AI Data Jobs Near Me

AI Data Jobs Near Me — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Workplace robotics safety

Workplace robotics safety is an aspect of occupational safety and health when robots are used in the workplace. This includes traditional industrial robots as well as emerging technologies such as drone aircraft and wearable robotic exoskeletons. Types of accidents include collisions, crushing, and injuries from mechanical parts. Hazard controls include physical barriers, good work practices, and proper maintenance. == Background == Many workplace robots are industrial robots used in manufacturing. According to the International Federation of Robotics, 1.7 million new robots are expected to be used in factories between 2017 and 2020. Emerging robot technologies include collaborative robots, personal care robots, construction robots, exoskeletons, autonomous vehicles, and drone aircraft (also known as unmanned aerial vehicles or UAVs). Advances in automation technologies (e.g. fixed robots, collaborative and mobile robots, and exoskeletons) have the potential to improve work conditions but also to introduce workplace hazards in manufacturing workplaces. Fifty-six percent of robot injuries are classified as pinch injuries and 44% of injuries are classified as impact injuries. A 1987 study found that line workers are at the greatest risk, followed by maintenance workers, and programmers. Poor workplace design and human error caused most injuries. Despite the lack of occupational surveillance data on injuries associated specifically with robots, researchers from the US National Institute for Occupational Safety and Health (NIOSH) identified 61 robot-related deaths between 1992 and 2015 using keyword searches of the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries research database (see info from Center for Occupational Robotics Research). Using data from the Bureau of Labor Statistics, NIOSH and its state partners have investigated 4 robot-related fatalities under the Fatality Assessment and Control Evaluation Program. In addition the Occupational Safety and Health Administration (OSHA) has investigated robot-related deaths and injuries, which can be reviewed at OSHA Accident Search page. Injuries and fatalities could increase over time because of the increasing number of collaborative and co-existing robots, powered exoskeletons, and autonomous vehicles into the work environment. Safety standards are being developed by the Robotic Industries Association (RIA) in conjunction with the American National Standards Institute (ANSI). On October 5, 2017, OSHA, NIOSH and RIA signed an alliance to work together to enhance technical expertise, identify and help address potential workplace hazards associated with traditional industrial robots and the emerging technology of human-robot collaboration installations and systems, and help identify needed research to reduce workplace hazards. On October 16 NIOSH launched the Center for Occupational Robotics Research to "provide scientific leadership to guide the development and use of occupational robots that enhance worker safety, health, and well being". So far, the research needs identified by NIOSH and its partners include: tracking and preventing injuries and fatalities, intervention and dissemination strategies to promote safe machine control and maintenance procedures, and on translating effective evidence-based interventions into workplace practice. == Hazards == Many hazards and injuries can result from the use of robots in the workplace. Some robots, notably those in a traditional industrial environment, are fast and powerful. This increases the potential for injury as one swing from a robotic arm, for example, could cause serious bodily harm. There are additional risks when a robot malfunctions or is in need of maintenance. A worker who is working on the robot may be injured because a malfunctioning robot is typically unpredictable. For example, a robotic arm that is part of a car assembly line may experience a jammed motor. A worker who is working to fix the jam may suddenly get hit by the arm the moment it becomes unjammed. Additionally, if a worker is standing in a zone that is overlapping with nearby robotic arms, he or she may get injured by other moving equipment. There are four types of accidents that can occur with robots: impact or collision accidents, crushing and trapping accidents, mechanical part accidents, and other accidents. Impact or collision accidents occur generally from malfunctions and unpredicted changes. Crushing and trapping accidents occur when a part of a worker's body becomes trapped or caught on robotic equipment. Mechanical part accidents can occur when a robot malfunctions and starts to "break down", where the ejection of parts or exposed wire can cause serious injury. Other accidents at just general accidents that occur from working with robots. There are seven sources of hazards that are associated with human interaction with robots and machines: human errors, control errors, unauthorized access, mechanical failures, environmental sources, power systems, and improper installation. Human errors could be anything from one line of incorrect code to a loose bolt on a robotic arm. Many hazards can stem from human-based error. Control errors are intrinsic and are usually not controllable nor predictable. Unauthorized access hazards occur when a person who is not familiar with the area enters the domain of a robot. Mechanical failures can happen at any time, and a faulty unit is usually unpredictable. Environmental sources are things such as electromagnetic or radio interference in the environment that can cause a robot to malfunction. Power systems are pneumatic, hydraulic, or electrical power sources; these power sources can malfunction and cause fires, leaks, or electrical shocks. Improper installation is fairly self-explanatory; a loose bolt or an exposed wire can lead to inherent hazards. === Emerging technologies === Emerging robotic technologies can reduce hazards to workers, but can also introduce new hazards. For example, robotic exoskeletons can be used in construction to reduce load to the spine, improve posture, and reduce fatigue; however, they can also increase chest pressure, limit mobility when moving out of the way of a falling object, and cause balance problems. Unmanned aerial vehicles are being used in the construction industry to do monitoring and inspections of buildings under construction. This reduces the need for humans to be in hazardous locations, but the risk of a UAV collision presents a hazard to workers. For collaborative robots, isolation is not possible. Possible hazard controls include collision avoidance systems, and making the robot less stiff to lessen the impact force. Robotic tech vest is a wearable device for humans, worn in Amazon warehouses. == Hazard controls == There are a few ways to prevent injuries by implementing hazard controls. There can be risk assessments at each of the various stages of a robot's development. Risk assessments can help gather information about a robot's status, how well it is being maintained, and if repairs are needed soon. By being aware of the status of a robot, injuries can be prevented and hazards reduced. Safeguarding devices can be implemented to reduce the risk of injuries. These can include engineering controls such as physical barriers, guard rails, presence-sensing safeguarding devices, etc. Awareness devices are usually used in conjunction with safeguarding devices. They are usually a system of rope or chain barriers with lights, signs, whistles, and horns. Their purpose it to be able to alert workers or personnel of certain dangers. Operator safeguards can also be in place. These usually utilize safeguarding devices to protect the operator and reduce risk of injury. Additionally, when an operator is within close proximity of a robot, the working speed of the robot can be reduced to ensure that the operator is in full control. This can be done by placing the robot in the manual or teach mode. It is also crucial to inform the programmer of the robot of what type of work the robot will be doing, how it will interact with other robots, and how it will work in relation to an operator. Proper maintenance of robotic equipment is also critical in order to reduce hazards. Maintaining a robot insures that it continues to function properly, thereby reducing the risks associated with a malfunction. One common safeguard used in industrial settings is the installation of robot safety fencing. These barriers, often made from durable materials such as mesh or polycarbonate, prevent accidental interactions between workers and robotic systems, reducing the risk of injury. Robot safety fencing is particularly important in environments where high-speed or powerful robots are used. == Regulations == Some existing regulations regarding robots and robotic systems include: ANSI/RIA R15.06 OSHA 29 CFR 1910.333 OSHA 29 CFR 1910.147 ISO 10218 ISO/TS 15066 ISO/DIS 13482
Read more →
NAPLPS

NAPLPS (North American Presentation Layer Protocol Syntax) is a graphics language for use originally with videotex and teletext services. NAPLPS was developed from the Telidon system developed in Canada, with a small number of additions from AT&T Corporation. The basics of NAPLPS were later used as the basis for several other microcomputer-based graphics systems. == History == The Canadian Communications Research Centre (CRC), based in Ottawa, had been working on various graphics systems since the late 1960s, much of it led by Herb Bown. Through the 1970s they turned their attention to building out a system of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6-bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". These instructions were decoded by separate programs to produce graphics output, on a plotter for instance. Other work produced a fully interactive version. In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a color display. During this period, a number of companies were developing the first teletext systems, notably the BBC's Ceefax system. Ceefax encoded character data into the lines in the vertical blanking interval of normal television signals where they could not be seen on-screen, and then used a buffer and decoder in the user's television to convert these into "pages" of text on the display. The Independent Broadcasting Authority quickly introduced their own ORACLE system, and the two organizations subsequently agreed to use a single standard, the "Broadcast Teletext Specification". This later became World System Teletext. At about the same time, other organizations were developing videotex systems, similar to teletext except they used modems to transmit their data instead of television signals. This was potentially slower and used up a telephone line, but had the major advantage of allowing the user to transmit data back to the sender. The UK's General Post Office developed a system using the Ceefax/ORACLE standard, launching it as Prestel, while France prepared the first steps for its ultimately very successful Minitel system, using a rival display standard called Antiope. By 1977, the Norpak system was running, and from this work the CRC decided to create their own teletext/videotext system. Unlike the systems being rolled out in Europe, the CRC decided from the start that the system should be able to run on any combination of communications links. For instance, it could use the vertical blanking interval to send data to the user, and a modem to return selections to the servers. It could be used in a one-way or two-way system. In teletext mode, character codes were sent to users' televisions by encoding them as dot patterns in the vertical blanking interval of the video signal. Various technical "tweaks" and details of the NTSC signals used by North American televisions allowed the downstream videotex channel to increase to 600 bit/s, about twice that used in the European systems. In videotext mode, Bell 202 modems were typical, offering a 1,200 bit/s download rate. A set top box attached to the TV decoded these signals back into text and graphics pages, which the user could select among. The system was publicly launched as Telidon on August 15, 1978. Compared to the European standards, the CRC system was faster, bi-directional, and offered real graphics as opposed to simple character graphics. The downside of the system was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors with RGB and/or RF output. The Innovation, Science and Economic Development Canada (then Department of Communications) launched a four-year plan to fund public roll-outs of the technology in an effort to spur the development of a commercial Telidon system. AT&T Corporation was so impressed by Telidon that they decided to join the project. They added a number of useful extensions, notably the ability to define original graphics commands (macro) and character sets (DRCS). They also tabled algorithms for proportionally spaced text, which greatly improved the quality of the displayed pages. A joint CSA/ANSI working group (X3L2.1) revised the specifications, which were submitted for standardization. In 1983, they became CSA T500 and ANSI X3.110, or NAPLPS. The data encoding system was also standardized as the NABTS (North American Broadcast Teletext Specification) protocol. Business models for Telidon services were poorly developed. Unlike the UK, where teletext was supported by one of only two large companies whose whole revenue model was based on a read-only medium (television), in North America Telidon was being offered by companies who worked on a subscriber basis. == One-way systems == Telidon-based teletext was tested in a few North American trials in the early 1980s — CBC IRIS, TVOntario, MTS-sponsored Project IDA, to name a few. NAPLPS was also part of the NABTS teletext standard, for the encoding and display of teletext pages. In the late 1980s and early 1990s, affiliates of the regional sports network group SportsChannel ran a service called Sports Plus Network, which ran sports news and scores while SportsChannel was not otherwise on the air. The screens, which frequently featured team logos or likenesses of players in addition to text, were drawn entirely with NAPLPS graphics and resembled the loading of Prodigy pages over a modem, though slightly faster. == Two-way systems == Various two-way systems using NAPLPS appeared in North America in the early 1980s. The biggest North American examples were Knight Ridder's Viewtron (based in Miami) and the Los Angeles Times' Gateway service (based in Orange County). Both used the Sceptre NAPLPS terminal from AT&T. The Sceptre contained a slow modem that connected over the consumer's telephone line to host computers. The Sceptre was expensive whether purchased or rented. Despite huge investments by their parent companies, neither Viewtron nor Gateway lasted into the second half of the decade. Another system, Keyfax, was developed by Keycom Electronic Publishing, a joint venture of Honeywell, Centel (since acquired by Sprint) and Field Enterprises, then-owner of the Chicago Sun-Times newspaper. Keyfax had originally been a WST teletext service, broadcast overnights on Field's Chicago television station WFLD-32 and through the VBI of both WFLD and national superstation WTBS; the decision was made to convert Keyfax into a subscription service, using a proprietary NAPLPS terminal device in a last-ditch effort to save the service. It did not work and Keyfax had ceased operations by the end of 1986. Other early-1980s NAPLPS technology was deployed in Canada, both as a way for rural Canadians to get news and weather information and as the platform for touchscreen information kiosks. In Vancouver these were featured at Expo 86. The kiosks became ubiquitous in Toronto under the name Teleguide, and were deployed in many shopping centres and at major tourist attractions. The latter city was the North American nexus of NAPLPS and the home of Norpak, the most successful of NAPLPS-oriented developers. Norpak created and sold hardware and software for NAPLPS development and display. TVOntario also developed NAPLPS content creation software. London, Ontario - based Cableshare used NAPLPS as the basis of touch-screen information kiosks for shopping malls, the flagship of which was deployed at Toronto's Eaton Centre. The system relied on an 8085-based microcomputer which drove several NAPLPS terminals fitted with touch screens, all communicating via Datapac to a back end database. The system offered news, weather and sports information along with shopping mall guides and coupons. Cableshare also developed and sold a leading NAPLPS page creation utility called the "Picture Painter." In the late 1980s, Tribune Media Services (TMS) and the Associated Press operated a cable television channel called AP News Plus that provided NAPLPS-based news screens to cable television subscribers in many U.S. cities. The news pages were created and edited by TMS staffers working on an Atex editing system in Orlando, Florida, and sent by satellite to NAPLPS decoder devices located at the local cable television companies. Among the firms providing technology to TMS and the Associated Press for the AP News Plus channel was Minneapolis-based Electronic Publishers Inc. (1985–1988). In 1981, two amateur radio operators (VE3FTT and VE3GQW) received special permission from the Canad
Read more →
Dark mode

A dark mode, dark theme, night mode, or light-on-dark color scheme is a color scheme that uses light-colored text, icons, and graphical user interface elements on a dark background. It is often discussed in terms of computer user interface design and web design. Many modern websites and operating systems offer the user an optional light-on-dark display mode. Some users find dark mode displays more visually appealing, and claim that it can reduce eye strain. Displaying white at full brightness uses roughly six times as much power as pure black on a 2016 Google Pixel, which has an OLED display. However, conventional LED displays may not benefit from reduced power consumption; but if a LED display has the partial dimming features, it still benefits from reduced power consumption. Most modern operating systems support an optional light-on-dark color scheme. == History == Microsoft introduced the high contrast themes in Windows 95. Later, Microsoft introduced a dark theme in the Anniversary Update of Windows 10 in 2016. In 2018, Apple followed in macOS Mojave. In September 2019, iOS 13 and Android 10 both introduced dark modes. Some operating systems provide tools to change the dark mode state automatically at sundown or sunrise. A "prefers-color-scheme" option was created for front-end web developers in 2019, being a CSS property that signals a user's choice for their system to use a light or dark color theme. Firefox and Chromium have optional dark theme for all internal screens. It is also possible for third-party developers to implement their own dark themes. There are also a variety of browser add-ons that can re-theme web sites with dark color schemes, also aligning with system theme. Wikipedia's mobile and desktop versions received a dark mode option in 2024. == Implementation == There is a prefers-color-scheme media query in CSS, to detect if the user has requested light or dark color scheme and serve the requested color scheme. It can be indicated from the user's operating system preference or a user agent. CSS example: JavaScript example: == Energy usage == Light on dark color schemes require less energy to display on OLED displays. This positively impacts battery life and reduces energy consumption. While an OLED will consume around 40% of the power of an LCD displaying an image that is primarily black, it can use more than three times as much power to display an image with a white background, such as a document or web site. This can lead to reduced battery life and higher energy usage unless a light-on-dark color scheme is used. The long-term reduced power usage may also prolong battery life or the useful life of the display and battery. The energy savings that can be achieved using a light-on-dark color scheme are because of how OLED screens work: in an OLED screen, each subpixel generates its own light and it only consumes power when generating light. This is in contrast to how an LCD works: in an LCD, subpixels either block or allow light from an always-on (lit) LED backlight to pass through. "AMOLED Black" color schemes (that use pure black instead of dark gray) do not necessarily save more energy than other light-on-dark color schemes that use dark gray instead of black, as the power consumption on an AMOLED screen decreases proportionately to the average brightness of the displayed pixels. Although it is true that AMOLED black does save more energy than dark gray, the additional energy savings are often negligible; AMOLED black will only give an additional energy saving of less than 1%, for instance, over the dark gray that's used in the dark theme for Google's official Android apps. In November 2018, Google confirmed that dark mode on Android saved battery life. == Web issues == Some argue that a color scheme with light text on a dark background is easier to read on the screen, because the lower overall brightness causes less eyestrain, while others argue to the contrary. Some pages on the web are designed for white backgrounds; Image assets (GIF, PNG, SVG, WOFF, etc) can be used improperly causing visual artifacts if dark mode is forced (instead of designed for) with a plugin like Dark Reader.
Read more →
IMPACT (computer graphics)

IMPACT (sometimes spelled Impact) is a computer graphics architecture for Silicon Graphics computer workstations. IMPACT Graphics was developed in 1995 and was available as a high-end graphics option on workstations released during the mid-1990s. IMPACT graphics gives the workstation real-time 2D and 3D graphics rendering capability similar to that of even high-end PCs made well after IMPACT's introduction. IMPACT graphics systems consist of either one or two Geometry Engines and one or two Raster Engines in various configurations. IMPACT graphics consists of five graphics subsystems: the Command Engine, Geometry Subsystem, Raster Engine, framebuffer and Display Subsystem. IMPACT Graphics can produce resolutions up to 1600 x 1200 pixels with 32-bit color and can also process unencoded NTSC and PAL analog television signals. IMPACT graphics subsystems come in three configurations for SGI Indigo2 IMPACT workstations: Solid IMPACT, High IMPACT, and Maximum IMPACT. The equivalent configurations also exist for the SGI Octane workstation but are referred to as SI, SSI, and MXI (I-series). Later Octane workstations used a similar configuration but with updated ASIC chips and are referred to as SE, SSE, and MXE (E-series). IMPACT uses Rambus RDRAM for texture memory. The IMPACT graphics architecture was superseded by SGI's VPro graphics architecture in 1997.
Read more →
Microsoft Fresh Paint

Fresh Paint is a painting app developed by Microsoft and released on May 25, 2012. == History == Fresh Paint originated from a Microsoft Research project known as Project Gustav, an endeavor to reproduce the behavior of physical oil paint on a digital medium. To push the boundaries of simulating oil on a digital medium, the research team created a physics model that precisely replicated on a screen what would happen in the real world if you combined oil, a surface and a tool such as a paint brush. Two publications, Detail-Preserving Paint Modeling for 3D Brushes and Simple Data-Driven Modeling of Brushes, were released as a result of the team’s findings. After a variety of internal testing Project, Gustav was codenamed Digital Art. Partnering with The Museum of Modern Art, Digital Art was tested for a year by 60,000 people. With feedback culled from MoMA, developers expanded the existing physics model, experimenting with how real oil paint blended and reacted to the texture of a canvas. After final adjustments were made, Digital Art was rebranded as Fresh Paint. It was released to the public on 25 May 2012.
Read more →
Intel Management Engine

The Intel Management Engine (ME), also known as the Intel Manageability Engine, is an autonomous subsystem that has been incorporated in virtually all of Intel's processor chipsets since 2008. It is located in the Platform Controller Hub of modern Intel motherboards. The Intel Management Engine always runs as long as the motherboard is receiving power, even when the computer is turned off. This issue can be mitigated with the deployment of a hardware device which is able to disconnect all connections to mains power as well as all internal forms of energy storage. The Electronic Frontier Foundation and some security researchers have voiced concern that the Management Engine is a backdoor. Intel's main competitor, AMD, has incorporated the equivalent AMD Secure Technology (formally called Platform Security Processor) in virtually all of its post-2013 CPUs. == Difference from Intel AMT == The Management Engine is often confused with Intel AMT (Intel Active Management Technology). AMT runs on the ME, but is only available on processors with vPro. AMT gives device owners remote administration of their computer, such as powering it on or off, and reinstalling the operating system. However, the ME itself has been built into all Intel chipsets since 2008, not only those with AMT. While AMT can be unprovisioned by the owner, there is no official, documented way to disable the ME. == Design == The subsystem primarily consists of proprietary firmware running on a separate microprocessor that performs tasks during boot-up, while the computer is running, and while it is asleep. As long as the chipset or SoC is supplied with power (via battery or power supply), it continues to run even when the system is turned off. Intel claims the ME is required to provide full performance. Its exact workings are largely undocumented and its code is obfuscated using confidential Huffman tables stored directly in hardware, so the firmware does not contain the information necessary to decode its contents. === Hardware === Starting with ME 11 (introduced in Skylake CPUs), it is based on the Intel Quark x86-based 32-bit CPU and runs the MINIX 3 operating system. The ME firmware is stored in a partition of the SPI BIOS Flash, using the Embedded Flash File System (EFFS). Previous versions were based on an ARC core, with the Management Engine running the ThreadX RTOS. Versions 1.x to 5.x of the ME used the ARCTangent-A4 (32-bit only instructions) whereas versions 6.x to 8.x used the newer ARCompact (mixed 32- and 16-bit instruction set architecture). Starting with ME 7.1, the ARC processor could also execute signed Java applets. The ME has its own MAC and IP address for the out-of-band management interface, with direct access to the Ethernet controller; one portion of the Ethernet traffic is diverted to the ME even before reaching the host's operating system, for what support exists in various Ethernet controllers, exported and made configurable via Management Component Transport Protocol (MCTP). The ME also communicates with the host via PCI interface. Under Linux, communication between the host and the ME is done via /dev/mei or /dev/mei0. Until the release of Nehalem processors, the ME was usually embedded into the motherboard's northbridge, following the Memory Controller Hub (MCH) layout. With the newer Intel architectures (Intel 5 Series onwards), the ME is integrated into the Platform Controller Hub (PCH). === Firmware === By Intel's current terminology as of 2017, ME is one of several firmware sets for the Converged Security and Manageability Engine (CSME). Prior to AMT version 11, CSME was called Intel Management Engine BIOS Extension (Intel MEBx). Management Engine (ME) – mainstream chipsets Server Platform Services (SPS) – server chipsets and SoCs Trusted Execution Engine (TXE) – tablet/embedded/low power It was also found that the ME firmware version 11 runs MINIX 3. Management of the ME modules for provisioning inside the UEFI is done via a tool called Intel Flash Image Tool (FITC). ==== Modules ==== Active Management Technology (AMT) Intel Boot Guard (IBG) and Secure Boot Quiet System Technology (QST), formerly known as Advanced Fan Speed Control (AFSC), which provides support for acoustically optimized fan speed control, and monitoring of temperature, voltage, current and fan speed sensors that are provided in the chipset, CPU and other devices present on the motherboard. Communication with the QST firmware subsystem is documented and available through the official software development kit (SDK). Protected Audio Video Path, enforces HDCP Intel Anti-Theft Technology (AT), discontinued in 2015 Serial over LAN (SOL) Intel Platform Trust Technology (PTT), a firmware-based Trusted Platform Module (TPM) Near Field Communication, a middleware for NFC readers and vendors to access NFC cards and provide secure element access, found in later MEI versions. == The intricacies of working with Intel ME == It should also be noted that the ME region requires special cleaning and subsequent initialisation, for example, after replacing the platform hub on the motherboard. Usually, this requires an SPI programmer. There are known successful cases of this operation being performed. == Security vulnerabilities == Several weaknesses have been found in the ME. On May 1, 2017, Intel confirmed a Remote Elevation of Privilege bug (SA-00075) in its Management Technology. Every Intel platform with provisioned Intel Standard Manageability, Active Management Technology, or Small Business Technology, from Nehalem in 2008 to Kaby Lake in 2017 has a remotely exploitable security hole in the ME. Several ways to disable the ME without authorization that could allow ME's functions to be sabotaged have been found. Additional major security flaws in the ME affecting a very large number of computers incorporating ME, Trusted Execution Engine (TXE), and Server Platform Services (SPS) firmware, from Skylake in 2015 to Coffee Lake in 2017, were confirmed by Intel on November 20, 2017 (SA-00086). Unlike SA-00075, this bug is even present if AMT is absent, not provisioned or if the ME was "disabled" by any of the known unofficial methods. In July 2018, another set of vulnerabilities was disclosed (SA-00112). In September 2018, yet another vulnerability was published (SA-00125). === Ring −3 rootkit === A ring −3 rootkit was demonstrated by Invisible Things Lab for the Q35 chipset; it does not work for the later Q45 chipset as Intel implemented additional protections. The exploit worked by remapping the normally protected memory region (top 16 MB of RAM) reserved for the ME. The ME rootkit could be installed regardless of whether the AMT is present or enabled on the system, as the chipset always contains the ARC ME coprocessor. (The "−3" designation was chosen because the ME coprocessor works even when the system is in the S3 state. Thus, it was considered a layer below the System Management Mode rootkits.) For the vulnerable Q35 chipset, a keystroke logger ME-based rootkit was demonstrated by Patrick Stewin. === Zero-touch provisioning === Another security evaluation by Vassilios Ververis showed serious weaknesses in the GM45 chipset implementation. In particular, it criticized AMT for transmitting unencrypted passwords in the SMB provisioning mode when the IDE redirection and Serial over LAN features are used. It also found that the "zero touch" provisioning mode (ZTC) is still enabled even when the AMT appears to be disabled in BIOS. For about 60 euros, Ververis purchased from GoDaddy a certificate that is accepted by the ME firmware and allows remote "zero touch" provisioning of (possibly unsuspecting) machines, which broadcast their HELLO packets to would-be configuration servers. === SA-00075 (a.k.a. Silent Bob is Silent) === In May 2017, Intel confirmed that many computers with AMT have had an unpatched critical privilege escalation vulnerability (CVE-2017-5689). The vulnerability was nicknamed "Silent Bob is Silent" by the researchers who had reported it to Intel. It affects numerous laptops, desktops and servers sold by Dell, Fujitsu, Hewlett-Packard (later Hewlett Packard Enterprise and HP Inc.), Intel, Lenovo, and possibly others. Those researchers claimed that the bug affects systems made in 2010 or later. Other reports claimed the bug also affects systems made as long ago as 2008. The vulnerability was described as giving remote attackers: "full control of affected machines, including the ability to read and modify everything. It can be used to install persistent malware (possibly in firmware), and read and modify any data." === PLATINUM === In June 2017, the PLATINUM cybercrime group became notable for exploiting the serial over LAN (SOL) capabilities of AMT to perform data exfiltration of stolen documents. SOL is disabled by default and must be enabled to exploit this vulnerability. === SA-00086 === Some months after the previous bugs, and subsequent warnings from the EFF, securi
Read more →
Display list

A display list, also called a command list in Direct3D 12 and a command buffer in Vulkan, is a series of graphics commands or instructions that are run when the list is executed. Systems that make use of display list functionality are called retained mode systems, while systems that do not are as opposed to immediate mode systems. In OpenGL, display lists are useful to redraw the same geometry or apply a set of state changes multiple times. This benefit is also used with Direct3D 12's bundle command lists. In Direct3D 12 and Vulkan, display lists are regularly used for per-frame recording and execution. == Origins in vector displays == The vector monitors or calligraphic displays of the 1960s and 1970s used electron beam deflection to draw line segments, points, and sometimes curves directly on a CRT screen. Because the image would immediately fade, it needed to be redrawn many times a second (storage tube CRTs retained the image until blanked, but they were unsuitable for interactive graphics). To refresh the display, a dedicated CPU called a Display Processor or Display Processing Unit (DPU) was used, which had a memory buffer for a "display list", "display file", or "display program" containing line segment coordinates and other information. Advanced Display Processors also supported control flow instructions, which were useful for drawing repetitive graphics such as text, and some could perform coordinate transformations such as 3D projection. == Home computer display list functionality == One of the earliest systems with a true display list was the Atari 8-bit computers. The display list (actually called so in Atari terminology) is a series of instructions for ANTIC, the video co-processor used in these machines. This program, stored in the computer's memory and executed by ANTIC in real-time, can specify blank lines, any of six text modes and eight graphics modes, which sections of the screen can be horizontally or vertically fine-scrolled, and trigger Display List Interrupts (called raster interrupts or HBI on other systems). The Amstrad PCW family contains a Display List function called the 'Roller RAM'. This is a 512-byte RAM area consisting of 256 16-bit pointers in RAM, one for each line of the 720 × 256 pixel display. Each pointer identifies the location of 90 bytes of monochrome pixels that hold the line's 720 pixel states. The 90 bytes of 8 pixel states are spaced at 8-byte intervals, so there are 7 unused bytes between each byte of pixel data. This suits how the text-orientated PCW constructs a typical screen buffer in RAM, where the first character's 8 rows are stored in the first 8 bytes, the second character's rows in the next 8 bytes, and so on. The Roller RAM was implemented to speed up display scrolling as it would have been unacceptably slow for its 3.4 MHz Z80 to move up the 23 KB display buffer 'by hand' i.e. in software. The Roller RAM starting entry used at the beginning of a screen refresh is controlled by a Z80-writable I/O register. Therefore, the screen can be scrolled simply by changing this I/O register. Another system using a Display List-like feature in hardware is the Amiga, which, not coincidentally, was also designed by some of the same people who developed the custom hardware for the Atari 8-bit computers. Once directed to produce a display mode, it would continue to do so automatically for every following scan line. The computer also included a dedicated co-processor, called "Copper", which ran a simple program or 'Copper List' intended for modifying hardware registers in sync with the display. The Copper List instructions could direct the Copper to wait for the display to reach a specific position on the screen, and then change the contents of hardware registers. In effect, it was a processor dedicated to servicing raster interrupts. The Copper was used by Workbench to mix multiple display modes (multiple resolutions and color palettes on the monitor at the same time), and by numerous programs to create rainbow and gradient effects on the screen. The Amiga Copper was also capable of reconfiguring the sprite engine mid-frame, with only one scanline of delay. This allowed the Amiga to draw more than its 8 hardware sprites, so long as the additional sprites did not share scanlines (or the one scanline gap) with more than 7 other sprites. i.e., so long as at least one sprite had finished drawing, another sprite could be added below it on the screen. Additionally, the later 32-bit AGA chipset allowed the drawing of bigger sprites (more pixels per row) while retaining the same multiplexing. The Amiga also had dedicated block-shifter ("blitter") hardware, which could draw larger objects into a framebuffer. This was often used in place of, or in addition to, sprites. In more primitive systems, the results of a display list can be simulated, though at the cost of CPU-intensive writes to certain display modes, color control, or other visual effect registers in the video device, rather than a series of rendering commands executed by the device. Thus, one must create the displayed image using some other rendering process, either before or while the CPU-driven display generation executes. In many cases, the image is also modified or re-rendered between frames. The image is then displayed in various ways, depending on the exact way in which the CPU-driven display code is implemented. Examples of the results possible on these older machines requiring CPU-driven video include effects such as Commodore 64/128's FLI mode, or Rainbow Processing on the ZX Spectrum. == Usage in OpenGL == To delimit a display list, the glNewList and glEndList functions are used, and to execute the list, the glCallList function is used. Almost all rendering commands that occur between the function calls are stored in the display list. Commands that affect the client state are not stored in display lists. Display lists are named with an integer value, and creating a display list with the same name as one already created overrides the first. The glNewList function expects two arguments: an integer representing the name of the list, and an enumeration for the compilation mode. The two modes include GL_COMPILE_AND_EXECUTE, which compiles and immediately executes, and GL_COMPILE, which only compiles the list. Display lists enable the use of the retained mode rendering pattern, which is a system in which graphics commands are recorded (retained) to execute in succession at a later time. This is contrary to immediate mode, where graphics commands are immediately executed on client calls. == Usage in Direct3D 12 == Command lists are created using the ID3D12Device::CreateCommandList function. Command lists may be created in several types: direct, bundle, compute, copy, video decode, video process, and video encoding. Direct command lists specify that a command list the GPU can execute, and doesn't inherit any GPU state. Bundles, are best used for storing and executing small sets of commands any number of times. This is used differently than regular command lists, where commands stored in a command list are typically executed only once. Compute command lists are used for general computations, with a common use being calculating mipmaps. A copy command list is strictly for copying and the video decode and video process command lists are for video decoding and processing respectively. Upon creation, command lists are in the recording state. Command lists may be re-used by calling the ID3D12GraphicsCommandList::Reset function. After recording commands, the command list must be transitioned out of the recording state by calling ID3D12GraphicsCommandList::Close. The command list is then executed by calling ID3D12CommandQueue::ExecuteCommandLists.
Read more →
Data administration

Data administration or data resource management is an organizational function working in the areas of information systems and computer science that plans, organizes, describes and controls data resources. Data resources are usually stored in databases under a database management system or other software such as electronic spreadsheets. In many smaller organizations, data administration is performed occasionally, or is a small component of the database administrator’s work. In the context of information systems development, data administration ideally begins at system conception, ensuring there is a data dictionary to help maintain consistency, avoid redundancy, and model the database so as to make it logical and usable, by means of data modeling, including database normalization techniques. == Data resource management == According to the Data Management Association (DAMA), data resource management is "the development and execution of architectures, policies, practices and procedures that properly manage the full data lifecycle needs of an enterprise". Data Resource management may be thought of as a managerial activity that applies information system and other data management tools to the task of managing an organization’s data resource to meet a company’s business needs, and the information they provide to their shareholders. From the perspective of database design, it refers to the development and maintenance of data models to facilitate data sharing between different systems, particularly in a corporate context. Data Resource Management is also concerned with both data quality and compatibility between data models. Since the beginning of the information age, businesses need all types of data on their business activity. With each data created, when a business transaction is made, need data is created. With these data, new direction is needed that focuses on managing data as a critical resource of the organization to directly support its business activities. The data resource must be managed with the same intensity and formality that other critical resources are managed. Organizations must emphasize the information aspect of information technology, determine the data needed to support the business, and then use appropriate technology to build and maintain a high-quality data resource that provides that support. Data resource quality is a measure of how well the organization's data resource supports the current and the future business information demand of the organization. The data resource cannot support just the current business information demand while sacrificing the future business information demand. It must support both the current and the future business information demand. The ultimate data resource quality is stability across changing business needs and changing technology. A corporate data resource must be developed within single, organization-wide common data architecture. A data architecture is the science and method of designing and constructing a data resource that is business driven, based on real-world objects and events as perceived by the organization, and implemented into appropriate operating environments. It is the overall structure of a data resource that provides a consistent foundation across organizational boundaries to provide easily identifiable, readily available, high-quality data to support the business information demand. The common data architecture is a formal, comprehensive data architecture that provides a common context within which all data at an organization's disposal are understood and integrated. It is subject oriented, meaning that it is built from data subjects that represent business objects and business events in the real world that are of interest to the organization and about which data are captured and maintained.
Read more →
Faceu

FaceU (Chinese: 激萌) is a camera app for smartphones running Android or Apple iOS that edits portrait photographs, typically selfies. This app uses AR technology to allow users to add stickers or effects in real-time when taking selfies and videos. It was launched in 2016 and had 250 million registered users in 2017. Most of the users of Faceu are females from 15 to 35 years old. In February 2018, Faceu was acquired by Chinese media startup Toutiao, which is worth about $300 million. The app was banned in India (along with other Chinese apps) on 2 September 2020 by the government, the move came amid the 2020 China-India skirmish. == Online marketing == FaceU is one of several selfie camera apps in China, including MeituPic, Pitu, and Camera360. The app includes social functions such as instant messaging and video chat. Photos and short videos are deleted after a short period. . FaceU has worked with brands to create themed stickers for social media campaigns. In 2016, Faceu collaborated with MeituPic's Meipai and launched a rainbow effect. In October 2017, during the Mid-Autumn Festival and National Day, FaceU released a feature that applied historical or military costumes to selfies. The app has also worked with various social media personalities and celebrities, who have posted content using FaceU effects. Faceu group engages users' emotions utilizing key opinion leaders (KOL) and posters on social media. == Usage and Demographics == FaceU had a large user base. According to industry sources, the app had more than 90 million monthly active users (MAU) and over 11 million daily active users (DAU) at certain points. Most of the users were under 30 and mainly women. The app was especially popular in major Chinese cities like Beijing, Shanghai, and Guangzhou. FaceU also caught on in other parts of East Asia, particularly Japan and South Korea. Some app stores claim the app had hundreds of millions of users worldwide, but these numbers mostly come from the company’s marketing materials and have not been confirmed by independent sources. == Product Features == FaceU includes face recognition and live augmented reality (AR) effects. It allows users to add filters and stickers in real time while they are recording, rather than having to apply them later. The app integrates beauty filters, tools to create emojis and GIFs, and follow-video functionality that automatically tracks the face and movements as it records. Studies and market reports indicate that augmented reality (AR) filters and beautification tools are now common in smartphone photography. These features have influenced the way people take photos and what they expect photos to look like when shared online. Adding AR filters and beautification options has become a standard feature that most mobile photography apps now include.
Read more →
Zynn

Zynn was a Chinese video-sharing social networking service owned by Kuaishou, a Beijing-based internet technology company established in 2011 by Su Hua and Cheng Yixiao. It was used to create and share short videos, and it pays its users for using the app and referring others. Zynn was launched on May 7, 2020. It became the most-downloaded app in the App Store in the same month. It has also been criticized for being a "pyramid scheme", and it has faced accusations of plagiarism and stealing content. Aside from Zynn in North America, Kuaishou is available under the name Kwai in Russia, South Korea, Japan, Thailand, Vietnam, Philippines, Malaysia, Indonesia, Brazil, America, India, and the Middle East. Kwai used to be available in Australia and the United States on the App Store, but was removed at an unknown date. Zynn was permanently shut down on the 20th of August, 2021. == History == In 2011, entrepreneur Su Hua co-founded Kuaishou with business partner Cheng Yixiao. Originally a GIF-making app, Kuaishou soon moved to short video content. Su Hua also serves as the current Kuaishou CEO. In December 2019, Chinese internet conglomerate Tencent invested $2 billion in Kuaishou, reportedly to compete with rival ByteDance. In December 2019, Kuaishou acquired an app developer called Owlii, which is the developer of Zynn. Zynn was developed to be a North American Market edition of Kuaishou. On May 7, 2020, the app was launched and it was downloaded over 2 million times in that month. On May 12, 2020, Kuaishou filed a lawsuit seeking compensation for "unfair competition", and accused Douyin, the sister app of TikTok, of "interfering" with search results on app stores. Zynn shut down on the 20th of August, 2021. == Features == Zynn allows its users to create, edit and share short videos of themselves. Its interface has been described as a "complete clone" of TikTok, its main competitor. The Zynn app was unique in the way that they paid users for using the platform. Each user earned $1 for signing up, and they could earn money for referring users to the platform. Watching videos resulted in earning "points", which could be redeemed for gift cards or be cashed out via PayPal.[1] == Criticisms and controversies == Multiple TikTok users had reported seeing their entire accounts plagiarized, with one account pretending to be Addison Rae. Despite being launched in May, many videos were posted in February. Zynn has employed "intermittent variable rewards" in its point system, which has been criticized as being the "same reinforcement strategy used to addict people to slot machines". Cash payouts for using the app have resulted in criticism and accusations of anti-competitive behavior. The app was taken down from the Google Play store on June 10. Zynn blamed it on an "isolated incident". Six days later, it was taken down from the App Store as well. US Senator Josh Hawley has criticized the platform, calling it "predatory" and "anti-competitive" in a letter to the Federal Trade Commission asking for an investigation into Zynn. He said "[Zynn] smacks of a textbook predatory-pricing scheme, one calculated to attain immediate market dominance for Zynn by driving competitors out of the market."
Read more →
GoodRx

GoodRx Holdings, Inc. is an American healthcare company that operates a telemedicine platform and free-to-use website and mobile app that track prescription drug prices in the United States and provide drug coupons for discounts on medications. GoodRx compares prescription drug prices at more than 75,000 pharmacies in the United States. The platform allows users to consult a doctor online and obtain a prescription for certain types of medications. == History == === Financial performance === GoodRx was founded in Santa Monica, California in 2011. GoodRx experienced substantial growth in net income in 2017 ($9 million), 2018 ($44 million), and 2019 ($66 million), but recorded a loss of $293.6 million in 2020 due to IPO-related expenses. In September 2020, GoodRx went public on the Nasdaq under the ticker symbol GDRX. The company priced its initial public offering at $33 per share, above the expected range of $24 to $28, raising more than $1.1 billion at an initial valuation of approximately $12.7 billion. In the first half of 2020, the company reported revenues of $257 million and net income of $55 million. GoodRx generated $745.4 million in revenue for the full year 2021, a 35.36% increase over 2020. During the first half of 2021, the company’s share price declined by 10.7%. The decline was attributed to increased competition in online pharmacy services and slower user growth. GoodRx reported full-year revenue of $766.6 million, with adjusted EBITDA reaching $213.5 million, exceeding guidance in the fourth quarter. GoodRx reported that 41% of prescriptions filled using its coupons were newly adherent, meaning they would not have been filled without the service. GoodRx reported a full-year 2023 revenue of $750.3 million, a decrease of 2.1% from 2022. However, its fourth-quarter revenue increased by 7% year-over-year. GoodRx achieved an Adjusted EBITDA of $217.4 million for the year and an Adjusted EBITDA Margin of 28.6%. In 2024, GoodRx achieved 6% revenue growth with $792.3 million for the full year and turned a net loss into a positive net income of $16.4 million. The company also demonstrated strong operational efficiency, with a 32.8% increase in full-year Adjusted EBITDA. In Q2 2025, GoodRx reported revenue of $203.1 million, a 1.2% increase from the previous year, and a net income of $12.8 million, a significant 92% jump, which resulted in a 6.3% net income margin. However, prescription transaction revenue declined by 3% due to a decrease in monthly active consumers, but this was offset by strong 32% growth in its Pharma Manufacturer Solutions business. GoodRx also saw a 7% decrease in subscription revenue. === Mergers and acquisitions === In 2019, GoodRx acquired HeyDoctor, a telemedicine company, to integrate virtual healthcare services into the platform. In 2021, a health video content producer, HealthiNation was acquired by GoodRx, which helped provide consumers with health information and offered pharmaceutical manufacturers new ways to reach relevant audiences. In April 2022, GoodRx acquired VitaCare Prescription Services from TherapeuticsMD to strengthen its pharma manufacturer solutions business. === Partnerships === In 2017, the company announced partnerships with major pharmaceutical companies to negotiate lower prescription drug costs. GoodRx has deep relationships with major pharmacy chains, including Walgreens, Walmart, CVS Caremark, and Publix, to allow customers to use GoodRx discounts and Gold benefits. GoodRx began its partnership with CVS Caremark in July 2023 to automatically apply coupons to insured CVS customers purchasing generic prescriptions at certain locations. In April 2024, GoodRx added Publix into its network, allowing GoodRx Gold members to use their cards at Publix Pharmacies. GoodRx partners with Pharmacy Benefit Management like Caremark, Express Scripts, and MedImpact to apply their savings directly to eligible insurance plans and members. GoodRx partners with companies like Affirm, Benefitfocus, and DoorDash to integrate their services that offer members discounts and financial flexibility for prescriptions. GoodRx also partners with organizations like the American Academy of Family Physicians Foundation to support broader access to care. In October 2022, GoodRx launched Provider Mode, which allows healthcare providers to use the app to compare costs of drugs for patients based on different payment methods and drug alternatives. In 2025, GoodRx partnered with Novo Nordisk to offer discounted cash-pay access to semaglutide products like Ozempic and Wegovy through its platform and participating pharmacies. == Products and services == GoodRx started its telemedicine service GoodRx Care in September 2019. It lets people talk to a licensed provider online for common issues and get prescriptions even if they don't have insurance. They also run condition-specific subscription plans that bundle online doctor visits, FDA-approved meds, and home delivery into one monthly payment. On the weight management side, GoodRx offers prescriptions for GLP-1 drugs like semaglutide through their telemedicine platform. This got a boost when the oral version of Wegovy became widely available in the US in early 2026. GoodRx works with drug makers like Novo Nordisk to make some medications (including semaglutide options) more affordable for people paying cash. The telemedicine part took off after GoodRx bought HeyDoctor in 2019 and brought their virtual care tools into the main platform. == Key people == The Santa Monica-based startup was founded in September 2011 by Trevor Bezdek and former Facebook executives Doug Hirsch and Scott Marlette. Marlette was one of the first 20 employees at Facebook and built Facebook's photo application. In 2005, Hirsch was the Vice President of Product at Facebook, working closely with Mark Zuckerberg. Bezdek and Hirsch served as co-chief executive officers until April 2023, when they stepped down from those roles and technology executive Scott Wagner was appointed interim chief executive officer. Bezdek became chair of the board, while Hirsch took on the role of chief mission officer. In December 2024, GoodRx announced that healthcare executive Wendy Barnes would become president and chief executive officer effective January 1, 2025. As of 2025, Barnes serves as the company’s CEO, while Trevor Bezdek and Scott Wagner serve as co-chairs of the board, and Doug Hirsch remains involved as a co-founder and senior executive. == Controversy == On February 25, 2020, Consumer Reports published an article stating that GoodRx shared user data—specifically, pseudonymized advertising ID numbers that companies use to track the behavior of web users across websites, the names of the drugs that users browsed, and the pharmacies where users sought to fill prescriptions—with Google, Facebook, and around twenty other Internet-based companies. A few days later, GoodRx released a statement saying that it had made changes to prevent user search data on medical conditions and pharmaceuticals from being shared with Facebook. In March 2020, GoodRx stopped sending data about user prescriptions to Facebook. On February 1, 2023, the Federal Trade Commission fined GoodRx US$1.5 million for violations of the Breach Notification Rule and the Federal Trade Commission Act for allegedly failing to obtain specific, informed, and unambiguous consent from users before disclosing health-related information to Facebook and Google. In November 2024, independent pharmacies filed at least three class action lawsuits against GoodRx and major pharmacy benefit managers. The cases, brought by independent pharmacies in California, Michigan, Pennsylvania, and Rhode Island, allege that GoodRx and the PBMs collaborated to suppress reimbursements for generic prescription drugs. They allege that agreements using GoodRx’s software suppressed reimbursements for generic drugs and violated the Sherman Antitrust Act. The suits claim the practices amount to price fixing which harms small pharmacies while benefiting PBMs and their affiliates. GoodRx settled both the 2023 FTC action and the 2025 class action lawsuit without admitting wrongdoing.
Read more →
Clipmap

In computer graphics, clipmapping is a method of clipping a mipmap to a subset of data pertinent to the geometry being displayed. This is useful for loading as little data as possible when memory is limited, such as on a graphics processing unit. The technique is used for LODing in NVIDIA’s implementation of voxel cone tracing. The high-resolution levels of the mipmapped scene representation are clipped to a region near the camera, while lower resolution levels are clipped further away. == MegaTexture == MegaTexture is a clipmap implementation developed by id Software. It was introduced in their id Tech 4 engine and also appeared in id Tech 5 and id Tech 6 before being removed in id Tech 7. MegaTexture is a texture allocation technique that uses a single, extremely large texture rather than repeating multiple smaller textures. It is also featured in Splash Damage's game Enemy Territory: Quake Wars, and was developed by id Software former technical director John Carmack. MegaTexture employs a single large texture space for static terrain. The texture is stored on removable media or a computer's hard drive and streamed as needed, allowing large amounts of detail and variation over a large area with comparatively little RAM usage. Depending on the pixel resolution per square meter, covering a large area could require several gigabytes of memory. However, RAM is also filled by the rest of the game and the underlying operating system, limiting the amount available for texturing. As the player moves around the game, different sections of the MegaTexture are loaded into memory. They are then scaled to the correct size and applied to the 3D models of the terrain. Id has presented a more advanced technique that builds upon the MegaTexture idea and virtualizes both the geometry and the textures to obtain unique geometry down to the equivalent of the texel: the sparse voxel octree (SVO). It works by raycasting the geometry represented by voxels (instead of triangles) stored in an octree. The goal is to stream parts of the octree into video memory, going further down along the tree for nearby objects to give them more details, and to use higher level, larger voxels for farther objects, which give an automatic level of detail (LOD) system for both geometry and textures at the same time. The geometric detail that can be obtained using this method is nearly infinite, which removes the need for faking 3-dimensional details with techniques such as normal mapping. Despite that most voxel rendering tests use very large amounts of memory (up to several GB), Jon Olick of id Software claimed the technology is able to compress such SVO to 1.15 bits per voxel of position data. == Virtual texturing == Unlike clipmaps, which clip each mip level around a viewpoint-dependent clipcenter and therefore work best for terrain, virtual texturing preprocesses texture data into equally sized tiles that can be streamed for arbitrary textured geometry. Rage, powered by the id Tech 5 engine, uses a more advanced technique called virtual texturing. Textures can measure up to 128000×128000 pixels and are also used for in-game models and sprites, etc. and not just the terrain. Wolfenstein: The New Order and the 2016 version of Doom also use these. Carmageddon: Reincarnation also uses virtual texturing, though unlike id's virtual texturing system, which is designed for unique texture-mapping everywhere, their system is designed to use storage space sparingly while still offering good blend of texture variation and resolution.
Read more →
Standard test image

A standard test image is a digital image file used across different institutions to test image processing and image compression algorithms. By using the same standard test images, different labs are able to compare results, both visually and quantitatively. The images are in many cases chosen to represent natural or typical images that a class of processing techniques would need to deal with. Other test images are chosen because they present a range of challenges to image reconstruction algorithms, such as the reproduction of fine detail and textures, sharp transitions and edges, and uniform regions. == Historical origins == Test images as transmission system calibration material probably date back to the original Paris to Lyon pantelegraph link. Analogue fax equipment (and photographic equipment for the printing trade) were the largest user groups of the standardized image for calibration technology until the coming of television and digital image transmission systems. == Common test image resolutions == The standard resolution of the images is usually 512×512 or 720×576. Most of these images are available as TIFF files from the University of Southern California's Signal and Image Processing Institute. Kodak has released 768×512 images, available as PNGs, that was originally on Photo CD with higher resolution, that are widely used for comparing image compression techniques.
Read more →
Halloween Problem

In computing, the Halloween Problem refers to a phenomenon in databases in which an update operation causes a change in the physical location of a row, potentially allowing the row to be visited again later in the same update operation. This could even cause an infinite loop in some cases where updates continually place the updated record ahead of the scan performing the update operation. The potential for this database error was first discovered by Don Chamberlin, Pat Selinger, and Morton Astrahan in the mid-1970s, on Halloween day, while working on query optimization. They wrote a SQL query supposed to give a ten percent raise to every employee who earned less than $25,000. This query would run successfully, with no errors, but when finished all the employees in the database earned at least $25,000, because it kept giving them a raise until they reached that level. The expectation was that the query would iterate over each of the employee records with a salary less than $25,000 precisely once. In fact, because even updated records were visible to the query execution engine and so continued to match the query's criteria, salary records were matching multiple times and each time being given a 10% raise until they were all greater than $25,000. Contrary to what some believe, the name is not descriptive of the nature of the problem but rather was given due to the day it was discovered on. As recounted by Don Chamberlin: Pat and Morton discovered this problem on Halloween... I remember they came into my office and said, "Chamberlin, look at this. We have to make sure that when the optimizer is making a plan for processing an update, it doesn't use an index that is based on the field that is being updated. How are we going to do that?" It happened to be on a Friday, and we said, "Listen, we are not going to be able to solve this problem this afternoon. Let's just give it a name. We'll call it the Halloween Problem and we'll work on it next week." And it turns out it has been called that ever since.
Read more →
Comparison of operating systems

These tables provide a comparison of operating systems, of computer devices, as listing general and technical information for a number of widely used and currently available PC or handheld (including smartphone and tablet computer) operating systems. The article "Usage share of operating systems" provides a broader, and more general, comparison of operating systems that includes servers, mainframes and supercomputers. Because of the large number and variety of available Linux distributions, they are all grouped under a single entry; see comparison of Linux distributions for a detailed comparison. There is also a variety of BSD and DOS operating systems, covered in comparison of BSD operating systems and comparison of DOS operating systems. == Nomenclature == The nomenclature for operating systems varies among providers and sometimes within providers. For purposes of this article the terms used are; kernel In some operating systems, the OS is split into a low level region called the kernel and higher level code that relies on the kernel. Typically the kernel implements processes but its code does not run as part of a process. hybrid kernel monolithic kernel Nucleus In some operating systems there is OS code permanently present in a contiguous region of memory addressable by unprivileged code; in IBM systems this is typically referred to as the nucleus. The nucleus typically contains both code that requires special privileges and code that can run in an unprivileged state. Typically some code in the nucleus runs in the context of a dispatching unit, e.g., address space, process, task, thread, while other code runs independent of any dispatching unit. In contemporary operating systems unprivileged applications cannot alter the nucleus. License and pricing policies vary widely among different systems. Among others, the tables below use the following terms: BSD BSD licenses are a family of permissive free software licenses, imposing minimal restrictions on the use and distribution of covered software. bundled The fee is included in the price of the hardware == General information == == Technical information == == Security == == Commands == For POSIX compliant (or partly compliant) systems like FreeBSD, Linux, macOS or Solaris, the basic commands are the same because they are standardized. NOTE: Linux systems may vary by distribution which specific program, or even 'command' is called, via the POSIX alias function. For example, if you wanted to use the DOS dir to give you a directory listing with one detailed file listing per line you could use alias dir='ls -lahF' (e.g. in a session configuration file).
Read more →