AI Content To Human

AI Content To Human — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Deep tomographic reconstruction

  Deep Tomographic Reconstruction is a set of methods for using deep learning methods to perform tomographic reconstruction of medical and industrial images. It uses artificial intelligence and machine learning, especially deep artificial neural networks or deep learning, to overcome challenges such as measurement noise, data sparsity, image artifacts, and computational inefficiency. This approach has been applied across various imaging modalities, including CT, MRI, PET, SPECT, ultrasound, and optical imaging == Historical background == Traditional tomographic reconstruction relies on analytic methods such as filtered back-projection, or iterative methods which incrementally compute inverse transformations from measurement data (e.g., Radon or Fourier transform data). However, these approaches are not sufficient for certain imaging techniques such as low-dose CT and fast MRI, or scenarios involving metal artifacts and patient motion. == Use in imaging modalities == === Computed tomography (CT) === In CT, deep learning models can be particularly effective in reducing radiation exposure while maintaining image quality. Deep neural networks can also be able to reconstruct images of fair quality from sparsely sampled data without sacrificing diagnostic performance. Deep learning-based generative AI models can reduce CT metal artifacts. === Magnetic resonance imaging (MRI) === In magnetic resonance imaging (MRI), deep learning can lead to reduced MRI motion artifacts, and increased acquisition speed, referred to as fast MRI. Despite suffering from disadvantages such as lower signal-to-noise ratio (SNR), deep learning can enhance image quality in low field MRI, making these systems clinically viable. === Positron emission tomography (PET) and single-photon emission CT (SPECT) === For PET imaging, deep learning models can provide substantial improvements in low-dose imaging and motion artifact correction. Also, deep learning can help SPECT for generation of attenuation background. A notable technique for PET denoising involves integrating MR data through multimodal networks, which use anatomical information from MRI to enhance PET image quality. === Ultrasound imaging === Deep learning can enhance ultrasound imaging by reducing speckle noise and motion blur. For ultrasound beamforming, deep neural networks can allow superior image quality with limited data at high speed. === Optical imaging and microscopy === Diffuse optical tomography, optical coherence tomography and microscopy can be improved by deep neural networks beyond traditional methods. Furthermore, deep learning can also enhance Photoacoustic imaging (see Deep learning in photoacoustic imaging), addressing challenges like high noise, low contrast, and limited resolution. Deep learning has also been applied to label-free live-cell imaging, where convolutional neural networks predict fluorescence labels from transmitted light images, a technique known as in silico labeling. This method can enable high-throughput, non-invasive cell analysis and phenotyping without the need for traditional fluorescent dyes.

  Read more →
• 

  Trigger list

  Trigger list in its most general meaning refers to a list whose items are used to initiate ("trigger") certain actions. == United States: Private financial information == In the United States, when a person applies for a mortgage loan, the lender makes a credit inquiry about the potential borrower from the national credit bureaus, Equifax, Experian and TransUnion. Unless the borrower is opted out, the credit bureaus put the applicants onto a "trigger list" of "leads" about persons who are interested in new loans. These lists are sold to numerous lenders all over the United States, and soon after the application the applicant starts receiving offers from all parts of the country. The trigger lists contain a significant amount of personal financial information. Among the buyers of trigger lists are "lead generators" which resell filtered information to borrowers, e.g., of people who live in a certain area and have a certain credit score. While the Federal Trade Commission considers the market of "trigger lists" to be a legal business, many people and organizations (such as the National Association of Mortgage Brokers) consider this a serious breach of privacy and lobby for putting this practice under regulatory controls. As of now, American consumers may opt-out from "trigger lists" by calling 1-888-5-OPTOUT (1-888-567-8688). == Nuclear non-proliferation == The Zangger Committee and the Nuclear Suppliers Group maintain lists of items that may contribute to nuclear proliferation; The nuclear non-proliferation treaty forbids its members to export such items to non-treaty members. these items are said to trigger the countries' responsibilities under the NPT, hence the name.

  Read more →
• 

  Tandem (app)

  Tandem is a mobile language exchange and language learning app. == History == Tandem was founded in Hannover, Germany in 2014 by Arnd Aschentrup, Tobias Dickmeis, and Matthias Kleimann. Prior to founding Tandem, the trio had launched Vive, a members-only mobile video chat platform. Tandem has been criticised for not accepting members into the community immediately, as opposed to competitors including HelloTalk, Speaky or Cafehub. In some countries, there is a waiting list and applicants can wait up to seven days for their application to be processed by human moderators. In 2015, Tandem completed its first funding round (seed funding) of €600,000. Participating investors included business angels such as Atlantic Labs (Christophe Maire), Hannover Beteiligungsfonds, Marcus Englert (Chairman of the Supervisory Board of Rocket Internet SE ), Catagonia, Ludwig zu Salm, Florian Langenscheidt, Heiko Hubertz, Martin Sinner, and Zehden Enterprises. In 2016, the company received a further €2 million from new investors Rubylight and Faber Ventures, as well as from existing investors Hannover Beteiligungsfonds, Atlantic Labs, and Zehden Enterprises. Since 2018, the premium membership Tandem Pro has been available, which offers members unlimited access to all language learning features of the app as well as the removal of advertising for a monthly fee.

  Read more →
• 

  Colour banding

  Colour banding is a subtle form of posterisation in digital images, caused by the colour of each pixel being rounded to the nearest of the digital colour levels. While posterisation is often done for artistic effect, colour banding is an undesired artefact. In 24-bit colour modes, 8 bits per channel is usually considered sufficient to render images in Rec. 709 or sRGB. However the eye can see the difference between the colour levels, especially when there is a sharp border between two large areas of adjacent colour levels. This will happen with gradual gradients (like sunsets, dawns or clear blue skies), and also when blurring an image a large amount. Colour banding is more noticeable with fewer bits per pixel (BPP) at 16–256 colours (4–8 BPP), where there are fewer shades with a larger difference between them. The appearance of colour banding is exaggerated by the Mach bands effect. Possible solutions include the introduction of dithering and increasing the number of bits per colour channel. Because the banding comes from limitations in the presentation of the image, blurring the image does not fix this unless the image BPP is higher than the original.

  Read more →
• 

  TAPPS2

  TAPPS2 (Technische Alternative Planungs- und Programmier-System) is a tool used for developing the program logic for the universal, heating and solar thermal controllers by Austrian manufacturer Technische Alternative. Its primary usecase is defining the exact reaction of the controller to a certain event. Other than its predecessor, TAPPS, which could only be used to program controllers of type UVR1611, TAPPS2 is mainly used to program the UVR16x2 and RSM610 controllers, as well as several extension modules. == Development == Development in TAPPS2 is done on a vector-based drawing surface using components that can be placed via drag and drop. The components, which can be separated into inputs, functions and outputs are then being connected according to their individual features. Available components vary according to the current solar thermal control unit.

  Read more →
• 

  Rejoyn

  Rejoyn is a prescription-only digital therapeutic smartphone app approved by the US FDA for the treatment of major depressive disorder (MDD) in adults ages 22 and up. It is prescribed in conjunction with standard antidepressant medication and professional guidance and support. Rejoyn was developed by Click Therapeutics and Otsuka America Pharmaceutical Inc., and gained FDA clearance as a "medical device" on March 30th, 2024. The smartphone app helps patients with depression using exercises based on cognitive behavioral therapy (CBT) along with timed notifications to keep the patient engaged and in treatment. Randomized controlled trials showed that the Rejoyn app was more effective at relieving depression symptoms compared to a "sham app", a placebo app that required similar effort but was not intended to be helpful. Dr. John Torous, MD, MBI,[a] a psychiatrist at the Beth Israel Deaconess Medical Center in Boston, said that the app seems to pose minimal risks, and is an important step forward in unlocking the power of smartphones in treating psychiatric disorders. Some experts have signaled that the claims should be taken with caution, since the app was "tested only in a narrow subset of patients." and its benefits are "not statistically significant," according to the study’s primary outcome."

  Read more →
• 

  Trigger list

  Trigger list in its most general meaning refers to a list whose items are used to initiate ("trigger") certain actions. == United States: Private financial information == In the United States, when a person applies for a mortgage loan, the lender makes a credit inquiry about the potential borrower from the national credit bureaus, Equifax, Experian and TransUnion. Unless the borrower is opted out, the credit bureaus put the applicants onto a "trigger list" of "leads" about persons who are interested in new loans. These lists are sold to numerous lenders all over the United States, and soon after the application the applicant starts receiving offers from all parts of the country. The trigger lists contain a significant amount of personal financial information. Among the buyers of trigger lists are "lead generators" which resell filtered information to borrowers, e.g., of people who live in a certain area and have a certain credit score. While the Federal Trade Commission considers the market of "trigger lists" to be a legal business, many people and organizations (such as the National Association of Mortgage Brokers) consider this a serious breach of privacy and lobby for putting this practice under regulatory controls. As of now, American consumers may opt-out from "trigger lists" by calling 1-888-5-OPTOUT (1-888-567-8688). == Nuclear non-proliferation == The Zangger Committee and the Nuclear Suppliers Group maintain lists of items that may contribute to nuclear proliferation; The nuclear non-proliferation treaty forbids its members to export such items to non-treaty members. these items are said to trigger the countries' responsibilities under the NPT, hence the name.

  Read more →
• 

  Visual hull

  A visual hull is a geometric entity created by shape-from-silhouette 3D reconstruction technique introduced by A. Laurentini. This technique assumes the foreground object in an image can be separated from the background. Under this assumption, the original image can be thresholded into a foreground/background binary image, which we call a silhouette image. The foreground mask, known as a silhouette, is the 2D projection of the corresponding 3D foreground object. Along with the camera viewing parameters, the silhouette defines a back-projected generalized cone that contains the actual object; this cone is called a silhouette cone. The intersection of the two silhouette cones defines a visual hull. which is a bounding geometry of the actual 3D object. When the reconstructed geometry is only used for rendering from a different viewpoint, the implicit reconstruction together with rendering can be done using graphics hardware. == In two dimensions == A technique used in some modern touchscreen devices employs cameras placed in the corners situated opposite infrared LEDs. The one-dimensional projection (shadow) of objects on the surface may be used to reconstruct the convex hull of the object. Visual hull generation method has also been used within experimental tele-meeting systems that aim to allow a user in a remote location to interact with virtual objects. The method uses multiple cameras to capture the real-world movements and interactions of the "sender", employing hardware-accelerated volumetric visual hull representation to create 3D volume from 2D multi-view images. Its ultimate aim is to allow 3D collaboration between the two users in the virtual realm, with the visual hull technique reducing the computational power required to allow this type of interaction and enabling the use of consumer goods such as the Wii Remote as a tool for interaction.

  Read more →
• 

  Shell Control Box

  Shell Control Box (SCB) is a network security appliance that controls privileged access to remote IT systems, records activities in replayable audit trails, and prevents malicious actions. For example, it records as a system administrator updates a file server or a third-party network operator configures a router. The recorded audit trails can be replayed like a movie to review the events as they occurred. The content of the audit trails is indexed to make searching for events and automatic reporting possible. SCB is a Linux-based device developed by Balabit. It is an application level proxy gateway. In 2017, Balabit changed the name of the product to Privileged Session Management (PSM) and repositioned it as the core module of its Privileged Access Management solution. == Main Features == Balabit’s Privileged Session Management (PSM), Shell Control Box (SCB) is a device that controls, monitors, and audits remote administrative access to servers and network devices. It is a tool to oversee system administrators by controlling the encrypted connections used for administration. PSM (SCB) has full control over the SSH, RDP, Telnet, TN3270, TN5250, Citrix ICA, and VNC connections, providing a framework (with solid boundaries) for the work of the administrators. === Gateway Authentication === PSM (SCB) acts as an authentication gateway, enforcing strong authentication before users access IT assets. PSM can also integrate to user directories (for example, a Microsoft Active Directory) to resolve the group memberships of the users who access the protected servers. Credentials for accessing the server are retrieved transparently from PSM’s credential store or a third-party password management system by PSM impersonating the authenticated user. This automatic password retrieval protects the confidentiality of passwords as users can never access them. === Access Control === PSM controls and audits privileged access over the most wide-spread protocols such as SSH, RDP, or HTTP(s). The detailed access management helps to control who can access what and when on servers. It is also possible to control advanced features of the protocols, like the type of channels permitted. For example, unneeded channels like file transfer or file sharing can be disabled, reducing the security risk on the server. With PSM policies for privileged access can be enforced in one single system. === 4-eyes Authorization === To avoid accidental misconfiguration and other human errors, PSM supports the 4-eyes authorization principle. This is achieved by requiring an authorizer to allow administrators to access the server. The authorizer also has the possibility to monitor – and terminate - the session of the administrator in real-time, as if they were watching the same screen. === Real-time Monitoring and Session Termination === PSM can monitor the network traffic in real time, and execute various actions if a certain pattern (for example, a suspicious command, window title or text) appears on the screen. PSM can also detect specific patterns such as credit card numbers. In case of detecting a suspicious user action, PSM can send an e-mail alert or immediately terminate the connection. For example, PSM can block the connection before a destructive administrator command, such as the „rm” comes into effect. === Session Recording === PSM makes user activities traceable by recording them in tamper-proof and confidential audit trails. It records the selected sessions into encrypted, timestamped, and digitally signed audit trails. Audit trails can be browsed online, or followed real-time to monitor the activities of the users. PSM replays the recorded sessions just like a movie – actions of the users can be seen exactly as they appeared on their monitor. The Balabit Desktop Player enables fast forwarding during replays, searching for events (for example, typed commands or pressing Enter) and texts seen by the user. In the case of any problems (database manipulation, unexpected shutdown, etc.) the circumstances of the event are readily available in the trails, thus the cause of the incident can be identified. In addition to recording audit trails, transferred files can be also recorded and extracted for further analysis.

  Read more →
• 

  Visible (mobile app)

  Visible is a health tracking mobile app for people with long COVID and myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS). The company was founded by a Harry Leeming, an engineer from London living with long Covid since 2020, and Luke Martin-Fuller. In November 2022, Visible released an open beta of an app that aims to help people pace their activities to avoid post-exertional malaise. The app gathers data on exertion levels, symptom severity, and heart-rate variability. HRV is approximated using a smartphone's camera via a technique called photoplethysmography, and according to the app's developers, can indicate how much someone needs rest. The app is currently free, but is expected to be freemium in the future. Users can also opt to allow their data be used for research purposes. In July 2023, Visible and Imperial College London announced the start of the first two studies. One is on the effects of the menstrual cycle on long COVID symptoms, and the other is on the condition's epidemiology and economic impact. Visible has announced plans to couple the app with activity trackers for continuous monitoring of heart-rate and actimetry data, which the developers claim will be more effective. As of 2022, no clinical trials on Visible's effectiveness have been conducted.

  Read more →
• 

  T-pose

  In computer animation, a T-pose is a default posing for a humanoid 3D model's skeleton before it is animated. It is called so because of its shape: the straight legs and arms of a humanoid model combine to form a capital letter T. When the arms are angled downwards, the pose is sometimes referred to as an A-pose instead. Likewise, if the arms are angled upward, it is called a Y-pose. Generic terms encompassing all these (especially for non-humanoid models) include bind pose, blind pose, and reference pose. == Usage == The T-pose is primarily used as the default armature pose for skeletal animation in 3D software, which is then manipulated to create animation. The purpose of the T-pose relates to the important elements of the body being axis-aligned, thereby making it easier to rig the model for animation, physics, and other controls. Depending on the exact geometry of the model, other poses such as the A-pose may be more suitable for vertex deformation around areas such as the shoulders. Outside of being default poses in animation software, T-poses are typically used as placeholders for animation not yet completed, particularly in 3D animated video games. In some motion capture software, a T-pose must be assumed by the actor in the motion capture suit before motion capturing can begin. There are other poses used, but the T-pose is the most common one. == As an Internet meme == Starting in 2016 and resurfacing in 2017, the T-pose has become a widespread Internet meme due to its bizarre and somewhat comedic appearance, especially in video game glitches where a character's animation is unexpectedly supplanted by a T-pose. In a prerelease video of the game NBA Elite 11, the demo was filled with glitches, notably one unintentionally showing a T-pose in place of the proper animation for the model of player Andrew Bynum. The glitch later gained fame as the "Jesus Bynum glitch". Publisher EA eventually cancelled the game as they found it unsatisfactory. A similar occurrence happened with Cyberpunk 2077. In the 2023 Formula One season, driver George Russell performed a T-pose in the opening credits of the series' TV broadcasts. This quickly became a meme within the motorsports community. Russell repeated the pose after claiming pole position at the 2024 Canadian Grand Prix and winning the 2024 Austrian Grand Prix.

  Read more →
• 

  Puck App

  Puck App is a mobile application that allows hockey players to quickly find and rent a hockey goalie. Founded in 2015 in Toronto, the application primarily operates throughout Canada. It is available on Apple's App Store and Google Play. == History == Puck App was founded in 2016 by Niki Sawni. Users can rate the goalies, message with available goalies, and coordinate skill levels. In 2017, Puck App expanded to Western Canada and has over 1,000 goalies registered. In 2018, Puck App charged approximately $40 CDN to rent a goalie with more than 2 hours notice. Previously, Puck App was a competitor to a similar application called GoalieUp. As of 2024, both companies have agreed to a merger deal.

  Read more →
• 

  Systems development life cycle

  The systems development life cycle (SDLC) describes the typical phases and progression between phases during the development of a computer-based system. These phases progress from inception to retirement. At base, there is just one life cycle, but the taxonomy used to describe it may vary; the cycle may be classified into different numbers of phases and various names may be used for those phases. The SDLC is analogous to the life cycle of a living organism from its birth to its death. In particular, the SDLC varies by system in much the same way that each living organism has a unique path through its life. The SDLC does not prescribe how engineers should go about their work to move the system through its life cycle. Prescriptive techniques are referred to using various terms such as methodology, model, framework, and formal process. Other terms are used for the same concept as SDLC, including software development life cycle (also SDLC), application development life cycle (ADLC), and system design life cycle (also SDLC). These other terms focus on a different scope of development and are associated with different prescriptive techniques, but are about the same essential life cycle. The term "life cycle" is often written without a space, as "lifecycle", with the former more popular in the past and in non-engineering contexts. The acronym SDLC was coined when the longer form was more popular and has remained associated with the expansion, even though the shorter form is popular in engineering. Also, SDLC is relatively unique as opposed to the TLA SDL, which is highly overloaded. == Phases == Depending on the source, the SDLC is described as having different phases and using different terms. Even so, there are common aspects. The following attempts to describe notable phases using notable terminology. The phases are somewhat ordered by the natural sequence of development, although they can be overlapping and iterative. === Conceptualization === During conceptualization (a.k.a. conceptual design, system investigation, feasibility), options and priorities are considered. A feasibility study can determine whether the development effort is worthwhile via activities such as understanding user needs, cost estimation, benefit analysis, and resource analysis. A study should address operational, financial, technical, human factors, and legal/political concerns. === Requirements analysis === Requirements analysis (a.k.a. preliminary design) involves understanding the problem and determining what is needed. Often this involves engaging users to define the requirements and recording them in a document known as a requirements specification. === Design === During the design phase (a.k.a. detail design), a solution is planned. The plan can include relatively high-level information such as describing the major components of the system. The plan can include relatively low-level information such as describing functions, screen layout, business rules, and process flow. The design phase is informed by the requirements of the system. The design must satisfy each requirement. The design may be recorded in textual documents as well as functional hierarchy diagrams, example screen images, business rules, process diagrams, pseudo-code, and data models. === Construction === During construction (a.k.a. implementation, production), the system is realized. Based on the design, hardware and software components are created and integrated. This phase includes testing sub-components, components and the integration of some components, but typically does not include testing at the complete system level. This phase may include the development of training materials, including user manuals and help files. === Acceptance === The acceptance phase (a.k.a. system testing) is about testing the complete system to ensure that it meets customer expectations (requirements). === Deployment === The deployment phase (a.k.a. implementation) involves the logistics of delivery to the customer. Some systems are deployed as a single instance (i.e. in the cloud), and deployment may be ad hoc and manual. Some systems are built in quantity and are associated with manufacturing process and commissioning. This phase may include training users to use the system. It may include transitioning future development to support staff. === Maintenance === During the maintenance phase (a.k.a. operation, utilization, support) development is largely inactive, although this phase does include customer support for resolving user issues and recording suggestions for improvement. Fixes and enhancements are handled by returning to the first phase, conceptualization. For minor changes, the cycle may be significantly abbreviated compared to initial development. === Decommission === Decommission (a.k.a. disposition, retirement, phase-out) is when the system is removed from use, i.e., when it reaches end-of-life. == Practices == === Management and control === SDLC phase objectives are described in this section with key deliverables, a description of recommended tasks, and a summary of related control objectives for effective management. It is critical for the project manager to establish and monitor control objectives while executing projects. Control objectives are clear statements of the desired result or purpose and should be defined and monitored throughout a project. Control objectives can be grouped into major categories (domains), and relate to the SDLC phases as shown in the figure. To manage and control a substantial SDLC initiative, a work breakdown structure (WBS) captures and schedules the work. The WBS and all programmatic material should be kept in the "project description" section of the project notebook. The project manager chooses a WBS format that best describes the project. The diagram shows that coverage spans numerous phases of the SDLC, but the associated MCD (Management Control Domains) shows mappings to SDLC phases. For example, Analysis and Design is primarily performed as part of the Acquisition and Implementation Domain, and System Build and Prototype is primarily performed as part of delivery and support. === Work breakdown structured organization === The upper section of the WBS provides an overview of the project scope and timeline. It should also summarize the major phases and milestones. The middle section is based on the SDLC phases. WBS elements consist of milestones and tasks to be completed rather than activities to be undertaken, and have a deadline. Each task has a measurable output (e.g., an analysis document). A WBS task may rely on one or more activities (e.g., coding). Parts of the project needing support from contractors should have a statement of work (SOW). The development of an SOW does not occur during a specific phase of SDLC but is developed to include the work from the SDLC process that may be conducted by contractors. === Baselines === Baselines are established after four of the five phases of the SDLC, and are critical to the iterative nature of the model. Baselines become milestones. functional baseline: established after the conceptual design phase. allocated baseline: established after the preliminary design phase. product baseline: established after the detailed design and development phase. updated product baseline: established after the production construction phase. In the following diagram, these stages are divided into ten steps, from definition to creation and modification of IT work products:

  Read more →
• 

  Roadie (app)

  Roadie Inc. is an American package delivery company for business and private same-day, urgent and scheduled delivery in the United States. The company was founded in 2014 and launched its web and mobile apps in January 2015. As of September 2021, it reported having over 200,000 drivers covering more than 20,000 zip codes. Roadie states it matches gig drivers with deliveries that are directed along the routes they plan to travel. Major customers include The Home Depot, Walmart, Tractor Supply Company, Best Buy and Delta Air Lines. In September 2021, UPS entered into an agreement to acquire Roadie for an undisclosed amount with the transaction expected to be closed in the fourth quarter. == History == Roadie was founded by Marc Gorlin, a co-founder of Kabbage and founder of VerticalOne and Pretty Good Privacy, as a same-day and urgent delivery company in 2014. In January 2015, Roadie launched the first consumer to consumer (C2C) version of its app with a Series A funding round of $10 million. In February, Roadie announced a partnership with Waffle House to designate its restaurants "Roadie Roadhouses", offering a neutral meeting place for drivers and senders. Drivers receive free food and drink through the partnership. In May, late-night host Jimmy Kimmel discussed the Roadie-Waffle House relationship in an opening monologue on Jimmy Kimmel Live!. Roadie's driver network expanded significantly as a result. Roadie closed a Series B round of funding in June, raising $15 million, and its first business to business (B2B) app version launched that November. In 2015, Delta Air Lines signed an agreement with Roadie to deliver mishandled luggage, becoming Roadie’s first enterprise customer. Roadie launched a pilot program with Delta at Daytona Beach International Airport. Since then, the relationship has expanded to include over 70 airports around the United States and a first mile/last mile line haul relationship with Delta Cargo. In 2017, the company signed a deal with The Home Depot, also based in Atlanta, and in February 2019, closed a Series C round of funding. In October 2019, Roadie and Delta Cargo announced a partnership to create a same-day cross-country delivery offering, DASH Door-to-Door, the first of its kind from a U.S. passenger airline. Tractor Supply Company became the first general merchandise retailer to offer same-day delivery from every store in April 2020 through Roadie. In September 2021, UPS entered an agreement to acquire Roadie for an undisclosed amount. The transaction was expected to close in the fourth quarter of 2021. Roadies, which at the time reported having 200,000 operators serving over 20,000 ZIP Codes, was expected to continue operations under its name as a separate company with no transfer of packages between the UPS and Roadies networks. The relationship between the companies goes back several years with UPS being an early investor. Earlier in 2021, UPS had begun a pilot program testing same-day deliveries via Roadies. == Operations == === On-the-way model === Roadie’s app works by connecting drivers with senders, businesses or consumers who have items that need to be delivered. Deliveries within the app are referred to as "Gigs", which Gorlin said was inspired by live music road crews, also known as roadies. A sender creates a Gig on Roadie's web app or via its API. Drivers then review deliveries in their area on their mobile app and may choose to offer to take on individual or groups of deliveries along the same route. Gigs are then assigned to drivers by Roadie's algorithm. According to the company, this model encourages drivers to choose Gigs that align with their planned schedules and routes. Roadie calls this its "on-the-way" delivery model. The go-to-market approach taken by Roadie also differs from its competitors. Rather than launching in major cities and sequentially adding new markets city-by-city, Roadie launched nationwide from its inception. The company relies on retail and airline partners to drive volume of deliveries in individual markets, which in turn builds up a network of drivers in those areas, making it easier for small businesses and consumers to send deliveries as well. This strategy allows Roadie to reach smaller cities and towns in rural or exurban communities, traditionally difficult markets for delivery providers to serve. === Service lines === Roadie’s platform is most popular for same-day, on-demand or scheduled first mile/last mile delivery, especially delivery from stores and warehouses. Some retailers also use it for returns and reverse logistics, moving inventory, and hot shot shipping. Roadie operates 1-hour grocery delivery for Walmart, and delivers perishable food items for others including small, independent retailers. The on-the-way model complements the grocery industry’s just in time model, making last-mile deliveries that do not break the cold chain. === Cross-country same-day delivery === In October 2019, Roadie and Delta Cargo launched DASH Door-to-Door, a 24/7 door-to-door pick-up and delivery service. Roadie handles the first and last mile and Delta manages the line haul via passenger flights. The service launched originally from Atlanta to 55 cities and is an industry-first for a US commercial airline. === Promotion, awards and corporate citizenship === In September 2015, Roadie announced a partnership with Atlanta-based musician Ludacris, to promote the app. Following the devastation caused by flooding in Baton Rouge in 2016, Roadie offered free pickup and delivery for all deliveries traveling to and from the Baton Rouge area. In December 2020, Walmart named Roadie its top delivery partner for "Highest Driver Customer Satisfaction" and "Highest Net Promoter Score", after expanding into general merchandise deliveries as well as grocery that same year.

  Read more →
• 

  Touch 'n Go eWallet

  Touch 'n Go eWallet is a Malaysian digital wallet and online payment platform, established in Kuala Lumpur, Malaysia, in July 2017 as a joint venture between Touch 'n Go and Ant Financial. It allows users to make payments at over 280,000 merchant touch points via QR code, as well as perform peer-to-peer (P2P) money transfers. Since then, the e-wallet further diversified for users to pay for tolls via RFID or PayDirect, street parking and various online payment spanning e-hailing, car-sharing apps or taxis, various overhead bills; top-up for mobile prepaid or in-game currencies; purchases on e-commerce websites; food delivery; renewing motor insurance and other insurance/takaful plans; and even movie, bus, trains or airline tickets. == Background == Prior to the launch of the e-wallet service, Touch 'n Go provided stored-value physical all-in-one contactless card (namely Touch 'n Go cards or "TnG cards") that users can use to pay for toll fares, public transportation and parking lots as well as purchases in some retail stores. In 1999, Touch 'n Go also markets SmartTag devices that allow road users to pass through certain toll booths without the need to unwind the car window. The high entry cost of the device (around RM 100 each) also meant that only few can enjoy the seamless experience. In 2009, Touch 'n Go partnered with Maxis to launch FastTap, a new mobile payment service that utilised Near-Field Communication (NFC). Maxis customers can make payments by placing the phone near the card readers (that also supports physical bank cards and Touch ’N Go cards). However, the venture featured only one phone model, Nokia 6212, which greatly limited the public reach. In July 2012, Touch 'n Go announced another collaboration with CIMB and Maxis to create similar NFC-based online transaction service that runs on compatible smartphones. Touch 'n Go Wallet was launched in February 2017 as an QR code-based e-wallet application, to compete with Samsung Pay that utilizes NFC modules. In the controlled pilot test in Taman Tun Dr Ismail, the correspondents can experience basic functionalities (prepaid mobile service reload, bills payment, movie tickets and flight tickets purchase, transfer of money with another user, and payments at participating stores and restaurants). While the deployed version of the app was generally well-received, the existing process to transfer the balance to the physical TnG card stored value from the app garnered unanimous backlash. Test groups felt that the need to head to a self-service terminal named "Pick Up Device" in person within 24 hours for completion, along with the failure to do so (the balance would be credited back to the wallet after 24 hours), was not divulged clearly and also defeated the purpose of convenience, not to mention there were only 2 such terminals. The feature was eventually suspended. On 15 November 2017, Touch 'n Go was granted permission by the Central Bank of Malaysia to form a joint venture with Ant Financial, a Chinese-based financial company that operates Alipay. The partnership allowed the local e-wallet to learn from and build upon the operational model pioneered by Alipay. In June 2018, it was reported that Touch 'n Go was pilot testing the uses of the Touch 'n Go eWallet in Rapid Transit, as the ticketing system was enabled on the Kelana Jaya line in the Klang Valley. Pilot testing only applied to stations in Kelana Jaya, KL Gateway–Universiti, Kerinchi, KL Sentral, Dang Wangi, KLCC, and Ampang Park. The test was reported to be successful in February 2020 and was planned to be fully deployed on the LRT and MRT. Due to unforeseen circumstances, this feature did not come into fruition, the app merely adds in-app purchase of monthly concession cards called "My50". In August 2018, Touch 'n Go announced that selected drivers may experience first-hand a new RFID-based payment (later rebranded as "myRFID") that serves to replace SmartTag devices on closed toll roads with during pilot testing phase commencing on 3 September 2018. On 2 November 2018, participation in the ongoing pilot programme was expanded, allowing more drivers to sign up ahead of the public rollout of the RFID system. During the same period, Touch 'n Go has discontinued the sales of SmartTAG devices in favor of the RFID-based payment system. Initially, the installation of the RFID chip onto the car could only be done by Touch 'n Go staff at the RFID fitment centers, at no cost. As the pilot testing concluded on 15 February 2020, a self-installation kit are being offered to the public on Lazada and Shopee. Support for taxi-hailing mobile apps was added in November 2018 when Touch 'n Go partnered with EzCab and Public Cab, allowing users to make payments via QR code. This was later expanded to support MULA on 7 January 2020, and later MyCar on 4 April 2020. Touch 'n Go eWallet was also the first eWallet to convert Kuala Lumpur's most famous Ramadan bazaar in Kampong Bahru into "Kampong Kashless", a venue that can accept cashless QR payments. It welcomed more than 250,000 Malaysians including local celebrities and government officials. On 1 October 2019, some e-commerce websites owned by the Alibaba Group (TMall and Taobao) began to support Touch 'n Go eWallet payments, Lazada joined the list on 29 October 2019. Touch 'n Go eWallet was one of the three e-wallet services in Malaysia (the other being Boost and GrabPay) that was eligible for its users to receive an RM 30 credit in conjunction of E-Tunai Rakyat program under the Budget 2020 plan, that further normalizes adoption of cashless and mobile payment among Malaysians. Unlike Boost and GrabPay, whose P2P transfers were completely disabled until users have exhausted the RM 30 first, Touch 'n Go eWallet did not impose such measures. in 2020, Touch 'n Go eWallet joined DuitNow, an electronic transaction ecosystem in Malaysia which allows the funds from Touch 'n Go eWallet to be transferred to other competing services and vice versa, by implementing a standard DuitNow QR code deisgn. Japan become the first country outside Malaysia to support Touch 'n Go eWallet payment via Alipay Connect. During the COVID-19 pandemic and the enforcement of the movement control order, use of eWallets (including Touch 'n Go eWallet) increased tremendously among citizens due to its contactless nature of the payment and increased take-out orders at home; which in turn helped small and medium-sized enterprises to thrive. Touch 'n Go eWallet launched its loyalty programme – The Goal Hunter – in October 2020 where on monthly basis, users collect stamps by paying with the app in exchange for rewards that include lucky draws and other vouchers. == Services == Touch 'n Go eWallet app is available for download on both Google Play and Apple Appstore. It utilizes QR code technology for local in-store payments. The Touch 'n Go eWallet app also diversifies payment types, including but not limited to Utility bills Purchase of motor insurance policy Pay Later facility Prepaid reload and Postpaid payment to telecommunications companies loan repayments for courts, MBSJ payments, zakat and PTPTN payment for car parking P2P transfer airline ticket bookings; movie tickets from TGV Cinemas RFID refuelling at Shell stations (defunct after Shell launched its own payment app in 2024) User can reload the eWallet credit by setting up auto-reload, purchasing reload pins from convenience stores (such as 7-Eleven, KK Super Mart, MyNews, Family Mart etc.), reloading by FPX and credit/debit card. The PayDirect feature allows users to link their physical Touch 'n Go cards into the eWallet, where the toll fare can be debited from the eWallet balance when flashing the card near the sensor. In the circumstance of insufficient balance in the app, the toll fare will be deducted from the physical card's balance instead. This also conveniently allows users to view the card's remaining balance. Touch 'n Go eWallet is the first and only eWallet to offer a money-back guarantee when an unauthorised transaction is made on the user’s eWallet account, subject to Terms & Conditions. Payment via QR code scanning, including Touch 'n Go eWallet, becomes a norm in most of the shops/restaurants across Malaysia, including roadside hawkers/stall owners and automatic vending machines. The merchants usually display their owner's individual QR or Business account that they can apply for in-app. The popularity attributes to the low merchant onboarding cost (Unlike NFC payment and debit/credit card that requires purchase or rental of a payment terminal device at a yearly fee.) The app is also one of the few ewallet that supports bidirectional liquidity (alongside MAE developed by Maybank), where funds can be transferred two-way with bank accounts. This is not possible with the other major ewallets (GrabPay, Boost, ShopeePay etc.) where the money that is reloaded to the wallet cannot be transferred to another bank account, unless through manual req

  Read more →