Distributed Artificial Intelligence (DAI) (also called Decentralized Artificial Intelligence) is a melding of artificial intelligence with distributed computing. From artificial intelligence comes the theory and technology for constructing or analyzing an intelligent system. But where artificial intelligence uses psychology as a source of ideas, inspiration, and metaphor, DAI uses sociology, economics, and management science for inspiration. Where the focus of artificial intelligence is on the individual, the focus of DAI is on the group. Distributed computing provides the computational substrate on which this group focus can occur. Using techniques from artificial intelligence, communication theory, control theory, and interaction theory, it produces a cooperative solution to problems by a decentralized group of computational entities (agents). DAI is closely related to and a predecessor of the field of multi-agent systems. They are distinguished generally by multi-agent systems being open, where the entities might arise from different interests and have individual goals, and distributed artificial-intelligence systems, where the entities have common goals. There are numerous applications and tools. == Definition == Distributed Artificial Intelligence (DAI) is an approach to solving complex learning, planning, and decision-making problems. It is embarrassingly parallel, thus able to exploit large scale computation and spatial distribution of computing resources. These properties allow it to solve problems that require the processing of very large data sets. DAI systems consist of autonomous learning processing nodes (agents), that are distributed, often at a very large scale. DAI nodes can act independently, and partial solutions are integrated by communication between nodes, often asynchronously. By virtue of their scale, DAI systems are robust and elastic, and by necessity, loosely coupled. Furthermore, DAI systems are built to be adaptive to changes in the problem definition or underlying data sets due to the scale and difficulty in redeployment. DAI systems do not require all the relevant data to be aggregated in a single location, in contrast to monolithic or centralized Artificial Intelligence systems, which have tightly coupled and geographically close processing nodes. Therefore, DAI systems often operate on sub-samples or hashed impressions of very large datasets. In addition, the source dataset may change or be updated during the course of the execution of a DAI system. == Development == In 1975 distributed artificial intelligence emerged as a subfield of artificial intelligence that dealt with interactions of intelligent agents. As a scientific discipline, it progressed through a series of workshops in the USA (International Workshop on Distributed Artificial Intelligence, held in 13 editions from 1978 - 1994), Europe (Workshop on Modelling Autonomous Agents in a Multi-Agent World https://link.springer.com/conference/maamaw), and Asia (Multi-Agent and Cooperative Computation Workshop (MACC) https://sites.google.com/view/sig-macc/macc-workshop?authuser=0). Distributed artificial intelligence systems were conceived as a group of intelligent entities, called agents, that interacted by cooperation, by coexistence, or by competition. DAI is categorized into multi-agent systems and distributed problem solving. In multi-agent systems the main focus is how agents coordinate their knowledge and activities. For distributed problem solving the major focus is how the problem is decomposed and the solutions are synthesized. == Goals == The objectives of Distributed Artificial Intelligence are to solve the reasoning, planning, learning and perception problems of artificial intelligence, especially if they require large data, by distributing the problem to autonomous processing nodes (agents). To reach the objective, DAI requires: A distributed system with robust and elastic computation on unreliable and failing resources that are loosely coupled Coordination of the actions and communication of the nodes Subsamples of large data sets and online machine learning There are many reasons for wanting to distribute intelligence or cope with multi-agent systems. Mainstream problems in DAI research include the following: Parallel problem solving: mainly deals with how classic artificial intelligence concepts can be modified, so that multiprocessor systems and clusters of computers can be used to speed up calculation. Distributed problem solving (DPS): the concept of agent, autonomous entities that can communicate with each other, was developed to serve as an abstraction for developing DPS systems. See below for further details. Multi-Agent Based Simulation (MABS): a branch of DAI that builds the foundation for simulations that need to analyze not only phenomena at macro level but also at micro level, as it is in many social simulation scenarios. == Approaches == Two types of DAI has emerged: In Multi-agent systems agents coordinate their knowledge and activities and reason about the processes of coordination. Agents are physical or virtual entities that can act, perceive their environment, and communicate with other agents. An agent is autonomous and has skills to achieve goals. The agents change the state of their environment by their actions. There are a number of different coordination techniques. In distributed problem solving the work is divided among nodes and the knowledge is shared. The main concerns are task decomposition and synthesis of the knowledge and solutions. DAI can apply a bottom-up approach to AI, similar to the subsumption architecture as well as the traditional top-down approach of AI. In addition, DAI can also be a vehicle for emergence. === Challenges === The challenges in Distributed AI are: How to carry out communication and interaction of agents and which communication language or protocols should be used. How to ensure the coherency of agents. How to synthesise the results among 'intelligent agents' group by formulation, description, decomposition and allocation. == Applications and tools == Areas where DAI have been applied are: Electronic commerce, e.g. for trading strategies the DAI system learns financial trading rules from subsamples of very large samples of financial data Networks, e.g. in telecommunications the DAI system controls the cooperative resources in a WLAN network Routing, e.g. model vehicle flow in transport networks Scheduling, e.g. flow shop scheduling where the resource management entity ensures local optimization and cooperation for global and local consistency Search engines, e.g. in LLM federated search like Ithy where document retrieval and analysis are distributed to DAI agents before aggregation Multi-Agent systems, e.g. artificial life, the study of simulated life Electric power systems, e.g. Condition Monitoring Multi-Agent System (COMMAS) applied to transformer condition monitoring, and IntelliTEAM II Automatic Restoration System DAI integration in tools has included: ECStar is a distributed rule-based learning system. == Agents == === Systems: Agents and multi-agents === Notion of Agents: Agents can be described as distinct entities with standard boundaries and interfaces designed for problem solving. Notion of Multi-Agents: Multi-Agent system is defined as a network of agents which are loosely coupled working as a single entity like society for problem solving that an individual agent cannot solve. === Software agents === The key concept used in DPS and MABS is the abstraction called software agents. An agent is a virtual (or physical) autonomous entity that has an understanding of its environment and acts upon it. An agent is usually able to communicate with other agents in the same system to achieve a common goal, that one agent alone could not achieve. This communication system uses an agent communication language. A first classification that is useful is to divide agents into: reactive agent – A reactive agent is not much more than an automaton that receives input, processes it and produces an output. deliberative agent – A deliberative agent in contrast should have an internal view of its environment and is able to follow its own plans. hybrid agent – A hybrid agent is a mixture of reactive and deliberative, that follows its own plans, but also sometimes directly reacts to external events without deliberation. Well-recognized agent architectures that describe how an agent is internally structured are: ASMO (emergence of distributed modules) BDI (Believe Desire Intention, a general architecture that describes how plans are made) InterRAP (A three-layer architecture, with a reactive, a deliberative and a social layer) PECS (Physics, Emotion, Cognition, Social, describes how those four parts influences the agents behavior). Soar (a rule-based approach)
Continuum robot
A continuum robot is a type of robot that is characterised by infinite degrees of freedom and number of joints. These characteristics allow continuum manipulators to adjust and modify their shape at any point along their length, granting them the possibility to work in confined spaces and complex environments where standard rigid-link robots cannot operate. In particular, we can define a continuum robot as an actuatable structure whose constitutive material forms curves with continuous tangent vectors. This is a fundamental definition that allows to distinguish between continuum robots and snake-arm robots or hyper-redundant manipulators: the presence of rigid links and joints allows them to only approximately perform curves with continuous tangent vectors. The design of continuum robots is bioinspired, as the intent is to resemble biological trunks, snakes and tentacles. Several concepts of continuum robots have been commercialised and can be found in many different domains of application, ranging from the medical field to undersea exploration. == Classification == Continuum robots can be categorised according to two main criteria: structure and actuation. === Structure === The main characteristic of the design of continuum robots is the presence of a continuously curving core structure, named backbone, whose shape can be actuated. The backbone must also be compliant, meaning that the backbone yields smoothly to external loads. According to the design principles chosen for the continuum manipulator, we can distinguish between: single-backbone: these continuum manipulators have one central elastic backbone through which actuation/transmission elements can run. multi-backbone: the structure of these continuum robots has two or more elastic elements (either rods or tubes) parallel to each other and constrained with one another in some way. concentric-tube: the backbone is made of concentric tubes that are free to rotate and translate between each other, depending on the actuation happening at the base of the robot. === Actuation === The actuation strategy of continuum manipulators can be distinguished between extrinsic or intrinsic actuation, depending on where the actuation happens: extrinsic actuation: the actuation happens outside the main structure of the robot and the forces are transmitted via mechanical transmission; among these techniques, there are cable/tendon driven actuators and multi-backbone strategies. intrinsic actuation: the actuation mechanism operates within the structure of the robot; these strategies include pneumatic or hydraulic chambers and the shape memory effect. The Actuated Flexible Manifold (AFM), introduced by Medina, Shapiro, and Shvalb (2016), models flexible grid-based robots that approximate smooth manifolds using discrete segments, each contributing one degree of freedom. Their work provides forward and inverse kinematics for planar and spatial configurations, bridging hyper-redundant and continuum robotics. == Advantages == The particular design of continuum robots offers several advantages with respect to rigid-link robots. First of all, as already said, continuum robots can more easily operate in environments that require a high level of dexterity, adaptability and flexibility. Moreover, the simplicity of their structure makes continuum robots more prone to miniaturisation. The rise of continuum robots has also paved the way for the development of soft continuum manipulators. These continuum manipulators are made of highly compliant materials that are flexible and can adapt and deform according to the surrounding environment. The "softness" of their material grants higher safety in human-robot interactions. == Disadvantages == The particular design of continuum robots also introduces many challenges. To properly and safely use continuum robots, it is crucial to have an accurate force and shape sensing system. Traditionally, this is done using cameras that are not suitable for some of the applications of continuum robots (e.g. minimally invasive surgery), or using electromagnetic sensors that are however disturbed by the presence of magnetic objects in the environment. To solve this issue, in the last years fiber-Bragg-grating sensors have been proposed as a possible alternative and have shown promising results. It is also necessary to notice that while the mechanical properties of rigid-link robots are fully understood, the comprehension of the behaviour and properties of continuum robots is still subject of study and debate. This poses new challenges in developing accurate models and control algorithms for this kind of robots. == Modelling == Creating an accurate model that can predict the shape of a continuum robot allows to properly control the robot's shape. There are three main approaches to model continuum robots: Cosserat rod theory: this approach is an exact solution to the static of a continuum robot, as it is not subject to any assumption. It solves a set of equilibrium equations between position, orientation, internal force and torque of the robot. This method requires to be solved numerically and it is therefore computationally expensive, due to its high complexity. Constant curvature: this technique assumes the backbone to be made of a series of mutually tangent sections that can be approximated as arcs with constant curvature. This approach is also known as piecewise constant-curvature. This assumption can be applied to the entire segment of the backbone or to its subsegments. This model has shown promising results, however it must be taken into account that the segment/subsegments of the backbone may not comply to the constant curvature assumption and therefore the model's behaviour may not entirely reflect the behaviour of the robot. Rigid-link model: this approach is based on the assumption that the continuum robot can be divided in small segments with rigid links. This is a strong assumption, since if the number of segments is too low, the model hardly behaves like the continuum robot, while increasing the number of segments means increasing the number of variables, and thus complexity. Despite this limitation, rigid-link modelling allows the use of the standard control techniques that are well known for rigid-link robots. It has been proven that this model can be coupled with shape and force sensing to mitigate its inaccuracy and can lead to promising results. == Sensing == To develop accurate control algorithms, it is necessary to complement the presented modelling techniques with real time shape sensing. The following options are currently available: Electromagnetic (EM) sensing: shape is reconstructed thanks to the mutual induction between a magnetic field generator and a magnetic field sensor. The most common external EM tracking system is the commercially available NDI Aurora: small sensors can be placed on the robot and their position is tracked in an external generated magnetic field. The validity of this method has been extensively assessed, however its performance is hindered by the limited workspace, whose dimension depends on the magnetic field. Another alternative is to embed the sensors internally in the continuum robot, combining magnetic sensors with Hall effect sensors: the magnetic field is measured at the level of the Hall effect sensors in order to estimate the deflection of the robot. However, it has been noticed that the higher the bending of the manipulator, the higher is the estimation error, due to crosstalk between sensors and magnets. Optical sensing: fiber Bragg grating sensors incorporated in an optical fiber can be embedded into the backbone of the continuum robot to estimate its shape; these sensors can only reflect a small range of the input light spectrum depending on their strain; therefore, by measuring the strain on each sensor it is possible to obtain the shape of the robot. This type of sensor is however expensive and is more prone to breaking in case of excessive strain, and this can happen in robots that can perform high deflections. == Control strategies == The control strategies can be distinguished in static and dynamic; the first one is based on the steady-state assumption, while the latter also considers the dynamic behaviour of the continuum robot. We can also differentiate between model-based controllers, that depend on a model of the robot, and model-free, that learn the robot's behaviour from data. Model-based static controllers: they rely on one of the modelling approaches presented above; once the model is defined, the kinematics must be inverted to obtain the desired actuator or configuration space variables. There are several ways to do this, like differential inverse kinematics, direct inversion or optimization. Model-free static controllers: these approaches learn directly, via machine learning techniques (e.g. regression methods and neural networks), the inverse kinematic or the direct kinematic representation of the con
Normal distributions transform
The normal distributions transform (NDT) is a point cloud registration algorithm introduced by Peter Biber and Wolfgang Straßer in 2003, while working at University of Tübingen. The algorithm registers two point clouds by first associating a piecewise normal distribution to the first point cloud, that gives the probability of sampling a point belonging to the cloud at a given spatial coordinate, and then finding a transform that maps the second point cloud to the first by maximising the likelihood of the second point cloud on such distribution as a function of the transform parameters. Originally introduced for 2D point cloud map matching in simultaneous localization and mapping (SLAM) and relative position tracking, the algorithm was extended to 3D point clouds and has wide applications in computer vision and robotics. NDT is very fast and accurate, making it suitable for application to large scale data, but it is also sensitive to initialisation, requiring a sufficiently accurate initial guess, and for this reason it is typically used in a coarse-to-fine alignment strategy. == Formulation == The NDT function associated to a point cloud is constructed by partitioning the space in regular cells. For each cell, it is possible to define the mean q = 1 n ∑ i x i {\displaystyle \textstyle \mathbf {q} ={\frac {1}{n}}\sum _{i}\mathbf {x_{i}} } and covariance S = 1 n ∑ i ( x i − q ) ( x i − q ) ⊤ {\displaystyle \textstyle \mathbf {S} ={\frac {1}{n}}\sum _{i}\left(\mathbf {x} _{i}-\mathbf {q} \right)\left(\mathbf {x} _{i}-\mathbf {q} \right)^{\top }} of the n {\displaystyle n} points of the cloud x 1 , … , x n {\displaystyle \mathbf {x} _{1},\dots ,\mathbf {x} _{n}} that fall within the cell. The probability density of sampling a point at a given spatial location x {\displaystyle \mathbf {x} } within the cell is then given by the normal distribution e − 1 2 ( x − q ) ⊤ S − 1 ( x − q ) {\displaystyle e^{-{\frac {1}{2}}\left(\mathbf {x} -\mathbf {q} \right)^{\top }\mathbf {S} ^{-1}\left(\mathbf {x} -\mathbf {q} \right)}} . Two point clouds can be mapped by a Euclidean transformation f {\displaystyle f} with rotation matrix R {\displaystyle \mathbf {R} } and translation vector t {\displaystyle \mathbf {t} } f R , t ( x ) = R x + t {\displaystyle f_{\mathbf {R} ,\mathbf {t} }(\mathbf {x} )=\mathbf {R} \mathbf {x} +\mathbf {t} } that maps from the second cloud to the first, parametrised by the rotation angles and translation components. The algorithm registers the two point clouds by optimising the parameters of the transformation that maps the second cloud to the first, with respect to a loss function based on the NDT of the first point cloud, solving the following problem arg min R , t { − ∑ i NDT ( f R , t ( x i ) ) } {\displaystyle \arg \min _{\mathbf {R} ,\mathbf {t} }\left\{-\sum _{i}\operatorname {NDT} \left(f_{\mathbf {R} ,\mathbf {t} }\left(\mathbf {x_{i}} \right)\right)\right\}} where the loss function represents the negated likelihood, obtained by applying the transformation to all points in the second cloud and summing the value of the NDT at each transformed point f R , t ( x ) {\displaystyle f_{\mathbf {R} ,\mathbf {t} }(\mathbf {x} )} . The loss is piecewise continuous and differentiable, and can be optimised with gradient-based methods (in the original formulation, the authors use Newton's method). In order to reduce the effect of cell discretisation, a technique consists of partitioning the space into multiple overlapping grids, shifted by half cell size along the spatial directions, and computing the likelihood at a given location as the sum of the NDTs induced by each grid.
Bottlenose (company)
Bottlenose.com, also known as Bottlenose, is an enterprise trend intelligence company that analyzes big data and business data to detect trends for brands. It helps Fortune 500 enterprises discover, and track emerging trends that affect their brands. The company uses natural language processing, sentiment analysis, statistical algorithms, data mining, and machine learning heuristics to determine trends, and has a search engine that gathers information from social networks. KPMG Capital has invested a "substantial amount" in the company. Bottlenose processed 72 billion messages per day, in real-time, from across social and broadcast media, as of December 2014. == History == The company is based in Los Angeles, CA. Bottlenose is a real-time trend intelligence tool that measures social media campaigns and trends. The company also provides a free version of its Sonar tool that shows real-time trends across social media. In October 2012, the company received $1 million of funding from ff Venture Capital and Prosper Capital. By 2014, the company raised about $7 million in funding. In December 2014, KPMG Capital announced further investment in the company. In February 2015, the company confirmed it had raised $13.4 million in Series B funding led by KPMG Capital. Bottlenose partnered with the nonprofit No Labels during the 2014 State of the Union Address to analyze Twitter conversations for bipartisanship. The company also partnered with media monitoring company Critical Mention to analyze broadcast analytics. The Bottlenose Nerve Center integrated with the Critical Mention API to analyze real-time trends in television and radio broadcasts. In June 2014, Bottlenose updated its trend detection product to Nerve Center 2.0. It creates a newsfeed to show changes in trends and sends alerts when trends occur. It also has "emotion detection," which will display the emotions associated with specific comments on trending topics. In 2016, Bottlenose released its Nerve Center 3.0 platform, which was designed to automate the work of data scientists and lower the cost of artificial intelligence for businesses.
BLOOM (language model)
The BigScience Large Open-science Open-access Multilingual Language Model (BLOOM) is an open-access large language model (LLM) released in 2022. It was created by a volunteer-driven research effort to provide a transparently-created alternative to proprietary AI models. With 176 billion parameters, BLOOM is a transformer-based autoregressive model designed to generate text in 46 natural languages and 13 programming languages. The model is distributed under the project's "Responsible AI License". == Development == BLOOM is the main outcome of the BigScience initiative, a one-year-long research workshop. The project was coordinated by Hugging Face using funding from the French government and involved several hundred volunteer researchers and engineers from academia and the private sector. The model was trained between March and July 2022 on the Jean Zay public supercomputer in France, managed by GENCI and IDRIS (CNRS). Unlike GPT-3, BLOOM was trained to be multilingual. The source code is released under the Apache 2.0 license. The model's parameters are released under BigScience's "Responsible AI License" (RAIL), which grants open access and reuse rights but with some usage restrictions. BLOOM was used in the chatbots BLOOMChat and HuggingChat due to its multilingual abilities. BLOOM's training corpus, named ROOTS, combines data extracted from the then-latest version of the web-based OSCAR corpus (38% of ROOTS) and newly collected data extracted from a manually selected and documented list of language data sources. In total, the model was trained on approximately 366 billion (1.6TB) tokens. It was developed using the open-source libraries DeepSpeed Megatron. BigScience then released xP3, a multilingual dataset for LLM supervised learning. It also released BLOOMZ, a variant of BLOOM fine-tuned on xP3 to follow instructions.
Cryptographic module
A cryptographic module is a component of a computer system that securely implements cryptographic algorithms, typically with some element of tamper resistance. NIST defines a cryptographic module as "The set of hardware, software, and/or firmware that implements security functions (including cryptographic algorithms), holds plaintext keys and uses them for performing cryptographic operations, and is contained within a cryptographic module boundary." Hardware security modules, including secure cryptoprocessors, are one way of implementing cryptographic modules. Standards for cryptographic modules include FIPS 140-3 and ISO/IEC 19790.
Latent semantic mapping
Latent semantic mapping (LSM) is a data-driven framework to model globally meaningful relationships implicit in large volumes of (often textual) data. It is a generalization of latent semantic analysis. In information retrieval, LSA enables retrieval on the basis of conceptual content, instead of merely matching words between queries and documents. LSM was derived from earlier work on latent semantic analysis. There are 3 main characteristics of latent semantic analysis: Discrete entities, usually in the form of words and documents, are mapped onto continuous vectors, the mapping involves a form of global correlation pattern, and dimensionality reduction is an important aspect of the analysis process. These constitute generic properties, and have been identified as potentially useful in a variety of different contexts. This usefulness has encouraged great interest in LSM. The intended product of latent semantic mapping, is a data-driven framework for modeling relationships in large volumes of data. Mac OS X v10.5 and later includes a framework implementing latent semantic mapping.