AI Content Used In Pragmata

AI Content Used In Pragmata — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

VACUUM

VACUUM is a set of normative guidance principles for achieving training and test dataset quality for structured datasets in data science and machine learning. The garbage-in, garbage out principle motivates a solution to the problem of data quality but does not offer a specific solution. Unlike the majority of the ad-hoc data quality assessment metrics often used by practitioners VACUUM specifies qualitative principles for data quality management and serves as a basis for defining more detailed quantitative metrics of data quality. VACUUM is an acronym that stands for: valid accurate consistent uniform unified model
Read more →
Super-resolution optical fluctuation imaging

Super-resolution optical fluctuation imaging (SOFI) is a post-processing method for the calculation of super-resolved images from recorded image time series that is based on the temporal correlations of independently fluctuating fluorescent emitters. SOFI has been developed for super-resolution of biological specimen that are labelled with independently fluctuating fluorescent emitters (organic dyes, fluorescent proteins). In comparison to other super-resolution microscopy techniques such as STORM or PALM that rely on single-molecule localization and hence only allow one active molecule per diffraction-limited area (DLA) and timepoint, SOFI does not necessitate a controlled photoswitching and/ or photoactivation as well as long imaging times. Nevertheless, it still requires fluorophores that are cycling through two distinguishable states, either real on-/off-states or states with different fluorescence intensities. In mathematical terms SOFI-imaging relies on the calculation of cumulants, for what two distinguishable ways exist. For one thing an image can be calculated via auto-cumulants that by definition only rely on the information of each pixel itself, and for another thing an improved method utilizes the information of different pixels via the calculation of cross-cumulants. Both methods can increase the final image resolution significantly although the cumulant calculation has its limitations. Actually SOFI is able to increase the resolution in all three dimensions. == Principle == Likewise to other super-resolution methods SOFI is based on recording an image time series on a CCD- or CMOS camera. In contrary to other methods the recorded time series can be substantially shorter, since a precise localization of emitters is not required and therefore a larger quantity of activated fluorophores per diffraction-limited area is allowed. The pixel values of a SOFI-image of the n-th order are calculated from the values of the pixel time series in the form of a n-th order cumulant, whereas the final value assigned to a pixel can be imagined as the integral over a correlation function. The finally assigned pixel value intensities are a measure of the brightness and correlation of the fluorescence signal. Mathematically, the n-th order cumulant is related to the n-th order correlation function, but exhibits some advantages concerning the resulting resolution of the image. Since in SOFI several emitters per DLA are allowed, the photon count at each pixel results from the superposition of the signals of all activated nearby emitters. The cumulant calculation now filters the signal and leaves only highly correlated fluctuations. This provides a contrast enhancement and therefore a background reduction for good measure. As it is implied in the figure on the left the fluorescence source distribution: ∑ k = 1 N δ ( r → − r → k ) ⋅ ε k ⋅ s k ( t ) {\displaystyle \sum _{k=1}^{N}\delta ({\vec {r}}-{\vec {r}}_{k})\cdot \varepsilon _{k}\cdot s_{k}(t)} is convolved with the system's point spread function (PSF) U(r). Hence the fluorescence signal at time t and position r → {\displaystyle {\vec {r}}} is given by F ( r → , t ) = ∑ k = 1 N U ( r → − r → k ) ⋅ ε k ⋅ s k ( t ) . {\displaystyle F({\vec {r}},t)=\sum _{k=1}^{N}U({\vec {r}}-{\vec {r}}_{k})\cdot \varepsilon _{k}\cdot s_{k}(t).} Within the above equations N is the amount of emitters, located at the positions r → k {\displaystyle {\vec {r}}_{k}} with a time-dependent molecular brightness ε k ⋅ s k {\displaystyle \varepsilon _{k}\cdot s_{k}} where ε k {\displaystyle \varepsilon _{k}} is a variable for the constant molecular brightness and s k ( t ) {\displaystyle s_{k}(t)} is a time-dependent fluctuation function. The molecular brightness is just the average fluorescence count-rate divided by the number of molecules within a specific region. For simplification it has to be assumed that the sample is in a stationary equilibrium and therefore the fluorescence signal can be expressed as a zero-mean fluctuation: δ F ( r → , t ) = F ( r → , t ) − ⟨ F ( r → , t ) ⟩ t {\displaystyle \delta F({\vec {r}},t)=F({\vec {r}},t)-\langle F({\vec {r}},t)\rangle _{t}} where ⟨ ⋯ ⟩ t {\displaystyle \langle \cdots \rangle _{t}} denotes time-averaging. The auto-correlation here e.g. the second-order can then be described deductively as follows for a certain time-lag τ {\displaystyle \tau } : δ F ( r → , t ) = ⟨ δ F ( r → , t + τ ) ⋅ δ F ( r → , t ) ⟩ t {\displaystyle \delta F({\vec {r}},t)=\langle \delta F({\vec {r}},t+\tau )\cdot \delta F({\vec {r}},t)\rangle _{t}} From these equations it follows that the PSF of the optical system has to be taken to the power of the order of the correlation. Thus in a second-order correlation the PSF would be reduced along all dimensions by a factor of 2 {\displaystyle {\sqrt {2}}} . As a result, the resolution of the SOFI-images increases according to this factor. === Cumulants versus correlations === Using only the simple correlation function for a reassignment of pixel values, would ascribe to the independency of fluctuations of the emitters in time in a way that no cross-correlation terms would contribute to the new pixel value. Calculations of higher-order correlation functions would suffer from lower-order correlations for what reason it is superior to calculate cumulants, since all lower-order correlation terms vanish. == Cumulant-calculation == === Auto-cumulants === For computational reasons it is convenient to set all time-lags in higher-order cumulants to zero so that a general expression for the n-th order auto-cumulant can be found: A C n ( r → , τ 1 … n − 1 = 0 ) = ∑ k = 1 N U n ( r → − r → k ) ε k n w k ( 0 ) {\displaystyle AC_{n}({\vec {r}},\tau _{1\ldots n-1}=0)=\sum _{k=1}^{N}U^{n}({\vec {r}}-{\vec {r}}_{k})\varepsilon _{k}^{n}w_{k}(0)} w k {\displaystyle w_{k}} is a specific correlation based weighting function influenced by the order of the cumulant and mainly depending on the fluctuation properties of the emitters. Albeit there is no fundamental limitation in calculating very high orders of cumulants and thereby shrinking the FWHM of the PSF there are practical limitations according to the weighting of the values assigned to the final image. Emitters with a higher molecular brightness will show a strong increase in terms of the pixel cumulant value assigned at higher-orders as well as this performance can be expected from a diverse appearance of fluctuations of different emitters. A wide intensity range of the resulting image can therefore be expected and as a result dim emitters can get masked by bright emitters in higher-order images:. The calculation of auto-cumulants can be realized in a very attractive way in a mathematical sense. The n-th order cumulant can be calculated with a basic recursion from moments K n ( r → ) = μ n ( r → ) − ∑ i = 1 n − 1 ( n − 1 i ) K n − i ( r → ) μ i ( r → ) {\displaystyle K_{n}({\vec {r}})=\mu _{n}({\vec {r}})-\sum _{i=1}^{n-1}{\begin{pmatrix}n-1\\i\end{pmatrix}}K_{n-i}({\vec {r}})\mu _{i}({\vec {r}})} where K is a cumulant of the index's order, likewise μ {\displaystyle \mu } represents the moments. The term within the brackets indicates a binomial coefficient. This way of computation is straightforward in comparison with calculating cumulants with standard formulas. It allows for the calculation of cumulants with only little time of computing and is, as it is well implemented, even suitable for the calculation of high-order cumulants on large images. === Cross-cumulants === In a more advanced approach cross-cumulants are calculated by taking the information of several pixels into account. Cross-cumulants can be described as follows: C C n ( r → , τ 1 … n − 1 = 0 ) = ∏ j < l n U ( r → j − r → l n ) ⋅ ∑ i = 1 N U n ( r → i − ∑ k n r → k n ) ε i n w i ( 0 ) {\displaystyle CC_{n}({\vec {r}},\tau _{1\ldots n-1}=0)=\prod _{j Read more →
Luminance HDR

Luminance HDR, formerly Qtpfsgui, is graphics software used for the creation and manipulation of high-dynamic-range images. Released under the terms of the GPL, it is available for Linux, Microsoft Windows, and Mac OS X (Intel only). Luminance HDR supports several High Dynamic Range (HDR) as well as Low Dynamic Range (LDR) file formats. == Functionality == Prerequisite of HDR photography are several narrow-range digital images with different exposures. Luminance HDR combines these images and calculates a high-contrast image. In order to view this image on a regular computer monitor, Luminance HDR can convert it into a displayable LDR image format using a variety of methods, such as tone mapping. Currently fifteen different tone mapping operators (algorithms) are available, each one with its tunable parameters. Different image processing techniques can be applied to the generated HDR images, such as resizing, cropping, rotating and a number of projective transformations. The software also provides batch processing functionality for creating HDR images and for tone mapping them in a non-interactive way. A module for copying Exif data among sets of images is also provided. For users who prefers the command line, a non-GUI, non-graphical interface is also available on all supported platforms. A common problem with HDR photography is that images need to be aligned exactly. If the subject is static, this can be achieved using a tripod or a stable surface on which the camera is placed. In the case of image data that does not align exactly, an automatic alignment can be performed using a tool provided by the Hugin project. If this automation doesn't provide the desired result, the user may improve it manually. == Supported formats == HDR images are images with a high dynamic range and, using Luminance HDR, they can be created as well as edited. The following HDR graphic formats are supported: OpenEXR Radiance HDR Tag Image File Format (TIFF) Format: 16 Bit, 32 Bit (Float) and LogLuv Raw PFS native Luminance HDR can create an HDR image from several LDR images and tonemap an HDR into an LDR. The following LDR formats are supported: JPG PNG Portable Pixmap (PPM) Portable Bitmap (PBM) TIFF (8 Bit)
Read more →
BabyCenter

BabyCenter is an online media company based in San Francisco, New York City, Chicago, and Los Angeles that provides information on conception, pregnancy, birth, and early childhood development for parents and expecting parents. BabyCenter operates 8 country and region specific properties including websites, apps, emails, print publications, and an online community where parents can connect on a variety of topics. The visitors of website and the users of the app can sign up for free weekly email newsletters that guide them through pregnancy and their child's development. In addition to publishing detailed, medically reviewed information about pregnancy and parenting, BabyCenter, under its Mission Motherhood initiative, ran numerous social programs and has participated in public health initiatives in partnership with hospitals, healthcare agencies, nonprofits, NGOs, and government agencies to provide pregnancy and parenting advice. It also annually publishes the most popular baby names. BabyCenter LLC is part of the Everyday Health Group, a division of Ziff Davis. == History == BabyCenter was founded in October 1997 by Stanford University MBA graduates Matt Glickman and Mark Selcow, who recognized a need for information about pregnancy and parenting on the internet. BabyCenter was initially funded through $13.5 million in startup capital funding from venture capital firms, including Bessemer Venture Partners, Intel, and Trinity Ventures. The funds were used to open the BabyCenter Store in October 1998. In the early years of its operation, BabyCenter offered multiple resources and services for parents, including a website that provided medically reviewed information and guidance to new and expectant parents on such topics as fertility, labor, and childcare; a weekly email for pregnant women tailored to their week of pregnancy (based on their pregnancy due date); and community groups and chat rooms for pregnant couples and parents to discuss pregnancy and child-rearing strategies. The site grew quickly, and by early 1999 had 175 employees and an annual revenue of $35 million. In April of that year, the two founders sold BabyCenter to another website, eToys.com, for $190 million in stock. Twenty-three months later, in 2001, shortly before declaring bankruptcy, eToys sold the site to Johnson & Johnson for $10 million. During the eToys ownership, BabyCenter launched its first international E-commerce site in the UK during the spring of 2000. Starting in 2005, BabyCenter launched an expansion plan, extending its global network to Australia, Canada and other countries, staffing each outpost with local editors. In 2007, BabyCenter debuted a Mandarin-language site in China, initiated operations in India, launched a Spanish language website, and introduced its first mobile site. BabyCenter released My Pregnancy Today, its first mobile app, to Apple's App Store in August 2010 and to the Android market in April 2011. The app provided daily information, nutrition tips, advice relevant to the user's week of pregnancy, and 3-D animated videos showcasing a baby's development in utero. The My Pregnancy app was joined by a My Baby Today app in October 2011. In 2015, BabyCenter released Mom Feed, its first mobile app for parents of toddlers and older children (ages 1 to 8). Mom Feed offered personalized, stage-based information as well as content from the BabyCenter Community and Blog in a real-time stream. In 2016, BabyCenter launched its web-based Baby Names Finder. In 2018, Mom Feed was discontinued and BabyCenter replaced that experience with a separate Child Health content area on its website. Also in 2018, BabyCenter launched its mobile baby name generator, the Baby Names app, which, like the web-based Baby Names Finder, leverages data from hundreds of thousands of parents that culminates in its annual most popular Baby Names Report. In 2019, Johnson & Johnson sold Baby Center to Everyday Health Group, a division of New York-based parent company of Ziff Davis, Inc. Neither side disclosed terms of the deal. == Popular research == BabyCenter's most popular baby names is released annually and often cited by the media. In March 2024, BabyCenter did a review of the app Temu and said that the website has found products that have been recalled, could be counterfeit or circumvent U.S. safety standards and features that are important in preventing issues like choking. In 2025, BabyCenter released a report about the cost of raising a newborn baby in the first year. == Content and products == === Websites === BabyCenter has 8 country and region-specific websites around the world, including sites for the United States, Canada, Australia, Brazil, India, Germany, the United Kingdom, and Latin America. Users can find parenting and pregnancy advice in seven languages: English, Spanish, Portuguese, Arabic, French, German, and Hindi BabyCenter content for each country- or region-specific site is written by an editorial team based in that country or region. Medical and health content for each site is reviewed by a medical advisory board based there and adheres to that country or region's medical standards. For example, the U.S. site works with and follows the recommendations of such U.S. medical authorities as the American Academy of Pediatrics, the American Congress of Obstetrics & Gynecology and the Society for Maternal-Fetal Medicine. BabyCenter regularly conducts research and provides thought leadership on pregnancy and parenting topics, popularly cited by major media outlets including The Wall Street Journal, Forbes, The Washington Post, BuzzFeed, Insider, MarketWatch, Axios. === Community, blogs and social === From its earliest days, BabyCenter has had a community area that allows people to join a group of parents with children born in the same month, known as a Birth Club. BabyCenter launched a blog called Momformation in 2007. Eventually, the name was changed to BabyCenter Blog. In April 2021, the BabyCenter Community was identified in a research article within the journal PLOS Computational Biology as facilitating "unobstructed communication" between parents, which avoids the "strong echo chamber phenomena" that can foster and perpetuate vaccine misinformation. === My Pregnancy and Baby Today App === The app is available in six languages, although not all features are supported for every market. Initially the apps only featured pregnancy articles that could be found on the BabyCenter website, but over the years the feature set has expanded to include a growing list of app-specific tools such as weekly fetal development information, a kick tracker, a birth plan worksheet, a contraction timer, a baby growth tracker, a photo journal for pregnant women to record their pregnancy bellies, and a photo journal for documenting a baby's first year. === Mission Motherhood™ === BabyCenter was a cofounder of the Mobile Alliance for Maternal Action (MAMA), a public-private partnership between USAID, Johnson & Johnson, the UN Foundation, and BabyCenter from 2011 to-to 2015. The MAMA program sparked the creation of MomConnect, an initiative of the South African Department of Health for which BabyCenter developed SMS messages with health information about pregnancy and a child's first year of life. BabyCenter helped develop similar messages for mMitra, a voice messaging program in India. A research article in the Maternal and Child Health Journal stated the mMitra program offered strong evidence "that tailored mobile phone voice messages can improve key infant care knowledge and practices that lead to improved infant health outcomes in low-resource settings. BabyCenter's Mission Motherhood Messages were available to qualifying organizations on the BabyCenter website. BabyCenter contributed websites for Free Basics. These websites featured age and stage-based pregnancy and baby articles targeted to low-income, lower-education women who would not otherwise have access to health information. Content developed for this program was also used to support a UNICEF SMS program during the 2016 Zika outbreak. == Awards and recognition == In 1998, BabyCenter won a Webby Award for Best Home Site. Since then, it has been nominated for a Webby Award 19 times and won either a Webby or a People's Choice Webby Award 12 times – including a People's Voice win in 2021 for Lifestyle websites and mobile sites. In 2002, it won Service Journalism award from Online Journalism Awards (OJA). In 2015, BabyCenter won five Digital Health Awards for content about autism in children. In 2016, BabyCenter won seven Digital Health Awards: four for videos about the aches and pains of pregnancy, baby sleep, and the walking milestone in child development; two for articles about baby sleep training and sleep apnea in babies; and one for the BabyCenter mobile app My Pregnancy & Baby Today. In 2021, Forbes Health chose My Pregnancy & Baby Today as the best pregnancy app of 2021, and Women's Health identified it
Read more →
Artificial intelligence

Artificial intelligence (AI) is the capability of computational systems to perform tasks typically associated with human intelligence, such as learning, reasoning, problem-solving, perception, and decision-making. It is a field of research in engineering, mathematics and computer science that develops and studies methods and software that enable machines to perceive their environment and use learning and intelligence to take actions that maximize their chances of achieving defined goals. High-profile applications of AI include advanced web search engines, chatbots, virtual assistants, autonomous vehicles, and play and analysis in strategy games (e.g., chess and Go). Since the 2020s, generative AI has become widely available to generate images, audio, and videos from text prompts. The traditional goals of AI research include learning, reasoning, knowledge representation, planning, natural language processing, and perception, as well as support for robotics. To reach these goals, AI researchers have used techniques including state space search and mathematical optimization, formal logic, artificial neural networks, and methods based on statistics, operations research, and economics. AI also draws upon psychology, linguistics, philosophy, neuroscience, and other fields. Some companies, such as OpenAI, Google DeepMind and Meta, aim to create artificial general intelligence (AGI) – AI that can complete virtually any cognitive task at least as well as a human. Artificial intelligence was founded as an academic discipline in 1956, and the field went through multiple cycles of optimism throughout its history, followed by periods of disappointment and loss of funding, known as AI winters. Funding and interest increased substantially after 2012, when graphics processing units began being used to accelerate neural networks, and deep learning outperformed previous AI techniques. This growth accelerated further after 2017 with the transformer architecture. In the 2020s, an AI boom has coincided with advances in generative AI, which allowed for the creation and modification of media. In addition to AI safety and unintended consequences and harms from the use of AI, ethical concerns, AI's long-term effects, and potential existential risks have prompted discussions of AI regulation. == Goals == The general problem of simulating (or creating) intelligence has been broken into subproblems. These consist of particular traits or capabilities that researchers expect an intelligent system to display. The traits described below have received the most attention and cover the scope of AI research. === Reasoning and problem-solving === Early researchers developed algorithms that imitated step-by-step reasoning that humans use when they solve puzzles or make logical deductions. By the late 1980s and 1990s, methods were developed for dealing with uncertain or incomplete information, employing concepts from probability and economics. Many of these algorithms are insufficient for solving large reasoning problems because they experience a "combinatorial explosion": They become exponentially slower as the problems grow. Even humans rarely use the step-by-step deduction that early AI research could model. They solve most of their problems using fast, intuitive judgments. Accurate and efficient reasoning is an unsolved problem. === Knowledge representation === Knowledge representation and knowledge engineering allow AI programs to answer questions intelligently and make deductions about real-world facts. Formal knowledge representations are used in content-based indexing and retrieval, scene interpretation, clinical decision support, knowledge discovery (mining "interesting" and actionable inferences from large databases), and other areas. A knowledge base is a body of knowledge represented in a form that can be used by a program. An ontology is the set of objects, relations, concepts, and properties used by a particular domain of knowledge. Knowledge bases need to represent things such as objects, properties, categories, and relations between objects; situations, events, states, and time; causes and effects; knowledge about knowledge (what we know about what other people know); default reasoning (things that humans assume are true until they are told differently and will remain true even when other facts are changing); and many other aspects and domains of knowledge. Among the most difficult problems in knowledge representation are the breadth of commonsense knowledge (the set of atomic facts that the average person knows is enormous); and the sub-symbolic form of most commonsense knowledge (much of what people know is not represented as "facts" or "statements" that they could express verbally). There is also the difficulty of knowledge acquisition, the problem of obtaining knowledge for AI applications. === Planning and decision-making === An "agent" is any entity (artificial or not) that perceives and takes actions in the world. A rational agent has goals or preferences and takes actions to make them happen. In automated planning, the agent has a specific goal. In automated decision-making, the agent has preferences—there are some situations it would prefer to be in, and some situations it is trying to avoid. The decision-making agent assigns a number to each situation (called the "utility") that measures how much the agent prefers it. For each possible action, it can calculate the "expected utility": the utility of all possible outcomes of the action, weighted by the probability that the outcome will occur. It can then choose the action with the maximum expected utility. In classical planning, the agent knows exactly what the effect of any action will be. In most real-world problems, however, the agent may not be certain about the situation they are in (it is "unknown" or "unobservable") and it may not know for certain what will happen after each possible action (it is not "deterministic"). It must choose an action by making a probabilistic guess and then reassess the situation to see if the action worked. Alongside thorough testing and improvement based on previous decisions, having an explanation for why the agent took certain decisions is a way to build trust, especially when the decisions have to be relied upon. In some problems, the agent's preferences may be uncertain, especially if there are other agents or humans involved. These can be learned (e.g., with inverse reinforcement learning), or the agent can seek information to improve its preferences. Information value theory can be used to weigh the value of exploratory or experimental actions. The space of possible future actions and situations is typically intractably large, so the agents must take actions and evaluate situations while being uncertain of what the outcome will be. A Markov decision process has a transition model that describes the probability that a particular action will change the state in a particular way and a reward function that supplies the utility of each state and the cost of each action. A policy associates a decision with each possible state. The policy could be calculated (e.g., by iteration), be heuristic, or it can be learned. Game theory describes the rational behavior of multiple interacting agents and is used in AI programs that make decisions that involve other agents. === Learning === Machine learning is the study of programs that can improve their performance on a given task automatically. It has been a part of AI from the beginning. There are several kinds of machine learning. Unsupervised learning analyzes a stream of data and finds patterns and makes predictions without any other guidance. Supervised learning requires labeling the training data with the expected answers, and comes in two main varieties: classification (where the program must learn to predict what category the input belongs in) and regression (where the program must deduce a numeric function based on numeric input). In reinforcement learning, the agent is rewarded for good responses and punished for bad ones. The agent learns to choose responses that are classified as "good". Transfer learning is when the knowledge gained from one problem is applied to a new problem. Deep learning is a type of machine learning that runs inputs through biologically inspired artificial neural networks for all of these types of learning. Computational learning theory can assess learners by computational complexity, by sample complexity (how much data is required), or by other notions of optimization. === Natural language processing === Natural language processing (NLP) allows programs to read, write and communicate in human languages. Specific problems include speech recognition, speech synthesis, machine translation, information extraction, information retrieval and question answering. Early work, based on Noam Chomsky's generative grammar and semantic networks, had difficulty with word-sense disambiguation unless
Read more →
Autonomous aircraft

An autonomous aircraft is an aircraft which flies under the control of on-board autonomous robotic systems and needs no intervention from a human pilot or remote control. Most contemporary autonomous aircraft are unmanned aerial vehicles (drones) with pre-programmed algorithms to perform designated tasks, but advancements in artificial intelligence technologies (e.g. machine learning) mean that autonomous control systems are reaching a point where several air taxis and associated regulatory regimes are being developed. == History == === Unmanned aerial vehicles === The earliest recorded use of an unmanned aerial vehicle for warfighting occurred in July 1849, serving as a balloon carrier (the precursor to the aircraft carrier) Significant development of radio-controlled drones started in the early 1900s, and originally focused on providing practice targets for training military personnel. The earliest attempt at a powered UAV was A. M. Low's "Aerial Target" in 1916. Autonomous features such as the autopilot and automated navigation were developed progressively through the twentieth century, although techniques such as terrain contour matching (TERCOM) were applied mainly to cruise missiles. Before the introduction of the Bayraktar Kızılelma some modern drones have a high degree of autonomy, although they were not fully capable and the regulatory environment prohibits their widespread use in civil aviation. However some limited trials had been undertaken. On December 17, 2025, two Bayraktar Kızılelma performed the world's first autonomous close-formation flight by two unmanned fighter jets, using artificial intelligence. This was the first time in the history of aviation when two unmanned aerial vehicles flew in close formation on their own. === Passengers === As flight, navigation and communications systems have become more sophisticated, safely carrying passengers has emerged as a practical possibility. Autopilot systems are relieving the human pilot of progressively more duties, but the pilot currently remains necessary. A number of air taxis are under development and larger autonomous transports are also being planned. The personal air vehicle is another class where from one to four passengers are not expected to be able to pilot the aircraft and autonomy is seen as necessary for widespread adoption. == Control system architecture == The computing capability of aircraft flight and navigation systems followed the advances of computing technology, beginning with analog controls and evolving into microcontrollers, then system-on-a-chip (SOC) and single-board computers (SBC). === Sensors === Position and movement sensors give information about the aircraft state. Exteroceptive sensors deal with external information like distance measurements, while proprioceptive ones correlate internal and external states. Degrees of freedom (DOF) refers to both the amount and quality of sensors on board: 6 DOF implies 3-axis gyroscopes and accelerometers (a typical inertial measurement unit – IMU), 9 DOF refers to an IMU plus a compass, 10 DOF adds a barometer and 11 DOF usually adds a GPS receiver. === Actuators === UAV actuators include digital electronic speed controllers (which control the RPM of the motors) linked to motors/engines and propellers, servomotors (for planes and helicopters mostly), weapons, payload actuators, LEDs and speakers. === Software === UAV software called the flight stack or autopilot. The purpose of the flight stack is to obtain data from sensors, control motors to ensure UAV stability, and facilitate ground control and mission planning communication. UAVs are real-time systems that require rapid response to changing sensor data. As a result, UAVs rely on single-board computers for their computational needs. Examples of such single-board computers include Raspberry Pis, Beagleboards, etc. shielded with NavIO, PXFMini, etc. or designed from scratch such as NuttX, preemptive-RT Linux, Xenomai, Orocos-Robot Operating System or DDS-ROS 2.0. Civil-use open-source stacks include: Due to the open-source nature of UAV software, they can be customized to fit specific applications. For example, researchers from the Technical University of Košice have replaced the default control algorithm of the PX4 autopilot. This flexibility and collaborative effort has led to a large number of different open-source stacks, some of which are forked from others, such as CleanFlight, which is forked from BaseFlight and from which three other stacks are forked from. === Loop principles === UAVs employ open-loop, closed-loop or hybrid control architectures. Open loop – This type provides a positive control signal (faster, slower, left, right, up, down) without incorporating feedback from sensor data. Closed loop – This type incorporates sensor feedback to adjust behavior (reduce speed to reflect tailwind, move to altitude 300 feet). The PID controller is common. Sometimes, feedforward is employed, transferring the need to close the loop further. == Communications == Most UAVs use a radio for remote control and exchange of video and other data. Early UAVs had only narrowband uplink. Downlinks came later. These bi-directional narrowband radio links carried command and control (C&C) and telemetry data about the status of aircraft systems to the remote operator. For very long range flights, military UAVs also use satellite receivers as part of satellite navigation systems. In cases when video transmission was required, the UAVs will implement a separate analog video radio link. In most modern autonomous applications, video transmission is required. A broadband link is used to carry all types of data on a single radio link. These broadband links can leverage quality of service techniques to optimize the C&C traffic for low latency. Usually, these broadband links carry TCP/IP traffic that can be routed over the Internet. Communications can be established with: Ground control – a military ground control station (GCS). The MAVLink protocol is increasingly becoming popular to carry command and control data between the ground control and the vehicle. Remote network system, such as satellite duplex data links for some military powers. Downstream digital video over mobile networks has also entered consumer markets, while direct UAV control uplink over the cellular mesh and LTE have been demonstrated and are in trials. Another aircraft, serving as a relay or mobile control station – military manned-unmanned teaming (MUM-T). As mobile networks have increased in performance and reliability over the years, drones have begun to use mobile networks for communication. Mobile networks can be used for drone tracking, remote piloting, over the air updates, and cloud computing. Modern networking standards have explicitly considered autonomous aircraft and therefore include optimizations. The 5G standard has mandated reduced user plane latency to 1ms while using ultra-reliable and low-latency communications. == Autonomy == Basic autonomy comes from proprioceptive sensors. Advanced autonomy calls for situational awareness, knowledge about the environment surrounding the aircraft from exteroceptive sensors: sensor fusion integrates information from multiple sensors. Civil aviation regulators and standards bodies have published high-level roadmaps and discussion papers focused on assurance, safety and governance of AI-enabled systems in aviation, particularly as autonomy increases in operations and decision support. === Basic principles === One way to achieve autonomous control employs multiple control-loop layers, as in hierarchical control systems. As of 2016 the low-layer loops (i.e. for flight control) tick as fast as 32,000 times per second, while higher-level loops may cycle once per second. The principle is to decompose the aircraft's behavior into manageable "chunks", or states, with known transitions. Hierarchical control system types range from simple scripts to finite state machines, behavior trees and hierarchical task planners. The most common control mechanism used in these layers is the PID controller which can be used to achieve hover for a quadcopter by using data from the IMU to calculate precise inputs for the electronic speed controllers and motors. Examples of mid-layer algorithms: Path planning: determining an optimal path for vehicle to follow while meeting mission objectives and constraints, such as obstacles or fuel requirements Trajectory generation (motion planning): determining control maneuvers to take in order to follow a given path or to go from one location to another Trajectory regulation: constraining a vehicle within some tolerance to a trajectory Evolved UAV hierarchical task planners use methods like state tree searches or genetic algorithms. === Autonomy features === UAV manufacturers often build in specific autonomous operations, such as: Self-level: attitude stabilization on the pitch and roll axes. Altitude hold: The aircraft maint
Read more →
Adobe Prelude

Adobe Prelude was an ingest and logging software application for tagging media with metadata for searching, post-production workflows, and footage lifecycle management. Adobe Prelude is also made to work closely with Adobe Premiere Pro. It is part of the Adobe Creative Cloud and is geared towards professional video editing alone or with a group. The software also offers features like rough cut creation. A speech transcription feature was removed in December 2014. == History == Adobe announced that on April 23, 2012 Adobe OnLocation would be shut down and Adobe Prelude would launch on May 7, 2012. Adobe stated OnLocation's production was stopping because of the growing trend in the industry toward tapeless, native workflows, Adobe stresses that Adobe Prelude is not a direct replacement for OnLocation. Adobe OnLocation was available in CS5 but not in CS6 and Adobe Prelude is only available in CS6. Adobe still offers technical support for OnLocation. In 2021, Adobe announced they would be discontinuing Adobe Prelude, starting by removing it from their website on September 8, 2021. Support for existing users will continue through September 8, 2024. == Features == Prelude is used to tag media, log data, create and export metadata and generate rough cuts that can be sent to Adobe Premiere Pro. A user can add a tag to a piece of media that will show up on Premiere Pro or if another user opens that media with Prelude. Ingest Footage Prelude can ingest all kinds of file types. Once ingested, Prelude can duplicate, transcode and verify the files. Log Footage Prelude can log data only using the keyboard. Create Rough Cuts Prelude is able to generate Rough Cuts. Rough Cuts are a combination of sub clips that will hold any metadata a user feeds into it. Rough cuts can hold metadata such as markers and comments, and this metadata will stay on this footage. Workflow Accessibility Prelude is an XMP - based open platform that allows for custom integration into many video editing platforms. == Features from OnLocation == Many features from Adobe OnLocation went to Adobe Prelude or Adobe Premiere Pro. Adobe OnLocation thrived on tape - based cameras and setting up a shot before shooting it, with the change in the industry, this problem is irrelevant in post production. Adobe OnLocation also allowed the user to add tags and scripting metadata that would carry over to Premiere Pro. OnLocation also had a Media Browser pane, which is the standard for any Adobe program today, Prelude has this Media Browser as well. == Prelude Live Logger == Prelude Live Logger is an application integrated with Prelude CC. Prelude Live Logger is designed to capture notes to use during video logging and editing while you shoot footage on an iPad's camera. Editors can import and combine this metadata with footage from Prelude throughout editing to facilitate various tasks.
Read more →
ARD Sounds

ARD Sounds (until March 2026: ARD Audiothek) is the joint audio portal of the state broadcasting stations of the ARD and Deutschlandradio on the Internet. The service was officially launched as a mobile app on November 8, 2017, on the occasion of the ARD Radio Play Days in Karlsruhe. A beta web version has also been available since November 2018; it replaces the radio features in the ARD Mediathek, which has since offered only video content. Editorial support for the ARD Audiothek is provided by the ARD, the online editorial team in Mainz. In April 2018, the ARD Audiothek won the German Digital Award in silver in the category "Mobile Apps - User Experience / Usability". Within a year, the mobile app version had been installed more than 510,000 times and had around 21 million audio views. The Android app recorded more than 100,000 downloads in October 2019, according to the Google Play Store.
Read more →
Azure Stream Analytics

Microsoft Azure Stream Analytics is a serverless scalable complex event processing engine by Microsoft that enables users to develop and run real-time analytics on multiple streams of data from sources such as devices, sensors, web sites, social media, and other applications. Users can set up alerts to detect anomalies, predict trends, trigger necessary workflows when certain conditions are observed, and make data available to other downstream applications and services for presentation, archiving, or further analysis. == Query Language == Users can author real-time analytics using a simple declarative SQL-like language with embedded support for temporal logic. Callouts to custom code with JavaScript user defined functions extend the streaming logic written in SQL. Callouts to Azure Machine Learning helps with predictive scoring on streaming data. == Scalability == Azure Stream Analytics is a serverless job service on Azure that eliminates the need for infrastructure, servers, virtual machines, or managed clusters. Users only pay for the processing used for the running jobs. == IoT applications == Azure Stream Analytics integrates with Azure IoT Hub to enable real-time analytics on data from IoT devices and applications. == Real-time Dashboards == Users can build real-time dashboards with Power BI for a live command and control view. Real-time dashboards help transform live data into actionable and insightful visuals. == Data Input Sources == Stream Analytics supports three different types of input sources - Azure Event Hubs, Azure IoT Hubs, and Azure Blob Storage. Additionally, stream analytics supports Azure Blob storage as the input reference data to help augment fast moving event data streams with static data. Stream analytics supports a wide variety of output targets. Support for Power BI allows for real-time dashboarding. Event Hub, Service bus topics and queues help trigger downstream workflows. Support for Azure Table Storage, Azure SQL Databases, Azure SQL Data Warehouse, Azure SQL, Document DB, Azure Data Lake Store enable a variety of downstream analysis and archiving capabilities.
Read more →
Turret lathe

A turret lathe is a form of metalworking lathe that is used for repetitive production of duplicate parts, which by the nature of their cutting process are usually interchangeable. It evolved from earlier lathes with the addition of the turret, which is an indexable toolholder that allows multiple cutting operations to be performed, each with a different cutting tool, in easy, rapid succession, with no need for the operator to perform set-up tasks in between (such as installing or uninstalling tools) or to control the toolpath. The latter is due to the toolpath's being controlled by the machine, either in jig-like fashion, via the mechanical limits placed on it by the turret's slide and stops, or via digitally-directed servomechanisms for computer numerical control lathes. The name derives from the way early turrets took the general form of a flattened cylindrical block mounted to the lathe's cross-slide, capable of rotating about the vertical axis and with toolholders projecting out to all sides, and thus vaguely resembled a swiveling gun turret. Capstan lathe is the usual name in the UK and Commonwealth, though the two terms are also used in contrast: see below, Capstan versus turret. == History == Turret lathes became indispensable to the production of interchangeable parts and for mass production. The first turret lathe was built by Stephen Fitch in 1845 to manufacture screws for pistol percussion parts. In the mid-nineteenth century, the need for interchangeable parts for Colt revolvers enhanced the role of turret lathes in achieving this goal as part of the "American system" of manufacturing arms. Clock-making and bicycle manufacturing had similar requirements. Christopher Spencer invented the first fully automated turret lathe in 1873, which led to designs using cam action or hydraulic mechanisms. From the late-19th through mid-20th centuries, turret lathes, both manual and automatic (i.e., screw machines and chuckers), were one of the most important classes of machine tools for mass production. They were used extensively in the mass production for the war effort in World War II. The U.S. company Warner & Swasey was one of the premier brands in heavy turret lathes between the 1910s and 1960s; it became the world's largest manufacturer of such lathes by 1928. During World War II, it employed 7,000 people and produced half of the turret lathes manufactured in the United States. == Types == There are many variants of the turret lathe. They can be most generally classified by size (small, medium, or large); method of control (manual, automated mechanically, or automated via computer (numerical control (NC) or computer numerical control (CNC)); and bed orientation (horizontal or vertical). === Archetypical: horizontal, manual === In the late 1830s a "capstan lathe" with a turret was patented in Britain. The first American turret lathe was invented by Stephen Fitch in 1845. The archetypical turret lathe, and the first in order of historical appearance, is the horizontal-bed, manual turret lathe. The term "turret lathe" without further qualification is still understood to refer to this type. The formative decades for this class of machine were the 1840s through 1860s, when the basic idea of mounting an indexable turret on a bench lathe or engine lathe was born, developed, and disseminated from the originating shops to many other factories. Some important tool-builders in this development were Stephen Fitch; Gay, Silver & Co.; Elisha K. Root of Colt; J.D. Alvord of the Sharps Armory; Frederick W. Howe, Richard S. Lawrence, and Henry D. Stone of Robbins & Lawrence; J.R. Brown of Brown & Sharpe; and Francis A. Pratt of Pratt & Whitney. Various designers at these and other firms later made further refinements. === Semi-automatic === Sometimes machines similar to those above, but with power feeds and automatic turret-indexing at the end of the return stroke, are called "semi-automatic turret lathes". This nomenclature distinction is blurry and not consistently observed. The term "turret lathe" encompasses them all. During the 1860s, when semi-automatic turret lathes were developed, they were sometimes called "automatic". What we today would call "automatics", that is, fully automatic machines, had not been developed yet. During that era both manual and semi-automatic turret lathes were sometimes called "screw machines", although we today reserve that term for fully automatic machines. === Automatic === During the 1870s through 1890s, the mechanically automated "automatic" turret lathe was developed and disseminated. These machines can execute many part-cutting cycles without human intervention. Thus the duties of the operator, which were already greatly reduced by the manual turret lathe, were even further reduced, and productivity increased. These machines use cams to automate the sliding and indexing of the turret and the opening and closing of the chuck. Thus, they execute the part-cutting cycle somewhat analogously to the way in which an elaborate cuckoo clock performs an automated theater show. Small- to medium-sized automatic turret lathes are usually called "screw machines" or "automatic screw machines", while larger ones are usually called "automatic chucking lathes", "automatic chuckers", or "chuckers". Such machine tools of the "automatic" variety, which in the pre-computer era meant mechanically automated, had already reached a highly advanced state by World War I. === Computer numerical control === When World War II ended, the digital computer was poised to develop from a colossal laboratory curiosity into a practical technology that could begin to disseminate into business and industry. The advent of computer-based automation in machine tools via numerical control (NC) and then computer numerical control (CNC) displaced to a large extent, but not at all completely, the previously existing manual and mechanically automated machines. Numerically controlled turrets allow automated selection of tools on a turret. CNC lathes may be horizontal or vertical in orientation and mount six separate tools on one or more turrets. Such machine tools can work in two axes per turret, with up to six axes being feasible for complex work. === Vertical === Vertical turret lathes have the workpiece held vertically, which allows the headstock to sit on the floor and the faceplate to become a horizontal rotating table, analogous to a huge potter's wheel. This is useful for the handling of very large, heavy, short workpieces. Vertical lathes in general are also called "vertical boring mills" or often simply "boring mills"; therefore a vertical turret lathe is a vertical boring mill equipped with a turret. == Other variations == === Capstan versus turret === The term "capstan lathe" overlaps in sense with the term "turret lathe" to a large extent. In many times and places, it has been understood to be synonymous with "turret lathe". In other times and places it has been held in technical contradistinction to "turret lathe", with the difference being in whether the turret's slide is fixed to the bed (ram-type turret) or slides on the bed's ways (saddle-type turret). The difference in terminology is mostly a matter of United Kingdom and Commonwealth usage versus United States usage. === Flat === A subtype of horizontal turret lathe is the flat-turret lathe. Its turret is flat (and analogous to a rotary table), allowing the turret to pass beneath the part. Patented by James Hartness of Jones & Lamson, and first disseminated in the 1890s, it was developed to provide more rigidity via requiring less overhang in the tool setup, especially when the part is relatively long. === Hollow-hexagon === Hollow-hexagon turret lathes competed with flat-turret lathes by taking the conventional hexagon turret and making it hollow, allowing the part to pass into it during the cut, analogously to how the part would pass over the flat turret. In both cases, the main idea is to increase rigidity by allowing a relatively long part to be turned without the tool overhang that would be needed with a conventional turret, which is not flat or hollow. === Monitor lathe === The term "monitor lathe" formerly (1860s–1940s) referred to the class of small- to medium-sized manual turret lathes used on relatively small work. The name was inspired by the monitor-class warships, which the monitor lathe's turret resembled. Today, lathes of such appearance, such as the Hardinge DSM-59 and its many clones, are still common, but the name "monitor lathe" is no longer current in the industry. === Toolpost turrets and tailstock turrets === Turrets can be added to non-turret lathes (bench lathes, engine lathes, toolroom lathes, etc.) by mounting them on the toolpost, tailstock, or both. Often these turrets are not as large as a turret lathe's, and they usually do not offer the sliding and stopping that a turret lathe's turret does; but they do offer the ability to index through successive tool
Read more →
Behavior-based robotics

Behavior-based robotics (BBR) or behavioral robotics is an approach in robotics that focuses on robots that are able to exhibit complex-appearing behaviors despite little internal variable state to model its immediate environment, mostly gradually correcting its actions via sensory-motor links. == Principles == Behavior-based robotics sets itself apart from traditional artificial intelligence by using biological systems as a model. Classic artificial intelligence typically uses a set of steps to solve problems, it follows a path based on internal representations of events compared to the behavior-based approach. Rather than use preset calculations to tackle a situation, behavior-based robotics relies on adaptability. This advancement has allowed behavior-based robotics to become commonplace in researching and data gathering. Most behavior-based systems are also reactive, which means they need no programming of what a chair looks like, or what kind of surface the robot is moving on. Instead, all the information is gleaned from the input of the robot's sensors. The robot uses that information to gradually correct its actions according to the changes in immediate environment. Behavior-based robots (BBR) usually show more biological-appearing actions than their computing-intensive counterparts, which are very deliberate in their actions. A BBR often makes mistakes, repeats actions, and appears confused, but can also show the anthropomorphic quality of tenacity. Comparisons between BBRs and insects are frequent because of these actions. BBRs are sometimes considered examples of weak artificial intelligence, although some have claimed they are models of all intelligence. == Features == Most behavior-based robots are programmed with a basic set of features to start them off. They are given a behavioral repertoire to work with dictating what behaviors to use and when, obstacle avoidance and battery charging can provide a foundation to help the robots learn and succeed. Rather than build world models, behavior-based robots simply react to their environment and problems within that environment. They draw upon internal knowledge learned from their past experiences combined with their basic behaviors to resolve problems. == History == The school of behavior-based robots owes much to work undertaken in the 1980s at the Massachusetts Institute of Technology by Rodney Brooks, who with students and colleagues built a series of wheeled and legged robots utilizing the subsumption architecture. Brooks' papers, often written with lighthearted titles such as "Planning is just a way of avoiding figuring out what to do next", the anthropomorphic qualities of his robots, and the relatively low cost of developing such robots, popularized the behavior-based approach. Brooks' work builds—whether by accident or not—on two prior milestones in the behavior-based approach. In the 1950s, W. Grey Walter, an English scientist with a background in neurological research, built a pair of vacuum tube-based robots that were exhibited at the 1951 Festival of Britain, and which have simple but effective behavior-based control systems. The second milestone is Valentino Braitenberg's 1984 book, "Vehicles – Experiments in Synthetic Psychology" (MIT Press). He describes a series of thought experiments demonstrating how simply wired sensor/motor connections can result in some complex-appearing behaviors such as fear and love. Later work in BBR is from the BEAM robotics community, which has built upon the work of Mark Tilden. Tilden was inspired by the reduction in the computational power needed for walking mechanisms from Brooks' experiments (which used one microcontroller for each leg), and further reduced the computational requirements to that of logic chips, transistor-based electronics, and analog circuit design. A different direction of development includes extensions of behavior-based robotics to multi-robot teams. The focus in this work is on developing simple generic mechanisms that result in coordinated group behavior, either implicitly or explicitly.
Read more →
Edits (app)

Edits is an American photo and short form video editing software service owned by Meta Platforms. It allows users to create videos and edit them by using features like green screens, and AI animation, and also provides real-time statistics to Instagram creators to track their accounts. Accounts directly from Instagram can be imported, and videos can be exported vice-versa. It is available solely on iOS and Android. On Apple, it supports over 32 different languages, including French, Spanish, and Chinese. It has been noted by critics as a direct competitor for apps like CapCut, owned by Chinese brand ByteDance. The Instagram head, Adam Mosseri, also acknowledged these similarities. Launched on April 22 for both iOS and Android. It received over 5M+ users on Apple and Android combined in its first 4 days since its launch. == History == On January 19, 2025, following the ban of all ByteDance Apps from the Google Play Store, and App Store, Instagram head Adam Mosseri announced on Threads that they would be launching the app in February for iOS, followed by an Android counterpart. He said the app is working with select people to test its features. In a separate post, he emphasized that the app is "more for creators than casual video makers". == Features == Edits contains many similar features to other competition of video editors like KineMaster, Inshot, and CapCut. When creating a video, users have the option to export in resolution of HD, 4K, and 2K, along with having HDR and SDR support. Like many traditional video editing software, it includes a timeline, and basic undo-redo buttons. On the bottom bar, 7 tabs for editing exist, namely the Split, Volume, Adjust, Speed, Delete, Filters, Green Screen, Voice FX, Extract Audio, Mirror, Slip, Replace and Duplicate bars. Basic features, like splitting, and adjusting speed and volume of clips are present, along with more advanced Green Screens, and AI features. Being a mobile video editor app, Edits also has drag-and-drop features to ease customer usage. Users have the ability to record videos directly within the app. This feature allows users to create content without needing extra software or devices. They can choose from several focal lengths, which affect how close or wide the shot appears. The app also supports different frame rates. Users have the ability to record videos directly within the app. This feature allows users to create content without needing extra software or devices. Once users are done filming your clips, they can simply transfer them into a project to start editing immediately. Upcoming features for the app include Keyframes, AI-powered modification, Collaboration, and Enhanced creativity. == Reception == Since its release, it received over 5 million downloads in 4 days. Critically, the app received great rankings from many. From users, the app received an average of 4.45 stars over Google Play Store and App Store in the first few days, with Google Play Store receiving the least stars. As in reviews, it was received mixed by the public. Many people praised the smoothness and intuivity of the app. "The app is more than just a basic editor, offering a full suite of creative tools, including a dedicated tab for inspiration and trending audio, as well as a tab for managing drafts," said a blogger. Some users were disappointed with the range of editing tools, some users have noted that it could benefit from more transition options between clips. Some even reported crashing between clips.
Read more →
WomanStats Project

The WomanStats Project is a donor-funded research and database project housed at Brigham Young University that "seeks to collect detailed statistical data on the status of women around the world, and to connect that data with data on the security of states." The WomanStats Database aims to provide a comprehensive compilation of information on the status of women in the world. Coders comb the extant literature and conduct expert interviews to find qualitative and quantitative information on over 300 indicators of women's status in 174 countries with populations of at least 200,000. Access to the online database is free. == History and structure == WomanStats began as an outgrowth of a paper Dr. Valerie M. Hudson (of the Brigham Young University Political Science department) and one of her graduate students, Andrea den Boer, published in International Security on the association between national security and the abnormal sex ratio in Asia. After the success and influence of their first article, (later added as one of their top twenty national security articles of that journal of all time), Hudson and den Boer did further research on the connection between the status of women and national security, but found that there was no single database that covered the range of topics that they needed for their research. Consequently, they began compiling information on variables regarding the status of women around the world. The database was officially formed in 2001 and grew exponentially as it later added more variables. The Project went live on the Internet in July 2007. The principal investigators are: Valerie M. Hudson (International Relations), Bonnie Ballif-Spanvill (Psychology, emeritus), and Chad F. Emmett (Geography) all from Brigham Young University, Mary Caprioli from the University of Minnesota, Duluth (International Relations), Rose McDermott from Brown University (International Relations), Andrea Den Boer from the University of Kent at Canterbury in the United Kingdom (International Relations) and S. Matthew Stearmer from the Ohio State University (Sociology; doctoral student). Approximately a dozen undergraduate and graduate students at Brigham Young University and Texas A&M University work at any one time as coders for the project. The coders take the raw quantitative and qualitative data collected in government reports, news articles, research papers, etc. and sort the applicable information on women into categories. They may also implement scales developed by the principal investigators, or that they (the students) themselves have developed. == Database == As of February 2011, the database has 307 variables, covers 174 nations with populations over 200,000, uses 18,015 sources and contains over 111,000 individual data points. All data is referenced to original sources. Not every variable has information for each country; similarly, not all countries have information for each variable: overall, about 70% of country-variable combinations have information. These database coding gaps exist where information is not available or is incomplete, or variables are not collected and reported by governments or international organizations. At times, information from different sources may be contradictory, and the WomanStats Database records this discrepant information for triangulation purposes. == Users and role of the database == The database is meant to help fill a hole in the extant data on the situation of women around the world. WomanStats data and research has been vetted and/or used by the United Nations, the United States Department of Defense, the Central Intelligence Agency, and the World Bank. Their data and research were also used by the United States Senate Committee on Foreign Relations in crafting the International Violence Against Women’s Act. The Inter-Agency Network on Women and Gender Equality (IANWGE) of the United Nations has stated that the WomanStats project "filled a major gap in the availability of data on women" (2007). Victor Asal and Mitchell Brown, researchers not affiliated with WomanStats, stated in an article published in Politics and Policy that "one of the most significant challenges of cross-national empirical studies of the prevalence of interpersonal violence is the paucity of available data, particularly reliable data," and that "WomanStats has allowed for an important first glimpse at analyzing the factors related to interpersonal violence." They conclude by stating that "Our findings suggest that, in the same way that larger disciplinary resources have invested in interstate and intrastate war, disciplinary resources need to be expended in creating a data set exploring interpersonal violence. Until the rights and the lives of women and children are taken as seriously as the survival of states by more proactively collaborating on projects like WomanStats, we will continue to only have a small lens through which to understand problems like this." Princeton University professor Evan S. Liberman wrote, "Although data on political regimes and group conflict have been in far greater demand by political scientists than data on gender politics and policies, two gender-related databases provide...examples of innovative HIRDs. Both the Womanstats database project (Hudson et al. 2009) and the Research Network on Gender Politics and the State (RNGS) project (McBride et al. 2008) are well-integrated presentations of quantitative and qualitative data characterizing the quality of gender relations around the world and, in particular, analytic descriptions of the treatment of women."." == Research == The research component of WomanStats focuses on exploring the relationship between the situation of women and the behavior and security of states. Current research initiatives include: Exploring the relationship between violent instability and inequity and family law. Examining the effect of polygyny and marriage market dislocations on the rise of suicide terrorism. Documenting discrepancies between laws on the books and cultural practices on the ground concerning gender issues. Investigating how well the situation of women predicts the peacefulness of nations-states, compared to their variables such as democracy, wealth, and civilization. The Project has published articles in International Security, International Studies Quarterly, Peace and Conflict, Journal of Peace Research, Political Psychology, Cumberland Law Review, and World Political Review, and has a forthcoming book from Columbia University Press.
Read more →
DeepRoute.ai

DeepRoute.ai (Chinese: 元戎启行) is a Chinese autonomous driving company founded in 2019 and headquartered in Shenzhen, China. The company develops full-stack self-driving solutions including perception, decision-making, and control systems. == History == DeepRoute.ai was founded in February 2019 in Shenzhen, China, by Zhou Guang (周光), who serves as the company's CEO. In September 2019, the company collaborated with Dongfeng for a live-streamed autonomous driving demonstration. In October 2019, during the 7th Military World Games, DeepRoute.ai conducted Robotaxi demonstration operations. In November 2019, it obtained an intelligent connected vehicle road test permit for public roads in Shenzhen. In October 2020, DeepRoute.ai signed an "Autonomous Driving Leadership Project" with Dongfeng to build one of China's largest autonomous fleets. In August 2020, DeepRoute.ai announced its partnership with Cao Cao Mobility, a Geely-backed ride-hailing company, to test Robotaxis in Hangzhou for daily operations, planning to provide Robotaxis during the 2022 Asian Games. In September 2021, DeepRoute.ai secured US$300 million in a Series B funding round led by Alibaba. In December 2021, the company unveiled its DeepRoute-Driver 2.0, an L4-level autonomous driving solution comprising five solid-state lidar sensors, eight cameras, a proprietary computing system and an optional millimeter-wave radar. with a production cost of under US$10,000. In June 2022, it partnered with Deppon Express to provide autonomous light truck freight transfer services. In March 2023, the company launched its high-precision map-free intelligent driving solution, DeepRoute-Driver 3.0. In November 2024, Great Wall Motor announced a $100 million Series C funding round for Deeproute. With this, Deeproute has completed five rounds of financing, raising a cumulative total of over $500 million. Its shareholders include Fosun RZ Capital, Yunqi Partners, Alibaba, Vision Plus Capital, and Dongfeng, among others. In the same month, Deeproute.ai emphasised that they were in "deep cooperation" with Nvidia and spoke on being part of the first batch of companies in China to get a hold of Nvidia's newer Thor chip for cars which will be used in a new system released next year. This new system will help manage more complex driving scenarios through visual cues. == Products == === VLA Model === VLA Model is a Vision–language–action model designed for autonomous driving systems. It integrates visual perception, semantic understanding, and action decision-making into a unified framework, aiming to enhance the safety and adaptability of advanced driver-assistance systems (ADAS) in complex road environments. The model was officially launched on August 26, 2025, as the core of DeepRoute.ai's DeepRoute IO 2.0 platform. The VLA model is characterized by its "visual-language-action" architecture, which incorporates a chain-of-thought (CoT) reasoning capability inspired by large language models. This design is intended to address the "black box" limitations of traditional end-to-end autonomous driving systems by enabling the model to analyze information, infer causality, and make decisions in a more transparent and interpretable manner. === Appliance === The company has partnered with several automakers including Dongfeng Motor Corporation and Geely to develop and test autonomous vehicles.
Read more →
HTK Limited

HTK Limited is a software-as-a-service company that provides mobile phone messaging and IVR services. Founded in 1996, HTK is headquartered in Ipswich, Suffolk, UK. HTK provide mass notification services. Specifically, the "Police Direct" messaging service to Suffolk and Norfolk Constabularies. In 2010 the HTK Horizon SaaS platform was selected by the Scottish Environment Protection Agency (SEPA) for their Floodline Warnings Direct service. == History == HTK was founded in 1996 by Marlon Bowser and Adrian Gregory and from the outset focused on what has now become commonly known as Software-as-a-Service. in 2004, according to the Deloitte Fast 50 (UK), HTK was the 17th fastest growing company in the East of England. In 2005 The Times listed HTK 65th nationally and 4th in the East of England in the Sunday Times & Microsoft "Tech Track 100" awards. In 2009 the company was approved as a supplier to UK Government under a new framework agreement. In 2010 HTK launched version 2.2 of its Horizon platform, with a feature set that signals a shift from mass notification into the customer service automation market.
Read more →