The Intel Management Engine (ME), also known as the Intel Manageability Engine, is an autonomous subsystem that has been incorporated in virtually all of Intel's processor chipsets since 2008. It is located in the Platform Controller Hub of modern Intel motherboards. The Intel Management Engine always runs as long as the motherboard is receiving power, even when the computer is turned off. This issue can be mitigated with the deployment of a hardware device which is able to disconnect all connections to mains power as well as all internal forms of energy storage. The Electronic Frontier Foundation and some security researchers have voiced concern that the Management Engine is a backdoor. Intel's main competitor, AMD, has incorporated the equivalent AMD Secure Technology (formally called Platform Security Processor) in virtually all of its post-2013 CPUs. == Difference from Intel AMT == The Management Engine is often confused with Intel AMT (Intel Active Management Technology). AMT runs on the ME, but is only available on processors with vPro. AMT gives device owners remote administration of their computer, such as powering it on or off, and reinstalling the operating system. However, the ME itself has been built into all Intel chipsets since 2008, not only those with AMT. While AMT can be unprovisioned by the owner, there is no official, documented way to disable the ME. == Design == The subsystem primarily consists of proprietary firmware running on a separate microprocessor that performs tasks during boot-up, while the computer is running, and while it is asleep. As long as the chipset or SoC is supplied with power (via battery or power supply), it continues to run even when the system is turned off. Intel claims the ME is required to provide full performance. Its exact workings are largely undocumented and its code is obfuscated using confidential Huffman tables stored directly in hardware, so the firmware does not contain the information necessary to decode its contents. === Hardware === Starting with ME 11 (introduced in Skylake CPUs), it is based on the Intel Quark x86-based 32-bit CPU and runs the MINIX 3 operating system. The ME firmware is stored in a partition of the SPI BIOS Flash, using the Embedded Flash File System (EFFS). Previous versions were based on an ARC core, with the Management Engine running the ThreadX RTOS. Versions 1.x to 5.x of the ME used the ARCTangent-A4 (32-bit only instructions) whereas versions 6.x to 8.x used the newer ARCompact (mixed 32- and 16-bit instruction set architecture). Starting with ME 7.1, the ARC processor could also execute signed Java applets. The ME has its own MAC and IP address for the out-of-band management interface, with direct access to the Ethernet controller; one portion of the Ethernet traffic is diverted to the ME even before reaching the host's operating system, for what support exists in various Ethernet controllers, exported and made configurable via Management Component Transport Protocol (MCTP). The ME also communicates with the host via PCI interface. Under Linux, communication between the host and the ME is done via /dev/mei or /dev/mei0. Until the release of Nehalem processors, the ME was usually embedded into the motherboard's northbridge, following the Memory Controller Hub (MCH) layout. With the newer Intel architectures (Intel 5 Series onwards), the ME is integrated into the Platform Controller Hub (PCH). === Firmware === By Intel's current terminology as of 2017, ME is one of several firmware sets for the Converged Security and Manageability Engine (CSME). Prior to AMT version 11, CSME was called Intel Management Engine BIOS Extension (Intel MEBx). Management Engine (ME) – mainstream chipsets Server Platform Services (SPS) – server chipsets and SoCs Trusted Execution Engine (TXE) – tablet/embedded/low power It was also found that the ME firmware version 11 runs MINIX 3. Management of the ME modules for provisioning inside the UEFI is done via a tool called Intel Flash Image Tool (FITC). ==== Modules ==== Active Management Technology (AMT) Intel Boot Guard (IBG) and Secure Boot Quiet System Technology (QST), formerly known as Advanced Fan Speed Control (AFSC), which provides support for acoustically optimized fan speed control, and monitoring of temperature, voltage, current and fan speed sensors that are provided in the chipset, CPU and other devices present on the motherboard. Communication with the QST firmware subsystem is documented and available through the official software development kit (SDK). Protected Audio Video Path, enforces HDCP Intel Anti-Theft Technology (AT), discontinued in 2015 Serial over LAN (SOL) Intel Platform Trust Technology (PTT), a firmware-based Trusted Platform Module (TPM) Near Field Communication, a middleware for NFC readers and vendors to access NFC cards and provide secure element access, found in later MEI versions. == The intricacies of working with Intel ME == It should also be noted that the ME region requires special cleaning and subsequent initialisation, for example, after replacing the platform hub on the motherboard. Usually, this requires an SPI programmer. There are known successful cases of this operation being performed. == Security vulnerabilities == Several weaknesses have been found in the ME. On May 1, 2017, Intel confirmed a Remote Elevation of Privilege bug (SA-00075) in its Management Technology. Every Intel platform with provisioned Intel Standard Manageability, Active Management Technology, or Small Business Technology, from Nehalem in 2008 to Kaby Lake in 2017 has a remotely exploitable security hole in the ME. Several ways to disable the ME without authorization that could allow ME's functions to be sabotaged have been found. Additional major security flaws in the ME affecting a very large number of computers incorporating ME, Trusted Execution Engine (TXE), and Server Platform Services (SPS) firmware, from Skylake in 2015 to Coffee Lake in 2017, were confirmed by Intel on November 20, 2017 (SA-00086). Unlike SA-00075, this bug is even present if AMT is absent, not provisioned or if the ME was "disabled" by any of the known unofficial methods. In July 2018, another set of vulnerabilities was disclosed (SA-00112). In September 2018, yet another vulnerability was published (SA-00125). === Ring −3 rootkit === A ring −3 rootkit was demonstrated by Invisible Things Lab for the Q35 chipset; it does not work for the later Q45 chipset as Intel implemented additional protections. The exploit worked by remapping the normally protected memory region (top 16 MB of RAM) reserved for the ME. The ME rootkit could be installed regardless of whether the AMT is present or enabled on the system, as the chipset always contains the ARC ME coprocessor. (The "−3" designation was chosen because the ME coprocessor works even when the system is in the S3 state. Thus, it was considered a layer below the System Management Mode rootkits.) For the vulnerable Q35 chipset, a keystroke logger ME-based rootkit was demonstrated by Patrick Stewin. === Zero-touch provisioning === Another security evaluation by Vassilios Ververis showed serious weaknesses in the GM45 chipset implementation. In particular, it criticized AMT for transmitting unencrypted passwords in the SMB provisioning mode when the IDE redirection and Serial over LAN features are used. It also found that the "zero touch" provisioning mode (ZTC) is still enabled even when the AMT appears to be disabled in BIOS. For about 60 euros, Ververis purchased from GoDaddy a certificate that is accepted by the ME firmware and allows remote "zero touch" provisioning of (possibly unsuspecting) machines, which broadcast their HELLO packets to would-be configuration servers. === SA-00075 (a.k.a. Silent Bob is Silent) === In May 2017, Intel confirmed that many computers with AMT have had an unpatched critical privilege escalation vulnerability (CVE-2017-5689). The vulnerability was nicknamed "Silent Bob is Silent" by the researchers who had reported it to Intel. It affects numerous laptops, desktops and servers sold by Dell, Fujitsu, Hewlett-Packard (later Hewlett Packard Enterprise and HP Inc.), Intel, Lenovo, and possibly others. Those researchers claimed that the bug affects systems made in 2010 or later. Other reports claimed the bug also affects systems made as long ago as 2008. The vulnerability was described as giving remote attackers: "full control of affected machines, including the ability to read and modify everything. It can be used to install persistent malware (possibly in firmware), and read and modify any data." === PLATINUM === In June 2017, the PLATINUM cybercrime group became notable for exploiting the serial over LAN (SOL) capabilities of AMT to perform data exfiltration of stolen documents. SOL is disabled by default and must be enabled to exploit this vulnerability. === SA-00086 === Some months after the previous bugs, and subsequent warnings from the EFF, securi
Ampere Computing
Ampere Computing LLC is an American fabless semiconductor company that designs ARM-based central processing units (CPUs) with high core counts for use in cloud computing and data center environments. Founded in 2017 by former Intel president Renée James, the company is headquartered in Santa Clara, California, and operates as an independent subsidiary of SoftBank Group since November 2025. == History == Ampere Computing was founded in fall 2017 by Renée James, ex-President of Intel, with funding from The Carlyle Group. James acquired a team from MACOM Technology Solutions (formerly AppliedMicro) in addition to several industry hires to start the company. Ampere Computing is an ARM architecture licensee and develops its own server microprocessors. Ampere fabricates its products at TSMC. In April 2019, Ampere announced its second major investment round, including investment from Arm Holdings and Oracle Corporation. In June 2019, Nvidia announced a partnership with Ampere to bring support for Compute Unified Device Architecture (CUDA). In November 2019, Nvidia announced a reference design platform for graphics processing unit (GPU)-accelerated ARM-based servers including Ampere. In the first half of 2020, Ampere announced Ampere Altra, an 80-core processor, and Ampere Altra Max, a 128-core processor, without the use of simultaneous multithreading. In March 2020, the company announced a partnership with Oracle. In September 2020, Oracle said it would launch bare-metal and virtual machine instances in early 2021 based on Ampere Altra. In November 2020, Ampere was named one of the top 10 hottest semiconductor startups by CRN. In May 2021, the company announced a partnership with Microsoft. In April 2022, Ampere said that it had filed a confidential prospectus with the U.S. Securities and Exchange Commission, signaling its intent to go public. In June 2022, HPE announced their Gen11 ProLiant system would use Ampere Altra and Ampere Altra Max Cloud Native Processors. In July 2022, Google announced T2A instances using Ampere Altra in the Google cloud and in August 2022 Microsoft announced their instances of Ampere running in Azure. On March 19, 2025, investment holding company SoftBank Group announced it will acquire Ampere Computing for $6.5 billion. The deal finalized in November 2025, with Ampere remaining as an independent subsidiary with its headquarters in Santa Clara, California. == Products == Ampere develops ARM-based computer processors and CPU cores under their Altra brands. These are used in databases, media encoding, web services, network acceleration, mobile gaming, AI inference processing, and other applications and programs that need to scale. On February 5, 2018, Ampere announced the eMAG 8180 featuring 32x Skylark cores fabricated on TSMC's 16FF+ process. It supports a turbo of up to 3.3 GHz with a TDP of 125 W, 8ch 64-bit DDR4, up to 1 TB DDR4 per socket, and 42x PCIe 3.0 Lanes. The Skylark cores were based on AppliedMicro's X-Gene 3. Packet offers servers with the eMAG 8180 and 128 GB DRAM, 480 GB SSD, and 2x 10 Gbit/s networking. On September 19, 2018, Ampere announced the availability of a version featuring 16x Skylark cores. === 2020 === On March 3, 2020, Ampere announced the Ampere Altra featuring 80 cores fabricated on TSMC's N7 process for hyperscale computing. It was the first server-grade processor to include 80 cores and the Q80-30 conserves power by running at 161 W in use. The cores are semi-custom Arm Neoverse N1 cores with Ampere modifications. It supports a frequency of up to 3.3 GHz with TDP of 250 W, 8ch 72-bit DDR4, up to 4 TB DDR4-3200 per socket, 128x PCIe 4.0 Lanes, 1 MB L2 per core and 32 MB SLC. Ampere also announced their roadmap with Ampere Altra Max (2021) in development and AmpereOne (2022) defined. === 2021 === The 128-core Altra Max was released in 2021 and targeted hyperscale cloud providers. It uses the same server socket and platforms as Ampere Altra, and both products have one thread per core. The Altra Max CPUs provide 128 Arm v8.2+ cores per chip and run up to 3.0 GHz. They also support eight channels of DDR4-3200 memory and 128 lanes of PCIe Gen4. Also in 2021, Oracle launched its Oracle Cloud Infrastructure (OCI) using Ampere Altra processors. === 2022 === In February 2022, Ampere and Rigetti Computing announced a strategic partnership to create hybrid quantum-classical computers. The companies will combine Ampere's Altra Max CPUs with Rigetti's Quantum Processing Units (QPU) in cloud-based High-Performance Computing (HPC) environments. In April, Microsoft previewed its Azure Virtual Machines running on the Ampere Altra. The VMs run scale-out workloads, web servers, application servers, open source databases, cloud native .NET applications, Java applications, gaming servers, media servers, and other processes. In May, Ampere announced the sampling of AmpereOne CPUs, 5 nanometer chips based on its in-house Ampere-developed core. AmpereOne will add support for DDR5 main memory and PCIe Gen5 peripherals. On June 28, 2022, HPE became first tier-one server provider to offer compute with optimized cloud-native silicon for service providers and enterprises embracing cloud-native development with new line of HPE ProLiant RL Gen11 servers, using Ampere® Altra® and Ampere® Altra® Max processors, delivering high performance and power efficiency. === 2023 === During April 2023, Ampere released the Altra developer's kit, an IoT Prototype Kit based on Ampere Altra, aimed at cloud developers, available in 32-core, 64-core, and 80-core formats. === 2024 === In May 2024, Ampere updated its AmpereOne roadmap to 256 cores and announced a joint effort with Qualcomm on CPUs and accelerators. == Customers == Ampere's customers include Microsoft Azure, Tencent Cloud, Oracle, ByteDance, Hewlett Packard Enterprise (HPE), Cloudflare, Equinix, Kingsoft Cloud, Meituan, Scaleway, UCloud, Foxconn Industrial Internet, Gigabyte, Inspur, Cruise, Hetzner, Project Ronin, Wiwynn and Google Cloud Platform Cruise uses an Ampere Altra variant for its autonomous driving unit. The CPU was selected because of its throughput and low power consumption. In 2021, Oracle, Microsoft, Tencent, and ByteDance committed to using Ampere's customized chips, first announced in May. In April 2022, Microsoft previewed Ampere Altra processors in its new Azure D-and E- series virtual machines. The Dpsv5 series is built for Linux enterprise application types, and the Epsv5 series is for memory-intensive Linux workloads. They provide up to 64 vCPUs, include VM sizes with 2GiB, 4GiB, and 8GiB per vCPU memory configurations, up to 40 Gbit/s networking, and high-performance local SSD storage. In 2022, Microsoft's Ampere Altra-based Azure servers became the first cloud solution provider server to be Arm SystemReady SR certified. The Azure VMs, powered by Altra processors, were also the first to be SystemReady Virtual Environment standard certified. SystemReady defines a set of firmware and hardware standards as a baseline for system development for software developers, original equipment vendors, and chipmakers.
Computer-automated design
Design Automation usually refers to electronic design automation, or Design Automation which is a Product Configurator. Extending Computer-Aided Design (CAD), automated design and Computer-Automated Design (CAutoD) are more concerned with a broader range of applications, such as automotive engineering, civil engineering, composite material design, control engineering, dynamic system identification and optimization, financial systems, industrial equipment, mechatronic systems, steel construction, structural optimisation, and the invention of novel systems. The concept of CAutoD perhaps first appeared in 1963, in the IBM Journal of Research and Development, where a computer program was written. to search for logic circuits having certain constraints on hardware design to evaluate these logics in terms of their discriminating ability over samples of the character set they are expected to recognize. More recently, traditional CAD simulation is seen to be transformed to CAutoD by biologically-inspired machine learning, including heuristic search techniques such as evolutionary computation, and swarm intelligence algorithms. == Guiding designs by performance improvements == To meet the ever-growing demand of quality and competitiveness, iterative physical prototyping is now often replaced by 'digital prototyping' of a 'good design', which aims to meet multiple objectives such as maximised output, energy efficiency, highest speed and cost-effectiveness. The design problem concerns both finding the best design within a known range (i.e., through 'learning' or 'optimisation') and finding a new and better design beyond the existing ones (i.e., through creation and invention). This is equivalent to a search problem in an almost certainly, multidimensional (multivariate), multi-modal space with a single (or weighted) objective or multiple objectives. == Normalized objective function: cost vs. fitness == Using single-objective CAutoD as an example, if the objective function, either as a cost function J ∈ [ 0 , ∞ ) {\displaystyle J\in [0,\infty )} , or inversely, as a fitness function f ∈ ( 0 , 1 ] {\displaystyle f\in (0,1]} , where f = J 1 + J {\displaystyle f={\tfrac {J}{1+J}}} , is differentiable under practical constraints in the multidimensional space, the design problem may be solved analytically. Finding the parameter sets that result in a zero first-order derivative and that satisfy the second-order derivative conditions would reveal all local optima. Then comparing the values of the performance index of all the local optima, together with those of all boundary parameter sets, would lead to the global optimum, whose corresponding 'parameter' set will thus represent the best design. However, in practice, the optimization usually involves multiple objectives and the matters involving derivatives are a lot more complex. == Dealing with practical objectives == In practice, the objective value may be noisy or even non-numerical, and hence its gradient information may be unreliable or unavailable. This is particularly true when the problem is multi-objective. At present, many designs and refinements are mainly made through a manual trial-and-error process with the help of a CAD simulation package. Usually, such a posteriori learning or adjustments need to be repeated many times until a ‘satisfactory’ or ‘optimal’ design emerges. == Exhaustive search == In theory, this adjustment process can be automated by computerised search, such as exhaustive search. As this is an exponential algorithm, it may not deliver solutions in practice within a limited period of time. == Search in polynomial time == One approach to virtual engineering and automated design is evolutionary computation such as evolutionary algorithms. === Evolutionary algorithms === To reduce the search time, the biologically-inspired evolutionary algorithm (EA) can be used instead, which is a (non-deterministic) polynomial algorithm. The EA based multi-objective "search team" can be interfaced with an existing CAD simulation package in a batch mode. The EA encodes the design parameters (encoding being necessary if some parameters are non-numerical) to refine multiple candidates through parallel and interactive search. In the search process, 'selection' is performed using 'survival of the fittest' a posteriori learning. To obtain the next 'generation' of possible solutions, some parameter values are exchanged between two candidates (by an operation called 'crossover') and new values introduced (by an operation called 'mutation'). This way, the evolutionary technique makes use of past trial information in a similarly intelligent manner to the human designer. The EA based optimal designs can start from the designer's existing design database, or from an initial generation of candidate designs obtained randomly. A number of finely evolved top-performing candidates will represent several automatically optimized digital prototypes. There are websites that demonstrate interactive evolutionary algorithms for design. allows you to evolve 3D objects online and have them 3D printed. allows you to do the same for 2D images.
Orion's Arm
The Orion's Arm Universe Project (OA) is a multi-authored online hard science fiction world-building project, first established in 2000 by M. Alan Kazlev, Donna Malcolm Hirsekorn, Bernd Helfert and Anders Sandberg and further co-authored by many people since. Anyone can contribute articles, stories, artwork, or music to the website. The first published Orion's Arm book, a collection of five novellas set within the OA universe, called Against a Diamond Sky, was released in September 2009. == Canon == The fictional setting of Orion's Arm takes place about 10,000 years in the future, where an interstellar civilization spread across thousands of light-years, with inhabited planets and space habitats. Its inhabitants range from humans to extensively modified human beings, including superhumans with advanced augmentations and internal AI systems, while most people exist as softwares. Engineered wormholes are used for interstellar travel and transport, although not for time travel. The setting also includes several alien civilizations and evidence of more advanced alien societies in the past. At its highest levels, directed human evolution has produced vast godlike beings linked across interstellar distances, capable of understanding and creating technologies beyond ordinary minds. == Reception == Orion's Arm has been reviewed in the role-playing magazine Knights of the Dinner Table, as well as on Boing Boing by transhumanist science fiction author Cory Doctorow. References to the Encyclopaedia Galactica have been made in a book on overcoming Librarian stereotypes. The Orion's Arm website has also been recommended in a children's teaching guide.
Distributed artificial intelligence
Distributed Artificial Intelligence (DAI) (also called Decentralized Artificial Intelligence) is a melding of artificial intelligence with distributed computing. From artificial intelligence comes the theory and technology for constructing or analyzing an intelligent system. But where artificial intelligence uses psychology as a source of ideas, inspiration, and metaphor, DAI uses sociology, economics, and management science for inspiration. Where the focus of artificial intelligence is on the individual, the focus of DAI is on the group. Distributed computing provides the computational substrate on which this group focus can occur. Using techniques from artificial intelligence, communication theory, control theory, and interaction theory, it produces a cooperative solution to problems by a decentralized group of computational entities (agents). DAI is closely related to and a predecessor of the field of multi-agent systems. They are distinguished generally by multi-agent systems being open, where the entities might arise from different interests and have individual goals, and distributed artificial-intelligence systems, where the entities have common goals. There are numerous applications and tools. == Definition == Distributed Artificial Intelligence (DAI) is an approach to solving complex learning, planning, and decision-making problems. It is embarrassingly parallel, thus able to exploit large scale computation and spatial distribution of computing resources. These properties allow it to solve problems that require the processing of very large data sets. DAI systems consist of autonomous learning processing nodes (agents), that are distributed, often at a very large scale. DAI nodes can act independently, and partial solutions are integrated by communication between nodes, often asynchronously. By virtue of their scale, DAI systems are robust and elastic, and by necessity, loosely coupled. Furthermore, DAI systems are built to be adaptive to changes in the problem definition or underlying data sets due to the scale and difficulty in redeployment. DAI systems do not require all the relevant data to be aggregated in a single location, in contrast to monolithic or centralized Artificial Intelligence systems, which have tightly coupled and geographically close processing nodes. Therefore, DAI systems often operate on sub-samples or hashed impressions of very large datasets. In addition, the source dataset may change or be updated during the course of the execution of a DAI system. == Development == In 1975 distributed artificial intelligence emerged as a subfield of artificial intelligence that dealt with interactions of intelligent agents. As a scientific discipline, it progressed through a series of workshops in the USA (International Workshop on Distributed Artificial Intelligence, held in 13 editions from 1978 - 1994), Europe (Workshop on Modelling Autonomous Agents in a Multi-Agent World https://link.springer.com/conference/maamaw), and Asia (Multi-Agent and Cooperative Computation Workshop (MACC) https://sites.google.com/view/sig-macc/macc-workshop?authuser=0). Distributed artificial intelligence systems were conceived as a group of intelligent entities, called agents, that interacted by cooperation, by coexistence, or by competition. DAI is categorized into multi-agent systems and distributed problem solving. In multi-agent systems the main focus is how agents coordinate their knowledge and activities. For distributed problem solving the major focus is how the problem is decomposed and the solutions are synthesized. == Goals == The objectives of Distributed Artificial Intelligence are to solve the reasoning, planning, learning and perception problems of artificial intelligence, especially if they require large data, by distributing the problem to autonomous processing nodes (agents). To reach the objective, DAI requires: A distributed system with robust and elastic computation on unreliable and failing resources that are loosely coupled Coordination of the actions and communication of the nodes Subsamples of large data sets and online machine learning There are many reasons for wanting to distribute intelligence or cope with multi-agent systems. Mainstream problems in DAI research include the following: Parallel problem solving: mainly deals with how classic artificial intelligence concepts can be modified, so that multiprocessor systems and clusters of computers can be used to speed up calculation. Distributed problem solving (DPS): the concept of agent, autonomous entities that can communicate with each other, was developed to serve as an abstraction for developing DPS systems. See below for further details. Multi-Agent Based Simulation (MABS): a branch of DAI that builds the foundation for simulations that need to analyze not only phenomena at macro level but also at micro level, as it is in many social simulation scenarios. == Approaches == Two types of DAI has emerged: In Multi-agent systems agents coordinate their knowledge and activities and reason about the processes of coordination. Agents are physical or virtual entities that can act, perceive their environment, and communicate with other agents. An agent is autonomous and has skills to achieve goals. The agents change the state of their environment by their actions. There are a number of different coordination techniques. In distributed problem solving the work is divided among nodes and the knowledge is shared. The main concerns are task decomposition and synthesis of the knowledge and solutions. DAI can apply a bottom-up approach to AI, similar to the subsumption architecture as well as the traditional top-down approach of AI. In addition, DAI can also be a vehicle for emergence. === Challenges === The challenges in Distributed AI are: How to carry out communication and interaction of agents and which communication language or protocols should be used. How to ensure the coherency of agents. How to synthesise the results among 'intelligent agents' group by formulation, description, decomposition and allocation. == Applications and tools == Areas where DAI have been applied are: Electronic commerce, e.g. for trading strategies the DAI system learns financial trading rules from subsamples of very large samples of financial data Networks, e.g. in telecommunications the DAI system controls the cooperative resources in a WLAN network Routing, e.g. model vehicle flow in transport networks Scheduling, e.g. flow shop scheduling where the resource management entity ensures local optimization and cooperation for global and local consistency Search engines, e.g. in LLM federated search like Ithy where document retrieval and analysis are distributed to DAI agents before aggregation Multi-Agent systems, e.g. artificial life, the study of simulated life Electric power systems, e.g. Condition Monitoring Multi-Agent System (COMMAS) applied to transformer condition monitoring, and IntelliTEAM II Automatic Restoration System DAI integration in tools has included: ECStar is a distributed rule-based learning system. == Agents == === Systems: Agents and multi-agents === Notion of Agents: Agents can be described as distinct entities with standard boundaries and interfaces designed for problem solving. Notion of Multi-Agents: Multi-Agent system is defined as a network of agents which are loosely coupled working as a single entity like society for problem solving that an individual agent cannot solve. === Software agents === The key concept used in DPS and MABS is the abstraction called software agents. An agent is a virtual (or physical) autonomous entity that has an understanding of its environment and acts upon it. An agent is usually able to communicate with other agents in the same system to achieve a common goal, that one agent alone could not achieve. This communication system uses an agent communication language. A first classification that is useful is to divide agents into: reactive agent – A reactive agent is not much more than an automaton that receives input, processes it and produces an output. deliberative agent – A deliberative agent in contrast should have an internal view of its environment and is able to follow its own plans. hybrid agent – A hybrid agent is a mixture of reactive and deliberative, that follows its own plans, but also sometimes directly reacts to external events without deliberation. Well-recognized agent architectures that describe how an agent is internally structured are: ASMO (emergence of distributed modules) BDI (Believe Desire Intention, a general architecture that describes how plans are made) InterRAP (A three-layer architecture, with a reactive, a deliberative and a social layer) PECS (Physics, Emotion, Cognition, Social, describes how those four parts influences the agents behavior). Soar (a rule-based approach)
Data commingling
Data commingling, in computer science, occurs when different items or kinds of data are stored in such a way that they become commonly accessible when they are supposed to remain separated. In cloud computing, this can occur where different customer data sits on the same server. Data that is commingled can present a security vulnerability. Data commingling can also occur due to high speed data transmission mixing. In this situation, data of one security level can inadvertently or purposely be mixed with data of a lower or higher security level on the same transmission portal. Portal vehicles can be wire, fiber optics, microwave or various radio frequency transmission portals. This commingling can cause breaches of security and become a source of legal issues to any entity, corporation or individual. Data commingling can also occur when personal computers and personal software programs are used for business, security, government, etc. uses. In the early formulation stages of entities, non-profit or profit corporations, LLC's, LLP's, etc., the creation and use of stand-alone computers and stand-alone networks, "absolutely unconnected" to involved individuals, is the easiest, and safest way to prevent Data Commingling.
Agent mining
Agent mining is a research field that combines two areas of computer science: multiagent systems and data mining. It explores how intelligent computer agents can work together to discover, analyze, and learn from large amounts of data more effectively than traditional methods. == Historical context == The interaction and the integration between multiagent systems and data mining have a long history. The very early work on agent mining focused on agent-based knowledge discovery, agent-based distributed data mining, and agent-based distributed machine learning, and using data mining to enhance agent intelligence. The International Workshop on Agents and Data Mining Interaction has been held for more than 10 times, co-located with the International Conference on Autonomous Agents and Multi-Agent Systems. Several proceedings are available from Springer Lecture Notes in Computer Science.