AI Detector Check

AI Detector Check — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Human–robot interaction

Human–robot interaction (HRI) is the study of interactions between humans and robots. Human–robot interaction is a multidisciplinary field with contributions from human–computer interaction, artificial intelligence, robotics, natural language processing, design, psychology and philosophy. A subfield known as physical human–robot interaction (pHRI) has tended to focus on device design to enable people to safely interact with robotic systems. == Origins == Human–robot interaction has been a topic of both science fiction and academic speculation even before any robots existed. Because much of active HRI development depends on natural language processing, many aspects of HRI are continuations of human communications, a field of research which is much older than robotics. The origin of HRI as a discrete problem was stated by 20th-century author Isaac Asimov in 1941, in his novel I, Robot. Asimov coined Three Laws of Robotics, namely: A robot may not injure a human being or, through inaction, allow a human being to come to harm. A robot must obey the orders given it by human beings except where such orders would conflict with the First Law. A robot must protect its own existence as long as such protection does not conflict with the First or Second Laws. These three laws provide an overview of the goals engineers and researchers hold for safety in the HRI field, although the fields of robot ethics and machine ethics are more complex than these three principles. However, generally human–robot interaction prioritizes the safety of humans that interact with potentially dangerous robotics equipment. Solutions to this problem range from the philosophical approach of treating robots as ethical agents (individuals with moral agency), to the practical approach of creating safety zones. These safety zones use technologies such as lidar to detect human presence or physical barriers to protect humans by preventing any contact between machine and operator. Although initially robots in the human–robot interaction field required some human intervention to function, research has expanded this to the extent that fully autonomous systems are now far more common than in the early 2000s. Autonomous systems include from simultaneous localization and mapping systems which provide intelligent robot movement to natural-language processing and natural-language generation systems which allow for natural, human-esque interaction which meet well-defined psychological benchmarks. Anthropomorphic robots (machines which imitate human body structure) are better described by the biomimetics field, but overlap with HRI in many research applications. Examples of robots which demonstrate this trend include Willow Garage's PR2 robot, the NASA Robonaut, and Honda ASIMO. However, robots in the human–robot interaction field are not limited to human-like robots: Paro and Kismet are both robots designed to elicit emotional response from humans, and so fall into the category of human–robot interaction. Goals in HRI range from industrial manufacturing through Cobots, medical technology through rehabilitation, autism intervention, and elder care devices, entertainment, human augmentation, and human convenience. Future research therefore covers a wide range of fields, much of which focuses on assistive robotics, robot-assisted search-and-rescue, and space exploration. == The goal of friendly human–robot interactions == Robots are artificial agents with capacities of perception and action in the physical world often referred by researchers as workspace. Their use has been generalized in factories but nowadays they tend to be found in the most technologically advanced societies in such critical domains as search and rescue, military battle, mine and bomb detection, scientific exploration, law enforcement, entertainment and hospital care. These new domains of applications imply a closer interaction with the user, sharing the workspace but also goals in terms of task achievement. The subfield of physical human–robot interaction (pHRI) has largely focused on device design to enable people to safely interact with robotic systems but is increasingly developing algorithmic approaches in an attempt to support fluent and expressive interactions between humans and robotic systems. With the advance in AI, the research is focusing on one part towards the safest physical interaction but also on a socially correct interaction, dependent on cultural criteria. The goal is to build an intuitive, and easy communication with the robot through speech, gestures, and facial expressions. Kerstin Dautenhahn refers to friendly Human–robot interaction as "Robotiquette" defining it as the "social rules for robot behaviour (a 'robotiquette') that is comfortable and acceptable to humans" The robot has to adapt itself to our way of expressing desires and orders and not the contrary. But every day environments such as homes have much more complex social rules than those implied by factories or even military environments. Thus, the robot needs perceiving and understanding capacities to build dynamic models of its surroundings. It needs to categorize objects, recognize and locate humans and further recognize their emotions. The need for dynamic capacities pushes forward every sub-field of robotics. Furthermore, by understanding and perceiving social cues, robots can enable collaborative scenarios with humans. For example, with the rapid rise of personal fabrication machines such as desktop 3D printers, laser cutters, etc., entering our homes, scenarios may arise where robots can collaboratively share control, co-ordinate and achieve tasks together. Industrial robots have already been integrated into industrial assembly lines and are collaboratively working with humans. The social impact of such robots have been studied and has indicated that workers still treat robots and social entities, rely on social cues to understand and work together. On the other end of HRI research the cognitive modelling of the "relationship" between human and the robots benefits the psychologists and robotic researchers the user study are often of interests on both sides. This research endeavours part of human society. For effective human – humanoid robot interaction numerous communication skills and related features should be implemented in the design of such artificial agents/systems. == General HRI research == HRI research spans a wide range of fields, some general to the nature of HRI. === Methods for perceiving humans === Methods for perceiving humans in the environment are based on sensor information. Research on sensing components and software led by Microsoft provide useful results for extracting the human kinematics (see Kinect). An example of older technique is to use colour information for example the fact that for light skinned people the hands are lighter than the clothes worn. In any case a human modelled a priori can then be fitted to the sensor data. The robot builds or has (depending on the level of autonomy the robot has) a 3D mapping of its surroundings to which is assigned the humans locations. Most methods intend to build a 3D model through vision of the environment. The proprioception sensors permit the robot to have information over its own state. This information is relative to a reference. Theories of proxemics may be used to perceive and plan around a person's personal space. A speech recognition system is used to interpret human desires or commands. By combining the information inferred by proprioception, sensor and speech the human position and state (standing, seated). In this matter, natural-language processing is concerned with the interactions between computers and human (natural) languages, in particular how to program computers to process and analyze large amounts of natural-language data. For instance, neural-network architectures and learning algorithms that can be applied to various natural-language processing tasks including part-of-speech tagging, chunking, named-entity recognition, and semantic role labeling. === Methods for motion planning === Motion planning in dynamic environments is a challenge that can at the moment only be achieved for robots with 3 to 10 degrees of freedom. Humanoid robots or even 2 armed robots, which can have up to 40 degrees of freedom, are unsuited for dynamic environments with today's technology. However lower-dimensional robots can use the potential field method to compute trajectories which avoid collisions with humans. === Cognitive models and theory of mind === Humans exhibit negative social and emotional responses as well as decreased trust toward some robots that closely, but imperfectly, resemble humans; this phenomenon has been termed the "Uncanny Valley". However recent research in telepresence robots has established that mimicking human body postures and expressive gestures has made the robots likeable and engaging in a remote setting. Further, the presence o
Read more →
Realization (linguistics)

In linguistics, realization is the process by which some kind of surface representation is derived from its underlying representation; that is, the way in which some abstract object of linguistic analysis comes to be produced in actual language. Phonemes are often said to be realized by speech sounds. The different sounds that can realize a particular phoneme are called its allophones. Realization is also a subtask of natural language generation, which involves creating an actual text in a human language (English, French, etc.) from a syntactic representation. There are a number of software packages available for realization, most of which have been developed by academic research groups in NLG. The remainder of this article concerns realization of this kind. == Example == For example, the following Java code causes the simplenlg system [2] to print out the text The women do not smoke.: In this example, the computer program has specified the linguistic constituents of the sentence (verb, subject), and also linguistic features (plural subject, negated), and from this information the realiser has constructed the actual sentence. == Processing == Realisation involves three kinds of processing: Syntactic realisation: Using grammatical knowledge to choose inflections, add function words and also to decide the order of components. For example, in English the subject usually precedes the verb, and the negated form of smoke is do not smoke. Morphological realisation: Computing inflected forms, for example the plural form of woman is women (not womans). Orthographic realisation: Dealing with casing, punctuation, and formatting. For example, capitalising The because it is the first word of the sentence. The above examples are very basic, most realisers are capable of considerably more complex processing. == Systems == A number of realisers have been developed over the past 20 years. These systems differ in terms of complexity and sophistication of their processing, robustness in dealing with unusual cases, and whether they are accessed programmatically via an API or whether they take a textual representation of a syntactic structure as their input. There are also major differences in pragmatic factors such as documentation, support, licensing terms, speed and memory usage, etc. It is not possible to describe all realisers here, but a few of the emerging areas are: Simplenlg [3]: a document realizing engine with an api which intended to be simple to learn and use, focused on limiting scope to only finding the surface area of a document. KPML [4]: this is the oldest realiser, which has been under development under different guises since the 1980s. It comes with grammars for ten different languages. FUF/SURGE [5]: a realiser which was widely used in the 1990s, and is still used in some projects today OpenCCG [6]: an open-source realiser which has a number of nice features, such as the ability to use statistical language models to make realisation decisions.
Read more →
SPL notation

SPL (Sentence Plan Language) is an abstract notation representing the semantics of a sentence in natural language. In a classical Natural Language Generation (NLG) workflow, an initial text plan (hierarchically or sequentially organized factoids, often modelled in accordance with Rhetorical Structure Theory) is transformed by a sentence planner (generator) component to a sequence of sentence plans modelled in a Sentence Plan Language. A surface generator can be used to transform the SPL notation into natural language sentences. Probably the most widely used SPL language used today (2022) is AMR (Abstract Meaning Representation, see there for further references), but is owes parts of its popularity to its application to NLP problems other than NLG, e.g., machine translation and semantic parsing.
Read more →
Text-to-video model

A text-to-video model is a form of generative artificial intelligence that uses a natural language description as input to produce a video relevant to the input text. Advancements during the 2020s in the generation of high-quality, text-conditioned videos have largely been driven by the development of video diffusion models. == Models == There are different models, including open source models. Chinese-language input CogVideo is the earliest text-to-video model "of 9.4 billion parameters" to be developed, with its demo version of open source codes first presented on GitHub in 2022. That year, Meta Platforms released a partial text-to-video model called "Make-A-Video", and Google's Brain (later Google DeepMind) introduced Imagen Video, a text-to-video model with 3D U-Net. === 2023 === In February 2023, Runway released Gen-1 and Gen-2, among the first commercially available text-to-video and video-to-video models accessible to the public through a web interface. Gen-1, initially released as a video-to-video model, allowed users to transform existing video footage using text or image prompts. Gen-2, introduced in March 2023 and made publicly available in June 2023, added text-to-video capabilities, enabling users to generate videos from text prompts alone. In March 2023, a research paper titled "VideoFusion: Decomposed Diffusion Models for High-Quality Video Generation" was published, presenting a novel approach to video generation. The VideoFusion model decomposes the diffusion process into two components: base noise and residual noise, which are shared across frames to ensure temporal coherence. By utilizing a pre-trained image diffusion model as a base generator, the model efficiently generated high-quality and coherent videos. Fine-tuning the pre-trained model on video data addressed the domain gap between image and video data, enhancing the model's ability to produce realistic and consistent video sequences. In the same month, Adobe introduced Firefly AI as part of its features. === 2024 === In January 2024, Google announced development of a text-to-video model named Lumiere which is anticipated to integrate advanced video editing capabilities. Matthias Niessner and Lourdes Agapito at AI company Synthesia work on developing 3D neural rendering techniques that can synthesise realistic video by using 2D and 3D neural representations of shape, appearances, and motion for controllable video synthesis of avatars. In June 2024, Luma Labs launched its Dream Machine video tool. That same month, Kuaishou extended its Kling AI text-to-video model to international users. In July 2024, TikTok owner ByteDance released Jimeng AI in China, through its subsidiary, Faceu Technology. By September 2024, the Chinese AI company MiniMax debuted its video-01 model, joining other established AI model companies like Zhipu AI, Baichuan, and Moonshot AI, which contribute to China's involvement in AI technology. In December 2024 Lightricks launched LTX Video as an open source model. === 2025 === Alternative approaches to text-to-video models include Google's Phenaki, Hour One, Colossyan, Runway's Gen-3 Alpha, and OpenAI's Sora, Several additional text-to-video models, such as Plug-and-Play, Text2LIVE, and TuneAVideo, have emerged. FLUX.1 developer Black Forest Labs has announced its text-to-video model SOTA. Google was preparing to launch a video generation tool named Veo for YouTube Shorts in 2025. In May 2025, Google launched the Veo 3 iteration of the model. It was noted for its impressive audio generation capabilities, which were a previous limitation for text-to-video models. In July 2025 Lightricks released an update to LTX Video capable of generating clips reaching 60 seconds, and in October 2025 it released LTX-2, with audio capabilities built in. === 2026 === In February 2026, ByteDance released Seedance 2.0, it was noted for its impressive realistic generation, motion and camera control and 15 second generation, however the model faced huge critiscism from Motion Picture Association for copyright infringement. After viewing a viral clip of a fight between actors Brad Pitt and Tom Cruise, Rhett Reese, who is the co-writer of Deadpool & Wolverine and Zombieland announced that on social media "I hate to say it. It’s likely over for us," further stating that "In next to no time, one person is going to be able to sit at a computer and create a movie indistinguishable from what Hollywood now releases." == Architecture and training == There are several architectures that have been used to create text-to-video models. Similar to text-to-image models, these models can be trained using Recurrent Neural Networks (RNNs) such as long short-term memory (LSTM) networks, which has been used for Pixel Transformation Models and Stochastic Video Generation Models, which aid in consistency and realism respectively. An alternative for these include transformer models. Generative adversarial networks (GANs), Variational autoencoders (VAEs), — which can aid in the prediction of human motion — and diffusion models have also been used to develop the image generation aspects of the model. Text-video datasets used to train models include, but are not limited to, WebVid-10M, HDVILA-100M, CCV, ActivityNet, and Panda-70M. These datasets contain millions of original videos of interest, generated videos, captioned-videos, and textual information that help train models for accuracy. Text-video datasets used to train models include, but are not limited to PromptSource, DiffusionDB, and VidProM. These datasets provide the range of text inputs needed to teach models how to interpret a variety of textual prompts. The video generation process involves synchronizing the text inputs with video frames, ensuring alignment and consistency throughout the sequence. This predictive process is subject to decline in quality as the length of the video increases due to resource limitations. The Will Smith Eating Spaghetti test is a benchmark for models. == Limitations == Despite the rapid evolution of text-to-video models in their performance, a primary limitation is that they are very computationally heavy which limits its capacity to provide high quality and lengthy outputs. Additionally, these models require a large amount of specific training data to be able to generate high quality and coherent outputs, which brings about the issue of accessibility. Moreover, models may misinterpret textual prompts, resulting in video outputs that deviate from the intended meaning. This can occur due to limitations in capturing semantic context embedded in text, which affects the model's ability to align generated video with the user's intended message. Various models, including Make-A-Video, Imagen Video, Phenaki, CogVideo, GODIVA, and NUWA, are currently being tested and refined to enhance their alignment capabilities and overall performance in text-to-video generation. Another issue with the outputs is that text or fine details in AI-generated videos often appear garbled, a problem that stable diffusion models also struggle with. Examples include distorted hands and unreadable text. == Ethics == The deployment of text-to-video models raises ethical considerations related to content generation. These models have the potential to create inappropriate or unauthorized content, including explicit material, graphic violence, misinformation, and likenesses of real individuals without consent. Ensuring that AI-generated content complies with established standards for safe and ethical usage is essential, as content generated by these models may not always be easily identified as harmful or misleading. The ability of AI to recognize and filter out NSFW or copyrighted content remains an ongoing challenge, with implications for both creators and audiences. == Impacts and applications == Text-to-video models offer a broad range of applications that may benefit various fields, from educational and promotional to creative industries. These models can streamline content creation for training videos, movie previews, gaming assets, and visualizations, making it easier to generate content. During the Russo-Ukrainian war, fake videos made with artificial intelligence were created as part of a propaganda war against Ukraine and shared in social media. These included depictions of children in the Ukrainian Armed Forces, fake ads targeting children encouraging them to denounce critics of the Ukrainian government, or fictitious statements by Ukrainian President Volodymyr Zelenskyy about the country's surrender, among others. === Movies === Kaur vs Kore is the first Indian feature film made using generative AI which features dual role for the AI character of Sunny Leone, set to release in 2026. Chiranjeevi Hanuman – The Eternal is an Indian movie made entirely using Generative AI created by Vijay Subramaniam which is set for theatrical release in 2026. The movie was widely criticised by the Film makers in the Bollywood industr
Read more →
Minimum resolvable contrast

Minimum resolvable contrast (MRC) is a subjective measure of a visible spectrum sensor’s or camera's sensitivity and ability to resolve data. A snapshot image of a series of three bar targets of selected spatial frequencies and various contrast coatings captured by the unit under test (UUT) is used to determine the MRC of the UUT, i.e., the visible spectrum camera or sensor. A trained observer selects the smallest target resolvable at each contrast level. Typically, specialized computer software collects the inputted data of the observer and provides a graph of contrast vs. spatial frequency at a given luminance level. A first order polynomial is fitted to the data and an MRC curve of spatial frequency versus contrast is generated.
Read more →
Jaggaer

JAGGAER, formerly SciQuest, is a provider of cloud-based business automation technology for Business Spend Management. Its headquarters is in Durham, North Carolina. == Company history == SciQuest was established in 1995 as a B2B eCommerce exchange.The company went public with an IPO in 1999. In 2001, SciQuest transitioned from a B2B exchange company into eProcurement software and supplier enablement platforms. SciQuest was taken private in 2004 and continued to move into eProcurement, inventory management and accounts payable automation. SciQuest completed an IPO in September 2010, raising approximately $57 million. SciQuest, and its 510 person workforce, was taken private in June 2016 as part of a $509 million acquisition by Accel-KKR, a private equity firm headquartered in Menlo Park, CA. In 2017 SciQuest was rebranded as JAGGAER and announced increased focus on offering a complete, integrated source-to-pay suite. Along with the name change, the company expanded its market focus to manufacturing, healthcare, consumer packaged goods, retail, education, life sciences, logistics and the public sector. JAGGAER acquired the European direct materials procurement specialist Pool4Tool in June 2017 giving it end-to-end direct as well as indirect materials procurement coverage. JAGGAER acquired spend management company BravoSolution in 2017, and entered into a joint venture with United Arab Emirates-based Tejari. In February 2019 JAGGAER launched JAGGAER One, which unifies its full product suite on a single platform. In 2019 the UK-based private equity firm Cinven acquired a majority holding in the company. Jim Bureau was subsequently named JAGGAER's Chief Executive Officer. Bureau left the firm in March 2023, and Andy Hovancik was announced as the company's CEO in June. In 2024, JAGGAER was acquired by Vista Equity Partners, a private equity firm specializing in enterprise software investments. == Current positioning == As of April 2025, JAGGAER positions itself as "an enterprise procurement and supplier collaboration SaaS provider." Its core technology platform, which is called JAGGAER One, serves "direct and indirect procurement with specializations in Higher Education, Discrete and Process Manufacturing, and Public Sector." == Product Categories == The JAGGAER One platform supports the following products: Spend Analytics Category Management Supplier Management Sourcing Contracts eProcurement Invoicing Inventory Management Supply Chain Collaboration Quality Management == Acquisitions == SciQuest acquired the following companies: AECsoft - January 2011. Provider of supplier management and sourcing technology. Upside Software, Inc. - August 2012. Provider of contract lifecycle management (CLM) solutions. Spend Radar, LLC - October 2012, Provider of spend analysis software. CombineNet - September 2013, Provider of advanced sourcing software JAGGAER acquired the following companies: POOL4TOOL - June 2017, Provider of direct sourcing and supply chain management software BravoSolution - December 2017, Provider of global platform spend management solutions
Read more →
ChatGPT

ChatGPT is a generative artificial intelligence chatbot developed by OpenAI. Originally released in November 2022, the product uses large language models—specifically generative pre-trained transformers (GPTs)—to generate text, speech, and images in response to user prompts. ChatGPT accelerated the AI boom, an ongoing period marked by rapid investment and public attention toward the field of artificial intelligence (AI). OpenAI operates the service on a freemium model. Users can interact with ChatGPT through text, audio, and image prompts. ChatGPT was quickly adopted, reaching 100 million monthly active users two months after its release and 900 million weekly active users in February 2026. It has been lauded for its potential to transform numerous professional fields, and has instigated public debate about the nature of creativity and the future of knowledge work. The chatbot has also been criticized for its limitations and potential for unethical use. It can generate plausible-sounding but incorrect or nonsensical answers, known as hallucinations. Biases in its training data have been reflected in its responses. The chatbot can facilitate academic dishonesty, generate misinformation, and create malicious code. The ethics of its development, particularly the use of copyrighted content as training data, have also drawn controversy. == Features == ChatGPT is a chatbot and AI assistant built on large language model (LLM) technology. It is designed to generate human-like text and can carry out a wide variety of tasks. These include, among many others, writing and debugging computer programs, composing music, scripts, fairy tales, and essays, answering questions (sometimes at a level exceeding that of an average human test-taker), and generating business concepts. ChatGPT is frequently used for translation and summarization tasks, and can simulate interactive environments such as a Linux terminal, a multi-user chat room, or simple text-based games such as tic-tac-toe. Users interact with ChatGPT through conversations which consist of text, audio, and image inputs and outputs. The user's inputs to these conversations are referred to as prompts. An optional "Memory" feature allows users to tell ChatGPT to memorize specific information. Another option allows ChatGPT to recall old conversations. GPT-based moderation classifiers are used to reduce the risk of harmful outputs being presented to users. In March 2023, OpenAI added support for plugins for ChatGPT. This includes both plugins made by OpenAI, such as web browsing and code interpretation, and external plugins from developers such as Expedia, OpenTable, and Zapier. From October to December 2024, ChatGPT Search was deployed. It allows ChatGPT to search the web in an attempt to make more accurate and up-to-date responses. It increased OpenAI's direct competition with major search engines. OpenAI allows businesses to tailor how their content appears in the ChatGPT Search results and influence what sources are used. In December 2024, OpenAI launched a new feature allowing users to call ChatGPT with a telephone for up to 15 minutes per month for free. In September 2025, OpenAI added a feature called Pulse, which generates a daily analysis of a user's chats and connected apps such as Gmail and Google Calendar. In October 2025, OpenAI launched ChatGPT Atlas, a browser integrating the ChatGPT assistant directly into web navigation, to compete with existing browsers such as Google Chrome. It has an additional feature called "agentic mode" that allows it to take online actions for the user. === Paid tier === ChatGPT was initially free to the public and remains free in a limited capacity. In February 2023, OpenAI launched a premium service, ChatGPT Plus, that costs US$20 per month. What was offered on the paid plan versus the free tier changed as OpenAI has continued to update ChatGPT, and a Pro tier at $200/mo was introduced in December 2024. The Pro launch coincided with the release of the o1 model. In August 2025, ChatGPT Go was offered in India for ₹399 per month. The plan has higher limits than the free version. === Mobile apps === In May-July 2023, OpenAI began offering ChatGPT iOS and Android apps. ChatGPT can also power Android's assistant. An app for Windows launched on the Microsoft Store on October 15, 2024. === Languages === OpenAI met Icelandic President Guðni Th. Jóhannesson in 2022. In 2023, OpenAI worked with a team of 40 Icelandic volunteers to fine-tune ChatGPT's Icelandic conversation skills as a part of Iceland's attempts to preserve the Icelandic language. ChatGPT (based on GPT-4) was better able to translate Japanese to English when compared to Bing, Bard, and DeepL Translator in 2023. In December 2023, the Albanian government decided to use ChatGPT for the rapid translation of European Union documents and the analysis of required changes needed for Albania's accession to the EU. Several studies have shown that ChatGPT can outperform Google Translate in some mainstream translation tasks. However, as of 2024, no machine translation services match human expert performance. In August 2024, a representative of the Asia Pacific wing of OpenAI made a visit to Taiwan, during which a demonstration of ChatGPT's Chinese abilities was made. ChatGPT's Mandarin Chinese abilities were lauded, but the ability of the AI to produce content in Mandarin Chinese in a Taiwanese accent was found to be "less than ideal" due to differences between mainland Mandarin Chinese and Taiwanese Mandarin. === GPT Store === In November 2023, OpenAI released GPT Builder, a tool allowing users to customize ChatGPT's behavior for a specific use case. The customized systems are referred to as GPTs. In January 2024, OpenAI launched the GPT Store, a marketplace for GPTs. At launch, OpenAI included more than 3 million GPTs created by GPT Builder users in the GPT Store. === ChatGPT Apps === In September 2025, OpenAI added support for Model Context Protocol (MCP) to ChatGPT apps. When enabled in developer mode, this allows for improved third-party access to ChatGPT tools and servers. === Deep Research === In February 2025, OpenAI released Deep Research, a feature that generates reports based on extensive web searches. It was initially based on the reasoning model o3 and took 5 to 30 minutes per report. === Images === In October 2023, OpenAI's image generation model DALL-E 3 was integrated into ChatGPT. The integration used ChatGPT to write prompts for DALL-E guided by conversations with users. In March 2025, OpenAI updated ChatGPT to generate images using GPT Image instead of DALL-E. One of the most significant improvements was in the generation of text within images, which is especially useful for branded content. However, this ability is noticeably worse in non-Latin alphabets. The model can also generate new images based on existing ones provided in the prompt. These images are generated with C2PA metadata, which can be used to verify that they are AI-generated. OpenAI has emplaced additional safeguards to prevent what the company deems to be harmful image generation. === Agents === In 2025, OpenAI added several features to make ChatGPT more agentic (capable of autonomously performing longer tasks). In January, Operator was released. It was capable of autonomously performing tasks through web browser interactions, including filling forms, placing online orders, scheduling appointments, and other browser-based tasks. It was controlling a software environment inside a virtual machine with limited internet connectivity and with safety restrictions. It struggled with complex user interfaces. In May 2025, OpenAI introduced an agent for coding named Codex. It is capable of writing software, answering codebase questions, running tests, and proposing pull requests. It is based on a fine-tuned version of OpenAI o3. It has two versions, one running in a virtual machine in the cloud, and one where the agent runs in the cloud, but performs actions on a local machine connected via API. In July 2025, OpenAI released ChatGPT agent, an AI agent that can perform multi-step tasks. Like Operator, it controls a virtual computer. It also inherits from Deep Research's ability to gather and summarize significant volumes of information. The user can interrupt tasks or provide additional instructions as needed. In September 2025, OpenAI partnered with Stripe, Inc. to release Agentic Commerce Protocol, enabling purchases through ChatGPT. At launch, the feature was limited to purchases on Etsy from US users with a payment method linked to their OpenAI account. OpenAI takes an undisclosed cut from the merchant's payment. === ChatGPT Health === On January 7, 2026, OpenAI introduced a feature called "ChatGPT Health", whereby ChatGPT can discuss the user's health in a way that is separate from other chats. The feature is not available for users in the United Kingdom, Switzerland, or the European Economic Area, and is available on a waitli
Read more →
Superellipsoid

In mathematics, a superellipsoid (or super-ellipsoid) is a solid whose horizontal sections are superellipses (Lamé curves) with the same squareness parameter ϵ 2 {\displaystyle \epsilon _{2}} , and whose vertical sections through the center are superellipses with the squareness parameter ϵ 1 {\displaystyle \epsilon _{1}} . It is a generalization of an ellipsoid, which is a special case when ϵ 1 = ϵ 2 = 1 {\displaystyle \epsilon _{1}=\epsilon _{2}=1} . Superellipsoids as computer graphics primitives were popularized by Alan H. Barr (who used the name "superquadrics" to refer to both superellipsoids and supertoroids). In modern computer vision and robotics literatures, superquadrics and superellipsoids are used interchangeably, since superellipsoids are the most representative and widely utilized shape among all the superquadrics. Superellipsoids have a rich shape vocabulary, including cuboids, cylinders, ellipsoids, octahedra and their intermediates. It becomes an important geometric primitive widely used in computer vision, robotics, and physical simulation. The main advantage of describing objects and environment with superellipsoids is its conciseness and expressiveness in shape. Furthermore, a closed-form expression of the Minkowski sum between two superellipsoids is available. This makes it a desirable geometric primitive for robot grasping, collision detection, and motion planning. == Special cases == A handful of notable mathematical figures can arise as special cases of superellipsoids given the correct set of values, which are depicted in the above graphic: Cylinder Sphere Steinmetz solid Bicone Regular octahedron Cube, as a limiting case where the exponents tend to infinity Piet Hein's supereggs are also special cases of superellipsoids. == Formulas == === Basic (normalized) superellipsoid === The basic superellipsoid is defined by the implicit function f ( x , y , z ) = ( x 2 ϵ 2 + y 2 ϵ 2 ) ϵ 2 / ϵ 1 + z 2 ϵ 1 {\displaystyle f(x,y,z)=\left(x^{\frac {2}{\epsilon _{2}}}+y^{\frac {2}{\epsilon _{2}}}\right)^{\epsilon _{2}/\epsilon _{1}}+z^{\frac {2}{\epsilon _{1}}}} The parameters ϵ 1 {\displaystyle \epsilon _{1}} and ϵ 2 {\displaystyle \epsilon _{2}} are positive real numbers that control the squareness of the shape. The surface of the superellipsoid is defined by the equation: f ( x , y , z ) = 1 {\displaystyle f(x,y,z)=1} For any given point ( x , y , z ) ∈ R 3 {\displaystyle (x,y,z)\in \mathbb {R} ^{3}} , the point lies inside the superellipsoid if f ( x , y , z ) < 1 {\displaystyle f(x,y,z)<1} , and outside if f ( x , y , z ) > 1 {\displaystyle f(x,y,z)>1} . Any "parallel of latitude" of the superellipsoid (a horizontal section at any constant z between -1 and +1) is a Lamé curve with exponent 2 / ϵ 2 {\displaystyle 2/\epsilon _{2}} , scaled by a = ( 1 − z 2 ϵ 1 ) ϵ 1 2 {\displaystyle a=(1-z^{\frac {2}{\epsilon _{1}}})^{\frac {\epsilon _{1}}{2}}} , which is ( x a ) 2 ϵ 2 + ( y a ) 2 ϵ 2 = 1. {\displaystyle \left({\frac {x}{a}}\right)^{\frac {2}{\epsilon _{2}}}+\left({\frac {y}{a}}\right)^{\frac {2}{\epsilon _{2}}}=1.} Any "meridian of longitude" (a section by any vertical plane through the origin) is a Lamé curve with exponent 2 / ϵ 1 {\displaystyle 2/\epsilon _{1}} , stretched horizontally by a factor w that depends on the sectioning plane. Namely, if x = u cos ⁡ θ {\displaystyle x=u\cos \theta } and y = u sin ⁡ θ {\displaystyle y=u\sin \theta } , for a given θ {\displaystyle \theta } , then the section is ( u w ) 2 ϵ 1 + z 2 ϵ 1 = 1 , {\displaystyle \left({\frac {u}{w}}\right)^{\frac {2}{\epsilon _{1}}}+z^{\frac {2}{\epsilon _{1}}}=1,} where w = ( cos 2 ϵ 2 ⁡ θ + sin 2 ϵ 2 ⁡ θ ) − ϵ 2 2 . {\displaystyle w=(\cos ^{\frac {2}{\epsilon _{2}}}\theta +\sin ^{\frac {2}{\epsilon _{2}}}\theta )^{-{\frac {\epsilon _{2}}{2}}}.} In particular, if ϵ 2 {\displaystyle \epsilon _{2}} is 1, the horizontal cross-sections are circles, and the horizontal stretching w {\displaystyle w} of the vertical sections is 1 for all planes. In that case, the superellipsoid is a solid of revolution, obtained by rotating the Lamé curve with exponent 2 / ϵ 1 {\displaystyle 2/\epsilon _{1}} around the vertical axis. === Superellipsoid === The basic shape above extends from −1 to +1 along each coordinate axis. The general superellipsoid is obtained by scaling the basic shape along each axis by factors a x {\displaystyle a_{x}} , a y {\displaystyle a_{y}} , a z {\displaystyle a_{z}} , the semi-diameters of the resulting solid. The implicit function is F ( x , y , z ) = ( ( x a x ) 2 ϵ 2 + ( y a y ) 2 ϵ 2 ) ϵ 2 ϵ 1 + ( z a z ) 2 ϵ 1 {\displaystyle F(x,y,z)=\left(\left({\frac {x}{a_{x}}}\right)^{\frac {2}{\epsilon _{2}}}+\left({\frac {y}{a_{y}}}\right)^{\frac {2}{\epsilon _{2}}}\right)^{\frac {\epsilon _{2}}{\epsilon _{1}}}+\left({\frac {z}{a_{z}}}\right)^{\frac {2}{\epsilon _{1}}}} . Similarly, the surface of the superellipsoid is defined by the equation F ( x , y , z ) = 1 {\displaystyle F(x,y,z)=1} For any given point ( x , y , z ) ∈ R 3 {\displaystyle (x,y,z)\in \mathbb {R} ^{3}} , the point lies inside the superellipsoid if f ( x , y , z ) < 1 {\displaystyle f(x,y,z)<1} , and outside if f ( x , y , z ) > 1 {\displaystyle f(x,y,z)>1} . Therefore, the implicit function is also called the inside-outside function of the superellipsoid. The superellipsoid has a parametric representation in terms of surface parameters η ∈ [ − π / 2 , π / 2 ) {\displaystyle \eta \in [-\pi /2,\pi /2)} , ω ∈ [ − π , π ) {\displaystyle \omega \in [-\pi ,\pi )} . x ( η , ω ) = a x cos ϵ 1 ⁡ η cos ϵ 2 ⁡ ω {\displaystyle x(\eta ,\omega )=a_{x}\cos ^{\epsilon _{1}}\eta \cos ^{\epsilon _{2}}\omega } y ( η , ω ) = a y cos ϵ 1 ⁡ η sin ϵ 2 ⁡ ω {\displaystyle y(\eta ,\omega )=a_{y}\cos ^{\epsilon _{1}}\eta \sin ^{\epsilon _{2}}\omega } z ( η , ω ) = a z sin ϵ 1 ⁡ η {\displaystyle z(\eta ,\omega )=a_{z}\sin ^{\epsilon _{1}}\eta } === General posed superellipsoid === In computer vision and robotic applications, a superellipsoid with a general pose in the 3D Euclidean space is usually of more interest. For a given Euclidean transformation of the superellipsoid frame g = [ R ∈ S O ( 3 ) , t ∈ R 3 ] ∈ S E ( 3 ) {\displaystyle g=[\mathbf {R} \in SO(3),\mathbf {t} \in \mathbb {R} ^{3}]\in SE(3)} relative to the world frame, the implicit function of a general posed superellipsoid surface defined the world frame is F ( g − 1 ∘ ( x , y , z ) ) = 1 {\displaystyle F\left(g^{-1}\circ (x,y,z)\right)=1} where ∘ {\displaystyle \circ } is the transformation operation that maps the point ( x , y , z ) ∈ R 3 {\displaystyle (x,y,z)\in \mathbb {R} ^{3}} in the world frame into the canonical superellipsoid frame. === Volume of superellipsoid === The volume encompassed by the superelllipsoid surface can be expressed in terms of the beta functions β ( ⋅ , ⋅ ) {\displaystyle \beta (\cdot ,\cdot )} , V ( ϵ 1 , ϵ 2 , a x , a y , a z ) = 2 a x a y a z ϵ 1 ϵ 2 β ( ϵ 1 2 , ϵ 1 + 1 ) β ( ϵ 2 2 , ϵ 2 + 2 2 ) {\displaystyle V(\epsilon _{1},\epsilon _{2},a_{x},a_{y},a_{z})=2a_{x}a_{y}a_{z}\epsilon _{1}\epsilon _{2}\beta ({\frac {\epsilon _{1}}{2}},\epsilon _{1}+1)\beta ({\frac {\epsilon _{2}}{2}},{\frac {\epsilon _{2}+2}{2}})} or equivalently with the Gamma function Γ ( ⋅ ) {\displaystyle \Gamma (\cdot )} , since β ( m , n ) = Γ ( m ) Γ ( n ) Γ ( m + n ) {\displaystyle \beta (m,n)={\frac {\Gamma (m)\Gamma (n)}{\Gamma (m+n)}}} == Recovery from data == Recoverying the superellipsoid (or superquadrics) representation from raw data (e.g., point cloud, mesh, images, and voxels) is an important task in computer vision, robotics, and physical simulation. Traditional computational methods model the problem as a least-square problem. The goal is to find out the optimal set of superellipsoid parameters θ ≐ [ ϵ 1 , ϵ 2 , a x , a y , a z , g ] {\displaystyle \theta \doteq [\epsilon _{1},\epsilon _{2},a_{x},a_{y},a_{z},g]} that minimize an objective function. Other than the shape parameters, g ∈ {\displaystyle g\in } SE(3) is the pose of the superellipsoid frame with respect to the world coordinate. There are two commonly used objective functions. The first one is constructed directly based on the implicit function G 1 ( θ ) = a x a y a z ∑ i = 1 N ( F ϵ 1 ( g − 1 ∘ ( x i , y i , z i ) ) − 1 ) 2 {\displaystyle G_{1}(\theta )=a_{x}a_{y}a_{z}\sum _{i=1}^{N}\left(F^{\epsilon _{1}}\left(g^{-1}\circ (x_{i},y_{i},z_{i})\right)-1\right)^{2}} The minimization of the objective function provides a recovered superellipsoid as close as possible to all the input points { ( x i , y i , z i ) ∈ R 3 , i = 1 , 2 , . . . , N } {\displaystyle \{(x_{i},y_{i},z_{i})\in \mathbb {R} ^{3},i=1,2,...,N\}} . At the mean time, the scalar value a x , a y , a z {\displaystyle a_{x},a_{y},a_{z}} is positively proportional to the volume of the superellipsoid, and thus have the effect of minimizing the volume as well. The other objective function tries to minimized the radial distance between the points and the superellipsoid. That is G 2 ( θ ) = ∑ i = 1 N ( | r
Read more →
Gcore

Gcore is an edge AI, cloud, network, and security company headquartered in Luxembourg. Founded in 2014, the company provides low-latency services to industries including finance, healthcare, manufacturing, gaming, media and telecommunications internationally. As of March 2024, its global network includes over 180 Points of Presence (PoPs) across six continents. == History == Gcore was founded in 2014 in Luxembourg. The company built its own content delivery network, originally designed for the needs of the gaming industry. In 2016, Gcore's infrastructure expanded to multiple regions that were underserved by hyperscale cloud providers. In 2020, the company formed partnerships with Intel and Equinix. In 2022, Gcore launched the European AI Cloud, providing access to infrastructure for machine learning tasks. In March 2024, Gcore announced the acquisition of a web application and API protection (WAAP) solution from StackPath. In April 2024, Gcore received a commendation in the Industry Innovation category at the NVIDIA Partner Network Awards EMEA for developing the first speech-to-text technology for Luxembourgish, using the LuxemBERT AI model. In May 2024, Philipp Rösler, former vice-chancellor of Germany and federal minister of health joined the Gcore board. In July 2024, Gcore raised $60 million in a Series A funding round, marking the company's first external investment since its founding. In August 2024, Gcore was recognized as a Major Player in the IDC MarketScape report for European public cloud Infrastructure (IaaS) 2024 by IDC, the global market intelligence firm. In May 2025, Feiyu Xu became a member of the Gcore advisory board. == Network infrastructure == According to the company's website, Gcore has network locations in six continents: Europe, North America, Asia, South America, Africa, and Australia with over 14,000 peering partners and a network capacity exceeding 200 Tbps. According to a 2025 review by Geekflare, Gcore's CDN achieved an average global response time of around 30 milliseconds. Gcore offers AI cloud clusters, including a generative AI cluster with Nvidia GPUs in Luxembourg and additional sites in the Netherlands and Wales, as part of its European AI infrastructure. == Products and services == Gcore offers a range of services, including content delivery network (CDN), cloud computing,virtual machines, bare-metal servers, object storage AI infrastructure and inference, Kubernetes, video streaming, DDoS mitigation, web application and API protection (WAAP), Domain Name System (DNS). Gcore provides AI services and GPU cloud infrastructure to support model development, training, fine-tuning, and inference. In January 2025, the company introduced Everywhere Inference, a serverless inference solution that enables AI model deployment. == Controversies == Correctiv and Tageszeitung reported that Gcore supported the distribution of the TV network RT until April 2023, which has been under sanctions by the EU since March 2022. However, Gcore denies these allegations. == Collaborations == In 2024, Gcore and Qareeb Data Centres, a data center provider in the Middle East, launched a collaboration to integrate Gcore's AI, cloud and edge services across data centers in multiple Middle Eastern countries. In June 2025, Gcore joined the SmartSpires initiative, a €3.1 million smart city project co-funded by the Connecting Europe Facility. The three-year programme is coordinated by a public–private consortium including 5SKYE, the Luxembourg Institute of Science and Technology (LIST), Orange Luxembourg, and Gcore. The project aims to transform the Belval campus into a smart city by deploying 5G-enabled smart towers that integrate edge computing, artificial intelligence and IoT services. Within the consortium, Gcore acts as project coordinator and is responsible for the deployment of the edge infrastructure.
Read more →
LIVAC Synchronous Corpus

LIVAC is an uncommon language corpus dynamically maintained since 1995. Different from other existing corpora, LIVAC has adopted a rigorous and regular "Windows" approach in processing and filtering massive media texts from representative Chinese speech communities such as Beijing, Hong Kong, Macau, Taipei, Singapore, Shanghai, as well as Guangzhou, and Shenzhen. The contents are thus deliberately repetitive in most cases, represented by textual samples drawn from editorials, local and international news, cross-Taiwan Strait news, as well as news on finance, sports and entertainment. By 2023, more than 3 billion characters of news media texts have been filtered, of which 700 million characters have been processed and analyzed and have yielded an expanding Pan-Chinese dictionary of 2.5 million words from the Pan-Chinese printed media. Through rigorous analysis based on computational linguistic methodology, LIVAC has at the same time accumulated a large amount of accurate and meaningful statistical data on the Chinese language and on their diverse speech communities in the Pan-Chinese context, and the results show considerable and important long standing as well as evolving variations. The "Windows" approach is the most innovative feature of LIVAC and has enabled Pan-Chinese media texts to be quantitatively analyzed according to various attributes such as locations, time and subject domains. Thus, various types of comparative studies and applications in information technology as well as development of often related innovative applications have been possible. Moreover, LIVAC has allowed longitudinal developments to be taken into account, facilitating Key Word in Context (KWIC) search and comprehensive study of target words and their underlying concepts as well as linguistic structures over the past 25 years, based on the above mentioned variables of location, time and subject. Results from the extensive and accumulative data analysis contained in LIVAC have enabled the cultivation of textual databases of proper names, place names, organization names, new words, and bi-weekly and annual rosters of media figures. Related applications have included the establishment of verb and adjective databases, the formulation of sentiment indices, and related opinion mining, to measure and compare the popularity of global media figures in the Chinese media (LIVAC Annual Pan-Chinese Celebrity Rosters, later renamed as the Pan-Chinese Newsmaker Rosters). Notable among these are the decades long periodic reviews of the 25 years of annual pan-Chinese rosters since 2000 and compilation of new word databases (LIVAC Annual Pan-Chinese New Word Rosters). On this basis, the analysis of the emergence, diffusion and transformation of new words, and the publication of dictionaries of neologisms have been made possible. A recent focus is on the relative balance between disyllabic words and growing trisyllabic words in the Chinese language, and the comparative study of light verbs in three Chinese speech communities. as well as the link between the language use and use of language as a reflection of epochal change in China. A new LIVAC version 3.1 was launched in February 2024. == Corpus data processing == Accessing media texts, manual input, etc. Text unification including conversion from simplified to traditional Chinese characters, stored as Big5 and Unicode versions Automatic word segmentation Automatic alignment of parallel texts Manual verification, part-of-speech tagging Extraction of words and addition to regional sub-corpora Combination of regional sub-corpora to update the LIVAC corpus, and master lexical database == Labeling for data curation == Categories used include general terms and proper names, such as: general names, surnames, semi titles; geographical, organizations and commercial entities, etc.; time, prepositions, locations, etc.; stack-words; loanwords; case-word; numerals, etc. Construction of databases of proper names, place names, and specific terms, etc. Generate rosters: "new word rosters", "celebrity or media personality rosters", "place name rosters", compound words and matched words Other parts of speech tagging for sub-database, such as common nouns, numerals, numeral classifiers, different types of verbs, and of adjectives, pronouns, adverbs, prepositions, conjunctions, particles marking mood, onomatopoeia, interjection, etc. == Applications == Compilation of Pan-Chinese dictionaries or local dictionaries Information technology research, such as predictive Chinese text input for mobile phones, automatic speech to text conversion, opinion mining Comparative studies on linguistic and cultural developments in the Pan-Chinese regions, especially in a critical period of history in modern China. Language teaching and learning research, and speech-to-text conversion Customized service on linguistic research and lexical search for international corporations and government agencies The above applications are provided by the following functions: Word Segmentation Search Phrase Search Example Sentence Selection Multi-word Comparison Word Cloud
Read more →
Language identification

In natural language processing, language identification or language guessing is the problem of determining which natural language a given content is in. Computational approaches to this problem view it as a special case of text categorization, solved with various statistical methods. == Overview == === Logical approach === A common non-statistical intuitive approach (though highly uncertain) is to look for common letter combinations, or distinctive diacritics or punctuation. === Statistical approach === There are several statistical approaches to language identification. An older statistical method by Grefenstette was based on the frequency of short n-grams, which are often function morphemes. For example, "ing" is more common in English than in French, while the sequence "que" is more common in French. Given a new page found on the Web, one counts the number of occurrences of each such short sequence and picks the language whose frequency table it matches the most. One technique is to compare the compressibility of the text to the compressibility of texts in a set of known languages. This approach is known as mutual information based distance measure. The same technique can also be used to empirically construct family trees of languages which closely correspond to the trees constructed using historical methods. Mutual information based distance measure is essentially equivalent to more conventional model-based methods and is not generally considered to be either novel or better than simpler techniques. Another technique, as described by Cavnar and Trenkle (1994) and Dunning (1994) is to create a language n-gram model from a "training text" for each of the languages. These models can be based on characters (Cavnar and Trenkle) or encoded bytes (Dunning); in the latter, language identification and character encoding detection are integrated. Then, for any piece of text needing to be identified, a similar model is made, and that model is compared to each stored language model. The most likely language is the one with the model that is most similar to the model from the text needing to be identified. This approach can be problematic when the input text is in a language for which there is no model. In that case, the method may return another, "most similar" language as its result. Also problematic for any approach are pieces of input text that are composed of several languages, as is common on the Web. As of 2025, a commonly used baseline method is via the fastText library, which has comparable classification accuracy as deep learning techniques, but much faster. == Identifying similar languages == One of the great bottlenecks of language identification systems is to distinguish between closely related languages. Similar languages like Bulgarian and Macedonian or Indonesian and Malay present significant lexical and structural overlap, making it challenging for systems to discriminate between them. In 2014 the DSL shared task has been organized providing a dataset (Tan et al., 2014) containing 13 different languages (and language varieties) in six language groups: Group A (Bosnian, Croatian, Serbian), Group B (Indonesian, Malaysian), Group C (Czech, Slovak), Group D (Brazilian Portuguese, European Portuguese), Group E (Peninsular Spanish, Argentine Spanish), Group F (American English, British English). The best system reached performance of over 95% results (Goutte et al., 2014). Results of the DSL shared task are described in Zampieri et al. 2014. == Software == Apache OpenNLP includes char n-gram based statistical detector and comes with a model that can distinguish 103 languages Apache Tika contains a language detector for 18 languages
Read more →
International Conference on Language Resources and Evaluation

The International Conference on Language Resources and Evaluation is an international conference organised by the ELRA Language Resources Association every other year (on even years) with the support of institutions and organisations involved in Natural language processing. The series of LREC conferences was launched in Granada in 1998. == History of conferences == The survey of the LREC conferences over the period 1998-2013 was presented during the 2014 conference in Reykjavik as a closing session. It appears that the number of papers and signatures is increasing over time. The average number of authors per paper is higher as well. The percentage of new authors is between 68% and 78%. The distribution between male (65%) and female (35%) authors is stable over time. The most frequent technical term is "annotation", then comes "part-of-speech". == The LRE Map == The LRE Map was introduced at LREC 2010 and is now a regular feature of the LREC submission process for both the conference papers and the workshop papers. At the submission stage, the authors are asked to provide some basic information about all the resources (in a broad sense, i.e. including tools, standards and evaluation packages), either used or created, described in their papers. All these descriptors are then gathered in a global matrix called the LRE Map. This feature has been extended to several other conferences.
Read more →
Round-trip engineering

Round-trip engineering (RTE) in the context of model-driven architecture is a functionality of software development tools that synchronizes two or more related software artifacts, such as, source code, models, configuration files, documentation, etc. between each other. The need for round-trip engineering arises when the same information is present in multiple artifacts and when an inconsistency may arise in case some artifacts are updated. For example, some piece of information was added to/changed in only one artifact (source code) and, as a result, it became missing in/inconsistent with the other artifacts (in models). == Overview == Round-trip engineering is closely related to traditional software engineering disciplines: forward engineering (creating software from specifications), reverse engineering (creating specifications from existing software), and reengineering (understanding existing software and modifying it). Round-trip engineering is often wrongly defined as simply supporting both forward and reverse engineering. In fact, the key characteristic of round-trip engineering that distinguishes it from forward and reverse engineering is the ability to synchronize existing artifacts that evolved concurrently by incrementally updating each artifact to reflect changes made to the other artifacts. Furthermore, forward engineering can be seen as a special instance of RTE in which only the specification is present and reverse engineering can be seen as a special instance of RTE in which only the software is present. Many reengineering activities can also be understood as RTE when the software is updated to reflect changes made to the previously reverse engineered specification. === Types === Various books describe two types of RTE: partial or uni-directional RTE: changes made to a higher level representation of a code and model are reflected in lower level, but not otherwise; the latter might be allowed, but with limitations that may not affect higher-level abstractions full or bi-directional RTE: regardless of changes, both higher and lower-level code and model representations are synchronized if any of them altered === Auto synchronization === Another characteristic of round-trip engineering is automatic update of the artifacts in response to automatically detected inconsistencies. In that sense, it is different from forward- and reverse engineering which can be both manual (traditionally) and automatic (via automatic generation or analysis of the artifacts). The automatic update can be either instantaneous or on-demand. In instantaneous RTE, all related artifacts are immediately updated after each change made to one of them. In on-demand RTE, authors of the artifacts may concurrently update the artifacts (even in a distributed setting) and at some point choose to execute matching to identify inconsistencies and choose to propagate some of them and reconcile potential conflicts. === Iterative approach === Round trip engineering may involve an iterative development process. After you have synchronized your model with revised code, you are still free to choose the best way to work – make further modifications to the code or make changes to your model. You can synchronize in either direction at any time and you can repeat the cycle as many times as necessary. == Software == Many commercial tools and research prototypes support this form of RTE; a 2007 book lists Rational Rose, Together, ESS-Model, BlueJ, and Fujaba among those capable, with Fujaba said to be capable to also identify design patterns. == Limitations == A 2005 book on Visual Studio notes for instance that a common problem in RTE tools is that the model reversed is not the same as the original one, unless the tools are aided by leaving laborious annotations in the source code. The behavioral parts of UML impose even more challenges for RTE. Usually, UML class diagrams are supported to some degree; however, certain UML concepts, such as associations and containment do not have straightforward representations in many programming languages which limits the usability of the created code and accuracy of code analysis/reverse engineering (e.g., containment is hard to recognize in the code). A more tractable form of round-trip engineering is implemented in the context of framework application programming interfaces (APIs), whereby a model describing the usage of a framework API by an application is synchronized with that application's code. In this setting, the API prescribes all correct ways the framework can be used in applications, which allows precise and complete detection of API usages in the code as well as creation of useful code implementing correct API usages. Two prominent RTE implementations in this category are framework-specific modeling languages and Spring Roo (Java). Round-trip engineering is critical for maintaining consistency among multiple models and between the models and the code in Object Management Group's (OMG) Model-driven architecture. OMG proposed the QVT (query/view/transformation) standard to handle model transformations required for MDA. To date, a few implementations of the standard have been created. (Need to present practical experiences with MDA in relation to RTE). == Controversies == === Code generation controversy === Code generation (forward-engineering) from models means that the user abstractly models solutions, which are connoted by some model data, and then an automated tool derives from the models parts or all of the source code for the software system. In some tools, the user can provide a skeleton of the program source code, in the form of a source code template where predefined tokens are then replaced with program source code parts during the code generation process. UML (if used for MDA) diagrams specification was criticized for lack the detail which is needed to contain the same information as is covered with the program source. Some developers even claim that "the Code is the design". == Disadvantages == There is a serious risk that the generated code will rapidly differ from the model or that the reverse-engineered model will lose its reflection on the code or a mix of these two problems as result of cycled reengineering efforts. Regarding behavioral/dynamic part of UML for features like statechart diagram there is no equivalents in programming languages. Their translation during code-generation will result in common programming statement (.e.g if,switch,enum) being either missing or misinterpreted. If edited and imported back may result in different or incomplete model. The same goes for code snippets used for code generation stage for the pattern-implementation and user-specific logic: intermixed they may not be easily reverse-engineered back. There is also general lack of advanced tooling for modelling that are comparable to that of modern IDEs (for testing, debugging, navigation, etc.) for general-purpose programming languages and domain-specific languages. == Examples in software engineering == Perhaps the most common form of round-trip engineering is synchronization between UML (Unified Modeling Language) models and the corresponding source code and entity–relationship diagrams in data modelling and database modelling. Round-trip engineering based on Unified Modeling Language (UML) needs three basic tools for software development: Source Code Editor; UML Editor for the Attributes and Methods; Visualisation of UML structure
Read more →
Google Mobile Services

Google Mobile Services (GMS) is a collection of proprietary applications and application programming interfaces (APIs) services from Google that are typically pre-installed on the majority of Android devices, such as smartphones, tablets, and smart TVs. GMS is not a part of the Android Open Source Project (AOSP), which means an Android manufacturer needs to obtain a license from Google in order to legally pre-install GMS on an Android device. This license is provided by Google without any licensing fees except in the EU. == Core applications == The following are core applications that are part of Google Mobile Services: Google Search Google Chrome YouTube Google Play Google Drive Gmail Google Meet Google Maps Google Photos Google TV YouTube Music === Historically === Google+ Google Hangouts Google Wallet Google Play Magazines Google Play Music Google Play Movies & TV Google Duo == Reception, competitors, and regulators == === FairSearch === Numerous European firms filed a complaint to the European Commission stating that Google had manipulated their power and dominance within the market to push their Services to be used by phone manufacturers. The firms were joined under the name FairSearch, and the main firms included were Microsoft, Expedia, TripAdvisor, Nokia and Oracle. FairSearch's major problem with Google's practices was that they believed Google were forcing phone manufacturers to use their Mobile Services. They claimed Google managed this by asking these manufacturers to sign a contract stating that they must preinstall specific Google Mobile Services, such as Maps, Search and YouTube, in order to get the latest version of Android. Google swiftly responded stating that they "continue to work co-operatively with the European Commission". === Aptoide === The third-party Android app store Aptoide also filed an EU competition complaint against Google once again stating that they are misusing their power within the market. Aptoide alleged that Google was blocking third-party app stores from being on Google Play, as well as blocking Google Chrome from downloading any third-party apps and app stores. As of June 2014, Google had not responded to these allegations. === Abuse of Android dominance === In May 2019, Umar Javeed, Sukarma Thapar, Aaqib Javeed vs. Google LLC & Ors. the Competition Commission of India ordered an antitrust probe against Google for abusing its dominant position with Android to block market rivals. In Prima Facie opinion the commission held that mandatory pre-installation of the entire Google Mobile Services (GMS) suite, under Mobile Application Distribution Agreements (MADA), amounts to the imposition of unfair conditions on the device manufacturers. === EU antitrust ruling === On July 18, 2018, the European Commission fined Google €4.34 billion for breaching EU antitrust rules which resulted in a change of licensing policy for the GMS in the EU. A new paid licensing agreement for smartphones and tablets shipped into the EEA was created. The change is that the GMS is now decoupled from the base Android and will be offered under a separate paid licensing agreement. === Privacy policy === At the same time, Google faced problems with various European data protection agencies, most notably In the United Kingdom and France. The problem they faced was that they had a set of 60 rules merged into one, which allowed Google to "track users more closely". Google once again came out and stated that their new policies still abide by European Union laws. === Android distributions without Google Mobile Services === After surveillance and privacy concerns, several custom android distributions have been implemented, such as GrapheneOS, LineageOS, CalyxOS, iodéOS or /e/OS, and they come either without any GMS installed by default or with microG, that adds a compatibility layer.
Read more →
Hybrid machine translation

Hybrid machine translation is a method of machine translation that is characterized by the use of multiple machine translation approaches within a single machine translation system. The motivation for developing hybrid machine translation systems stems from the failure of any single technique to achieve a satisfactory level of accuracy. Many hybrid machine translation systems have been successful in improving the accuracy of the translations, and there are several popular machine translation systems which employ hybrid methods. == Approaches == === Multi-engine === This approach to hybrid machine translation involves running multiple machine translation systems in parallel. The final output is generated by combining the output of all the sub-systems. Most commonly, these systems use statistical and rule-based translation subsystems, but other combinations have been explored. For example, researchers at Carnegie Mellon University have had some success combining example-based, transfer-based, knowledge-based and statistical translation sub-systems into one machine translation system. === Statistical rule generation === This approach involves using statistical data to generate lexical and syntactic rules. The input is then processed with these rules as if it were a rule-based translator. This approach attempts to avoid the difficult and time-consuming task of creating a set of comprehensive, fine-grained linguistic rules by extracting those rules from the training corpus. This approach still suffers from many problems of normal statistical machine translation, namely that the accuracy of the translation will depend heavily on the similarity of the input text to the text of the training corpus. As a result, this technique has had the most success in domain-specific applications, and has the same difficulties with domain adaptation as many statistical machine translation systems. === Multi-Pass === This approach involves serially processing the input multiple times. The most common technique used in multi-pass machine translation systems is to pre-process the input with a rule-based machine translation system. The output of the rule-based pre-processor is passed to a statistical machine translation system, which produces the final output. This technique is used to limit the amount of information a statistical system need consider, significantly reducing the processing power required. It also removes the need for the rule-based system to be a complete translation system for the language, significantly reducing the amount of human effort and labor necessary to build the system. === Confidence-Based === This approach differs from the other hybrid approaches in that in most cases only one translation technology is used. A confidence metric is produced for each translated sentence from which a decision can be made whether to try a secondary translation technology or to proceed with the initial translation output. SMT is also used when common error patterns such as multiple repeat words appear in sequence, as is common with NMT when the attention mechanism is confused.
Read more →