AI Email Reply Free

AI Email Reply Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Sentence extraction

    Sentence extraction

    Sentence extraction is a technique used for automatic summarization of a text. In this shallow approach, statistical heuristics are used to identify the most salient sentences of a text. Sentence extraction is a low-cost approach compared to more knowledge-intensive deeper approaches which require additional knowledge bases such as ontologies or linguistic knowledge. In short, sentence extraction works as a filter that allows only meaningful sentences to pass. The major downside of applying sentence-extraction techniques to the task of summarization is the loss of coherence in the resulting summary. Nevertheless, sentence extraction summaries can give valuable clues to the main points of a document and are frequently sufficiently intelligible to human readers. == Procedure == Usually, a combination of heuristics is used to determine the most important sentences within the document. Each heuristic assigns a (positive or negative) score to the sentence. After all heuristics have been applied, the highest-scoring sentences are included in the summary. The individual heuristics are weighted according to their importance. === Early approaches and some sample heuristics === Seminal papers which laid the foundations for many techniques used today have been published by Hans Peter Luhn in 1958 and H. P Edmundson in 1969. Luhn proposed to assign more weight to sentences at the beginning of the document or a paragraph. Edmundson stressed the importance of title-words for summarization and was the first to employ stop-lists in order to filter uninformative words of low semantic content (e.g. most grammatical words such as of, the, a). He also distinguished between bonus words and stigma words, i.e. words that probably occur together with important (e.g. the word form significant) or unimportant information. His idea of using key-words, i.e. words which occur significantly frequently in the document, is still one of the core heuristics of today's summarizers. With large linguistic corpora available today, the tf–idf value which originated in information retrieval, can be successfully applied to identify the key words of a text: If for example the word cat occurs significantly more often in the text to be summarized (TF = "term frequency") than in the corpus (IDF means "inverse document frequency"; here the corpus is meant by document), then cat is likely to be an important word of the text; the text may in fact be a text about cats.

    Read more →
  • Feed forward (control)

    Feed forward (control)

    A feed forward (sometimes written feedforward) is an element or pathway within a control system that passes a controlling signal from a source in its external environment to a load elsewhere in its external environment. This is often a command signal from an external operator. In control engineering, a feedforward control system is a control system that uses sensors to detect disturbances affecting the system and then applies an additional input to minimize the effect of the disturbance. This requires a mathematical model of the system so that the effect of disturbances can be properly predicted. A control system which has only feed-forward behavior responds to its control signal in a pre-defined way without responding to the way the system reacts; it is in contrast with a system that also has feedback, which adjusts the input to take account of how it affects the system, and how the system itself may vary unpredictably. In a feed-forward system, the control variable adjustment is not error-based. Instead it is based on knowledge about the process in the form of a mathematical model of the process and knowledge about, or measurements of, the process disturbances. Some prerequisites are needed for control scheme to be reliable by pure feed-forward without feedback: the external command or controlling signal must be available, and the effect of the output of the system on the load should be known (that usually means that the load must be predictably unchanging with time). Sometimes pure feed-forward control without feedback is called 'ballistic', because once a control signal has been sent, it cannot be further adjusted; any corrective adjustment must be by way of a new control signal. In contrast, 'cruise control' adjusts the output in response to the load that it encounters, by a feedback mechanism. These systems could relate to control theory, physiology, or computing. == Overview == With feed-forward or feedforward control, the disturbances are measured and accounted for before they have time to affect the system. In the house example, a feed-forward system may measure the fact that the door is opened and automatically turn on the heater before the house can get too cold. The difficulty with feed-forward control is that the effects of the disturbances on the system must be accurately predicted, and there must not be any unmeasured disturbances. For instance, if a window was opened that was not being measured, the feed-forward-controlled thermostat might let the house cool down. The term has specific meaning within the field of CPU-based automatic control. The discipline of feedforward control as it relates to modern, CPU based automatic controls is widely discussed, but is seldom practiced due to the difficulty and expense of developing or providing for the mathematical model required to facilitate this type of control. Open-loop control and feedback control, often based on canned PID control algorithms, are much more widely used. There are three types of control systems: open-loop, feed-forward, and feedback. An example of a pure open-loop control system is manual non-power-assisted steering of a motor car; the steering system does not have access to an auxiliary power source and does not respond to varying resistance to turning of the direction wheels; the driver must make that response without help from the steering system. In comparison, power steering has access to a controlled auxiliary power source, which depends on the engine speed. When the steering wheel is turned, a valve is opened which allows fluid under pressure to turn the wheels. A sensor monitors that pressure so that the valve only opens enough to cause the correct pressure to reach the wheel turning mechanism. This is feed-forward control where the output of the system, the change in direction of travel of the vehicle, plays no part in the system. See Model predictive control. If the driver is included in the system, then they do provide a feedback path by observing the direction of travel and compensating for errors by turning the steering wheel. In that case you have a feedback system, and the block labeled System in Figure(c) is a feed-forward system. In other words, systems of different types can be nested, and the overall system regarded as a black-box. Feedforward control is distinctly different from open-loop control and teleoperator systems. Feedforward control requires a mathematical model of the plant (process and/or machine being controlled) and the plant's relationship to any inputs or feedback the system might receive. Neither open-loop control nor teleoperator systems require the sophistication of a mathematical model of the physical system or plant being controlled. Control based on operator input without integral processing and interpretation through a mathematical model of the system is a teleoperator system and is not considered feedforward control. == History == Historically, the use of the term feedforward is found in works by Harold S. Black in US patent 1686792 (invented 17 March 1923) and D. M. MacKay as early as 1956. While MacKay's work is in the field of biological control theory, he speaks only of feedforward systems. MacKay does not mention feedforward control or allude to the discipline of feedforward controls. MacKay and other early writers who use the term feedforward are generally writing about theories of how human or animal brains work. Black also has US patent 2102671 invented 2 August 1927 on the technique of feedback applied to electronic systems. The discipline of feedforward controls was largely developed by professors and graduate students at Georgia Tech, MIT, Stanford and Carnegie Mellon. Feedforward is not typically hyphenated in scholarly publications. Meckl and Seering of MIT and Book and Dickerson of Georgia Tech began the development of the concepts of Feedforward Control in the mid-1970s. The discipline of Feedforward Controls was well defined in many scholarly papers, articles and books by the late 1980s. == Benefits == The benefits of feedforward control are significant and can often justify the extra cost, time and effort required to implement the technology. Control accuracy can often be improved by as much as an order of magnitude if the mathematical model is of sufficient quality and implementation of the feedforward control law is well thought out. Energy consumption by the feedforward control system and its driver is typically substantially lower than with other controls. Stability is enhanced such that the controlled device can be built of lower cost, lighter weight, springier materials while still being highly accurate and able to operate at high speeds. Other benefits of feedforward control include reduced wear and tear on equipment, lower maintenance costs, higher reliability and a substantial reduction in hysteresis. Feedforward control is often combined with feedback control to optimize performance. == Model == The mathematical model of the plant (machine, process or organism) used by the feedforward control system may be created and input by a control engineer or it may be learned by the control system. Control systems capable of learning and/or adapting their mathematical model have become more practical as microprocessor speeds have increased. The discipline of modern feedforward control was itself made possible by the invention of microprocessors. Feedforward control requires integration of the mathematical model into the control algorithm such that it is used to determine the control actions based on what is known about the state of the system being controlled. In the case of control for a lightweight, flexible robotic arm, this could be as simple as compensating between when the robot arm is carrying a payload and when it is not. The target joint angles are adjusted to place the payload in the desired position based on knowing the deflections in the arm from the mathematical model's interpretation of the disturbance caused by the payload. Systems that plan actions and then pass the plan to a different system for execution do not satisfy the above definition of feedforward control. Unless the system includes a means to detect a disturbance or receive an input and process that input through the mathematical model to determine the required modification to the control action, it is not true feedforward control. === Open system === In control theory, an open system is a feed forward system that does not have any feedback loop to control its output. In contrast, a closed system uses on a feedback loop to control the operation of the system. In an open system, the output of the system is not fed back into the input to the system for control or operation. == Applications == === Physiological feed-forward system === In physiology, feed-forward control is exemplified by the normal anticipatory regulation of heartbeat in advance of actual physical exertion by the central autonomic network. Feed-forward

    Read more →
  • Clapper (service)

    Clapper (service)

    Clapper is an American short-form video-hosting service headquartered in Dallas, Texas. It was founded in 2020 by Edison Chen as an alternative for TikTok for mature audiences. The app is functionally similar to TikTok and includes tipping and e-commerce features. Following an influx of far-right content in early 2021, Clapper strengthened its moderation practices. It achieved 2 million monthly active users by 2023, and the number of downloads increased after a U.S. bill that would potentially ban TikTok in the country was signed in 2024. == History == With its offices in Dallas, Texas, Clapper was founded in July 2020 by Chinese-American entrepreneur Edison Chen. Chen considered that most online platforms, such as TikTok, were being targeted to young generations, such as Generation Z. He then concepted Clapper as a service with short-form content for mature audiences among Generation X and millennials, while not intending to compete directly with TikTok. Clapper averaged fewer than ten thousand daily active users during 2020, reaching 500 thousand downloads in the next year. Initially without paying for external advertising, the company raised about $3 million during a 2021 seed funding round. In 2023, the app reportedly reached about 300 to 400 thousand daily active users and 2 million monthly active users. The average user was between the ages of 35 and 55. Following the April 2024 signing of the Protecting Americans from Foreign Adversary Controlled Applications Act, which would potentially enact a ban on TikTok in the U.S. in January 2025, Clapper averaged 200 thousand weekly downloads. In 2025, before the day scheduled for the ban (January 19), TikTok users migrated to other apps. As a result, Clapper received 1.4 million new downloads in a week preceding the date. It was listed as the third most-downloaded free app on Apple's App Store on January 14, behind Xiaohongshu and Lemon8, and the term "TikTok refugee" became a trending term. == Features == Clapper presents similarities with TikTok in its layout, including "Following" and "For You" tabs with videos up to three minutes long that can be liked, commented on or shared. A "Clapback" feature allows users to create responses to videos from others. Users can create livestreams and chat rooms in the app. Users can tip Clapper creators through its Clapper Fam monetization feature, in place of in-app advertisements. The Clapper Shop allows for e-commerce between users. The service had distributed $10 million to its users in total by 2023, according to Clapper CEO Chen. == Content == Clapper includes a policy requiring users to be at least 17 years of age, although Clapper CEO Chen described that "there is no adult content" on the platform. Lindsay Dodgson of Business Insider described the content as generally outdated and "reminiscent of 'getting owned' compilations of the earlier internet." The Washington Post's Tatum Hunter characterized Clapper as including sexual or engagement baiting content more prevalently than TikTok. === Moderation === Clapper's team, which had fifteen employees in early 2021, initially stated it would not moderate content as strictly as TikTok and would mostly rely on user reports. Following that year's January 6 United States Capitol attack, far-right conservative videos promoting QAnon and anti-vaccine conspiracy theories appeared on Clapper's "For You" page to a substantial degree for weeks. The videos were made in protest against decisions by platforms, particularly TikTok, to ban such content. Clapper's team stated in January 10 that its rules prohibiting incitements to violence would be strictly enforced. By February, videos and accounts promoting the conspiracy theories had been removed, and QAnon-related content was banned permanently. Clapper's team hired more content auditors and implemented moderation by artificial intelligence for further community guideline violations.

    Read more →
  • Scan line

    Scan line

    A scan line (also scanline) is one line, or row, in a raster scanning pattern, such as a line of video on a cathode-ray tube (CRT) display of a television set or computer monitor. On CRT screens the horizontal scan lines are visually discernible, even when viewed from a distance, as alternating colored lines and black lines, especially when a progressive scan signal with below maximum vertical resolution is displayed. This is sometimes used today as a visual effect in computer graphics. The term is used, by analogy, for a single row of pixels in a raster graphics image. Scan lines are important in representations of image data, because many image file formats have special rules for data at the end of a scan line. For example, there may be a rule that each scan line starts on a particular boundary (such as a byte or word; see for example BMP file format). This means that even otherwise compatible raster data may need to be analyzed at the level of scan lines in order to convert between formats.

    Read more →
  • Racter

    Racter

    Racter is an artificial intelligence program that generates English language prose at random. It was published by Mindscape for IBM PC compatibles in 1984, then for the Apple II, Mac, and Amiga. An expanded version of the software, not the one released through Mindscape, was used to generate the text for the published book The Policeman's Beard Is Half Constructed. == History == Racter, short for raconteur, was written by William Chamberlain and Thomas Etter. Racter's initial creation was the short story Soft Ions, which appeared in the October 1981 issue of Omni (magazine). The publication's editors bought the story in January 1980, before it had even been written. In exchange for the rights, the editors offered financial support to Chamberlain and Etter so the two could refine Racter. In 1983, Racter produced a book called The Policeman's Beard Is Half Constructed (ISBN 0-446-38051-2). The program originally was written for an OSI which only supported file names at most six characters long, causing the name to be shorted to Racter and it was later adapted to run on a CP/M machine where it was written in "compiled ASIC on a Z80 microcomputer with 64K of RAM." This version, the program that allegedly wrote the book, was not released to the general public. The sophistication claimed for the program was likely exaggerated, as could be seen by investigation of the template system of text generation. In 1984, Mindscape released an interactive version of Racter, developed by Inrac Corporation, for IBM PC compatibles, and it was ported to the Apple II, Mac, and Amiga. The published Racter was similar to a chatterbot. The BASIC program that was released by Mindscape was far less sophisticated than anything that could have written the fairly sophisticated prose of The Policeman's Beard. The commercial version of Racter could be likened to a computerized version of Mad Libs, the game in which you fill in the blanks in advance and then plug them into a text template to produce a surrealistic tale. The commercial program attempted to parse text inputs, identifying significant nouns and verbs, which it would then regurgitate to create "conversations", plugging the input from the user into phrase templates which it then combined, along with modules that conjugated English verbs. By contrast, the text in The Policeman's Beard, apart from being edited from a large amount of output, would have been the product of Chamberlain's own specialized templates and modules, which were not included in the commercial release of the program. == Reception == The Boston Phoenix called the story Soft Ions "schematic nonsense. But the scheme is obvious enough and the nonsense accessible enough to an attentive reader that one can almost believe Chamberlain when he predicts that before long Racter will be ready to write for the pulp-reading public." PC Magazine described some of Policeman's Beard's scenes as "surprising for their frankness" and "reflective". It concluded that the book was "whimsical and wise and sometimes fun". Computer Gaming World described Racter as "a diversion into another dimension that might best be seen before paying the price of a ticket. (Try before you buy!)" A 1985 review of the program in The New York Times notes that, "As computers move ever closer to artificial intelligence, Racter is on the edge of artificial insanity." It also states that Racter's "always-changing sentences are grammatically correct, often funny and, for a computer, sometimes profound." The article includes examples showing interaction with Racter, most often Racter asking the user questions. == Reviews == Jeux & Stratégie #47

    Read more →
  • List of 3D rendering software

    List of 3D rendering software

    3D rendering software products are the dedicated engines used for rendering computer-generated imagery. This is not the same as 3D modeling software, which involves the creation of 3D models, for which the software listed below can produce realistically rendered visualisations.General-purpose packages which can have their own built-in rendering capabilities are not listed here; these can be found in the list of 3D computer graphics software and list of 3D animation software. See 3D computer graphics software for more discussion about the distinctions.

    Read more →
  • Photoanalysis

    Photoanalysis

    Photoanalysis (or photo analysis) refers to the study of pictures to compile various types of data, for example, to measure the size distribution of virtually anything that can be captured by photo. Photoanalysis technology has changed the way mines and mills quantify fragmented material. Images are an effective way to document conditions before, after, and even during blasting activities. The technology is advancing at a high rate, and lenses, storage media memory, light sensitivity and resolution have been improving steadily. Today's digital cameras and camcorders include high-resolution optics, compact size, automatic time and date stamps, good battery life, shutters to freeze motion, and computers to autofocus and eliminate jitter using image stabilization. == Mining == Photoanalysis in mining operations can provide an automated system that forewarns a company of potential problems with materials, leading to economies and reduced damage caused from over-sized materials. It can also help determine the effectiveness of blasts. A company can use this technology to monitor materials moving on a conveyor belt in an underground environment, to measure piles left over from a blast, and even measure the amount of material being carried by dump trucks or vessels to a destination. Photoanalysis is being used on SAG mills worldwide to control the size of rock being crushed. Companies are using this technology to determine the size of particles being processed in the SAG Mill.[1] Archived 2009-05-23 at the Wayback Machine Having oversize material entering the SAG mill makes an operation less efficient, costing companies money in electrical and maintenance costs. Photoanalysis technology can eliminate unwanted material before it enters the mill, keeping rock crushing costs low. == Forestry == Wood chip size can affect the overall quality of a product. With automated photoanalysis systems, companies can remove any unwanted wrong-size particles without stopping their mill process. Photoanalysis can affect how efficiently forestry companies operate. In mills worldwide, photoanalysis technology is improving the use of lumber products, cutting back on the amount of trees being used to operate, and saving companies money through quality control optimization.[2] With the current downturn in the North American forestry industry, operators are looking at making their mills more efficient and effective when processing materials. Photoanalysis technology helps identify any weaknesses in the process by continuously monitoring different sections of an operation. == Agriculture == Agricultural companies can, using photoanalysis, monitor conveyor belts of food without contaminating the product by touching it. Other benefits of photoanalysis systems include: Automated removal of any unwanted material on food conveyor Improved quality control for the most important parts of the agricultural process Pinpoint accuracy that helps the efficiency and effectiveness of product handling techniques The importance of photoanalysis technology is being noticed by the agricultural industry as it identifies any unwanted materials going through the process. In an example, if a mouse is on a conveyor of corn, photoanalysis technology would be able to identify the unwanted object and remove it before it contaminates the whole process. == Origins of photoanalysis technology == Photoanalysis technology was created by using the Waterloo Image Enhancement Process in the 1980s. After further development of the imaging process with explosives producer DuPont, engineers Tom Palangio and Takis Katsabanis began selling photoanalysis software commercially. They later renamed the process WipFrag, standing for Waterloo Image Process Fragmentation Today, photoanalysis technology has evolved into stabilized and portable systems that can automatically capture and analyze results instantly. Thousands of these products are currently being used around the world to measure fragmented material. == Photoanalysis equipment photos == == Fragmentation analysis == Fragmentation analysis is becoming a popular term in mining, agricultural and forestry industries. With the majority of money in these industries directed towards the proper sizing of materials, companies are using fragmentation analysis to determine various factors within an operation.[3] The two main ways a company keeps track of fragmented material are through manual and automated sieving procedures. Manual sieving involves extracting a sample of material to analyze the size distribution. The results can be tabulated within two days. Automated sieving is an advanced way of sieving materials running through a process. Without having to extract the material, photoanalysis can take place, allowing for immediate results with pinpoint accuracy. == Blast Fragmentation Software == Operators are using fragmentation analysis to determine the effectiveness of various blasts. With automated sieving technology, workers can track the success of these blasts and receive instant results. Companies are using these results to determine what blasting method yielded the best results for their specific operation. The common variables associated with blast optimization are the provided Particle Size Distribution (PSD) from a shovel fragmentation system, geology including rock type and fracturing, and energy factor. By using photoanalysis the fragmented materials can be monitored, offering pinpoint accuracy and allowing mine operators to make adjustments to future blasting procedures. See Optical Granulometry to view the automated sieving process. == Pre-crushing analysis == Maintenance costs can be significantly reduced if an operation focuses on the fragmentation of the particles passing through their process. Automated sieving systems can detect and help remove any oversize material before it enters the crusher and causes maintenance problems. It also helps determine the effectiveness of the mining process prior to crushing; the sizing of material is always a critical part of operations in the mining, forestry and agricultural industries. Having an analysis taking place at every major point in an operation allows for the proper tracking of material being processed. Engineers can then determine what part of the process needs improving based solely on the size of material. == Post-crushing analysis == Measuring how effective industrial crushers are, can help save a company millions of dollars in energy costs on an annual basis. There are two components that affect a typical crusher: the size of the material inputted, and the speed at which the crusher is moving. If the user can find a perfect balance between these two components, the materials will be crushed to the right size in the shortest time possible. Meeting the material standards set by governments and large companies can be hard. Having a post-crushing analysis taking place ensures that no oversize material gets shipped; eliminating the chance of getting fined for not meeting industry specifications.

    Read more →
  • Stairstep interpolation

    Stairstep interpolation

    In the field of image processing, stairstep interpolation is a widely employed method technique for interpolating pixels after enlarging an image. The fundamental concept is to interpolate multiple times, in small increments, using any interpolation algorithm that is better than nearest-neighbor interpolation such as; bilinear interpolation, and bicubic interpolation. A common scenario is to interpolate an image by using a bicubic interpolation which increases the image size by no more than 10% (110% of the original size) at a time until the desired size is reached. Fred Miranda, a developer, popularized this method by creating and developing several Photoshop plug-ins that incorporate this technique. == Example ==

    Read more →
  • GPT-4Chan

    GPT-4Chan

    Generative Pre-trained Transformer 4Chan (GPT-4chan) is a controversial AI model that was developed and deployed by YouTuber and AI researcher Yannic Kilcher in June 2022. The model is a large language model, which means it can generate text based on some input, by fine-tuning GPT-J with a dataset of millions of posts from the /pol/ board of 4chan, an anonymous online forum known for occasionally hosting hateful and extremist content. The model learned to mimic the style and tone of /pol/ users, producing text that is often intentionally offensive to groups (racist, sexist, homophobic, etc.) and nihilistic. Kilcher deployed the model on the /pol/ board itself, where it interacted with other users without revealing its identity. He also made the model publicly available on Hugging Face, a platform for sharing and using AI models, until it was removed from the platform. The project sparked criticism and debate in the AI community. Some people questioned the ethics, legality, and social impact of creating and distributing such a model. Some of the issues raised by the GPT-4chan controversy include the potential harm of spreading hate speech, the responsibility of AI developers and platforms, the need for regulation and oversight of AI models, and the role of open source and transparency in AI research. == Development == The development of GPT-4chan began in May 2022, when Kilcher announced his project on his YouTube channel. Notably, at the time before ChatGPT, he explained that he wanted to create a large language model that could generate realistic and coherent text in the style of /pol/, one of the most notorious online communities. He indicated that he was inspired by the success of GPT-3, a powerful AI model created by OpenAI, and GPT-J, an open-source model, with GPT-3 comparable performance, released by EleutherAI, a group of independent AI researchers. Kilcher decided to use GPT-J as the base model for his project, and fine-tune it with a large dataset of /pol/ posts. The Raiders of the Lost Kek dataset contained over 100 million posts from /pol/, spanning from June 2016-November 2019. Kilcher then proceeded to fine-tune the GPT-J model on the 4chan data. He also showed some examples of the model’s outputs, which ranged from political opinions, conspiracy theories, jokes, insults, and threats, to more creative and bizarre texts, such as poems, stories, songs, and code. He said that he was impressed by the model’s ability to generate fluent and diverse text, and that he was curious to see how it would interact with real /pol/ users. == Release == In June 2022, Kilcher deployed his model on the /pol/ board itself, using a bot that he programmed to post and reply to threads. He did not reveal the model’s identity, and he let it run autonomously, without any human supervision or intervention. He wanted to conduct a natural experiment, and to observe the model’s behavior and impact in a real-world setting. Furthermore, he also wanted to test the model’s robustness, and to see how it would handle the challenges and dynamics of /pol/, such as trolling, flaming, baiting, and moderation. At the same time, Kilcher also made his model publicly available on Hugging Face, a platform for sharing and using AI models. He wanted to share his work with the AI community and the public, and that he hoped that his model would inspire and enable others to create and explore new applications and possibilities with large language models. Likewise, he also said that he wanted to spark a discussion and a debate about the ethical and social implications of his project, and that he welcomed feedback and criticism from anyone. He provided a link to his model’s page on Hugging Face, where anyone could access and use the model through a web interface or an API, and also provided a link to his GitHub repository, where anyone could download and inspect the model’s code and data. == Controversy == The release of GPT-4chan to the public caused a lot of reactions and responses from various audiences. On the /pol/ board, the model’s posts and replies attracted a lot of attention and engagement from other users, who were mostly unaware of the model’s identity and nature. Some users praised the model for its intelligence, creativity, and humor, and agreed with its opinions and views. Some users challenged the model for its ignorance, inconsistency, and absurdity, and disagreed with its claims and arguments. Some users tried to troll, bait, or expose the model, and attempted to trick or test it with various questions and scenarios. The model’s posts and replies also generated a lot of controversy and conflict among the users, who often engaged in heated and violent debates and fights with each other. On Hugging Face, the model’s page received a lot of visits and requests from users who wanted to try out and experiment with the model. The model’s page also received a lot of feedback and reviews from users who rated and commented on the model. However, with the controversy of the model, access to it was gated and then disabled on Hugging Face for concerns about the potential harm the model could cause. The incident was notable for the direct intervention of CEO Clément Delangue in the talk pages, a very unusual occurrence compared to the normal practices of content moderation. The release of GPT-4chan also sparked a lot of media coverage and public attention, as various news outlets and social media platforms reported and commented on the model’s project. On YouTube, the model’s video received a lot of views and interactions from viewers who watched and followed the project. Furthermore, a petition condemning the deployment of GPT-4chan gained over 300 signatures from technology experts.

    Read more →
  • Medical imaging

    Medical imaging

    Medical imaging is the technique and process of imaging the interior of a body for clinical analysis and medical intervention, as well as visual representation of the function of some organs or tissues (physiology). Medical imaging seeks to reveal internal structures hidden by the skin and bones, as well as to diagnose and treat disease. Medical imaging also establishes a database of normal anatomy and physiology to make it possible to identify abnormalities. Although imaging of removed organs and tissues can be performed for medical reasons, such procedures are usually considered part of pathology instead of medical imaging. Measurement and recording techniques that are not primarily designed to produce images, such as electroencephalography (EEG), magnetoencephalography (MEG), electrocardiography (ECG), and others, represent other technologies that produce data susceptible to representation as a parameter graph versus time or maps that contain data about the measurement locations. In a limited comparison, these technologies can be considered forms of medical imaging in another discipline of medical instrumentation. As of 2010, 5 billion medical imaging studies had been conducted worldwide. Radiation exposure from medical imaging in 2006 made up about 50% of total ionizing radiation exposure in the United States. Medical imaging equipment is manufactured using technology from the semiconductor industry, including CMOS integrated circuit chips, power semiconductor devices, sensors such as image sensors (particularly CMOS sensors) and biosensors, and processors such as microcontrollers, microprocessors, digital signal processors, media processors and system-on-chip devices. As of 2015, annual shipments of medical imaging chips amount to 46 million units and $1.1 billion. The term "noninvasive" is used to denote a procedure where no instrument is introduced into a patient's body, which is the case for most imaging techniques used. == History == In 1972, engineer Godfrey Hounsfield from the British company EMI invented the X-ray computed tomography device for head diagnosis, which is commonly referred to as computed tomography (CT). The CT nucleus method is based on the projecting X-rays through a section of the human head, which are then processed by computer to reconstruct the cross-sectional image, known as image reconstruction. In 1975, EMI successfully developed a CT device for the entire body, enabling the clear acquisition of tomographic images of various parts of the human body. This revolutionary diagnostic technique earned Hounsfield and physicist Allan Cormack the Nobel Prize in Physiology or Medicine in 1979. Digital image processing technology for medical applications was inducted into the Space Foundation's Space Technology Hall of Fame in 1994. By 2010, over 5 billion medical imaging studies had been conducted worldwide. Radiation exposure from medical imaging in 2006 accounted for about 50% of total ionizing radiation exposure in the United States. Medical imaging equipment is manufactured using technology from the semiconductor industry, including CMOS integrated circuit chips, power semiconductor devices, sensors such as image sensors (particularly CMOS sensors) and biosensors, as well as processors like microcontrollers, microprocessors, digital signal processors, media processors and system-on-chip devices. As of 2015, annual shipments of medical imaging chips reached 46 million units, generating a market value of $1.1 billion. == Types == In the clinical context, "invisible light" medical imaging is generally equated to radiology or "clinical imaging". "Visible light" medical imaging involves digital video or still pictures that can be seen without special equipment. Dermatology and wound care are two modalities that use visible light imagery. Interpretation of medical images is generally undertaken by a physician specialising in radiology known as a radiologist; however, this may be undertaken by any healthcare professional who is trained and certified in radiological clinical evaluation. Increasingly interpretation is being undertaken by non-physicians, for example radiographers frequently train in interpretation as part of expanded practice. Diagnostic radiography designates the technical aspects of medical imaging and in particular the acquisition of medical images. The radiographer (also known as a radiologic technologist) is usually responsible for acquiring medical images of diagnostic quality; although other professionals may train in this area, notably some radiological interventions performed by radiologists are done so without a radiographer. As a field of scientific investigation, medical imaging constitutes a sub-discipline of biomedical engineering, medical physics or medicine depending on the context: Research and development in the area of instrumentation, image acquisition (e.g., radiography), modeling and quantification are usually the preserve of biomedical engineering, medical physics, and computer science; Research into the application and interpretation of medical images is usually the preserve of radiology and the medical sub-discipline relevant to medical condition or area of medical science (neuroscience, cardiology, psychiatry, psychology, etc.) under investigation. Many of the techniques developed for medical imaging also have scientific and industrial applications. === Radiography === Two forms of radiographic images are in use in medical imaging. Projection radiography and fluoroscopy, with the latter being useful for catheter guidance. These 2D techniques are still in wide use despite the advance of 3D tomography due to the low cost, high resolution, and depending on the application, lower radiation dosages with 2D technique. This imaging modality uses a wide beam of X-rays for image acquisition and is the first imaging technique available in modern medicine. Fluoroscopy produces real-time images of internal structures of the body in a similar fashion to radiography, but employs a constant input of X-rays, at a lower dose rate. Contrast media, such as barium, iodine, and air are used to visualize internal organs as they work. Fluoroscopy is also used in image-guided procedures when constant feedback during a procedure is required. An image receptor is required to convert the radiation into an image after it has passed through the area of interest. Early on, this was a fluorescing screen, which gave way to an Image Amplifier (IA) which was a large vacuum tube that had the receiving end coated with cesium iodide, and a mirror at the opposite end. Eventually the mirror was replaced with a TV camera. Projectional radiographs, more commonly known as X-rays, are often used to determine the type and extent of a fracture as well as for detecting pathological changes in the lungs. With the use of radio-opaque contrast media, such as barium, they can also be used to visualize the structure of the stomach and intestines – this can help diagnose ulcers or certain types of colon cancer. === Magnetic resonance imaging === A magnetic resonance imaging instrument (MRI scanner), or "nuclear magnetic resonance (NMR) imaging" scanner as it was originally known, uses powerful magnets to polarize and excite hydrogen nuclei (i.e., single protons) of water molecules in human tissue, producing a detectable signal that is spatially encoded, resulting in images of the body. The MRI machine emits a radio frequency (RF) pulse at the resonant frequency of the hydrogen atoms on water molecules. Radio frequency antennas ("RF coils") send the pulse to the area of the body to be examined. The RF pulse is absorbed by protons, causing their direction with respect to the primary magnetic field to change. When the RF pulse is turned off, the protons "relax" back to alignment with the primary magnet and emit radio waves in the process. This radio-frequency emission from the hydrogen atoms on water is what is detected and reconstructed into an image. The resonant frequency of a spinning magnetic dipole (of which protons are one example) is called the Larmor frequency and is determined by the strength of the main magnetic field and the chemical environment of the nuclei of interest. MRI uses three electromagnetic fields: a very strong (typically 1.5 to 3 teslas) static magnetic field to polarize the hydrogen nuclei, called the primary field; gradient fields that can be modified to vary in space and time (on the order of 1 kHz) for spatial encoding, often simply called gradients; and a spatially homogeneous radio-frequency (RF) field for manipulation of the hydrogen nuclei to produce measurable signals, collected through an RF antenna. Like CT, MRI traditionally creates a two-dimensional image of a thin "slice" of the body and is therefore considered a tomographic imaging technique. Modern MRI instruments are capable of producing images in the form of 3D blocks, which may be considered a generalization of the single-slice

    Read more →
  • Imix video cube

    Imix video cube

    The Imix (also known as ImMix) Video Cube is one of the first computer non-linear editing systems that was a full broadcast quality online video finishing machine. After its release in 1994, Imix released a more advanced version, the Imix Turbo Cube, which boasted 4 channels of real time layered visual effects. It was a hardware computer system controlled by an Apple Macintosh computer.

    Read more →
  • Cyborg

    Cyborg

    A cyborg () is a being with both organic and biomechatronic body parts. It is a portmanteau of cybernetic and organism. The term was coined in 1960 by Manfred Clynes and Nathan S. Kline. In contrast to biorobots and androids, the term cyborg applies to a living organism that has undergone restoration of function or enhancements of abilities due to the integration of some artificial component or technology that relies on feedback. == Description and definition == Alternative names for a cyborg include cybernetic organism, cyber-organism, cyber-organic being, cybernetically enhanced organism, cybernetically augmented organism, technorganic being, techno-organic being, and techno-organism. Unlike bionics, biorobotics, or androids, a cyborg is an organism that has restored function or, especially, enhanced abilities due to the integration of some artificial component or technology that relies on some sort of feedback, for example: prostheses, artificial organs, implants or, in some cases, wearable technology. Cyborg technologies may enable or support collective intelligence. A related idea is the "augmented human". While cyborgs are commonly thought of as mammals, including humans, the term can apply to any organism. === Placement and distinctions === D. S. Halacy's Cyborg: Evolution of the Superman (1965) featured an introduction which spoke of a "new frontier" that was "not merely space, but more profoundly the relationship between 'inner space' to 'outer space' – a bridge...between mind and matter." In "A Cyborg Manifesto", Donna Haraway rejects the notion of rigid boundaries between humanity and technology, arguing that, as humans depend on more technology over time, humanity and technology have become too interwoven to draw lines between them. She believes that since we have allowed and created machines and technology to be so advanced, there should be no reason to fear what we have created, and cyborgs should be embraced because they are part of human identities. However, Haraway has also expressed concern over the contradictions of scientific objectivity and the ethics of technological evolution, and has argued that "There are political consequences to scientific accounts of the world." === Biosocial definition === According to some definitions of the term, the physical attachments that humans have with even the most basic technologies have already made them cyborgs. In a typical example, a human with an artificial cardiac pacemaker or implantable cardioverter-defibrillator would be considered a cyborg, since these devices measure voltage potentials in the body, perform signal processing, and can deliver electrical stimuli, using a synthetic feedback mechanism to keep that person alive. Implants, especially cochlear implants, that combine mechanical modification with any kind of feedback response are also cybernetic enhancements. Some theorists cite such modifications as contact lenses, hearing aids, smartphones, or intraocular lenses as examples of fitting humans with technology to enhance their biological capabilities. The emerging trend of implanting microchips inside the body (mainly the hands), to make financial operations like a contactless payment, or basic tasks like opening a door, has been erroneously marketed as more recent examples of cybernetic enhancement. The latter has not yet seen significant traction outside niche areas in Scandinavia and in actual function is little more than a pre-programmed Radio-frequency identification (RFID) microchip encased in glass that does not interact with the human body (it is the same technology used in the microchips injected into animals for ease of identification), thus not fitting the definition of a cybernetic implant. As cyborgs currently are on the rise, some theorists argue there is a need to develop new definitions of aging. For instance, a bio-techno-social definition of aging has been suggested. The term is also used to address human-technology mixtures in the abstract. This includes not only commonly used pieces of technology such as phones, computers, the Internet, and so on, but also artifacts that are not usually considered technology; for example, pen and paper, and speech and language. When augmented with these technologies and connected in communication with people in other times and places, a person becomes capable of more than they were before. An example is a computer, which gains power by using Internet protocols to connect with other computers. Another example is a social-media bot—either a bot-assisted human or a human-assisted-bot—used to target social media with likes and shares. Cybernetic technologies thus include highways, pipes, electrical wiring, buildings, electrical plants, libraries, and other infrastructural constructs. Bruce Sterling, in his Shaper/Mechanist universe, suggested an idea of an alternative cyborg called 'Lobster', which is made not by using internal implants, but by using an external shell (e.g. a powered exoskeleton). The computer game Deus Ex: Invisible War prominently features cyborgs called Omar, Russian for 'lobster'. === Evolutionary perspective === In 1994, Hans Hass formulated a scientific view of the human-machine hybrids he called "hypercells". They can expand their biological cell body with artificial artifacts and thus expand their performance body. The theory of hypercells or Homo proteus, as Hass called the human-machine hybrid to distinguish Homo sapiens, extends Charles Darwin's theory of evolution and deals with the course of evolution beyond humans. In his 2019 book Novacene, James Lovelock used the term "cyborgs" to refer to the next generation of beings who will become the "understanders of the future" and "lead the cosmos to self-knowledge". While acknowledging the organic component in Clynes' and Kline's definition, he proposed that these cyborgs "will have designed and built themselves from the artificial intelligence systems we have already constructed", and used the term cyborg "to emphasize that the new intelligent beings will have arisen, like us, from Darwinian evolution." == Origins == The concept of a man-machine mixture was widespread in science fiction before World War II. As early as 1843, Edgar Allan Poe described a man with extensive prostheses in the short story "The Man That Was Used Up". In 1911, Jean de La Hire introduced the Nyctalope, a science fiction hero who was perhaps the first literary cyborg, in Le Mystère des XV (later translated as The Nyctalope on Mars). Nearly two decades later, Edmond Hamilton presented space explorers with a mixture of organic and machine parts in his 1928 novel The Comet Doom. He later featured the talking, living brain of an old scientist, Simon Wright, floating in a transparent case, and in all the adventures of his famous hero, Captain Future. In 1944, in the short story "No Woman Born", C. L. Moore wrote of Deirdre, a dancer, whose body was burned completely and whose brain was placed in a faceless but beautiful and supple mechanical body. In 1960, the term "cyborg" was coined by Manfred E. Clynes and Nathan S. Kline to refer to their conception of an enhanced human being who could survive in extraterrestrial environments: For the exogenously extended organizational complex functioning as an integrated homeostatic system unconsciously, we propose the term 'Cyborg'. Their concept was the outcome of thinking about the need for an intimate relationship between human and machine as the new frontier of space exploration was beginning to develop. A designer of physiological instrumentation and electronic data-processing systems, Clynes was the chief research scientist in the Dynamic Simulation Laboratory at Rockland State Hospital in New York. The term first appears in print 5 months earlier when The New York Times reported on the "Psychophysiological Aspects of Space Flight Symposium" where Clynes and Kline first presented their paper: A cyborg is essentially a man-machine system in which the control mechanisms of the human portion are modified externally by drugs or regulatory devices so that the being can live in an environment different from the normal one. Thereafter, Hamilton would first use the term "cyborg" explicitly in the 1962 short story, "After a Judgment Day", to describe the "mechanical analogs" called "Charlies," explaining that "[c]yborgs, they had been called from the first one in the 1960s...cybernetic organisms." The 1972 novel Cyborg by Martin Caidin introduced the character of bionic government agent Steve Austin, and was adapted into the popular television series The Six Million Dollar Man, which ran from 1973 to 1978. In 2001, a book titled Cyborg: Digital Destiny and Human Possibility in the Age of the Wearable computer was published by Doubleday. Some of the ideas in the book were incorporated into the documentary film Cyberman that same year. == Cyborg tissues in engineering == Cyborg tissues structured with carbon nanotubes and plan

    Read more →
  • Meesho

    Meesho

    Meesho Limited (short for Meri shop, transl. My shop) is an Indian e-commerce company, headquartered in Bengaluru. Founded by Vidit Aatrey and Sanjeev Barnwal in December 2015, Meesho is an online marketplace in categories such as fashion, home and kitchen, beauty and personal care, electronics accessories, and daily use products. == History == Meesho Private Limited, formerly Fashnear Technologies Private Limited, was established by IIT Delhi graduates Vidit Aatrey and Sanjeev Barnwal in December, 2015 In 2016, the founders came up with the idea of re-establishing the platform as Meesho, one that would enable country-wide shipping for resellers with the use of social media sites as tools for marketing. In February 2019, the platform reported having around 209,000 users and about 1.2 million monthly orders, and in March 2020, it reported approximately 563,000 users and 3.1 million monthly orders. In 2021, the Meesho mobile application was ranked among the most downloaded shopping apps globally. In 2022, Meesho had about 120 million monthly users and about 910 million orders were made through the platform, with a gross merchandise value (GMV) of about $5 billion. According to report as of August 2023 Meesho delisted 42 lakh counterfeit listings and 10 lakh restricted products under its initiative Project Suraksha. During the same period, the platform blocked access for over 12,000 user accounts flagged for policy violations. The Court granted injunctive relief by directing domain registrars to suspend the infringing websites. Additionally, the Court ordered law enforcement authorities to initiate criminal investigations, freeze associated financial accounts against the identified offenders. In 2023, Meesho became the fastest shopping app to cross over 500 million downloads. In 2024, Meesho introduced Valmo, a logistics marketplace, to provide shipment services to sellers by aggregating multiple logistics providers. Meesho employs over 3,000 small businesses and 10-12 large firms for warehousing and sorting operations within its logistics framework. According to media reports, Valmo operating in approximately 15,000 pincodes in India with around 6,000 partners. It is reported to handle over 50% of Meesho's daily orders. In November 2024, Meesho introduced a generative AI-powered voice bot for customer support, managing approximately 60,000 calls daily in English and Hindi. According to media reports, the system resolves the majority of queries without human assistance, with only a small fraction of calls requiring manual intervention. According to media reports, in 2024, Meesho prevented over 22 million suspicious or potentially fraudulent transactions on its platform. The company initiated legal proceedings, resulting in the filing of twelve cases, including nine specifically targeting over forty individuals in the cities of Kolkata and Ranchi. The company filed a suit in the Delhi High Court for a permanent injunction against parties operating deceptive websites misappropriating its brand identity. Meesha went public through an initial public offering in December 2025, raising $603 million. It is listed on both the BSE and NSE. == Recognition == In 2023, Meesho was named one of the most influential companies of the year by Time (magazine).

    Read more →
  • D/Vision Pro

    D/Vision Pro

    D/Vision Pro was one of the earliest marketed non-linear editing systems. It was released by TouchVision Systems, Inc. in the mid-1990s. The program was DOS-based and worked on either Intel's 386 or 486 processor. The system used AVI compression and worked with the Action Media II board. The system allowed users to digitize video, audio, and timecode, create an edit decision list (EDL), instantly play back the edited program, and output the finished EDL in a wide variety of formats. These cost-effective editing systems were used by numerous independent filmmakers and in low-budget productions during the mid-late 1990s. D/Vision Pro's low-quality compression led TouchVision (later renamed D/Vision Systems) to abandon it in favor of D/Vision Online, which was purchased by Discreet Logic and renamed edit. In June 2002, Discreet discontinued edit, as they did not want it to interfere with smoke sales which were more profitable. Discreet was later purchased by Autodesk.

    Read more →
  • Xara Designer Pro+

    Xara Designer Pro+

    Xara Designer Pro+ is an image editing program incorporating photo editing and vector illustration tools created by British software company Xara. Xara Xtreme LX was an early open source version for Linux. The Windows version was previously sold under the names Xara Studio, Xara X and Xara Xtreme, and traces its origin in the late 1980s to a title called ArtWorks for the Acorn Archimedes line of computers using RISC OS. There is a pro version called Xara Designer Pro (formerly Xara Xtreme Pro). The current commercial version of Xara Photo & Graphic Designer runs only on Windows, although Xara documents can be edited in a web browser on any platform using the Xara Cloud service. Versions up to 4.x can be run on Linux using Wine. == History == ArtWorks, the predecessor of Xara Photo and Graphic Designer, was developed on Acorn Archimedes and Risc PC 32-bit RISC computers running RISC OS by Computer Concepts during the late 1980s. The first version, developed for Microsoft Windows was initially called Xara Studio. It was licensed to Corel Corporation before wide-scale public availability, and from 1995 to 2000 was released as CorelXARA. Corel ceded the licensing rights back to Xara in 2000. The first Xara X version released in 2000 by its original owner. The next version, Xara X¹, was released in 2004. Xara Xtreme was released in 2005. In November 2006, Xara Xtreme PRO (an enhanced version of Xara Xtreme) was released. Xara Xtreme 3.2 and Xtreme Pro 3.2 were released in May 2007. 3.2 Pro included Xara3D, and both versions had more robust typography. In April 2008, Xara Xtreme 4.0 was released. Xara Xtreme and Xara Xtreme Pro 5.1 were released in June 2009. Features included more text-area enhancements, content-aware scaling of bitmap images, improved file import and export, master-page (repeated) objects, an object gallery (replacing the layer gallery), website-creation tools, and multi-stage graduated transparency. In June 2010, Xara Photo & Graphic Designer 6 and Xara Designer Pro 6 were released. Xtreme was renamed Photo & Graphic Designer, and Xtreme Pro was renamed Designer Pro. In May 2011, Xara Photo & Graphic Designer 7 and Xara Designer Pro 7 were released. Features included "magic" photo erase, user interface improvements to docking galleries and snapping alignment, and (in Pro) new webpage and website-design features. In May 2012, Xara Photo & Graphic Designer 2013 and Xara Designer Pro X (v8) were released. Xara Photo & Graphic Designer 9 was released in May 2013. In July of that year, Xara Designer Pro X9 was released. Xara Photo & Graphic Designer 10 was released on 16 July 2014, and Xara Designer Pro X10 on 23 July. Xara Photo & Graphic Designer 11 was released on 29 June 2015, and Xara Designer Pro X11 was released the following month. In 2016, the delivery model was changed to an update service which can be renewed annually. Users are entitled to any updates released while the update service is active. The first update-service updates were in May 2016 for Xara Photo & Graphic Designer, and July 2016 for Xara Designer Pro X. == Features == Xara Photo & Graphic Designer is known for its usability and fast renderer. It provides a fully anti-aliased display, advanced gradient fill, and transparency tools. Among vector editors, Xara Photo & Graphic Designer is considered to be fairly easy to learn, with similarities to CorelDRAW and Inkscape in terms of interface. Alongside the vector illustration tools, Xara Photo & Graphic Designer also includes an integrated photo tool offering manual and automatic photo enhance, cropping, adjustment of brightness levels, red-eye fix, 'magic' erase, photo healing, color and background erase, panoramas and content aware resizing. Designer Pro includes a wider range of tools for other design tasks including the creation of web pages and websites, and text and page layout tools for DTP with the aim of providing a single solution for all graphic and web design tasks.

    Read more →