AI Detector Deepseek

AI Detector Deepseek — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Text Database and Dictionary of Classic Mayan

  The project Text Database and Dictionary of Classic Mayan (abbr. TWKM) promotes research on the writing and language of pre-Hispanic Maya culture. It is housed in the Faculty of Arts at the University of Bonn and was established with funding from the North Rhine-Westphalian Academy of Sciences, Humanities and the Arts. The project has a projected run-time of fifteen years and is directed by Nikolai Grube from the Department of Anthropology of the Americas at the University of Bonn. The goal of the project is to conduct computer-based studies of all extant Maya hieroglyphic texts from an epigraphic and cultural-historical standpoint, and to produce and publish a database and a comprehensive dictionary of the Classic Mayan language. == Subject of the Project == The text database, as well as the dictionary that will be compiled by the conclusion of the project, will be assembled based on all known texts from the pre-Hispanic Maya culture. These texts were produced and used between approximately the third century B.C. through A.D. 1500, in a region that today includes parts of the countries of Mexico, Guatemala, Belize, and Honduras. The thousands of hieroglyphic inscriptions on monuments, ceramics, or daily objects that have survived into the present offer insight into the language's vocabulary and structure. The project's database and dictionary will digitally represent original spellings using the logo-syllabic Maya hieroglyphs, as well as their transcription and transliteration in the Roman alphabet. The data will be additionally annotated with various epigraphic analyses, translations, and further object-specific information. == Project Partners == TWKM will employ digital technologies in order to compile and make available the data and metadata, as well as to publish the project's research results. The project thereby methodologically positions itself in the field of the digital humanities. The project will be conducted in cooperation with the project partners (below), the research association for the eHumanities TextGrid, as well as the University and Regional Library of Bonn (ULB). The working environment that is currently under construction, in which the data and metadata will be compiled and annotated, will be realized in theTextGrid Laboratory, a software of the virtual research environment. A further component of this software, the TextGrid Repository, will make the data that are authorized for publication freely available online and ensure their long-term storage. The tools for data compilation and annotation attained from the modularly constructed and extended TextGrid lab thereby provide all the necessary materials for facilitating the research team's the typical epigraphic workflow. The workflow usually begins by documenting the texts and the objects on which they are preserved, and by compiling descriptive data. It then continues with the various levels of epigraphic and linguistic analysis, and concludes in the best case scenario with a translation of the analyzed inscription and a corresponding publication. In cooperation with the ULB, selected data will additionally be made available. The project's Virtual Inscription Archive will present online, in the Digital Collections of the ULB, hieroglyphic inscriptions selected from the published data in the repository, including an image of and brief information about the texts and the objects on which they are written, epigraphic analysis, and translation. == Project Goal == One of the project's goals is to produce a dictionary of Classic Mayan, in both digital and print form, towards the end of the project run-time. Additionally, a database with a corpus of inscriptions, including their translations and epigraphic analyses, will be made freely available online. The database furthermore will provide an ontology-like link of the contextual object data with the inscriptions and with each other, thereby allowing a cultural-historical arrangement of all contents within the periods of pre-Hispanic Maya culture. The contents of the database are additionally linked to citations of relevant literature. As a result, the database will also make freely available to both the scientific community and other interested parties a bibliography representing the research history and a base of knowledge concerning ancient Maya culture and script. In addition, the Classic Maya script, in its temporally defined stages of language development, will be gathered into and documented in a comprehensive language corpus with the aid of the information gathered by the project. In collaboration with all project participants, the corpus data can be used, together with the aid of various comparable analyses and also computational linguistic methods, such as inference-based methods, to confirm readings of some hieroglyphs that are currently only partially confirmed, and to eventually completely decipher the Classic Maya script.

  Read more →
• 

  Bottom-up and top-down approaches

  Bottom-up and top-down are strategies of composition and decomposition in fields as diverse as information processing and ordering knowledge, software, humanistic and scientific theories (see systemics), time management, and organization. In practice they can be seen as a style of thinking, teaching, or leadership. A top-down approach (also known as stepwise design and stepwise refinement and in some cases used as a synonym of decomposition) is essentially the breaking down of a system to gain insight into its compositional subsystems in a reverse engineering fashion. In a top-down approach an overview of the system is formulated, specifying, but not detailing, any first-level subsystems. Each subsystem is then refined in yet greater detail, sometimes in many additional subsystem levels, until the entire specification is reduced to base elements. A top-down model is often specified with the assistance of black boxes, which makes it easier to manipulate. However, black boxes may fail to clarify elementary mechanisms or be detailed enough to realistically validate the model. A top-down approach starts with the big picture, then breaks down into smaller segments. A bottom-up approach is the piecing together of systems to give rise to more complex systems, thus making the original systems subsystems of the emergent system. Bottom-up processing is a type of information processing based on incoming data from the environment to form a perception. From a cognitive psychology perspective, information enters the eyes in one direction (sensory input, or the "bottom"), and is then turned into an image by the brain that can be interpreted and recognized as a perception (output that is "built up" from processing to final cognition). In a bottom-up approach the individual base elements of the system are first specified in great detail. These elements are then linked together to form larger subsystems, which then in turn are linked, sometimes in many levels, until a complete top-level system is formed. This strategy often resembles a "seed" model, by which the beginnings are small but eventually grow in complexity and completeness. But "organic strategies" may result in a tangle of elements and subsystems, developed in isolation and subject to local optimization as opposed to meeting a global purpose. == Computer science == === Software development === In the software development process, the top-down and bottom-up approaches play a key role. Top-down approaches emphasize planning and a complete understanding of the system. It is inherent that no coding can begin until a sufficient level of detail has been reached in the design of at least some part of the system. Top-down approaches are implemented by attaching the stubs in place of the module. But these delay testing of the ultimate functional units of a system until significant design is complete. Bottom-up emphasizes coding and early testing, which can begin as soon as the first module has been specified. But this approach runs the risk that modules may be coded without having a clear idea of how they link to other parts of the system, and that such linking may not be as easy as first thought. Re-usability of code is one of the main benefits of a bottom-up approach. Top-down design was promoted in the 1970s by IBM researchers Harlan Mills and Niklaus Wirth. Mills developed structured programming concepts for practical use and tested them in a 1969 project to automate the New York Times morgue index. The engineering and management success of this project led to the spread of the top-down approach through IBM and the rest of the computer industry. Among other achievements, Niklaus Wirth, the developer of Pascal programming language, wrote the influential paper Program Development by Stepwise Refinement. Since Niklaus Wirth went on to develop languages such as Modula and Oberon (where one could define a module before knowing about the entire program specification), one can infer that top-down programming was not strictly what he promoted. Top-down methods were favored in software engineering until the late 1980s, and object-oriented programming assisted in demonstrating the idea that both aspects of top-down and bottom-up programming could be used. Modern software design approaches usually combine top-down and bottom-up approaches. Although an understanding of the complete system is usually considered necessary for good design—leading theoretically to a top-down approach—most software projects attempt to make use of existing code to some degree. Pre-existing modules give designs a bottom-up flavor. === Programming === Top-down is a programming style, the mainstay of traditional procedural languages, in which design begins by specifying complex pieces and then dividing them into successively smaller pieces. The technique for writing a program using top-down methods is to write a main procedure that names all the major functions it will need. Later, the programming team looks at the requirements of each of those functions and the process is repeated. These compartmentalized subroutines eventually will perform actions so simple they can be easily and concisely coded. When all the various subroutines have been coded the program is ready for testing. By defining how the application comes together at a high level, lower-level work can be self-contained. In a bottom-up approach the individual base elements of the system are first specified in great detail. These elements are then linked together to form larger subsystems, which in turn are linked, sometimes at many levels, until a complete top-level system is formed. This strategy often resembles a "seed" model, by which the beginnings are small, but eventually grow in complexity and completeness. Object-oriented programming (OOP) is a paradigm that uses "objects" to design applications and computer programs. In mechanical engineering with software programs such as Pro/ENGINEER, Solidworks, and Autodesk Inventor users can design products as pieces not part of the whole and later add those pieces together to form assemblies like building with Lego. Engineers call this "piece part design". === Parsing === Parsing is the process of analyzing an input sequence (such as that read from a file or a keyboard) in order to determine its grammatical structure. This method is used in the analysis of both natural languages and computer languages, as in a compiler. Bottom-up parsing is parsing strategy that recognizes the text's lowest-level small details first, before its mid-level structures, and leaves the highest-level overall structure to last. In top-down parsing, on the other hand, one first looks at the highest level of the parse tree and works down the parse tree by using the rewriting rules of a formal grammar. == Natural sciences == === Nanotechnology === Top-down and bottom-up are two approaches for the manufacture of products. These terms were first applied to the field of nanotechnology by the Foresight Institute in 1989 to distinguish between molecular manufacturing (to mass-produce large atomically precise objects) and conventional manufacturing (which can mass-produce large objects that are not atomically precise). Bottom-up approaches seek to have smaller (usually molecular) components built up into more complex assemblies, while top-down approaches seek to create nanoscale devices by using larger, externally controlled ones to direct their assembly. Certain valuable nanostructures, such as Silicon nanowires, can be fabricated using either approach, with processing methods selected on the basis of targeted applications. A top-down approach often uses the traditional workshop or microfabrication methods where externally controlled tools are used to cut, mill, and shape materials into the desired shape and order. Micropatterning techniques, such as photolithography and inkjet printing belong to this category. Vapor treatment can be regarded as a new top-down secondary approaches to engineer nanostructures. Bottom-up approaches, in contrast, use the chemical properties of single molecules to cause single-molecule components to (a) self-organize or self-assemble into some useful conformation, or (b) rely on positional assembly. These approaches use the concepts of molecular self-assembly and/or molecular recognition. See also Supramolecular chemistry. Such bottom-up approaches should, broadly speaking, be able to produce devices in parallel and much cheaper than top-down methods but could potentially be overwhelmed as the size and complexity of the desired assembly increases. === Neuroscience and psychology === These terms are also employed in cognitive sciences including neuroscience, cognitive neuroscience and cognitive psychology to discuss the flow of information in processing. Typically, sensory input is considered bottom-up, and higher cognitive processes, which have more information from other sources, are considered top-down. A bottom-up proc

  Read more →
• 

  Emotion-sensitive software

  Emotion-sensitive software (ESS) is software specifically designed to target and monitor emotional response in a human being. Some software measures anger by comparing the pitch of a voice to a regular, or calm, pitch. Another approach is the measurement of physical appearance. If a camera or similar recording device picks up a certain amount of red pigmentation in the skin the system can be alerted that this person is angered. The competitive landscape in the Electronic Surveillance Software (ESS) industry is marked by a high level of secrecy regarding the operational details of these software systems. Many producers deliberately withhold information about the inner workings of their ESS products, a strategy that serves dual purposes: firstly, it intensifies competition among companies in the sector, as each strives to maintain a unique edge without revealing trade secrets that could be leveraged by competitors; secondly, this secrecy acts as a deterrent against individuals or entities who might try to circumvent the surveillance mechanisms. One application of ESS was developed by University of Notre Dame Assistant Professor of Psychology Sidney D'Mello, Art Graesser from the University of Memphis and a colleague from Massachusetts Institute of Technology. They used the technology to create an electronic tutor that could assess a student's level of boredom and frustration based on facial expression and body language, and react accordingly.

  Read more →
• 

  Artificial intelligence in government

  Artificial intelligence (AI) has a range of uses in government. It can be used to further public policy objectives (in areas such as emergency services, health and welfare), as well as assist the public to interact with the government (through the use of virtual assistants, for example). According to the Harvard Business Review, "Applications of artificial intelligence to the public sector are broad and growing, with early experiments taking place around the world." Hila Mehr from the Ash Center for Democratic Governance and Innovation at Harvard University notes that AI in government is not new, with postal services using machine methods in the late 1990s to recognise handwriting on envelopes to automatically route letters. The use of AI in government comes with significant benefits, including efficiencies resulting in cost savings (for instance by reducing the number of front office staff) and reducing the opportunities for corruption. However, it also carries risks (described below). == Uses of AI in government == The potential uses of AI in government are wide and varied, with Deloitte considering that "Cognitive technologies could eventually revolutionize every facet of government operations". Mehr suggests that six types of government problems are appropriate for AI applications: Resource allocation—such as where administrative support is required to complete tasks more quickly. Large datasets—where these are too large for employees to work efficiently and multiple datasets could be combined to provide greater insights. Expert shortage—including where basic questions could be answered and niche issues can be learned. Predictable scenario—historical data makes the situation predictable. Procedural tasks refer to repetitive tasks in which the answers to inputs or outputs are binary. Diverse data—where data takes various forms (such as visual and linguistic) and needs to be summarized regularly. Mehr states that "While applications of AI in government work have not kept pace with the rapid expansion of AI in the private sector, the potential use cases in the public sector mirror common applications in the private sector." Potential and actual uses of AI in government can be divided into three broad categories: those that contribute to public policy objectives, those that assist public interactions with the government, and other uses. === Contributing to public policy objectives === There are a range of examples of where AI can contribute to public policy objectives. These include: Receiving benefits at job loss, retirement, bereavement and child birth almost immediately, in an automated way (thus without requiring any actions from citizens at all) Social insurance service provision Classifying emergency calls based on their urgency (like the system used by the Cincinnati Fire Department in the United States) Detecting and preventing the spread of diseases Assisting public servants in making welfare payments and immigration decisions Adjudicating bail hearings Triaging health care cases Monitoring social media for public feedback on policies Monitoring social media to identify emergency situations Identifying fraudulent benefits claims Predicting a crime and recommending optimal police presence Predicting traffic congestion and car accidents Anticipating road maintenance requirements Identifying breaches of health regulations Providing personalised education to students Marking exam papers Assisting with defence and national security (see Artificial intelligence § Military and Applications of artificial intelligence § Other fields in which AI methods are implemented respectively) Artificial Intelligence in China has been used to drive both political and economic markets. In 2019, Shanghai’s government rolled out 100 billion yuan to assist in funding enterprises that used AI to introduce 22 new policy agendas. Shanghai invested in these enterprises to attract top international talent in order to set up the Shanghai Municipal Big Data Center. City Brain AI is an urban management platform made by Alibaba. China uses City Brain AI to maintain a significant share of capital investment through public and state owned enterprises. The synergy between public and private sectors are more than capital-driven with City Brain AI. The blend of both public and private shareholding is only made out to be through the role of provincial and sub-provincial governments. Both hold control over the direction that City Brain AI makes both socially and economically. === Assisting public interactions with government === AI can be used to assist members of the public to interact with government and access government services, for example by: Answering questions using virtual assistants or chatbots (see below) Directing requests to the appropriate area within government Filling out forms Assisting with searching documents (e.g. IP Australia's trade mark search) Scheduling appointments Various governments, including those of Australia and Estonia, have implemented virtual assistants to aid citizens in navigating services, with applications ranging from tax inquiries to life-event registrations. === Gerrymandering === Gerrymandering is a method of influencing political process by drawing map boundaries in favor of incumbent parties. Academic researchers Wendy Tam Cho and Bruce Cain have proposed partially automating the map-drawing process with an AI system to reduce partisan gerrymandering. Even with this AI system, the process may still be manipulated to favor partisan interests, so the researchers emphasized the importance of transparency and human involvement. === Other uses === Other uses of AI in government include: Translation Language interpretation pioneered by the European Commission's Directorate General for Interpretation and Florika Fink-Hooijer. Drafting documents == Potential benefits == AI offers potential efficiencies and cost savings for the government. For example, Deloitte has estimated that automation could save US Government employees between 96.7 million to 1.2 billion hours a year, resulting in potential savings of between $3.3 billion to $41.1 billion a year. The Harvard Business Review has stated that while this may lead a government to reduce employee numbers, "Governments could instead choose to invest in the quality of its services. They can re-employ workers' time towards more rewarding work that requires lateral thinking, empathy, and creativity—all things at which humans continue to outperform even the most sophisticated AI program." == Risks == Risks associated with the use of AI in government include AI becoming susceptible to bias, a lack of transparency in how an AI application may make decisions, and the accountability for any such decisions. For example, a 2026 lawsuit alleged that the U.S. Department of Government Efficiency used ChatGPT to flag and cancel federal humanities grants, including projects on Jewish history and Israeli culture, over some objections from NEH officials, illustrating how automated decision-making could affect funding outcomes.

  Read more →
• 

  Semantic space

  Semantic spaces in the natural language domain aim to create representations of natural language that are capable of capturing meaning. The original motivation for semantic spaces stems from two core challenges of natural language: Vocabulary mismatch (the fact that the same meaning can be expressed in many ways) and ambiguity of natural language (the fact that the same term can have several meanings). The application of semantic spaces in natural language processing (NLP) aims at overcoming limitations of rule-based or model-based approaches operating on the keyword level. The main drawback with these approaches is their brittleness, and the large manual effort required to create either rule-based NLP systems or training corpora for model learning. Rule-based and machine learning based models are fixed on the keyword level and break down if the vocabulary differs from that defined in the rules or from the training material used for the statistical models. Research in semantic spaces dates back more than 20 years. In 1996, two papers were published that raised a lot of attention around the general idea of creating semantic spaces: latent semantic analysis and Hyperspace Analogue to Language. However, their adoption was limited by the large computational effort required to construct and use those semantic spaces. A breakthrough with regard to the accuracy of modelling associative relations between words (e.g. "spider-web", "lighter-cigarette", as opposed to synonymous relations such as "whale-dolphin", "astronaut-driver") was achieved by explicit semantic analysis (ESA) in 2007. ESA was a novel (non-machine learning) based approach that represented words in the form of vectors with 100,000 dimensions (where each dimension represents an Article in Wikipedia). However practical applications of the approach are limited due to the large number of required dimensions in the vectors. More recently, advances in neural network techniques in combination with other new approaches (tensors) led to a host of new recent developments: Word2vec from Google, GloVe from Stanford University, and fastText from Facebook AI Research (FAIR) labs.

  Read more →
• 

  Run-to-completion scheduling

  Run-to-completion scheduling or nonpreemptive scheduling is a scheduling model in which each task runs until it either finishes, or explicitly yields control back to the scheduler. Run-to-completion systems typically have an event queue which is serviced either in strict order of admission by an event loop, or by an admission scheduler which is capable of scheduling events out of order, based on other constraints such as deadlines. Some preemptive multitasking scheduling systems behave as run-to-completion schedulers in regard to scheduling tasks at one particular process priority level, at the same time as those processes still preempt other lower priority tasks and are themselves preempted by higher priority tasks.

  Read more →
• 

  Irish logarithm

  The Irish logarithm was a system of number manipulation invented by Percy Ludgate for machine multiplication. The system used a combination of mechanical cams as lookup tables and mechanical addition to sum pseudo-logarithmic indices to produce partial products, which were then added to produce results. The technique is similar to Zech logarithms (also known as Jacobi logarithms), but uses a system of indices original to Ludgate. == Concept == Ludgate's algorithm compresses the multiplication of two single decimal numbers into two table lookups (to convert the digits into indices), the addition of the two indices to create a new index which is input to a second lookup table that generates the output product. Because both lookup tables are one-dimensional, and the addition of linear movements is simple to implement mechanically, this allows a less complex mechanism than would be needed to implement a two-dimensional 10×10 multiplication lookup table. Ludgate stated that he deliberately chose the values in his tables to be as small as he could make them; given this, Ludgate's tables can be simply constructed from first principles, either via pen-and-paper methods, or a systematic search using only a few tens of lines of program code. They do not correspond to either Zech logarithms, Remak indexes or Korn indexes. == Pseudocode == The following is an implementation of Ludgate's Irish logarithm algorithm in the Python programming language: Table 1 is taken from Ludgate's original paper; given the first table, the contents of Table 2 can be trivially derived from Table 1 and the definition of the algorithm. Note since that the last third of the second table is entirely zeros, this could be exploited to further simplify a mechanical implementation of the algorithm.

  Read more →
• 

  Knowledge organization

  Knowledge organization (KO), organization of knowledge, organization of information, or information organization is an intellectual discipline concerned with activities such as document description, indexing, and classification that serve to provide systems of representation and order for knowledge and information objects. According to The Organization of Information by Joudrey and Taylor, information organization: examines the activities carried out and tools used by people who work in places that accumulate information resources (e.g., books, maps, documents, datasets, images) for the use of humankind, both immediately and for posterity. It discusses the processes that are in place to make resources findable, whether someone is searching for a single known item or is browsing through hundreds of resources just hoping to discover something useful. Information organization supports a myriad of information-seeking scenarios. Issues related to knowledge sharing can be said to have been an important part of knowledge management for a long time. Knowledge sharing has received a lot of attention in research and business practice both within and outside organizations and its different levels. Sharing knowledge is not only about giving it to others, but it also includes searching, locating, and absorbing knowledge. Unawareness of the employees' work and duties tends to provoke the repetition of mistakes, the waste of resources, and duplication of the same projects. Motivating co-workers to share their knowledge is called knowledge enabling. It leads to trust among individuals and encourages a more open and proactive relationship that grants the exchange of information easily. Knowledge sharing is part of the three-phase knowledge management process which is a continuous process model. The three parts are knowledge creation, knowledge implementation, and knowledge sharing. The process is continuous, which is why the parts cannot be fully separated. Knowledge creation is the consequence of individuals' minds, interactions, and activities. Developing new ideas and arrangements alludes to the process of knowledge creation. Using the knowledge which is present at the company in the most effective manner stands for the implementation of knowledge. Knowledge sharing, the most essential part of the process for our topic, takes place when two or more people benefit by learning from each other. Traditional human-based approaches performed by librarians, archivists, and subject specialists are increasingly challenged by computational (big data) algorithmic techniques. KO as a field of study is concerned with the nature and quality of such knowledge-organizing processes (KOP) (such as taxonomy and ontology) as well as the resulting knowledge organizing systems (KOS). == Theoretical approaches == === Traditional approaches === Among the major figures in the history of KO are Melvil Dewey (1851–1931) and Henry Bliss (1870–1955). Dewey's goal was an efficient way to manage library collections; not an optimal system to support users of libraries. His system was meant to be used in many libraries as a standardized way to manage collections. The first version of this system was created in 1876. An important characteristic in Henry Bliss' (and many contemporary thinkers of KO) was that the sciences tend to reflect the order of Nature and that library classification should reflect the order of knowledge as uncovered by science: The implication is that librarians, in order to classify books, should know about scientific developments. This should also be reflected in their education: Again from the standpoint of the higher education of librarians, the teaching of systems of classification ... would be perhaps better conducted by including courses in the systematic encyclopedia and methodology of all the sciences, that is to say, outlines which try to summarize the most recent results in the relation to one another in which they are now studied together. ... (Ernest Cushing Richardson, quoted from Bliss, 1935, p. 2) Among the other principles, which may be attributed to the traditional approach to KO are: Principle of controlled vocabulary Cutter's rule about specificity Hulme's principle of literary warrant (1911) Principle of organizing from the general to the specific Today, after more than 100 years of research and development in LIS, the "traditional" approach still has a strong position in KO and in many ways its principles still dominate. === Facet analytic approaches === The date of the foundation of this approach may be chosen as the publication of S. R. Ranganathan's colon classification in 1933. The approach has been further developed by, in particular, the British Classification Research Group. The best way to explain this approach is probably to explain its analytico-synthetic methodology. The meaning of the term "analysis" is: breaking down each subject into its basic concepts. The meaning of the term synthesis is: combining the relevant units and concepts to describe the subject matter of the information package in hand. Given subjects (as they appear in, for example, book titles) are first analyzed into a few common categories, which are termed "facets". Ranganathan proposed his PMEST formula: Personality, Matter, Energy, Space and Time: Personality is the distinguishing characteristic of a subject. Matter is the physical material of which a subject may be composed. Energy is any action that occurs with respect to the subject. Space is the geographic component of the location of a subject. Time is the period associated with a subject. === The information retrieval tradition (IR) === Important in the IR-tradition have been, among others, the Cranfield experiments, which were founded in the 1950s, and the TREC experiments (Text Retrieval Conferences) starting in 1992. It was the Cranfield experiments, which introduced the measures "recall" and "precision" as evaluation criteria for systems efficiency. The Cranfield experiments found that classification systems like UDC and facet-analytic systems were less efficient compared to free-text searches or low level indexing systems ("UNITERM"). The Cranfield I test found, according to Ellis (1996, 3–6) the following results: Although these results have been criticized and questioned, the IR-tradition became much more influential while library classification research lost influence. The dominant trend has been to regard only statistical averages. What has largely been neglected is to ask: Are there certain kinds of questions in relation to which other kinds of representation, for example, controlled vocabularies, may improve recall and precision? === User-oriented and cognitive views === The best way to define this approach is probably by method: Systems based upon user-oriented approaches must specify how the design of a system is made on the basis of empirical studies of users. User studies demonstrated very early that users prefer verbal search systems as opposed to systems based on classification notations. This is one example of a principle derived from empirical studies of users. Adherents of classification notations may, of course, still have an argument: That notations are well-defined and that users may miss important information by not considering them. Folksonomies is a recent kind of KO based on users' rather than on librarians' or subject specialists' indexing. === Bibliometric approaches === These approaches are primarily based on using bibliographical references to organize networks of papers, mainly by bibliographic coupling (introduced by Kessler 1963) or co-citation analysis ( independently suggested by Marshakova 1973 and Small 1973). In recent years it has become a popular activity to construe bibliometric maps as structures of research fields. Two considerations are important in considering bibliometric approaches to KO: The level of indexing depth is partly determined by the number of terms assigned to each document. In citation indexing this corresponds to the number of references in a given paper. On the average, scientific papers contain 10–15 references, which provide quite a high level of depth. The references, which function as access points, are provided by the highest subject-expertise: The experts writing in the leading journals. This expertise is much higher than that which library catalogs or bibliographical databases typically are able to draw on. === The domain analytic approach === Domain analysis is a sociological-epistemological standpoint that advocates that the indexing of a given document should reflect the needs of a given group of users or a given ideal purpose. In other words, any description or representation of a given document is more or less suited to the fulfillment of certain tasks. A description is never objective or neutral, and the goal is not to standardize descriptions or make one description once and for all for different target groups. The develo

  Read more →
• 

  Crackme

  A crackme is a small computer program designed to test a programmer's reverse engineering skills. Crackmes are made as a legal way to crack software, since no intellectual property is being infringed. == Description == Crackmes often incorporate protection schemes and algorithms similar to those used in proprietary software. However, they can sometimes be more challenging because they may use advanced packing or protection techniques, making the underlying algorithm harder to analyze and modify. == Keygenme == A keygenme is specifically designed for the reverser to not only identify the protection algorithm used in the application but also create a small key generator (keygen) in the programming language of their choice. Most keygenmes, when properly manipulated, can be made self-keygenning. For example, during validation, they might generate the correct key internally and compare it to the user's input. This allows the key generation algorithm to be easily replicated. Anti-debugging and anti-disassembly routines are often used to confuse debuggers or render disassembly output useless. Code obfuscation is also used to further complicate reverse engineering.

  Read more →
• 

  Gutmann method

  The Gutmann method is an algorithm for securely erasing the contents of computer hard disk drives, such as files. Devised by Peter Gutmann and Colin Plumb and presented in the paper Secure Deletion of Data from Magnetic and Solid-State Memory in July 1996, it involved writing a series of 35 patterns over the region to be erased. The selection of patterns assumes that the user does not know the encoding mechanism used by the drive, so it includes patterns designed specifically for three types of drives. A user who knows which type of encoding the drive uses can choose only those patterns intended for their drive. A drive with a different encoding mechanism would need different patterns. Most of the patterns in the Gutmann method were designed for older MFM/RLL-encoded disks. Gutmann himself has noted that more modern drives no longer use these older encoding techniques, making parts of the method irrelevant. He said "In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques". Since about 2001, some ATA IDE and SATA hard drive manufacturer designs include support for the ATA Secure Erase standard, obviating the need to apply the Gutmann method when erasing an entire drive. The Gutmann method does not apply to USB sticks: a 2011 study reports that 71.7% of data remained available. On solid state drives it resulted in 0.8–4.3% recovery. == Background == The delete function in most operating systems simply marks the space occupied by the file as reusable (removes the pointer to the file) without immediately removing any of its contents. At this point the file can be fairly easily recovered by numerous recovery applications. However, once the space is overwritten with other data, there is no known way to use software to recover it. It cannot be done with software alone since the storage device only returns its current contents via its normal interface. Gutmann claims that intelligence agencies have sophisticated tools, including magnetic force microscopes, which together with image analysis, can detect the previous values of bits on the affected area of the media (for example hard disk). This claim however seems to be invalid based on the thesis "Data Reconstruction from a Hard Disk Drive using Magnetic Force Microscopy". == Method == An overwrite session consists of a lead-in of four random write patterns, followed by patterns 5 to 31 (see rows of table below), executed in a random order, and a lead-out of four more random patterns. Each of patterns 5 to 31 was designed with a specific magnetic media encoding scheme in mind, which each pattern targets. The drive is written to for all the passes even though the table below only shows the bit patterns for the passes that are specifically targeted at each encoding scheme. The result should obscure any data on the drive so that only the most advanced physical scanning (e.g., using a magnetic force microscope) of the drive is likely to be able to recover any data. The series of patterns is as follows: Encoded bits shown in bold are what should be present in the ideal pattern, although due to the encoding the complementary bit is actually present at the start of the track. == Criticism == Daniel Feenberg of the National Bureau of Economic Research, an American private nonprofit research organization, criticized Gutmann's claim that intelligence agencies are likely to be able to read overwritten data, citing a lack of evidence for such claims. He finds that Gutmann cites one non-existent source and sources that do not actually demonstrate recovery, only partially-successful observations. The definition of "random" is also quite different from the usual one used: Gutmann expects the use of pseudorandom data with sequences known to the recovering side, not an unpredictable one such as a cryptographically secure pseudorandom number generator. Nevertheless, some published government security procedures consider an overwritten disk to still be sensitive. Human factors and potential limitations in the overwriting software create a residual risk that is not considered acceptable at the highest security levels. Gutmann himself has responded to some of these criticisms and also criticized how his algorithm has been abused in an epilogue to his original paper, in which he states: In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques. As a result, they advocate applying the voodoo to PRML and EPRML drives even though it will have no more effect than a simple scrubbing with random data. In fact performing the full 35-pass overwrite is pointless for any drive since it targets a blend of scenarios involving all types of (normally-used) encoding technology, which covers everything back to 30+-year-old MFM methods (if you don't understand that statement, re-read the paper). If you're using a drive which uses encoding technology X, you only need to perform the passes specific to X, and you never need to perform all 35 passes. For any modern PRML/EPRML drive, a few passes of random scrubbing is the best you can do. As the paper says, "A good scrubbing with random data will do about as well as can be expected". This was true in 1996, and is still true now. Gutmann's statement has been criticized for not recognizing that PRML/EPRML does not replace RLL, with critics claiming PRML/EPRML to be a signal detection method rather than a data encoding method. Polish data recovery service Kaleron has also claimed that Gutmann's publication contains further factual errors and assumptions that do not apply to actual disks.

  Read more →
• 

  How to Solve it by Computer

  How to Solve it by Computer is a computer science book by R. G. Dromey, first published by Prentice-Hall in 1982. It is occasionally used as a textbook, especially in India. It is an introduction to the whys of algorithms and data structures. Features of the book: The design factors associated with problems, The creative process behind coming up with innovative solutions for algorithms and data structures, The line of reasoning behind the constraints, factors and the design choices made. The very fundamental algorithms portrayed by this book are mostly presented in pseudocode and/or Pascal notation.

  Read more →
• 

  Novell File Reporter

  Novell File Reporter (NFR) is software that allows network administrators to identify files stored on the network and generates reports regarding the size of individual files, file type, when files were last accessed, and where duplicates exist. Additionally, the File Reporter tracks storage volume capacity and usage. It is a component of the Novell File Management Suite. == How it works == Novell File Reporter examines and reports on terabytes of data via a central reporting engine (NFR Engine) and distributed agents (NFR Agents). The NFR Engine schedules the scans of file instances conducted by NFR Agents, processes and compiles the scans for reporting purposes, and provides report information to the user interface. In addition to the standard reports it can generate, the NFR Engine can also produce "trigger reports" in response to specific events (a server volume crossing a capacity threshold, for example). Accordingly, the NFR Engine monitors the data gathered by the NFR Agents in order to identify these "triggers." The NFR Engine when working in either eDirectory or Active Directory connects to the directory via a Directory Services Interface (DSI) and thus can monitor and check file permissions.

  Read more →
• 

  Core FTP

  Core FTP LE is a freeware secure FTP client for Windows, developed by CoreFTP.com. Features include FTP, SSL/TLS, SFTP via SSH, and HTTP/HTTPS support. Secure FTP clients encrypt account information and data transferred across the internet, protecting data from being seen, or sniffed across networks. Core FTP is a traditional FTP client with local files displayed on the left, remote files on the right. Core FTP Server is a secure FTP server for Windows, developed by CoreFTP.com, starting in 2010. == Licensing == CoreFTP LE is free for personal, educational, non-profit, and business use.

  Read more →
• 

  Communication-avoiding algorithm

  Communication-avoiding algorithms minimize movement of data within a memory hierarchy for improving its running-time and energy consumption. These minimize the total of two costs (in terms of time and energy): arithmetic and communication. Communication, in this context refers to moving data, either between levels of memory or between multiple processors over a network. It is much more expensive than arithmetic. == Formal theory == === Two-level memory model === A common computational model in analyzing communication-avoiding algorithms is the two-level memory model: There is one processor and two levels of memory. Level 1 memory is infinitely large. Level 0 memory ("cache") has size M {\displaystyle M} . In the beginning, input resides in level 1. In the end, the output resides in level 1. Processor can only operate on data in cache. The goal is to minimize data transfers between the two levels of memory. === Matrix multiplication === Corollary 6.2: More general results for other numerical linear algebra operations can be found in. The following proof is from. == Motivation == Consider the following running-time model: Measure of computation = Time per FLOP = γ Measure of communication = No. of words of data moved = β ⇒ Total running time = γ·(no. of FLOPs) + β·(no. of words) From the fact that β >> γ as measured in time and energy, communication cost dominates computation cost. Technological trends indicate that the relative cost of communication is increasing on a variety of platforms, from cloud computing to supercomputers to mobile devices. The report also predicts that gap between DRAM access time and FLOPs will increase 100× over coming decade to balance power usage between processors and DRAM. Energy consumption increases by orders of magnitude as we go higher in the memory hierarchy. United States president Barack Obama cited communication-avoiding algorithms in the FY 2012 Department of Energy budget request to Congress: New Algorithm Improves Performance and Accuracy on Extreme-Scale Computing Systems. On modern computer architectures, communication between processors takes longer than the performance of a floating-point arithmetic operation by a given processor. ASCR researchers have developed a new method, derived from commonly used linear algebra methods, to minimize communications between processors and the memory hierarchy, by reformulating the communication patterns specified within the algorithm. This method has been implemented in the TRILINOS framework, a highly-regarded suite of software, which provides functionality for researchers around the world to solve large scale, complex multi-physics problems. == Objectives == Communication-avoiding algorithms are designed with the following objectives: Reorganize algorithms to reduce communication across all memory hierarchies. Attain the lower-bound on communication when possible. The following simple example demonstrates how these are achieved. === Matrix multiplication example === Let A, B and C be square matrices of order n × n. The following naive algorithm implements C = C + A B: for i = 1 to n for j = 1 to n for k = 1 to n C(i,j) = C(i,j) + A(i,k) B(k,j) Arithmetic cost (time-complexity): n2(2n − 1) for sufficiently large n or O(n3). Rewriting this algorithm with communication cost labelled at each step for i = 1 to n {read row i of A into fast memory} - n2 reads for j = 1 to n {read C(i,j) into fast memory} - n2 reads {read column j of B into fast memory} - n3 reads for k = 1 to n C(i,j) = C(i,j) + A(i,k) B(k,j) {write C(i,j) back to slow memory} - n2 writes Fast memory may be defined as the local processor memory (CPU cache) of size M and slow memory may be defined as the DRAM. Communication cost (reads/writes): n3 + 3n2 or O(n3) Since total running time = γ·O(n3) + β·O(n3) and β >> γ the communication cost is dominant. The blocked (tiled) matrix multiplication algorithm reduces this dominant term: ==== Blocked (tiled) matrix multiplication ==== Consider A, B and C to be n/b-by-n/b matrices of b-by-b sub-blocks where b is called the block size; assume three b-by-b blocks fit in fast memory. for i = 1 to n/b for j = 1 to n/b {read block C(i,j) into fast memory} - b2 × (n/b)2 = n2 reads for k = 1 to n/b {read block A(i,k) into fast memory} - b2 × (n/b)3 = n3/b reads {read block B(k,j) into fast memory} - b2 × (n/b)3 = n3/b reads C(i,j) = C(i,j) + A(i,k) B(k,j) - {do a matrix multiply on blocks} {write block C(i,j) back to slow memory} - b2 × (n/b)2 = n2 writes Communication cost: 2n3/b + 2n2 reads/writes << 2n3 arithmetic cost Making b as large possible: 3b2 ≤ M we achieve the following communication lower bound: 31/2n3/M1/2 + 2n2 or Ω (no. of FLOPs / M1/2) == Previous approaches for reducing communication == Most of the approaches investigated in the past to address this problem rely on scheduling or tuning techniques that aim at overlapping communication with computation. However, this approach can lead to an improvement of at most a factor of two. Ghosting is a different technique for reducing communication, in which a processor stores and computes redundantly data from neighboring processors for future computations. Cache-oblivious algorithms represent a different approach introduced in 1999 for fast Fourier transforms, and then extended to graph algorithms, dynamic programming, etc. They were also applied to several operations in linear algebra as dense LU and QR factorizations. The design of architecture specific algorithms is another approach that can be used for reducing the communication in parallel algorithms, and there are many examples in the literature of algorithms that are adapted to a given communication topology.

  Read more →
• 

  Divide-and-conquer algorithm

  In computer science, divide and conquer is an algorithm design paradigm. A divide-and-conquer algorithm recursively breaks down a problem into two or more sub-problems of the same or related type, until these become simple enough to be solved directly. The solutions to the sub-problems are then combined to give a solution to the original problem. The divide-and-conquer technique is the basis of efficient algorithms for many problems, such as sorting (e.g., quicksort, merge sort), multiplying large numbers (e.g., the Karatsuba algorithm), finding the closest pair of points, syntactic analysis (e.g., top-down parsers), SAT solving, and computing the discrete Fourier transform (FFT). Designing efficient divide-and-conquer algorithms can be difficult. As in mathematical induction, it is often necessary to generalize the problem to make it amenable to a recursive solution. The correctness of a divide-and-conquer algorithm is usually proved by mathematical induction, and its computational cost is often determined by solving recurrence relations. == Divide and conquer == The divide-and-conquer paradigm is often used to find an optimal solution of a problem. Its basic idea is to decompose a given problem into two or more similar, but simpler, subproblems, to solve them in turn, and to compose their solutions to solve the given problem. Problems of sufficient simplicity are solved directly. For example, to sort a given list of n natural numbers, split it into two lists of about n/2 numbers each, sort each of them in turn, and interleave both results appropriately to obtain the sorted version of the given list (see the picture). This approach is known as the merge sort algorithm. The name "divide and conquer" is sometimes applied to algorithms that reduce each problem to only one sub-problem, such as the binary search algorithm for finding a record in a sorted list (or its analogue in numerical computing, the bisection algorithm for root finding). These algorithms can be implemented more efficiently than general divide-and-conquer algorithms; in particular, if they use tail recursion, they can be converted into simple loops. Under this broad definition, however, every algorithm that uses recursion or loops could be regarded as a "divide-and-conquer algorithm". Therefore, some authors consider that the name "divide and conquer" should be used only when each problem may generate two or more subproblems. The name decrease and conquer has been proposed instead for the single-subproblem class. An important application of divide and conquer is in optimization, where if the search space is reduced ("pruned") by a constant factor at each step, the overall algorithm has the same asymptotic complexity as the pruning step, with the constant depending on the pruning factor (by summing the geometric series); this is known as prune and search. == Early historical examples == Early examples of these algorithms are primarily decrease and conquer – the original problem is successively broken down into single subproblems, and indeed can be solved iteratively. Binary search, a decrease-and-conquer algorithm where the subproblems are of roughly half the original size, has a long history. While a clear description of the algorithm on computers appeared in 1946 in an article by John Mauchly, the idea of using a sorted list of items to facilitate searching dates back at least as far as Babylonia in 200 BC. Another ancient decrease-and-conquer algorithm is the Euclidean algorithm to compute the greatest common divisor of two numbers by reducing the numbers to smaller and smaller equivalent subproblems, which dates to several centuries BC. An early example of a divide-and-conquer algorithm with multiple subproblems is Gauss's 1805 description of what is now called the Cooley–Tukey fast Fourier transform (FFT) algorithm, although he did not analyze its operation count quantitatively, and FFTs did not become widespread until they were rediscovered over a century later. An early two-subproblem D&C algorithm that was specifically developed for computers and properly analyzed is the merge sort algorithm, invented by John von Neumann in 1945. Another notable example is the algorithm invented by Anatolii A. Karatsuba in 1960 that could multiply two n-digit numbers in O ( n log 2 ⁡ 3 ) {\displaystyle O(n^{\log _{2}3})} operations (in Big O notation). This algorithm disproved Andrey Kolmogorov's 1956 conjecture that Ω ( n 2 ) {\displaystyle \Omega (n^{2})} operations would be required for that task. As another example of a divide-and-conquer algorithm that did not originally involve computers, Donald Knuth gives the method a post office typically uses to route mail: letters are sorted into separate bags for different geographical areas, each of these bags is itself sorted into batches for smaller sub-regions, and so on until they are delivered. This is related to a radix sort, described for punch-card sorting machines as early as 1929. == Advantages == === Solving difficult problems === Divide and conquer is a powerful tool for solving conceptually difficult problems: all it requires is a way of breaking the problem into sub-problems, of solving the trivial cases, and of combining sub-problems to the original problem. Similarly, decrease and conquer only requires reducing the problem to a single smaller problem, such as the classic Tower of Hanoi puzzle, which reduces moving a tower of height n {\displaystyle n} to move a tower of height n − 1 {\displaystyle n-1} . === Algorithm efficiency === The divide-and-conquer paradigm often helps in the discovery of efficient algorithms. It was the key, for example, to Karatsuba's fast multiplication method, the quicksort and mergesort algorithms, the Strassen algorithm for matrix multiplication, and fast Fourier transforms. In all these examples, the D&C approach led to an improvement in the asymptotic cost of the solution. For example, if (a) the base cases have constant-bounded size, the work of splitting the problem and combining the partial solutions is proportional to the problem's size n {\displaystyle n} , and (b) there is a bounded number p {\displaystyle p} of sub-problems of size ~ n p {\displaystyle {\frac {n}{p}}} at each stage, then the cost of the divide-and-conquer algorithm will be O ( n log p ⁡ n ) {\displaystyle O(n\log _{p}n)} . For other types of divide-and-conquer approaches, running times can also be generalized. For example, when a) the work of splitting the problem and combining the partial solutions take c n {\displaystyle cn} time, where n {\displaystyle n} is the input size and c {\displaystyle c} is some constant; b) when n < 2 {\displaystyle n<2} , the algorithm takes time upper-bounded by c {\displaystyle c} , and c) there are q {\displaystyle q} subproblems where each subproblem has size ~ n 2 {\displaystyle {\frac {n}{2}}} . Then, the running times are as follows: if the number of subproblems q > 2 {\displaystyle q>2} , then the divide-and-conquer algorithm's running time is bounded by O ( n log 2 ⁡ q ) {\displaystyle O(n^{\log _{2}q})} . if the number of subproblems is exactly one, then the divide-and-conquer algorithm's running time is bounded by O ( n ) {\displaystyle O(n)} . If, instead, the work of splitting the problem and combining the partial solutions take c n 2 {\displaystyle cn^{2}} time, and there are 2 subproblems where each has size n 2 {\displaystyle {\frac {n}{2}}} , then the running time of the divide-and-conquer algorithm is bounded by O ( n 2 ) {\displaystyle O(n^{2})} . === Parallelism === Divide-and-conquer algorithms are naturally adapted for execution in multi-processor machines, especially shared-memory systems where the communication of data between processors does not need to be planned in advance because distinct sub-problems can be executed on different processors. === Memory access === Divide-and-conquer algorithms naturally tend to make efficient use of memory caches. The reason is that once a sub-problem is small enough, it and all its sub-problems can, in principle, be solved within the cache, without accessing the slower main memory. An algorithm designed to exploit the cache in this way is called cache-oblivious, because it does not contain the cache size as an explicit parameter. Moreover, D&C algorithms can be designed for important algorithms (e.g., sorting, FFTs, and matrix multiplication) to be optimal cache-oblivious algorithms–they use the cache in a probably optimal way, in an asymptotic sense, regardless of the cache size. In contrast, the traditional approach to exploiting the cache is blocking, as in loop nest optimization, where the problem is explicitly divided into chunks of the appropriate size—this can also use the cache optimally, but only when the algorithm is tuned for the specific cache sizes of a particular machine. The same advantage exists with regards to other hierarchical storage systems, such as NUMA or virtual memory, as well as for multip

  Read more →