AI Content To Human

AI Content To Human — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Mobile DevOps

Mobile DevOps is a set of practices that applies the principles of DevOps specifically to the development of mobile applications. Traditional DevOps focuses on streamlining the software development process in general, but mobile development has its own unique challenges that require a tailored approach. Mobile DevOps is not simply as a branch of DevOps specific to mobile app development, instead an extension and reinterpretation of the DevOps philosophy due to very specific requirements of the mobile world. == Rationale == Traditional DevOps approach has been formed around 2007-2008, close to the dates when iOS and Android mobile operating systems were released to the public. The traditional DevOps approach primarily evolved to meet the changing needs of the software development world with the paradigm shift towards continuous and rapid development and deployment (such as in web development, where interpreted languages are more prevalent than compiled languages). While traditional DevOps embraced agility and flexibility, mobile operating system providers steered towards a walled-garden approach with compiled apps with tight controls over how they can be distributed and installed on a mobile device. This difference in the mobile development mindset compared to what the traditional DevOps approach is advocating, is augmented further with the mobile applications to be deployed on a high number of varying devices and operating systems. Eventually, the concept of Mobile DevOps took off as a trend around 2014-2015, in line with the fast growth of the number of applications in mobile app stores. As individuals and corporations alike are developing and publishing more and more mobile applications, the need for efficiency and shorter release cycles increased, which is addressed by the continuous feedback and continuous development approach within the concept of DevOps, while requiring a significant level of adaptation and extension of the traditional DevOps practices. == Mindset shift from traditional DevOps to mobile DevOps == Mobile DevOps has a unique set of challenges and constraints, which solidifies the fact that it needs to be approached as a separate discipline. These challenges can be outlined as follows: Platform-specific requirements and tight controls of mobile operating system providers, where for instance a macOS device is mandatory for iOS application development and release. The walled-garden approach of distributing mobile apps, specifically applying to iOS applications, which comes with app review and app release delays that would not be needed in web development, for instance. Code signing requirements that come with the walled-garden approach, which introduce additional processes in the mobile application build pipeline along with new security concerns. An entire deployment cycle is re-run even in the slightest code change due to how applications are compiled and delivered to the users. The final product is to be deployed to a wide variety of mobile devices worldwide, which requires extensive testing and user feedback. Monitoring mobile applications require additional tools and approaches to be able to get data from an application running on a mobile device while respecting user privacy. Frequent operating system updates by mobile platforms can require rapid adaptation of apps, introducing further complexity to the development and maintenance cycles. == Benefits of mobile DevOps == Mobile DevOps is not an abstract concept and offers a range of benefits that can help improve the efficiency and effectiveness of the mobile app development process. These benefits can even be quantified by collecting the data within the mobile application development lifecycle. The benefits can be categorized into the following areas: Faster Release Cycles: By automating tasks and streamlining the development process, mobile DevOps enables teams to deliver new features and updates more frequently. Improved Quality: Automated testing and continuous monitoring help to identify and fix bugs earlier in the development cycle, leading to higher quality apps. Optimized Resource Utilization: Mobile DevOps promotes optimized resource utilization by automating tasks and streamlining workflows. Furthermore, mobile DevOps practices like containerization can help to create more efficient and scalable development environments. Increased Agility: Mobile DevOps allows teams to be more responsive to changes in the market and user feedback. == List of Dedicated Mobile DevOps Platforms == Even though it is possible to run a mobile DevOps cycle with most of the CI/CD platforms, they may require significant effort compared to non-mobile CI/CD (e.g. you need to bring your own infrastructure or it may require "reinventing the wheel" for commonly used platforms like Jenkins). To overcome the mobile-specific challenges specified, there are certain platforms that are dedicated to the lifecycle of mobile applications. These platforms exclusively focus on DevOps processes for mobile app development and are also referred as mobile CI/CD platforms. Appcircle (Multiplatform | Cloud-based & On-premise) Visual Studio App Center (Multiplatform | Cloud-based) Xcode Cloud (Apple platforms only | Cloud-based)
Read more →
Confusion network

A confusion network (sometimes called a word confusion network or informally known as a sausage) is a natural language processing method that combines outputs from multiple automatic speech recognition or machine translation systems. Confusion networks are simple linear directed acyclic graphs with the property that each a path from the start node to the end node goes through all the other nodes. The set of words represented by edges between two nodes is called a confusion set. In machine translation, the defining characteristic of confusion networks is that they allow multiple ambiguous inputs, deferring committal translation decisions until later stages of processing. This approach is used in the open source machine translation software Moses and the proprietary translation API in IBM Bluemix Watson.
Read more →
Common data model

A common data model (CDM) can refer to any standardised data model which allows for data and information exchange between different applications and data sources. Common data models aim to standardise logical infrastructure so that related applications can "operate on and share the same data", and can be seen as a way to "organize data from many sources that are in different formats into a standard structure". A common data model has been described as one of the components of a "strong information system". A standardised common data model has also been described as a typical component of a well designed agile application besides a common communication protocol. Providing a single common data model within an organisation is one of the typical tasks of a data warehouse. == Examples of common data models == === Border crossings === X-trans.eu was a cross-border pilot project between the Free State of Bavaria (Germany) and Upper Austria with the aim of developing a faster procedure for the application and approval of cross-border large-capacity transports. The portal was based on a common data model that contained all the information required for approval. === Climate data === The Climate Data Store Common Data Model is a common data model set up by the Copernicus Climate Change Service for harmonising essential climate variables from different sources and data providers. === General information technology === Within service-oriented architecture, S-RAMP is a specification released by HP, IBM, Software AG, TIBCO, and Red Hat which defines a common data model for SOA repositories as well as an interaction protocol to facilitate the use of common tooling and sharing of data. Content Management Interoperability Services (CMIS) is an open standard for inter-operation of different content management systems over the internet, and provides a common data model for typed files and folders used with version control. The NetCDF software libraries for array-oriented scientific data implements a common data model called the NetCDF Java common data model, which consists of three layers built on top of each other to add successively richer semantics. === Health === Within genomic and medical data, the Observational Medical Outcomes Partnership (OMOP) research program established under the U.S. National Institutes of Health has created a common data model for claims and electronic health records which can accommodate data from different sources around the world. PCORnet, which was developed by the Patient-Centered Outcomes Research Institute, is another common data model for health data including electronic health records and patient claims. The Sentinel Common Data Model was initially started as Mini-Sentinel in 2008. It is used by the Sentinel Initiative of the USA's Food and Drug Administration. The Generalized Data Model was first published in 2019. It was designed to be a stand-alone data model as well as to allow for further transformation into other data models (e.g., OMOP, PCORNet, Sentinel). It has a hierarchical structure to flexibly capture relationships among data elements. The JANUS clinical trial data repository also provides a common data model which is based on the SDTM standard to represent clinical data submitted to regulatory agencies, such as tabulation datasets, patient profiles, listings, etc. === Logistics === SX000i is a specification developed jointly by the Aerospace and Defence Industries Association of Europe (ASD) and the American Aerospace Industries Association (AIA) to provide information, guidance and instructions to ensure compatibility and the commonality. The associated SX002D specification contains a common data model. === Microsoft Common Data Model === The Microsoft Common Data Model is a collection of many standardised extensible data schemas with entities, attributes, semantic metadata, and relationships, which represent commonly used concepts and activities in various businesses areas. It is maintained by Microsoft and its partners, and is published on GitHub. Microsoft's Common Data Model is used amongst others in Microsoft Dataverse and with various Microsoft Power Platform and Microsoft Dynamics 365 services. === Rail transport === RailTopoModel is a common data model for the railway sector. === Other === There are many more examples of various common data models for different uses published by different sources.
Read more →
Condensation algorithm

The condensation algorithm (Conditional Density Propagation) is a computer vision algorithm. The principal application is to detect and track the contour of objects moving in a cluttered environment. Object tracking is one of the more basic and difficult aspects of computer vision and is generally a prerequisite to object recognition. Being able to identify which pixels in an image make up the contour of an object is a non-trivial problem. Condensation is a probabilistic algorithm that attempts to solve this problem. The algorithm itself is described in detail by Isard and Blake in a publication in the International Journal of Computer Vision in 1998. One of the most interesting facets of the algorithm is that it does not compute on every pixel of the image. Rather, pixels to process are chosen at random, and only a subset of the pixels end up being processed. Multiple hypotheses about what is moving are supported naturally by the probabilistic nature of the approach. The evaluation functions come largely from previous work in the area and include many standard statistical approaches. The original part of this work is the application of particle filter estimation techniques. The algorithm's creation was inspired by the inability of Kalman filtering to perform object tracking well in the presence of significant background clutter. The presence of clutter tends to produce probability distributions for the object state which are multi-modal and therefore poorly modeled by the Kalman filter. The condensation algorithm in its most general form requires no assumptions about the probability distributions of the object or measurements. == Algorithm overview == The condensation algorithm seeks to solve the problem of estimating the conformation of an object described by a vector x t {\displaystyle \mathbf {x_{t}} } at time t {\displaystyle t} , given observations z 1 , . . . , z t {\displaystyle \mathbf {z_{1},...,z_{t}} } of the detected features in the images up to and including the current time. The algorithm outputs an estimate to the state conditional probability density p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} by applying a nonlinear filter based on factored sampling and can be thought of as a development of a Monte-Carlo method. p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is a representation of the probability of possible conformations for the objects based on previous conformations and measurements. The condensation algorithm is a generative model since it models the joint distribution of the object and the observer. The conditional density of the object at the current time p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is estimated as a weighted, time-indexed sample set { s t ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{t}^{(n)},n=1,...,N\}} with weights π t ( n ) {\displaystyle \pi _{t}^{(n)}} . N is a parameter determining the number of sample sets chosen. A realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is obtained by sampling with replacement from the set s t {\displaystyle s_{t}} with probability equal to the corresponding element of π t {\displaystyle \pi _{t}} . The assumptions that object dynamics form a temporal Markov chain and that observations are independent of each other and the dynamics facilitate the implementation of the condensation algorithm. The first assumption allows the dynamics of the object to be entirely determined by the conditional density p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} . The model of the system dynamics determined by p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} must also be selected for the algorithm, and generally includes both deterministic and stochastic dynamics. The algorithm can be summarized by initialization at time t = 0 {\displaystyle t=0} and three steps at each time t: === Initialization === Form the initial sample set and weights by sampling according to the prior distribution. For example, specify as Gaussian and set the weights equal to each other. === Iterative procedure === Sample with replacement N {\displaystyle N} times from the set { s 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{0}^{(n)},n=1,...,N\}} with probability { π 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{\pi _{0}^{(n)},n=1,...,N\}} to generate a realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} . Apply the learned dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} to each element of this new set, to generate a new set { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . To take into account the current observation z t {\displaystyle \mathbf {z_{t}} } , set π t ( n ) = p ( z t | s ( n ) ) ∑ j = 1 N p ( z t | s ( j ) ) {\displaystyle \pi _{t}^{(n)}={\frac {p(\mathbf {z_{t}} |s^{(n)})}{\sum _{j=1}^{N}p(\mathbf {z_{t}} |s^{(j)})}}} for each element { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . This algorithm outputs the probability distribution p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} which can be directly used to calculate the mean position of the tracked object, as well as the other moments of the tracked object. Cumulative weights can instead be used to achieve a more efficient sampling. == Implementation considerations == Since object-tracking can be a real-time objective, consideration of algorithm efficiency becomes important. The condensation algorithm is relatively simple when compared to the computational intensity of the Ricatti equation required for Kalman filtering. The parameter N {\displaystyle N} , which determines the number of samples in the sample set, will clearly hold a trade-off in efficiency versus performance. One way to increase efficiency of the algorithm is by selecting a low degree of freedom model for representing the shape of the object. The model used by Isard 1998 is a linear parameterization of B-splines in which the splines are limited to certain configurations. Suitable configurations were found by analytically determining combinations of contours from multiple views, of the object in different poses, and through principal component analysis (PCA) on the deforming object. Isard and Blake model the object dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} as a second order difference equation with deterministic and stochastic components: p ( x t | x t − 1 ) ∝ e − 1 2 | | B − 1 ( ( x t − x ¯ ) − A ( x t − 1 − x ¯ ) ) | | 2 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )\propto e^{-{\frac {1}{2}}||B^{-1}((\mathbf {x_{t}} -\mathbf {\bar {x}} )-A(\mathbf {x_{t-1}} -\mathbf {\bar {x}} ))||^{2})}} where x ¯ {\displaystyle \mathbf {\bar {x}} } is the mean value of the state, and A {\displaystyle A} , B {\displaystyle B} are matrices representing the deterministic and stochastic components of the dynamical model respectively. A {\displaystyle A} , B {\displaystyle B} , and x ¯ {\displaystyle \mathbf {\bar {x}} } are estimated via Maximum Likelihood Estimation while the object performs typical movements. The observation model p ( z | x ) {\displaystyle p(\mathbf {z} |\mathbf {x} )} cannot be directly estimated from the data, requiring assumptions to be made in order to estimate it. Isard 1998 assumes that the clutter which may make the object not visible is a Poisson random process with spatial density λ {\displaystyle \lambda } and that any true target measurement is unbiased and normally distributed with standard deviation σ {\displaystyle \sigma } . The basic condensation algorithm is used to track a single object in time. It is possible to extend the condensation algorithm using a single probability distribution to describe the likely states of multiple objects to track multiple objects in a scene at the same time. Since clutter can cause the object probability distribution to split into multiple peaks, each peak represents a hypothesis about the object configuration. Smoothing is a statistical technique of conditioning the distribution based on both past and future measurements once the tracking is complete in order to reduce the effects of multiple peaks. Smoothing cannot be directly done in real-time since it requires information of future measurements. == Applications == The algorithm can be used for vision-based robot localization of mobile robots. Instead of tracking the position of an object in the scene, however, the position of the camera platform is tracked. This allows the camera platform to be globally localized given a visual map of the environment. Extensions of the condensation algorithm have also been used to recognize human gestures in image sequences. This application of the condensation algorithm impacts the ran
Read more →
Non-human

Non-human (also spelled nonhuman) is any entity displaying some, but not enough, human characteristics to be considered a human. The term has been used in a variety of contexts and may refer to objects that have been developed with human intelligence, such as robots or vehicles. == Organisms == === Animal rights and personhood === In the animal rights movement, it is common to distinguish between "human animals" and "non-human animals". Participants in the animal rights movement generally recognize that non-human animals have some similar characteristics to those of human persons. For example, various non-human animals have been shown to register pain, compassion, memory, and some cognitive function. Some animal rights activists argue that the similarities between human and non-human animals justify giving non-human animals rights that human society has afforded to humans, such as the right to self-preservation, and some even wish for all non-human animals or at least those that bear a fully thinking and conscious mind, such as vertebrates and some invertebrates such as cephalopods, to be given a full right of personhood. === The non-human in philosophy === Contemporary philosophers have drawn on the work of Henri Bergson, Gilles Deleuze, Félix Guattari, and Claude Lévi-Strauss (among others) to suggest that the non-human poses epistemological and ontological problems for humanist and post-humanist ethics, and have linked the study of non-humans to materialist and ethological approaches to the study of society and culture. == Software and robots == The term non-human has been used to describe computer programs and robot-like devices that display some human-like characteristics. In both science fiction and in the real world, computer programs and robots have been built to perform tasks that require human-computer interactions in a manner that suggests sentience and compassion. There is increasing interest in the use of robots in nursing homes and to provide elder care. Computer programs have been used for years in schools to provide one-on-one education with children. The Tamagotchi toy required children to provide care, attention, and nourishment to keep it "alive".
Read more →
Normal distributions transform

The normal distributions transform (NDT) is a point cloud registration algorithm introduced by Peter Biber and Wolfgang Straßer in 2003, while working at University of Tübingen. The algorithm registers two point clouds by first associating a piecewise normal distribution to the first point cloud, that gives the probability of sampling a point belonging to the cloud at a given spatial coordinate, and then finding a transform that maps the second point cloud to the first by maximising the likelihood of the second point cloud on such distribution as a function of the transform parameters. Originally introduced for 2D point cloud map matching in simultaneous localization and mapping (SLAM) and relative position tracking, the algorithm was extended to 3D point clouds and has wide applications in computer vision and robotics. NDT is very fast and accurate, making it suitable for application to large scale data, but it is also sensitive to initialisation, requiring a sufficiently accurate initial guess, and for this reason it is typically used in a coarse-to-fine alignment strategy. == Formulation == The NDT function associated to a point cloud is constructed by partitioning the space in regular cells. For each cell, it is possible to define the mean q = 1 n ∑ i x i {\displaystyle \textstyle \mathbf {q} ={\frac {1}{n}}\sum _{i}\mathbf {x_{i}} } and covariance S = 1 n ∑ i ( x i − q ) ( x i − q ) ⊤ {\displaystyle \textstyle \mathbf {S} ={\frac {1}{n}}\sum _{i}\left(\mathbf {x} _{i}-\mathbf {q} \right)\left(\mathbf {x} _{i}-\mathbf {q} \right)^{\top }} of the n {\displaystyle n} points of the cloud x 1 , … , x n {\displaystyle \mathbf {x} _{1},\dots ,\mathbf {x} _{n}} that fall within the cell. The probability density of sampling a point at a given spatial location x {\displaystyle \mathbf {x} } within the cell is then given by the normal distribution e − 1 2 ( x − q ) ⊤ S − 1 ( x − q ) {\displaystyle e^{-{\frac {1}{2}}\left(\mathbf {x} -\mathbf {q} \right)^{\top }\mathbf {S} ^{-1}\left(\mathbf {x} -\mathbf {q} \right)}} . Two point clouds can be mapped by a Euclidean transformation f {\displaystyle f} with rotation matrix R {\displaystyle \mathbf {R} } and translation vector t {\displaystyle \mathbf {t} } f R , t ( x ) = R x + t {\displaystyle f_{\mathbf {R} ,\mathbf {t} }(\mathbf {x} )=\mathbf {R} \mathbf {x} +\mathbf {t} } that maps from the second cloud to the first, parametrised by the rotation angles and translation components. The algorithm registers the two point clouds by optimising the parameters of the transformation that maps the second cloud to the first, with respect to a loss function based on the NDT of the first point cloud, solving the following problem arg ⁡ min R , t { − ∑ i NDT ⁡ ( f R , t ( x i ) ) } {\displaystyle \arg \min _{\mathbf {R} ,\mathbf {t} }\left\{-\sum _{i}\operatorname {NDT} \left(f_{\mathbf {R} ,\mathbf {t} }\left(\mathbf {x_{i}} \right)\right)\right\}} where the loss function represents the negated likelihood, obtained by applying the transformation to all points in the second cloud and summing the value of the NDT at each transformed point f R , t ( x ) {\displaystyle f_{\mathbf {R} ,\mathbf {t} }(\mathbf {x} )} . The loss is piecewise continuous and differentiable, and can be optimised with gradient-based methods (in the original formulation, the authors use Newton's method). In order to reduce the effect of cell discretisation, a technique consists of partitioning the space into multiple overlapping grids, shifted by half cell size along the spatial directions, and computing the likelihood at a given location as the sum of the NDTs induced by each grid.
Read more →
GeneRIF

A GeneRIF or Gene Reference Into Function is a short (255 characters or fewer) statement about the function of a gene. GeneRIFs provide a simple mechanism for allowing scientists to add to the functional annotation of genes described in the Entrez Gene database. In practice, function is constructed quite broadly. For example, there are GeneRIFs that discuss the role of a gene in a disease, GeneRIFs that point the viewer towards a review article about the gene, and GeneRIFs that discuss the structure of a gene. However, the stated intent is for GeneRIFs to be about gene function. Currently over half a million geneRIFs have been created for genes from almost 1000 different species. GeneRIFs are always associated with specific entries in the Entrez Gene database. Each GeneRIF has a pointer to the PubMed ID (a type of document identifier) of a scientific publication that provides evidence for the statement made by the GeneRIF. GeneRIFs are often extracted directly from the document that is identified by the PubMed ID, very frequently from its title or from its final sentence. GeneRIFs are usually produced by NCBI indexers, but anyone may submit a GeneRIF. To be processed, a valid Gene ID must exist for the specific gene, or the Gene staff must have assigned an overall Gene ID to the species. The latter case is implemented via records in Gene with the symbol NEWENTRY. Once the Gene ID is identified, only three types of information are required to complete a submission: a concise phrase describing a function or functions (less than 255 characters in length, preferably more than a restatement of the title of the paper); a published paper describing that function, implemented by supplying the PubMed ID of a citation in PubMed; a valid e-mail address (which will remain confidential). == Example == Here are some GeneRIFs taken from Entrez Gene for GeneID 7157, the human gene TP53. The PubMed document identifiers have been omitted from the examples. Note the wide variability with respect to the presence or absence of punctuation and of sentence-initial capital letters. p53 and c-erbB-2 may have independent role in carcinogenesis of gall bladder cancer Degradation of endogenous HIPK2 depends on the presence of a functional p53 protein. p53 codon 72 alleles influence the response to anticancer drugs in cells from aged people by regulating the cell cycle inhibitor p21WAF1 Logistic regression analysis showed p53 and COX-2 as dependent predictors in pancreatic carcinogenesis, and a reciprocal relationship to neoplastic progression between p53 and COX-2. GeneRIFs are an unusual type of textual genre, and they have recently been the subject of a number of articles from the natural language processing community.
Read more →
BERT (language model)

Bidirectional encoder representations from transformers (BERT) is a language model introduced in October 2018 by researchers at Google. It learns to represent text as a sequence of vectors using self-supervised learning. It uses the encoder-only transformer architecture. BERT dramatically improved the state of the art for large language models. As of 2020, BERT is a ubiquitous baseline in natural language processing (NLP) experiments. BERT is trained by masked token prediction and next sentence prediction. With this training, BERT learns contextual, latent representations of tokens in their context, similar to ELMo and GPT-2. It found applications for many natural language processing tasks, such as coreference resolution and polysemy resolution. It improved on ELMo and spawned the study of "BERTology", which attempts to interpret what is learned by BERT. BERT was originally implemented in the English language at two model sizes, BERTBASE (110 million parameters) and BERTLARGE (340 million parameters). Both were trained on the Toronto BookCorpus (800M words) and English Wikipedia (2,500M words). The weights were released on GitHub. On March 11, 2020, 24 smaller models were released, the smallest being BERTTINY with just 4 million parameters. == Architecture == BERT is an "encoder-only" transformer architecture. At a high level, BERT consists of 4 modules: Tokenizer: This module converts a piece of English text into a sequence of integers ("tokens"). Embedding: This module converts the sequence of tokens into an array of real-valued vectors representing the tokens. It represents the conversion of discrete token types into a lower-dimensional Euclidean space. Encoder: a stack of Transformer blocks with self-attention, but without causal masking. Task head: This module converts the final representation vectors into one-shot encoded tokens again by producing a predicted probability distribution over the token types. It can be viewed as a simple decoder, decoding the latent representation into token types, or as an "un-embedding layer". The task head is necessary for pre-training, but it is often unnecessary for so-called "downstream tasks," such as question answering or sentiment classification. Instead, one removes the task head and replaces it with a newly initialized module suited for the task, and finetune the new module. The latent vector representation of the model is directly fed into this new module, allowing for sample-efficient transfer learning. === Embedding === This section describes the embedding used by BERTBASE. The other one, BERTLARGE, is similar, just larger. The tokenizer of BERT is WordPiece, which is a sub-word strategy like byte-pair encoding. Its vocabulary size is 30,000, and any token not appearing in its vocabulary is replaced by [UNK] ("unknown"). The first layer is the embedding layer, which contains three components: token type embeddings, position embeddings, and segment type embeddings. Token type: The token type is a standard embedding layer, translating a one-hot vector into a dense vector based on its token type. Position: The position embeddings are based on a token's position in the sequence. BERT uses absolute position embeddings, where each position in a sequence is mapped to a real-valued vector. Each dimension of the vector consists of a sinusoidal function that takes the position in the sequence as input. Segment type: Using a vocabulary of just 0 or 1, this embedding layer produces a dense vector based on whether the token belongs to the first or second text segment in that input. In other words, type-1 tokens are all tokens that appear after the [SEP] special token. All prior tokens are type-0. The three embedding vectors are added together representing the initial token representation as a function of these three pieces of information. After embedding, the vector representation is normalized using a LayerNorm operation, outputting a 768-dimensional vector for each input token. After this, the representation vectors are passed forward through 12 Transformer encoder blocks, and are decoded back to 30,000-dimensional vocabulary space using a basic affine transformation layer. === Architectural family === The encoder stack of BERT has 2 free parameters: L {\displaystyle L} , the number of layers, and H {\displaystyle H} , the hidden size. There are always H / 64 {\displaystyle H/64} self-attention heads, and the feed-forward/filter size is always 4 H {\displaystyle 4H} . By varying these two numbers, one obtains an entire family of BERT models. For BERT: the feed-forward size and filter size are synonymous. Both of them denote the number of dimensions in the middle layer of the feed-forward network. the hidden size and embedding size are synonymous. Both of them denote the number of real numbers used to represent a token. The notation for encoder stack is written as L/H. For example, BERTBASE is written as 12L/768H, BERTLARGE as 24L/1024H, and BERTTINY as 2L/128H. == Training == === Pre-training === BERT was pre-trained simultaneously on two tasks: Masked language modeling (MLM): In this task, BERT ingests a sequence of words, where one word may be randomly changed ("masked"), and BERT tries to predict the original words that had been changed. For example, in the sentence "The cat sat on the [MASK]," BERT would need to predict "mat." This helps BERT learn bidirectional context, meaning it understands the relationships between words not just from left to right or right to left but from both directions at the same time. Next sentence prediction (NSP): In this task, BERT is trained to predict whether one sentence logically follows another. For example, given two sentences, "The cat sat on the mat" and "It was a sunny day", BERT has to decide if the second sentence is a valid continuation of the first one. This helps BERT understand relationships between sentences, which is important for tasks like question answering or document classification. ==== Masked language modeling ==== In masked language modeling, 15% of tokens would be randomly selected for masked-prediction task, and the training objective was to predict the masked token given its context. In more detail, the selected token is: replaced with a [MASK] token with probability 80%, replaced with a random word token with probability 10%, not replaced with probability 10%. The reason not all selected tokens are masked is to avoid the dataset shift problem. The dataset shift problem arises when the distribution of inputs seen during training differs significantly from the distribution encountered during inference. A trained BERT model might be applied to word representation (like Word2Vec), where it would be run over sentences not containing any [MASK] tokens. It is later found that more diverse training objectives are generally better. As an illustrative example, consider the sentence "my dog is cute". It would first be divided into tokens like "my1 dog2 is3 cute4". Then a random token in the sentence would be picked. Let it be the 4th one "cute4". Next, there would be three possibilities: with probability 80%, the chosen token is masked, resulting in "my1 dog2 is3 [MASK]4"; with probability 10%, the chosen token is replaced by a uniformly sampled random token, such as "happy", resulting in "my1 dog2 is3 happy4"; with probability 10%, nothing is done, resulting in "my1 dog2 is3 cute4". After processing the input text, the model's 4th output vector is passed to its decoder layer, which outputs a probability distribution over its 30,000-dimensional vocabulary space. ==== Next sentence prediction ==== Given two sentences, the model predicts if they appear sequentially in the training corpus, outputting either [IsNext] or [NotNext]. During training, the algorithm sometimes samples two sentences from a single continuous span in the training corpus, while at other times, it samples two sentences from two discontinuous spans. The first sentence starts with a special token, [CLS] (for "classify"). The two sentences are separated by another special token, [SEP] (for "separate"). After processing the two sentences, the final vector for the [CLS] token is passed to a linear layer for binary classification into [IsNext] and [NotNext]. For example: Given "[CLS] my dog is cute [SEP] he likes playing [SEP]", the model should predict [IsNext]. Given "[CLS] my dog is cute [SEP] how do magnets work [SEP]", the model should predict [NotNext]. === Fine-tuning === BERT is meant as a general pretrained model for various applications in natural language processing. That is, after pre-training, BERT can be fine-tuned with fewer resources on smaller datasets to optimize its performance on specific tasks such as natural language inference and text classification, and sequence-to-sequence-based language generation tasks such as question answering and conversational response generation. The original BERT paper published results demonstrating that a small amount of fine
Read more →
Semantic analytics

Semantic analytics, also termed semantic relatedness, is the use of ontologies to analyze content in web resources. This field of research combines text analytics and Semantic Web technologies like RDF. Semantic analytics measures the relatedness of different ontological concepts. Some academic research groups that have active project in this area include Kno.e.sis Center at Wright State University among others. == History == An important milestone in the beginning of semantic analytics occurred in 1996, although the historical progression of these algorithms is largely subjective. In his seminal study publication, Philip Resnik established that computers have the capacity to emulate human judgement. Spanning the publications of multiple journals, improvements to the accuracy of general semantic analytic computations all claimed to revolutionize the field. However, the lack of a standard terminology throughout the late 1990s was the cause of much miscommunication. This prompted Budanitsky & Hirst to standardize the subject in 2006 with a summary that also set a framework for modern spelling and grammar analysis. In the early days of semantic analytics, obtaining a large enough reliable knowledge bases was difficult. In 2006, Strube & Ponzetto demonstrated that Wikipedia could be used in semantic analytic calculations. The usage of a large knowledge base like Wikipedia allows for an increase in both the accuracy and applicability of semantic analytics. == Methods == Given the subjective nature of the field, different methods used in semantic analytics depend on the domain of application. No singular methods is considered correct, however one of the most generally effective and applicable method is explicit semantic analysis (ESA). ESA was developed by Evgeniy Gabrilovich and Shaul Markovitch in the late 2000s. It uses machine learning techniques to create a semantic interpreter, which extracts text fragments from articles into a sorted list. The fragments are sorted by how related they are to the surrounding text. Latent semantic analysis (LSA) is another common method that does not use ontologies, only considering the text in the input space. == Applications == Entity linking Ontology building / knowledge base population Search and query tasks Natural language processing Spoken dialog systems (e.g., Amazon Alexa, Google Assistant, Microsoft's Cortana) Artificial intelligence Knowledge management The application of semantic analysis methods generally streamlines organizational processes of any knowledge management system. Academic libraries often use a domain-specific application to create a more efficient organizational system. By classifying scientific publications using semantics and Wikipedia, researchers are helping people find resources faster. Search engines like Semantic Scholar provide organized access to millions of articles.
Read more →
Arabic Ontology

Arabic Ontology is a website offering linguistic ontology services for the Arabic language which can be used like the online site WordNet. Users can use Arabic Ontology to classify or clarify the concepts and meanings of Arabic terms. == Ontology Structure == The ontology structure (i.e., data model) is similar to WordNet's structure. Each concept in the database is given a unique concept identifier (URI), informally described by a gloss, and lexicalized by one or more synonymous lemma terms. Each term-concept pair is called a sense, and is given a SenseID. A set of senses is called synset. Concepts and senses are described by further attributes such as era and area — to specify example usage and ontological analysis. Semantic relations are defined between concepts. Some important entities are included in the ontology, such as individual countries and bodies of water. These individuals are given separate IndividualIDs and linked with their concepts through the InstanceOf relation. == Mappings to other resources == Concepts in the Arabic Ontology are mapped to synsets in WordNet, as well as to BFO and DOLCE. Terms used in the Arabic Ontology are mapped to lemmas in the LDC's SAMA database. == Applications == Arabic Ontology can be used in many application domains, such as: Information retrieval, to enrich queries (e.g., in search engines) and improve the quality of the results, i.e. meaningful search rather than string-matching search; Machine translation and word-sense disambiguation, by finding the exact mapping of concepts across languages, especially that the Arabic ontology is also mapped to the WordNet; Data Integration and interoperability in which the Arabic ontology can be used as a semantic reference to link databases and information systems; Semantic Web and Web 3.0, by using the Arabic ontology as a semantic reference to disambiguate the meanings used in websites; among many other applications. == URLs Design == The URLs in the Arabic Ontology are designed according to the W3C's Best Practices for Publishing Linked Data, as described in the following URL schemes. This allows one to also explore the whole database like exploring a graph: Ontology Concept: Each concept in the Arabic Ontology has a ConceptID and can be accessed using: https://{domain}/concept/{ConceptID | Term}. In case of a term, the set of concepts that this term lexicalizes are all retrieved. In case of a ConceptID, the concept and its direct subtypes are retrieved, e.g. https://ontology.birzeit.edu/concept/293198 Semantic relations: Relationships between concepts can be accessed using these schemes: (i) the URL: https:// {domain}/concept/{RelationName}/{ConceptID} allows retrieval of relationships among ontology concepts. (ii) the URL: https://{domain}/lexicalconcept/{RelationName}/{lexicalConceptID} allows retrieval of relations between lexical concepts. For example, https://ontology.birzeit.edu/concept/instances/293121 retrieves the instances of the concept 293121. The relations that are currently used in our database are: {subtypes, type, instances, parts, related, similar, equivalent}.
Read more →
Bottlenose (company)

Bottlenose.com, also known as Bottlenose, is an enterprise trend intelligence company that analyzes big data and business data to detect trends for brands. It helps Fortune 500 enterprises discover, and track emerging trends that affect their brands. The company uses natural language processing, sentiment analysis, statistical algorithms, data mining, and machine learning heuristics to determine trends, and has a search engine that gathers information from social networks. KPMG Capital has invested a "substantial amount" in the company. Bottlenose processed 72 billion messages per day, in real-time, from across social and broadcast media, as of December 2014. == History == The company is based in Los Angeles, CA. Bottlenose is a real-time trend intelligence tool that measures social media campaigns and trends. The company also provides a free version of its Sonar tool that shows real-time trends across social media. In October 2012, the company received $1 million of funding from ff Venture Capital and Prosper Capital. By 2014, the company raised about $7 million in funding. In December 2014, KPMG Capital announced further investment in the company. In February 2015, the company confirmed it had raised $13.4 million in Series B funding led by KPMG Capital. Bottlenose partnered with the nonprofit No Labels during the 2014 State of the Union Address to analyze Twitter conversations for bipartisanship. The company also partnered with media monitoring company Critical Mention to analyze broadcast analytics. The Bottlenose Nerve Center integrated with the Critical Mention API to analyze real-time trends in television and radio broadcasts. In June 2014, Bottlenose updated its trend detection product to Nerve Center 2.0. It creates a newsfeed to show changes in trends and sends alerts when trends occur. It also has "emotion detection," which will display the emotions associated with specific comments on trending topics. In 2016, Bottlenose released its Nerve Center 3.0 platform, which was designed to automate the work of data scientists and lower the cost of artificial intelligence for businesses.
Read more →
ByLock

ByLock was a smartphone application that allowed users to communicate via a private, encrypted connection. It was launched in March 2014 on Google Play, Apple App Store The app was downloaded over 600,000 times from its launch in April 2014 until March 2016, when it was permanently shut down. The Turkish National Intelligence Organization (Turkish: Millî İstihbarat Teşkilatı, MİT) stated that the app was downloaded mainly in Turkey and the users were “Fetullahist Terror Organisation (FETÖ) which was formerly known as “Gülen movement” members. == Gülen Movement controversy == In Turkey, possession of the app is deemed evidence of membership in the Gülen Movement, which was allegedly connected to the failed Turkish coup d'état attempt in July 2016. Users of ByLock were deemed terrorists in Turkish courts. According to Deutsche Welle, of the 215,000 former ByLock users, an estimated 23,000 have been detained by Turkish authorities. Some believe that the MİT and other Turkish authorities manipulated the ByLock database in order to arrest suspected members of the Gülen Movement. Tuncay Beşikçi, a computer forensic expert in Turkey, emphasized that "the demands to investigate and analyze ByLock data from independent institutions are refused by the Turkish courts. But it is not normal". Tuncay Beşikçi believes that this application is precisely one of the channels for Gülen molecules to communicate and can also monitor the activities of other members of the organization. He also stated that the developers behind the Mor Beyin app, deliberately set a plan in motion that would put thousands of innocent people in prison as a cover for the Gülen movement. In December 2017, Turkish authorities revealed that almost half the people who had been prosecuted for having ByLock on their smartphones would have their legal cases reviewed, as they could have been redirected to the app without their knowledge. Following the failed coup attempt on 15 July 2016, the use of the ByLock messaging application by members of the Gülen Movement was the sole evidence in investigations and prosecutions to justify arrests and convictions for "membership in an armed terrorist organization." However, these decisions have been considered human rights violations by the European Court of Human Rights (ECHR), the United Nations Human Rights Committee, and the UN Working Group on Arbitrary Detention. Some of the relevant decisions include the following: === Decisions of the European Court of Human Rights === On 20 July 2021, in the case of Tekin Akgün v. Turkey, the European Court of Human Rights (ECHR) ruled that the use of the ByLock messaging application, unless supported by other evidence, does not create a reasonable suspicion of a crime. Based on this reasoning, the court found that the detention order violated Article 5 of the European Convention on Human Rights, which protects the right to liberty and security. In the Yüksel Yalçınkaya v. Turkey decision on 26 September 2023, the European Court of Human Rights (ECHR) examined an appeal against a conviction based on the use of ByLock. The Court ruled that the failure to provide an opportunity to challenge the authenticity of the ByLock data violated the right to a fair trial (Article 6 of the ECHR). The Court also stated that the mere use of ByLock could not be considered sufficient evidence for membership in an armed terrorist organization. It further noted that local courts had established an automatic presumption of guilt based solely on ByLock use, creating a broad and unpredictable interpretation of the law, making it nearly impossible for the accused to exonerate themselves. Therefore, the Court concluded that the conviction based on the use of ByLock violated the principle of no punishment without law (Article 7 of the ECHR). On 22 July 2025, in the Demirhan and 238 Others case, the European Court of Human Rights (ECHR) consolidated the applications of 239 individuals who had been convicted of "membership in an armed terrorist organization" based on their use of ByLock, as determined by 239 separate courts in Turkey. The Court ruled that the convictions violated the right to a fair trial under Article 6 and the principle of no punishment without law under Article 7 of the European Convention on Human Rights (ECHR). The ruling stated that the Turkish courts' "categorical approach" to the use of ByLock lacked legal foundation. In this context, it was emphasized that anyone who had used ByLock could not be convicted of membership in an armed terrorist organization based solely on this reasoning. The ruling also stated that, due to the large number of similar applications, the issue was "systemic in nature" and it called for a national solution to be developed by Turkey. While the Court did not order compensation for the 239 applicants, it emphasized that reopening the trial to ensure the enforcement of the violation ruling was the most appropriate remedy. This ruling, which confirms the violation finding in the Yüksel Yalçınkaya case of 26 September 2023, is considered a continuation of the ECHR's case law concerning trials based on ByLock evidence. === Decisions of the United Nations Human Rights Committee and Working Group === In the İsmet Özçelik and Turgay Karaman v. Turkey decision, dated 28 May 2019 (Application No. 2980/2017), the UN Human Rights Committee ruled that the use of ByLock and allegations of depositing money into Bank Asya could not justify the applicants' arrests. In the Mestan Yayman v. Turkey decision (Opinion No. 42/2018 – 21 August 2018) by the UN Human Rights Council Working Group on Arbitrary Detention, it was stated that using a public messaging application like ByLock cannot be considered criminal evidence, and that the use of such an application falls under the scope of freedom of thought and expression. The dozens of decisions later issued by the UN Human Rights Council Working Group are of the same nature.
Read more →
Qapital

Qapital is a personal finance mobile application (app) for the iOS and Android operating systems, developed by Qapital, LLC. The app is designed to motivate users to save money through a gamification of their spending behavior. It moves money from a user's checking account to a separate Qapital account, when certain rules are triggered. Its database is used by psychology professor Dan Ariely to study consumer behavior. Qapital was released in Sweden in 2013, then in the US in early 2015. The application was later withdrawn from the Swedish market in April 2015, in order to focus on the US market. == History == The idea for Qapital was conceived by ex-bankers in Sweden. The software was designed by twin brothers Daniel and Andreas Källbom of Studio Källbom and released in Sweden in December 2013. The original software was a personal finance dashboard, similar to Mint.com, to show its users how they spent their money. Qapital introduced the app into the US market with a different design in 2014 and started focusing exclusively on the US market. The app was re-designed to focus on building savings rather than managing personal finances. The Swedish version shut down in April 2015. The app was initially restricted to the iOS platform, but an Android version was released at the end of 2015. Shortly after its US launch, Qapital invited psychology professor Dan Ariely to join its team as its "chief behavioral economist". He uses the app's database to conduct research into behavioral economics and Qapital in turn uses Ariely's research in design and programming decisions. In 2017, Qapital added checking and debit card services to the app. == Concept and features == Qapital is a free personal finance app for iOS and Android devices, intended to encourage its users to save money. Qapital directs each of its users to set savings goals, then automatically transfers money from their checking account to an account for savings, when a rule established in the app is met. It uses the "if this then that" (IFTTT) rule-based web-service. For example, one rule could be that if a user purchases a cup of coffee, then the app will round up the charge to the nearest dollar and deposit the difference into savings. Users connect their bank accounts to Qapital, so it knows when purchases are made. When a rule is met, money for savings are transferred to a Qapital account operated in partnership with Lincoln Savings Bank. As of 2015, Qapital can connect to more than 180 other apps, such as Facebook, Twitter, Dropbox and Instagram. For example, connecting to Jawbone allows the user to set a rule that if they take a certain number of steps during the day, a set amount of money is transferred to savings. The app also allows users to monitor activity among their other financial accounts, such as deposits and withdrawals. == Reception == In an October 2015 review, PC Magazine gave Qapital four out of five marks and an editor rating of "excellent." The review praised the app for having a "lovely design" and criticized it for being a, "bit simplistic in some of its rules." Bankrate, in a May 2015 review, gave the app a score of 3/5 for "ease of use," 5/5 for "features," 4/5 for "effectiveness," 4/5 for "value," for a total score of 16/20. The reviewer criticized Qapital's savings account for providing a low-interest rate, but concluded that its numerous features make the app "intriguing" and "it would be difficult to find a standard bank app more fun to use than Qapital."
Read more →
Mean shift

Mean shift is a non-parametric feature-space mathematical analysis technique for locating the maxima of a density function, a so-called mode-seeking algorithm. Application domains include cluster analysis in computer vision and image processing. == History == The mean shift procedure is usually credited to work by Fukunaga and Hostetler in 1975. It is, however, reminiscent of earlier work by Schnell in 1964. == Overview == Mean shift is a procedure for locating the maxima—the modes—of a density function given discrete data sampled from that function. This is an iterative method, and we start with an initial estimate x {\displaystyle x} . Let a kernel function K ( x i − x ) {\displaystyle K(x_{i}-x)} be given. This function determines the weight of nearby points for re-estimation of the mean. Typically a Gaussian kernel on the distance to the current estimate is used, K ( x i − x ) = e − c | | x i − x | | 2 {\displaystyle K(x_{i}-x)=e^{-c||x_{i}-x||^{2}}} . The weighted mean of the density in the window determined by K {\displaystyle K} is m ( x ) = ∑ x i ∈ N ( x ) K ( x i − x ) x i ∑ x i ∈ N ( x ) K ( x i − x ) {\displaystyle m(x)={\frac {\sum _{x_{i}\in N(x)}K(x_{i}-x)x_{i}}{\sum _{x_{i}\in N(x)}K(x_{i}-x)}}} where N ( x ) {\displaystyle N(x)} is the neighborhood of x {\displaystyle x} , a set of points for which K ( x i − x ) ≠ 0 {\displaystyle K(x_{i}-x)\neq 0} . The difference m ( x ) − x {\displaystyle m(x)-x} is called mean shift in Fukunaga and Hostetler. The mean-shift algorithm now sets x ← m ( x ) {\displaystyle x\leftarrow m(x)} , and repeats the estimation until m ( x ) {\displaystyle m(x)} converges. Although the mean shift algorithm has been widely used in many applications, a rigid proof for the convergence of the algorithm using a general kernel in a high dimensional space is still not known. Aliyari Ghassabeh showed the convergence of the mean shift algorithm in one dimension with a differentiable, convex, and strictly decreasing profile function. However, the one-dimensional case has limited real world applications. Also, the convergence of the algorithm in higher dimensions with a finite number of the stationary (or isolated) points has been proved. However, sufficient conditions for a general kernel function to have finite stationary (or isolated) points have not been provided. Gaussian Mean-Shift is an Expectation–maximization algorithm. == Details == Let data be a finite set S {\displaystyle S} embedded in the n {\displaystyle n} -dimensional Euclidean space, X {\displaystyle X} . Let K {\displaystyle K} be a flat kernel that is the characteristic function of the λ {\displaystyle \lambda } -ball in X {\displaystyle X} , In each iteration of the algorithm, s ← m ( s ) {\displaystyle s\leftarrow m(s)} is performed for all s ∈ S {\displaystyle s\in S} simultaneously. The first question, then, is how to estimate the density function given a sparse set of samples. One of the simplest approaches is to just smooth the data, e.g., by convolving it with a fixed kernel of width h {\displaystyle h} , where x i {\displaystyle x_{i}} are the input samples and k ( r ) {\displaystyle k(r)} is the kernel function (or Parzen window). h {\displaystyle h} is the only parameter in the algorithm and is called the bandwidth. This approach is known as kernel density estimation or the Parzen window technique. Once we have computed f ( x ) {\displaystyle f(x)} from the equation above, we can find its local maxima using gradient ascent or some other optimization technique. The problem with this "brute force" approach is that, for higher dimensions, it becomes computationally prohibitive to evaluate f ( x ) {\displaystyle f(x)} over the complete search space. Instead, mean shift uses a variant of what is known in the optimization literature as multiple restart gradient descent. Starting at some guess for a local maximum, y k {\displaystyle y_{k}} , which can be a random input data point x 1 {\displaystyle x_{1}} , mean shift computes the gradient of the density estimate f ( x ) {\displaystyle f(x)} at y k {\displaystyle y_{k}} and takes an uphill step in that direction. == Types of kernels == Kernel definition: Let X {\displaystyle X} be the n {\displaystyle n} -dimensional Euclidean space, R n {\displaystyle \mathbb {R} ^{n}} . The norm of x {\displaystyle x} is a non-negative number, ‖ x ‖ 2 = x ⊤ x ≥ 0 {\displaystyle \|x\|^{2}=x^{\top }x\geq 0} . A function K : X → R {\displaystyle K:X\rightarrow \mathbb {R} } is said to be a kernel if there exists a profile, k : [ 0 , ∞ ] → R {\displaystyle k:[0,\infty ]\rightarrow \mathbb {R} } , such that K ( x ) = k ( ‖ x ‖ 2 ) {\displaystyle K(x)=k(\|x\|^{2})} and k is non-negative. k is non-increasing: k ( a ) ≥ k ( b ) {\displaystyle k(a)\geq k(b)} if a < b {\displaystyle a Read more →
Brave Leo

Brave Leo is a large language model-based chatbot developed by Brave Software and included with the Brave browser. == History == In November 2023, the company said versions for iOS and Android would be available "in the coming months". == Features == Since January 2024, Leo has used the open-source Mixtral 8x7B from Mistral AI as its default large language model, in addition to LLaMA 2 from Meta Platforms and Claude from Anthropic, both of which have been used previously. Leo can suggest follow-up questions, and summarize webpages, PDFs, and videos. Leo has a $15 (US) per month premium version that enables more requests and uses larger LLMs. == Privacy == The answers given by Leo are not saved. Brave uses the slogan Love Privacy to emphasize its focus on user privacy and data protection. The phrase has been featured in Brave's official marketing campaigns and has been cited in media coverage of the browser's privacy-first approach. == Controversies == In 2023, PC World reported that Leo evades questions about US elections.
Read more →