AI Chatbot Ux

AI Chatbot Ux — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  80 Million Tiny Images

  80 Million Tiny Images is a dataset intended for training machine-learning systems constructed by Antonio Torralba, Rob Fergus, and William T. Freeman in a collaboration between MIT and New York University. It was published in 2008. The dataset has size 760 GB. It contains 79,302,017 32×32-pixel color images, scaled down from images scraped from the World Wide Web over 8 months. The images are classified into 75,062 classes. Each class is a non-abstract noun in WordNet. Images may appear in more than one class. The dataset was motivated by non-parametric models of neural activations in the visual cortex upon seeing images. The CIFAR-10 dataset uses a subset of the images in this dataset, but with independently generated labels, as the original labels were not reliable. The CIFAR-10 set has 6000 examples of each of 10 classes, and the CIFAR-100 set has 600 examples of each of 100 non-overlapping classes. == Construction == It was first reported in a technical report in April 2007, during the middle of the construction process, when there were only 73 million images. The full dataset was published in 2008. They began with all 75,846 non-abstract nouns in WordNet, and then for each of these nouns, they scraped 7 image search engines: Altavista, Ask.com, Flickr, Cydral, Google, Picsearch, and Webshots. After 8 months of scraping, they obtained 97,245,098 images. Since they did not have enough storage, they downsized the images to 32×32 as they were scraped. After gathering, they removed images with zero variance and intra-word duplicate images, resulting in the final dataset. Out of the 75,846 nouns, only 75,062 classes had any results, so the other nouns did not appear in the final dataset. The number of images per noun follows a Zipf-like distribution, with 1056 images per noun on average. To prevent a few nouns taking up too many images, they put an upper bound of at most 3000 images per noun. == Retirement == The 80 Million Tiny Images dataset was retired from use by its creators in 2020, after a paper by researchers Abeba Birhane and Vinay Prabhu found that some of the labeling of several publicly available image datasets, including 80 Million Tiny Images, contained racist and misogynistic slurs which were causing models trained on them to exhibit racial and sexual bias. The dataset also contained offensive images. Following the release of the paper, the dataset's creators removed the dataset from distribution, and requested that other researchers not use it for further research and to delete their copies of the dataset.

  Read more →
• 

  Packed pixel

  In packed pixel or chunky framebuffer organization, the bits defining each pixel are clustered and stored consecutively. For example, if there are 16 bits per pixel, each pixel is represented in two consecutive (contiguous) 8-bit bytes in the framebuffer. If there are 4 bits per pixel, each framebuffer byte defines two pixels, one in each nibble. The latter example is as opposed to storing a single 4-bit pixel in a byte, leaving 4 bits of the byte unused. If a pixel has more than one channel, the channels are interleaved when using packed pixel organization. Packed pixel displays were common on early microcomputer system that shared a single main memory for both the central processing unit (CPU) and display driver. In such systems, memory was normally accessed a byte at a time, so by packing the pixels, the display system could read out several pixels worth of data in a single read operation. Packed pixel is one of two major ways to organize graphics data in memory, the other being planar organization, where each pixel is made of individual bits stored in their own plane. For a 4-bit color value, memory would be organized as four screen-sized planes of one bit each and a single pixel's value built up by selecting the appropriate bit from each plane. Planar organization has the advantage that the data can be accessed in parallel, and is used when memory bandwidth is an issue.

  Read more →
• 

  Joox

  Joox (stylised in all caps) is a music streaming service owned by Tencent, launched in January 2015. Joox is the biggest music streaming app in Asian markets such as Hong Kong, Macau, Indonesia, Malaysia, Myanmar, Thailand and also in South Africa before it was shut down in early 2022. Joox is a freemium service, providing most of its songs free, while some songs are only available for premium users, offered via paid subscriptions or by doing different tasks offered. In 2017, Joox launched their service in their first non-Asian market, South Africa, which for an unknown reason shut down five years later. The service now accounts for more than 50% of all music streaming app downloads in their Asian markets. The number of music-streaming users in Hong Kong, Macau, Malaysia, Thailand, Myanmar and Indonesia was expected to reach 87 million by 2020. == Background == Before the emergence of Joox, Tencent owned QQ Music, one of the largest music streaming and download service in China. In 2015, they introduced Joox as their expansion of music services to overseas market instead of mainland China, starting first in Hong Kong. Instead of providing free services by playing audio ads to users like Spotify, another major music service, Joox focused on banner ads, splash ads and other advertising methods such as category playlists and in-app skins. They claimed it as a success. Joox offered their premium VIP access to DStv subscribers free of charge. DStv is the sister company to Tencent and is the primary pay-TV provider in South Africa. In November 2021, it was announced that Joox will stop streaming in South Africa in March 2022.

  Read more →
• 

  Morphing

  Morphing is a special effect in motion pictures and animations that changes (or morphs) one image or shape into another through a seamless transition. Traditionally such a depiction would be achieved through dissolving techniques on film. Since the early 1990s, this has been replaced by computer software to create more realistic transitions. A similar method is applied to audio recordings, for example, by changing voices or vocal lines. == Early transformation techniques == Long before digital morphing, several techniques were used for similar image transformations. Some of those techniques are closer to a matched dissolve – a gradual change between two pictures without warping the shapes in the images – while others did change the shapes in between the start and end phases of the transformation. === Tabula scalata === Known since at least the end of the 16th century, Tabula scalata is a type of painting with two images divided over a corrugated surface. Each image is only correctly visible from a certain angle. If the pictures are matched properly, a primitive type of morphing effect occurs when changing from one viewing angle to the other. === Mechanical transformations === Around 1790 French shadow play showman François Dominique Séraphin used a metal shadow figure with jointed parts to have the face of a young woman changing into that of a witch. Some 19th century mechanical magic lantern slides produced changes to the appearance of figures. For instance a nose could grow to enormous size, simply by slowly sliding away a piece of glass with black paint that masked part of another glass plate with the picture. === Matched dissolves === In the first half of the 19th century "dissolving views" were a popular type of magic lantern show, mostly showing landscapes gradually dissolving from a day to night version or from summer to winter. Other uses are known, for instance Henry Langdon Childe showed groves transforming into cathedrals. The 1910 short film Narren-grappen shows a dissolve transformation of the clothing of a female character. Maurice Tourneur's 1915 film Alias Jimmy Valentine featured a subtle dissolve transformation of the main character from respected citizen Lee Randall into his criminal alter ego Jimmy Valentine. The Peter Tchaikovsky Story in a 1959 TV-series episode of Disneyland features a swan automaton transforming into a real ballet dancer. In 1985, Godley & Creme created a "morph" effect using analogue cross-fades on parts of different faces in the video for "Cry". === Animation === In animation, the morphing effect was created long before the introduction of cinema. A phenakistiscope designed by its inventor Joseph Plateau was printed around 1835 and shows the head of a woman changing into a witch and then into a monster. Émile Cohl's 1908 animated film Fantasmagorie featured much morphing of characters and objects drawn in simple outlines. == Digital morphing == In the early 1990s, computer techniques capable of more convincing results saw increasing use. These involved distorting one image at the same time that it faded into another through marking corresponding points and vectors on the "before" and "after" images used in the morph. For example, one would morph one face into another by marking key points on the first face, such as the contour of the nose or location of an eye, and mark where these same points existed on the second face. The computer would then distort the first face to have the shape of the second face at the same time that it faded the two faces. To compute the transformation of image coordinates required for the distortion, the algorithm of Beier and Neely can be used. === Concerns === In 1993 concerns were raised about the authenticity of digitally altered images arising from morphing. Images of fake "tween" people found half way between two morphed people created a skeptical media long before AI. === Early examples === In or before 1986, computer graphics company Omnibus created a digital animation for a Tide commercial with a Tide detergent bottle smoothly morphing into the shape of the United States. The effect was programmed by Bob Hoffman. Omnibus re-used the technique in the movie Flight of the Navigator (1986). It featured scenes with a computer generated spaceship that appeared to change shape. The plaster cast of a model of the spaceship was scanned and digitally modified with techniques that included a reflection mapping technique that was also developed by programmer Bob Hoffman. The 1986 movie The Golden Child implemented early digital morphing effects from animal to human and back. Willow (1988) featured a more detailed digital morphing sequence with a person changing into different animals. A similar process was used a year later in Indiana Jones and the Last Crusade to create Walter Donovan's gruesome demise. Both effects were created by Industrial Light & Magic, using software developed by Tom Brigham and Doug Smythe (AMPAS). In 1991, morphing appeared notably in the Michael Jackson music video "Black or White" and in the movies Terminator 2: Judgment Day and Star Trek VI: The Undiscovered Country. The first application for personal computers to offer morphing was Gryphon Software Morph on the Macintosh. Other early morphing systems included ImageMaster, MorphPlus and CineMorph, all of which premiered for the Amiga in 1992. Other programs became widely available within a year, and for a time the effect became common to the point of cliché. For high-end use, Elastic Reality (based on MorphPlus) saw its first feature film use in In The Line of Fire (1993) and was used in Quantum Leap (work performed by the Post Group). At VisionArt Ted Fay used Elastic Reality to morph Odo for Star Trek: Deep Space Nine. The Snoop Dogg music video "Who Am I? (What's My Name?)", where Snoop Dogg and the others morph into dogs. Elastic Reality was later purchased by Avid, having already become the de facto system of choice, used in many hundreds of films. The technology behind Elastic Reality earned two Academy Awards in 1996 for Scientific and Technical Achievement going to Garth Dickie and Perry Kivolowitz. The effect is technically called a "spatially warped cross-dissolve". The first social network designed for user-generated morph examples to be posted online was Galleries by Morpheus. In late 1991 Yeti Productions employed a young Stephen Regelous to run it's 486 computer graphics system in Wellington New Zealand. After producer Barry Thomas showed him Michael Jackson's "Black or White", Regelous wrote 10,000 lines of C++ code of triangle-based digital morphing software. Together they created morphing based TV commercials for The NZ Cancer Society, Fit food, Salvation Army and others. The Fit food commercial employed morphing with 35mm, pin registered, digitally controlled motion control designed and made by Russell Collins with software by Stephen Regelous. In Taiwan, Aderans, a hair loss solutions provider, did a TV commercial featuring a morphing sequence in which people with lush, thick hair morph into one another, reminiscent of the end sequence of the "Black or White" video. === Present use === Morphing algorithms continue to advance and programs can automatically morph images that correspond closely enough with relatively little instruction from the user. This has led to the use of morphing techniques to create convincing slow-motion effects where none existed in the original film or video footage by morphing between each individual frame using optical flow technology. Morphing has also appeared as a transition technique between one scene and another in television shows, even if the contents of the two images are entirely unrelated. The algorithm in this case attempts to find corresponding points between the images and distort one into the other as they crossfade. While perhaps less obvious than in the past, morphing is used heavily today. Whereas the effect was initially a novelty, today, morphing effects are most often designed to be seamless and invisible to the eye. A particular use for morphing effects is modern digital font design. Using morphing technology, called interpolation or multiple master tech, a designer can create an intermediate between two styles, for example generating a semibold font by compromising between a bold and regular style, or extend a trend to create an ultra-light or ultra-bold. The technique is commonly used by font design studios. == Software == After Effects Animate Elastic Reality FantaMorph Gryphon Software Morph Morph Age Morpheus Nuke SilhouetteFX

  Read more →
• 

  Quantification (machine learning)

  In machine learning, quantification (variously called learning to quantify, or supervised prevalence estimation, or class prior estimation) is the task of using supervised learning in order to train models (quantifiers) that estimate the relative frequencies (also known as prevalence values) of the classes of interest in a sample of unlabelled data items. For instance, in a sample of 100,000 unlabelled tweets known to express opinions about a certain political candidate, a quantifier may be used to estimate the percentage of these tweets which belong to class `Positive' (i.e., which manifest a positive stance towards this candidate), and to do the same for classes `Neutral' and `Negative'. Quantification may also be viewed as the task of training predictors that estimate a (discrete) probability distribution, i.e., that generate a predicted distribution that approximates the unknown true distribution of the items across the classes of interest. Quantification is different from classification, since the goal of classification is to predict the class labels of individual data items, while the goal of quantification it to predict the class prevalence values of sets of data items. Quantification is also different from regression, since in regression the training data items have real-valued labels, while in quantification the training data items have class labels. It has been shown in multiple research works that performing quantification by classifying all unlabelled instances and then counting the instances that have been attributed to each class (the 'classify and count' method) usually leads to suboptimal quantification accuracy. This suboptimality may be seen as a direct consequence of 'Vapnik's principle', which states: If you possess a restricted amount of information for solving some problem, try to solve the problem directly and never solve a more general problem as an intermediate step. It is possible that the available information is sufficient for a direct solution but is insufficient for solving a more general intermediate problem. In our case, the problem to be solved directly is quantification, while the more general intermediate problem is classification. As a result of the suboptimality of the 'classify and count' method, quantification has evolved as a task in its own right, different (in goals, methods, techniques, and evaluation measures) from classification. == Quantification tasks == === Quantification tasks according to the set of classes === The main variants of quantification, according to the characteristics of the set of classes used, are: Binary quantification, corresponding to the case in which there are only n = 2 {\displaystyle n=2} classes and each data item belongs to exactly one of them; Single-label multiclass quantification, corresponding to the case in which there are n > 2 {\displaystyle n>2} classes and each data item belongs to exactly one of them; Multi-label multiclass quantification, corresponding to the case in which there are n ≥ 2 {\displaystyle n\geq 2} classes and each data item can belong to zero, one, or several classes at the same time; Ordinal quantification, corresponding to the single-label multiclass case in which a total order is defined on the set of classes. Regression quantification, a task which stands to 'standard' quantification as regression stands to classification. Strictly speaking, this task is not a quantification task as defined above (since the individual items do not have class labels but are labelled by real values), but has enough commonalities with other quantification tasks to be considered one of them. Most known quantification methods address the binary case or the single-label multiclass case, and only few of them address the multi-label, ordinal, and regression cases. Binary-only methods include the Mixture Model (MM) method, the HDy method, SVM(KLD), and SVM(Q). Methods that can deal with both the binary case and the single-label multiclass case include probabilistic classify and count (PCC), adjusted classify and count (ACC), probabilistic adjusted classify and count (PACC), the Saerens-Latinne-Decaestecker EM-based method (SLD), and KDEy. Methods for multi-label quantification include regression-based quantification (RQ) and label powerset-based quantification (LPQ). Methods for the ordinal case include ordinal versions of the above-mentioned ACC, PACC, and SLD methods, and ordinal versions of the above-mentioned HDy method. Methods for the regression case include Regress and splice and Adjusted regress and sum. === Quantification tasks according to the type of data === Several subtasks of quantification may be identified according to the type of data involved. Example such tasks are: Quantification of networked data. This task consists of performing quantification when the datapoints are members of a relation, i.e., are interlinked. As such, this task is a strict relative of collective classification. Quantification over time. This task consists of performing quantification on sets that become available in a temporal sequence, i.e., as a data stream, and finds application in contexts in which class prevalence values must be monitored over time. == Evaluation measures for quantification == Several evaluation measures can be used for evaluating the error of a quantification method. Since quantification consists of generating a predicted probability distribution that estimates a true probability distribution, these evaluation measures are ones that compare two probability distributions. Most evaluation measures for quantification belong to the class of divergences. Evaluation measures for binary quantification, single-label multiclass quantification, and multi-label quantification, are Absolute Error Squared Error Relative Absolute Error Kullback–Leibler divergence Pearson Divergence Evaluation measures for ordinal quantification are Normalized Match Distance (a particular case of the Earth Mover's Distance) Root Normalized Order-Aware Distance == Applications == Quantification is of special interest in fields such as the social sciences, epidemiology, market research, allocating resources, and ecological modelling, since these fields are inherently concerned with aggregate data. However, quantification is also useful as a building block for solving other downstream tasks, such as improving the accuracy of classifiers on out-of-distribution data, measuring classifier bias and ranker bias, and estimating the accuracy of classifiers on out-of-distribution data. == Resources == LQ 2021: the 1st International Workshop on Learning to Quantify LQ 2022: the 2nd International Workshop on Learning to Quantify LQ 2023: the 3rd International Workshop on Learning to Quantify LQ 2024: the 4th International Workshop on Learning to Quantify LQ 2025: the 5th International Workshop on Learning to Quantify LeQua 2022: the 1st Data Challenge on Learning to Quantify LeQua 2024: the 2nd Data Challenge on Learning to Quantify QuaPy: An open-source Python-based software library for quantification QuantificationLib: A Python library for quantification and prevalence estimation

  Read more →
• 

  Fake nude photography

  Fake nude photography is the creation of nude photographs designed to appear as genuine nudes of an individual. The motivations for the creation of these modified photographs include curiosity, sexual gratification, the stigmatization or embarrassment of the subject, and commercial gain, such as through the sale of the photographs via pornographic websites. Fakes can be created using image editing software or through machine learning. Fake images created using the latter method are called deepfakes. == History == Magazines such as Celebrity Skin published non-fake paparazzi shots and illicitly obtained nude photos, showing there was a market for such images. Subsequently, some websites hosted fake nude or pornographic photos of celebrities, which are sometimes referred to as celebrity fakes. In the 1990s and 2000s, fake nude images of celebrities proliferated on Usenet and on websites, leading to campaigns to take legal action against the creators of the images and websites dedicated to determining the veracity of nude photos. "Deepfakes", which use artificial neural networks to superimpose one person's face into an image or video of someone else, were popularized in the late 2010s, leading to concerns about the technology's use in fake news and revenge porn. Fake nude photography is sometimes confused with Deepfake pornography, but the two are distinct. Fake nude photography typically starts with human-made non-sexual images, and merely makes it appear that the people in them are nude (but not having sex). Deepfake pornography typically starts with human-made sexual (pornographic) images or videos, and alters the actors' facial features to make the participants in the sexual act look like someone else. === DeepNude === In June 2019, a downloadable Windows and Linux application called DeepNude was released which used a Generative Adversarial Network to remove clothing from images of women. The images it produced were typically not pornographic, merely nude. Because there were more images of nude women than men available to its creator, the images it produced were all female, even when the original was male. The app had both a paid and unpaid version. A few days later, on June 27, the creators removed the application and refunded consumers, although various copies of the app, both free and for charge, continue to exist. On GitHub, the open-source version of this program called "open-deepnude" was deleted. The open-source version had the advantage of allowing it to be trained on a larger dataset of nude images to increase the resulting nude image's accuracy level. A successor free software application, Dreamtime, was later released, and some copies of it remain available, though some have been suppressed. === Deepfake Telegram Bot === In July 2019 a deepfake bot service was launched on messaging app Telegram that used AI technology to create nude images of women. The service was free and enabled users to submit photos and receive manipulated nude images within minutes. The service was connected to seven Telegram channels, including the main channel that hosts the bot, technical support, and image sharing channels. While the total number of users was unknown, the main channel had over 45,000 members. As of July 2020, it is estimated that approximately 24,000 manipulated images had been shared across the image sharing channels. === Nudify websites === By late 2024, most ways to produce nude images from photographs of clothed people were accessible at websites rather than in apps, and required payment. == Purposes == The reasons for the creation of nude photos may range from a need to discredit the target publicly, personal hatred for the target, or the promise of pecuniary gains for such work on the part of the creator of such photos. Fake nude photos often target prominent figures such as businesspeople or politicians. == Notable cases == In 2010, 97 people were arrested in Korea after spreading fake nude pictures of the group Girls' Generation on the internet. In 2011, a 53-year-old Incheon man was arrested after spreading more fake pictures of the same group. In 2012, South Korean police identified 157 Korean artists of whom fake nudes were circulating. In 2012, when Liu Yifei's fake nude photography released on the network, Liu Yifei Red Star Land Company declared a legal search to find out who created and released the photos. In the same year, Chinese actor Huang Xiaoming released nude photos that sparked public controversy, but they were ultimately proven to be real pictures. In 2014, supermodel Kate Upton threatened to sue a website for posting her fake nude photos. Previously, in 2011, this page was threatened by Taylor Swift. In November 2014, singer Rain was angry because of a fake nude photo that spread throughout the internet. Information reveals that: "Rain's nude photo was released from Kim Tae-hee's lost phone." Rain's label, Cube Entertainment, stated that the person in the nude photo is not Rain and the company has since stated that it will take strict legal action against those who post photos together with false comments. In July 2018, Seoul police launched an investigation after a fake nude photo of President Moon Jae-in was posted on the website of the Korean radical feminist group WOMAD. In early 2019, Alexandria Ocasio-Cortez, a Democratic politician, was berated by other political parties over a fake nude photo of her in the bathroom. The picture created a huge wave of media controversy in the United States. == Methods == Fake nude images can be created using image editing software or neural network applications. There are two basic methods: Combine and superimpose existing images onto source images, adding the face of the subject onto a nude model. Remove clothes from the source image to make it look like a nude photo. == Impact == Images of this type may have a negative psychological impact on the victims and may be used for extortion purposes.

  Read more →
• 

  Halloween Problem

  In computing, the Halloween Problem refers to a phenomenon in databases in which an update operation causes a change in the physical location of a row, potentially allowing the row to be visited again later in the same update operation. This could even cause an infinite loop in some cases where updates continually place the updated record ahead of the scan performing the update operation. The potential for this database error was first discovered by Don Chamberlin, Pat Selinger, and Morton Astrahan in the mid-1970s, on Halloween day, while working on query optimization. They wrote a SQL query supposed to give a ten percent raise to every employee who earned less than $25,000. This query would run successfully, with no errors, but when finished all the employees in the database earned at least $25,000, because it kept giving them a raise until they reached that level. The expectation was that the query would iterate over each of the employee records with a salary less than $25,000 precisely once. In fact, because even updated records were visible to the query execution engine and so continued to match the query's criteria, salary records were matching multiple times and each time being given a 10% raise until they were all greater than $25,000. Contrary to what some believe, the name is not descriptive of the nature of the problem but rather was given due to the day it was discovered on. As recounted by Don Chamberlin: Pat and Morton discovered this problem on Halloween... I remember they came into my office and said, "Chamberlin, look at this. We have to make sure that when the optimizer is making a plan for processing an update, it doesn't use an index that is based on the field that is being updated. How are we going to do that?" It happened to be on a Friday, and we said, "Listen, we are not going to be able to solve this problem this afternoon. Let's just give it a name. We'll call it the Halloween Problem and we'll work on it next week." And it turns out it has been called that ever since.

  Read more →
• 

  Voyages: The Trans-Atlantic Slave Trade Database

  Voyages: The Trans-Atlantic Slave Trade Database is a database hosted at Rice University that aims to present all documentary material pertaining to the transatlantic slave trade. It is a sister project to African Origins. The database breaks down the kingdoms and countries that engaged in the Atlantic trade. By 2008, the project had gathered data on nearly 35,000 transatlantic slave voyages from 1501 to 1867. For each voyage they sought to establish dates, owners, vessels, captains, African visits, American destinations, numbers of slaves embarked, and numbers landed. They have been able to find much of this material for an estimated 80 percent of the entire transatlantic African slave trade. With corrections for missing voyages, the Project has estimated the entire size of the transatlantic slave trade with more comprehension, precision, and accuracy than before. They reckon that in 366 years, slaving vessels embarked about 12.5 million captives in Africa, and landed 10.7 million in the New World. A horrific discovery is a careful estimate that the Middle Passage took a toll of more than 1.8 million African lives. In this quantitative database, the numbers are enslaved people.

  Read more →
• 

  Machine vision

  Machine vision is the technology and methods used to provide imaging-based automatic inspection and analysis for such applications as automatic inspection, process control, and robot guidance, usually in industry. Machine vision refers to many technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of computer science. It attempts to integrate existing technologies in new ways and apply them to solve real world problems. The term is the prevalent one for these functions in industrial automation environments but is also used for these functions in other environment vehicle guidance. The overall machine vision process includes planning the details of the requirements and project, and then creating a solution. During run-time, the process starts with imaging, followed by automated analysis of the image and extraction of the required information. == Definition == Definitions of the term "Machine vision" vary, but all include the technology and methods used to extract information from an image on an automated basis, as opposed to image processing, where the output is another image. The information extracted can be a simple good-part/bad-part signal, or more a complex set of data such as the identity, position and orientation of each object in an image. The information can be used for such applications as automatic inspection and robot and process guidance in industry, for security monitoring and vehicle guidance. This field encompasses a large number of technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision is practically the only term used for these functions in industrial automation applications; the term is less universal for these functions in other environments such as security and vehicle guidance. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of basic computer science; machine vision attempts to integrate existing technologies in new ways and apply them to solve real world problems in a way that meets the requirements of industrial automation and similar application areas. The term is also used in a broader sense by trade shows and trade groups such as the Automated Imaging Association and the European Machine Vision Association. This broader definition also encompasses products and applications most often associated with image processing. The primary uses for machine vision are automatic inspection and industrial robot/process guidance. In more recent times the terms computer vision and machine vision have converged to a greater degree. See glossary of machine vision. == Imaging based automatic inspection and sorting == The primary uses for machine vision are imaging-based automatic inspection and sorting and robot guidance.; in this section the former is abbreviated as "automatic inspection". The overall process includes planning the details of the requirements and project, and then creating a solution. This section describes the technical process that occurs during the operation of the solution. === Methods and sequence of operation === The first step in the automatic inspection sequence of operation is acquisition of an image, typically using cameras, lenses, and lighting that has been designed to provide the differentiation required by subsequent processing. MV software packages and programs developed in them then employ various digital image processing techniques to extract the required information, and often make decisions (such as pass/fail) based on the extracted information. === Equipment === The components of an automatic inspection system usually include lighting, a camera or other imager, a processor, software, and output devices. === Imaging === The imaging device (e.g. camera) can either be separate from the main image processing unit or combined with it in which case the combination is generally called a smart camera or smart sensor. Inclusion of the full processing function into the same enclosure as the camera is often referred to as embedded processing. When separated, the connection may be made to specialized intermediate hardware, a custom processing appliance, or a frame grabber within a computer using either an analog or standardized digital interface (Camera Link, CoaXPress). MV implementations also use digital cameras capable of direct connections (without a framegrabber) to a computer via FireWire, USB or Gigabit Ethernet interfaces. While conventional (2D visible light) imaging is most commonly used in MV, alternatives include multispectral imaging, hyperspectral imaging, imaging various infrared bands, line scan imaging, 3D imaging of surfaces and X-ray imaging. Key differentiations within MV 2D visible light imaging are monochromatic vs. color, frame rate, resolution, and whether or not the imaging process is simultaneous over the entire image, making it suitable for moving processes. Though the vast majority of machine vision applications are solved using two-dimensional imaging, machine vision applications utilizing 3D imaging are a growing niche within the industry. The most commonly used method for 3D imaging is scanning based triangulation which utilizes motion of the product or image during the imaging process. A laser is projected onto the surfaces of an object. In machine vision this is accomplished with a scanning motion, either by moving the workpiece, or by moving the camera & laser imaging system. The line is viewed by a camera from a different angle; the deviation of the line represents shape variations. Lines from multiple scans are assembled into a depth map or point cloud. Stereoscopic vision is used in special cases involving unique features present in both views of a pair of cameras. Other 3D methods used for machine vision are time of flight and grid based. One method is grid array based systems using pseudorandom structured light system as employed by the Microsoft Kinect system circa 2012. === Image processing === After an image is acquired, it is processed. Central processing functions are generally done by a CPU, a GPU, a FPGA or a combination of these. Deep learning training and inference impose higher processing performance requirements. Multiple stages of processing are generally used in a sequence that ends up as a desired result. A typical sequence might start with tools such as filters which modify the image, followed by extraction of objects, then extraction (e.g. measurements, reading of codes) of data from those objects, followed by communicating that data, or comparing it against target values to create and communicate "pass/fail" results. Machine vision image processing methods include; Stitching/Registration: Combining of adjacent 2D or 3D images. Filtering (e.g. morphological filtering) Thresholding: Thresholding starts with setting or determining a gray value that will be useful for the following steps. The value is then used to separate portions of the image, and sometimes to transform each portion of the image to simply black and white based on whether it is below or above that grayscale value. Pixel counting: counts the number of light or dark pixels Segmentation: Partitioning a digital image into multiple segments to simplify and/or change the representation of an image into something that is more meaningful and easier to analyze. Edge detection: finding object edges Color Analysis: Identify parts, products and items using color, assess quality from color, and isolate features using color. Blob detection and extraction: inspecting an image for discrete blobs of connected pixels (e.g. a black hole in a grey object) as image landmarks. Neural network / deep learning / machine learning processing: weighted and self-training multi-variable decision making Circa 2019 there is a large expansion of this, using deep learning and machine learning to significantly expand machine vision capabilities. The most common result of such processing is classification. Examples of classification are object identification,"pass fail" classification of identified objects and OCR. Pattern recognition including template matching. Finding, matching, and/or counting specific patterns. This may include location of an object that may be rotated, partially hidden by another object, or varying in size. Barcode, Data Matrix and "2D barcode" reading Optical character recognition: automated reading of text such as serial numbers Gauging/Metrology: measurement of object dimensions (e.g. in pixels, inches or millimeters) Comparison against target values to determine a "pass or fail" or "go/no go" result. For example, with code or bar code verification, the read value is compared to the stored target value. For gauging, a measurement is compared against the proper value and tolerances. For verification of alpha-numberic codes, the

  Read more →
• 

  Zynn

  Zynn was a Chinese video-sharing social networking service owned by Kuaishou, a Beijing-based internet technology company established in 2011 by Su Hua and Cheng Yixiao. It was used to create and share short videos, and it pays its users for using the app and referring others. Zynn was launched on May 7, 2020. It became the most-downloaded app in the App Store in the same month. It has also been criticized for being a "pyramid scheme", and it has faced accusations of plagiarism and stealing content. Aside from Zynn in North America, Kuaishou is available under the name Kwai in Russia, South Korea, Japan, Thailand, Vietnam, Philippines, Malaysia, Indonesia, Brazil, America, India, and the Middle East. Kwai used to be available in Australia and the United States on the App Store, but was removed at an unknown date. Zynn was permanently shut down on the 20th of August, 2021. == History == In 2011, entrepreneur Su Hua co-founded Kuaishou with business partner Cheng Yixiao. Originally a GIF-making app, Kuaishou soon moved to short video content. Su Hua also serves as the current Kuaishou CEO. In December 2019, Chinese internet conglomerate Tencent invested $2 billion in Kuaishou, reportedly to compete with rival ByteDance. In December 2019, Kuaishou acquired an app developer called Owlii, which is the developer of Zynn. Zynn was developed to be a North American Market edition of Kuaishou. On May 7, 2020, the app was launched and it was downloaded over 2 million times in that month. On May 12, 2020, Kuaishou filed a lawsuit seeking compensation for "unfair competition", and accused Douyin, the sister app of TikTok, of "interfering" with search results on app stores. Zynn shut down on the 20th of August, 2021. == Features == Zynn allows its users to create, edit and share short videos of themselves. Its interface has been described as a "complete clone" of TikTok, its main competitor. The Zynn app was unique in the way that they paid users for using the platform. Each user earned $1 for signing up, and they could earn money for referring users to the platform. Watching videos resulted in earning "points", which could be redeemed for gift cards or be cashed out via PayPal.[1] == Criticisms and controversies == Multiple TikTok users had reported seeing their entire accounts plagiarized, with one account pretending to be Addison Rae. Despite being launched in May, many videos were posted in February. Zynn has employed "intermittent variable rewards" in its point system, which has been criticized as being the "same reinforcement strategy used to addict people to slot machines". Cash payouts for using the app have resulted in criticism and accusations of anti-competitive behavior. The app was taken down from the Google Play store on June 10. Zynn blamed it on an "isolated incident". Six days later, it was taken down from the App Store as well. US Senator Josh Hawley has criticized the platform, calling it "predatory" and "anti-competitive" in a letter to the Federal Trade Commission asking for an investigation into Zynn. He said "[Zynn] smacks of a textbook predatory-pricing scheme, one calculated to attain immediate market dominance for Zynn by driving competitors out of the market."

  Read more →
• 

  Mixed raster content

  Mixed raster content (MRC) is a method for compressing images that contain both binary-compressible text and continuous-tone components, using image segmentation methods to improve the level of compression and the quality of the rendered image. By separating the image into components with different compressibility characteristics, the most efficient and accurate compression algorithm for each component can be applied. MRC-compressed images are typically packaged into a hybrid file format such as DjVu and sometimes PDF. This allows for multiple images, and the instructions to properly render and reassemble them, to be stored within a single file. Some image scanners optionally support MRC when scanning to PDF. A typical manual states that without MRC, the image is generated in a single process, with text and graphics not distinguished. With MRC, separate processes are used for text, graphics, and other elements, producing clearer graphics and sharper text, at the price of slightly slower processing. MRC is recommended to optimise the scanning of documents with harder-to-read text or lower-quality graphics. MRC can also reduce the size of the scanned file, though higher compression using JBIG2 can sometimes lead to character substitution errors in scanned documents. == File format == A form of MRC is defined by international standard bodies as ISO/IEC 16485, or ITU recommendation T.44 (accessible free of charge). It defines a file format with bilevel masks and two data layers in each "stripe" of the image. The mask can be encoded in ITU T.4, JBIG1, or JBIG2, while the images can be JPEG, JBIG1, or run-length encoded color. The format is loosely based on JPEG, with a APP13 segment registered for this purpose. It is not known whether this file format is actually used, as formats like DjVu and PDF have their own ways of defining layers and masks.

  Read more →
• 

  Automated penetration testing

  Automated penetration testing (also known as autonomous penetration testing or automated offensive security) is the application of software-driven workflows and orchestration to simulate cyberattack techniques. These methods are used to identify, validate, and exploit security vulnerabilities in IT assets such as networks, applications, and cloud infrastructure. Automated penetration testing is the use of software to simulate cyberattacks in order to rapidly identify exploitable vulnerabilities across systems without relying solely on human testers. In technical literature, the term describes a spectrum of activities ranging from scripted exploit orchestration to experimental systems designed for fully autonomous attack planning. Automated Penetration Testing falls short of testing using manual experts in terms of discovery of deep complex vulnerabilities and contextual business logic vulnerabilities. == Terminology and scope == The label “automated penetration testing” appears frequently in vendor and practitioner writing but lacks a single, neutral, standards-based definition. In the literature the term’s scope varies: some authors use it to mean automation of specific penetration-testing tasks (scanning, exploitation attempts, evidence collection), others to describe integrated, repeatable assessment pipelines, and a smaller body of work investigates autonomous decision-making agents that select attack steps algorithmically. To avoid implying consensus, this article describes common techniques and architectures reported in the literature and industry, and it notes where claims are primarily found in practitioner publications or early-stage research. Its important to note the differences between automated penetration testing and traditional penetration testing using human skill. The most important difference is scope and speed. Automated penetration testing generally fails at discovering exposures and weakness associated with business logic due to a lack of contextual understanding. The benefit of Automated Penetration testing is speed at which it can be conducted. Traditional penetration testing also is expected to be accurate and contain no false positives. This is due to the human validation aspect of the test. Automated approaches are expected to contain mistakes and false positives which need to be validated upon completion of the test. == History == Automated offensive techniques build on decades of tools and scripting that aided vulnerability discovery and exploitation. Early vulnerability scanners and community scripting in the 1990s and 2000s created the first layers of automation. Later, modular exploitation frameworks (notably Metasploit) integrated scanning and exploitation modules and made automated proof-of-concept attacks more accessible. Over the 2010s–2020s, as cloud platforms, APIs and continuous delivery practices increased the need for frequent validation, academic and industry interest in formalizing automated approaches also grew. == Methodologies and architectures == Descriptions in the literature and technical reports cluster automated capabilities into several overlapping models: Scripted/engineered playbooks (task automation): Predefined workflows or playbooks encode common attack paths (for example, web application exploit sequences or lateral-movement chains). These playbooks are designed to reproduce known techniques in a controlled way to validate exploitability and reduce manual repetition. Exploit-oriented orchestration: Automation orchestrates exploitation modules from established frameworks to perform controlled proof-of-concept attacks that confirm exploitability rather than simply flagging potential weaknesses. This approach can reduce false positives versus passive scanning when tests are run in an appropriately controlled environment. Orchestrated multi-tool pipelines: A coordinated toolchain integrates reconnaissance, vulnerability scanning, credential testing, exploitation modules and reporting. Data and state persist across stages so that multi-step workflows (e.g., discover → escalate → pivot) can be executed repeatably, approximating manual penetration-test methodologies at larger scale. Continuous / CI-integrated testing: Automation embedded in build or deployment pipelines (CI/CD) triggers assessments automatically on new builds, configuration changes, or on a schedule, supporting frequent, repeatable validation aligned with DevOps practices. Academic theses and experimental work describe CI/CD-integrated proof-of-concept systems for web applications and internal networks. Research on autonomous planning and learning: Recent academic work explores machine learning and reinforcement-learning approaches to select or prioritise attack steps, generate attack sequences, or optimize the testing path; these approaches are largely experimental and raise distinct validation and safety questions. == Tools and vendors == Automated penetration testing is provided by a mix of open-source projects, commercial platforms, and professional services. These often follow the penetration testing as a service (PTaaS) model, which integrates automated scanning with manual validation by security analysts. Examples of widely known tools and vendors in the space include exploitation frameworks such as Metasploit, commercial automated platforms and PTaaS providers, and specialist vendors that offer breach-and-attack simulation (BAS) or continuous testing capabilities. == Applications and deployment models == In industry practice, some organizations deploy automated techniques through dedicated security validation platforms rather than bespoke toolchains. These platforms are typically used for continuous or scheduled validation in pre-production or controlled environments and are often positioned alongside, rather than in place of, human-led penetration testing. Examples discussed in secondary literature include platforms such as Pentera, which are commonly classified under breach-and-attack simulation or automated security validation rather than as standalone penetration-testing methodologies.

  Read more →
• 

  Motor theory of speech perception

  The motor theory of speech perception is the hypothesis that people perceive spoken words by identifying the vocal tract gestures with which they are pronounced rather than by identifying the sound patterns that speech generates. It originally claimed that speech perception is done through a specialized module that is innate and human-specific. Though the idea of a module has been qualified in more recent versions of the theory, the idea remains that the role of the speech motor system is not only to produce speech articulations but also to detect them. The hypothesis has gained more interest outside the field of speech perception than inside. This has increased particularly since the discovery of mirror neurons that link the production and perception of motor movements, including those made by the vocal tract. The theory was initially proposed in the Haskins Laboratories in the 1950s by Alvin Liberman and Franklin S. Cooper, and developed further by Donald Shankweiler, Michael Studdert-Kennedy, Ignatius Mattingly, Carol Fowler and Douglas Whalen. == Origins and development == The hypothesis has its origins in research using pattern playback to create reading machines for the blind that would substitute sounds for orthographic letters. This led to a close examination of how spoken sounds correspond to the acoustic spectrogram of them as a sequence of auditory sounds. This found that successive consonants and vowels overlap in time with one another (a phenomenon known as coarticulation). This suggested that speech is not heard like an acoustic "alphabet" or "cipher," but as a "code" of overlapping speech gestures. === Associationist approach === Initially, the theory was associationist: infants mimic the speech they hear and that this leads to behavioristic associations between articulation and its sensory consequences. Later, this overt mimicry would be short-circuited and become speech perception. This aspect of the theory was dropped, however, with the discovery that prelinguistic infants could already detect most of the phonetic contrasts used to separate different speech sounds. === Cognitivist approach === The behavioristic approach was replaced by a cognitivist one in which there was a speech module. The module detected speech in terms of hidden distal objects rather than at the proximal or immediate level of their input. The evidence for this was the research finding that speech processing was special such as duplex perception. === Changing distal objects === Initially, speech perception was assumed to link to speech objects that were both the invariant movements of speech articulators the invariant motor commands sent to muscles to move the vocal tract articulators This was later revised to include the phonetic gestures rather than motor commands, and then the gestures intended by the speaker at a prevocal, linguistic level, rather than actual movements. === Modern revision === The "speech is special" claim has been dropped, as it was found that speech perception could occur for nonspeech sounds (for example, slamming doors for duplex perception). === Mirror neurons === The discovery of mirror neurons has led to renewed interest in the motor theory of speech perception, and the theory still has its advocates, although there are also critics. == Support == === Nonauditory gesture information === If speech is identified in terms of how it is physically made, then nonauditory information should be incorporated into speech percepts even if it is still subjectively heard as "sounds". This is, in fact, the case. The McGurk effect shows that seeing the production of a spoken syllable that differs from an auditory cue synchronized with it affects the perception of the auditory one. In other words, if someone hears "ba" but sees a video of someone pronouncing "ga", what they hear is different—some people believe they hear "da". People find it easier to hear speech in noise if they can see the speaker. People can hear syllables better when their production can be felt haptically. === Categorical perception === Using a speech synthesizer, speech sounds can be varied in place of articulation along a continuum from /bɑ/ to /dɑ/ to /ɡɑ/, or in voice onset time on a continuum from /dɑ/ to /tɑ/ (for example). When listeners are asked to discriminate between two different sounds, they perceive sounds as belonging to discrete categories, even though the sounds vary continuously. In other words, 10 sounds (with the sound on one extreme being /dɑ/ and the sound on the other extreme being /tɑ/, and the ones in the middle varying on a scale) may all be acoustically different from one another, but the listener will hear all of them as either /dɑ/ or /tɑ/. Likewise, the English consonant /d/ may vary in its acoustic details across different phonetic contexts (the /d/ in /du/ does not technically sound the same as the one in /di/, for example), but all /d/'s as perceived by a listener fall within one category (voiced alveolar plosive) and that is because "linguistic representations are abstract, canonical, phonetic segments or the gestures that underlie these segments." This suggests that humans identify speech using categorical perception, and thus that a specialized module, such as that proposed by the motor theory of speech perception, may be on the right track. === Speech imitation === If people can hear the gestures in speech, then the imitation of speech should be very fast, as in when words are repeated that are heard in headphones as in speech shadowing. People can repeat heard syllables more quickly than they would be able to produce them normally. === Speech production === Hearing speech activates vocal tract muscles, and the motor cortex and premotor cortex. The integration of auditory and visual input in speech perception also involves such areas. Disrupting the premotor cortex disrupts the perception of speech units such as plosives. The activation of the motor areas occurs in terms of the phonemic features which link with the vocal track articulators that create speech gestures. The perception of a speech sound is aided by pre-emptively stimulating the motor representation of the articulators responsible for its pronunciation . Auditory and motor cortical coupling is restricted to a specific range of neuronal firing frequency. === Perception-action meshing === Evidence exists that perception and production are generally coupled in the motor system. This is supported by the existence of mirror neurons that are activated both by seeing (or hearing) an action and when that action is carried out. Another source of evidence is that for common coding theory between the representations used for perception and action. == Criticisms == The motor theory of speech perception is not widely held in the field of speech perception, though it is more popular in other fields, such as theoretical linguistics. As three of its advocates have noted, "it has few proponents within the field of speech perception, and many authors cite it primarily to offer critical commentary".p. 361 Several critiques of it exist. === Multiple sources === Speech perception is affected by nonproduction sources of information, such as context. Individual words are hard to understand in isolation but easy when heard in sentence context. It therefore seems that speech perception uses multiple sources that are integrated together in an optimal way. === Production === The motor theory of speech perception would predict that speech motor abilities in infants predict their speech perception abilities, but in actuality it is the other way around. It would also predict that defects in speech production would impair speech perception, but they do not. However, this only affects the first and already superseded behaviorist version of the theory, where infants were supposed to learn all production-perception patterns by imitation early in childhood. This is no longer the mainstream view of motor-speech theorists. === Speech module === Several sources of evidence for a specialized speech module have failed to be supported. Duplex perception can be observed with door slams. The McGurk effect can also be achieved with nonlinguistic stimuli, such as showing someone a video of a basketball bouncing but playing the sound of a ping-pong ball bouncing. As for categorical perception, listeners can be sensitive to acoustic differences within single phonetic categories. As a result, this part of the theory has been dropped by some researchers. === Sublexical tasks === The evidence provided for the motor theory of speech perception is limited to tasks such as syllable discrimination that use speech units not full spoken words or spoken sentences. As a result, "speech perception is sometimes interpreted as referring to the perception of speech at the sublexical level. However, the ultimate goal of these studies is presumably to understand the neural processes supporting the ability to process spee

  Read more →
• 

  Spotify Live

  Spotify Live, formerly Spotify Greenroom, was a social audio app by Spotify, that allowed users to host or participate in live-audio virtual environments called "room" for conversations. Each room had a maximum capacity of 1000 people. The app was available on Android and iOS, competing with Twitter Spaces and Clubhouse in the social media segment. It was shut down on April 30, 2023. == History == In October 2020, Betty Labs released Locker Room exclusively on the iOS App Store. The app featured virtual audio chat rooms for sports enthusiasts. In late March 2021, Spotify acquired Betty Labs for $50 million and announced plans to rebrand the app with a broader focus on sports, music, and pop culture. On June 16, 2021, Spotify launched the app as Spotify Greenroom on Android (early access) and iOS, expanding its scope beyond just sports. At launch, Spotify introduced the Greenroom Creator Fund to support creators and shows, serving as a rival to Clubhouse's Creator First Accelerator Program. The fund aimed to provide a monetization path for podcasters integrating Greenroom into their verified Spotify accounts. By July 2021, the app had accumulated over 140,000 iOS installs and 100,000 Android installs. In August 2021, Spotify collaborated with the WWE to produce professional wrestling-related podcasts, many of which would be recorded by The Ringer, Spotify's in-house podcasting team, using Greenroom. In March 2022, Spotify Greenroom announced its rebranding as Spotify Live and its migration to the main Spotify app. After a year, Spotify announced it would shut down the Spotify Live app at the end of April 2023. == Features == Greenroom allowed users to create or join a room, which, in the context of the application, was a virtual space for real-time voice chats. Users could only create a room within a pre-defined group, representing either a brand or a generic category. If a user chose to create a room, they became the host, with the ability to invite people, control who could talk, and enable features like recording and the Discussions tab during room creation. Enabling recording displayed a disclaimer informing users that the conversation was being recorded, and the audio, recorded in mp4 format, would be sent to the host via email after the room concluded. If the Discussions tab was enabled, users could send text messages in the public chat section. The host also had the authority to ban users if necessary. When joining a room, a user could opt to be a listener or request to become a speaker. Users had the freedom to follow or block others and join groups at their discretion. Notifications about new rooms in joined groups would be sent to users. Additionally, users could discover new individuals and groups using the search tab. == Partnered creators == By October 2021, Spotify had a variety of partnered creators aimed at boosting traffic and validating its vertically integrated podcast model. These creators primarily focused on Generation Z. In-house Spotify talent, such as The Ringer, produced sports-related content. Simultaneously, the company recruited creators from various social channels to grow Greenroom's audience while also promoting its integration with Spotify and Anchor. Each verified Spotify partner had their Greenroom shows featured in both the Greenroom app and their profiles on the Spotify app. This was part of the company's strategy leading into the 2022 ramp-up to compete with Clubhouse. == Platforms == The app was accessible on both Android and iOS platforms, and users could download the app from their respective app stores. Android users needed Android 8 or above to launch the app, while iOS consumers required iOS 13 or later to run it.

  Read more →
• 

  Vigloo

  Vigloo (Korean: 비글루) is a South Korean microdrama, also known as short-form drama, series streaming platform owned by SpoonLabs, with headquarters in Seoul. It provides content produced in South Korea, Japan, and the United States. Vigloo produced the first AI-created short-form drama in South Korea. == History == Vigloo launched in July 2024. After receiving an equity investment of $86 million (₩120 billion) by South Korean video game company Krafton in September 2024, Vigloo expanded to the U.S. In January 2025, Vigloo unveiled its first in-house produced drama, Xs Who Want to Kill: Adultery Investigation Unit. Vigloo had been testing the use of AI in post-production and visual effects, and in October 2025 released two original dramas produced entirely with AI. It adapted its live action Japanese short-form drama Boyfriend Search Project – Kissing 5 Men into the first short-form animation series made with AI technology in South Korea. Of the top free entertainment iOS apps in South Korea, Vigloo ranks Number 3 as of January 2026. == Service == === Content === Vigloo offers both original and licensed content. It partnered with Passionflix to repackage the latter's original series The Secret Life of Amy Bensen into 35 vertical "bite-sized episodes". The most popular genre is romance, such as romantasy. === Business Model === Vigloo is available around the world, providing subtitles in nine languages, including Korean, English, and Japanese. Fifty percent of Vigloo's revenue comes from the U.S. Vigloo operates on a freemium model, where viewers can try several episodes and then can choose to continue by subscription or in-app purchases. As of September 2025, 70% of Vigloo viewers were over 35 years old. === Microdramas === Emerging during the early COVID period in China, microdramas have grown into a 7-billion-dollar market with dozens of dedicated platforms now operating. Although the format first expanded across Asia, short-form scripted content optimized for mobile viewing is increasingly being produced and watched in markets worldwide. == Series == A Vampire in the Alpha's Den Fight for Love Matrimoney Signed, Sealed, Deceived by My Billionaire Mailboy Spring Break Bucket List Stake to the Heart

  Read more →