System & Services division (CISS, to become Genigraphics Corporation) of GE delivered the first presentation graphics system to Amoco Oil's corporate headquarters in 1973. It was named the 100 Series, and was based on DEC's PDP 11 series of mini computer systems. The first Genigraphics systems (100 Series and 100A Series) used an array of buttons, dials, knobs and joysticks, along with a built in keyboard, as the means of user interface. The PDP-11/40 computer was housed in a tall cabinet and used random access magnetic tape drives (DECtape) for storing completed presentations. The graphics generator (Forox recorder) was capable of outputting 2,000 line resolution, suitable for 35mm and 72mm film and large sheet film positive using larger cassettes for recording. 4000 and 8000 line resolution was later achieved with duplex scanning and 4x scanning by modifying to the Forox recorder's settings menu. Subsequent models (100B,C,D,D+ and D+/GVP) replaced the knobs and dials with an on screen, text based menu system, a graphics tablet and a pen. The pen/tablet combination gave way to a mouse like device in later models, and served to provide the interface with the graphics tools. User interaction with the computer for functions such as media initialization or modem to modem data transfer required a DECwriter serial terminal. In 1982, GE divested the Genigraphics division along with a host of other "non essential" business units (Genitext, Geniponics) and Genigraphics Corporation was born. Shortly after the divestiture, the headquarters of Genigraphics was moved from Liverpool, New York to Saddle Brook, New Jersey. Major success followed as the company grew exponentially over the next few years selling both systems and slide creation services. Genigraphics film recorders produced high-resolution digital images on 35mm film. The computer-generated scenes for The Last Starfighter were calculated on a Cray X-MP supercomputer and mastered with a Genigraphics film recorder. At its peak, Genigraphics Corporation employed roughly 300 people in 24 offices worldwide, with revenues upwards of $70 million annually. By the late 1980s Genigraphics saw demand for its proprietary systems dwindle and began selling the MASTERPIECE 8770 film recorder and GRAFTIME software as a peripheral for DEC Vaxes, IBM PC AT’s, and Mac NuBus machines. But the MASTERPIECE film recorder proved too expensive to sell in volume. In 1988, the company began a partnership with Microsoft to help develop the PowerPoint software. In exchange, every copy of PowerPoint included a “Send to Genigraphics” link to have files sent to a Genigraphics service bureau to be produced as 35mm slides. This partnership continued until 2001. In 1989, after three years of flat revenue, Genigraphics sold its hardware business in order to focus on its service bureau business and partnership with Microsoft via PowerPoint. In 1994, all assets of Genigraphics, including equipment, software development, in-house artwork, trademarks, and rights to the Microsoft partnership, were sold to InFocus Corporation of Wilsonville, Oregon who continued to operate under the Genigraphics brand name. The twenty-four service bureaus were consolidated to a 20,000 square foot facility next to the FedEx hub in Memphis, Tennessee. This allowed PowerPoint slide orders to be received until 10pm and delivered across the United States by the following morning. In 1995, InFocus registered www.genigraphics.com and was among the first to offer a form of ecommerce allowing 35mm slides, color prints and transparencies, printed booklets, and digital projectors to be purchased online. In 1998, then current management bought Genigraphics from InFocus and have operated it continuously ever since as Genigraphics LLC. That same year, InFocus projector rentals were added to the “Send to Genigraphics” link in PowerPoint and Genigraphics became the rental and repair center for all InFocus national accounts. It also marked Genigraphics entry into the new industry of large format printing; leveraging their knowledge of, and access to, PowerPoint programming code to develop a proprietary printer driver to output directly to an Epson 9500 wide format printer. At the time, Genigraphics was the exclusive 35mm slide vendor for all Kinko’s stores in the United States and poster printing was added to the arrangement. In 2003, Genigraphics closed their 35mm slide E6 photo lab – one of the last high-volume commercial E6 labs in the US – and expanded their large format printing capabilities. Since 2003, Genigraphics has become a major player in the poster session market, providing printing and on-site services to medical and scientific conferences throughout the US and Canada. As of February 2019, over 150,000 medical or scientific ‘ePosters’ are made available through their ResearchPosters.com archive service. === Partnership with Microsoft and development of PowerPoint === As presentations began to be created on personal computers in the late 80’s, Genigraphics sought presentation software partners in Silicon Valley who would be interested in sending files to Genigraphics via dial-up modem to be produced on 35mm slides. In 1987, Michael Beetner, Director of Marketing Planning for Genigraphics, met with Robert Gaskins, head of Microsoft's Graphics Business Unit, who was leading the development of the newly released PowerPoint software. A joint development agreement between Microsoft and Genigraphics was agreed upon and announced at Mac World 1988. According to Erica Robles-Anderson and Patrik Svensson, "It would be hard to overestimate Genigraphics’ influence on PowerPoint. PowerPoint 2.0 was designed for Genigraphics film recorders. It shipped with Genigraphics color palettes, schemes, and the distinctively Genigraphics color-gradient backgrounds. The application contained a ‘Send to Genigraphics’ menu item that wrote the presentation to floppy disk or transmitted the order directly via modem. Within three and a half months PowerPoint orders accounted for ten percent of revenue at Genigraphics service centers. PowerPoint 3.0 was even more intimately dependent upon Genigraphics. The software incorporated a collection of clip art images and symbols that had been produced by hundreds of artists at dozens of service centers across tens of thousands of presentations. Genigraphics artists designed PowerPoint 3.0 colors, templates, and sample presentations. The software even used Genigraphics (rather than Excel) chart style. Bar charts were rendered two-dimensionally with apparent thickness added to make them seemingly recede from the axes. The technique made it easier for viewers to compare bar heights and estimate values from axis ticks and labels. Pie charts were handled analogously. Microsoft paid Genigraphics to produce more than 500 clip art drawings and symbols used in Microsoft programs.” In exchange for Genigraphics development efforts, Microsoft included a “Send to Genigraphics” link in every copy of PowerPoint through the 10.0 version (2000/2001). The arrangement came to an end when Microsoft restructured as a result of anti-trust lawsuits.

    Read more →
  • CarPlay

    CarPlay

    CarPlay is an Apple standard that enables a car radio or automotive head unit to be a display and controller for an iOS device. It is available on iPhone 5 and later models running iOS 7.1 or later. More than 800 car and motorcycle models support CarPlay, according to Apple. Vehicle owners can add support by installing certain aftermarket vehicle audio products. Most CarPlay systems connect to iOS through USB, some are wireless, and wireless support can be added through aftermarket dongles. CarPlay Ultra, a more integrated version of CarPlay, was first announced on Aston Martin DBX707 in May 2025. == Software == Apple's CarPlay-enabled apps include: Phone Apple Music Apple Maps Calendar Messages Audiobooks (part of Apple Books) Podcasts Settings News Developers must obtain permission from Apple to develop CarPlay-enabled apps. Such apps fall into five categories: Audio: primarily provide audio content, such as music or podcasts. Examples: Amazon Music, Audible, Google Play Music, iHeartRadio, QQ Music, Spotify, and Overcast. Navigation: turn-by-turn guidance, including searching for points of interests and navigating to a destination. Examples: AutoNavi, Baidu Maps, Google Maps, ChargeFinder and Waze. Automaker-made apps allow a user to control vehicle-specific features such as climate controls, gas levels, or radio via CarPlay. Messaging/Voice over IP (VoIP): listen to new messages and reply using dictation in an audio-only interface. Messaging apps on CarPlay integrate with third-party Siri support (known as SiriKit), while VoIP apps integrate with the iOS calling interface using CallKit. Examples: Telegram, WhatsApp, and Zoom. Food-ordering and parking-services apps. To discourage distracted driving, Siri is used extensively, providing voice turn-by-turn navigation guidance and voice-input for text messages. Newscast-style weather and stock results are announced instead of displayed. Requests that bring up visual information may be blocked when the car is in gear, and most native CarPlay apps deliver audio content with minimal interaction. CarPlay-enabled apps installed on the device appear on the CarPlay home screen unless disabled by the user. The inclusion or exclusion and order of app appearance can be changed on a per-vehicle basis. == Hardware == Most of the CarPlay software runs on the connected iPhone. The CarPlay interface provides audio output and a visual display to the vehicle's infotainment system, while adapting to the vehicle's available control methods, including touch screens, rotary dials, physical buttons, steering-wheel controls, and hands-free microphones. Aftermarket head units may support CarPlay or Android Auto, and many support both platforms. === Wired CarPlay === In a wired CarPlay configuration, the iPhone connects to the vehicle or head unit via a USB cable. The USB connection supplies power to the iPhone and provides a stable data link for audio, video, and control input. Wired CarPlay is supported by a wide range of factory-installed infotainment systems and aftermarket head units. Some third-party devices marketed as wireless CarPlay adapters operate by emulating a wired CarPlay connection to the vehicle. These devices plug into the vehicle's USB port and present themselves as a wired CarPlay interface, while separately establishing a wireless connection to the iPhone. Such devices still require the vehicle or head unit to support standard (wired) CarPlay. === Wireless CarPlay === Wireless CarPlay allows the iPhone to connect to a compatible vehicle or head unit without a physical cable. During the initial pairing process, the iPhone exchanges network credentials with the CarPlay receiver over Bluetooth. Once paired, CarPlay data is transmitted over a two-way Wi-Fi connection between the phone and the vehicle. Wireless CarPlay support depends on both the vehicle or head unit hardware and the iPhone model, and is generally limited to newer factory systems and select aftermarket receivers. == History == === Predecessor === In 2008, one year after the release of the iPhone, Mercedes vehicles were first to sell an audio system incorporating both the iPod and iPhone, equipped with 30-pin iOS input jacks. The new 2008 Harman Kardon NTG 2.5 featured full audio streaming, syncing, charging and control integrated into the steering wheel controls, instrument panel, and head unit. Apple was working with Mercedes to develop iOS compatible audio systems into their cars first only a year after iPhone launch. With an Apple Lightning-to-30-pin adapter, iPhones/iPods remain backwards-compatible with the Harman Kardon 2.5 and later models. This is the earliest audio system specifically engineered for iPod/iPhone integration, which predated CarPlay and every other manufacturer incorporating iOS into vehicles. The concept of CarPlay was based on the iOS 4 feature called "iPod Out" which was produced through several years of joint development by Apple and the BMW Group's Technology Office USA. iPod Out enabled vehicles with the necessary infrastructure to "host" the analog video and audio from a supporting iOS device while receiving inputs, such as button presses and knob rotations, from a car's infotainment system, to drive the "hosted" user interface in the vehicle's built-in display. It was announced at WWDC 2010 and first shipped in BMW Group vehicles in early 2011. The BMW and Mini option was called "PlugIn" and paved the way for the first cross-OEM platforms, introducing the concept of requiring a car-specific interface for apps (as opposed to MirrorLink's simple and insufficient mirroring of what was shown on the smartphone's screen). === Development === CarPlay's codename was Stark. Apple's Eddy Cue announced it as iOS in the Car at WWDC 2013. In January 2014, it was reported that Apple's hardware-oriented corporate culture had led to release delays. iOS in the Car was then rebranded and launched as CarPlay with significant design changes at the Geneva Motor Show in March 2014 with Ferrari, Kia, Mercedes-Benz, and Volvo among the first car manufacturers. At WWDC 2022, Apple announced plans to release an all-new version of CarPlay, informally dubbed CarPlay 2. The new version was said to be able to control vehicle functions, access vehicle stats, and take over multiple vehicle screens. Officials said they planned to release it in late 2024 and that manufacturers that are planning to adopt the new CarPlay include: Audi, Acura, Ford, Honda, Infiniti, Jaguar, Land Rover, Lincoln, Mercedes-Benz, Nissan, Polestar, Porsche, Renault, and Volvo. In January 2025, amidst delays, Apple removed the planned released date from its website. On May 15, 2025, Apple announced that next-generation CarPlay, now called CarPlay Ultra, would be included with all new vehicles from Aston Martin. Existing vehicles will also be receiving CarPlay Ultra through a future software update. It is only available in the US and Canada. == Timeline == June 2013: Apple introduced iOS in the Car; an early version of CarPlay that was never publicly released, at WWDC 2013. June 2013: BMW officials announced their cars would not support iOS in the Car; they later changed their minds. November 2013: Siri Eyes Free mode was offered as a dealer-installed accessory in the US to some Honda Accord and Acura RDX & ILX models. In December, Honda offered additional integration, featuring new HondaLink services, on some US and Canada models of the Civic and the Fit. March 2014: Apple introduced CarPlay, which was renamed from iOS in the Car with significant design changes, at the 2014 Geneva Motor Show with automakers Ferrari, Mercedes-Benz and Volvo. September 2014: A Ferrari FF was the first car with a full version of CarPlay. November 2014: Hyundai announced the Sonata sedan would be their first model with available CarPlay by the end of the first quarter of 2015. January 2015: Volkswagen announced CarPlay support would be coming later in 2015 and would be either standard or available on the majority of their 2016 model year lineup. May 2015: General Motors announced CarPlay would be available starting with 14 different 2016 model year Chevrolet vehicles. July 2015: Honda announced CarPlay would be available in their vehicles starting with the 2016 Honda Accord. December 2015: Volvo implemented CarPlay in the 2016 Volvo XC90 as their first vehicle with CarPlay support. December 2015: Mercedes-Benz confirmed that CarPlay would be available starting with select 2016 model year vehicles. January 2016: Apple released a list detailing the car models which support CarPlay. January 2016: Ford announced CarPlay would be available on all 2017 Ford/Lincoln model year vehicles equipped with the Sync 3 infotainment system. January 2016: FCA (now a part of Stellantis) announced CarPlay would be available on their UConnect infotainment system starting with select 2016 model year vehicles. March 2016: Subaru announced the beginning of CarPlay and Android Auto support, st

    Read more →
  • Best AI Code Generators in 2026

    Best AI Code Generators in 2026

    Comparing the best AI code generator? An AI code generator is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI code generator slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.

    Read more →
  • Laws of Form

    Laws of Form

    Laws of Form (hereinafter LoF) is a book by G. Spencer-Brown, written by August 1967 and published in 1969. The book straddles the boundary between mathematics and philosophy. LoF describes three distinct logical systems: The primary arithmetic (described in Chapter 4 of LoF), whose models include Boolean arithmetic; The primary algebra (Chapter 6 of LoF), whose models include the two-element Boolean algebra (hereinafter abbreviated 2), Boolean logic, and the classical propositional calculus; Equations of the second degree (Chapter 11), whose interpretations include finite automata and Alonzo Church's Restricted Recursive Arithmetic (RRA). "Boundary algebra" is a Meguire (2011) term for the union of the primary algebra and the primary arithmetic. Laws of Form sometimes loosely refers to the "primary algebra" as well as to LoF. == Contents == The preface states that the work was first explored in 1959, and Spencer Brown cites Bertrand Russell as being supportive of his endeavour. He also thanks J. C. P. Miller of University College London for helping with the proofreading and offering other guidance. In 1963 Spencer Brown was invited by Harry Frost, staff lecturer in the physical sciences at the department of Extra-Mural Studies of the University of London, to deliver a course on the mathematics of logic. LoF emerged from work in electronic engineering its author did around 1960. Key ideas of the LOF were first outlined in his 1961 manuscript Design with the Nor, which remained unpublished until 2021, and further refined during subsequent lectures on mathematical logic he gave under the auspices of the University of London's extension program. LoF has appeared in several editions. The second series of editions appeared in 1972 with the "Preface to the First American Edition", which emphasised the use of self-referential paradoxes, and the most recent being a 1997 German translation. LoF has never gone out of print. LoF's mystical and declamatory prose and its love of paradox make it a challenging read for all. Spencer-Brown was influenced by Ludwig Wittgenstein and R. D. Laing. LoF also echoes a number of themes from the writings of Charles Sanders Peirce, Bertrand Russell, and Alfred North Whitehead. The work has had curious effects on some classes of its readership; for example, on obscure grounds, it has been claimed that the entire book is written in an operational way, giving instructions to the reader instead of telling them what "is", and that in accordance with G. Spencer-Brown's interest in paradoxes, the only sentence that makes a statement that something is, is the statement which says no such statements are used in this book. Furthermore, the claim asserts that except for this one sentence the book can be seen as an example of E-Prime. What prompted such a claim, is obscure, either in terms of incentive, logical merit, or as a matter of fact, because the book routinely and naturally uses the verb to be throughout, and in all its grammatical forms, as may be seen both in the original and in quotes shown below. == Reception == Ostensibly a work of formal mathematics and philosophy, LoF became something of a cult classic: it was praised by Heinz von Foerster when he reviewed it for the Whole Earth Catalog. Those who agree point to LoF as embodying an enigmatic "mathematics of consciousness", its algebraic symbolism capturing an (perhaps even "the") implicit root of cognition: the ability to "distinguish". LoF argues that primary algebra reveals striking connections among logic, Boolean algebra, and arithmetic, and the philosophy of language and mind. Stafford Beer wrote in a review for Nature in 1969, "When one thinks of all that Russell went through sixty years ago, to write the Principia, and all we his readers underwent in wrestling with those three vast volumes, it is almost sad". Banaschewski (1977) argues that the primary algebra is nothing but new notation for Boolean algebra. Indeed, the two-element Boolean algebra 2 can be seen as the intended interpretation of the primary algebra. Yet the notation of the primary algebra: Fully exploits the duality characterizing not just Boolean algebras but all lattices; Highlights how syntactically distinct statements in logic and 2 can have identical semantics; Dramatically simplifies Boolean algebra calculations, and proofs in sentential and syllogistic logic. Moreover, the syntax of the primary algebra can be extended to formal systems other than 2 and sentential logic, resulting in boundary mathematics. LoF has influenced, among others, Heinz von Foerster, Louis Kauffman, Niklas Luhmann, Humberto Maturana, Francisco Varela and William Bricken. Some of these authors have modified the primary algebra in a variety of interesting ways. LoF claimed that certain well-known mathematical conjectures of very long standing, such as the four color theorem, Fermat's Last Theorem, and the Goldbach conjecture, are provable using extensions of the primary algebra. Spencer-Brown eventually circulated a purported proof of the four color theorem, but it was met with skepticism. == The form (Chapter 1) == The symbol: Also called the "mark" or "cross", is the essential feature of the Laws of Form. In Spencer-Brown's inimitable and enigmatic fashion, the Mark symbolizes the root of cognition, i.e., the dualistic Mark indicates the capability of differentiating a "this" from "everything else but this". In LoF, a Cross denotes the drawing of a "distinction", and can be thought of as signifying the following, all at once: The act of drawing a boundary around something, thus separating it from everything else; That which becomes distinct from everything by drawing the boundary; Crossing from one side of the boundary to the other. All three ways imply an action on the part of the cognitive entity (e.g., person) making the distinction. As LoF puts it: "The first command: Draw a distinction can well be expressed in such ways as: Let there be a distinction, Find a distinction, See a distinction, Describe a distinction, Define a distinction, Or: Let a distinction be drawn". (LoF, Notes to chapter 2) The counterpoint to the Marked state is the Unmarked state, which is simply nothing, the void, or the un-expressable infinite represented by a blank space. It is simply the absence of a Cross. No distinction has been made and nothing has been crossed. The Marked state and the void are the two primitive values of the Laws of Form. The Cross can be seen as denoting the distinction between two states, one "considered as a symbol" and another not so considered. From this fact arises a curious resonance with some theories of consciousness and language. Paradoxically, the Form is at once Observer and Observed, and is also the creative act of making an observation. LoF (excluding back matter) closes with the words: ...the first distinction, the Mark and the observer are not only interchangeable, but, in the form, identical. C. S. Peirce came to a related insight in the 1890s; see § Related work. == The primary arithmetic (Chapter 4) == The syntax of the primary arithmetic goes as follows. There are just two atomic expressions: The empty Cross ; All or part of the blank page (the "void"). There are two inductive rules: A Cross may be written over any expression; Any two expressions may be concatenated. The semantics of the primary arithmetic are perhaps nothing more than the sole explicit definition in LoF: "Distinction is perfect continence". Let the "unmarked state" be a synonym for the void. Let an empty Cross denote the "marked state". To cross is to move from one value, the unmarked or marked state, to the other. We can now state the "arithmetical" axioms A1 and A2, which ground the primary arithmetic (and hence all of the Laws of Form): "A1. The law of Calling". Calling twice from a state is indistinguishable from calling once. To make a distinction twice has the same effect as making it once. For example, saying "Let there be light" and then saying "Let there be light" again, is the same as saying it once. Formally: = {\displaystyle \ =} "A2. The law of Crossing". After crossing from the unmarked to the marked state, crossing again ("recrossing") starting from the marked state returns one to the unmarked state. Hence recrossing annuls crossing. Formally: = {\displaystyle \ =} In both A1 and A2, the expression to the right of '=' has fewer symbols than the expression to the left of '='. This suggests that every primary arithmetic expression can, by repeated application of A1 and A2, be simplified to one of two states: the marked or the unmarked state. This is indeed the case, and the result is the expression's "simplification". The two fundamental metatheorems of the primary arithmetic state that: Every finite expression has a unique simplification. (T3 in LoF); Starting from an initial marked or unmarked state, "complicating" an expression by a finite number of repeated application of A1 and A2 cannot yield

    Read more →
  • Workplace robotics safety

    Workplace robotics safety

    Workplace robotics safety is an aspect of occupational safety and health when robots are used in the workplace. This includes traditional industrial robots as well as emerging technologies such as drone aircraft and wearable robotic exoskeletons. Types of accidents include collisions, crushing, and injuries from mechanical parts. Hazard controls include physical barriers, good work practices, and proper maintenance. == Background == Many workplace robots are industrial robots used in manufacturing. According to the International Federation of Robotics, 1.7 million new robots are expected to be used in factories between 2017 and 2020. Emerging robot technologies include collaborative robots, personal care robots, construction robots, exoskeletons, autonomous vehicles, and drone aircraft (also known as unmanned aerial vehicles or UAVs). Advances in automation technologies (e.g. fixed robots, collaborative and mobile robots, and exoskeletons) have the potential to improve work conditions but also to introduce workplace hazards in manufacturing workplaces. Fifty-six percent of robot injuries are classified as pinch injuries and 44% of injuries are classified as impact injuries. A 1987 study found that line workers are at the greatest risk, followed by maintenance workers, and programmers. Poor workplace design and human error caused most injuries. Despite the lack of occupational surveillance data on injuries associated specifically with robots, researchers from the US National Institute for Occupational Safety and Health (NIOSH) identified 61 robot-related deaths between 1992 and 2015 using keyword searches of the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries research database (see info from Center for Occupational Robotics Research). Using data from the Bureau of Labor Statistics, NIOSH and its state partners have investigated 4 robot-related fatalities under the Fatality Assessment and Control Evaluation Program. In addition the Occupational Safety and Health Administration (OSHA) has investigated robot-related deaths and injuries, which can be reviewed at OSHA Accident Search page. Injuries and fatalities could increase over time because of the increasing number of collaborative and co-existing robots, powered exoskeletons, and autonomous vehicles into the work environment. Safety standards are being developed by the Robotic Industries Association (RIA) in conjunction with the American National Standards Institute (ANSI). On October 5, 2017, OSHA, NIOSH and RIA signed an alliance to work together to enhance technical expertise, identify and help address potential workplace hazards associated with traditional industrial robots and the emerging technology of human-robot collaboration installations and systems, and help identify needed research to reduce workplace hazards. On October 16 NIOSH launched the Center for Occupational Robotics Research to "provide scientific leadership to guide the development and use of occupational robots that enhance worker safety, health, and well being". So far, the research needs identified by NIOSH and its partners include: tracking and preventing injuries and fatalities, intervention and dissemination strategies to promote safe machine control and maintenance procedures, and on translating effective evidence-based interventions into workplace practice. == Hazards == Many hazards and injuries can result from the use of robots in the workplace. Some robots, notably those in a traditional industrial environment, are fast and powerful. This increases the potential for injury as one swing from a robotic arm, for example, could cause serious bodily harm. There are additional risks when a robot malfunctions or is in need of maintenance. A worker who is working on the robot may be injured because a malfunctioning robot is typically unpredictable. For example, a robotic arm that is part of a car assembly line may experience a jammed motor. A worker who is working to fix the jam may suddenly get hit by the arm the moment it becomes unjammed. Additionally, if a worker is standing in a zone that is overlapping with nearby robotic arms, he or she may get injured by other moving equipment. There are four types of accidents that can occur with robots: impact or collision accidents, crushing and trapping accidents, mechanical part accidents, and other accidents. Impact or collision accidents occur generally from malfunctions and unpredicted changes. Crushing and trapping accidents occur when a part of a worker's body becomes trapped or caught on robotic equipment. Mechanical part accidents can occur when a robot malfunctions and starts to "break down", where the ejection of parts or exposed wire can cause serious injury. Other accidents at just general accidents that occur from working with robots. There are seven sources of hazards that are associated with human interaction with robots and machines: human errors, control errors, unauthorized access, mechanical failures, environmental sources, power systems, and improper installation. Human errors could be anything from one line of incorrect code to a loose bolt on a robotic arm. Many hazards can stem from human-based error. Control errors are intrinsic and are usually not controllable nor predictable. Unauthorized access hazards occur when a person who is not familiar with the area enters the domain of a robot. Mechanical failures can happen at any time, and a faulty unit is usually unpredictable. Environmental sources are things such as electromagnetic or radio interference in the environment that can cause a robot to malfunction. Power systems are pneumatic, hydraulic, or electrical power sources; these power sources can malfunction and cause fires, leaks, or electrical shocks. Improper installation is fairly self-explanatory; a loose bolt or an exposed wire can lead to inherent hazards. === Emerging technologies === Emerging robotic technologies can reduce hazards to workers, but can also introduce new hazards. For example, robotic exoskeletons can be used in construction to reduce load to the spine, improve posture, and reduce fatigue; however, they can also increase chest pressure, limit mobility when moving out of the way of a falling object, and cause balance problems. Unmanned aerial vehicles are being used in the construction industry to do monitoring and inspections of buildings under construction. This reduces the need for humans to be in hazardous locations, but the risk of a UAV collision presents a hazard to workers. For collaborative robots, isolation is not possible. Possible hazard controls include collision avoidance systems, and making the robot less stiff to lessen the impact force. Robotic tech vest is a wearable device for humans, worn in Amazon warehouses. == Hazard controls == There are a few ways to prevent injuries by implementing hazard controls. There can be risk assessments at each of the various stages of a robot's development. Risk assessments can help gather information about a robot's status, how well it is being maintained, and if repairs are needed soon. By being aware of the status of a robot, injuries can be prevented and hazards reduced. Safeguarding devices can be implemented to reduce the risk of injuries. These can include engineering controls such as physical barriers, guard rails, presence-sensing safeguarding devices, etc. Awareness devices are usually used in conjunction with safeguarding devices. They are usually a system of rope or chain barriers with lights, signs, whistles, and horns. Their purpose it to be able to alert workers or personnel of certain dangers. Operator safeguards can also be in place. These usually utilize safeguarding devices to protect the operator and reduce risk of injury. Additionally, when an operator is within close proximity of a robot, the working speed of the robot can be reduced to ensure that the operator is in full control. This can be done by placing the robot in the manual or teach mode. It is also crucial to inform the programmer of the robot of what type of work the robot will be doing, how it will interact with other robots, and how it will work in relation to an operator. Proper maintenance of robotic equipment is also critical in order to reduce hazards. Maintaining a robot insures that it continues to function properly, thereby reducing the risks associated with a malfunction. One common safeguard used in industrial settings is the installation of robot safety fencing. These barriers, often made from durable materials such as mesh or polycarbonate, prevent accidental interactions between workers and robotic systems, reducing the risk of injury. Robot safety fencing is particularly important in environments where high-speed or powerful robots are used. == Regulations == Some existing regulations regarding robots and robotic systems include: ANSI/RIA R15.06 OSHA 29 CFR 1910.333 OSHA 29 CFR 1910.147 ISO 10218 ISO/TS 15066 ISO/DIS 13482

    Read more →
  • Lillian Lee (computer scientist)

    Lillian Lee (computer scientist)

    Lillian Lee is a computer scientist whose research involves natural language processing, sentiment analysis, and computational social science. She is a professor of computer science and information science at Cornell University, and co-editor-in-chief of the journal Transactions of the Association for Computational Linguistics. == Education == Lee graduated from Cornell University in 1993 with an undergraduate degree in math and science. She completed her Ph.D. at Harvard University in 1997. Her dissertation, Similarity-Based Approaches to Natural Language Processing, was supervised by Stuart M. Shieber. == Career == Lee has been a member of the Cornell faculty since 1997. == Recognition == Lee has been a fellow of the Association for the Advancement of Artificial Intelligence since 2013, and of the Association for Computational Linguistics since 2017. Lee was elected as an ACM Fellow in 2018 for "contributions to natural language processing, sentiment analysis, and computational social science".

    Read more →
  • AI Code-review Tools: Free vs Paid (2026)

    AI Code-review Tools: Free vs Paid (2026)

    Comparing the best AI code-review tool? An AI code-review tool is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI code-review tool slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.

    Read more →
  • AI Video Editors: Free vs Paid (2026)

    AI Video Editors: Free vs Paid (2026)

    Trying to pick the best AI video editor? An AI video editor is software that uses machine learning to help you get more done — it scales effortlessly from a single task to thousands. The best picks balance beginner-friendly simplicity with the depth power users need, and they ship updates often. Whether you are a beginner or a pro, the right AI video editor slots into your workflow and pays for itself fast. This guide breaks down the top picks, their pros and cons, and who each one is best for.

    Read more →
  • Meta-Labeling

    Meta-Labeling

    Meta-labeling, also known as corrective AI, is a machine learning (ML) technique utilized in quantitative finance to enhance the performance of investment and trading strategies, developed in 2017 by Marcos López de Prado at Guggenheim Partners and Cornell University. The core idea is to separate the decision of trade direction (side) from the decision of trade sizing, addressing the inefficiencies of simultaneously learning both side and size predictions. The side decision involves forecasting market movements (long, short, neutral), while the size decision focuses on risk management and profitability. It serves as a secondary decision-making layer that evaluates the signals generated by a primary predictive model. By assessing the confidence and likely profitability of those signals, meta-labeling allows investors and algorithms to dynamically size positions and suppress false positives. == Motivation == Meta-labeling is designed to improve precision without sacrificing recall. As noted by López de Prado, attempting to model both the direction and the magnitude of a trade using a single algorithm can result in poor generalization. By separating these tasks, meta-labeling enables greater flexibility and robustness: Enhances control over capital allocation. Reduces overfitting by limiting model complexity. Allows the use of interpretability tools and tailored thresholds to manage risk. Enables dynamic trade suppression in unfavorable regimes. == Applications == Meta-labeling has been applied in a variety of financial ML contexts, including: Algorithmic trading: Filtering and sizing trades to reduce false positives. Portfolio optimization: Scaling exposure across multiple signals with differing confidence levels. Risk management: Dynamically disabling strategies in adverse market conditions. Model validation: Interpreting when and why a model may be underperforming due to regime shifts. == General architecture == Meta-labeling decouples two core components of systematic trading strategies: directional prediction and position sizing. The process involves training a primary model to generate trade signals (e.g., buy, sell, or hold) and then training a secondary model to determine whether each signal is likely to lead to a profitable trade. The second model outputs a probability that is interpreted as the confidence in the forecast, which can be used to adjust the position size or to filter out unreliable trades. Meta-labeling is typically implemented as a three-stage process: Primary model (M1): Predicts the direction or label of a financial outcome using features such as market prices, returns, or volatility indicators. A typical output is directional, e.g., Y ∈ {−1,0,1}, representing short, neutral, or long positions. Secondary model (M2): A binary classifier trained to predict whether the primary model's prediction will be profitable. The target variable is a binary meta-label F ∈ { 0 , 1 } {\displaystyle F\in \{0,1\}} . Inputs can include features used in the primary model, performance diagnostics, or market regime data. Position sizing algorithm (M3): Translates the output probability of the secondary model into a position size. Higher confidence scores result in larger allocations, while lower confidence leads to reduced or zero exposure. === Stage 1: Forecasting side === Primary model architecture Figure 1 Figure 1 presents the architecture of a primary model. It focuses on forecasting the side of the trade. Following the example, this model (M1) takes in input data – such as open-high-low-close data and determines the side of the position to take: a negative number is a short position, and positive number is a long position, the range is set between −1 and 1 (the closer it is to −1 or 1, the stronger the models conviction is). When training the model, the labels are −1 and 1, based on the direction of forward returns for some predefined investment horizon. The researcher may decide to apply a recall check (τ: "Tau") by setting a minimum threshold that the initial output needs to be to qualify of a short or long position (if the threshold is not met, no side forecast is predicted, leading to closing of any open positions), this leads to the primary model output which is one of three possible side forecasts: −1, 0, or 1. The primary model also generates evaluation data which can be used by the secondary model, to improve performance of size forecasts. Some examples of evaluation data include rolling accuracy, F1, recall, precision, and AUC scores. === Stage 2: Filtering out false positives === General meta-labeling architecture Figure 2 Next comes the phase of filtering out false positives, by applying a secondary machine learning model (M2), which is a binary classifier trained to determine if the trade will be profitable or not. The model takes as input four general groupings of data: General input data which is predictive of a false positive. For example the last 30 days rolling volatility of the underlying asset. Evaluation data. Market state and regime data, one may find that macro economic data or clustering the market into regimes may help as specific trading strategies are known to perform better in particular regimes. Example: momentum based strategies perform best in periods with low volatility and strong directional moves. Primary models initial input which is a value between −1 and 1. This highlights the strength of the primary models conviction. The output of the model is a value between −1 and 1 (if using a Tanh function) which will indicate the strength of the conviction that a short or long position is profitable, or it could simply be between 0 and 1 (using a sigmoid function) if one only wanted to know if it made money or not. This output allows filtering out trades that are likely to lead to losses. One could stop at this point or use the outputs of the secondary model as inputs to a position sizing algorithm (M3) which could further enhance strategy performance metrics by translating the output probability of the secondary model into a position size. Higher confidence scores result in larger allocations, while lower confidence leads to reduced or zero exposure. === Stage 3: Optimizing position sizes === ==== Position sizing methods (M3) ==== Various algorithms have been proposed for transforming predicted probabilities into trade sizes: All-or-nothing: Allocate 100% of capital if the probability exceeds a predefined threshold (e.g., 0.5); otherwise, do not trade. Model confidence: Use the probability score directly as the fraction of capital allocated. Linear scaling: Rescale the model's probabilities using min-max normalization based on the training data. Normal CDF (NCDF): Use a normal cumulative distribution function applied to a z-statistic derived from the predicted probability. Empirical CDF (ECDF): Rank probabilities based on their percentile in the training data to ensure relative allocation. Sigmoid Optimal Position Sizing (SOPS): Applies a smooth non-linear sigmoid transformation optimized to maximize risk-adjusted returns (Sharpe ratio). ==== Model calibration ==== Each machine learning algorithm used in meta-labeling tends to produce outputs with different characteristic distributions; for example, some are approximately normally distributed, whereas others exhibit a pronounced U-shape, concentrating probabilities near the extremes. Due to these varying distributions, simply summing the outputs of different models can inadvertently lead to uneven weighting of signals, biasing trade decisions. To address this, model calibration techniques are essential to adjust the predicted probabilities towards frequentist probabilities, ensuring that model outputs reflect true likelihoods more accurately. Two common calibration techniques are: Platt scaling (Sigmoid scaling): Suitable for correcting S-shaped calibration plots typically produced by models such as support vector machines (SVMs). Isotonic regression: Fits a non-decreasing step function to probabilities and is effective particularly with larger datasets, though it can sometimes lead to overfitting. Transforming predictions to frequentist probabilities is crucial as it provides probabilistic outputs that are directly interpretable as the actual likelihood of an event occurring. Such calibration significantly enhances the effectiveness of fixed position sizing methods, reducing maximum drawdowns and increasing risk-adjusted returns. However, calibration has less impact on position sizing methods that directly estimate parameters from the training data, such as ECDF and SOPS, suggesting that calibration is a critical step mainly for fixed methods that rely heavily on raw model outputs. =

    Read more →
  • AI Presentation Makers Reviews: What Actually Works in 2026

    AI Presentation Makers Reviews: What Actually Works in 2026

    Looking for the best AI presentation maker? An AI presentation maker is software that uses machine learning to help you get more done — it can save you hours every week by automating repetitive work. Most options offer a generous free tier, with paid plans unlocking higher limits, faster processing, and team features. Whether you are a beginner or a pro, the right AI presentation maker slots into your workflow and pays for itself fast. Read on for hands-on impressions, pricing tiers, and the standout features that matter.

    Read more →
  • Robert Wilensky

    Robert Wilensky

    Robert Wilensky (26 March 1951 – 15 March 2013) was an American computer scientist and professor at the UC Berkeley School of Information, with his main focus of research in artificial intelligence. == Academic career == In 1971, Wilensky received his bachelor's degree in mathematics from Yale University, and in 1978, a Ph.D. in computer science from the same institution. After finishing his thesis, "Understanding Goal-Based Stories", Wilensky joined the faculty from the EECS Department of UC Berkeley. In 1986, he worked as the doctoral advisor of Peter Norvig, who then later published the standard textbook of the field: Artificial Intelligence: A Modern Approach. From 1993 to 1997, Wilensky was the Berkeley Computer Science Division Chair. During this time, he also served as director of the Berkeley Cognitive Science Program, director of the Berkeley Artificial Intelligence Research Project, and board member of the International Computer Science Institute. In 1997, he became a fellow of the Association for Computing Machinery "for research contributions to the areas of natural language processing and digital libraries as well as outstanding leadership in Computer Science." Furthermore, he also was a Fellow of the Association for the Advancement of Artificial Intelligence. He retired from faculty in 2007 and died on Friday, March 15, 2013, of a bacterial infection at the Alta Bates Summit Medical Center. Wilensky was married to Ann Danforth and he is survived by her and their two children, Avi and Eli Wilensky == Research == Throughout his career, Wilensky authored and co-authored over 60 scholarly articles and technical reports on AI, natural language processing, and information dissemination. In addition to his numerous technical publications, Wilensky also published two books on the programming language LISP, LISPcraft and Common LISPcraft, and had almost completed another book manuscript when he suffered a cardiac arrest and stopped writing. Among his publications are: R. Wilensky, (1986-09-17). Common LISPcraft. W. W. Norton & Company. ISBN 9780393955446. T. A. Phelps and R. Wilensky, "Toward active, extensible, networked documents: Multivalent architecture and applications," in Proc. 1st ACM Intl. Conf. on Digital Libraries, E. A. Fox and G. Marchionini, Eds., New York, NY: ACM Press, 1996, pp. 100–108. J. Traupman and R. Wilensky, "Experiments in Improving Unsupervised Word Sense Disambiguation," University of California, Berkeley, Department of EECS, Computer Science Division, Tech. Rep. 03–1227, Feb. 2003. R. Wilensky, Planning and Understanding: A Computational Approach to Human Reasoning, Advanced Book Program, Reading, MA: Addison-Wesley Publishing Co., 1983. R. Wilensky, "Understanding Goal-Based Stories," Yale University, Sep. 1978. B. Kahn and R. Wilensky, "A Framework for Distributed Digital Object Services", May 1995.

    Read more →