AI Essay Reviewer

AI Essay Reviewer — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  International Road Traffic and Accident Database

  The International Road Traffic and Accident Database (IRTAD) is an initiative dedicated to compiling and analyzing global road crash data. It is managed by the International Transport Forum (ITF) under the auspices of its permanent working group, which specializes in road safety, commonly referred to as the IRTAD Group. The primary objective of IRTAD is to provide a robust empirical basis for international comparisons in the field of road safety and to offer data to support the formulation of effective road safety policies. == Data availability == A portion of the data gathered by IRTAD is accessible for free through the OECD statistics website, however the remaining data requires a subscription for access. == History == The IRTAD database was originally started in 1988 by Germany's Federal Institution for Roads (BASt) in response to demands for international comparative data. It was later taken over and expanded by the International Transport Forum and has grown to be an important resource for comparing road safety metrics between countries worldwide, although mostly in the developed world. Every year, the ITF publishes comparative and country-by-country road safety data gathered for the IRTAD database and analysed by the IRTAD Group in the ITF Road Safety Annual Report, informally known as "IRTAD Report". Over the years, the IRTAD acronym has come to stand not only for the database, but also for the Traffic Safety Data and Analysis Group (usually referred to as IRTAD Group). The IRTAD Group is the International Transport Forum's permanent working group on road safety. It consists of a group of international road safety experts drawn from national road administrations, road safety research institutes, International organizations, automobile associations, insurance companies, car manufacturers and other road safety stakeholders. The IRTAD Group is a major forum for international road safety collaboration and exchange of best practices. Its focus is on improving road safety data as a basis for targeting interventions that are effective in reducing the number of road deaths and serious traffic injuries. The work of IRTAD, among that of others, has spawned the creation of road safety observatories for different world regions: the Ibero-American Road Safety Observatory Archived 2020-06-28 at the Wayback Machine (OISEVI), the African Road Safety Observatory Archived 2020-06-10 at the Wayback Machine, and the South-East Asian Road Safety Observatory. The ITF supports OISEVI through the Spanish-language IRTAD-LAC database and is actively involved in the implementation of the African and South East-Asian observatories. The genesis of the road safety observatory movement dates back to 2008, when the ITF, via IRTAD, began to facilitate twinning between countries striving to improve their road safety record and countries with high road safety performance. The initial twinning was between Jamaica and the United Kingdom. This work was supported by the World Bank, the Inter-American Development Bank (IADB) and the FIA Foundation. The twinning between Argentina and Spain in 2011 led to the creation of OISEVI. To this day, the ITF supports OISEVI through the Spanish-language IRTAD-LAC database. In 2006, the ITF set up Safer City Streets, a global traffic safety network for cities that replicates the successful IRTAD approach for urban road safety.

  Read more →
• 

  List of algorithms

  An algorithm is a fundamental set of rules or defined procedures that are typically designed and used to be a simpler way to solve a specific problem or a broad set of problems. Simply speaking, algorithms define different processes, sets of rules and regulations, or methodologies that are to be followed through in calculations, data processing, data mining, pattern recognition, automated reasoning or other problem-solving operations. With the increasing automation of services, more and more decisions are being made by algorithms. Some general examples are risk assessments, anticipatory policing, and pattern recognition technology. The following is a list of well-known algorithms. == Automated planning == == Combinatorial algorithms == === General combinatorial algorithms === Brent's algorithm: finds a cycle in function value iterations using only two iterators Floyd's cycle-finding algorithm: finds a cycle in function value iterations Gale–Shapley algorithm: solves the stable matching problem Pseudorandom number generators (uniformly distributed—see also List of pseudorandom number generators for other PRNGs with varying degrees of convergence and varying statistical quality): ACORN generator Blum Blum Shub Lagged Fibonacci generator Linear congruential generator Mersenne Twister === Graph algorithms === Blossom algorithm: algorithm for constructing maximum-cardinality matching on graphs. Coloring algorithm: algorithms for graph (vertex or edge) coloring (subject to constraints, e.g. proper coloring or list coloring) Hopcroft–Karp algorithm: convert a bipartite graph to a maximum-cardinality matching Hungarian algorithm: algorithm for finding a perfect matching Prüfer coding: conversion between a labeled tree and its Prüfer sequence Tarjan's off-line lowest common ancestors algorithm: computes lowest common ancestors for pairs of nodes in a tree Topological sort: finds linear order of nodes (e.g. jobs) based on their dependencies. ==== Graph drawing ==== Coin graph drawing algorithms for finite connected planar graphs (approximately computing the theoretical circle-packing given by the Koebe-Andreev-Thurston theorem). See also Fáry's theorem on straight-line drawings of planar graphs. Force-based algorithms (also known as force-directed algorithms or spring-based algorithms) Spectral layout ==== Network theory ==== Network analysis Link analysis Girvan–Newman algorithm: detect communities in complex systems Web link analysis Hyperlink-Induced Topic Search (HITS) (also known as Hubs and authorities) PageRank TrustRank Flow networks Dinic's algorithm: is a strongly polynomial algorithm for computing the maximum flow in a flow network. Edmonds–Karp algorithm: implementation of Ford–Fulkerson Ford–Fulkerson algorithm: computes the maximum flow in a graph Karger's algorithm: a Monte Carlo method to compute the minimum cut of a connected graph Push–relabel algorithm: computes a maximum flow in a graph ==== Routing for graphs ==== Edmonds' algorithm (also known as Chu–Liu/Edmonds' algorithm): find maximum or minimum branchings Euclidean minimum spanning tree: algorithms for computing the minimum spanning tree of a set of points in the plane Longest path problem: find a simple path of maximum length in a given graph Minimum spanning tree Borůvka's algorithm Kruskal's algorithm Prim's algorithm Reverse-delete algorithm Nonblocking minimal spanning switch say, for a telephone exchange Shortest path problem Bellman–Ford algorithm: computes shortest paths in a weighted graph (where some of the edge weights may be negative) Dijkstra's algorithm: computes shortest paths in a graph with non-negative edge weights Floyd–Warshall algorithm: solves the all pairs shortest path problem in a weighted, directed graph Johnson's algorithm: all pairs shortest path algorithm in sparse weighted directed graph Transitive closure problem: find the transitive closure of a given binary relation Traveling salesman problem Christofides algorithm Nearest neighbour algorithm Vehicle routing problem Clarke and Wright Saving algorithm Warnsdorff's rule: a heuristic method for solving the Knight's tour problem ==== Graph search ==== A: special case of best-first search that uses heuristics to improve speed B: a best-first graph search algorithm that finds the least-cost path from a given initial node to any goal node (out of one or more possible goals) Backtracking: abandons partial solutions when they are found not to satisfy a complete solution Beam search: is a heuristic search algorithm that is an optimization of best-first search that reduces its memory requirement Beam stack search: integrates backtracking with beam search Best-first search: traverses a graph in the order of likely importance using a priority queue Bidirectional search: find the shortest path from an initial vertex to a goal vertex in a directed graph Breadth-first search: traverses a graph level by level Brute-force search: an exhaustive and reliable search method, but computationally inefficient in many applications D: an incremental heuristic search algorithm Depth-first search: traverses a graph branch by branch Dijkstra's algorithm: a special case of A for which no heuristic function is used General Problem Solver: a seminal theorem-proving algorithm intended to work as a universal problem solver machine. Iterative deepening depth-first search (IDDFS): a state space search strategy Jump point search: an optimization to A which may reduce computation time by an order of magnitude using further heuristics Lexicographic breadth-first search (also known as Lex-BFS): a linear time algorithm for ordering the vertices of a graph SSS: state space search traversing a game tree in a best-first fashion similar to that of the A search algorithm Uniform-cost search: a tree search that finds the lowest-cost route where costs vary ==== Subgraphs ==== Cliques Bron–Kerbosch algorithm: a technique for finding maximal cliques in an undirected graph MaxCliqueDyn maximum clique algorithm: find a maximum clique in an undirected graph Strongly connected components Kosaraju's algorithm Path-based strong component algorithm Tarjan's strongly connected components algorithm Subgraph isomorphism problem === Sequence algorithms === ==== Approximate sequence matching ==== Bitap algorithm: fuzzy algorithm that determines if strings are approximately equal. Phonetic algorithms Daitch–Mokotoff Soundex: a Soundex refinement which allows matching of Slavic and Germanic surnames Double Metaphone: an improvement on Metaphone Match rating approach: a phonetic algorithm developed by Western Airlines Metaphone: an algorithm for indexing words by their sound, when pronounced in English NYSIIS: phonetic algorithm, improves on Soundex Soundex: a phonetic algorithm for indexing names by sound, as pronounced in English String metrics: computes a similarity or dissimilarity (distance) score between two pairs of text strings Damerau–Levenshtein distance: computes a distance measure between two strings, improves on Levenshtein distance Dice's coefficient (also known as the Dice coefficient): a similarity measure related to the Jaccard index Hamming distance: sum number of positions which are different Jaro–Winkler distance: is a measure of similarity between two strings Levenshtein edit distance: computes a metric for the amount of difference between two sequences Trigram search: search for text when the exact syntax or spelling of the target object is not precisely known ==== Selection algorithms ==== Introselect Quickselect ==== Sequence search ==== Linear search: locates an item in an unsorted sequence Selection algorithm: finds the kth largest item in a sequence Sorted lists Binary search algorithm: locates an item in a sorted sequence Eytzinger binary search: cache friendly binary search algorithm Fibonacci search technique: search a sorted sequence using a divide and conquer algorithm that narrows down possible locations with the aid of Fibonacci numbers Jump search (or block search): linear search on a smaller subset of the sequence Predictive search: binary-like search which factors in magnitude of search term versus the high and low values in the search. Sometimes called dictionary search or interpolated search. Uniform binary search: an optimization of the classic binary search algorithm Ternary search: a technique for finding the minimum or maximum of a function that is either strictly increasing and then strictly decreasing or vice versa ==== Sequence merging ==== k-way merge algorithm Simple merge algorithm Union (merge, with elements on the output not repeated) ==== Sequence permutations ==== Fisher–Yates shuffle (also known as the Knuth shuffle): randomly shuffle a finite set Heap's permutation generation algorithm: interchange elements to generate next permutation Schensted algorithm: constructs a pair of Young tableaux from a permutation Steinhaus–Johnson–Trotter algorithm (also known as the Johnson–Trotter algorithm):

  Read more →
• 

  BuildingSMART Data Dictionary

  buildingSMART Data Dictionary (bSDD) is a service provided by buildingSMART which offers free data dictionaries for the international standardization of construction planning. The structure of bSDD was defined by the Nonprofit organization Buildingsmart and is used to describe objects and their attributes in a BIM process. == Aim == The aim of bSDD is to enable architects and planners to exchange and share building data across different specialists and language boundaries and thus avoid misunderstandings caused by different interpretations of terms. The bSDD standard extends the more general IFC. Software developers can access and use the dictionaries. In May 2025 over 300 dictionaries are available, including IFC, extensions to it such as Airport Domain IFC extension module or classification systems like Uniclass. == Structure == The main structural parts of bSDD are: Dictionary: A dictionary is a collection of classes: Class: A class describes the various object types, such as Bag drop or Baggage conveyor in airport planning. A class contains properties: Property: A property describes a part of a class, e.g. color or weight. Related properties are organized in a group: GroupOfProperties: A group organizes related properties, e.g. environmental properties or electrical properties. == Creating and managing a directory == Every dictionary in bSDD must be published in the name of a registered organization. As soon as the content is activated, it receives an unchangeable URI. This means that the content remains permanently in bSDD and cannot be deleted - this ensures stable use of the dictionary. It is only possible to change the status to inactive if it is no longer to be used - however, the dictionary remains permanently.

  Read more →
• 

  BioCreative

  BioCreAtIvE (A critical assessment of text mining methods in molecular biology) consists in a community-wide effort for evaluating information extraction and text mining developments in the biological domain. It was preceded by the Knowledge Discovery and Data Mining (KDD) Challenge Cup for detection of gene mentions. == Community Challenges == === First edition (2004-2005) === Three main tasks were posed at the first BioCreAtIvE challenge: the entity extraction task, the gene name normalization task, and the functional annotation of gene products task. The data sets produced by this contest serve as a Gold Standard training and test set to evaluate and train Bio-NER tools and annotation extraction tools. === Second edition (2006-2007) === The second BioCreAtIvE challenge (2006-2007) had also 3 tasks: detection of gene mentions, extraction of unique idenfiers for genes and extraction information related to physical protein-protein interactions. It counted with participation of 44 teams from 13 countries. === Third edition (2011-2012) === The third edition of BioCreative included for the first time the InterActive Task (IAT), designed to evaluate the practical usability of text mining tools in real-world biocuration tasks. === Fifth edition (2016) === BioCreative V had 5 different tracks, including an interactive task (IAT) for usability of text mining systems and a track using the BioC format for curating information for BioGRID.

  Read more →
• 

  Convolution

  In mathematics (in particular, functional analysis), convolution is a mathematical operation on two functions f {\displaystyle f} and g {\displaystyle g} that produces a third function f ∗ g {\displaystyle fg} , as the integral of the product of the two functions after one is reflected about the y-axis and shifted. The term convolution refers to both the resulting function and to the process of computing it. The integral is evaluated for all values of shift, producing the convolution function. The choice of which function is reflected and shifted before the integral does not change the integral result (see commutativity). Graphically, it expresses how the 'shape' of one function is modified by the other. Some features of convolution are similar to cross-correlation: for real-valued functions, of a continuous or discrete variable, convolution f ∗ g {\displaystyle fg} differs from cross-correlation f ⋆ g {\displaystyle f\star g} only in that either f ( x ) {\displaystyle f(x)} or g ( x ) {\displaystyle g(x)} is reflected about the y-axis in convolution; thus it is a cross-correlation of g ( − x ) {\displaystyle g(-x)} and f ( x ) {\displaystyle f(x)} , or f ( − x ) {\displaystyle f(-x)} and g ( x ) {\displaystyle g(x)} . For complex-valued functions, the cross-correlation operator is the adjoint of the convolution operator. Convolution has applications that include probability, statistics, acoustics, spectroscopy, signal processing and image processing, computer vision and human vision, geophysics, engineering, physics, and differential equations. The convolution can be defined for functions on Euclidean space and other groups (as algebraic structures). For example, periodic functions, such as the discrete-time Fourier transform, can be defined on a circle and convolved by periodic convolution. (See row 18 at DTFT § Properties.) A discrete convolution can be defined for functions on the set of integers. Generalizations of convolution have applications in the field of numerical analysis and numerical linear algebra, and in the design and implementation of finite impulse response filters in signal processing. Computing the inverse of the convolution operation is known as deconvolution. == Definition == The convolution of f {\displaystyle f} and g {\displaystyle g} is written f ∗ g {\displaystyle fg} , denoting the operator with the symbol ∗ {\displaystyle } . It is defined as the integral of the product of the two functions after one is reflected about the y-axis and shifted. As such, it is a particular kind of integral transform: ( f ∗ g ) ( t ) := ∫ − ∞ ∞ f ( τ ) g ( t − τ ) d τ . {\displaystyle (fg)(t):=\int _{-\infty }^{\infty }f(\tau )g(t-\tau )\,d\tau .} An equivalent definition is (see commutativity): ( f ∗ g ) ( t ) := ∫ − ∞ ∞ f ( t − τ ) g ( τ ) d τ . {\displaystyle (fg)(t):=\int _{-\infty }^{\infty }f(t-\tau )g(\tau )\,d\tau .} While the symbol t {\displaystyle t} is used above, it need not represent the time domain. At each t {\displaystyle t} , the convolution formula can be described as the area under the function f ( τ ) {\displaystyle f(\tau )} weighted by the function g ( − τ ) {\displaystyle g(-\tau )} shifted by the amount t {\displaystyle t} . As t {\displaystyle t} changes, the weighting function g ( t − τ ) {\displaystyle g(t-\tau )} emphasizes different parts of the input function f ( τ ) {\displaystyle f(\tau )} ; If t {\displaystyle t} is a positive value, then g ( t − τ ) {\displaystyle g(t-\tau )} is equal to g ( − τ ) {\displaystyle g(-\tau )} that slides or is shifted along the τ {\displaystyle \tau } -axis toward the right (toward + ∞ {\displaystyle +\infty } ) by the amount of t {\displaystyle t} , while if t {\displaystyle t} is a negative value, then g ( t − τ ) {\displaystyle g(t-\tau )} is equal to g ( − τ ) {\displaystyle g(-\tau )} that slides or is shifted toward the left (toward − ∞ {\displaystyle -\infty } ) by the amount of | t | {\displaystyle |t|} . For functions f {\displaystyle f} , g {\displaystyle g} supported on only [ 0 , ∞ ) {\displaystyle [0,\infty )} (i.e., zero for negative arguments), the integration limits can be truncated, resulting in: ( f ∗ g ) ( t ) = ∫ 0 t f ( τ ) g ( t − τ ) d τ for f , g : [ 0 , ∞ ) → R . {\displaystyle (fg)(t)=\int _{0}^{t}f(\tau )g(t-\tau )\,d\tau \quad \ {\text{for }}f,g:[0,\infty )\to \mathbb {R} .} For the multi-dimensional formulation of convolution, see domain of definition (below). === Notation === A common engineering notational convention is: f ( t ) ∗ g ( t ) := ∫ − ∞ ∞ f ( τ ) g ( t − τ ) d τ ⏟ ( f ∗ g ) ( t ) , {\displaystyle f(t)g(t)\mathrel {:=} \underbrace {\int _{-\infty }^{\infty }f(\tau )g(t-\tau )\,d\tau } _{(fg)(t)},} which has to be interpreted carefully to avoid confusion. For instance, f ( t ) ∗ g ( t − t 0 ) {\displaystyle f(t)g(t-t_{0})} is equivalent to ( f ∗ g ) ( t − t 0 ) {\displaystyle (fg)(t-t_{0})} , but f ( t − t 0 ) ∗ g ( t − t 0 ) {\displaystyle f(t-t_{0})g(t-t_{0})} is in fact equivalent to ( f ∗ g ) ( t − 2 t 0 ) {\displaystyle (fg)(t-2t_{0})} . === Relations with other transforms === Given two functions f ( t ) {\displaystyle f(t)} and g ( t ) {\displaystyle g(t)} with bilateral Laplace transforms (two-sided Laplace transform) F ( s ) = ∫ − ∞ ∞ e − s u f ( u ) d u {\displaystyle F(s)=\int _{-\infty }^{\infty }e^{-su}\ f(u)\ {\text{d}}u} and G ( s ) = ∫ − ∞ ∞ e − s v g ( v ) d v {\displaystyle G(s)=\int _{-\infty }^{\infty }e^{-sv}\ g(v)\ {\text{d}}v} respectively, the convolution operation ( f ∗ g ) ( t ) {\displaystyle (fg)(t)} can be defined as the inverse Laplace transform of the product of F ( s ) {\displaystyle F(s)} and G ( s ) {\displaystyle G(s)} . More precisely, F ( s ) ⋅ G ( s ) = ∫ − ∞ ∞ e − s u f ( u ) d u ⋅ ∫ − ∞ ∞ e − s v g ( v ) d v = ∫ − ∞ ∞ ∫ − ∞ ∞ e − s ( u + v ) f ( u ) g ( v ) d u d v {\displaystyle {\begin{aligned}F(s)\cdot G(s)&=\int _{-\infty }^{\infty }e^{-su}\ f(u)\ {\text{d}}u\cdot \int _{-\infty }^{\infty }e^{-sv}\ g(v)\ {\text{d}}v\\&=\int _{-\infty }^{\infty }\int _{-\infty }^{\infty }e^{-s(u+v)}\ f(u)\ g(v)\ {\text{d}}u\ {\text{d}}v\end{aligned}}} Let t = u + v {\displaystyle t=u+v} , then F ( s ) ⋅ G ( s ) = ∫ − ∞ ∞ ∫ − ∞ ∞ e − s t f ( u ) g ( t − u ) d u d t = ∫ − ∞ ∞ e − s t ∫ − ∞ ∞ f ( u ) g ( t − u ) d u ⏟ ( f ∗ g ) ( t ) d t = ∫ − ∞ ∞ e − s t ( f ∗ g ) ( t ) d t . {\displaystyle {\begin{aligned}F(s)\cdot G(s)&=\int _{-\infty }^{\infty }\int _{-\infty }^{\infty }e^{-st}\ f(u)\ g(t-u)\ {\text{d}}u\ {\text{d}}t\\&=\int _{-\infty }^{\infty }e^{-st}\underbrace {\int _{-\infty }^{\infty }f(u)\ g(t-u)\ {\text{d}}u} _{(fg)(t)}\ {\text{d}}t\\&=\int _{-\infty }^{\infty }e^{-st}(fg)(t)\ {\text{d}}t.\end{aligned}}} Note that F ( s ) ⋅ G ( s ) {\displaystyle F(s)\cdot G(s)} is the bilateral Laplace transform of ( f ∗ g ) ( t ) {\displaystyle (fg)(t)} . A similar derivation can be done using the unilateral Laplace transform (one-sided Laplace transform). The convolution operation also describes the output (in terms of the input) of an important class of operations known as linear time-invariant (LTI). See LTI system theory for a derivation of convolution as the result of LTI constraints. In terms of the Fourier transforms of the input and output of an LTI operation, no new frequency components are created. The existing ones are only modified (amplitude and/or phase). In other words, the output transform is the pointwise product of the input transform with a third transform (known as a transfer function). See Convolution theorem for a derivation of that property of convolution. Conversely, convolution can be derived as the inverse Fourier transform of the pointwise product of two Fourier transforms. == Visual explanation == == Historical developments == One of the earliest uses of the convolution integral appeared in D'Alembert's derivation of Taylor's theorem in Recherches sur différents points importants du système du monde, published in 1754. Also, an expression of the type: ∫ f ( u ) ⋅ g ( x − u ) d u {\displaystyle \int f(u)\cdot g(x-u)\,du} is used by Sylvestre François Lacroix on page 505 of his book entitled Treatise on differences and series, which is the last of 3 volumes of the encyclopedic series: Traité du calcul différentiel et du calcul intégral, Chez Courcier, Paris, 1797–1800. Soon thereafter, convolution operations appear in the works of Pierre Simon Laplace, Jean-Baptiste Joseph Fourier, Siméon Denis Poisson, and others. The term itself did not come into wide use until the 1950s or 1960s. Prior to that it was sometimes known as Faltung (which means folding in German), composition product, superposition integral, and Carson's integral. Yet it appears as early as 1903, though the definition is rather unfamiliar in older uses. The operation: ∫ 0 t φ ( s ) ψ ( t − s ) d s , 0 ≤ t < ∞ , {\displaystyle \int _{0}^{t}\varphi (s)\psi (t-s)\,ds,\quad 0\leq t<\infty ,} is a particular case of composition products considered by the Italian mathematician Vito Volterra in 1913. == Circular c

  Read more →
• 

  Information quality

  Information quality (IQ) is a contextual property of or a perspective to the content within information systems. There exist two complementary yet partially conflicting definitions of high-quality: firstly, information is considered high quality if it is fit for its intended purpose ; secondly, it is deemed high quality if it conforms to specified requirements . The primary distinction between these definitions is that Juran's perspective focuses on the suitability of information for its intended purpose, which can be measured by the success of its application even without direct access to or exact knowledge of the data. For example, a black-box AI with access to English Wikipedia can work well for users' purposes but using Estonian Wikipedia fails for the same purposes. Given that the AI remains the same, it can be concluded that English version data would be of higher quality in comparison to Estonian version, even without exact comparison of data contents and their properties in each version. In contrast, Crosby emphasizes adherence to predefined specifications, assuming specific criteria rather than measuring the success of its use; for instance, information in Wikipedia could be proven to be good based on criteria such as existing peer validation and academic references, even if the AI results are poor. This approach falls into problems when data is not completely accessible or all quality properties cannot be known and measured leading to false impression of quality due to lacking and misleading metrics. Numerous IQ frameworks and methodologies provide tangible approach to assess and measure DQ/IQ in a robust and rigorous manner. == Conceptual problems == Although the foundational definitions are usable for most everyday purposes, specialists often use more complex models for information quality. It has been suggested, however, that higher the quality the greater will be the confidence in meeting more general, less specific contexts. == Dimensions and metrics of information quality == "Information quality" is a measure of its fitness for use or conformance to requirements. In this way, "quality" is considered contextual and it can then vary across users and uses of the information. The exact degree of quality is often described with dimensions such as accuracy, timeliness, completeness, and similar scales. Although a huge amount of academic research has been directed to these dimensions, there does not exist consensus on their definitions or practical usefulness . Historically, Richard Wang and Diane Strong proposed a list of dimensions or elements used in assessing Information Quality is: Intrinsic IQ: accuracy, objectivity, believability, reputation Contextual IQ: relevance, value-added, timeliness, completeness, amount of information Representational IQ: interpretability, format, coherence, compatibility Accessibility IQ: accessibility, access security Other authors propose similar but different lists of dimensions for analysis, and emphasize measurement and reporting as information quality metrics. Larry English prefers the term "characteristics" to dimensions. However, a considerable amount of information quality research involves investigating and describing various categories of desirable attributes (or dimensions) of data. Research has recently shown the huge diversity of terms and classification structures used. === Quality metrics === Source: Authority/verifiability Authority refers to the expertise or recognized official status of a source. Consider the reputation of the author and publisher. When working with legal or government information, consider whether the source is the official provider of the information. Verifiability refers to the ability of a reader to verify the validity of the information irrespective of how authoritative the source is. To verify the facts is part of the duty of care of the journalistic deontology, as well as, where possible, to provide the sources of information so that they can be verified Scope of coverage Scope of coverage refers to the extent to which a source explores a topic. Consider time periods, geography or jurisdiction and coverage of related or narrower topics. Composition and organization Composition and organization has to do with the ability of the information source to present its particular message in a coherent, logically sequential manner. Objectivity Objectivity is the bias or opinion expressed when a writer interprets or analyze facts. Consider the use of persuasive language, the source's presentation of other viewpoints, its reason for providing the information and advertising. Integrity Adherence to moral and ethical principles; soundness of moral character The state of being whole, entire, or undiminished Comprehensiveness Of large scope; covering or involving much; inclusive: a comprehensive study. Comprehending mentally; having an extensive mental grasp. Insurance. covering or providing broad protection against loss. Validity Validity of some information has to do with the degree of obvious truthfulness which the information carries Uniqueness As much as 'uniqueness' of a given piece of information is intuitive in meaning, it also significantly implies not only the originating point of the information but also the manner in which it is presented and thus the perception which it conjures. The essence of any piece of information we process consists to a large extent of those two elements. Timeliness Timeliness refers to information that is current at the time of publication. Consider publication, creation and revision dates. Beware of Web site scripting that automatically reflects the current day's date on a page. Reproducibility (utilized primarily when referring to instructive information) Means that documented methods are capable of being used on the same data set to achieve a consistent result. == Professional associations == IQ International—the International Association for Information and Data Quality IQ International is a not-for-profit, vendor neutral, professional association formed in 2004, dedicated to building the information and data quality profession. CDOIQ Society Chief Data Officers and Information Quality Society is a global professional society supporting data leaders with networking, meetings, best practices, experience, certification, and training. == Information quality conferences == A number of major conferences relevant to information quality are held annually: Annual MIT Chief Data Officer & Information Quality (CDOIQ) Symposium Annual conferences held at the Massachusetts Institute of Technology, Cambridge, MA, USA Data Governance and Information Quality Conference Commercial conferences held each year in the USA Data Quality Asia Pacific Commercial conference held annually in Sydney or Melbourne, Australia Enterprise Data and Business Intelligence Conference Europe Commercial conferences held annually in London, England. Information and Data Quality Conference Not for profit conference run annually by IQ International (the International Association for Information and Data Quality) in the USA International Conference on Information Quality Academic Conference launched through MITIQ held annually at a University Master Data Management & Data Governance Conferences Six major conferences are run annually by the MDM Institute in venues such as London, San Francisco, Sydney, Toronto, Madrid, Frankfurt, Shanghai and New York City.

  Read more →
• 

  Automated journalism

  Automated journalism, also known as algorithmic journalism or robot journalism, is a term that attempts to describe modern technological processes that are now in use in the journalistic profession, such as news articles and videos generated by computer programs. There are four main fields of application for automated journalism, namely automated content production, data mining, news dissemination and content optimization. Through generative artificial intelligence, stories are produced automatically by computers rather than human reporters. In the 2020s, generative pre-trained transformers have enabled the generation of articles, simply by providing prompts. Automated journalism is sometimes seen as an opportunity to free journalists from routine reporting, providing them with more time for complex tasks. It also allows efficiency and cost-cutting, alleviating some financial burden that many news organizations face. However, automated journalism is also perceived as a threat to the authorship and quality of news and a threat to the livelihoods of human journalists. == History == Historically, the process involved an algorithm that scanned large amounts of provided data, selected from an assortment of pre-programmed article structures, ordered key points, and inserted details such as names, places, amounts, rankings, statistics, and other figures. These programs interpret, organize, and present data in human-readable ways. The output can also be customized to fit a certain voice, tone, or style. Early implementations were mainly used for stories based on statistics and numerical figures. Common topics include sports recaps, weather, financial reports, real estate analysis, and earnings reviews. Data science and AI companies such as Automated Insights, Narrative Science, United Robots and Monok develop and provide these algorithms to news outlets. In 2016, early adopters included news providers such as the Associated Press, Forbes, ProPublica, and the Los Angeles Times. StatSheet, an online platform covering college basketball, runs entirely on an automated program. In 2006, Thomson Reuters announced their switch to automation to generate financial news stories on its online news platform. Reuters used a tool called Tracer. An algorithm called Quakebot published a story about a 2014 California earthquake on The Los Angeles Times website within three minutes after the shaking had stopped. The Associated Press began using automation to cover 10,000 minor baseball leagues games annually, using a program from Automated Insights and statistics from MLB Advanced Media. Outside of sports, the Associated Press also uses automation to produce stories on corporate earnings. Since 2014, Associated Press has been publishing quarterly financial stories with help from Automated Insights. In May 2020, Microsoft announced that a number of its MSN contract journalists would be replaced by robot journalism. On 8 September 2020, The Guardian published an article entirely written by the neural network GPT-3, although the published fragments were manually picked by a human editor. Agentic Tribune produces all of its news articles automatically using AI. News broadcasters in Kuwait, Greece, South Korea, India, China and Taiwan have presented news with anchors based on generative AI models, prompting concerns about job losses for human anchors and audience trust in news that has historically been influenced by parasocial relationships with broadcasters, content creators or social media influencers. Algorithmically generated anchors have also been used by allies of ISIS for their broadcasts. In 2023, Google reportedly pitched a tool to news outlets that claimed to "produce news stories" based on input data provided, such as "details of current events". Some news company executives who viewed the pitch described it as "[taking] for granted the effort that went into producing accurate and artful news stories." In February 2024, Google launched a program to pay small publishers to write three articles per day using a beta generative AI model. The program does not require the knowledge or consent of the websites that the publishers are using as sources, nor does it require the published articles to be labeled as being created or assisted by these models. Meta AI, a chatbot based on Llama 3 which summarizes news stories, was noted by The Washington Post to copy sentences from those stories without direct attribution and to potentially further decrease the traffic of online news outlets. == Benefits == === Speed === Robot reporters are built to produce large quantities of information at quicker speeds. The Associated Press announced that their use of automation has increased the volume of earnings reports from customers by more than ten times. With software from Automated Insights and data from other companies, they can produce 150 to 300-word articles in the same time it takes journalists to crunch numbers and prepare information. By automating routine stories and tasks, journalists are promised more time for complex jobs such as investigative reporting and in-depth analysis of events. Francesco Marconi of the Associated Press stated that, through automation, the news agency freed up 20 percent of reporters’ time to focus on higher-impact projects. This has also been stated by a spokesperson at Gannett, who stated "By leveraging AI, we are able to expand coverage and enable our journalists to focus on more in-depth reporting." GBH reports that AI tools help increase the reach of news publishers. Mike Carragi, a product manager at Patch, stated that they were able to increase their reach from 1200 communities to 7000 communities in just a few months without the need for new employees solely through the adoption of generative AI. In fact, many communities are served solely by AI generated content, which creates summaries of existing information within the community. === Cost === Automated journalism is cheaper because more content can be produced within less time. It also lowers labour costs for news organizations. Reduced human input means less expenses on wages or salaries, paid leaves, vacations, and employment insurance. Automation serves as a cost-cutting tool for news outlets struggling with tight budgets but still wish to maintain the scope and quality of their coverage. == Concerns == === Authorship === In an automated story, there is often confusion about who should be credited as the author. Several participants of a study on algorithmic authorship attributed the credit to the programmer; others perceived the news organization as the author, emphasizing the collaborative nature of the work. There is also no way for the reader to verify whether an article was written by a robot or human, which raises issues of transparency although such issues also arise with respect to authorship attribution between human authors too. === Credibility and quality === Concerns about the perceived credibility of automated news is similar to concerns about the perceived credibility of news in general. Critics doubt if algorithms are "fair and accurate, free from subjectivity, error, or attempted influence." Again, these issues about fairness, accuracy, subjectivity, error, and attempts at influence or propaganda has also been present in articles written by humans over thousands of years. A common criticism is that machines do not replace human capabilities such as creativity, humour, and critical-thinking. However, as the technology evolves, the aim is to mimic human characteristics. When the UK's Guardian newspaper used an AI to write an entire article in September 2020, commentators pointed out that the AI still relied on human editorial content. Austin Tanney, the head of AI at Kainos said: "The Guardian got three or four different articles and spliced them together. They also gave it the opening paragraph. It doesn’t belittle what it is. It was written by AI, but there was human editorial on that." The largest single study of readers' evaluations of news articles produced with and without the help of automation exposed 3,135 online news consumers to 24 articles. It found articles that had been automated were significantly less comprehensible, in part because they were considered to contain too many numbers. However, the automated articles were evaluated equally on other criteria including tone, narrative flow, and narrative structure. Beyond human evaluation, there are now numerous algorithmic methods to identify machine written articles although some articles may still contain errors that are obvious for a human to identify, they can at times score better with these automatic identifiers than human-written articles. A 2017 Nieman Reports article by Nicola Bruno discusses whether or not machines will replace journalists and addresses concerns around the concept of automated journalism practices. Ultimately, Bruno came to the conclusion that AI would assist journalist

  Read more →
• 

  Data (word)

  The word data is most often used as a singular collective mass noun in educated everyday usage. However, due to the history and etymology of the word, considerable controversy has existed on whether it should be considered a mass noun used with verbs conjugated in the singular, or should be treated as the plural of the now-rarely-used datum. == Usage in English == In one sense, data is the plural form of datum. Datum actually can also be a count noun with the plural datums (see usage in datum article) that can be used with cardinal numbers (e.g., "80 datums"); data (originally a Latin plural) is not used like a normal count noun with cardinal numbers and can be plural with plural determiners such as these and many, or it can be used as a mass noun with a verb in the singular form. Even when a very small quantity of data is referenced (one number, for example), the phrase piece of data is often used, as opposed to datum. The debate over appropriate usage continues, but "data" as a singular form is far more common. In English, the word datum is still used in the general sense of "an item given". In cartography, geography, nuclear magnetic resonance and technical drawing, it is often used to refer to a single specific reference datum from which distances to all other data are measured. Any measurement or result is a datum, though data point is now far more common. Data is indeed most often used as a singular mass noun in educated everyday usage. Some major newspapers, such as The New York Times, use it either in the singular or plural. In The New York Times, the phrases "the survey data are still being analyzed" and "the first year for which data is available" have appeared within one day. The Wall Street Journal explicitly allows this usage in its style guide. The Associated Press style guide classifies data as a collective noun that takes the singular when treated as a unit but the plural when referring to individual items (e.g., "The data is sound" and "The data have been carefully collected"). In scientific writing, data is often treated as a plural, as in These data do not support the conclusions, but the word is also used as a singular mass entity like information (e.g., in computing and related disciplines). British usage now widely accepts treating data as singular in standard English, including everyday newspaper usage at least in non-scientific use. UK scientific publishing still prefers treating it as a plural. Some UK university style guides recommend using data for both singular and plural use, and others recommend treating it only as a singular in connection with computers. The IEEE Computer Society allows usage of data as either a mass noun or plural based on author preference, while IEEE in the editorial style manual indicates to always use the plural form. Some professional organizations and style guides require that authors treat data as a plural noun. For example, the Air Force Flight Test Center once stated that the word data is always plural, never singular.

  Read more →
• 

  Unspent transaction output

  In cryptocurrencies, an unspent transaction output (UTXO, often capitalized as UTxO) is a distinctive element in a subset of digital currency models. A UTXO represents a certain amount of cryptocurrency that has been authorized by a sender and is available to be spent by a recipient. The utilization of UTXOs in transaction processes is a key feature of many cryptocurrencies, but it primarily characterizes those implementing the UTXO model. UTXOs employ public key cryptography to ascertain and transfer ownership. More specifically, the recipient's public key is formatted into the UTXO, thereby limiting the capability to spend the UTXO to the account that can demonstrate ownership of the corresponding private key. A valid digital signature associated with the public key must be included for the UTXO to be spent. In the UTXO model, each unit of currency is treated as a discrete object. The history of a UTXO is documented only within the blocks where it is transferred. To ascertain the total balance of an account, one must scan each block to find the latest UTXOs linked to that account. While all nodes within a blockchain network must consent to the block history, the blocks relevant to an account's balance are unique to that account. UTXOs constitute a chain of ownership depicted as a series of digital signatures dating back to the coin's inception, regardless of whether the coin was minted via mining, staking, or another procedure determined by the cryptocurrency protocol. The UTXO model was invented for Bitcoin. Cardano uses an extended version of the UTXO model known as EUTXO. == Origins == The conceptual framework of the UTXO model can be traced back to Hal Finney's Reusable Proofs of Work proposal, which itself was based on Adam Back's 1997 Hashcash proposal. Bitcoin, released in 2009, was the first widespread implementation of the UTXO model in practice. == UTXO model vs. account Model == Cryptocurrencies that utilize the UTXO model function differently compared to those using the account model. In the UTXO model, individual units of cryptocurrency, termed as unspent transaction outputs (UTXOs), are transferred between users, analogous to the exchange of physical cash. This model impacts how transactions and ownership are recorded and verified within the blockchain network. The account model preserves a record of each account and its corresponding balance for every block added to the network. This setup enables quicker balance verification without the need to scan historical blocks, but it increases the raw size of each block (though data compression techniques can be utilized to alleviate this). However, both models necessitate the inspection of past blocks to fully authenticate the origin of coins. In the UTXO model, each object is immutable - units of coins cannot be 'edited' in the same way an account balance is modified when a transaction occurs. Rather, the balance is computed from the transaction history dating back to when the coins were first minted. This simplicity enhances security, as a UTXO either exists in its anticipated form or it does not. In contrast, the account model requires meticulous verification of the account's status during transactions, which can lead to oversights if not conducted correctly. In valid blockchain transactions, only unspent outputs (UTXOs) are permissible for funding subsequent transactions. This requirement is critical to prevent double-spending and fraud. Accordingly, inputs in a transaction are removed from the UTXO set, while outputs create new UTXOs that are added to the set. The holders of private keys, such as those with cryptocurrency wallets, can utilize these UTXOs for future transactions.

  Read more →
• 

  AI-assisted reverse engineering

  AI-assisted reverse engineering (AIARE) is a branch of computer science that leverages artificial intelligence (AI), notably machine learning (ML) strategies, to augment and automate the process of reverse engineering. The latter involves breaking down a product, system, or process to comprehend its structure, design, and functionality. AIARE was primarily introduced in the early years of the 21st century, witnessing substantial advancements from the mid-2010s onwards. == Overview == Conventionally, reverse engineering is conducted by specialists who dismantle a system to grasp its working principles, often for the purposes of reproduction, modification, enhancement of compatibility, or forensic examination. This method, while efficient, can be laborious and time-intensive, particularly when dealing with intricate software or hardware systems. AIARE integrates machine learning algorithms to either partially automate or augment this process. It is capable of detecting patterns, relationships, structures, and potential vulnerabilities within the analyzed system, frequently surpassing human experts in speed and accuracy. This has rendered AIARE a critical tool in numerous fields, including cybersecurity, software development, and hardware design and analysis. == Techniques == AIARE encompasses several AI methodologies: === Supervised learning === Supervised learning employs tagged data to train models to recognize system components, their operations, and their interconnections. This method is particularly helpful in software analysis to discover vulnerabilities or enhance compatibility. === Unsupervised learning === Unsupervised learning is utilized to detect concealed patterns and structures in untagged data. It proves beneficial in comprehending complex systems where there's no evident labeling or mapping of components. === Reinforcement learning === Reinforcement learning is employed to build models that progressively refine their system understanding through a process of trial and error. This method is often implemented when deciphering a system's functionality under various circumstances or configurations. === Deep learning === Deep learning is employed for analysis of high-dimensional data. For instance, deep learning techniques can aid in examining the layout and connections of integrated circuits (ICs), substantially reducing the manual effort required for reverse engineering. == Benefits == === Usable Security === AIARE expands usable security as reverse engineering is traditionally slow and highly specialized as it produces dense, low-level information (usually in Assembly or C) when using tools like Ghidra. The use of multiple different methods to interface with models today (such as through chat bots like ChatGPT) greatly reduces the barrier to entry by providing a clear way to interact with the user and even providing meaningful decompiled source code. In addition, either done automatically or through prompt engineering, a model is capable of producing a high-level summary and explanation of its reverse engineering efforts in human-readable form that doesn't require much knowledge on code. === Speedup === AIARE is capable of processing data much faster than humans, providing a boost in speed when analyzing said data. In the context of computer security, this can greatly speed up incident management or response and malware detection as AIARE can be automated to drastically reduce the manual effort usually associated with reverse engineering. == Limitations == In an effort to improve readability for reverse engineering, AI-generated code may introduce erroneous bugs not present in the source. This compromises the correctness of the code if not carefully validated and will throw off reverse engineering efforts. Additionally, AIARE's weakness in zero-shot prompting makes gathering accurate data without reference data in the prompt more inconsistent, thus requiring a user to provide some quality data of their own that hurts its usability.

  Read more →
• 

  Time Warp Edit Distance

  In the data analysis of time series, Time Warp Edit Distance (TWED) is a measure of similarity (or dissimilarity) between pairs of discrete time series, controlling the relative distortion of the time units of the two series using the physical notion of elasticity. In comparison to other distance measures, (e.g. DTW (dynamic time warping) or LCS (longest common subsequence problem)), TWED is a metric. Its computational time complexity is O ( n 2 ) {\displaystyle O(n^{2})} , but can be drastically reduced in some specific situations by using a corridor to reduce the search space. Its memory space complexity can be reduced to O ( n ) {\displaystyle O(n)} . It was first proposed in 2009 by P.-F. Marteau. == Definition == δ λ , ν ( A 1 p , B 1 q ) = M i n { δ λ , ν ( A 1 p − 1 , B 1 q ) + Γ ( a p ′ → Λ ) d e l e t e i n A δ λ , ν ( A 1 p − 1 , B 1 q − 1 ) + Γ ( a p ′ → b q ′ ) m a t c h o r s u b s t i t u t i o n δ λ , ν ( A 1 p , B 1 q − 1 ) + Γ ( Λ → b q ′ ) d e l e t e i n B {\displaystyle \delta _{\lambda ,\nu }(A_{1}^{p},B_{1}^{q})=Min{\begin{cases}\delta _{\lambda ,\nu }(A_{1}^{p-1},B_{1}^{q})+\Gamma (a_{p}^{'}\to \Lambda )&{\rm {delete\ in\ A}}\\\delta _{\lambda ,\nu }(A_{1}^{p-1},B_{1}^{q-1})+\Gamma (a_{p}^{'}\to b_{q}^{'})&{\rm {match\ or\ substitution}}\\\delta _{\lambda ,\nu }(A_{1}^{p},B_{1}^{q-1})+\Gamma (\Lambda \to b_{q}^{'})&{\rm {delete\ in\ B}}\end{cases}}} whereas Γ ( α p ′ → Λ ) = d L P ( a p ′ , a p − 1 ′ ) + ν ⋅ ( t a p − t a p − 1 ) + λ {\displaystyle \Gamma (\alpha _{p}^{'}\to \Lambda )=d_{LP}(a_{p}^{'},a_{p-1}^{'})+\nu \cdot (t_{a_{p}}-t_{a_{p-1}})+\lambda } Γ ( α p ′ → b q ′ ) = d L P ( a p ′ , b q ′ ) + d L P ( a p − 1 ′ , b q − 1 ′ ) + ν ⋅ ( | t a p − t b q | + | t a p − 1 − t b q − 1 | ) {\displaystyle \Gamma (\alpha _{p}^{'}\to b_{q}^{'})=d_{LP}(a_{p}^{'},b_{q}^{'})+d_{LP}(a_{p-1}^{'},b_{q-1}^{'})+\nu \cdot (|t_{a_{p}}-t_{b_{q}}|+|t_{a_{p-1}}-t_{b_{q-1}}|)} Γ ( Λ → b q ′ ) = d L P ( b p ′ , b p − 1 ′ ) + ν ⋅ ( t b q − t b q − 1 ) + λ {\displaystyle \Gamma (\Lambda \to b_{q}^{'})=d_{LP}(b_{p}^{'},b_{p-1}^{'})+\nu \cdot (t_{b_{q}}-t_{b_{q-1}})+\lambda } Whereas the recursion δ λ , ν {\displaystyle \delta _{\lambda ,\nu }} is initialized as: δ λ , ν ( A 1 0 , B 1 0 ) = 0 , {\displaystyle \delta _{\lambda ,\nu }(A_{1}^{0},B_{1}^{0})=0,} δ λ , ν ( A 1 0 , B 1 j ) = ∞ f o r j ≥ 1 {\displaystyle \delta _{\lambda ,\nu }(A_{1}^{0},B_{1}^{j})=\infty \ {\rm {{for\ }j\geq 1}}} δ λ , ν ( A 1 i , B 1 0 ) = ∞ f o r i ≥ 1 {\displaystyle \delta _{\lambda ,\nu }(A_{1}^{i},B_{1}^{0})=\infty \ {\rm {{for\ }i\geq 1}}} with a 0 ′ = b 0 ′ = 0 {\displaystyle a'_{0}=b'_{0}=0} === Implementations === An implementation of the TWED algorithm in C with a Python wrapper is available at TWED is also implemented into the Time Series Subsequence Search Python package (TSSEARCH for short) available at [1]. An R implementation of TWED has been integrated into the TraMineR, a R package for mining, describing and visualizing sequences of states or events, and more generally discrete sequence data. Additionally, cuTWED is a CUDA- accelerated implementation of TWED which uses an improved algorithm due to G. Wright (2020). This method is linear in memory and massively parallelized. cuTWED is written in CUDA C/C++, comes with Python bindings, and also includes Python bindings for Marteau's reference C implementation. ==== Python ==== Backtracking, to find the most cost-efficient path: ==== MATLAB ==== Backtracking, to find the most cost-efficient path:

  Read more →
• 

  Technical data management system

  A technical data management system (TDMS) is a document management system (DMS) pertaining to the management of technical and engineering drawings and documents. Often the data are contained in 'records' of various forms, such as on paper, microfilms or digital media. Hence technical data management is also concerned with record management involving technical data. Technical document management systems are used within large organisations with large scale projects involving engineering. For example, a TDMS can be used for integrated steel plants (ISP), automobile factories, aero-space facilities, infrastructure companies, city corporations, research organisations, etc. In such organisations, technical archives or technical documentation centres are created as central facilities for effective management of technical data and records. TDMS functions are similar to that of conventional archive functions in concepts, except that the archived materials in this case are essentially engineering drawings, survey maps, technical specifications, plant and equipment data sheets, feasibility reports, project reports, operation and maintenance manuals, standards, etc. Document registration, indexing, repository management, reprography, etc. are parts of TDMS. Various kinds of sophisticated technologies such as document scanners, microfilming and digitization camera units, wide format printers, digital plotters, software, etc. are available, making TDMS functions an easier process than previous times. == Constituents of a technical data management system == Technical data refers to both scientific and technical information recorded and presented in any form or manner (excluding financial and management information). A Technical Data Management System is created within an organisation for archiving and sharing information such as technical specifications, datasheets and drawings. Similar to other types of data management system, a Technical Data Management System consists of the 4 crucial constituents mentioned below. === Data planning === Data plans (long-term or short-term) are constructed as the first essential step of a proper and complete TDMS. It is created to ultimately help with the 3 other constituents, data acquisition, data management and data sharing. A proper data plan should not exceed 2 pages and should address the following basics: Types of data (samples, experiment results, reports, drawings, etc.) and metadata (data that summarizes and describes other data. In this case, it refers to details such as sample sizes, experiment conditions and procedures, dates of reports, explanations of drawings, etc.) Means of researches and collections of data (field works, experiments in production lines, etc.) Costs of researches Policies for access, sharing (re-use within the organisation and re-distribution to the public) Proposals for archiving data and maintaining access to it === Data acquisition === Raw data is collected from primary sites of the organisations through the use of modern technologies. Please reference the table below for examples. The data collected is then transferred to technical data centres for data management. === Data management === After data acquisition, data is sorted out, whilst useful data is archived, unwanted data is disposed. When managing and archiving data, the features below of the data are considered. Names, labels, values and descriptions for variables and records. (In the case of TDMS, one example is names of equipments on an equipment datasheet) Derived data from the original data, with code, algorithm or command file used to create them. (In the case of TDMS, one example is an expectation report derived from the analysis of an equipment datasheet) Metadata associates with the data being archived === Data sharing === Archived and managed data are accessible to rightful entities. A proper and complete TDMS should share data to a suitable extent, under suitable security, in order to achieve optimal usage of data within the organisation. It aims for easy access when reused by other researchers and hence it enhances other research processes. Data is often referred in other tests and technical specifications, where new analysis is generated, managed and archived again. As a result, data is flowing within the organisation under effective management through the use of TDMS. == Advantages and disadvantages of usage of technical data management systems == There are strengths and weakness when using technical data management systems (TDMS) to archive data. Some of the advantages and disadvantages are listed below. === Advantages === ==== 1. Faster and easier data management ==== Since TDMS is integrated into the organisation's systems, whenever workers develop data files (SolidWorks, AutoCAD, Microsoft Word, etc.), they can also archive and manage data, linking what they need to their current work, at the same time they can also update the archives with useful data. This speeds up working processes and makes them more efficient. ==== 2. Increased security ==== All data files are centralized, hence internal and external data leakages are less likely to happen, and the data flow is more closely monitored. As a result, data in the organisation is more secured. ==== 3. Increased collaboration within the organisation ==== Since the data files are centralized and the data flow within the organisation increases, researchers and workers within the organisation are able to work on joint projects. More complex tasks can be performed for higher yields. ==== 4. Compatible to various formats of data ==== TDMS is compatible to many formats of data, from basic data like Microsoft Words to complex data like voice data. This enhances the quality of the management of data archived. === Disadvantages === ==== 1. Higher financial costs ==== Implementing TDMS into the organisation's systems involves monetary costs. Maintenance costs certain amount of human resources and money as well. These resources involve opportunity costs as they can be utilized in other aspects. ==== 2. Lower stability ==== Since TDMS manages and centralizes all the data the organisation processes, it links the working processes within the whole organisation together. It also increases the vulnerability of the organisation data network. If TDMS is not stable enough or when it is exposed to hacker and virus attacks, the organisation's data flow might shut down completely, affecting the work in an organisation-wide scale and leading to a lower stability as results. == Comparison between traditional data management approaches and technical data management systems == Test engineers and researchers are facing great challenges in turning complex test results and simulation data into usable information for higher yields of firms. These challenges are listed below. Increase in complication of designs Reduced in time and budgets available Higher quality is demanded === Traditional data management approaches === Many organisations are still applying the conventional file management systems, due to the difficulty in building a proper and complete archives for data management. The first approach is the simple file-folder system. This costs the problem of ineffectiveness as workers and researchers have to manually go through numerous layers of systems and files for the target data. Moreover, the target data may contain files with different formats and these files may not be stored in the same machine. These files are also easily lost if renamed or moved to another location. The second approach is conventional databases such as Oracle. These databases are capable of enabling easy search and access of data. However, a great drawback is that huge effort for preparing and modeling the data is required. For large-scale projects, huge monetary costs are induced, and extra IT human resources must be employed for constant handling, expanding and maintaining the inflexible system, which is custom for specific tasks, instead of all tasks. In the long-term, it is not cost-effective. === Technical data management systems (TDMS) === TDMS is developed based on 3 principles, flexible and organized file storage, self-scaling hybrid data index, and an interactive post-processing environment. The system in practical, mainly consists of 3 components, data files with essential and relevant Metadata, data finders for organizing and managing data regardless of files formats, and, a software of searching, analyzing and reporting. With metadata attached to original data files, the data finder can identify different related data files during searches, even if they are in different file formats. TDMS hence allows researchers to search for data like browsing the Internet. Last but not least, it can adapt to changes and update itself according to the changes, unlike databases. == Comparison between strong information systems and weak information systems == Complex organizations may need large amounts

  Read more →
• 

  AIX Toolbox for Linux Applications

  The AIX Toolbox for Linux Applications is a collection of GNU tools for IBM AIX. These tools are available for installation using Red Hat's RPM format. == Licensing == Each of these packages includes its own licensing information and while IBM has made the code available to AIX users, the code is provided as is and has not been thoroughly tested. The Toolbox is meant to provide a core set of some of the most common development tools and libraries along with the more popular GNU packages.

  Read more →
• 

  Information access

  Information access is the freedom or ability to identify, obtain and make use of database or information effectively. There are various research efforts in information access for which the objective is to simplify and make it more effective for human users to access and further process large and unwieldy amounts of data and information. == Technology == Several technologies applicable to the general area are Information Retrieval, Text Mining, Machine Translation, and Text Categorisation. During discussions on free access to information as well as on information policy, information access is understood as concerning the insurance of free and closed access to information. Information access covers many issues including copyright, open source, privacy, and security. == Groups == Groups such as the American Library Association, the American Association of Law Libraries, Ralph Nader's Taxpayers Assets Project have advocated for free access to legal information. The vendor neutral citation movement in the legal field is working to ensure that courts will accept citations from cases on the web which do not have the traditional (copyrighted) page numbers from the West Publishing company. There is a worldwide Free Access to Law Movement which advocates free access to legal information. The Wired article "Who Owns The Law" is an introduction to the access to legal information issue. Postsecondary organizations such as K-12 work to share information. They feel it is a legal and moral obligation to provide access (including to people with disabilities or impairments) to information through the services and programs they offer. Some effects of charging for information access, such as literature searches for physicians, is studied in the article "Fee or Free: The Effect of Charging on Information Demand". In this study, a $5 charge resulted in a 77% decrease in searches.

  Read more →
• 

  Metadirectory

  A metadirectory system provides for the flow of data between one or more directory services and databases in order to maintain synchronization of that data. It is an important part of identity management systems. The data being synchronized typically are collections of entries that contain user profiles and possibly authentication or policy information. Most metadirectory deployments synchronize data into at least one LDAP-based directory server, to ensure that LDAP-based applications such as single sign-on and portal servers have access to recent data, even if the data is mastered in a non-LDAP data source. Metadirectory products support filtering and transformation of data in transit. Most identity management suites from commercial vendors include a metadirectory product, or a user provisioning product.

  Read more →