AI Chatbot Interface

AI Chatbot Interface — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Feed forward (control)

  A feed forward (sometimes written feedforward) is an element or pathway within a control system that passes a controlling signal from a source in its external environment to a load elsewhere in its external environment. This is often a command signal from an external operator. In control engineering, a feedforward control system is a control system that uses sensors to detect disturbances affecting the system and then applies an additional input to minimize the effect of the disturbance. This requires a mathematical model of the system so that the effect of disturbances can be properly predicted. A control system which has only feed-forward behavior responds to its control signal in a pre-defined way without responding to the way the system reacts; it is in contrast with a system that also has feedback, which adjusts the input to take account of how it affects the system, and how the system itself may vary unpredictably. In a feed-forward system, the control variable adjustment is not error-based. Instead it is based on knowledge about the process in the form of a mathematical model of the process and knowledge about, or measurements of, the process disturbances. Some prerequisites are needed for control scheme to be reliable by pure feed-forward without feedback: the external command or controlling signal must be available, and the effect of the output of the system on the load should be known (that usually means that the load must be predictably unchanging with time). Sometimes pure feed-forward control without feedback is called 'ballistic', because once a control signal has been sent, it cannot be further adjusted; any corrective adjustment must be by way of a new control signal. In contrast, 'cruise control' adjusts the output in response to the load that it encounters, by a feedback mechanism. These systems could relate to control theory, physiology, or computing. == Overview == With feed-forward or feedforward control, the disturbances are measured and accounted for before they have time to affect the system. In the house example, a feed-forward system may measure the fact that the door is opened and automatically turn on the heater before the house can get too cold. The difficulty with feed-forward control is that the effects of the disturbances on the system must be accurately predicted, and there must not be any unmeasured disturbances. For instance, if a window was opened that was not being measured, the feed-forward-controlled thermostat might let the house cool down. The term has specific meaning within the field of CPU-based automatic control. The discipline of feedforward control as it relates to modern, CPU based automatic controls is widely discussed, but is seldom practiced due to the difficulty and expense of developing or providing for the mathematical model required to facilitate this type of control. Open-loop control and feedback control, often based on canned PID control algorithms, are much more widely used. There are three types of control systems: open-loop, feed-forward, and feedback. An example of a pure open-loop control system is manual non-power-assisted steering of a motor car; the steering system does not have access to an auxiliary power source and does not respond to varying resistance to turning of the direction wheels; the driver must make that response without help from the steering system. In comparison, power steering has access to a controlled auxiliary power source, which depends on the engine speed. When the steering wheel is turned, a valve is opened which allows fluid under pressure to turn the wheels. A sensor monitors that pressure so that the valve only opens enough to cause the correct pressure to reach the wheel turning mechanism. This is feed-forward control where the output of the system, the change in direction of travel of the vehicle, plays no part in the system. See Model predictive control. If the driver is included in the system, then they do provide a feedback path by observing the direction of travel and compensating for errors by turning the steering wheel. In that case you have a feedback system, and the block labeled System in Figure(c) is a feed-forward system. In other words, systems of different types can be nested, and the overall system regarded as a black-box. Feedforward control is distinctly different from open-loop control and teleoperator systems. Feedforward control requires a mathematical model of the plant (process and/or machine being controlled) and the plant's relationship to any inputs or feedback the system might receive. Neither open-loop control nor teleoperator systems require the sophistication of a mathematical model of the physical system or plant being controlled. Control based on operator input without integral processing and interpretation through a mathematical model of the system is a teleoperator system and is not considered feedforward control. == History == Historically, the use of the term feedforward is found in works by Harold S. Black in US patent 1686792 (invented 17 March 1923) and D. M. MacKay as early as 1956. While MacKay's work is in the field of biological control theory, he speaks only of feedforward systems. MacKay does not mention feedforward control or allude to the discipline of feedforward controls. MacKay and other early writers who use the term feedforward are generally writing about theories of how human or animal brains work. Black also has US patent 2102671 invented 2 August 1927 on the technique of feedback applied to electronic systems. The discipline of feedforward controls was largely developed by professors and graduate students at Georgia Tech, MIT, Stanford and Carnegie Mellon. Feedforward is not typically hyphenated in scholarly publications. Meckl and Seering of MIT and Book and Dickerson of Georgia Tech began the development of the concepts of Feedforward Control in the mid-1970s. The discipline of Feedforward Controls was well defined in many scholarly papers, articles and books by the late 1980s. == Benefits == The benefits of feedforward control are significant and can often justify the extra cost, time and effort required to implement the technology. Control accuracy can often be improved by as much as an order of magnitude if the mathematical model is of sufficient quality and implementation of the feedforward control law is well thought out. Energy consumption by the feedforward control system and its driver is typically substantially lower than with other controls. Stability is enhanced such that the controlled device can be built of lower cost, lighter weight, springier materials while still being highly accurate and able to operate at high speeds. Other benefits of feedforward control include reduced wear and tear on equipment, lower maintenance costs, higher reliability and a substantial reduction in hysteresis. Feedforward control is often combined with feedback control to optimize performance. == Model == The mathematical model of the plant (machine, process or organism) used by the feedforward control system may be created and input by a control engineer or it may be learned by the control system. Control systems capable of learning and/or adapting their mathematical model have become more practical as microprocessor speeds have increased. The discipline of modern feedforward control was itself made possible by the invention of microprocessors. Feedforward control requires integration of the mathematical model into the control algorithm such that it is used to determine the control actions based on what is known about the state of the system being controlled. In the case of control for a lightweight, flexible robotic arm, this could be as simple as compensating between when the robot arm is carrying a payload and when it is not. The target joint angles are adjusted to place the payload in the desired position based on knowing the deflections in the arm from the mathematical model's interpretation of the disturbance caused by the payload. Systems that plan actions and then pass the plan to a different system for execution do not satisfy the above definition of feedforward control. Unless the system includes a means to detect a disturbance or receive an input and process that input through the mathematical model to determine the required modification to the control action, it is not true feedforward control. === Open system === In control theory, an open system is a feed forward system that does not have any feedback loop to control its output. In contrast, a closed system uses on a feedback loop to control the operation of the system. In an open system, the output of the system is not fed back into the input to the system for control or operation. == Applications == === Physiological feed-forward system === In physiology, feed-forward control is exemplified by the normal anticipatory regulation of heartbeat in advance of actual physical exertion by the central autonomic network. Feed-forward

  Read more →
• 

  Svelte

  Svelte is a free and open-source component-based front-end software framework and language created by Rich Harris and maintained by the Svelte core team. Svelte is not a monolithic JavaScript library imported by applications: instead, Svelte compiles HTML templates to specialized code that manipulates the DOM directly, which may reduce the size of transferred files and give better client performance. Application code is also processed by the compiler, inserting calls to automatically recompute data and re-render UI elements when the data they depend on is modified. This also avoids the overhead associated with runtime intermediate representations, such as virtual DOM, unlike traditional frameworks (such as React and Vue) which carry out the bulk of their work at runtime, i.e. in the browser. The compiler itself is written in JavaScript. Its source code is licensed under MIT License and hosted on GitHub. Among comparable frontend libraries, Svelte has one of the smallest bundle footprints at merely 2KB. == History == The predecessor of Svelte is Ractive.js, which Rich Harris created in 2013. Version 1 of Svelte was written in JavaScript and was released on 29 November 2016. The name Svelte was chosen by Rich Harris and his coworkers at The Guardian. Version 2 of Svelte was released on 19 April 2018. It set out to correct what the maintainers viewed as mistakes in the earlier version such as replacing double curly braces with single curly braces. Version 3 of Svelte was written in TypeScript and was released on 21 April 2019. It rethought reactivity by using the compiler to instrument assignments behind the scenes. The SvelteKit web framework was announced in October 2020 and entered beta in March 2021. SvelteKit 1.0 was released in December 2022 after two years in development. Version 4 of Svelte was released on 22 June 2023. It was a maintenance release, smaller and faster than version 3. A part of this release was an internal rewrite from TypeScript back to JavaScript, with JSDoc type annotations. This was met with confusion from the developer community, which was addressed by the creator of Svelte, Rich Harris. Version 5 of Svelte was released on October 19, 2024 at Svelte Summit Fall 2024 with Rich Harris cutting the release live while joined by other Svelte maintainers. Svelte 5 was a ground-up rewrite of Svelte, changing core concepts such as reactivity and reusability. Its primary feature, runes, reworked how reactive state is declared and used. Runes are function-like macros that are used to declare a reactive state, or code that uses reactive states. These runes are used by the compiler to indicate values that may change and are depended on by other states or the DOM. Svelte 5 also introduces Snippets, which are reusable "snippets" of code that are defined once and can be reused anywhere else in the component. Svelte 5 was initially met with controversy due to its many changes, and thus deprecations caused primarily by runes. However, most of this has subsided since the initial announcement of runes, and the further refining of Svelte 5. Also at Svelte Summit Fall 2024, Ben McCann announced the Svelte CLI under the sv package name on npm. In early 2025, the Svelte team announced Asynchronous Svelte, an experimental feature set centered around asynchronous reactivity in Svelte using await expressions. As of August 2025, the feature is available via an experimental compiler option. This coincided with the experimental release of remote functions, an RPC feature in SvelteKit, Svelte's metaframework. Key early contributors to Svelte became involved with Conduitry joining with the release of Svelte 1, Tan Li Hau joining in 2019, and Ben McCann joining in 2020. Rich Harris and Simon Holthausen joined Vercel to work on Svelte fulltime in 2022. Dominic Gannaway joined Vercel from the React core team to work on Svelte fulltime in 2023. == Syntax == Svelte applications and components are defined in .svelte files, which are HTML files extended with templating syntax that is based on JavaScript and is similar to JSX. Svelte's core features are accessed through runes, which syntactically look like functions, but are used as macros by the compiler. These runes include: The $state rune, used for declaring a reactive state value The $derived rune, used for declaring reactive state derived from one or more states The $effect rune, used for declaring code that reruns whenever its dependencies change Starting with Svelte 5, the framework introduced a significant reactivity overhaul that replaces the previous `$:` reactive declarations with new runes such as $state, $derived, and $effect. The $effect rune is now used for post-render operations without modifying state, while $derived is used for computations that depend on other reactive values. This change aims to simplify the mental model of reactivity and make component logic more explicit. Additionally, the { JavaScript code } syntax can be used for templating in HTML elements and components, similar to template literals in JavaScript. This syntax can also be used in element attributes for uses such as two-way data binding, event listeners, and CSS styling. A Todo List example made in Svelte is below: == Associated projects == The Svelte maintainers created SvelteKit as the official way to build projects with Svelte. It is a Next.js/Nuxt-style full-stack framework that dramatically reduces the amount of code that gets sent to the browser. The maintainers had previously created Sapper, which was the predecessor of SvelteKit. The Svelte maintainers also maintain a number of integrations for popular software projects under the Svelte organization including integrations for Vite, Rollup, Webpack, TypeScript, VS Code, Chrome Developer Tools, ESLint, and Prettier. A number of external projects such as Storybook have also created integrations with Svelte and SvelteKit. == Influence == Vue.js modeled its API and single-file components after Ractive.js, the predecessor of Svelte. == Adoption == Svelte is widely praised by developers. Taking the top ranking in multiple large scale developer surveys, it was chosen as the Stack Overflow 2021 most loved web framework and 2020 State of JS frontend framework with the most satisfied developers. Recent surveys continue to show Svelte's strong developer satisfaction, with the 2024 State of JS survey maintaining its position among the most praised frontend frameworks. The 2024 Stack Overflow Developer Survey reported that 73% of developers who used Svelte want to continue working with it, and noted that Stack Overflow's own team used Svelte for building their 2024 Developer Survey results site. Svelte has been adopted by a number of high-profile web companies including The New York Times, Google, Apple, Spotify, Radio France, Square, Yahoo, ByteDance, Rakuten, Bloomberg, Reuters, Ikea, Facebook, Logitech, and Brave. A community group of primarily non-maintainers, known as the Svelte Society, run the Svelte Summit conference, write a Svelte newsletter, host a Svelte podcast, and host a directory of Svelte tooling, components, and templates.

  Read more →
• 

  VHS

  VHS (Video Home System) is a discontinued standard for consumer-level analog video recording on tape cassettes, introduced in 1976 by JVC. It was the dominant home video format throughout the tape media period of the 1980s and 1990s. Magnetic tape video recording was adopted by the television industry in the 1950s in the form of the first commercialized video tape recorders (VTRs), but the devices were expensive and used only in professional environments. In the 1970s, videotape technology became affordable for home use, and widespread adoption of videocassette recorders (VCRs) began; the VHS became the most popular media format for VCRs as it would win the "format war" against Betamax (backed by Sony) and a number of other competing tape standards. The cassettes themselves use a 0.5-inch (12.7 mm) magnetic tape between two spools and typically offer a capacity of at least two hours. The popularity of VHS was intertwined with the rise of the video rental market, when films were released on pre-recorded videotapes for home viewing. Newer improved tape formats such as S-VHS were later developed, as well as the earliest optical disc format, LaserDisc; the lack of global adoption of these formats increased VHS's lifetime, which eventually peaked and started to decline in the late 1990s after the introduction of DVD, a digital optical disc format. VHS rentals were surpassed by DVD in the United States in 2003, which eventually became the preferred low-end method of movie distribution. For home recording purposes, VHS and VCRs were surpassed by (typically hard disk–based) digital video recorders (DVR) in the 2000s. Production of all VHS equipment ceased by 2016, although the format has since gained some popularity amongst collectors. A niche revival of VHS has taken place with This Is How The World Ends becoming the first straight-to-VHS release in 20 years. == History == === Before VHS === In 1956, after several attempts by other companies, the first commercially successful VTR, the Ampex VRX-1000, was introduced by Ampex Corporation. At a price of US$50,000 in 1956 (equivalent to $592,000 in 2025) and US$300 (equivalent to $3,600 in 2025) for a 90-minute reel of tape, it was intended only for the professional market. Kenjiro Takayanagi, a television broadcasting pioneer then working for JVC as its vice president, saw the need for his company to produce VTRs for the Japanese market at a more affordable price. In 1959, JVC developed a two-head video tape recorder and, by 1960, a color version for professional broadcasting. In 1964, JVC released the DV220, which would be the company's standard VTR until the mid-1970s. In 1969, JVC collaborated with Sony and Matsushita Electric (Matsushita was the majority stockholder of JVC until 2011) to build a video recording standard for the Japanese consumer. The effort produced the U-matic format in 1971, which was the first cassette format to become a unified standard for different companies. It was preceded by the reel-to-reel 1⁄2-inch EIAJ format. The U-matic format was successful in businesses and some broadcast television applications, such as electronic news-gathering, and was produced by all three companies until the late 1980s, but because of cost and limited recording time, very few of the machines were sold for home use. Therefore, soon after the U-Matic release, all three companies started working on new consumer-grade video recording formats of their own. Sony started working on Betamax, Matsushita started working on VX, and JVC released the CR-6060 in 1975, based on the U-matic format. === VHS development === In 1971, JVC engineers Yuma Shiraishi and Shizuo Takano put together a team to develop a VTR for consumers. By the end of 1971, they created an internal diagram, "VHS Development Matrix", which established twelve objectives for JVC's new VTR; among them: The system must be compatible with any ordinary television set. Picture quality must be similar to a normal air broadcast. The tape must have at least a two-hour recording capacity. Tapes must be interchangeable between machines. The overall system should be versatile, meaning it can be scaled and expanded, such as connecting a video camera, or dubbing between two recorders. Recorders should be affordable, easy to operate, and have low maintenance costs. Recorders must be capable of being produced in high volume, their parts must be interchangeable, and they must be easy to service. In early 1972, the commercial video recording industry in Japan took a financial hit. JVC cut its budgets and restructured its video division, shelving the VHS project. However, despite the lack of funding, Takano and Shiraishi continued to work on the project in secret. By 1973, the two engineers had produced a functional prototype. === Competition with Betamax === In 1974, the Japanese Ministry of International Trade and Industry (MITI), desiring to avoid consumer confusion, attempted to force the Japanese video industry to standardize on just one home video recording format. Later, Sony had a functional prototype of the Betamax format, and was very close to releasing a finished product. With this prototype, Sony persuaded the MITI to adopt Betamax as the standard, and allow it to license the technology to other companies. JVC believed that an open standard, with the format shared among competitors without licensing the technology, was better for the consumer. To prevent the MITI from adopting Betamax, JVC worked to convince other companies, in particular Matsushita (Japan's largest electronics manufacturer at the time, marketing its products under the National brand in most territories and the Panasonic brand in North America, and JVC's majority stockholder), to accept VHS, and thereby work against Sony and the MITI. Matsushita agreed, fearing Sony would dominate the market with a Betamax monopoly. Matsushita also regarded Betamax's one-hour recording time limit as a disadvantage. Matsushita's backing of JVC persuaded Hitachi, Mitsubishi, and Sharp to back the VHS standard as well. Sony's release of its Betamax unit to the Japanese market in 1975 placed further pressure on the MITI to side with the company. However, the collaboration of JVC and its partners was much stronger, which eventually led the MITI to drop its push for an industry standard. JVC released the first VHS machines in Japan in late 1976, and in the United States in mid-1977. Sony's Betamax competed with VHS throughout the late 1970s and into the 1980s (see Videotape format war). Betamax's major advantages were its smaller cassette size, theoretical higher video quality, and earlier availability, but its shorter recording time proved to be a major shortcoming. Originally, Beta I machines using the NTSC television standard were able to record one hour of programming at their standard tape speed of 1.5 inches per second (ips). The first VHS machines could record for two hours, due to both a slightly slower tape speed (1.31 ips) and significantly longer tape. Betamax's smaller cassette limited the size of the reel of tape, and could not compete with VHS's two-hour capability by extending the tape length. Instead, Sony had to slow the tape down to 0.787 ips (Beta II) in order to achieve two hours of recording in the same cassette size. Sony eventually created a Beta III speed of 0.524 ips, which allowed NTSC Betamax to break the two-hour limit, but by then VHS had already won the format battle. Additionally, VHS had a "far less complex tape transport mechanism" than Betamax, and VHS machines were faster at rewinding and fast-forwarding than their Sony counterparts. VHS eventually won the war, gaining 60% of the North American market by 1980. == Initial releases of VHS-based devices == The first VCR to use VHS was the Victor HR-3300, and was introduced by the president of JVC in Japan on September 9, 1976. JVC started selling the HR-3300 in Akihabara, Tokyo, Japan, on October 31, 1976. Region-specific versions of the JVC HR-3300 were also distributed later on, such as the HR-3300U in the United States, and the HR-3300EK in the United Kingdom. The United States received its first VHS-based VCR, the RCA VBT200, on August 23, 1977. The RCA unit was designed by Matsushita and was the first VHS-based VCR manufactured by a company other than JVC. It was also capable of recording four hours in LP (long play) mode. The UK received its first VHS-based VCR, the Victor HR-3300EK, in 1978. Quasar and General Electric followed-up with VHS-based VCRs – all designed by Matsushita. By 1999, Matsushita alone produced just over half of all Japanese VCRs. TV/VCR combos, combining a TV set with a VHS mechanism, were also once available for purchase. Combo units containing both a VHS mechanism and a DVD player were introduced in the late 1990s, and at least one combo unit, the Panasonic DMP-BD70V, included a Blu-ray player. == Technical details == VHS has been standardized in IEC 60774–1. === Cassette and

  Read more →
• 

  Signal-to-crosstalk ratio

  The signal-to-crosstalk ratio at a specified point in a circuit is the ratio of the power of the wanted signal to the power of the unwanted signal from another channel. The signals are adjusted in each channel so that they are of equal power at the zero transmission level point in their respective channels. The signal-to-crosstalk ratio is usually expressed in dB.

  Read more →
• 

  Conditional random field

  Conditional random fields (CRFs) are a class of statistical modeling methods often applied in pattern recognition and machine learning and used for structured prediction. Whereas a classifier predicts a label for a single sample without considering "neighbouring" samples, a CRF can take context into account. To do so, the predictions are modelled as a graphical model, which represents the presence of dependencies between the predictions. The kind of graph used depends on the application. For example, in natural language processing, "linear chain" CRFs are popular, for which each prediction is dependent only on its immediate neighbours. In image processing, the graph typically connects locations to nearby and/or similar locations to enforce that they receive similar predictions. Other examples where CRFs are used are: labeling or parsing of sequential data for natural language processing or biological sequences, part-of-speech tagging, shallow parsing, named entity recognition, gene finding, peptide critical functional region finding, and object recognition and image segmentation in computer vision. == Description == CRFs are a type of discriminative undirected probabilistic graphical model. Lafferty, McCallum and Pereira define a CRF on observations X {\displaystyle {\boldsymbol {X}}} and random variables Y {\displaystyle {\boldsymbol {Y}}} as follows: Let G = ( V , E ) {\displaystyle G=(V,E)} be a graph such that Y = ( Y v ) v ∈ V {\displaystyle {\boldsymbol {Y}}=({\boldsymbol {Y}}_{v})_{v\in V}} , so that Y {\displaystyle {\boldsymbol {Y}}} is indexed by the vertices of G {\displaystyle G} . Then ( X , Y ) {\displaystyle ({\boldsymbol {X}},{\boldsymbol {Y}})} is a conditional random field when each random variable Y v {\displaystyle {\boldsymbol {Y}}_{v}} , conditioned on X {\displaystyle {\boldsymbol {X}}} , obeys the Markov property with respect to the graph; that is, its probability is dependent only on its neighbours in G and not its past states: P ( Y v | X , { Y w : w ≠ v } ) = P ( Y v | X , { Y w : w ∼ v } ) {\displaystyle P({\boldsymbol {Y}}_{v}|{\boldsymbol {X}},\{{\boldsymbol {Y}}_{w}:w\neq v\})=P({\boldsymbol {Y}}_{v}|{\boldsymbol {X}},\{{\boldsymbol {Y}}_{w}:w\sim v\})} , where w ∼ v {\displaystyle {\mathit {w}}\sim v} means that w {\displaystyle w} and v {\displaystyle v} are neighbors in G {\displaystyle G} . What this means is that a CRF is an undirected graphical model whose nodes can be divided into exactly two disjoint sets X {\displaystyle {\boldsymbol {X}}} and Y {\displaystyle {\boldsymbol {Y}}} , the observed and output variables, respectively; the conditional distribution p ( Y | X ) {\displaystyle p({\boldsymbol {Y}}|{\boldsymbol {X}})} is then modeled. === Inference === For general graphs, the problem of exact inference in CRFs is intractable. The inference problem for a CRF is basically the same as for an MRF and the same arguments hold. However, there exist special cases for which exact inference is feasible: If the graph is a chain or a tree, message passing algorithms yield exact solutions. The algorithms used in these cases are analogous to the forward-backward and Viterbi algorithm for the case of HMMs. If the CRF only contains pair-wise potentials and the energy is submodular, combinatorial min cut/max flow algorithms yield exact solutions. If exact inference is impossible, several algorithms can be used to obtain approximate solutions. These include: Loopy belief propagation Alpha expansion Mean field inference Linear programming relaxations === Parameter learning === Learning the parameters θ {\displaystyle \theta } is usually done by maximum likelihood learning for p ( Y i | X i ; θ ) {\displaystyle p(Y_{i}|X_{i};\theta )} . If all nodes have exponential family distributions and all nodes are observed during training, this optimization is convex. It can be solved for example using gradient descent algorithms, or Quasi-Newton methods such as the L-BFGS algorithm. On the other hand, if some variables are unobserved, the inference problem has to be solved for these variables. Exact inference is intractable in general graphs, so approximations have to be used. === Examples === In sequence modeling, the graph of interest is usually a chain graph. An input sequence of observed variables X {\displaystyle X} represents a sequence of observations and Y {\displaystyle Y} represents a hidden (or unknown) state variable that needs to be inferred given the observations. The Y i {\displaystyle Y_{i}} are structured to form a chain, with an edge between each Y i − 1 {\displaystyle Y_{i-1}} and Y i {\displaystyle Y_{i}} . As well as having a simple interpretation of the Y i {\displaystyle Y_{i}} as "labels" for each element in the input sequence, this layout admits efficient algorithms for: model training, learning the conditional distributions between the Y i {\displaystyle Y_{i}} and feature functions from some corpus of training data. decoding, determining the probability of a given label sequence Y {\displaystyle Y} given X {\displaystyle X} . inference, determining the most likely label sequence Y {\displaystyle Y} given X {\displaystyle X} . The conditional dependency of each Y i {\displaystyle Y_{i}} on X {\displaystyle X} is defined through a fixed set of feature functions of the form f ( i , Y i − 1 , Y i , X ) {\displaystyle f(i,Y_{i-1},Y_{i},X)} , which can be thought of as measurements on the input sequence that partially determine the likelihood of each possible value for Y i {\displaystyle Y_{i}} . The model assigns each feature a numerical weight and combines them to determine the probability of a certain value for Y i {\displaystyle Y_{i}} . Linear-chain CRFs have many of the same applications as conceptually simpler hidden Markov models (HMMs), but relax certain assumptions about the input and output sequence distributions. An HMM can loosely be understood as a CRF with very specific feature functions that use constant probabilities to model state transitions and emissions. Conversely, a CRF can loosely be understood as a generalization of an HMM that makes the constant transition probabilities into arbitrary functions that vary across the positions in the sequence of hidden states, depending on the input sequence. Notably, in contrast to HMMs, CRFs can contain any number of feature functions, the feature functions can inspect the entire input sequence X {\displaystyle X} at any point during inference, and the range of the feature functions need not have a probabilistic interpretation. == Variants == === Higher-order CRFs and semi-Markov CRFs === CRFs can be extended into higher order models by making each Y i {\displaystyle Y_{i}} dependent on a fixed number k {\displaystyle k} of previous variables Y i − k , . . . , Y i − 1 {\displaystyle Y_{i-k},...,Y_{i-1}} . In conventional formulations of higher order CRFs, training and inference are only practical for small values of k {\displaystyle k} (such as k ≤ 5), since their computational cost increases exponentially with k {\displaystyle k} . However, another recent advance has managed to ameliorate these issues by leveraging concepts and tools from the field of Bayesian nonparametrics. Specifically, the CRF-infinity approach constitutes a CRF-type model that is capable of learning infinitely-long temporal dynamics in a scalable fashion. This is effected by introducing a novel potential function for CRFs that is based on the Sequence Memoizer (SM), a nonparametric Bayesian model for learning infinitely-long dynamics in sequential observations. To render such a model computationally tractable, CRF-infinity employs a mean-field approximation of the postulated novel potential functions (which are driven by an SM). This allows for devising efficient approximate training and inference algorithms for the model, without undermining its capability to capture and model temporal dependencies of arbitrary length. There exists another generalization of CRFs, the semi-Markov conditional random field (semi-CRF), which models variable-length segmentations of the label sequence Y {\displaystyle Y} . This provides much of the power of higher-order CRFs to model long-range dependencies of the Y i {\displaystyle Y_{i}} , at a reasonable computational cost. Finally, large-margin models for structured prediction, such as the structured Support Vector Machine can be seen as an alternative training procedure to CRFs. === Latent-dynamic conditional random field === Latent-dynamic conditional random fields (LDCRF) or discriminative probabilistic latent variable models (DPLVM) are a type of CRFs for sequence tagging tasks. They are latent variable models that are trained discriminatively. In an LDCRF, like in any sequence tagging task, given a sequence of observations x = x 1 , … , x n {\displaystyle x_{1},\dots ,x_{n}} , the main problem the model must solve is how to assign a sequence of labels y = y 1 , … , y n {\displaystyle y_{1},\dots ,y_{n}} from one finite set

  Read more →
• 

  New media

  New media are communication technologies that enable or enhance interaction between users, as well as interaction between users and content. In the middle of the 1990s, the phrase "new media" became widely used as part of a sales pitch for the influx of interactive CD-ROMs for entertainment and education. The new media technologies, sometimes known as Web 2.0, include a wide range of web-related communication tools such as blogs, wikis, online social networking, virtual worlds, and other social media platforms. The phrase "new media" refers to computational media that share material online and through computers. New media inspire new ways of thinking about older media. Media do not replace one another in a clear, linear succession, instead evolving in a more complicated network of interconnected feedback loops . What is different about new media is how they specifically refashion traditional media and how older media refashion themselves to meet the challenges of new media. Unless they contain technologies that enable digital generative or interactive processes, broadcast television programs, non-interactive news websites, feature films, magazines, and books are not considered to be new media. The term "new media" stands in contrast to old media, which dominated the media landscape as a form of mass media for many years. == History == In the 1950s, connections between computing and radical art began to grow stronger. It was not until the 1980s that Alan Kay and his co-workers at Xerox PARC began to give the computability of a personal computer to the individual, rather than have a big organization be in charge of this. In the late 1980s and early 1990s, however, we seem to witness a different kind of parallel relationship between social changes and computer design. Although causally unrelated, conceptually, it makes sense that the Cold War and the design of the Web took place at exactly the same time. Writers and philosophers such as Marshall McLuhan were instrumental in the development of media theory during this period which is now famous declaration in Understanding Media: The Extensions of Man, that "the medium is the message" drew attention to the too often ignored influence media and technology themselves, rather than their "content," have on humans' experience of the world and on society broadly. Until the 1980s, media relied primarily upon print and analog broadcast models such as television and radio. The last twenty-five years have seen the rapid transformation into media which are predicated upon the use of digital technologies such as the Internet and video games. However, these examples are only a small representation of new media. The use of digital computers has transformed the remaining 'old' media, as suggested by the advent of digital television and online publications. Even traditional media forms such as the printing press have been transformed through the application of technologies by using of image manipulation software like Adobe Photoshop and desktop publishing tools. Andrew L. Shapiro argues that the "emergence of new, digital technologies signals a potentially radical shift of who is in control of information, experience and resources". W. Russell Neuman suggests that whilst the "new media" have technical capabilities to pull in one direction, economic and social forces pull back in the opposite direction. According to Neuman, "We are witnessing the evolution of a universal interconnected network of audio, video, and electronic text communications that will blur the distinction between interpersonal and mass communication; and between public and private communication". Neuman argues that new media will: Alter the meaning of geographic distance. Allow for a huge increase in the volume of communication. Provide the possibility of increasing the speed of communication. Provide opportunities for interactive communication. Allow forms of communication that were previously separate to overlap and interconnect. Consequently, it has been the contention of scholars such as Douglas Kellner and James Bohman that new media and particularly the Internet will provide the potential for a democratic postmodern public sphere, in which citizens can participate in well informed, non-hierarchical debate pertaining to their social structures. Contradicting these positive appraisals of the potential social impacts of new media are scholars such as Edward S. Herman and Robert McChesney who have suggested that the transition to new media has seen a handful of powerful transnational telecommunications corporations who achieve a level of global influence which was hitherto unimaginable. Scholars have highlighted both the positive and negative potential and actual implications of new media technologies, suggesting that some of the early work in new media studies was guilty of technologicaldeterminism – whereby the effects of media were determined by the technologies themselves, rather than by tracing the complex social networks that governed the development, funding, implementation, and future evolution of any technology. Based on the argument that people have a limited amount of time to spend on the consumption of different media, displacement theory argue that the viewership or readership of one particular outlet leads to the reduction in the amount of time spent by the individual on another. The introduction of new media, such as the internet, therefore reduces the amount of time individuals would spend on existing "old" media, which could ultimately lead to the end of such traditional media. == Definition == Although, there are several ways that new media may be described, Lev Manovich, in an introduction to The New Media Reader, defines new media by using eight propositions: New media versus cyberculture – Cyberculture is the various social phenomena that are associated with the Internet and network communications (blogs, online multi-player gaming), whereas new media is concerned more with cultural objects and paradigms (digital to analog television, smartphones). New media as computer technology used as a distribution platform – New media are the cultural objects which use digital computer technology for distribution and exhibition. e.g. (at least for now) Internet, Web sites, computer multimedia, Blu-ray disks etc. The problem with this is that the definition must be revised every few years. The term "new media" will not be "new" anymore, as most forms of culture will be distributed through computers. New media as digital data controlled by software – The language of new media is based on the assumption that, in fact, all cultural objects that rely on digital representation and computer-based delivery do share a number of common qualities. New media is reduced to digital data that can be manipulated by software as any other data. Now media operations can create several versions of the same object. An example is an image stored as matrix data which can be manipulated and altered according to the additional algorithms implemented, such as color inversion, gray-scaling, sharpening, rasterizing, etc. New media as the mix between existing cultural conventions and the conventions of software – New media today can be understood as the mix between older cultural conventions for data representation, access, and manipulation and newer conventions of data representation, access, and manipulation. The "old" data are representations of visual reality and human experience, and the "new" data is numerical data. The computer is kept out of the key "creative" decisions, and is delegated to the position of a technician. e.g. In film, software is used in some areas of production, in others are created using computer animation. New media as the aesthetics that accompanies the early stage of every new modern media and communication technology – While ideological tropes indeed seem to be reappearing rather regularly, many aesthetic strategies may reappear two or three times ... In order for this approach to be truly useful it would be insufficient to simply name the strategies and tropes and to record the moments of their appearance; instead, we would have to develop a much more comprehensive analysis which would correlate the history of technology with social, political, and economical histories or the modern period. New media as faster execution of algorithms previously executed manually or through other technologies – Computers are a huge speed-up of what were previously manual techniques. e.g. calculators. Dramatically speeding up the execution makes possible previously non-existent representational technique. This also makes possible of many new forms of media art such as interactive multimedia and video games. On one level, a modern digital computer is just a faster calculator, we should not ignore its other identity: that of a cybernetic control device. New media as the encoding of modernist avant-garde; new media as metamedia – Manovi

  Read more →
• 

  VibeOS

  VibeOS is an operating system built from scratch entirely by generative artificial intelligence, using code produced through prompts to Claude (vibe coding). It is capable of running on QEMU and was successfully tested on a Raspberry Pi Zero. It has been released under the MIT license. == Features == === Core === Custom kernel with cooperative multitasking (preemptive backup) FAT32 filesystem with long filename support Memory allocator, process scheduler, interrupt handling GIC-400 (QEMU) and BCM2836/BCM2835 (Pi) interrupt controllers Configurable boot (splash screen, boot target) === GUI === Desktop environment with draggable windows Menu bar, dock, window minimize/maximize/close Mouse and keyboard input Modern macOS-inspired aesthetic === Networking === Full TCP/IP stack (Ethernet, ARP, IP, ICMP, UDP, TCP) DNS resolver HTTP client TLS 1.2 with HTTPS support === Apps === Web browser with HTML/CSS rendering Terminal emulator with readline-style shell Text editor (vim clone) with syntax highlighting File manager with drag-and-drop Music player (MP3/WAV) Calculator, system monitor VibeCode IDE Doom port === Development === TCC (Tiny C Compiler) - compile C programs directly on VibeOS MicroPython interpreter with full kernel API bindings 60+ userspace programs (coreutils, games, GUI apps) === Hardware === Runs on Raspberry Pi Zero 2W USB keyboard and mouse via DWC2 driver SD card via EMMC driver 1920×1080 framebuffer == Further projects == There are other independent projects under the VibeOS name, including an independent development by Ben, also developed using vibe coding, aimed at creating a Unix-like operating system for educational purposes. Another project is Vib-OS, an operating system also built using vibe coding, capable of booting on a Raspberry Pi. It offers a desktop environment with a customizable wallpaper, a file manager, and a web browser currently in an early stage of development, a functional Doom port, among other features that are not very polished given the state of development.

  Read more →
• 

  Commercial skipping

  Commercial skipping is a feature of some digital video recorders that makes it possible to automatically skip commercials in recorded programs. This feature created controversy, with major television networks and movie studios claiming it violates copyright and should be banned. == History == After the video cassette recorder (VCR) became popular in the 1980s, the television industry began studying the impact of users fast forwarding through commercials. Advertising agencies fought the trend by making them more entertaining. For many years, video recorders manufactured for the Japanese market have been able to skip advertisements automatically, which is done by detecting when foreign language audio overdub tracks provided for many programmes go silent, as advertisements were broadcast with a single language only. The first digital video recorder (DVR) with a built-in commercial skipping feature was ReplayTV with its "4000 Series" and "5000 Series" units. In 2002, the main television networks and movie studios sued ReplayTV, claiming that skipping advertisements during replay violates copyright. Later, five owners of ReplayTV represented by Electronic Frontier Foundation and attorneys Ira Rothken and Richard Wiebe countersued, asking the federal judge to uphold consumers' rights to record TV shows and skip commercials, claiming that features like commercial skipping help parents protect their kids from excessive consumerism. ReplayTV ended up filing for bankruptcy in 2003 after fighting a copyright infringement suit over the ReplayTV's ability to skip commercials. === Commercial skipping software === In addition to the DVR devices which existed in the private market since the late 1990s, towards the mid-2000s, due to the significant advances in home computers, Home theater PCs started gaining popularity in the private market and many users began using their Home theater PCs in their living room for entertainment purposes. Following this, many DVR programs were developed, including popular programs such as Windows Media Center, which contained all of the features of the DVR devices in addition to advanced features such as HDTV and the use of Multiple TV Tuner Cards. Some independent developers began developing independent software capable of skipping the commercial segments when playing recorded videos, and permanently removing the commercial segments from recorded video files. By 2014, many DVR programs such as Windows Media Center, SageTV and MythTV had the capability to skip commercials segments in recorded TV broadcasts after installing third-party add-ons such as DVRMSToolbox, Comskip and ShowAnalyzer, which use various advanced techniques to locate the commercial segments in the video files and save their locations to text files. The text files can also be fed into programs such as MEncoder or DVRMSToolboxGUI which can delete the commercial segments from the recorded video files. A few third-party tools such as MCEBuddy automate detection and removal/marking of commercials. One of the weaknesses of commercial skippers is that, operating automatically, they may misidentify program material as a commercial. Some programs like MCEBuddy provide the ability to fine-tune commercial detection for groups of files (e.g. by channel or country) and provide tools to manually fine-tune commercial segments for individual files. In May 2012, the US Dish Network began offering a DVR with what it calls AutoHop. The device would automatically skip commercials when displaying programming that the viewer had previously recorded with the PrimeTime Anytime feature. It does not skip ads on any live programs. US broadcasters were angered at the news, and FOX embarked on legal action. Most, but not all, of Fox's claims were dismissed; ultimately an agreement was reached whereby AutoHop would only become available for Fox stations seven days after a program is transmitted; terms of the settlement were not disclosed. == The future of TV advertisements == The introduction of digital video recorders and services with skipping and fast-forward capabilities enables viewers to avoid viewing interruptive advertisements in recorded programs, either manually or automatically. While advertising separate to television shows can be skipped, advertising in TV shows themselves ("product placement") cannot be skipped. Streaming services such as Hulu show shorter advertisements with a countdown timer and tailored to the viewers interests, asking interactive questions like "Is this ad relevant to you?".

  Read more →
• 

  Data augmentation

  Data augmentation is a statistical technique which allows maximum likelihood estimation from incomplete data. Data augmentation has important applications in Bayesian analysis, and the technique is widely used in machine learning to reduce overfitting when training machine learning models, achieved by training models on several slightly-modified copies of existing data. == Synthetic oversampling techniques for traditional machine learning == Synthetic Minority Over-sampling Technique (SMOTE) is a method used to address imbalanced datasets in machine learning. In such datasets, the number of samples in different classes varies significantly, leading to biased model performance. For example, in a medical diagnosis dataset with 90 samples representing healthy individuals and only 10 samples representing individuals with a particular disease, traditional algorithms may struggle to accurately classify the minority class. SMOTE rebalances the dataset by generating synthetic samples for the minority class. For instance, if there are 100 samples in the majority class and 10 in the minority class, SMOTE can create synthetic samples by randomly selecting a minority class sample and its nearest neighbors, then generating new samples along the line segments joining these neighbors. This process helps increase the representation of the minority class, improving model performance. == Data augmentation for image classification == When convolutional neural networks grew larger in mid-1990s, there was a lack of data to use, especially considering that some part of the overall dataset should be spared for later testing. It was proposed to perturb existing data with affine transformations to create new examples with the same labels, which were complemented by so-called elastic distortions in 2003, and the technique was widely used as of 2010s. Data augmentation can enhance CNN performance and acts as a countermeasure against CNN profiling attacks. Data augmentation has become fundamental in image classification, enriching training dataset diversity to improve model generalization and performance. The evolution of this practice has introduced a broad spectrum of techniques, including geometric transformations, color space adjustments, and noise injection. === Geometric Transformations === Geometric transformations alter the spatial properties of images to simulate different perspectives, orientations, and scales. Common techniques include: Affine Transformation Rotation: Rotating images by a specified degree to help models recognize objects at various angles. Reflection: Reflecting images horizontally or vertically to introduce variability in orientation. Translation: Shifting images in different directions to teach models positional invariance. Scaling Shear Mapping Cropping: Removing sections of the image to focus on particular features or simulate closer views. Elastic Distortion Morphing within the same class: Generating new samples by applying morphing techniques between two images belonging to the same class, thereby increasing intra-class diversity. === Color Space Transformations === Color space transformations modify the color properties of images, addressing variations in lighting, color saturation, and contrast. Techniques include: Brightness Adjustment: Varying the image's brightness to simulate different lighting conditions. Contrast Adjustment: Changing the contrast to help models recognize objects under various clarity levels. Saturation Adjustment: Altering saturation to prepare models for images with diverse color intensities. Color Jittering: Randomly adjusting brightness, contrast, saturation, and hue to introduce color variability. === Noise Injection === Injecting noise into images simulates real-world imperfections, teaching models to ignore irrelevant variations. Techniques involve: Gaussian Noise: Adding Gaussian noise mimics sensor noise or graininess. Salt and Pepper Noise: Introducing black or white pixels at random simulates sensor dust or dead pixels. == Data augmentation for signal processing == Residual or block bootstrap can be used for time series augmentation. === Biological signals === Synthetic data augmentation is of paramount importance for machine learning classification, particularly for biological data, which tend to be high dimensional and scarce. The applications of robotic control and augmentation in disabled and able-bodied subjects still rely mainly on subject-specific analyses. Data scarcity is notable in signal processing problems such as for Parkinson's Disease Electromyography signals, which are difficult to source - Zanini, et al. noted that it is possible to use a generative adversarial network (in particular, a DCGAN) to perform style transfer in order to generate synthetic electromyographic signals that corresponded to those exhibited by sufferers of Parkinson's Disease. The approaches are also important in electroencephalography (brainwaves). Wang, et al. explored the idea of using deep convolutional neural networks for EEG-Based Emotion Recognition, results show that emotion recognition was improved when data augmentation was used. A common approach is to generate synthetic signals by re-arranging components of real data. Lotte proposed a method of "Artificial Trial Generation Based on Analogy" where three data examples x 1 , x 2 , x 3 {\displaystyle x_{1},x_{2},x_{3}} provide examples and an artificial x s y n t h e t i c {\displaystyle x_{synthetic}} is formed which is to x 3 {\displaystyle x_{3}} what x 2 {\displaystyle x_{2}} is to x 1 {\displaystyle x_{1}} . A transformation is applied to x 1 {\displaystyle x_{1}} to make it more similar to x 2 {\displaystyle x_{2}} , the same transformation is then applied to x 3 {\displaystyle x_{3}} which generates x s y n t h e t i c {\displaystyle x_{synthetic}} . This approach was shown to improve performance of a Linear Discriminant Analysis classifier on three different datasets. Current research shows great impact can be derived from relatively simple techniques. For example, Freer observed that introducing noise into gathered data to form additional data points improved the learning ability of several models which otherwise performed relatively poorly. Tsinganos et al. studied the approaches of magnitude warping, wavelet decomposition, and synthetic surface EMG models (generative approaches) for hand gesture recognition, finding classification performance increases of up to +16% when augmented data was introduced during training. More recently, data augmentation studies have begun to focus on the field of deep learning, more specifically on the ability of generative models to create artificial data which is then introduced during the classification model training process. In 2018, Luo et al. observed that useful EEG signal data could be generated by Conditional Wasserstein Generative Adversarial Networks (GANs) which was then introduced to the training set in a classical train-test learning framework. The authors found classification performance was improved when such techniques were introduced. === Mechanical signals === The prediction of mechanical signals based on data augmentation brings a new generation of technological innovations, such as new energy dispatch, 5G communication field, and robotics control engineering. In 2022, Yang et al. integrate constraints, optimization and control into a deep network framework based on data augmentation and data pruning with spatio-temporal data correlation, and improve the interpretability, safety and controllability of deep learning in real industrial projects through explicit mathematical programming equations and analytical solutions.

  Read more →
• 

  Attention inequality

  Attention inequality is the inequality of distribution of attention across users on social networks, people in general, and for scientific papers. Yun Family Foundation introduced "Attention Inequality Coefficient" as a measure of inequality in attention and arguments it by the close interconnection with wealth inequality. == Relationship to economic inequality == Attention inequality is related to economic inequality since attention is an economically scarce good. The same measures and concepts as in classical economy can be applied for attention economy. The relationship develops also beyond the conceptual level—considering the AIDA process, attention is the prerequisite for real monetary income on the Internet. On data of 2018, a significant relationship between likes and comments on Facebook to donations is proven for non-profit organizations. == Attention economy == The attention economy refers to the practice of maximizing the attention users give to a product for advertising-related reasons. Attention economy remains one of the most common forms of advertising, and has been steadily increasing thanks to new technologies such as television, internet and social media. It is one of the most widely-used approaches to economy for its effectiveness for maximising the noticeability of a certain product. == Attention inequality in social media == In social media, attention inequality refers to the unequal distribution of users' attention on social media platforms. This means that instead of an equal distribution of attention, fewer sources receive a disproportionate share of attention, leaving many unnoticed. This phenomenon is possibly the result of social media algorithms, which are commonly designed to drive maximum engagement. This phenomenon is a large factor in the polarization and creation of echo-chambers. Social media algorithms tend to note content that is already performing well and display it to more users, while content that is equally engaging or well-made is not recommended to users. Posts that trigger strong emotions usually out-perform more "uncontroversial" content. When many users interact with the post, it signals the algorithm that the specific post drives engagement. The algorithm then tends to recommend that type of content to an exponential number of people, potentially outperforming "un-emotional" content. These factors, when combined, tend to create an unequal social media environment. == Attention inequality in science == According to a recent 2025 study about research inequality among scientists published in Information Processing and Management, scientific discourse is restricted to a small group of connected scientists, and is frequently not an accurate representation of the whole scientific community. Using citation-network analysis in the fields of nanoscience and chemical physics, the study claims that a group of connected scientists has a significant notability in the scientific community. The calculated connection strength between these scientists is estimated to be about 4.5, the study also says that these authors cite each other four times more often than would be predicted in a random network, whereas ordinary scientists that exist outside of this group only reach an estimated connection strength of 0.9. The study findings suggest that that scientific attention is not distributed by merit, but rather by the connectedness of the scientists involved in the research. == Extent == As data of 2008 shows, 50% of the attention is concentrated on approximately 0.2% of all hostnames, and 80% on 5% of hostnames. The Gini coefficient of attention distribution lay in 2008 at over 0.921 for such commercial domains names as ac.jp and at 0.985 for .org-domains. The Gini coefficient was measured on Twitter in 2016 for the number of followers as 0.9412, for the number of mentions as 0.9133, and for the number of retweets as 0.9034. For comparison, the world's income Gini coefficient was 0.68 in 2005 and 0.904 in 2018. More than 96% of all followers, 93% of the retweets, and 93% of all mentions are owned by 20% of Twitter. == Causes == At least for scientific papers, today's consensus states that inequality is unexplainable by variations of quality and individual talent. The Matthew effect plays a significant role in the emergence of attention inequality—those who already enjoy large amounts of attention get even more attention, and those who do not lose even more. Ranking algorithms based on relevance to the user have been found to alleviate the inequality of the number of posts across topics.

  Read more →
• 

  T.38

  T.38 is an ITU recommendation for allowing transmission of fax over IP networks (FoIP) in real time. == History == The T.38 fax relay standard was devised in 1998 as a way to transport faxes across IP networks between existing Group 3 (G3) fax terminals. T.4 and related fax standards were published by the ITU in 1980, before the rise of the Internet. In the late 1990s, VoIP, or voice over IP, began to gain ground as an alternative to the conventional public switched telephone network (PSTN). However, because most VoIP systems are optimized (through their use of aggressive lossy bandwidth-saving compression) for voice rather than data calls, conventional fax machines worked poorly or not at all on them due to the network impairments such as delay, jitter, packet loss, and so on. Thus, some way of transmitting fax over IP was needed. == Overview == In practical scenarios, a T.38 fax call has at least part of the call being carried over PSTN, although this is not required by the T.38 definition, and two T.38 devices can send faxes to each other. This particular type of device is called Internet-Aware Fax device, or IAF, and it is capable of initiating or completing a fax call towards the IP network. The typical scenario where T.38 is used is – T.38 fax relay – where a T.30 fax device sends a fax over PSTN to a T.38 fax gateway which converts or encapsulates the T.30 protocol into a T.38 data stream. This is then sent either to a T.38-enabled end point such as fax machine or fax server or another T.38 gateway that converts it back to a PSTN PCM or analog signal and terminates the fax on a T.30 device. The T.38 recommendation defines the use of both TCP and UDP to transport T.38 packets. Implementations tend to use UDP, due to TCP's requirement for acknowledgement packets and resulting retransmission during packet loss, which introduces delays. When using UDP, T.38 copes with packet loss by using redundant data packets. T.38 is not a call setup protocol, thus the T.38 devices need to use standard call setup protocols to negotiate the T.38 call, e.g. H.323, SIP & MGCP. == Operation == There are two primary ways that fax transactions are conveyed across packet networks. The T.37 standard specifies how a fax image is encapsulated in e-mail and transported, ultimately, to the recipient using a store-and-forward process through intermediary entities. T.38, however, defines a protocol that supports the use of the T.30 protocol in both the sender and recipient terminals. (See diagram above.) T.38 lets one transmit a fax across an IP network in real time, just as the original G3 fax standards did for the traditional (time-division multiplexed (TDM)) network, also called the public switched telephone network or PSTN. A special protocol is needed for real-time fax over IP (Internet Protocol) since existing fax terminals only supported PSTN connections, where the information flow was generally smooth and uninterrupted, as opposed to the jittery arrival of IP packets. The trick was to come up with a protocol that makes the IP network “invisible” to the endpoint fax terminals, which would mean the user of a legacy fax terminal need not know that the fax call was traversing an IP network. The network interconnections supported by T.38 are shown above. The two fax terminals on either side of the figure communicate using the T.30 fax protocol published by the ITU in 1980. Interconnection of the PSTN with the IP packet network requires a “gateway” between the PSTN and IP networks. PSTN-IP Gateways support TDM voice on the PSTN side and VoIP and FoIP on the packet side. For voice sessions, the gateway will take in voice packets on the IP side, accumulate a few packets to ensure a smooth flow of TDM data upon their release, and then meter them out over TDM where they eventually are heard by a human or stored on a computer for later playback. The gateway employs packet-management techniques to enhance the quality of the speech in the presence of network errors by taking advantage of the natural ability of a listener to not really hear the occasional missing or repeated packet. But facsimile data are transmitted by modems, which aren't as forgiving as the human ear is for speech. Missing packets will often cause a fax session to fail at worst or create one or more image lines in error at best. So the job of T.38 is to “fool” the terminal into “thinking” that it's communicating directly with another T.30 terminal. It will also correct for network delays with so-called spoofing techniques, and missing or delayed packets with fax-aware buffer-management techniques. Spoofing refers to the logic implemented in the protocol engine of a T.38 relay that modifies the protocol commands and responses on the TDM side to keep network delays on the IP side from causing the transaction to fail. This is done, for example, by padding image lines or deliberately causing a message to be re-transmitted to render network delays transparent to the sending/receiving fax terminals. Networks that do not have packet loss or excessive delay can exhibit acceptable fax performance without T.38, provided the PCM clocks in all gateways are of very high accuracy (explained below). T.38 not only removes the effect of PCM clocks not being synchronized, but also reduces the required network bandwidth by a factor of 10, while it corrects for packet loss and delay. === Bandwidth reduction === As shown in the diagram below, a T.38 gateway is composed of two primary elements: the fax modems and the T.38 subsystem. The fax modems modulate and demodulate the PCM samples of the analog data, turning the sampled-data representation of the fax terminal's analog signal to its binary translation, and vice versa. The PSTN network samples the analog signal of a voice or modem signal (it doesn't know the difference) 8,000 times per second (SPS), and encodes them as 8-bit data bytes. This means 8000 samples-per-second times 8-bits per sample, or 64,000 bits per second (bit/s) to represent the modem (or voice) data in one direction. For both directions the modem transaction consumes 128,000 bits of network bandwidth. However, the typical modem in a fax terminal transmits the image data at 33,600 bit/s, so if the analog data are first converted to the digital content they represent, only 33,600 bits (plus network overhead of a few bytes) are needed. And since T.30 fax is a half-duplex protocol, the network is only needed for one direction at a time. Refer to RFC 3261 === PCM clock synchronization === In the diagram above, there is a sample-rate clock in the fax terminal and one in the gateway's modems that is used to trigger the sampling of the analog line 8,000 times per second. These clocks are usually quite accurate, but in some low-cost terminal adapters (a one or two-line gateway) the PCM clock can be surprisingly inaccurate. If the terminal is sending data to the gateway, and the gateway's clock is too slow, the buffers (jitter buffers) in the gateway will eventually overflow, causing the transaction to fail. Since the difference is often quite small, this problem occurs on long, detailed fax images giving the clocks more time to cause the jitter buffer in gateway to either underflow or overflow, which is just the same as missing or duplicated packets. === Packet loss === T.38 provides facilities to eliminate the effects of packet loss through data redundancy. When a packet is sent, either zero, one, two, three, or even more of the previously sent packets are repeated. (The specification does not impose a limit.) This increases the network bandwidth required (it's still much less than not using T.38) but it allows the receiving gateway to reconstruct the complete packet sequence, even with a fairly high level of packet loss. == Related standards == T.4 is the umbrella specification for fax. It specifies the standard image sizes, two forms of image-data compression (encoding), the image-data format, and references, T.30 and the various modem standards. T.6 specifies a compression scheme that reduces the time required to transmit an image by roughly 50-percent. T.30 specifies the procedures that a sending and receiving terminal use to set up a fax call, determine the image size, encoding, and transfer speed, the demarcation between pages, and the termination of the call. T.30 also references the various modem standards. V.21, V.27ter, V.29, V.17, V.34: ITU modem standards used in facsimile. The first three were ratified prior to 1980, and were specified in the original T.4 and T.30 standards. V.34 was published for fax in 1994. T.37 The ITU standard for sending a fax-image file via e-mail to the intended recipient of a fax. G.711 pass through - this is where the T.30 fax call is carried in a VoIP call encoded as audio. This is sensitive to network packet loss, jitter and clock synchronization. When using voice high-compression encoding techniques such as, but not limited to, G.729, some fax tonal signa

  Read more →
• 

  Online exhibition

  An online exhibition, also referred to as a virtual exhibition, online gallery, cyber-exhibition, is an exhibition whose venue is cyberspace. Museums and other organizations create online exhibitions for many reasons. For example, an online exhibition may: expand on material presented at, or generate interest in, or create a durable online record of, a physical exhibition; save production costs (insurance, shipping, installation); solve conservation/preservation problems (e.g., handling of fragile or rare objects); reach lots more people: "Access to information is no longer restricted to those who can afford travel and museum visits, but is available to anyone who has access to a computer with an Internet connection. Unlike physical exhibitions, online exhibitions are not restricted by time; they are not forced to open and close but may be available 24 hours a day. In the nonprofit world, many museums, libraries, archives, universities, and other cultural organizations create online exhibitions. A database of such exhibitions is Library and Archival Exhibitions on the Web. Online exhibition organizers may use techniques such as marquee text, display advertisements, and in-event emails to engage patrons. Various guides have been published to help organizations create effective online exhibitions. The earliest museum with a physical existence to create a programme of substantial online exhibitions with high resolution images of artefacts was the Museum of the History of Science in Oxford, the first of which, The Measurers: a Flemish Image of Mathematics in the Sixteenth Century and an exhibition of early photographs, were published on 21 August 1995. == Examples of online exhibitions == International Museum of Women is an online-only museum that does not have a physical building and instead offers online exhibitions about women's issues globally as well as an online community. Online exhibitions include "Imagining Ourselves" (launched 2006) about women's identity, "Women, Power and Politics" (2008), and "Economica: Women and the Global Economy" (2009). Tucson LGBTQ Museum is an online-only museum that does not have a physical building and instead offers online exhibitions about LGBTQ history. The online photographic, audio, video, text, and other historical exhibitions include exhibits from the 1700s to the present day. The effort began in the summer of 1967 and spanned almost 50 years. International New Media Gallery (INMG) is an online museum specialising in moving image and screen-based art. The INMG is dedicated to exploring current debates and topics in art history: touching on areas such as migration, war, environmental activism and the internet itself. The gallery publishes extensive academic catalogues alongside its exhibitions. It also hosts spaces for discussion and debate, both online and offline. Virtual Museum of Modern Nigerian Art – the VMMNA is the first of its kind in Africa. Hosted by the Pan-African University, Lagos, Nigeria this virtual museum offers a good view of the development on Nigerian Art in the past fifty years.

  Read more →
• 

  Attention (machine learning)

  In machine learning, attention is a method that determines the importance of each component in a sequence relative to the other components in that sequence. In natural language processing, importance is represented by "soft" weights assigned to each word in a sentence. More generally, attention encodes vectors called token embeddings across a fixed-width sequence that can range from tens to millions of tokens in size. Unlike "hard" weights, which are computed during the backwards training pass, "soft" weights exist only in the forward pass and therefore change with every step of the input. Earlier designs implemented the attention mechanism in a serial recurrent neural network (RNN) language translation system, but a more recent design, namely the transformer, removed the slower sequential RNN and relied more heavily on the faster parallel attention scheme. Inspired by ideas about attention in humans, the attention mechanism was developed to address the weaknesses of using information from the hidden layers of recurrent neural networks. Recurrent neural networks favor information contained in words at the end of a sentence and thus deemed more recent, thereby tending to attenuate the significance and associated predictive weight assigned to information earlier in the sentence. Attention allows a token equal access to any part of a sentence directly, rather than only through the previous state. == History == Additional surveys of the attention mechanism in deep learning are provided by Niu et al. and Soydaner. The major breakthrough came with self-attention, where each element in the input sequence attends to all others, enabling the model to capture global dependencies. This idea was central to the Transformer architecture, which replaced recurrence with attention mechanisms. As a result, Transformers became the foundation for models like BERT, T5 and generative pre-trained transformers (GPT). == Overview == The modern era of machine attention was revitalized by grafting an attention mechanism (Fig 1. orange) to an Encoder-Decoder. Figure 2 shows the internal step-by-step operation of the attention block (A) in Fig 1. === Interpreting attention weights === In translating between languages, alignment is the process of matching words from the source sentence to words of the translated sentence. Networks that perform verbatim translation without regard to word order would show the highest scores along the (dominant) diagonal of the matrix. The off-diagonal dominance shows that the attention mechanism is more nuanced. Consider an example of translating I love you to French. On the first pass through the decoder, 94% of the attention weight is on the first English word I, so the network offers the word je. On the second pass of the decoder, 88% of the attention weight is on the third English word you, so it offers t'. On the last pass, 95% of the attention weight is on the second English word love, so it offers aime. In the I love you example, the second word love is aligned with the third word aime. Stacking soft row vectors together for je, t', and aime yields an alignment matrix: Sometimes, alignment can be multiple-to-multiple. For example, the English phrase look it up corresponds to cherchez-le. Thus, "soft" attention weights work better than "hard" attention weights (setting one attention weight to 1, and the others to 0), as we would like the model to make a context vector consisting of a weighted sum of the hidden vectors, rather than "the best one", as there may not be a best hidden vector. == Variants == Many variants of attention implement soft weights, such as fast weight programmers, or fast weight controllers (1992). A "slow" neural network outputs the "fast" weights of another neural network through outer products. The slow network learns by gradient descent. It was later renamed as "linearized self-attention". Bahdanau-style attention, also referred to as additive attention, Luong-style attention, which is known as multiplicative attention, Early attention mechanisms similar to modern self-attention were proposed using recurrent neural networks. However, the highly parallelizable self-attention was introduced in 2017 and successfully used in the Transformer model, positional attention and factorized positional attention. For convolutional neural networks, attention mechanisms can be distinguished by the dimension on which they operate, namely: spatial attention, channel attention, or combinations. These variants recombine the encoder-side inputs to redistribute those effects to each target output. Often, a correlation-style matrix of dot products provides the re-weighting coefficients. In the figures below, W is the matrix of context attention weights, similar to the formula in Overview section above. == Optimizations == === Flash attention === The size of the attention matrix is proportional to the square of the number of input tokens. Therefore, when the input is long, calculating the attention matrix requires a lot of GPU memory. Flash attention is an implementation that reduces the memory needs and increases efficiency without sacrificing accuracy. It achieves this by partitioning the attention computation into smaller blocks that fit into the GPU's faster on-chip memory, reducing the need to store large intermediate matrices and thus lowering memory usage while increasing computational efficiency. === FlexAttention === FlexAttention is an attention kernel developed by Meta that allows users to modify attention scores prior to softmax and dynamically chooses the optimal attention algorithm. == Applications == Attention is widely used in natural language processing, computer vision, and speech recognition. In NLP, it improves context understanding in tasks like question answering and summarization. In vision, visual attention helps models focus on relevant image regions, enhancing object detection and image captioning. === Attention maps as explanations for vision transformers === From the original paper on vision transformers (ViT), visualizing attention scores as a heat map (called saliency maps or attention maps) has become an important and routine way to inspect the decision making process of ViT models. One can compute the attention maps with respect to any attention head at any layer, while the deeper layers tend to show more semantically meaningful visualization. Attention rollout is a recursive algorithm to combine attention scores across all layers, by computing the dot product of successive attention maps. Because vision transformers are typically trained in a self-supervised manner, attention maps are generally not class-sensitive. When a classification head is attached to the ViT backbone, class-discriminative attention maps (CDAM) combines attention maps and gradients with respect to the class [CLS] token. Some class-sensitive interpretability methods originally developed for convolutional neural networks can be also applied to ViT, such as GradCAM, which back-propagates the gradients to the outputs of the final attention layer. Using attention as basis of explanation for the transformers in language and vision is not without debate. While some pioneering papers analyzed and framed attention scores as explanations, higher attention scores do not always correlate with greater impact on model performances. == Mathematical representation == === Standard scaled dot-product attention === For matrices: Q ∈ R m × d k , K ∈ R n × d k {\displaystyle Q\in \mathbb {R} ^{m\times d_{k}},K\in \mathbb {R} ^{n\times d_{k}}} and V ∈ R n × d v {\displaystyle V\in \mathbb {R} ^{n\times d_{v}}} , the scaled dot-product, or QKV attention, is defined as: Attention ( Q , K , V ) = softmax ( Q K T d k ) V ∈ R m × d v {\displaystyle {\text{Attention}}(Q,K,V)={\text{softmax}}\left({\frac {QK^{T}}{\sqrt {d_{k}}}}\right)V\in \mathbb {R} ^{m\times d_{v}}} where T {\displaystyle {}^{T}} denotes transpose and the softmax function is applied independently to every row of its argument. The matrix Q {\displaystyle Q} contains m {\displaystyle m} queries, while matrices K , V {\displaystyle K,V} jointly contain an unordered set of n {\displaystyle n} key-value pairs. Value vectors in matrix V {\displaystyle V} are weighted using the weights resulting from the softmax operation, so that the rows of the m {\displaystyle m} -by- d v {\displaystyle d_{v}} output matrix are confined to the convex hull of the points in R d v {\displaystyle \mathbb {R} ^{d_{v}}} given by the rows of V {\displaystyle V} . To understand the permutation invariance and permutation equivariance properties of QKV attention, let A ∈ R m × m {\displaystyle A\in \mathbb {R} ^{m\times m}} and B ∈ R n × n {\displaystyle B\in \mathbb {R} ^{n\times n}} be permutation matrices; and D ∈ R m × n {\displaystyle D\in \mathbb {R} ^{m\times n}} an arbitrary matrix. The softmax function is permutation equivariant in the sense that: softmax ( A D B ) = A softmax ( D ) B {\displays

  Read more →
• 

  International World Wide Web Conference Committee

  The International World Wide Web Conference Committee (abbreviated as IW3C2 also written as IW3C2) is a professional non-profit organization registered in Switzerland (Article 60ff of the Swiss Civil Code) that promotes World Wide Web research and development. The IW3C2 organizes and hosts the annual World Wide Web Conference in conjunction with the W3C. The IW3C2 was founded by Joseph Hardin and Robert Cailliau at a meeting held in Boston, United States, on 14 August 1994 to prepare for the upcoming Second International World Wide Web Conference in Chicago. The IW3C2 formally became an incorporated entity in May 1996 at the fifth conference in Paris, France. The organization is governed by laws of the Swiss Confederation and the By-laws. == Abbreviation == The abbreviation for the International World Wide Web Conference Committee as IW3C2 is as follow: I- The I is represents the leading I in International. W3- The W3 represents the three 3 leading W's in World Wide Web. C2- The C2 represents the three 2 leading C's in Conference Committee. == Mission == The mission of the IW3C2 is: To coordinate the organization and planning of the international WWW conference series and ensure that it remains the foremost conference addressing World Wide Web research and development; To promote a collaborative spirit among conference attendees that is essential to the success of the series; To ensure the global geographical diversity of conference sites and provide support to local organizers at those sites; To make sure that all content arising from these conferences and forums is permanently and openly available on the widest possible scale; To preserve the history of the conference series; To encourage the global development of the World Wide Web through collaboration with WWW standards organizations; To provide a permanent, broad-based international body to achieve these purposes. == Conferences == The conferences are organized by the IW3C2 in collaboration with local organizing committees and technical program committees. The series provides an open forum in which all opinions can be presented, subject to a strict process of peer review. The proceedings of the conference are published in the ACM Digital Library. === Endorsed conferences === The IW3C2 has endorsed regional conferences devoted to a special topic of the Web by working with endorsed conferences on cross-promotion, publicity and programs. == Membership == Members of the IW3C2 are ordinary members, ex officio members, non-voting members, and officers. === Ordinary members === Ordinary members are elected for a period of 3 years during a general meeting. Members are nominated due to their recognition in the WWW community and represent themselves. Members can be re-elected only after at least one year of absence. The following are the founding members at the time when IW3C2 was officially incorporated in May 1996: Jean-François Abramatic Tim Berners-Lee Robert Cailliau Dale Dougherty Ira Goldstein Joseph Hardin Tim Krauskopf Detlef Krömker Corinne Moore R. P. Channing Rodgers Albert Vezza Stuart Weibel Yuri Rubinsky (died prior to incorporation) The following are the current (April 2016) ordinary members: Robin Chen Chin-Wan Chung Allan Ellis Wendy Hall - IW3C2 Chair Ivan Herman Arun Iyengar - IW3C2 Vice Chair Irwin King Yoelle Maarek Luc Mariaux - IW3C2 Treasurer Daniel Schwabe - IW3C2 Vice-Chair === Ex officio members === Ex officio members are selected from the immediate past conference general co-chairs and from future conference co-chairs. Their term expires one year after the conference they organized. Ex officio members can be elected as ordinary members. The following are current (April 2016) ex officio members and the conference with which they are affiliated: Jacqueline Bourdeau - WWW2016 James Hendler - WWW2016 Rick Barrett - WWW2017 Rick Cummings - WWW2017 Laurent Flory - WWW2018 Fabien Gandon - WWW2018 === Officers === The IW3C2 officers consist of a chairperson, a vice-chair (chairperson-elect), a secretary, a treasurer, and other appointees. Officers are elected during a general meeting (usually at the annual WWW conference) and serve for one year. They can be re-elected an indefinite number of times. == The Seoul Test of Time Award == This annual award, presented at the WWW conference, is made possible by a generous contribution from the organizers of WWW2014 (Seoul Korea). Recipients are determined by the IW3C2 and honor the author, or authors, of a paper presented at a previous WWW conference that has "stood the test of time." The first award, announced at WWW2015 (Florence Italy), recognized Sergey Brin and Larry Page, the founders of Google. The recipients of the WWW2016 award are LinkIn scientist Dr. Badrul Sarwar and University of Minnesota professors George Karypis, Joseph Konstan, and John Riedl (posthumous) for their work in item-item collaborative filtering.

  Read more →
• 

  Digital Cinema Initiatives

  Digital Cinema Initiatives, LLC (DCI) is a consortium of major motion picture studios, formed to establish specifications for a common systems architecture for digital cinema systems. The organization was formed in March 2002 by Metro-Goldwyn-Mayer, Paramount Pictures, Sony Pictures, 20th Century Studios, Universal Studios, Walt Disney Studios and Warner Bros. Entertainment The primary purpose of DCI is to establish and document specifications for an open architecture for digital cinema that ensures a uniform and high level of technical performance, reliability and quality. By establishing a common set of content requirements, distributors, studios, exhibitors, d-cinema manufacturers and vendors can be assured of interoperability and compatibility. Because of the relationship of DCI to many of Hollywood's key studios, conformance to DCI's specifications is considered a requirement by software developers or equipment manufacturers targeting the digital cinema market. == Specification == On July 20, 2005, DCI released Version 1.0 of its "Digital Cinema System Specification", commonly referred to as the "DCI Specification". The document describes overall system requirements and specifications for digital cinema. Between March 28, 2006, and March 21, 2007, DCI issued 148 errata to Version 1.0. DCI released Version 1.1 of the DCI Specification on April 12, 2007, incorporating the previous 148 errata into the DCI Specification. On April 15, 2007, at the annual NAB Digital Cinema Summit, DCI announced the new version, as well as some future plans. They released the "Stereoscopic Digital Cinema Addendum" to begin to establish 3-D technical specifications in response to the popularity of 3-D stereoscopic films. It was also announced "which studios would take over the leadership roles in DCI after the current leadership term expires at the end of September." Subsequently, between August 27, 2007, and February 1, 2008, DCI issued 100 errata to Version 1.1. So, DCI released Version 1.2 of the DCI Specification on March 7, 2008, again incorporating the previous 100 errata into the specification document. An additional 96 errata were issued by August 30, 2012, so a revised Version 1.2 incorporating those additional errata was approved on October 10, 2012. DCI approved DCI Specification Version 1.3 on June 27, 2018, integrating the 45 errata issued to the previous version into a new document. On July 20, 2020, fifteen years to the day after Version 1.0, DCI issued a new DCI Specification Version 1.4 that assimilated 29 errata issued since Version 1.3. On October 13, 2021, DCI approved a new DCI Specification Version 1.4.1 that integrated the 23 errata that had been issued to DCI Specification Version 1.4. For the convenience of users, DCI also created an online HTML version of DCI Specification, Version 1.4.1. Due to the HTML conversion process, the footnotes in the DCSS now appear as endnotes. The PDF version contains pagination and page numbers whereas the HTML version does not. DCI Specification Version 1.4.2, dated June 15, 2022, includes revisions and refinements respecting Object-Based Audio Essence (OBAE), also known as Immersive Audio Bitstream (IAB). Version 1.4.2 also implements post-show log record collection utilizing SMPTE 430-17 SMS-OMB Communications Protocol Specification. Additionally, Version 1.4.2 incorporated two prior addenda: the Digital Cinema Object-Based Audio Addendum, dated October 1, 2018 and the Stereoscopic Digital Cinema Addendum, Version 1.0, dated July 11, 2007. Users using Version 1.4.2 no longer need to refer to the separate addenda. Previous DCSS versions are archived on the DCI web site. Based on many SMPTE and ISO standards, such as JPEG 2000-compressed image and "broadcast wave" PCM/WAV sound, the DCI Specification explains the route to create an entire Digital Cinema Package (DCP) from a raw collection of files known as the Digital Cinema Distribution Master (DCDM), as well as the specifics of its content protection, encryption, and forensic marking. The DCI Specification also establishes standards for the decoder requirements and the presentation environment itself, such as ambient light levels, pixel aspect and shape, image luminance, white point chromaticity, and those tolerances to be kept. Even though it specifies what kind of information is required, the DCI Specification does not include specific information about how data within a distribution package is to be formatted. Formatting of this information is defined by the Society of Motion Picture and Television Engineers (SMPTE) digital cinema standards and related documents. == Image and audio capability overview == === 2D image === 2048×1080 (2K) at 24 frame/s or 48 frame/s, or 4096×2160 (4K) at 24 frame/s In 2K, for Scope (2.39:1) presentation 2048×858 pixels of the imager is used In 2K, for Flat (1.85:1) presentation 1998×1080 pixels of the imager is used In 4K, for Scope (2.39:1) presentation 4096×1716 pixels of the imager is used In 4K, for Flat (1.85:1) presentation 3996×2160 pixels of the imager is used 12 bits per color component (36 bits per pixel) via dual HD-SDI (encrypted) 10 bits only permitted for 2K at 48 frame/s CIE XYZ color space, gamma-corrected TIFF 6.0 container format (one file per frame) JPEG 2000 compression From 0 to 5 or from 1 to 6 wavelet decomposition levels for 2K or 4K resolutions, respectively Compression rate of 4.71 bits/pixel (2K @ 24 frame/s), 2.35 bits/pixel (2K @ 48 frame/s), 1.17 bits/pixel (4K @ 24 frame/s) 250 Mbit/s maximum image bit rate === Stereoscopic 3D image === 2048×1080 (2K) at 48 frame/s - 24 frame/s per eye (4096×2160 4K not supported) In 2K, for Scope (2.39:1) presentation 2048×858 pixels of the imager is used In 2K, for Flat (1.85:1) presentation 1998×1080 pixels of the imager is used Optionally, in the HD-SDI link only: 12 bit color, YCxCz 4:2:2 (i.e. chroma subsampling in XYZ space), each eye in separate stream === Audio === 24 bits per sample, 48 kHz or 96 kHz Up to 16 channels WAV container, uncompressed PCM DCI has additionally published a document outlining recommended practice for High Frame Rate digital cinema. This document discloses the following proposed frame rates: 60, 96, and 120 frames per second for 2D at 2K resolution; 48 and 60 for stereoscopic 3D at 2K resolution; 48 and 60 for 2D at 4K resolution. The maximum compressed bit rate for support of all proposed frame rates should be 500 Mbit/s. == Related information == The idea for DCI was originally mooted in late 1999 by Tom McGrath, then COO of Paramount Pictures, who applied to the U.S. Department of Justice for anti-trust waivers to allow the joint cooperation of all seven major motion picture studios. Universal Pictures made one of the first feature-length DCPs created to DCI specifications, using their film Serenity. Although it was not distributed theatrically, it had one public screening on November 7, 2005, at the USC Entertainment Technology Center's Digital Cinema Laboratory in the Pacific Theatre, Hollywood. Inside Man (2006) was Universal's first DCP commercial release, and, in addition to 35mm film distribution, was delivered via hard drive to 20 theatres in the United States along with two trailers. The Academy Film Archive houses the Digital Cinema Initiatives, LLC Collection, which includes film and digital elements from DCI's Standard Evaluation Material (StEM), a 12-minute production shot on 35mm and 65mm film, created for vendors and standards organizations to test and evaluate image compression and digital projection technologies.

  Read more →